Manufacturer of Materials According to Indian Standard I.S Standard And Specifications

Manufacturer of Materials According to Indian Standard I.S Standard And Specifications

Manufacture of Material According to Indian Standard I.S Standard And Specification
1 IS 8849:1991 Glossary of terms relating to fuel fired industrial furnaces Mar 2012
2 IS 9180:2011 Recommendatins for performance rating of fuel-fired
furnaces (second revision)
3 IS 9444:2007 Code of practice for installation of oil supply units for fuel Mar 2012
fired furnaces (first revision)
4 IS 9977:1998 Design and construction of box type forging furnaces – Mar 2012
Guidelines (first revision)
5 IS 10298:1982 Guidelines for design and construction of mould and core Mar 2011
drying ovens for foundries
6 IS 11462:1985 Mould and core sand dryers rotary type Mar 2011
7 IS 12368:1988 Guidelines for design and construction of hot air Mar 2011 1
generators
8 IS 12392:1988 Code of practice for design manufacture and testing of Mar 2011
metallic recuperators
9 IS 12553:1988 Code of practice for design,construction,installation and Mar 2011
operation of industrial gas/oil burning equipment
10 IS 12826(Part 1):1989 Code of practice for ordering, testing and acceptance of Mar 2011 1
industrial furnaces Part 1 purchaser’s data sheet for
ordering of industrial furnaces
11 IS 12826(Part 2):1990 Part 2 Supplier’s data sheet for ordering of industrial Mar 2012
furnaces
12 IS 12826(Part 3):1990 Part 3 Testing and aceptancce of industrial furnaces Mar 2012
13 IS 14245:1995 Protective atmosphere for heat treatment furnaces – Mar 2012
Recommendations
14 IS 14492:1997 Drying preheating and commissioning of furnace Mar 2012
installations, steam boilers, industrial kilns and chimneys –
Recommendations
15 IS 15562:2005 Design and construction of bogie hearth type heat Mar 2011
treatment furnaces – Guidelines1 DOC.MTD 26(5080) Safety for gas fired furnaces
2 DOC.MTD 26(5081) Safety for oil fired furances
1 IS 10852:2012 Guidelines for storage and transportation of sponge
iron/direct reduced iron(DRI) and hot briquetted iron (HBI)
(first revision)
2 IS 11092:2001 Iron ore pellets for direct reduction processes (second Mar 2011
revision)
3 IS 11093:2001 Iron ore lumps for direct reduction processes (second Mar 2011 1
revision)
4 IS 11284:1985 Method of rotary tube test for iron bearing materials for Mar 2011 1
the manufacture of sponge iron/direct reduced iron(DRI )
5 IS 11285:2001 Various tests on raw materials to be used for coal based Mar 2011
direct rotary kiln direct reduction (first revision)
6 IS 11795:1996 Guidelines for ash softening studies on solid reductants Mar 2012 1
for direct reduction (first revision)
7 IS 11860:1998 Guidelines for non -coking coals for solid reductant Oct 2008 2
based direct reduction in rotary kilns(and other reactors
(first revision)
8 IS 12052:2007 Method for determination of re-oxidation rate of sponge Mar 2012
iron/direct reduced iron(DRI) in contact with humid air
and in direct contact with water (first revision)
9 IS 12263:1987 Method for determination of rigidity of sponge iron/DRI Oct 2008
during transportation and handling
10 IS 12381:1994 Methods of determination of coal (char) reactivity for Mar 2012 1
direct reduction processes (first revision)
11 IS 12668:1989 Melting characterstics of sponge iron/direct reduced iron Mar 2011 1
(DRI)
12 IS 12929:2007 Feedstock (iron oxides and natural gas) for gas based Mar 2012
| ISO 11257:1998 direct reduction processes- guidelines (first revision)
(superseding IS 14373, 14405)
13 * IS 13885:2001 Non-Magnetics/char in sponge iron (DRI)-Methods of Mar 2012 1
determination (first revision)
14 IS 14719:1999 Density of hot briquetted iron (HBI) – Method for Mar 2011 1
determination
15 IS 14795:2000 Method for determination of clustering of feedstock for Mar 2011 1
DR process16 IS 14796:2000 Feedstock for smelting reduction process – guidelines Mar 2011
1
17 IS 14797:2000 Classification of smelting reduction process Mar 2011 1
18 IS 14991:2001 Method of determination of coal char strengths Mar 2012
19 IS 15774:2007 Sponge Iron/Direct Reduction Iron (DRI) hot briquettes Mar 2012 2
iron (HBI) and cold briquettes for steel making
(amelgmating IS 10812, IS 13839 and IS 13905)
1 DOC.MTD 30(4947) Magnetics in char from coal based sponge iron (DRI) –
Methods of determination
2 DOC.MTD 30(5056) Direct reduced iron – Determination of metallic iron –
/ ISO 5416:2006 Bromine-methanol titrimetric method
3 DOC.MTD 30(5057) Direct reduced iron and hot briquetted iron – Sampling
