Manufacture of Materials According to Indian Standard I.S Standard And Specifications
Manufacture of Material According to Indian Standard I.S Standard And Specification
1 IS 210:2009 Grey iron castings (fifth revision)
(Superseding IS 6331:1987)
2 IS 1536:2001 Centrifugally cast (spun) iron pressure pipes for water, Jan 2012 4
gas and sewage (fourth revision)
3 IS 1537:1976 Vertically cast iron pressure pipes for water, gas and Aug 2010 6
sewage (first revision)
4 IS 1538:1993 Cast iron fittings for pressure pipes for water, gas and Nov 2009 4
sewage (third revision)
5 IS 1729:2002 Cast iron/ductile iron drainage pipes and pipe fittings for Dec 2012 4
ground non-pressure pipe line socket and spigot series
(second revision)
6 IS 1865:1991 Iron castings with spheroidal or nodular graphite (third Aug 2010
revision)
7 IS 1879:2010 Malleable cast iron pipe fittings (third revision) 3
8 IS 1956(Part 7):1976 Glossary of terms relating to Iron & Steel- Part 7 WroughtAug 2008 2
iron
9 IS 2084:1991 Code for designation of pig iron (second revision) Jan 2012
10 IS 2749:1974 Austenitic iron castings (first revision) Aug 2010
11 IS 3005(Part 1):1979 Grey cast iron ingot moulds, stools and slag ladles Part 1Dec 2012 1
Bottom stools for large size ingot mould weighing 8
tonnes and higher (first revision)
12 IS 3005(Part 2):1979 Part 2 Grey cast iron ingot moulds of mass more than 8 Aug 2010 1
tonnes (first revision)
13 IS 3005(Part 3):1982 Part 3 Grey cast iron ingot moulds of mass more than Aug 2010 1
one tonne and up to 8 tonnes (first revision)
14 IS 3005(Part 4):1984 Part 4 Grey cast iron ingot moulds of mass up to 1 tonne Aug 2010 1
(first revision)
15 IS 3355:1974 Grey iron castings for elevated temperatures for non- Aug 2010
pressure containing parts (first revision)
16 IS 3516:1966 Cast iron pipe flanges and flanged fittings for petroleum Aug 2010 1
industry
17 IS 3896:1961 Comparison of Indian and overseas standards for iron Aug 2010
castings
18 IS 3896(Part 1):1978 Comparison of Indian and overseas standards for iron Aug 2010
castings Part 1 Grey iron castings (first revision)
19 IS 3896(Part 2):1985 Comparison of Indian and overseas standards for iron Aug 2010
castings (first revision) Part 2 Spheroidal Graphite Iron
Castings
20 IS 3989:2009 Centrifugally cast (spun) iron spigot and socket 2
soil,waste ventilating and rain water pipes, fittings, and
accessories (third revision)
21 IS 4771:1985 Abrasion-resistant iron castings (second revision) Aug 2010
22 IS 5519:1979 Deviations for untoleranced dimensions and mass of Aug 2010
grey iron castings (first revision)
23 * IS 5531:1988 Cast iron specials for asbestos-cement pressure pipes Dec 2012
for water, gas and sewage (second revision)
24 IS 5787:1986 Spheroidal or nodular graphite iron castings for paper mill Jan 2012 1
dryer rolls (first revision)
25 IS 5788:1986 Iron castings with spheroidal or nodular graphite for Aug 2010 1
pressure containing partsfor use at elevated
temperatures (first revision)
26 IS 5789:1993 Austenitic spheroidal graphite iron casting for pressure Nov 2009
containing parts suitable for low-temperature service
(first revision)
27 IS 6418:1971 Cast iron and malleable cast iron flanges for general Aug 2010
engineering purposes
28 IS 6629:1972 Cast iron rolls Aug 2010
29 IS 7181:1986 Horizontally cast iron double flanged pipes for water, Aug 2010 3
gas and sewage (first revision)
30 IS 7520:1974 Corrosion resistant high silicon iron castings Aug 2010
31 IS 7925:1976 Low alloy types of abrasion resistant iron castings Nov 2009
32 * IS 8329:2000 Centrifuglly cast (spun) ductile iron pressure pipes for Aug 2010 2
water, gas and sewage (third revision)
33 IS 8349:1977 Deviations for untoleranced dimensions of malleable iron Aug 2010
