Division Name: Metallurgical Engineering
Section Name: Mechanical Testing of Metals (MTD 3)
STANDARD ? YEAR ? TITLE ? IBR ?
IS 1403-1 (pdf)
IS 1403-1 (txt) 1993 Mechanical testing of metals – Reverse bend test, Part 1: Sheet, strip ISO 7799
IS 1499 (pdf)
IS 1499 (txt) 1977 Method for Charpy Impact Test (U-notch) for Metals
IS 1500 (pdf)
IS 1500 (txt) 2005 Method for Brinell Hardness Test for Metallic Materials ISO 6506-1
IS 1501 (pdf)
IS 1501 (txt) 2002 Method For Vickers Hardness Test for Metallic Materials
IS 1586-2 (pdf)
IS 1586-2 (txt) 2012 Metallic Materials – Rockwell Hardness Test, Part 2: Verification and Calibration of Testing Machines ( Scales A,B,C,D,E,F,G,H, K, N,T) ISO 6508-2:2005
IS 1586 (pdf)
IS 1586 (txt) 2000 Method for Rockwell Hardness Test for Metallic Material (Scales A-B-C-D-E-F-G-H-K 15N, 30N, 45N, 15T, 30T and 45T) ISO 6508 -1:1999
IS 1598 (pdf)
IS 1598 (txt) 1977 Method for Izod Impact Test of Metals
IS 1599 (pdf)
IS 1599 (txt) 2012 Metallic Materials – Bend Test ISO 7438
IS 1608 (pdf)
IS 1608 (txt) 2005 Mechanical testing of metals – Tensile Testing ISO 6892
IS 1716 (pdf)
IS 1716 (txt) 1985 Method for Reverse bend Test for Metallic Wire
IS 1717 (pdf)
IS 1717 (txt) 2012 Metallic Materials – Wire – Simple Torsion Test ISO 7800:2003
IS 1754 (pdf)
IS 1754 (txt) 2002 Method for Verification of Vickers Hardness Testing Machines
IS 1755 (pdf) 1983 Method for wrapping test for metallic wire ISO 7802
IS 1757 (pdf) 1988 Method for charpy impact test (V notch) for metallic material
IS 1828-1 (pdf)
IS 1828-1 (txt) 2005 Metallic Materials – Verification of Static Uniaxial Testing Machines, Part 1: Tension/compression testing Machines – Verification and calibration of the force-measuring systems ISO 7500-1
IS 1828-2 (pdf)
IS 1828-2 (txt) 2002 Metallic Materials – Verification of Static Uniaxial Testing Machines, Part 2: Tension Creep Testing Machines – Verification of the Applied Load ISO 7500-2
IS 2281 (pdf)
IS 2281 (txt) 2005 Method for Verification of Brinell Hardness Testing Machines ISO 6506-2
IS 2328 (pdf) 2005 Method for flattening test on metallic tubes
IS 2329 (pdf) 2005 Method for bend test on metallic tubes (in full section)
IS 2330 (pdf) 2011 Metallic Materials – Tube – Flanging Test
IS 2335 (pdf) 2005 Method of Drift Expanding Test on Metallic Tubes ISO 8493
IS 2854 (pdf)
IS 2854 (txt) 1990 Determination of young’s modulus,tangent modulus and chord modulus – Test method
IS 2855 (pdf)
IS 2855 (txt) 1991 Thermostat metals – Determination of flexivity
IS 3394 (pdf)
IS 3394 (txt) 1985 Method for Accelerated Life Test of Electrical Resistance Alloys for Heating Elements
IS 3407-1 (pdf)
IS 3407-1 (txt) 1983 Method for Creep Testing of Steel at Elevated Temperatures, Part 1: Tensile Creep Testing
IS 3407-2 (pdf)
IS 3407-2 (txt) 1983 Method for Creep Testing of Steel at Elevated Temperatures, Part 2: Tensile Creep Stress Rupture Testing
IS 3410 (pdf)
IS 3410 (txt) 1993 Metallic materials – Determination of linear thermal expansion
IS 3711 (pdf)
IS 3711 (txt) 2012 Steel And Steel Products- Location and Preparation of Samples And Test Pieces For Mechanical Testing
IS 3766 (pdf)
IS 3766 (txt) 1977 Method for calibration of pandulum impact testing machines for testing metals
IS 3803-1 (pdf)
IS 3803-1 (txt) 1989 Steel – Conversion of Elongation Values, Part I: Carbon, loow alloy steels ISO 2566-1
IS 3803-2 (pdf)
IS 3803-2 (txt) 1989 Steel – Conversion of Elongation Values, Part 2: Austenitic steels ISO 2566-2
IS 3848 (pdf)
IS 3848 (txt) 1981 Method for end quench test for hardenability of steel
