Manufacture of SAE Grades Materials And Products

Manufacture of SAE Grades Materials And Products

Manufacturer of SAE Grade Material And Product
AMS5640T Steel, Corrosion-Resistant, Bars, Wire, And Forgings 18Cr – 9.0Ni Free Machining
Aerospace Historical
2003-07-14
AMS5663L Nickel Alloy, Corrosion And Heat-Resistant, Bars, Forgings, And Rings 52.5Ni – 19Cr – 3.0Mo – 5.1Cb – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Or Vacuum Induction Melted 1775 °F (968 °C) Solution And Precipitation Heat Treated
Aerospace Historical
2003-07-14
AS5382 Aerospace Cable, Fiber Optic
Aerospace Historical
2003-07-10
AS5382/1 CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 Μm GRADED INDEX, HERMETIC COATED, TIGHT BUFFER
Aerospace Historical
2003-07-10
J902_200307 Passenger Car Windshield Defrosting Systems
Automotive Historical
2003-07-09
J2378_200307 Test Procedure For Trailer Air Reservoir Fill And Parking Brake Release Times
Commercial Historical
2003-07-07
AIR5455 Impact Of Changes In Test Dust Contaminants And Particle Counter Calibration On Laboratory Filter Element Performance And Fluid Cleanliness Classes
Aerospace Historical
2003-07-03
ARP5996A Evaluation Of Coking Propensity Of Aviation Lubricants Using The Hot Liquid Process Simulator (HLPS) Single Phase Flow Technique
Aerospace Historical
2003-07-03
AMS4919E Titanium Alloy Sheet, Strip, And Plate 6Al – 2Sn – 4Zr – 2Mo – 0.08Si Duplex Annealed
Aerospace Historical
2003-07-01
AMS2515E Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 To 400 °C (698 To 752 °F) Fusion
Aerospace Historical
2003-06-24
AS5116B Minimum Operational Performance Specification For Ground Ice Detection Systems
Aerospace Historical
2003-06-24
J1846_200306 Characterizing A Test Surface For Motorcycle Side Stand Retraction Performance Testing
Commercial Historical
2003-06-24
AMS3573B Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 To 90
Aerospace Historical
2003-06-24
AMS2516D Polytetrafluoroethylene (PTFE) Resin Coating High Build, 370 To 400 °C (698 To 752 °F) Fusion
Aerospace Historical
2003-06-24
AMSH81200A Heat Treatment Of Titanium And Titanium Alloys
Aerospace Historical
2003-06-24
AS8791A Hydraulic And Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin
Aerospace Historical
2003-06-24
J131_200306 Motorcycle Turn Signal Lamps
Commercial Historical
2003-06-24
AS85049/51A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, 90°, SELF-LOCKING AND NON-SELF-LOCKING CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/124 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS
Aerospace Historical
2003-06-20
AS85049/38A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/57A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/127 CONNECTOR ACCESSORIES, ELECTRICAL, BUSHING STRIP CATEGORY 7 (FOR USE WITH SAE AS85049/118, /120, /121, /123, /124, /126)
Aerospace Historical
2003-06-20
AS85049/47A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/31A CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-C-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/118 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, NON-SELF-LOCKING, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-C-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/55A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON-ENVIRONMENTAL, 90°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-5015 CRIMP, MIL-C-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/39A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/43A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON-ENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, 45°, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-C-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/27A CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/49A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4B (MIL-DTL-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/123 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90° SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/121 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS
Aerospace Historical
2003-06-20
AS85049/63A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/52A CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, STRAIGHT, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
Aerospace Historical
2003-06-20
AS85049/126 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90° SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS
Aerospace Historical
2003-06-20
AS85049/128 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, SHIELD BAND, CAGEGORY 7 (FOR AS85049/82 – /90, /93, /109 – /117 ACCESSORIES)
Aerospace Historical
2003-06-20
AS85049A Connector Accessories, Electrical General Specification For
Aerospace Historical
2003-06-20
J1911_200306 Test Procedure For Air Reservoir Capacity–Highway Type Vehicles
Commercial Historical
2003-06-18
AS7108B Nadcap AUDIT CRITERIA FOR CHEMICAL PROCESSING
Aerospace Historical
2003-06-18
J214_200306 HYDRAULIC CYLINDER TEST PROCEDURE
Commercial Current
2003-06-18
J1388_200306 Personnel Protection – Skid Steer Loaders
Commercial Historical
2003-06-18
J2023_200306 Operating Precautions For Horizontal Earthboring Machines
Automotive Current
2003-06-17
J2103_200306 Acoustics–Measurement Of Airborne Noise Emitted By Earthmoving Machinery–Operator’s Position–Stationary Testing Condition
Automotive
2003-06-17
J821_200306 Electrical Wiring Systems For Construction, Agricultural, And Off-Road Machines
Commercial Current
2003-06-17
J2270_200306 Ship Systems And Equipment—Threaded Fasteners—Inspection, Test, And Installation Requirements
Commercial Historical
2003-06-16
J551/13_200306 Vehicle Electromagnetic Immunity – Bulk Current Injection
Automotive Historical
2003-06-16
AMS6488G Steel, Bars And Forgings 5.0Cr – 1.3Mo – 0.5V – (0.38 – 0.43C)
Aerospace Historical
2003-06-16
AMS4966M Titanium Alloy, Forgings 5Al – 2.5Sn Annealed, 110 Ksi (758 MPa) Yield Strength
Aerospace Historical
2003-06-16
AMS6385F Steel Sheet, Strip, And Plate, Low Alloy, Heat Resistant 0.65Si – 1.25Cr – 0.50Mo – 0.25V (0.27 – 0.33C)
Aerospace Historical
2003-06-16
AMS5060H Steel, Bars, Forgings, And Tubing 0.13 – 0.18C (SAE 1015)
Aerospace Historical
2003-06-16
AMS2466A Hard Anodic Coating Of Magnesium Alloys Alkaline Type, High Voltage
Aerospace Historical
2003-06-16
AMS4915H Titanium Alloy Sheet, Strip, And Plate 8Al – 1V – 1Mo Single Annealed
Aerospace Historical
2003-06-16
AMS6481A Steel Bars, Forgings, And Tubing, Nitriding 3Cr – 1Mo – 0.2V – (0.29 – 0.36C) Premium Aircraft-Quality For Bearing Applications Double Vacuum Melted
Aerospace Historical
2003-06-16
AMS4979E Titanium Alloy, Bars, Wire, Forgings, And Rings 6Al – 6V – 2Sn Solution And Precipitation Heat Treated
Aerospace Historical
2003-06-16
J1382_200306 Classification, Nomenclature, And Specification Definitionsfor Trenching Machines
Commercial Current
2003-06-16
AMS6414J Steel, Bars, Forgings, And Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted
Aerospace Historical
2003-06-16
AMS4976F Titanium Alloy, Forgings 6.0Al – 2.0Sn – 4.0Zr – 2.0Mo Solution And Precipitation Heat Treated
Aerospace Historical
2003-06-16
AMS6514E Steel, Maraging, Bars, Forgings, Tubing, And Rings 18.5Ni – 9.0Co – 4.9Mo – 0.65Ti – 0.10Al Consumable Electrode Vacuum Melted, Annealed
Aerospace Historical
2003-06-16
AMS6415R Steel, Bars, Forgings, And Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340)
Aerospace Historical
2003-06-16
AS21908B ELBOW, BULKHEAD UNIVERSAL 90°, FLARELESS TUBE
Aerospace Historical
2003-06-13
AS21922A SLEEVE, COUPLING, FLARELESS
Aerospace Historical
2003-06-13
J1965_200306 Road VehiclesÑWheels For Commercial Vehicles And Multipurpose Passenger VehiclesÑFixing NutsÑTest Methods
Commercial Historical
2003-06-13
AS21916B REDUCER, EXTERNAL THREAD, FLARELESS TUBE
Aerospace Historical
2003-06-13
J1704_200306 Borate Ester Based Brake Fluids
Automotive Historical
2003-06-12
J1703_200306 Motor Vehicle Brake Fluid
Automotive Historical
2003-06-12
J2522_200306 Dynamometer Global Brake Effectiveness
Automotive Historical
2003-06-11
J2505_200306 Measurement Of Vehicle-Roadway Frictional Drag
Automotive Historical
2003-06-10
ARINC716-11 AIRBORNE VHF COMMUNICATIONS TRANSCEIVER
Aerospace Current
2003-06-10
J1401_200306 Road Vehicle–Hydraulic Brake Hose Assemblies For Use With Nonpetroleum-Base Hydraulic Fluids
Automotive Historical
2003-06-10
J987_200306 Lattice Boom Cranes Method Of Test
Commercial Historical
2003-06-10
AIR5532 Generic Aircraft-Store Interface Framework (GASIF)
Aerospace Historical
2003-06-06
AS9401A BOLT, TEE HEAD – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .4375-20 UNJF-3A
Aerospace Historical
2003-06-05
AS126275A STUD – STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3125 – 18 NS X .3125 – 24 UNF-3A
Aerospace Historical
2003-06-05
J189_200306 Power Steering Return Hose – Low Pressure
Automotive Historical
2003-06-05
J188_200306 Power Steering Pressure Hose High Volumetric Expansion Type
Automotive Historical
2003-06-05
J191_200306 Power Steering Pressure Hose–Low Volumetric Expansion Type
Automotive Historical
2003-06-05
AMS2404E Plating, Electroless Nickel
Aerospace Historical
2003-06-05
USCAR18-2 Fakra Smb Rf Connector Supplement
Automotive Historical
2003-06-04
AMS4981D Titanium Alloy Bars, Wire, And Forgings 6.0Al – 2.0Sn – 4.0Zr – 6.0Mo Solution And Precipitation Heat Treated
Aerospace Historical
2003-06-04
AMS6424D Steel Bars, Forgings, And Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.49 – 0.55C)
Aerospace Historical
2003-06-03
AMS2370H Quality Assurance Sampling And Testing Carbon And Low-Alloy Steel Wrought Products And Forging Stock
Aerospace Historical
2003-06-03
J38_200306 Lift Arm Support Device For Loaders
Commercial Current
2003-06-03
AMS4998C Titanium Alloy Powder 6Al – 4V
Aerospace Historical
2003-06-03
AMS5667L Nickel Alloy, Corrosion And Heat-Resistant, Bars, Forgings, And Rings 72Ni – 15.5Cr – 0.95Cb – 2.5Ti – 0.70Al – 7.0Fe Equalized, Precipitation Hardenable
Aerospace Historical
2003-06-03
AMS5519M Steel, Corrosion Resistant, Sheet And Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 185 Ksi (1276 MPa) Tensile Strength
Aerospace Historical
2003-06-03
AMS5524K Steel, Corrosion And Heat-Resistant, Sheet, Strip And Plate 18Cr – 13Ni – 2.5Mo (SAE 30316) Solution Heat Treated
Aerospace Historical
2003-06-03
AMS2642B Structural Examination Of Titanium Alloys Etch-Anodize Inspection Procedure
Aerospace Historical
2003-06-03
J2521_200306 Disc Brake Dynamometer Squeal Noise Matrix
Automotive Historical
2003-06-03
AMS2371G Quality Assurance Sampling And Testing Corrosion And Heat-Resistant Steels And Alloys Wrought Products And Forging Stock
Aerospace Historical
2003-06-03
AMS2424E Plating, Nickel Low-Stressed Deposit
Aerospace Historical
2003-06-03
AMS5518K Steel, Corrosion Resistant, Sheet And Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength
Aerospace Historical
2003-06-03
ARP9113 Supply Chain Risk Management Guideline
Aerospace Historical
2003-06-01
AS54471-3 AS54471 Nut, Self Locking, Shank, Flange Restrained, 0.2500-28 UNJF-3B ISO3161. Based On AS44751 With 2g, 5g, 12g And 18g Of Additional Mass
Aerospace Current
2003-06-01
AS63850-2 AS63850-864 Sealing Ring
Aerospace Current
2003-06-01
J1579_200305 Motorcycle Side Stand Retraction Performance Requirements
Commercial Historical
2003-05-30
J1518_200305 Hree Point Hitch (Type A) Backhoe Personnel Protection
Automotive Historical
2003-05-30
J1446_200305 On-Machine Alarm Test And Evaluation Procedure For Construction And General Purpose Industrial Machinery
Commercial Current
2003-05-30
J1942/1_200305 Qualified Hoses For Marine Applications
Automotive Historical
2003-05-30
J185_200305 Access Systems For Off-Road Machines
Commercial Historical
2003-05-30
J833_200305 Human Physical Dimensions
Commercial Current
2003-05-29
J99_200305 Lighting And Marking Of Industrial Equipment On Highways
Commercial Historical
2003-05-28
J2624_200305 Draft Comprehensive Lining Evaluation–Vehicle
Automotive Historical
2003-05-28
J551/17_200305 Vehicle Electromagnetic Immunity – Power Line Magnetic Fields
Automotive Historical
2003-05-28
J860_200305 Test Method For Measuring Mass (Weight) Of Organic Trim Materials
Automotive Historical
2003-05-28
ARP5284A TLTV – Aircraft NLG Steering And Tractive Force Protection Systems Or Alerting Devices – Inspection, Maintenance And Calibration Requirements
Aerospace Historical
2003-05-27
ARP5285A Towbarless Towing Vehicle Operating Procedure
Aerospace Historical
2003-05-27
AS28913B BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE II
Aerospace Historical
2003-05-23
AS28914B BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE III
Aerospace Historical
2003-05-23
AS21431A BEARING, ROLLER, SELF-ALIGNING SINGLE ROW ANTI-FRICTION, SEALED -65 TO 350 °F, TYPE I
Aerospace Historical
2003-05-23
AS5900A Standard Test Method For Aerodynamic Acceptance Of SAE AMS 1424 And SAE AMS 1428 Aircraft Deicing/Anti-Icing Fluids
Aerospace Historical
2003-05-23
J1790_200305 Self-Propelled Sweepers And Scrubbers Steering Requirements Single-Circuit Hydraulic Servo-Assisted Systems
Commercial Historical
2003-05-22
ARP5482 Photometric Data Acquisition Procedures For Impact Test
Aerospace Historical
2003-05-21
ARP5061 Guidelines For Testing And Support Of Aerospace, Fiber Optic, Inter-Connect Systems
Aerospace Historical
2003-05-21
J115_200305 Safety Signs
Commercial Historical
2003-05-20
J1150_200305 Terminology For Agricultural Equipment
Commercial Current
2003-05-20
J2042_200305 Clearance, Sidemarker, And Identification Lamps For Use On Motor Vehicles 2032 Mm Or More In Overall Width
Automotive Historical
2003-05-19
J2518_200305 Lift Capacity Calculation Method Scrap And Material Handlers
Commercial Historical
2003-05-16
J369_200305 Flammability Of Polymeric Interior Materials–Horizontal Test Method
Automotive Historical
2003-05-16
J94_200305 Combination Tail And Floodlamp For Industrial Equipment
Commercial Current
2003-05-15
ARP1827A Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance
Aerospace Historical
2003-05-15
AIR5493A Requirements For Development, Implementation And Control Of Aerospace Auditor Training
Aerospace Historical
2003-05-15
AIR1268 RECOMMENDATIONS FOR SELECTION AND USE OF TORQUE WRENCHES FOR AEROSPACE PROPULSION SYSTEMS APPLICATIONS
Aerospace Current
2003-05-15
AMS6331B Steel, Welding Wire, 0.50Cr – 0.55Ni – 0.20Mo (0.33 0.38C) (SAE 8735) Vacuum Melted, Environment Controlled Packaging
Aerospace Current
2003-05-15
AMS3726/1C Shims, Filled Resin Compound, Liquid
Aerospace Current
2003-05-15
AMS6240C Steel, Carburizing 5ni (.08 – .13c)
Aerospace Current
2003-05-15
J708_200305 Agricultural Tractor Test Code
Commercial Current
2003-05-15
J716_200305 Application Of Hydraulic Remote Control To Agricultural Tractorsand Trailing Type Agricultural Implements
Commercial Current
2003-05-15
J209_200305 Instrument Face Design And Location For Construction And Industrial Equipment
Commercial Current
2003-05-13
J2393_200305 Swing Performance And Rating Procedure, Material Handlers,Knuckle Boom Log Loaders And Certain Forestry Equipment
Automotive Current
2003-05-13
J1092_200305 NomenclatureÑIndustrial Tractors (General Purpose Wheel)
Commercial Current
2003-05-13
J154_200305 Operator Space Envelope Dimensions For Off-Road Machines
Commercial Current
2003-05-13
J43_200305 Axle Application Load Rating For Industrial Wheel Loaders And Backhoe Loaders
Commercial Current
2003-05-13
J898_200305 Control Locations For Off-Road Work Machines
Automotive
2003-05-13
J1040_200305 Performance Criteria For Rollover Protective Structures (ROPS) For Construction, Earthmoving, Forestry, And Mining Machines
Commercial Current
2003-05-13
J897_200305 Machine Slope Operation Test Code
Commercial Current
2003-05-12
J957_200305 Capacity Rating–Elevating Scrapers
Commercial Current
2003-05-12
AMS3668C Polytetrafluoroethylene (PTFE) Moldings Premium Grade, As Sintered
Aerospace Historical
2003-05-09
J1295_200305 Identification Terminology And Specification Definitions–Pipelayers And Side Booms, Tractor Or Loader Mounted
Commercial Current
2003-05-08
J1234_200305 Specification Definitions–Off-Road Work Machines
Commercial Current
2003-05-08
J1265_200305 Capacity Rating–Dozer Blades
Commercial Current
2003-05-08
J872_200305 Drawbar Test Procedure For Construction, Forestry, And Industrial Machines
Automotive Current
2003-05-08
J874_200305 Earthmoving Machines–Method For Locating The Center Of Gravity
Commercial
2003-05-08
J17_200305 Latex Foam Rubbers
Automotive Historical
2003-05-08
J741_200305 Capacity Rating–Scraper, Open Bowl
Commercial Current
2003-05-08
J1363_200305 Capacity Rating–Dumper Body And Trailer Body
Commercial Current
2003-05-08
J1939/81_200305 NETWORK MANAGEMENT
Automotive Historical
2003-05-08
AMS4973E Titanium Alloy Forgings 8Al – 1Mo – 1V Solution Heat Treated And Stabilized
Aerospace Historical
2003-05-07
AMS5085F Steel Sheet, Strip, And Plate 0.47 – 0.55C (SAE 1050) Annealed
Aerospace Historical
2003-05-07
AMS5030H Steel, Welding Wire 0.06 Carbon, Maximum
Aerospace Historical
2003-05-07
AMS4933C Titanium Alloy Extrusions And Flash Welded Rings 8Al – 1Mo – 1V Solution Heat Treated And Stabilized
Aerospace Historical
2003-05-07
AMST9047 Titanium And Titanium Alloy, Bars (Rolled Or Forged) And Reforging Stock, Aircraft Quality
Aerospace Historical
2003-05-07
AMS4943G Titanium Alloy, Hydraulic, Seamless Tubing 3.0Al – 2.5V Annealed
Aerospace Historical
2003-05-07
AS4361 Minimum Performance Standards For Aerospace Electric Power Converters
Aerospace Historical
2003-05-05
AIR1269B Molded Rigid Plastic Parts
Aerospace Historical
2003-05-05
J1761_200304 Information Report On Its Terms And Definitions
Automotive Current
2003-05-05
J1763_200304 A Conceptual Its Architecture: An Atis Perspective
Automotive Current
2003-05-05
USCAR25 Electrical Connector Assembly Ergonomic Design Criteria
Automotive Historical
2003-05-03
AMS2491D Surface Treatment Of Polytetrafluoroethylene Preparation For Bonding
Aerospace Historical
2003-05-03
AMS2515D Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 To 400 °C (698 To 752 °F) Fusion
Aerospace Historical
2003-05-01
AMS3573A Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 To 90
Aerospace Historical
2003-05-01
AMS3579C Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 To 1 Shrink Ratio
Aerospace Historical
2003-05-01
AMS2516C Polytetrafluoroethylene (PTFE) Resin Coating High Build, 370 To 400 °C (698 To 752 °F) Fusion
Aerospace Historical
2003-05-01
AS1814B Terminology For Titanium Microstructures
Aerospace Historical
2003-04-30
AMS7882 Tungsten Carbide-Cobalt Chrome Powder Agglomerated And Sintered
Aerospace Historical
2003-04-30
AMS7881 Tungsten Carbide-Cobalt Powder Agglomerated And Sintered
Aerospace Historical
2003-04-30
AMS2759/9B Hydrogen Embrittlement Relief (Baking) Of Steel Parts
Aerospace Historical
2003-04-30
J225_200304 Brake Force Distribution Field Test Procedure For Truck And Bus
Commercial Current
2003-04-29
AMS4916G Titanium Alloy Sheet, Strip, And Plate 8A1 – 1Mo – 1V Duplex Annealed
Aerospace Historical
2003-04-29
AIR1402A Common Termination Method, Electrical Wiring System, Application Of
Aerospace Current
2003-04-28
ARP4191C Gas Turbine Engine Performance Presentation For Digital Computer Programs Using FORTRAN 77
Aerospace Historical
2003-04-28
J2599_200304 Fuel Filler Pipe Assembly Design Practice To Meet Low Evaporative Emission Requirements
Automotive Historical
2003-04-25
ARP592A Terminal, Taper Pin, Design And Application
Aerospace Current
2003-04-25
J1860_200304 Labeling Air Brake Valves With Their Performance (Input-Output) Characteristics
Commercial Historical
2003-04-25
J2554_200304 Engine Intake Air Water Separation Test Procedure
Automotive Historical
2003-04-25
J1802/1_200304 Test Component Specification
Commercial Historical
2003-04-25
J1474_200304 Heavy-Duty Nonmetallic Engine Cooling Fans Material, Manufacturing, And Test Considerations
Automotive Historical
2003-04-25
ARP5596 Cargo Shoring Guidelines
Aerospace Historical
2003-04-24
AMS3267/4B Sealing Compound, Low Adhesion, Corrosion Inhibiting, 9,000 To 14,000 Poises (900 To 1400 Pa⋅S), 2 Hour Application Time (B-2)
Aerospace Current
2003-04-24
AMS3267/2B Sealing Compound, Low Adhesion, Corrosion Inhibiting, 9,000 To 14,000 Poises (900 To 1400 Pa⋅S), 1/2 Hour Application Time (B-1/2)
Aerospace Current
2003-04-24
AMS3267/1A SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING 200 To 600 Poises (20 To 60 Pa·s), 1/2 Hour Application Time (A-1/2)
Aerospace Current
2003-04-24
J1390_200304 Engine Cooling Fan Structural Analysis
Commercial Historical
2003-04-24
J1463_200304 Pull-Type Clutch Transmission Installation Dimensions
Commercial Historical
2003-04-24
MAM2606B Pressure Testing, 485 Kpa
Aerospace Current
2003-04-24
MAM2607B Pressure Testing, 690 Kpa
Aerospace Current
2003-04-24
MAM2602B Pressure Testing, 170 Kpa
Aerospace Current
2003-04-24
MAM2601C Pressure Testing, Gaseous Media, 70 Kpa
Aerospace Current
2003-04-24
MAM2604C Pressure Testing, Gaseous Media, 275 Kpa
Aerospace Current
2003-04-24
MAM2605B Pressure Testing, 380 Kpa
Aerospace Current
2003-04-24
AMS5813C Steel Wire, Welding, Corrosion And Moderate Heat Resistant 15cr 7.1ni 2.4mo 1al
Aerospace Current
2003-04-24
J318_200304 Automotive Air Brake Line Couplers (Gladhands)
Automotive Historical
2003-04-24
J1341_200304 Test Method For Measuring Power Consumption Of Hydraulic Pumps For Trucks And Buses
Commercial Historical
2003-04-24
J1309_200304 Travel Performance And Rating Procedure, Crawler Mounted Hydraulic Excavators, Material Handlers, Knuckle Boom Log Loaders, And Certain Forestry Equipment
Commercial Historical
2003-04-24
J1857_200304 Flywheel Dimensions For Truck And Bus Applications
Commercial Historical
2003-04-23
J2622_200304 Battery Connections For 42 Volt Electrical Systems Tests And General Performance Requirements
Automotive Historical
2003-04-23
AMS2770G Heat Treatment Of Wrought Aluminum Alloy Parts
Aerospace Historical
2003-04-23
J1461_200304 Manual Slack Adjuster Test Procedure
Automotive Historical
2003-04-21
AS9012A Aerospace First Article Inspection Requirements
Aerospace Current
2003-04-17
AMS6387 Steel, Carbon, Laminated Sheet, Surface Bonded
Aerospace Historical
2003-04-17
AMS4988 Titanium Alloy Sheet, Strip, And Plate 6Al-6V-2Sn Solution Heat Treated
Aerospace Historical
2003-04-17
AMS4989 Titanium Alloy Sheet, Strip, And Plate 3Al-2.5V Solution Heat Treated
Aerospace Historical
2003-04-17
AMS4990 Titanium Alloy Sheet, Strip, And Plate 6Al-6V-2Sn Solution Heat Treated And Aged
Aerospace Historical
2003-04-17
AMS4940 Titanium Sheet, Strip, And Plate Commercially Pure Annealed, 25.0 Ksi (172 MPa) Yield Strength
Aerospace Historical
2003-04-17
AMS4904 Titanium Alloy Sheet, Strip, And Plate 6Al – 4V Solution Heat Treated And Aged
Aerospace Historical
2003-04-17
AMS4939 Titanium Alloy Sheet, Strip, And Plate 3Al – 8V – 6Cr – 4Mo – 4Zr Solution Heat Treated
Aerospace Historical
2003-04-17
J2426_200304 Occupant Restraint System Evaluation–Lateral Rollover System–Level Heavy Trucks
Commercial Historical
2003-04-16
J2424_200304 Free Motion Headform Impact Tests Of Heavy Truck Cab Interiors
Commercial Historical
2003-04-16
J662_200304 Brake Block Chamfer
Commercial Historical
2003-04-16
AMS7817B Molybdenum Alloy Sheet, Strip, And Plate, 0.48ti 0.090zr 0.02c, Arc Cast, Stress Relieved
Aerospace Current
2003-04-16
AMS6524E Steel, Sheet, Strip, And Plate 1.0cr 7.5ni 4.5co 1.0mo 0.09v (0.29-0.34c) Consumable Electrode Melted, Annealed
Aerospace Current
2003-04-16
AMSLP390A Plastic, Modling And Extrusion Material Polyethylene And Copolymers (Low, Medium, And High Density)
Aerospace Current
2003-04-16
AMS4959D Titanium Alloy Wire 13.5V – 11Cr – 3Al Spring Temper
Aerospace Historical
2003-04-16
AMS4919D Titanium Alloy Sheet, Strip, And Plate 6Al – 2Sn – 4Zr – 2Mo – 0.08Si Duplex Annealed
Aerospace Historical
2003-04-16
AMS4941D Titanium Tubing, Welded Annealed, 40 Ksi (276 MPa) Yield Strength
Aerospace Historical
2003-04-16
AMS2380E Approval And Control Of Premium-Quality Titanium Alloys
Aerospace Historical
2003-04-16
J1541_200304 Fuel Injection Nomenclature–Spark Ignition Engines
Automotive Historical
2003-04-11
J949_200304 Test Method For Determining Stiffness (Modulus Of Bending) Of Interior Trim Materials And Substrates
Automotive Historical
2003-04-11
J158_200304 Automotive Malleable Iron Castings
Automotive Current
2003-04-11
AMS3660C Polytetrafluoroethylene (PTFE) Moldings General Purpose Grade, As Sintered
Aerospace Historical
2003-04-03
AMS4903 Titanium Alloy Sheet, Strip, And Plate 6Al – 4V Solution Heat Treated
Aerospace Historical
2003-04-01
J2392_200303 Categorization And Properties Of SAE Cold Rolled Strip Steels
Automotive Historical
2003-03-31
J1091_200303 Earthmoving Machinery-Operator’s Field Of View
Commercial Historical
2003-03-30
ARP5595 Cargo Restraint Straps – Utilization Guidelines
Aerospace Historical
2003-03-27
ARP5364 Human Factor Considerations In The Design Of Multifunction Display Systems For Civil Aircraft
Aerospace Historical
2003-03-27
J2477_200303 Automotive Austempered Ductile (Nodular) Iron Castings (Adi)
Automotive Historical
2003-03-25
J2419_200303 Occupant Restraint System Evaluation—Frontal Impact System-Level Heavy Trucks
Commercial Historical
2003-03-25
J1948_200303 Cab Sleeper Occupant Restraint System Test
Automotive Historical
2003-03-25
ARP5483/3 Rolling Element Bearing Axial And Radial Internal Clearance
Aerospace Historical
2003-03-17
AS9101B Quality Management Systems Assessment
Aerospace Historical
2003-03-17
AS1624A Hose, Polytetrafluoroethylene (Tfe), Lightweight, 3,000 Psi, High Temperature, Hydraulic And Pneumatic
Aerospace Current
2003-03-14
AS1722A Hose, Polytetrafluoroethylene (Tfe), Lightweight, High Temperature And High Pressure (3000 Psig) With Integral Fire Protection
Aerospace Current
2003-03-14
ARP1395B Minimum Requirements For Future Wide-Body Aircraft Cargo Systems And Compartments (Intermodal)
Aerospace Current
2003-03-14
AMS4189F Aluminum Alloy, Welding Wire 4.1 Si – 0.20Mg (4643)
Aerospace Historical
2003-03-14
AMS4191G Aluminum Alloy, Welding Wire 6.3Cu – 0.30Mn – 0.18Zr – 0.15Ti – 0.10V (2319)
Aerospace Historical
2003-03-14
AMS5082F Steel Tubing, Seamless 0.31 – 0.38C (SAE 1035) Stress Relieved
Aerospace Historical
2003-03-14
AMS4246C Aluminum Alloy, Welding Wire 7.0Si – 0.52Mg (357)
Aerospace Historical
2003-03-14
AMS4917F Titanium Alloy Sheet, Strip, And Plate 13.5V – 11Cr – 3.0Al Solution Heat Treated
Aerospace Historical
2003-03-14
AMS4963A Titanium Alloy, Bars, Wire, Forgings, And Rings 6.0Al – 4.0V Annealed, Heat Treatable, Modified Strength
Aerospace Historical
2003-03-14
AMS4953D Titanium Alloy Welding Wire 5Al – 2.5Sn
Aerospace Historical
2003-03-14
AMS4970G Titanium Alloy Bars, Wire, And Forgings 7Al – 4Mo Solution And Precipitation Heat Treated
Aerospace Historical
2003-03-14
AMS4956D Titanium Alloy Welding Wire 6Al – 4V, Extra Low Interstitial Environment Controlled Packaging
Aerospace Historical
2003-03-14
AMS4245C Aluminum Alloy, Welding Wire 5.0Si – 1.2Cu – 0.50Mg (355)
Aerospace Historical
2003-03-14
AMS4954G Titanium Alloy, Welding Wire 6Al – 4V
Aerospace Historical
2003-03-14
AMS4957C Titanium Alloy, Round Bar And Wire 3Al – 8V – 6Cr – 4Mo – 4Zr Consumable Electrode Melted Solution Heat Treated And Cold Drawn
Aerospace Historical
2003-03-14
AMS4911J Titanium Alloy, Sheet, Strip, And Plate 6Al – 4V Annealed
Aerospace Historical
2003-03-14
MAM5598C Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 72ni 15.5cr 0.95(Cb + Ta) 2.5ti 0.70al 7.0fe Consumable Electrode Or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Current
2003-03-12
AS9006 Deliverable Aerospace Software Supplement For AS9100A Quality Management Systems – Aerospace – Requirements For Software (Based On AS9100A)
Aerospace Historical
2003-03-12
J1814_200303 Operator Controls–Off-Road Machines
Commercial Historical
2003-03-12
J232_200303 Industrial Rotary Mowers
Commercial Historical
2003-03-12
J1042_200303 Operator Protection For General-Purpose Industrial Machines
Commercial Historical
2003-03-12
MAM2231B Tolerances, Metric Carbon Steel Bars
Aerospace Historical
2003-03-12
MAM2232B Tolerances, Metric Carbon Steel, Sheet, Strip, And Plate
Aerospace Historical
2003-03-12
MAM2241D Tolerances, Metric Corrosion And Heat Resistant Steel, Iron Alloy, Titanium, And Titanium Alloy Bars And Wire
Aerospace Historical
2003-03-12
MAM2222C Tolerances, Metric Copper And Copper Alloy Sheet, Strip, And Plate
Aerospace Historical
2003-03-12
MAM2224C Tolerances, Metric Copper And Copper Alloy Wire
Aerospace Historical
2003-03-12
MAM2223C Tolerances, Metric Copper And Copper Alloy Seamless Tubing
Aerospace Historical
2003-03-12
MAM2251B Tolerances, Metric Low-Alloy Steel Bars
Aerospace Historical
2003-03-12
MAM2252B Tolerances, Metric Low-Alloy Steel Sheet, Strip, And Plate
Aerospace Historical
2003-03-12
MAM2253A Tolerances, Metric Carbon And Alloy Steel Tubing
Aerospace Historical
2003-03-12
MAM2261C Tolerances, Metric Nickel, Nickel Alloys, And Cobalt Alloy Bars, Rods, And Wire
Aerospace Historical
2003-03-12
MAM2242C Tolerances, Metric Corrosion And Heat Resistant Steel, Iron Alloy, Titanium, And Titanium Alloy Sheet, Strip, And Plate
Aerospace Historical
2003-03-12
MAM2243C Tolerances, Metric Corrosion And Heat Resistant Steel Tubing
Aerospace Historical
2003-03-12
MAM2244B Tolerances, Metric Titanium And Titanium Alloy Tubing
Aerospace Historical
2003-03-12
MAM2245B Tolerances, Metric Titanium And Titanium Alloy Extruded Bars, Rods, And Shapes
Aerospace Historical
2003-03-12
MAM2221C Tolerances, Metric Copper And Copper Alloy Bars And Rods
Aerospace Historical
2003-03-12
MAM2303D Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2003-03-12
MAM2304B Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2003-03-12
MAM2262C Tolerances, Metric Nickel, Nickel Alloy, And Cobalt Alloy Sheet, Strip, And Plate
Aerospace Historical
2003-03-12
MAM2263A Tolerances, Metric Nickel, Nickel Alloy, And Cobalt Alloy Tubing
Aerospace Historical
2003-03-12
MAM2300C Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2003-03-12
MAM2301B Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2003-03-12
MAM5706C Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode Or Vacuum Induction Melted, 995 To 1040°C Solution Heat Treated
Aerospace Current
2003-03-12
MAM6415C Steel, Bars, Forgings, And Tubing, 0.80cr 1.8ni 0.25mo (0.38 0.43)
Aerospace Current
2003-03-12
MAM6304B Low-Alloy Steel, Heat-Resistant, Bars, Forgings, And Tubing, 0.95cr 0.55mo 0.30v (0.40-0.50c)
Aerospace Current
2003-03-12
MAM5914A Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Foil 52.5ni 19cr 3.0mo 5.0cb 0.90ti 0.50al 18fe Consumable Electrode Or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated
Aerospace Current
2003-03-12
MAM4911B Titanium Alloy, Sheet, Strip, And Plate, 6al 4v, Annealed
Aerospace Current
2003-03-12
MAM4778D Nickel Alloy, Brazing Filler Metal, 92Ni 4.5Si 3.1B, 980 To 1040°C Solidus-Liquidus Range
Aerospace Current
2003-03-12
MAM5536B Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 47.5ni 22cr 1.5co 9.0mo 0.60w 18.5fe, Solution Heat Treated
Aerospace Current
2003-03-12
MAM5401B Nickel Alloy, Corrosion And Heat Resistant, Investment Castings 62ni 21.5cr 9.0mo 3.6cb Vacuum Melted, Vacuum Cast As Cast
Aerospace Current
2003-03-12
MAM4247B Aluminum Alloy, Hand Forgings 7.7zn 2.4mg 1.6cu 0.16cr (7049-T7352) Solution Heat Treated, Stress Relieved By Compression, And Precipitation Heat Treated
Aerospace Current
2003-03-12
MAM4209B Aluminum Alloy, Sheet, Alclad, 6.0cu 0.40zr, As Rolled
Aerospace Current
2003-03-12
MAM4427A Magnesium Alloy Sand Castings 4.0y 2.3nd 0.7zr Solution And Precipitation Heat Treated
Aerospace Current
2003-03-12
MAM4248B Aluminum Alloy, Hand Forgings And Rolled Rings 1.0mg 0.60si 0.28cu 0.20cr Solution Heat Treated, Stress Relieved By Compression, And Precipitation Heat Treated
Aerospace Current
2003-03-12
MAM4323B Aluminum Alloy, Hand Forgings, 5.6zn 2.5mg 1.6cu 0.23cr, Solution Heat Treated, Stress Relieved, And Precipitation Heat Treated
Aerospace Current
2003-03-12
MAM4141B Aluminum Alloy, Die Forgings, 5.6zn 2.5mg 1.6cu 0.23cr Solution And Precipitation Heat Treated
Aerospace Current
2003-03-12
MAM4208B Aluminum Alloy, Sheet, 6.0cu 0.40zr, As Rolled
Aerospace Current
2003-03-12
MAM4131B Aluminum Alloy, Die And Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr Solution Heat Treated And Aged
Aerospace Current
2003-03-12
MAM5599C Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 62ni 21.5cr 9.0mo 3.7(Cb+Ta) Annealed
Aerospace Current
2003-03-12
AMS3092 Release Agent, For Use During Form-In-Place Gasket Preparation
Aerospace Historical
2003-03-12
AMS2658B Hardness And Conductivity Inspection Of Wrought Aluminum Alloy Parts
Aerospace Historical
2003-03-12
USCAR19-1 COAXIAL CABLE CONNECTOR INTERFACE – SQUARE OUTER CONDUCTOR
Automotive Historical
2003-03-10
J2645_200303 Liquefied Natural Gas (LNG) Vehicle Metering And Dispensing Systems
Commercial Historical
2003-03-07
J2418_200303 Occupant Restraint System Evaluation–Frontal Impact Component-Level Heavy Trucks
Commercial Historical
2003-03-07
J1095_200303 Spoke Wheels And Hub Fatigue Test Procedures
Commercial Historical
2003-03-07
J192_200303 Maximum Exterior Sound Level For Snowmobiles
Commercial Historical
2003-03-07
AMS3611D Plastic Sheet, Polycarbonate General Purpose
Aerospace Historical
2003-03-04
AMS3614B Polycarbonate Sheet And Parts Optical Grade, Coated
Aerospace Historical
2003-03-04
AMS3650C Rods, Sheets, And Molded Shapes, Polychlorotrifluoroethylene (PCTFE) Unplasticized
Aerospace Historical
2003-03-04
AMS3649C Film, Polychlorotrifluoroethylene (PCTFE) Unplasticized
Aerospace Historical
2003-03-04
AMS3648B Tubing, Polychlorotrifluoroethylene (PCTFE) Unplasticized
Aerospace Historical
2003-03-04
AMS3646C Sheet, Polychlorotrifluoroethylene (PCTFE) Molded, Unplasticized
Aerospace Historical
2003-03-04
AMS3645C Polychlorotrifluoroethylene (PCTFE), Compression Molded Heavy Sections, Unplasticized
Aerospace Historical
2003-03-04
AMS3751B Microspheres, Hollow Glass
Aerospace Historical
2003-03-04
AMS3755/2A Powder, Fumed Silicon Dioxide Thickening Efficiency 95
Aerospace Historical
2003-03-04
AMS3755/1A Powder, Fumed Silicon Dioxide Thickening Efficiency 120
Aerospace Historical
2003-03-04
AMS3670B Polyamide-Imide Bar, Rod, And Shapes Molded Or Extruded
Aerospace Historical
2003-03-04
AMS3617D Nylon Plastic, Moldings And Extrusions
Aerospace Historical
2003-03-04
J2523_200303 Rolling Circumference Index Groups For Radial Tractor Drivetires
Automotive Historical
2003-03-01
J2020_200302 Accelerated Exposure Of Automotive Exterior Materials Using A Fluorescent UV And Condensation Apparatus
Automotive Historical
2003-02-27
J1239_200302 Four-, Five-, And Eight-Conductor Electrical Connectors For Automotive Type Trailers
Automotive Historical
2003-02-27
ARP4101/4 Flight Deck Environment
Aerospace Historical
2003-02-25
J1573_200302 OEM Plastic Parts Repair
Automotive Historical
2003-02-25
ARP4101/2 Pilot Visibility From The Flight Deck
Aerospace Current
2003-02-25
ARP4101 Flight Deck Layout And Facilities
Aerospace Current
2003-02-25
AS5502A Standard Requirements For Aerospace Sealants
Aerospace Historical
2003-02-25
AIR9968 Field Viscosity Test Of Thickened Aircraft Deicing/Anti-Icing Fluids
Aerospace Historical
2003-02-21
AMSS6050A Steel, Chrome-Nickel-Molybdenum (8630) Bars And Reforging Stock (Aircraft Quality)
Aerospace Historical
2003-02-21
AMSS7420A Steel Bars, Alloy, Chromium, High Carbon E52100 (Aircraft Quality)
Aerospace Historical
2003-02-21
AMSS11310A Steel Bars, Carbon, Hot Rolled, For Cold Shaping, Including Cold Extrusion
Aerospace Historical
2003-02-21
AMS7205F Spring Pins, Tubular Carbon Steel
Aerospace Historical
2003-02-21
AMS4910M Titanium Alloy, Sheet, Strip, And Plate 5Al – 2.5Sn Annealed
Aerospace Historical
2003-02-21
J964_200302 Recommended Practice For Measuring Haze And Reflectance Of Mirrors
Automotive Historical
2003-02-21
AMSQQS763A Steel, Corrosion Resistant, Bars, Wire, Shapes, And Forgings
Aerospace Historical
2003-02-21
AMS4951G Titanium Welding Wire Commercially Pure Environment Controlled Packaging
Aerospace Historical
2003-02-21
AMS4190G Aluminum Alloy, Welding Wire 5.2Si (4043)
Aerospace Historical
2003-02-21
J1246_200302 Measuring The Radius Of Curvature Of Convex Mirrors
Automotive Historical
2003-02-20
J45_200302 Brake System Test Procedure–Snowmobiles
Commercial Historical
2003-02-19
J367_200302 Passenger Car Door System Crush Test Procedure
Automotive Current
2003-02-18
J44_200302 Service Brake System Performance Requirements–Snowmobiles
Commercial Historical
2003-02-18
J1282_200302 Snowmobile Brake Control Systems
Commercial Historical
2003-02-18
J517_200302 Hydraulic Hose
Automotive Historical
2003-02-18
J1542_200302 Laboratory Testing Of Vehicle And Industrial Heat Exchangers For Thermal Cycle Durability
Automotive Historical
2003-02-13
ARP936A Capacitor, 10 Microfarad For EMI Measurements
Aerospace Historical
2003-02-12
J2568_200302 Intrusion Resistance Of Safety Glazing Systems For Road Vehicles
Automotive Historical
2003-02-12
ARP958D Electromagnetic Interference Measurement Antennas; Standard Calibration Method
Aerospace Historical
2003-02-12
AMSPRF46194A Foam, Rigid, Structural, Closed Cell
Aerospace Historical
2003-02-11
AS1424E Hose Assemblies, Metal, Medium Pressure, High Temperature
Aerospace Historical
2003-02-10
AS5901 Water Spray And High Humidity Endurance Test Methods For SAE AMS 1424 And SAE AMS 1428 Aircraft Deicing/Anti-Icing Fluids
Aerospace Historical
2003-02-10
AS5900 Standard Test Method For Aerodynamic Acceptance Of SAE AMS 1424 And SAE AMS 1428 Aircraft Deicing/Anti-Icing Fluids
Aerospace Historical
2003-02-10
AMSSTD182A Continuous Identification Marking Of Nickel And Nickel Base Alloys
Aerospace Current
2003-02-07
ARP1383B Impulse Testing Of Aerospace Hydraulic Actuators, Valves, Pressure Containers, And Similar Fluid System Components
Aerospace Historical
2003-02-05
J1065_200302 Nominal Reference Working Pressures For Steel Hydraulic Tubing
Automotive Historical
2003-02-05
J846_200302 Coding Systems For Identification Of Fluid Conductors And Connectors
Automotive Historical
2003-02-01
AS4377B FITTING END, BULKHEAD, FLARELESS, DESIGN STANDARD
Aerospace Historical
2003-01-30
AMSSTD183A Continuous Identification Marking Of Iron And Steel Products
Aerospace Current
2003-01-30
J1487_200301 Rating Air-Conditioner Evaporator Air Delivery And Cooling Capacities
Commercial Historical
2003-01-30
J1805_200301 Sound Power Level Measurements Of Earthmoving Machinery– Static And In-Place Dynamic Methods
Automotive Historical
2003-01-30
ARP577D Emergency Placarding – Internal And External
Aerospace Historical
2003-01-30
AS4375B FITTING END, FLARELESS, DESIGN STANDARD
Aerospace Historical
2003-01-30
J2614_200301 Welded And Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed For Bending And Flaring
Automotive Historical
2003-01-30
J361_200301 Procedure For Visual Evaluation Of Interior And Exterior Automotive Trim
Automotive Historical
2003-01-30
MA2140 HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 28 000 KPa, HYDRAULIC AND PNEUMATIC
Aerospace
2003-01-26
J1071_200301 Operator Controls For Graders
Commercial Historical
2003-01-24
J725_200301 Mounting Brackets And Socket For Warning Lamp And Slow-Moving Vehicle (SMV) Identification Emblem
Commercial Current
2003-01-24
AMS4952C Titanium Alloy, Welding Wire 6AI – 2Sn – 4Zr – 2Mo
Aerospace Historical
2003-01-24
J2387_200301 Dimensions And Tolerances For Coolant System Hoses
Automotive Historical
2003-01-24
J1050_200301 Describing And Measuring The Driver’s Field Of View
Automotive Historical
2003-01-24
AMS3281C Sealing Compound, Polysulfide (T) Synthetic Rubber For Integral Fuel Tank And Fuel Cell Cavities Low Density (1.20 To 1.35 Sp Gr), For Intermittent Use To 360 °F (182 °C)
Aerospace Historical
2003-01-24
J20_200301 Coolant System Hoses
Automotive Historical
2003-01-24
AS150D Hose Assembly, Type Classifications Of, Basic Performance And Fire Resistance
Aerospace Historical
2003-01-23
AMS6428G Steel, Bars, Forgings, And Tubing 0.80Cr-1.8Ni-0.35Mo-0.20V(0.32-0.38C) (4335 Modified)
Aerospace Historical
2003-01-23
ARP5526 Aircraft Seat Design Guidance And Clarifications
Aerospace Historical
2003-01-23
AMS6320L Steel Bars, Forgings, And Rings 0.50Cr – 0.55Ni – 0.25Mo (0.33 – 0.38C) (SAE 8735)
Aerospace Historical
2003-01-22
J2571_200301 Advanced Driver Interface Systems For Commercial Vehicle Operations
Commercial Current
2003-01-22
AMS6327H Steel Bars And Forgings 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740) Heat Treated, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2003-01-22
AMS6328K Steel, Bars, Forgings, And Tubing 0.50Cr – 0.55Ni – 0.25Mo (0.48 To 0.53C) (SAE 8750)
Aerospace Historical
2003-01-22
AMS6469C Steel, Welding Wire 1.75Mn – 0.78Cr – 2.8Ni – 0.85Mo – (0.09 – 0.12C) Vacuum Melted, Environment-Controlled Packaging
Aerospace Historical
2003-01-22
AMS6407G Steel, Bars, Forgings, And Tubing 1.2Cr – 2.0Ni – 0.45Mo (0.27 – 0.33C)
Aerospace Historical
2003-01-22
AMS5764D Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, And Rings 5.0Mn – 22Cr – 12.5Ni – 2.2Mo – 0.20Cb – 0.30N – 0.20V Solution Heat Treated
Aerospace Historical
2003-01-22
AMS6280J Steel Bars, Forgings, And Rings 0.50Cr – 0.55Ni – 0.20Mo (0.28 – 0.33C) (SAE 8630)
Aerospace Historical
2003-01-22
AMS6317G Steel Bars And Forgings 1.8Ni – 0.25Mo (0.38 – 0.43C) (4640) Heat Treated, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2003-01-22
AMS5132J Steel, Bars 0.90 – 1.03C
Aerospace Historical
2003-01-22
AMS6303F Steel Bars And Forgings, Low Alloy, Heat Resistant 0.65Si – 1.25Cr – 0.50Mo – 0.85V (0.25 – 0.30C)
Aerospace Historical
2003-01-22
AMS3143A Powder Coating Materials, Epoxy
Aerospace Historical
2003-01-22
J1752/2_200301 Measurement Of Radiated Emissions From Integrated Circuits — Surface Scan Method (Loop Probe Method) 10 MHz To 3 GHz
Automotive Historical
2003-01-21
J958_200301 Nomenclature And Dimensions For Crane Shovels
Commercial Historical
2003-01-21
AMSS22141A Steel, Investment Castings Alloy And Carbon
Aerospace Current
2003-01-21
AMSS6098A Steel, Chrome-Nickel-Molybdenum (8735) Bars And Reforging Stock (Aircraft Quality)
Aerospace Current
2003-01-21
J1752/3_200301 Measurement Of Radiated Emissions From Integrated Circuits — TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 KHz To 1 GHz), Wideband TEM Cell (150 KHz To 8 GHz)
Automotive Historical
2003-01-21
AMS5779D Alloy Welding Electrodes, Covered, Corrosion And Heat Resistant 75Ni – 15Cr – 1.5 (Cb+Ta) – 1.9Ti – 0.55Al – 5.5Fe
Aerospace Historical
2003-01-17
AMSS8802A Sealing Compound, Temperature Resistant, Integral Fuel Tanks And Fuel Cell Cavities, High Adhesion
Aerospace Historical
2003-01-17
AMS3276D Sealing Compound, Integral Fuel Tanks And General Purpose, Intermittent Use To 360 °F (182 °C)
Aerospace Historical
2003-01-16
AS1424D Hose Assemblies, Metal, Medium Pressure, High Temperature
Aerospace Historical
2003-01-16
AMSS83318A Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks And Fuel Cell Cavities
Aerospace Historical
2003-01-16
AS8879C Screw Threads – UNJ Profile, Inch Controlled Radius Root With Increased Minor Diameter
Aerospace Historical
2003-01-15
ARP1384C Passenger Safety Information Briefing Cards And Video Briefings
Aerospace Historical
2003-01-14
ARP4925A Aerospace Design And Installation Of Commercial Transport Helicopter Hydraulic Systems
Aerospace Historical
2003-01-13
AMS3269A Sealing Compound, Polysulfide (T) Synthetic Rubber For Integral Fuel Tank And Fuel Cell Cavities High Strength, For Intermittent Use To 360 °F (182 °C)
Aerospace Historical
2003-01-13
AIR910B Ozone In High Altitude Aircraft
Aerospace Historical
2003-01-11
ARP598C Aerospace Microscopic Sizing And Counting Of Particulate Contamination For Fluid Power Systems
Aerospace Historical
2003-01-11
ARP5996 Evaluation Of Coking Propensity Of Aviation Lubricants Using The Hot Liquid Process Simulator (HLPS) Single Phase Flow Technique
Aerospace Historical
2003-01-11
ARP5376A Methods, Locations And Criteria For System Sampling And Measuring The Solid Particle Contamination Of Hydraulic Fluids
Aerospace Historical
2003-01-11
ARP5583 Guide To Certification Of Aircraft In A High Intensity Radiated Field (HIRF) Environment
Aerospace Historical
2003-01-11
ARP5483/2 Rolling Element Bearing Hardness Test
Aerospace Historical
2003-01-11
AS9110 Quality Maintenance Systems – Aerospace – Requirements For Maintenance Organizations
Aerospace Historical
2003-01-11
J392_200301 Motorcycle And Motor Driven Cycle Electrical System Maintenance Of Design Voltage
Commercial Historical
2003-01-09
J2634_200301 Scribing Of Coatings In Preparation For Testing Of Wheels And Wheel Trim
Automotive Historical
2003-01-09
AS4468B Hose Assembly, 125 Psi, Lined Silicone, Potable Water, Procurement Specification
Aerospace Historical
2003-01-09
J2485_200301 Fastener Part Standard – Machine Screw Nuts (Metric And Inch)
Commercial Historical
2003-01-09
J443_200301 Procedures For Using Standard Shot Peening Test Strip
Automotive Historical
2003-01-09
J584_200301 Motorcycle Headlamps
Commercial Historical
2003-01-09
J2277_200301 Shot Peening Coverage
Automotive Historical
2003-01-09
AS5420A Hose Assembly, Heated, 125 Psig, Lined Silicone, Potable Water, Procurement Specification
Aerospace Historical
2003-01-09
AMS7918 Beryllium Aluminum Alloy Investment Castings 64.9Be – 30Al – 3Ag – 1Co – 0.75Ge As Cast
Aerospace Historical
2003-01-07
AMS4908G Titanium Alloy Sheet And Strip 8mn Annealed, 110 Ksi (760 Mpa) Yield Strength
Aerospace Current
2003-01-07
AMS4997B Titanium Alloy, Powder 5Al 2Sn 2Zr 4Cr 4Mo 0.10O₂, Premium Quality
Aerospace Current
2003-01-07
AMS2408H Plating, Tin
Aerospace Historical
2003-01-07
AMS2415H Plating, Lead And Indium
Aerospace Historical
2003-01-07
AMS4328 Aluminum Alloy, Plate (2397-T87) 2.8Cu – 1.4Li – 0.30Mn – 0.12Zr – 0.10Zn Solution Heat Treated, Cold Worked, And Artificially Aged
Aerospace Historical
2003-01-07
AMS4897A Titanium Alloy, Sheet, Strip, And Plate 77Ti – 15Mo – 3.0Al – 2.8Cb – 0.20Si
Aerospace Historical
2003-01-07
AMS4899A Titanium Alloy, Sheet, Strip, And Plate 4.5Al – 3V – 2Fe – 2Mo Annealed
Aerospace Historical
2003-01-07
AMS4918J Titanium Alloy, Sheet, Strip, And Plate 6Al – 6V – 2Sn Annealed
Aerospace Historical
2003-01-07
AMS4909G Titanium Alloy, Sheet, Strip, And Plate 5Al – 2.5Sn, Extra Low Interstitial Annealed
Aerospace Historical
2003-01-07
AMS4984C Titanium Alloy Forgings 10V – 2Fe – 3Al Consumable Electrode Melted, Solution Heat Treated And Aged 173 Ksi (1193 MPa) Tensile Strength
Aerospace Historical
2003-01-07
AMS4972E Titanium Alloy Bars, Wire, And Rings 8Al – 1Mo – 1V Solution Heat Treated And Stabilized
Aerospace Historical
2003-01-07
J682_200301 Rear Wheel Splash And Stone Throw Protection
Commercial Historical
2003-01-01
AS4601-6 AS4601 Wire Thread Inserts (BA, BSF And BSW) Unplated
Aerospace Current
2003-01-01
AS4934-5 AS4934 Wire Thread Inserts (BA, BSF And BSW) Cadmium Plated
Aerospace Current
2003-01-01
AS4921-5 AS4921 Wire Thread Inserts (BA, BSF And BSW) Cadmium Plated
Aerospace Current
2003-01-01
AS4922-5 AS4922-4933 Wire Thread Inserts (BSPF) Cadmium Plated
Aerospace Current
2003-01-01
AS4935-5 AS4935-4946 Wire Thread Inserts (BSPF) Cadmium Plated
Aerospace Current
2003-01-01
AS4700-5 AS4700 Wire Thread Inserts (BA, BSF And BSW) Unplated
Aerospace Current
2003-01-01
AS6316-7 AS6316 Wire Thread Inserts (UNF) Unplated
Aerospace Current
2003-01-01
AS6317-7 AS6317 Wire Thread Inserts (UNC) Unplated
Aerospace Current
2003-01-01
AS64100-1 AS64100-199 Bolt, Captive, Reduced Shank
Aerospace Current
2003-01-01
AS64000-1 AS64000-099 Bolt, Captive, Reduced Shank
Aerospace Current
2003-01-01
AS6695-5 AS6695 Wire Thread Inserts (UNF) Unplated
Aerospace Current
2003-01-01
AS6696-5 AS6696 Wire Thread Inserts (UNC) Unplated
Aerospace Current
2003-01-01
AS8452-6 AS8452 Wire Thread Inserts (UNC) Cadmium Plated
Aerospace Current
2003-01-01
AS8451-6 AS8451 Wire Thread Inserts (UNF) Cadmium Plated
Aerospace Current
2003-01-01
AS8454-5 AS8454 Wire Thread Inserts (UNC) Cadmium Plated
Aerospace Current
2003-01-01
AS8453-5 AS8453 Wire Thread Inserts (UNF) Cadmium Plated
Aerospace Current
2003-01-01
AS4701-5 AS4701-4712 Wire Thread Inserts (BSPF) Unplated
Aerospace Current
2003-01-01
AS4602-6 AS4602-4613 Wire Thread Inserts (BSPF) Unplated
Aerospace Current
2003-01-01
AS63900-1 AS63900-999 Bolt, Captive, Reduced Shank
Aerospace Current
2003-01-01
ARINC735A-1 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
Aerospace Current
2003-01-01
J1179_200212 Hydraulic Excavator And Backhoe Digging Forces
Commercial Historical
2002-12-23
J2121_200212 Requirements For Composite Lighting Assemblies Used On Construction And Industrial Machinery
Commercial Historical
2002-12-20
J2331_200212 Operators Field Of View–Engineering Evaluation
Commercial Historical
2002-12-20
J1452_200212 Trailer Grade Parking Performance Test Procedure
Automotive Historical
2002-12-20
J968/2_200212 Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement
Automotive Historical
2002-12-20
J968/1_200212 Diesel Injection Pump Testing—Part 1: Calibrating Nozzle And Holder Assemblies
Automotive Historical
2002-12-20
ARP1820A Chord Method Of Evaluating Surface Microstructural Characteristics
Aerospace Historical
2002-12-20
J288_200212 Snowmobile Fuel Tanks
Commercial Historical
2002-12-20
J463_200212 Wrought Copper And Copper Alloys
Automotive Historical
2002-12-20
J461_200212 Wrought And Cast Copper Alloys
Automotive Historical
2002-12-20
J276_200212 Steering Frame Lock For Articulated Loaders And Tractors
Commercial Historical
2002-12-20
AS39901A Bearings, Roller, Needle, Airframe, Antifriction, Inch
Aerospace Historical
2002-12-19
J1109_200212 Component Nomenclature–Articulated Log Skidder, Rubber-Tired
Automotive Historical
2002-12-19
J1111_200212 Component Nomenclature–Skidder-Grapple
Automotive Historical
2002-12-19
J1254_200212 Component Nomenclature–Feller Buncher
Automotive Historical
2002-12-19
J1464_200212 Identification Terminology Of Loaders/Tractors With Forks And Rough Terrain Forklifts
Automotive Historical
2002-12-19
ARP982C Minimizing Stress-Corrosion Cracking In Wrought Titanium Alloy Products
Aerospace Historical
2002-12-19
J1939/75_200212 Application Layer – Generator Sets And Industrial
Multiple Historical
2002-12-19
J1493_200212 Shielding Of Starter System Energization
Commercial Historical
2002-12-19
J1353_200212 Nomenclature–Clam Bunk Skidder
Automotive Historical
2002-12-19
J1354_200212 Nomenclature-Forwarder
Commercial Historical
2002-12-19
J297_200212 Operator Controls On Industrial Equipment
Commercial Historical
2002-12-18
J1051_200212 Force-Deflection Measurements Of Cushioned Components Of Seats For Off-Road Work Machines
Commercial Historical
2002-12-18
J1083_200212 Unauthorized Starting Or Movement Of Machines
Automotive Historical
2002-12-18
AMS5535 Alloy Sheet And Strip, Corrosion And Heat Resistant Cobalt Base 25.5cr 20ni 4mo 2w 2(Cb+Ta)
Aerospace Current
2002-12-16
AMS4381 Magnesium Alloy Sheet Aluminum Zinc (Hard)
Aerospace Current
2002-12-16
AMS6420 Steel Tubing (Seamless For Machined Parts) 1.8ni 0.80cr 0.25mo (0.38 – 0.43c) Heat Treated (200,000 Tensile Strength)
Aerospace Current
2002-12-16
AMS6531 Steel Tubing (Seamless) Round 0.55ni 0.5cr 0.2mo (0.27 – 0.33c) Heat Treated (125,000 Tensile Strength)
Aerospace Current
2002-12-16
AMS6283 Steel Tubing (Seamless For Machined Parts) .55ni .25mo (.33 – .38c) Normalized Or Heat-Treated (90,000 Tensile Strength)
Aerospace Current
2002-12-16
AMS6284 Steel Tubing (Seamless For Machined Parts) .55ni .50cr .25mo (.35 – .38c) Heat-Treated (125,000 Tensile Strength)
Aerospace Current
2002-12-16
AMS6285 Steel Tubing (Seamless For Machined Parts) .55ni .50cr .25mo (.38 – .43c) Heat-Treated (180,000 Tensile Strength)
Aerospace Current
2002-12-16
AMS6286 Steel Tubing (Seamless For Machined Parts) .55ni .50cr .25mo (.38-.43c) Heat-Treated (180,000 T.S.)
Aerospace Current
2002-12-16
AMS6366 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 – .39 Carbon) (125,000 Tensile Strength)
Aerospace Current
2002-12-16
AMS6367 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 – .39 Carbon) (150,000 Tensile Strength)
Aerospace Current
2002-12-16
AMS6368 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 – .39 Carbon) (200,000 Tensile Strength)
Aerospace Current
2002-12-16
AMS6369 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 – .39 Carbon) (200,000 T.S.)
Aerospace Current
2002-12-16
AMS6363 Steel Tubing (Seamless), Round Chromium Molybdenum (0.27 – 0.33 Carbon) (180,000 Tensile Strength – 0.156 Maximum Wall Thickness)
Aerospace Current
2002-12-16
AMS5730 Steel Corrosion And Heat Resistant 19cr 12ni 3.2w 1cb 0.15n
Aerospace Current
2002-12-16
AMS7213 Cotter Pins, Medium Carbon Steel Zinc Plated
Aerospace Current
2002-12-16
J1327_200212 Fuel Fired Engine Preheaters And Their Application
Commercial Current
2002-12-16
J956_200212 Remote And Automatic Control Systems For Construction And Industrial Machinery
Commercial Current
2002-12-16
ARP421 Overhaul Facilities For Aircraft Instruments
Aerospace Current
2002-12-16
ARP835 Minimum Requirements For Pallet Dolly
Aerospace Current
2002-12-16
ARP886 Sst Ground Handling
Aerospace Current
2002-12-16
ARP945 Minimum Requirements For Air Cargo Systems
Aerospace Current
2002-12-16
AS815 Spark Igniter Outline – .500-20 Threaded Mounting
Aerospace Current
2002-12-16
AS845 Minimum Design Standards For Smoke Protection Goggles For Air Transport Crew
Aerospace Current
2002-12-16
AS211 Flasher, Position Light
Aerospace Current
2002-12-16
AIR20 Pressure Die Cast Aircraft Wheels And Brakes – Quality Evaluation
Aerospace Current
2002-12-16
AIR31 Environmental Conditions Applicable To Transport Aircraft Electrical Equipment
Aerospace Current
2002-12-16
AIR37 Air Turbine Starter Composite Outline Drawings
Aerospace Current
2002-12-16
AIR61 Hot Gas Turbine Starter Composite Outline Drawings
Aerospace Current
2002-12-16
AIR60 Various Types Of Aircraft Electric Wire
Aerospace Current
2002-12-16
AIR722 Integrated Flight Instruments And Flight Control Systems
Aerospace Current
2002-12-16
AIR74 Considerations On Limiting Pressure Surge During Ground Pressure Refueling Of Aircraft
Aerospace Current
2002-12-16
AS939 Solder Sleeves, Heat Shrinkable, Insulated
Aerospace Current
2002-12-16
MAP1794 Aircraft Recommended Practice, Ball-On-Cylinder (Boc) Aircraft Turbine Fuel Lubricity Tester
Aerospace Current
2002-12-16
ARP555 Exhaust Shroud Mounting Surfaces For Non Qad Generators Only Dc Or Ac
Aerospace Current
2002-12-16
ARP554 Exhaust Shroud Mounting Surfaces For Qad Generators Only Dc Or Ac 5 Kva To 120 Kva Incl.
