Manufacture of ASTM A Standards, ASTM B Standards Pipes, Tubes, Hollow Tubes, Hollow Bars, Forgings
Manufacturer of ASTM-A Standard, ASTM-B Standard Pipe, Tube, Hollow-Tube, Hollow-Bar, Forging
ASTM A48, ASTM A-48 This specification covers gray iron castings intended for general
engineering use where tensile strength is a major consideration.
ASTM A53, ASTM A-53 Covers seamless and welded black and galvanized steel Pipe furnished in
the following types and grades: Type F – furnace Butt Welded (also known as continuous Weld) 1/8 in. to 4
in. NPS Type E – Electric-Resistance Welded, Grades A and B 1/8 in. to 24 in. NPS Type S – Seamless,
Grades A and B 1/8 in. to 26 in. NPS Except for Type F, pipe ordered to this specification is suitable For
forming, bending, and flanging. Grade B, the most common, has a minimum yield of 35,000 psi.
ASTM A72, ASTM A-72 Welded wrought iron pipe in Std. XS, and XXS weights suitable for
fabrication. More highly resistant to some types of corrosion than carbon
steel, astm 72 is suited for protective coating such as galvanizing.
Although highly resistant to vibration, wrought iron has a somewhat low
tensile strength due to low carbon content.
ASTM A105, ASTM A-105 This specification covers forged carbon steel piping components for
ambient and higher temperature service in pressure systems. Included are
flanges, fittings, valves and similar parts ordered either to dimensions
specified by the purchaser or to dimensional standards such as the ANSI
and API specifications referenced in the full ASTM Specification.
Forgings made to this specification are limited to a maximum weight of
10000 lb or 4540 kg. Larger forgings may be ordered to Specification A
- Tubesheets and hollow cylindrical forgings for pressure vessel
shells are not included within the scope of this specification. Although
this specification covers some piping components machined from rolled bar
and seamless tubular products, it does not cover raw material produced in these forms.
ASTM A106, ASTM A-106 Covers seamless only carbon steel pipe for high-temperature service.
Furnished in one of three grades, A, B, or C. Suitable for bending, flanging, and similar forming operations.
ASTM A26, ASTM A-126 This specification covers three classes of gray iron for castings intended
for use as valve pressure retaining parts, threaded and flanged pipe fittings and flanges.
ASTM A134, ASTM A-134 Covers electric-fusion-(arc)-welded straight seam or spiral Seam plate
pipe 16 in. and over in diameter, with wall thicknesses up to 0.75 in.
This pipe is intended for conveying liquid, gas or vapor.
ASTM A135, ASTM A-135 Covers two grades of electric-resistance-welded steel pipe A and B) 30 in.
diameter and under. Pipe is intended for conveying liquid, gas or vapor;
and only grade A is adapted for flanging and bending.
ASTM A139, ASTM A-139 Covers five grades (A and E) of electric-fusion-(arc)-welded, Straightseam, or spiral-seam
steel pipe, 4 in. and over in Diameter with nominal wall thicknesses up to 1.00 in. Has different mechanical properties than
standard plate grades. Used for conveying liquid, gas or vapor.
ASTM A161, ASTM A-161 Covers seamless, hot finished and cold drawn, low carbon and carbonmolybdenum steel
still tubes, for use in carrying fluids at elevated temperatures and pressures in various types of Heaters. This
specification includes tubes 2 to 9 in. O.D. Inclusive and over 0.220 in. in minimum wall thickness.
ASTM A178, ASTM A-178 Covers electric-resistance-welded tubes made of carbon steel and intended
for use as boiler tubes and superheater flues. Includes tubes 1/2 in. to 5
in. O.D. and 0.035 to 0.320 in. in Minimum wall thickness.
ASTM A179, ASTM A-179 Covers seamless cold drawn low carbon steel tubes for tubular head
transfer apparatus. Includes sizes 1/8 to 3 in. O.D. inclusive.
