Designation Title
ISO 404:1992 Steel and steel products — General technical delivery requirements
ISO 630:1995 Structural steels — Plates, wide flats, bars, sections and profiles
ISO 1052:1982 Steels for general engineering purposes
ISO 3755:1991 Cast carbon steels for general engineering purposes
ISO 4885:1996 Ferrous products — Heat treatments — Vocabulary
ISO 6929:1987 Steel products — Definitions and classification
ISO 9477:1992 High strength cast steels for general engineering and structural purposes
ISO 10474:1991 Steel and steel products — Inspection documents
ISO 683-1:1987 Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Direct-hardening unalloyed and low-alloyed
wrought steel in form of different black products
ISO 683-9:1988 Heat-treatable steels, alloy steels and free-cutting steels — Part 9: Wrought free-cutting steels
ISO 683-10:1987 Heat-treatable steels, alloy steels and free-cutting steels — Part 10: Wrought nitriding steels
ISO 683-11:1987 Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Wrought case-hardening steels
ISO 683-15:1992 Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines
ISO 683-17:1999 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
ISO 683-18:1996 Heat-treatable steels, alloy steels and free- cutting steels — Part 18: Bright products of unalloyed and low alloy steels
ISO 4954:1993 Steels for cold heading and cold extruding
ISO 4955:1994 Heat-resisting steels and alloys
ISO 5949:1983 Tool steels and bearing steels — Micrographic method for assessing the distribution of carbides using reference
photomicrographs
ISO 9443:1991 Heat-treatable and alloy steels — Surface quality classes for hot-rolled round bars and wire rods — Technical delivery
conditions
ISO 9444:1990 Hot-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
ISO 9445:1990 Cold-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
ISO 9446:1990 Hot-rolled stainless steel narrow strip — Tolerances on dimensions and form
ISO 9447:1990 Cold-rolled stainless steel narrow strip — Tolerances on dimensions and form
ISO/TR 11637:1997 Boron treated engineering steels for quenching and tempering
ISO 6934-1:1991 Steel for the prestressing of concrete — Part 1: General requirements
ISO 6934-2:1991 Steel for the prestressing of concrete — Part 2: Cold-drawn wire
ISO 6934-3:1991 Steel for the prestressing of concrete — Part 3: Quenched and tempered wire
ISO 6934-4:1991 Steel for the prestressing of concrete — Part 4: Strand
ISO 6934-5:1991 Steel for the prestressing of concrete — Part 5: Hot-rolled steel bars with or without subsequent processing
ISO 6935-1:1991 Steel for the reinforcement of concrete — Part 1: Plain bars
ISO 6935-2:1991 Steel for the reinforcement of concrete — Part 2: Ribbed bars
ISO 6935-3:1992 Steel for the reinforcement of concrete — Part 3: Welded fabric
ISO 10065:1990 Steel bars for reinforcement of concrete — Bend and rebend tests
ISO 10144:1991 Certification scheme for steel bars and wires for the reinforcement of concrete structures
ISO 10287:1992 Steel for the reinforcement of concrete — Determination of strength of joints in welded fabric
ISO 10544:1992 Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric
ISO 10606:1995 Steel for the reinforcement of concrete — Determination of percentage total elongation at maximum force
ISO 11082:1992 Certification scheme for welded fabric for the reinforcement of concrete structures
ISO/TR 12662:1997 Certification scheme for prestressing steels
ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete
ISO 14655:1999 Epoxy-coated strand for the prestressing of concrete
ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
ISO 11692:1994 Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
ISO 683-1:1987 Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Direct-hardening unalloyed and low-alloyed
wrought steel in form of different black products
ISO 683-9:1988 Heat-treatable steels, alloy steels and free-cutting steels — Part 9: Wrought free-cutting steels
ISO 683-10:1987 Heat-treatable steels, alloy steels and free-cutting steels — Part 10: Wrought nitriding steels
ISO 683-11:1987 Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Wrought case-hardening steels
ISO 683-15:1992 Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines
ISO 683-17:1999 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
ISO 683-18:1996 Heat-treatable steels, alloy steels and free- cutting steels — Part 18: Bright products of unalloyed and low alloy steels
ISO 4952:1981 Structural steels with improved atmospheric corrosion resistance
