ISA Hot Rolled Indian Standard Equal Unequal Angles – Leading Importer And Stockholder www.rolexmetals.com

ISA Hot Rolled Indian Standard Equal Unequal Angles

We are Stockholder & Distributors of IS-2062, ASTM A36, S235JR, S275JR, S355JR, ST37-2, ST52-3, ISA Indian Standard Angle (Equal / Un-Equal), ISA-2020, ISA 2525, ISA 3030, ISA 3535, ISA 4040, ISA 4545, ISA 5050, ISA 5555, ISA 6060, ISA 6565, ISA 7070, ISA 7575, ISA 8080, ISA 9090, ISA 100100, ISA 110110, ISA 130130, ISA 150150, ISA 200200, ISA 3020, ISA 4025, ISA 4530, ISA 5030, ISA 6040, ISA 6545, ISA 7045, ISA 7550, ISA 8050, ISA 9060, ISA 10065, ISA 10075, ISA 12575, ISA 12595, ISA 15075, ISA 150115, ISA 200100, ISA 200150 Sand Blasting Angles, Hot Dip Galvanized Angles, SAIL make ISA Angles, TATA make ISA Angles, Jindal make ISA Angles, VSP make ISA Angles, Epoxy Red Oxide Primer Coated Angles

Equal Angles

ISA – 20 x 20 mm

ISA – 25 x 25 mm

ISA – 30 x 30 mm

ISA – 35 x 35 mm

ISA – 40 x 40 mm

ISA – 45 x 45 mm

ISA – 50 x 50 mm

ISA – 55 x 55 mm

ISA – 60 x 60 mm

ISA – 65 x 65 mm

ISA – 70 x 70 mm

ISA – 75 x 75 mm

ISA – 80 x 80 mm

ISA – 90 x 90 mm

ISA – 100 x 100 mm

ISA – 110 x 110 mm

ISA – 120 x 120 mm

ISA – 130 x 130 mm

ISA – 150 x 150 mm

ISA – 200 x 200 mm

Un-Equal Angles

ISA – 30 x 20 mm

ISA – 40 x 25 mm

ISA – 45 x 30 mm

ISA – 50 x 30 mm

ISA – 60 x 40 mm

ISA – 65 x 45 mm

ISA – 70 x 45 mm

ISA – 75 x 50 mm

ISA – 80 x 50 mm

ISA – 90 x 60 mm

ISA – 100 x 65 mm

ISA – 100 x 75 mm

ISA – 125 x 75 mm

ISA – 125 x 95 mm

ISA – 150 x 75 mm

ISA – 150 x 115 mm

ISA – 200 x 100 mm

ISA – 200 x 150 mm

Size	Weight in Kgs. Per Feet	Weight in Kgs. per Mtr.
M.S. Angle
ISA 50 x 50 x 6	1.371	4.5
ISA 65 x 65 x 6	1.768	5.8
ISA 65 x 65 x 8	2.347	7.7
ISA 65 x 65 x10	2.865	9.4
ISA 75 x 75 x 6	2.073	6.8
ISA 75 x 75 x 8	2.713	8.9
ISA 75 x 75 x 10	3.353	11.0
ISA 90 x 90 x 6	2.500	8.2
ISA 90 x 90 x 8	3.292	10.8
ISA 90 x 90 x 10	4.085	13.4
ISA 100 x 100 x 8	3.689	12.1
ISA 100 x 100 x 10	4.542	14.9
ISA 100 x 100 x 12	5.396	17.7
ISA 110 x 110 x 10	5.060	16.6
ISA 110 x 110 x 12	6.006	19.7
ISA 130 x 130 x 10	6.006	19.7
ISA 130 x 130 x 12	7.134	23.4
ISA 150 x 150 x 16	10.914	35.8
ISA 150 x 150 x 20	13.445	44.1
ISA 200 x 200 x 16	14.786	48.5
ISA 200 x 200 x 20	18.292	60.0

