Manufacture Stockholder Distributor of ISO Materials

We are Manufacture, Stockholder & Distributors of EN Standard Materials, EN Standard Products, EN Approved Materials, EN Approved Products, DIN Standard Materials, DIN Standard Products, DIN Approved Materials, DIN Approved Products, ISO Standard Materials, ISO Standard Products, ISO Approved Materials, ISO Approved Products Pipes, Tubes, Sheets, Plates, Strips, Coils, Wires, Wire-Rod, Rods, Bars, Round, Square, Hex, Hexagonal, Nuts, Bolts, Washers, Fasteners, Fittings, Electrodes, Filler Wire, TMT Bar, Cold Drawn, Hot Rolled, Hot Forged, Cold Forging, Forgings, Castings, CNC Machined, Components, Wire Rope, Strands, Annealed, Normalized, Hardened & Tempered

Standard No	Title of Standard
EN 13124-2:2004	Windows, doors and shutters. Explosion resistance. Test method. Range test
EN 13125:2001	Shutters and blinds. Additional thermal resistance. Allocation of a class of air permeability to a product
EN 13128:2001	Safety of machine tools. Milling machines (including boring machines)
EN 13129-1:2002	Railway applications. Air conditioning for main line rolling stock. Comfort parameters
EN 13129-2:2004	Railway applications. Air conditioning for main line rolling stock. Type tests
EN 13130-1:2004	Materials and articles in contact with foodstuffs. Plastics substances subject to limitation.
EN 13130-2:2004	Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of terephthalic acid in food simulants
EN 13130-3:2004	Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of acrylonitrile in food and food simulants
EN 13130-4:2004	Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-butadiene in plastics
EN 13130-5:2004	Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of vinylidene chloride in food simulants
EN 13130-6:2004	Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of vinylidene chloride in plastics
EN 13130-7:2004	Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of monoethylene glycol and diethylene glycol in food simulants
EN 13130-8:2004	Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of isocyanates in plastics
EN 1313-1:1997	Round and sawn timber. Permitted deviations and preferred sizes. Softwood sawn timber
EN 13131:2000	Methods of test for petroleum and its products. Liquid petroleum products. Determination of nickel and vanadium content. Atomic absorption spectrometric method
EN 1313-2:1999	Round and sawn timber. Permitted deviations and preferred sizes. Hardwood sawn timber
EN 13132:2000	Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol.
EN 13133:2000	Brazing. Brazer approval
EN 13134:2000	Brazing. Procedure approval
EN 13135-1:2003	Cranes. Safety. Design. Requirements for equipment. Electrotechnical equipment
EN 13135-2:2004	Cranes. Equipment. Non-electrotechnical equipment
EN 13136:2001	Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Methods for calculation
EN 13137:2001	Characterisation of waste. Determination of total organic carbon (TOC) in waste, sludges and sediments
EN 13138-1:2003	Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be worn
EN 13138-2:2002	Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be held
EN 13138-3:2003	Buoyant aids for swimming instruction. Safety requirements and test methods for swim seats to be worn
EN 13139:2002	Aggregates for mortar
EN 13140:2000	Agricultural machinery. Sugar beet and fodder beet harvesting equipment. Safety
EN 13141-1:2004	Ventilation for buildings. Performance testing of components/products for residential ventilation. Externally and internally mounted air transfer devices
EN 13141-2:2004	Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust and supply air terminal devices
EN 13141-3:2004	Ventilation for buildings. Performance testing of components/products for residential ventilation. Range hoods for residential use
EN 13141-4:2004	Ventilation for buildings. Performance testing of components/products for residential ventilation. Fans used in residential ventilation systems
EN 13141-6:2004	Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust ventilation system packages used in a single dwelling
EN 13142:2004	Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics
EN 13143:2003	Metallic and other inorganic coatings. Definitions and conventions concerning porosity
EN 13144:2003	Metallic and other inorganic coatings. Method for quantitative measurement of adhesion by tensile test
EN 13145:2001	Railway applications. Track. Wood sleepers and bearers
EN 13146-1:2002	Railway applications. Track. Test methods for fastening systems. Determination of longitudinal rail restraint
EN 13146-2:2002	Railway applications. Track. Test methods for fastening systems. Determination of torsional resistance
EN 13146-3:2002	Railway applications. Track. Test methods for fastening systems. Determination of attenuation of impact loads
EN 13146-4:2002	Railway applications. Track. Test methods for fastening systems. Effect of repeated loading
EN 13146-5:2002	Railway applications. Track. Test methods for fastening systems. Determination of electrical resistance
EN 13146-6:2002	Railway applications. Track. Test methods for fastening systems. Effect of severe environmental conditions
EN 13146-7:2002	Railway applications. Track. Test methods for fastening systems. Determination of clamping force
EN 13146-8:2002	Railway applications. Track. Test methods for fastening systems. In service testing
EN 13147:2001	Copper and copper alloys. Determination of residual stresses in the border area of a slit strip
EN 13148:2001	Copper and copper alloys. Hot-dip tinned strip
EN 13149-1:2004	Public transport. Road vehicle scheduling and control systems. WORLDFIP definition and application rules for onboard-data transmission
EN 13149-4:2004	Public transport. Road vehicle scheduling and control systems. General application rules for CANopen transmission buses
EN 13149-5:2004	Public transport. Road vehicle scheduling and control systems. CANopen cabling specifications
EN 13150:2001	Workbenches for laboratories. Dimensions, safety requirements and test methods
EN 1315-1:1997	Dimensional classification. Hardwood round timber
EN 1315-2:1997	Dimensional classification. Softwood round timber
EN 13152:2002	Specification and testing of LPG cylinder valves. Self closing
EN 13153:2002	Specification and testing of LPG cylinder valves. Manually operated
EN 13155:2003	Cranes. Safety. Non-fixed load lifting attachments
EN 13157:2004	Cranes. Safety. Hand powered lifting equipment
EN 13158:2000	Protective clothing. Protective jackets, body and shoulder protectors for horse riders. Requirements and test methods
EN 13160-1:2003	Leak detection systems. General principles
EN 13160-2:2003	Leak detection systems. Pressure and vacuum systems
EN 13160-3:2003	Leak detection systems. Liquid systems for tanks
