SA516 Grade 60/70 HIC Tested Plates NACE TM0284-2003 / NACE MR0175 / ISO 15156-2

ASTM A516/516M / ASME SA516/516M GRADE 60/65/70 HIC Tested (Hydrogen Induced Cracking) NACE TM-0284 2003 / NACE MR-0175 / ISO 15156-2, SSCC Tested (Sulphide Stress Corrosion Cracking) NACE TM-0177 2005 / NACE MR-0103 2007, SOHIC (Stress Oriented Hydrogen Induced Cracking) Tested FINE GRAINED PRESSURE VESSEL STEEL PLATES FOR SOUR GAS SERVICE

Hot Rolled Steel ASTM/ASME A/SA 516 Grade 60/70 HIC Tested Plates in accordance with NACE Test Method TM 0284 Latest Edition using a test solution A pH of 3 conforming to NACE TM 0177 Latest Edition
CLR : Crack Length Ratio <5% / <10% / <15%
CTR : Crack Thickness Ratio <1.5% / <3% / <1%
CSR : Crack Sensitivity Ratio <0.5% / <1% / <2%
Test Solution B with pH of 5
CLR : Crack Length Ratio <0.5%
CTR : Crack Thickness Ratio <0.1%
CSR : Crack Sensitivity Ratio <0.05%
ASME SA516/SA516M-07 MT LTV ZT Grade 60/65/70
ASTM A516/A516M-07 MT LTV ZT Grade 60/65/70
ASME Section II Part A Edition 2007 Addenda 2008
ASME SA20/SA20M-08
ASTM A20/A20M-08
ASME SA770/SA770M-04
ASTM E290-97a
NACE MR-0175 / ISO 15156
Condition : Fully Killed, Normalized, Stress-Relieved (PWHT) Post Weld Heat Treatment
Steel Making Process : Open Hearth Furnace / Basic Oxygen Furnace (BOF), Ladle Refining Furnace (LRF), Vacuum Degassed (VD)
Vacuum Treated, Fully Deoxidised, Desulpherised, Dephosphorised
Charpy V-notch Impact Tested
Size tolerance as per EN 10029:1991
Positive thickness tolerance as per EN 10029:1991 Table 1, Class A
Flatness Tolerance as per Table 4, Class N, Category L of EN 10029-1991
Surface Quality as per EN 10163:1991 Part 2, Class A, Subclass-3
Edges : Trimmed / Mill Edge
Ultrasonic as per ASTM A578/578M Level A / Level B
Grain size No.6-8 or finer acc. to ASTM E112-96
Mill certificate acc. to EN 10204 3.1 / EN 10204 3.2 with IBR Form IV

We mainly stock the Plates of following make :

Salzgitter Mannesmann – Germany
ThyssenKrupp Steel – Germany
ThyssenKrupp Stahl – Germany
Dillinger Hutte – Germany
Rautaruukki – Finland
Voestalphine Grobblech – Austria
ISD HUTA – Poland
Corus – U.K
InduSteel – France
InduSteel – Belgium
SSAB – Sweden
Sumitomo Metals – Japan
Kobe Steel – Japan
JFE Steel – Japan
Japan Steel – Japan
Nippon Steel – Japan

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI – 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email – marketing@rolexmetals.com
Website – www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com