ISO 4954:1993 Steels for cold heading and cold extruding
ISO 4955:1994 Heat-resisting steels and alloys
ISO 5949:1983 Tool steels and bearing steels — Micrographic method for assessing the distribution of carbides using reference
photomicrographs
ISO 7153-1:1991 Surgical instruments — Metallic materials — Part 1: Stainless steel Amd 1:1999
ISO 9443:1991 Heat-treatable and alloy steels — Surface quality classes for hot-rolled round bars and wire rods — Technical delivery
conditions
ISO 9444:1990 Hot-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
ISO 9445:1990 Cold-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
Designation Title
ISO 9446:1990 Hot-rolled stainless steel narrow strip — Tolerances on dimensions and form
ISO 9447:1990 Cold-rolled stainless steel narrow strip — Tolerances on dimensions and form
ISO 11692:1994 Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
ISO 11972:1998 Corrosion-resistant cast steels for general applications
ISO 11973:1999 Heat-resistant cast steels and alloys for general applications
ISO/TR 15510:1997 Stainless steels — Chemical composition
ISO 683-14:1992 Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered
springs
ISO 6931-1:1994 Stainless steels for springs — Part 1: Wire
ISO 6931-2:1989 Stainless steels for springs — Part 2: Strip
ISO 8458-1:1989 Steel wire for mechanical springs — Part 1: General requirements
ISO 8458-2:1989 Steel wire for mechanical springs — Part 2: Cold-drawn carbon steel wire
ISO 8458-3:1992 Steel wire for mechanical springs — Part 3: Oil-hardened and tempered wire
ISO 9442:1988 Steel — Hot-rolled ribbed and grooved flats for spring leaves — Tolerances and dimensions
ISO 2605-1:1976 Steel products for pressure purposes — Derivation and verification of elevated temperature properties — Part 1: Yield
or proof stress of carbon and low alloy steel products
ISO 2605-2:1976 Steel products for pressure purposes — Derivation and verification of elevated temperature properties — Part 2: Proof
stress of austenitic steel products
ISO 2605-3:1985 Steel products for pressure purposes — Derivation and verification of elevated temperature properties — Part 3: An
alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
ISO 4978:1983 Flat rolled steel products for welded gas cylinders
ISO 4991:1994 Steel castings for pressure purposes
ISO 6303:1981 Pressure vessel steels not included in ISO 2604, Parts 1 to 6 — Derivation of long-time stress rupture properties
ISO/TR 7468:1981 Summary of average stress rupture properties of wrought steels for boilers and pressure vessels
ISO 9327-1:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General
requirements
ISO 9327-2:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and
alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties
ISO 9327-3:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 3: Nickel steels
with specified low temperature properties
ISO 9327-4:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine
grain steels with high proof strength
ISO 9327-5:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless
steels
ISO 9328-1:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 1: General requirements
ISO 9328-2:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and low-alloyed
steels with specified room temperature and elevated temperature properties
ISO 9328-3:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 3: Nickel-alloyed steels with
specified low temperature properties
ISO 9328-4:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with
high proof stress supplied in the normalized or quenched and tempered condition
ISO 9328-5:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 5: Austenitic steels
ISO 4957:1999 Tool steels
ISO 5949:1983 Tool steels and bearing steels — Micrographic method for assessing the distribution of carbides using reference
photomicrographs
ISO 11054:1993 Cutting tools — Designation of high-speed steel groups
ISO 683-1:1987 Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Direct-hardening unalloyed and low-alloyed
wrought steel in form of different black products
ISO 683-18:1996 Heat-treatable steels, alloy steels and free- cutting steels — Part 18: Bright products of unalloyed and low alloy steels
ISO 3573:1999 Hot-rolled carbon steel sheet of commercial and drawing qualities
ISO 3574:1999 Cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 3575:1996 Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
ISO 4950-1:1995 High yield strength flat steel products — Part 1: General requirements
ISO 4950-2:1995 High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