castings
34 IS 8350:1977 Deviations for untoleranced dimensions of spheroidal or Aug 2010 1
nodular graphite iron castings
35 IS 8794:1988 Cast iron detachable joints for use with asbestos cement Dec 2012 2
pressure pipes (first revision)
36 IS 9321:1979 Material for alloy cast iron valve seat inserts Aug 2010
37 * IS 9523:2000 Ductile iron fittings for pressure pipes for water,gas and Aug 2010 3
sewage (first revision)
38 IS 9630:1980 Recommended practice for production of spheriodal Nov 2009 1
graphite
39 IS 10207:1982 Methods of sampling grey iron and malleable iron castingsAug 2010
40 IS 10292:1988 Dimensional requirements for rubber sealing rings for Dec 2012
C.I.D. joints in asbestoscement piping (first revision)
41 IS 10299:1982 Cast iron saddle pieces for service connection from Aug 2010
asbestos cement pressure pipes
42 IS 11606:1986 Methods of sampling cast iron pipes & fittings Aug 2010
43 IS 12820:2004 Dimensional requirements of rubber gaskets for Nov 2009 2
mechanical joints and push-on joits for use with cast iron
pipes and fittings for carrying water, gas and sewage
(first revision)
44 IS 12987:1991 Cast iron detachable joints for use with asbestos cement Aug 2010
pressure pipes (light duty)
45 IS 12988:1991 Dimensional requirements for rulbber sealing rings for Aug 2010
CID joints in asbestos cement piping for light duty AC pipes
46 * IS 13382:2004 Cast iron specials for mechanical and push-on flexible Nov 2009
joints for pressure pipelines for water, gas and sewage
- Specification (first revision)
47 IS 13502:1992 Pig iron Aug 2010
48 IS 14329:1995 Malleable iron castings Aug 2010
49 IS 15338:2003 Spectrometric analysis of cast iron by direct reducing Aug 2008
optical emission vacuum spectrometer – Point to plane
technique
50 IS 15905:2011 Hubless centrifugally cast (spun) iron pipes, fittings and
accessories – spigot series – Specification
1 DOC.MTD 6(5028) Specification for Abrasion resistant iron castings (third
revision of IS 4771)
1 DOC.MTD 6(5029) Cast iron specials for asbestos cements pressure pipes
for water and sewage – Specification (third revision of IS
5531)
2 DOC.MTD 6(5203) Cast iron specials for mechanical and push-on flexible
joints for pressure pipelines for water, gas and sewage - Specification (second revision of IS 13382)
1 SP 1 : 1967 Comparision of Indian and overseas standards on Dec 2012
aluminium alloy castings
2 IS 21:1992 Wrought aluminium and aluminium alloys for manufacture Dec 2011 1
of utensils (fourth revision)
3 IS 23:1980 Primary aluminium ingots for remelting for aircraft Dec 2011
purposes (third revision)
4 IS 202:1981 Aluminium casting alloy ingots and casting for aircraft Dec 2011 1
purposes (third revision)
5 IS 617:1994 Aluminium and aluminium alloy ingots and castings for Mar 2010 1
general engineering purposes (third revision)
(Superseded IS 20:1977)
6 IS 733:1983 Wrought aluminium and aluminium alloy bars, rods and Dec 2011 1
sections for general engineering purposes (third revision)
7 IS 734:1975 Wrought aluminium and aluminium alloys,forging stock Dec 2011
and forgings for general engineering purposes (second
revision)
8 IS 736:1986 Wrought aluminium and aluminium alloy plate for general Dec 2011
engineering purposes (third revision)
9 IS 737:2008 Wrought aluminium and aluminium alloy sheet and strip Dec 2012
for general engineering purposes (fourth revision)
10 IS 738:1994 Wrought aluminium alloys, drawn tube for general Mar 2010
engineering purposes (third revision)
11 IS 739:1992 Wrought aluminium and aluminium alloy wire for general Dec 2011
engineering purposes (third revision)
12 IS 740:1977 Wrought aluminium and aluminium alloy rivet stock for Dec 2011
general engineering purposes (second revision)
