Oil-Tempered Clutch & Valve Spring Wire – Leading Importer And Stockholder www.rolexmetals.com

Oil-Tempered Clutch & Valve Spring Wire

We are Stockholder & Distributors of Oil Tempered SiCr-Alloyed Wires for Valve Springs, SWOSC-V Oil Tempered Wire, SWOSC-V OT Wires, SWOSC-VU Oil Tempered Wire, SWOSC-VU OT Wires, SAE 9254 Wire, SAE9254 Wires, SAE 6150 Wire, SAE6150 Wires, SAE 1070 Wire, SAE1070 Wires, SWOSC-VH Oil Tempered Wire, SWOSC-VH OT Wires, HRS7-V Oil Tempered Wire, HRS7-V OT Wires, SWOSC-VT Oil Tempered Wire, SWOSC+VT OT Wires, KHV7 Oil Tempered Wire, KHV7 OT Wire, SWOSC-VX Oil Tempered Wire, SWOSC+VX OT Wires, KHV10N Oil Tempered Wire, KHV10N OT Wires, SWOSC-VXT Oil Tempered Wire, SWOSC+VXT OT Wires, KHV12N Oil Tempered Wire, KHV12N OT Wires, OTEVA 70 Oil Tempered Wire, OTEVA-70 OT Wires, SiCrVMoW Oil-Tempered Wire, SiCrVMo Oil-Tempered Wire, SiCrVNi Oil-Tempered Wire, SiCrV Oil-Tempered Wire, SiCr Oil-Tempered Wire, SWOSC-VHV Oil-Tempered Wire, SWO-V Oil-Tempered Wire, 75KD SiCrV Oil-Tempered Wire, STATO 75 SiCrV Oil-Tempered Wire, STATO 70 SiCr Oil-Tempered Wire, PENTHOR-864 Oil-Tempered Wire, PENTHOR-854 Oil-Tempered Wire, PENTHOR-843 Oil-Tempered Wire, PENTHOR-842 Oil-Tempered Wire, PENTHOR-811 Oil-Tempered Wire, PENTHOR-911 Oil-Tempered Wire, KISWIRE Oil-Tempered Wire, SUZUKI GARPHYTTAN Oil-Tempered Wire, PENGG USHA MARTIN Oil-Tempered Wire, PENGG AUSTRIA Oil-Tempered Wire, Oil-Tempered Wires for Valve Springs

Our Product	Finish	Size Range (mm)	End Application
AUTO CABLE WIRE	Black/Galvanised	0.13-2.80	Auto Speedometer cable inners & Rolling Quality for Auto cable Outers.
SPRING STEEL WIRE	Black	0.13-4.50	Grades I, II & III for making Springs used in Auto & Engg. Sectors
UPHOLSTRY SPRING WIRE	Black	1.40-4.00	For making Springs in Upholstry & Mattresses
FLEXIBLE SHAFT WIRE	Black	0.30-1.80	Used in making Flexible Shafts
FLOAT WIRES	Black	1.80-2.50	For making Wire Forms used in Auto sector and float-assembly in fuel tanks.
OIL SEAL WIRES	Galavanised	0.20-0.60	Used in making Oil-Seals
HAIR PIN WIRES	Black	0.80-1.60	Used in making Hair-pins
ROPERY WIRES	Black/Galvanized	0.13-3.00	Used in manufacture of Wire Ropes
ACSR CORE WIRES	Galvanized	1.50-4.09	For use as steel reinforcement in Aluminium conductors for Extra High/Normal voltage overhead transmission.