Aerospace Current
2002-12-16
ARP576 Outline And Instructions For Preparation Of Model Specifications For Hydraulic System Equipment
Aerospace Current
2002-12-16
ARP601 Hose Assemblies, Flexible, Metal, Aeronautical, Low Pressure
Aerospace Current
2002-12-16
ARP605 Routine Inspection And Test Procedures For Aircraft Refueling Hoses
Aerospace Current
2002-12-16
ARP602 Hose Assemblies, Flexible Metal, Aeronautical, Medium Pressure
Aerospace Current
2002-12-16
ARP615 Hose Assemblies: Pneumatic, Aircraft And Missiles, High Temperature, High Pressure
Aerospace Current
2002-12-16
ARP609 Hose Assemblies: Pneumatic, Aircraft And Missiles, High Temperature, Medium Pressure
Aerospace Current
2002-12-16
ARP610 Synthetic Or Natural Rubber Lined Pneumatic Hose Assemblies, Aircraft
Aerospace Current
2002-12-16
ARP765 Elastomer, Synthetic Compounds, High And Low Temperature, Fuel And Oil Resistant
Aerospace Current
2002-12-16
ARP796 MEASUREMENTS OF AIRCRAFT EXTERIOR NOISE IN THE FIELD
Aerospace Current
2002-12-16
ARP819 Fluid System Characteristics Affecting Hydraulic Pump Operation
Aerospace Current
2002-12-16
ARP816 Pressure Fueling Simulator For Evaluating Aircraft Fuel Systems Under Design Pressure Fueling Conditions
Aerospace Current
2002-12-16
ARP824 Hose Assemblies, Flexible Metal, High Pressure And High Temperature
Aerospace Current
2002-12-16
ARP698 THE PROCESS OF LUBRICATING AND TORQUING THREADED ASSEMBLIES RECOMMENDATIONS FOR CIVIL AIRCRAFT APPLICATIONS
Aerospace Current
2002-12-16
ARP724 PilotS Center Instrument Overhead Panels And Flight EngineerS Panel
Aerospace Current
2002-12-16
ARP669 Color Coding Of Terminals And Wiring For Flight Equipment
Aerospace Current
2002-12-16
ARP664 Aircraft Air Compressor Lubricating Oil
Aerospace Current
2002-12-16
AIR1115 EVALUATION OF HEADPHONES FOR DEMONSTRATION OF AIRCRAFT NOISE
Aerospace Current
2002-12-16
AIR1216 COMPARISON OF GROUND-RUNUP AND FLYOVER NOISE LEVELS
Aerospace Current
2002-12-16
AIR1286 HELICOPTER AND V/STOL AIRCRAFT NOISE MEASUREMENT PROBLEMS
Aerospace Current
2002-12-16
AIR1079 AIRCRAFT NOISE RESEARCH NEEDS
Aerospace Current
2002-12-16
AIR17 Structural Characteristics Of Aircraft Tubing
Aerospace Current
2002-12-16
AIR1416 PHOSPHATE ESTER AIRCRAFT HYDRAULIC FLUID CONTAMINATION WITH CHLORINE CONTAINING COMPOUNDS
Aerospace Current
2002-12-16
ARP466 Flange – Thermocouple Mounting 1.875 Centers
Aerospace Current
2002-12-16
ARP1071 Definitions And Procedures For Computing The Effective Perceived Noise Level For Flyover Aircraft Noise
Aerospace Current
2002-12-16
ARP1042 Precision Sleeve, Coupling Flareless
Aerospace Current
2002-12-16
ARP1342 PERIODIC SURVEILLANCE PROCEDURES FOR VERTICAL, STATIC, BALANCING MACHINES
Aerospace Current
2002-12-16
ARP1180 Hose Assemblies: Aircraft And Missiles, Light-Weight Plastic Hose, Low Pressure
Aerospace Current
2002-12-16
ARP1166 Instrument Panel Arrangement For Fixed Wing Aircraft Under 12,500 Lb.
Aerospace Current
2002-12-16
ARP1254 1990 Fluidics Test Methods And Instrumentation
Aerospace Current
2002-12-16
ARP1469 Restraint Device For Infants
Aerospace Current
2002-12-16
ARP1411 Flight Deck Environment
Aerospace Current
2002-12-16
ARP1570 Flight Management Computer System
Aerospace Current
2002-12-16
AIR867 LONG TERM STORAGE FOR MISSILE HYDRAULIC CONTROL SYSTEMS – DESIGN AND OPERATIONAL PRACTICES GUIDE
Aerospace Historical
2002-12-16
AIR875 A Comparison Of Government Relay Specifications
Aerospace Current
2002-12-16
AIR852 METHODS OF COMPARING AIRCRAFT TAKEOFF AND APPROACH NOISES
Aerospace Current
2002-12-16
AIR912 Starting System Installation, Description And Guide
Aerospace Current
2002-12-16
AIR817 A TECHNIQUE FOR NARROW BAND ANALYSIS OF A TRANSIENT
Aerospace Current
2002-12-16
AS1198 Aerospace Wires And Cables – Methods Of Testing
Aerospace Current
2002-12-16
AS135 Screw Heads, Flat Fillister – Large Fillet Aircraft Engine
Aerospace Current
2002-12-16
AS134 Bolt Heads, Hexagon – Large Fillet Aircraft Engine
Aerospace Current
2002-12-16
AS132 Pin – Taper
Aerospace Current
2002-12-16
AS1396 Clamp, Half Tube Support
Aerospace Current
2002-12-16
AS872 Nut, Sleeve, Coupling, Flareless Tube
Aerospace Current
2002-12-16
AS915 Conductivity Standard – Eddy Current: Type Of Aluminum Alloy Temper Testing Equipment
Aerospace Current
2002-12-16
AS608 High Pressure Compressed Gas Hose Assemblies For Aircraft And Missile Ground Support Equipment
Aerospace Current
2002-12-16
AS521 DRIVE ACCESSORY 9.000 PILOT DIAMETER – QAD
Aerospace Current
2002-12-16
AS528 ADAPTER – 10.000 BOLT CIRCLE TO 4.125 PILOT DIAMETER – QAD
Aerospace Current
2002-12-16
AS535 DRIVE – 3/4 * GENERATOR-10″ BC- FEMALE PILOT
Aerospace Current
2002-12-16
AS1000 Cap Assembly – Pressure Seal, Flareless Tube Fitting
Aerospace Current
2002-12-16
ARP956 Summary Of Transportation, Handling And Storage Requirements For Starter Cartridges, Jet Engine, Mxu-4/A And Mxu-129/A
Aerospace Current
2002-12-16
ARP937 Jet Engine Electromagnetic Interference Test Requirements And Test Method
Aerospace Current
2002-12-16
ARP917B Stowage Of Flight CrewS Survival Emergency, And Miscellaneous Equipment
Aerospace Current
2002-12-16
ARP911 STANDARDIZATION OF DRIVE END OF HYDRAULIC OR GEARED TORQUE WRENCHES FOR USE TO AN UPPER LIMIT OF 500,000 INCH POUNDS
Aerospace Current
2002-12-16
AS1026 Nut – Adjustable Flared Union Assembly
Aerospace Current
2002-12-16
AS1027 Nut – Drilled Jam
Aerospace Current
2002-12-16
AS1024 Union Assembly – Adjustable Flared
Aerospace Current
2002-12-16
AS1025 Screw, Union Adjustable – Flared
Aerospace Current
2002-12-16
AS1028 Nut, Coupling, Flared Tube, With Lockwire Holes
Aerospace Current
2002-12-16
AS1021 Nut – Adjustable Flareless Bulkhead Union Assembly
Aerospace Current
2002-12-16
AS1020 Screw, Union Adjustable Flareless
Aerospace Current
2002-12-16
AS1023 Nut – Adjustable Flared Bulkhead Union Assembly
Aerospace Current
2002-12-16
AS1022 Bulkhead Union Assembly – Adjustable Flared
Aerospace Current
2002-12-16
AS1018 Nut – Adjustable Flareless Union Assembly
Aerospace Current
2002-12-16
AS1017 Union Assembly – Adjustable Flareless
Aerospace Current
2002-12-16
AS1019 Bulkhead Union Assembly – Adjustable Flareless
Aerospace Current
2002-12-16
AS1142 1992 Hermeticity Testing Of Microelectronic Devices
Aerospace Current
2002-12-16
AS1041 Nut, Sleeve Coupling, Flareless Tube, With Lockwire Holes
Aerospace Current
2002-12-16
AS463 Oxygen Regulators For Commercial Transport Aircraft
Aerospace Current
2002-12-16
AS481 FLANGE PILOT-ACCESSORY, 5″-8″-10″ BOLT CIRCLE
Aerospace Current
2002-12-16
AS474 FLANGE-ACCESSORY- SLOTTED MOUNTING HOLES
Aerospace Current
2002-12-16
AS235 TERMINAL, THERMO-SENSITIVE ELEMENT
Aerospace Current
2002-12-16
AS273 Position Light Flashers: Single-Circuit (Personal Aircraft Types)
Aerospace Current
2002-12-16
AS280 Wheel And Axle Dimensions For Type Vii Tire-Stub (Tapered) Axle Type
Aerospace Current
2002-12-16
AS696 Aircraft Constant Displacement Hydraulic Motor
Aerospace Current
2002-12-16
AS759 Fittings, Universal Or Internally Threaded, Flared And Flareless
Aerospace Current
2002-12-16
AS757 Boss, Straight Thread Gasket Seal, Standard Dimensions For
Aerospace Current
2002-12-16
ARP1340 PERIODIC SURVEILLANCE PROCEDURES For HORIZONTAL DYNAMIC BALANCING MACHINES
Aerospace Historical
2002-12-16
AMS4969 Titanium Alloy, 5.4al 1.4cr 1.3fe 1.25mo Annealed 135,000 Psi Yield
Aerospace Current
2002-12-16
AMS4929 Titanium Alloy, 5.4al 1.4cr 1.3fe 1.25mo Annealed 135,000 Psi Yield
Aerospace Current
2002-12-16
AMS4927 Titanium Alloy, 5cr 3al
Aerospace Current
2002-12-16
AMS5043 Steel, Sheet And Strip Forming (Special Quality) Low Carbon
Aerospace Current
2002-12-16
AMS3230 GASKET, OIL RESISTING
Aerospace Current
2002-12-16
AMS3288 Felt, Upholstery (100% Wool)
Aerospace Current
2002-12-16
AMS3290 Felt, (Firm Pad), Gray, (80% Wool)
Aerospace Current
2002-12-16
AMS3291 Felt, Kapok
Aerospace Current
2002-12-16
AMS4430 Magnesium Alloy Castings Sand 9 Al 2 Zn As Cast
Aerospace Current
2002-12-16
AMS4428 Magnesium Alloy Castings, Sand 6ce Solution And Precipitation Treated
Aerospace Current
2002-12-16
J1184_200212 Definitions Of Acoustical Terms
Automotive Current
2002-12-16
AMS2233 Tolerances Carbon Steel Seamless Tubing
Aerospace Current
2002-12-16
AMS3542 Wrapper, Greaseproof Paper (Laminated)
Aerospace Current
2002-12-16
AMS3392 IGNITION CABLE, HIGH TENSION Copper Conductor
Aerospace Current
2002-12-16
AMS3397 Ignition-Cable, High Tension Copper Conductor, Low Capacitance
Aerospace Current
2002-12-16
AMS3390 Ignition-Cable, High Tension Copper Conductor
Aerospace Current
2002-12-16
AMS3385 Markers, Ignition-Cable Non-Metallic
Aerospace Current
2002-12-16
AMS3602 Plastic Sheet And Plate, Electrical And Heat Resistant Glass Fabric Reinforced Melamine-Formaldehyde
Aerospace Current
2002-12-16
AMS4292 Cast Aluminum Alloy, Pressure Molded (Aluminum Silicon)
Aerospace Current
2002-12-16
AMS7275 Rings, Sealing, Synthetic Rubber Synthetic Lubricant Resistant (65-85) Fluorocarbon Type
Aerospace Current
2002-12-16
AMS7715 Steel Sheet And Strip, Flat-Rolled Electrical 4.25si Aisi Type M-15, Semiprocessed
Aerospace Current
2002-12-16
AMS7714 Steel Sheet And Strip, Flat-Rolled Electrical 3si Aisi Type M-19, Semiprocessed
Aerospace Current
2002-12-16
AMS4188/5 ALUMINUM ALLOY WELDING WIRE 7.0Si – 0.52Mg (357.0)
Aerospace Current
2002-12-16
AMS4188/4 ALUMINUM ALLOY WELDING WIRE 7.0Si – 0.30Mg (A356.0)
Aerospace Current
2002-12-16
AMS4105 Aluminum Alloy, Sheet And Plate 4.5cu 1.5mg 0.60mn (2024-T86) Width Over 48 To 60 In., Incl.
Aerospace Current
2002-12-16
AMS4099 Aluminum Alloy, Sheet And Plate 4.5 Cu – 1.5 Mg – 0.60 Mn (2024-T36) Width Over 60 In.
Aerospace Current
2002-12-16
AMS4098 Aluminum Alloy, Sheet And Plate 4.5 Cu – 1.5 Mg – 0.60 Mn (2024-T36) Width Over 48 To 60 In., Incl.
Aerospace Current
2002-12-16
AMS4097 Aluminum Alloy, Sheet And Plate 4.5 Cu – 1.5 Mg – 0.60 Mn (2024-T36) Width 48 In. And Under
Aerospace Current
2002-12-16
AMS4103 Aluminum Alloy, Sheet And Plate 4.5cu 1.5mg 0.60mn (2024-T36) Width 30 In. And Under
Aerospace Current
2002-12-16
AMS4104 Aluminum Alloy, Sheet And Plate 4.5cu 1.5mg 0.60mn (2024-T36) Width Over 30 To 48 In., Incl.
Aerospace Current
2002-12-16
AMS4106 Aluminum Alloy, Sheet And Plate 4.5cu 1.5mg 0.60mn (2024-T86) Width Over 60 Inches
Aerospace Current
2002-12-16
AMS5539 Steel Sheet And Strip, Corrosion And Heat Resistant 20cr 9ni 1.6mo 1.4w 0.58ti Hot Rolled And Stress Relieved, 125,000 Psi
Aerospace Current
2002-12-16
AMS7899 Tungsten Sheet And Strip
Aerospace Current
2002-12-16
AMS7821 Molybdenum Alloy Forgings 0.5 Ti 0.08 Zr Arc Cast, Stress Relieved
Aerospace Current
2002-12-16
AMS7813 Molybdenum Alloy Bars 0.5 Ti Arc Cast, Stress Relieved
Aerospace Current
2002-12-16
AMS5748 STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 14Cr – 13.5Co – 5.0Mo – 0.50Ni – 0.20V Premium Quality, Consumable Electrode Melted
Aerospace Historical
2002-12-16
AMS4188/2 ALUMINUM ALLOY WELDING WIRE 4.6Cu – 0.35Mn – 0.25Mg – 0.22Ti (A206.0)
Aerospace Current
2002-12-16
AMS4188/1 ALUMINUM ALLOY WELDING WIRE 4.5Cu – 0.70Ag – 0.30Mn – 0.25Mg – 0.25Ti (A201.0)
Aerospace Current
2002-12-16
AMS4188/3 ALUMINUM ALLOY WELDING WIRE 5.0Si – 1.2Cu – 0.50Mg (C355.0)
Aerospace Current
2002-12-16
AMS5386A Alloy Castings, Precision Investment, Corrosion And Heat Resistant Cobalt Base 27cr 2.8ni 5.5mo
Aerospace Current
2002-12-16
AMS3221B Synthetic Rubber Rapid Fuel Swelling (45-55)
Aerospace Current
2002-12-16
AMS3223B SYNTHETIC RUBBER Hot Oil Resistant – High Swell (55-65)
Aerospace Current
2002-12-16
ARP990 Minimum Requirements For Air Cargo Pallet Nets
Aerospace Current
2002-12-16
AMS5345 Centrifugal Steel Castings Chromium Molybdenum 38-45
Aerospace Current
2002-12-16
AIR1309 AIRCRAFT ENVIRONMENTAL FACTORS FOR DESIGN CONSIDERATION
Aerospace Current
2002-12-16
AIR1312 EXHAUST EMISSION LIMITS FOR DIESEL ENGINES USED IN AIRCRAFT GROUND SUPPORT EQUIPMENT AT AIRPORT ENVIRONMENTS
Aerospace Current
2002-12-16
AIR1044 Interior Contours, Main Deck Cargo Compartments, Jet Powered Cargo Airplanes
Aerospace Current
2002-12-16
ARP458 Universal Maintenance & Overhaul Stand For Turbo-Jet (10,000 Lbs. Thrust Class) And Turbo-Prop Engines
Aerospace Current
2002-12-16
ARP761 Format, Text And Numbering System For Manuals Covering Civil Aircraft Ground Support Equipment
Aerospace Current
2002-12-16
ARP760 400-CYCLE GROUND POWER UNIT PROVISIONS FOR AIRCRAFT ELECTRICAL SYSTEM PROTECTION
Aerospace Current
2002-12-16
ARP709 Technical Data Requirements For Support Equipment
Aerospace Current
2002-12-16
ARP706 Support Equipment Engineering Data Sheet
Aerospace Current
2002-12-16
ARP717 400-Cycle Generator Characteristics For Civil Aircraft Ground Support Applications
Aerospace Current
2002-12-16
ARP834 Minimum Requirements For Self-Propelled Pallet – Transport & Lift Vehicles
Aerospace Current
2002-12-16
ARP831 Pallet Sizes
Aerospace Current
2002-12-16
ARP830 Minimum Requirements For Air Cargo Pallets
Aerospace Current
2002-12-16
ARP775 Test Procedure To Determine Surge Potential Of Ground Pressure Fueling Systems
Aerospace Current
2002-12-16
ARP762 Air Intake Covers – Aircraft
Aerospace Current
2002-12-16
ARP5911 Regional Aircraft Towbarless Tow Vehicle – Test Requirements
Aerospace Historical
2002-12-13
ARP5910 Ramp Markings
Aerospace Historical
2002-12-13
ARP5483/8 Rolling Bearing Dynamic Radial Load Test
Aerospace Historical
2002-12-13
J2030_200212 Heavy-Duty Electrical Connector Performance Standard
Commercial Historical
2002-12-13
J2191_200212 Recommended Practice For Identification Of Standardized Truck And Tractor Electrical Circuits
Automotive Historical
2002-12-13
J2321_200212 Ship Systems And Equipment—General Specification For Filter Elements—Hydraulic And Lube Oil Service
Commercial Current
2002-12-13
MS1003_200212 Lubricants, Industrial Oils, And Related Products Type D Compressor Oils–Specification
Automotive Historical
2002-12-13
J265_200212 Diesel Fuel Injector Assembly—Types 8, 9, 10, And 11
Automotive Historical
2002-12-13
AMS3263A Sealing Compound, Polythioether, Ambient Cure Or Immediate Heat Cure For Aircraft Structures, Fuel Resistant With Intermittent Use To 400°CF (204°CC)
Aerospace Current
2002-12-13
J883_200212 Test Method For Determining Dimensional Stability Of Automotive Textile Materials
Automotive Historical
2002-12-13
J629_200212 Diesel Fuel Injector Assembly – Flange Mounted Types 5 And 6
Automotive Historical
2002-12-13
AMS4931B Titanium Alloy Bars, Forgings, And Rings 6Al – 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
Aerospace Historical
2002-12-13
AS123451A RIVET, SOLID, 100° FLUSH HEAD, CRES, UNS S34700
Aerospace Historical
2002-12-13
J985_200212 Vision Factors Considerations In Rear View Mirror Design
Automotive Historical
2002-12-13
J284_200212 Safety Alert Symbol For Agricultural, Construction, And Industrial Equipment
Commercial Historical
2002-12-13
AMS7498L Rings, Flash Welded Titanium And Titanium Alloys
Aerospace Historical
2002-12-13
AS5391 Health And Usage Monitoring System Accelerometer Interface Specification
Aerospace Historical
2002-12-12
AS9210A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A
Aerospace Historical
2002-12-12
AS9217A BOLT, MACHINE – STEEL, DIFFUSED NICKEL -CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .190-32 UNJF-3A
Aerospace Historical
2002-12-12
AS9216A SCREW, MACHINE – STEEL, DIFFUSED NICKEL -CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A
Aerospace Historical
2002-12-12
AS9209A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A
Aerospace Historical
2002-12-12
AS9207A SCREW, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A
Aerospace Historical
2002-12-12
AS5392 Health And Usage Monitoring System, Rotational System Indexing Sensor Specification
Aerospace Historical
2002-12-12
J2578_200212 Recommended Practice For General Fuel Cell Vehicle Safety
Automotive Historical
2002-12-11
J1273_200212 Recommended Practices For Hydraulic Hose Assemblies
Automotive Historical
2002-12-10
ARP5483/7 Dynamic Radial Load Test, Track Roller Bearings
Aerospace Historical
2002-12-05
AMS5803D Steel, Corrosion And Heat-Resistant, Welding Wire 16.4Cr – 4.8Ni – 0.22Cb – 3.6Cu Vacuum Melted
Aerospace Historical
2002-12-04
AS42749-9 AS42749-799 Gasket
Aerospace Current
2002-12-01
AS42700-8 AS42700-748 Gasket
Aerospace Current
2002-12-01
AMS7254 Perfluoroether Elastomer
Aerospace Historical
2002-11-26
J1101_200211 Test Procedure For Parking Stability Of Motorcycles
Automotive Historical
2002-11-25
J1248_200211 Performance Requirements For Parking Stability Of Motorcycles
Automotive Historical
2002-11-25
ARP5890 Guidelines For Preparing Reliability Assessment Plans For Electronic Engine Controls
Aerospace Historical
2002-11-25
J1108_200211 Truck And Truck Tractor Vehicle Identification Number Systems
Automotive Historical
2002-11-22
J1214_200211 Tire To Body Clearance Check For Recreational Vehicles
Automotive Historical
2002-11-22
AMS5578F Steel, Corrosion And Heat-Resistant, Welded Tubing 12Cr – 8.5Ni – 0.30Cb – 1.1Ti – 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2002-11-22
AMS5558F Steel, Corrosion And Heat-Resistant, Welded Tubing 18Cr – 10.5Ni – 0.70Cb (SAE 30347) Thin Wall Solution Heat Treated
Aerospace Historical
2002-11-22
AMS5640S Steel, Corrosion-Resistant, Bars, Wire, And Forgings 18Cr – 9.0Ni Free Machining
Aerospace Historical
2002-11-22
AMS2368A Sampling And Testing Of Wrought Titanium Raw Material Except Forgings And Forging Stock
Aerospace Historical
2002-11-22
AMSS6090A Steel Carburizing And Nitriding, Processes For
Aerospace Historical
2002-11-21
AMS5696C Steel, Corrosion And Heat-Resistant, Welding Wire 19Cr – 12.5Ni – 2.5Mo High Ferrite Grade
Aerospace Historical
2002-11-21
AMS5950A Nickel Alloy, Corrosion And Heat-Resistant, Sheet And Strip 52.5Ni – 19Cr – 3.0Mo – 5.0Cb – 0.90Ti – 0.50Al – 18Fe Vacuum Induction And Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2002-11-21
AMS4955E Titanium Alloy, Welding Wire 8Al-1Mo-1V
Aerospace Historical
2002-11-21
AMS5869B Nickel Alloy, Corrosion And Heat-Resistant, Sheet, Strip, And Plate 62Ni – 21.5Cr – 9.0Mo – 3.7Cb Solution Heat Treated
Aerospace Historical
2002-11-21
AMS5708H Nickel Alloy, Corrosion And Heat-Resistant, Bars, Forgings, And Rings 58Ni – 19.5Cr – 13.5Co – 4.3Mo – 3.0Ti – 1.4Al Consumable Electrode Or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated
Aerospace Historical
2002-11-21
AMS5529F Steel, Corrosion Resistant, Sheet And Strip 17Cr – 7.1Ni – 1.1Al Solution Heat Treated And Cold Rolled, Precipitation Hardenable 0.0015 To 0.050 Inch (0.038 To 1.27 Mm) Nominal Thickness
Aerospace Historical
2002-11-21
AMS5936B Steel, Corrosion-Resistant, Bars, Wire, And Forgings 12Cr – 11Ni – 1.7Ti – 1Mo Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2002-11-21
AMS5845F Alloy, Corrosion-Resistant, Round Bars 20Cr – 35Ni – 35Co – 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Work Strengthened, And Aged
Aerospace Historical
2002-11-21
AMS5663K Nickel Alloy, Corrosion And Heat-Resistant, Bars, Forgings, And Rings 52.5Ni – 19Cr – 3.0Mo – 5.1Cb – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Or Vacuum Induction Melted 1775 °F (968 °C) Solution And Precipitation Heat Treated
Aerospace Historical
2002-11-21
AMS5878B Nickel Alloy, Corrosion And Heat-Resistant, Sheet, Strip, And Plate 59Ni – 22Cr – 2Mo – 14W – 0.35Al – 0.03La Solution Heat Treated
Aerospace Historical
2002-11-21
USCAR17-1 Performance Specification For Automotive RF Connector Systems
Automotive Historical
2002-11-18
ARP745A General Components Specification For Explosive Actuated Valves One Cycle
Aerospace Current
2002-11-14
AIR888B Fine Wire Mesh For Filter Elements
Aerospace Historical
2002-11-14
J400_200211 Test For Chip Resistance Of Surface Coatings
Automotive Historical
2002-11-12
J1942_200211 Hose And Hose Assemblies For Marine Applications
Automotive Historical
2002-11-12
AS21432 BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL STUD, TYPE VII, ANTIFRICTION, INCH
Aerospace Historical
2002-11-11
AS24465 BEARING, ROLLER, NEEDLE-SINGLE ROW, HEAVY DUTY, TRACK ROLLER, TYPE V, ANTIFRICTION, INCH
Aerospace Historical
2002-11-11
AS24466 BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, TYPE VI, ANTIFRICTION, INCH
Aerospace Historical
2002-11-11
ARP5316B Storage Of Elastomer Seals And Seal Assemblies Which Include An Elastomer Element Prior To Hardware Assembly
Aerospace Historical
2002-11-11
J2599_200211 Fuel Filler Pipe Assembly Design Practice To Meet Low Evaporative Emission Requirements
Automotive Historical
2002-11-07
AS9120 Quality Management Systems – Aerospace Requirements For Stockist Distributors
Aerospace Historical
2002-11-04
J332_200211 Testing Machines For Measuring The Uniformity Of Passenger Car And Light Truck Tires
Automotive Historical
2002-11-01
J1829_200210 Stoichiometric Air-Fuel Ratios Of Automotive Fuels
Automotive Historical
2002-10-31
J1291_200210 Automotive Hydraulic Brake System–Metric Banjo Bolt Connections
Automotive Historical
2002-10-31
J1113/23_200210 Electromagnetic Compatibility Measurement Procedure For Vehicle Components – Immunity To Radiated Electromagnetic Fields, 10 Khz To 200 Mhz, Strip Line Method
Automotive Current
2002-10-31
J1908_200210 Electrical Grounding Practice
Commercial Historical
2002-10-31
J313_200210 Diesel Fuels
Multiple Historical
2002-10-31
J2497_200210 Power Line Carrier Communications For Commercial Vehicles
Commercial Historical
2002-10-31
J1197_200210 Rated Operating Load For Loaders Equipped With Log Or Material Forks Without Vertical Mast
Commercial Historical
2002-10-31
J1811_200210 Power Cable Terminals
Commercial Historical
2002-10-31
J1290_200210 Automotive Hydraulic Brake System–Metric Tube Connections
Automotive Historical
2002-10-31
J1971_200210 Radial Lip Seal Torque–Measurement Method And Results
Automotive Current
2002-10-30
J1177_200210 Hydraulic Excavator Operator Controls
Automotive Historical
2002-10-30
J815_200210 Load Deflection Testing Of Urethane Foams For Automotive Seating
Automotive Historical
2002-10-30
J159_200210 Rated Capacity System
Commercial Current
2002-10-30
AMS4986B Titanium Alloy, Forgings 10V – 2Fe – 3Al Consumable Electrode Melted, Single Solution Heat Treated And Overaged 160 Ksi (1103 MPa) Tensile Strength
Aerospace Historical
2002-10-29
J110_200210 Seals–Testing Of Radial Lip
Automotive Current
2002-10-25
J1901_200210 Lip Force Measurement–Radial Lip Seals
Automotive Current
2002-10-25
J1947_200210 O.D. Coatings For Radial Lip-Type Shaft Seals
Automotive Current
2002-10-25
J1635_200210 SAE Cold Start And Driveability Procedure
Automotive Current
2002-10-25
J1984_200210 Diesel Fuel Injector Assembly Type 28 (9.5 Mm)
Automotive Historical
2002-10-25
J1900_200210 Seals–Bond Test Fixture And Procedure
Automotive Current
2002-10-25
J2613_200210 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed For Bending, Double Flaring, And Bending
Automotive Historical
2002-10-25
MS1008_200210 Lubricants, Industrial Oils And Related Products Type M (Metal Removal Fluids) – Specification
Automotive Historical
2002-10-25
J1002_200210 Seals–Evaluation Of Elastohydrodynamic
Automotive Current
2002-10-25
J1958_200210 Diesel Engines—Steel Tubes For High-Pressure Fuel Injection Pipes (Tubing)
Automotive Historical
2002-10-25
J1954_200210 Guide To The Application And Use Of Passenger Car Air-Conditioning Compressor Face Seals
Automotive Current
2002-10-25
J654_200210 Static And Reciprocating Elastomeric Transmission Seals
Automotive Current
2002-10-25
J1666_200210 Electric Vehicle Acceleration, Gradeability, And Deceleration Test Procedure
Automotive Current
2002-10-25
J111_200210 Seals–Terminology Of Radial Lip
Automotive Current
2002-10-25
J347_200210 Diesel Fuel Injector Assembly Type 7 (9.5 Mm)
Automotive Historical
2002-10-25
J780_200210 Engine Coolant Pump Seals
Automotive Current
2002-10-25
J946_200210 Application Guide To Radial Lip Seals
Automotive Current
2002-10-25
J1082_200210 Fuel Economy Measurement Road Test Procedure
Automotive Historical
2002-10-25
J1245_200210 Guide To The Application And Use Of Engine Coolant Pump Face Seals
Automotive Current
2002-10-25
J1256_200210 Fuel Economy Measurement–Road Test Procedure–Cold Start And Warm-Up Fuel Economy
Automotive Current
2002-10-25
J1491_200210 Vehicle Acceleration Measurement
Automotive Historical
2002-10-25
J1418_200210 Fuel Injection Pumps—High Pressure Pipes (Tubing) For Testing
Automotive Historical
2002-10-25
J120_200210 Rubber Rings For Automotive Applications
Automotive Current
2002-10-25
J1634_200210 Electric Vehicle Energy Consumption And Range Test Procedure
Automotive Historical
2002-10-25
AMS4946 Titanium Alloy Tubing, Seamless, Hydraulic 3Al – 2.5V, Texture Controlled Cold Worked, Stress Relieved
Aerospace Historical
2002-10-24
AMS2772C Heat Treatment Of Aluminum Alloy Raw Materials
Aerospace Historical
2002-10-24
AMS2770F Heat Treatment Of Wrought Aluminum Alloy Parts
Aerospace Historical
2002-10-24
AMS5333E Steel, Investment Castings 0.50Cr – 0.55Ni – 0.25Mo (0.11 – 0.17C) (SAE 8615) Normalized
Aerospace Historical
2002-10-22
AMS5334G Steel, Investment Castings 0.50Cr – 0.55Ni – 0.20Mo (0.25 – 0.35C) (SAE 8630 Mod) Normalized And Tempered
Aerospace Historical
2002-10-22
AMS4952B Titanium Alloy, Welding Wire 6AI – 2Sn – 4Zr – 2Mo
Aerospace Historical
2002-10-22
AMS6308C Steel, Bars And Forgings 0.90Si – 1.0Cr – 2.0Ni – 3.2Mo – 2.0Cu – 0.10V (0.07 – 0.13C) Vacuum Arc Or Electroslag Remelted
Aerospace Historical
2002-10-22
AMS4971F Titanium Alloy, Bars, Wire, Forgings, And Rings 6Al – 6V – 2Sn Annealed, Heat Treatable
Aerospace Historical
2002-10-22
AMS2485J Coating, Black Oxide
Aerospace Historical
2002-10-22
AMS4992 Castings, Structural Investment, Titanium Alloy 6Al – 4V Hot Isostatically Pressed
Aerospace Historical
2002-10-22
AMS2438B Plating, Chromium Thin, Hard, Dense Deposit
Aerospace Historical
2002-10-22
AIR4567A Military Composite Electrical Connectors
Aerospace Historical
2002-10-21
J1669_200210 Passenger Compartment Air Filter Test Code
Automotive Current
2002-10-21
J1669/2_200210 SAE Passenger Compartment Air Filter Test Code–Test Method For Gas Removing Filters
Automotive Current
2002-10-21
J1936_200210 Chemical Methods For The Measurement Of Nonregulated Diesel Emissions
Automotive Current
2002-10-21
J1937_200210 Engine Testing With Low-Temperature Charge Air-Cooler Systems In A Dynamometer Test Cell
Commercial Historical
2002-10-21
J35_200210 Diesel Smoke Measurement Procedure
Automotive Current
2002-10-21
J177_200210 Measurement Of Carbon Dioxide, Carbon Monoxide, And Oxides Of Nitrogen In Diesel Exhaust
Automotive Current
2002-10-21
J1003_200210 Diesel Engine Emission Measurement Procedure
Automotive Current
2002-10-21
J1045_200210 Instrumentation And Techniques For Vehicle Refueling Emissions Measurement
Automotive Current
2002-10-21
J1030_200210 Maximum Sound Level For Passenger Cars And Light Trucks
Automotive Current
2002-10-21
J1243_200210 Diesel Emission Production Audit Test Procedure
Automotive Current
2002-10-21
J1506_200210 Emission Test Driving Schedules
Automotive Current
2002-10-21
J1280_200210 Determination Of Sulfur Compounds In Automotive Exhaust
Automotive Current
2002-10-21
AMS4987B Titanium Alloy, Forgings 10V – 2Fe – 3Al Consumable Electrode Melted, Single Solution Heat Treated And Overaged 140 Ksi (965 MPa) Tensile Strength
Aerospace Historical
2002-10-21
AMS4983C Titanium Alloy, Forgings 10V – 2Fe – 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated And Aged 180 Ksi (1241 MPa) Tensile Strength
Aerospace Historical
2002-10-21
J1145_200210 Emissions Terminology And Nomenclature
Automotive Historical
2002-10-21
J255_200210 Diesel Engine Smoke Measurement
Automotive Current
2002-10-21
J215_200210 Continuous Hydrocarbon Analysis Of Diesel Emissions
Automotive Current
2002-10-21
J435_200210 Automotive Steel Castings
Automotive Historical
2002-10-10
J2494/2_200210 Dimensional Specifications For Non-Metallic Body Push-To-Connect Fittings Used On A Vehicular Air Brake System
Commercial Historical
2002-10-04
J2337/3_200210 Connections For Fluid Power And High Pressure Use-Ports, Stud Ends, And Plugs With Iso 261 Threads And O-Rings Sealing-Part 3: Port Plug Requirements, Dimensions, Design, And Test Methods
Automotive Historical
2002-10-04
J2337/1_200210 Connections For Fluid Power And High Pressure Use-Ports, Stud Ends, And Plugs With Iso 261 Threads And O-Ring Sealing-Part 1: Ports With Recessed Conical Seat Requirements, Dimensions, Design, And Test Methods
Automotive Historical
2002-10-04
J2337/2_200210 Connections For Fluid Power And High Pressure Use – Ports, Stud Ends, And Plugs With Iso 261 Threads And O-Rings Sealing – Part 2: Stud End Requirements, Dimensions, Design And Test Methods
Automotive Historical
2002-10-04
J240_200210 Life Test For Automotive Storage Batteries
Automotive Historical
2002-10-04
J2334_200210 Cosmetic Corrosion Lab Test
Automotive Historical
2002-10-04
J2600_200210 Compressed Hydrogen Surface Vehicle Refueling Connection Devices
Automotive Historical
2002-10-04
AS90335 CONNECTOR, RECEPTACLES, PLUGS, ADAPTOR, EL, EMBEDDED, PRINTED CIRCUIT BOARD LAMP LIGHTING PANELS
Aerospace Historical
2002-10-02
AS7101B NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM
Aerospace Historical
2002-10-01
AGS3600-4 AGS3600-699 Insert, Screw Thread, Unified, Screw Locking, Helical Coil, Corrosion Resistant Steel DTD734. Cad. Plated
Aerospace Current
2002-10-01
AS2177-9 AS2177 Adjusting Wheel (Rudder Bar)
Aerospace Current
2002-10-01
J2627_200209 Commercial Vehicle Braking System Definitions
Commercial Historical
2002-09-30
J2317_200209 Tamper Resistance For Adjustable Parameters On Diesel Fuel Injection Pumps
Automotive Historical
2002-09-30
J2584_200209 Headlamp Mounting Height For Passenger And Pickup Truck Vehicles
Automotive Historical
2002-09-30
J941_200209 Motor Vehicle Drivers’ Eye Locations
Automotive Historical
2002-09-30
J855_200209 Test Method Of Stretch And Set Of Textiles And Plastics
Automotive Historical
2002-09-30
AS27640B BEARING, BALL, AIRFRAME, ANTI-FRICTION, HEAVY DUTY
Aerospace Historical
2002-09-23
AS5488 Regional Aircraft Towbar Attach Fitting Interface
Aerospace Historical
2002-09-20
J1119_200209 Steel Products For Rollover Protective Structures (ROPS) And Falling Object Protective Structures (FOPS)
Commercial Historical
2002-09-20
J2711_200209 Recommended Practice For Measuring Fuel Economy And Emissions Of Hybrid-Electric And Conventional Heavy-Duty Vehicles
Commercial Historical
2002-09-20
J2245_200209 Recommended Practice For Splash And Spray Evaluation
Commercial Historical
2002-09-19
AIR5504 Aircraft Inflight Icing Terminology
Aerospace Historical
2002-09-17
J380_200209 Specific Gravity Of Friction Material
Automotive Historical
2002-09-17
AS9558A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
Aerospace Historical
2002-09-13
AS9559A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A
Aerospace Historical
2002-09-13
AS9556A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
Aerospace Historical
2002-09-13
J1297_200209 Alternative Automotive Fuels
Automotive Historical
2002-09-13
J2044_200209 Quick Connect Coupling Specification For Liquid Fuel And Vapor/Emissions Systems
Automotive Historical
2002-09-13
AS1036F FITTING, CROSS, STANDARD AND REDUCER, FLARED
Aerospace Historical
2002-09-12
ARP1281C Actuators: Aircraft Flight Controls, Power Operated, Hydraulic, General Specification For
Aerospace Current
2002-09-12
AS27645B BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, LIGHT AND HEAVY DUTY
Aerospace Historical
2002-09-11
AMS7880B Tungsten Carbide-Cobalt Powder Sintered And Crushed
Aerospace Historical
2002-09-10
USCAR23 ROAD VEHICLES – 60 V AND 600 V SINGLE CORE (ISO/METRIC) CABLES – DIMENSIONS, TEST METHODS AND REQUIREMENTS
Automotive Historical
2002-09-09
J2020_200209 Accelerated Exposure Of Automotive Exterior Materials Using A Fluorescent UV And Condensation Apparatus
Automotive Historical
2002-09-06
J2591_200209 Adaptive Forward Lighting System
Automotive Historical
2002-09-05
J1084_200209 Operator Protective Structure Performance Criteria For Certain Forestry Equipment
Commercial Historical
2002-09-05
AS24585A SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS
Aerospace Historical
2002-09-05
AMSSTD1595A Qualification Of Aircraft, Missile And Aerospace Fusion Welders
Aerospace Current
2002-09-04
AMSS18728A Steel Plate, Sheet And Strip, Alloy 8630, Aircraft Quality
Aerospace Historical
2002-09-04
AMSS6049A Steel, Chrome-Nickel-Molybdenum (8740) Bars And Reforging Stock (Aircraft Quality)
Aerospace Historical
2002-09-04
AMSS6709A Steel, Chrome-Molybdenum-Aluminum; Bars, Rods, Billets And Forging Stock (For Nitriding) (Aircraft Quality)
Aerospace Current
2002-09-04
AMSS7952A Steel, Sheet And Strip, Uncoated, Carbon (1020 And 1025) (Aircraft Quality)
Aerospace Current
2002-09-04
AMSS7947A Steel, Sheet And Strip (1095) (Aircraft Quality)
Aerospace Historical
2002-09-04
AMSSTD2219A Fusion Welding For Aerospace Applications
Aerospace Current
2002-09-04
AMSS8949A Steel Bars, Plates, Sheets, Billets, And Reforging Stock Type D6AC
Aerospace Historical
2002-09-04
AMSS8840A Steel Sheet And Strip, Corrosion-Resistant, Precipitation Hardening (Am350 And Am355), Premium Quality
Aerospace Current
2002-09-04
AMSS8503A Steel Bars, Chrome-Vanadium (6150), Aircraft Quality
Aerospace Current
2002-09-04
AMSS8690A Steel, Chrome-Nickel-Molybdenum, 8620, Bars Aircraft Quality
Aerospace Current
2002-09-04
AMST8506A Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless And Welded
Aerospace Historical
2002-09-04
AMS5705E Steel, Corrosion And Heat Resistant, Bars And Forgings 2.5si 12.5si 8.0ni Annealed
Aerospace Current
2002-09-04
AMS6260N Steel, Bars, Forgings, And Tubing 1.2Cr – 3.2Ni – 0.12Mo (0.07 – 0.13C) (SAE 9310)
Aerospace Historical
2002-09-04
AMS6484B Steel, Bars, Forgings, And Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) SAE 4340 Normalized And Tempered
Aerospace Historical
2002-09-04
J1789_200208 Self-Propelled Sweepers And Scrubbers Braking Performance
Automotive Historical
2002-08-30
J1791_200208 Self-Propelled Sweepers And Scrubbers Dual Position Driving Controls And Displays
Automotive Historical
2002-08-30
ARINC424-16 NAVIGATION SYSTEM DATA BASE
Aerospace Current
2002-08-30
ARINC665-2 LOADABLE SOFTWARE STANDARDS
Aerospace Current
2002-08-30
J1939/71_200208 Vehicle Application Layer — J1939-71 (Through 1999)
Automotive Historical
2002-08-30
J2461_200208 Vehicle Electronic Programming Stations (VEPS) System Specification For Win32 TM
Commercial Historical
2002-08-29
J2194_200208 Roll-Over Protective Structures (ROPS) For Wheeled Agricultural Tractors
Commercial Historical
2002-08-29
J1307_200208 Excavator And Backhoe Hand Signals
Commercial Current
2002-08-29
J967_200208 Calibration Fluid For Diesel Injection Equipment
Automotive Historical
2002-08-29
J1113/13_200208 Electromagnetic Compatibility Measurement Procedure For Vehicle Components–Part 13: Immunity To Electrostatic Discharge
Automotive Historical
2002-08-27
J2708_200208 Agricultural Tractor Test Code (OECD)
Commercial Current
2002-08-26
J1911_200208 Test Procedure For Air Reservoir Capacity–Highway Type Vehicles
Automotive Historical
2002-08-23
J1609_200208 Air Reservoir Capacity Performance Guide–Commercial Vehicles
Commercial Historical
2002-08-23
J1792/2_200208 Self-Propelled Sweepers–Air Flow Performance–Part 2: Suction/Blower Fan Performance
Automotive Historical
2002-08-23
J682_200208 Rear Wheel Splash And Stone Throw Protection
Commercial Historical
2002-08-23
J1356_200208 Minimum Performance Criteria For Falling Object Guards For Excavators
Commercial Historical
2002-08-23
J974_200208 Flashing Warning Lamp For Agricultural Equipment
Commercial Historical
2002-08-22
AS85049/103 CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2002-08-22
J1052_200208 Motor Vehicle Driver And Passenger Head Position
Automotive Historical
2002-08-22
USCAR5-1 Avoidance Of Hydrogen Embrittlement Of Steel
Automotive Historical
2002-08-22
J167_200208 Overhead Protection For Agricultural Tractors–Test Procedures And Performance Requirements
Commercial Historical
2002-08-22
AMS5873D Nickel Alloy, Corrosion And Heat-Resistant, Sheet, Strip, And Plate 65Ni – 15.8Cr – 15.2Mo – 0.30Al – 0.05La Consumable Electrode Melted, Solution Heat Treated
Aerospace Historical
2002-08-21
AMS5409A Castings, Alloy-Investment, 61ni 16cr 8.5co 1.8mo 2.6w 0.8cb 3.4ti 1.8ta 3.4al 0.010b 0.06zr (0.03-0.08c), Vacuum Melted, Vacuum Cast, As Cast
Aerospace Current
2002-08-21
AMS3603A Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, For Aircraft Exterior Applications
Aerospace Current
2002-08-21
AMS4001H Aluminum Sheet And Plate 0.12Cu (1100-0) Annealed
Aerospace Historical
2002-08-21
AMS5776E Steel, Corrosion And Heat-Resistant, Welding Wire 12.5Cr (SAE 51410)
Aerospace Historical
2002-08-21
AMS4044J Aluminum Alloy, Sheet And Plate 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-0) Annealed
Aerospace Historical
2002-08-21
AMS5660J Nickel-Iron Alloy, Corrosion And Heat-Resistant, Bars And Forgings 12.5Cr – 42.5Ni – 6.0Mo – 2.7Ti – 0.015B – 34Fe Consumable Electrode Or Vacuum Induction Melted Solution, Stabilization, And Precipitation Heat Treated
Aerospace Historical
2002-08-21
AMS5786E Nickel Alloy, Corrosion And Heat-Resistant, Welding Wire 62.5Ni – 5.0Cr – 24.5Mo – 5.5Fe
Aerospace Historical
2002-08-21
AMS2685D Welding, Tungsten Arc, Inert Gas (GTAW Method)
Aerospace Historical
2002-08-21
AMS5706K Nickel Alloy, Corrosion And Heat-Resistant, Bars, Forgings, And Rings 57Ni – 19.5Cr – 13.5Co – 4.3Mo – 3.0Ti – 1.4AI – 0.006B – 0.05Zr Consumable Electrode Or Vacuum Induction Melted 1825 To 1900 °F Solution Heat Treated
Aerospace Historical
2002-08-21
AMS5754L Nickel Alloy, Corrosion And Heat-Resistant, Bars, Forgings, And Rings 47.5Ni – 22Cr – 1.5Co – 9.0Mo – 0.60W – 18.5Fe Solution Heat Treated
Aerospace Historical
2002-08-21
AMS6456C Steel, Welding Wire 0.80Cr – 1.8Ni – 0.25Mo (0.35 – 0.40C) (SAE 4340 Mod) Vacuum Melted, Environment-Controlled Packaging
Aerospace Historical
2002-08-20
MS1010_200208 Lubricants, Industrial Oils, And Related Products Type T Turbine Oils – Specification
Automotive Historical
2002-08-20
J1247_200208 Simulated Mountain-Brake Performance Test Procedure
Automotive Historical
2002-08-20
AMS7878C Tungsten Carbide Powder, Cobalt Coated
Aerospace Current
2002-08-20
AMS6462H Steel, Welding Wire 0.95Cr – 0.20V (0.28 – 0.33C) (SAE 6130)
Aerospace Historical
2002-08-20
AMS4920C Titanium Alloy, Forgings 6Al – 4V Alpha-Beta Or Beta Processed, Annealed
Aerospace Historical
2002-08-20
AMS4982C Titanium Alloy Wire 44.5 Cb
Aerospace Historical
2002-08-20
AMS6428F Steel, Bars, Forgings, And Tubing 0.80Cr-1.8Ni-0.35Mo-0.20V(0.32-0.38C) (4335 Modified)
Aerospace Historical
2002-08-20
AMS6479A Steel, Bars, Forgings, And Tubing 1.45Cr (0.98 – 1.10C) (SAE 52100) Special Aircraft-Quality Cleanliness
Aerospace Historical
2002-08-20
AMS6265K Steel, Bars, Forgings, And Tubing 1.2Cr – 3.25Ni – 0.12Mo (0.07 – 0.13C) (SAE 9310) Vacuum Consumable Electrode Remelted
Aerospace Historical
2002-08-20
ARP4386B Terminology And Definitions For Aerospace Fluid Power, Actuation And Control Technologies
Aerospace Historical
2002-08-15
AIR1176B Oxygen System And Component Cleaning And Packaging
Aerospace Current
2002-08-13
J1099_200208 Technical Report On Low Cycle Fatigue Properties Ferrous And Non-Ferrous Materials
Automotive Historical
2002-08-13
AIR4713 Aerospace – Chlorinated Solvent Contamination Of MIL-H-5606/MIL-H-83282 Vehicle Hydraulic Systems
Aerospace Historical
2002-08-08
AS6625A Spray Equipment, Aircraft Windshield, Anti-Icing
Aerospace Current
2002-08-08
AS8181A Detector, Ice, Air Intake Duct, Aircraft Engines And Airframe Systems, General Specification For
Aerospace Current
2002-08-07
J1137_200208 Hydraulic Valves For Motor Vehicle Brake Systems–Performance Requirements
Automotive Historical
2002-08-07
J1118_200208 Hydraulic Valves For Motor Vehicle Brake Systems Test Procedure
Automotive Historical
2002-08-07
ARP1625A Cold Gas Systems, Missile Or Projectiles Design, Installation, Tests And Requirements For
Aerospace Historical
2002-08-05
J2628_200208 Characterization, Conducted Immunity
Automotive Historical
2002-08-05
AMS3265B Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Nonchromated Corrosion Inhibiting For Intermittent Use To 360 °F (182 °C)
Aerospace Historical
2002-08-05
J1339_200208 Test Method For Measuring Performance Of Engine Cooling Fans
Automotive Historical
2002-08-05
J1739_200208 Potential Failure Mode And Effects Analysis In Design (Design FMEA) And Potential Failure Mode And Effects Analysis In Manufacturing And Assembly Processes (Process FMEA) And Effects Analysis For Machinery (Machinery FMEA)
Automotive Historical
2002-08-02
ARP584B Coiled Tubing, Corrosion Resistant Steel, Hydraulic Applications, Aerospace
Aerospace Historical
2002-08-01
EIA731_1 Systems Engineering Capability Model
Aerospace Historical
2002-08-01
EIA731_2 Systems Engineering Capability Model Appraisal Method
Aerospace Historical
2002-08-01
J1228_200208 Small Craft–Marine Propulsion Engine And Systems–Power Measurements And Declarations
Automotive Historical
2002-08-01
ARP1280A Aerospace – Application Guide For Hydraulic Power Transfer Units
Aerospace Historical
2002-07-30
AS586A Wheel And Brake (Sand And Permanent Mold) Castings – Minimum Requirements For Aircraft Applications
Aerospace Historical
2002-07-30
AMS6257C Steel Bars, Forgings, And Tubing 1.6Si – 0.82Cr – 1.8Ni – 0.40Mo – 0.08V (0.40 – 0.44C) Consumable Electrode Vacuum Remelted Normalized And Tempered
Aerospace Historical
2002-07-30
AMST9046A Titanium And Titanium Alloy, Sheet, Strip, And Plate
Aerospace Historical
2002-07-30
AMS3277B Sealing Compound, Polythioether Rubber Fuel Resistant, Fast Curing Intermittent Use To 360 °F (182 °C)
Aerospace Historical
2002-07-30
AMS4901N Titanium Sheet, Strip, And Plate Commercially Pure Annealed, 70.0 Ksi (485 MPa)
Aerospace Historical
2002-07-29
J2494/4_200207 Cartridge Cavity
Commercial Historical
2002-07-26
J1792/1_200207 Self-Propelled Sweepers–Air Flow Performance–Part 1: Suction Air Volume Performance
Automotive Historical
2002-07-26
J912_200207 Test Method For Determining Blocking Resistance And Associated Characteristics Of Automotive Trim Materials
Automotive Historical
2002-07-26
J2494/3_200207 Performance Requirements For SAE J 844 Non-Metallic Air Brake Tubing And Push To Connect Fitting Assemblies Used In Vehicular Air Brake Systems
Commercial Historical
2002-07-26
J1702_200207 Self-Propelled Sweepers Sweep-Ability Performance
Automotive Historical
2002-07-26
ARP4378 Accumulators, Hydraulic, Cylindrical, Aircraft, Maintenance Free, Factory Precharged
Aerospace Historical
2002-07-25
J2058_200207 Chrysler Sensor And Control (CSC) Bus Multiplexing Network For Class ‘A’ Applications
Automotive Current
2002-07-25
J2540/1_200207 RDS Phrase Lists
Automotive Historical
2002-07-25
J2106_200207 Token Slot Network For Automotive Control
Automotive Current
2002-07-25
MS1009_200207 Lubricants, Industrial Oils, And Related Products Type P Pneumatic Tool Oils – Specification
Automotive Historical
2002-07-25
AMS4932A Titanium Alloy Sheet 6Al – 4V Driver Sheet
Aerospace Historical
2002-07-25
AMS7897C Tungsten Forgings, Pressed, Sintered, And Forged
Aerospace Current
2002-07-25
J2540_200207 Messages For Handling Strings And Look-Up Tables In ATIS Standards
Automotive Historical
2002-07-25
AMS4048J Aluminum Alloy Sheet And Plate, Alclad 5.6Zn – 2.5Mg – 1.6Cu – 0-23Cr (Alclad 7075-0) Annealed
Aerospace Historical
2002-07-25
J1724_200207 Vehicle Electronic Identification
Automotive Current
2002-07-23
J1358_200207 Hydraulic Backhoe Basic Operating Control Arrangements
Commercial Current
2002-07-23
J1408_200207 Definitions And Glossary Of Terms For Tower Cranes
Commercial Current
2002-07-23
MAM2203 TOLERANCES, METRIC Aluminum Alloy Drawn Tubing
Aerospace
2002-07-23
AMSTST2663 Filler Metal, Silver, Brazing 56ag – 22cu – 17zn – 5sn – 1152 -1203 F (622 – 651 C) Solidus-Liquidus
Aerospace Current
2002-07-23
J2257_200207 Brake Lining Shear Testing-See J840
Automotive Current
2002-07-23
MAM7211 COTTER PINS, METRIC, STEEL, CORROSION AND HEAT RESISTANT 18Cr – 10.5Ni – 0.40Ti
Aerospace
2002-07-23
AS33 NUTS, PLAIN HEXAGON Aircraft Engine
Aerospace Current
2002-07-23
ARP788 Procedure For The Determination Of The Silting Index Of A Fluid
Aerospace Current
2002-07-23
ARP296 Terminal, High Altitude, Socket Contact
Aerospace Current
2002-07-23
AIR877B Aerospace-Particle Count Data Conversion And Extrapolation
Aerospace Historical
2002-07-23
AS1520 AREAS FOR CALCULATING STRESS OR LOAD VALUES FOR METRIC MJ EXTERNALLY THREADED FASTENERS
Aerospace Current
2002-07-23
AS509 TERMINOLOGY GUIDE FOR AIRCRAFT GAS TURBINE ENGINES
Aerospace Historical
2002-07-23
AS4828 Technical Manual Development For Ground Support Equipment
Aerospace Historical
2002-07-23
AMS3726/2B Shims, Filled Resin Compound Precatalyzed Sheet
Aerospace Current
2002-07-23
AMS4906 Titanium Alloy Sheet And Strip 6al – 4v Continuously Rolledannealeduns R56400)
Aerospace Current
2002-07-23
AMS7898D Tungsten Sheet, Strip, Plate, And Foil, Pressed, Sintered, And Wrought
Aerospace Current
2002-07-23
AMSQQS700A Steel, Sheet And Strip, Medium And High Carbon
Aerospace Historical
2002-07-23
AMS1432 FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS Potassium Acetate Base
Aerospace Historical
2002-07-23
AMS2268A Chemical Check Analysis Limits Cast Nickel And Nickel Alloys
Aerospace Current
2002-07-23
AMS4936E Titanium Alloy, Extrusions And Flash Welded Rings, 6al 6v 2sn, Beta Extruded Plus Annealed, Heat Treatable
Aerospace Current
2002-07-23
AMS4974D Titanium Alloy, Bars And Forgings, 11sn 5.0zr 2.3al 1.0mo 0.21si, Solution And Precipitation Heat Treated
Aerospace Current
2002-07-23
AMS4996B Billets And Preforms, 6al 4v, Premium Quality, Powder-Metallurgy Product
Aerospace Current
2002-07-23
AMS1730 UREA COMPOUND, SHOTTED
Aerospace Historical
2002-07-23
AMSS8559A Steel Bars, Carbon, AISI (1095), Aircraft Quality
Aerospace Historical
2002-07-23
AMS4950A Titanium Alloy, Bars, Wire, Forgings, And Rings 6.0Al – 4.0V Solution Heat Treated And Aged Modified Strength
Aerospace Historical
2002-07-23
AMS4965H Titanium Alloy, Bars, Wire, Forgings, And Rings 6.0Al – 4.0V Solution Heat Treated And Aged
Aerospace Historical
2002-07-23
J1757/1_200207 Standard Metrology For Vehicular Displays
Automotive Historical
2002-07-18
J2408_200207 Clutch Requirements For High-Torque Truck And Bus Engines
Automotive Historical
2002-07-17
J551/15_200207 Vehicle Electromagnetic Immunity–Electrostatic Discharge (ESD)
Automotive Historical
2002-07-17
J314_200207 Felts–Wool And Part Wool
Automotive Historical
2002-07-17
AIR744B Aerospace Auxiliary Power Sources
Aerospace Historical
2002-07-16
AIR4652 Design Factors – Handicapped Passenger Boarding Devices
Aerospace Historical
2002-07-16
ARP1348A Baggage/Cargo Trailer Requirements
Aerospace Historical
2002-07-16
ARP4553 Accumulator, Hydraulic, Cylindrical Aircraft, Self-Displacing
Aerospace Historical
2002-07-16
AS9133 Qualification Procedure For Aerospace Standard Parts
Aerospace Historical
2002-07-16
AS1182B Standard Machining Allowance Aircraft-Quality And Premium Aircraft-Quality Steel Bars And Mechanical Tubing
Aerospace Historical
2002-07-16
AS5385A Cargo Restraint Straps – Design Criteria And Testing Methods
Aerospace Historical
2002-07-15
ARP4404A Aircraft Electrical Installations
Aerospace Historical
2002-07-15
AS1859A Fitting End, Non-Reversible, Straight Thread, Boss Connection
Aerospace Current
2002-07-15
AS1858A Fitting End, Non-Reversible, Flared Tube Connection, Oversize Thread
Aerospace Current
2002-07-15
AS1857A Fitting End, Non-Reversible, Flareless Tube Connection, Oversize Thread
Aerospace Current
2002-07-15
AS1856A Installation, Non-Reversible Fitting End
Aerospace Current
2002-07-15
AS1861A Nut, Sleeve Coupling, Tube Reducer, Flared
Aerospace Current
2002-07-15
AS1860A Nut, Sleeve Coupling, Tube Reducer, Flareless
Aerospace Current
2002-07-15
J2484_200207 Fastener Part Standard–Machine Screws
Commercial Historical
2002-07-12
J1849_200207 Emergency Vehicle Sirens
Automotive Historical
2002-07-11
J1100_200207 Motor Vehicle Dimensions
Automotive Historical
2002-07-11
J1887_200207 Automotive Compacted Graphite Iron Castings
Automotive Historical
2002-07-08
J2520_200207 Classification, Nomenclature, And Specification Definitions For Directional Drilling Tracking Equipment
Automotive Historical
2002-07-03
ARP4945 Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting
Aerospace Historical
2002-07-02
J578_200207 Color Specification
Automotive Historical
2002-07-01
ARINC627-2 PROGRAMMERS GUIDE FOR SMART SYSTEMS USING ARINC 626 ATLAS
Aerospace Current
2002-06-30
J2583_200206 Directional Drilling Planning And Mapping Nomenclature
Automotive Historical
2002-06-28
J1858_200206 Full Flow Lubricating Oil Filters Multipass Method For Evaluating Filtration Performance
Automotive Current
2002-06-27
AMS6450G Steel, Spring Wire And Springs 0.95Cr – 0.22V (0.48 – 0.53C) (SAE 6150) Annealed And Cold Drawn
Aerospace Historical
2002-06-27
AIR5487 Aircraft Tire History
Aerospace Historical
2002-06-27
J726_200206 Air Cleaner Test Code
Multiple Current
2002-06-27
AMS2809 Identification Titanium And Titanium Alloy Wrought Products
Aerospace Historical
2002-06-27
AMS2451/4A Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
Aerospace Historical
2002-06-26
AMS5112K Carbon Steel, Wire And Springs Spring Quality Music Wire 0.70 – 1.00C Cold Drawn
Aerospace Historical
2002-06-26
AMS2401G Plating, Cadmium Low Hydrogen Content Deposit
Aerospace Historical
2002-06-26
AMS2416J Plating, Nickel-Cadmium Diffused
Aerospace Historical
2002-06-26
AMS2400V Plating, Cadmium
Aerospace Historical
2002-06-26
AS21428B BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, PRECISION
Aerospace Historical
2002-06-25
AS27642B BEARING, BALL, AIRFRAME, EXTRA LIGHT DUTY
Aerospace Historical
2002-06-25
AS27648B BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTERNAL SELF ALIGNING, EXTRA LIGHT DUTY
Aerospace Historical
2002-06-25
AS27649B BEARING, BALL, AIRFRAME, ANTIFRICTION, INTERMEDIATE DUTY
Aerospace Historical
2002-06-25
AS27641B BEARING, BALL, AIRFRAME, ANTI-FRICTION, INTERMEDIATE DUTY
Aerospace Historical
2002-06-25
AS27643B BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, DOUBLE ROW, HEAVY DUTY
Aerospace Historical
2002-06-25
AS27646B BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY
Aerospace Historical
2002-06-25
AS27647B BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA WIDE, DOUBLE ROW, INTERMEDIATE DUTY
Aerospace Historical
2002-06-25
AS7117 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR SHOT PEENING, PEEN FORMING, GLASS BEAD PEENING
Aerospace Historical
2002-06-25
AS27644B BEARING, BALL, AIRFRAME, ANTI-FRICTION, DOUBLE ROW, HEAVY DUTY
Aerospace Historical
2002-06-25
J20/1_200206 Coolant Hose (Supplement To SAE J20 For Government Use Replacing Part Of Ms52130)
Automotive Historical
2002-06-20
AMS6474 Forgings, Hardenable Steels And Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength And Fracture Toughness
Aerospace Historical
2002-06-19
J1453_200206 Fitting–O-Ring Face Seal
Automotive Historical
2002-06-19
AS85049/104 CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, 45°, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2002-06-14
AS85049/105 CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2002-06-14
ARP711A Illuminated Signs
Aerospace Historical
2002-06-14
AMS4991C Titanium Alloy Castings, Investment 6Al – 4V Hot Isostatic Pressed, Anneal Optional
Aerospace Historical
2002-06-14
AMS4975H Titanium Alloy, Bars, Wire, And Rings 6.0Al – 2.0Sn – 4.0Zr – 2.0Mo – 0.08Si Solution And Precipitation Heat Treated
Aerospace Historical
2002-06-14
AS3563A NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 Ksi, 800 °F, UNS S66286
Aerospace Historical
2002-06-12
AS3564A NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, COUNTERBORED, 160 Ksi, 800 °F, UNS S66286
Aerospace Historical
2002-06-12
AS3486B NUT, SELF-LOCKING, EXTENDED DOUBLE HEXAGON, REDUCED FLANGE, DRY FILM LUBE, UNS S66286, CLASS: 160 Ksi/800 °F
Aerospace Historical
2002-06-12
J2233_200206 Bus Body Heating System Test
Commercial Historical
2002-06-07
J2519_200206 Guidelines And Procedures For Directional Drilling Tracking Operators
Automotive Historical
2002-06-06
J826_200206 Devices For Use In Defining And Measuring Vehicle Seating Accommodation
Automotive Historical
2002-06-01
J1652_200205 Dynamometer Effectiveness Characterization Test For Passenger Car And Light Truck Caliper Disc Brake Friction Materials
Automotive Current
2002-05-31
J2224_200205 Identification Of Truck, Trailer, And Bus Wheel Seals And Associated Packaging
Commercial Historical
2002-05-31
USCAR21 Performance Specification For Cable-To-Terminal Electrical Crimps
Automotive Historical
2002-05-31
J882_200205 Test Method For Measuring Thickness Of Automotive Textiles And Plastics
Automotive Historical
2002-05-31
J1942/1_200205 Qualified Hoses For Marine Applications
Automotive Historical
2002-05-30
J1940_200205 Small Engine Power And Torque Rating Procedure
Commercial Historical
2002-05-29
AMS2644C Inspection Material, Penetrant
Aerospace Historical
2002-05-29
AS85049/114 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2002-05-21
AS85049/112 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2002-05-21
AS85049/115 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2002-05-21
AS85049/117 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2002-05-21
AS85049/109 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, NON-SELF LOCKING AND SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SERIES I & II), AS81703 SERIES III, AND MIL-C-26482 SERIES II CONNECTORS)
Aerospace Historical
2002-05-21
ARP599C Aerospace – Dynamic Test Method For Determining The Relative Degree Of Cleanliness Of The Downstream Side Of Filter Elements
Aerospace Historical
2002-05-21
AS85049/111 CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SERIES I & II), AS81703 SERIES III, AND MIL-C-26482 SERIES II CONNECTORS)
Aerospace Historical
2002-05-21
MS1001_200205 Lubricants, Industrial Oils, And Related Products Type A Lubricant For General Purpose And Total Loss Systems — Specification
Automotive Historical
2002-05-17
ARINC666 ELECTRONIC DISTRIBUTION OF SOFTWARE
Aerospace Current
2002-05-17
AS85896 Ladder, Aircraft Maintenance, Aluminum, Three-Way Combination (Step, Straight And Extension), General Specification For
Aerospace Historical
2002-05-10
J2365_200205 Calculation Of The Time To Complete In-Vehicle Navigation And Route Guidance Tasks
Automotive Historical
2002-05-10
J20/1_200205 Coolant Hose (Supplement To SAE J20 For Government Use Replacing Part Of MS52130)
Automotive Historical
2002-05-10
AS9219A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A
Aerospace Historical
2002-05-08
AS5205A NUT, FITTING, ENGINE, FLARED
Aerospace Historical
2002-05-08
AIR4978B Temporary Methods For Assessing The Load Carrying Capacity Of Aircraft Propulsion System Lubricating Oils
Aerospace Historical
2002-05-08
AS9208A BOLT, MACHINE – STEEL, DIFFUSED NICKELCADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A
Aerospace Historical
2002-05-08
J1981_200205 Road Hazard Impact Test For Wheel And Tire Assemblies (Passenger Car, Light Truck, And Multipurpose Vehicles)
Automotive Historical
2002-05-08
ARP5316A Storage Of Elastomer Seals And Seal Assemblies Which Include An Elastomer Element Prior To Hardware Assembly
Aerospace Historical
2002-05-08
ARINC615-4_ER2 AIRBORNE COMPUTER HIGH SPEED DATA LOADER
Aerospace Current
2002-05-06
AMS2700A Passivation Of Corrosion Resistant Steels
Aerospace Historical
2002-05-03
AS5457 Aerospace Standard For Hand-Held Wire Stripper Tools
Aerospace Historical
2002-05-02
J2227_200204 International Tests And Specifications For Automotive Engine Oils
Automotive Historical
2002-04-30
J2623_200204 Standard Rainflow File Format
Automotive Historical
2002-04-30
J551/1_200204 Performance Levels And Methods Of Measurements Of Electromagnetic Compatibility Of Vehicles, Boats (Up To 15 M), And Machines (50 Hz To 18 GHz)
Automotive Historical
2002-04-30
J2610_200204 Serial Data Communication Interface
Automotive Historical
2002-04-30
J1962_200204 Diagnostic Connector Equivalent To ISO/DIS 15031-3:December 14, 2001
Automotive Historical
2002-04-30
J1978_200204 OBD II Scan Tool — Equivalent To ISO/DIS 15031-4:December 14, 2001
Automotive Historical
2002-04-30
J1113/1_200204 Electromagnetic Compatibility Measurement Procedures And Limits For Components Of Vehicles, Boats (Up To 15 M), And Machines (Except Aircraft) (50 Hz To 18 Ghz)
Multiple Historical
2002-04-30
J1979_200204 E/E Diagnostic Test Modes — Equivalent To ISO/DIS 15031-5:April 30, 2002
Automotive Historical
2002-04-30
J1930_200204 Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, And Acronyms–Equivalent To ISO/TR 15031-2:April 30, 2002
