Duplex and super-duplex steels
A range of steels that combine high strength with excellent resistance to chloride stress and chloride pitting
corrosion. Used in desalination and upstream oil and gas applications.
William Cook Cast Products is approved to NORSOK M650 Ed. 4 for the manufacture of investment castings up to
60mm section thickness and sand castings up to 250mm section thickness in ASTM A995 grades 4A, 5A and 6A.
US UK German EN
Spec No. Grade Spec No. Grade Spec No. Grade Spec No. Grade
A995 (J93372) 1B(CD4MCuN) BS3100 332C13 DIN 17445 1.4517 EN 10283 GX2CrNiMoCuN25-6-3-3
A995 (J93345) 2A(CE8MN)
A995 (J93371) 3A(CD6MN) BS3100 332C15
A995 (J92205) 4A(CD3MN) EN 10283 GX2CrNiMoN22-5-3
A995 (J93404) 5A(CE3MN) DIN 17445 1.4468 EN 10283 GX2CrNiMoN25-6-3
A995 (J93380) 6A(CD3MWCuN) DIN 17445 1.4469 EN 10283 GX2CrNiMoN26-7-4
Nickel-based materials
A range of Ni-Cu, Ni-Mo and Ni-Cr superalloys with excellent corrosion and creep resistance, used in applications
exposed to extreme pressure and heat.
US UK German EN
Spec No. Grade Spec No. Grade Spec No. Grade Spec No. Grade
ASTM A494 CU5MCuC
ASTM A494 CW12MW
ASTM A494 CW2M
ASTM A494 CW6M
ASTM A494 CW6MC
ASTM A494 CX2MW
ASTM A494 CY40
ASTM A494 CZ100
ASTM A494 M25S
ASTM A494 M30C
ASTM A494 M30H
ASTM A494 M35-1
ASTM A494 N12MV
ASTM A494 N7M
Austenitic and super-austenitic stainless steels
A wide range of corrosion-resistant steels used in architectural, industrial, oil and gas, chemical, marine and many
other applications.
US UK German EN
Spec No. Grade Spec No. Grade Spec No. Grade Spec No. Grade
A351 CF3 BS3100 304C12 EN 10283 GX2CrNi19-11
A351 CF8 BS3100 304C15 DIN 17445 1.4308 EN 10283 GX5CrNi19-10
A351 CF3M BS3100 316C12 EN 10283 GX2CrNiMo19-11-2
A351 CF8M BS3100 316C16 DIN 17445 1.4408 EN 10283 GX5CrNiMo19-11-2
A351 CF10M
A351 CF8C BS3100 347C17 DIN 17445 1.4581 EN 10283 GX5CrNiNb19-11
BS3100 318C17 EN 10283 GX5CrNiMoNb19-11-2
SEW 395 1.3952
A351 CG8M BS3100 317C16
A351 CH20
A351 CK20
A351 CT15C SEW 595 1.4859
A351 CK3MCuN
UNS J95370
EN 10283 GX2NiCrMoCu25-20-5
A743 CN3M
A351 CN7M BS3100 332C11 SEW 410 1.4529
Ferritic, martensitic and precipitation hardening steels
A range of Fe-Cr-Ni alloys with varying combinations of corrosion, temperature and wear resistance.
US UK German EN
Spec No. Grade Spec No. Grade Spec No. Grade Spec No. Grade
ASTM A217/A743 CA15 BS3100 410C21 DIN 17445 1.4027 EN 10283 GX12Cr12
BS3100 420C24 DIN 17465 1.4729
ASTM A743 CA40/CA40F BS3146 ANC1C
BS3100 452C11 DIN 27465 1.4823
DIN 17245 1.4931
ASTM A747 CB7Cu-1 UNS 174PH
ASTM A352/A487/A743 CA6NM ’A’ BS3100 425C11 DIN 17445 1.4313 EN 10283 GX4CrNi13-4
ASTM A487 CA6NM ‘B’ BS3100 425C12
Heat-resistant stainless steels
A range of Fe-Cr-Ni alloys with excellent resistance to high temperature oxidation and creep. Used in high
temperature applications such as heat treatment furnace furniture and steel processing plants.