ISO 4950-3:1995 High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered)
condition
ISO 4960:1999 Cold-reduced carbon steel strip with a carbon content over 0,25 %
ISO 4995:1993 Hot-rolled steel sheet of structural quality
ISO 4996:1999 Hot-rolled steel sheet of high yield stress structural quality
ISO 4997:1999 Cold-reduced steel sheet of structural quality
ISO 4998:1996 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
ISO 4999:1999 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial drawing and structural
qualities
ISO 5000:1993 Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 5001:1999 Cold-reduced carbon steel sheet for vitreous enamelling
Designation Title
ISO 5002:1999 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
ISO 5950:2000 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 5951:1993 Hot-rolled steel sheet of higher yield strength with improved formability
ISO 5952:1998 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
ISO 5954:1998 Cold-reduced carbon steel sheet according to hardness requirements
ISO 6316:2000 Hot-rolled steel strip of structural quality
ISO 6317:2000 Hot-rolled carbon steel strip of commercial and drawing qualities
ISO 6930-1:2001 High yield strength steel plates and wide flats for cold forming — Part 1: Delivery conditions for thermomechanicallyrolled steels
ISO 6932:1986 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 7452:1984 Hot-rolled structural steel plates — Tolerances on dimensions and shape
ISO 7778:1983 Steel plate with specified through-thickness characteristics
ISO 7788:1985 Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements
ISO 9034:1987 Hot-rolled structural steel wide flats — Tolerances on dimensions and shape
ISO 9328-1:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 1: General requirements
ISO 9328-2:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and low-alloyed
steels with specified room temperature and elevated temperature properties
ISO 9328-3:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 3: Nickel-alloyed steels with
specified low temperature properties
ISO 9328-4:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with
high proof stress supplied in the normalized or quenched and tempered condition
ISO 9328-5:1991 Steel plates and strips for pressure purposes — Technical delivery conditions — Part 5: Austenitic steels
ISO 9364:1991 Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, lock-forming and structural qualities
ISO 9444:1990 Hot-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
ISO 9445:1990 Cold-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
ISO 9446:1990 Hot-rolled stainless steel narrow strip — Tolerances on dimensions and form
ISO 9447:1990 Cold-rolled stainless steel narrow strip — Tolerances on dimensions and form
ISO 9473:1988 Textile machinery and accessories — Strip steel for dents of reeds
ISO 10384:1992 Hot-rolled carbon steel sheet for machinery
ISO 11949:1995 Cold-reduced electrolytic tinplate
ISO 11950:1995 Cold-reduced electrolytic chromium/chromium oxide-coated steel
ISO 11951:1995 Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated
steel
ISO 13887:1995 Cold-reduced steel sheet of higher yield strength with improved formability
ISO 13976:1998 Hot-rolled steel sheet in coils of structural quality and heavy thickness
ISO 14590:1999 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
ISO 14788:1998 Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils
ISO 16160:2000 Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
ISO 16162:2000 Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
ISO 16163:2000 Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round
ISO 1035-1:1980 Hot-rolled steel bars — Part 1: Dimensions of round bars
ISO 1035-2:1980 Hot-rolled steel bars — Part 2: Dimensions of square bars
ISO 1035-3:1980 Hot-rolled steel bars — Part 3: Dimensions of flat bars
ISO 1035-4:1982 Hot-rolled steel bars — Part 4: Tolerances
ISO 2938:1974 Hollow steel bars for machining
ISO 4951-1:2001 High yield strength steel bars and sections — Part 1: General delivery requirements
ISO 4951-2:2001 High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and asrolled steels
ISO 4951-3:2001 High yield strength steel bars and sections — Part 3: Delivery conditions for thermomechanically-rolled steels
ISO 9443:1991 Heat-treatable and alloy steels — Surface quality classes for hot-rolled round bars and wire rods — Technical delivery
conditions
ISO 2232:1990 Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes —
Specifications