13 IS 1253:1992 Aluminium for use in iron and steel manufacture (third Dec 2011
revision)
14 IS 1254:2007 Corrugated aluminium sheet (fourth revision) Dec 2011
15 IS 1284:1975 Wrought aluminium alloy bolt and screw stock for generalDec 2011
engineering purposes (second revision)
16 IS 1285:2002 Wrought aluminium and aluminium alloys – Extruded Dec 2012
round tube and hollow sections for general engineering
purposes (third revision)
17 IS 1820:1979 Recommended shapes and sizes for aluminium notched Dec 2011
bars and ingots for remelting purposes (first revision)
18 IS 2047:1992 Aluminium alloy hardeners (Master alloys) (second Dec 2011 1
revision)
19 IS 2066:1962 Coding and classification for non-ferrous scrap metals Mar 2010
and residues
20 IS 2067:1975 Wrought aluminium wire for electrical purposes (first Dec 2012 1
revision)
21 IS 2304:1962 Procedure for inspection and testing of light metals Dec 2011
(aluminium and magnesium) and their alloy ingots and
castings for aircraft purposes
22 IS 2479:1981 Colour code for the identification of aluminium and Dec 2011
aluminium alloys for general engineering purposes
(second revision)
23 IS 2525:1982 Dimensions for wrought aluminium and aluminium alloys, Dec 2011
wire (first revision)
24 IS 2590:1987 Primary aluminium ingots for remelting for general Dec 2011
engineering purposes (second revision)
25 IS 2673:2002 Dimensions for wrought aluminium and aluminium alloys Dec 2012
extruded round tube (second revision)
26 IS 2676:1981 Dimension for wrought aluminium and aluminium alloy Dec 2011
sheet and strip (first revision)
27 IS 2677:1979 Dimensions for wrought aluminium and aluminium alloys, Dec 2011
plates and hot rolled sheets (first revision)
28 IS 2678:1987 Dimensions and tolerances for wrought aluminium and Dec 2011
aluminium alloy drawn roundtube (second revision)
29 IS 3420:1976 Procedure for inspection and testing of aluminium alloy Dec 2011
sheets and strips for aircraft purposes (first revision)
30 IS 3436:1978 Aluminium clad aluminium alloy sheet and strip for Dec 2011
aircraft purposes (Alloy 24345) (first revision)
31 IS 3577:1992 Wrought aluminium and aluminium alloys rivet, bolt and Dec 2011
screw stock – Dimensionsand tolerances (first revision)
32 IS 3704:1966 Methods for sampling of light metals and their alloy Dec 2011
products
33 IS 3965:1981 Dimensions for wrought aluminium and aluminium alloy Dec 2011 1
bar, rod and section (first revision)
34 IS 4026:2007 Aluminium ingots billets and wire bars (EC grade) (fourth Dec 2011
revision)
35 IS 5047(Part 1):1986 Glossary of terms relating to aluminium and aluminium Dec 2011
alloys Part 1 Unwrought and wrught metals (second
revision)
36 IS 5047(Part 2):1979 Part 2 Plant and operations, thermal treatment, control Dec 2011
and testing, finishing
37 IS 5047(Part 3):1979 Part 3 Geometric properties and toolerances, structural Dec 2011
and surface defects
38 IS 5052:1993 Aluminium and its alloys – Temper designations (first Dec 2012
revision)
39 IS 5082:1998 Wrought aluminium and aluminium alloy bars, rods, tubes Dec 2012 2
and sections for electrical applications (second revision)
40 IS 5484:1997 EC grade aluminium rod produced by continuous casting Dec 2011 1
and rolling (first revision)
41 IS 6051:1970 Code for designation of aluminium and its alloys Mar 2010
42 IS 6477:1983 Dimensions for wrought aluminium and aluminium alloys, Mar 2010
extruded hollow section (first revision)
43 IS 6694:1999 Magnesium ingot for remelting (second revision) Mar 2010
44 IS 6751:1972 Aluminium alloy castings and strips for bearings Mar 2010
45 IS 6754:1972 Aluminium alloy ingots for bearings Mar 2010
46 IS 7092(Part 1):1992 Aluminium alloy tubes for irrigation purposes Part 1 Dec 2011
