Manufacture of Materials According to Indian Standard I.S Standard And Specifications
Manufacture of Material According to Indian Standard I.S Standard And Specification
1 DOC.MTD 3(5116) Metallic materials – Tensile testing – Part 1: Method of test
at room temperature (fourth revision of IS 1608 (Pt 1)
(Based on ISO 6892-1:2009)
2 DOC.MTD 3(5118) Metallic material – Vickers hardness test – Part 1 Test
method (fourth revision of IS 1501(Pt 1) (Based on ISO
6507-1:2005)
3 DOC.MTD 3(5119) Metallic material – Vickers hardness test – Part 2:
Verification and calibration of testingmachines (fourth
revision of IS 1501 (Pt 2) (Based on ISO 6507-2:2005)
4 DOC.MTD 3(5120) Metallic material – Vickers hardness test – Part 3
Calibration of reference blocks (fourth revision of IS
1501 (Pt 3) (Based on ISO 6507-3:2005)
5 DOC.MTD 3(5121) Metallic material – Vickers hardness test – Part 4; Table of
hardness values (fourth revision of IS 1501 (Pt 4)
(Based on ISO 6507-4:2005)
6 DOC.MTD 3(5122) Metallic material – Brinell hardness test – Part 1: Test
method(fourth revision of iS 1500 (Pt 1) (Based on ISO
6506-1:2005)
7 DOC.MTD 3(5123) Metalic material – Brinell hardness test – Part 2:
Verification and calibration of testing machines (fourth
revision of IS 1500 (Pt 2) (Based on ISO 6506-2:2005)
8 DOC.MTD 3(5124) Metallic material – Briness hardness test – Part 3:
Calibration of reference blocks (fourth revision of IS
1500 (Pt 3) (Based on ISO 6506-3:2005)
9 DOC.MTD 3(5125) Metallic material – Brinell hardness test – Part 4: Table of
hardness values (fourth revision of IS 1500 (Pt 4)
(Based on ISO 6506-4:2005)
1 DOC.MTD 3(5117) Metallic materials – Tensile testing – Part 2; Method of test
at elevated temperature (fourth revision of IS 1608 (Pt 2)
(Based on ISO 6892-2:2011)
2 DOC.MTD 3(5127) Metallic mateirals – Charpy pendulum impact test Part 1-
Test method (third revision of IS 1757(Pt 1) (based on
ISO 148-1:2009)
3 DOC.MTD 3(5128) Metallic materials – Charpy – Pt 2: Verification of testing
machines (third revision of IS 1757(Pt 2) (based on ISO
148-2:2008)
4 DOC.MTD 3(5129) Pt 3 Preparation and characterization of charpy v-notch
test pieces for direct verification of pendulum impat test
(third revision of IS 1757(Pt 3) (based on ISO 148-3:2008)
5 DOC.MTD 3(5130) Metallic materials – Calibration of force proving
instruments used for the verification of uniaxial testing
machiens (second revision of IS 4169) (based on ISO
376:2011)
6 DOC.MTD 3(5131) Metallic materials – Verification of static uniaxial testing
machines – Part I: Tension/compression testing machines
- Verification and calibration of the force-measuring
system (first revision of IS 1828 (Pt 1) (based on ISO
7500-1:2004)
7 DOC.MTD 3(5132) Metallic materials – Verification of static uniaxial testing
machines – Pt 2 Tension creep testing machines –
Verification of the applied force (first revision of IS
1828(Pt 2) (based on ISO 7500-2:2006)
8 DOC.MTD 3(5134) Metallic mateials – Sheet and Strip – Determination of
plastic strain ratio (second revision of IS 11999) (based
on ISO 10113:2006)
9 DOC.MTD 3(5135) Metallic materials – Sheet and strip – determination of
tensile strain hardening exponent (first revision of IS
15756) (based on ISO 10245:2007)
1 SP 14 : 1976 Index to classification of steel Feb 2013
2 SP 17 : 1979 Index to glossary of terms relating to iron and steel Feb 2013
3 SP 71 : 2012 Compendium of method of chemical analysis of steels May 2012