Automotive Historical
2002-04-30
J2012_200204 Diagnostic Trouble Code Definitions Equivalent To ISO/DIS 15031-6:April 30, 2002
Automotive Historical
2002-04-30
AS5370 Multi-Transmitter Bidirectional Fiber-Optic Data Bus For Distributed Aircraft Control Systems
Aerospace Historical
2002-04-26
J2576_200204 Blade Fuses – 42 V System
Automotive Current
2002-04-24
AS9101A Quality System Assessment
Aerospace Historical
2002-04-24
AMS7902D Beryllium Sheet And Plate 98Be
Aerospace Historical
2002-04-22
AMS4921H Titanium Bars, Wire, Forgings, And Rings Commercially Pure 70 Ksi (483 MPa) Yield Strength
Aerospace Historical
2002-04-22
AMS4978D Titanium Alloy Bars, Wire, Forgings, And Rings 6Al – 6V – 2Sn Annealed
Aerospace Historical
2002-04-22
AMS2355G Quality Assurance, Sampling And Testing Aluminum Alloys And Magnesium Alloys Wrought Products, Except Forging Stock, And Rolled, Forged, Or Flash Welded Rings
Aerospace Historical
2002-04-22
AMS4958B Titanium Alloy Bars And Rods 3Al – 8V – 6Cr – 4Mo – 4Zr Consumable Electrode Melted Solution Heat Treated And Centerless Ground
Aerospace Historical
2002-04-22
AIR4246B Contaminants For Aircraft Turbine Engine Fuel System Component Testing
Aerospace Historical
2002-04-19
J18_200204 Sponge And Expanded Cellular Rubber Products
Automotive Historical
2002-04-19
ARP914B Glossary Of Electrical Connection Terms
Aerospace Current
2002-04-18
ARP862B Skid Control Performance
Aerospace Current
2002-04-17
ARP891A Determination Of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy Current)
Aerospace Historical
2002-04-17
J2282_200204 Distributed Lighting Systems (DLS)
Automotive Historical
2002-04-16
AIR1564A Materials For Fluid Systems Components And Their International Equivalents
Aerospace Historical
2002-04-16
USCAR3-2 Standard For Testing Automotive Miniature Bulbs
Automotive Historical
2002-04-15
USCAR14-1 Standards For Testing Automotive Halogen Light Sources
Automotive Historical
2002-04-15
J2366/7_200204 ITS Data Bus—Application Message Layer
Automotive Current
2002-04-12
J1942/1_200204 Qualified Hoses For Marine Applications
Automotive Historical
2002-04-12
J1406_200204 Application Of Hydraulic Brake Hose To Motor Vehicles
Automotive Historical
2002-04-09
J866_200204 Friction Coefficient Identification System For Brake Linings
Automotive Historical
2002-04-09
ARP9004 Direct Ship – Recommended Practices For Aerospace Companies
Aerospace Historical
2002-04-08
J2558_200204 Classification Systems For Thermoplastic Elastomers
Automotive Historical
2002-04-04
J1810_200204 Electrical Indicating System Specification
Commercial Historical
2002-04-02
AS9432A BOLT, TEE HEAD, CHAMFERED – CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
Aerospace Historical
2002-04-01
AS9398A BOLT, TEE HEAD, CHAMFERED – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
Aerospace Historical
2002-04-01
AS9433A BOLT, TEE HEAD, CHAMFERED – CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
Aerospace Historical
2002-04-01
AS9434A BOLT, TEE HEAD, CHAMFERED – CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
Aerospace Historical
2002-04-01
AIR825/5 Liquid Oxygen Systems
Aerospace Historical
2002-04-01
AIR825/12 Oxygen System Integration And Performance Precautions
Aerospace Historical
2002-04-01
MAM2355C Quality Assurance, Sampling And Testing Aluminum Alloys And Magnesium Alloys Wrought Products, Except Forging Stock, And Rolled, Forged, Or Flash Welded Rings
Aerospace Historical
2002-04-01
MAM2355D Quality Assurance, Sampling And Testing Aluminum Alloys And Magnesium Alloys Wrought Products, Except Forging Stock, And Rolled, Forged, Or Flash Welded Rings
Aerospace Historical
2002-04-01
AS85188 Riveter, Power, Pneumatic-Hydraulic Blind Rivet Installation
Aerospace Historical
2002-03-29
AS33700 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 12
Aerospace Historical
2002-03-29
AS21429 BEARING, ROLLER, ANTIFRICTION, ROD END, EXTERNAL THREAD, SELF-ALIGNING, AIR FRAME, -67°F, TO 350°F TYPE 1, HEAVY DUTY, SEALED
Aerospace Historical
2002-03-29
AS5127/1A Aerospace Standard Test Methods For Aerospace Sealants Two-Component Synthetic Rubber Compounds
Aerospace Historical
2002-03-29
AS5127A Methods For Testing Aerospace Sealants
Aerospace Historical
2002-03-29
J1783_200203 Ship Systems And Equipment–Selection Of Hydraulic Directional Control Valves
Commercial Historical
2002-03-28
J2388_200203 Secondary Control Modifications
Automotive Historical
2002-03-28
J1664_200203 Passenger Car And Light Truck Fuel Containment
Automotive Current
2002-03-26
J1976_200203 Outdoor Weathering Of Exterior Materials
Automotive Historical
2002-03-26
ARP1308C Preferred Electrical Connectors For Aerospace Vehicles And Associated Equipment
Aerospace Historical
2002-03-23
MA2126 Hose Assembly, Polytetrafluoroethylene (PTFE), Up To 232°C And 10 500 KPa Procurement Specification, Metric (ISO/DIS 10502)
Aerospace Historical
2002-03-23
AIR1557A High And Extended Vibration Environment
Aerospace Current
2002-03-23
ARP900A Methods For Evaluating Cryogenic Filters
Aerospace Historical
2002-03-23
ARP785A Aerospace – Procedure For The Determination Of Particulate Contamination In Hydraulic Fluids By The Control Filter Gravimetric Procedure
Aerospace Historical
2002-03-23
AS85421/4A FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH
Aerospace Historical
2002-03-22
AS85421/15A FITTING, ELBOW, 45°, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
Aerospace Historical
2002-03-22
AS85421/11A FITTING, UNION, BEAM SEAL, 3000/4000 PSI, MALE ENDS
Aerospace Historical
2002-03-22
AS85421/3A FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS
Aerospace Historical
2002-03-22
AS1424SUP1 Hose Assemblies, Metal, Medium Pressure, High Temperature (Supplement 1)
Aerospace Historical
2002-03-22
AS85421/13A FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
Aerospace Historical
2002-03-22
AS85421/12A FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, MALE TO MALE
Aerospace Historical
2002-03-22
AS85421/14A FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, MALE TO FEMALE
Aerospace Historical
2002-03-22
AS85421/17A FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON BRANCH, MALE ENDS
Aerospace Historical
2002-03-22
AS85421/5A FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND BRANCH, SWIVEL NUT ON RUN
Aerospace Historical
2002-03-22
AS5104 Plugs, Port Connection, Ring Locked, AS1300 Port, Installation And Removal Of
Aerospace Historical
2002-03-22
AS85421/16A FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON RUN, MALE ENDS
Aerospace Historical
2002-03-22
AS85421/10A FITTING, ADAPTER, BEAM SEAL, 3000/4000 PSI, MALE TO FLARELESS
Aerospace Historical
2002-03-22
J1961_200203 Accelerated Exposure Of Automotive Exterior MaterialsUsing A Solar Fresnel Reflector Apparatus
Automotive Historical
2002-03-22
AMS4241B Aluminum Alloy Castings 7.0Si – 0.58Mg – 0.15Ti – 0.06Be (D357.0-T6) Solution And Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
Aerospace Historical
2002-03-21
J2040_200203 Tail Lamps (Rear Position Lamps) For Use On Vehicles 2032 Mm Or More In Overall Width
Automotive Historical
2002-03-20
J2366/4_200203 ITS Data Bus—Thin Transport Layer
Automotive Current
2002-03-20
J2358_200203 Low Speed Vehicles
Multiple Historical
2002-03-20
AS9555A SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A
Aerospace Historical
2002-03-15
AS9576A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
Aerospace Historical
2002-03-15
AS9554A SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A
Aerospace Historical
2002-03-15
AS9464A PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
Aerospace Historical
2002-03-15
AS9575A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
Aerospace Historical
2002-03-15
AS5491B Calculation Of Electron Vacancy Number In Superalloys
Aerospace Historical
2002-03-15
AS9557A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
Aerospace Historical
2002-03-15
J1449_200203 Small Craft–Graphic Symbols
Commercial Historical
2002-03-15
J2284/3_200203 High-Speed CAN (HSC) For Vehicle Applications At 500 KBPS
Automotive Historical
2002-03-15
AMS2759/6A Gas Nitriding And Heat Treatment Of Low-Alloy Steel Parts
Aerospace Historical
2002-03-14
AMS6533B Steel, Welding Wire 2.0Cr – 10Ni – 14Co – 1.0Mo – (0.13 – 0.17C) Vacuum Melted, Environment Controlled Packaging
Aerospace Historical
2002-03-13
J2406_200203 Recommended Practices For CNG Powered Medium And Heavy-Duty Trucks
Commercial Historical
2002-03-13
J2574_200203 Fuel Cell Vehicle Terminology
Automotive Historical
2002-03-13
AMS6501C Steel, Maraging, Welding Wire 18Ni – 8.0Co – 4.9Mo – 0.40Ti – 0.10Al Vacuum Induction Melted, Environment Controlled Packaging
Aerospace Historical
2002-03-13
AMS4336 Aluminum Alloy, Extruded Rod, Bar, And Profiles (7055-T76511) 8.0Zn – 2.3Cu – 2.0Mg – 0.16Zr Solution Heat Treated, Stress-Relieved, And Overaged
Aerospace Historical
2002-03-13
J1168_200203 Motorcycle Bank Angle Measurement Procedure
Automotive Historical
2002-03-12
J2284/2_200203 High Speed CAN (HSC) For Vehicle Applications At 250 Kbps
Automotive Historical
2002-03-07
MA2106A HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, 90° TO 90° FITTING ENDS, METRIC
Aerospace Historical
2002-03-07
MA2101 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO STRAIGHT FITTING ENDS, METRIC
Aerospace Historical
2002-03-07
MA2085 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204°C, 21,000 KPa, 60-DEG CONE, TO 90-DEG TO 90-DEG, LIGHTWEIGHT, METRIC
Aerospace Historical
2002-03-07
MA2105 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, 45° TO 90° FITTING ENDS, METRIC
Aerospace Historical
2002-03-07
MA2104 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, 45° TO 45° FITTING ENDS, METRIC
Aerospace Historical
2002-03-07
MA2103 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO 90° FITTING ENDS, METRIC
Aerospace Historical
2002-03-07
MA2102 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO 45° FITTING ENDS, METRIC
Aerospace Historical
2002-03-07
MA2178A HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE CRES REINFORCED, 232 °C, 10 500 KPa, BEAM SEAL, STRAIGHT TO 90°, METRIC
Aerospace Historical
2002-03-07
AS1914B HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400°F, 3000 Psi, LIGHTWEIGHT, BEAM SEAL, 90° TO 90°
Aerospace Historical
2002-03-07
AS1913B HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400°F, 3000 Psi, LIGHTWEIGHT, BEAM SEAL, 45° TO 90°
Aerospace Historical
2002-03-07
AS1911B HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400°F, 3000 Psi, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 90°
Aerospace Historical
2002-03-07
AS1912B HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400°F, 3000 Psi, LIGHTWEIGHT, BEAM SEAL, 45° TO 45°
Aerospace Historical
2002-03-07
AS1910B HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400°F, 3000 Psi, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 45°
Aerospace Historical
2002-03-07
AS1909B HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400°F, 3000 Psi, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO STRAIGHT
Aerospace Historical
2002-03-07
AS1895/22A COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
Aerospace Historical
2002-03-07
AS1895/4C COUPLING, V-RETAINER, SINGLE LATCH, TYPE II LOW PROFILE
Aerospace Historical
2002-03-07
AS1895/20A COUPLING, V-RETAINER, DOUBLE LATCH, TYPE II LOW PROFILE
Aerospace Historical
2002-03-07
J2284/1_200203 High Speed CAN (HSC) For Vehicle Applications At 125 Kbps
Automotive Historical
2002-03-07
J2350_200203 Electric Blower Motor Switch–Trucks, Buses, And Multipurpose Vehicles
Commercial Historical
2002-03-06
J2349_200203 Electric Windshield Wiper Switch–Trucks, Buses, And Multipurpose Vehicles
Commercial Historical
2002-03-06
J2348_200203 Electric Windshield Washer Switch–Trucks, Buses, And Multipurpose Vehicles
Commercial Historical
2002-03-06
AMSQQP416A Plating, Cadmium (Electrodeposited)
Aerospace Historical
2002-03-05
AS4319 EXPANDER, ADAPTER, FLARED TUBE TO BOSS, FOR SEAL RING
Aerospace Historical
2002-03-01
AS4809 FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON RUN
Aerospace Historical
2002-03-01
AS4808 FITTING ASSEMBLY, ELBOW, 45°, BEAM SEAL, RETAINED NUT
Aerospace Historical
2002-03-01
AS4807 FITTING ASSEMBLY, ELBOW, 90°, BEAM SEAL, RETAINED NUT
Aerospace Historical
2002-03-01
AS1717C RETAINER, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS
Aerospace Historical
2002-03-01
AS1714C NUT ASSEMBLY, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS
Aerospace Historical
2002-03-01
AS1716C FERRULE, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TUBE END
Aerospace Historical
2002-03-01
AS1715C WASHER, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS
Aerospace Historical
2002-03-01
AS4864 PLUG, PIPE, EXTERNAL THREAD, COUNTERSINK HEX HEAD
Aerospace Historical
2002-03-01
AS4860 NIPPLE, PIPE, EXTERNAL THREAD
Aerospace Historical
2002-03-01
AS4858 CROSS, PIPE, INTERNAL THREAD
Aerospace Historical
2002-03-01
AS4856 ELBOW, 90°, PIPE, INTERNAL THREAD
Aerospace Historical
2002-03-01
AS4857 TEE, PIPE, INTERNAL THREAD
Aerospace Historical
2002-03-01
AS4854 ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
Aerospace Historical
2002-03-01
AS4855 ELBOW, 45°, PIPE, INTERNAL AND EXTERNAL THREAD
Aerospace Historical
2002-03-01
AS4318 ADAPTER, FLARED TUBE .375 BULKHEAD TO BOSS, FOR SEAL RING
Aerospace Historical
2002-03-01
AS4340 BUSHING – SCREW THREAD REDUCER, FOR SEAL RING
Aerospace Historical
2002-03-01
AS4328 UNION, REDUCER, BULKHEAD, FLARED TUBE, FOR SEAL RING
Aerospace Historical
2002-03-01
AS33698 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 3
Aerospace Historical
2002-03-01
AS1718C COUPLING BODY, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS
Aerospace Historical
2002-03-01
AS81021 Copper-Beryllium Alloy (Copper Alloy Numbers C17500 And C17510), Strip
Aerospace Historical
2002-03-01
AS33699 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 7
Aerospace Historical
2002-03-01
AS33701 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 19
Aerospace Historical
2002-03-01
AS33702 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 27
Aerospace Historical
2002-03-01
AS33703 INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 37
Aerospace Historical
2002-03-01
AS4861 BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
Aerospace Historical
2002-03-01
AS5003 FITTING, TEE, BEAM SEAL BULKHEAD ON RUN
Aerospace Historical
2002-03-01
AS5004 FITTING, TEE, BEAM SEAL BULKHEAD ON SIDE
Aerospace Historical
2002-03-01
AS5002 FITTING, ELBOW, 90°, BEAM SEAL
Aerospace Historical
2002-03-01
ARP5607 Legibility Of Print On Aerospace Wires And Cables
Aerospace Historical
2002-03-01
AS4317 REDUCER, ADAPTER, FLARED TUBE TO BOSS, FOR SEAL RING
Aerospace Historical
2002-03-01
J1306_200203 Motorcycle Auxiliary Front Lamps
Commercial Historical
2002-03-01
AS4859 COUPLING, PIPE, INTERNAL THREAD
Aerospace Historical
2002-03-01
AIR1380B Recommended Practice For Measurement Of Static Mechanical Stiffness Properties Of Aircraft Tires
Aerospace Current
2002-02-28
AMS3417B Flux, Brazing High Temperature
Aerospace Historical
2002-02-28
ARINC628P6 CABIN EQUIPMENT INTERFACES PART 6 FIBER OPTIC CABLE ASSEMBLY GENERAL SPECIFICATION
Aerospace Current
2002-02-28
AMS3040C Magnetic Particles, Nonfluorescent Dry Method
Aerospace Historical
2002-02-28
AMS6255C Steel Bars, Forgings, And Tubing 1.1Si – 1.45Cr – 1.0Mo – 0.08Al (0.16 – 0.22C) Double Vacuum Melted
Aerospace Historical
2002-02-28
AMS6430F Steel, Bars, Forgings, Tubing, And Rings 0.75Mn – 0.78Cr – 1.8Ni – 0.35Mo – 0.20V (0.32 – 0.38C) (4335 Modified)
Aerospace Historical
2002-02-28
AMS3045D Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Ready-To-Use
Aerospace Historical
2002-02-28
AMS3414D Flux, Aluminum Welding
Aerospace Historical
2002-02-28
J2534_200202 Recommended Practice For Pass-Thru Vehicle Programming
Automotive Historical
2002-02-28
AMS3046E Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged
Aerospace Historical
2002-02-28
AMS6345A Steel, Sheet, Strip, And Plate 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) Normalized Or Otherwise Heat Treated
Aerospace Historical
2002-02-28
AMS2431/2C Peening Media (ASH) Cast Steel Shot, High Hardness (55 To 62 HRC)
Aerospace Historical
2002-02-28
AMS2431/1C Peening Media (ASR) Cast Steel Shot, Regular Hardness (45 To 52 HRC)
Aerospace Historical
2002-02-28
AMS3043C Magnetic Particles, Nonfluorescent Wet Method, Oil Vehicle, Aerosol Packaged
Aerospace Historical
2002-02-28
AMS3044E Magnetic Particles, Fluorescent Wet Method, Dry Powder
Aerospace Historical
2002-02-28
AMS3041D Magnetic Particles, Nonfluorescent Wet Method, Oil Vehicle, Ready-To-Use
Aerospace Historical
2002-02-28
AMS3042D Magnetic Particles, Nonfluorescent Wet Method, Dry Powder
Aerospace Historical
2002-02-28
AMS6526E Steel, Bars, Forgings, Tubing, And Rings 1.0Cr – 7.5Ni – 4.5Co – 1.0Mo – 0.09V (0.29 – 0.34C) Consumable Electrode Vacuum Melted, Annealed
Aerospace Historical
2002-02-28
AMS6274M Steel Bars, Forgings, And Tubing 0.50Cr – 0.55Ni – 0.20Mo (0.18 – 0.23C)
Aerospace Historical
2002-02-28
J413_200202 Mechanical Properties Of Heat Treated Wrought Steels
Automotive Historical
2002-02-27
J450_200202 Use Of Terms Yield Strength And Yield Point
Automotive Historical
2002-02-27
J935_200202 High-Strength Carbon And Alloy Die Drawn Steels
Automotive Historical
2002-02-27
AS9132 Data Matrix (2D) Coding Quality Requirements For Parts Marking
Aerospace Historical
2002-02-26
AS4228 FITTING, ADAPTER, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
Aerospace Historical
2002-02-23
AS4308 BUSHING – SCREW THREAD EXPANDER, FOR SEAL RING
Aerospace Historical
2002-02-23
AS4309 NIPPLE – FLARED TUBE TO PIPE THREAD, FOR SEAL RING
Aerospace Historical
2002-02-23
AS4301 REDUCER – ADAPTER, CONICAL END TO FLARED TUBE, FOR SEAL RING
Aerospace Historical
2002-02-23
AS4307 ADAPTER, FLARED TUBE TO BOSS, FOR SEAL RING
Aerospace Historical
2002-02-23
AS4224 FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON SIDE
Aerospace Historical
2002-02-23
AS4233 FITTING, ELBOW, 90°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
Aerospace Historical
2002-02-23
AS4232 FITTING, ELBOW, 90°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
Aerospace Historical
2002-02-23
AS4231 FITTING, ELBOW, 45°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
Aerospace Historical
2002-02-23
AS4230 FITTING, ELBOW, 45°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
Aerospace Historical
2002-02-23
AS4227 FITTING ASSEMBLY, ADAPTER, INTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
Aerospace Historical
2002-02-23
AS4220 FITTING, ELBOW, 45°, BEAM SEAL BULKHEAD
Aerospace Historical
2002-02-22
AS4210A FITTING, TEE, BEAM SEAL
Aerospace Historical
2002-02-22
AS4211A FITTING, CROSS, BEAM SEAL
Aerospace Historical
2002-02-22
USCAR19 Coaxial Cable Connector Interface – Square Outer Conductor
Automotive Historical
2002-02-22
AS3078A FITTING, INSERT, FLUID CONECTION, MS33649 BOSS TO RING LOCKED BOSS
Aerospace Historical
2002-02-22
AS4221 FITTING, ELBOW, 90°, BEAM SEAL BULKHEAD
Aerospace Historical
2002-02-22
AS4135 TEE, BULKHEAD ON SIDE, REDUCED BODY, FLARELESS
Aerospace Historical
2002-02-22
USCAR17 Performance Specification For Automotive RF Connector Systems
Automotive Historical
2002-02-22
J2539_200202 Comparison Of GATS Messages To SAE ATIS Standards
Automotive Historical
2002-02-22
J667_200202 Brake Test Code–Inertia Dynamometer
Automotive Current
2002-02-22
AS4222 FITTING, UNION, BEAM SEAL
Aerospace Historical
2002-02-22
J2540/2_200202 Itis Phrase Lists (International Traveler Information Systems)
Automotive Historical
2002-02-22
AS1368A REDUCER – EXTERNAL THREAD FLARED TUBE, FOR SEAL RING
Aerospace Historical
2002-02-21
USCAR18 FAKRA SMB RF CONNECTOR SUPPLEMENT
Automotive Historical
2002-02-21
MA2048A ELBOW, THIN WALL, 45° SWIVEL NUT, FLARELESS, METRIC
Aerospace Historical
2002-02-21
MA2049A TEE, THIN WALL, SWIVEL NUT ON RUN, FLARELESS, METRIC
Aerospace Historical
2002-02-21
MA2050A ELBOW, THIN WALL, 90° SWIVEL NUT, FLARELESS, METRIC
Aerospace Historical
2002-02-21
MA2051A TEE, THIN WALL, SWIVEL NUT ON SIDE, FLARELESS, METRIC
Aerospace Historical
2002-02-21
AS1859 FITTING END, NON-REVERSIBLE STRAIGHT THREAD, BOSS CONNECTION
Aerospace Historical
2002-02-21
AS1858 FITTING END, NON-REVERSIBLE, FLARED TUBE CONNECTION, OVERSIZE THREAD
Aerospace Historical
2002-02-21
AS1857 FITTING END, NON-REVERSIBLE, FLARELESS TUBE CONNECTION, OVERSIZE THREAD
Aerospace Historical
2002-02-21
AS1856 INSTALLATION, NON-REVERSIBLE FITTING END
Aerospace Historical
2002-02-21
AS1861 NUT, SLEEVE COUPLING, TUBE REDUCER, FLARED
Aerospace Historical
2002-02-21
AS1860 NUT, SLEEVE COUPLING, TUBE REDUCER, FLARELESS
Aerospace Historical
2002-02-21
AS934B FITTING, ADAPTER, REDUCER/EXPANDER, FLARED TO BOSS
Aerospace Historical
2002-02-21
AS1299B ADAPTER – PORT CONNECTION RING LOCKED TO FLARELESS TUBE END
Aerospace Historical
2002-02-21
AS1251B UNION, FLARED TUBE FOR SEAL RING
Aerospace Historical
2002-02-21
AS1369A PLUG, FLARED TUBE FOR SEAL RING
Aerospace Historical
2002-02-21
J733_200202 Nomenclature–Rippers And Scarifiers
Commercial Current
2002-02-21
J1329_200202 Minimum Performance Criteria For Braking Systems For Specialized Rubber- Tired, Self-Propelled Underground Mining Machines
Commercial Current
2002-02-21
J727_200202 Nomenclature–Crawler Tractor
Commercial Current
2002-02-21
J749_200202 Drawbars–Crawler Tractor
Commercial Current
2002-02-21
J729_200202 Nomenclature And Specification Definitions–Dozers
Commercial Current
2002-02-21
J1371_200202 Hydraulic Excavator Swing Performance And Rating Procedure
Automotive Current
2002-02-21
AMS4999 Titanium Alloy Laser Deposited Products 6Al – 4V Annealed
Aerospace Historical
2002-02-20
AMS1428D Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, And IV
Aerospace Historical
2002-02-20
AS4372B Performance Requirements For Wire, Electric, Insulated Copper Or Copper Alloy
Aerospace Historical
2002-02-15
J2546_200202 Model Specification Process Standard
Automotive Current
2002-02-15
AIR5479 Environmentally Compliant Processes For Landing Gear
Aerospace Historical
2002-02-15
AS85421/2 FITTING END, STANDARD DIMENSIONS FOR BULKHEAD, DYNAMIC BEAM SEAL, MALE
Aerospace Historical
2002-02-13
AS81819/1 BEARINGS, PLAIN, SLIDING SPHERICAL, SELF-LUBRICATING, SELF-ALIGNING, HIGH SPEED OSCILLATION
Aerospace Historical
2002-02-13
AS17108 BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS, TYPE II
Aerospace Historical
2002-02-13
AS81765/7 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE FLUOROPOLYMER COMPOSITE, SEMI-RIGID, CROSSLINKED
Aerospace Historical
2002-02-13
AS81765/1 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE POLYOLEFIN, CROSSLINKED, SEMI-RIGID AND FLEXIBLE
Aerospace Historical
2002-02-13
AS81765 Insulating Components, Molded, Electrical, Heat Shrinkable, General Specification For
Aerospace Historical
2002-02-13
AS81765/2 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE POLYCHLOROPRENE, FLEXIBLE, CROSSLINKED
Aerospace Historical
2002-02-13
AS81765/3 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE SILICONE RUBBER, FLEXIBLE, CROSSLINKED
Aerospace Historical
2002-02-13
AS91761 PLUG, EXPANSION – TAPERED, AMS 5040
Aerospace Historical
2002-02-13
AS81366 Boundary Layer Control System; Pressure
Aerospace Historical
2002-02-13
AS81807 Marking Of Aircraft Ground Support Equipment And Other Flight Line Vehicles With Retro-Reflective Materials; Process For
Aerospace Historical
2002-02-13
AS28937 FUSE, LIMITER TYPE, ENCLOSED LINK, 5-60 AMP, AIRCRAFT
Aerospace Historical
2002-02-13
AS28938 FUSE, LIMITER TYPE, ENCLOSED LINK, INTERMEDIATE RATING, AIRCRAFT
Aerospace Historical
2002-02-13
AS81765/6 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE FLUOROPOLYMER, SEMI-RIGID, CROSSLINKED
Aerospace Historical
2002-02-13
AS81765/4 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE FLUOROELASTOMER, FLEXIBLE, CROSSLINKED
Aerospace Historical
2002-02-13
AS21440 BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL STUD, SEALED, TYPE VIII, ANTIFRICTION, INCH
Aerospace Historical
2002-02-13
AS24462 BEARING, ROLLER, NEEDLE-SINGLE ROW, THIN SHELL, TYPE II, ANTIFRICTION
Aerospace Historical
2002-02-13
AS21004 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1 FOR 175°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
2002-02-13
AS210041 Canister, Lithium Hydroxide, Screened Ends, Friction Type Covers
Aerospace Current
2002-02-13
AS5116A Minimum Operational Performance Specification For Ground Ice Detection Systems
Aerospace Historical
2002-02-11
AMSP83461/1A Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance At 275°F (135°C) Sizes And Tolerances
Aerospace Historical
2002-02-08
J1587_200202 Electronic Data Interchange Between Microcomputer Systems In Heavy-Duty Vehicle Applications
Commercial Historical
2002-02-07
J2395_200202 ITS In-Vehicle Message Priority
Automotive Current
2002-02-07
J2536_200202 Anti-Lock Brake System (Abs) Road Test Evaluation Procedure For Trucks, Truck-Tractors And Buses
Automotive Historical
2002-02-07
AMS6409B Steel, Bars, Forgings, And Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340) Special Aircraft Quality Cleanliness Normalized And Tempered
Aerospace Historical
2002-02-07
J2174_200202 Heavy-Duty Wiring Systems For Trailers 2032 Mm Or More In Width
Commercial Historical
2002-02-05
AIR825/10 Protective Breathing Equipment For Flight Deck And Cabin Crew Members
Aerospace Historical
2002-02-04
AIR825/4 Chemical Oxygen Systems
Aerospace Historical
2002-02-04
AS7116/3 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTRICAL DISCHARGE MACHINING (EDM)
Aerospace Historical
2002-02-01
AS7116/1 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTROCHEMICAL MACHINING (ECM)
Aerospace Historical
2002-02-01
AS7116 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR NONCONVENTIONAL MACHINING
Multiple Historical
2002-02-01
AS7116/2 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTROCHEMICAL GRINDING (ECG)
Aerospace Historical
2002-02-01
AS7116/4 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR LASER BEAM MACHINING (LBM)
Aerospace Historical
2002-02-01
J2305_200201 Safety For Horizontal Earthboring Machines
Commercial Historical
2002-01-31
ARINC711-10 MARK 2 AIRBORNE VOR RECEIVER
Aerospace Current
2002-01-31
J180_200201 Electrical Charging Systems For Off Highway Work Machines
Commercial Historical
2002-01-31
J183_200201 Engine Oil Performance And Engine Service Classification (Other Than “Energy Conserving”)
Automotive Historical
2002-01-30
J1918_200201 Method For The Determination Of Expansion And Water Absorption In Automotive Sealers
Automotive Historical
2002-01-25
J1512_200201 Manual Slack Adjuster Performance Requirements
Automotive Historical
2002-01-25
AMS2372D Quality Assurance Sampling And Testing Carbon And Low-Alloy Steel Forgings
Aerospace Historical
2002-01-24
AMS3374B Sealing Compound Aircraft Firewall
Aerospace Historical
2002-01-24
AMSS5626A Steel: Chrome-Molybdenum (4140) Bars Rods, And Forging Stock (For Aircraft Applications)
Aerospace Current
2002-01-24
AMSS18729A Steel Plate, Sheet, And Strip, Alloy 4130, Aircraft Quality
Aerospace Current
2002-01-24
AMS1452B Disinfectant, Aircraft General Purpose
Aerospace Historical
2002-01-24
AMS5331G Steel, Sand, Castings, 0.82cr 1.8ni 0.35mo (0.38-0.46c) Normalized And Tempered
Aerospace Current
2002-01-24
AMS6256C Steel, Bars, Forgings, And Tubing 1.0cr 3.0ni 4.5mo 0.08al 0.38v (0.10-0.16c) Premium Aircraft-Quality, Double Vacuum Melted
Aerospace Current
2002-01-24
AMS6267F Steel Bars, Forgings, And Tubing 1.2Cr – 3.25Ni – 0.12Mo (0.07 – 0.13C) (SAE 9310) Electroslag Remelted Or Consumable Electrode Vacuum Remelted
Aerospace Historical
2002-01-24
AMS6375B Steel, Welding Wire 0.50Cr – 0.55Ni – 0.20Mo (0.18 – 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging
Aerospace Historical
2002-01-24
AMS4924E Titanium Alloy Bars, Forgings, And Rings 5Al – 2.5Sn, Extra Low Interstitial Annealed
Aerospace Historical
2002-01-24
AMS5936A Steel, Corrosion-Resistant, Bars, Wire, And Forgings 12Cr – 11Ni – 1.7Ti – 1Mo Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2002-01-24
AMS2403K Plating, Nickel General Purpose
Aerospace Historical
2002-01-24
AMS2451/9 Plating, Brush, Zinc-Nickel Low Hydrogen Embrittlement
Aerospace Historical
2002-01-24
AMS2451/10 Plating, Brush, Tin-Zinc Low Hydrogen Embrittlement
Aerospace Historical
2002-01-24
JA1012_200201 A Guide To The Reliability-Centered Maintenance (RCM) Standard
Aerospace Historical
2002-01-24
AMS6431L Steel, Bars, Forgings, And Tubing 1.05Cr – 0.55Ni – 1.0Mo – 0.11V (0.45 – 0.50C) Vacuum Consumable Electrode Melted
Aerospace Historical
2002-01-24
J2540/3_200201 National Names Phrase List
Automotive Historical
2002-01-23
J2612_200201 Internal Combustion Engines — Piston Vocabulary
Automotive Historical
2002-01-23
AMS5779C Alloy Welding Electrodes, Covered, Corrosion And Heat Resistant 75Ni – 15Cr – 1.5 (Cb+Ta) – 1.9Ti – 0.55Al – 5.5Fe
Aerospace Historical
2002-01-18
AMS5397C Alloy Castings, Investment, Corrosion And Heat Resistant 50Ni – 9.5Cr – 15Co – 3.0Mo – 4.8Ti – 5.5Al – 0.015B – 0.95V – 0.06Zr Vacuum Melted, Vacuum Cast As Cast
Aerospace Historical
2002-01-18
J374_200201 Vehicle Roof Strength Test Procedure
Automotive Historical
2002-01-17
AIR4779A User’s Guide To AMS Specifications
Aerospace Historical
2002-01-16
MAM2201A Tolerances, Metric, Aluminum And Aluminum Alloy Bar, Rod, Wire, And Forging Stock, Rolled, Drawn, Or Cold Finished
Aerospace Current
2002-01-16
AMS4934D Titanium Alloy, Extrusions And Flash Welded Rings 6Al – 4V Solution Heat Treated And Aged
Aerospace Historical
2002-01-16
AMS4914B Titanium Alloy Cold Rolled Sheet And Strip 15V – 3Al – 3Cr – 3Sn Solution Heat Treated
Aerospace Historical
2002-01-16
J1707_200201 Service Maintenance Of SAE J1703 And J1704 Brake Fluids In Motor Vehicle Brake Systems
Automotive Historical
2002-01-16
AMS4935G Titanium Alloy Extrusions And Flash Welded Rings 6Al – 4V Annealed Beta Processed
Aerospace Historical
2002-01-16
AMS2643C Structural Examination Of Titanium Alloys Chemical Etch Inspection Procedure
Aerospace Historical
2002-01-15
AMS2615E Pressure Testing, Hydraulic Pressure As Specified
Aerospace Historical
2002-01-15
J20_200201 Coolant System Hoses
Automotive Historical
2002-01-11
J2261_200201 Stop Lamps And Front- And Rear-Turn Signal Lamps For Use On Motor Vehicles 2032 Mm Or More In Overall Width
Automotive Historical
2002-01-10
J1424_200201 Cargo Lamps For Use On Vehicles Under 5443 Kg (12 000 Lb) GVWR
Automotive Historical
2002-01-09
AMS5404A Alloy Castings, Investment, Corrosion And Heat Resistant 59Ni – 12.6Cr – 9.0Co – 1.9Mo – 4.2W – 4.0Ti – 4.2Ta – 3.4Al – 0.015B – 0.10Zr – 0.90Hf Vacuum Melted, Vacuum Cast Solution And Precipitation Heat Treated
Aerospace Historical
2002-01-07
AIR4288 Linear Token Passing Multiplex Data Bus User’s Handbook
Aerospace Historical
2002-01-06
MA2096B FITTING END, 24° CONE, BULKHEAD, DESIGN STANDARD, METRIC
Aerospace Historical
2002-01-06
MA2095B FITTING END, 24° CONE, DESIGN STANDARD, METRIC
Aerospace Historical
2002-01-06
AIR4289 Handbook For The SAE AS4075 High Speed Ring Bus Standard
Aerospace Historical
2002-01-06
AS4290 Validation Test Plan For AS4074 Linear Token Passing Multiplex Data Bus
Aerospace Historical
2002-01-06
AS1301C Adapters – Port Connection, Ring Locked Design, Installation And Removal Of
Aerospace Historical
2002-01-06
AS5235 FITTING, SLEEVE, COUPLING, FLARELESS
Aerospace Historical
2002-01-06
MS1011_200201 Lubricants, Industrial Oils And Related Products — Type X (Greases) — Specification
Automotive Historical
2002-01-04
AMS4785F Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au – 34Pd – 36Ni 2075 To 2130 °F (1135 To 1166 °C) Solidus-Liquidus Range
Aerospace Historical
2002-01-02
AMS4786F Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au – 8.0Pd – 22Ni 1845 To 1915 °F (1007 To 1046 °C) Solidus-Liquidus Range
Aerospace Historical
2002-01-02
J2318_200201 Air Brake Actuator Test Performance Requirements
Commercial Historical
2002-01-02
AMS5375E Alloy Castings, Investment, Corrosion And Heat Resistant 65.5Co – 25Cr – 1.8Ni – 5.0W As Cast
Aerospace Historical
2002-01-01
AMS5403A Alloy Castings, Investment, Corrosion And Heat Resistant 60Ni – 14Cr – 9.5Co – 4.0Mo – 4.0W – 5.0Ti – 3.0Al – 0.015B – 0.06Zr Vacuum Melted, Vacuum Cast
Aerospace Historical
2002-01-01
AMS5378E Alloy Castings, Investment, Corrosion And Heat Resistant 65.5Co – 25Cr – 1.8Ni – 5.0W As Cast
Aerospace Historical
2002-01-01
AS4824A GASKET, FITTING END, 37° FLARED
Aerospace Historical
2002-01-01
J2561_200112 Bluetooth™ Wireless Protocol For Automotive Applications
Automotive Historical
2001-12-31
J163_200112 Low Tension Wiring And Cable Terminals And Splice Clips
Automotive Historical
2001-12-28
J1980_200112 Guidelines For Evaluating Out-Of-Position Vehicle OccupantInteractions With Deploying Frontal Airbags
Automotive Historical
2001-12-27
J2189_200112 Guidelines For Evaluating Child Restraint SystemInteractions With Deploying Airbags
Automotive Historical
2001-12-27
J1494_200112 Battery Booster Cables
Automotive Historical
2001-12-27
J858_200112 Electrical Terminals Blade Type
Automotive Historical
2001-12-27
J1760_200112 Data Security Services
Automotive Historical
2001-12-26
J561_200112 Electrical Terminals–Eyelet And Spade Type
Automotive Historical
2001-12-26
AS9131 Quality Systems Non-Conformance Documentation
Aerospace Historical
2001-12-21
J2590_200112 PMODE For In-Vehicle Networks
Automotive Current
2001-12-19
J2450_200112 Translation Quality Metric
Automotive Historical
2001-12-19
J2582_200112 Automotive Ductile Iron Castings For High Temperature Applications
Automotive Historical
2001-12-18
J1538_200112 Glossary Of Automotive Inflatable Restraint Systems
Automotive Historical
2001-12-18
J1630_200112 Driver Or Passenger Airbag Module Deployment Test Procedure
Automotive Historical
2001-12-18
J2320_200112 Discharge Signal Lighting System
Automotive Historical
2001-12-17
AIR825/11 Closed-Cycle Protective Breathing Devices
Aerospace Historical
2001-12-14
AS3480B NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
Aerospace Historical
2001-12-14
AS3478B NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
Aerospace Historical
2001-12-14
AS3479C NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
Aerospace Historical
2001-12-14
AS3482B NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
Aerospace Historical
2001-12-14
J360_200112 Truck And Bus Grade Parking Performance Test Procedure
Automotive Historical
2001-12-14
AS5176A FITTING, SLEEVE, FLARED
Aerospace Historical
2001-12-14
AS3481D NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
Aerospace Historical
2001-12-14
J2551_200112 Recommended Practices For Fluid Conductor Metallic Tubing Applications
Automotive Historical
2001-12-13
ARP4737E Aircraft Deicing/Anti-Icing Methods
Aerospace Historical
2001-12-12
ARINC610B GUIDANCE FOR USE OF AVIONICS EQUIPMENT AND SOFTWARE IN SIMULATORS
Aerospace Current
2001-12-12
ARINC562 TERRAIN AWARENESS AND WARNING SYSTEM ((TAWS) – ANALOG
Aerospace Current
2001-12-12
J2014_200112 Pneumatic Tires For Military Tactical Wheeled Vehicles
Commercial Historical
2001-12-11
J1437_200112 Lead-Free Replacement Paints
Automotive Current
2001-12-11
J1754/2_200112 Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced — Part 2: Ordering Information
Automotive Historical
2001-12-11
J400_200112 Test For Chip Resistance Of Surface Coatings
Automotive Historical
2001-12-11
J1754/1_200112 Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced–Part 1: Procurement Document
Automotive Historical
2001-12-11
J815_200112 Load Deflection Testing Of Urethane Foams For Automotive Seating
Automotive Historical
2001-12-10
J637_200112 Automotive V-Belt Drives
Automotive Historical
2001-12-10
J636_200112 V-Belts And Pulleys
Automotive Historical
2001-12-10
J200_200112 Classification System For Rubber Materials
Automotive Historical
2001-12-10
J442_200112 Test Strip, Holder, And Gage For Shot Peening
Automotive Historical
2001-12-10
AIR811B Disposition Of Wheels Which Have Been Overheated
Aerospace Historical
2001-12-08
AIR1174B Index Of Starting System Specifications And Standards
Aerospace Current
2001-12-07
AS9458A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .6250-18 UNJF-3A
Aerospace Historical
2001-12-07
AS9457A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5625-18 UNJF-3A
Aerospace Historical
2001-12-07
AS9456A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A
Aerospace Historical
2001-12-07
AS9455A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
Aerospace Historical
2001-12-07
AS9453A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A
Aerospace Historical
2001-12-07
AS9452A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A
Aerospace Historical
2001-12-07
AS9451A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A
Aerospace Historical
2001-12-07
ARP5374 Method Of Testing Pre-Conditioned Air Equipment
Aerospace Historical
2001-12-07
AS81935A Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For
Aerospace Historical
2001-12-07
AMS2442 Magnetic Particle Acceptance Criteria For Parts
Aerospace Historical
2001-12-07
AS5406A FITTING, UNION, TUBE, .375 BULKHEAD
Aerospace Historical
2001-12-07
J2031_200112 High Tension Ignition Cable
Automotive Historical
2001-12-06
MA3286A BOLT, MACHINE-HEX HEAD-PD SHANK-MJ THREAD, AMS 5731, METRIC
Aerospace Historical
2001-12-04
J515_200112 Specification For Hydraulic O-Ring Materials, Properties, And Sizes For Metric And Inch Stud Ends, Face Seal Fitting And Four-Screw Flange Tube Connections
Automotive Historical
2001-12-04
AS63762-1 AS63762 Balance Weights, Clamped-On Type
Aerospace Current
2001-12-01
AS63763-1 AS63763 Balance Weights, Clamped-On Type, For Large Diameter Applications
Aerospace Current
2001-12-01
AS63764-1 AS63764 Clamp, Balance Weight, For Large Diameter Applications
Aerospace Current
2001-12-01
AS63765-1 AS63765 Clamp, Balance Weight
Aerospace Current
2001-12-01
USCAR12-2 Wiring Component Design Guidelines
Automotive Historical
2001-12-01
USCAR20 Field Correlated Life Test Supplement To SAE/Uscar-2
Automotive Historical
2001-12-01
AS9360A NUT, PLAIN, HEXAGON – DRILLED, SILVER PLATED – UNS S66286, 130 KSI MIN
Aerospace Historical
2001-11-30
AS90991A NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM – UNS A92024
Aerospace Historical
2001-11-30
AS5206 NUT, FLARED, LONG
Aerospace Historical
2001-11-30
AS3226 TUBE, TEE, BOSS – AMS 5646
Aerospace Historical
2001-11-29
MA3354 Nut, Plain Hex-Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric
Aerospace Historical
2001-11-28
AS3319A STUD – STRAIGHT, RING LOCKED, CRES AMS-5731 0.190-24UNJC X 0.190-32UNJF
Aerospace Historical
2001-11-28
AS3235A BOLT, TEE HEAD – AMS 5708, CHAMFERED, .3750-24 UNJF-3A
Aerospace Historical
2001-11-28
AS3233 BOLT, TEE HEAD – AMS 5708, CHAMFERED, .2500-28 UNJF-3A
Aerospace Historical
2001-11-28
AS3321A STUD – STRAIGHT, RING LOCKED, CRES AMS-5731 0.3125-18UNJC X 0.3125-24UNJF
Aerospace Historical
2001-11-28
AS3320A STUD – STRAIGHT, RING LOCKED, CRES AMS-5731 0.250-20UNJC X 0.250-28UNJF
Aerospace Historical
2001-11-28
AS3322A STUD – STRAIGHT, RING LOCKED, CRES AMS-5731 0.375-16UNJC X 0.375-24UNJF
Aerospace Historical
2001-11-28
MA3353 Nut, Self-Locking – Spline Drive, Extended Washer, UNS G87400, Cadmium Plate, MJ Thread, Metric
Aerospace Historical
2001-11-28
AS3234 BOLT, TEE HEAD – AMS 5708, CHAMFERED, .3125-24 UNJF-3A
Aerospace Historical
2001-11-28
MAM2616C Pressure Testing, Hydraulic, 1380 Kpa
Aerospace Current
2001-11-28
MAM2620C Pressure Testing, Hydraulic, 6895 Kpa
Aerospace Current
2001-11-28
MAM2625C Pressure Testing, Hydraulic, 17.5 Mpa
Aerospace Current
2001-11-28
AMS4253A Aluminum Alloy-Aramid Fiber Reinforced-Laminated Sheet 5.7Zn – 2.2Mg – 1.6Cu – 0.22Cr (7475-T61) 3, 5, 7, Or 9 Ply
Aerospace Historical
2001-11-28
AMS2620E Pressure Testing, Hydraulic, 1000 Psi
Aerospace Current
2001-11-28
AMS2625E Pressure Testing, Hydraulic, 2500 Psi
Aerospace Current
2001-11-28
AMS2616E Pressure Testing, Hydraulic, 200 Psi
Aerospace Current
2001-11-28
AMS4176C Honeycomb Core, Aluminum Alloy, For Sandwich Construction, 5056, 350 (175)
Aerospace Current
2001-11-28
AMS4175C Honeycomb Core, Aluminum Alloy, For Sandwich Construction, 5052, 350 (175)
Aerospace Current
2001-11-28
MAM2615B Pressure Testing, Hydraulic, Pressure As Specified, Metric
Aerospace Current
2001-11-28
AS933B FITTING, ADAPTER, UNION, FLARED TO BOSS
Aerospace Historical
2001-11-28
AMS2375C Control Of Forgings Requiring First Article Approval
Aerospace Historical
2001-11-28
J2366/1L_200111 ITS Data Bus—Low Impedance Stereo Audio (LISA)
Automotive Current
2001-11-27
J2366/1_200111 ITS Data Bus—IDB-C Physical Layer
Automotive Current
2001-11-27
J2366/2_200111 Link Layer
Automotive Current
2001-11-27
J1772_200111 SAE Electric Vehicle Conductive Charge Coupler
Automotive Historical
2001-11-27
J403_200111 Chemical Compositions Of SAE Carbon Steels
Automotive Historical
2001-11-26
J20/1_200111 Coolant Hose (Supplement To SAE J20 For Government Use Replacing Part Of Ms52130)
Automotive Historical
2001-11-21
J20/2_200111 Coolant Hose – Normal Service Type Convoluted, Wire Support Hose (Supplement To SAE J20)
Automotive Historical
2001-11-21
J20_200111 Coolant System Hoses
Automotive Historical
2001-11-21
AMS5697E Steel, Corrosion Resistant, Wire 19Cr – 9.5Ni (SAE 30304) Solution Heat Treated
Aerospace Historical
2001-11-20
AMS4898A Titanium Alloy, Sheet 6Al – 2Sn – 2Zr – 2Mo – 2Cr – 0.15Si Annealed
Aerospace Historical
2001-11-20
AMS5675E Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 70Ni – 2.4Mn – 15.5Cr – 3.0Ti – 7.0Fe
Aerospace Historical
2001-11-20
AMS5504L Steel, Corrosion And Heat Resistant, Sheet, Strip, And Plate 12.5Cr (SAE 51410) Annealed
Aerospace Historical
2001-11-20
AMS5778E Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 72Ni – 15.5Cr – 1.0Cb – 2.4Ti – 0.70Al – 7.0Fe
Aerospace Historical
2001-11-20
AMS5798E Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 47.5Ni – 22Cr – 1.5Co – 9.0Mo – 0.60W – 18.5Fe
Aerospace Historical
2001-11-20
J1881_200111 Initial Graphics Exchange Specification
Automotive Current
2001-11-19
AMS3168 Aqueous Cleaners For Cleaning Prior To Application Of Sealing Compounds
Aerospace Current
2001-11-19
AMS4330 Aluminum Alloy, Plate (2297-T87) 2.8Cu – 1.5Li – 0.30Mn – 0.25Mg Solution Heat Treated, Stretched, And Artificially Aged
Aerospace Historical
2001-11-19
AMS4427A Magnesium Alloy Castings, Sand 4.0Y – 2.3Nd – 0.7Zr (WE43B – T6) Solution And Precipitation Heat Treated
Aerospace Historical
2001-11-19
AMS4926K Titanium Alloy, Bars, Wire, And Rings 5Al – 2.5Sn Annealed, 110 Ksi (758 MPa) Yield Strength
Aerospace Historical
2001-11-19
AMS4910L Titanium Alloy, Sheet, Strip, And Plate 5Al – 2.5Sn Annealed
Aerospace Historical
2001-11-19
AMS2401F Plating, Cadmium Low Hydrogen Content Deposit
Aerospace Historical
2001-11-19
AMS4025J ALUMINUM ALLOY, SHEET AND PLATE 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-0) Annealed
Aerospace Historical
2001-11-19
AMS4907G Titanium Alloy, Sheet, Strip, And Plate 6.0Al – 4.0V, Extra Low Interstitial Annealed
Aerospace Historical
2001-11-19
J1960_200111 Accelerated Exposure Of Automotive Exterior Materials Using A Controlled Irradiance Water-Cooled Xenon Arc Apparatus
Automotive Historical
2001-11-16
AMS4128C Aluminum Alloy Bars, Rolled Or Cold Finished 1.0Mg – 0.60Si – 0.30Cu – 0.20Cr (6061-T451) Solution Heat Treated And Stress Relieved By Stretching
Aerospace Historical
2001-11-15
J1642_200111 Medium- And Heavy-Duty Truck Converter/Muffler Configuration
Automotive Current
2001-11-15
J1649/1_200111 Compressed Air For General Use–Part 1: Classes
Automotive Current
2001-11-15
AMS4111C Aluminum Alloy Forgings 7.7Zn – 2.5Mg – 1.5Cu – 0.16Cr (7049-T73) Solution And Precipitation Heat Treated
Aerospace Historical
2001-11-15
AMS4102G Aluminum Alloy, Bars, Rods, And Wire, Rolled Or Cold-Finished 99.0a1, As Fabricated
Aerospace Current
2001-11-15
AMS4143D Aluminum Alloy Forgings And Rolled Or Forged Rings 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti (2219-T6) Solution And Precipitation Heat Treated
Aerospace Historical
2001-11-15
AMS2769 Heat Treatment Of Parts In A Vacuum
Aerospace Historical
2001-11-15
AS55151 Pump, Hydraulic, Ram, Hand Driven
Aerospace Historical
2001-11-14
J928_200111 Electrical Terminals–Pin And Receptacle Type
Automotive Historical
2001-11-12
AS3077 LOCKRING – FLUID CONNECTION BOSS INSERT, INTERNAL STRAIGHT THREAD
Aerospace Historical
2001-11-08
AS3066 NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, AMS 7251
Aerospace Historical
2001-11-08
J1536_200111 Two-Stroke-Cycle Engine Oil Fuidity/Miscibility Classification
Automotive Historical
2001-11-07
J1510_200111 Lubricants For Two-Stroke-Cycle Gasoline Engines
Automotive Historical
2001-11-07
J2247_200111 Truck Tractor Power Output For Trailer ABS
Automotive Historical
2001-11-06
AMS3346F Silicone Rubber 1000 Psi (6.89 MPa) Minimum Tensile Strength 55 – 65 Durometer
Aerospace Historical
2001-11-05
AS123751A COTTERPIN – CORROSION RESISTANT
Aerospace Historical
2001-11-05
AMS6464F Welding Electrodes, Covered, Steel 1.05Mo – 0.20V (0.06 – 0.12C)
Aerospace Historical
2001-11-05
AMS6485G Steel Bars And Forgings 5.0Cr – 1.3Mo – 0.5V (0.38 – 0.43C)
Aerospace Historical
2001-11-05
AMS3213L Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 – 85
Aerospace Historical
2001-11-05
AS17184 SCREW, EXTERNALLY RELIEVED BODY (SYNCHRO)
Aerospace Historical
2001-11-02
J2200_200111 Passenger Car And Light Truck Axles
Automotive Historical
2001-11-01
AMS2774 Heat Treatment Wrought Nickel Alloy And Cobalt Alloy Parts
Aerospace Historical
2001-11-01
J1855_200110 Deployment Of Electrically Activated Automotive Air Bags For Automobile Reclamation
Automotive Historical
2001-10-31
J2238_200110 Airbag Inflator Ballistic Tank Test Procedure Gas Generators Used In Inflatable Restraint Systems
Automotive Historical
2001-10-31
MA3259 PIN – COTTER, CRES AMS 7211, METRIC SERIES
Aerospace Historical
2001-10-30
J1643_200110 Diesel Catalytic Converter Nomenclature And Terminology
Automotive Current
2001-10-30
AMS3345E Silicone Rubber 1000 Psi (6.90 MPa) Tensile Strength 45 – 55
Aerospace Historical
2001-10-26
J24714_200110 Fluid Systems—Connector Tubes—General Specification And Part Standard
Commercial Current
2001-10-26
J2234_200110 Equivalent Temperature
Automotive Historical
2001-10-26
J1450_200110 Air Brake Actuator Diaphragm Test Procedure
Commercial Historical
2001-10-26
AMS3210G Chloroprene (CR) Rubber Electrical Resistant 65 – 75
Aerospace Historical
2001-10-26
AMS3383 Polytetrafluoroethylene (PTFE) – Fluorosilicone (FVMQ) Rubber High Temperature Fuel And Oil Resistant 75 – 85
Aerospace Historical
2001-10-23
AMS3358B Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 To 180 Poise (8 To 18 Pa·s) Viscosity
Aerospace Historical
2001-10-23
AMS3361B Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 To 400 Poise (15 To 40 Pa·s) Viscosity
Aerospace Historical
2001-10-23
AMS7268C Rings, Sealing, Silicone Rubber Low Compression Set, Non-Oil Resistant 65 – 75
Aerospace Historical
2001-10-23
AMS3359B Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 To 400 Poises (20 To 40 Pa·s) Viscosity
Aerospace Historical
2001-10-23
AMS7271H Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel And Low Temperature Resistant 60 – 70
Aerospace Historical
2001-10-23
AMS2406K Plating, Chromium Hard Deposit
Aerospace Historical
2001-10-18
J1389_200110 Corrosion Test For Insulation Materials
Automotive Historical
2001-10-08
J1361_200110 Hot Plate Method For Evaluating Heat Resistance And Thermal Insulation Properties Of Materials
Automotive Historical
2001-10-08
J160_200110 Dimensional Stability Of Friction Materials When Exposed To Elevated Temperatures
Automotive Historical
2001-10-04
AS46A GENERATOR MOUNTING PAD AND DRIVE, 4 BOLT
Aerospace Current
2001-10-01
ARP4868 Application Programming Interface Requirements For The Presentation Of Gas Turbine Engine Performance On Digital Computers
Aerospace Historical
2001-10-01
AS4074/1 Type F-1 Fiber Optic Media Interface Characteristics
Aerospace Historical
2001-10-01
AS4074/2 Type F-2 Fiber Optic Media Interface Characteristics
Aerospace Historical
2001-10-01
AS9399 BOLT, TEE HEAD – AMS 6322, CHAMFERED, .3125-24 UNJF-3A, CADMIUM PLATE
Aerospace Historical
2001-10-01
AS4074/3 Type E-1 Electrical Media Interface Characteristics
Aerospace Historical
2001-10-01
ARP498A Design, Layout, Criteria — Plastic Integrally Lighted Panels
Aerospace Historical
2001-10-01
AIR822A Oxygen Systems For General Aviation
Aerospace Historical
2001-10-01
AS91001A NUT, HEXAGON, DRILLED, BOSS CONNECTION, CRES – UNS S30400
Aerospace Historical
2001-10-01
AS522A Flange Accessory 3.000 Pilot Diameter – QAD
Aerospace Current
2001-10-01
AS520A Drive Accessory 6.500 Pilot Diameter – QAD
Aerospace Current
2001-10-01
AS519A Drive Accessory 4.125 Pilot Diameter – QAD
Aerospace Current
2001-10-01
AS523A Flange Accessory 4.125 Pilot Diameter – QAD
Aerospace Current
2001-10-01
AS524A Flange Accessory 6.500 Pilot Diameter – QAD
Aerospace Current
2001-10-01
AS526A Coupling – Sheet Metal Retainer – QAD
Aerospace Current
2001-10-01
AS527A Coupling – Forged Retainer – QAD
Aerospace Current
2001-10-01
AS529A Adapter – 10.000 Bolt Circle To 6.500 Pilot Diameter – QAD
Aerospace Current
2001-10-01
AS530A Adapter – 8.000 Bolt Circle To 4.125 Pilot Diameter – QAD
Aerospace Current
2001-10-01
AS532A Drive – 3/4 * Generator – 8″ BC – Male Pilot
Aerospace Current
2001-10-01
AS533A Flange – 3/4 Generator – 8″ BC – Female Pilot
Aerospace Current
2001-10-01
AS534A Drive – 3/4 * Generator – 10″ BC – Male Pilot
Aerospace Current
2001-10-01
AS3506 Insert – Screw Thread, Thin Wall, Self-Locking UNS N07718, Silver Plated, Class: 185 Ksi/1025 °F, Procurement Specification
Aerospace Historical
2001-10-01
AS1614B Commercial Aircraft Towbar Attach Fitting Interface
Aerospace Historical
2001-10-01
AS7115 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELASTOMER SEALS
Aerospace Historical
2001-10-01
ARP5497 Modification Or Replacement Of Components On Dynamically Certified Seat Systems
Aerospace Historical
2001-10-01
MA4038A WASHER, KEY – 180° LOCKING, CRES, UNS S32100, METRIC
Aerospace Historical
2001-10-01
AS7283 Gaskets, Type XX Engine Accessory Drive Corrosion Resistant Steel Screen Reinforced Controlled Performance
Aerospace Historical
2001-10-01
AS9400 BOLT, TEE HEAD – AMS 6322, CHAMFERED, .375-24 UNJF-3A, CADMIUM PLATE
Aerospace Historical
2001-10-01
AS9401 BOLT, TEE HEAD – AMS 6322, CHAMFERED, .4375-20 UNJF-3A, CADMIUM PLATE
Aerospace Historical
2001-10-01
AS9402 BOLT, TEE HEAD – AMS 6322, CHAMFERED, .500-20 UNJF-3A, CADMIUM PLATE
Aerospace Historical
2001-10-01
AS3410A BOLT, TEE HEAD – AMS 5662, CHAMFERED, .250-28UNJF-3A (STRESS RUPTURE RESISTANT)
Aerospace Historical
2001-10-01
AS3412A BOLT, TEE HEAD – AMS 5662, CHAMFERED, .375-24UNJF-3A (STRESS RUPTURE RESISTANT)
Aerospace Historical
2001-10-01
MAM2303C Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2001-10-01
MAM2301A Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2001-10-01
AMS6478A Steel, Bars And Forgings 3.1Cr – 11.5Ni – 13.5Co – 1.2Mo (0.21 – 0.25C) Vacuum Melted, Annealed Heat Treatable To 290 Ksi (1999 MPa) Tensile Strength
Aerospace Historical
2001-10-01
AMS2815W Identification Welding Wire Line Code System
Aerospace Historical
2001-10-01
AMS2815X Identification Welding Wire, Line Code System
Aerospace Current
2001-10-01
AMS5077E STEEL TUBING, WELDED (0.22 – 0.28C) (SAE 1025) Normalized Or Stress Relieved
Aerospace Historical
2001-10-01
AMS5852D Nickel Alloy, Corrosion And Heat Resistant, Billets And Preforms 55ni 15cr 17co 5.0mo 3.5ti 4.0al 0.025b, Powder Metallurgy Product, Hot Isostatically Pressed
Aerospace Current
2001-10-01
AMS5781D Steel Welding Electrodes, Covered, Corrosion And Moderate Heat Resistant 15.5cr 4.5ni 2.9mo 0.10n
Aerospace Current
2001-10-01
AMS4632E Aluminum Bronze Bars And Rods 90cu 8.5al, Hard
Aerospace Current
2001-10-01
AMS5578E Steel, Corrosion And Heat Resistant, Welded Tubing 12Cr – 8.5Ni – 0.30Cb – 1.1Ti – 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2001-10-01
AMS5335F Steel Castings, Sand, 0.65Cr – 0.75Ni – 0.20Mo (0.25 – 0.33C) (SAE 8630 Modified) Normalized And Tempered
Aerospace Current
2001-10-01
AMS5310G Iron Castings, Pearlitic Malleable
Aerospace Current
2001-10-01
AMS5110H Carbon Steel, Wire And Springs 0.75 – 0.88C (SAE 1080) Spring Temper, Cold Drawn
Aerospace Historical
2001-10-01
AMS2451/11 Plating, Brush, Cobalt
Aerospace Historical
2001-10-01
AMS5586F Nickel Alloy, Corrosion And Heat Resistant, Welded Tubing 57Ni – 19.5Cr – 13.5Co – 4.2Mo – 2.9Ti – 1.4Al – 0.006B – 0.08Zr Consumable Electrode Or Vacuum Induction Melted, Annealed
Aerospace Historical
2001-10-01
AMS6435D Steel, Sheet, Strip, And Plate 0.75Mn – 0.78Cr – 1.8Ni – 0.35Mo – 0.20V (0.33 – 0.38C) Vacuum Consumable Electrode Melted, Annealed
Aerospace Historical
2001-10-01
AMS6543C Steel, Bars And Forgings, Maraging 2.0Cr – 10Ni – 8.0Co – 1.0Mo (0.10 – 0.14C) Double Vacuum Melted, Solution Heat Treated
Aerospace Historical
2001-10-01
AMS5120K Steel Strip 0.68 – 0.80C (SAE 1074)
Aerospace Historical
2001-10-01
AS7466A Bolts And Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 Ksi Fatigue Rated Procurement Specification
Aerospace Historical
2001-10-01
AS7470 Bolts And Screws, Steel, Corrosion And Moderate Heat Resistant Heat Treated, Roll Threaded
Aerospace Historical
2001-10-01
AMS6454C Steel, Sheet, Strip, And Plate 1.8Ni – 0.80Cr – 0.25Mo (0.38 – 0.43C) (SAE 4340) Consumable Electrode Melted
Aerospace Historical
2001-10-01
AS4373B Test Methods For Insulated Electric Wire
Aerospace Historical
2001-10-01
AMS4219D Aluminum Alloy Castings 7.0Si – 0.55Mg – 0.12Ti – 0.06Be (A357.0 T61P) Solution And Precipitation Heat Treated
Aerospace Historical
2001-10-01
AMS6444J Steel, Bars, Forgings, And Tubing 1.45Cr (0.98 – 1.10C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Melted
Aerospace Historical
2001-10-01
AS7461 Bolts And Screws, Titanium Alloy 6Al – 4V Fatigue-Rated, Procurement Specification For
Aerospace Historical
2001-10-01
AS24585 SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS
Aerospace Historical
2001-10-01
AIR1810B Design, Development And Test Criteria – Solid State Proximity Switches/Systems For Landing Gear Applications
Aerospace Historical
2001-10-01
AS7471B Bolts And Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 Ksi, Corrosion And Heat Resistant Procurement Specification
Aerospace Historical
2001-10-01
AMS6532B Steel, Bars And Forgings 3.1Cr – 11.5Ni – 13.5Co – 1.2Mo (0.21 – 0.25C) Vacuum Melted, Annealed Heat Treatable To 280 Ksi (1931 MPa) Tensile Strength
Aerospace Historical
2001-10-01
AS9103 Variation Management Of Key Characteristics
Aerospace Historical
2001-10-01
AS5272 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification
Aerospace Historical
2001-10-01
AS9003 Inspection And Test Quality System
Aerospace Historical
2001-10-01
J2570_200109 Performance Specifications For Anthropomorphic Test Device Transducers
Automotive Historical
2001-09-27
J1953_200109 Brake-Stroke Indicator Design Guideline For Cam Or Disc Air-Brake Actuators
Automotive Historical
2001-09-17
AMS6257B Steel Bars, Forgings, And Tubing 1.6Si – 0.82Cr – 1.8Ni – 0.40Mo – 0.08V (0.40 – 0.44C) Consumable Electrode Vacuum Remelted Normalized And Tempered
Aerospace Historical
2001-09-14
J1861_200109 Air Brake Valve Input-Output Characteristic Requirements
Automotive Historical
2001-09-13
J1860_200109 Labeling Air Brake Valves With Their Performance (Input-Output) Characteristics
Automotive Historical
2001-09-13
J2024_200109 Contaminants For Testing Air Brake Components And Auxiliary Pneumatic Devices
Commercial Historical
2001-09-13
J1608_200109 Manual Transmission Shift Patterns
Multiple Historical
2001-09-07
J1459_200109 V-Ribbed Belts And Pulleys
Automotive Historical
2001-09-07
AS960A Drive – Studded, Accessory, 2.653 B.C. Square, Design Standard For
Aerospace Current
2001-09-01
AS961B Drive – Studded, Accessory, 5.000 B.C. Square, Design Standard For
Aerospace Current
2001-09-01
AS962A FLANGE – ACCESSORY, 5.000 BC SQUARE, DESIGN STANDARD FOR
Aerospace Current
2001-09-01
AS963B DRIVE-STUDDED, ACCESSORY, (127) 5.000 BC ROUND, DESIGN STANDARD FOR
Aerospace Current
2001-09-01
AS959B Drive – Studded, Accessory, 2.653 B.C. Square, Design Standard For
Aerospace Current
2001-09-01
AIR853A Disconnect Systems, Accessory Drive Shaft
Aerospace Current
2001-09-01
AS140E HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 90°
Aerospace Historical
2001-09-01
AS139E HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 45°
Aerospace Historical
2001-09-01
AS138E HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 90°
Aerospace Historical
2001-09-01
AS137E HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 45°
Aerospace Historical
2001-09-01