EN 13160-4:2003	Leak detection systems. Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
EN 13160-5:2004	Leak detection systems. Tank gauge leak detection systems
EN 13160-6:2003	Leak detection systems. Sensors in monitoring wells
EN 13160-7:2003	Leak detection systems. General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
EN 1316-1:1997	Hardwood round timber. Qualitative classification. Oak and beech
EN 13161:2001	Natural stone test methods. Determination of flexural strength under constant moment
EN 1316-2:1997	Hardwood round timber. Qualitative classification. Poplar
EN 13162:2001	Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification
EN 1316-3:1998	Hardwood round timber. Qualitative classification. Ash and maples and sycamore
EN 13163:2001	Thermal insulation products for buildings. Factory made products of expanded polystyrene. Specification
EN 13164:2001	Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification
EN 13165:2001	Thermal insulation products for buildings. Factory made rigid polyurethane foam (PUR) products. Specification
EN 13166:2001	Thermal insulation products for buildings. Factory made products of phenolic foam (PF). Specification
EN 13167:2001	Thermnal insulation products for buildings. Factory made cellular glass (CG) products. Specification
EN 13168:2001	Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification
EN 13169:2001	Thermal insulation products for buildings. Factory made products of expanded perlite (EPB). Specification
EN 13170:2001	Thermal insulation products for buildings. Factory made products of expanded cork (ICB). Specification
EN 131700:1998	Harmonized system of quality assessment for electronic components. Sectional specification
EN 131701:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors
EN 131702:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current
EN 1317-1:1998	Road restraint systems. Terminology and general criteria for test methods
EN 13171:2001	Thermal insulation products for buildings. Factory made wood fibre (WF) products. Specification
EN 1317-2:1998	Road restraint systems. Performance classes, impact test acceptance criteria and test methods for safety barriers
EN 13172:2001	Thermal insulating products. Evaluation of conformity
EN 1317-3:2000	Road restraint systems. Performance classes, impact test acceptance criteria and test methods for crash cushions
EN 13173:2001	Cathodic protection for steel offshore floating structures
EN 13174:2001	Cathodic protection for harbour installations
EN 13175:2003	Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
EN 13176:2000	Chemicals used for treatment of water intended for human consumption. Ethanol
EN 13177:2002	Chemicals used for treatment of water intended for human consumption. Methanol
EN 13178:2000	Personal eye protection. Eye protectors for snowmobile users
EN 13179-1:2000	Test for filler aggregate used in bituminous mixtures. Delta ring and ball test
EN 13179-2:2000	Test for filler aggregate used in bituminous mixtures. Bitumen number
EN 1318:1997	Textile floor coverings. Determination of the apparent effective thickness of the backing
EN 13180:2002	Ventilation for buildings. Ductwork. Dimensions and mechanical requirements for flexible ducts
EN 131800:1998	Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
EN 131801:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E
EN 131802:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level EZ
EN 13181:2001	Ventilation for buildings. Terminals. Performance testing of louvres. Performance testing of louvres subject to simulated sand
EN 13182:2002	Ventilation for buildings. Instrumentation requirements for air velocity measurements in ventilated spaces
EN 13183-1:2002	Moisture content of a piece of sawn timber. Determination by oven dry method
EN 13183-2:2002	Moisture content of a piece of sawn timber. Estimation by electrical resistance method
EN 13183-3:2005	Moisture content of a piece of sawn timber. Estimation by capacitance method
EN 13184:2001	Non-destructive testing. Leak testing. Pressure change method
EN 13185:2001	Non-destructive testing. Leak testing. Tracer gas method
EN 13186:2004	Feather and down. Specification feather and down filled bedding articles
EN 13187:1999	Thermal performance of buildings. Qualitative detection of thermal irregularities in building envelopes. Infrared method
EN 13188:2000	Vinegar. Product made from liquids of agricultural origin. Definitions, requirements, marking
EN 13189:2000	Acetic acid food grade. Product made from materials of non-agricultural origin. Definitions, requirements, marking
EN 1319:1999	Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 13190:2001	Dial thermometers
EN 13191-1:2000	Non-fatty food. Determination of bromide residues. Determination of total bromide as inorganic bromide
EN 13191-2:2000	Non-fatty food. Determination of bromide residues. Determination of inorganic bromide
EN 13192:2002	Non-destructive testing. Leak testing. Calibration of reference leaks for gases

EN 10149-2:1996	Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels
EN 10149-3:1996	Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steels
EN 1015-1:1999	Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis)
EN 10151:2002	Stainless steel strip for springs. Technical delivery conditions
EN 1015-10:1999	Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar
EN 1015-11:1999	Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar
EN 1015-12:2000	Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrates
EN 1015-17:2000	Methods of test for mortar for masonry. Determination of water-soluble chloride content of fresh mortars
EN 1015-18:2002	Methods of test for mortar for masonry. Determination of water absorption coefficient due to capillary action of hardened mortar
EN 1015-19:1999	Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars
EN 1015-2:1999	Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars
EN 10152:2003	Electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions
EN 1015-21:2002	Methods of test for mortar for masonry. Determination of the compatibility of one-coat rendering mortars with substrates
EN 1015-3:1999	Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table)
EN 1015-4:1999	Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by plunger penetration)
EN 1015-6:1999	Methods of test for mortar for masonry. Determination of bulk density of fresh mortar
EN 1015-7:1999	Methods of test for mortar for masonry. Determination of air content of fresh mortar
EN 1015-9:1999	Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar
EN 10160:1999	Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10162:2003	Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
EN 10163-1:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. General requirements