ASTM A182, ASTM A-182 This specification covers forged low alloy and stainless steel piping
components for use in pressure systems. Included are flanges, fittings,
valves and similar parts to specified dimensions or to dimensional
standards such as the ANSI specifications referenced in the full ASTM Specifications.
ASTM A192, ASTM A-192 This specification supersedes A-83 and covers seamless carbon steel boiler
and superheater tubes for high pressure service. Includes sizes 1/2 to 7
in. O.D. and 0.085 to 1.000 in. minimum wall thickness.
A-197 This specification covers malleable irons for castings manufactured by the cupola process.
ASTM A199, ASTM A-199 Covers several grades of chromium-molybdenum and chromium-molybdenum
silicon seamless cold drawn intermediate alloy steel tubes for head exchangers, condensers, and similar heat transfer
apparatus. Includes sizes 1/8 in. to 3 in. inclusive in O.D.
ASTM A200, ASTM A-200 Covers same grades as A-199 except use and size range varies. This
specification covers sizes 2 to 9 in. in O.D. and wall thickness over 0.220 min.
ASTM A203, ASTM A-203 This specification covers nickel-alloy steel plates intended primarily for
welded pressure vessels. It covers five grades, A, B, D, E and F.
ASTM A204, ASTM A-204 This specification covers molybdenum-alloy steel plates, intended
particularly for welded boilers and other pressure vessels covering three grades, A, B and C.
ASTM A209, ASTM A-209 Covers three grades of seamless carbon-molybdenum alloy steel Boiler and
superheater tubes. Includes sizes 1.2 to 5 in. in O.D. and 0.035 to 0.500 in minimum wall thickness.
ASTM A210, ASTM A-210 Covers seamless medium carbon steel boiler tubes and boiler flues
including safe ends, arch and stay tubes, and superheater tubes. Includes
sizes 1/2 to 5 in. in O.D. and 0.035 to 0.500 in. in minimum wall thickness.
ASTM A211, ASTM A-211 Covers spiral welded steel or iron pipe 4 to 48 in. in diameter, and
0.0625 to 0.6875 in. in wall thickness. Intended for conveying liquid, gas, or vapor.
ASTM A213, ASTM A-213 This specification covers minimum-wall-thickness, seamless ferritic and
austenitic steel, boiler and superheater tubes and austenitic steel heatexchanger tubes, designated
Grades T5, TP304, etc. These steels are referenced in the full ASTM Specification.
ASTM A216, ASTM A-216 This specification covers carbon steel castings for valves, flanges,
fittings or other pressure-containing parts for high-temperature service
and of quality suitable for assembly with other castings or wrought-steel
parts by fusion welding. The three grades included are WCA, WCB and WCC.
ASTM A217, ASTM A-217 This specification covers martensitic stainless steel and alloy steel
castings for valves, flanges, fittings and other pressure-containing parts
intended primarily for high-temperature and corrosive service. The grades
included in this specification are WC1, WC4, WC5, WC6, WC9, WC11, C5, C12 AND CA15.
ASTM A234, ASTM A-234 This specification covers wrought carbon steel and alloy steel fittings of
seamless and welded construction covered by the latest revision of ANSI B
16.9, ANSI B 16.11, ANSI B 16.28, MSS-SP79 and MSS-SP95. These fittings
are for use in pressure piping and in pressure vessel fabrication for
service at moderate and elevated temperatures. Fittings differing from
these ANSI and MSS standards shall be identified with the marking “S9”.
ASTM A240, ASTM A-240 This specification covers chromium, chromium-nickel and chromium manganese-nickel
stainless and heat-resisting steel plate, sheet and strip for pressure vessels.
ASTM A249, ASTM A-249 This specification covers nominal-wall-thickness welded tubes made from
the austenitic steels, referenced in the full ASTM Specification, with
various grades intended for such use as boiler, superheater, or condenser tubes.