and sampling preparation (based on ISO 10835:2007)
4 DOC.MTD 30(5058) Direct reduced iron – Determination of tumble strength of
hot briquetted iron (HBI) (based on ISO 15967:2000)
5 DOC.MTD 30(5059) Direct reduced iron – Determination of apparent density
and water absorption of hot briquetted iron (HBI) (based
on ISO 15968:2000)
1 DOC.MTD 30(5175) Guidelines for use of synthesis gas from coal gasifier for
production of sponge iron
2 DOC.MTD 30(5174) First Revision of IS 15774
3 DOC.MTD 30(5176) Draft Amendment No,. 1 to IS 11092
4 DOC.MTD 30(5177) Draft Amendment No. 2 to IS 11093
1 IS 916:2000 18 litre square tins (fourth revision) Mar 2011
2 ** IS 1394:1984 Glossary of terms relating to metal containers (third Mar 2011 1
revision)
3 IS 1406:1995 Rectangular tins for liquids (fourth revision) Mar 2011
4 IS 1407:1980 Round paint tins (second revision) Mar 2011
5 * IS 1783(Part 1):1993 Drums,large,fixed ends, Part 1 Grade A drums (third Mar 2011 2
revision)
6 * IS 1783(Part 2):1988 Drums, large, fixed ends, Part 2 Grade B drums (third Mar 2011 1
revision)
7 * IS 1784:1998 Screwed closures for drums (third revision) Mar 2011
8 * IS 1994:1987 Crown closures (second revision) Mar 2011
9 IS 2034:1987 Round open top sanitary cans for butter and cheese Mar 2011
(first revision)
10 IS 2087:1988 Square tins for general purpose (third revision) Mar 2011 1
11 IS 2123:1977 Vial (goldie) seals (first revision) Nov 2008
12 IS 2134:1981 Round tins for general purposes (second revision) Mar 2011
13 IS 2471:1963 Methods of test for metal containers Mar 2011
14 IS 2474:1982 Metal closures for drums (first revision) Mar 2011 3
15 IS 2552:1989 Steel drums (galvanized and ungalvanized) (third Nov 2008 1
revision)
16 IS 3101:1995 Aluminium collapsible tubes (second revision) Nov 2008
17 IS 3259:1966 Methods of sampling of metal containers Mar 2011
19 IS 3575:1993 Bitumen drums (third revision) Mar 2011 2
20 IS 3603:1988 Seamless aluminium bottles (first revision) Mar 2011
21 IS 3680:1987 Round printing ink containers (first revision) Mar 2011
22 IS 4638:1981 Seamless rectangular fish tins (first revision) Mar 2011
23 IS 5241:1987 Shoe polish containers (first revision) Mar 2011 1
24 IS 5682:1991 Open top drums and kegs (first revision) Mar 2011
25 IS 6941:1973 Method for sampling metal closures Nov 2008
26 IS 7182:1973 Methods of tests for aluminium collapsible tubes Nov 2008
27 IS 7852:1975 Eye ointment tubes, small Sep 2006
28 IS 8393:1977 Roll seal pilferproof closures Nov 2008 1
29 * IS 8449:1999 Non-returnable metal aerosol dispensers Mar 2011
30 IS 8469:1977 Methods of tests for flammability of aerosol products Nov 2008
31 IS 8932:1978 Preformed metal screw caps for glass containers Nov 2008
32 IS 8933:1978 Mess tins Mar 2011
33 IS 8996:1988 20 litre steel jerry cans (first revision) Mar 2011
34 IS 9209:1979 Methods of test for the compatibility of aerosol products Mar 2011
with the metal aerosol dispensers
35 * IS 9396(Part 1):1987 Round open top sanitary cans for processed foods, Part Mar 2011
I Tinplate requirements(first revision)
36 IS 9396(Part 2):2012 Round open top sanitary cans for foods and drinks, Part
2 Sizes and general requirements (second revision)
37 IS 9445:1980 Aluminium containers for packing of liquid pesticides Mar 2011 1
(capacity 5 litres and above)
38 IS 9503:1988 Aluminium bottles for packing of liquid pesticides (first Mar 2011 1
revision)
39 IS 9634:1980 Aerosol valves – 25.4 mm diameter Mar 2011
40 IS 9635:1980 Methods for sampling of aerosol valves Mar 2011
41 IS 9976:1981 Method of sampling of open top sanitary (OTS) cans Mar 2011
42 IS 9991:1981 Condensed milk cans Mar 2011
43 IS 9992:1991 Round and rectangular tinplate cans for liquid pesticides Mar 2011 1
(first revision)
44 IS 10325:2000 Square tins-15 kg for ghee,vanaspati, edible oils and Mar 2011
bakery shortenings (second revision)
45 IS 10339:2000 Ghee, vanaspati ane edible oil tins (second revision) Mar 2011
46 IS 11078:1993 Open top sanitary cans for milk powder (first revision) Mar 2011
47 * IS 11079:1984 Metal cans for pan masala and zarda Nov 2008
48 IS 11104:2012 Glossary of terms relating to open top sanitary cans 1
49 IS 12219:1987 Methods of determination of gross-lidded capacity of Mar 2011
open top sanitary cans
50 IS 12340:1988 Round open top aluminium containers for liquid pesticidesMar 2011 1
51 * IS 13997:1994 Drums large open top Mar 2011 1
52 IS 14407:1996 Aluminium cans for bevereges Mar 2011