US UK German EN
Spec No. Grade Spec No. Grade Spec No. Grade Spec No. Grade
A297 HK BS3100 310C40 SEW 595 1.4848 EN 10295 GX40NiCrSi25 20
A297 HI BS3100 310C45
A297 HD BS3100 302C35 DIN 17465 1.4823
A297 HP BS3100 331C60 DIN 17465 1.4857
A297 HT BS3100 330C11
A297 HU BS3100 331C40
A297 HH BS3100 309C30
Low and high alloy steels
Quenched and tempered steels with excellent toughness at low temperatures. Used in high-strength applications
including trains, off-highway vehicles, and power generation.
US UK German EN
Spec No. Grade Spec No. Grade Spec No. Grade Spec No. Grade
ASTM A217 C5 BS3100 B5
ASTM A217 C12 BS3100 B6
ASTM A217 C12A BS3100 B6 SEW 595 1.7389
ASTM A217 WC1 BS3100 B1 DIN 17245 1.5419
ASTM A217 WC6 BS3100 B2 DIN 17245 1.7357 EN 10213 G17CrMo5-5
ASTM A217 WC9 BS3100 B3 DIN 17245 1.738 EN 10213 G17CrMo9-10
BS3100 B4
ASTM A352 LC1 BS3100 B1
ASTM A352 LC2
ASTM A352 LC3 BS3100 BL2 SEW 685 1.5638
ASTM A148 90-60 BS3100 BT1
ASTM A148 105-85 BS3100 BT2
ASTM A148 150-135 BS3100 BT3
ASTM A487 2B
ASTM A487 4A
ASTM A487 4B
ASTM A487 4C
ASTM A487 4D
ASTM A487 10B
BS3100 BW2
BS3100 BW3
BS3100 BW4
Manganese steel
A work-hardening steel for applications where excellent wear resistance is required such as mining, earthmoving
and steel processing.
US UK German EN
Spec No. Grade Spec No. Grade Spec No. Grade Spec No. Grade
ASTM A128 A BS3100 BW10 DIN 17145 1.3802
Carbon manganese steels
General engineering steels with good weldability for use in mechanical and structural applications.
US UK German EN
Spec No. Grade Spec No. Grade Spec No. Grade Spec No. Grade
BS3100 AM1 DIN 1681 1.0420
ASTM A216 WCA BS3100 AM2 DIN 1681 1.0446 EN 10213 GP240GH
ASTM A216 WCB BS3100 A1 DIN 17245 1.0619
ASTM A216 WCC BS3100 A2 DIN 1681 1.0446 EN 10293 GS240
ASTM A148 80-40 BS3100 A3 DIN 1681 1.0552
ASTM A148 80-50 BS3100 A4 SEW 510 1.6220 EN 10213 G20Mn5
ASTM A148 90-60 BS3100 A5
BS3100 A6
BS3100 AW2
BS3100 AW3 DIN 1681 1.0558
ASTM A352 LCB BS3100 AL1
ASTM A352 LCC BS3100 AL2
ASTM A352 LCC BS3100 AL3
ACCREDITATIONS AND APPROVALS
ISO9001
ISO14001
ISO45001
NORSOK M650 Ed. 4 for ASTM A995 grades 4A, 5A, 6A
EU Pressure Equipment Directive 97/23/EC
EN10340 for structural steel castings
Q1(N) for naval steel castings
DEFSTAN 95-25 for armoured steel castings
DNV GL offshore standards
American Bureau of Shipping
Lloyds Register of Shipping
Nickel based Alloys
Nickel based alloys are characterized by high toughness, and good resistance to oxidation and corrosion.
Alloying additions to the base nickel content creates grades that vary in the relative range of the these characteristics,
which imparting good mechanical strength and high temperature properties.
For the manufacture of these grades, voestalpine companies worldwide are known as the world leader in melting and
remelting technology. Our 120-years of experience plus our metallurgy know-how and a focus on the development and
production of high performance materials have meant we have become one of the most innovative producers of special
steel in the world. Our company boasts the most modern vacuum induction melting (VIM) and vacuum arc remelting
units (VAR) plus pressurized electroslag remelting units (PESR).