ISO 2408:1985 Steel wire ropes for general purposes — Characteristics
ISO 2532:1974 Steel wire ropes — Vocabulary
ISO 2701:1977 Drawn wire for general purpose non-alloy steel wire ropes — Terms of acceptance
ISO 3108:1974 Steel wire ropes for general purposes — Determination of actual breaking load
ISO 3178:1988 Steel wire ropes for general purposes — Terms of acceptance
ISO 3189-1:1985 Sockets for wire ropes for general purposes — Part 1: General characteristics and conditions of acceptance
ISO 3189-2:1985 Sockets for wire ropes for general purposes — Part 2: Special requirements for sockets produced by forging or
machined from the solid
ISO 3189-3:1985 Sockets for wire ropes for general purposes — Part 3: Special requirements for sockets produced by casting
ISO 3578:1980 Steel wire ropes — Standard designations
ISO 4101:1983 Drawn steel wire for elevator ropes — Specifications
Designation Title
ISO 4344:1983 Steel wire ropes for lifts
ISO 4345:1988 Steel wire ropes — Fibre main cores — Specification
ISO 4346:1977 Steel wire ropes for general purposes — Lubricants — Basic requirements
ISO 6984:1990 Round non-alloy steel wires for stranded wire ropes for mine hoisting — Specifications
ISO 7531:1987 Wire rope slings for general purposes — Characteristics and specifications
ISO 7595:1984 Socketing procedures for wire ropes — Molten metal socketing
ISO/TR 7596:1982 Socketing procedures for wire ropes — Resin socketing
ISO 7900:1988 Zinc-coated steel wire for fencing
ISO 7989:1988 Zinc coatings for steel wire
ISO 8369:1986 Large diameter steel wire ropes
ISO 8457-1:1989 Steel wire rod — Part 1: Dimensions and tolerances
ISO 8457-2:1989 Steel wire rod — Part 2: Quality requirements for unalloyed steel wire rods for conversion to wire
ISO 8792:1986 Wire rope slings — Safety criteria and inspection procedures for use
ISO 8793:1986 Steel wire ropes — Ferrule-secured eye terminations
ISO 8794:1986 Steel wire ropes — Spliced eye terminations for slings
ISO 9975:1990 Round non-alloy steel wires for locked coil mine winding ropes — Specifications
ISO 10092:1990 High breaking load steel wire ropes — Specifications
ISO 657-1:1989 Hot-rolled steel sections — Part 1: Equal-leg angles — Dimensions
ISO 657-2:1989 Hot-rolled steel sections — Part 2: Unequal-leg angles — Dimensions
ISO 657-5:1976 Hot-rolled steel sections — Part 5: Equal-leg angles and unequal-leg angles — Tolerances for metric and inch series
ISO 657-11:1980 Hot-rolled steel sections — Part 11: Sloping flange channel sections (Metric series) — Dimensions and sectional
properties
ISO 657-13:1981 Hot-rolled steel sections — Part 13: Tolerances on sloping flange beam, column and channel sections
ISO 657-15:1980 Hot-rolled steel sections — Part 15: Sloping flange beam sections (Metric series) — Dimensions and sectional
properties
ISO 657-16:1980 Hot-rolled steel sections — Part 16: Sloping flange column sections (metric series) — Dimensions and sectional
properties
ISO 657-18:1980 Hot-rolled steel sections — Part 18: L sections for shipbuilding (metric series) — Dimensions, sectional properties and
tolerances
ISO 657-19:1980 Hot-rolled steel sections — Part 19: Bulb flats (metric series) — Dimensions, sectional properties and tolerances
ISO 657-21:1983 Hot-rolled steel sections — Part 21: T-sections with equal depth and flange width — Dimensions
ISO 4951-1:2001 High yield strength steel bars and sections — Part 1: General delivery requirements
ISO 4951-2:2001 High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and asrolled steels
ISO 4951-3:2001 High yield strength steel bars and sections — Part 3: Delivery conditions for thermomechanically-rolled steels
ISO 559:1991 Steel tubes for water and sewage
ISO 630-2:2000 Structural steels — Part 2: Technical delivery requirements for hot-finished hollow sections
ISO 657-14:2000 Hot-rolled steel sections — Part 14: Hot-finished structural hollow sections — Dimensions and sectional properties
ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers — Dimensions, tolerances and conventional masses per
unit length
ISO 2037:1992 Stainless steel tubes for the food industry
ISO 2604-2:1975 Steel products for pressure purposes — Quality requirements — Part 2: Wrought seamless tubes
ISO 2604-3:1975 Steel products for pressure purposes — Quality requirements — Part 3: Electric resistance and induction-welded tubes
ISO 2604-5:1978 Steel products for pressure purposes — Quality requirements — Part 5: Longitudinally welded austenitic stainless steel
tubes
ISO 2604-6:1978 Steel products for pressure purposes — Quality requirements — Part 6: Submerged arc longitudinally or spirally