ASTM A252, ASTM A-252 Covers welded and seamless steel pipe for piling application or Permanent
load carrying member. Available in Grades 1, 2 and 3 to meet physical properties as required.
ASTM A269, ASTM A-269 This specification covers grades of nominal-wall-thickness, stainless
steel tubing for general corrosion-resisting and low or high-temperature
service, as referenced in the full ASTM Specification.
ASTM A278, ASTM A-278 This specification covers gray iron for castings suitable for pressurecontaining parts
for use at temperatures up to650F.
ASTM A279, ASTM A-297 This specification covers iron-chromium and iron-chromium-nickel alloy
castings for heat-resistant service.
ASTM A311, ASTM A-311 Covers stress-relieved cold-drawn carbon steel bars produced to mechanical
property requirements. On class, B, is cold-drawn with higher than normal
(heavy) drafts to provide higher strength levels.
ASTM A312, ASTM A-312 This specification covers seamless and straight-seam welded austenitic
steel pipe intended for high-temperature and general corrosive service.
ASTM A333, ASTM A-333 Covers nominal wall seamless and welded carbon and alloy steel pipe
intended for low temperature service. (-50 to -320F). Several grades are
covered including Grades 1, 3, 4, 6, 7, 8, and 9.
ASTM A334, ASTM A-334 Covers six grades of seamless or welded carbon and alloy steel tubes
intended for use at low temperatures (-50 to -320F).
ASTM A335, ASTM A-335 Covers nominal wall seamless alloy steel pipe intended for high
temperature service. Pipe ordered to this specification shall be suitable
for bending, flanging, and similar forming operations, and for fusion
welding. Selection will depend upon design, service conditions,
mechanical properties, and high temperature characteristics. This
specification covers twelve grades, most common of which are Grades 1,5 7, 9, 11 and 22.
ASTM A338, ASTM A-338 This specification covers malleable iron flanges, pipe fittings and valve
parts, including parts to be assembled for use in railroad, marine and
other heavy duty service applications where fittings furnished in
accordance American National Standard for Malleable Iron Threaded
Fittings, Class 150 and 300 (ANSI B16.3) are not considered adequate.
ASTM A350, ASTM A-350 This specification covers several grades of carbon and low-alloy steel
forged or ring-rolled flanges, forged fittings and valve intended
primarily for low-temperature service and requiring notch toughness
testing. They are made to specified dimensions, or to dimensional
standards, such as the ANSI and API specifications referenced in the full
ASTM Specification. Although this specification covers come piping
components machined from rolled bar and seamless tubular materials. It
does not cover raw material produced in these product forms.
ASTM A351, ASTM A-351 This specification covers austenitic and austenitic-ferritic (duplex)
steel castings for valves, fittings and other pressure-containing parts.
Grades included in this specification are CF3, CF8, CF3M, CF8M, CF3MN and so on.
ASTM A352, ASTM A-352 This specification covers steel castings for valves, flanges, fittings and
other pressure-containing parts intended primarily for low-temperature
service. This specification contains the following grades LCA, LCB, LCC, LC1, LC2, LC2-1, LC3, LC4, LC9 and CA6NM.
ASTM A358, ASTM A-358 This specification covers electric-fusion-welded austenitic chromiumnickel alloy steel
pipe suitable for corrosive or high-temperature service, or both. (Although no restrictions are placed on the sizes of
pipe which may be furnished under this specification, commercial practice is commonly limited to sizes not less than NPS 8).
ASTM A387, ASTM A-387 This specification covers chromium-molybdenum alloy steel plates intended
primarily for welded boilers and pressure vessels designed for elevated temperature service. It covers the following
grades, 2, 5, 9, 11, 12, 21, 21L, 22, 22L and 91.