4 IS 277:2003 Galvanized steel sheet (plain and corrugated )(sixth Feb 2013 4
revision)
5 IS 279:1981 Galvanized steel wire for telegraph and telephone Nov 2009 2
purposes (third revision)
6 IS 280:2006 Mild steel wire for general engineering purposes (fourth Sep 2010 1
revision)
7 IS 412:1975 Expanded metal steel sheets for general purposes Mar 2012 1
(second revision)
8 IS 513:2008 Cold- reduced low carbon steel sheets and strips (fifth 13 2002 1
| ISO 3574:1999 revision)
9 IS 648:2006 Cold rolled non-oriented electrical steel sheet and strip – Mar 2011 5
| IEC 60404-8-4:1998 Fully processed type – Specification (fifth revision)
10 IS 649:1997 Methods of testing steel sheets for magnetic circuits of Mar 2012 3
| IEC 404-2:1978 power electrical apparatus (second revision)
11 IS 1029:1970 Hot-rolled steel strip (baling) (first revision) Feb 2013 2
12 IS 1079:2009 Hot-rolled carbon steel sheet and strip (sixth revision) Aug 2009 1
| ISO 3573:1999
13 IS 1136:2008 Preferred sizes for wrought metal products (third Feb 2013
revision)
14 IS 1148:2009 Hot-rolled rivet bars (upto 40 mm dia) for structural May 2011
purposes (fourth revision) (superseding IS 1149:1982)
15 IS 1387:1993 General requirments for the supply of metallurgical Feb 2013
materials (second revision)
16 IS 1673:1984 Mild steel wire cold heading quality (second revision) Sep 2010
17 * IS 1762(Part 1):1974 Code for designation of steels, Part I Based on lettter Feb 2013
symbols (first revision)
18 IS 1812:1982 Carbon steel wire for the manufacture of wood screws Mar 2012
(second revision)
19 IS 1835:1976 Round steel wire for ropes (third revision) Mar 2012 2
20 * IS 1956(Part 2):1976 Glossary of terms relating to iron and steel Part 2 Steel Feb 2013
making (first revision)
21 * IS 1956(Part 3):1975 Hot rolled steel products (excluding sheet and strip) (first Feb 2013 3
revision)
22 * IS 1956(Part 4):1975 Steel sheet and strip (first revision) Feb 2013 4
23 IS 1956(Part 5):1976 Bright steel bar and steel wire Feb 2013 3
24 IS 1990:2009 Steel rivet and stay bars for boilers (second revision) Apr 2009
25 IS 1993:2006 Cold reduced electrolytic tin plate (fourth revision) Sep 2010 1
/ ISO 11949:1995
26 IS 2002:2009 Steel plates for pressure vessels for intermediate & high Feb 2013 1
temperature service including boilers (third revision)
27 IS 2041:2009 Steel plates for pressure vessels used at moderate and Feb 2013
low temperature (third revision)
28 IS 2049:1978 Colour code for the identification of wrought steels for Feb 2013 1
general engineering purposes (first revision)
29 IS 2062:2011 Hot rolled medium and high tensile structural steel Sep 2011 1 (seventh revision)
30 IS 2100:1970 Steel billets, bars and sections for boilers (first revision) Mar 2012
31 IS 2255:1977 Mild steel wire rod for the manufacture of machine Mar 2012 1
screws (by cold heading process)(second revision)
32 IS 2385:1977 Hot-rolled mild steel sheet and strip in coil form for cold- Mar 2012 1
reduced tinplate and cold-reduced blackplate (first revision )
33 IS 2507:1975 Cold-rolled steel strips for springs (first revision) Sep 2010 2
34 IS 2549:1994 Code of classification of processed ferrous scrap (first Feb 2013 3 revision)
35 IS 2589:1975 Hard drawn steel wire for upholstery springs (first Mar 2012 1 revision)
36 IS 2591:1982 Dimensions for hot rolled bars for threaded components Mar 2012 (second revision)