1 DOC.MTD 32(4943) Specification for Round open top sanitary cans for butter
and cheese (first revision)
2 DOC.MTD 32(4945) Round open top sanitary cans for milk powder
specification (second revision)
3 DOC.MTD 32(5079) Screwed dosures for drums – Specification (Third
revision of IS 1784)
4 DOC.MTD 32(5082) Drums, large, fixed ends Part 1 Grade A drums (third
revision of IS 1783 (Part 1):1993
5 DOC.MTD 32(5083) Drums, large, fixed ends Part 2 Grade B Drums (fourth
revision of IS 1783 (Part 2):2012
6 DOC.MTD 32(5097) Drums large open top – Specification (first revision of IS
13997)
1 DOC.MTD 32(4996) Round open top sanitary cans for processed foods
Part 1 Tinplate requriements (second revision of IS 9396)
2 DOC.MTD 32(5099) Specification for crown closures (third revison of IS
1994)
3 DOC.MTD 32(5100) Specification for metal cans for pan masala, and zarda
(first revision of IS 11079)1 DOC.MTD 33(5109) Nanotechnologies – Model taxonomic framework for use
in developing vocabularies – Core concepts (based on
ISO/TR 12885:2008)
2 DOC.MTD 33(5110) Nanotechnologies – Nanomaterial risk evaluation (based
on ISO/TR 13121:2011)
3 DOC.MTD 33(5111) Nanotechnologies – Vacabulary – Part 1: Core terms
(based on ISO/TS 80004-1:2010)
4 DOC.MTD 33(5112) Nanotechnologies – Vacabulary – Part 3: Carbon nanoobjets (based on ISO/TS 80004-3:2010)
5 DOC.MTD 33(5113) Nanotechnologies – Methodology for the classification
and categorization of nanomaterials (based on ISO/TR
11360:2010)
6 DOC.MTD 33(5114) Nanotechnologies – Health and safety practices in
occupational settings relevant to nanotechnologies
(based on ISO/TR 12802:2010)
1 DOC.MTD 33(5168) Nanotechnologies – Materials specifications – Guidance
on specifying nano-objects (based on ISO/TS
12805:2011)
2 DOC.MTD 33(5165) Nanotechnologies – Vocabulary – Part 4 – Nanostructured
materials (based on ISO/TS 80004-4:20110
3 DOC.MTD 33(5166) Nanotechnologies – Vocabulary – Part 5: Nano/bio
interface (based on ISO/TSC 80004-5:2011)
4 DOC.MTD 33(5167) Nanotechnologies – Vocabulary – Part 7: Diagonstics and
therapeutics for healthcare (based on ISO/TS 80004-
7:2011)
5 DOC.MTD 33(5169) Nanotechnologies – Determination of elemental impurites
in samples of carbon nanotubes using inductively
coupled plasma mass spectrometry (based on ISO/TS
13278:20110
6 DOC.MTD 33(5170) Nanotechnologies – Endotoxin test on nanomaterial
samples for in vitro systems – Limulus amebocyte lysate
(LAL) test (based on ISO 29701:2010)
7 DOC.MTD 33(5115) Nanotechnolgies – Nanomaterial risk evaluation (based on
ISO/TR 13121:2011)1 IS 228(Part 1):1987 Methods of chemical analysis of steels (part 1) Sep 2012 1
Determination of carbon by volumetric method (for
carbon 0.05 to 2.50 percent) (third revision)
2 IS 228(Part 2):1987 Part 2 Determination of Manganese in plain carbon and Sep 2012
low alloy steels by arsenite method (third revision)
3 IS 228(Part 3):1987 Part 3 Determination of phosphorus by alkalimetric Sep 2012
method (third revision)
4 IS 228(Part 4):1987 Part 4 Determination of total carbon by gravimetric Sep 2012
method (for carbon greaterthan or equal to 0.1 percent)
(third revision)
5 IS 228(Part 5):1987 Part 5 Determination of nickel by dimethyl glyoxime May 2009
(gravimetric) method (for nickel greater than or equal to
0.1 percent (third revision)
6 IS 228(Part 6):1987 Part 6 Determination of chromium by persulphate May 2009
oxidation method (for chromium greater than or equal to
0.1 percent) (third revision)
7 IS 228(Part 7):1990 Part 7 Determination of molybdenum by alpha- Sep 2012
benzoinoxime method (for molybdenum greater than 1
percent) (third revision)
8 IS 228(Part 8):1989 Part 8 Determination of silicon by gravimetric method (for Nov 2009
silicon 0.05 to 0.50percent) (third revision)
9 IS 228(Part 9):1989 Part 9 Determination of sulphur in plain carbon steels by Nov 2009
evolution method (forsulphur 0.01 to 0.25 percent) (third
revision)
10 IS 228(Part 10):1989 Part 10 Determination of molybdenum by thiocynate May 2009
(photometric) method in low and high alloy steels (for
molybdenum 0.01 to 1.5 percent) (third revision)
11 IS 228(Part 11):1990 Part 11 Determination of total silicon by reduced May 2009
molybdosilicate spectro photometric method in carbon
steels and low alloy steels (for silicon 0.01 to 0.05
percent) (third revision)
12 IS 228(Part 12):2001 Part 12 Determination of manganese by periodate May 2009
spectrophotometric method in low and high alloy steels
(for manganese 0.01 to 2.0 percent) (fourth revision)
13 IS 228(Part 13):1982 Part 13 Determination of arsenic May 2009