ASTM A403, ASTM A-403 This specification covers two general classes, WP and CR, of wrought
austenitic stainless steel fittings of seamless and welded construction
covered by the latest revision of ANSI B 16.9, ANSI B 16.11, ANSI B 16.28,
MSS-SP79 and MSS-SP95. Fittings differing from these ANSI and MSS
standards shall be identified with the marking “S9”.
ASTM A405, ASTM A-405 Covers on grade (P-24) of seamless ferritic alloy-steel pipe specially
heated treated for high temperature service.
A-420 This specification covers wrought carbon steel and alloy steel fittings of
seamless and welded construction covered by the latest revision of ANSI B
16.9, ANSI B 16.11, ANSI B 16.28, MSS-SP79 and MSS-SP95. Fittings
differing from these ANSI and MSS standards shall be identified with the
marking “S6”. These fittings are for use in pressure piping and pressure
vessel service at low temperatures.
ASTM A500, ASTM A-500 Covers cold formed welded and seamless carbon square, rectangular, or
special shape structural tubing for general structural purposes. Covers
three grades:
Grade A – 39,000 psi Min. Yield
Grade B – 46,000 psi Min. Yield
Grade C – 50,000 psi Min. Yield
ASTM A501, ASTM A-501 Covers hot formed welded and seamless carbon steel, rectangular, square,
or special shape tubing for general structural purposes.
ASTM A512, ASTM A-512 This specification covers cold-drawn buttweld carbon steel tubes for use
as mechanical tubing. It covers round, square, rectangular, and special shapes. Common grades in warehouse
stock are 1010, 1015, and 1020.
ASTM A513, ASTM A-513 This specification covers electric-resistance welded carbon and alloy
steel tubing for use as mechanical tubing. It covers round, square, rectangular, and special shapes
made from hot or cold rolled steel. It covers “as welded,” “sink drawn,” “mandrel drawn,” and “special smooth
inside diameter.”
ASTM A519, ASTM A-519 This specification covers a multitude of grades of carbon and alloy steel
seamless mechanical tubing. It covers both hot finished and cold drawn tubing up to and including 12-3/4 in.
outside diameter with wall thickness as required.
ASTM A524, ASTM A-524 Covers seamless carbon steel pipe for process piping applications.
Suitable for welding, bending, flanging, and similar forming operations.
Two grades are covered: Grade I (0.375 in. wall thickness and under) and
Grade II (greater than 0.375 in. wall thickness).
ASTM A618, ASTM A-618 Covers three grades of hot-formed welded and seamless high-strength lowalloy
square, rectangular, round or special shape tubing for use in bridge or building construction and general structural purposes.
ASTM A671, ASTM A-671 Covers electric-fusion-welded steel pipe with filler metal added,
fabricated from pressure vessel quality plate of several analyses and
strength levels and suitable for service at atmospheric and lower temperatures.
ASTM A672, ASTM A-672 Covers electric-fusion-welded steel pipe with filler metal added,
fabricated from pressure vessel quality plate of several analyses and
strength levels and suitable for high-pressure service at moderate temperatures.
ASTM A691, ASTM A-691 Covers electric-fusion-welded carbon and alloy steel pipe with filler
metal added, fabricated from pressure vessel quality plate of several
analyses and strength levels and suitable for high-pressure service at high temperatures.
ASTM B75, ASTM B-75 This specification covers seamless copper, round and rectangular,
including square tube suitable for general engineering purposes.
ASTM B75, ASTM B-75 This specification covers Copper UNS No. C12200 seamless copper water tube
suitable for general plumbing, and similar applications for the conveyance
of fluids, and commonly used with solder, flared, or compression type fittings.
ASTM B127, ASTM B-127 This specification covers rolled nickel-copper alloy (UNS04400) plate, sheet and strip.
ASTM B160, ASTM B-160 This specification covers nickel (UNS N02200) and low carbon nickel (UNS N02201) in the
form of hot-worked and cold-worked rod and bar.