EN 10163-2:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Plate and wide flats
EN 10163-3:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Sections
EN 10164:2004	Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
EN 10165:1996	Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
EN 10168:2004	Steel products. Inspection documents. List of information and description
EN 10169-1:2003	Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods)
EN 10169-3:2003	Continuously organic coated (coil coated) steel flat products. Products for building interior applications
EN 1017:1998	Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite
EN 1018:1998	Chemicals used for treatment of water intended for human consumption. Calcium carbonate
EN 10184:1992	Specification for chemical analysis of ferrous materials. Determination of phosphorus in steels and irons. Spectrophotometric method
EN 1019:1996	Chemicals used for treatment of water intended for human consumption. Sulfur dioxide
EN 1020:1998	Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion
EN 10200:1992	Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method
EN 10202:2001	Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
EN 10204:2004	Metallic materials. Types of inspection documents
EN 10205:1992	Specification for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel
EN 10207:2005	Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
EN 10208-1:1998	Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
EN 10208-2:1997	Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
EN 10209:1996	Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions
EN 10210-1:1994	Hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
EN 10210-2:1997	Hot finished structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties
EN 1021-1:1994	Furniture. Assessment of the ignitability of upholstered furniture. Ignition source: smouldering cigarette
EN 10211:1996	Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method
EN 1021-2:1994	Furniture. Assessment of the ignitability of upholstered furniture. Ignition source: match flame equivalent
EN 10212:1996	Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method
EN 10213-1:1996	Technical delivery conditions for steel castings for pressure purposes. General
EN 10213-2:1996	Technical delivery conditions for steel castings for pressure purposes. Steel grades for use at room temperature and at elevated temperature
EN 10213-3:1996	Technical delivery conditions for steel castings for pressure purposes. Steels for use at low temperatures
EN 10213-4:1996	Technical delivery conditions for steel castings for pressure purposes. Austenitic and austenitic-ferritic steel grades
EN 10216-1:2002	Seamless steel tubes for pressure purposes. Technical delivery conditions
EN 10216-2:2002	Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3:2002	Seamless steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
EN 10216-4:2002	Seamless steel tubes for pressure purposes. Technical delivery conditions
EN 10216-5:2004	Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10217-1:2002	Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
EN 10217-2:2002	Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-3:2002	Welded steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
EN 10217-4:2002	Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy steel tubes with specified low temperature properties
EN 10217-5:2002	Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-6:2002	Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10217-7:2005	Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10218-1:1994	Steel wire and wire products. General. Test methods
EN 10218-2:1997	Steel wire and wire products. General. Wire dimensions and tolerances
EN 10219-1:1997	Cold formed welded structural sections of non-alloy and fine grain steels. Technical delivery requirements
EN 10219-2:1997	Cold formed welded structural sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
EN 1022:1997	Domestic furniture. Seating. Determination of stability
EN 10220:2002	Seamless and welded steel tubes. Dimensions and masses per unit length
EN 10221:1996	Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions
EN 10222-1:1998	Steel forgings for pressure purposes. General requirements for open die forgings
EN 10222-2:2000	Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
EN 10222-3:1999	Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
EN 10222-4:1999	Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
EN 10222-5:2000	Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10223-1:1998	Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire
EN 10223-2:1998	Steel wire and wire products for fences. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
EN 10223-3:1998	Steel wire and wire products for fences. Hexagonal steel wire netting for engineering purposes
EN 10223-4:1998	Steel wire and wire products for fences. Steel wire welded mesh fencing
EN 10223-5:1998	Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing
EN 10223-6:1998	Steel wire and wire products for fences. Steel wire chain link fencing
EN 10223-7:2002	Steel wire and wire products for fences. Steel wire welded panels. For fencing
EN 10224:2002	Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions
EN 10225:2001	Weldable structural steels for fixed offshore structures. Technical delivery conditions
EN 10226-1:2004	Pipe threads where pressure tight joins are made on the threads. Taper external threads and parallel internal threads. Dimensions, tolerances and designation
EN 10228-1:1999	Non-destructive testing of steel forgings. Magnetic particle inspection
EN 10228-2:1998	Non-destructive testing of steel forgings. Penetrant testing
EN 10228-3:1998	Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4:1999	Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 10229:1998	Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
EN 10230-1:2000	Steel wire nails. Loose nails for general applications
EN 1023-1:1997	Office furniture. Screens. Dimensions
EN 1023-2:2000	Office furniture. Screens. Mechanical safety requirements
EN 1023-3:2000	Office furniture. Screens. Test methods
EN 10238:1997	Automatically blast cleaned and automatically primed structural steel products
EN 1024:1997	Clay roofing tiles for discontinuous laying. Determination of geometric characteristics
EN 10240:1998	Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants
EN 10241:2000	Steel threaded pipe fittings
EN 10242:1995	Threaded pipe fittings in malleable cast iron
EN 10243-1:1999	Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
EN 10243-2:1999	Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
EN 10244-1:2001	Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
EN 10244-2:2001	Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