14 IS 228(Part 14):1988 Part 14 Determination of carbon by thermal conductivity Nov 2009
method (for ca rbon 0.005 to 2.000 percent)
15 IS 228(Part 15):1992 Part 15 Determination of copper by thiosulphate iodide May 2009
method (for copper 0.05to 5 percent)
16 IS 228(Part 16):1992 Part 16 Determination of tungsten by spectrophotometric May 2009
method (for tungsten 0.1 to 2 percent)
17 IS 228(Part 17):1998 Part 17 Determination of nitrogen by thermal conductivity Sep 2010
method (for nitrogen upto 0.4 percent)
18 IS 228(Part 18):1998 Part 18 Determination of oxygen by instrumental method Sep 2012
19 IS 228(Part 19):1998 Part 19 Determination of nitrogen by steam distillation Sep 2010
20 IS 228(Part 20):2003 Methods of chemical analysis of steels Part 20 Dec 2008
Determination of carbon and sulphur by infra-red
absorption method
21 IS 228(Part 21):2003 Methods of chemical analysis of steel Part 21 Dec 2008
Determination of copper by spectrometric method (for
copper 0.02 to 0.5 percent) (Revision of IS 228)
22 IS 228(Part 22):2003 Methods of chemical analysis of steels Part 22 Dec 2008
Determination of total hydrogen in steel by thermal
conductivity method
23 IS 228(Part 23):2003 Methods of chemical analysis of steel Part 23 Dec 2008
Determination of nitrogen in steel by optical emission
spectrometer
24 IS 228(Part 24):2003 Methods of chemical analysis of steel Part 24 Dec 2008
Determination of nitrogen steel blby inert gas fusionthermal conductivity method
25 IS 403:1964 Methods of chemical analysis of lead and antimonial lead Jul 2010
(revised)
26 IS 406:1964 Methods of chemical analysis of slab zinc (spelter) Jul 2010
(revised)
27 IS 440:1964 Methods of chemical analysis of copper (revised) Feb 2012
28 IS 504:1963 Methods of chemical analysis of aluminium and its alloys Mar 2010
(revised)
29 IS 504(Part 1):2002 Methods of Chemical analysis of aluminium and its alloys Sep 2012
Part 1 Determination of silicon (first revision)
30 IS 504(Part 2):2000 Part 2 Determination of iron (first revision) Sep 2012
31 IS 504(Part 3):2003 Part 3 Determination of copper (first revision) Sep 2012
32 IS 504(Part 4):2002 Part 4 Determination of zinc (first revision) Sep 2012
33 IS 504(Part 5):2002 Part 5 Determination of manganese (first revision) Sep 2012
34 IS 504(Part 6):2002 Part 6 Determination of magnesium (first revision) Sep 2012
35 IS 504(Part 7):2002 Methods of chemical analysis of aluminium and its alloys Sep 2012
Part 7 Determination of nickel (first revision)
36 IS 504(Part 8):2002 Part 8 Determination of chromium (first revision) Sep 2012
37 IS 504(Part 9):2002 Part 9 Determination of tin (first revision) Sep 2012
38 IS 504(Part 10):2002 Part 10 Determination of antimony (first revision) Sep 2012
39 IS 504(Part 11):2002 Part 11 Determination of titanium (first revision) Sep 2012
40 IS 504(Part 12):2002 Part 12 Determination of vanadium (first revision) Sep 2012
41 IS 504(Part 13):2003 Part 13 Determination of Sodium Sep 2012
42 IS 504(Part 14):2003 Part 14 Determination of Berrileum Sep 2012
43 IS 504(Part 15):2003 Part 15 Determination of Zirconium Sep 2012
44 IS 504(Part 16):2003 Part 16 Determination of Lithium Sep 2012
45 IS 998(Part 1):1983 Methods of chemical analysis of solders (soft and rosin May 2008
cored) Part 1 Determination of tin and antimony (first
revision)
46 IS 998(Part 2):1983 Part 2 Determination of iron,copper and arsenic (first May 2008
revision)
47 IS 998(Part 3):1983 Part 3 Determination of cadmium, zinc, aluminium, bismuthMay 2008
and nickel (first revision)
48 IS 999:1959 Method of chemical analysis of brazing solder May 2008
49 IS 1047:1965 Methods of chemical analysis of antimony (revised) Jul 2010
50 IS 1335:1979 Methods for direct determination of alumina in refractory Oct 2011
materials (first revision)
51 IS 1409:1959 Methods of chemical analysis of antifriction bearing alloys Jul 2010
52 IS 1473:2004 Methods of chemical analysis of manganese ores(first Oct 2011
revision)53 * IS 1493:1959 Methods of chemical analysis of iron ores Oct 2011
54 IS 1493(Part 1):1981 Methods of chemical analysis of iron ores Part 1 Oct 2011
Determination of common constituents
55 IS 1493(Part 3):1987 Part 3 Determination of titanium, chromium, vanadium, Oct 2011
calcium and magnesium by atomic absorption
spectrophotometry
56 IS 1493(Part 4):1988 Part 4 Determination of aluminium by atomic absorption Oct 2011
spectrophotomety
57 IS 1493(Part 5):1990 Part 5 Determination of copper content atomic absorption Oct 2011