ASTM B161, ASTM B-161 This specification covers nickel (UNS N02200) and low-carbon nickel (UNS
N02201) in the form of cold-worked seamless pipe and tube.
ASTM B162, ASTM B-162 This specification covers rolled nickel (UNS N02200)and low-carbon nickel
(UNS N02201) plate, sheet and strip.
ASTM B 163, ASTM B-163 This specification covers seamless tubes of nickel and nickel alloys for
use in condenser and heat-exchanger service. Please see the appropriate
ASTM specification for all the alloys covered by this specification.
ASTM B164, ASTM B-164 This specification covers nickel-copper alloys (UNS N04400 and N04405), in
the form of hot-worked and cold-worked rod and bar and cold-worked wire.
ASTM B165, ASTM B-165 This specification covers nickel-copper alloy (UNS N04400), in the form of
cold-worked seamless pipe and tube.
ASTM B166, ASTM B-166 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601,
N06690, N06025 and N06045) and nickel-chromium-cobalt-molybdenum alloy (UNS
N06617) in the form of hot-finished and cold-worked rounds, squares,
hexagons, rectangles and cold-worked wire.
ASTM B167, ASTM B-167 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601,
N06690, N06025 and N06045) in cold-worked annealed, hot-worked annealed
and hot-finished seamless pipe and tube intent for general corrosion
resistant and heat resistant applications.
ASTM B168, ASTM B-168 This specification covers rolled nickel-chromium-iron alloys (UNS N06600,
N06601, N06690, N06025 and N06045) and nickel-chromium-cobalt-molybdenum
alloy (UNS N06617) plate, sheet and strip.
ASTM B210, ASTM B-210 This specification covers aluminum and aluminum-alloy drawn seamless tubes
in straight lengths and coils for general purpose and pressure
applications in various alloys, tempers and thicknesses. Coiled tubes
are generally available only as round tubes with a wall thickness not
exceeding 0.083 in. and only in nonheat-treatable alloys. Please see the
appropriate ASTM specification for all the alloys covered by this specification.
ASTM B221, ASTM B-221 This specification covers aluminum and aluminum alloy extruded bar, rod,
wire, shape and tube in aluminum-alloys. Please see the appropriate ASTM
specification for all the alloys covered by this specification.
ASTM B234, ASTM B-234 This specification covers aluminum-alloy drawn seamless round tube in
straight lengths designated for use in surface condensers, evaporators and
heat exchangers. Please see the appropriate ASTM specification for all
the alloys covered by this specification.
ASTM B241, ASTM B-241 This specification covers aluminum and aluminum-alloy seamless pipe and
extruded round seamless tube in various alloys and tempers intended for
pressure applications. Please see the appropriate ASTM specification for
all the alloys covered by this specification.
ASTM B247, ASTM B-247 This specification covers aluminum-alloy die forgings, hand forgings and
rolled ring forgings. Please see the appropriate ASTM specification for
all the alloys covered by this specification.
ASTM B361, ASTM B-361 This specification covers only factory-made wrought aluminum and aluminumalloy welding fittings
in contrast to field-made fittings. Please see the appropriate ASTM specification for all the alloys
covered by this specification.
ASTM B366, ASTM B-366 This specification covers wrought welding fittings for pressure piping,
factory-made from nickel and nickel alloys. The term welding applies to
butt-weld or socket-welding parts such as 45 and 90 elbows, 180 bends,
caps, tees, reducers, lap-joint stub ends and other types, as covered by
ANSI B 16.9, ANSI B 16.11, ANSI B 16.28 and MSS-SP43.
ASTM B407, ASTM B-407 This specification covers UNS N08800, N08801, N08810 and N08811 in the
form of cold-worked and hot finished annealed seamless pipe and tube.
Alloy UNS N08800 is normally employed in service up to and including
1100F. Alloys UNS N08810 and N08811 are normally employed in service
temperatures above 1100F where resistance to creep and rupture is
required, and they are annealed to develop controlled grain size for
optimum properties in the temperature range.