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
Alloy 800 (H, HT, HP) H500 1.4876, 1.4959, 1.4958 N08810, N08811 X10NiCrAlTi32-21 – B408, B564 –
A286 T200 1.4943, 1.4944, 1.4980, 1.2779, 1.3980 S66286 X4NiCrTi25-15, X5NiCrTi26-15 5731, 5732 A660 AISI: 660
Alloy 201 – 2.4068 N02201 LC-Ni99 – – –
Alloy 400 VRC400 2.4360 N04400 NiCu30Fe – B164, B564 –
Alloy K500 – 2.4375 N05500 NiCu30AI – – –
Alloy C22 L022 2.4602 N06022 NiCr21Mo14W – – –
Alloy 59 L359 2.4605 N06059 NiCr23Mo16AI – – –
Alloy C4 L004 2.4610 N06455 NiMo16Cr16Ti – – –
Alloy B2 – 2.4617 N10665 NiMo28 – – –
Alloy G3 L003 2.4619 N06985 NiCr22Mo7Cu – – –
Alloy 602CA – 2.4633 N06025 NiCr25FeALY – – –
Alloy 105 – 2.4634 N13021 NiCo20Cr15MoAITi – – –
Alloy 690 L690 2.4642 N60690 NiCr29Fe
Alloy C263 – 2.4650 N07263 NiCo20Cr20MoTi – – –
Waspaloy L303 2.4654 N7001 NiCr20Co13Mo4Ti3Al 5704, 5706, 5707, 5708, 5709
Alloy 20 – 2.4660 N08020 NiCr20CuMo – – –
Alloy 901 L901 2.4662 N09901 NiCr13Mo6Ti3 5660, 5661 – –
Alloy 617 VAT617 2.4663a N06617 NiCr23Co12Mo – B166 –
Alloy X LHX 2.4665 N06002 NiCr22Fe18Mo – – –
Alloy 718 (API) L718API 2.4668 N07718 NiCr19NbMo/NiCr19Fe19Nb5Mo3 – – Nace MR0175 (150ksi)
Alloy 718 (AMS) L718 AMS 2.4668 N07718 NiCr19NbMo/NiCr19Fe19Nb5Mo3 5662, 5663 B637 –
Alloy 725 L725 – N07725 NiCr21Mo8NbTiAl – B637, B805 –
Alloy X750 L750, VATX750 2.4669 N07750 NiCr15Fe7TiAI – B637 –
Alloy 600 – 2.4816 N06600 NiCr15Fe – – –
Alloy C276 L276 2.4819 N10276 NiMo16Cr15W – – –
Alloy 601 – 2.4851 N06601 NiCr23Fe – – –
Alloy 925 L925 2.4852 N09925 NiCr21Mo3TiAl – – –
Alloy 625 L625 2.4856 N06625 NiCr22Mo9Nb 5666 B446-03 G1 –
Alloy 825 L314, VRC825 2.4858 N08825 NiCr21Mo – – –
Alloy 75 – 2.4951, 2.4630 N06075 NiCr20Ti – – –
Alloy 80A L080 2.4952, 2.4631 N07080 NiCr20TiAL – – –
Alloy L605 – 2.4964 R30605 CoCr20W15Ni – – –
Alloy 90 – 2.4969, 2.4632 N07090 NiCr20Co18Ti – – –
Alloy 41 – 2.4973 N07041 NiCr19CoMo9TiAl – – –
MP35N L035 R30035 CoNi35Cr20Mo
Duplex and Super Duplex Steels
The properties of duplex stainless steels are achieved with overall lower alloy content than similar-performing super-austenitic grades,
making their use cost-effective for many applications. Duplex grades are characterized into groups based on their alloy content and corrosion resistance.
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
Super Duplex A913 1.4410 S32750 X2CrNiMoN25-7-4 – – F53
Duplex A903 1.4462 S31803, S32205 X2CrNiMoN22-5-3 – – F51, STN: 17 381
Super Duplex A911 1.4501 S32760 X2CrNiMoCuWN25-7-4 – – F55
Ferralium 255 A923 1.4507 S32550 X2CrNiMoCuN25-6-3 F61, F255
Martensitic Stainless Steels
Stainless alloys are divided into four basic groups: martensitic stainless steels, ferritic stainless steels, austenitic stainless steels, and precipitation hardening stainless steels.