/ ISO 4693:1986 spectrometric method
58 IS 1493(Part 6):1990 Part 6 Determination of sodium and/or potassium Oct 2011
/ ISO 6831:1986 contents-Flame atomic abssorption spectrometric method
59 IS 1493(Part 7):1993 Part 7 Determination of lead and or zinc content – Flame Oct 2011
/ ISO 8753:1987 atomic absorption spectrometric method (first revision)
60 IS 1493(Part 8):1993 Part 8 Determination of arsenic content – Molybdenum Oct 2011
/ ISO 7834:1987 blue spectrophotometric method (first revision)
61 IS 1527:1972 Methods for chemical analysis of high silica refractory Oct 2011
materials (first revision)
62 * IS 1559:1961 Methods of chemical analysis of ferro alloys Sep 2012
63 IS 1559(Part 1):1988 Methods of chemical analysis of ferro silicon Part 1 Mar 2009
Determination of silicon (second revision)
64 IS 1559(Part 2):1982 Part 2 Determination of carbon (first revision) Sep 2012
65 IS 1559(Part 3):1982 Part 3 Determination of sulphur (first revision) Sep 2012
66 IS 1559(Part 4):1982 part 4 Determination of phosphorus (first revision) Sep 2012
67 IS 1559(Part 5):2003 Chemical anlaysis of ferrosilicon, Part 5 Determination of Mar 2009
aluminium in ferrosilicon (Aluminium 0.05 to 1.75%)
(second revision of IS 1559)
68 IS 1559(Part 6):1982 Part 6 Determination of calcium (first revision) Sep 2012
69 IS 1559(Part 7):1982 Part 7 Determination of manganese (first revision) Sep 2012
70 IS 1760(Part 1):1991 Methods of chemical analysis of limestone, dolomite and Oct 2011
allied materials Part 1 Determination of loss on ignition
(first revision)
71 IS 1760(Part 2):1991 Part 2 Determination of silica (first revision) Oct 2011
72 IS 1760(Part 3):1992 Part 3 Determination of iron oxide, alumina, calcium oxide Oct 2011
and magnesia (first revision)73 IS 1760(Part 4):1991 Part 4 Determination of carbon dioxide (first revision)Oct 2011
74 IS 1760(Part 5):1991 Part 5 Determination of chlorides (first revision) Oct 2011
75 * IS 1760(Part 6):2001 Part 6 Determination of free silica (first revision) Oct 2011
76 IS 1917(Part 1):1991 Chemical analysis of quartzite and high silica sand Part 1Oct 2011
Determination of loss on ignition (first revision)
77 IS 1917(Part 2):1991 Part 2 Determination of sodium and potassium by flame Oct 2011
photometry (first revision)
78 IS 1917(Part 3):1992 Part 3 Determination of silica (first revision) Oct 2011
79 IS 1917(Part 4):1991 Part 4 Determination of aluminium by AAS method (first Oct 2011
revision)
80 IS 1917(Part 5):1992 Part 5 determination of iron by AAS method (first Oct 2011
revision)
81 IS 1917(Part 6):1992 Part 6 Determination of calcium and magnesium by atomicOct 2011
absorption spectrometric method (first revision)
82 * IS 1917(Part 7):2001 Part 7 Determination of titania (first revision) Oct 2011
83 IS 1940:1969 Methods of chemical analysis of tin ingot (first revision) Jul 2010
84 IS 1952:1963 Methods of chemical analysis of nickel anodes Jul 2010 1
85 IS 2000(Part 1):1985 Methods of chemical analysis of bauxite Part 1 Oct 2011
Determination of loss on ignition(first revision)
86 IS 2000(Part 2):1985 Part 2 Determination of silica (first revision)vision) Oct 2011
87 IS 2000(Part 3):1985 Part 3 Determination of alumina (first revision) Oct 2011
88 IS 2000(Part 4):1985 Part 4 Determination of ferric oxide (first revision) Oct 2011
89 IS 2000(Part 5):1985 Part 5 Determination of titania (first revision) Oct 2011
90 IS 2000(Part 6):1985 Part 6 Determination of vanadium (first revision) Oct 2011
91 IS 2000(Part 7):2001 Part 7 Determination of phosphorus pentroxide (first Oct 2011
revision)
92 IS 2000(Part 8):1989 Part 8 Determination of manganese by atomic absorption Oct 2011
spectrophotometric method (first revision)
93 IS 2000(Part 9):1989 Part 9 Determination of magnesiuum and calcium by Oct 2011
atomic absorption spectrophotometric method (first
revision)
94 IS 2017:1967 Methods of Chemical analysis of metallic manganese Sep
2012
95 * IS 2018:1998 Methods of chemical analysis of calcium silicon (second Sep 2012
revision)
96 IS 2020(Part 1):1968 Methods of chemical analysis of silico chromium Part 1 Sep 2012
analysis of silicon and chromium
97 IS 2277:1964 Methods of chemical analysis of metallic silicon Sep 2012
98 IS 2390:1967 Methods for chemical analysis of foundry nickel Jul 2010
99 IS 2411:1963 Methods of chemical analysis of fluorspar (fluorite) Oct 2011
100 IS 2599:1983 Methods for spectrographic analysis of high purity zinc Jul 2010
and zinc base alloys for die casting (first revision)
101 IS 2600(Part 1):1988 Methods of chemical analysis of zinc and zinc base May 2008