ROLLED STEEL EQUAL ANGLES
DIMENSION AND PROPERTIES AS PER ISI SPECIFICATION IS: 2062-1999
Size	Thickness	Sectional Area	Weight / Metre	Centre of Gravity	Moments of Inertia
A x B	T	a	W	Cxx=Cyy	Ixx=Iyy
(mm x mm)	(mm)	(cm2)	(Kg)	(cm)	(cm4)
20×20	3	1.12	0.9	0.59	0.4
	4	1.45	1.1	0.63	0.5
25×25	3	1.41	1.1	0.71	0.8
	4	1.84	1.4	0.75	1
	5	2.25	1.8	0.79	1.2
30×30	3	1.73	1.4	0.83	1.4
	4	2.26	1.8	0.87	1.8
	5	2.77	2.2	0.92	2.1
35×35	3	2.03	1.6	0.95	2.3
	4	2.66	2.1	1	2.9
	5	3.27	2.6	1.04	3.5
	6	3.86	3	1.08	4.1
40×40	3	2.34	1.8	1.08	3.4
	4	3.07	2.4	1.12	4.5
	5	3.78	3	1.16	5.4
	6	4.47	3.5	1.2	6.3
45×45	3	2.64	2.1	1.2	5
	4	3.47	2.7	1.25	6.5
	5	4.28	3.4	1.29	7.9
	6	5.07	4	1.33	9.2
50×50	3	2.95	2.3	1.32	6.9
	4	3.88	3	1.37	9.1
	5	4.79	3.8	1.41	11
	6	5.68	4.5	1.45	12.9
55×55	5	5.27	4.1	1.53	14.7
	6	6.26	4.9	1.57	17.3
	8	8.18	6.4	1.65	22
	10	10.2	7.9	1.72	26.3
60×60	5	5.75	4.5	1.65	19.2
	6	6.84	5.4	1.69	22.6
	8	8.96	7	1.77	29
	10	11	8.6	1.85	34.8
65×65	5	6.25	4.9	1.77	24.7
	6	7.44	5.8	1.81	29.1
	8	9.76	7.7	1.89	37.4
	10	12	9.4	1.97	45
75×75	5	7.27	5.7	2.02	38.7
	6	8.66	6.8	2.06	45.7
	8	11.38	8.9	2.14	59
	10	14.02	11	2.22	71.4
80×80	6	9.29	7.3	2.18	56
	8	12.21	9.6	2.27	72.5
	10	15.05	11.8	2.34	87.7
	12	17.81	14	2.42	101.9
90×90	6	10.47	8.2	2.42	80.1
	8	13.79	10.8	2.51	104.2
	10	17.03	13.4	2.59	126.7
	12	20.19	15.8	2.66	147.9
100×100	6	11.67	9.2	2.67	111.3
	8	15.39	12.1	2.76	145.1
	10	10.03	14.9	2.84	177
	12	22.59	17.7	2.92	207
110×110	8	17.02	13.4	3	195
	10	21.06	16.5	3.08	238.4
	12	25.02	19.6	3.16	279.6
130×130	8	20.22	15.9	3.5	328.3
	10	25.06	19.7	3.58	402.7
	12	29.82	23.4	3.66	473.8
	16	36.81	28.9	3.78	574.6
150×150	10	29.03	22.8	4.06	622.4
	12	34.59	27.2	4.14	735.4
	16	42.78	35.8	4.26	896.8
	20	50.79	39.9	4.38	1084.9
200×200	12	46.61	36.6	5.36	1788.9
	16	57.8	48.5	5.49	2197.7
	20	68.81	60	5.61	2588.7

There are basically 2 types of Angle:

Equal Angle
Unequal Angle

Angels are available as per Indian and international specifications, conforming to extremely close dimensional tolerances and accurate mechanical properties

Technical Specifications:

Dimension and Properties

As Per ISI Specification IS: 2062-1999

Size	Thickness	Sectional Area	Weight /Metre	Centre of Gravity	Moments of Inertia
A x B	T	a	w	Cxx=Cyy	Ixx=Iyy
(mm x mm)	(mm)	(cm2)	(Kg)	(cm)	(cm4)
50×50	3.00	2.95	2.30	1.32	6.90
4.00	3.88	3.00	1.37	9.10
5.00	4.79	3.80	1.41	11.00
6.00	5.68	4.50	1.45	12.90
55×55	5.00	5.27	4.10	1.53	14.70
6.00	6.26	4.90	1.57	17.30
8.00	8.18	6.40	1.65	22.00
10.00	10.20	7.90	1.72	26.30
60×60	5.00	5.75	4.50	1.65	19.20
6.00	6.84	5.40	1.69	22.60
8.00	8.96	7.00	1.77	29.00
10.00	11.00	8.60	1.85	34.80
65×65	5.00	6.25	4.90	1.77	24.70
6.00	7.44	5.80	1.81	29.10
8.00	9.76	7.70	1.89	37.40
10.00	12.00	9.40	1.97	45.00
75×75	5.00	7.27	5.70	2.02	38.70
6.00	8.66	6.80	2.06	45.70
8.00	11.38	8.90	2.14	59.00
10.00	14.02	11.00	2.22	71.40
80×80	6.00	9.29	7.30	2.18	56.00
8.00	12.21	9.60	2.27	72.50
10.00	15.05	11.80	2.34	87.70
12.00	17.81	14.00	2.42	101.90
90×90	6.00	10.47	8.20	2.42	80.10
8.00	13.79	10.80	2.51	104.20
10.00	17.03	13.40	2.59	126.70
12.00	20.19	15.80	2.66	147.90
100×100	6.00	11.67	9.20	2.67	111.30
8.00	15.39	12.10	2.76	145.10
10.00	10.03	14.90	2.84	177.00
12.00	22.59	17.70	2.92	207.00
110×110	8.00	17.02	13.40	3.00	195.00
10.00	21.06	16.50	3.08	238.40
12.00	25.02	19.60	3.16	279.60
130×130	8.00	20.22	15.90	3.50	328.30
10.00	25.06	19.70	3.58	402.70
12.00	29.82	23.40	3.66	473.80
16.00	36.81	28.90	3.78	574.60
150×150	10.00	29.03	22.80	4.06	622.40
12.00	34.59	27.20	4.14	735.40
16.00	42.78	35.80	4.26	896.80
20.00	50.79	39.90	4.38	1084.90
200×200	12.00	46.61	36.60	5.36	1788.90
16.00	57.80	48.50	5.49	2197.70
20.00	68.81	60.00	5.61	2588.70