welded steel tubes
ISO 2937:1974 Plain end seamless steel tubes for mechanical application
ISO 3183-1:1996 Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of
requirement class A
ISO 3183-2:1996 Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of
requirements class B
ISO 3183-3:1999 Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of
requirement class C, Cor 1:2000
ISO 4019:1982 Cold-finished steel structural hollow sections — Dimensions and sectional properties
ISO 6594:1983 Cast iron drainage pipes and fittings — Spigot series
ISO 6600:1980 Ductile iron pipes — Centrifugal cement mortar lining — Composition controls of freshly applied mortar
ISO 6758:1980 Welded steel tubes for heat exchangers
ISO 6759:1980 Seamless steel tubes for heat exchangers
ISO 9302:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing
for verification of hydraulic leak-tightness
ISO 9303:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic
testing for the detection of longitudinal imperfections
ISO 9304:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Eddy current testing for
the detection of imperfections
Designation Title
ISO 9305:1989 Seamless steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of transverse
imperfections
ISO 9329-1:1989 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified
room temperature properties
ISO 9329-2:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels
with specified elevated temperature properties
ISO 9329-3:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels
with specified low temperature properties
ISO 9329-4:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels
ISO 9330-1:1990 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with
specified room temperature properties
ISO 9330-2:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction
welded unalloyed and alloyed steel tubes with specified elevated temperature properties
ISO 9330-3:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction
welded unalloyed and alloyed steel tubes with specified low temperature properties
ISO 9330-4:2000 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed
and alloyed steel tubes with specified elevated temperature properties
ISO 9330-5:2000 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed
and alloyed steel tubes with specified low temperature properties
ISO 9330-6:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic
stainless steel tubes
ISO 9402:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral magnetic
transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
ISO 9598:1989 Seamless steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of
ferromagnetic steel tubes for the detection of transverse imperfections
ISO 9764:1989 Electric resistance and induction welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for
the detection of longitudinal imperfections
ISO 9765:1990 Submerged arc-welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of
longitudinal and/or transverse imperfections
ISO 10124:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the
detection of laminar imperfections
ISO 10332:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the
verification of hydraulic leak-tightness
ISO 10543:1993 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness
testing
ISO 10763:1994 Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working
pressures
ISO 10799:2001 Structural steels — Cold-formed, welded, structural hollow sections — Technical delivery requirements
ISO 11484:1994 Steel tubes for pressure purposes — Qualification and certification of non-destructive testing (NDT) personnel
ISO 11496:1993 Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar
imperfections
ISO 11960:1996 Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
ISO 11961:1996 Petroleum and natural gas industries — Steel pipes for use as drill pipe — Specification
ISO 12094:1994 Welded steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections in
strips/plates used in the manufacture of welded tubes
ISO 12095:1994 Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing
ISO 12096:1996 Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection
of imperfections
ISO 13663:1995 Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the weld seam for the detection
of laminar imperfections
ISO 13664:1997 Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube ends for the
detection of laminar imperfections
ISO 13665:1997 Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube body for the
detection of surface imperfections