alloys for die castings Part 1 Determination of copper,
iron, nickel, tin and thallium by spectrophotometric method
(first revision)
102 IS 2600(Part 2):1988 Part 2 Determination of copper,iron, lead and cadmium May 2008
by atomic absorption spectrophotometric method (first
revision)
103 IS 2600(Part 3):1993 Part 3 Determination of Indium by atomic absorption May 2008
spectrometry method (first revision)
104 IS 2600(Part 4):1993 Part 4 – Determination of chromium by spectrophotometricMay 2008
method
105 IS 2766(Part 1):1968 Methods of chemical analysis of primary nickel Jul 2010
106 IS 3186:1965 Methods of chemical analysis of cadmium copper Feb 2012
107 IS 3187:1965 Methods of chemical analysis of copper-nickel zinc alloys Feb 2012
108 IS 3200:2001 Methods of chemical analysis of cryolite (first revision) Sep 2012 1
109 IS 3295(Part 1):1969 Method of chemical analysis of ferroboron Part 1 Mar 2009
Analysis of carbon, silicon and aluminium
110 IS 3295(Part 2):1970 Part 2 Determination of boron Mar 2009 1
111 IS 3685:1966 Methods of chemical analysis of brasses Sep 2012
112 IS 3863:1966 Methods of chemical analysis of copper-tellurium alloys Feb 2012
113 IS 4027(Part 1):1987 Methods of chemical analysis of bronzes Part 1 Feb 2012
Determination of copper and leadby electrolytic method
(first revision)114 IS 4027(Part 2):1987 Part 2 Determination of manganese-photometric method Feb 2012
(first revision)
115 IS 4027(Part 3):1987 Part 3 Determination of phosphorus by volumetric Feb 2012
method (first revision)
116 IS 4027(Part 4):1987 Part 4 Determination of nickel-dimethylglyoxime Feb 2012
photometric method (first revision)
117 IS 4027(Part 5):1987 Part 5 Determination of tin-iodimetric method (first Feb 2012
revision)ethod (first revision)
118 IS 4027(Part 6):1987 Part 6 Determination of zinc by complexometric (EDTA) Feb 2012
method (first revision)
119 IS 4027(Part 7):1990 Part 7 Determination of antimony by Rhodamine B Sep 2012
spectrophotometric method (firsr revision)
120 IS 4027(Part 8):1991 Part 8 Determination of iron (first revision) Sep 2012
121 IS 4027(Part 9):1991 Part 9 Determination of aluminium by AAS method (first Sep 2012
revision)
122 IS 4027(Part 10):2000 Part 10 Determination of silicon Feb 2012
123 IS 4027(Part 11):2000 Part 11 Determination of Lead- Ethylenediamine Feb 2012
Tetraacetic acid (EDTA) – Titrimetric method
124 IS 4104:1967 Method of chemical analysis of rutile Oct 2011
125 IS 4129:1967 Methods of chemical analysis of aluminium trifluoride Oct 2011 1
126 IS 4354(Part 1):1967 Methods of chemical analysis of magnesium, aluminium Jul 2010
brazing alloys, Part 1 Analysis of aluminium, manganese,
zinc and silicon
127 IS 4548(Part 1):1967 Methods of chemical analysis of copper gold brazing Feb 2012
alloys Part 1 Analysis of gold and copper
128 IS 4646(Part 1):1968 Methods of chemical analysis of copper phosphorus Sep 2012
brazing alloys, Part 1 Analysis for silver and copper
129 IS 4646(Part 2):1976 Part 2 Determination of phosphorusnation of phosphorus Sep 2012
130 IS 4667(Part 1):1968 Methods of chemical analysis of silver copper brazing Sep 2012
alloys Part 1 Analysis for silver and copper
131 IS 4667(Part 2):1969 Part 2 Determination of silver, copper and tin Sep 2012
132 IS 4667(Part 3):2001 Part 3 Determination of nickel, cadmium and zinc Feb 2012
133 IS 4667(Part 4):2001 Part 4 Determination of copper, cadmium and zinc by Feb 2012 1
electrolytic method
134 IS 5425(Part 1):1969 Methods of chemical analysis of misch metal Part 1 Sep 2012
Determination of cerium135 IS 5425(Part 2):1984 Part 2 Determination of total rare earths Sep 2012
136 IS 5425(Part 3):1987 Part 3 Determination of iron Mar 2010
137 IS 5425(Part 4):1987 Part 4 Determination of aluminium Mar 2010
138 IS 5425(Part 5):1987 Part 5 Determination of carbon Mar 2010
139 IS 6226(Part 1):1994 Recommendations for apparatus for chemicals analysis Sep 2012
of metals,Part 1 Apparatusfor determination of carbon by
direct combustion (first revision)
140 IS 6226(Part 2):1987 Part 2 Determination on of sulphur by direct combustion Feb 2008
141 IS 6516:1972 Methods for chemical analysis of tin and lead in Jul 2010
secondary tin
142 IS 6744(Part 1):1972 Methods of chemical analysis of ilemenite Oct 2011
143 IS 7658:1975 Spectrographic analysis of aluminium Mar 2010
144 IS 7659(Part 1):1975 Reagents and standard solutions for use in chemical Nov 2010
analysis of metals, ores and minerals Part 1 volumetric
solution