AS136E HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO STRAIGHT
Aerospace Historical
2001-09-01
AS141E HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, 90° TO 90°
Aerospace Historical
2001-09-01
AS4831 Software Interfaces For Ground-Based Monitoring Systems
Aerospace Historical
2001-09-01
AS5166 FITTING, TEE, AIR PRESSURE GAGE
Aerospace Historical
2001-09-01
AMS5560K Steel, Corrosion Resistant, Seamless Tubing 19Cr – 10Ni (SAE 30304) Solution Heat Treated
Aerospace Historical
2001-09-01
J1859_200109 Test Procedures For Determining Air Brake Valve Input-Output Characteristics
Automotive Historical
2001-09-01
AMS7903A Beryllium Bars, Rods, Tubing, And Shapes 4.25Be0 – 94Be High Micro-Yield Strength
Aerospace Historical
2001-09-01
AMS7904B Beryllium Bars, Rods, Tubing, And Shapes High Ductility Grade
Aerospace Historical
2001-09-01
AMS7910A Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered
Aerospace Historical
2001-09-01
AMS7906A Beryllium Bars, Rods, Tubing, And Shapes Standard Grade
Aerospace Historical
2001-09-01
AMS7905A Beryllium Bars, Rods, Tubing, And Shapes Optical Grade
Aerospace Historical
2001-09-01
AMS7907A Beryllium Bars, Rods, Tubing, And Shapes Instrument Grade
Aerospace Historical
2001-09-01
AMS3279A Sealing Compound, Sprayable For Integral Fuel Tanks And Fuel Cell Cavities, For Intermittent Use To 350 °F (171 °C)
Aerospace Historical
2001-09-01
AMS6354E Steel, Sheet, Strip, And Plate 0.75Si – 0.62Cr – 0.20Mo – 0.10Zr (0.10 – 0.17C)
Aerospace Historical
2001-09-01
AMS2362B Stress-Rupture Properties Of Castings
Aerospace Historical
2001-09-01
AMS6356E Steel, Sheet, Strip, And Plate 0.95Cr – 0.20Mo – (0.30 – 0.35C)
Aerospace Historical
2001-09-01
AMS5210B Steel Castings, Investment, Electrical Induction Melted, Annealed
Aerospace Historical
2001-09-01
AMS4338 Aluminum Alloy, Extrusions (2026-T3511) 4.0Cu – 1.3Mg – 0.60Mn Solution Heat Treated And Stress Relieved By Stretching
Aerospace Historical
2001-09-01
AMS4250 Aluminum Alloy, Plate 8.1Zn – 2.3Mg – 1.0Cu – Zr (7449-T7651) Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
2001-09-01
AMS7908A Beryllium Hipped Near-Net Preforms Standard Grade
Aerospace Historical
2001-09-01
AMS6437F Steel, Sheet, Strip, And Plate 5.0Cr – 1.3Mo – 0.50V (0.38 – 0.43C)
Aerospace Historical
2001-09-01
AMSR6130A Rubber, Cellular, Chemically Blown
Aerospace Current
2001-09-01
ARP5606 Composite Honeycomb NDI Reference Standards
Aerospace Historical
2001-09-01
ARP5605 Solid Composite Laminate NDI Reference Standards
Aerospace Historical
2001-09-01
J2057/2_200108 Class A Multiplexing Actuators
Automotive Historical
2001-08-30
J2057/4_200108 Class A Multiplexing Architecture Strategies
Automotive Historical
2001-08-30
J2057/3_200108 Class A Multiplexing Sensors
Automotive Historical
2001-08-30
J1699/1_200108 SAE J1850 Verification Test Procedures
Automotive Historical
2001-08-20
J2473_200108 Self-Propelled Sweepers And Scrubbers–Maximum Gradient Rating During Hopper Discharge
Automotive Historical
2001-08-15
J1729_200108 Parking Brake Drawbar Pull Test Procedure–Commercial Vehicle
Automotive Historical
2001-08-15
J1802_200108 Brake Block Effectiveness Rating
Commercial Historical
2001-08-07
J1037_200108 Windshield Washer Tubing
Automotive Historical
2001-08-07
J2605_200108 Non-Contact Hose Measurement Study 1
Automotive Historical
2001-08-06
J1615_200108 Thread Sealants
Automotive Historical
2001-08-06
J923_200108 Nomenclature And Terminology For Truck And Bus Drive Axles
Commercial Historical
2001-08-03
AS9454A BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3750-24 UNJF-3A
Aerospace Historical
2001-08-01
ARP5403 Aircraft Crash Axes
Aerospace Historical
2001-08-01
AS5402 Design And Performance Criteria Aircraft Crash Axes
Aerospace Historical
2001-08-01
AS25274 CAP. ELECTRICAL (WIRE END, CRIMP STYLE, TYPE II, CLASS 1) FOR 105°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
2001-08-01
AS24333A COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT, FLARED FITTING TO INTERNAL THREAD BOSS
Aerospace Historical
2001-08-01
AS24334A COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING FLARELESS FITTING TO INTERNAL THREAD BOSS
Aerospace Historical
2001-08-01
AS1007E FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS
Aerospace Historical
2001-08-01
AMS7261/2F Rings, Sealing, Phosphonitrilic (Fz) Fluoroelastomer, High-Temperature-Fluid Resistant, 75-85
Aerospace Current
2001-08-01
AMS7261/3E Rings, Sealing, Phosphonitrilic (Fz) Fluoroelastomer, High-Temperature-Fluid Resistant 85-95
Aerospace Current
2001-08-01
AMS7261/1F Rings, Sealing, Phosphonitrilic (Fz) Fluoroelastomer, High-Temperature-Fluid Resistant, 65-75
Aerospace Current
2001-08-01
AMS6266H Steel Bars, Forgings, And Tubing, 0.50cr 1.82ni 0.25mo 0.003b 0.06v (0.08-0.13c)
Aerospace Current
2001-08-01
AMS3217/6A Test Slabs, Phosphonitrilic Fluoroelastomer (Fz), 65-75
Aerospace Current
2001-08-01
AMS7911A Aluminum Beryllium, Preforms Hot Isostatic Pressed 38Al – 62Be
Aerospace Historical
2001-08-01
AMS1420B Coating Removal Process, Aluminum Alloy Coated Cobalt Alloys
Aerospace Current
2001-08-01
AMS1546B Compound, Carbon Removing Orthodichlorobenzene For Engine Parts
Aerospace Current
2001-08-01
AMS1800B Foam, Fire Extinguishing Liquid Protein And Fluoroprotein
Aerospace Current
2001-08-01
AMS1475C Deodorant, Aircraft Toilet, Formaldehyde Base
Aerospace Current
2001-08-01
AMS7262C Rings, Sealing, Ethylene Propylene (Epm) Rubber, Phosphate Ester Hydraulic Fluid Resistant, 85 95
Aerospace Current
2001-08-01
AMS7265C Rings, Sealing, Ethylene Propylene (Epm) Rubber, Phosphate Ester Hydraulic Fluid Resistant, 75 85
Aerospace Current
2001-08-01
AMSS7124A Sealing Compound, Polysulfide, Accelerator Required, For Aircraft Structures
Aerospace Historical
2001-08-01
AMS7261D Rings, Sealing, Phosphonitrilic (Fz) Fluoroelastomer, High-Temperature-Fluid Resistant
Aerospace Current
2001-08-01
AMS3135E Coating Material, Silicone Resin 205°C (400°F) Cure
Aerospace Historical
2001-08-01
AMS3110H Primer Zinc Chromate
Aerospace Historical
2001-08-01
AMS7490N Rings, Flash Welded Corrosion And Heat Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, Or Cobalt Alloys, Or Precipitation-Hardenable Alloys
Aerospace Historical
2001-08-01
AMS7290F Decalcomanias
Aerospace Historical
2001-08-01
AMS3132G Varnish, Phenolic Resin Corrosion-Preventive
Aerospace Historical
2001-08-01
ARP5415 User’s Manual For Certification Of Aircraft Electrical/Electronic Systems For The Indirect Effects Of Lightning
Aerospace Historical
2001-08-01
AS1035D FITTING, TEE, STANDARD AND REDUCER, FLARED
Aerospace Historical
2001-08-01
AMS7272F Rings, Sealings, Butadiene-Acrylonitrile (NBR) Rubber Synthetic Lubricant Resistant 65 – 75
Aerospace Historical
2001-08-01
AMS4120P Aluminum Alloy, Rolled Or Cold Finished Bars, Rods, And Wire 4.4Cu – 1.5Mg – 0.60Mn (2024) Solution Heat Treated And Naturally Aged (T4) Solution Heat Treated, Cold Worked, And Naturally Aged (T351)
Aerospace Historical
2001-08-01
AMS1424D Deicing/Anti-Icing Fluid, Aircraft SAE Type I
Aerospace Historical
2001-08-01
AMS2644B Inspection Material, Penetrant
Aerospace Historical
2001-08-01
AS33671B STRAP, TIEDOWN, ELECTRICAL COMPONENTS, ADJUSTABLE, SELF-CLINCHING, PLASTIC, TYPE I, CLASS 1
Aerospace Historical
2001-08-01
AS8879B Screw Threads – UNJ Profile, Inch
Aerospace Historical
2001-08-01
AMS3644F Polyimide, Molded Rod, Bar, And Tube, Plaque, And Formed Parts
Aerospace Historical
2001-08-01
AS5202 PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD
Aerospace Historical
2001-08-01
AS8037A Minimum Performance Standard For Aircraft Position Lights
Aerospace Historical
2001-08-01
AS9100A Quality Systems – Aerospace – Model For Quality Assurance In Design, Development, Production, Installation And Servicing
Aerospace Historical
2001-08-01
J851_200107 Dimensions–Wheels For Demountable Rims, Demountable Rims,And Spacer Bands–Commercial Vehicles
Commercial Historical
2001-07-31
ARINC738A-1 AIR DATA AND INERTIAL REFERENCE SYSTEM (ADIRS)
Aerospace Current
2001-07-31
J624_200107 Tapped And Flanged Exhaust Connections For Small Engines
Commercial Current
2001-07-31
J179_200107 Labeling–Disc Wheels And Demountable Rims–Trucks
Automotive Historical
2001-07-31
J514_200107 Hydraulic Tube Fittings
Commercial Historical
2001-07-31
J1817_200107 Long-Stroke Air-Brake Actuator Marking
Commercial Historical
2001-07-30
MS1002_200107 Lubricants, Industrial Oils, And Related Products Type
Automotive Historical
2001-07-30
J1113/26_200107 Electromagnetic Compatibility Measurement Procedure For Vehicle Components–Immunity To AC Power Line Electric Fields
Automotive Historical
2001-07-30
J343_200107 Test And Test Procedures For SAE 100R Series – Hydraulic Hose And Hose Assemblies
Automotive Historical
2001-07-24
MS1006_200107 Lubricants, Industrial Oils, And Related Products Type
Automotive Historical
2001-07-18
J393_200107 Nomenclature—Wheels, Hubs, And Rims For Commercial Vehicles
Commercial Historical
2001-07-16
J663_200107 Rivets For Brake Linings And Bolts For Brake Blocks
Commercial Historical
2001-07-03
J1469_200107 Air Brake Actuator Test Procedure, Truck-Tractor, Bus, And Trailers
Automotive Historical
2001-07-03
AS21152C BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, HOLLOW SHANK, SELF-ALIGNING, AIRFRAME, TYPE IV, -65° TO 300°F
Aerospace Historical
2001-07-01
AS21150C BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, SOLID SHANK, SELF-ALIGNING, AIRFRAME, TYPE I, -65° TO 300°F
Aerospace Historical
2001-07-01
AS51997 RING, LOCK, SERRATED-HIGH STRENGTH
Aerospace Historical
2001-07-01
AS85049/41 CONNECTOR ACCESSORIES, ELECTRICAL, NONENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-C-5015 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS)
Aerospace Historical
2001-07-01
AS85049/8 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90°, SHIELD TERMINATION, CATEGORY 1A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AS16842 CLAMP, WIRE, ROPE, SADDLED, SINGLE GRIP, STEEL
Aerospace Historical
2001-07-01
AS18607A Thermal Anti-Icing Equipment, Wing And Empennage
Aerospace Current
2001-07-01
AS21153C BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, INTERNAL THREAD, SELF-ALIGNING, AIRFRAME, TYPE IV, -65° TO 300°F
Aerospace Historical
2001-07-01
AIR5359A Requirements For Registration Of Quality Systems To AS9000 Or AS9100
Aerospace Historical
2001-07-01
AS85049/54 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, 45°, CATEGORY 4C (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AIR1839B A Guide To Aircraft Turbine Engine Vibration Monitoring Systems
Aerospace Historical
2001-07-01
AS85049/26 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AS85049/55 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, 90°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AS85049/6 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45°, SHIELD TERMINATION, CATEGORY 1A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AS85049/96 CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE FLANGE TYPE, 1/4 MOUNTING PERIMETER DEVICE, TYPE III (LIGHT DUTY)
Aerospace Historical
2001-07-01
AS8804A Deicing System, Pneumatic Boot, Aircraft, General Specification For
Aerospace Current
2001-07-01
AS9218A BOLT, MACHINE – STEEL, DIFFUSED NICKEL -CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A
Aerospace Historical
2001-07-01
AS50141 Tube, Pneumatic Tire, Aircraft
Aerospace Historical
2001-07-01
AS85049/34 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, THREADED ADAPTER, CATEGORY 3C (FOR MIL-C-26482 SERIES I JAM NUT RECEPTACLE CONNECTOR)
Aerospace Historical
2001-07-01
AS85049/94 CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE FLANGE TYPE, FULL MOUNTING PERIMETER DEVICE, TYPE I (HEAVY DUTY)
Aerospace Historical
2001-07-01
AS85049/95 CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE FLANGE TYPE, 3/4 MOUNTING PERIMETER DEVICE, TYPE II (MEDIUM DUTY)
Aerospace Historical
2001-07-01
AS85049/9 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90°, CATEGORY 1A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AS402B Automatic Pilots
Aerospace Historical
2001-07-01
AS400B Cargo Compartment Fire Detection Instruments (Reciprocating Engine Powered Aircraft)
Aerospace Current
2001-07-01
AS85049/10 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AS85049/7 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45°, CATEGORY 1A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AS9203A GASKET – METAL O-RING, .094 TUBE X .006 WALL, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9204A GASKET – METAL O-RING, .094 TUBE X .010 WALL, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9205A GASKET – METAL O-RING, .125 TUBE X .010 WALL, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9376A GASKET – METAL O-RING, .125 TUBE X .010 WALL, SILVER PLATED, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS51990 RING, LOCK, SERRATED
Aerospace Historical
2001-07-01
AS85049/11 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AS9372A GASKET – METAL O-RING, .062 TUBE X .006 WALL, SILVER PLATED, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9371A GASKET – METAL O-RING, .035 TUBE X .006 WALL, SILVER PLATED, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9202A GASKET – METAL O-RING, .062 TUBE X .010 WALL, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9141A GASKET – METAL O-RING, .035 TUBE X .006 WALL, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9142A GASKET – METAL O-RING, .062 TUBE X .006 WALL, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9375A GASKET – METAL O-RING, .094 TUBE X .010 WALL, SILVER PLATED, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS9374A GASKET – METAL O-RING, .094 TUBE X .006 WALL, SILVER PLATED, CRES – UNS S32100
Aerospace Historical
2001-07-01
AS85049/53 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, STRAIGHT, CATEGORY 4C (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2001-07-01
AMSWWT700/4 Tube, Aluminum Alloy, Drawn, Seamless, 5052
Aerospace Historical
2001-07-01
AMSWWT700/7 Tube, Aluminum Alloy, Drawn, Seamless, 7075
Aerospace Historical
2001-07-01
AMS6473A Steel Welding Wire 0.88Cr – 1.8Ni – 1.6Co – 0.42Mo – 0.08V – (0.28 – 0.33C) (SAE 4330V) Vacuum Melted, Environment Controlled Packaging
Aerospace Historical
2001-07-01
AMS6331A STEEL, WELDING WIRE 0.50Cr – 0.55Ni – 0.20Mo – (0.33 – 0.38C) (SAE 8735) Vacuum Melted, Environment Controlled Packaging
Aerospace Historical
2001-07-01
AMS6550J Steel Tubing, Welded, 0.50ni 0.55cr 0.20mo (0.28 0.33c) (SAE 8630)
Aerospace Current
2001-07-01
AMSS29574 Sealing Compound, Polythioether, For Aircraft Structures, Fuel And High Temperature Resistant, Fast Curing At Ambient And Low Temperatures
Aerospace Historical
2001-07-01
AMS6546F Steel Sheet, Strip, And Plate 0.48cr 8.0ni 4.0co 0.48mo 0.09v (0.24-0.30c) Consumable Electrode Melted, Annealed
Aerospace Current
2001-07-01
AMS6535H Steel Tubing, Seamless, 0.50cr 0.55ni 0.20mo (0.28 0.33c)
Aerospace Current
2001-07-01
ARINC738-3 GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
Aerospace Current
2001-07-01
AMSWWT700/2 Tube, Aluminum, Alloy, Drawn, Seamless, 3003
Aerospace Historical
2001-07-01
AMSWWT700/1 Tube, Aluminum, Drawn, Seamless, 1100
Aerospace Historical
2001-07-01
AMS5329F Steel Castings, Sand, 0.80cr 1.8ni 0.35mo (0.28-0.36c) Annealed
Aerospace Current
2001-07-01
AMSC27725A Coating, Corrosion Preventative, Polyurethane For Aircraft Integral Fuel Tanks For Use To 250 °F (121 °C)
Aerospace Historical
2001-07-01
AMS6272J Steel Bars, Forgings, And Tubing 0.50Cr – 0.55Ni – 0.20Mo (0.15 – 0.20C) (SAE 8617)
Aerospace Historical
2001-07-01
AMS5210A Steel Castings, Investment, Electrical Induction Melted, Annealed
Aerospace Historical
2001-07-01
AMS6406D Steel Sheet, Strip, And Plate, 1.6si 2.1cr 0.58mo 0.05v(0.41-0.46c), Annealed
Aerospace Current
2001-07-01
AMS6455H Steel, Sheet, Strip, And Plate 0.95Cr – 0.22V (0.48 – 0.53C) (SAE 6150)
Aerospace Historical
2001-07-01
AMS6257A Steel Bars, Forgings, And Tubing 1.6Si – 0.82Cr – 1.8Ni – 0.40Mo – 0.08V (0.40 – 0.44C) Consumable Electrode Vacuum Remelted Normalized And Tempered
Aerospace Historical
2001-07-01
AMSWWT700 Tube, Aluminum And Aluminum Alloy, Drawn, Seamless, General Specification For
Aerospace Historical
2001-07-01
AS5877 Detailed Specification For Aircraft Pressure Refueling Nozzle
Aerospace Historical
2001-07-01
AS9373A GASKET – METAL O-RING, .062 TUBE X .010 WALL, SILVER PLATED, CRES – UNS S32100
Aerospace Historical
2001-07-01
AMS3265A Sealing Compound, Polysulfide (T) Rubber, Nonchromated, Corrosion Inhibiting For Intermittent Use To 360 °F (182 °C)
Aerospace Historical
2001-07-01
AMSWWT700/5 Tube, Aluminum Alloy, Drawn, Seamless, 5086
Aerospace Historical
2001-07-01
AMSP5315A Butadiene – Acrylonitrile (NBR) Rubber For Fuel-Resistant Seals 60 To 70
Aerospace Historical
2001-07-01
AMS2300J Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure
Aerospace Historical
2001-07-01
AMSWWT700/6 Tube, Aluminum Alloy, Drawn, Seamless, 6061
Aerospace Historical
2001-07-01
AS21151C BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, EXTERNAL THREAD, SELF-ALIGNING, AIRFRAME, TYPE II, -65° TO 300°F
Aerospace Historical
2001-07-01
AMS5678E Steel, Corrosion Resistant, Wire 17Cr – 7.1Ni – 1.1Al Cold Drawn, Precipitation-Hardenable
Aerospace Historical
2001-07-01
AMS5732H Steel, Corrosion And Heat Resistant, Bars, Wire, Forgings, Tubing, And Rings 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Consumable Electrode Melted 1800 °F (982 °C) Solution And Precipitation Heat Treated
Aerospace Historical
2001-07-01
AS22759 Wire, Electrical, Fluoropolymer-Insulated, Copper Or Copper Alloy
Aerospace Historical
2001-07-01
AMSWWT700/3 Tube, Aluminum Alloy, Drawn, Seamless, 2024
Aerospace Historical
2001-07-01
J759_200106 Lighting Identification Code
Automotive Historical
2001-06-30
J1939/73_200106 Application Layer–Diagnostics
Automotive Historical
2001-06-30
J1712_200106 Reporting On Emission Testing For In-Use Light-Duty Trucks And Passenger Vehicles
Automotive Current
2001-06-27
AMS5644C STEEL BARS AND FORGINGS, CORROSION RESISTANT 17Cr – 7Ni – 1Al
Aerospace Historical
2001-06-27
J1946_200106 Companion Flanges, Type A (External Pilot) And Type S (Internal Pilot)
Automotive Historical
2001-06-25
J1342_200106 Test Method For Determining Power Consumptionof Engine Cooling Fan-Drive Systems
Automotive Historical
2001-06-25
J2054_200106 E/E Diagnostic Data Communications
Automotive Current
2001-06-21
J2037_200106 Off-Board Diagnostic Message Formats
Automotive Current
2001-06-21
J34_200106 Exterior Sound Level Measurement Procedure For Pleasure Motorboats
Automotive Historical
2001-06-14
MS1005_200106 Lubricants, Industrial Oils, And Related Products Type Hf Fire-Resistant Hydraulic Fluids–Specification
Automotive Historical
2001-06-13
J2133_200106 Disc Wheel Radial Runout Low Point Marking
Commercial Historical
2001-06-12
J1731_200106 Pilot Bearings For Truck And Bus Applications
Commercial Historical
2001-06-12
J336_200106 Sound Level For Truck Cab Interior
Commercial Historical
2001-06-12
J1610_200106 Test Method For Evaluating The Sealing Capability Of Hose Connectionswith A PVT Test Facility
Automotive Historical
2001-06-08
AIR5493 Requirements For Development, Implementation And Control Of An Aerospace Auditor Training
Aerospace Historical
2001-06-01
ARP582B Lighting, Integral, For Aircraft Instruments: Criteria For Design Of Red Incandescent Lighted Instruments
Aerospace Historical
2001-06-01
AS13591A Cleaning Methods And Procedures For Breathing Oxygen Equipment
Aerospace Current
2001-06-01
AS5134 Aviation Distress Signal
Aerospace Historical
2001-06-01
MAM2304A Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2001-06-01
AMS6436C Steel Sheet, Strip, And Plate, Low-Alloy, Heat Resistant, 0.65si 1.25cr 0.50mo 0.85v (0.25 0.30c), Annealed
Aerospace Current
2001-06-01
AMSS85420 Sealing Compounds, Quick Repair, Low Temperature Curing Polysulfide, For Aircraft Structures
Aerospace Historical
2001-06-01
AMS6379B Bars, Die Drawn, 0.95cr 0.29mo 0.05te (0.40-0.53c), Tempered, 165,000 Psi Yield
Aerospace Current
2001-06-01
AMS3755B Powder, Fumed Silicon Dioxide
Aerospace Historical
2001-06-01
AMS2429B Plating, Bronze Nitriding Stop-Off 90Cu – 10Sn
Aerospace Historical
2001-06-01
AS7949A Bearings, Ball, Airframe, Antifriction, General Standard For
Aerospace Historical
2001-06-01
AMS5581D Nickel Alloy, Corrosion And Heat Resistant, Seamless Or Welded Tubing 62Ni – 21.5Cr – 9.0Mo – 3.7Cb Annealed
Aerospace Historical
2001-06-01
AMS5622C Steel Bars, Wire, Forgings, Tubing, And Rings, Corrosion Resistant 16Cr – 4.0Ni – 0.30(Cb + Ta) – 4.0Cu Solution Heat Treated, Consumable Electrode Melted Precipitation Hardenable
Aerospace Historical
2001-06-01
J846_200105 Coding Systems For Identification Of Fluid Conductors And Connectors
Automotive Historical
2001-05-31
J2039_200105 Side Turn Signal Lamps For Large Vehicles
Automotive Historical
2001-05-30
J2284_200105 High Speed CAN (HSC) For Passenger Vehicle Applications
Automotive Current
2001-05-30
MS1007_200105 Lubricants, Industrial Oils, And Related Products Type G Slideway Lubricants–Specification
Automotive Historical
2001-05-30
J1850_200105 Class B Data Communications Network Interface
Automotive Historical
2001-05-30
J2284/3_200105 High-Speed Can (Hsc) For Vehicle Applications At 500 Kbps
Automotive Historical
2001-05-30
J2370_200105 Geometric Dimensions And Tolerancing For Curved Hose
Automotive Historical
2001-05-25
JA1005_200105 Software Supportability Program Implementation Guide
Automotive Historical
2001-05-21
J1875_200105 Materials For Plastic Check Valves For Vacuum Booster Systems
Automotive Current
2001-05-14
J1876_200105 Plastic Dust Shield For Hydraulic Disc Brakes
Automotive Historical
2001-05-14
J2542_200105 Self-Propelled Sweepers And Scrubbers Fuel Consumption Of Non-Propulsion Auxiliary Engines
Automotive Historical
2001-05-14
J1568_200105 Materials For Plastic Pistons For Hydraulic Disc Brake Cylinders
Automotive Historical
2001-05-14
J2521_200105 Disc And Drum Brake Dynamometer Squeal Noise Matrix
Automotive Historical
2001-05-14
AS85421/15 FITTING, ELBOW, 45°, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
Aerospace Historical
2001-05-01
AS85421/17 FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON BRANCH, MALE ENDS
Aerospace Historical
2001-05-01
AS85421/13 FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
Aerospace Historical
2001-05-01
AS85421/12 FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, MALE TO MALE
Aerospace Historical
2001-05-01
AS85421/14 FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, MALE TO FEMALE
Aerospace Historical
2001-05-01
ARP901A Bubble-Point Test Method
Aerospace Historical
2001-05-01
AS85421/16 FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON RUN, MALE ENDS
Aerospace Historical
2001-05-01
AS153E HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRIAGHT TO STRAIGHT, FLARED, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS154D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 45°, FLARED, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS155D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 90°, FLARED, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS156D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 45°, FLARED, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS157D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 90°, FLARED, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS158D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 90° TO 90°, FLARED, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS5491A Calculation Of Electron Vacancy Number In Superalloys
Aerospace Historical
2001-05-01
AS120E HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 90° TO 90°, FLARELESS LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS118E HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 45°, FLARELESS, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS119E HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 90°, FLARELESS LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS115E HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO STRAIGHT, FLARELESS, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS117E HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 90°, FLARELESS, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS35411 Fittings, Lubrication
Aerospace Historical
2001-05-01
AMSG81937 Grease, Instrument, Ultra-Clean, Metric
Aerospace Historical
2001-05-01
AMSG81827 Grease, Aircraft, High Load Capacity, Wide Temperature Range
Aerospace Historical
2001-05-01
AMS6446D Steel, Bars, Forgings, And Tubing 1.0Cr (0.98 – 1.10C) (SAE 51100) Electroslag Remelted
Aerospace Historical
2001-05-01
MAM2300B Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2001-05-01
AMS7238B Alloy Pm Shapes, Corrosion, Wear, And Heat Resistant 56co 30cr 8.25w (1.10-1.90c)
Aerospace Current
2001-05-01
AMS7912A Aluminum-Beryllium Alloy, Extrusions 38Al – 62Be Annealed
Aerospace Historical
2001-05-01
AMS7913A Aluminum-Beryllium Alloy, Sheet And Plate 38Al – 62Be
Aerospace Historical
2001-05-01
AMSD81956 Detergent, External Removable Fuel Tanks
Aerospace Historical
2001-05-01
AMSS7916A Sealing Compound, Thread And Gasket, Fuel, Oil, And Water Resistant
Aerospace Historical
2001-05-01
AMSR81828 Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet And Molded Shapes, Ozone Resistant
Aerospace Historical
2001-05-01
AMS5783F Steel Welding Electrodes, Covered, Corrosion And Heat Resistant, 19.5cr 8.8ni 0.50mo 1.5w 1.0cb
Aerospace Current
2001-05-01
AMS5806C Alloy Welding Wire, Corrosion And Heat Resistant, Low Expansion, 42Fe – 38Ni – 15Co – 3.0 (Cb + Ta) – 1.4Ti – 0.92Al, Vacuum Melted
Aerospace Current
2001-05-01
AMS5828C ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT 57Ni – 19.5Cr – 13.5Co – 4.2Mo – 3.1Ti – 1.4Al – 0.006B Vacuum Induction Melted
Aerospace Historical
2001-05-01
AMS5603E Sheet And Strip 15cr 8.4ni 2.2mo 1.1al Vacuum Induction Melted, Solution Heat Treated
Aerospace Current
2001-05-01
AMS5693C Steel, Corrosion Resistant, Wire 18cr 9.0ni Cryogenically Produced, High Tensile Strength
Aerospace Current
2001-05-01
AMS5355G Steel, Corrosion Resistant, Investment Castings 16Cr – 4.1Ni – 0.28Cb – 3.2Cu Homogenization And Solution Heat Treated Or Homogenization, Solution, And Precipitation Heat Treated
Aerospace Historical
2001-05-01
AMSQQW428/2 Wire, Steel, High Carbon, Round, Type III
Aerospace Historical
2001-05-01
AMSQQW428/1 Wire, Steel, High Carbon, Round, Type I
Aerospace Historical
2001-05-01
AMS6434E Steel, Sheet, Strip, And Plate 0.78Cr – 1.8Ni – 0.35Mo – 0.20V (0.33 – 0.38C)
Aerospace Historical
2001-05-01
AMS6445F Steel, Bars, Forgings, And Tubing 1.05Cr – 1.1Mn (0.92 – 1.02C) (Modified 51100) Consumable Electrode Vacuum Melted
Aerospace Historical
2001-05-01
AMS4930E Titanium Alloy Bars, Wire, Forgings, And Rings 6Al – 4V, Extra Low Interstitial Annealed
Aerospace Historical
2001-05-01
AMS5047E Steel, Sheet And Strip 0.08 – 0.13C, Aluminum Killed Deep Forming Grade
Aerospace Historical
2001-05-01
AS116E HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 45° FLARELESS, LIGHTWEIGHT
Aerospace Historical
2001-05-01
AS5505 Requirements For Accreditation Of Testing Laboratories For Organic Coatings
Aerospace Historical
2001-05-01
AMS4439E Magnesium Alloy Castings 4.2Zn – 1.2Ce – 0.7Zr (ZE41A-T5) Precipitation Heat Treated
Aerospace Historical
2001-05-01
AMS3216F Fluorocarbon (FKM) Rubber High-Temperature – Fluid Resistant Low Compression Set 70 To 80
Aerospace Historical
2001-05-01
AMS3218B Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 To 95
Aerospace Historical
2001-05-01
AMS5046B Carbon Steel, Sheet, Strip, And Plate (SAE 1020 And 1025) Annealed
Aerospace Historical
2001-05-01
AMS7259D Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 To 95
Aerospace Historical
2001-05-01
AMS2300H Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure
Aerospace Historical
2001-05-01
AMS4900L Titanium Sheet, Strip, And Plate Commercially Pure Annealed, 55.0 Ksi (379 MPa) Yield Strength
Aerospace Historical
2001-05-01
AMS4967H Titanium Alloy, Bars, Wire, Forgings, And Rings 6.0Al – 4.0V Annealed, Heat Treatable
Aerospace Historical
2001-05-01
AMS4945B Titanium Alloy Tubing, Seamless, Hydraulic 3Al – 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved
Aerospace Historical
2001-05-01
AMS6512D Steel, Bars, Forgings, Tubing, And Rings 18Ni – 7.8Co – 4.9Mo – 0.40Ti – 0.10Al Consumable Electrode Vacuum Melted, Annealed
Aerospace Historical
2001-05-01
AMS4944F Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al – 2.5V Cold Worked, Stress Relieved
Aerospace Historical
2001-05-01
AMS7276G Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 To 80
Aerospace Historical
2001-05-01
J211/2_200105 Instrumentation For Impact Test–Part 2: Photographic Instrumentation
Automotive Historical
2001-05-01
AMS7239B Alloy Pm Shapes, Corrosion, Wear, And Heat Resistant 60co 29cr 4.5w (0.90-1.40c)
Aerospace Current
2001-05-01
J852_200104 Front Cornering Lamps For Use On Motor Vehicles
Automotive Historical
2001-04-30
J1942/1_200104 Qualified Hoses For Marine Applications
Automotive Historical
2001-04-30
J2228_200104 Kingpin Wear Limits–Commercial Trailers And Semitrailers
Commercial Historical
2001-04-27
J1266_200104 Axle Efficiency Test Procedure
Commercial Current
2001-04-27
J848_200104 Fifth Wheel Kingpin, Heavy-Duty–Commercial Trailers And Semitrailers
Commercial Historical
2001-04-27
J366_200104 Exterior Sound Level For Heavy Trucks And Buses
Commercial Historical
2001-04-27
J700_200104 Upper Coupler Kingpin–Commercial Trailers And Semitrailers
Commercial Historical
2001-04-27
J1416_200104 Generator Terminal Labeling
Automotive Current
2001-04-26
J2548_200104 Test Method To Obtain Lug-Up Torque Data For Heavy-Duty Truck And Bus Engines
Commercial Current
2001-04-25
J2568_200104 Instrusion Resistance Of Safety Glazing Systems For Road Vehicles
Automotive Historical
2001-04-24
J517_200104 Hydraulic Hose
Automotive Historical
2001-04-16
J1466_200102 Passenger Car And Light Truck Tire Dynamic Driving Traction In Snow
Automotive Current
2001-04-12
AMS3370A Silicone Resin, Elastomeric, Transparent Room Temperature Cure
Aerospace Historical
2001-04-09
AMS3336D Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 55 – 65
Aerospace Historical
2001-04-09
AMS3362C Silicone Rubber Compound Room Temperature Vulcanizing, 15,000 Centipoise Viscosity Durometer 35 – 55
Aerospace Historical
2001-04-09
AMS3368A Silicone Resin, Elastomeric, Transparent Elevated Temperature Cure
Aerospace Historical
2001-04-09
AMS3726/2A Shims, Filled Resin Compound Precatalyzed Sheet
Aerospace Historical
2001-04-09
AMS3372A Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
Aerospace Historical
2001-04-09
AMS3726/3A Shims, Filled Resin Compound Liquid Precatalyzed
Aerospace Historical
2001-04-09
AMS7284/2 Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel-Resistant 75 – 85 Shore A
Aerospace Historical
2001-04-09
AMS7284/1 Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel Resistant 65 – 75 Shore A
Aerospace Historical
2001-04-09
AMS3194C Silicone Rubber Sponge Closed Cell, Firm, Extreme Low Temperature
Aerospace Historical
2001-04-09
AMS3193C Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
Aerospace Historical
2001-04-09
AMS3332D Silicone Rubber Extreme Low-Temperature Resistant 15 – 30
Aerospace Historical
2001-04-09
AMS3320G Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat And Weather Resistant 60 – 80
Aerospace Historical
2001-04-09
AMS3328A Fluorosilicone (FVMQ) Rubber Fuel And Oil Resistant 35 – 45
Aerospace Historical
2001-04-09
AMS3327C Fluorosilicone (FVMQ) Rubber High Temperature Fuel And Oil Resistant 70 – 80
Aerospace Historical
2001-04-09
AMS3304G Silicone, Rubber General Purpose 70 Durometer
Aerospace Historical
2001-04-09
AMS3325D Fluorosilicone (FVMQ) Rubber Fuel And Oil Resistant 55 – 65
Aerospace Historical
2001-04-09
J2050_200104 High-Temperature Power Steering Pressure Hose
Automotive Historical
2001-04-02
J2076_200104 High-Temperature Power Steering Return Hose–Low Pressure
Automotive Historical
2001-04-02
AMS3335D Silicone Rubber Extreme Low-Temperature Resistant 45 – 55
Aerospace Historical
2001-04-01
AIR4253A Description Of Actuation Systems For Aircraft With Fly-By-Wire Flight Control Systems
Aerospace Historical
2001-04-01
AMS3238E Butyl (IIR) Rubber Phosphate Ester Resistant 65 – 75
Aerospace Historical
2001-04-01
AMS3363D Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Durometer 30 – 45
Aerospace Historical
2001-04-01
AMS3364C Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, Durometer 35 – 55
Aerospace Historical
2001-04-01
AMS7284A Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel-Resistant
Aerospace Historical
2001-04-01
ARP5448/8 Plain Spherical Bearing Radial And Axial Clearance Measurement
Aerospace Historical
2001-04-01
ARP266A Installation, Heaters, Airplane, Internal Combustion Heater Exchange Type
Aerospace Current
2001-04-01
AS51007 GASKET, RUBBER, SYNTHETIC
Aerospace Historical
2001-04-01
ARP906B Glossary, Aircraft Engine Starting And Auxiliary Power Systems
Aerospace Current
2001-04-01
AS9568A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, AMS 5731, .375-24 UNJF-3A
Aerospace Historical
2001-04-01
AMS2435F Coating, Tungsten Carbide-Cobalt Detonation Process
Aerospace Historical
2001-04-01
AMS4902G Titanium Sheet, Strip, And Plate Commercially-Pure Annealed 40.0 Ksi (276 MPa) Yield Strength
Aerospace Historical
2001-04-01
AS8671-4 AS8671 Capping (Cable Duct) 1.28″ Wide Fire Resistant
Aerospace Current
2001-04-01
AMSP81985 Peening Of Metals
Aerospace Historical
2001-04-01
AMSL81846 Lubricating Oil, Instrument, Ball Bearing, High Flash Point
Aerospace Historical
2001-04-01
AMSR81841 Rotary Flap Peening Of Metal Parts
Aerospace Historical
2001-04-01
AMST81533 Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing
Aerospace Historical
2001-04-01
AMST81556 Titanium And Titanium Alloys, Extruded Bars And Shapes, Aircraft Quality
Aerospace Historical
2001-04-01
AMS5035 Steel, Welding Wire 0.65Si – 1.25Cr – 0.50Mo – 0.30V (0.28 – 0.33C)
Aerospace Historical
2001-04-01
AMS5777E Steel, Corrosion Resistant, Covered Welding Electrodes 12.5cr
Aerospace Current
2001-04-01
AMS3570E Foam, Flexible Polyurethane Open Cell, Medium Flexibility
Aerospace Historical
2001-04-01
AMS3251G Synthetic Rubber And Cork Composition General Purpose Medium
Aerospace Historical
2001-04-01
AMS3375B Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
Aerospace Historical
2001-04-01
AMS5549F STEEL, CORROSION AND HEAT RESISTANT, PLATE 15.5Cr – 4.5Ni – 2.9Mo – 0.10N Solution Heat Treated
Aerospace Historical
2001-04-01
AMSP29609 Polyimide Retainer Material, Porous Non-Metallic
Aerospace Historical
2001-04-01
AMS5034 Steel, Welding Wire 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130)
Aerospace Historical
2001-04-01
AMS5040L Steel, Sheet And Strip 0.15 Carbon, Maximum Deep Forming Grade
Aerospace Historical
2001-04-01
AMS2360C Room Temperature Tensile Properties Of Castings
Aerospace Historical
2001-04-01
AMS2361C Elevated Temperature Tensile Properties Of Castings
Aerospace Historical
2001-04-01
AMS6282H Steel Tubing, Mechanical 0.50Cr – 0.55Ni – 0.25Mo (0.33 – 0.38C) (SAE 8735)
Aerospace Historical
2001-04-01
AMS3334D Silicone Rubber Extreme Low-Temperature Resistant 35 – 45
Aerospace Historical
2001-04-01
AMS3867/3B Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E374 (Type B0.203-E190)
Aerospace Historical
2001-04-01
AMS3867/2B Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E374 (Type B0.142-E190)
Aerospace Historical
2001-04-01
AMS3867/5A Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E180 (Type B0.142-E82)
Aerospace Historical
2001-04-01
AMS3867/4A Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82)
Aerospace Historical
2001-04-01
AMS3867/1B Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E374 (Type B0.102-E191)
Aerospace Historical
2001-04-01
AMS3867/6A Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E180 (Type B0.203-E82)
Aerospace Historical
2001-04-01
AMS3867B Boron Filament Tape, Epoxy-Resin-Impregnated
Aerospace Historical
2001-04-01
AMS6523E Steel, Sheet, Strip, And Plate 0.75Cr – 9.0Ni – 4.5Co – 1.0Mo – 0.09V (0.17 – 0.23C) Vacuum Consumable Electrode Melted, Annealed
Aerospace Historical
2001-04-01
AMS3248B Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55 – 65
Aerospace Historical
2001-04-01
AMS6476B Steel, Bars, Forgings, And Tubing 0.50Cr – 0.12Mo (0.89 – 1.01C)
Aerospace Historical
2001-04-01
AMS6447E Steel, Bars, Forgings, And Tubing 1.4Cr (0.98 – 1.10C) (SAE 52100) Electroslag Remelted
Aerospace Historical
2001-04-01
AMSH81200 Heat Treatment Of Titanium And Titanium Alloys
Aerospace Historical
2001-04-01
AMS7273C Rings, Sealing, Fluorosilicone (FVMQ) Rubber High Temperature Fuel And Oil Resistant 70 – 80
Aerospace Historical
2001-04-01
AMS5726C Steel, Corrosion And Heat Resistant, Bars And Wire 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V 1800 °F (982 °C) Solution Heat Treated And Work-Strengthened Consumable Electrode Melted 200 Ksi (1379 MPa) Tensile Strength
Aerospace Historical
2001-04-01
AMS4347B Aluminum Alloy Sheet 1.0Mg – 0.8Si – 0.8Cu – 0.5Mn (6013-T4) Solution Heat Treated And Naturally Aged
Aerospace Historical
2001-04-01
AMS2310E Qualification Sampling And Testing Of Steels Transverse Tensile Properties
Aerospace Historical
2001-04-01
AMS3715C Core, Honeycomb, Glass/Phenolic
Aerospace Historical
2001-04-01
AMS2402H Plating, Zinc
Aerospace Historical
2001-04-01
AMS2406J Plating, Chromium Hard Deposit
Aerospace Historical
2001-04-01
J583_200104 Front Fog Lamp
Automotive Historical
2001-04-01
AMS7267G Rings, Sealing, Silicone (VSI) Rubber Heat-Resistant, Low Compression Set 70 – 80
Aerospace Historical
2001-04-01
AMS3568A Sheet, Polyether Urethane (EU) Elastomer Foam Shock Absorbing
Aerospace Historical
2001-04-01
AMS3305H Silicone, Rubber General Purpose 80 Durometer
Aerospace Historical
2001-04-01
AMS5936 Steel, Corrosion Resistant, Bars, Wire, And Forgings 12Cr – 11Ni – 1.7Ti – 1Mo Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2001-04-01
AMS2759/9A Hydrogen Embrittlement Relief (Baking) Of Steel Parts
Aerospace Historical
2001-04-01
AMS2427C Aluminum Coating Ion Vapor Deposition
Aerospace Historical
2001-04-01
AMS4928Q Titanium Alloy Bars, Wire, Forgings, Rings, And Drawn Shapes 6Al – 4V Annealed
Aerospace Historical
2001-04-01
AS4059D Aerospace Fluid Power – Cleanliness Classification For Hydraulic Fluids
Aerospace Historical
2001-04-01
J1939/21_200104 Data Link Layer
Commercial Historical
2001-04-01
USCAR2 Performance Standard For Automotive Electrical Connection Systems
Automotive Historical
2001-04-01
J1992_200103 Wheels/Rims–Military Vehicles–Test Procedures And Performance Requirements
Commercial Historical
2001-03-31
J377_200103 Vehicular Traffic Sound Signaling Devices
Automotive Historical
2001-03-26
AMS4984B Titanium Alloy Forgings 10V – 2Fe – 3Al Consumable Electrode Melted, Solution Heat Treated And Aged 173 Ksi (1193 MPa) Tensile Strength
Aerospace Historical
2001-03-24
J1273_200103 Recommended Practices For Hydraulic Hose Assemblies
Automotive Historical
2001-03-21
J2457_200103 Air Quality For Air Braked Vehicles
Automotive Historical
2001-03-20
J2139_200103 Test For Signal And Marking Devices Used On Vehicles 2032 Mm Or More In Overall Width
Automotive Historical
2001-03-16
J1927_200103 Cumulative Damage Analysis For Hydraulic Hose Assemblies
Automotive Historical
2001-03-14
J2545_200103 Test Procedures For Non-SAE Hydraulic Hoses
Automotive Historical
2001-03-14
J1237_200103 Metric Thread Rolling Screws
Automotive Historical
2001-03-12
J1102M_200103 Mechanical And Material Requirements For Metric Wheel Bolts
Automotive Historical
2001-03-12
J1199_200103 Mechanical And Material Requirements For Metric Externally Threaded Steel Fasteners
Automotive Historical
2001-03-12
AMSC83445A Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective
Aerospace Current
2001-03-09
AMSC83231A Coatings, Polyurethane, Rain Erosion Resistant For Exterior Aircraft And Missile Plastic Parts
Aerospace Current
2001-03-09
J2183_200103 60 V And 600 V Single Core Cables
Automotive Historical
2001-03-07
J2501_200103 Round, Unscreened, 60 V And 600 V Multicore Sheathed Cables
Automotive Historical
2001-03-07
J1036_200103 Dimensional Standard For Cylindrical Hydraulic Couplers For Agricultural Tractors
Commercial Current
2001-03-02
J1097_200103 Hydraulic Excavator Lift Capacity Calculation And Test Procedure
Automotive Historical
2001-03-02
J1193_200103 Nomenclature And Dimensions For Hydraulic Excavators
Commercial Current
2001-03-02
AMS2372C QUALITY ASSURANCE SAMPLING AND TESTING Carbon And Low-Alloy Steel Forgings
Aerospace Historical
2001-03-01
AS21902A UNION, FLARELESS TUBE
Aerospace Historical
2001-03-01
AS28772 PACKING, PREFORMED, (“D RING, SHOCK STRUT)
Aerospace Historical
2001-03-01
AS9724A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .250-28 UNJF-3A
Aerospace Historical
2001-03-01
AS29512 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, TUBE FITTING, “O” RING
Aerospace Historical
2001-03-01
AS81819 Bearings, Plain, (Self-Aligning, Sleeve And Thrust) Self-Lubricating, High Speed Oscillation General Specification For
Aerospace Historical
2001-03-01
AS21900A ADAPTER, FLARELESS TUBE TO A FLARED TUBE
Aerospace Historical
2001-03-01
AIR1899A Aerospace Military Aircraft Hydraulic System Characteristics
Aerospace Current
2001-03-01
AS39029/29 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-C-5015 SERIES MS3450 AND MIL-C-83723 SERIES 2 CONNECTORS)
Aerospace Historical
2001-03-01
AS21907A ELBOW, BULKHEAD UNIVERSAL, 45°, FLARELESS TUBE
Aerospace Historical
2001-03-01
AS21908A ELBOW, BULKHEAD UNIVERSAL 90°, FLARELESS TUBE
Aerospace Historical
2001-03-01
AS39029/107 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-C-38999 SERIES I, III AND IV AND MIL-C-29600 SERIES A CONNECTORS)
Aerospace Historical
2001-03-01
AS28778 PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS
Aerospace Historical
2001-03-01
ARP5448 Plain Bearing Test Methods
Aerospace Historical
2001-03-01
ARP743B Procedure For The Determination Of Particulate Contamination Of Air In Dust Controlled Spaces By The Manual Particle Count Method
Aerospace Historical
2001-03-01
AS39029/69 CONNECTOR CONTACT, ELECTRICAL SOCKET, CRIMP REMOVABLE, FOR MIL-C-85028(AS) CONNECTORS
Aerospace Historical
2001-03-01
AS39029/7 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/8 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/47 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-81511 SERIES 1 AND 2 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/46 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-81511 SERIES 2 CONNECTORS)
Aerospace Historical
2001-03-01
AS26805 Compressor Units, Air/Gas, General Requirements For
Aerospace Historical
2001-03-01
AS39029/3 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-81659 SERIES 1 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/25 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 1 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/26 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 1 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/2 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-C-81659 SERIES 1 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/16 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-81511 SERIES 4 CONNECTORS)
Aerospace Historical
2001-03-01
AIR5396 Characterizations Of Aircraft Icing Conditions
Aerospace Historical
2001-03-01
AS21904A ELBOW, FLARELESS TUBE, 90°
Aerospace Historical
2001-03-01
AS21913A PLUG, FLARELESS TUBE
Aerospace Historical
2001-03-01
AS21915A ADAPTER, STRAIGHT, TUBE TO BOSS
Aerospace Historical
2001-03-01
AS39029/106 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-38999 SERIES I, III AND IV AND MIL-C-29600 SERIES A CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/10 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE, (FOR MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, MIL-C-83723 SERIES 3, AND MIL-C-83733 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/18 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-C-81511 SERIES 3 AND 4 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/9 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE, (FOR MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, MIL-C-83723 SERIES 3, AND MIL-C-83733 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/32 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-26482 SERIES 1, MIL-C-26500 AND MIL-C-26518 CONNECTORS)
Aerospace Historical
2001-03-01
AS21911A TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON RUN
Aerospace Historical
2001-03-01
AS21910A TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON SIDE
Aerospace Historical
2001-03-01
AS21906A CROSS, FLARELESS TUBE
Aerospace Historical
2001-03-01
AS21909A TEE, BULKHEAD AND UNIVERSAL, FLARELESS TUBE
Aerospace Historical
2001-03-01
AS21925A ELBOW, 90° UNIVERSAL, FLARELESS TUBE, HIGH PROFILE
Aerospace Historical
2001-03-01
AS21914A CAP, PRESSURE SEAL, FLARELESS TUBE FITTING
Aerospace Historical
2001-03-01
AS21912A TEE, FLARELESS TUBE WITH BULKHEAD ON RUN
Aerospace Historical
2001-03-01
AS39029/30 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-5015 MS3450 SERIES AND MIL-C-83723 SERIES II CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/4 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, MIL-C-83723 SERIES I AND III, AND MIL-C-83733 CONNECTORS)
Aerospace Historical
2001-03-01
AS150C Hose Assembly, Type Classifications Of, Basic Performance And Fire Resistance
Aerospace Historical
2001-03-01
AS39029/5 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, MIL-C-83723 SERIES I AND III, AND MIL-C-83733 CONNECTORS AND MIL-S-12883/40 AND /41 RELAY SOCKETS)
Aerospace Historical
2001-03-01
AS39029/70 CONNECTOR CONTACT, ELECTRICAL PIN, CRIMP REMOVABLE, FOR MIL-C-85028(AS) CONNECTORS
Aerospace Historical
2001-03-01
AS39029/90 CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8
Aerospace Historical
2001-03-01
AS39029/91 CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SHIELDED, SIZE 8
Aerospace Historical
2001-03-01
AS39029/11 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-C-81659 SERIES 2 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/12 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-81659 SERIES 2 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/1 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-T-81714 TERMINAL JUNCTION SYSTEM)
Aerospace Historical
2001-03-01
AS39029/31 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-C-26482 SERIES 1, MIL-C-26500 AND MIL-C-26518 CONNECTORS)
Aerospace Historical
2001-03-01
AS5458 HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO STRAIGHT
Aerospace Historical
2001-03-01
AS27197 SEAL, PLAIN, RUBBER, (HOT AIR RESISTANT 400°F), MOLD IN GROOVE
Aerospace Historical
2001-03-01
AS27198 SEAL, PLAIN, RUBBER, (-65 TO +350°F FUEL RESISTANT), MOLD IN GROOVE
Aerospace Historical
2001-03-01
AS27196 GASKET, RUBBER, FLUID RESISTANT, OILS, SYNTHETIC OILS AND FUELS, (-65 TO +400°F), MOLD IN GROOVE
Aerospace Historical
2001-03-01
ARP5448/9 Plain Bearing Lined Inside Diameter Plug Gaging
Aerospace Historical
2001-03-01
AS5463 HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARED, WELDED, 90° TO 90°
Aerospace Historical
2001-03-01
AS5459 HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 45°
Aerospace Historical
2001-03-01
AS5460 HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 90°
Aerospace Historical
2001-03-01
AS5461 HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARED, WELDED, 45° TO 45°
Aerospace Historical
2001-03-01
AS5462 HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARED, WELDED, 45° TO 90°
Aerospace Historical
2001-03-01
AMS5685K Steel, Corrosion Resistant, Safety Wire, 18Cr – 11.5Ni (SAE 30305) Solution Heat Treated, Cold Finished
Aerospace Historical
2001-03-01
J2535_200103 Setting Preload In Heavy-Duty Wheel Bearings
Automotive Historical
2001-03-01
J2075_200103 Alternator Remanufacturing/Rebuilding Procedures Includes Passenger Car, Heavy Duty, Industrial, Agricultural, And Marine
Automotive Historical
2001-03-01
AMS6449D Steel, Bars, Forgings, And Tubing 1.0Cr (0.98 – 1.10C) (SAE 51100) For Bearing Applications
Aerospace Historical
2001-03-01
MAM2242B Tolerances, Metric Corrosion And Heat Resistant Steel, Iron Alloy, Titanium, And Titanium Alloy Sheet, Strip, And Plate
Aerospace Historical
2001-03-01
AMSP83461/2 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 °F (135 °C) FOR USE IN BOSS FITTINGS, SIZES AND TOLERANCES
Aerospace Historical
2001-03-01
AMS1531C Cleaner For Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
Aerospace Historical
2001-03-01
AMS1532C Cleaner For Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Emulsion-Type
Aerospace Historical
2001-03-01
AMS1528C Cleaner For Aircraft Exterior Surfaces Emulsion, Pressure-Spray Type
Aerospace Historical
2001-03-01
AMS1529C Cleaner For Aircraft Exterior Surfaces Emulsion, Foam-On, Pressure-Spray Type
Aerospace Historical
2001-03-01
AMS5405A Alloy Castings, Investment, Corrosion And Heat Resistant 64Ni – 8.0Cr – 10Co – 6.0Mo – 1.0Ti – 4.2Ta – 6.0Al – 0.015B – 0.08Zr Vacuum Melted, Vacuum Cast As Cast
Aerospace Historical
2001-03-01
AMS5408A Alloy Castings, Centrifugal, Corrosion And Heat Resistant 64Ni – 16Cr – 15Mo – 0.30Al – 0.05La Solution Heat Treated
Aerospace Historical
2001-03-01
AMS5407A Alloy Castings, Investment, Corrosion And Heat Resistant 60Ni – 9.0Cr – 10Co – 12.5W – 1.0Cb – 2.0Ti – 5.0Al – 0.015B – 0.06Zr Vacuum Melted, Vacuum Cast As Cast
Aerospace Historical
2001-03-01
AMS5406A Alloy Castings, Investment, Corrosion And Heat Resistant 63Ni – 8.0Cr – 10Co – 6.0Mo – 1.0Ti – 4.2Ta – 6.0Al – 0.015B – 0.03Zr – 1.2Hf Vacuum Melted, Vacuum Cast As Cast
Aerospace Historical
2001-03-01
AMSR83485/1 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES, O-RINGS, SIZES AND TOLERANCES
Aerospace Historical
2001-03-01
AMS6312F Steel Bars, Forgings, And Tubing 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4640)
Aerospace Historical
2001-03-01
AMS6281H Steel, Mechanical Tubing 0.50Cr – 0.55Ni – 0.20Mo (0.28 – 0.33C) (SAE 8630)
Aerospace Historical
2001-03-01
AMS6357H Steel Sheet, Strip, And Plate 0.50Cr – 0.55Ni – 0.25Mo (0.33 – 0.38C) (SAE 8735)
Aerospace Historical
2001-03-01
AMS4201D Aluminum Alloy Plate 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
2001-03-01
AMS6413J Steel, Mechanical Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.35 – 0.40C) (SAE 4337)
Aerospace Historical
2001-03-01
AIR810C Degradation Limits Of Hydrocarbon-Based Hydraulic Fluids, MIL-H-5606, MIL-H-6083, MIL-H-83282, And MIL-H-46170 Used In Hydraulic Test Stands
Aerospace Historical
2001-03-01
AS35769 GASKET, METALLIC, ENCASED, ANNULAR, COPPER
Aerospace Historical
2001-03-01
AS568B Aerospace Size Standard For O-Rings
Aerospace Historical
2001-03-01
USCAR14 Standard For Testing Automotive Halogen Light Sources
Automotive Historical
2001-03-01
AS29561 PACKING, PREFORMED, “O” RING, SYNTHETIC LUBRICANT RESISTANT
Aerospace Historical
2001-03-01
AS29513 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, “O” RING
Aerospace Historical
2001-03-01
AS39029/44 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-5015 SERIES MS3400 CONNECTORS)
Aerospace Historical
2001-03-01
AS39029/45 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-5015 SERIES MS3400 CONNECTORS)
Aerospace Historical
2001-03-01
AS21916A REDUCER, EXTERNAL THREAD, FLARELESS TUBE
Aerospace Historical
2001-03-01
AS21924A UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL
Aerospace Historical
2001-03-01
AS27194 SEAL, PLAIN, RUBBER, (-65 TO +160°F FUEL RESISTANT), MOLD IN GROOVE
Aerospace Historical
2001-03-01
AMS2242F Tolerances Corrosion And Heat Resistant Steel, Iron Alloy, Titanium, And Titanium Alloy Sheet, Strip, And Plate
Aerospace Historical
2001-03-01
AS21905A TEE, FLARELESS TUBE
Aerospace Historical
2001-03-01
AS27195 SEAL, PLAIN, RUBBER, SYNTHETIC OIL RESISTANT, (-65 TO +275°F), MOLD IN GROOVE
Aerospace Historical
2001-03-01
J1832_200102 Low Pressure Gasoline Fuel Injector
Automotive Historical
2001-02-26
J1561_200102 Laboratory Speed Test Procedure For Passenger Car Tires
Automotive Historical
2001-02-26
J694_200102 Disc Wheel/Hub Or Drum Interface Dimensions–Commercial Vehicles
Commercial Historical
2001-02-22
J1392_200102 Steel, High Strength, Hot Rolled Sheet And Strip, Cold Rolled Sheet, And Coated Sheet
Automotive Historical
2001-02-21
ARINC753-3 HF DATA LINK SYSTEM
Aerospace Current
2001-02-16
AMS6438E Steel, Sheet, Strip, And Plate 1.05Cr – 0.55Ni – 1.0Mo – 0.12V (0.45 – 0.50C) Consumable Electrode Vacuum Melted
Aerospace Historical
2001-02-15
AMS5732F STEEL BARS, WIRE, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Consumable Electrode Melted 1800°F (982°C) Solution And Precipitation Heat Treated
Aerospace Historical
2001-02-15
J961_200102 Marine Control Cable Connection–Engine Throttle Lever
Commercial Historical
2001-02-14
J960_200102 Marine Control Cable Connection–Engine Clutch Lever
Automotive Historical
2001-02-14
J1100_200102 Motor Vehicle Dimensions
Automotive Historical
2001-02-14
AMS3331A Fluorosilicone (FVMQ) Rubber Fuel And Oil Resistant 65 – 75
Aerospace Historical
2001-02-01
AMS3330A Fluorosilicone (FVMQ) Rubber Fuel And Oil Resistant 45 – 55
Aerospace Historical
2001-02-01
J2069_200102 Recovery Attachment Points For Passenger Cars, Vans, And Light Trucks
Automotive Historical
2001-02-01
AMS4008J Aluminum Alloy, Sheet And Plate 1.25Mn – 0.12Cu (3003-H14) Strain Hardened
Aerospace Historical
2001-02-01
AMS4846B Tin Bronze Castings, Sand And Centrifugal 86.5cu 11.2sn 2.0zn As Cast
Aerospace Current
2001-02-01
AMS6277E Steel, Bars, Forgings, And Tubing 0.50Cr – 0.55Ni – 0.20Mo (0.18 – 0.23C) (SAE 8620) Vacuum Arc Or Electroslag Remelted
Aerospace Historical
2001-02-01
AMS4991B Titanium Alloy Castings, Investment 6Al – 4V Hot Isostatic Pressed, Anneal Optional
Aerospace Historical
2001-02-01
AMS3329A Fluorosilicone (FVMQ) Rubber Fuel And Oil Resistant, High Strength 45 – 55
Aerospace Historical
2001-02-01
AMS4942D Titanium Tubing, Seamless Annealed, 40,000 Psi (275 MPa) Yield Strength
Aerospace Historical
2001-02-01
J312_200102 Automotive Gasolines
Automotive Historical
2001-02-01
AMS3253 Ethylene Propylene Rubber Phosphate Ester Resistant 65 – 75
Aerospace Historical
2001-02-01
AMS3095 Paint, Gloss, Airline Exterior System
Aerospace Historical
2001-02-01
AMS2417F Plating, Zinc-Nickel Alloy
Aerospace Historical
2001-02-01
J2094_200101 Vehicle And Control Modifications For Drivers With Physical Disabilities Terminology
Automotive Current
2001-01-29
J516_200101 Hydraulic Hose Fittings
Automotive Historical
2001-01-19
J1231_200101 Formed Tube Ends For Hose Connections And Hose Fittings
Automotive Historical
2001-01-19
ARINC660A CNS/ATM AVIONICS, FUNCTIONAL ALLOCATION AND RECOMMENDED ARCHITECTURES
Aerospace Current
2001-01-15
AMS5335D STEEL CASTINGS, SAND 0.65Cr – 0.75Ni – 0.20Mo (0.25 – 0.33C) (SAE 8630 Modified) Normalized And Tempered
Aerospace Historical
2001-01-13
AMS2486C Conversion Coating Of Titanium Alloys Fluoride-Phosphate Type
Aerospace Historical
2001-01-11
AMS7718E Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, And Forgings 50Ni – 50Fe
Aerospace Historical
2001-01-08
AMS6278B Steel, Bars, Forgings, And Tubing 4.1Cr – 3.4Ni – 4.2Mo – 1.2V (0.11 – 0.15C) Premium Aircraft-Quality For Bearing Applications Double Vacuum Melted
Aerospace Historical
2001-01-08
MS1000_200101 Lubricants, Industrial Oils, And Related Products-Classification
Automotive Historical
2001-01-04
J1600_200101 Method For Evaluating The Adhesion Characteristics Of Automotive Sealers
Automotive Current
2001-01-03
AS1040D FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARED
Aerospace Historical
2001-01-01
AMS3787A Thread, Para-Aramid Intermediate Modulus
Aerospace Historical
2001-01-01
AS516A ADAPTER 10” TO 8” BOLT CIRCLE
Aerospace Current
2001-01-01
AS515A ADAPTER 10” TO 5” BOLT CIRCLE
Aerospace Current
2001-01-01
AS518A DRIVE ACCESSORY 3.000 PILOT DIAMETER – QAD
Aerospace Current
2001-01-01
AS517A ADAPTER 8” TO 5” BOLT CIRCLE
Aerospace Current
2001-01-01
AS468C DRIVE-ACCESSORY, 5” BOLT CIRCLE
Aerospace Current
2001-01-01
AS473C FLANGE-ACCESSORY, 10” BOLT CIRCLE
Aerospace Current
2001-01-01
AS470C DRIVE-ACCESSORY, 10” BOLT CIRCLE
Aerospace Current
2001-01-01
AS472C FLANGE-ACCESSORY, 8” BOLT CIRCLE
Aerospace Current
2001-01-01
AS471C FLANGE-ACCESSORY, 5” BOLT CIRCLE
Aerospace Current
2001-01-01
AS1037E FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARED
Aerospace Historical
2001-01-01
AS9356A NUT, PLAIN, HEXAGON, UNS S66286
Aerospace Historical
2001-01-01
AS1034D FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED
Aerospace Historical
2001-01-01