37 IS 2830:2012 Carbon steel cast billet ingots,billets,blooms and slabs for Apr 2012 1
re-rolling into steel for general structural purposes (third revision)
38 IS 2831:2012 Carbon steel cast billet ingots, billets, blooms and slabs Apr 2012
for re-rolling into structural steel (ordinary quality)
(fourth revision)
39 IS 2879:1998 Mild steel for metal arc welding electrodes (fourth Feb 2013 1
revision)
40 IS 3024:2006 Grain orinted electrical steel sheet and strip (second Sep 2010 3
| IEC 60404-8-7:1998 revision)
41 IS 3039:1988 Structural steel for construction of hulls of ships(second Mar 2012
revision)
42 IS 3195:1992 Steel for the manufacture of volute and helical springs Mar 2012 2
(for railway rolling stock) (third revision)
43 IS 3298:1981 Mild steel rivet bars for shipbuilding (first revision) Mar 2012
44 IS 3431:1982 Steel for the manufacture of volute, helical and laminated Mar 2012 2
springs for automotive suspension (second revision)
45 IS 3502:2009 Steel chequered plates (third revision) May 2011
46 IS 3885(Part 1):1992 Steel for the manufacture of laminated springs (railway Mar 2012 1
rolling stock) Part 1 Flat Sections (second revision)
47 IS 3885(Part 2):1992 Steel for manufacture of laminated springs (railway Mar 2012 1
rolling stock) Part 2 Rib and groove sections (second
revision)
48 IS 3975:1999 Low carbon galvanized steel wires, formed wires and Nov 2009
tapes for armouring of cables (fourth revision)
49 IS 4072:1975 Steel for spring washers (first revision) Mar 2012 2
50 IS 4223:1975 Steel wire for umbrella ribs (first revision) Mar 2012
51 IS 4224:1972 Steel wire for office staples, pins and clips (first revision) Mar 2012 1
52 IS 4454(Part 1):2001 Steel wires for mechanical springs, Part 1 Cold drawn Sep 2010
| ISO 8458-1&2:1998 steel unalloyed steel wire (third revision)
53 IS 4454(Part 2):2001 Part 2 Oil hardened and tempered steel wire (second Sep 2010
| ISO 8458-3:1998 revision) (Superseding IS 4454(Pt 3):1975)
54 IS 4454(Part 4):2001 Part 4 Stainless steel wire (second revision) Sep 2010 1
| ISO 6931-1:1989
55 IS 4824:2006 Bead wire for tyres (second revision) Mar 2012
56 IS 5478:1969 Thermostat metal sheet and strip Feb 2013
57 IS 5872:1990 Cold rolled steel strips (box strappings) (second revision) Sep 2010
58 IS 5986:2011 Hot rolled steel flat products for structural forming and Sep
2011
| ISO 20805:2005 flanging purposes (third revision)
59 IS 6240:2008 Hot rolled steel plate (up to 6mm ) sheet and strip for the Feb 2013
manufacture of low pressure liquifiable gas cylinder
(fourth revision)
60 IS 6902:1973 Steel wire for spokes Mar 2012 2
61 IS 6967:1973 Steel for electrically welded round link chains Mar 2012
62 IS 7072:1973 Glossary of terms relating to emission spectroscopy Mar 2012
63 IS 7226:1974 Cold rolled medium, high carbon and low alloy steel strip Mar 2012
for general engineering purposes
64 IS 7283:1992 Hot rolled bars for production of bright bars and Mar 2012
machined parts for enginner ing applications (first
revision)
65 IS 7452:2002 Hot-rolled structural steel plates – Tolerances on Feb 2013
/ ISO dimensions and shape
66 IS 7557:1982 Steel wire (upto 20 mm) for the manufacture of cold Mar 2012
forged rivets (first revision)
67 IS 7598:1990 Classification of steels (first revision) Feb 2013
| ISO 4948(Pt 1 & 2)
68 IS 7887:1992 Mild steel wire rods for general engineering purposes Mar 2012 1
(first revision)
69 IS 7904:1995 High carbon steel wire rods (first revision) Mar 2012