IS 4132 (pdf)
IS 4132 (txt) 2005 Method for calibration of standardized blocks to be used for Brinell hardness teing machines
IS 4133-1 (pdf)
IS 4133-1 (txt) 1986 Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines, Part 1: HV 0.2 to HV 100
IS 4133 (pdf)
IS 4133 (txt) 2002 Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines
IS 4169 (pdf)
IS 4169 (txt) 1988 Method for calibration of force-proving instruments used for the verification of uniaxial testing machines
IS 4258 (pdf) 2011 Metallic Materials – Conversion of Hardness Values ISO18265:2003
IS 5069 (pdf)
IS 5069 (txt) 1982 Glossary of terms relating to methods of mechanical testing of metals
IS 5070 (pdf)
IS 5070 (txt) 1985 Method for beam unnotched impact test for grey cast iron
IS 5074 (pdf)
IS 5074 (txt) 1969 Method for axial load fatigue testing of steel
IS 5075 (pdf)
IS 5075 (txt) 1985 Method of rotating bar bending fatigue testing of metals
IS 5242 (pdf) 1979 Method of test for determining shear strength of metals
IS 5699 (pdf)
IS 5699 (txt) 1970 Method for chill testing of cast iron
IS 6243 (pdf) 1985 Method of hydrogen embrittlement test for copper
IS 6885-1 (pdf)
IS 6885-1 (txt) 2011 Metallic materials – Knoop hardness test, Part 1: Test method ISO 4545-1:2005
IS 6885-2 (pdf)
IS 6885-2 (txt) 2011 Metallic materials – knoop hardness test, Part 2: Verification and calibration of testing machines 4545-2:2005
IS 6885-4 (pdf)
IS 6885-4 (txt) 2011 Metallic Materials – Knoop Hardness Test, Part 4: Table of Hardness Values
IS 6885 (pdf)
IS 6885 (txt) 1975 Method for Knoop Hardness Testing of Metals
IS 6886 (pdf)
IS 6886 (txt) 1973 Method for dynamic force calibration of axial load fatigue testing machines by means of a strain gauge technique
IS 7095 (pdf) 1973 Method for Verification of Knoop Hardness Testing Machines
IS 7096 (pdf)
IS 7096 (txt) 1981 Method for scleroscope hardness testing for metallic materials
IS 7097 (pdf)
IS 7097 (txt) 1973 Method for Calibration of Standardized Blocks for Verification of Knoop Hardness Testing Machines
IS 7172 (pdf)
IS 7172 (txt) 1984 Method for verification of scleroscope hardness testing machines
IS 8632 (pdf)
IS 8632 (txt) 1977 Specification for Method for identification of test-piece axes ISO 3785:1976
IS 10166 (pdf) 1982 Method for calibration of standardized test block for verification of scleroscope hardness testing equipments
IS 10167 (pdf) 1982 Method for upsetting test on metallic materials
IS 10175-1 (pdf)
IS 10175-1 (txt) 1993 Mechanical testing of metals -Modified erichsen cupping test – sheet and strip Pt 1 Thickness upto 2 mm ISO 8490
IS 10180 (pdf)
IS 10180 (txt) 1982 Method for plain strain fracture toughness testing of metals
IS 10181 (pdf)
IS 10181 (txt) 1982 Method for determination of magnetic permeability of iron and steel
IS 10623 (pdf)
IS 10623 (txt) 1983 Drop Weight Tear Test on Ferritic Steels and Line Pipe
IS 10636-1 (pdf)
IS 10636-1 (txt) 1983 Methods for Measurement of Abrasive Wear Properties of Metallic Material, Part 1: Test Method for Gouging Abrasion Resistance (Jaw Crusher Test)
IS 10636-2 (pdf) 1983 Method for Measurement of Abrasive Wear Properties of Metallic Material, Part 2: Test Method for High Stress Abrasion
IS 10636-3 (pdf)
IS 10636-3 (txt) 1983 Methods for Measurement of Abrasive Wear Properties of Metallic Material, Part 3: Test Methods for Low Stress Abrasion
IS 11083 (pdf)
IS 11083 (txt) 1984 Method for Evaluation of Friction and Wear Properties of Materials Against Steel Surface
IS 11240 (pdf) 1985 Method for falling weight test on metallic materials