roduct	Size Range (mm)	Specification	Grade	Application
Galvanised Iron (G.I.) (Hot Dipped & Electroplated)	0.63-5.00	IS 280 As per customer’s requirement	Mild Steel	Galvanised wire for General Engineering Purpose, I.E. netting, fencing, barbing and other applications.
Galvanised Steel Strand	7×1.50 to 7×4.75	IS 2141, IS:12776 ASTMA 473, ASTMA 363, BS 183, DIN 48200, 48201, 48202, VEDO 210	Mild Steel / High Carbon, Medium Carbon	Wires for electrical & transmission lines
H.B. Wires for Nails	0.63-10.0	As per Customer’s requirement	Mild Stee	Wires for Nail Industry
Cable Armour Wires (Round)	0.63-4.0	IS 3975, BS 1441 As per customer’s requirement	Low Carbon / Electrode	Wires for Cable and Conductor Industry
Cable Armouring Formed Wire	4×3.4×0.8	IS 3975, BS 1441	Low Carbon / Electrode	Cable Industry
ACSR Core Wire Single	1.50-4.75	IS 398 Part 2&5 ASTMB 498, BS 4565, IEC 209	High Carbon	Wires for Conductor Industry.
ACSR Core Wire Stranded	7×1.5 To 7×4.75	IS 398, ASTM-B 500, BS 215 PART-2	High Carbon	Wires for Conductor Industry
P.C. Single (as drawn)	1.50-5.00	IS 1785-II, ASTM-A 648, BS 2962-SEC I/IV	High Carbon	Wires for Prestressed Concrete Industry
P.C. Single Wire Stress Relieved (Normal Relaxation)	3.00-9.50	IS 1785-I (Plain), IS 6003 (Indented) ASTM-4421, BS 2691 SEC 1/77	High Carbon	For re-enforcement of Concrete Poles & other Concrete Structures)
P.C. Strand 3 Ply Stress Relieved (Normal Relaxation)	3X3.00	IS 6003 ASTM-A 416 BS 3617 JIS-G 3536	High Carbon	For re-enforcement of Concrete Rly. Sleeper.
P.C. Strand 7 Ply Stress Relieved (Normal Relaxation)	6.35-12.50	IS 6006, ASTM – A416 BS 3617, JIS G 3536	High Carbon	For re-enforcement of Concrete Beams in bridges / concrete poles etc.
Bright Spoke Wire	1.80- 4.00	IS 6902, BS 2453 As per customer’s requirement	High Carbon	Wires for Cycle & Two Wheeler Industry
Galvanised Spoke Wire	1.80-4.00	IS 6902, BS 2453 As per customer’s requirement	High Carbon	For making Spokes for Cycles & Two Wheelers.
Cycle Accessories Wire	2.00-10.00	As per customer’s requirement	Mild Steel	Wires for Cycle & Two Wheeler Industry
Shutter Spring Wire	4.00-9.50	As per customer’s requirement	High Carbon	For making Spring of Rolling Shutters
Spring Steel Wire	0.30-8.50	IS 4454 Part 1 GradeI/II/III/IV	High Carbon	Springs
Telegraph Wire	2.00–5.60	IS 279, IS 280	Mild Steel	Telecom Industry
Rope Wire (Black & Galvanised)	0.30-2.00	IS: 1835, BS: 2763 As per customer’s requirement	High Carbon	Rope making & Auto cables
Umbrella Rib	1.50–3.0	As per customer’s requirement	High Carbon	Umbrella Industry
Chain Rivet / Link Wire	3.60-6.00	As per customer’s requirement	Mild Steel 16Mn Cr5 20Mn Cr5 EN 353, 354	Chain & Two-wheeler Industry
Cotton Bailing Wires	3.15-3.66	As per customer’s requirement	High Carbon	For Cotton Bailing industry

Spring Steel – Medium Carbon Wire
Indian Standard	:	IS 4454 Part I, Grade-2
Equivalent International Standards	:	ASTM A 227
UNI 3823 Class B
DIN 17223-1-1.0600
DIN 2076-B
EN 10270-1(SM, DM)
JIS-3522
Chemical Composition
Carbon(C)	:	0.60-0.85
Manganese (Mn)	:	0.80 Max
Silicon (Si)	:	0.15-0.35
Phosphorus (P)	:	0.04 Max
Sulphur(S)	:	0.04 Max


Spring Steel – High Carbon

Indian Standard	:	IS 4454 Part I Grade 3
Equivalent International Standards	:	ASTM A 228
UNI-3823 Class C
DIN 17223-1-1.0200
DIN 2076-C
EN 10270-1-(SH, DH)
JIS – 3522
Chemical Composition
Carbon(C)	:	0.75-1.00
Silicon (Si)	:	0.15-0.35
Manganese (Mn)	:	0.80 Max
Phosphorus (P)	:	0.03(Max)
Sulphur (S)	:	0.03(Max)