When nickel is added, for instance, the austenite structure of iron is stabilized. This crystal structure makes such steels virtually non-magnetic
and less brittle at low temperatures. For greater hardness and strength, more carbon is added, and these grades are defined as ferritic or martensitic alloys.
The ferritic types achieve moderate increases in strength by cold working. The martensitic types become martensitic during heat treatment and achieve excellent strength.
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
– N685 1.2361, 1.4112 S44003 X91CrMoV18
440C N695 1.3544, 1.4125 S44004 X102CrMo17 5618, 5630
52100 R100 1.3505 100Cr6 6444
M50 R250 1.3551 80MoCrV42-16 6491
M50Nil R350 ~13MoCrNiV42-16-14 6278
– V416 1.4005 S41600 X12CrS13 5610L A582 AISI: 416
– VC140 1.4006 S41000 X12Cr13 – A276, A182 AISI: 410
403 N100 1.4006 X12Cr13 403
13Cr VC150 1.4021 S42000 X20Cr13 – A276 AISI: 420
420 N320 1.4021 X20Cr13 420
431 N352 1.4044, 1.4057 X17CrNi16-2 431
X30 N360 1.4108 S42027 X30CrMoN15-1 5898A A756, F899
F6NM N400, N403 1.4313 S41500 X3CrNiMo 13-4 – A182 AISI: F6NM
Super 13Cr – 1.4415 S41425, S41427 X2CrNiMoV13-5-2 – A182 –
– N404 1.4418 – X4CrNiMo 16-5-1 – – –
– N690 1.4528 X105CrCoMo18-2
9Cr1Mo – 1.7385 K90941 12CrMo9-1 – – –
Austenitic and Super Austenitic Stainless Steels
Austenitic stainless steel is one of the five classes of stainless steel by crystalline structure (along with ferritic, martensitic, duplex and precipitation hardened). Its primary crystalline structure is austenite (face-centered cubic). These steels usually cannot be hardened by heat treatment and are non-magnetic. This structure is achieved by adding enough austenite stabilizing elements such as nickel, manganese and nitrogen.
Like the austenitic stainless steels, the super austenitic stainless steels are also very ductile; they have excellent toughness, high strength, excellent corrosion resistance, good weldability and excellent formability. The super austenitic stainless steels are generally used where higher corrosion resistance, especially protection against chloride pitting and crevice corrosion, is required. Super austenitic stainless steels are defined as austenitic iron-based alloys with a PREN value greater than 40.
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
304 A500 1.4301 S30400 X5CrNi18-10 – A182 AISI: 304
304L A607 1.4307 S30403 X2CrNi18-9 – A182 AISI: 304L
316 A120 1.4401 S31600 X5CrNiMo17-12-2 – A182 AISI: 316
316L A200 1.4404 S31600 X2CrNiMo17-12-2 – A182 AISI: 316L
316L A220 1.4435 S31603 X2CrNiMo18-14-3 – – AISI: 316LUG, STN: 17 350
317L A102 1.4449 S31703 X3CrNiMo18-12-3 – A182 AISI: 317L
310 Urea A405 1.4466 S31050 X1CrNiMoN25-22-2 – – AISI: 310 MoLN
321 A700 1.4541 S32100 X6CrNiTi18-10 – A182 AISI: 321
347 A750 1.4546, 1.4550 N07090 X6CrNiNb18-10 5512, 5646 AISI: 347
– P558 1.3808 S29225 X20CrMnMoN17-11-3
Alloy 50 P511 Nitronic 50 S20910 X3CrNiMnMo22-13-3-2 – A182, A276, A479 AISI: XM 19
U-Boot Stahl 1.3964 P501 1.3964 X2CrNiMnMoNNb21-16-5-3
U-Boot Stahl 1.3974 P503 1.3974 X2CrNiMnMoNNb23-17-6-3
316LN/ U-Boot Stahl 1.3952 P510 1.4429 X2CrNiMoN17-13-3 316LN
Alloy 904L A962RC 1.4539 N08904 X1NiCrMoCu25-20-5 – A182 –
254SMO A965SA 1.4547 S31254 X1CrNiMoCuN20-18-7 – – AISI: F44
Alloy 926, Alloy 6XN A970 1.4529 N08926 X1CrNiMoCuN20-18-7 – – –
Alloy 24 P500 1.4565 X2CrNiMnMoN25-18-6-5 Alloy 24
Alloy 31 A952 1.4562 N08031 X1NiCrMoCu32-28-7 – B564, B649 –
Alloy 60 P513 – Nitronic 60 S21800 X10CrNiMn17-8-8 – A276, A314, A479, A484 –
Heat and Creep Resistant Steels
Viewing the microstructure respectively the chemical analysis the heat-resistant steels can be divided in the group of ferritic, martensitic, austenitic steels and nickel alloys.