AS1038D FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED
Aerospace Historical
2001-01-01
AS9112A BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI, .3125-24 UNJF-3A
Aerospace Historical
2001-01-01
AS1032D FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON RUN, FLARED
Aerospace Historical
2001-01-01
AS1036E FITTING, CROSS, STANDARD AND REDUCER, FLARED
Aerospace Historical
2001-01-01
AS1031D FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARED
Aerospace Historical
2001-01-01
AMS3909A Cloth, Aramid Intermediate Modulus
Aerospace Historical
2001-01-01
AMS3571B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled
Aerospace Historical
2001-01-01
AMS3787/6A Thread, Para-Aramid Intermediate Modulus 950 Yards Per Pound (1915 M/Kg), 150 Pounds Force (667 N) Breaking Strength
Aerospace Historical
2001-01-01
AMS3787/7A Thread, Para-Aramid Intermediate Modulus 850 Yards Per Pound (1714 M/Kg), 175 Pounds Force (778 N) Breaking Strength
Aerospace Historical
2001-01-01
AMS3787/1A Thread, Para-Aramid Intermediate Modulus 10,000 Yards Per Pound (20,159 M/Kg), 16 Pounds Force (71 N) Breaking Strength
Aerospace Historical
2001-01-01
AMS3787/2A Thread, Para-Aramid Intermediate Modulus 6700 Yards Per Pound (13,507 M/Kg), 25 Pounds Force (111 N) Breaking Strength
Aerospace Historical
2001-01-01
AMS3787/3A Thread, Para-Aramid Intermediate Modulus 5000 Yards Per Pound (10,080 M/Kg), 35 Pounds Force (156 N) Breaking Strength
Aerospace Historical
2001-01-01
AMS3571/1B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 45 Durometer “A”
Aerospace Historical
2001-01-01
AMS3571/4B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer “A”
Aerospace Historical
2001-01-01
AMS3571/5B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 85 Durometer “A”
Aerospace Historical
2001-01-01
AMS3571/2B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer “A”
Aerospace Historical
2001-01-01
AMS3571/3B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer “A”
Aerospace Historical
2001-01-01
AMS3571/8B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer “D”
Aerospace Historical
2001-01-01
AMS3571/9B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer “D”
Aerospace Historical
2001-01-01
AMS3571/6B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 95 Durometer “A”
Aerospace Historical
2001-01-01
AMS3571/7B Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer “D”
Aerospace Historical
2001-01-01
AMS3373/1A Compound, Silicone Rubber, Insulating And Sealing Oil And Reversion Resistant, Low Viscosity, Room Temperature Cure
Aerospace Historical
2001-01-01
AMS3373/2A Compound, Silicone Rubber, Insulating And Sealing Oil And Reversion Resistant, Medium Viscosity, Room Temperature Cure
Aerospace Historical
2001-01-01
AMS3373B Compound, Silicone Rubber, Insulating And Sealing 35 To 55
Aerospace Historical
2001-01-01
AMS5024G Steel, Bars, Forgings, And Tubing, Free-Cutting 1.5Mn (0.32 – 0.39C) (SAE 1137)
Aerospace Historical
2001-01-01
AMS3801/5A Cloth, Parachute, Meta-Aramid, Low Modulus 18.0(610) Weight, Basket Weave, Resin Treated
Aerospace Historical
2001-01-01
AMS3787/4A Thread, Para-Aramid Intermediate Modulus 3350 Yards Per Pound (6753 M/Kg), 50 Pounds Force (222 N) Breaking Strength
Aerospace Historical
2001-01-01
AMS3787/5A Thread, Para-Aramid Intermediate Modulus 2000 Yards Per Pound (4032 M/Kg), 80 Pounds Force (356 N) Breaking Strength
Aerospace Historical
2001-01-01
AMS3787/8A Thread, Para-Aramid Intermediate Modulus 500 Yards Per Pound (1008 M/Kg), 225 Pounds Force (1001 N) Breaking Strength
Aerospace Historical
2001-01-01
AMS3801/2A Cloth, Parachute, Meta-Aramid, Low Modulus 6.5(220) Weight, Special Weave
Aerospace Historical
2001-01-01
AMS3801/3A Cloth, Parachute, Meta-Aramid, Low Modulus 12.0(407) Weight, Special Weave
Aerospace Historical
2001-01-01
AMS2629B Fluid, Jet Reference
Aerospace Historical
2001-01-01
AMS3801/4A Cloth, Parachute, Meta-Aramid, Low Modulus 7.0(237) Weight, Plain Weave
Aerospace Historical
2001-01-01
AMS5022M Steel, Bars, Forgings, And Tubing, Free-Cutting 0.14 – 0.20C (SAE 1117)
Aerospace Historical
2001-01-01
AS1039D FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED
Aerospace Historical
2001-01-01
AMS6351F Steel, Sheet, Strip, And Plate 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) Spheroidized
Aerospace Historical
2001-01-01
AMS5901A Steel, Corrosion Resistant, Sheet, Strip, And Plate 18Cr – 8Ni (SAE 30301) Solution Heat Treated
Aerospace Historical
2001-01-01
J200_200101 Classification System For Rubber Materials
Automotive Historical
2001-01-01
AMS3819B Cloths, Cleaning For Aircraft Primary And Secondary Structural Surfaces
Aerospace Historical
2001-01-01
AS1033D FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED
Aerospace Historical
2001-01-01
AS39029 Contacts, Electrical Connector, General Specification For
Aerospace Historical
2001-01-01
AMS2745 Induction Hardening Of Steel Parts
Aerospace Historical
2001-01-01
AMS5362J Steel, Corrosion And Heat Resistant, Investment Castings 19Cr – 12Ni – 1.0(Cb + Ta) Solution Heat Treated
Aerospace Historical
2001-01-01
AMS3644E Polyimide, Molded Rod, Bar, And Tube, Plaque, And Formed Parts
Aerospace Historical
2001-01-01
AMS6373F Steel, Welded Tubing 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130)
Aerospace Historical
2000-12-15
AMS6422G Steel, Bars, Forgings, And Tubing 0.80Cr – 0.85Ni – 0.20Mo – 0.003B – 0.04V (0.38 – 0.43C) (Modified 98BV40)
Aerospace Historical
2000-12-15
AMS6421D Steel, Bars, Forgings, And Tubing 0.80Cr – 0.85Ni – 0.20Mo – 0.003B (0.35 – 0.40C) (Modified 98B37)
Aerospace Historical
2000-12-15
AMS6370L Steel, Bars, Forgings, And Rings 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130)
Aerospace Historical
2000-12-14
J1223_200012 Marine Carburetors And Fuel Injection Throttle Bodies
Automotive Historical
2000-12-08
J33_200012 Snowmobile Definitions And Nomenclature–General
Commercial Historical
2000-12-08
J171_200012 Measurement Of Fuel Evaporative Emissions From Gasoline Powered Passenger Carsand Light Trucks Using The Enclosure Technique
Automotive Current
2000-12-07
J431_200012 Automotive Gray Iron Castings
Automotive Historical
2000-12-06
AMS2820B Packaging, Aerosol
Aerospace Current
2000-12-04
AMS5635E Steel, Corrosion-Resistant, Bars, Wire, And Forgings 18Cr – 9Ni – 0.21Pb (303Pb) Free-Machining, Solution Heat Treated
Aerospace Historical
2000-12-04
J703_200012 Fuel Systems–Truck And Truck Tractors
Commercial Historical
2000-12-01
AMS5880B Steel, Corrosion Resistant, Bars, Forgings, And Wire 17Cr – 0.52Mo (0.95 – 1.20C) (SAE 51440C) For Bearing Applications
Aerospace Historical
2000-12-01
ARP1786A Wheel Roll On Rim Criteria For Aircraft Application
Aerospace Historical
2000-12-01
AIR81B Hydrocarbon-Based Hydraulic Fluid Properties
Aerospace Historical
2000-12-01
AS5491 Calculation Of Electron Vacancy Number In Superalloys
Aerospace Historical
2000-12-01
J18_200012 Sponge And Expanded Cellular Rubber Products
Automotive Historical
2000-12-01
J2564_200012 Automotive Stability Enhancement Systems
Automotive Historical
2000-12-01
MAM2410A Plating, Silver, Nickel Strike, High Bake
Aerospace Current
2000-12-01
AMS3076C Compound, Corrosion, Preventive, Hard Film, Cold Application
Aerospace Current
2000-12-01
AMS3564E Vulcanized Fiber Sheet
Aerospace Historical
2000-12-01
AMS5352D Steel, Corrosion Resistant, Investment Castings 17Cr – 0.55Mo (0.95 – 1.20C) Annealed
Aerospace Historical
2000-12-01
AMS5349C Steel, Corrosion Resistant, Investment Castings 13Cr Free Machining; Hardened And Tempered
Aerospace Historical
2000-12-01
AMS4211A Aluminum Alloy, Plate 6.2Zn – 1.9Cu – 2.1Mg – 0.10Zr (7040-T7451) Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
2000-12-01
AMS3690B Adhesive Compound, Epoxy Room Temperature Curing
Aerospace Historical
2000-12-01
AMS5591J Steel, Corrosion And Heat Resistant, Tubing, Seamless 12.5Cr (SAE 51410) Annealed
Aerospace Historical
2000-12-01
AMS3670/4C Polyamide-Imide Bar, Rod, And Shapes 30% Glass Fiber
Aerospace Historical
2000-12-01
AMS3670/5C Polyamide-Imide Bar, Rod, And Shapes 30% Carbon Fiber
Aerospace Historical
2000-12-01
AMS5353C Steel, Corrosion Resistant, Investment Castings 16Cr – 1.8Ni – 0.08N As Cast
Aerospace Historical
2000-12-01
AMS5860E Steel, Corrosion Resistant, Sheet, Strip, And Plate 12Cr – 8.5Ni – 0.30Cb – 1.1Ti – 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-12-01
AMS5580J Nickel Alloy, Corrosion And Heat Resistant, Seamless Tubing 74Ni – 15.5Cr – 8.0Fe Annealed
Aerospace Historical
2000-12-01
J901_200012 Universal Joints And Driveshafts–Nomenclature–Terminology–Application
Automotive Historical
2000-12-01
AMS6350J Steel Sheet, Strip, And Plate 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130)
Aerospace Historical
2000-12-01
J1460/1_200011 Human Mechanical Impact Response Characteristics–Dynamic Response Of The Human Abdomen
Automotive Historical
2000-11-28
J527_200011 Brazed Double Wall Low-Carbon Steel Tubing
Automotive Historical
2000-11-28
AMS5731K Steel, Corrosion And Heat-Resistant, Bars, Wire, Forgings, Tubing, And Rings 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Consumable Electrode Melted, 1800 °F (982 °C) Solution Heat Treated
Aerospace Historical
2000-11-20
AMS5734J Steel, Corrosion And Heat-Resistant, Bars, Wire, Forgings, And Tubing 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Consumable Electrode Melted, 1650 °F (899 °C) Solution Heat Treated
Aerospace Historical
2000-11-20
AMS5737N Steel, Corrosion And Heat-Resistant, Bars, Wire, Forgings, And Tubing 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Consumable Electrode Melted 1650 °F (899 °C) Solution And Precipitation Heat Treated
Aerospace Historical
2000-11-20
J2289_200011 Electric Drive Battery Pack System Functional Guidelines
Automotive Historical
2000-11-15
J1081_200011 Potential Standard Steels
Automotive Current
2000-11-10
J966_200011 Test Procedure For Measuring Passenger Car Tire Revolutions Per Mile
Automotive Historical
2000-11-09
AMS5649F Steel, Corrosion And Heat-Resistant, Bars, Wire, And Forgings 18Cr – 13Ni – 2.1Mo Free Machining Solution Heat Treated
Aerospace Historical
2000-11-09
J1954_200011 Guide To The Application And Use Of Passenger Car Air-Conditioning Compressor Face Seals
Automotive Historical
2000-11-07
J780_200011 Engine Coolant Pump Seals
Automotive Historical
2000-11-07
J1245_200011 Guide To The Application And Use Of Engine Coolant Pump Face Seals
Automotive Historical
2000-11-07
J500_200011 Serrated Shaft Ends
Automotive Current
2000-11-06
J1807_200011 Hydraulic Power Assist Brake Booster Test Procedure
Automotive Historical
2000-11-03
J915_200011 Automatic Transmissions–Manual Control Sequence
Automotive Historical
2000-11-02
J1540_200011 Manual Transmission Efficiency And Parasitic Loss Measurement
Commercial Historical
2000-11-02
J648_200011 Automatic Transmission Hydraulic Control Systems–Terminology
Automotive Historical
2000-11-02
MAM2300A PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2000-11-02
AMS5907A Steel, Corrosion And Heat Resistant, Sheet, Strip, And Plate 17Cr – 12Ni – 2.5Mo (SAE 30316) Cold Rolled, 1/4 Hard, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-11-01
AS1624 HOSE, POLYTETRAFLUOROETHYLENE (TFE), LIGHTWEIGHT 3,000 PSI, HIGH TEMPERATURE, HYDRAULIC AND PNEUMATIC
Aerospace Historical
2000-11-01
AS1722 HOSE, POLYTETRAFLUOROETHYLENE (TFE), LIGHT-WEIGHT HIGH TEMPERATURE AND HIGH PRESSURE (3000 PSIG) WITH INTEGRAL FIRE PROTECTION
Aerospace Historical
2000-11-01
AIR5468 Ultraviolet (UV) Lasers For Aerospace Wire Marking
Aerospace Historical
2000-11-01
ARP24C Determination Of Hydraulic Pressure Drop
Aerospace Historical
2000-11-01
ARP4852B Design Specification For Towbarless Push-Back Tow Vehicles
Aerospace Historical
2000-11-01
ARP1192C Procedure For Calibration And Verification Of A Liquidborne Particle Counter: An Absolute Standard
Aerospace Current
2000-11-01
ARP1321A Flexure Testing Of Bent Hydraulic Tubing
Aerospace Current
2000-11-01
AS5994 Pump Units, Hydraulic, Electric Motor Driven, Variable Delivery
Aerospace Historical
2000-11-01
AS25959 Tie Downs, Cargo, Aircraft
Aerospace Historical
2000-11-01
AS27260 Tie Down, Cargo, Aircraft, CGU-1/B
Aerospace Historical
2000-11-01
AS27444 Net, Cargo Tiedown, Pallets, HCU-7/E, HCU-15/C, HCU-11/C, And HCU-16/C
Aerospace Historical
2000-11-01
AS26780 Tie Down, Cargo, Aircraft, Nylon Web Net
Aerospace Historical
2000-11-01
AS4689A FITTING, TEE, REDUCER, BULKHEAD ON RUN, FLARELESS AND SHORT FLARELESS
Aerospace Historical
2000-11-01
AS4690A FITTING, TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS AND SHORT FLARELESS
Aerospace Historical
2000-11-01
AS4686A FITTING, ELBOW, 90°, REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS
Aerospace Historical
2000-11-01
ARP4853B Design Specification For Towbarless Tow Vehicles
Aerospace Historical
2000-11-01
AS4683A FITTING ELBOW, 45°, REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS
Aerospace Historical
2000-11-01
J2555_200011 Vehicle Idle Gear Rattle Evaluation Procedure
Automotive Historical
2000-11-01
J1726_200011 Air-To-Air Charge Air Cooler (CAC) Internal Cleanliness
Automotive Historical
2000-11-01
AMS7734C Nickel-Iron Alloy Wire, Copper Clad, Round 42Ni – 56.5Fe Annealed Dumet
Aerospace Historical
2000-11-01
MAM4248A ALUMINUM ALLOY HAND FORGINGS AND ROLLED RINGS 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T652) Solution Heat Treated, Stress Relieved By Compression, And Precipitation Heat Treated
Aerospace Historical
2000-11-01
AS8592-4 AS8592 Pipe Couplings (Steel) Union Adaptor/Unified Attachment End 3/16″ To 1/2″ For Use With ‘O’ Ring Gaskets In American (And 10050) Or Equiv. A.G.S. 3018 Tapped Bosses
Aerospace Current
2000-11-01
AS8591-4 AS8591 Pipe Couplings (Steel) Cone Union Adaptor Unified Attachment End 3/16″ To 1/2″ For Use With ‘O’ Ring Gaskets In American (And 10050) Or Equivalent A.G.S. 3018 Tapped Bosses
Aerospace Current
2000-11-01
AMS5718B Steel, Bars, Forgings, Tubing, And Rings, Corrosion Resistant 11.8Cr – 2.5Ni – 1.8Mo – 0.33V (0.08 – 0.15C) Annealed
Aerospace Historical
2000-11-01
AMS5762D STEEL BARS, WIRE, AND FORGINGS, CORROSION RESISTANT 5.8Mn – 17Cr – 5.8Ni – 2.0Cu – 0.26S Free Machining, Solution Heat Treated
Aerospace Historical
2000-11-01
AMS5710E Steel, Bars And Forgings, Corrosion And Heat Resistant 20Cr – 2.2Si – 1.3Ni (0.76 – 0.86C)
Aerospace Historical
2000-11-01
AMS5705D Steel, Corrosion And Heat Resistant, Bars And Forgings 2.5Si – 12.8Cr – 8.0Ni Annealed
Aerospace Historical
2000-11-01
AMS5739D Steel, Corrosion And Moderate Heat Resistant, Bars, Forgings, And Rings 14.5Cr – 6.5Ni – 0.72Ti Solution Heat Treated And Maraged, 180,000 Psi (1240 MPa) Tensile Strength
Aerospace Historical
2000-11-01
AMS5740D Steel, Corrosion And Moderate Heat Resistant, Bars, Forgings, And Rings 14.5Cr – 6.5Ni – 0.72Ti Solution Heat Treated And Maraged, 155,000 Psi (1070 MPa) Tensile Strength
Aerospace Historical
2000-11-01
AMS5579C Steel, Corrosion And Heat Resistant, Tubing Welded 19.5Cr – 9.5Ni – 1.4Mo – 1.4W – 0.42(Cb + Ta) – 0.22Ti Thin Wall
Aerospace Historical
2000-11-01
AMS5369D Steel Castings, Sand, Corrosion And Heat Resistant 19.5Cr – 9.5Ni – 1.4Mo – 1.4W – 0.50 (Cb+Ta) – 0.32Ti Solution And Precipitation Heat Treated
Aerospace Historical
2000-11-01
AMS5371D Steel Castings, Sand, Corrosion And Heat Resistant 19.5Cr – 9.5Ni (Low Carbon) (304L) Solution Heat Treated
Aerospace Historical
2000-11-01
AMS5372C Steel Castings, Sand, Corrosion Resistant 16Cr – 1.9Ni (Type 431 Mod) Normalized And Tempered
Aerospace Historical
2000-11-01
AMS5359D Steel Castings, Sand, Corrosion And Heat Resistant 15Cr – 4.0Ni – 2.3Mo – 0.08N Solution Heat Treated
Aerospace Historical
2000-11-01
AMS5394C Alloy Iron Castings, Ductile, Sand, Corrosion And Heat Resistant 2.0Cr – 20Ni (2.4 – 3.0C) Stress Relieved
Aerospace Historical
2000-11-01
AMS5392L Alloy Iron Castings, Sand, Moderate Corrosion And Heat Resistant 2.1Cr – 15Ni – 6.5Cu (2.4 – 2.8C) As Cast
Aerospace Historical
2000-11-01
AMS5393F Alloy Iron Castings, Sand Moderate Corrosion And Heat Resistant 2.0Cr – 20Ni (2.4 – 2.8C) Stress Relieved
Aerospace Historical
2000-11-01
AMS4815F Bearings, Silver Plated Steel Back
Aerospace Historical
2000-11-01
AMS5850C Steel, Corrosion And Heat Resistant, Honeycomb Core Resistance Welded, Square Cell
Aerospace Historical
2000-11-01
AMS5868A Steel, Corrosion Resistant, Seamless And Welded Aircraft Tubing 19Cr – 9.5Ni (SAE 30304) Cold Drawn, 1/2 Hard Temper
Aerospace Historical
2000-11-01
AMS5897A Steel, Corrosion And Heat Resistant, Seamless Or Welded Hydraulic Tubing 18.5Cr – 11Ni – 0.80Cb (SAE 30347) Solution Heat Treated And Cold Drawn, 1/8 Hard Temper
Aerospace Historical
2000-11-01
AMS5895C Steel, Corrosion And Heat Resistant, Bars, Wire, Forgings, Tubing, And Rings 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Consumable Electrode Melted, 1750 °F (954 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable
Aerospace Historical
2000-11-01
AMS5618F Steel, Corrosion Resistant, Bars, Wire, And Forgings 17Cr – 0.52Mo (0.95 – 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted
Aerospace Historical
2000-11-01
AMS5773D Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing, And Rings 15Cr – 6.5Ni – 0.75Mo – 0.30 (Cb + Ta) – 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable
Aerospace Historical
2000-11-01
AMS5910A Steel, Corrosion Resistant, Sheet, Strip, And Plate 19Cr – 9.2Ni (SAE 30304) Cold Rolled, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-11-01
AS5502 Standard Requirements For Aerospace Sealants
Aerospace Historical
2000-11-01
AMS5780D Steel, Corrosion And Heat Resistant, Welding Wire 15.5Cr – 4.5Ni – 2.9Mo – 0.10N
Aerospace Historical
2000-11-01
AMS5746E Alloy Bars And Forgings, Corrosion And Heat Resistant 15Cr – 45Ni – 4.1Mo – 4.1W – 3.0Ti – 1.0Al – 31Fe Consumable Electrode Vacuum Melted Solution And Precipitation Heat Treated
Aerospace Historical
2000-11-01
AMS5688K Steel, Corrosion Resistant, Wire 18Cr – 9.0Ni (SAE 30302) Spring Temper
Aerospace Historical
2000-11-01
AMS5857A Steel, Corrosion Resistant, Bars And Wire 19Cr – 10Ni (SAE 30304) High Yield Strength Solution Heat Treated And Cold Worked
Aerospace Historical
2000-11-01
AMS5906A Steel, Corrosion Resistant, Sheet And Strip 18Cr – 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 Ksi (1276 MPa) Tensile Strength
Aerospace Historical
2000-11-01
J1901_200010 Lip Force Measurement–Radial Lip Seals
Automotive Historical
2000-10-09
J1947_200010 O.D. Coatings For Radial Lip-Type Shaft Seals
Automotive Historical
2000-10-09
J1900_200010 Seals–Bond Test Fixture And Procedure
Automotive Historical
2000-10-09
J1002_200010 SealsÑEvaluation Of Elastohydrodynamic
Automotive Historical
2000-10-09
J2292_200010 Combination Pelvic/Upper Torso (Type 2) Operator Restraint Systems For Off-Road Work Machines
Commercial Historical
2000-10-09
JA1010_200010 Maintainability Program Standard
Aerospace Historical
2000-10-07
J1430_200010 Retardation Capability Of Off-Highway Dumpers And Scrapers
Commercial Current
2000-10-03
J1971_200010 Radial Lip Seal Torque–Measurement Method And Results
Automotive Historical
2000-10-02
AMS2303D Cleanliness, Aircraft Quality Steel Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure
Aerospace Historical
2000-10-01
AMS5880A STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS 17Cr – 0.52Mo (0.95 – 1.20C) (SAE 51440C) For Bearing Applications
Aerospace Historical
2000-10-01
MA2035A PLUG, FLARELESS TUBE, METRIC
Aerospace Historical
2000-10-01
MA2058A UNION, REDUCER/EXPANDER BULKHEAD, FLARELESS TUBE, METRIC
Aerospace Historical
2000-10-01
MA2076 FITTING END, ACORN, SHORT FLARELESS, DESIGN STANDARD, METRIC
Aerospace Historical
2000-10-01
MA2025A UNION, FLARELESS TUBE, METRIC
Aerospace Historical
2000-10-01
MA2038A UNION, REDUCER, FLARELESS TUBE, METRIC
Aerospace Historical
2000-10-01
MA2041A SLEEVE, COUPLING, FLARELESS, METRIC
Aerospace Historical
2000-10-01
MA2043A UNION, BULKHEAD, FLARELESS TUBE, METRIC
Aerospace Historical
2000-10-01
AS9881 NUT, PLAIN HEXAGON – AMS 6322, CADMIUM PLATE MIL-S-8879
Aerospace Historical
2000-10-01
AIR4012A Military Service Experience – Aircraft Wheels
Aerospace Historical
2000-10-01
AIR1358A Aerospace Information Report For Continuous Flow Oxygen Hose Disconnect Fittings
Aerospace Historical
2000-10-01
ARP1932A Anodize Treatment Of Titanium And Titanium Alloys PH 12.4 Maximum
Aerospace Current
2000-10-01
ARP1925A Automated Brush Deburring
Aerospace Historical
2000-10-01
ARP1201B Hexagon Bar, Machined Flat And Forged Wrenching Flat Sizes For Fluid Fittings
Aerospace Historical
2000-10-01
ARP1313B Determination Of Trace Elements In High Temperature Alloys
Aerospace Historical
2000-10-01
AS4149A Clamp Loop Cushion Integral Lock
Aerospace Current
2000-10-01
AS4300 CAP ASSEMBLY, PROTECTIVE CLOSURE, FLARELESS FITTING, LOW PRESSURE
Aerospace Historical
2000-10-01
ARP1360 Detection Of Chloride And Bromide Contamination Of Electronic Equipment
Aerospace Historical
2000-10-01
AS651A HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 45° TO 90°
Aerospace Historical
2000-10-01
AS650A HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 45° TO 45°
Aerospace Historical
2000-10-01
AS652A HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 90° TO 90°
Aerospace Historical
2000-10-01
AS649A HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO 90°
Aerospace Historical
2000-10-01
AS647A HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO STRAIGHT
Aerospace Historical
2000-10-01
AS648A HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO 45°
Aerospace Historical
2000-10-01
AS4130 ELBOW, 45°, BULKHEAD, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS1010D ELBOW, 45°, STANDARD AND REDUCER, FLARELESS TUBE
Aerospace Historical
2000-10-01
AS1009E TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS TUBE
Aerospace Historical
2000-10-01
AS4137 ELBOW, 45°, SWIVEL, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS4136 CROSS, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS4138 ELBOW, 90°, SWIVEL, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS4141 CROSS, SWIVEL ON SIDE, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS627B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARED, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS628B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARED, STRAIGHT TO 45°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS629B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARED, STRAIGHT TO 90°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS631B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARED, 45° TO 90°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS630B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARED, 45° TO 45°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS632B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARED, 90° TO 90°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS4131 ELBOW, 90°, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS4132 ELBOW, 90°, BULKHEAD, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS5198A FITTING, TEE, FLARED TO PIPE ON RUN
Aerospace Historical
2000-10-01
AS4133 TEE, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS4134 TEE, BULKHEAD ON RUN, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS4140 TEE, SWIVEL ON SIDE, REDUCED BODY, FLARELESS
Aerospace Historical
2000-10-01
AS9374 GASKET – METAL O-RING, .094 TUBE X .006 WALL, SILVER PLATED
Aerospace Historical
2000-10-01
ARP1785 STANDARD CODES FOR SLEEVING ON PTFE HOSE ASSEMBLIES
Aerospace Historical
2000-10-01
ARP1785A Standard Codes For Sleeving On PTFE Hose Assemblies
Aerospace Historical
2000-10-01
AS5196A FITTING, ELBOW, 45°, FLARED TO PIPE
Aerospace Historical
2000-10-01
AS624B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARELESS, 45° TO 45°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS5197A FITTING, TEE, FLARED TO PIPE ON SIDE
Aerospace Historical
2000-10-01
AS625B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARELESS, 45° TO 90°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS626B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARELESS, 90° TO 90°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
ARP4946 Aerospace – Valves, Check, Hydraulic, Aircraft And Missile
Aerospace Historical
2000-10-01
AS623B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARELESS, STRAIGHT TO 90°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AS622B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARELESS, STRAIGHT TO 45°, HEAVYWEIGHT
Aerospace Historical
2000-10-01
J1873_200010 Moisture Transmission Test Procedure–Hydraulic Brake Hose Assemblies
Automotive Historical
2000-10-01
J2306_200010 Automobile And Light Truck Engine Coolant Concentrate Propylene Glycol Type
Automotive Current
2000-10-01
J1759_200010 SAE Hose Measurement Study
Automotive Historical
2000-10-01
AGS519-4 AGS519 Protective Rubber Caps For Heat Exchange Equipment
Aerospace Current
2000-10-01
J1704_200010 Borate Ester Based Brake Fluids
Automotive Historical
2000-10-01
J1712_200010 Reporting On Emission Testing For In-Use Light-Duty Trucks And Passenger Vehicles
Automotive Historical
2000-10-01
AMS6443F Steel Bars, Forgings, And Tubing 1.0Cr (0.98 – 1.10C) (SAE 51100) Consumable Electrode Vacuum Melted
Aerospace Historical
2000-10-01
AMS6521B Steel Sheet, Strip, And Plate, Maraging 18.5Ni – 9.0Co – 4.9Mo – 0.65Ti – 0.10Al Consumable Electrode Melted, Solution Heat Treated
Aerospace Historical
2000-10-01
MAM2303B Cleanliness, Aircraft Quality Steel Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (SI) Measurement
Aerospace Historical
2000-10-01
MAM2263 TOLERANCES, METRIC Nickel, Nickel Alloy, And Cobalt Alloy Tubing
Aerospace Historical
2000-10-01
MAM6304A LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING 0.95Cr – 0.55Mo – 0.30V (0.40 – 0.50C)
Aerospace Historical
2000-10-01
MAM5536A NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 47.5Ni – 22Cr – 1.5Co – 9.0Mo – 0.60W – 18.5Fe Solution Heat Treated
Aerospace Historical
2000-10-01
MAM4427 MAGNESIUM ALLOY SAND CASTINGS 4.0Y – 2.3Nd – 0.7Zr (WE43A – T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-10-01
AS6276-3 AS6276 Cap Spring
Aerospace Current
2000-10-01
AS6272-4 AS6272 Valve
Aerospace Current
2000-10-01
AS6271-3 AS6271 Valve Body
Aerospace Current
2000-10-01
AS6274-4 AS6274 Valve Cap
Aerospace Current
2000-10-01
AMS7238A Alloy PM Shapes, Corrosion, Wear, And Heat Resistant 66Co – 30Cr – 8.25W (1.10 – 1.90C)
Aerospace Historical
2000-10-01
AMS2441A Selective (Brush) Nickel Plating Low-Stressed, Low Hardness Deposit
Aerospace Current
2000-10-01
AMS2439A Selective (Brush) Nickel Plating Low-Stressed, Hard Deposit
Aerospace Current
2000-10-01
AMS6432B Steel Bars, Forgings, And Tubing 1.05Cr – 0.55Ni – 1.0Mo – 0.12V (0.43 – 0.49C)
Aerospace Historical
2000-10-01
AMS4006H Aluminum Alloy, Sheet And Plate 1.25Mn – 0.12Cu (3003-0) Annealed
Aerospace Historical
2000-10-01
AMS5841D Cobalt-Nickel Alloy, Corrosion And Heat Resistant, Bars 19Cr – 36Co – 25Ni – 7.0Mo – 0.50Cb – 2.9Ti – 0.20Al – 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated For Work Strengthening
Aerospace Historical
2000-10-01
AMS5890C NICKEL, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND EXTRUSIONS Thoria Dispersion Strengthened 2.2ThO2 Stress-Relieved
Aerospace Historical
2000-10-01
AMS4422N Magnesium Alloy Castings, Sand 6.0Al – 3.0Zn (AZ63 – T4) Solution Heat Treated
Aerospace Historical
2000-10-01
AMS4441D Magnesium Alloy Castings, Sand 3.5Ce – 0.70Zr (EK41A-T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-10-01
AMS4438D Magnesium Alloy Castings, Sand 5.7Zn – 1.8Th (ZH62A-T5) Precipitation Heat Treated
Aerospace Historical
2000-10-01
AMS4445F Magnesium Alloy Castings, Sand 3.3Th – 0.7Zr (HK31A-T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-10-01
AMS4447E Magnesium Alloy Castings, Sand 3.3Th – 2.1Zn – 0.75Zr (HZ32A-T5) Precipitation Heat Treated
Aerospace Historical
2000-10-01
AMS5784D Steel, Corrosion And Heat Resistant, Welding Wire 29Cr – 9.5Ni
Aerospace Historical
2000-10-01
AMS5804F Steel, Corrosion And Heat Resistant, Welding Wire 15Cr – 25.5Ni – 1.3Mo – 2.2Ti – 0.006B – 0.30V
Aerospace Historical
2000-10-01
AMS5864A Steel, Corrosion Resistant, Plate 13Cr – 8.0Ni – 2.2Mo – 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-10-01
AMS4530F Sheet, Strip, And Plate, Copper-Beryllium Alloy 98Cu – 1.9Be (CDA 172) Solution Heat Treated
Aerospace Historical
2000-10-01
AMS4237A Aluminum Alloy Castings, Sand 4.6Cu – 0.35Mn – 0.25Mg – 0.22Ti (206.0-T71) Solution Heat Treated And Naturally Aged
Aerospace Historical
2000-10-01
AMS4236A Aluminum Alloy Castings 4.6Cu – 0.35Mn – 0.25Mg – 0.22Ti (A206.0-T4) Solution Heat Treated And Naturally Aged
Aerospace Historical
2000-10-01
AMS4051F Aluminum Alloy Sheet And Plate, Alclad 6.8Zn – 2.8Mg – 2.0Cu – 0.23Cr (Alclad 7178-0) Annealed
Aerospace Historical
2000-10-01
AMS5882C Nickel Alloy, Corrosion And Heat Resistant, Forgings 55Ni – 15Cr – 17Co – 5.0Mo – 3.5Ti – 4.0Al – 0.025B Solution, Stabilization, And Precipitation Heat Treated Powder-Metallurgy Product
Aerospace Historical
2000-10-01
AMS6327G Steel Bars And Forgings 0.50Cr – 0.55Ni 0 0.25Mo (0.38 – 0.43C) (SAE 8740) Heat Treated, 125,000 Psi (862 MPa) Tensile Strength
Aerospace Historical
2000-10-01
AMS6263J Steel Bars, Forgings, And Tubing 1.2Cr – 3.2Ni – 0.12Mo (0.11 – 0.17C) (SAE 9315)
Aerospace Historical
2000-10-01
AMS7311F Piston Rings, Centrifugally-Cast Alloyed Iron 0.50Mo – 0.50Cu
Aerospace Historical
2000-10-01
AMS4725D Copper-Beryllium Alloy Wire 98Cu – 1.9Be Solution Heat Treated
Aerospace Historical
2000-10-01
AMS4302A Aluminum Alloy, Laminated Sheet, Aramid Fiber Reinforced 5.7Zn – 2.2Mg – 1.6Cu – 0.22Cr (7475-T761) 3, 5, 7, Or 9 Ply
Aerospace Historical
2000-10-01
AMS5825F Steel, Corrosion Resistant, Welding Wire 16.4Cr – 4.8Ni – 0.22Cb – 3.6Cu
Aerospace Historical
2000-10-01
AMS4248A Aluminum Alloy Hand Forgings And Rolled Rings 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T652) Solution Heat Treated, Stress Relief Compressed, And Precipitation Heat Treated
Aerospace Historical
2000-10-01
AMS4224B Aluminum Alloy Castings, Sand 4.0Cu – 2.1Ni – 2.0Mg – 0.30Cr – 0.30Mn – 0.13T – 0.13V (243.0) Stabilized
Aerospace Historical
2000-10-01
AMS5554D Steel, Corrosion And Heat Resistant, Seamless Tubing 16.5Cr – 4.5Ni – 2.9Mo – 0.10N Annealed
Aerospace Historical
2000-10-01
AMS5555C Nickel Wire And Ribbon 99Ni
Aerospace Historical
2000-10-01
AMS5575M Steel, Corrosion And Heat Resistant, Welded Tubing 18Cr – 10.5Ni – 0.70Cb (SAE 30347) Solution Heat Treated
Aerospace Historical
2000-10-01
AMS5611E Steel, Corrosion And Heat Resistant, Bars, Wire, Forgings, Tubing, And Rings 12Cr Ferrite Controlled, Consumable Electrode Melted
Aerospace Historical
2000-10-01
AMS5605D Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 41.5Ni – 16Cr – 37Fe – 2.9Cb – 1.8Ti Consumable Electrode Or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
Aerospace Historical
2000-10-01
AMS6423D Steel Bars, Forgings, And Tubing 0.92Cr – 0.75Ni – 0.52Mo – 0.003B – 0.04V (0.40 – 0.46C)
Aerospace Historical
2000-10-01
AMS6460E Wire, Steel Welding 0.75Si – 0.62Cr – 0.20Mo – 0.10Zr (0.10 – 0.17C)
Aerospace Historical
2000-10-01
AMS5802B Iron-Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 41Fe – 37.5Ni – 14Co – 4.8(Cb + Ta) – 1.5Ti Vacuum Melted, Low Expansion
Aerospace Historical
2000-10-01
AMS5905A Steel, Corrosion Resistant, Sheet And Strip 18Cr – 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 Ksi (1207 MPa) Tensile Strength
Aerospace Historical
2000-10-01
AMS5903A Steel, Corrosion Resistant, Sheet, Strip, And Plate 18Cr – 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-10-01
AMS5902A Steel, Corrosion Resistant, Sheet And Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 3/4 Hard, 175 Ksi (1207 MPa) Tensile Strength
Aerospace Historical
2000-10-01
AMS5704G Nickel Alloy, Corrosion And Heat Resistant, Forgings 57Ni – 19.5Cr – 13.5Co – 4.3Mo – 3.0Ti – 1.4Al – 0.05Zr – 0.006B Consumable Electrode Or Vacuum Induction Melted 1825 To 1900 °F (996 To 1038 °C) Solution, Stabilization, And Precipitation Heat Treated
Aerospace Historical
2000-10-01
AMS4635D Aluminum Bronze Bars, Rods, And Forgings 87Cu – 9Al – 3Fe Stress Relieved
Aerospace Historical
2000-10-01
AMS5817E Steel, Corrosion And Heat Resistant, Welding Wire 13Cr – 2.0Ni – 3.0W
Aerospace Historical
2000-10-01
AMS2243G Tolerances Corrosion And Heat Resistant Steel Tubing
Aerospace Historical
2000-10-01
AS5195A FITTING, ELBOW, 90°, FLARED TO PIPE
Aerospace Historical
2000-10-01
AMS5571G Steel, Corrosion And Heat Resistant, Seamless Tubing 18Cr – 10.5Ni – 0.70Cb (SAE 30347) Solution Heat Treated
Aerospace Historical
2000-10-01
AMS5632G Steel, Corrosion Resistant, Bars, Wire, And Forgings 17Cr – 0.50Mo (0.95 – 1.20C) (SAE 51440F) Free-Machining, Annealed
Aerospace Historical
2000-10-01
AMS5507E STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 17Cr – 13Ni – 2.5Mo (SAE 30316L) Solution Heat Treated
Aerospace Historical
2000-10-01
AS1300A PORT – RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
Aerospace Historical
2000-10-01
AMS4532E Sheet And Strip, Copper-Beryllium Alloy 98Cu – 1.9Be (CDA 172) Half Hard
Aerospace Historical
2000-10-01
AMS5904A Steel, Corrosion Resistant, Sheet And Strip 18Cr – 9.0Ni (SAE 30302) Cold Rolled, 1/2 Hard, 150 Ksi (1034 MPa) Tensile Strength
Aerospace Historical
2000-10-01
J1297_200010 Alternative Automotive Fuels
Automotive Historical
2000-10-01
AS621B HOSE ASSEMBLY, 3000 Psi, PTFE, FLARELESS, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
Aerospace Historical
2000-10-01
AIR1904A TIRE SPRAY SUPPRESSION – AIRPLANE Design Consideration And Testing For
Aerospace Historical
2000-10-01
AMS5814B Cobalt Alloy, Corrosion And Heat Resistant, Welding Wire 52Co – 20Cr – 20Ni – 7.5Ta Vacuum Melted
Aerospace Historical
2000-10-01
AMS4235A Aluminum Alloy Castings, 4.6Cu – 0.35Mn – 0.25Mg – 0.22Ti (A206.0-T71) Solution And Precipitation Heat Treated
Aerospace Historical
2000-10-01
AMS2248E Chemical Check Analysis Limits Corrosion And Heat Resistant Steels And Alloys, Maraging And Other Highly-Alloyed Steels, And Iron Alloys
Aerospace Historical
2000-10-01
J1703_200010 Motor Vehicle Brake Fluid
Multiple Historical
2000-10-01
AMS4179B Aluminum Alloy Forgings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7175-T7452) Solution Heat Treated, Stress Relieved, And Precipitation Heat Treated
Aerospace Historical
2000-10-01
AMS5853B Steel, Corrosion And Heat Resistant, Bars And Wire 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Consumable Electrode Melted 1800 °F (982 °C) Solution Treated And Work-Strengthened 160 Ksi (1103 MPa) Tensile Strength
Aerospace Historical
2000-10-01
ARP1110A Minimizing Stress Corrosion Cracking In Wrought Forms Of Steels And Corrosion Resistant Steels And Alloys
Aerospace Historical
2000-10-01
AMS5843D Cobalt-Nickel Alloy, Corrosion And Heat Resistant, Bars 19Cr – 36Co – 25Ni – 7.0Mo – 0.50Cb – 2.9Ti – 0.20Al – 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened, And Aged
Aerospace Historical
2000-10-01
AS1708C FITTING END, INTERNAL FLARE DESIGN STANDARD
Aerospace Historical
2000-10-01
AMS5610M Steel, Corrosion And Heat Resistant, Bars, Wire, And Forgings 12.5Cr – Low Carbon (SAE 51416, 51416Se) Free-Machining
Aerospace Historical
2000-10-01
AMS7239A Alloy PM Shapes, Corrosion, Wear, And Heat Resistant 60Co – 29Cr – 4.5W (0.90 – 1.40C)
Aerospace Historical
2000-10-01
AIR4142 Marine Component User Report (Repair Or Overhaul
Aerospace Current
2000-09-30
AIR45 PUMPS, HYDRAULIC, POWER DRIVEN, VARIABLE DELIVERY COMPOSITE OUTLINE DRAWINGS
Aerospace
2000-09-30
J1922_200009 Powertrain Control Interface For Electronic Controls Used In Medium-And Heavy-Duty Diesel On-Highway Vehicle Applications
Commercial Historical
2000-09-29
J381_200009 Windshield Defrosting Systems Test Procedure And Performance Requirements–Trucks,Buses, And Multipurpose Vehicles
Commercial Historical
2000-09-29
J2179_200009 A Test For Evaluating The Rearward Amplificiation Of Multi-Articulated Vehicles
Commercial Current
2000-09-29
J2503_200009 Drawbar Pull Performance Criteria
Automotive Historical
2000-09-29
J382_200009 Windshield Defrosting Systems Performance Requirements–Trucks, Buses, And Multipurpose Vehicles
Commercial Current
2000-09-29
J1624_200009 Fuel Crossover Line
Automotive Historical
2000-09-29
J1250_200009 In-Service Brake Performance Test Procedure–Vehicles Over 4500 Kg (10 000 Lb)
Commercial Current
2000-09-29
J1113/42_200009 Electromagnetic Compatibility–Component Test Procedure–Part 42–Conducted Transient Emissions
Automotive Historical
2000-09-27
J537_200009 Storage Batteries
Automotive Historical
2000-09-27
J1035_198601 Technical Publications For Agricultural Equipment
Commercial Current
2000-09-23
AMS4484J Magnesium Alloy Castings, Permanent Mold 9.0Al – 2.0Zn (AZ92A-T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-09-22
J1944_200009 Truck And Bus Multipurpose Vehicle Windshield Washer System
Commercial Historical
2000-09-15
ARINC762-1 TERRAIN AWARENESS AND WARNING SYSTEM (TAWS)
Aerospace Current
2000-09-15
J1025_200009 Test Procedures For Measuring Truck Tire Revolutions Per Kilometer/Mile
Automotive Historical
2000-09-12
J1269_200009 Rolling Resistance Measurement Procedure For Passenger Car, Light Truck, And Highway Truck And Bus Tires
Automotive Historical
2000-09-12
J1633_200009 Laboratory Speed Test Procedure For Light Truck Tires
Automotive Historical
2000-09-12
J1270_200009 Measurement Of Passenger Car, Light Truck, And Highway Truck And Bus Tire Rolling Resistance
Automotive Historical
2000-09-12
J1232_200009 Passenger And Light Truck Tire Traction Device Profile Determination And Classification
Automotive Historical
2000-09-12
J2544_200009 Plug-In Relay Test Methods
Automotive Current
2000-09-07
J551/11_200009 Vehicle Electromagnetic Immunity–Off-Vehicle Source
Multiple Historical
2000-09-07
J772_200009 Clearance Envelopes For Six-Bolt, Eight-Bolt, And Rear Truck Transmission Mounted Power Takeoffs
Automotive Historical
2000-09-07
J704_200009 Openings For Six- And Eight-Bolt Truck Transmission Mounted Power Take-Offs
Commercial Historical
2000-09-07
J850_200009 Fixed Rigid Barrier Collision Tests
Automotive Historical
2000-09-07
J2382_200009 Video Based Light Measurement Techniques
Automotive Historical
2000-09-01
J2442_200009 Harmonized Provisions For Installation Of Lamps And Retro- Reflecting Devices On Road Vehicles Except Motorcycles
Automotive Historical
2000-09-01
AS5385 Cargo Restraint Straps – Design Criteria And Testing Methods
Aerospace Historical
2000-09-01
AMS5593E Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 45.5Ni – 25.5Cr – 3.2Co – 3.2Mo – 3.2W – 18.5Fe Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5821F Steel, Corrosion Resistant, Welding Wire 12Cr (SAE 51410 Modified) Ferrite Control Grade
Aerospace Historical
2000-09-01
AMS5382H Cobalt Alloy, Corrosion And Heat Resistant, Investment Castings 54Co – 25.5Cr – 10.5Ni – 7.5W As Cast
Aerospace Historical
2000-09-01
AMS6304H Low-Alloy Steel, Heat-Resistant, Bars, Forgings, And Tubing 0.95Cr – 0.55Mo – 0.30V (0.40 – 0.50C)
Aerospace Historical
2000-09-01
AS7110/4B NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR RESISTANCE WELDING (SPOT, SEAM, PROJECTION)
Aerospace Historical
2000-09-01
AS7110/2B NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLASH WELDING
Aerospace Historical
2000-09-01
AS90991 NUT – HEX, BOSS CONNECTION, ALUMINUM
Aerospace Historical
2000-09-01
AMS5824D Steel, Corrosion Resistant, Welding Wire 17Cr – 7.1Ni – 1.0Al
Aerospace Historical
2000-09-01
AS91001 NUT – HEX, BOSS CONNECTION, CRES
Aerospace Historical
2000-09-01
AS38999/49A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, Receptacle, In Line Cable, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/47A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, Plug, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/48A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, Receptacle, Weld Mounting Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/42A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/41A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/40A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environmental Resistant, Removable Crimp And Hermetic Solder Contacts, Receptacle, Wall Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/46A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environmental Resistant, Removable Crimp And Hermetic Solder Contacts, Plug, Breech Coupling, Emi Grounding, Removable Crimp Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/45A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, Receptacle, Solder Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/44A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Couplings), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, Receptacle, Jam-Nut Mounting, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS38999/43A Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, Receptacle, Jam Nut Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric
Aerospace Current
2000-09-01
AS7110/1B NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR BRAZING (TORCH & INDUCTION)
Aerospace Historical
2000-09-01
AS7110/5B NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FUSION WELDING
Aerospace Historical
2000-09-01
AS7110B NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR WELDING/BRAZING
Aerospace Historical
2000-09-01
AS39029/102 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-C-38999 SERIES I, II, III AND IV CONNECTORS)
Aerospace Historical
2000-09-01
AS92001 NUT, PLAIN, HEX, BOSS CONNECTION, ALUMINUM
Aerospace Historical
2000-09-01
AS39029/103 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-C-38999 SERIES I, III, AND IV CONNECTORS)
Aerospace Historical
2000-09-01
AS5780 Core Requirement Specification For Aircraft Gas Turbine Engine Lubricants
Aerospace Historical
2000-09-01
AS39029/78 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-C-38999 SERIES II AND MIL-C-24308 CONNECTORS)
Aerospace Historical
2000-09-01
AMS5589D Nickel Alloy, Corrosion And Heat Resistant, Seamless Tubing 52.5Ni – 19Cr – 3.0Mo – 5.1Cb – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5617H Steel, Corrosion Resistant, Bars, Wire, And Forgings 12Cr – 8.5Ni – 1.2Ti – 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-09-01
AMS5701C Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 41.5Ni – 16Cr – 37Fe – 2.9Cb – 1.8Ti Consumable Electrode Or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5668H Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 72Ni – 15.5Cr – 7.0Fe – 2.5Ti – 1.0(Cb+Ta) – 0.70Al 2100 °F (1149 °C) Solution And Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS5595E Steel, Corrosion Resistant, Sheet, Strip, And Plate 9.0Mn – 20Cr – 6.5Ni – 0.28N Solution Heat Treated
Aerospace Historical
2000-09-01
J2556_200009 Radiated Emissions (Re) Narrowband Data Analysis–Power Spectral Density (Psd)
Automotive Historical
2000-09-01
AMSP46144 Plastic Sheet, Polycarbonate
Aerospace Historical
2000-09-01
AMS6418H Steel Bars, Forgings, Tubing, And Rings 1.3Mn – 1.5Si – 0.30Cr – 1.8Ni – 0.40Mo (0.23 – 0.28C)
Aerospace Current
2000-09-01
MAM4778C NICKEL ALLOY, BRAZING FILLER METAL 92Ni – 4.5Si – 3.1B 980 To 1040 °C Solidus-Liquidus Range
Aerospace Historical
2000-09-01
AS63401-2 AS63401 Ring, Split, Steel
Aerospace Current
2000-09-01
AMS7711D Sheet And Strip, Flat-Rolled, Electrical, Non-Oriented, 2.65(Si+Al), Type 47S188 Or Type 64S213, Semi-Processed
Aerospace Current
2000-09-01
AMS7712D Sheet And Strip, Flat-Rolled, Electrical, Non-Oriented, 3.0(Si+Al), Type 47s178 Or Type 64s194, Semi-Processed
Aerospace Current
2000-09-01
AMS7705D Nickel-Iron Magnetic Alloy, Bars And Forgings
Aerospace Historical
2000-09-01
AMS7701D Nickel-Iron Alloy, Magnetic, Sheet And Strip Annealed
Aerospace Historical
2000-09-01
AMS7702D Nickel-Iron Alloy, Magnetic, Sheet And Strip Cold Rolled, Half-Hard Temper
Aerospace Historical
2000-09-01
AMS6275G Steel Bars, Forgings, And Tubing, 0.40cr 0.45ni 0.12mo 0.002b (0.15-0.20c)
Aerospace Current
2000-09-01
AMSLP390 Plastic, Molding And Extrusion Material Polyethylene And Copolymers (Low, Medium, And High Density)
Aerospace Historical
2000-09-01
AMSQQA591 Aluminum Alloy Die Castings
Aerospace Historical
2000-09-01
AMSR3065 Rubber, Fabricated Products
Aerospace Historical
2000-09-01
AMSSTD182 Continuous Identification Marking Of Nickel And Nickel Base Alloys
Aerospace Historical
2000-09-01
AMSSTD184 Identification Marking Of Aluminum, Magnesium, And Titanium
Aerospace Historical
2000-09-01
AMS5810 Steel, Corrosion And Heat Resistant, Flat Wire 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V 1800 °F (982 °C) Solution Treated, Cold Drawn Or Cold Rolled And Aged, Consumable Electrode Melted
Aerospace Historical
2000-09-01
AMS6478 Steel, Bars And Forgings 3.1Cr – 11.5Ni – 13.5Co – 1.2Mo (0.21 – 0.25C) Vacuum Melted, Annealed Heat Treatable To 290 Ksi (1999 MPa) Tensile Strength
Aerospace Historical
2000-09-01
AMS2263D Tolerances Nickel, Nickel Alloy, And Cobalt Alloy Tubing
Aerospace Historical
2000-09-01
AMS7716E Sheet And Strip, Flat-Rolled, Electrical, Grain-Oriented, 3.15Si, Type 27G053, Type 30G058, Or Type 35G066, Fully-Processed
Aerospace Current
2000-09-01
AMS4860D MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS 58Cu – 39Zn – 1.2Fe – 1.0Al – 0.80Mn As Cast
Aerospace Historical
2000-09-01
AMS4855E LEADED RED BRASS, SAND AND CENTRIFUGAL CASTINGS 85Cu – 5.0Sn – 5.0Pb – 5.0Zn As Cast
Aerospace Historical
2000-09-01
AMS4862E MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS 63Cu – 24Zn – 6.2Al – 3.8Mn – 3.0Fe High Strength, As Cast
Aerospace Historical
2000-09-01
AMS5020D Steel Bars, Forgings, And Tubing, Free-Cutting 1.5Mn – 0.25Pb (0.32 – 0.39C) (11L37)
Aerospace Historical
2000-09-01
AMS5652F STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 25Cr – 20Ni – 2.0Si (SAE 30314) Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5755E Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 64Ni – 5.0Cr – 24.5Mo – 5.5Fe Solution Heat Treated
Aerospace Historical
2000-09-01
AMS4363F Forgings, Magnesium Alloy 2.0Th – 0.78Mn (HM21A – T5) Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS4419B MAGNESIUM ALLOY CASTINGS, SAND 2.5SAg – 1.1Th – 1.0Di – 0.70Zr (QH21-T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS4484 MAGNESIUM ALLOY CASTINGS (Permanent Mold) 9 Al 2 Zn (Solution Precipitation)
Aerospace Historical
2000-09-01
AMS4483C Magnesium Alloy Castings, Permanent Mold 10Al (AM100A-T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS5827G Steel, Corrosion Resistant, Covered Welding Electrodes 16.4cr 4.8ni 0.22cb 3.6cu
Aerospace Current
2000-09-01
AMS5840C Steel, Corrosion And Heat Resistant, Welding Wire 13Cr – 8.0Ni – 2.3Mo – 1.1Al Vacuum Melted
Aerospace Historical
2000-09-01
AMS5574D Steel, Corrosion And Heat Resistant, Seamless Tubing 23Cr – 13.5Ni (SAE 30309S) Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5606D Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 41.5Ni – 16Cr – 37Fe – 2.9Cb – 1.8Ti Consumable Electrode Or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5682D Nickel Alloy, Corrosion And Heat Resistant Coating, Rods And Wire 78Ni – 20Cr
Aerospace Historical
2000-09-01
AMS5310F Iron Castings, Pearlitic Malleable
Aerospace Historical
2000-09-01
AMS4425B Magnesium Alloy Castings, Sand 5.8Zn – 2.5RE – 0.70Zr (ZE63-T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS4420M Magnesium Alloy Castings, Sand 6Al – 3Zn (AZ63A-F) As Cast
Aerospace Historical
2000-09-01
AMS4444C Magnesium Alloy Castings, Sand 6.0Zn – 0.80Zr (ZK61A-T5) Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS4782E Nickel Alloy, Brazing Filler Metal 71Ni – 10Si – 19Cr 1975 To 2075 °F (1080 To 1135 °C) Solidus-Liquidus Range
Aerospace Historical
2000-09-01
AMS5061E Steel, Low Carbon, Bars And Wire 0.08 To 0.20 C
Aerospace Historical
2000-09-01
AMS5062F Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, And Plate 0.25 Carbon, Maximum
Aerospace Historical
2000-09-01
AMS7713A Iron, Electrical, Bar And Strip Cold Finished, Annealed
Aerospace Historical
2000-09-01
AMS6264H Steel, Carburizing Grade, Bars, Forgings, And Tubing 1.2Cr – 3.2Ni – 0.12Mo (0.14 – 0.20C) (SAE 9317)
Aerospace Historical
2000-09-01
AMS6324F Steel Bars, Forgings, And Tubing 0.65Cr – 0.70Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740 Modified)
Aerospace Historical
2000-09-01
AMS6325G Steel, Bars And Forgings 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740) Heat Treated, 105 Ksi (724 MPa) Tensile Strength
Aerospace Historical
2000-09-01
AMS6300D Steel Bars And Forgings 0.25Mo (0.35 – 0.40C) (SAE 4037)
Aerospace Historical
2000-09-01
AMS6358G Steel Sheet, Strip, And Plate 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740)
Aerospace Historical
2000-09-01
AMS5045G Steel, Sheet And Strip 0.25 Carbon, Maximum Hard Temper
Aerospace Historical
2000-09-01
AMS5044H Steel, Sheet And Strip 0.15 Carbon, Maximum Half Hard Temper
Aerospace Historical
2000-09-01
AMS5042K Steel, Sheet And Strip 0.15 Carbon, Maximum Forming Grade
Aerospace Historical
2000-09-01
AMS5342D Steel, Corrosion Resistant, Investment Castings 16Cr – 4.1Ni – 0.28Cb – 3.2Cu Homogenization, Solution, And Precipitation Heat Treated (H1100) 130 Ksi (896 MPa) Tensile Strength
Aerospace Historical
2000-09-01
AMS5344D Steel, Corrosion Resistant, Investment Castings 16Cr – 4.1Ni – 0.28Cb – 3.2Cu Homogenization, Solution, And Precipitation Heat Treated (H900) 180 Ksi (1241 MPa) Tensile Strength
Aerospace Historical
2000-09-01
AMSI10 Insulating Compound, Electrical, Ceramic, Class L
Aerospace Historical
2000-09-01
AMS5700E Steel, Corrosion And Heat Resistant, Bars, Forgings, And Rings 13.5Cr – 13.5Ni – 0.35Mo – 2.2W Annealed
Aerospace Historical
2000-09-01
AMS4779F Nickel Alloy, Brazing Filler Metal 94Ni – 3.5Si – 1.8B 1800 To 1950 °F (982 To 1066 °C) Solidus-Liquidus Range
Aerospace Historical
2000-09-01
AMS4306A Aluminum Alloy, Plate 6.4Zn – 2.4Mg – 2.2Cu – 0.12Zr (7150-T6151) Solution Heat Treated, Stress Relieved, And Aged
Aerospace Historical
2000-09-01
AMS5523E Steel, Corrosion And Heat Resistant, Sheet, Strip, And Plate 23Cr – 13.5Ni (SAE 30309S) Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5552E Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 46Fe – 20.5Cr – 32Ni – 1.1Ti Annealed
Aerospace Historical
2000-09-01
AMS5587D Nickel Alloy, Corrosion And Heat Resistant, Seamless Tubing 47.5Ni – 22Cr – 1.5Co – 9.0Mo – 0.60W – 18.5Fe Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5591H STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS, TUBING 12.5Cr (SAE 51410) Annealed
Aerospace Historical
2000-09-01
AMS4442E Magnesium Alloy Sand Castings 3.2Ce – 2.5Zn – 0.70Zr (EZ33A-T5) Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS4427 Magnesium Alloy Sand Castings 4.0Y – 2.3Nd – 0.7Zr (WE43A – T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS4800D Bearings, Babbitt 91Sn – 4.5Sb – 4.5Cu
Aerospace Historical
2000-09-01
AMS4890B Copper-Beryllium Alloy Castings 97Cu – 2.1Be – 0.52Co – 0.28Si Solution Heat Treated (TB00)
Aerospace Historical
2000-09-01
AMS4909F Titanium Alloy, Sheet, Strip, And Plate 5Al – 2.5Sn, Extra Low Interstitial Annealed
Aerospace Historical
2000-09-01
AMS4095B Aluminum Alloy, Alclad Sheet And Plate 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated And Cold Worked Alclad 2219-T351; Plate, Solution Heat Treated And Stress Relieved
Aerospace Historical
2000-09-01
AMSP46112 Plastic Sheet And Strip, Polyimide
Aerospace Historical
2000-09-01
AMS6396C Steel Sheet, Strip, And Plate 0.80Cr – 1.8Ni – 0.25Mo (0.49 – 0.55C) Annealed
Aerospace Historical
2000-09-01
AMS5766C Alloy, Corrosion And Heat Resistant, Bars And Forgings 21Cr – 32.5Ni – 0.38Ti – 0.38Al – 45Fe Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5744D Steel, Corrosion And Heat Resistant, Bars And Forgings 15.5Cr – 4.5Ni – 2.9Mo – 0.10N Heat Treated, 170 Ksi (1172 MPa) Tensile Strength
Aerospace Historical
2000-09-01
AMS5834B Cobalt Alloy, Corrosion And Heat Resistant, Round Wire 20Cr – 15Ni – 40Co – 7.0Mo – 16Fe Solution Heat Treated, Cold Drawn, And Aged
Aerospace Historical
2000-09-01
AMS5833B Cobalt Alloy, Corrosion And Heat Resistant, Round Wire 20Cr – 15Ni – 40Co – 7.0Mo – 16Fe Solution Heat Treated And Cold Drawn
Aerospace Historical
2000-09-01
AMS5893A Iron-Nickel Alloy, Bars, Forgings, And Rings 42Fe – 37.5Ni – 14Co – 4.8(Cb + Ta) – 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
Aerospace Historical
2000-09-01
AMS5686F Steel, Corrosion Resistant, Rivet Wire 18Cr – 11.5Ni (SAE 30305) Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5600D Steel, Corrosion Resistant, Sheet Laminated, Edge Bonded
Aerospace Historical
2000-09-01
AS5127/2 Test Method For Aerospace Firewall Sealant Flame Penetration
Aerospace Historical
2000-09-01
AMS4634 ALUMINUM BRONZE BARS, RODS, AND FORGINGS 90.5Cu – 7.5Al – 1.9Si Stress Relieved
Aerospace Historical
2000-09-01
AMS5584 STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS AND WELDED HYDRAULIC TUBING 17Cr – 12Ni – 1.5Mo C Max Cold Drawn, One Eighth-Hard Temper
Aerospace Historical
2000-09-01
AMS6302F Low-Alloy Steel, Heat-Resistant, Bars, Forgings, And Tubing 0.65Si – 1.25Cr – 0.50Mo – 0.25V (0.28 – 0.33C)
Aerospace Historical
2000-09-01
AMS5343D Steel, Corrosion Resistant, Investment Castings 16Cr – 4.1Ni – 0.28Cb – 3.2Cu Homogenization, Solution, And Precipitation Heat Treated (H1000) 150 Ksi (1034 MPa) Tensile Strength
Aerospace Historical
2000-09-01
AMS6451B Steel, Spring Wire 1.4Si – 0.65Cr (0.51 – 0.59C) (SAE 9254) Oil Tempered
Aerospace Historical
2000-09-01
AMS5390D Nickel Alloy, Corrosion And Heat Resistant, Investment Castings 47.5Ni – 22Cr – 1.5Co – 9Mo – 0.60W – 18.5Fe As Cast
Aerospace Historical
2000-09-01
AMS5618E Steel, Corrosion Resistant, Bars, Wire, And Forgings 17Cr – 0.52Mo (0.95 – 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted
Aerospace Historical
2000-09-01
AMS3146 Coating, Interior Aircraft Cabin Low Heat And Smoke Release
Aerospace Current
2000-09-01
AMSQQA367 Aluminum Alloy Forgings
Aerospace Historical
2000-09-01
AMS5842D Cobalt-Nickel Alloy, Corrosion And Heat Resistant, Bars 19Cr – 36Co – 25Ni – 7.0Mo – 0.50Cb – 2.9Ti – 0.20Al – 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated And Work Strengthened
Aerospace Historical
2000-09-01
AMS5569 Steel, Corrosion And Heat Resistant, Seamless And Welded Hydraulic Tubing 19Cr – 9.5Ni – 0.03C Max Cold Drawn, One Eighth-Hard Temper
Aerospace Historical
2000-09-01
AMS5631D Steel, Corrosion Resistant, Bars And Forgings 17Cr (0.60 – 0.75C) (SAE 51440A)
Aerospace Historical
2000-09-01
AMS5635D Steel, Corrosion Resistant, Bars, Wire, And Forgings 18Cr – 9Ni – 0.21Pb (303Pb) Free-Machining, Solution Heat Treated
Aerospace Historical
2000-09-01
AMS4870E Aluminum Bronze, Centrifugal And Chill Castings 85Cu – 11Al – 3.6Fe As Cast
Aerospace Historical
2000-09-01
AMS5702C Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 41.5Ni – 16Cr – 37Fe – 2.9Cb – 1.8Ti Consumable Electrode Or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5703C Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 41.5Ni – 16Cr – 37Fe – 2.9Cb – 1.8Ti Consumable Electrode Or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, And Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS5768J Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 21Cr – 20Ni – 20Co – 3.0Mo – 2.5W – 1.0Cb – 0.15N – 31Fe Solution And Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS5636E Steel, Corrosion Resistant, Bars And Wire 18Cr – 9.0Ni (SAE 30302) Solution Heat Treated And Cold Drawn 100 Ksi (689 MPa) Tensile Strength
Aerospace Historical
2000-09-01
AMS4778G Nickel Alloy, Brazing Filler Metal 92Ni – 4.5Si – 3.1B 1800 To 1900 °F Solidus-Liquidus Range
Aerospace Historical
2000-09-01
AMS5826C Steel, Corrosion And Heat Resistant, Welding Wire 15Cr – 5.1Ni – 0.30Cb – 3.2Cu
Aerospace Historical
2000-09-01
J1144_200009 Towed Vehicle Drivetrain Test Procedure Passenger Cars, Vans, And Light-Duty Trucks
Automotive Historical
2000-09-01
AMS4439D MAGNESIUM ALLOY CASTINGS, SAND 4.2Zn – 1.2Ce – 0.7Zr (ZE41A-T5) Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS5503D Steel, Corrosion Resistant, Sheet, Strip, And Plate 17Cr (SAE 51430) Annealed
Aerospace Historical
2000-09-01
AMS5508E STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 13Cr – 2.0Ni – 3.0W Annealed
Aerospace Historical
2000-09-01
AMS4633 Bronze, Aluminum Silicon, Rods, Bars, And Forgings 90Cu – 7.0Al – 1.8Si Drawn And Stress Relieved (HR50)
Aerospace Historical
2000-09-01
AMS5581C Nickel Alloy, Corrosion And Heat Resistant, Seamless Or Welded Tubing 62Ni – 21.5Cr – 9.0Mo – 3.7Cb Annealed
Aerospace Historical
2000-09-01
AS28775 PACKING, PREFORMED, HYDRAULIC, +275°F (“O” RING)
Aerospace Historical
2000-09-01
AMS7735C Alloy Wire, Round 35Pd – 30Ag – 14Cu – 10Au – 10Pt – 0.85Zn Solution Heat Treated