145 IS 8097:1976 Methods of chemical analysis of soft solders for jointing Jul 2010
aluminium and aluminium alloys
146 IS 8812(Part 1):1978 Methods for chemical analysis of hard solders for jointingMay 2008
aluminium and aluminium alloys, Part 1 Determination of
silver, copper, zinc, antimony ,arsenic, iron and bismuth
147 IS 8812(Part 2):1982 Part 2 Determination of aluminium May 2008
148 IS 8816:1978 Methods for selection and preparation of samples for Jul 2010
spectrographic analysis ofzinc and zinc alloy ingots
149 IS 9386:1979 Methods for chemical analysis of rock phosphate Nov 2010
150 * IS 10085:2003 Methods for chemical analysis of zircon flour or sand Nov 2008
(first revision)
151 IS 11035:1984 Methods for spectrographic analysis of wrought Mar 2010
aluminium alloys
152 IS 11690:1986 Methods of moisture determination of iron ore lot Nov 2008
153 IS 12107(Part 1):1987 Methods of chemical analysis of alumino-silicate Oct 2011
refractory materials Part 1 Determination of loss on ignition
154 IS 12107(Part 2):1987 Part 2 Determination of silica Oct 2011
155 IS 12107(Part 3):1987 Part 3 Determination of aluminium Oct 2011
156 IS 12107(Part 4):1987 Part 4 Determination of phosphorus Oct 2011
157 IS 12107(Part 5):1987 Part 5 Determination of titanium Oct 2011
158 IS 12107(Part 6):1987 Part 6 Determination of iron Oct 2011
159 IS 12107(Part 7):1987 Part 7 Determination of manganese Oct 2011
160 IS 12107(Part 8):1987 Part 8 Determination of calcium and magnesium Oct 2011
161 IS 12107(Part 9):1987 Part 9 Determination of sodium and potassium by flame Oct 2011
photometry
162 IS 12107(Part 10):2001 Part 10 Determination of iron, manganese, calcium and Oct 2011
magnesium by AAS method
163 IS 12308(Part 1):1987 Method for chemical analysis of cast iron and pig iron Sep 2012
Part 1 Determination of total carbon by thermal
conductivity method (for carbon1.00 to 4.50 percent)
164 IS 12308(Part 2):1987 Part 2 Determination of sulphur by iodimetric titration afterSep 2012
combustion (for sulphur 0.005 to 0.25 percent)
165 IS 12308(Part 3):1987 Part 3 Determination of manganese by periodic Sep 2012
spectrophotometric method (for manganese 0.1 to 2.5
percent)
166 IS 12308(Part 4):1988 Part 4 Determination of total carbon, graphitic carbon andNov 2009
combined carbon by gravimetric method
167 IS 12308(Part 5):1991 Part 5 Determination of phosphorus by alkalimetric Jan 2012 2
method (for phosphorus 0.01 to 0.50 percent)
168 IS 12308(Part 6):1991 Part 6 Determination of silicon by gravimetric method (forJan 2012 1
silicon 0.1 to 6.0 percent)
169 IS 12308(Part 7):1991 Part 7 Determination of nickel by dimethyl glyoxime Jan 2012
(gravimetric) method(for nickel 0.5 to 36 percent)
170 IS 12308(Part 8):1997 Part 8 Determination of chromium by per sulphate Sep 2012
oxidation method (for chromium0.1 to 28 percent)
171 IS 12308(Part 9):1993 Part 9 Determination of molybdenum by thiocynate Nov 2009
(spectrometric) method (for molybdenum 0.01 to 1.0
percent)
172 IS 12308(Part 10):1991 Part 10 determination of managanese (upto 7.0 percent) Jan 2012 3
by arsenite(volumetric )method
173 IS 12308(Part 11):1991 Part 11 Determination of total carbon by the direct Jan 2012 4
combustion volumetric method (for carbon 1.50 to 4.50
percent)
174 IS 12308(Part 12):1992 Part 12 Determination of copper by atomic absorption Sep 2012
spectrometric method (for copper 0.01 to 0.5 percent
75 IS 12308(Part 13):1992 Part 13 Determination of magnesium by atomic absorptin Sep 2012
spectrometric method (for magnesium upto 0.1 percent)
176 IS 12308(Part 14):1993 Part 14 Determination of titanium by hydrogen per oxide Nov 2009
(spectrophotometric) method (for titanium upto 0.25
percent)
177 IS 12614(Part 1):1988 Method of chemical analysis of ferro molybdenum Mar 2009
Part 1 Determination of molybdenum
178 IS 12614(Part 2):1988 Part 2 Determination of total carbon Mar 2009
179 IS 12614(Part 3):1988 Part 3 Determination of siliconON Mar 2009
180 IS 12614(Part 4):1988 Part 4 Determination of sulphur Mar 2009
181 IS 12614(Part 5):1988 Part 5 Determination of phosphorus Mar 2009
182 IS 12614(Part 6):1988 Part 6 Determination of copper Mar 2009
183 IS 12614(Part 7):1988 Part 7 Determination of aluminium Mar 2009
184 IS 12667(Part 1):1989 Methods of chemical analysis of chromite sand Part 1 Oct 2011
Determination of silica
185 IS 12667(Part 2):1989 Part 2 Determination of iron Oct 2011
186 IS 12667(Part 3):1989 Part 3 Determination of chromium Oct 2011
187 IS 12667(Part 4):1989 Part 4 Determination of calcium oxide Oct 2011