Spring Steel – Oil tempered Alloy Steel Wire

Indian Standard	:	IS 4454 Part III, Grade-2D (Chrome Silicon)
Equivalent International Standards	:	ASTM A-401
DIN-17223-2 FDSiCr
DIN-17223-2-VDSiCr
EN-10270-2 FDSiCr
EN 10270-2-VDSiCr
Chemical Composition
Carbon(C)	:	0.50-0.60
Silicon (Si)	:	1.20-1.60
Manganese (Mn)	:	0.50-0.80
Chromium (Cr)	:	0.50-0.80


Stainless Steel Wire

Indian Standard	:	IS 4454 part-IV Gr- 1 & 2
Equivalent International Standards	:	AISI 302
AISI 304
ASTM A 313
DIN 17224
EN 10270-3
Chemical Composition
		GR-1	GR-2
Carbon(C)	:	0.15 Max	0.09 Max
Silicon (Si)	:	1.00 Max	1.00 Max
Manganese (Mn)	:	2.00 Max	1.00 Max
Chromium (Cr)	:	17-19	16.00-18.00
Nickel(Ni)	:	8-10	6.75-7.75

HIGH CARBON SPRING STEEL WIRES

We can supply High Carbon Spring Steel Wires to the customer requirement within the specification as per IS : 4454 (Part-1) – 1981 and IS: 4454 Part 2 – 2001. Wires availbale are Grade I, Grade II, Grade III, Grade IV, Flattening Quality (FQ) in both black and galvanized and Oil tempered (OT wire)/ 2D wires in desired sizes. The wire supplied by us are used for a vast variety of purposes with some of the major ones being:

GRADE

APPLICATION

Grade 1 (As per IS 4454 Part 1 – 1981) /

Grade SL (As per IS 4454 Part 1 – 2001)

1. Auto components after flattening of wire.
2. Steel screen for iron ore and coal industries.
3. Wire shaped products made from wire forming.

Flattening Quality (FQ)

1. Auto cables

2. Formed auto components

Grade 2 (As per IS 4454 Part 1 – 1981) /

Grade SM (As per IS 4454 Part 1 – 2001)

Tension & Torsion springs for use in Industrial / Auto sector

Grade 2 (As per IS 4454 Part 1 – 1981) /

Grade SM (As per IS 4454 Part 1 – 2001)

High precision torsion & Compression spring used in Industrial & Auto sector.

Oil tempered wire (OT wire) – Penthor 811, 843 & 864

(As per IS 4454 Part 2 – 2001)

High precision torsion & Compression spring used in Industrial & Auto sector.

Alloy	C	Mn	P	S	Si	Cr	Other
C1010	.08-.13	.30-.60	0.040	0.050
C1050	.48-.55	.60-.90	0.040	0.050
C1075	.70-.80	.40-.70	0.040	0.050
C1095	.90-1.03	.30-.50	0.040	0.050
HDMB	.45-.85	.30-1.30	0.040	0.050	.15-.35
OTMB	.55-.85	.30-1.20	0.040	0.050	.15-.35
MUSIC WIRE	.70-1.00	.20-.60	0.025	0.030	.10-.30
CHROME SILICON	.51-.59	.60-.80	0.035	0.040	1.20-1.60	.60-.80
CHROME VANADIUM	.48-.53	.70-.90	0.040	0.040	.15-.35	.80-1.10	V .15

Alloy			Characteristics		Typical Specification
C1010	Basic Steel, good formability, not heat treatable			ASTM A-805
C1050	Good formability in the annealed condition, heat treatable to higher hardness,
C1075	higher carbon content contributes to higher hardness			ASTM A-805
C1095
HDMB	Spring wire, suitable for parts subjected to high stress and /or infrequent stress	ASTM A-227
	repetitions
OTMB	Spring wire, similar to HDMB, better suited for some applications because of the	ASTM A-229
	tighter control of the tensile strength and better straightness of OTMB
MUSIC WIRE	Spring wire, good for parts subjected to high stresses and requiring good	ASTM A-228
	thermal properties
CHROME SILICON	Spring wire, high endurance properties at elevated temperatures		ASTM A-401
CHROME VANADIUM	Spring wire, high fatigue properties at elevated temperatures		ASTM A-231