Aerospace Historical
2000-09-01
AMS5383D Nickel Alloy, Corrosion And Heat Resistant, Investment Castings 52.5Ni – 19Cr – 3.0Mo – 5.1(Cb+Ta) – 0.90Ti – 0.60Al – 18Fe Vacuum Melted Homogenization And Solution Heat Treated
Aerospace Historical
2000-09-01
J1939/1_200009 Recommended Practice For Control And Communications Network For On-Highway Equipment
Commercial Historical
2000-09-01
AMS6395E Steel Sheet, Strip, And Plate 0.95Cr – 0.20Mo (0.38 – 0.43C) (SAE 4140)
Aerospace Historical
2000-09-01
AMS6490E Steel Bars, Forgings, And Tubing 4.0Cr – 4.2Mo – 1.0V (0.77 – 0.85C) Premium Aircraft-Quality For Bearing Applications Consumable Electrode Vacuum Melted
Aerospace Historical
2000-09-01
AMS5786D Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 62.5Ni – 5.0Cr – 24.5Mo – 5.5Fe
Aerospace Historical
2000-09-01
AMS5679F NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 73Ni – 15.5Cr – 2.2Cb – 8.0Fe
Aerospace Historical
2000-09-01
AMS2280A Trace Element Control Nickel Alloy Castings
Aerospace Historical
2000-09-01
AMS6470K Steel, Nitriding, Bars, Forgings, And Tubing 1.6Cr – 0.35Mo – 1.1Al (0.38 – 0.43C)
Aerospace Historical
2000-09-01
AS7110/6B NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR LASER WELDING
Aerospace Historical
2000-09-01
AMS2759/2C Heat Treatment Of Low-Alloy Steel Parts Minimum Tensile Strength 220 Ksi (1517 MPa) And Higher
Aerospace Historical
2000-09-01
AMS6408A Steel, Hotwork Tool, Bars And Forgings 5.25Cr – 1.5Mo – 1.0V (0.35-0.45C) Electroslag Remelted (ESR) Or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
Aerospace Historical
2000-09-01
AMS6348B Steel, Bars 0.95Cr – 0.20Mo (0.28 To 0.33C) (SAE 4130) Normalized
Aerospace Historical
2000-09-01
AMS6440K Steel, Bars, Forgings, And Tubing 1.45Cr (0.98 – 1.10C) (SAE 52100) For Bearing Applications
Aerospace Historical
2000-09-01
AMS2269E Chemical Check Analysis Limits Nickel, Nickel Alloys, And Cobalt Alloys
Aerospace Historical
2000-09-01
AMS2759/1C Heat Treatment Of Carbon And Low-Alloy Steel Parts Minimum Tensile Strength Below 220 Ksi (1517 MPa)
Aerospace Historical
2000-09-01
AMS4304 Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, And Precipitation Heat Treated
Aerospace Historical
2000-09-01
AMS5630G Steel, Corrosion Resistant, Bars, Wire, And Forgings 17Cr – 0.52Mo (0.95 – 1.20C) (SAE 51440C)
Aerospace Historical
2000-09-01
AS9101 Quality System Assessment
Aerospace Historical
2000-09-01
J1343_200008 Information Relating To Duty Cycles And Average Power Requirements Of Truck And Bus Engine Accessories
Commercial Current
2000-08-31
J1890_200008 Performance Assurance Of Remanufactured, Hydraulically-Operated Rack And Pinion Steering Gears
Automotive Historical
2000-08-29
J1915_200008 Recommended Remanufacturing Procedures For Manual Transmission Clutch Assemblies
Commercial Historical
2000-08-28
J1924_200008 OEM/Vendor Interface Specification For Vehicle Electronic Programming Stations
Commercial Current
2000-08-28
J2314_200008 Ethics For Accident Investigation And Reconstruction
Automotive Historical
2000-08-22
J592_200008 Sidemarker Lamps For Use On Road Vehicles Less Than 2032 Mm In Overall Width
Automotive Historical
2000-08-22
J198_200008 Windshield Wiper Systems–Trucks, Buses, And Multipurpose Vehicles
Automotive Historical
2000-08-21
J1784_200008 Specifications And Standards For Marine Hydraulic Systems And Components
Commercial Current
2000-08-20
AMS5707J Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 58Ni – 19.5Cr – 13.5Co – 4.3Mo – 3.0Ti – 1.4Al – 0.05Zr – 0.006B Consumable Electrode Or Vacuum Induction Melted 1825 To 1900 °F (996 To 1038 °C) Solution, Stabilization, And Precipitation Heat Treated
Aerospace Historical
2000-08-01
AS9317 SCREW, MACHINE – STEEL, SLOTTED HEXAGON HEAD, .250-28 NI-CAD PLATE
Aerospace Historical
2000-08-01
AS9928 BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, STEEL AMS 6322, CADMIUM PLATED, .500-20 UNJF-3A
Aerospace Historical
2000-08-01
ARP1282A Survival Kit – Life Rafts And Slide/Rafts
Aerospace Historical
2000-08-01
AS1946A Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up To 1500 Psi And 450 °F, Hydraulic And Pneumatic
Aerospace Historical
2000-08-01
AS9360 NUT, PLAIN, HEX-DRILLED – A-286, SILVER PLATED
Aerospace Historical
2000-08-01
AMS3377 Sealing Compound, Electrically Conductive Corrosion Inhibiting
Aerospace Historical
2000-08-01
AMS5399C Nickel Alloy, Corrosion And Heat Resistant, Investment Castings 52Ni – 19Cr – 11Co – 9.8Mo – 3.2Ti – 1.6Al – 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
Aerospace Historical
2000-08-01
AMS5907 STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 17Cr – 12Ni – 2.5Mo (SAE 30316) Cold Rolled, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-08-01
AS9681 BOLT, MACHINE – STEEL, AMS 6322, CADMIUM PLATED, DOUBLE HEXAGON, EXTENDED WASHER HEAD, CUP WASHER LOCKED, .250-28 UNJF-3A
Aerospace Historical
2000-08-01
AS9680 BOLT, MACHINE – STEEL, AMS 6322, CADMIUM PLATED, DOUBLE HEXAGON, EXTENDED WASHER HEAD, CUP WASHER LOCKED, .190-32 UNJF-3A
Aerospace Historical
2000-08-01
AS9219 BOLT, MACHINE – STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, .3125-24 UNJF-3A
Aerospace Historical
2000-08-01
AS9517 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, HEXAGON HEAD, .164-36 UNJF-3A
Aerospace Historical
2000-08-01
AMS3255 Sealing Tape, Polytetrafluoroethylene, Expanded (EPTFE) Oil And Water Resistant
Aerospace Historical
2000-08-01
AS9398 BOLT, TEE HEAD – AMS 6322, CHAMFERED, .250-28 UNJF-3A, CADMIUM PLATE (ASG)
Aerospace Historical
2000-08-01
AS9454 BOLT, MACHINE, HEXAGON HEAD, STEEL, .375-24 UNJF-3A
Aerospace Historical
2000-08-01
AS9450 SCREW MACHINE HEXAGON HEAD STEEL 164-36 UNJF-3A
Aerospace Historical
2000-08-01
ARP682C Safety Lap Belts (For Civil Transport Aircraft)
Aerospace Current
2000-08-01
AIR839C Recommended Materials And Practices For Use With Cryogenic Propellants
Aerospace Current
2000-08-01
AS150426 NUT – HEX, CHECK
Aerospace Historical
2000-08-01
AS9276 WASHER, KEY – CRES, AMS 5510, 180 DEG. LOCKING
Aerospace Historical
2000-08-01
AS5205 NUT, FITTING, ENGINE, FLARED
Aerospace Historical
2000-08-01
ARP998B Crew Restraint System
Aerospace Current
2000-08-01
AS116961 SCREW – OVAL FILLISTER DRILLED HEAD, .138-32
Aerospace Historical
2000-08-01
AS4707A Test Methods Evaluation Of Nonflammable, Chlorotrifluoroethylene Base Hydraulic Fluid
Aerospace Current
2000-08-01
AS172236 NUT, SPANNER, BEARING RETAINING, AERONAUTICAL (ASG)
Aerospace Historical
2000-08-01
AS9208 BOLT, MACHINE – STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .190-32 UNJF-3A
Aerospace Historical
2000-08-01
AS9397 BOLT, TEE HEAD – AMS 6322, CHAMFERED, .190-32 UNJF-3A, CADMIUM PLATE (ASG)
Aerospace Historical
2000-08-01
AS9583 BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .190-32 UNJF-3A
Aerospace Historical
2000-08-01
AS9579 BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, AMS 5731, SILVER PLATED, .500-20 UNJF-3A
Aerospace Historical
2000-08-01
AS9555 SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .164-36 UNJF-3A
Aerospace Historical
2000-08-01
AS9573 SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, .164-36 UNJF-3A
Aerospace Historical
2000-08-01
AS9554 SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .138-40 UNJF-3A
Aerospace Historical
2000-08-01
AS1424C Hose Assemblies, Metal, Medium Pressure, High Temperature
Aerospace Historical
2000-08-01
AS9358 NUT, CASTELLATED, HEXAGON-A-286
Aerospace Historical
2000-08-01
SSB1C Guidelines For Using Plastic Encapsulated Microcircuits And Semiconductors In Military, Aerospace And Other Rugged Applications
Aerospace Historical
2000-08-01
AS153D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRIAGHT TO STRAIGHT, FLARED, LIGHTWEIGHT
Aerospace Historical
2000-08-01
AS154C HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 45°, FLARED, LIGHTWEIGHT
Aerospace Historical
2000-08-01
AS155C HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 90°, FLARED, LIGHTWEIGHT
Aerospace Historical
2000-08-01
AS156C HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 45°, FLARED, LIGHTWEIGHT
Aerospace Historical
2000-08-01
AS158C HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 90° TO 90°, FLARED, LIGHTWEIGHT
Aerospace Historical
2000-08-01
AS157C HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 90°, FLARED, LIGHTWEIGHT
Aerospace Historical
2000-08-01
AS9679 BOLT, MACHINE – CRES, AMS 5731, DOUBLE HEXAGON, EXTENDED WASHER HEAD, CUP WASHER LOCKED, .375-24 UNJF-3A
Aerospace Historical
2000-08-01
AS9678 BOLT, MACHINE – CRES, AMS 5731, DOUBLE HEXAGON, EXTENDED WASHER HEAD, CUP WASHER LOCKED, .3125-24 UNJF-3A
Aerospace Historical
2000-08-01
AS9572 SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, .138-40 UNJF-3A
Aerospace Historical
2000-08-01
AS5161A FITTING, BOLT, FLUID PASSAGE
Aerospace Historical
2000-08-01
AS7475B Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 Ksi, Procurement Specification
Aerospace Historical
2000-08-01
AS126275 STUD – STRAIGHT, .3125-18 X .3125-24
Aerospace Historical
2000-08-01
AMS5886A Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 50Ni – 20Cr – 20Co – 5.8Mo – 2.2Ti – 0.45Al Consumable Electrode Or Vacuum Induction Melted 2100 °F (1149 °C) Solution Heat Treated
Aerospace Historical
2000-08-01
AS1339E Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 Psi, 400 °F, Lightweight, Hydraulic And Pneumatic
Aerospace Historical
2000-08-01
AMS5521G Steel, Corrosion And Heat Resistant, Sheet, Strip, And Plate 25Cr – 20Ni (SAE 30310S) Solution Heat Treated
Aerospace Historical
2000-08-01
AS63700-1 AS63700-749 Clamp, Loop Style (Heel Lock) Cushion Reinforced (Electrical Harness). (For 5,00 Mm And 0.1900 Inch Fasteners)
Aerospace Current
2000-08-01
J2474_200008 Self Propelled Sweepers And Scrubbers Battery Run-Tim
Automotive Historical
2000-08-01
J2441_200008 Shot Peening
Automotive Historical
2000-08-01
J2506_200008 Material Handler Nomenclature
Commercial Historical
2000-08-01
AS63402-2 AS63402 Pin, Quick-Release, ‘T’ Handle, Single Acting, Alloy Steel
Aerospace Current
2000-08-01
AS63403-2 AS63403 Pin, Quick-Release, ‘L’ Handle, Single Acting, Alloy Steel
Aerospace Current
2000-08-01
AMS4241A Aluminum Alloy Castings 7.0Si – 0.58Mg – 0.15Ti – 0.06Be (D357.0-T6) Solution And Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
Aerospace Historical
2000-08-01
AMS5874B Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 29Fe – 22Cr – 21Ni – 18.5Co – 3.2Mo – 2.8W – 0.78Ta -0.30Al – 0.05Zr – 0.05La – 0.20N Solution Heat Treated
Aerospace Historical
2000-08-01
AMS5865C NICKEL, CORROSION AND HEAT RESISTANT, SHEET AND STRIP Thoria Dispersion Strengthened 2.2ThO2
Aerospace Historical
2000-08-01
AMS2451/7 Plating, Brush, Nickel Low Stress, Medium-Hardness Deposit
Aerospace Historical
2000-08-01
AMS2451/8 Plating, Brush, Non-Cyanide Silver General Purpose
Aerospace Historical
2000-08-01
AMS6461H Steel, Welding Wire 0.95Cr – 0.20V (0.28 – 0.33C) (SAE 6130) Vacuum Melted, Environment Controlled Packaging
Aerospace Historical
2000-08-01
AMS4303A Aluminum Alloy Plate 2.7Cu – 2.2Li – 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, And Aged
Aerospace Historical
2000-08-01
AMS5672B Steel Wire, Corrosion Resistant 11.8Cr – 8.5Ni – 0.30(Cb + Ta) – 1.1Ti – 2.0Cu Precipitation Hardenable, Spring Temper
Aerospace Historical
2000-08-01
AMS2451A Plating, Brush General Requirements
Aerospace Historical
2000-08-01
AMS4152L Aluminum Alloy Extrusions 4.4Cu – 1.5Mg – 0.60Mn (2024-T3) Solution Heat Treated
Aerospace Historical
2000-08-01
AMS4147C Aluminum Alloy Forgings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr(7075-T7352) Solution Heat Treated, Stress Relieved By Compression, And Overaged
Aerospace Historical
2000-08-01
AMS4201C Aluminum Alloy Plate 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
2000-08-01
AMS4362E Forgings, Magnesium Alloy 5.5Zn – 0.45Zr (ZK60A-T5) Precipitation Heat Treated
Aerospace Historical
2000-08-01
AMS4776F Nickel Alloy, Brazing Filler Metal 73Ni – 4.5Si – 14Cr – 3.1B – 4.5Fe (Low Carbon) 1790 To 1970 °F (977 To 1077 °C) Solidus-Liquidus Range
Aerospace Historical
2000-08-01
AMS4777F Nickel Alloy, Brazing Filler Metal 82Ni – 4.5Si – 7.0Cr – 3.1B – 3.0Fe 1780 To 1830 °F (971 To 999 °C) Solidus-Liquidus Range
Aerospace Historical
2000-08-01
AMS4775G Nickel Alloy, Brazing Filler Metal 73Ni – 0.75C – 4.5Si – 14Cr – 3.1B – 4.5Fe 1790 To 1970 °F (977 To 1077 °C) Solidus-Liquidus Range
Aerospace Historical
2000-08-01
AMS3100A Adhesion Promoter For Polysulfide Sealing Compounds
Aerospace Historical
2000-08-01
AMS4066B Aluminum Alloy, Drawn, Round Seamless Tubing 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti – (2219-T8511) Solution Heat Treated, Stress Relieved By Stretching And Precipitation Heat Treated
Aerospace Historical
2000-08-01
AMS6458G Steel, Welding Wire 0.65Si – 1.25Cr – 0.50Mo – 0.30V (0.28 – 0.33C) Vacuum Melted, Environment Controlled Packaging
Aerospace Historical
2000-08-01
AMS5858B Steel, Corrosion And Heat Resistant, Sheet, Strip, And Plate 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Multiple Melted, 1800 °F (982 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable
Aerospace Historical
2000-08-01
AMS5875B Cobalt Alloy, Corrosion And Heat Resistant, Strip 20Cr – 15Ni – 40Co – 7.0Mo – 16Fe Solution Heat Treated, Cold Rolled, And Aged
Aerospace Historical
2000-08-01
AMS5867 Steel, Corrosion And Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed
Aerospace Historical
2000-08-01
AMS5870C Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 60.5Ni – 23Cr – 14Fe – 0.35Ti – 1.4Al Solution Heat Treated
Aerospace Historical
2000-08-01
AMS5905 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr – 9.0Ni (SAE 30302) Cold Rolled, 175 Ksi (1207 MPa) Tensile Strength
Aerospace Historical
2000-08-01
AMS5903 STEEL SHEET, STRIP, AND PLATE, CORROSION RESISTANT 18Cr – 9.0Ni (SAE 30302) Cold Rolled, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-08-01
AMS5902 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr – 8Ni (SAE 30301) Cold Rolled, 175 Ksi (1207 MPa) Tensile Strength
Aerospace Historical
2000-08-01
AMS5642J Steel, Corrosion And Heat Resistant, Bars, Wire, And Forgings 18Cr – 10.5Ni – 0.60Cb Free-Machining, Solution Heat Treated
Aerospace Historical
2000-08-01
AMS5641F Steel, Corrosion Resistant, Bars, Wire, And Forgings 18.5Cr – 10Ni – 0.22Se (SAE 30303Se) Free-Machining; Swaging Or Upsetting Solution Heat Treated
Aerospace Historical
2000-08-01
AMS5895B STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V Consumable Electrode Melted, 1750 °F (954 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable
Aerospace Historical
2000-08-01
AMS5690K STEEL, CORROSION AND HEAT RESISTANT, WIRE 17Cr – 12Ni – 2.5Mo (SAE 30316) Solution Heat Treated
Aerospace Historical
2000-08-01
AS172321 NUT – SPANNER, AERONAUTICAL
Aerospace Historical
2000-08-01
AMS5726B Steel Bars And Wire, Corrosion And Heat Resistant 15Cr – 25.5Ni – 1.2Mo – 2.1Ti – 0.006B – 0.30V 1800 °F (982 °C) Solution Heat Treated And Work-Strengthened Consumable Electrode Melted
Aerospace Historical
2000-08-01
AMS5631C STEEL, CORROSION RESISTANT, BARS AND FORGINGS 17Cr (0.60 – 0.75C) (SAE 51440A)
Aerospace Historical
2000-08-01
AMS5637F Steel, Corrosion Resistant, Bars And Wire 18Cr – 9.0Ni (SAE 30302) Solution Heat Treated And Cold Drawn 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-08-01
AMS5910 STEEL SHEET, STRIP, AND PLATE, CORROSION RESISTANT 19Cr – 9.2Ni (SAE 30304) Cold Rolled, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-08-01
AMS5876B Cobalt Alloy, Corrosion And Heat Resistant, Strip 20Cr – 15Ni – 40Co – 7.0Mo – 16Fe Solution Heat Treated And Cold Rolled Vacuum Induction Plus Vacuum Consumable Electrode Melted
Aerospace Historical
2000-08-01
AMS5904 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr – 9.0Ni (SAE 30302) Cold Rolled, 150 Ksi (1034 MPs) Tensile Strength
Aerospace Historical
2000-08-01
AS9557 BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .250-28 UNJF-3A
Aerospace Historical
2000-08-01
AMS5901 STEEL SHEET, STRIP, AND PLATE, CORROSION RESISTANT 18Cr – 8Ni (SAE 30301) Solution Heat Treated
Aerospace Historical
2000-08-01
AMS6457B Steel, Welding Wire 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) Vacuum Melted, Environment Controlled Packaging
Aerospace Historical
2000-08-01
AMS4031F Aluminum Alloy, Sheet And Plate 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti (2219-0) Annealed
Aerospace Historical
2000-08-01
AMS5528F Steel, Corrosion Resistant, Sheet, Strip, And Plate 17Cr – 7.1Ni – 1.1Al Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-08-01
AMSR83248/2 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid And Compression Set Resistant (O-Rings, Class 2, 90 Hardness)
Aerospace Historical
2000-08-01
AMSR83248/1 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid And Compression Set Resistant (O-Rings, Class 1, 75 Hardness)
Aerospace Historical
2000-08-01
AMS5542L Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 72Ni – 15.5Cr – 0.95Cb – 2.5Ti – 0.70Al – 7.0Fe Annealed
Aerospace Historical
2000-08-01
AMS2771B Heat Treatment Of Aluminum Alloy Castings
Aerospace Historical
2000-08-01
AMS4342D Aluminum Alloy, Extrusions 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, And Overaged
Aerospace Historical
2000-08-01
AMS5713H Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 53Ni – 19Cr – 11Co – 9.8Mo – 3.2Ti – 1.6Al – 0.006B Vacuum Melted, Solution And Precipitation Heat Treated
Aerospace Historical
2000-08-01
AMS4994 Titanium Alloy Powdered Metal Products 6Al – 4V Hot Isostatically Pressed, Annealed
Aerospace Historical
2000-08-01
AMS5540L Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 74Ni – 15.5Cr – 8.0Fe Annealed
Aerospace Historical
2000-08-01
AMS5698F Nickel Alloy, Corrosion And Heat Resistant, Wire 72Ni – 15.5Cr – 0.95Cb – 2.5Ti – 0.70Al – 7.0Fe No. 1 Temper, Precipitation Hardenable
Aerospace Historical
2000-08-01
AS9516 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, HEXAGON HEAD, .138-40 UNJF-3A
Aerospace Historical
2000-08-01
AS9316 SCREW, MACHINE – STEEL, SLOTTED HEXAGON HEAD, .190-32, NI-CAD PLATE
Aerospace Historical
2000-08-01
AMS5597D NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 52.5Ni – 19Cr – 3.0Mo – 5.1Cb – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
Aerospace Historical
2000-08-01
AMS5884A Iron-Nickel Alloy, Bars, Forgings, And Rings 42Fe – 37.5Ni – 14Co – 4.8Cb – 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
Aerospace Historical
2000-08-01
AS9685 BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL AMS 6304, DIFFUSED NICKEL CADMIUM PLATE, .190-32 UNJF-3A
Aerospace Historical
2000-08-01
AMS2440A Inspection Of Ground, Chromium Plated Steel Parts
Aerospace Historical
2000-08-01
AMS5010J Steel Bars Free Machining (SAE 1212 Or SAE 1215) Cold Drawn
Aerospace Historical
2000-08-01
AMS4088J Aluminum Alloy, Drawn, Seamless Tubing 4.4Cu – 1.5Mg – 0.60Mn (2024-T3) Solution Heat Treated And Cold Worked
Aerospace Historical
2000-08-01
AMS5738C Steel Bars, Corrosion Resistant 18Cr – 9Ni (SAE 30303F) Free Machining, High Yield Strength Solution Heat Treated And Cold Worked
Aerospace Historical
2000-08-01
AMS5699F Nickel Alloy, Corrosion And Heat Resistant, Wire 72Ni – 15.5Cr – 0.95Cb – 2.5Ti – 0.70Al – 7.0Fe Spring Temper, Precipitation Hardenable
Aerospace Historical
2000-08-01
AS4059C Aerospace Fluid Power – Cleanliness Classification For Hydraulic Fluids
Aerospace Historical
2000-08-01
AS9102 Aerospace First Article Inspection Requirement
Aerospace Historical
2000-08-01
AMS5906 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr – 9.0Ni (SAE 30302) Cold Rolled, 185 Ksi (1276 MPa) Tensile
Aerospace Historical
2000-08-01
AMS2759/3C Heat Treatment Precipitation-Hardening Corrosion-Resistant And Maraging Steel Parts
Aerospace Historical
2000-08-01
J859_200007 Numbering System For Designating Grades Of Cast Ferrous Materials
Automotive Current
2000-07-28
J1967_200007 Retroreflective Materials For Vehicle Conspicuity
Automotive Historical
2000-07-24
J1787_200007 Measurement Of The Total Ash Content Of Aviation Piston Engine Oils By A Calculation Method
Aerospace Historical
2000-07-24
J1283_200007 Electrical Connector For Auxiliary Starting Of Construction,Agricultural, And Off-Road Machinery
Commercial Historical
2000-07-19
AMS5339E Steel, Maraging, Investment Castings 17Ni – 10Co – 4.6Mo – 0.30Ti – 0.06Al Vacuum Melted Homogenized, Overaged, And Solution Heat Treated
Aerospace Historical
2000-07-17
J2396_200007 Definitions And Experimental Measures Related To The Specification Of Driver Visual Behavior Using Video Based Techniques
Automotive Historical
2000-07-14
AMS5337C Steel, Maraging, Investment Castings 18.5Ni – 9.0Co – 5.0Mo – 0.70Ti – 0.12Al Vacuum Melted Homogenized, Overaged, And Solution Heat Treated
Aerospace Historical
2000-07-11
J2140_200007 General Requirement For Preformed Hoses For Air Induction On Heavy-Duty Engines
Commercial Historical
2000-07-05
ARP4737SUP1 Aircraft Deicing/Anti-Icing Methods (Supplement 1)
Aerospace Historical
2000-07-01
ARP4493 Aerospace – Direct Drive Servovalves
Aerospace Historical
2000-07-01
AS39029/71 CONTACTS, ELECTRICAL CONNECTOR, PIN, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-C-38999 SERIES I, II, III AND IV, MIL-C-24308, MIL-C-83733, AND MIL-C-55302/69 CONNECTORS)
Aerospace Historical
2000-07-01
AS39029/72 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-C-38999 SERIES I, II, III, AND IV, MIL-C-24308, AND MIL-C-55302/68, /71, AND /75 CONNECTORS)
Aerospace Historical
2000-07-01
AS39029/76 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-C-38999 SERIES I, II, III, IV AND MIL-C-24308 CONNECTORS)
Aerospace Historical
2000-07-01
AS39029/87 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-C-38999 SERIES I, II, III, AND IV, MIL-C-24308, AND MIL-C-83733)
Aerospace Historical
2000-07-01
AS39029/104 CONTACTS, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SHIELDED, SIZE 8 (FOR MIL-C-28840)
Aerospace Historical
2000-07-01
AS39029/100 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 5 (FOR DOD-C-83527 CONNECTORS)
Aerospace Historical
2000-07-01
AS39029/105 CONTACTS, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SHIELDED, SIZE 8 (FOR MIL-C-28840)
Aerospace Historical
2000-07-01
AS39029/51 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-83733 CONNECTORS)
Aerospace Historical
2000-07-01
AS39029/28 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-C-38999 SERIES I, II, III AND IV CONNECTORS)
Aerospace Historical
2000-07-01
AS39029/75 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-C-38999 SERIES I, III, AND IV CONNECTORS)
Aerospace Historical
2000-07-01
AS1005E TEE, STANDARD AND REDUCER, FLARELESS TUBE
Aerospace Historical
2000-07-01
AS1006D CROSS, STANDARD AND REDUCER, FLARELESS TUBE
Aerospace Historical
2000-07-01
AS39029/56 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-38999 SERIES I, III, AND IV CONNECTORS)
Aerospace Historical
2000-07-01
AS39029/77 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-C-38999 SERIES I, III, AND AND IV CONNECTORS)
Aerospace Historical
2000-07-01
AS39029/58 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-24308, MIL-C-38999 SERIES I, II, III, AND IV, AND MIL-C-55302/69 AND MIL-C-83733 CONNECTORS)
Aerospace Historical
2000-07-01
AS5192 FITTING, TEE, INTERNAL STRAIGHT THREAD PORT
Aerospace Historical
2000-07-01
AS1008E ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARELESS TUBE
Aerospace Historical
2000-07-01
AS1001E TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARELESS TUBE
Aerospace Historical
2000-07-01
AS1002E TEE, STANDARD AND REDUCER, BULKHEAD AND INTERNAL PORT ON RUN, FLARELESS TUBE
Aerospace Historical
2000-07-01
AS1004D ELBOW, 90°, STANDARD AND REDUCER, FLARELESS TUBE
Aerospace Historical
2000-07-01
AS1709 Coupling Assembly, Hydraulic Self Sealing, Quick Disconnect
Aerospace Historical
2000-07-01
AS39029/59 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-C-38999 SERIES I, III, AND IV CONNECTORS)
Aerospace Historical
2000-07-01
AS5165 FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE
Aerospace Historical
2000-07-01
AS5164 FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 45°
Aerospace Historical
2000-07-01
AS5162 FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90°
Aerospace Historical
2000-07-01
AS120D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 90° TO 90°, FLARELESS LIGHTWEIGHT
Aerospace Historical
2000-07-01
AS119D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 90°, FLARELESS LIGHTWEIGHT
Aerospace Historical
2000-07-01
AS118D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 45°, FLARELESS, LIGHTWEIGHT
Aerospace Historical
2000-07-01
AS115D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO STRAIGHT, FLARELESS, LIGHTWEIGHT
Aerospace Historical
2000-07-01
AS117D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 90°, FLARELESS, LIGHTWEIGHT
Aerospace Historical
2000-07-01
AMSH6088C Heat Treatment Of Aluminum Alloys
Aerospace Current
2000-07-01
AS1007D UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS TUBE
Aerospace Historical
2000-07-01
AMS5619A Bars And Forgings, 14cr 4.0mo (1.00-1.10c)
Aerospace Current
2000-07-01
AMS4265A Aluminum Alloy, Particulate Reinforced Extrusions 6092/Sic/25p – T6p Solution Heat Treated, Quenched, And Precipitation Heat Treated
Aerospace Current
2000-07-01
AMSA8625 Anodic Coatings For Aluminum And Aluminum Alloys
Aerospace Historical
2000-07-01
AMSC5541A Chemical Conversion Coatings On Aluminum And Aluminum Alloys
Aerospace Current
2000-07-01
AMSS18732B Steel Bars, Wire, Forging Stock, Forgings, Tubing (431), Special Quality
Aerospace Current
2000-07-01
AMSQQC320 Chromium Plating (Electrodeposited)
Aerospace Historical
2000-07-01
AMS4384H Magnesium Alloy, Sheet And Plate 3.2Th – 0.70Zr Annealed Recrystallized
Aerospace Historical
2000-07-01
AMS4383E Magnesium Alloy, Sheet And Plate 2.0Th – 0.78Mn Solution Heat Treated, Cold Worked, And Precipitation Heat Treated
Aerospace Historical
2000-07-01
AMS4385J Magnesium Alloy, Sheet And Plate 3.2Th – 0.70Zr Cold Rolled And Partially Annealed
Aerospace Historical
2000-07-01
AMS4184E Filler Metal, Aluminum Brazing 10Si – 4.0Cu (4145)
Aerospace Historical
2000-07-01
AMS5676E Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 80Ni – 20Cr
Aerospace Historical
2000-07-01
AMS5547G Steel, Corrosion And Heat Resistant, Sheet And Strip 15.5Cr – 4.5Ni – 2.9Mo – 0.10N Solution Heat Treated
Aerospace Historical
2000-07-01
AMS5932A Steel, Corrosion And Heat Resistant, Bars, Forgings And Tubing 14.5Cr – 2.3Ni – 12.5Co – 4.0Mo – 0.60V – 0.03Cb Premium Aircraft-Quality, Carburizing Double Vacuum Melted
Aerospace Historical
2000-07-01
AMS6374B Steel Tubing, Seam-Free, Round 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) 95.0 Ksi (655 MPa) Tensile Strength
Aerospace Historical
2000-07-01
AMS7726F Iron-Nickel-Cobalt Alloy, Wire 53Fe – 29Ni – 17Co Low Expansion, Glass Sealing, Annealed
Aerospace Historical
2000-07-01
AMSM45202 Magnesium Alloys, Anodic Treatment Of
Aerospace Historical
2000-07-01
AMS4211 Aluminum Alloy, Plate 6.2Zn – 1.9Cu – 2.1Mg – 0.10Zr (7040-T7451) Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
2000-07-01
AMS4254A Aluminum Alloy, Aramid Fiber Reinforced, Laminated Sheet 4.4Cu – 1.5Mg – 0.6Mn (2024-T3) 3, 5, 7, Or 9 Ply
Aerospace Historical
2000-07-01
AMS4258 Laminated Sheet, Aluminum Alloy, Aramid Fiber Reinforced 5.7Zn – 2.2Mg – 1.6Cu – 0.22Cr (Alclad, One Side 7475-T761) 5 Or 7 Ply
Aerospace Historical
2000-07-01
AMS2525B Graphite Coating, Thin Lubricating Film Impingement Applied
Aerospace Historical
2000-07-01
AMS3025B Polyalkylene Glycol Heat Treat Quenchant
Aerospace Historical
2000-07-01
AMS4964 Titanium Alloy Bars, Wire, Forgings, And Rings 4.5Al-3V-2Fe-2Mo Annealed
Aerospace Historical
2000-07-01
AMS4087G Aluminum Alloy Tubing, Seamless, Drawn (2024-0) Reinstate Composition Annealed
Aerospace Historical
2000-07-01
AMS4063C Aluminum Alloy, Clad One Side Sheet 1.25Mn – 0.12Cu (No. 11-0 Brazing Sheet) Annealed
Aerospace Historical
2000-07-01
AMS5800E Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 54Ni – 19Cr – 11Co – 10Mo – 3.2Ti – 1.5Al – 0.006B
Aerospace Historical
2000-07-01
AMS4037M Aluminum Alloy Sheet And Plate 4.4Cu – 1.5Mg – 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated
Aerospace Historical
2000-07-01
AS39029/57 CONTACTS, ELECTRICAL CONNECTORS, SOCKET CRIMP REMOVABLE (FOR MIL-C-24308, MIL-C-38999 SERIES II, MIL-C-55302/68, /71, /72, /75 AND MIL-C-83733 CONNECTORS)
Aerospace Historical
2000-07-01
AMS5612G Steel, Corrosion And Heat Resistant, Bars, Wire, Forgings, Tubing, And Rings 12Cr Ferrite Controlled, Annealed
Aerospace Historical
2000-07-01
AS116D HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 45° FLARELESS, LIGHTWEIGHT
Aerospace Historical
2000-07-01
AMS2470L Anodic Treatment Of Aluminum Alloys Chrome Acid Process
Aerospace Historical
2000-07-01
AMS4180E Aluminum Wire 99.0Al Minimum (1100-H18)
Aerospace Historical
2000-07-01
AMS5860D STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 12Cr – 8.5Ni – 0.30(Cb + Ta) – 1.1Ti – 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-07-01
AMS4182E ALUMINUM ALLOY, WIRE 5.0Mg – 0.12Mn – 0.12Cr(5056-0) Annealed
Aerospace Historical
2000-07-01
AMS4219C Aluminum Alloy Castings 7.0Si – 0.55Mg – 0.12Ti – 0.06Be (A357.0 T61) Solution And Precipitation Heat Treated
Aerospace Historical
2000-07-01
AS39029/60 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-C-38999 SERIES I, III, AND IV CONNECTORS)
Aerospace Historical
2000-07-01
AMS4045H Aluminum Alloy Sheet And Plate 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution And Precipitation Heat Treated
Aerospace Historical
2000-07-01
AMS5712H Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 53Ni – 19Cr – 11Co – 9.8Mo – 3.2Ti – 1.6Al – 0.006B Vacuum Melted, Solution Heat Treated Precipitation Hardenable
Aerospace Historical
2000-07-01
AMS2472E Anodic Treatment Of Aluminum Alloys Sulfuric Acid Process, Dyed Coating
Aerospace Historical
2000-07-01
AMS2526B Molybdenum Disulfide Coating, Thin Lubricating Film Impingement Applied
Aerospace Historical
2000-07-01
ARP4784 PERFORMANCE AND EVALUATION CRITERIA, SURFACE DEFECTS, REQUIREMENTS FOR
Aerospace Historical
2000-07-01
AMSQQN290 Nickel Plating (Electrodeposited)
Aerospace Historical
2000-07-01
AMS4928P Titanium Alloy Bars, Wire, Forgings, Rings, And Drawn Shapes 6Al – 4V Annealed
Aerospace Historical
2000-07-01
AS1003D TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARELESS TUBE
Aerospace Historical
2000-07-01
AMS2400U Plating, Cadmium
Aerospace Historical
2000-07-01
AMS5662L Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 52.5Ni – 19Cr – 3.0Mo – 5.1Cb – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-07-01
AMSQQP416 Plating, Cadmium (Electrodeposited)
Aerospace Historical
2000-07-01
J2517_200006 Hybrid Iii Family Chest Potentiometer Calibration Procedure
Automotive Historical
2000-06-30
J1684_200006 Test Method For Evaluating The Electrochemical Resistanceof Coolant System Hoses And Materials
Automotive Historical
2000-06-30
J1366_200006 Rating Lift Cranes Operating On Platforms In The Ocean Environment
Automotive Historical
2000-06-29
J1853_200006 Hand Winche–Boat Trailer Type
Commercial Historical
2000-06-28
J2513_200006 Earthmoving Machinery-Coupling Of Attachments To Skid Steer Loaders
Commercial Historical
2000-06-28
J2198_200006 Glossary–Automatic Belt Tensioner
Automotive Historical
2000-06-28
J2023_200006 Operating Precautions For Horizontal Earthboring Machines
Automotive Historical
2000-06-28
J943_200006 Slow-Moving Vehicle Identification Emblem
Commercial Current
2000-06-28
AMS7727D Iron-Nickel-Cobalt Alloy, Bars And Forgings 53Fe – 29Ni – 17Co Low Expansion, Glass Sealing
Aerospace Historical
2000-06-28
J1249_200006 Former SAE Standard And Former SAE Ex-Steels
Automotive Historical
2000-06-28
J1016_200006 Component Nomenclature–Dumpers
Commercial Current
2000-06-28
J869_200006 Component Nomenclature–Construction Two- And Four-Wheel Tractors
Commercial Current
2000-06-28
J870_200006 Component Nomenclature Graders
Commercial Current
2000-06-28
J728_200006 Component Nomenclature–Scrapers
Commercial Current
2000-06-28
J1075_200006 Sound Measurement–Construction Site
Commercial Historical
2000-06-28
J734_200006 Component Nomenclature–Dumper Trailer
Commercial Current
2000-06-28
J403_200006 Chemical Compositions Of SAE Carbon Steels
Automotive Historical
2000-06-28
J404_200006 Chemical Compositions Of SAE Alloy Steels
Automotive Historical
2000-06-28
J2038_200006 Engine Weight, Dimensions, Center Of Gravity, And Moment Of Inertia
Automotive Current
2000-06-23
J1034_200006 Automobile And Light Truck Engine Coolant Concentrate Ethylene Glycol Type
Automotive Current
2000-06-22
ARINC637P1-1 AERONAUTICAL TELECOMMUNICATIONS NETWORK (ATN) IMPLEMENTATION PROVISIONS, PART 1, PROTOCOLS AND SERVICES
Aerospace Current
2000-06-20
J1555_200006 Recommended Practice For Optimizing Automobile Damageability
Automotive Historical
2000-06-19
J829_200006 Fuel Tank Filler Cap And Cap Retainer
Automotive Historical
2000-06-16
J2022_200006 Classification, Nomenclature, And Specification Definitions For Horizontal Earthboring Machines
Commercial Historical
2000-06-15
J1404_200006 Service Brake Structural Integrity Requirements–Vehicles Over 4500 Kg (10 000 Lb) GVWR
Automotive Historical
2000-06-08
J1966_200006 Lubricating Oils, Aircraft Piston Engine(Non-Dispersant Mineral Oil)
Aerospace Historical
2000-06-08
J1899_200006 Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant)
Aerospace Historical
2000-06-08
J2115_200006 Brake Performance And Wear Test Code Commercial Vehicle Inertia Dynamometer
Automotive Historical
2000-06-08
J1114_200006 Fuel Tank Filler Cap And Cap Retainer Threaded
Automotive Historical
2000-06-06
J1715_200006 Electric Vehicle Terminology
Automotive Historical
2000-06-02
AIR1375C Minimum Safety Requirements For Special Purpose Airline Ground Support Equipment
Aerospace Historical
2000-06-01
AMS1527B Cleaner For Aircraft Exterior Surfaces Water-Miscible, Foam-On, Pressure-Spraying
Aerospace Historical
2000-06-01
AMS4041P Aluminum Alloy, Alclad Sheet And Plate 4.4Cu – 1.5Mg – 0.60Mn Alclad 2024 And 1-1/2% Alclad 2024, -T3 Flat Sheet; 1-1/2% Alclad 2024-T351 Plate
Aerospace Historical
2000-06-01
AS85049/78 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-06-01
AIR4543A Aerospace Hydraulics And Actuation Lessons Learned
Aerospace Historical
2000-06-01
AS85049/80 CONNECTOR ACCESSORIES, ELECTRICAL, DUMMY CONTACT, SIZES 12 AND 8, CATEGORY 7 (FOR MIL-C-38999 CONNECTORS)
Aerospace Historical
2000-06-01
AS9012 Aerospace First Article Inspection Requirement
Aerospace Historical
2000-06-01
AS39029/21 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-81511 SERIES 4 CONNECTORS)
Aerospace Historical
2000-06-01
AS39029/19 CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-81511 SERIES 3 AND 4 CONNECTORS)
Aerospace Historical
2000-06-01
AS39029/14 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-81511 SERIES 2 CONNECTORS)
Aerospace Historical
2000-06-01
AS39029/13 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-81511 SERIES 1 CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/92 CONNECTOR ACCESSORIES, COMPOSITE, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING, CATEGORY 4C (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/91 CONNECTOR ACCESSORIES, COMPOSITE, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING, CATEGORY 4C (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-06-01
AS39029/27 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-C-38999 SERIES II CONNECTORS)
Aerospace Historical
2000-06-01
AS39029/17 CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-81511 SERIES 3 CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/79 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-06-01
MA5405/1 Splice, Fiber Optic, Aerospace Inter-Connect, Graded Index 100/140/172 Cable Size
Aerospace Historical
2000-06-01
MA5405 Splices, Fiber Optics, For Aerospace Inter-Connection Systems
Aerospace Historical
2000-06-01
AS85049/90 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/88 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/87 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/93 CONNECTOR ACCESSORIES, ELECTRICAL, TERMINATION, SHIELD SPLIT SUPPORT RING, COMPOSITE, NONENVIRONMENTAL, STRAIGHT, CATEGORY 7
Aerospace Historical
2000-06-01
AS22759/80 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, TIN COATED, COPPER CONDUCTOR, 150°C, 600 VOLTS
Aerospace Historical
2000-06-01
AS22759/81 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200°C, 600 VOLTS
Aerospace Historical
2000-06-01
AS22759/85 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED COPPER CONDUCTOR, 150°C, 600-VOLT
Aerospace Historical
2000-06-01
AS22759/82 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260°C, 600 VOLTS
Aerospace Historical
2000-06-01
AS22759/84 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260°C, 600-VOLT
Aerospace Historical
2000-06-01
AS22759/83 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200°C, 600-VOLT
Aerospace Historical
2000-06-01
AS22759/90 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260°C, 600 VOLTS
Aerospace Historical
2000-06-01
AS22759/91 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200°C, 600 VOLTS
Aerospace Historical
2000-06-01
AS22759/88 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150°C, 600 VOLTS
Aerospace Historical
2000-06-01
AS22759/87 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260°C, 600 VOLTS
Aerospace Historical
2000-06-01
AS22759/89 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200°C, 600 VOLTS
Aerospace Historical
2000-06-01
AS85049/86 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/89 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/83 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD, BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3 AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/84 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3 AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/85 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-06-01
AS85049/82 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3 AND MIL-C-83723 SERIES III CONNECTORS)
Aerospace Historical
2000-06-01
AS22759/92 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260°C, 600 VOLTS
Aerospace Historical
2000-06-01
AMS5747C Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 72Ni – 15.5Cr – 0.95Cb – 2.5Ti – 0.70Al – 7.0Fe Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-06-01
J2227_200006 International Tests And Specifications For Automotive Engine Oils
Automotive Historical
2000-06-01
MAM5822A Steel, Corrosion And Heat Resistant, Welding Wire 11.8Cr – 2.8Ni – 1.6Co – 1.8Mo – 0.32V Vacuum Induction Melted
Aerospace Historical
2000-06-01
AGS2105-6 AGS2105 ‘Pip’ Pins, Push-Pull
Aerospace Historical
2000-06-01
AMS1530B Cleaner For Aircraft Exterior Surfaces Wipe-On, Wipe-Off
Aerospace Historical
2000-06-01
AMS1531B CLEANER FOR AIRCRAFT EXTERIOR SURFACES Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
Aerospace Historical
2000-06-01
AMS1532B CLEANER FOR AIRCRAFT EXTERIOR SURFACES Wipe-On, Wipe-Off, Emulsion-Type
Aerospace Historical
2000-06-01
AMS1526B Cleaner For Aircraft Exterior Surfaces Water-Miscible, Pressure-Spraying Type
Aerospace Historical
2000-06-01
AMS1528B CLEANER FOR AIRCRAFT EXTERIOR SURFACES Emulsion, Pressure-Spraying Type
Aerospace Historical
2000-06-01
AMS1529B CLEANER FOR AIRCRAFT EXTERIOR SURFACES Emulsion, Foam-On, Pressure-Spraying Type
Aerospace Historical
2000-06-01
AMS1626B Desmutter, Aluminum Liquid
Aerospace Historical
2000-06-01
AMS1625B Desmutter, Aluminum Powdered
Aerospace Historical
2000-06-01
AMS1640B Corrosion Removing Compound For Aircraft Surfaces
Aerospace Historical
2000-06-01
AMS4100C Aluminum Alloy, Alclad, Sheet 5.7Zn – 2.2Mg – 1.6Cu – 0.22Cr (Alclad 7475-T761) Solution And Precipitation Heat Treated
Aerospace Historical
2000-06-01
AMS5695G Steel, Corrosion And Heat Resistant, Covered Welding Electrodes 25cr 20ni
Aerospace Current
2000-06-01
AMS7728G Iron-Nickel-Cobalt Alloy, Sheet, Strip, And Plate 53Fe – 29Ni – 17Co Low Expansion Glass Sealing, Annealed
Aerospace Historical
2000-06-01
AMS4036J Aluminum Alloy Sheet And Plate, Alclad One Side 4.4Cu – 1.5Mg – 0.60Mn Alclad One Side 2024 And 1-1/2% Alclad One Side 2024-T3 Sheet; 1-1/2% Alclad One Side 2024-T351 Plate
Aerospace Historical
2000-06-01
AMSI23053/2 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE, CROSSLINKED AND NON-CROSSLINKED
Aerospace Historical
2000-06-01
AMSI23053/3 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID, CROSSLINKED AND NON-CROSSLINKED
Aerospace Historical
2000-06-01
AMS5838D Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 65Ni – 16Cr – 15Mo – 0.30Al – 0.06La
Aerospace Historical
2000-06-01
AMS5822C Steel, Corrosion And Heat Resistant, Welding Wire 11.8Cr – 2.8Ni – 1.6Co – 1.8Mo – 0.32V Vacuum Induction Melted
Aerospace Historical
2000-06-01
AMS5872D Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 48Ni – 20Cr – 20Co – 5.9Mo – 2.2Ti – 0.45Al Consumable Electrode Or Vacuum Induction Melted Solution Heat Treated
Aerospace Historical
2000-06-01
AS22759/86 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200°C, 600 VOLTS
Aerospace Historical
2000-06-01
AMS5692C Steel, Corrosion And Heat Resistant, Welding Wire 19Cr – 12.5Ni – 2.5Mo
Aerospace Historical
2000-06-01
AMS4016K Aluminum Alloy, Sheet And Plate 2.5Mg – 0.25Cr (5052-H32) Strain Hardened, Quarter-Hard, And Stabilized
Aerospace Historical
2000-06-01
AS4139 TEE, SWIVEL ON RUN, REDUCED BODY, FLARELESS
Aerospace Historical
2000-06-01
AMS4015K Aluminum Alloy, Sheet And Plate 2.5Mg – 0.25Cr (5052-0) Annealed
Aerospace Historical
2000-06-01
AMS6360K Steel Tubing, Seamless 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) Normalized Or Stress Relieved
Aerospace Historical
2000-06-01
AMS5516M Steel, Corrosion Resistant, Sheet, Strip, And Plate 18Cr – 9.0Ni (SAE 30302) Solution Heat Treated
Aerospace Historical
2000-06-01
AMS2759C Heat Treatment Of Steel Parts General Requirements
Aerospace Historical
2000-06-01
J1739_200006 Potential Failure Mode And Effects Analysis In Design (Design FMEA) And Potential Failure Mode And Effects Analysis In Manufacturing And Assembly Processes (Process FMEA) Reference Manual
Automotive Historical
2000-06-01
AMS4500H Copper, Sheet, Strip, And Plate Soft Annealed
Aerospace Historical
2000-06-01
AMS4050G Aluminum Alloy, Plate 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
2000-06-01
AMS5512K Steel, Corrosion And Heat Resistant, Sheet, Strip, And Plate 18Cr – 10.5Ni – 0.80Cb (SAE 30347) Solution Heat Treated
Aerospace Historical
2000-06-01
AS4099A ADAPTER, ASSEMBLY – PORT CONNECTION RING LOCKED TO FLARELESS TUBE END
Aerospace Historical
2000-06-01
J743_200006 Lift Capacity Calculation And Test Procedure-Pipelayer And Sideboom
Commercial Historical
2000-06-01
J2028_200005 Front-Wheel-Drive Constant Velocity Joint Boot Seals
Automotive Historical
2000-05-17
J156_200005 Fusible Links
Automotive Historical
2000-05-17
J1127_200005 Battery Cable
Automotive Historical
2000-05-17
J1128_200005 Low Tension Primary Cable
Automotive Historical
2000-05-17
J1654_200005 High Voltage Primary Cable
Automotive Historical
2000-05-17
J646_200005 Planetary Gear(S)–Terminology
Automotive Historical
2000-05-16
J649_200005 Automatic Transmission Functions–Terminology
Automotive Historical
2000-05-16
J643_200005 Hydrodynamic Drive Test Code
Automotive Historical
2000-05-16
J1087_200005 One-Way Clutches–Nomenclature And Terminology
Automotive Historical
2000-05-16
J57_200005 Sound Level Of Highway Truck Tires
Automotive Historical
2000-05-03
J1060_200005 Subjective Rating Scale For Evaluation Of Noise And Ride Comfort Characteristics Related To Motor Vehicle Tires
Automotive Historical
2000-05-03
J972_200005 Moving Rigid Barrier Collision Tests
Automotive Historical
2000-05-03
J1096_200005 Measurement Of Exterior Sound Levels For Heavy Trucks Under Stationary Conditions
Automotive Historical
2000-05-03
J1477_200005 Measurement Of Interior Sound Levels Of Light Vehicles
Automotive Current
2000-05-03
J1113/41_200005 Limits And Methods Of Measurement Of Radio Disturbance Characteristics Of Components And Modules For The Protection Of Receivers Used On-Board Vehicles
Automotive Historical
2000-05-02
J2184_200005 Vehicle Lift Points For Service Garage Lifting
Automotive Historical
2000-05-02
J1801_200005 Brake Effectiveness Marking For Brake Blocks
Automotive Historical
2000-05-02
J551/4_200005 Test Limits And Methods Of Measurement Of Radio Disturbance Characteristics Of Vehicles And Devices, Broadband And Narrowband, 150 KHz To 1000 MHz
Automotive Historical
2000-05-02
MAM5598B Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 72Ni – 15.5Cr – 0.95 (Cb + Ta) – 2.5Ti – 0.70Al – 7.0Fe Consumable Electrode Or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-05-01
USCAR3A Standard For Testing Automotive Miniature Bulbs
Automotive Historical
2000-05-01
AS85049/38 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NONSELF-LOCKING, CATEGORY 4C (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/57 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45°, SELF-LOCKING AND NONSELF-LOCKING, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/46 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, NONMETALLIC, CATEGORY 4C (FOR MIL-C-27599 SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/47 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING AND NONSELF-LOCKING, CATEGORY 4B (FOR MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/33 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELDED TERMINATION, CATEGORY 3C (FOR MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/77 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/45 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, NONMETALLIC, CATEGORY 4C (FOR MIL-C-27599 SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/32 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90°, SHIELDED TERMINATION, CATEGORY 3C (FOR MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/36 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3B (FOR MIL-C-27599 SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/58 CONNECTOR ACCESSORIES, ELECTRICAL, RING, POTTING BOOT, CATEGORY 5 (MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/61 CONNECTOR ACCESSORIES, ELECTRICAL, RING, POTTING BOOT, CATEGORY 5 (FOR MIL-C-27599 CONNECTORS)
Aerospace Historical
2000-05-01
ARP1048A Instrument And Cockpit Illumination For General Aviation Aircraft
Aerospace Historical
2000-05-01
ARP1554B Auto Transport Unit Load Device
Aerospace Historical
2000-05-01
AS85049/39 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING AND NONSELF-LOCKING, CATEGORY 4C (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/49 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NONSELF-LOCKING, CATEGORY 4B (MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/76 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/69 CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINKBOOT, CATEGORY 5 (MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/50 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, CATEGORY 4C (FOR MIL-C-24308 CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/63 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING AND NONSELF-LOCKING, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-05-01
AS85049/48 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-C-24308 CONNECTORS)
Aerospace Historical
2000-05-01
J1489_200005 Heavy Truck And Bus Retarder Downhill Performance Mapping Procedure
Automotive Current
2000-05-01
J2494_200005 Push-To-Connect Tube Fittings For Use In The Piping Of Vehicular Air Brake
Commercial Current
2000-05-01
ESC77-4 ESC77 Backshell, Assembly, 45°, RFI / EMI Cone Grounding, 100% Anti-Decoupling
Aerospace Current
2000-05-01
ESC75-3 ESC75 Backshell, Assembly, Straight, RFI / EMI Cone Grounding, 100% Anti-Decoupling
Aerospace Current
2000-05-01
J1113/24_200005 Immunity To Radiated Electromagnetic Fields; 10 Khz To 200 Mhz–Crawford Tem Cell And 10 Khz To 5 Ghz–Wideband Tem Cell
Automotive Historical
2000-05-01
AGS838-23 AGS838 Ass’y. Of Mk. 1. (Aluminum Alloy) Low Pressure Unions 5/16″ DIA Tubing (Elbow And Straight Union With Drain Tube)
Aerospace Current
2000-05-01
AMS3057 Lubricant, Semi-Fluid, For Aircraft Gearboxes
Aerospace Historical
2000-05-01
AMS4396D Magnesium Alloy Welding Wire 3.2 Rare Earths – 2.5Zn – 0.72Zr (EZ33A)
Aerospace Historical
2000-05-01
MAM5599B Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 62Ni – 21.5Cr – 9.0Mo – 3.7 (Cb+Ta) Annealed
Aerospace Historical
2000-05-01
AMS6250J Steel Bars, Forgings, And Tubing 1.5Cr – 3.5Ni (0.07 – 0.13 C) (SAE 3310)
Aerospace Historical
2000-05-01
AMS2434B Plating, Tin-Zinc Alloy
Aerospace Historical
2000-05-01
AMS3415C Flux, Aluminum Dip Brazing 1030 °F (554 °C) Or Lower Liquidus
Aerospace Historical
2000-05-01
AMS4122J Aluminum Alloy Bars, Rods, And Wire Rolled Or Cold Finished, And Rings 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (7075-T6) Solution And Precipitation Heat Treated
Aerospace Historical
2000-05-01
AMS5680H Steel, Corrosion And Heat Resistant, Welding Wire 18.5Cr – 11Ni – 0.40Cb (SAE 30347)
Aerospace Historical
2000-05-01
AMS5598D Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 72Ni – 15.5Cr – 0.95 (Cb + Ta) – 2.5Ti – 0.70Al – 7.0Fe Consumable Electrode Or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
2000-05-01
AMS6322L Steel Bars, Forgings, And Rings 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740)
Aerospace Historical
2000-05-01
AMS2644A Inspection Material, Penetrant
Aerospace Historical
2000-05-01
AMS5829D Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 56Ni – 19.5Cr – 16.5Co – 2.5Ti – 1.5Al Vacuum Induction Melted
Aerospace Historical
2000-05-01
AMS3644D Polyimide, Molded Rod, Bar, And Tube, Plaque, And Formed Parts
Aerospace Historical
2000-05-01
AMS5801E Cobalt Alloy, Corrosion And Heat Resistant, Welding Wire 39Co – 22Cr – 22Ni – 14.5W – 0.07La
Aerospace Historical
2000-05-01
AMS5599F Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, And Plate 62Ni – 21.5Cr – 9.0Mo – 3.7 (Cb+Ta) Annealed
Aerospace Historical
2000-05-01
J1945_200004 Cross-Tooth Companion Flanges, Type T
Automotive Historical
2000-04-28
J2487_200004 SAE No. 2 Friction Test Machine 3600 R/Min Stepped Power Test
Automotive Historical
2000-04-26
J2489_200004 SAE No. 2 Friction Test Machine Durability Test
Automotive Historical
2000-04-26
J2488_200004 SAE No.2 Friction Test Machine 6000 R/Min Stepped Power Test
Automotive Historical
2000-04-26
J1134_200004 SAE Nodal Mount
Commercial Historical
2000-04-26
J876_200004 Wide Base Disc Wheels And Demountable Rims
Automotive Historical
2000-04-26
J2490_200004 SAE No. 2 Friction Test Machine ΜPVT Test
Automotive Historical
2000-04-26
J971_200004 Brake Power Rating Test Code–Commercial Vehicle Inertia Dynamometer
Commercial Historical
2000-04-20
J2373_200004 Stakeholder’s Workshop Information Report
Automotive Current
2000-04-15
J1618_200004 Continuously Variable Transmission Test Code For Passenger Cars
Automotive Historical
2000-04-12
J1939_200004 Recommended Practice For A Serial Control And Communications Vehicle Network
Commercial Historical
2000-04-10
J401_200004 Selection And Use Of Steels
Automotive Historical
2000-04-10
ARINC662 STRATEGIES TO ADDRESS ELECTRONIC COMPONENT OBSOLESCENCE IN COMMERCIAL AIRCRAFT
Aerospace Current
2000-04-07
J1140_200004 Filler Pipes And Openings Of Motor Vehicle Fuel Tanks
Automotive Historical
2000-04-04
AS85049/27 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SELF-LOCKING AND NONSELF-LOCKING, CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-04-01
AS85049/18 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, RFI/EMI, CATEGORY 2B (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-04-01
AS85049/19 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, RFI/EMI, CATEGORY 3B (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-04-01
AS5452 Night Vision Goggles (NVG) Compatible Lighting For Civil Aircraft
Aerospace Historical
2000-04-01
AS62A Carburetor Flange, Aircraft, 2 Bolt – Single Barrel – No. 3 And 4
Aerospace Current
2000-04-01
AS85049/29 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3B (FOR MIL-C-27599 SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-04-01
AS85049/4 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, STEP-UP, CATEGORY 1A (FOR MIL-C-22992 CONNECTORS, CLASSES C, J, AND R)
Aerospace Historical
2000-04-01
AS85049/5 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, STEP-DOWN, CATEGORY 1A (FOR MIL-C-22992 CONNECTORS, CLASSES C, J, AND R)
Aerospace Historical
2000-04-01
AS85049/14 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, CATEGORY 3B (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-04-01
AS85049/15 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45°, SELF-LOCKING, CATEGORY 4C (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-04-01
AS85049/20 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, RFI/EMI CATEGORY 3B (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-04-01
AS85049/17 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 2B, (FOR MIL-C-27599 SERIES I AND MIL-C-38999 SERIES I AND II CONNECTORS)
Aerospace Historical
2000-04-01
AS85049/21 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-04-01
J1394_200004 Metric Nonmetallic Air Brake System Tubing
Automotive Historical
2000-04-01
AS50881A Wiring Aerospace Vehicle
Aerospace Historical
2000-04-01
AS85049/16 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING, CATEGORY 4C (FOR MIL-C-38999 SERIES III AND IV CONNECTORS)
Aerospace Historical
2000-04-01
J2032_200003 Ignition Cable Assemblies
Automotive Historical
2000-03-31
J2525_200003 SAE Design Guideline: Metal Belt Drive Continuously Variable Ratio (Cvt) Automatic Transmissions
Automotive Historical
2000-03-27
J548/2_200003 Spark Plug Installation Sockets
Automotive Historical
2000-03-27
J2369_200003 Standards For ATIS Message Sets Delivered Over Reduced Bandwidth Media
Automotive Current
2000-03-24
J548/1_200003 Spark Plugs
Automotive Historical
2000-03-24
J2496_200003 Transport Area Network Cabling
Automotive Historical
2000-03-21
J2074_200003 The Air Bag Systems In Your Car “What The Public Needs To Know”
Automotive Historical
2000-03-21
ARINC760-1 GNSS NAVIGATION UNIT (GNU)
Aerospace Current
2000-03-20
J1330_200003 Photometry Laboratory Accuracy Guidelines
Automotive Historical
2000-03-17
J1113/11_200003 Immunity To Conducted Transients On Power Leads
Automotive Historical
2000-03-14
J2321/1_200003 Ship Systems And Equipment–Disposable Hydraulic Filter Element–115 L/Min Flow, 1.000 Mpa Collapse Pressure, Filtration Ratio = 75 At 6 And 10 Gmm
Automotive Historical
2000-03-12
J2321/3_200003 Ship Systems And Equipment–Disposable Hydraulic Filter Elements–21 Mpa Collapse Pressure, Filtration Ratio = 75 At 10 Gmm, 75 To 175 L/Min
Automotive Historical
2000-03-12
J2321_200003 Ship Systems And Equipment–General Specification For Filter Elements–Hydraulic And Lube Oil Service
Automotive Historical
2000-03-12
J2321/2_200003 Ship Systems And Equipment–Disposable Hydraulic Filter Element–190 L/Min Flow, 21 Mpa Collapse Pressure, Filtration Ratio = 75 At 7 Gmm
Automotive Historical
2000-03-12
J640_200003 Symbols For Hydrodynamic Drives
Automotive Historical
2000-03-10
J641_200003 Hydrodynamic Drives Terminology
Automotive Historical
2000-03-10
J1432_200003 High-Mounted Stop Lamps For Use On Vehicles 2032 Mm Or More In Overall Width
Commercial Historical
2000-03-08
J1574/1_200003 Measurement Of Vehicle And Suspension Parameters For Directional Control Studies
Automotive Historical
2000-03-08
J1574/2_200003 Measurement Of Vehicle And Suspension Parameters For Directional Control Studies–Rationale
Automotive Historical
2000-03-08
J1957_200003 Center High Mounted Stop Lamp Standard For Vehicles Less Than 2032 Mm Overall Width
Automotive Historical
2000-03-08
J585_200003 Tail Lamps (Rear Position Lamps) For Use On Motor Vehicles Less Than 2032 Mm In Overall Width
Automotive Historical
2000-03-08
J593_200003 Backup Lamps (Reversing Lamps)
Automotive Historical
2000-03-08
J586_200003 Stop Lamps For Use On Motor Vehicles Less Than 2032 Mm In Overall Width
Automotive Historical
2000-03-08
J588_200003 Turn Signal Lamps For Use On Motor Vehicles Less Than 2032 Mm In Overall Width
Automotive Historical
2000-03-08
J914_200003 Side Turn Signal Lamps For Vehicles Less Than 12 M In Length
Automotive Historical
2000-03-08
J2042_200003 Clearance, Sidemarker, And Identification Lamps For Use On Motor Vehicles 2032 Mm Or More In Overall Width
Automotive Historical
2000-03-08
AS6039B Bearings, Ball, Rod End, Double Row, Self-Aligning
Aerospace Historical
2000-03-01