EN 10244-3:2001	Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Aluminium coatings
EN 10244-4:2001	Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Tin coatings
EN 10244-5:2001	Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
EN 10244-6:2001	Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass coatings
EN 10245-1:2001	Steel wire and wire products. Organic coatings on steel wire. General rules
EN 10245-2:2001	Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
EN 10245-3:2001	Steel wire and wire products. Organic coatings on steel wire. PE coated wire
EN 10245-4:2003	Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
EN 10246-1:1996	Non-destructive testing of steel tubes. Automatic electromagnetic testing of seamless and welded
EN 10246-10:2000	Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
EN 10246-11:2000	Non-destructive testing of steel tubes. Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
EN 10246-12:2000	Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

EN 13193:2000	Packaging. Packaging and the environment. Terminology
EN 13194:2000	Chemicals used for treatment of water intended for human consumption. Acetic acid
EN 13195-1:2002	Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore). Specifications
EN 13196:2000	Fruit and vegetable juices. Determination of total sulfur dioxide by distillation
EN 13197:2001	Road marking materials. Wear simulators
EN 13198:2003	Precast concrete products. Street furniture and garden products
EN 13199-1:2000	Packaging. Small load carrier systems. Common requirements and test methods
EN 13199-2:2000	Packaging. Small load carrier systems. Column Stackable System (CSS)
EN 13199-3:2000	Packaging. Small load carrier systems. Bond Stackable System (BSS)
EN 132:1999	Respiratory protective devices. Definitions of terms and pictograms
EN 1320:1997	Destructive tests on welds in metallic materials. Fracture tests
EN 13200-1:2003	Spectator facilities. Layout criteria for spectator viewing area. Specification
EN 13201-2:2003	Road lighting. Performance requirements
EN 13201-3:2003	Road lighting. Calculation of performance
EN 13201-4:2003	Road lighting. Methods of measuring lighting performance
EN 13202:2000	Ergonomics of the thermal environment. Temperatures of touchable hot surfaces. Guidance for establishing surface temperature limit values in product standards with the aid of EN 563
EN 13204:2004	Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements
EN 13205:2002	Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations
EN 13206:2001	Covering thermoplastic films for use in agriculture and horticulture
EN 13207:2001	Silage thermoplastic films
EN 13208:2003	Food processing machinery. Vegetable peelers. Safety and hygiene requirements
EN 13209-1:2004	Child use and care articles. Baby carriers. Safety requirements and test methods. Framed back carriers
EN 1321:1997	Destructive test on welds in metallic materials. Macroscopic and microscopic examination of welds
EN 13210:2004	Child care articles. Children’s safety harnesses, reins and similar type articles. Safety requirements and test methods
EN 132100:1997	Harmonized system of quality assessment for electronic components. Sectional specification: fixed mulitlayer ceramic surface mounting capacitors. Assessment levels EZ and DZ
EN 132101:1997	Blank detail specification. Fixed multilayer ceramic surface mounting capacitors. Assessment level EZ
EN 132102:1997	Blank detail specification. Fixed multilayer ceramic surface mounting capacitors. Assessment level DZ
EN 13211:2001	Air quality. Stationary source emissions. Manual method of determination of the concentration of total mercury
EN 13212:2001	Road marking materials. Requirements for factory production control
EN 13213:2001	Hollow floors
EN 13214:2001	Thermal spraying. Thermal spray coordination. Tasks and responsibilities
EN 13215:2000	Condensing units for refrigeration. Rating conditions, tolerances and presentation of manufacturer’s performance data
EN 13216-1:2004	Chimneys. Test methods for system chimneys. General test methods
EN 13218:2002	Machine tools. Safety. Stationary grinding machines
EN 13219:2001	Gymnastic equipment. Trampolines. Functional and safety requirements, test methods
EN 13220:1999	Flow-metering devices for connection to terminal units of medical gas pipeline systems
EN 13221:2000	High-pressure flexible connections for use with medical gases
EN 13223:2004	Safety requirements for cableways installations designed to carry persons. Drive systems and other mechanical equipment
EN 13224:2004	Precast concrete products. Ribbed floor elements
EN 13225:2004	Precast concrete products. Linear structural elements
EN 13226:2002	Wood flooring. Solid parquet elements with grooves and/or tongues
EN 13227:2002	Wood flooring. Solid lamparquet products
EN 13228:2002	Wood flooring. Solid wood overlay flooring elements including blocks with an interlocking system
EN 13229:2001	Inset appliances including open fires fired by solid fuels. Requirements and test methods
EN 1323:1999	Adhesives for tiles. Concrete slab for test
EN 13230-1:2002	Railway applications. Track. Concrete sleepers and bearers. General requirements
EN 13230-2:2002	Railway applications. Track. Concrete sleepers and bearers. Prestressed monoblock sleepers
EN 13230-3:2002	Railway applications. Track. Concrete sleepers and bearers. Twin-block reinforced sleepers
EN 13230-4:2002	Railway applications. Track. Concrete sleepers and bearers. Prestressed bearers for switches and crossings
EN 13230-5:2002	Railway applications. Track. Concrete sleepers and bearers. Special elements
EN 13232-1:2003	Railway applications. Track. Switches and crossings. Definitions
EN 13232-2:2003	Railway applications. Track. Switches and crossings. Requirements for geometric design
EN 13232-3:2003	Railway applications. Track. Switches and crossings. Requirements for wheel/rail interaction
EN 13236:2001	Safety requirements for superabrasives
EN 13237:2003	Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 13238:2001	Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
EN 1324:1999	Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives
EN 13240:2001	Roomheaters fired by solid fuel. Requirements and test methods
EN 132400:1995	Harmonized system of quality assessment for electronic components. Sectional specification.
EN 132401:1995	Specification for harmonized system of quality assessment for electronic components.
EN 13241-1:2003	Industrial, commercial and garage doors and gates. Product standard. Products without fire resistance or smoke control characteristics
EN 13242:2002	Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 132421:1997	Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for electromagnetic interference suppression.