Such steels are generally used in applications where resistance to increased temperatures are critical. These steels are hard wearing and offer a resistance to large variations in temperature. Industrial applications include furnaces, heat exchanges and incinerators where temperatures can reach up to 1100°C.
Characteristics include corrosive resistance, creep resistance, oxidation resistance and hydrogen brittleness – all under extremely high temperatures.
Creep resistant steels are steels designed to withstand a constant load at high temperatures.
The most important application of creep resistant steels is components of steam power plants operating at elevated temperatures (boilers, turbines, steam lines).
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
403 T655 1.4006 X12Cr13 403
403Cb T656 12%Cr 403Cb
420 T651 1.4021 X20Cr13 420
T602 1.4120, ~ 1.4921 X19CrMo12-1
Alloy FV520, 520B T670 1.4594 S45000 X5CrNiMoCuNb14-5 – – –
Alloy 450 T671SA, T671SB 1.4594 S45000 X5CrNiMoCuNb14-5 ~XM25
– H500 1.4876 – X10NiCrAlTi 32-21 – B564 –
COST E T505SC 1.4906 X12CrMoWVNbN10-1-1
T560 1.4913 X19CrMoNbVN11-1 ~BS: S150
T550 1.4922, 1.4923, 1.4926, 1.4934 X20CrMoV12-1, X22CrMoV12-1, X21CrMoV12-1 STN: 17 134
Jethete M152 T552 1.4933, 1.4938, 1.4939 S64152 X12CrNiMo12 5719 BS: S151
422 T504 ~1.4935 12%Cr 422, 661
A286 T200 1.4943, 1.4944, 1.4980, 1.2779, 1.3980 S66286 X4NiCrTi25-15, X5NiCrTi26-15 5731, 5732 A660 AISI: 660
– T240 1.4962 X12CrNiWTi16-13
– T262 1.4986 X8CrNiMoBNb16-16
314 H525 1.4841 S31400 X15CrNiSi25-20 AISI 314
Alloy 800 (H, HT, HP) H500 1.4876, 1.4959, 1.4958 N08810, N08811 X10NiCrAlTi32-21 – B408, B564 –
Precipitation Hardening Steels
Precipitation hardening alloys of the 17-4 PH and 15-5 PH types achieve their strength by dissolving precipitates by solution annealing. An aging cycle then creates precipitates that strengthen the steel. They are usually characterized by extremely good corrosion resistance.
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
17-4 PH N700 1.4542, 1.4548 S17400 X5CrNiCuNb16-4 5622, 5643 A564, F899 AISI: 630
15-5 PH N701 1.4545 S15500 X5CrNiCu15-5 5659 – AISI: XM 12
13-8 Mo N709 1.4534 – X3CrNiMoAl13-8-2 5629 A564 –
Alloy 455 N713 1.4543 S45500 X3CrNiCuTiNb12-9 Alloy 455, XM16
Maraging 300 V300 1.6354, ~1.2709 K93160 X2NiCoMo18-9-5 6514
Maraging 250 V250 1.6359, ~1.2706 K92890 X2NiCoMo18-8-5 6512
Maraging 350 V350 1.6356 X2NiCoMoTi18-12 6515
Alloy 465 N765 1.4614 Custom 465 S46500 X1CrNiTiMo11-11, X2CrNiTi12-11 5936 A564, F899
A286 T200 1.4943, 1.4944, 1.4980, 1.2779, 1.3980 S66286 X4NiCrTi25-15, X5NiCrTi26-15 5731, 5732 A660 AISI: 660
Alloy 718 (API) L718API 2.4668 N07718 NiCr19NbMo/NiCr19Fe19Nb5Mo2 – – Nace MR0175 (150ksi)
Alloy 718 (AMS) L718 AMS 2.4668 N07718 NiCr19NbMo/NiCr19Fe19Nb5Mo3 5662, 5663 B637 –
Copper Bearing Bronze
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
BeCu – – C17200 – – B196, B251, B643 –
NiAl Bronze – – C63000 – – B150 –
Toughmet 3 – – C72900 – – B505 –
Engineering Steels
Engineering steels are basically wrought steels intended for mechanical engineering and related technical applications. These require critical and often stringent levels of elasticity, strength, ductility, toughness and fatigue resistance. In some cases, resistance to high or low temperatures, expansion, corrosive and other aggressive environments may also be required.