J2261_200003 Stop Lamps And Front- And Rear-Turn Signal Lamps For Use On Motor Vehicles 2032 Mm Or More In Overall Width
Multiple Historical
2000-03-01
AIR5005 Aerospace – Commercial Aircraft Hydraulic Systems
Aerospace Historical
2000-03-01
AIR5359 Requirements For Registration Of Quality Systems To AS9000 Or AS9100
Aerospace Historical
2000-03-01
ARP767B Impact Protective Design Of Occupant Environment Transport Aircraft
Aerospace Historical
2000-03-01
ARP4171 Safety Considerations Of Food And Beverage Service Carts
Aerospace Historical
2000-03-01
ARP496C Stowage Of Cabin Emergency Flotation Equipment
Aerospace Historical
2000-03-01
ARP4387A Accommodations For Passengers With Ambulatory Disabilities In Transport Category Aircraft Cabins With Seating Capacities Greater Than 44
Aerospace Historical
2000-03-01
AS90376 CAP, DUST, PLASTIC, ELECTRIC CONNECTOR
Aerospace Historical
2000-03-01
AS1046B Minimum Standard For Portable Gaseous, Oxygen Equipment
Aerospace Historical
2000-03-01
AS25439 SPLICE-PERMANENT CRIMP STYLE, 2 WAY TYPE FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
Aerospace Historical
2000-03-01
AS27429 SPLICE, CONDUCTOR, DISCONNECT, CRIMP STYLE, COPPER, INSULATED BARREL, TYPE II, CLASS 1 FOR 105°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
2000-03-01
AS25436 TERMINAL-LUG, CRIMP STYLE, 90° UPRIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
Aerospace Historical
2000-03-01
AS25435 TERMINAL-LUG, CRIMP STYLE, STRAIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
Aerospace Historical
2000-03-01
AIR1335A Ramp De-Icing
Aerospace Historical
2000-03-01
AS4073 Air Cycle Air Conditioning Systems For Military Air Vehicles
Aerospace Historical
2000-03-01
J1782_200003 Ship Systems And Equipment Hydraulic Systems Noise Control
Automotive Historical
2000-03-01
AS2558-3 AS2558 Seal – Press Button
Aerospace Current
2000-03-01
AMS2980 TECHNICAL SPECIFICATION: CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL PART 0 – INTRODUCTION
Aerospace Historical
2000-03-01
AMS6361D Steel Tubing, Seamless 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-03-01
AS81587 Timer Assembly Rain Repellent
Aerospace Current
2000-03-01
AS8581 Engine; Rocket, Solid Propellant 5 Second Duration, 4500 Pounds Thrust
Aerospace Current
2000-03-01
AMS6429E Steel Bars, Forgings, Tubing, And Rings 0.78Cr – 1.8Ni – 0.35Mo – 0.20V (0.33 – 0.38C) Consumable Electrode Vacuum Melted
Aerospace Historical
2000-03-01
AGS2081-11 AGS2081 Pipe Clip For 3/16″ DIA. Fixing, Rubber Covered, With Earthing Tongue
Aerospace Current
2000-03-01
AMS5788E Cobalt Alloy, Corrosion And Heat Resistant, Hard Facing Rods And Wire 62Co – 29Cr – 4.5W – 1.2C
Aerospace Historical
2000-03-01
AMS5796D Cobalt Alloy, Corrosion And Heat Resistant, Welding Wire 52Co – 20Cr – 10Ni – 15W
Aerospace Historical
2000-03-01
ARP488D Exits And Their Operation – Air Transport Cabin Emergency
Aerospace Historical
2000-03-01
J222_200003 Parking Lamps (Front Position Lamps)
Automotive Historical
2000-03-01
AMS5517K Steel, Corrosion Resistant, Sheet And Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
2000-03-01
AMS2401E Plating, Cadmium Low Hydrogen Content Deposit
Aerospace Historical
2000-03-01
AMS5719C Steel Bars, Wire, Forgings, Tubing, Rings, And Extrusions, Corrosion Resistant 11.8Cr – 2.5Ni – 1.8Mo – 0.33V (0.08 – 0.15C) Annealed, Vacuum Arc Or Electroslag Remelted
Aerospace Historical
2000-03-01
AIR5689 Light Transmitting Glass Covers For Exterior Aircraft Lighting
Aerospace Historical
2000-03-01
AMS6411E Steel Bars, Forgings, And Tubing 0.88Cr – 1.8Ni – 0.42Mo – 0.08V (0.28 – 0.33C) Consumable Electrode Remelted
Aerospace Historical
2000-03-01
AMS2700 Passivation Of Corrosion Resistant Steels
Aerospace Historical
2000-03-01
AMS2482B Hard Coating Treatment Of Aluminum Alloys Teflon-Impregnated Or Codeposited
Aerospace Historical
2000-03-01
AMS5666E Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, Extrusions, And Rings 62Ni – 21.5Cr – 9.0Mo – 3.65 (Cb+Ta) Annealed
Aerospace Historical
2000-03-01
AS8043A Restraint Systems For Civil Aircraft
Aerospace Historical
2000-03-01
J2056/3_200002 Selection Of Transmission Media
Automotive Current
2000-02-23
J311_200002 Fluid For Passenger Car Type Automatic Transmissions
Automotive Current
2000-02-22
J246_200002 Spherical And Flanged Sleeve (Compression) Tube Fittings
Automotive Historical
2000-02-22
J2056/2_200002 Survey Of Known Protocols
Automotive Current
2000-02-17
J2056/1_200002 Class C Application Requirement Considerations
Automotive Current
2000-02-17
J10_200002 Automotive And Off-Highway Air Brake Reservoir Performance And Identification Requirements
Automotive Historical
2000-02-16
J2411_200002 Single Wire CAN Network For Vehicle Applications
Automotive Current
2000-02-14
J1164_200002 Labeling Of ROPS And FOPS And OPS
Commercial Current
2000-02-08
J1207_200002 Measurement Procedure For Determination Of Silencer Effectiveness In Reducing Engine Intake Or Exhaust Sound Level
Automotive Historical
2000-02-07
J742_200002 Capacity Rating–Loader Bucket
Commercial Current
2000-02-07
J1026_200002 Braking Performance–Crawler Tractors And Crawler Loaders
Commercial Current
2000-02-07
J1074_200002 Engine Sound Level Measurement Procedure
Automotive Historical
2000-02-07
J1862_200002 Fuel Injection System Fuel Pressure Regulator And Pressure Damper
Automotive Historical
2000-02-05
AMS6299D Steel Bars, Forgings, And Tubing 0.50Cr – 1.8Ni – 0.25Mo (0.17 – 0.23C) (SAE 4320H)
Aerospace Historical
2000-02-01
AMS5560J Steel, Corrosion Resistant, Seamless Tubing 19Cr – 10Ni (SAE 30304) Solution Heat Treated
Aerospace Historical
2000-02-01
MS1004_200002 Lubricants, Industrial Oils, And Related Products Type H (Hydraulic Fluids)–Specification
Automotive Historical
2000-02-01
AMS3262 Sealing Compound, Silicone Rubber, Two-Part, Electrically Conductive And Corrosion Resistant (Nonchromated) For Use From -67 To 500 °F (-55 To 260 °C)
Aerospace Historical
2000-02-01
AMS5398E Steel, Corrosion Resistant, Sand And Centrifugal Castings 16Cr – 4.1Ni – 0.22(Cb + Ta) – 2.8Cu Solution Heat Treated
Aerospace Historical
2000-02-01
AMS5714C Alloy Bars, Forgings, And Rings, Corrosion And Heat Resistant 73Ni – 15.5Cr – 2.5Ti – 0.70Al – 7.0Fe Precipitation Hardenable
Aerospace Historical
2000-02-01
AMS3352A Silicone Rubber, Fiberglass Fabric Reinforced
Aerospace Historical
2000-02-01
AMS6491B Steel Bars, Forgings, And Tubing 4.1Cr – 4.2Mo – 1.0V (0.80 – 0.85C) Premium Aircraft-Quality For Bearing Applications, Double Vacuum Melted
Aerospace Historical
2000-02-01
AMS5576J Steel, Corrosion And Heat Resistant, Welded Tubing 18Cr – 10.5Ni – 0.40Ti (SAE 30321) Solution Heat Treated
Aerospace Historical
2000-02-01
AMS7725C Tungsten Alloy Shapes, Sintered, High Density
Aerospace Historical
2000-02-01
AMS4029J Aluminum Alloy Sheet And Plate (2014; -T6 Sheet, -T651 Plate) Solution And Precipitation Heat Treated
Aerospace Historical
2000-02-01
AMS4078F Aluminum Alloy Plate (7075-T7351) Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
2000-02-01
AMS5548M Steel, Corrosion And Heat Resistant, Sheet And Strip 16.5Cr – 4.5Ni – 2.9Mo – 0.10N 1850 To 1975 °F (1010 To 1079 °C) Annealed
Aerospace Historical
2000-02-01
AMS5570N Steel, Corrosion And Heat Resistant, Seamless Tubing 18Cr – 11Ni – 0.40Ti (SAE 30321) Solution Heat Treated
Aerospace Historical
2000-02-01
J774_200001 Emergency Warning Device And Emergency Warning Device Protective Container
Automotive Historical
2000-01-28
J2475_200001 Wheel End Assembly And Axle Spindle Interface Dimensions–Truck And Bus
Automotive Historical
2000-01-24
J997_200001 Spark Arrester Test Carbon
Automotive Historical
2000-01-24
J331_200001 Sound Levels For Motorcycles
Commercial Historical
2000-01-24
J109_200001 Service Brake System Performance Requirements–Motorcycles And Motor-Driven Cycles
Commercial Historical
2000-01-24
J108_200001 Brake System Road Test Code–Motorcycles
Commercial Historical
2000-01-24
J1834_200001 Seat Belt Comfort, Fit, And Convenience
Automotive Historical
2000-01-20
J310_200001 Automotive Lubricating GreasesHS-23/00
Automotive Historical
2000-01-20
J258_200001 Circuit Breaker–Internal Mounted–Automatic Reset
Commercial Current
2000-01-19
J2432_200001 Performance Testing Of Pk Section V-Ribbed Belts
Automotive Historical
2000-01-18
J1451_200001 A Dictionary Of Terms For The Dynamics And Handling Of Single Track Vehicles (Motorcycles, Mopeds, And Bicycles)
Commercial Historical
2000-01-13
J1681_200001 Gasoline, Alcohol, And Diesel Fuel Surrogates For Materials Testing
Automotive Current
2000-01-10
AS5173 FITTING, BUSHING, PORT, REDUCER
Aerospace Historical
2000-01-01
J2357_200001 Application Guidelines For Electronically Driven And/Or Controlled Exterior Automotive Lighting Equipment
Automotive Historical
2000-01-01
AMS3237F Butyl (IIR) Rubber Phosphate Ester Resistant 35 – 45
Aerospace Historical
2000-01-01
ARP1840A Aircraft Engine Transport Devices
Aerospace Historical
2000-01-01
ARP1200A Involute Splines; Wear Limit, Definition Of
Aerospace Current
2000-01-01
AS5182 FITTING, ELBOW, 45°, BULKHEAD, FLARED TO HOSE
Aerospace Historical
2000-01-01
ARP4146A Coiled Tubing – Titanium Alloy, Hydraulic Applications, Aerospace
Aerospace Historical
2000-01-01
AS5172 FITTING, ADAPTER, PORT, REDUCER
Aerospace Historical
2000-01-01
AS5194A FITTING, ADAPTER, STRAIGHT PIPE TO FLARED
Aerospace Historical
2000-01-01
AMSS851B Steel Grit, Shot, And Cut Wire Shot; And Iron Grit And Shot- Blast Cleaning And Peening
Aerospace Current
2000-01-01
AMS1523A Cleaner For Exterior Aircraft Surfaces Thickened Or Gel-Type, Water-Base
Aerospace Historical
2000-01-01
J526_200001 Welded Low-Carbon Steel Tubing
Automotive Historical
2000-01-01
J1030_199912 Maximum Sound Level For Passenger Cars And Light Trucks
Automotive Historical
1999-12-31
J300_199912 Engine Oil Viscosity ClassificationHS-23/00
Automotive Historical
1999-12-30
J533_199912 Flares For Tubing HS-150/2000
Automotive Historical
1999-12-22
J1058_199912 Standard Sheet Steel Thickness And Tolerances
Automotive Historical
1999-12-21
J1285_199912 Powershift Transmission Fluid Classification
Automotive Current
1999-12-17
J1746_199912 ISP-Vehicle Location Referencing Standard
Automotive Historical
1999-12-15
ARINC656 AVIONICS INTERFACE DEFINITION FOR FLIGHT MANAGEMENT AND COMMUNICATIONS MANAGEMENT FUNCTIONS
Aerospace Current
1999-12-15
J2372_199912 Field Test Analysis Information Report
Automotive Current
1999-12-14
J1562_199912 Selection Of Zinc And Zinc-Alloy (Hot-Dipped And Electrodeposited Coated Steel Sheet
Automotive Historical
1999-12-07
J1598_199912 Laboratory Testing Of Vehicle And Industrial Heat Exchangers For Durability Under Vibration-Induced Loading
Automotive Historical
1999-12-02
AS91111 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 5731, .250-28 UNJF-3A
Aerospace Historical
1999-12-01
AS9587 BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .4375-20 UNJF-3A
Aerospace Historical
1999-12-01
AS9210 BOLT, MACHINE – STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .3125-24 UNJF-3A
Aerospace Historical
1999-12-01
AS9433 BOLT, TEE HEAD – AMS 5735, CHAMFERED, .250-28 UNJF-3A
Aerospace Historical
1999-12-01
AS9514 CUSHION, LOOP CLAMP-MULTIPLE, 3-TUBE, AMS 3677
Multiple Historical
1999-12-01
AS9515 CUSHION, LOOP CLAMP-MULTIPLE, 2-TUBE, AMS 3677
Aerospace Historical
1999-12-01
AS136D HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO STRAIGHT
Aerospace Historical
1999-12-01
AS140D HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 90°
Aerospace Historical
1999-12-01
AS139D HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 45°
Aerospace Historical
1999-12-01
AS138D HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 90°
Aerospace Historical
1999-12-01
AS137D HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 45°
Aerospace Historical
1999-12-01
AS141D HOSE ASSEMBLY, METAL – MEDIUM PRESSURE, FLARELESS, WELDED, 90° TO 90°
Aerospace Historical
1999-12-01
AS9209 BOLT, MACHINE – STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .250-28 UNJF-3A
Aerospace Historical
1999-12-01
AS9218 BOLT, MACHINE – STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .250-28 UNJF-3A
Aerospace Historical
1999-12-01
AS91691 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .190 (NO.10)-32, BLACK OXIDE
Aerospace Historical
1999-12-01
AS91701 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .250-28, BLACK OXIDE
Aerospace Historical
1999-12-01
AS91711 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .3125-24, BLACK OXIDE
Aerospace Historical
1999-12-01
AS91721 BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .375-24, BLACK OXIDE
Aerospace Historical
1999-12-01
AS9212 BOLT, MACHINE – STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .4375-20 UNJF-3A
Aerospace Historical
1999-12-01
AS9376 GASKET-METAL O-RING, .125 TUBE X .010 WALL, SILVER PLATED
Aerospace Historical
1999-12-01
AS9356 NUT, PLAIN, HEXAGON -A-286
Aerospace Historical
1999-12-01
AS9371 GASKET-METAL O-RING, .035 TUBE X .006 WALL, SILVER PLATED
Aerospace Historical
1999-12-01
AS9372 GASKET-METAL O-RING, .062 TUBE X .006 WALL, SILVER PLATED
Aerospace Historical
1999-12-01
AS9375 GASKET-METAL O-RING, .094 TUBE X .010 WALL, SILVER PLATED
Aerospace Historical
1999-12-01
AS91641 PIN, STRAIGHT, HEADLESS, STEEL, OVERSIZE
Aerospace Historical
1999-12-01
AIR1362A Aerospace Hydraulic Fluids Physical Properties
Aerospace Historical
1999-12-01
AS21441A BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL HEAVY STUD, TYPE IX, ANTIFRICTION, INCH
Aerospace Historical
1999-12-01
AS9362 NUT, PLAIN, HEXAGON, CHECK – A-286, SILVER PLATED, MIL-S-8879
Aerospace Historical
1999-12-01
AS91601 BOLT, MACHINE-STEEL, 12 POINT HEAD .375-24, BLACK OXIDE
Aerospace Historical
1999-12-01
AS9575 BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, .250-28 UNJF-3A
Aerospace Historical
1999-12-01
AS9489 BOLT, MACHINE – HEXAGON HEAD, FULL SHANK AMS 5731, .190-32 UNJF-3A
Aerospace Historical
1999-12-01
AS24461B BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH
Aerospace Historical
1999-12-01
AMS3970 Carbon Fiber Fabric Repair Prepreg, 125 °C (250 °F) Vacuum Curing Part 0 – Introduction
Aerospace Historical
1999-12-01
AMS3970/1 Carbon Fiber Fabric Repair Prepreg, 125 °C (250 °F) Vacuum Curing Part 1 – General Requirements
Aerospace Historical
1999-12-01
AMS3970/2 Carbon Fiber Fabric Repair Prepreg, 125 °C (250 °F) Vacuum Curing Part 2 – Qualification Program For Fiber, Fabric, Resin And Film Adhesive
Aerospace Historical
1999-12-01
AMS3970/3 Carbon Fiber Fabric Repair Prepreg, 125 °C (250 °F) Vacuum Curing Part 3 – Purchasing Specification For Epoxy Prepreg
Aerospace Historical
1999-12-01
AMS3970/4 Carbon Fiber Fabric Repair Prepreg, 125 °C (250 °F) Vacuum Curing Part 4 – Purchasing Specification For Film Adhesive
Aerospace Historical
1999-12-01
AS123451 RIVET, SOLID, 100° FLUSH HEAD, AMS 7229
Aerospace Historical
1999-12-01
AS126587 STUD – STRAIGHT, .375-16 X .375-24
Aerospace Historical
1999-12-01
AS91101 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 5731, .190-32 UNJF-3A
Aerospace Historical
1999-12-01
ARP5414 Aircraft Lightning Zoning
Aerospace Historical
1999-12-01
AS5420 Hose Assembly, Heated, 125 Psig, Lined Silicone, Potable Water, Procurement Specification
Aerospace Historical
1999-12-01
ARP1838A Pictograms For Ground Support Equipment
Aerospace Historical
1999-12-01
J1806_199911 Clutch Dimensions For Truck And Bus Applications
Commercial Historical
1999-11-30
J2016_199911 Chemical Stress Resistance Of Polymers
Automotive Historical
1999-11-29
J1241_199911 Fuel And Lubricant Tanks For Motorcycles
Commercial Current
1999-11-29
J2354_199911 Message Sets For Advanced Traveler Information System (Atis)
Automotive Historical
1999-11-27
J4001_199911 Implementation Of Lean Operation User Manual
Automotive Historical
1999-11-22
J712_199911 Industrial And Agricultural Disc Wheels
Commercial Historical
1999-11-22
J283_199911 Test Procedure For Measuring Hydraulic Lift Capacity On Agricultural Tractors Equipped With Three-Point Hitch
Automotive Historical
1999-11-22
J1194_199911 Rollover Protective Structures (ROPS) For Wheeled Agricultural Tractors
Commercial Historical
1999-11-22
J1709_199911 European Brake Fluid Technology
Automotive Historical
1999-11-15
J139_199911 Ignition System Nomenclature And Terminology
Automotive Historical
1999-11-15
J973_199911 Ignition System Measurements Procedure
Automotive Historical
1999-11-15
ARINC708A-3 AIRBORNE WEATHER RADAR WITH FORWARD LOOKING WINDSHEAR DETECTION CAPABILITY
Aerospace Current
1999-11-15
J75_199911 Motor Vehicle Brake Fluid Container Compatibility
Automotive Historical
1999-11-15
J549_199911 Preignition Rating Of Spark Plugs
Automotive Historical
1999-11-15
AMS4632D Aluminum Bronze Bars And Rods 90Cu – 8.5Al Hard
Aerospace Historical
1999-11-13
J814_199911 Engine Coolants
Automotive Historical
1999-11-10
J100_199911 Class “A” Vehicle Glazing Shade Bands
Automotive Historical
1999-11-08
J2240_199911 Starter Armature Remanufacturing Procedures
Automotive Historical
1999-11-05
J1725_199911 Structural Modification For Personally Licensed Vehicles To Meet The Transportation Needs Of Persons With Disabilities
Automotive Historical
1999-11-05
J2093_199911 Design Considerations For Wheelchair Lifts For Entry To Or Exit From A Personally Licensed Vehicle
Automotive Historical
1999-11-05
J1773_199911 SAE Electric Vehicle Inductively Coupled Charging
Automotive Historical
1999-11-02
ARP4737D Aircraft Deicing/Anti-Icing Methods With Fluids
Aerospace Historical
1999-11-01
AIR4391A Industrial And Marine Gas Turbine Engine Starting Systems
Aerospace Current
1999-11-01
AS5379 Valves, Safety, Cabin Air, General Specification For
Aerospace Historical
1999-11-01
J2203_199911 SAE 17.6 Cubic Inch Spark Plug Rating Engine
Automotive Historical
1999-11-01
MAM2222B Tolerances, Metric Copper And Copper Alloy Sheet, Strip, And Plate
Aerospace Historical
1999-11-01
AMS4440E Magnesium Alloy Castings, Sand 3.5ce 0.7zr, Precipitation Heat Treated
Aerospace Current
1999-11-01
J2092_199911 Testing Of Wheelchair Lifts For Entry To Or Exit From A Personally Licensed Vehicle
Automotive Historical
1999-11-01
AS4468A Hose Assembly, 125 Psi, Lined Silicone, Potable Water, Procurement Specification
Aerospace Historical
1999-11-01
AS20659A TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS I, FOR 175°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
1999-11-01
AMS2222H Tolerances Copper And Copper Alloy Sheet, Strip, And Plate
Aerospace Historical
1999-11-01
AMS1424C Deicing/Anti-Icing Fluid, Aircraft SAE Type I
Aerospace Historical
1999-11-01
ARP5412 Aircraft Lightning Environment And Related Test Waveforms
Aerospace Historical
1999-11-01
AS9100 Quality Systems – Aerospace – Model For Quality Assurance In Design, Development, Production, Installation And Servicing
Aerospace Historical
1999-11-01
J1793_199910 Self-Propelled Sweepers And Scrubbers Tank And Hopper Capacity Rating
Automotive Historical
1999-10-27
J2340_199910 Categorization And Properties Of Dent Resistant, High Strength, And Ultra High Strength Automotive Sheet Steel
Automotive Historical
1999-10-25
J2353_199910 Data Dictionary For Advanced Traveler Information Systems (ATIS)
Automotive Historical
1999-10-19
J1730_199910 ABS Excitor Ring Location Standardization
Automotive Historical
1999-10-09
J357_199910 Physical And Chemical Properties Of Engine Oils
Automotive Historical
1999-10-09
J686_199910 Motor Vehicle License Plates
Automotive Historical
1999-10-06
J1939/11_199910 Physical Layer–250K Bits/S, Twisted Shielded Pair
Multiple Historical
1999-10-05
AMS3237E BUTYL (IIR) RUBBER Phosphate Ester Resistant 35 – 45
Aerospace Historical
1999-10-01
ARP4714 External Software Loading Of Electronic Engine Controls
Aerospace Historical
1999-10-01
AIR790B Considerations On Ice Formation In Aircraft Fuel Systems
Aerospace Historical
1999-10-01
J2470_199910 Hydraulic Fluid Power–Valves–Method For Assessing The Lock Sensitivity To Contaminants
Automotive Historical
1999-10-01
J2114_199910 Dolly Rollover Recommended Test Procedure
Automotive Historical
1999-10-01
MAM2223B Tolerances, Metric Copper And Copper Alloy Seamless Tubing
Aerospace Historical
1999-10-01
MAM2224B Tolerances, Metric Copper And Copper Alloy Wire
Aerospace Historical
1999-10-01
MAM2221B Tolerances, Metric Copper And Copper Alloy Bars And Rods
Aerospace Historical
1999-10-01
AMSS851A Steel Grit, Shot, And Cut Wire Shot; And Iron Grit And Shot-Blast Cleaning And Peening
Aerospace Historical
1999-10-01
AMSLP391 Plastic Sheets, Rods And Tubing, Rigid Cast, Methacrylate (Multiapplication)
Aerospace Historical
1999-10-01
AMSC27725 Coating, Corrosion Preventative, Polyurethane For Aircraft Integral Fuel Tanks For Use To 250 °F (121 °C)
Aerospace Historical
1999-10-01
AMS4937A Titanium Alloy, Extrusions And Flash Welded Rings 6Al – 6V – 2Sn Beta Extruded Plus Annealed, Heat Treatable
Aerospace Historical
1999-10-01
AS9902 PLUG, MACHINE THREAD DRILLED, PREFORMED PACKING MIL-S-8879 THREAD
Aerospace Historical
1999-10-01
AMS5032F Wire, Steel 0.18 – 0.23C (SAE 1020) Annealed
Aerospace Historical
1999-10-01
AMS6352G Steel Sheet, Strip, And Plate 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135)
Aerospace Historical
1999-10-01
AMS6362E Steel Tubing, Seamless 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) 150 Ksi (1034 MPa) Tensile Strength
Aerospace Historical
1999-10-01
AMS2224F Tolerances Copper And Copper Alloy Wire
Aerospace Historical
1999-10-01
AMS2223G Tolerances Copper And Copper Alloy Seamless Tubing
Aerospace Historical
1999-10-01
AMS5561F Steel, Corrosion And Heat Resistant, Welded And Drawn Or Seamless And Drawn Tubing 9.0Mn – 20Cr – 6.5Ni – 0.28N High-Pressure Hydraulic
Aerospace Historical
1999-10-01
AMS6372J Steel Tubing, Mechanical 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135)
Aerospace Historical
1999-10-01
AMS2647B Fluorescent Penetrant Inspection Aircraft And Engine Component Maintenance
Aerospace Historical
1999-10-01
J1490_199909 Measurement And Presentation Of Truck Ride Vibrations
Automotive Historical
1999-09-30
J2313_199909 On-Board Land Vehicle Mayday Reporting Interface
Automotive Current
1999-09-28
J1479_199909 Automotive Pull-Type Clutch Terminology
Automotive Historical
1999-09-21
J2132_199909 Manual Transmissions And Transaxle High-Speed Lubrication, Unbalance, And Seizure Evaluation
Automotive Historical
1999-09-09
J1401_199909 Road Vehicle–Hydraulic Brake Hose Assemblies For Use With Nonpetroleum-Base Hydraulic Fluids
Automotive Historical
1999-09-09
AMS3240J Chloroprene (CR) Rubber Weather Resistant 35 – 45
Aerospace Historical
1999-09-01
AS21446 BEARING, ROLLER, SELF-ALIGNING SINGLE ROW, BARREL ROLLER, TORQUE TUBE, AIRFRAME, ANTIFRICTION, SEALED TYPE V
Aerospace Historical
1999-09-01
AIR4844B Composites And Metal Bonding Glossary
Aerospace Historical
1999-09-01
ARP4785A Leakage, Requirements And Test Methods, For Fuel Couplings, Pneumatic Couplings, Hydraulic Fittings, Quick Disconnects, And Hose Assemblies
Aerospace Current
1999-09-01
AS1016A Fitting End; Attachable, Flareless Male Flexible Metal Hose – Straight, 45° Elbow And 90° Elbow Styles
Aerospace Current
1999-09-01
AS1015A Fitting End; Attachable, Female Flareless Machined Nipple, Flexible Metal Hose – Straight, 45° Elbow And 90° Elbow Styles
Aerospace Current
1999-09-01
AS1011A Fitting End; Attachable, Male For 37° Flared Tube Connection, Flexible Metal Hose – Straight, 45° Elbow And 90° Elbow Styles
Aerospace Current
1999-09-01
AS4604A Hose Assembly, 3000 Psi, Polytetrafluoroethylene, Metallic Reinforced, 400 °F, Heavy Duty, Aircraft Hydraulic Systems
Aerospace Historical
1999-09-01
AS4623B Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000 Psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems
Aerospace Historical
1999-09-01
AS21442 BEARING, ROLLER, NEEDLE, TRACK ROLLER, SEALED, TYPE X, ANTIFRICTION, INCH
Aerospace Historical
1999-09-01
AS7928/1A TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
1999-09-01
AS7928/2A TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
1999-09-01
AIR5277 Aerospace Fluid Power – Waste Reduction Practices For Used Phosphate Ester Aviation Hydraulic Fluid
Aerospace Historical
1999-09-01
AMSC83445 Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective
Aerospace Historical
1999-09-01
AMSC83231 Coatings, Polyurethane, Rain Erosion Resistant For Exterior Aircraft And Missile Plastic Parts
Aerospace Historical
1999-09-01
AMS2468G Hard Anodic Coating Treatment Of Aluminum Alloys
Aerospace Current
1999-09-01
AMS3242G Chloroprene (CR) Rubber Weather Resistant 75 – 85
Aerospace Historical
1999-09-01
AMS3711D CORE, HONEYCOMB Fibrous, Aramid Base, Phenolic Coated
Aerospace Historical
1999-09-01
AMS3185A Hydraulic Fluid, Nonflammable Chlorotrifluoroethylene (Ctfe) Base
Aerospace Current
1999-09-01
AMS3241H Chloroprene (CR) Rubber Weather Resistant 55 – 65
Aerospace Historical
1999-09-01
J708_199902 Agricultural Tractor Test Code
Commercial Historical
1999-09-01
J4000_199908 Identification And Measurement Of Best Practice In Implementation Of Lean Operation
Automotive Historical
1999-08-31
J2430_199908 Dynamometer Effectiveness Characterization Test For Passenger Car And Light Truck Brake Friction Products
Automotive Historical
1999-08-30
J2453_199908 Manual Transmission And Transaxle Efficiency And Parasitic Loss Measurement
Automotive Historical
1999-08-30
USCAR13 STANDARD FOR IN-TANK ELECTRIC FUEL PUMPS
Automotive Historical
1999-08-15
AS20708 Synchros, General Specification For
Aerospace Historical
1999-08-01
AS9584 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .250-28 UNJF-3A
Aerospace Historical
1999-08-01
AS9502 BOLT, MACHINED – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS 5731, .3125-24 UNJF-3A
Aerospace Historical
1999-08-01
J2498_199908 Minimum Performance Of The Warning Light System Used On Emergency Vehicles
Automotive Historical
1999-08-01
AS9432 BOLT, TEE HEAD – AMS 5735, CHAMFERED, .190-32 UNJF-3A
Aerospace Historical
1999-08-01
AS16781 Fiber Optics Test Methods And Instrumentation
Aerospace Historical
1999-08-01
AS21155 BEARING, PLAIN, SELF ALIGNING
Aerospace Historical
1999-08-01
AIR5065 Influence Of Grain Flow On Bolt Integrity
Aerospace Historical
1999-08-01
AS9525 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .625-18 UNJF-3A
Aerospace Historical
1999-08-01
AS9526 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .750-16 UNJF-3A
Aerospace Historical
1999-08-01
AS9523 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .500-20 UNJF-3A
Aerospace Historical
1999-08-01
AS9521 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .375-24 UNJF-3A
Aerospace Historical
1999-08-01
AS9518 BOLT, MACHINE, HEXAGON HEAD STEEL, CADMIUM PLATED, .190-32 UNJF-3A
Aerospace Historical
1999-08-01
AS9457 BOLT, MACHINE, HEXAGON HEAD, STEEL, .5625-18 UNJF-3A
Aerospace Historical
1999-08-01
AS9453 BOLT, MACHINE, HEXAGON HEAD STEEL, .3125-24 UNJF-3A
Aerospace Historical
1999-08-01
AS9452 BOLT, MACHINE, HEXAGON HEAD, STEEL, .250-28 UNJF-3A
Aerospace Historical
1999-08-01
AS9676 BOLT, MACHINE-CRES AMS 5731, DOUBLE HEXAGON EXTENDED WASHER HEAD, CUPWASHER LOCKED, .190-32 UNJF-3A
Aerospace Historical
1999-08-01
AS9677 BOLT, MACHINE – CRES AMS 5731, DOUBLE HEXAGON EXTENDED WASHER HEAD, CUPWASHER LOCKED, .250-28 UNJF-3A
Aerospace Historical
1999-08-01
AS9581 WASHER, KEY-CRES, AMS 5510, 90°, LOCKING
Aerospace Historical
1999-08-01
ARP4242 Electromagnetic Compatibility Control Requirements Systems
Aerospace Historical
1999-08-01
AS8952 Bearings, Roller, Rod End, Antifriction Self-Aligning
Aerospace Historical
1999-08-01
AS8976 Bearings, Plain, Self-Aligning, All Metal
Aerospace Historical
1999-08-01
AS58091 Circuit Breakers, Trip-Free, Aircraft General Specification For
Aerospace Historical
1999-08-01
AS8914 Bearing, Roller, Self-Aligning, Airframe, Antifriction
Aerospace Historical
1999-08-01
AS9574 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, .190-32 UNJF-3A
Aerospace Historical
1999-08-01
AS9576 BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, .3125-24 UNJF-3A
Aerospace Historical
1999-08-01
AS9696 BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .190-32 UNJF-3A
Aerospace Historical
1999-08-01
AS9492 BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, AMS 5731, .375-24 UNJF-3A
Aerospace Historical
1999-08-01
AS9742 BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES AMS 5643, .250-28 UNJF-3A
Aerospace Historical
1999-08-01
AS70991 Terminals: Lug And Splice, Crimp Style, Aluminum, For Aluminum Aircraft Wire
Aerospace Historical
1999-08-01
AS9465 PIN, STRAIGHT, HEADED, .311 DIAMETER, AMS 5735
Aerospace Historical
1999-08-01
AS9466 PIN, STRAIGHT, HEADED, .373 DIAMETER, AMS 5735
Aerospace Historical
1999-08-01
AS9467 PIN, STRAIGHT, HEADED, .436 DIAMETER, AMS 5735
Aerospace Historical
1999-08-01
AS9844 PIN, STRAIGHT, HEADED, .1874 DIAMETER, AMS 5616
Aerospace Historical
1999-08-01
AS9464 PIN, STRAIGHT, HEADED, .248 DIAMETER, AMS 5735
Aerospace Historical
1999-08-01
AS9503 BOLT, MACHINED – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS 5731, .375-24 UNJF-3A
Aerospace Historical
1999-08-01
AS9459 BOLT, MACHINE-STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD, .750-16 UNJF-3A
Aerospace Historical
1999-08-01
AS121501 NUT & PLAIN
Aerospace Historical
1999-08-01
AS9500 BOLT, MACHINED – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS 5731, .190-32 UNJF-3A
Aerospace Historical
1999-08-01
J2512_199908 Towing Equipment Ratings And Practices
Automotive Historical
1999-08-0
J2384_199908 Air Dryer Test Procedure
Automotive Historical
1999-08-01
J2515_199908 High Temperature Materials For Exhaust Manifolds
Automotive Historical
1999-08-01
AMSC29602 Cleaning Compounds, For Parts Washers And Spray Cabinets
Aerospace Historical
1999-08-01
AMS4007D Aluminum Alloy, Foil 4.4cu 1.5mg 0.60mn
Aerospace Current
1999-08-01
AMS3156D Oil, Fluorescent Penetrant Water Washable
Aerospace Historical
1999-08-01
AMS5827F Steel, Corrosion Resistant, Covered Welding Electrodes 16.4Cr – 4.8Ni – 0.22Cb – 3.6Cu
Aerospace Historical
1999-08-01
AMS3155D Oil, Fluorescent Penetrant Solvent-Soluble
Aerospace Historical
1999-08-01
AS9565 BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, AMS5731, .190-32 UNJF-3A
Aerospace Historical
1999-08-01
AS9463 PIN, STRAIGHT, HEADED, .186 DIAMETER, AMS 5735
Aerospace Historical
1999-08-01
AS9496 BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, AMS 5731, .625-18 UNJF-3A
Aerospace Historical
1999-08-01
AMS6448H Steel, Bars, Forgings, And Tubing 0.95Cr – 0.22V (0.48 – 0.53C) (SAE 6150)
Aerospace Historical
1999-08-01
JA1011_199908 Evaluation Criteria For Reliability-Centered Maintenance (RCM) Processes
Aerospace Historical
1999-08-01
AMS1435A Fluid, Generic, Deicing/Anti-Icing Runways And Taxiways
Aerospace Historical
1999-08-01
J1666_199908 Electric Vehicle Acceleration, Gradeability, And Deceleration Test Procedure
Automotive Historical
1999-08-01
AS122676 PIN, STRAIGHT, HEADLESS, STEEL
Aerospace Historical
1999-08-01
AS10081 TERMINAL SHANK-SWAGING, DIMENSIONS FOR
Aerospace Historical
1999-08-01
AS9501 BOLT, MACHINED – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS 5731, .250-28 UNJF-3A
Aerospace Historical
1999-08-01
J1835_199907 Fastener Hardware For Wheels For Demountable Rims
Commercial Historical
1999-07-29
J2205_199907 Expanded Diagnostic Protocol For OBD II Scan Tools
Automotive Current
1999-07-22
J2374_199907 Location Referencing Message Specification
Automotive Current
1999-07-21
J2201_199907 Universal Interface For OBD II Scan
Automotive Current
1999-07-20
J1216_199907 Test Methods For Metric Threaded Fasteners
Automotive Current
1999-07-20
J2068_199907 Combination Turn Signal Hazard Warning Signal Flashers
Automotive Current
1999-07-15
J1054_199907 Warning Lamp Alternating Flashers
Automotive Current
1999-07-15
J1583_199907 Controller Area Network (Can), An In-Vehicle Serial Communication Protocol
Automotive Current
1999-07-15
J945_199907 Vehicular Hazard Warning Flashers
Automotive Current
1999-07-15
J590_199907 Turn Signal Flashers
Automotive Current
1999-07-15
AS22073 CIRCUIT BREAKER, TRIP-FREE, PUSH-PULL, 1/2 THRU 20 AMP, TYPE I
Aerospace Historical
1999-07-13
J1262_199907 Sound Measurement–Trenching Machines
Commercial Current
1999-07-08
AS20708/56 Synchro, Torque Receiver Transmitter, Type 23TRX6B
Aerospace Historical
1999-07-01
AS20708/52 Synchro, Control Transmitter, Type 23CX6D
Aerospace Historical
1999-07-01
AS20708/2 Synchro, Control Transmitter, Type 11CX4E
Aerospace Historical
1999-07-01
AS20708/9 Synchro, Control Differential Transmitter, Type 26V-11CDX4C
Aerospace Historical
1999-07-01
AS20708/4 Synchro, Torque Transmitter, Type 11TX4C
Aerospace Historical
1999-07-01
AS20708/5 Synchro, Torque Receiver, Type 26V-11TR4C
Aerospace Historical
1999-07-01
AS20708/8 Synchro, Control Transmitter, Type 26V-11CX4C
Aerospace Historical
1999-07-01
AS20708/1 Synchro, Control Transformer, Type 11CT4E
Aerospace Historical
1999-07-01
AS7092 Fittings, Cargo Tiedown, Aircraft
Aerospace Historical
1999-07-01
AS38386/1 CONNECTOR, AIR DUCT HOSE, GROUND COOLING, MALE
Aerospace Historical
1999-07-01
AMSDTL23053/11 Insulation Sleeving, Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-Crosslinked
Aerospace Historical
1999-07-01
AS17983 COMPASS, MAGNETIC, PILOT’S STANDBY
Aerospace Historical
1999-07-01
AS22145 Accelerometer Group, Counting (MS25447 And MS25448)
Aerospace Historical
1999-07-01
AS20708/47 Synchro, Control Differential Transmitter, Type 23CDX4C
Aerospace Historical
1999-07-01
AS20708/48 Synchro, Torque Differential Transmitter, Type 23TDX4C
Aerospace Historical
1999-07-01
AS19692A Pumps, Hydraulic, Variable Flow, General Specification For
Aerospace Historical
1999-07-01
AS20708/30 Synchro, Control Differential Transmitter, Type 18CDX4C
Aerospace Historical
1999-07-01
AS20708/29 Synchro, Control Transformer, Type 18CT4C
Aerospace Historical
1999-07-01
AS20708/34 Synchro, Control Transformer, Type 18CT6D
Aerospace Historical
1999-07-01
AS20708/33 Synchro, Control Transmitter, Type 18CX6C
Aerospace Historical
1999-07-01
AS20708/32 Synchro, Torque Receiver Transmitter, Type 18TRX4A
Aerospace Historical
1999-07-01
AS20708/20 Synchro, Control Transmitter, Type 15CX6C
Aerospace Historical
1999-07-01
AS20708/19 Synchro, Torque Receiver Transmitter, Type 15TRX4A
Aerospace Historical
1999-07-01
AS20708/28 Synchro, Control Transmitter, Type 18CX4D
Aerospace Historical
1999-07-01
AS20708/23 Synchro, Torque Receiver Transmitter, Type 15TRX6A
Aerospace Historical
1999-07-01
AS20708/21 Synchro, Control Transformer, Type 15CT6D
Aerospace Historical
1999-07-01
AS20708/36 Synchro, Control Differential Transmitter, Type 18CDX6D
Aerospace Historical
1999-07-01
AS20708/45 Synchro, Control Transmitter, Type 23CX4D
Aerospace Historical
1999-07-01
AS20708/35 Synchro, Torque Receiver Transmitter, Type 18TRX6B
Aerospace Historical
1999-07-01
ARP5141 Chassis Mounted Lifts Used To Board Airline Passengers With Mobility Impairments
Aerospace Historical
1999-07-01
ARP575B Filter Patch Testing Procedures For Aerospace Hydraulic Pumps And Motors
Aerospace Current
1999-07-01
AMSDTL23053 Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For
Aerospace Historical
1999-07-01
AS8700 Installation And Test Of Electronic Equipment In Aircraft, General Specification For
Aerospace Historical
1999-07-01
AS58091/1 Circuit Breaker, Aircraft, Trip-Free Push Pull, Type I, Dual Safety, -55 Thru +121 Degree C
Aerospace Historical
1999-07-01
AS22598 Interpretation Kit, Photographic, Pocket-Size BS-5( )
Aerospace Historical
1999-07-01
AS24001 FUSE HOLDER, BLOCK-TYPE, 1-, 2-, 3-POLE, 35- TO 60-AMPERE, AIRCRAFT
Aerospace Historical
1999-07-01
AS24000 FUSE HOLDER, BLOCK-TYPE, 1-, 2-, AND 3-POLE, 1- TO 30-AMPERE, AIRCRAFT
Aerospace Historical
1999-07-01
AS28912A BEARING, ROLLER, SELF-ALIGNING, SINGLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE I
Aerospace Historical
1999-07-01
AS28915A BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW TORQUE TUBE, AIRFRAME, ANTI-FRICTION, SEALED, TYPE IV
Aerospace Historical
1999-07-01
AS28913A BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE II
Aerospace Historical
1999-07-01
AS28914A BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE III
Aerospace Historical
1999-07-01
AS38386/2 CONNECTOR, AIR DUCT HOSE, GROUND COOLING, FEMALE
Aerospace Historical
1999-07-01
AIR5320 Summary Of Icing Simulation Test Facilities
Aerospace Historical
1999-07-01
AS20708/14 Synchro, Control Transmitter, Type 15CX4D
Aerospace Historical
1999-07-01
AS7788 Panels, Information, Integrally Illuminated
Aerospace Historical
1999-07-01
AS20708/3 Synchro, Torque Receiver, Type 11TR4C
Aerospace Historical
1999-07-01
AS20708/6 Synchro, Torque Transmitter, Type 26V-11TX4C
Aerospace Historical
1999-07-01
AS20708/131 Synchro, Control Transmitter, Type 15CX4F
Aerospace Historical
1999-07-01
AS20708/81 Synchro, Control Differential Transmitter, Type 11CDX4B
Aerospace Historical
1999-07-01
AS20708/80 Synchro, Control Differential Transmitter, Type 26V-08CDX4C
Aerospace Historical
1999-07-01
AS20708/79 Synchro, Control Transformer, Type 26V-08CT4C
Aerospace Historical
1999-07-01
AS20708/78 Synchro, Control Transmitter, Type 26V-08CX4C
Aerospace Historical
1999-07-01
AS20708/76 Synchro, Torque Differential Transmitter, Type 37TDX6A
Aerospace Historical
1999-07-01
AS20708/70 Synchro, Torque Receiver Transmitter, Type 37TRX4A
Aerospace Historical
1999-07-01
AS20708/74 Synchro, Torque Receiver Transmitter, Type 37TRX6A
Aerospace Historical
1999-07-01
AS20708/67 Synchro, Torque Differential Receiver, Type 31TDR6B
Aerospace Historical
1999-07-01
AS20708/66 Synchro, Torque Receiver Transmitter, Type 31TRX6A
Aerospace Historical
1999-07-01
AS20708/62 Synchro, Torque Receiver Transmitter, Type 31TRX4A
Aerospace Historical
1999-07-01
AS20708/55 Synchro, Torque Differential Transmitter, Type 23TDX6C
Aerospace Historical
1999-07-01
AS20708/54 Synchro, Control Differential Transmitter, Type 23CDX6C
Aerospace Historical
1999-07-01
AS20708/53 Synchro, Control Transformer, Type 23CT6D
Aerospace Historical
1999-07-01
AS20708/500 Synchro, Torque Receiver, Type 26V-10TR4
Aerospace Historical
1999-07-01
AS20708/50 Synchro, Torque Receiver Transmitter, Type 23TRX4A
Aerospace Historical
1999-07-01
AS20708/49 Synchro, Differential Receiver, Type 23TDR4B
Aerospace Historical
1999-07-01
AS20708/46 Synchro, Control Transformer, Type 23CT4C
Aerospace Historical
1999-07-01
AS20708/15 Synchro, Control Transformer, Type 15CT4C
Aerospace Historical
1999-07-01
AS20708/16 Synchro, Control Differential Transmitter, Type 15CDX4D
Aerospace Historical
1999-07-01
AS20708/22 Synchro, Control Differential Transmitter, Type 15CDX6C
Aerospace Historical
1999-07-01
AS20708/17 Synchro, Torque Differential Transmitter, Type 15TDX4C
Aerospace Historical
1999-07-01
AS20708/31 Synchro, Torque Differential Transmitter, Type 18TDX4C
Aerospace Historical
1999-07-01
AS20708/7 Synchro, Control Transformer, Type 26V-11CT4D
Aerospace Historical
1999-07-01
AS8662 Knife, Hunting, Sheathed, Survival, Pilot’s
Aerospace Historical
1999-07-01
AS24509 CIRCUIT BREAKER – AIRCRAFT, TRIP-FREE, TOGGLE, 5 THRU 15 AMP, TYPE I
Aerospace Historical
1999-07-01
AS21441 BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL HEAVY STUD, TYPE IX, ANTIFRICTION, INCH
Aerospace Historical
1999-07-01
AS8660 Silicone Compound NATO Code Number S-736
Aerospace Historical
1999-07-01
AS4088B Aerospace Rod Scraper Gland Design Standard
Aerospace Historical
1999-07-01
J1819_199907 Securing Child Restraint Systems In Motor Vehicles
Automotive Historical
1999-07-01
J2469_199907 Clutch Application Powertrain Startability Rating Requirements For Truck And Bus Applications
Automotive Historical
1999-07-01
J1939/13_199907 Off-Board Diagnostic Connector
Commercial Historical
1999-07-01
AMSG4343 Grease, Pneumatic System
Aerospace Historical
1999-07-01
J1139_199907 Direction-Of-Motion Stereotypes For Automotive Hand Controls
Automotive Historical
1999-07-01
AS28600-5 AS28600-699 Bolt, Close Tolerance – Large Dee Head .500-20UNJF 3A MOD BS4084
Aerospace Current
1999-07-01
AMSI7171 Insulation Blanket, Thermal-Acoustical
Aerospace Historical
1999-07-01
AMSS7124 Sealing Compound, Polysulfide, Accelerator Required, For Aircraft Structures
Aerospace Historical
1999-07-01
AMSR83412/1 Rubber, Ethylene-Propylene, Hydrazine Resistant, O-Rings Sizes And Tolerances
Aerospace Historical
1999-07-01
AS6882 Water Repellent, Window And Windshield, Glass And Plastic
Aerospace Current
1999-07-01
AS13471 Navigation, Display Multicolor Microchart/Map Transparencies
Aerospace Current
1999-07-01
AS22805 Spray Kit, Self Pressurized
Aerospace Current
1999-07-01
AS56761 Splicing; Cable Terminal, Process For, Aircraft
Aerospace Current
1999-07-01
AMSDTL23053/10 Insulation Sleeving, Electrical, Heat Shrinkable, Silicone Rubber, Flexible
Aerospace Historical
1999-07-01
AMSDTL23053/1 Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible
Aerospace Historical
1999-07-01
AMSDTL23053/12 Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene
Aerospace Historical
1999-07-01
AMSDTL23053/13 Insulation Sleeving, Electrical, Heat Shrinkable, Fluoroelastomer, Flexible
Aerospace Historical
1999-07-01
AMSDTL23053/14 Insulation Sleeving, Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer, Semi-Rigid
Aerospace Historical
1999-07-01
AMSDTL23053/15 Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Heavy-Wall, Coated, Flexible, Outer Wall Crosslinked
Aerospace Historical
1999-07-01
AMSDTL23053/16 Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked, Elastomeric Polyolefin, Flexible
Aerospace Historical
1999-07-01
AMSDTL23053/17 Insulation Sleeving, Electrical, Heat Shrinkable, Flame Retarded, Modified Polyolefin, Flexible, Crosslinked
Aerospace Historical
1999-07-01
AMSDTL23053/18 Insulation Sleeving, Electrical, Heat Shrinkable, Modified Fluoropolymer, Crosslinked
Aerospace Historical
1999-07-01
AMSDTL23053/4 Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Dual-Wall, Outer Wall Crosslinked
Aerospace Historical
1999-07-01
AMSDTL23053/5 Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked
Aerospace Historical
1999-07-01
AMSDTL23053/6 Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked
Aerospace Historical
1999-07-01
AMSDTL23053/7 Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked
Aerospace Historical
1999-07-01
AMSDTL23053/8 Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, Crosslinked
Aerospace Historical
1999-07-01
AMSS4383 Sealing Compound, Topcoat, Fuel Tank, Buna-N Type
Aerospace Historical
1999-07-01
AMS6475G Steel, Nitriding, Bars, Forgings, And Tubing 1.1Cr – 3.5Ni – 0.25Mo – 1.2Al (0.21 – 0.26C)
Aerospace Historical
1999-07-01
AMST9046 Titanium And Titanium Alloy, Sheet, Strip, And Plate
Aerospace Historical
1999-07-01
AMSW6858 Welding, Resistance: Spot And Seam
Aerospace Historical
1999-07-01
AS24510 CIRCUIT BREAKER – AIRCRAFT, TRIP-FREE, PUSH-PULL, 5 THRU 15 AMP, TYPE I
Aerospace Historical
1999-07-01
USCAR12 Wiring Component Design Guidelines
Automotive Historical
1999-07-01
AMS5866C Steel, Corrosion Resistant, Flat Wire 18Cr – 9.0Ni (SAE 30302) Spring Temper
Aerospace Historical
1999-07-01
AMS2772B Heat Treatment Of Aluminum Alloy Raw Materials
Aerospace Historical
1999-07-01
AMSR83412 Rubber, Ethylene-Propylene, Hydrazine Resistant
Aerospace Historical
1999-07-01
AS5406 FITTING, UNION, TUBE, .375 BULKHEAD
Aerospace Historical
1999-07-01
AMS5620F Steel, Corrosion And Heat Resistant, Bars, Wire, And Forgings 13Cr (0.30 – 0.40C) (SAE 51420F, 51420FSe) Free-Machining Grade
Aerospace Historical
1999-07-01
AS18276 Lighting, Aircraft Interior, Installation Of
Aerospace Historical
1999-07-01
J995_199907 Mechanical And Material Requirements For Steel Nuts
Automotive Historical
1999-07-01
AMS2759/5C Heat Treatment Martensitic Corrosion Resistant Steel Parts
Aerospace Historical
1999-07-01
AMS5596J Nickel Alloy, Corrosion And Heat Resistant, Sheet, Strip, Foil And Plate 52.5Ni – 19Cr – 3.0Mo – 5.1Cb – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
Aerospace Historical
1999-07-01
J2041_199906 Reflex Reflectors For Use On Vehicles 2032 Mm Or More In Overall WidthHs-34/00
Automotive Historical
1999-06-30
J183_199906 Engine Oil Performance And Engine Service Classification (Other Than “Energy Conserving”)HS-23/00
Automotive Historical
1999-06-30
J1626_199906 Braking, Stability, And Control Performance Test Procedures For Air- And Hydraulic-Brake-Equipped Trucks, Truck-Tractors And Buses
Commercial Historical
1999-06-29
J2064_199906 R134a Refrigerant Automotive Air-Conditioning Hose HS-150/2000
Automotive Historical
1999-06-24
J2235_199906 Paint And Trim Code Location
Automotive Historical
1999-06-21
ARINC628P4B CABIN EQUIPMENT INTERFACES PART 4B CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM CABIN DISTRIBUTION SYSTEM – STAR WIRING
Aerospace Current
1999-06-18
J2232_199906 Vehicle System Voltage—Initial Recommendations
Automotive Current
1999-06-14
JA1006_199906 Software Support Concept
Automotive Historical
1999-06-01
AS21608 Ferrule, Shield Terminating, Crimp Style
Aerospace Historical
1999-06-01
J2452_199906 Stepwise Coastdown Methodology For Measuring Tire Rolling Resistance
Automotive Historical
1999-06-01
J942_199906 Passenger Car Windshield Washer Systems
Automotive Current
1999-06-01
J1741_199906 Discriminating Back-Up Alarm System Standard
Commercial Current
1999-06-01
J2492_199906 Considerations For Suspension Modification
Automotive Historical
1999-06-01
AMSC22587 Cartridges, Grease, 14 Ounce (For Cartridge-Type Grease Gun)
Aerospace Historical
1999-06-01
AMSG6032 Grease, Plug Valve, Gasoline And Oil Resistant, NATO Code Number G-363, Metric
Aerospace Historical
1999-06-01
J1308_199906 Fan Guard For Off-Road Machines
Automotive Historical
1999-06-01
AMST22085 Tapes, Pressure-Sensitive, Adhesive, Preservation And Sealing
Aerospace Current
1999-06-01
AMSP83461/1 Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance At 275°F (135°C) Sizes And Tolerances
Aerospace Historical
1999-06-01
AMSC83873 Cleaning Compound, Precoating Surface, Aircraft And Aerospace Ground Equipment (AGE)
Aerospace Historical
1999-06-01
AMSC5541 Chemical Conversion Coatings On Aluminum And Aluminum Alloys
Aerospace Historical
1999-06-01
AMSB8964 Beryllium Sheet And Plate General Requirements For
Aerospace Historical
1999-06-01
AMSS8840 Steel Sheet And Strip, Corrosion-Resistant, Precipitation Hardening (AM350 And AM355), Premium Quality
Aerospace Historical
1999-06-01
AMST81914/3 Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Standard Convolution
Aerospace Historical
1999-06-01
AMST81914/6 Tubing, Plastic, Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Standard Convolution
Aerospace Historical
1999-06-01
AMST81914/7 Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Integral Braid
Aerospace Historical
1999-06-01
AMST81914/1 Tubing, Plastic, Flexible, Convoluted, Polytetrafluoroethylene, Standard Convolutions
Aerospace Historical
1999-06-01
AMST81914/2 Tubing, Plastic, Extra Flexible, Convoluted, Polytetrafluoroethylene Close Convolution
Aerospace Historical
1999-06-01
AMSA21180 Aluminum-Alloy Castings, High Strength, AREA MECA
Aerospace Historical
1999-06-01
AMSP22968 Paper, Recording, Heat Sensitive
Aerospace Historical
1999-06-01
AMSP21922 Plastic Rods And Tubes, Polyethylene
Aerospace Historical
1999-06-01
AMSI538 Insulation, Electrical, Pasted-Mica
Aerospace Historical
1999-06-01
AMSL18331 Lead Alloy Pig
Aerospace Historical
1999-06-01
AMST5066 Tubing, Carbon Steel (1025), (Aircraft Quality)
Aerospace Historical
1999-06-01
J1865_199906 Dimensional Compatibility For Commercial Vehicles Fitment Of Complete Wheels
Commercial Historical
1999-06-01
AS7928 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
Aerospace Historical
1999-06-01
J56_199906 Road Vehicles—Alternators With Regulators—Test Methods And General Requirements
Automotive Current
1999-06-01
J706_199906 Rating Of Winches
Automotive Historical
1999-06-01
J760_199906 Dimensional Specifications For General Service Sealed Lighting UnitsHS-34/00
Automotive Historical
1999-06-01
J304_199906 Engine Oil TestsHS-23/00
Automotive Historical
1999-06-01
AMSSTD401 Sandwich Constructions And Core Materials; General Test Methods
Aerospace Current
1999-06-01
AMSA22771 Aluminum Alloy Forgings, Heat Treated
Aerospace Historical
1999-06-01
J1889_199906 L.E.D. Lighting DevicesHS-34/00
Automotive Historical
1999-06-01
AS9390A PIN, STRAIGHT, HEADLESS – CRES, AMS 5735, DOWEL STANDARD AND OVERSIZE
Aerospace Historical
1999-06-01
J1468_199905 Application Testing Of Oil-To-Air Oil Coolers For Heat Transfer Performance
Automotive Historical
1999-05-26
J321_199905 Tire Guards For Operator Protection–Earthmoving Haulage Machines
Commercial Historical
1999-05-24
J416_199905 Tensile Test Specimens
Automotive Current
1999-05-20
AIR4253 DESCRIPTION OF ACTUATION SYSTEMS FOR AIRCRAFT WITH FLY-BY-WIRE FLIGHT CONTROL SYSTEMS
Aerospace Historical
1999-05-01
ARP4737C Aircraft Deicing/Anti-Icing Methods With Fluids
Aerospace Historical
1999-05-01
AS4914A Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard
Aerospace Historical
1999-05-01
TSB003_199905 Rules For SAE Use Of SI (Metric) Units
Automotive Current
1999-05-01
AIR4827 Modeling Techniques For Jet Engine Test Cell Aerodynamics
Aerospace Historical
1999-05-01
ARP750C Passenger Seat Design, Commercial Transport Aircraft
Aerospace Current
1999-05-01
AS13591 Cleaning Methods And Procedures For Breathing Oxygen Equipment
Aerospace Historical
1999-05-01
AS23899 Aural Protector, Sound
Aerospace Historical
1999-05-01
AS23479 Indicator, Pressure, 1 1/2-Inch, Integrally Lighted
Aerospace Historical
1999-05-01
AS49011 ROD END – THREADED, AIRCRAFT
Aerospace Historical
1999-05-01
J2486_199905 Tension Indicating Washer Tightening Method For Fasteners
Automotive Historical
1999-05-01
J2236_199905 Standard Method For Determining Continuous Upper Temperature Resistance Of Elastomers
Automotive Historical
1999-05-01
J390_199905 Dual Dimensioning Engineering Drawings
Automotive Current
1999-05-01
J418_199905 Grain Size Determination Of Steels
Automotive Current
1999-05-01
RS732-20 RS732 Manufacturers Identification Monogram For Aerospace Fasteners
Aerospace Current
1999-05-01
AS41910-3 AS41910-912 Seals, For Use With Cap And Plugs Protection, Metric
Aerospace Current
1999-05-01
AS63600-1 AS63600-659 Spacer, Welding (Metric)
Aerospace Current
1999-05-01
AS63660-1 AS63660-679 Ring, Welding (Metric)
Aerospace Current
1999-05-01
AS63450-1 AS63450-459 Nut, Self-Locking, Extended Washer, Double Hexagon
Aerospace Historical
1999-05-01
AMSSTD2219 Fusion Welding For Aerospace Applications
Aerospace Historical
1999-05-01
AMS2635D Radiographic Inspection
Aerospace Current
1999-05-01
AMS4784D GOLD-PALLADIUM-NICKEL ALLOY BRAZING FILLER METAL, HIGH TEMPERATURE 50Au – 25Pd – 25Ni 2015 To 2050 °F (1102 To 1121°C) Solidus-Liquidus Range
Aerospace Historical
1999-05-01
AMS4784E Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 50Au – 25Pd – 25Ni 2015 To 2050 °F (1102 To 1121 °C) Solidus-Liquidus Range
Aerospace Historical
1999-05-01
AMS6263H STEEL BARS, FORGINGS, AND TUBING 1.2Cr – 3.2Ni – 0.12Mo (0.11 – 0.17C) (SAE 9315)
Aerospace Historical
1999-05-01
AMS5925 Steel, Corrosion Resistant, Bars, Wire, And Forgings 15.5Cr – 1.8Mo – 0.20N (0.37 – 0.45 C) Electroslag Remelted
Aerospace Historical
1999-05-01
AMS4785E Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au – 34Pd – 36Ni 2075 To 2130 °F (1135 To 1166 °C) Solidus-Liquidus Range
Aerospace Historical
1999-05-01
AMSS83318 Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks And Fuel Cell Cavities
Aerospace Historical
1999-05-01
AMS4786E Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au – 8.0Pd – 22Ni 1845 To 1915 °F (1007 To 1046 °C) Solidus-Liquidus Range
Aerospace Historical
1999-05-01
AMS4787E Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au – 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
Aerospace Historical
1999-05-01
ARP741A Turbofan And Turbojet Gas Turbine Engine Test Cell Correlation
Aerospace Historical
1999-05-01
AMS2759/10 Automated Gaseous Nitriding Controlled By Nitriding Potential
Aerospace Historical
1999-05-01
J1057_199905 Identification Terminology Of Earthmoving Machines
Commercial Current
1999-05-01
J1473_199905 Brake Performance–Rubber-Tired Earthmoving Machines
Commercial Current
1999-05-01
J356_199905 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized For Bending, Double Flaring, And Beading HS-150/2000
Automotive Historical
1999-05-01
J408_199905 Methods Of Sampling Steel For Chemical Analysis
Automotive Current
1999-05-01
J525_199905 Welded And Cold Drawn Low-Carbon Steel Tubing Annealed For Bending And Flaring HS-150/2000
Automotive Historical
1999-05-01
J1085_199905 Testing Dynamic Properties Of Elastomeric Isolators
Automotive Historical
1999-05-01
J1231_199905 Formed Tube Ends For Hose Connections And Hose Fittings HS-150/2000
Automotive Historical
1999-05-01
J903_199905 Passenger Car Windshield Wiper Systems
Automotive Current
1999-05-01
AMSS8802 Sealing Compound, Temperature Resistant, Integral Fuel Tanks And Fuel Cell Cavities, High Adhesion
Aerospace Historical
1999-05-01
AMS6390D Steel Tubing, Mechanical, 0.95Cr 0.20Mo (0.38-0.43C)
Aerospace Current
1999-05-01
J2495_199904 Thermal Containment Efficiency Of Sleeve Materials
Automotive Historical
1999-04-28
J830_199904 Fuel Injection Equipment Nomenclature
Automotive Historical
1999-04-21
J2467_199904 Welded And Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized For Bending And Flaring
Automotive Historical
1999-04-16
J2435_199904 Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized For Bending, Double Flaring, And Beading
Automotive Historical
1999-04-16
J1668_199904 Diesel Engines—Fuel Injection Pump Testing
Automotive Historical
1999-04-16
ARINC655 REMOTE DATA CONCENTRATOR (RDC) GENERIC DESCRIPTION
Aerospace Current
1999-04-05
J2468_199904 Road Vehicles-Brake Linings-Compressibility Test Procedure
Automotive Historical
1999-04-05
AS9505 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, AMS 5731, .500-20 UNJF-3A
Aerospace Historical
1999-04-01
AS9698 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A
Aerospace Historical
1999-04-01
J2040_199904 Tail Lamps (Rear Position Lamps) For Use On Vehicles 2032 Mm Or More In Overall WidthHS-34/00
Automotive Historical
1999-04-01
AS8091 Adapter, Aircraft, Jacking Point, Design And Installation Of
Aerospace Historical
1999-04-01
AS9357 NUT, PLAIN, HEXAGON-A-286, SILVER PLATED
Aerospace Historical
1999-04-01
AS9524 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .5625-18 UNJF-3A
Aerospace Historical
1999-04-01
AS9522 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .4375-20 UNJF-3A
Aerospace Historical
1999-04-01
AS9519 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED, .250-28 UNJF-3A
Aerospace Historical
1999-04-01
AS9361 NUT, PLAIN, HEXAGON, CHECK-A-286
Aerospace Historical
1999-04-01
AIR1087B Aircraft Accessory Drag Torque During Engine Starts
Aerospace Current
1999-04-01
AIR1467B Gas Energy Limited Starting Systems
Aerospace Current
1999-04-01
AS5604 Compass; Magnetic, Pilot’s Standby
Aerospace Historical
1999-04-01
AS53731 Fuse Holder, Block Type, Aircraft
Aerospace Historical
1999-04-01
AS39631 Universal Joint, Antifriction Bearings
Aerospace Historical
1999-04-01
AS6451 Shields, Protective, Aircraft And Missiles
Aerospace Historical
1999-04-01
AS7928/4 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150°C TOTAL CONDUCTOR TEMPERATURE)
Aerospace Historical
1999-04-01
AS50571 Lights, Instrument, Individual, General Specification For
Aerospace Historical
1999-04-01
AS9558 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A
Aerospace Historical
1999-04-01
AS51989 STUD, LOCKED IN-RING LOCKED, SERRATED
Aerospace Historical
1999-04-01
AS5198 FITTING, TEE, FLARED TO PIPE ON RUN
Aerospace Historical
1999-04-01
AS9493 BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, AMS 5731, .4375-20 UNJF-3A
Aerospace Historical
1999-04-01
AS7997 Motors, Aircraft Hydraulic, Constant Displacement General Specification For
Aerospace Historical
1999-04-01
AS51992 STUD, LOCKED IN-RING, SERRATED, HIGH STRENGTH
Aerospace Historical
1999-04-01
AS4506 BOLTS AND SCREWS, STEEL, CORROSION AND HEAT RESISTANT Precipitation Heat Treated Before Roll Threaded 160 000 Psi Minimum Tensile Strength
Aerospace Historical
1999-04-01
AS7928/1 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 150°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
1999-04-01
AS7928/2 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 150°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
1999-04-01
AS9586 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .375-24 UNJF-3A
Aerospace Historical
1999-04-01
AS9699 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .375-24 UNJF-3A
Aerospace Historical
1999-04-01
AS5196 FITTING, ELBOW, 45°, FLARED TO PIPE
Aerospace Historical
1999-04-01
AS5197 FITTING, TEE, FLARED TO PIPE ON SIDE