ANGLES EQUAL / UN-EQUAL ANGLE – IS-808:1989

IS-2062-A Angle, IS-2062 Grade-A Angle, IS:2062-A Angle, IS 2062 Grade-A Angle

IS-2062-B Angle, IS-2062 Grade-B Angle, IS:2062-B Angle, IS 2062 Grade-B Angle

IS-2062-C Angle, IS-2062 Grade-C Angle, IS:2062-C Angle, IS 2062 Grade-C Angle

IS-2062 E250-A Angle, IS-2062 Grade-E250 Grade-A Angle, IS:2062-E250 Grade A Angle

IS-2062 E250-B Angle, IS-2062 Grade-E250 Grade-B Angle, IS:2062-E250 Grade B Angle

IS-2062 E250-C Angle, IS-2062 Grade-E250 Grade-C Angle, IS:2062-E250 Grade C Angle

IS-2062 E250-BR Angle, IS-2062 Grade-E250 Grade-BR Angle, IS:2062-E250 Grade BR Angle

IS-2062 E250-BO Angle, IS-2062 Grade-E250 Grade-BO Angle, IS:2062-E250 Grade BO Angle

IS-2062 E300-A Angle, IS-2062 Grade-E300 Grade-A Angle, IS:2062-E300 Grade A Angle

IS-2062 E300-B Angle, IS-2062 Grade-E300 Grade-B Angle, IS:2062-E300 Grade B Angle

IS-2062 E300-C Angle, IS-2062 Grade-E300 Grade-C Angle, IS:2062-E300 Grade C Angle

IS-2062 E300-BR Angle, IS-2062 Grade-E300 Grade-BR Angle, IS:2062-E300 Grade BR Angle

IS-2062 E300-BO Angle, IS-2062 Grade-E300 Grade-BO Angle, IS:2062-E300 Grade BO Angle

IS-2062 E350-A Angle, IS-2062 Grade-E350 Grade-A Angle, IS:2062-E350 Grade A Angle

IS-2062 E350-B Angle, IS-2062 Grade-E350 Grade-B Angle, IS:2062-E350 Grade B Angle

IS-2062 E350-C Angle, IS-2062 Grade-E350 Grade-C Angle, IS:2062-E350 Grade C Angle

IS-2062 E350-BR Angle, IS-2062 Grade-E350 Grade-BR Angle, IS:2062-E350 Grade BR Angle

IS-2062 E350-BO Angle, IS-2062 Grade-E350 Grade-BO Angle, IS:2062-E350 Grade BO Angle

IS-2062 E410-A Angle, IS-2062 Grade-E410 Grade-A Angle, IS:2062-E410 Grade A Angle

IS-2062 E410-B Angle, IS-2062 Grade-E410 Grade-B Angle, IS:2062-E410 Grade B Angle

IS-2062 E410-C Angle, IS-2062 Grade-E410 Grade-C Angle, IS:2062-E410 Grade C Angle

IS-2062 E410-BR Angle, IS-2062 Grade-E410 Grade-BR Angle, IS:2062-E410 Grade BR Angle

IS-2062 E410-BO Angle, IS-2062 Grade-E410 Grade-BO Angle, IS:2062-E410 Grade BO Angle

IS-2062 E450-A Angle, IS-2062 Grade-E450 Grade-A Angle, IS:2062-E450 Grade A Angle

IS-2062 E450-B Angle, IS-2062 Grade-E450 Grade-B Angle, IS:2062-E450 Grade B Angle

IS-2062 E450-C Angle, IS-2062 Grade-E450 Grade-C Angle, IS:2062-E450 Grade C Angle

IS-2062 E450-BR Angle, IS-2062 Grade-E450 Grade-BR Angle, IS:2062-E450 Grade BR Angle

IS-2062 E450-BO Angle, IS-2062 Grade-E450 Grade-BO Angle, IS:2062-E450 Grade BO Angle

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI – 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email – marketing@rolexmetals.com
Website – www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com