188 * IS 13452(Part 1):1992 Methods of chemical analysis of ferrochromium Sep 2012
Part 1 Determination of silicon in high carbon
ferrochromium by gravimetiric method
189 * IS 13452(Part 2):1992 Part 2 Determination of silicon in low carbon Sep 2012
ferrochromium by gravimetric method
190 * IS 13452(Part 3):1992 Part 3 Determination of phosphorus in low carbon Sep 2012
ferrochromium by spectrometricmethod
191 * IS 13452(Part 4):1992 Part 4 Determination of total sulphur in low carbon and Sep 2012
high carbon ferrochromium by direct combustion method
192 * IS 13452(Part 5):1992 Part 5 Determination of chromium in high carbon Sep 2012
ferrochromium chargechrome by dichromate titration
(first revision)
193 * IS 13452(Part 6):1997 Part 6 Determination of chromium in low carbon ferro Sep 2012
chromium
194 * IS 13452(Part 7):2003 Chemical analysis of ferrochromium Part 7 Determination Mar 2009
of phosphorus in ferrochromium/chargechrome by
alkalimetric method195 * IS 13840(Part 1):1993 Chemical analysis of ferro titanium Part 1 Determination Mar 2009
of carbon by direct combustion gravimetric method
196 * IS 13840(Part 2):1993 Part 2 Determination of silicon by gravimetric method Mar 2009
197 * IS 13840(Part 3):1993 Part 3 Determination of titanium by cupferron Mar 2009
(gravimetric) method
198 * IS 13840(Part 4):1998 Part 4 Determination of aluminium by phosphate method Mar 2009
199 * IS 13840(Part 5):1998 Part 5 Determinations of sulphur by direct combusion Mar 2009
method
200 * IS 13840(Part 6):1998 Part 6 Determination of titanium by x-ray fluorescence Mar 2009
technique
201 IS 13938(Part 1):1994 Chemical analysis of ferromanganese Part 1 Mar 2009
Determination of silicon by gravimetric method
202 IS 13938(Part 3):1993 Chemical analysis of ferromanganese Part 3 Mar 2009
Determination of phosphorous by volumetric (alkalimetric)
method
203 IS 13938(Part 4):1994 Chemical Analysis of Ferromangnese, Part-4 Mar 2009
Determination of Total Sulpher by direct Combustion
Method
204 IS 13963(Part 1):1994 Chemical analysis of cadmium metal – Part 1 May 2008
Determination of copper, zinc, leadand iron
205 IS 13963(Part 2):1994 Chemical analysis of cadmium metal Part 2 Determination May 2008
of nickel, arsenic, antimony and thallium by spectrometric
methods
206 IS 14529:2004 Chemical analysis of ferro silicon magnesium alloy (first Mar 2011
revision)
207 IS 14644(Part 1):1998 Nikel alloys – Flame atomic absorption spectrometric Jul 2010
/ ISO 7530-1-1:1990 analysis method – Part 1 General requirements and
sample dissolution
208 IS 14644(Part 2):1998 Part 2 Determination of cobalt content Jul 2010
/ ISO 7530-2:1990
209 IS 14644(Part 3):1998 Part 3 Determination of chromium content Jul 2010
/ ISO 7530-3:1990
210 IS 14644(Part 4):1998 Part 4 Determination of copper content Jul 2010
/ ISO 7530-4:1990
211 IS 14644(Part 5):1998 Part 5 Determination of iron content Jul 2010
/ ISO 7530-5:1990
212 IS 14644(Part 6):1998 Part 6 Determination of manganese content Jul 2010
/ ISO 7530-6:1990
213 IS 14644(Part 7):2000 Part 7 Determination of aluminium content Jul 2010
/ ISO 7530 -7:1992
214 IS 14644(Part 8):2000 Part 8 Determination of silicon content Jul 2010
/ ISO 7530-8:1992215 IS 14644(Part 9):2000 Part 9 Determination of vanadium content July 2010
/ ISO 7530-9:1993
216 IS 15396:2003 Chemical analysis of ferro silicon zirconium alloy Mar 2011
217 IS 15403:2003 Method for determination of sulphur present in sponge Mar 2011
iron after separation of non magnetic materials
1 DOC.MTD 34(5023) Chemical analysis of ferro chromium (first revision of IS
13452)
2 DOC.MTD 34(5024) Chemical analysis of ferrotitanium (revision of IS 13840)
3 DOC.MTD 34(4850) Method for chemical analysis of steels, Part 20
Determination of carbon and sulphur by infra-steel
absorption method (for carbon 0.005 to 2.1% and
sulphur 0.0005 to 0.35%) (third revision of IS 228(Part 20)
4 DOC.MTD 34(5182) Methods of chemical analysis of zinc and zinc base
alloys for die castings Part 5: Analysis by inductively
coupled plasma optical emission spectrometry (revision
of IS 2600 (Part 5)
5 DOC.MTD 34(5183) Methods of chemical analysis of zinc and zinc base
alloys for die castings Part 6: Determination of
magnesium by atomic absorption spectrometric method
(Revision of IS 2600 (Part 6)
6 DOC.MTD 34(5184) Methods of chemical analysis of zinc and zinc base
alloys for die castings Part 7: Determination of aluminium
by tirimetric method(Revision of IS 2600 (Part 7)

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com