ISO 13680:2000 Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and
coupling stock — Technical delivery conditions
ISO 13:1978 Grey iron pipes, special castings and grey iron parts for pressure main lines
ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
ISO 1127:1992 Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
ISO 2531:1998 Ductile iron pipes, fittings, accessories and their joints for water or gas applications
ISO 2604-2:1975 Steel products for pressure purposes — Quality requirements — Part 2: Wrought seamless tubes
ISO 2604-3:1975 Steel products for pressure purposes — Quality requirements — Part 3: Electric resistance and induction-welded tubes
ISO 2604-5:1978 Steel products for pressure purposes — Quality requirements — Part 5: Longitudinally welded austenitic stainless steel
tubes
ISO 2604-6:1978 Steel products for pressure purposes — Quality requirements — Part 6: Submerged arc longitudinally or spirally
welded steel tubes
Designation Title
ISO 3304:1985 Plain end seamless precision steel tubes — Technical conditions for delivery
ISO 3305:1985 Plain end welded precision steel tubes — Technical conditions for delivery
ISO 3306:1985 Plain end as-welded and sized precision steel tubes — Technical conditions for delivery
ISO 3545-1:1989 Steel tubes and fittings — Symbols for use in specifications — Part 1: Tubes and tubular accessories with circular
cross-section
ISO 3545-2:1989 Steel tubes and fittings — Symbols for use in specifications — Part 2: Square and rectangular hollow sections
ISO 4179:1985 Ductile iron pipes for pressure and non-pressure pipelines — Centrifugal cement mortar lining — General requirements
ISO 4200:1991 Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
ISO 5252:1991 Steel tubes — Tolerance systems
ISO 5256:1985 Steel pipes and fittings for buried or submerged pipe lines — External and internal coating by bitumen or coal tar
derived materials
ISO 6761:1981 Steel tubes — Preparation of ends of tubes and fittings for welding
ISO 7598:1988 Stainless steel tubes suitable for screwing in accordance with ISO 7-1
ISO 8179-1:1995 Ductile iron pipes — External zinc coating — Part 1: Metallic zinc with finishing layer
ISO 8179-2:1995 Ductile iron pipes — External zinc coating — Part 2: Zinc rich paint with finishing layer
ISO 8180:1985 Ductile iron pipes — Polyethylene sleeving
ISO 9095:1990 Steel tubes — Continuous character marking and colour coding for material identification
ISO 9302:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing
for verification of hydraulic leak-tightness
ISO 9303:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic
testing for the detection of longitudinal imperfections
ISO 9304:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Eddy current testing for
the detection of imperfections
ISO 9305:1989 Seamless steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of transverse
imperfections
ISO 9329-1:1989 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified
room temperature properties
ISO 9329-2:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels
with specified elevated temperature properties
ISO 9329-3:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels
with specified low temperature properties
ISO 9329-4:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels
ISO 9330-1:1990 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with
specified room temperature properties
ISO 9330-2:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction
welded unalloyed and alloyed steel tubes with specified elevated temperature properties
ISO 9330-3:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction
welded unalloyed and alloyed steel tubes with specified low temperature properties
ISO 9330-4:2000 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed
and alloyed steel tubes with specified elevated temperature properties
ISO 9330-5:2000 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed
and alloyed steel tubes with specified low temperature properties
ISO 9330-6:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic
stainless steel tubes
ISO 9402:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral magnetic
transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
ISO 9598:1989 Seamless steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of
ferromagnetic steel tubes for the detection of transverse imperfections
ISO 9764:1989 Electric resistance and induction welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for
the detection of longitudinal imperfections