EN 13243:2004	Safety requirements for cableways installation designed to carry persons. Electrical equipment other than for drive systems
EN 13244-1:2002	Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE). General
EN 13244-2:2002	Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE). Pipes
EN 13244-3:2002	Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE). Fittings
EN 13244-4:2002	Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE). Valves
EN 13244-5:2002	Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE). Fitness for purpose of the system
EN 13245-1:2004	Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Designation of light coloured profiles
EN 13246:2001	Packaging. Specification for tensional steel strapping
EN 13247:2001	Packaging. Specification for tensional strapping for lifting, lashing and securing of loads
EN 13248:2002	Cookware. Coffee makers for domestic use with an independent heat source. Definitions, requirements and test methods
EN 13249:2001	Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
EN 13250:2001	Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways
EN 1325-1:1997	Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis
EN 13251:2001	Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures
EN 13252:2001	Geotextiles and geotextile-related products. Characteristics required for use in drainage systems
EN 1325-2:2004	Value management, value analysis, functional analysis vocabulary. Value management
EN 13253:2001	Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments)
EN 13254:2001	Geotextiles and geotextile-related products. Characteristics required for use in the construction of reservoirs and dams
EN 13255:2001	Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals
EN 13256:2001	Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures
EN 13257:2001	Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals
EN 13258:2003	Materials and articles in contact with foodstuffs. Test methods for crazing resistance of ceramic articles
EN 1326:1996	Gas welding equipment. Small kits for gas brazing and welding
EN 13260:2003	Railway applications. Wheelsets and bogies. Wheelsets. Products requirements
EN 13261:2003	Railway applications. Wheelsets and bogies. Axles. Product requirements
EN 13262:2004	Railway applications. Wheelsets and bogies. Wheels. Product requirement
EN 13264:2001	Ventilation for buildings. Floor mounted air terminal devices. Tests for structural classification
EN 13265:2001	Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects
EN 13266:2001	Slow-release fertilizers. Determination of the release of the nutrients. Method for coated fertilizers
EN 13267:2001	Surface active agents. Determination of water content. Karl Fischer method
EN 13268:2001	Surface active agents. Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
EN 1327:1996	Gas welding equipment. Thermoplastic hoses for welding and allied processes
EN 13270:2001	Surface active agents. Determination of the active matter content in alkyldimethylbetaines
EN 13271:2002	Timber fasteners. Characteristic load-carrying capacities and slip-moduli for connector joints
EN 13272:2001	Railway applications. Electrical lighting for rolling stock in public transport systems
EN 13273:2001	Surface active agents. Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
EN 13274-1:2001	Respiratory protective devices. Methods of test. Determination of inward leakage and total inward leakage
EN 13274-2:2001	Respiratory protective devices. Methods of test. Practical performance tests
EN 13274-3:2001	Respiratory protective devices. Methods of test. Determination of breathing resistance
EN 13274-4:2001	Respiratory protective devices. Methods of test. Flame tests
EN 13274-5:2001	Respiratory protective devices. Methods of test. Climatic conditions
EN 13274-6:2002	Respiratory protective devices. Methods of test. Determination of carbon dioxide content of the inhalation air
EN 13274-7:2002	Respiratory protective devices. Methods of test. Determination of particle filter penetration
EN 13274-8:2002	Respiratory protective devices. Methods of test. Determination of dolomite dust clogging
EN 13275:2000	Cryogenic vessels. Pumps for cryogenic service
EN 13277-1:2000	Protective equipment for martial arts. General requirements and test methods
EN 13277-2:2000	Protective equipment for martial arts. Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
EN 13277-3:2000	Protective equipment for martial arts. Additional requirements and test methods for trunk protectors
EN 13277-4:2001	Protective equipment for martial arts. Additional requirements and test methods for head protectors
EN 13277-5:2002	Protective equipment for martial arts. Additional requirements and test methods for genital protectors and abdominal protectors
EN 13277-6:2003	Protective equipment for martial arts. Additional requirements and test methods for breast protectors for females
EN 13278:2003	Open fronted gas-fired independent space heaters

EN 13279-2:2004	Gypsum binders and gypsum plasters. Test methods
EN 1328:1997	Cement bonded particleboards. Determination of frost resistance
EN 13280:2001	Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water
EN 13281:2000	Inland navigation vessels. Safety requirements for walkways and working places
EN 13283:2002	Zinc and zinc alloys. Secondary zinc
EN 13284-1:2002	Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
EN 13284-2:2004	Stationary source emissions. Determination of low range mass concentration of dust. Automated measuring systems
EN 13285:2003	Unbound mixtures. Specifications
EN 13286-1:2003	Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
EN 13286-2:2004	Unbound and hydraulically bound mixtures. Test methods for the determination of the laboratory reference density and water content. Proctor compaction
EN 13286-3:2003	Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Vibrocompression with controlled parameters
EN 13286-4:2003	Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Vibrating hammer
EN 13286-40:2003	Unbound and hydraulically bound mixtures. Test method for determination of the direct tensile strength of hydraulically bound mixtures
EN 13286-41:2003	Unbound and hydraulically bound mixtures. Test method for determination of the compressive strength of hydraulically bound mixtures
EN 13286-42:2003	Unbound and hydraulically bound mixtures. Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
EN 13286-43:2003	Unbound and hydraulically bound mixtures. Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
EN 13286-44:2003	Unbound and hydraulically bound mixtures. Test method for the determination of the alpha coefficient of vitrified blast furnace slag
EN 13286-45:2003	Unbound and hydraulically bound mixtures. Test method for the determination of the workability period of hydraulically bound mixtures
EN 13286-46:2003	Unbound and hydraulically bound mixtures. Test method for the determination of the moisture condition value
EN 13286-47:2004	Unbound and hydraulically bound mixtures. Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
EN 13286-49:2004	Unbound and hydraulically bound mixtures. Accelerated swelling test for soil treated by lime and/or hydraulic binder
EN 13286-5:2003	Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Vibrating table
EN 13286-50:2004	Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
EN 13286-51:2004	Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
EN 13286-52:2004	Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression
EN 13286-53:2004	Unbound and hydraulically bound mixtures. Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression
EN 13286-7:2004	Unbound and hydraulically bound mixtures. Cyclic load triaxial test for unbound mixtures
EN 13287:2004	Safety, protective and occupational footwear for professional use. Test method for slip resistance
EN 13289:2001	Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
EN 13290-1:1999	Space project management. General requirements. Policy and principles
EN 13290-2:2001	Space project management. General requirements. Project breakdown structure
EN 13290-3:2001	Space project management. General requirements. Project organisation
EN 13290-4:2001	Space project management. General requirements. Project phasing and planning
EN 13290-5:2001	Space project management. General requirements. Configuration management
EN 13290-6:2001	Space project management. General requirements. Information/documentation management
EN 13290-7:2001	Space project management. General requirements. Cost and schedule management
EN 1329-1:2000	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U).