70 IS 8052:2006 Steel ingots,billets and blooms for the production of Mar 2011
spings, rivets and screws for general engineering
applications – Specification (second revision)
71 IS 8510(Part 1-3):1977 Tinned steel wire for banding of armatures and rotors Mar 2012
72 IS 8563:1977 Half round mild steel wire for the manufacture of split pinsMar 2012
73 IS 8564:1977 Steel wire for nipples for spokes Mar 2012
74 IS 8565:1977 Heald wire Mar 2012
75 IS 8566:1977 Steel wire for reeds Mar 2012
76 IS 8910:2010 General technical delivery requirements for steel and Feb 2010
/ ISO 404:1992 steel products (first revision)
77 IS 8917:1978 Steel plates for galvanizing pots Mar 2012
78 IS 8951:2001 Steel cast-billet ingots ,billets and blooms for production Sep 2010
of high carbon steel wire rods -Specification (first
revision)
79 IS 8952:1995 Steel ingots,blooms and billets for production of mild steelSep 2010
wire rods for general engineering purposes (first
revision)
80 IS 9442:1980 Hot rolled steel plates, sheets and strips for manufacture Mar 2012
of agricultural tillage discs
81 IS 9476:1980 Cold rolled steel strips for carbon steel razor blades Mar 2012
82 IS 9485:1980 Cold-reduced and hot-rolled carbon steel sheet for Mar 2012
porcelain enamelling
83 IS 9550:2001 Bright steel bars (first revision) Sep 2010
84 IS 9962:1981 Steel wires for needles Mar 2012 1
85 IS 10206:1982 Methods of sampling steel wires Feb 2013
86 IS 10340:1982 Glossary of terms for cold-reduced tinplate and cold- Feb 2013 1
reduced blackplate
87 IS 10474:1991 Steel & Steel products – Inspection Documents Jan 2010
/ ISO
88 IS 10748:2004 Hot-rolled steel strip for welded tubes and pipes (second Nov 2009 1
revision)
89 IS 10794:1984 Mild steel wire for cottor pins Mar 2012
90 IS 11513:2011 Hot-rolled carbon steel strip for cold rolling purpose (first Sep 2011
revision)
91 IS 11587:1986 Structural weather resistant steels Mar 2012
| ISO 4952:2003
92 IS 11951:1995 Cold reduced blackplate in coil form for the prod of Apr 2009
/ ISO tinplate or electroytic chromium/chromium oxide- coated
steel
93 IS 12262:1988 Trapezoidal steel wires for spring washers Mar 2012
94 IS 12313:1988 Hot dip terene coated carbon steel sheet Mar 2012 1
| ISO 4999:2005
95 IS 12367:1988 Cold-rolled carbon steel strips/coils for manufacture of Mar 2012
welded tubes
96 IS 12457:1988 Code of practice for evaluation repairs and acceptance Mar 2012
| ISO 7788:1985 limits of surface defects in steel plates, and wide flats
97 IS 12591:2006 Cold-reduced electrolytic chromium/chromium oxide Mar 2012 1
/ ISO 11950:1995 coated steel (first revision)
98 IS 13566:1992 Recommended practice of pickling by H2SO4 levelling Mar
2012
and oiling of LPG sheets
99 IS 13752:1993 Guidelines for reporting sequence of elements in steel & Feb 2013
pig iron and mechanical properties in steel
100 * IS 14246:1995 Continuously pre-painted galvanised steel sheets and Sep 2010
coils
101 IS 14284:1996 Steel and iron sampling and preparation of samples for Jan 2011
/ ISO the determination of chemical composition
102 IS 14491:1997 Low carbon high strength cold rolled steel sheets and Mar 2012
| ISO 13887:2004 coils for cold forming
103 IS 14650:1999 Carbon steel cast billet ingots, billets, blooms and slabs Nov 2009 1
for re rolling purposes
104 IS 15103:2002 Fire resistant steel Feb 2013 1
105 IS 15391:2003 Cold rolled non-oriented electrical steel and strip Feb 2013 3