ISO 9765:1990 Submerged arc-welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of
longitudinal and/or transverse imperfections
ISO 10124:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the
detection of laminar imperfections
ISO 10332:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the
verification of hydraulic leak-tightness
ISO 10543:1993 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness
testing
ISO 10803:1999 Design method for ductile iron pipes
ISO 11484:1994 Steel tubes for pressure purposes — Qualification and certification of non-destructive testing (NDT) personnel
ISO 11496:1993 Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar
imperfections
ISO 12094:1994 Welded steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections in
strips/plates used in the manufacture of welded tubes
ISO 12095:1994 Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing
Designation Title
ISO 12096:1996 Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection
of imperfections
ISO 13663:1995 Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the weld seam for the detection
of laminar imperfections
ISO 13664:1997 Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube ends for the
detection of laminar imperfections
ISO 13665:1997 Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube body for the
detection of surface imperfections
ISO 4986:1992 Steel castings — Magnetic particle inspection
ISO 4987:1992 Steel castings — Penetrant inspection
ISO 4990:1986 Steel castings — General technical delivery requirements
ISO 4991:1994 Steel castings for pressure purposes
ISO 4993:1987 Steel castings — Radiographic inspection
ISO 7186:1996 Ductile iron products for sewage applications
ISO 11970:2001 Specification and approval of welding procedures for production welding of steel castings
ISO 11971:1997 Visual examination of surface quality of steel castings
ISO 11972:1998 Corrosion-resistant cast steels for general applications
ISO 11973:1999 Heat-resistant cast steels and alloys for general applications
ISO 13521:1999 Austenitic manganese steel castings
ISO 13583-1:2000 Centrifugally cast steel and alloy products — Part 1: General testing and tolerances
ISO 9327-1:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General
requirements
ISO 9327-2:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and
alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties
ISO 9327-3:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 3: Nickel steels
with specified low temperature properties
ISO 9327-4:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine
grain steels with high proof strength
ISO 9327-5:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless
steels
ISO/TR 15461:1997 Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
ISO 1834:1999 Short link chain for lifting purposes — General conditions of acceptance
ISO 1835:1980 Short link chain for lifting purposes — Grade M (4), non-calibrated, for chain slings etc.
ISO 1837:1973 Lifting hooks — Nomenclature
ISO 2262:1984 General purpose thimbles for use with steel wire ropes — Specification
ISO 2308:1972 Hooks for lifting freight containers of up to 30 tonnes capacity — Basic requirements
ISO 2415:1987 Forged shackles for general lifting purposes — Dee shackles and bow shackles
ISO 3056:1986 Non-calibrated round steel link lifting chain and chain slings — Use and maintenance
ISO 3075:1980 Short link chain for lifting purposes — Grade S (6) non calibrated, for chain slings etc.
ISO 3076:1984 Short link chain for lifting purposes — Grade T (8), non-calibrated, for chain slings etc.
ISO 3077:1984 Short link chain for lifting purposes — Grade T (8), calibrated, for chain hoists and other lifting appliances
ISO 3266:1984 Eyebolts for general lifting purposes
ISO 4308-1:1986 Cranes and lifting appliances — Selection of wire ropes — Part 1: General
ISO 4308-2:1988 Cranes and lifting appliances — Selection of wire ropes — Part 2: Mobile cranes — Coefficient of utilization
ISO 4309:1990 Cranes — Wire ropes — Code of practice for examination and discard
ISO 4778:1981 Chain slings of welded construction — Grades M (4), S (6) and T (8)
ISO 4779:1986 Forged steel lifting hooks with point and eye for use with steel chains of grade M(4)
ISO 7592:1983 Calibrated round steel link lifting chains — Guidelines to proper use and maintenance
ISO 7593:1986 Chain slings assembled by methods other than welding — Grade T(8)
ISO 7597:1987 Forged steel lifting hooks with point and eye for use with steel chains of grade T(8)
ISO 8539:1986 Forged steel lifting components for use with grade T(8) chain