Welded tubes (second revision)
47 IS 7092(Part 2):1987 Part 2 Extruded tubes (second revision) Dec 2011 2
48 IS 7428:1974 Aluminium alloy extruded bars, rods and sections (for Dec 2011
aircraft purposes) (Alloy24345)
49 IS 7429:1974 Procedure for inspecction and testing of aluminium and Dec 2011
aluminium alloy extrudedbars, rods and sections (for
aircraft purposes)
50 IS 7670:2002 Aluminium alloy forging stock and forgings (for parts Dec 2012
operated at elevated temperatures) for aerospace
applications (Alloy 22588) (first revision)
51 IS 7674:1975 Procedure for inspection and testing of aluminium and Dec 2011
aluminium alloy forging stock and forgings for aircraft
purposes
52 IS 7793:1975 Aluminium alloys for IC engine pistons Dec 2011 1
53 IS 7882:1975 Aluminium alloy sheet and strip for aircraft purposes Mar 2010
(Alloy 19000)
54 IS 7883:1975 Aluminium-manganese sheet and strip for aircraft Mar 2010
purposes (Alloy 31000)
55 IS 7902:2001 Aluminium alloy forging stock and forgings (Alloy 24345) Dec 2012
for aircraft purposes (first revision)
56 IS 8474:1977 Procedure for inspection and testing of aluminium and Dec 2011
aluminium alloy wires (for rivets) for aircraft purposes
57 IS 8513:1977 Aluminium alloy wire for cold forged rivets for aircraft Mar 2010 1
purposes (Alloy 55000)
58 IS 8514:1977 Aluminium alloy wire for cold forged rivets for aircraft Mar 2010 1
purposes (Alloy 24530)
59 IS 8515:1977 Aluminium wire for cold forged rivets for aircraft Mar 2010 1
purposes (Alloy 19500)
60 IS 8560:1977 Aluminium clad aluminium alloy sheet and strip for aircraftMar 2010
purposes (Alloy 24530)
61 IS 8561:1977 Aluminium alloy clad sheet and strip for aircraft purposes Mar 2010
(Alloy 76528)
62 IS 8936:1978 Aluminium alloy for wire for cold forged rivets for aircraft Dec 2011
purposes (Alloy 24350)
63 IS 8937:1978 Aluminium alloy wire for cold forged rivets for aircraft Mar 2010
purposes (Alloy 22500)
64 IS 8938:1978 Aluminium alloy wire for cold forged rivets for aircraft Mar 2010
purposes(Alloy 24345)
65 IS 9612:1980 Aluminium tubes for refrigeration purposes Dec 2011
66 IS 9997:1991 Aluminium alloy redraw rods for electrical purposes (first Dec 2011 1
revision)
67 IS 10257:1982 Aluminium foil stock Mar 2010
68 IS 10259:1982 General conditions for delivery and inspection of Mar 2010
aluminium and aluminium alloyproducts
69 IS 11804:1986 Code of practice for manufacture of aluminium alloy Dec 2011
pressure die castings
70 IS 11861:1986 Titanium and titanium alloy strip, sheet and plate Mar 2010
71 IS 11890:1987 High purity aluminium ingot for remelting for special Dec 2011
applications
72 IS 11901:1986 Titanium sponge Mar 2010
73 IS 11902:1986 Titanium and titanium alloy bars and billets Mar 2010
74 IS 11998:1987 Aluminium for the manufacture of alloys for IC engine Dec 2011
pistons
75 IS 12389:1988 Seamless and welded titanium and titanium alloy fitting Mar 2010
76 IS 12442:1988 Seamless and welded titanium and titanium alloy tubes Mar 2010
for condensers and heat exchangers
77 IS 12644:1989 Titaniium and titanium alloy pipe, seamless and welded Mar 2010
78 IS 12828:1989 Recommended practice for descaling and cleaning Mar 2010
titanium and titanium alloy surfaces
79 IS 14712:1999 Wrought Aluminium and its alloy chequered tread sheetsMar 2010 1
for general engineeringpurposes
80 IS 15392:2003 Aluminium & Aluminium alloy bare foil for food packaging Dec 2012
| ISO 7271:1982
81 IS 16011:2012 Aluminium and Aluminium alloy foil for pharmacentical Nov 2012
packaging
82 IS 16012:2012 Poly laminated aluminium cable wrap Nov 2012
1 DOC.MTD 7(5204) Amendment No. 1 to IS 15392:2003
1 IS 28:1985 Phosphor bronze ingots and castings (fourth revision) Apr 2011 1
2 IS 191:2007 Copper (fourth revision) Apr 2011