IS 11999 (pdf)
IS 11999 (txt) 2007 Method for determination of plastic strain ratio ‘r’ for steel metals ISO 10113
IS 12260 (pdf) 1987 Method for Ring Expanding Test on Metallic Tubes ISO 8495
IS 12261 (pdf) 1987 Method for reverse torsion test for metallic wire
IS 12278 (pdf) 2011 Metallic Materials – Tube – Ring Tensile Test ISO 8496:1998
IS 12514 (pdf)
IS 12514 (txt) 1988 Method for torsional stress fatigue testing
IS 12872 (pdf)
IS 12872 (txt) 2011 Metallic Materials – Calibration of Extensometers Used in Uniaxial Testing ISO 9513:1999
IS 13237 (pdf)
IS 13237 (txt) 1991 Metallic foils – Tension testing
IS 13838 (pdf)
IS 13838 (txt) 1993 Mechanical testing of metals – Determination of poisson’s rates
IS 15420 (pdf)
IS 15420 (txt) 2003 Metallic Materials – Charpy Pendulum Impact Test – Preparation and Characterization of Charpy V Reference Test Pieces for Verification of Test Machines
IS 15756 (pdf)
IS 15756 (txt) 2007 Metallic materials – Sheet and strip – Determination of tensile strain hardening exponent ISO 10275
IS 228-1 (pdf)
IS 228-1 (txt) 1987 Methods of chemical analysis of steels, Part 1: Determination of carbon by volumetric method (for carbon 0.05 to 2.50 percent)
IS 228-2 (pdf)
IS 228-2 (txt) 1987 Methods for Chemical Analysis of Steels, Part 2: Determination of Manganese in Plain-Carbon and Low Alloy Steels by Arsenite Method
IS 228-3 (pdf)
IS 228-3 (txt) 1987 Methods of chemical analysis of steels, Part 3: Determination of phosphorus by alkalimetric method
IS 228-4 (pdf)
IS 228-4 (txt) 1987 Methods of chemical analysis of steels, Part 4: Determination of total carbon by gravimetric method (for carbon greater than or equal to 0.1 percent)
IS 228-8 (pdf) 1989 Methods of chemical analysis of steels, Part 8: Determination of silicon by gravimetric method (for silicon 0.05 to 0.50 percent)
IS 228-9 (pdf) 1989 Methods of chemical analysis of steels, Part 9: Determination of sulphur in plain carbon steels by evolution method (for sulphur 0.01 to 0.25 percent)
IS 228-14 (pdf) 1988 Methods of chemical analysis of steels, Part 14: Determination of carbon by thermal conductivity method (for carbon 0.005 to 2.000 percent)
IS 228-17 (pdf)
IS 228-17 (txt) 1998 Methods of chemical analysis of steels, Part 17: Determination of nitrogen by thermal conductivity method (for nitrogen up to 0.4 percent)
IS 228-19 (pdf)
IS 228-19 (txt) 1998 Methods of chemical analysis of steels, Part 19: Determination of nitrogen by steam distillation
IS 228-20 (pdf)
IS 228-20 (txt) 2003 Methods for Chemical Analysis of Steels, Part 20: Determination of Carbon and Sulphur by Infra Red Absorption Method (for Carbon 0.005 to 2 Percent and Sulphur 0.001 to 0.35 Percent)
IS 228-21 (pdf)
IS 228-21 (txt) 2003 Methods for Chemical Analysis of Steels, Part 21: Determination of Copper by Spectrophotometric Method (for Copper 0.02 to 0.50 Percent)
IS 228-22 (pdf)
IS 228-22 (txt) 2003 Methods of Chemical Analysis of Steels, Part 22: Determination of Total Hydrogen in Steel by Thermal Conductivity Method (Hydrogen 0.1 ppm to 50 ppm)
IS 228-23 (pdf)
IS 228-23 (txt) 2003 Methods of Chemical Analysis of Steels, Part 23: Determination of Total Nitrogen in Steel by Optical Emission Spectrometer (Nitrogen 0.002 to 1.0 Percent)
IS 228-24 (pdf)
IS 228-24 (txt) 2003 Methods of Chemical Analysis of Steels, Part 24: Determination of Nitrogen in Steel by Inert Gas Fusion – Thermal Conductivity Method (Nitrogen 0.001 to 0.2 Percent)
IS 277 (pdf)
IS 277 (txt) 2003 Galvanized Steel Sheets (Plain and Corrugated)