EN 13291-1:1999	Space products assurance. General requirements. Policy and principles
EN 13291-2:2003	Space product assurance. General requirements. Quality assurance
EN 13291-3:2003	Space products assurance. General requirements. Materials, mechanical parts and processes
EN 13292:1999	Space engineering standards. Policy and principles
EN 13293:2002	Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity
EN 13294:2002	Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time
EN 13295:2004	Products and systems for the protection and repair of concrete structures.Test methods. Determination of resistance to carbonation
EN 13297:2000	Textile floor coverings. Classification of needled pile floor coverings
EN 13298:2003	Railway applications. Suspension components. Helical suspension springs, steel
EN 13299:2000	Fertilizers. Determination of flow rate
EN 133:2001	Respiratory protective devices. Classification
EN 13300:2001	Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification
EN 133000:1997	Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
EN 1330-1:1998	Non-destructive testing. Terminology. List of general terms
EN 13301:2003	Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of staining tendency of bitumens
EN 1330-10:2003	Non-destructive testing. Terminology. Terms used in visual testing
EN 1330-2:1998	Non-destructive testing. Terminology. Terms common to the non-destructive testing methods
EN 13302:2003	Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of viscosity of bitumen using a rotating spindle apparatus
EN 1330-3:1997	Non-destructive testing. Terminology. Terms used in industrial radiographic testing
EN 13303:2003	Methods of test for petroleum and its products. BS 2000-506. Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumens
EN 1330-4:2000	Non-destructive testing. Terminology. Terms used in ultrasonic testing
EN 13304:2003	Bitumen and bituminous binders. Framework for specification of oxidised bitumens
EN 1330-5:1998	Non-destructive testing. Terminology. Terms used in eddy current testing
EN 13305:2003	Bitumen and bituminous binders. Framework of specification of hard industrial bitumens
EN 13306:2001	Maintenance terminology
EN 1330-7:2005	Non-destructive testing. Terminology. Terms used in magnetic particle testing
EN 1330-8:1998	Non-destructive testing. Terminology. Terms used in leak tightness testing
EN 13308:2002	Tanks for transport of dangerous goods. Service equipment for tanks. Non pressure balanced footvalve
EN 13309:2000	Construction machinery. Electromagnetic compatibility of machines with internal electrical power supply
EN 1330-9:2000	Non-destructive testing. Terminology. Terms used in acoustic emission testing
EN 13310:2003	Kitchen sinks. Functional requirements and test methods
EN 133100:1998	Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression.
EN 133101:1998	Harmonized system of quality assessment for electronic components. Blank detail specification:passive filter units for electromagnetic interference suppression.
EN 13311-1:2001	Biotechnology. Performance criteria for vessels. General performance criteria
EN 13311-2:2001	Biotechnology. Performance criteria for vessels. Pressure protection devices
EN 13311-3:2001	Biotechnology. Performance criteria for vessels. Glass pressure vessels
EN 13311-4:2001	Biotechnology. Performance criteria for vessels. Bioreactors
EN 13311-5:2001	Biotechnology. Performance criteria for vessels. Kill tanks
EN 13311-6:2001	Biotechnology. Performance criteria for vessels. Chromatography columns
EN 13312-1:2001	Biotechnology. Performance criteria for piping and instrumentation. General performance criteria
EN 13312-2:2001	Biotechnology. Performance criteria for piping and instrumentation. Couplings
EN 13312-3:2001	Biotechnology. Performance criteria for piping and instrumentation. Sampling and inoculation devices
EN 13312-4:2001	Biotechnology. Performance criteria for piping and instrumentation. Tubes and pipes
EN 13312-5:2001	Biotechnology. Performance criteria for piping and instrumentation. Valves
EN 13312-6:2001	Biotechnology. Performance criteria for piping and instrumentation. Equipment probes
EN 13313:2001	Refrigerating systems and heat pumps. Competence of personnel
EN 13314:2002	Tanks for transport of dangerous goods. Service equipment for tanks. Fill hole cover
EN 13315:2002	Tanks for transport of dangerous goods. Service equipment for tanks. Gravity discharge coupler
EN 13316:2002	Tanks for transport of dangerous goods. Service equipment for tanks. Pressure balanced footvalve
EN 13317:2002	Tanks for transport of dangerous goods. Service equipment for tanks. Manhole cover assembly
EN 13318:2000	Screed material and floor screeds. Definitions
EN 13319:2000	Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods
EN 13320:2002	Surface active agents. Gas chromatographic trace determination of free ethylene oxide in ethoxylates
EN 133200:1999	Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression
EN 133201:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression.
EN 1332-1:1999	Identification card systems. Man-machine interface. Design principles for the user interface
EN 1332-2:1998	Identification card systems. Man-machine interface. Dimensions and location of a tactile identifier for ID-1 cards
EN 133221:1998	Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression.