OTEVA® 101 SC, Oil tempered SiCrVMoW-alloyed ultra-high tensile clutch and transmission spring wire for surface nitriding
Product sheet
Description: OTEVA® 101 SC is a Super Clean steel especially intended for the manufacture of clutch and transmission springs and other springs requiring high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 5.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 5.00 mm. Other wire sizes on request.

OTEVA® 91 SC, Oil tempered SiCrVMo-alloyed ultra-high tensile valve spring wire for surface nitriding
Product sheet
Description: OTEVA® 91 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring extremely high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

OTEVA® 90 SC, Oil tempered SiCrVNi-alloyed ultra-high tensile valve spring wire for surface nitriding
Product sheet
IMDS No.:   4982603 / 1
Description:   OTEVA® 90 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring extremely high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

OTEVA® 76 SC, Oil tempered SiCrVNi-alloyed high tensile valve spring wire – Only manufactured in USA and China
Product sheet
Description: OTEVA 76 SC is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. Manufactured as standard in shaved condition and in sizes from Ø 2.00 mm to 6.00 mm, or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

OTEVA® 75 SC, Oil tempered SiCrV-alloyed high tensile valve spring wire
Product sheet
IMDS No.:   47544916 / 1
Description:   OTEVA® 75 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 1.60 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

OTEVA® 70 SC, Oil tempered SiCr-alloyed valve spring wire
Product sheet
IMDS No.:   12364020 / 1
Description:   OTEVA® 70 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperature. The wire is manufactured in shaved or unshaved condition (Ø 6.50 – 14.00 mm in unshaved condition subcontracted) in sizes from Ø 0.50 mm to 6.50 mm, or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

SWOSC-VHV, Oil tempered SiCrV-alloyed high tensile valve spring wire – Only manufactured in China
Product sheet
Description: SWOSC-VHV is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. The wire is manufactured in shaved condition in sizes from Ø 1.60 mm to 6.50 mm, or in egg or elliptical shape (corresponding to round cross section 2.50 mm to 6.50 mm). Other wire sizes on request.

SWOSC-V, Oil tempered SiCr-alloyed valve spring wire – Only manufactured in China
Product sheet
Description: SWOSC-V is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperature. The wire is manufactured in shaved condition in sizes from Ø 1.60 mm to 6.50 mm, or in egg or elliptical shape (corresponding to round cross section 2.50 mm to 6.50 mm). Other wire sizes on request.

75 KD, Oil tempered SiCrV-alloyed clutch and transmission spring wire
Product sheet
Description: 75 KD is especially intended for the manufacture of clutch and transmission springs and similar moderately high fatigue stressed springs. The material has good relaxation properties. The wire is manufactured in sizes from Ø 1.60 to 7.00 mm. Other wire sizes on request.

70 KD, Oil tempered SiCr-alloyed clutch and transmission spring wire
Product sheet
IMDS No.:   673628 / 1
Description:   70 KD is especially intended for the manufacture of clutch and transmission springs and similar moderately high fatigue stressed springs. The material has good relaxation properties. The wire is manufactured in sizes from Ø 0.50 to 7.00 mm.

STATO 75, Oil tempered SiCrV-alloyed spring wire
Product sheet
Description: STATO 75 is especially intended for the manufacture of springs exposed to static or moderately high fatigue stresses. The material has good relaxation properties. The wire is manufactured in sizes from Ø 2.00 mm to 7.00 mm. Other wire sizes on request.

STATO 70, Oil tempered SiCr-alloyed spring wire
Product sheet
Description: STATO 70 is especially intended for the manufacture of springs exposed to static or moderately high fatigue stresses. The material has good relaxation properties. The wire is manufactured in sizes from Ø 0.50 mm to 7.00 mm.

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI – 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email – marketing@rolexmetals.com
Website – www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com