Aerospace Historical
1999-04-01
AS7928/5 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, (PERMANENT, TYPE II, CLASS 1) FOR 105°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
1999-04-01
AS9559 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .375-24 UNJF-3A
Aerospace Historical
1999-04-01
J2287_199904 Recommended Design And Performance Standard For Seats With Integrated Lap And Shoulder Restraints
Automotive Historical
1999-04-01
J1419_199904 Tapers For Shaft Ends And Hubs For Fuel Injection Pumps
Automotive Historical
1999-04-01
J1288_199904 Packaging, Storage, And Shelf Life Cf Hydraulic Brake Hose Assemblies
Automotive Historical
1999-04-01
J1203_199904 Light Transmittance Of Automotive Windshields Safety Glazing Materials
Automotive Current
1999-04-01
AMSI7068 Ingot, Zinc Alloy (For Sheet Metal Forming Dies)
Aerospace Historical
1999-04-01
AMSR6855A Elastomer, Synthetic, Sheets, Strips, Molded Or Extruded Shapes, General Specification For
Aerospace Historical
1999-04-01
AMS2646D Contrast Dye Penetrant Inspection
Aerospace Current
1999-04-01
AS6011 Cylinders, Carbon Dioxide Filled, Technical
Aerospace Current
1999-04-01
AS29523 Hook Filler Cap Chain
Aerospace Current
1999-04-01
AMS4273A Aluminum Alloy, Sheet And Plate (2424-T3 Flat Sheet And Plate) Solution Heat Treated And Cold Worked
Aerospace Historical
1999-04-01
AMS4764E Copper Alloy, Brazing Filler Metal 52.5Cu – 38Mn – 9.5Ni 1615 To 1700 °F (879 To 927 °C) Solidus-Liquidus Range
Aerospace Historical
1999-04-01
AS5195 FITTING, ELBOW, 90°, FLARED TO PIPE
Aerospace Historical
1999-04-01
AMS2412G Plating, Silver Copper Strike, Low Bake
Aerospace Historical
1999-04-01
AMS2470K Anodic Treatment Of Aluminum Alloys Chrome Acid Process
Aerospace Historical
1999-04-01
AS9556 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .190-32 UNJF-3A
Aerospace Historical
1999-04-01
AS1990B Aluminum Alloy Tempers
Aerospace Historical
1999-04-01
AS33201 CIRCUIT BREAKER-AIRCRAFT, TRIP-FREE, PUSH PULL, 1/2 THRU 20 AMPS, TYPE I -55 THRU +121°C
Aerospace Historical
1999-04-01
ARP1870 Aerospace Systems Electrical Bonding And Grounding For Electromagnetic Compatibility And Safety
Aerospace Historical
1999-04-01
AMSR83248 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, And Compression Set Resistant
Aerospace Historical
1999-04-01
AMS2411E Plating, Silver For High Temperature Applications
Aerospace Historical
1999-04-01
J514_199904 Hydraulic Tube Fittings
Commercial Historical
1999-04-01
J1634_199904 Electric Vehicle Energy Consumption And Range Test Procedure
Automotive Historical
1999-04-01
AS7928/6 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, (PERMANENT, TYPE II, CLASS 1) FOR 150°C TOTAL CONDUCTOR TEMPERATURE
Aerospace Historical
1999-04-01
AMS4123G Aluminum Alloy, Rolled Or Cold Finished Bars And Rods (7075-T651) Solution And Precipitation Heat Treated
Aerospace Historical
1999-04-01
ARINC629P1-5 MULTI-TRANSMITTER DATA BUS PART 1 TECHNICAL DESCRIPTION
Aerospace Current
1999-03-31
J301_199903 Effective Dates Of New Or Revised Technical ReportsHS-23/00
Automotive
1999-03-26
J875_199903 Trailer Axle Alignment
Commercial Historical
1999-03-24
ARINC704-7 INERTIAL REFERENCE SYSTEM
Aerospace Current
1999-03-19
J2178/4_199903 Class B Data Communication Network Messages – Message Definitions For Three Byte Headers
Automotive Historical
1999-03-11
J2178/2_199903 Class B Data Communication Network Messages – Part 2: Data Parameter Definitions
Automotive Historical
1999-03-11
J2464_199903 Electric Vehicle Battery Abuse Testing
Automotive Historical
1999-03-11
J216_199903 Motor Vehicle Glazing–Electrical Circuits
Automotive Historical
1999-03-09
J343_199903 Test And Test Procedures For SAE 100R Series Hydraulic Hose And Hose Assemblies HS-150/2000
Automotive Historical
1999-03-08
AS3411 BOLT, TEE HEAD – AMS 5662, CHAMFERED, .3125-24UNJF-3A (STRESS RUPTURE RESISTANT)
Aerospace Historical
1999-03-01
AS681H Gas Turbine Engine Steady-State And Transient Performance Presentation For Digital Computer Programs
Aerospace Historical
1999-03-01
AIR4061A Guidelines For Integration Of Engine Monitoring Functions With On-Board Aircraft Systems
Aerospace Historical
1999-03-01
AS3257 CLAMP, LOOP-CUSHIONED, CRES, HIGH TEMP., .204 HOLE
Aerospace Historical
1999-03-01
AIR4986 Engine Electrostatic Gas Path Monitoring
Aerospace Historical
1999-03-01
AIR1191A Performance Of Low Pressure Ratio Ejectors For Engine Nacelle Cooling
Aerospace Current
1999-03-01
AIR1639A Safety Criteria For Pneumatic Starting Systems
Aerospace Current
1999-03-01
ARP1150A Safety Considerations – Flight Deck Seats For Transport Aircraft
Aerospace Current
1999-03-01
AS14114 GYROSCOPE, DISPLACEMENT, ROLL AND PITCH (HARD MOUNTED)
Aerospace Historical
1999-03-01
ARP949B Turbine Engine Starting System Design Requirements
Aerospace Current
1999-03-01
AS28889 VALVE, AIR, HIGH PRESSURE CHARGING, 5000 PSI
Aerospace Historical
1999-03-01
AS3505 INSERT – THIN WALL, LONG SELF-LOCKING, 1025 °F, SILVER PLATED UNS N07718, UNJ THREAD
Aerospace Historical
1999-03-01
AS3410 BOLT, TEE HEAD – AMS 5662, CHAMFERED .250-28UNJF-3A (STRESS RUPTURE RESISTANT)
Aerospace Historical
1999-03-01
AS3412 BOLT, TEE HEAD – AMS 5662, CHAMFERED, .375-24UNJF-3A (STRESS RUPTURE RESISTANT)
Aerospace Historical
1999-03-01
AIR171C GLOSSARY OF TECHNICAL AND PHYSIOLOGICAL TERMS RELATED TO AEROSPACE OXYGEN SYSTEMS
Aerospace Historical
1999-03-01
J1711_199903 Recommended Practice For Measuring The Exhaust Emissions And Fuel Economy Of Hybrid-Electric Vehicles
Automotive Historical
1999-03-01
J2481_199903 Dynamic Simulation Sled Testing
Automotive Historical
1999-03-01
J2414_199903 Application Testing Of Oil-To-Water Oil Coolers For Heat Transfer Performance
Automotive Historical
1999-03-01
J231_199903 Minimum Performance Criteria For Falling Object Protective Structure (Fops)
Commercial Current
1999-03-01
AMS3904/8A Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1500 Denier, 1.0% Finish For Weaving
Aerospace Current
1999-03-01
AMS3904/4B Yarn, Organic Fiber (Para-Aramid), Intermediate Modulus, 1000 Denier, 1.5% Finish For Weaving
Aerospace Current
1999-03-01
AMS3678 Polytetrafluoroethylene (PTFE) Moldings And Extrusions Unfilled, Pigmented, And Filled Components
Aerospace Historical
1999-03-01
AMS5753C Alloy Bars And Forgings, Corrosion And Heat Resistant, 54ni 17.5cr 16.5co 4.0mo 2.9ti 2.9al 0.006b, Vacuum Melted, Solution Heat Treated
Aerospace Current
1999-03-01
AMS5785F Steel Welding Electrode, Covered, Corrosion And Heat Resistant 28.5cr 9.5ni
Aerospace Current
1999-03-01
AMS3243F Chloroprene (CR) Rubber Flame Resistant 55 – 65
Aerospace Historical
1999-03-01
AMS5677D Alloy, Corrosion And Heat Resistant, Covered Welding Electrodes 75ni 19.5cr 1.6(Cb + Ta)
Aerospace Current
1999-03-01
AMS3904/7A Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1500 Denier (1670 Dtex), Zero Finish
Aerospace Historical
1999-03-01
AMS3904/6A Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1500 Denier (1670 Dtex), 7.0% Finish
Aerospace Historical
1999-03-01
AMS3904/5B Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1500 Denier (1670 Dtex), 0.9% Finish
Aerospace Historical
1999-03-01
AMS3904B Organic Fiber (Para-Aramid), Yarn And Roving Intermediate Modulus For Cables, Cordage, And Woven Goods
Aerospace Historical
1999-03-01
AMS3904/9A Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 3000 Denier (3300 Dtex), 0.9% Finish
Aerospace Historical
1999-03-01
AMS3904/10A Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 15,000 Denier (16,700 Dtex), 7.0% Finish
Aerospace Historical
1999-03-01
AMS3904/1B Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 200 Denier (220 Dtex), 1.0% Finish
Aerospace Historical
1999-03-01
AMS3904/3B Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1000 Denier (1110 Dtex), 1.0% Finish
Aerospace Historical
1999-03-01
AMS3904/2B Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 400 Denier (440 Dtex), 1.0% Finish
Aerospace Historical
1999-03-01
AMS4937 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 6Al – 6V – 2Sn Beta Extruded Plus Annealed, Heat Treatable
Aerospace Historical
1999-03-01
AMS3904/11A Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 15,000 Denier (16,700 Dtex), 0.9% Finish
Aerospace Historical
1999-03-01
AMS3904/12A Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 4500 Denier (5000 Dtex), 0.9% Finish
Aerospace Historical
1999-03-01
ARP5400 Identification And Implementation Of Global Standardization Opportunities In The Commercial Jet Transport Industry
Aerospace Current
1999-03-01
JA1000/1_199903 Reliability Program Standard Implementation Guide
Aerospace Historical
1999-03-01
AS14103A BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED OUTER RING, -65 °F TO 325 °F
Aerospace Historical
1999-03-01
J2178/3_199903 Class B Data Communication Network Messages – Part 3 – Frame IDs For Single-Byte Forms Of Headers
Automotive Historical
1999-03-01
J2178/1_199903 Class B Data Communication Network Messages – Detailed Header Formats And Physical Address Assignments
Automotive Historical
1999-03-01
AS3504 INSERT – THIN WALL, SHORT SELF-LOCKING, 1025 °F, SILVER PLATED UNS N07718, UNJ THREAD
Aerospace Historical
1999-03-01
AMS3275B Sheet, Acrylonitrile Butadiene (NBR) Rubber And Non-Asbestos Fiber Fuel And Oil Resistant
Aerospace Historical
1999-03-01
AMS5122G Steel Strip (0.90 – 1.04C) (SAE 1095) Hard Temper
Aerospace Historical
1999-03-01
AS18280 Fittings, Flareless Tube, Fluid Connection
Aerospace Historical
1999-03-01
ARP1971A Aircraft Deicing Vehicle – Self-Propelled, Large Capacity
Aerospace Historical
1999-03-01
J1476_199903 Parking Brake Structural Integrity Test Procedure Vehicles Over 4500 Kg (10 000 Lb) GVWR
Automotive Historical
1999-03-01
J151_199903 Pressure Relief For Cooling System
Automotive Historical
1999-03-01
J1043_199903 Performance Criteria For Falling Object Protective Structure (FOPS) For Industrial Machines
Commercial Current
1999-03-01
J267_199903 Wheels/Rims – Trucks – Performance Requirements And Test Procedures
Commercial Historical
1999-03-01
J639_199903 Safety And Containment Of Refrigerant For Mechanical Vapor Compression Systems Used For Mobile Air-Conditioning Systems
Automotive Historical
1999-03-01
J1701_199903 Torque-Tension Tightening For Inch Series Fasteners
Automotive Historical
1999-03-01
AMS5837F Nickel Alloy, Corrosion And Heat Resistant, Welding Wire 62Ni – 21.5Cr – 9.0Mo – 3.7Cb
Aerospace Historical
1999-03-01
AMS5121G Sheet And Strip, Steel (0.90 – 1.04C) (SAE 1095)
Aerospace Historical
1999-03-01
AMS3281B Sealing Compound, Polysulfide (T) Synthetic Rubber For Integral Fuel Tank And Fuel Cell Cavities Low Density (1.20 To 1.35 Sp Gr), For Intermittent Use To 360 °F (182 °C)
Aerospace Historical
1999-03-01
J1116_199903 Categories Of Off-Road Self-Propelled Work Machines
Automotive Historical
1999-03-01
AMSS5000 Steel, Chrome-Nickel-Molybdenum (E4340) Bars And Reforging Stock
Aerospace Historical
1999-03-01
J2012_199903 Recommended Practice For Diagnostic Trouble Code Definitions
Automotive Historical
1999-03-01
AMS3678/1 Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings And Extrusions
Aerospace Historical
1999-03-01
AMS3143 Powder Coating Materials, Epoxy
Aerospace Historical
1999-03-01
ARINC629P2-2 MULTI-TRANSMITTER DATA BUS PART 2 APPLICATIONS GUIDE
Aerospace Current
1999-02-26
J902_199902 Passenger Car Windshield Defrosting Systems
Automotive Historical
1999-02-19
ARINC610A-1 GUIDANCE FOR USE OF AVIONICS EQUIPMENT AND SOFTWARE IN SIMULATORS
Aerospace Current
1999-02-15
J1678_199902 Low Voltage Ultrathin Wall Primary Cable
Automotive Historical
1999-02-12
J1004_199902 Glossary Of Engine Cooling System Terms
Automotive Historical
1999-02-05
J1393_199902 Heavy Duty Vehicle Cooling Test Code R
Multiple Historical
1999-02-05
J1138_199902 Design Criteria Driver Hand Controls Location For Passenger Cars, Multipurpose Passenger Vehicles, And Trucks (10 000 GVW And Under)
Automotive Historical
1999-02-03
J1658_199902 Alternate Refrigerant Consistency Criteria For Use In Mobile Air-Conditioning Systems
Automotive Historical
1999-02-02
AMS4127G ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS 1.0Mg – 0.6Si – 0.2aCu – 0.20Cr (6061-T6) Solution And Precipitation Heat Treated
Aerospace Historical
1999-02-01
AMS4127H Aluminum Alloy, Forgings And Rolled Or Forged Rings (6061-T6) Solution And Precipitation Heat Treated
Aerospace Historical
1999-02-01
USCAR6 STANDARD FOR D.C. BRUSH MOTOR – HVAC BLOWERS
Automotive Historical
1999-02-01
AMSH6088B Heat Treatment Of Aluminum Alloys
Aerospace Historical
1999-02-01
J1991_199902 Standard Of Purity For Use In Mobile Air-Conditioning Systems
Automotive Historical
1999-02-01
J2209_199902 CFC-12 (R-12) Refrigerant Recovery Equipment For Mobile Automotive Air-Conditioning Systems
Automotive Historical
1999-02-01
J2210_199902 HFC-134a (R-134a) Recovery/Recycling Equipment For Mobile Air-Conditioning Systems
Automotive Historical
1999-02-01
J2099_199902 Standard Of Purity For Recycled HFC-134a (R-134a) For Use In Mobile Air-Conditioning Systems
Automotive Historical
1999-02-01
J1178_199902 Machinery For Forestry–Wheeled Special Machines–Vocabulary, Performance Test Methods, And Criteria For Brake Systems
Automotive
1999-02-01
J1113/25_199902 Electromagnetic Compatibility Measurement Procedure For Vehicle Components-Immunity To Radiated Electromagnetic Fields, 10 Khz To 1000 Mhz-Tri-Plate Line Method
Automotive Historical
1999-02-01
J1657_199902 Selection Criteria For Retrofit Refrigerants To Replace CFC-12 (R-12) In Mobile Air-Conditioning Systems
Automotive Historical
1999-02-01
J1659_199902 Vehicle Testing Requirements For Replacement Refrigerants For CFC-12 (R-12) Mobile Air-Conditioning Systems
Automotive Historical
1999-02-01
J953_199902 Passenger Car Backlight Defogging System
Automotive Historical
1999-02-01
AMS4065G ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 1.2Mn – 0.12Cu (3003-0) Annealed
Aerospace Historical
1999-02-01
AMS4065H Aluminum Alloy, Drawn Seamless Tubing 1.2Mn – 0.12Cu (3003-0) Annealed
Aerospace Historical
1999-02-01
AMS3138C Coating Materials, Fluorocarbon (FKM) Elastomeric
Aerospace Historical
1999-02-01
AMS4443E Magnesium Alloy Castings 4.5Zn – 0.75Zr (ZK51A-T5) Precipitation Heat Treated
Aerospace Historical
1999-02-01
AMS2434A Plating, Tin-Zinc Alloy
Aerospace Historical
1999-02-01
J1597_199902 Laboratory Testing Of Vehicle And Industrial Heat Exchangers For Pressure-Cycle Durability
Automotive Historical
1999-02-01
J516_199902 Hydraulic Hose Fittings HS-150/2000
Automotive Historical
1999-02-01
J1990_199902 Recovery And Recycle Equipment For Mobile Automotive Air-Conditioning Systems
Automotive Historical
1999-02-01
AMS2400T Plating, Cadmium
Aerospace Historical
1999-02-01
J296_199901 Excavator, Mini-Excavator, And Backhoe Hoe Bucket Volumetric Rating
Commercial Current
1999-01-30
J841_199901 Operator Controls For Agricultural Wheeled Tractors
Commercial Current
1999-01-29
J856_199901 Connectors And Plugs
Automotive Current
1999-01-29
J2249_199901 Wheelchair Tiedown And Occupant Restraint Systems For Use In Motor Vehicles
Automotive Current
1999-01-29
J2311_199901 Automatic Transmission Hydraulic Pump Test Procedure
Automotive Historical
1999-01-28
J895_199901 Five Conductor Electrical Connectors For Automotive Type Trailers
Automotive Current
1999-01-26
ARINC611-1 GUIDANCE FOR THE DESIGN AND INSTALLATION OF FUEL QUANTITY SYSTEMS
Aerospace Current
1999-01-25
J905_199901 Fuel Filter Test Methods
Automotive Historical
1999-01-21
J2342_199901 Numbering Systems For End Mills
Automotive Historical
1999-01-20
J513_199901 Refrigeration Tube Fittings—General Specifications
Automotive Historical
1999-01-05
AMS3276C Sealing Compound, Integral Fuel Tanks And General Purpose, Intermittent Use To 360 °F (182 °C)
Aerospace Historical
1999-01-01
AMS3653E Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluoroethylene (PTFE)
Aerospace Historical
1999-01-01
AS5179 NUT, FITTING, PORT
Aerospace Historical
1999-01-01
J2310_199901 Rectangular Cross Section Polymeric Sealing Rings (Metric)
Automotive Historical
1999-01-01
AIR5373 Fuels In Ground Support Equipment (Other Than Gasoline Or Diesel)
Aerospace Historical
1999-01-01
AIR1500 Bibliography – Lossy Filters
Aerospace Current
1999-01-01
AIR1509 Emc Antennas And Antenna Factors: How To Use Them
Aerospace Current
1999-01-01
ARP4268A Aerospace Hydraulic System Fluid Contamination – Location Of Sampling Points
Aerospace Current
1999-01-01
ARP4043A Flight Line Grounding And Bonding Of Aircraft
Aerospace Historical
1999-01-01
ARP1052A Selection Criteria For Internal Combustion Engines Used In Ground Support Equipment
Aerospace Historical
1999-01-01
AS4734B MALE FERRULE, THREADLESS – FLEXIBLE, FIXED CAVITY, SELF-BONDING, BUTT WELDED
Aerospace Historical
1999-01-01
AS5356 Coupling, Fuel Line, Flexible, 125 Psi General Specification For
Aerospace Historical
1999-01-01
AS627A HOSE ASSEMBLY, 3000 Psi, PTFE, FLARED, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS628A HOSE ASSEMBLY, 3000 Psi, TFE, FLARED, STRAIGHT TO 45°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS630A HOSE ASSEMBLY, 3000 Psi, TFE, FLARED, 45° TO 45°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS629A HOSE ASSEMBLY, 3000 Psi, TFE, FLARED, STRAIGHT TO 90°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS631A HOSE ASSEMBLY, 3000 Psi, TFE, FLARED, 45° TO 90°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS632A HOSE ASSEMBLY, 3000 Psi, PTFE, FLARED, 90° TO 90°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS624A HOSE ASSEMBLY, 3000 Psi, TFE, FLARELESS, 45° TO 45°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS625A HOSE ASSEMBLY, 3000 Psi, TFE, FLARELESS, 45° TO 90°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS626A HOSE ASSEMBLY, 3000 Psi, TFE, FLARELESS 90° TO 90°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AMS5670E Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 72Ni – 15.5Cr – 0.95Cb – 2.5Ti – 0.70Al – 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
1999-01-01
AMSF7190 Forging, Steel, For Aircraft/Aerospace Equipment And Special Ordnance Applications
Aerospace Historical
1999-01-01
AS14238A BUSHING, SLEEVE FLANGED, PRESS FIT, REAM TYPE
Aerospace Historical
1999-01-01
AS623A HOSE ASSEMBLY, 3000 Psi, TFE, FLARELESS, STRAIGHT TO 90°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AS622A HOSE ASSEMBLY, 3000 Psi, TFE, FLARELESS, STRAIGHT TO 45°, HEAVYWEIGHT
Aerospace Historical
1999-01-01
J285_199901 Gasoline Dispenser Nozzle Spouts
Automotive Historical
1999-01-01
AMSS6098 Steel, Chrome-Nickel-Molybdenum (8735) Bars And Reforging Stock (Aircraft Quality)
Aerospace Historical
1999-01-01
AMSS6049 Steel, Chrome-Nickel-Molybdenum (8740) Bars And Reforging Stock (Aircraft Quality)
Aerospace Historical
1999-01-01
AMS3138/5B Coating Material, Fluorocarbon (FKM) Elastomeric Anti-Static Topcoating, White
Aerospace Historical
1999-01-01
AMS3138/4B Coating Material, Fluorocarbon (FKM) Elastomeric Anti-Static Topcoating, Black
Aerospace Historical
1999-01-01
AMS3138/3B Coating Material, Fluorocarbon (FKM) Elastomeric Rain-Erosion Resistant, Color Matched
Aerospace Historical
1999-01-01
AMS3138/2B Coating Material, Fluorocarbon (FKM) Elastomeric Rain-Erosion And Thermal-Flash Resistant, White
Aerospace Historical
1999-01-01
AMS3138/1B Coating Material, Fluorocarbon (FKM), Elastomeric Rain-Erosion Resistant, Black
Aerospace Historical
1999-01-01
AMS3138/6B Coating Material, Fluorocarbon (FKM) Elastomeric Anti-Static Topcoating, Color Matched
Aerospace Historical
1999-01-01
AMS3167A Solvents, Cleaning For Cleaning Prior To Application Of Primer And Top Coat Materials
Aerospace Historical
1999-01-01
AMSW21425 Wire, Steel, High Carbon, Square, Uncoated, For Mechanical Springs (General Purpose)
Aerospace Historical
1999-01-01
AMST8506 Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless And Welded
Aerospace Historical
1999-01-01
AMST7081 Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality
Aerospace Historical
1999-01-01
AMS5749D Steel, Corrosion Resistant, Bars, Wire, Forgings, And Tubing 14.5Cr – 4.0Mo – 1.2V (1.10-1.20C) Premium Quality For Bearing Applications, Double Vacuum Melted
Aerospace Historical
1999-01-01
AMS3166B Solvents, Cleaning Cleaning Prior To Application Of Sealing Compounds
Aerospace Historical
1999-01-01
AMS4295A Aluminum Alloy, Sheet And Plate 6.3Cu – 0.30Mn – 0.06Ti – 0.10V – 0.18Zr (2219 – O, F, T31, T351, T37, T81, T851, T87)
Aerospace Historical
1999-01-01
AMS3798/2B Webbing, Low Modulus Aramid 1 (25) Wide, 600 (2669) Breaking Strength Herringbone Twill
Aerospace Historical
1999-01-01
AMS3798/5B Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 3600 (16,014) Breaking Strength Herringbone Twill, Resin Treated
Aerospace Historical
1999-01-01
AMS3798/9B Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 6500 (28,913) Breaking Strength Herringbone Twill Resin Treated
Aerospace Historical
1999-01-01
AMS3798/13B Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 7300 (32,472) Breaking Strength Twill, Resin Treated
Aerospace Historical
1999-01-01
AMS3798/1B Webbing, Low Modulus Aramid 9/16 (14) Wide, 500 (2224) Breaking Strength Herringbone Twill, Resin Treated
Aerospace Historical
1999-01-01
AMS4893B Alloy Castings, Corrosion And Heat Resistant 66Ni – 29Cu – 4.0Si Solution Treated
Aerospace Historical
1999-01-01
AMS4892B Alloy Castings, Corrosion And Heat Resistant 66Ni – 29Cu – 4.0Si As Cast
Aerospace Historical
1999-01-01
AMS3382C Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid And Synthetic Oil Resistant 70 To 80 And 85 To 95
Aerospace Historical
1999-01-01
AMS4148D Aluminum Alloy Die Forgings (7175-T66) Solution And Precipitation Heat Treated
Aerospace Historical
1999-01-01
AMS3655B Tubing, Electrical Insulation Thin Wall, Extruded Polytetrafluoroethylene (PTFE)
Aerospace Historical
1999-01-01
AMS3654C Tubing, Electrical Insulation Light Wall, Extruded Polytetrafluoroethylene (PTFE)
Aerospace Historical
1999-01-01
AIR1129 Aerospace Ground Equipment Criteria For A Propellant Transfer Unit
Multiple Current
1999-01-01
AMS6427H Steel Bars, Forgings, And Tubing 0.88Cr – 1.8Ni – 0.42Mo – 0.08V (0.25 – 0.33C)
Aerospace Historical
1999-01-01
AMS6455G Steel, Sheet, Strip, And Plate 0.95Cr – 0.22V (0.48 – 0.53C) (SAE 6150)
Aerospace Historical
1999-01-01
AMS5743H Steel, Corrosion And Heat Resistant, Bars And Forgings 15.5Cr – 4.5Ni – 2.9Mo – 0.10N Solution Heat Treated, Sub-Zero Cooled, Equalized, And Over-Tempered
Aerospace Historical
1999-01-01
AMS5715D Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 60.5Ni – 23Cr – 14Fe – 1.4Al Annealed
Aerospace Historical
1999-01-01
AMS5717G Nickel Alloy, Corrosion And Heat Resistant, Bars, Forgings, And Rings 45.5Ni – 25.5Cr – 3.2Co – 3.2Mo – 3.2W – 18.5Fe Solution Heat Treated
Aerospace Historical
1999-01-01
AS1654B SLEEVE, THREADLESS – FLEXIBLE, FIXED CAVITY, SELF-BONDING
Aerospace Historical
1999-01-01
AMST6845 Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition
Aerospace Historical
1999-01-01
AMS3277A Sealing Compound, Polythioether Integral Fuel Tanks And General Purpose, Fast Curing Intermittent Use To 360 °F (182 °C)
Aerospace Historical
1999-01-01
AMS5519L Steel, Corrosion Resistant, Sheet And Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 185 Ksi (1276 MPa) Tensile Strength
Aerospace Historical
1999-01-01
AMS6471D Steel Bars, Forgings, And Tubing, Nitriding Grade 1.6Cr – 0.35Mo – 1.2Al (0.38 – 0.43C) Consumable Electrode Vacuum Melted
Aerospace Historical
1999-01-01
AMS5132H Steel, Bars 0.90 – 1.30C
Aerospace Historical
1999-01-01
AMS6290G Steel, Bars And Forgings, Carburizing 1.8Ni – 0.25Mo (0.11 – 0.17C) (SAE 4615)
Aerospace Historical
1999-01-01
AMS5524J Steel, Corrosion And Heat Resistant, Sheet, Strip And Plate 18Cr – 13Ni – 2.5Mo (SAE 30316) Solution Heat Treated
Aerospace Historical
1999-01-01
AMS2670H Brazing, Copper
Aerospace Historical
1999-01-01
AMS4674F Nickel – Copper Alloy, Corrosion Resistant Bars And Forgings 67Ni – 30Cu – 0.04S Free Machining
Aerospace Historical
1999-01-01
AMS6276G Steel Bars, Forgings, And Tubing 0.50Cr – 0.55Ni – 0.20Mo (0.18 – 0.23C) (SAE 8620) Consumable Electrode Vacuum Melted
Aerospace Historical
1999-01-01
AMS6349B Steel Bars 0.95Cr – 0.20Mo (0.38 To 0.43C) (SAE 4140) Normalized
Aerospace Historical
1999-01-01
AS5178 NUT, FITTING, BULKHEAD
Aerospace Historical
1999-01-01
AMS5656C Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, And Rings 9.0Mn – 20Cr – 6.5Ni – 0.27N Solution Heat Treated
Aerospace Historical
1999-01-01
AS621A HOSE ASSEMBLY, 3000 Psi, PTFE, FLARELESS, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
Aerospace Historical
1999-01-01
AMS5511G Steel, Corrosion Resistant, Sheet, Strip, And Plate 19Cr – 9.5Ni (304L) Solution Heat Treated
Aerospace Historical
1999-01-01
AMS4107E Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated And Overaged
Aerospace Historical
1999-01-01
AMS4206 Aluminum Alloy, Plate (7055-T7751) 8.0Zn – 2.3Cu – 2.0Mg – 0.16Zr Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
1999-01-01
AMS6359F Steel Sheet, Strip, And Plate 0.80Cr – 1.8Ni – 0.25Mo (0.38 – 0.43C) (SAE 4340)
Aerospace Historical
1999-01-01
J429_199901 Mechanical And Material Requirements For Externally Threaded Fasteners
Automotive Historical
1999-01-01
AMS2249E Chemical Check Analysis Limits Titanium And Titanium Alloys
Aerospace Historical
1999-01-01
AMS3284 Sealing Compound, Low Adhesion, For Removable Panels And Fuel Tank Inspection Plates
Aerospace Historical
1999-01-01
AS8879A Screw Threads – UNJ Profile, Inch
Aerospace Historical
1999-01-01
AMS2773 Heat Treatment Cast Nickel Alloy And Cobalt Alloy Parts
Aerospace Historical
1999-01-01
AS5176 FITTING, SLEEVE, FLARED
Aerospace Historical
1999-01-01
AMS5616K Steel, Corrosion And Heat Resistant, Bars, Wire, Forgings, Tubing, And Rings 13Cr – 2.0Ni – 3.0W Annealed
Aerospace Historical
1999-01-01
AMS5643P Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing, And Rings 16Cr – 4.0Ni – 0.30 (Cb+Ta) – 4.0Cu Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
1999-01-01
J1645_199901 Fuel System–Electrostatic Charge
Automotive Historical
1999-01-01
AMS6371H Steel, Mechanical Tubing 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130)
Aerospace Historical
1999-01-01
AMS5518J Steel, Corrosion Resistant, Sheet And Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength
Aerospace Historical
1999-01-01
AMS5513G Steel, Corrosion Resistant, Sheet, Strip, And Plate 19Cr – 9.2Ni (SAE 30304) Solution Heat Treated
Aerospace Historical
1999-01-01
AMS5510P Steel, Corrosion And Heat Resistant, Sheet, Strip And Plate 18Cr – 10.5Ni – 0.40Ti (SAE 30321) Solution Heat Treated
Aerospace Historical
1999-01-01
USCAR9 CLASSIFICATION SYSTEM FOR AUTOMOTIVE TOOLING, MACHINERY AND EQUIPMENT LOW VOC WATERBORNE PAINT SYSTEMS
Automotive Current
1998-12-30
USCAR10 Test For Evaluating The Torque-Tension Relationship Of Both External And Internal Metric Threaded Fasteners
Automotive Historical
1998-12-30
USCAR11 Torque-Tension Testing And Evaluation Of Fastener Finishes
Automotive Historical
1998-12-30
USCAR8 Grain Flow Pattern For Bolts And Screws
Automotive Historical
1998-12-30
USCAR7 Deembrittlement Verification Test
Automotive Historical
1998-12-30
J572_199812 Requirements For Sealed Lighting Unit For Construction And Industrial Machines
Commercial Historical
1998-12-23
J992_199812 Brake System Performance Requirements–Truck, Bus, And Combination Of Vehicles
Commercial Current
1998-12-23
ARINC739A-1 MULTI-PURPOSE CONTROL AND DISPLAY UNIT
Aerospace Current
1998-12-16
J687_199812 Nomenclature – Truck, Bus, Trailer
Commercial Current
1998-12-15
J598_199812 Sealed Lighting Units For Construction, Industrial And Forest Machinery
Commercial Current
1998-12-12
AS27642A BEARING, BALL, AIRFRAME, EXTRA LIGHT DUTY
Aerospace Historical
1998-12-01
AS27645A BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, LIGHT AND HEAVY DUTY
Aerospace Historical
1998-12-01
ARP4991 Core Restoration Of Thermosetting Composite Components
Aerospace Historical
1998-12-01
AMSS5626 Steel: Chrome-Molybdenum (4140) Bars, Rods, And Forging Stock (For Aircraft Applications)
Aerospace Historical
1998-12-01
AS6026 Control Unit, Pressure Generating, Manually Operated, Aircraft Hydraulic Brake System
Aerospace Historical
1998-12-01
AS27647A BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA WIDE, DOUBLE ROW, INTERMEDIATE DUTY
Aerospace Historical
1998-12-01
AMSH6088A HEAT TREATMENT OF ALUMINUM ALLOYS
Aerospace Historical
1998-12-01
AMSS18729 Steel Plate, Sheet, And Strip, Alloy 4130 Aircraft Quality
Aerospace Historical
1998-12-01
AMS1451B Disinfectant, Aircraft For Use In Cargo Compartments
Aerospace Historical
1998-12-01
J2438_199812 Low-Temperature Cranking Load Requirements Of An Engine—Air Starter Method
Automotive Current
1998-12-01
J2437_199812 Air Starter Motor Test Procedure
Automotive Current
1998-12-01
J2223/1_199812 Connections For On-Board Road Vehicle Electrical Wiring Harnesses – Part 1: Single-Pole Connectors – Flat Blade Terminals – Dimensional Characteristics And Specific Requirements
Automotive Historical
1998-12-01
J2223/2_199812 Connections For On-Board Road Vehicle Electrical Wiring Harnesses – Part 2: Tests And General Performance Requirements
Automotive Historical
1998-12-01
J2181_199812 Steady-State Circular Test Procedure For Trucks And Buses
Commercial Historical
1998-12-01
J2180_199812 A Tilt Table Procedure For Measuring The Static Rollover Threshold For Heavy Trucks
Commercial Historical
1998-12-01
J2223/3_199812 Connections For On-Board Road Vehicle Electrical Wiring Harnesses – Part 3: Multipole Connectors – Flat Blade Terminals – Dimensional Characteristics And Specific Requirements
Automotive Historical
1998-12-01
J2241_199812 Automotive Starter Drive Remanufacturing Procedures
Automotive Historical
1998-12-01
J2242_199812 Automotive Starter Solenoid Remanufacturing Procedures
Automotive Historical
1998-12-01
J2073_199812 Automotive Starter Remanufacturing Procedures
Automotive Historical
1998-12-01
J1516_199812 Accommodation Tool Reference Point
Commercial Historical
1998-12-01
J1517_199812 Driver Selected Seat Position
Commercial Historical
1998-12-01
AMSS18732A Steel Bars, Wire, Forging Stock, Forgings, Tubing (431), Special Quality
Aerospace Historical
1998-12-01
AMSS18728 Steel Plate, Sheet And Strip, Alloy 8630, Aircraft Quality
Aerospace Historical
1998-12-01
AMSS7420 Steel Bars, Alloy, Chromium, High Carbon E52100 (Aircraft Quality)
Aerospace Historical
1998-12-01
AMSS6709 Steel, Chrome-Molybdenum-Aluminum; Bars, Rods, Billets And Forging Stock (For Nitriding) (Aircraft Quality)
Aerospace Historical
1998-12-01
AMSS7952 Steel, Sheet And Strip, Uncoated, Carbon (1020 And 1025) (Aircraft Quality)
Aerospace Historical
1998-12-01
AMSS7947 Steel, Sheet And Strip (1095) (Aircraft Quality)
Aerospace Historical
1998-12-01
AMSQQS700 Steel, Sheet And Strip, Medium And High Carbon
Aerospace Historical
1998-12-01
AMSSTD66 Steel: Chemical Composition And Hardenability
Aerospace Historical
1998-12-01
AMST6735 Tubing, Chrome-Molybdenum, 4135 Steel, Seamless Aircraft Quality
Aerospace Historical
1998-12-01
AMSS8949 Steel Bars, Plates, Sheets, Billets, And Reforging Stock Type D6AC
Aerospace Historical
1998-12-01
AMSSTD183 Continuous Identification Marking Of Iron And Steel Products
Aerospace Historical
1998-12-01
AMSS851 Steel Grit, Shot, And Cut Wire Shot; And Iron Grit And Shot-Blast Cleaning And Peening
Aerospace Historical
1998-12-01
AMSS8503 Steel Bars, Chrome-Vanadium (6150), Aircraft Quality
Aerospace Historical
1998-12-01
AMSS8690 Steel, Chrome-Nickel-Molybdenum, 8620, Bars Aircraft Quality
Aerospace Historical
1998-12-01
AMS3631C Polyvinyl Chloride (PVC) Plastic Extrusions High Temperature, Flexible
Aerospace Historical
1998-12-01
AMS3667C Polytetrafluoroethylene Sheet, Molded General Purpose Grade, As Sintered
Aerospace Historical
1998-12-01
AMS3669D Polytetrafluoroethylene Sheet, Molded Premium Grade, As Sintered
Aerospace Historical
1998-12-01
AMSS7108 Steel, Alloy (Manganese-Silicon-Nickel), Bars And Forging Stock (Aircraft Quality)
Aerospace Historical
1998-12-01
AIR77 Spark Energy Measurements Using Oscilloscopic Methods
Aerospace Current
1998-12-01
AMS1631B Cleaner, Carpet Water Extraction Type
Aerospace Historical
1998-12-01
AMS1630B Cleaner, Carpet Shampoo Type
Aerospace Historical
1998-12-01
AMSQQW428 Wire, Steel, Carbon (High Carbon, Round, For Mechanical Springs, General Purpose)
Aerospace Historical
1998-12-01
AMS5894A Cobalt Alloy, Bars, Sheet, And Plate 60Co – 28Cr – 4.5W – 1.15C Solution Heat Treated
Aerospace Historical
1998-12-01
J786A_199812 Brake System Road Test Code – Truck, Bus, And Combination Of Vehicles
Commercial Current
1998-12-01
J695_199812 Turning Ability And Off Tracking–Motor Vehicles
Commercial Historical
1998-12-01
AMST6736 Tubing, Chrome-Molybdenum (4130 Or 8630) Steel, Seamless And Welded
Aerospace Historical
1998-12-01
J1521_199812 Truck Driver Shin-Knee Position For Clutch And Accelerator
Commercial Historical
1998-12-01
J1522_199812 Truck Driver Stomach Position
Automotive Historical
1998-12-01
ARINC731-3 ELECTRONIC CHRONOMETER
Aerospace Current
1998-11-30
AMS5627F Steel, Corrosion And Heat Resistant, Bars, Wire, Forgings, Tubing, And Rings 17Cr (SAE 51430) Annealed
Aerospace Historical
1998-11-20
J538_199811 Grounding Of Storage Batteries
Automotive Current
1998-11-11
J1047_199811 Tubing – Motor Vehicle Brake System Hydraulic
Automotive Current
1998-11-11
J1989_199811 Recommended Service Procedure For The Containment Of Cfc-12 (R-12)
Automotive Historical
1998-11-09
J2211_199811 Recommended Service Procedure For The Containment Of HFC-134a (R-134a)
Automotive Historical
1998-11-09
J2296_199811 Retest Of Refrigerant Container
Automotive Historical
1998-11-09
J1771_199811 Criteria For Refrigerant Identification Equipment For Use With Mobile Air-Conditioning Systems
Automotive Historical
1998-11-09
J690_199811 Certificates Of Maximum Net Horsepower For Motor Trucks And Truck Tractors
Commercial Current
1998-11-06
J638_199811 Motor Vehicle Heater Test Procedure
Automotive Historical
1998-11-05
J1628_199811 Technical Procedure For Using Electronic Refrigerant Leak Detectors For Service Of Mobile Air Conditioning Systems
Automotive Historical
1998-11-05
J1662_199811 Compatibility Of Retrofit Refrigerants With Air-Conditioning System Materials
Automotive Historical
1998-11-05
J1778_199811 Ship Systems And Equipment – Recommended Practice For Hydraulic Fluid Selection
Automotive Historical
1998-11-02
J1230_199811 Minimum Requirements For Wheel-Slip Brake-Control System Malfunction Signals
Commercial Current
1998-11-02
JDRAFT Draft Of Ground Vehicle Standard
Automotive Current
1998-11-01
J2360_199811 Lubricating Oil, Gear Multipurpose (Metric) Military Use
Automotive Historical
1998-11-01
AS9588 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .500-20 UNJF-3A
Aerospace Historical
1998-11-01
ARP1199B Selection, Application, And Inspection Of Electric Overcurrent Protective Devices
Aerospace Current
1998-11-01
ARP4260 Photometric And Colorimetric Measurement Procedures For Airborne Flat Panel Displays
Aerospace Historical
1998-11-01
AS21428A BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, PRECISION
Aerospace Historical
1998-11-01
AS9217 BOLT, MACHINE – STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .190-32 UNJF-3A
Aerospace Historical
1998-11-01
AS9882 NUT, PLAIN, HEX-DRILLED – AMS 6322, CADMIUM PLATED, MIL-S-8879
Aerospace Historical
1998-11-01
AS9456 BOLT, MACHINE, HEXAGON HEAD, STEEL, .500-20 UNJF-3A
Aerospace Historical
1998-11-01
AS9455 BOLT, MACHINE, HEXAGON HEAD, STEEL, .4375-20 UNJF-3A
Aerospace Historical
1998-11-01
AS9451 BOLT, MACHINE, HEXAGON HEAD, STEEL, .190-32 UNJF-3A
Aerospace Historical
1998-11-01
AS9582 WASHER, KEY-CRES, AMS 5510, 270 DEG. LOCKING
Aerospace Historical
1998-11-01
AS27648A BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTERNAL SELF ALIGNING, EXTRA LIGHT DUTY
Aerospace Historical
1998-11-01
AS14153A CIRCUIT BREAKER – AIRCRAFT, TRIP-FREE, PUSH-PULL 3 PHASE, 1 THRU 35 AMP, TYPE 1
Aerospace Historical
1998-11-01
ARP1420A Gas Turbine Engine Inlet Flow Distortion Guidelines
Aerospace Historical
1998-11-01
AS9204 GASKET – METAL O-RING, .094 TUBE X .010 WALL, CRES
Aerospace Historical
1998-11-01
AS9205 GASKET – METAL O-RING, .125 TUBE X .010 WALL, CRES
Aerospace Historical
1998-11-01
AS24463A BEARING, ROLLER, NEEDLE-SINGLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE III, ANTIFRICTION, INCH
Aerospace Historical
1998-11-01
AS9697 BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .250-28 UNJF-3A
Aerospace Historical
1998-11-01
AS27640A BEARING, BALL, AIRFRAME, ANTI-FRICTION, HEAVY DUTY
Aerospace Historical
1998-11-01
AS27649A BEARING, BALL, AIRFRAME, ANTIFRICTION, INTERMEDIATE DUTY
Aerospace Historical
1998-11-01
AS27641A BEARING, BALL, AIRFRAME, ANTI-FRICTION, INTERMEDIATE DUTY
Aerospace Historical
1998-11-01
AS27643A BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, DOUBLE ROW, HEAVY DUTY
Aerospace Historical
1998-11-01
AS27646A BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY
Aerospace Historical
1998-11-01
AS9364 NUT, SLOTTED, HEXAGON – SHEAR, A-286 SILVER PLATED, MIL-S-8879
Aerospace Historical
1998-11-01
AS9112 BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 5731, .3125-24 UNJF-3A
Aerospace Historical
1998-11-01
AS9741 BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES AMS 5643, .190-32 UNJF-3A
Aerospace Historical
1998-11-01
AS7477C Bolts And Screws, Steel, UNS S66286 Tensile Strength 130 Ksi, Procurement Specification
Aerospace Historical
1998-11-01
J2461_199811 Vehicle Electronic Programming Stations (Veps) System Specification For Win32St
Automotive Historical
1998-11-01
J2359_199811 Lubricating Oil, Internal Combustion Engine, Military Combat/Tactical Service
Automotive Historical
1998-11-01
J2361_199811 Lubricating Oil, Internal Combustion Engine, Preservation Break-In
Automotive Historical
1998-11-01
J2362_199811 Lubricating Oil, Automotive Engine, Api Service Sm For Military Administrative Service
Automotive Historical
1998-11-01
J2363_199811 Lubricant Oil For Wheeled Military Vehicles With Heavy-Duty Diesel Engines
Automotive Historical
1998-11-01
J1732_199811 Hfc-134a (R-134a) Refrigerant Recovery Equipment For Mobile Automotive Air-Conditioning Systems
Automotive Historical
1998-11-01
J1661_199811 Procedure Retrofitting CFC-12 (R-12) Mobile Air-Conditioning Systems To HFC-134a (R-134a)
Automotive Historical
1998-11-01
J1660_199811 Fittings And Labels For Retrofit Of Cfc-12 (R-12) Mobile Air-Conditioning Systems To Hfc-134a (R-134a)
Automotive Historical
1998-11-01
AMS9226 WIRE – STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 °F
Aerospace Historical
1998-11-01
AMSS22141 Steel, Investment Castings Alloy And Carbon
Aerospace Historical
1998-11-01
AMSS6050 Steel, Chrome-Nickel-Molybdenum (8630) Bars And Reforging Stock (Aircraft Quality)
Aerospace Historical
1998-11-01
AMSS11310 Steel Bars, Carbon, Hot Rolled, For Cold Shaping, Including Cold Extrusion
Aerospace Historical
1998-11-01
AMS3022C Reference Fluid For Testing Hydrocarbon Fuel Resistant Materials: 10% Aromatic Content
Aerospace Historical
1998-11-01
AMS3659C Polytetrafluoroethylene Extrusions Premium Strength, Sintered And Stress-Relieved
Aerospace Historical
1998-11-01
AMS3658C Polytetrafluoroethylene Extrusions Premium Strength, Sintered And Stress-Relieved Radiographically Inspected
Aerospace Historical
1998-11-01
AMS3657C Polytetrafluoroethylene Extrusions Premium Strength, As Sintered
Aerospace Historical
1998-11-01
AMS3244G Chloroprene (CR) Rubber Flame Resistant 65 – 75
Aerospace Historical
1998-11-01
AMS5932 Steel, Corrosion And Heat Resistant, Bars, Forgings And Tubing 14.5Cr – 2.3Ni – 12.5Co – 4.0Mo – 0.60V – 0.03Cb Premium Aircraft-Quality, Carburizing Double Vacuum Melted
Aerospace Historical
1998-11-01
AMS3205L Synthetic Rubber Low-Temperature Resistant 45 – 55
Aerospace Historical
1998-11-01
AMS3204L Rubber Synthetic Low-Temperature Resistant 25 – 35
Aerospace Historical
1998-11-01
AMS3202L Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 55 – 65
Aerospace Historical
1998-11-01
AMS3201K Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 35 – 45
Aerospace Historical
1998-11-01
AMS3200J Butadiene Acrylonitrile (NBR) Rubber Petroleum-Base Hydraulic Fluid Resistant 55 – 65
Aerospace Historical
1998-11-01
AIR4281 Oil Systems For Helicopter Powerplants
Aerospace Current
1998-11-01
AMSS8559 Steel Bars, Carbon, AISI (1095), Aircraft Quality
Aerospace Historical
1998-11-01
AMSQQA250/24A Aluminum Alloy, 7075, Plate And Sheet (Improved Exfoliation Resistant)
Aerospace Historical
1998-11-01
AMS5745E Steel, Corrosion And Heat Resistant, Bars And Forgings 16.5Cr – 4.5Ni – 2.9Mo – 0.10N Equalized And Over-Tempered
Aerospace Historical
1998-11-01
AMS3656E Polytetrafluoroethylene Extrusions Normal Strength, As Sintered
Aerospace Historical
1998-11-01
AS9686 BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL AMS 6304, DIFFUSED NICKEL CADMIUM PLATE, .250-28 UNJF-3A
Aerospace Historical
1998-11-01
AS9373 GASKET – METAL O-RING, .062 TUBE X .010 WALL SILVER PLATED
Aerospace Historical
1998-11-01
AS9201 NUT, PLAIN, HEX, BOSS CONNECTION, CORROSION RESISTANT STEEL
Aerospace Historical
1998-11-01
J184_199811 Qualifying A Sound Data Acquisition System
Automotive Historical
1998-11-01
AS24563 COUPLING FLANGERS, V-BAND, PROFILE DIMENSIONS FOR
Aerospace Historical
1998-11-01
AMS3216E Fluorocarbon (FKM) Rubber High-Temperature – Fluid Resistant Low Compression Set 70 To 80
Aerospace Historical
1998-11-01
AMS3218A Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 To 95
Aerospace Historical
1998-11-01
AMS4337 Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn – 2.3Cu – 2.0Mg – 0.16Zr Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
1998-11-01
AMS5561E Steel, Corrosion And Heat Resistant, Welded And Drawn Or Seamless And Drawn Tubing 9.0Mn – 20Cr – 6.5Ni – 0.28N High-Pressure Hydraulic
Aerospace Historical
1998-11-01
AS27644A BEARING, BALL, AIRFRAME, ANTI-FRICTION, DOUBLE ROW, HEAVY DUTY
Aerospace Historical
1998-11-01
ARP5316 Storage Of Aerospace Elastomeric Seals And Seal Assemblies Which Include An Elastomer Element Prior To Hardware Assembly
Aerospace Historical
1998-11-01
AMSH6875 Heat Treatment Of Steel, Process For
Aerospace Historical
1998-11-01
AMS2469F Hard Anodic Coating Treatment Of Aluminum And Aluminum Alloys Processing And Performance Requirements
Aerospace Historical
1998-11-01
AMS5659K Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, And Extrusions 15Cr – 4.5Ni – 0.30Cb – 3.5Cu Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
Aerospace Historical
1998-11-01
AMS4049J Aluminum Alloy, Sheet And Plate, Alclad 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (Alclad 7075; -T6 Sheet – T651 Plate) Solution And Precipitation Heat Treated
Aerospace Historical
1998-11-01
AMS4050F Aluminum Alloy, Plate 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, And Overaged
Aerospace Historical
1998-11-01
J2124_199810 Numbering System For Single Diameter And Taper Reamers
Automotive Historical
1998-10-14
J2123_199810 Numbering System For Taps
Automotive Historical
1998-10-14
J2122_199810 Numbering System For Single Diameter Drills
Automotive Historical
1998-10-14
J2276_199810 Numbering System For Multiple Diameter Cutting Tools
Automotive Historical
1998-10-13
ARINC724-9 AIRCRAFT COMMUNICATIONS ADDRESSING AND REPORTING SYSTEM (ACARS)
Aerospace Current
1998-10-09
J1939/71_199810 Vehicle Application Layer
Automotive Historical
1998-10-07
AS9553 NUT-HEX, BOSS CONNECTION, CRES
Aerospace Historical
1998-10-01
J2270_199810 Ship Systems And Equipment–Threaded Fasteners–Inspection, Test, And Installation Requirements
Commercial Historical
1998-10-01
AS9520 BOLT, MACHINE, HEXAGON HEAD, STEEL, CADMIUM PLATED .3125-24 UNJF-3A
Aerospace Historical
1998-10-01
AS9434 BOLT, TEE HEAD – AMS 5735, CHAMFERED, .3125-24 UNJF-3A
Aerospace Historical
1998-10-01
ARP4102/14A Full-Format Printer
Aerospace Historical
1998-10-01
ARP4102/15 ELECTRONIC LIBRARY SYSTEM (ELS)
Aerospace Historical
1998-10-01
ARP1288A Placarding Of Aircraft Hydraulic Equipment To Identify Phosphate Ester Fluid Compatibility
Aerospace Historical
1998-10-01
ARP4102/12 MICROWAVE LANDING SYSTEM (MLS) RECEIVER AND MLS AREA NAVIGATION EQUIPMENT FOR TRANSPORT AIRCRAFT
Aerospace Historical
1998-10-01
AS9058A RING – BACK-UP, BOSS CONNECTION, AMS 3652, AMS 3656, AMS 3660, AMS 3667
Aerospace Historical
1998-10-01
AS24461A BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH
Aerospace Historical
1998-10-01
AMS6424C Steel Bars, Forgings, And Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.49 – 0.55C)
Aerospace Historical
1998-10-01
AS14227A LOCK, ROD END, IMPROVED STRENGTH, NAS LUG
Aerospace Historical
1998-10-01
AIR1351D Manufacturers’ Identification Of Aerospace Electrical And Electronic Wiring Devices And Accessories
Aerospace Historical
1998-10-01
AS62700-6 AS62700-742 Clamp, Loopstyle (Grounding Strip) Cushion Reinforced (Electrical Harness)
Aerospace Current
1998-10-01
J2295_199810 Fasteners–Part Standard–Cap Screws, Hex Bolts, And Hex Nuts
Automotive Historical
1998-10-01
J2118_199810 Braking Performance–Rubber-Tired Asphalt Pavers
Commercial Historical
1998-10-01
J2403_199810 Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature
Automotive Historical
1998-10-01
J1644_199810 Metallic Tube Connections For Fluid Power And General Use – Test Methods For Threaded Hydraulic Fluid Power Connectors HS-150/2000
Automotive Historical
1998-10-01
J983_199810 Crane And Cable Excavator Basic Operating Control Arrangements
Automotive Current
1998-10-01
MAM2241C Tolerances, Metric Corrosion And Heat Resistant Steel, Iron Alloy, Titanium, And Titanium Alloy Bars And Wire
Aerospace Historical
1998-10-01
AMS7292A Labels, Aluminum Foil-Etched, Anodized, And Dyed
Aerospace Current
1998-10-01
AMSS18732 STEEL BARS, WIRE, FORGING STOCK, FORGINGS, TUBING (431), SPECIAL QUALITY
Aerospace Historical
1998-10-01
AMS4816C Bearings, Silver-Clad Steel Strip
Aerospace Historical
1998-10-01
AMS4873E Aluminum Bronze Alloy, Sand Castings 85Cu – 11A1 – 3.6Fe Solution Heat Treated And Tempered
Aerospace Historical
1998-10-01
AMS4389G Magnesium Alloy Extrusions 3.0th – 1.5mn (Hm31a-Ts) Precipitation Heat Treated
Aerospace Current
1998-10-01
AMS5856B Alloy Billets And Preforms, Corrosion And Heat Resistant, 59.5ni 12cr 10co 3.0mo 6.0w 3.0ti 1.5ta 4.5al 0.015b 0.10zr (0.30-0.35c), Powder-Metallurgy Product
Aerospace Current
1998-10-01
AMS2414F Plating, Lead
Aerospace Historical
1998-10-01
AMS2468F Hard Anodic Coating Treatment Of Aluminum Alloys
Aerospace Historical
1998-10-01
AMS3283A Sealing Compound, Polysulfide Non-Curing, Groove Injection Temperature And Fuel Resistant
Aerospace Historical
1998-10-01
AMS4966L Titanium Alloy, Forgings 5Al – 2.5Sn Annealed, 110 Ksi (758 MPa) Yield Strength
Aerospace Historical
1998-10-01
AMS5028C Steel, Welding Wire 1.05Cr – 0.55Ni – 1.0Mo – 0.07V (0.34 – 0.40C) Vacuum Melted, Environment-Controlled Packaging
Aerospace Historical
1998-10-01
AMS5808B Steel, Corrosion And Heat Resistant, Welding Wire 19Cr – 13Ni – 2.5Mo High Ferrite Grade, Trace Element Controlled
Aerospace Historical
1998-10-01
AMS4297 Aluminum Alloy Sheet 4.4Cu – 1.5Mg – 0.60Mn (2024; -T4 Flat Sheet) Solution Heat Treated, High Formability
Aerospace Historical
1998-10-01
AMS4089C Aluminum Alloy, Plate 1.6Cu – 2.2Mg – 0.22Cr – 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved By Stretching, And Precipitation Heat Treated
Aerospace Historical
1998-10-01
AMS6481 Steel Bars, Forgings, And Tubing, Nitriding 3Cr – 1Mo – 0.2V – (0.29 – 0.36C) Premium Aircraft-Quality For Bearing Applications Double Vacuum Melted
Aerospace Historical
1998-10-01
AMS3046D Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged
Aerospace Historical
1998-10-01
AMS2259C Chemical Check Analysis Limits Wrought Low-Alloy And Carbon Steels
Aerospace Historical
1998-10-01
AMS4979D Titanium Alloy, Bars, Wire, Forgings, And Rings 6Al, 6V – 2Sn Solution And Precipitation Heat Treated
Aerospace Historical
1998-10-01
J1166_199810 Sound Measurement–Off-Road Self-Propelled Work Machines Operator-Work Cycle
Commercial Historical
1998-10-01
J1028_199810 Mobile Crane Working Area Definitions
Commercial Historical
1998-10-01
AMS6346 Steel Bars 0.95Cr – 0.20Mo (0.28 To 0.33C) (SAE 4130) Hardened And Tempered, 125 Ksi (862 MPa) Tensile Strength
Aerospace Historical
1998-10-01
AMS2241M Tolerances Corrosion And Heat Resistant Steel, Iron Alloy, Titanium, And Titanium Alloy Bars And Wire
Aerospace Historical
1998-10-01
AMS1428C Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, And IV
Aerospace Historical
1998-10-01
AMS5548L Steel, Corrosion And Heat Resistant, Sheet And Strip 16.5Cr – 4.5Ni – 2.9Mo – 0.10N 1850 To 1975 °F (1010 To 1079 °C) Annealed
Aerospace Historical
1998-10-01
AMS2447B Coating, Thermal Spray High Velocity Oxygen/Fuel Process
Aerospace Historical
1998-10-01
AMS2438A Plating, Chromium Thin, Hard, Dense Deposit
Aerospace Historical
1998-10-01
AMS7276F Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 To 80
Aerospace Historical
1998-10-01
J1939/73_199810 Application Layer–Diagnostics
Commercial Historical
1998-10-01
AMS5793A Powder, Plasma Spray 9Ni – 5A1
Aerospace Historical
1998-09-01
AIR1375B MINIMUM SAFETY REQUIREMENTS FOR SPECIAL PURPOSE AIRLINE GROUND SUPPORT EQUIPMENT
Aerospace Historical
1998-09-01
AS4372A Performance Requirements For Wire, Electric, Insulated Copper Or Copper Alloy
Aerospace Historical
1998-09-01
USCAR4 STANDARD FOR CIGAR LIGHTERS & POWER OUTLETS
Automotive Historical
1998-09-01
ARP1480A Ground Electrical Power Unit Brushless, Synchronous, Electric Motor-Driven 400 Hertz, 3-Phase Output
Aerospace Current
1998-09-01
AS8791/1A RETAINER, PACKING, HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE, SINGLE TURN
Aerospace Historical
1998-09-01
AS4950A Design And Performance Criteria Transport Aircraft Portable Megaphones
Aerospace Historical
1998-09-01
ARP1702A Defining And Measuring Factors Affecting Helicopter Turbine Engine Power Available
Aerospace Historical
1998-09-01
AMS3829B Cloth, Type “E”-Glass, Style 7781 Fabric Solution-Addition-Type PMR-15 Polyimide Resin Impregnated
Aerospace Historical
1998-09-01
AMS3817D Nylon Braid, Flat Electrical Tying Resin Coated
Aerospace Historical
1998-09-01
AMS2251G Tolerances Low-Alloy Steel Bars
Aerospace Historical
1998-09-01
J1892_199809 Recommended Practice For Bar-Coded Vehicle Emission Configuration Label
Automotive Historical
1998-09-01
J264_199809 Vision Glossary
Automotive Historical
1998-09-01
J2352_199809 Mayday Industry Survey Information Report
Automotive Current
1998-09-01
AMSC22542 Cleaning Compound, High Pressure Cleaner, Liquid
Aerospace Historical
1998-09-01
J631_199809 Radiator Nomenclature
Automotive Historical
1998-09-01
MAM2251A TOLERANCES, METRIC Low-Alloy Steel Bars
Aerospace Historical
1998-09-01
AMS3901/16A Roving, Organic Fiber (Para-Aramid), High Modulus OR 400 (2758)/22.7 Tensile Strength, 16.5 (114)/935 Tensile Modulus 8520 Denier, (9500 D Tex), 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/17A Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.5 Tensile Strength, 16.5 (114)/950 Tensile Modulus 720 Denier, (800 D Tex), 1.2% Finish
Aerospace Historical
1998-09-01
AMS3901/13A Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.0 Tensile Strength, 16.5 (114)/875 Tensile Modulus 2450 (2720 D Tex) Denier, 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/14A Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/22.3 Tensile Strength, 16.5 (114)/855 Tensile Modulus 2840 (3160 D Tex) Denier, 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/15A Roving, Organic Fiber (Para-Aramid), High Modulus OR 400 (2758)/22.7 Tensile Strength, 16.5 (114)/935 Tensile Modulus 7350 Denier, (8200 D Tex), 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/9B Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 17.5 (121)/970 Tensile Modulus 380 Denier (420 D Tex), 1.2% Finish
Aerospace Historical
1998-09-01
AMS3901/8B Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/22.6 Tensile Strength, 18 (124)/1005 Tensile Modulus 195 Denier (215 D Tex), 1.2% Finish
Aerospace Historical
1998-09-01
AMSQQA250/15A Aluminum Alloy Alclad 7178, Plate And Sheet
Aerospace Historical
1998-09-01
AMSQQA250/22A Aluminum Alloy, 7178-T76, Alclad Plate And Sheet, Improved Exfoliation Resistant
Aerospace Historical
1998-09-01
AMSQQA250/21A Aluminum Alloy, 7178-T76, Plate And Sheet Improved Exfoliation Resistant
Aerospace Historical
1998-09-01
AMSQQA250/25A Aluminum Alloy, Alclad 7075 Plate And Sheet Improved Exfoliation Resistant
Aerospace Historical
1998-09-01
AMSQQA225/1A Aluminum Alloy, Bar, Rod, And Wire, Rolled, Drawn, Or Cold Finished, 1100
Aerospace Historical
1998-09-01
AMSQQA250/28A Aluminum Alloy, 7011 Alclad 7178 Plate And Sheet
Aerospace Historical
1998-09-01
AMSQQA250/26A Aluminum Alloy, 7011 Alclad, 7075 Plate And Sheet
Aerospace Historical
1998-09-01
AMST21014 Tungsten Base Metal, High Density
Aerospace Historical
1998-09-01
AMS3901C Organic Fiber (Para-Aramid), Yarn And Roving, High Modulus
Aerospace Current
1998-09-01
AMS5792A Powder, Plasma Spray 50 (88WC – 12Co) + 35 (70Ni – 16.5Cr – 4Fe – 4Si – 3.8B) + 15 (80Ni – 20A1) Three-Component Mixture
Aerospace Historical
1998-09-01
AMS3901/7C Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/20.9 Tensile Strength, 16.5 (114)/895 Tensile Modulus 2160 Denier, (2400 D Tex), 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/3C Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 16.5 (114)/900 Tensile Modulus 1140 Denier (1270 D Tex), 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/1C Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/22.5 Tensile Strength, 18 (124)/1010 Tensile Modulus 195 (215 D Tex) Denier, 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/6C Roving, Organic Fiber (Para-Aramid), High Modulus OR 500 (3447)/23.5 Tensile Strength, 17.5 (121)/890 Tensile Modulus 4560 Denier, (5070 D Tex), 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/4C Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 16.5 (114)/955 Tensile Modulus 1420 Denier (1580 D Tex), 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/5C Roving, Organic Fiber (Para-Aramid), High Modulus OR 450 (3103)/22.5 Tensile Strength, 17.5 (121)/865 Tensile Modulus 7100 Denier, (7900 D Tex), 0.6% Finish
Aerospace Historical
1998-09-01
AMS3901/11B Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 16.5 (114)/950 Tensile Modulus 1420 (1580 D Tex) Denier, 1.2% Finish
Aerospace Historical
1998-09-01
AMS3901/10B Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 16.5 (114)/945 Tensile Modulus 1140 (1270 D Tex) Denier, 1.2% Finish
Aerospace Historical
1998-09-01
AMS3615E Plastic Tubing Cotton Fabric Reinforced Phenol-Formaldehyde
Aerospace Historical
1998-09-01
AMS3642D Plastic Moldings, Laminated, Thermosetting Resin Glass Cloth Reinforced Heat Resistant
Aerospace Historical
1998-09-01
AMS3628D Plastic Extrusions And Moldings, Polycarbonate General Purpose
Aerospace Historical
1998-09-01
AMS3635D Plastic Sheet And Strip, Modified Vinyl, Foamed Closed Cell
Aerospace Historical
1998-09-01
AMSQQA200/7A Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, And Wire, Extruded
Aerospace Historical
1998-09-01
AMSQQA200/13A Aluminum Alloy 7178, Bar, Rod, Shapes, Tube, And Wire, Extruded
Aerospace Historical
1998-09-01
AMST6841 Tape And Sheet, Adhesive, Rubber And Cork Composition
Aerospace Historical
1998-09-01
AMS3813A Rope, Aramid Fiber, Jacketed For Antenna-Support Systems
Aerospace Historical
1998-09-01
AMS3813/3A Rope, Aramid Fiber, Jacketed Parallel Strand, Braided Jacket
Aerospace Historical
1998-09-01
AMS3813/1A Rope, Aramid Fiber, Jacketed Cabled Strand, Extruded Jacket
Aerospace Historical
1998-09-01
AMS3813/2A Rope, Aramid Fiber, Jacketed Parallel Strand, Extruded Jacket
Aerospace Historical
1998-09-01
AMS3812B Rods, Glass Fiber, Polyester Resin, Loaded Pultrusion
Aerospace Historical
1998-09-01
AMS3753A Microspheres, Carbon Hollow
Aerospace Historical
1998-09-01
AMS3828C Glass Roving, Epoxy Resin Preimpregnated Type E Glass
Aerospace Historical
1998-09-01
AMS3899B Carbon Fiber Tape And Sheet Polysulfone Resin Impregnated
Aerospace Historical
1998-09-01
AMS3612B Polyester Film Electrical Grade, General Purpose
Aerospace Historical
1998-09-01
AMS3619C Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)
Aerospace Historical
1998-09-01
AMS3901/12B Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/21.1 Tensile Strength, 16.5 (114)/900 Tensile Modulus 2160 (2400 D Tex) Denier, 1.2% Finish
Aerospace Historical
1998-09-01
AMSQQA200/6A Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, And Wire, Extruded
Aerospace Historical
1998-09-01
AMS5791A Cobalt Alloy, Powder, Plasma Spray 56.5Co – 25.5Cr – 10.5Ni – 7.5W
Aerospace Historical
1998-09-01