| IEC 60404-8-2&3:1998 delivered in semi processed state
106 IS 15647:2006 Hot rolled steel narrow width strip for welded tubes & Sep 2010
pipes
107 IS 15911:2010 Structural steel (ordinary quality) – Specification May 2011
108 IS 15914:2011 High tensile strength plat rolled steel plate (upto 6 mm), Sep 2011
| ISO 4978:1983 sheet and strip for the manufacture of welded gas
cylinder
109 IS 15961:2012 Hot-dip alumnium zinc alloy metallic coated steel sheet & Jun 2012
strip (plain)
110 IS 15962:2012 Structural steels for buildings and structures with Jun 2012
| ISO 24314:2006 improved seismic resistance
111 IS 15965:2012 Pre-painted aluminium zinc alloy metallic coated steel Jun 2012
strip & sheet (plain)
112 IS 16124:2004 Steel wire rod – dimensions and tolerances Apr 2009
/ ISO
113 IS 16160:2005 Continuously hot rolled steel sheet products – Aug 2012
/ ISO Dimensional and shape tolerances
114 IS 16162:2005 Continuously cold-rolled steel sheet products – Aug 2012
/ ISO Dimensional and shape tolerances
115 IS 16163:2005 Continuously hot dipped coated steel steel products Aug 2012
/ ISO dimensional & shape tolerances
1 DOC.MTD 4(5055) First Revision of IS 14246
2 DOC.MTD 4(5042) Second revision of IS 1956(Pt 4)
1 DOC.MTD 4(4852) Second revision of IS 1762 (Pt 1)1 DOC.MTD 4(5040) Second revision of IS 1956(Part 2)
2 DOC.MTD 4(5041) Second revision of IS 1956(Part 3)
1 DOC.MTD 4(5198) Draft Amendment No. 1 to IS 15914:2011
2 DOC.MTD 4(5206) Draft Amendment NO. 2 to IS 513:2008
3 DOC.MTD 4(5207) Galvanized steel sheet (plain and corrugated (seventh
revision of IS 277)
1 IS 1110:1990 Ferrosilicon (fourth revision) Mar 2009 1
2 IS 1170:1992 Ferrochromium (second revision) Mar 2009 1
3 IS 1171:2011 Ferromanganese (fifth revision)
4 IS 1466:1985 Ferrovanadium (third revision) Mar 2009
5 IS 1467:1993 Ferrotungsten ( third revision) Mar 2009
6 IS 1468:2000 Ferro titanium ( fourth revision) Mar 2009
7 IS 1469:1993 Ferromolybdenum ( fourth revision ) Mar 2009
8 IS 1470:2011 Silicomanganese (fourth revision) 1
9 IS 1471:1988 Ferrophosphorous (second revision) Mar 2009
10 IS 2021:1993 Metallic manganese(second revision) Mar 2009
11 IS 2022:1997 Calcium silicon (third revision) Mar 2009
12 IS 2023:1993 Metallic chromium (second revision) Mar 2009
13 IS 2024:1988 Ferrosilicochromium (third revision) Mar 2009
14 IS 2085:1962 Code for designation of ferro alloys Sep 2007
15 IS 2301:2000 Metallic silicon (second revision) Mar 2009
16 IS 2391:1970 Foundry nickel (first revision) Mar 2009
17 IS 2782:1964 Primary nickel Mar 2011
18 * IS 3011:1973 Ferrosilicozirconium (first revision) Mar 2011
19 IS 3012:1985 Chromemanganese ( first revision ) Mar 2011
20 IS 3013:1991 Ferroboron ( Third revision) Mar 2011
21 IS 3014:1993 Ferroniobium (Ferrocolumbium) (second revision) Mar 2009
22 IS 4182:1988 Misch metal (first revision) Mar 2009
23 IS 4409:1973 Ferronickel (first revision) Mar 2011 1
24 IS 5632:1970 Wolframite concentrate Mar 2011
25 IS 5633:1973 Vanadium pentoxide (first revision) Mar 2011
26 IS 5634:1987 Molybdenum oxide (technical)(first revision) Mar 2011
27 IS 7148:1980 Ferro alloys for welding industry Mar 2011 1
28 IS 7965:1976 Niobium (Columbium) Mar 2011
29 IS 11945:1987 Charge chrome Mar 2011
30 IS 12908:1990 Ferroaluminium Mar 2009
31 IS 13164:1991 Ferrosilicomagnesium Mar 2011
32 IS 15765:2008 Method of sampling ferro alloys for sieve analysis and
size determination
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com