3 IS 288:1981 Arsenical copper rods for boiler stay bolts and rivets Apr 2011 1
(second revision)
4 IS 291:1989 Naval brass rods and sections for machining purposes Apr 2011
(third revision)
5 IS 292:1983 Leaded brass ingots and castings (second revision) Apr 2009 1
6 IS 304:1981 High tensile brass ingots and castings (second revision) Apr 2011
7 IS 305:1981 Aluminium bronze ingots and castings (second revision) Apr 2011
8 IS 306:1983 Tin bronze ingots and castings (third revision) Apr 2009 1
9 IS 318:1981 Leaded tin bronze ingots and castings (second revision) Apr 2011 2
10 IS 319:2007 Free cutting brass bars, rods and sections (fifth revision) Feb 2012
11 IS 320:1980 High tensile brass rods and sections (other than forgings Apr 2011 1
stock) (second revision)
12 IS 407:1981 Brass tubes for general purposes (third revision) Apr 2011 2
13 IS 410:1977 Cold rolled brass sheet, strip and foil (third revision) Apr 2011 1
14 IS 422:1981 Brass sheet and strip for the manufacture of utensils Apr 2011
(second revision)
15 IS 531:1981 Leaded brass strips for instrument parts (second Apr 2011
revision)
16 IS 613:2000 Copper rods and bars for electrical purposes (third Apr 2011 1
revision)
17 IS 1028:1987 Silicon bronze ingots and castings (second revision) Apr 2009
18 IS 1264:1997 Brass gravity die castings (ingots and castings) (fourth Apr 2009 1
revision)
19 IS 1408:1968 Recommended procedure for inspection of copper-base Apr 2011
alloy sand castings (first revision)
20 IS 1458:1965 Railway bronze ingots and casting (revised) Apr 2011 4
21 IS 1545:1994 Solid drawn copper and copper alloy tubes for Apr 2011
condenser and heat exc hangers – Specification (third
revision)
22 IS 1897:2008 Copper strip for electrical purposes (third revision) Nov 2008
23 IS 2283:2000 Nickel silver sheet, strip and foil (second revision) Apr 2011
24 IS 2305:1988 Method for mercurous nitrate test for copper and copper Apr 2009
alloys (first revision)
25 IS 2376:1963 Colour code for the identification of copper & copper Apr 2011
alloys
26 IS 2378:1974 Code for designation of copper and copper alloys (first Apr 2011
revision)
27 IS 2451:1994 Nickel silver ingots and castings for cutlery and hollow- Apr 2011 1
ware (first revision)
28 IS 2501:1995 Solid drawn copper tubes for general engineering Apr 2011
purposes (third revision)
29 IS 2704:1983 Brass wires for cold-headed and machined parts (first Apr 2009 1
revision)
30 IS 2768:1982 Copper alloy strip for bullet envelope (first revision) Apr 2009
31 IS 2826:1986 Dimensions and tolerances for copper and copper alloy Apr 2011
rods and bars for generalengineering purposes (third
revision)
32 IS 3051:1988 Dimensions and tolerances for wrought copper and Apr 2011
copper alloy plate (first revision)
33 IS 3052:1986 Dimensions and tolerances for wrought copper and Apr 2011
copper alloy sheet, strip and foil for general engineering
purposes (second revision)
34 IS 3091:1999 Aluminium bronze ingots and castings for overhead Apr 2009
fittings in electrical traction (First Revision)
35 IS 3167:1982 Cap copper alloy strip (first revision) Apr 2009
36 IS 3168:1981 Brass strip and foil for deep drawing (first revision) Apr 2011
37 IS 3288(Part 1):1986 Glossary of terms for copper and copper alloys Part 1 Apr 2011
Materials (third revision)
38 IS 3288(Part 2):1986 Part 2 Unwrought form and cast form Apr 2011
39 IS 3288(Part 3):1986 Part 3 Wrought forms Apr 2011
40 IS 3288(Part 4):1986 Part 4 Processing Apr 2011
41 IS 3288(Part 5):1986 Part 5 Heat treatment Apr 2011
42 IS 3288(Part 6):1986 Part 6 Finishes Apr 2011
43 IS 3288(Part 7):1986 Part 7 Dimensional surfaces and structural characterstics Apr 2011
44 IS 3288(Part 8):1986 Part 8 Packing Apr 2011