ASTM B408, ASTM B-408 This specification covers UNS N08800, N08801, N08810 and N08811 in the
form of cold-worked and cold-worked rod and bar. Alloy UNS N08800 is
normally employed in service up to and including 1100F. Alloys UNS N08810
and N08811 are normally employed in service temperatures above 1100F where
resistance to creep and rupture is required, and they are annealed to
develop controlled grain size for optimum properties in the temperature range.
ASTM B409, ASTM B-409 This specification covers UNS N08800, UNS N08810 and UNS N08811 in the
form of rolled plate, sheet and strip. Alloy UNS N08800 is normally
employed in service temperatures up to and including 1100 F or 593 C.
Alloys UNS N08810 and UNS N08811 are normally employed in service
temperatures above 1100 F or 593 C, where resistance to creep and rupture
is required, and they are annealed to develop controlled grain size for
optimum properties in this temperature range.
ASTM B462, ASTM B-462 This specification covers forged or rolled UNS N08020, UNS N08024, UNS
N08026, and UNS N08367 pipe flanges, forged fittings and valves and parts
intended for corrosive high-temperature service.
ASTM B463, ASTM B-463 This specification covers UNS N08020, UNS N08026 and UNS N08024 alloy plate, sheet and strip.
ASTM B464, ASTM B-464 This specification covers welded UNS N08020, UNS N08024 and UNS N08026
alloy pipe for general corrosion-resisting and low or high-temperature service.
ASTM B468, ASTM B-468 This specification covers welded UNS N08020, UNS N08024 and UNS N08026
alloy boiler, heat exchanger and condenser tubes for general corrosionresisting and low or high-temperature service.
ASTM B474, ASTM B-474 This specification covers electric fusion welded UNS N08020, UNS N08026
and UNS N08024 alloy pipe suitable for high-temperature or corrosive
service. (Although no restrictions are placed on the sizes of pipe that
may be furnished under this specification, commercial practice is commonly limited to sizes not less than NPS 8).
ASTM B483, ASTM B-483 This specification covers aluminum and aluminum-alloy drawn tubes in
straight lengths and coils for general purpose applications in various
alloys. Please see the appropriate ASTM specification for all the alloys covered by this specification.
ASTM B574, ASTM B-574 This specification covers rod of low-carbon nickel-molybdenum-chromium
alloys, (UNS N10276, N06022 and N06455), low-carbon nickel-chromiummolybdenum alloy (UNS N06059),
and low-carbon nickel-chromium-molybdenum tungsten alloy (UNS N06686) for use in general corrosive service.
ASTM B575, ASTM B-575 This specification covers plate, sheet and strip of low-carbon nickelmolybdenum-chromium alloys,
(UNS N10276, N06022 and N06455), low-carbon nickel-chromium-molybdenum alloy (UNS N06059),and
low-carbon nickel chromium-molybdenum-tungsten alloy (UNS N06686) for use in general corrosive service.
ASTM B587, ASTM B-587 This specification covers round, rectangular, and square-welded copperalloy tube for
general engineering purposes.
ASTM B619, ASTM B-619 This specification covers welded pipe of nickel and nickel-cobalt alloys
(UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007,
N06975, N08320, N06002, N06022, N06059, N06230 and N06686).
ASTM B622, ASTM B-622 This specification covers seamless pipe and tube of nickel and nickelcobalt alloys
(UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007, N06975, N08320, N06002, N06022,
N06059, N06230 and N06686).
ASTM B626, ASTM B-626 This specification covers welded tube of nickel and nickel-cobalt alloys
(UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007,
N06975, N08320, N06002, N06022, N06059, N06230 and N06686).
ASTM B729, ASTM B-729 This specification covers UNS N08020, UNS N08026 and UNS N08024 seamless,
cold-worked pipe and tube intended for general corrosive service.
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com