EN 13322-1:2003	Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Carbon steel
EN 13322-2:2003	Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Stainless steel
EN 1332-3:1999	Identification card systems. Man-machine interface. Key pads
EN 1332-4:1999	Identification card systems. Man-machine interface. Coding of user requirements for people with special needs
EN 13328-1:2001	Breathing system filters for anaesthetic and respiratory use. Salt test method to assess filtration performance
EN 13328-2:2002	Breathing system filters for anaesthetic and respiratory use. Non-filtration aspects
EN 13329:2000	Laminate floor coverings. Specifications, requirements and test methods
EN 1333:1997	Pipework components. Definition and selection of PN
EN 13330:2002	Shutters. Hard body impact. Test method
EN 13331-1:2002	Trench lining systems. Product specifications
EN 13331-2:2002	Trench lining systems. Assessment by calculation or test
EN 13335:2002	Leather. Physical and mechanical tests. Determination of flex resistance by the vamp flex method
EN 13336:2004	Leather. Upholstery leather characteristics. Guide for selection of leather for furniture
EN 1334:1996	Domestic furniture. Beds and mattresses. Methods of measurement and recommended tolerances
EN 13341:2005	Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels. Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6
EN 13342:2000	Characterization of sludges. Determination of Kjeldahl nitrogen
EN 13346:2000	Characterization of sludges. Determination of trace elements and phosphorous. Aqua regia extraction methods
EN 13347:2002	Copper and copper alloys. Rod and wire for welding and braze welding
EN 13348:2001	Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
EN 13349:2002	Copper and copper alloys. Pre-insulated copper tubes with solid covering

EN 1335-1:2000	Office furniture. Office work chair. Dimensions. Determination of dimensions
EN 1335-2:2000	Office furniture. Office work chair. Safety requirements
EN 13352:2002	Specification for the performance of automatic tank contents gauges
EN 1335-3:2000	Office furniture. Office work chair. Safety test methods
EN 13353:2003	Solid wood panels (SWP). Requirements
EN 13355:2004	Coating plants. Combined booths. Safety requirements
EN 13356:2001	Visibility accessories for non-professional use. Test methods and requirements
EN 13357:2002	Methods of test for petroleum and its products. BS 2000-502. Bitumen and bituminous binders. Determination of the efflux time of petroleum cut-back and fluxed bitumens
EN 13358:2004	Methods of test for petroleum and its products. BS 2000-525. Bitumen and bituminous binders. Determination of the distillation characteristics of petroleum cut-back bitumen products
EN 13360:2002	Rubber- or plastics-coated fabrics. Terminology
EN 13361:2004	Geosynthetic barriers. Characteristics required for use as a fluid barrier in the construction of reservoirs and dams
EN 13363-1:2003	Solar protection devices combined with glazing. Calculation of solar and light transmittance. Simplified method
EN 13364:2002	Natural stone test methods. Determination of the breaking load at dowel hole
EN 13365:2002	Transportable gas cylinders. Cylinder bundles for permanent and liquefied gases (excluding acetylene). Inspection at time of filling
EN 13366:2001	Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
EN 13368-1:2001	Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDTA, HEDTA and DTPA
EN 13368-2:2001	Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDDHA and EDDHMA
EN 13369:2004	Common rules for precast concrete products
EN 13370:2003	Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN$u-, F$u-
EN 1337-1:2000	Structural bearings. General design rules
EN 13371:2002	Cryogenic vessels. Couplings for cryogenic service
EN 1337-10:2003	Structural bearings. Inspection and maintenance
EN 1337-11:1998	Structural bearings. Transport, storage and installation
EN 1337-2:2001	Structural bearings. Sliding elements
EN 13372:2004	Road transport and traffic telematics (RTTT). Dedicated short-range communication. Profiles for RTTT applications
EN 13373:2003	Natural stone test methods. Determination of geometric characteristics on units
EN 13374:2004	Temporary edge protection systems. Product specification, test methods
EN 1337-4:2004	Structural bearings. Roller bearings
EN 13375:2004	Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation
EN 1337-6:2004	Structural bearings. Rocker bearings
EN 1337-7:2001	Structural bearings. Spherical and cylindrical PTFE bearings
EN 13377:2002	Prefabricated timber formwork beams. Requirements, classification and assessment
EN 13378:2001	Pasta processing plants. Pasta presses. Safety and hygiene requirements
EN 1337-9:1998	Structural bearings. Protection
EN 13379:2001	Pasta processing plants. Spreader, stripping and cutting machine, stick return conveyor, stick magazine. Safety and hygiene requirements
EN 1338:2003	Concrete paving blocks. Requirements and test methods
EN 13380:2001	General requirements for components used for renovation and repair of drain and sewer systems outside buildings
EN 13382:2002	Flat pallets for materials handling. Principal dimensions
EN 13383-1:2002	Armourstone. Specification
EN 13383-2:2002	Armourstone. Test methods
EN 13384-1:2002	Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving one appliance
EN 13384-2:2003	Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving more than one heating appliance
EN 13385:2002	Transportable gas cylinders. Battery vehicles for permanent and liquefied gases (excluding acetylene). Inspection at time of filling
EN 1339:2003	Concrete paving flags. Requirements and test methods
EN 13390:2002	Food processing machinery. Pie and tart machines. Safety and hygiene requirements
EN 13391:2004	Mechanical tests for post-tensioning systems
EN 13392:2001	Textiles. Monofilaments. Determination of linear density
EN 13393:2001	Packaging. Specification for edge protectors
EN 13394:2001	Packaging. Specification for non-metallic tensional strapping
EN 13395-1:2002	Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of thixotropic mortars
EN 13395-2:2002	Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of grout or mortar
EN 13395-3:2002	Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of repair concrete
EN 13395-4:2002	Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Application of repair mortar overhead