Each material is carefully tailored to meet specific user requirements for properties and performance, and in some cases, to facilitate manufacturing and fabrication techniques. These techniques are then used to manufacture components or parts. The composition, process flow and heat treatment parameters are carefully selected to meet customer needs.
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
300M V132 41SiNiCrMoV7-6 6257, 6414; 6419
300MSi V180 40SiNiCrMoV10-6 6499
30CND8 V145 1.6604, 1.6580 G43400 30CrNiMo8 6484D
9310 E105 1.6657 G93106 14NiCrMo13-4 6265
LW1.6722 E108 LW1.6722 BS:S82
– V118 1.6745 40NiMoCr10-5 BS:S99
4330 (MOD) 4330 (MOD) 1.6932 – 28NiCrMoV8-5 – A646 –
4340 V124SC 1.6944 G43400 ˜40NiCrMo6 6414, 6484 E10
– V129SA 1.6952 24NiCrMoV14-6
F22 F22 1.7380 K21590 10CrMo9-10 – A182 –
15CDV6 V354 1.7734, 1.7735, 1.7736 (ESU) 14CrMoV6-9
E32CDV13 V361 ~1.7765 33CrMoV12 6481
E40CDV12 V358 1.8523 39CrMoV13-9
Steels with special physical properties
This material group shows special physical properties such as thermal expansion, permeability, relaxation, heat transfer, electric resistance or density.
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
– N114 13%Cr
Ni36, P802 1.3912 Invar K93600 Ni36 B753, F1684
– P800 FeCo17Cr1
Titanium
Titanium and titanium alloys are suitable for several applications. They offer good corrosion and erosion resistance, high strength, extreme mechanical and thermal stress resistance and good biocompatibility at low density.
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
Titan Grade 1 3.7024 R50250 WL 3.7024-1, BS TA 1, SAE AMS 4940 B265/ B348
Titan Grade 2 3.7034 R50400 WL 3.7034
Titan Grade 2 3.7035 R50400 B265/ B348
Titan Grade 3 3.7055 R50400 B265/ B348
Titan Grade 4 3.7064 R50700 WL 3.7064
Titan Grade 4 3.7065 R50700 B265/ B348
Titan Grade 12 3.7105 R53400
Ti AI5Sn2 3.7114 R54520
Ti Cu 2 3.7124
Ti 6-2-4-2 3.7144 R54620
Ti AI6Zr5 3.7154
Ti AI6V4 3.7164 R56400 ASTM F 1472, BS 7252-3, ISO 5832-3 WL 3.7164
Ti AI6V6Sn2 3.7174
Ti AI4 Mo4Sn2 3.7184
Ti 5AI-2,5V 3.7194 R56320
Titan Grade 11 3.7225 R52250
Titan Grade 7 / Pd 3.7235 R52400 ASTM B-/ASME SB-265 &348, DIN 17860, VdTÜV data sheet 230
Ti 6Al7Nb R56700
Other Materials
Alloy BÖHLER brand WstNo. UNS ISO AMS ASTM Others
Zirconium 99,5 2.2068 R60001
Zirconium Grade 701 2.2068 R60701
Zirconium Grade 702 2.2068 R60702
Zirconium Grade 704 2.2068 R60704
Zirconium Grade 705 2.3894 R60705
Zircaloy 2 1.8780 R60802
Zircaloy 4 1.8780 R60804
ZrNb 2,5 2.0241 R60901
Tantalum
Tungsten
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, BS EN 9001, BS EN 9100, AS 9100D, IATF 16949, NADCAP Certified, CE Marked,
European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019,
API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified & Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register),
GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA,
IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com