45 IS 3331:2007 Copper and brass strips/foils for radiator cores (second Nov 2007
revision)
46 IS 4076:1983 Hard brass wires for springs and other special purposes Apr 2009 1
(first revision)
47 IS 4131:1967 Nickel copper alloy castings Apr 2011
48 IS 4170:1967 Brass rods for general engineering purposes Apr 2011 2
49 IS 4171:1983 Copper rods and bars for general engineering purposes Apr 2009 1
(first revision)
50 IS 4412:1981 Copper wires for general engineering purposes (first Apr 2011 1
revision)
51 IS 4413:1981 Brass wires for general engineering purposes (first Apr 2011 1
revision)
52 IS 4519:1977 Dimensions for copper commutator bars (first revision) Apr 2011
53 IS 5053:1969 Dimensions for wrought copper and copper alloy rods Apr 2011
for fasteners
54 IS 5493:1981 Dimensions for wrought copper and copper alloy tubes Mar 2011
(first revision)
55 IS 5743:1991 Copper master alloys – (first revision) Apr 2011
56 IS 5744:1991 Copper alloy screwed ferrules for condenser, heater Apr 2011 1
and cooler tubes (first revision)
57 IS 5885:1977 Copper for commutator bars (first revision) Apr 2011
58 IS 6912:2005 Copper and copper alloy forging stock and forgings May 2010
(second revision) (Superseding IS 3488:1980)
59 IS 7608:1987 Phosphor bronze wire for general engineering purposes Apr 2011 1
(first revision)
60 IS 7811:1985 Phosphor bronze rods and bars (first revision) Apr 2011 4
61 IS 7814:2005 Phosphor bronze sheet and strip (second revision) May 2010
62 IS 8328:2007 Free cutting copper bars, rods and sections (first Feb 2012
revision)
63 IS 8362:1977 Copper and copper alloy rolled plates for condensers Apr 2011
and heat exchangers
64 IS 8364:1989 Free cutting brass wire (first revision) Apr 2011
65 IS 8365:1991 Copper alloys for spot and seam resistance welding Apr 2011
electrodes (first revision)
66 IS 8631:1977 Copper base alloys for marine propellers Apr 2011
67 IS 8859:1978 Cast copper tuyere Apr 2011
68 IS 9682:1980 Recommended procedure for inspection of cast copper Apr 2011
tuyeres
69 IS 9713:1983 Hot rolled electrolytic copper wire rod for electrical Apr 2009
conductors (first revision)
70 IS 9805:1981 High conductivity copper castings Apr 2011
71 IS 9861:1981 Dimensions for wrought copper and copper alloy wires Apr 2011
for general engineering purposes
72 IS 10569:2005 Aluminnium bronze rods and bars (first revision) May 2010
73 IS 10709:1983 Brass wires for fourdrinier cloth Apr 2009 1
74 IS 10710:1983 Phosphor bronze wires used for fourdrinier cloth Apr 2009 2
75 IS 10742:1983 Cast gun metal rods and bars Apr 2009 1
76 IS 10757:1983 Nickel silver rods and bars Apr 2009 1
77 IS 10773:1995 Copper tubes for refrigeration purposes (first revision) Apr 2011
78 IS 11109:1984 Silicon brass ingots and castings Apr 2011
79 IS 12228:1987 Method for scale adhesion test for oxygen free copper Apr 2011 / ISO 4746 : 197780 IS 12443:1988 Rolled brass plates for general engineering purposes Apr 2009
81 IS 12444:1988 Continuously cast and rolled electrolytic copper wire Apr 2009 2
rods for electrical conductors
82 IS 12558:1988 Recommended shape, size and mass of copper and Apr 2009
copper alloy ingots for remelting purposes
83 IS 14340:1996 Brass for current carrying parts in electrical wiring Apr 2011
accessories
84 IS 14810:2000 Copper tubes for plumbing Apr 2011
85 IS 14811:2000 Rolled copper plate, sheet, strip and coils for general Apr 2011
engineering purposes (Superseding IS 1550, IS 1972 & IS 3487)
1 DOC.MTD 8(4984) Phosphor bronze rods and bars ( second revision of IS
7811)
2 DOC.MTD 8(5092) Continuously cast and rods electrolytic copper and
oxygen free copper (OFC) wire rods for electrical
conductors (first revision of IS 12444)
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com