EN 13396:2004	Products and systems for the protection and repair of concrete structures. Test methods. Measurement of chloride ion ingress
EN 13397:2002	Industrial valves. Diaphragm valves made of metallic materials
EN 13398:2003	Methods of test for petroleum and its products. BS2000-516. Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen
EN 13399:2003	Methods of test for petroleum and its products. BS2000-517. Bitumen and bituminous binders. Determination of storage stability of modified bitumen
EN 134:1998	Respiratory protective devices. Nomenclature of components
EN 1340:2003	Concrete kerb units. Requirements and test methods
EN 13400:2002	Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
EN 134000:1995	Harmonized system of quality assessment for electronic components. Generic specification: variable capacitors. (Qualification approval and capability approval)
EN 13402-1:2001	Size designation of clothes. Terms, definitions and body measurement procedure
EN 13402-2:2002	Size designation of clothes. Primary and secondary dimensions
EN 13402-3:2004	Size designation of clothes. Measurements and intervals
EN 13403:2003	Ventilation for buildings. Non metallic ducts. Ductwork made from insulation ductboards
EN 13405:2002	Surface active agents. Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC)
EN 13406:2002	Agricultural machinery. Slurry tankers and spreading devices. Environmental protection. Requirements and test methods for the spreading precision
EN 13408:2002	Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of bond strength
EN 13409:2002	Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of setting time
EN 1341:2001	Slabs of natural stone for external paving. Requirements and test methods
EN 13410:2001	Gas-fired overhead radiant heaters. Ventilation requirements for non-domestic premises
EN 134100:1996	Harmonized system of quality assessment for electronic components. Sectional specification: variable capacitors (Qualification approval)
EN 134101:1995	Specification for harmonized system of quality assessment for electronic components. Blank detail specification: single turn disc trimmer capacitors (qualification approval)
EN 134102:1995	Specification for harmonized system of quality assessment for electronic components. Blank detail specification: multi turn concentric capacitors (qualification approval)
EN 134103:1995	Specification for harmonized system of quality assessment for electronic components. Blank detail specification: vane type air dielectric capacitors (qualification approval)
EN 134104:1995	Specification for harmonized system of quality assessment for electronic components. Blank detail specification: compression type trimmer capacitors (qualification approval)
EN 13411-1:2002	Terminations for steel wire ropes. Safety. Thimbles for steel wire rope slings
EN 13411-2:2001	Terminations for steel wire ropes. Safety. Splicing of eyes for wire rope slings
EN 13411-3:2004	Terminations for steel wire ropes. Safety. Ferrules and ferrule-securing
EN 13411-4:2002	Terminations for steel wire ropes. Safety. Metal and resin socketing
EN 13411-5:2003	Terminations for steel wire ropes. Safety. U-bolt wire rope grips
EN 13411-6:2004	Terminations for steel wire ropes. Safety. Asymmetric wedge socket
EN 13412:2002	Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
EN 13413:2002	Resilient floor coverings. Polyvinyl chloride floor coverings on a filled fibrous backing. Specification
EN 13414-1:2003	Steel wire rope slings. Safety. Slings for general lifting service
EN 13414-2:2003	Steel wire rope slings. Safety. Specification for information for use and maintenance to be provided by the manufacturer
EN 13414-3:2003	Steel wire rope slings. Safety. Grommets and cable-laid slings
EN 13415:2002	Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films
EN 13416:2001	Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling
EN 13417-1:2001	Reinforcement. Specifications for woven fabrics. Designation
EN 13417-2:2001	Reinforcement. Specifications for woven fabrics. Methods of test and general requirements
EN 13417-3:2001	Reinforcement. Specifications for woven fabrics. Specific Requirements
EN 13418:2004	Rubber and plastics machines. Winding machines for film or sheet. Safety requirements
EN 1342:2001	Setts of natural stone for external paving. Requirements and test methods
EN 13422:2004	Vertical road signs. Portable deformable warning devices and delineators. Portable road traffic signs. Cones and cylinders
EN 13423:2000	Compressed natural gas vehicle operations
EN 13427:2004	Packaging. Requirements for the use of European Standards in the field of packaging and packaging waste
EN 13428:2004	Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction
EN 13429:2004	Packaging. Reuse
EN 1343:2001	Kerbs of natural stone for external paving. Requirements and test methods
EN 13430:2004	Packaging. Requirements for packaging recoverable by material recycling
EN 13431:2004	Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
EN 13432:2000	Packaging. Requirements for packaging recoverable through composting and biodegradation. Test scheme and evaluation criteria for the final acceptance of packaging
EN 13435:2002	Surface active agents. Determination of free amine content of alkyl dimethyl betaines
EN 13437:2003	Packaging and material recycling. Criteria for recycling methods. Description of recycling processes and flow chart
EN 13439:2003	Packaging. Rate of energy recovery. Definition and method of calculation
EN 1344:2002	Clay pavers. Requirements and test methods
EN 13440:2003	Packaging. Rate of recycling. Definition and method of calculation
EN 13441:2002	Biotechnology. Laboratories for research, development and analysis. Guidance on containment of genetically modified plants
EN 13442:2002	Wood and parquet flooring and wood panelling and cladding. Determination of the resistance to chemical agents
EN 13443-1:2002	Water conditioning equipment inside buildings. Mechanical filters. Performance rating 80 $Gmm to 150 $Gmm. Requirements for performances, safety and testing
EN 13444-1:2001	Electrically propelled road vehicles. Measurement of emissions of hybrid vehicles. Electrically propelled road vehicles. Measurement of emissions of hybrid vehicles.
EN 13445-1:2002	Unfired pressure vessels. General
EN 13445-2:2002	Unfired pressure vessels. Materials
EN 13445-3:2002	Unfired pressure vessels. Design