IS 279 (pdf) 1981 Galvanized steel wire for telegraph and telephone purposes
IS 280 (pdf)
IS 280 (txt) 2006 Mild Steel Wire for General Engineering Purposes
IS 412 (pdf) 1975 Expanded Metal Steel Sheets for General Purposes
IS 513 (pdf)
IS 513 (txt) 2008 Cold reduced low carbon steel sheets and strips
IS 648 (pdf) 2006 Cold rolled non-oriented electrical steel sheet and strip – Fully processed type
IS 649 (pdf)
IS 649 (txt) 1997 Methods for testing steel sheets for magnetic circuits of power electrical apparatus
IS 1029 (pdf) 1970 Hot-rolled steel strip (baling)
IS 1079 (pdf)
IS 1079 (txt) 2009 Hot Rolled Carbon Steel Sheet and Strip
IS 1136 (pdf) 2008 Preferred sizes for wrought metal products
IS 1148 (pdf)
IS 1148 (txt) 2009 STEEL RIVET BARS (MEDIUM AND HIGH TENSILE) FOR STRUCTURAL PURPOSES FOR STRUCTURAL PURPOSES
IS 1149 (pdf) 1982 Specification for High Tensile Steel Rivet Bars for Structural Purposes
IS 1387 (pdf)
IS 1387 (txt) 1993 General requirments for the supply of metallurgical materials
IS 1673 (pdf)
IS 1673 (txt) 1984 Mild Steel Wire, Cold Heading Quality
IS 1762-1 (pdf)
IS 1762-1 (txt) 1974 Code for designation of steels, Part I Based on lettter symbols
IS 1812 (pdf)
IS 1812 (txt) 1982 Carbon Steel Wire for the Manufacture of Wood Screws
IS 1835 (pdf) 1976 Round Steel Wire for Ropes
IS 1956-2 (pdf)
IS 1956-2 (txt) 1976 Glossary of Terms Relating to Iron and Steel, Part II: Steel Making
IS 1956-3 (pdf) 1975 Glossary of Terms Relating to Iron and Steel, Part III: Hot-Rolled Steel Products (Excluding Sheet and Strip)
IS 1956-4 (pdf)
IS 1956-4 (txt) 1975 Glossary of Terms Relating to Iron and Steel, Part IV: Steel Sheet and Strip
IS 1956-5 (pdf)
IS 1956-5 (txt) 1976 Glossary of Terms Relating to Iron and Steel, Part 5: Bright steel bar and steel wire
IS 1990 (pdf)
IS 1990 (txt) 2009 Steel rivet and stay bars for boilers
IS 1993 (pdf)
IS 1993 (txt) 2006 Cold-reduced electrolytic tinplate ISO 11949 3
IS 2002 (pdf)
IS 2002 (txt) 2009 Steel plates for pressure vessels for intermediate and high temperature service including boilers
IS 2041 (pdf)
IS 2041 (txt) 2009 Steel Plates for Pressure Vessels Used at Moderate and Low Temperature
IS 2049 (pdf) 1978 Colour code for the identification of wrought steels for general engineering purposes
IS 2062 (pdf)
IS 2062 (txt) 2011 Hot Rolled Medium and High Tensile Structural Steel
IS 2100 (pdf)
IS 2100 (txt) 1970 Steel billets, bars and sections for boilers
IS 2255 (pdf) 1977 Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process)
IS 2385 (pdf) 1977 Hot-Rolled Mild Steel Sheet and Strip in Coil Form for Cold-Reduced Tinplate and Cold-Reduced Blackplate
IS 2507 (pdf) 1975 Cold-rolled steel strips for springs
IS 2549 (pdf) 1994 Code of classification of processed ferrous scrap
IS 2589 (pdf) 1975 Hard drawn steel wire for upholstery springs
IS 2591 (pdf) 1982 Dimensions for Hot Rolled Steel Bars for Threaded components
IS 2830 (pdf)
IS 2830 (txt) 2012 Carbon steel cast billet ingots,billets,blooms and slabs for re-rolling into steel for general structural purposes – Specification
IS 2831 (pdf)
IS 2831 (txt) 2012 Carbon Steel Cast Billet Ignots, Billets, Blooms and Slabs For Re-rolling into Structural Steel (Ordinary Quality)-
IS 2879 (pdf) 1998 Mild steel for metal arc welding electrodes
IS 3024 (pdf)
IS 3024 (txt) 2006 Grain orinted electrical steel sheets and strips
IS 3039 (pdf)
IS 3039 (txt) 1988 Structural steel for construction of hulls of ships
IS 3195 (pdf) 1992 Steel for the manufacture of volute and helical springs (for railway rolling stock)
IS 3298 (pdf)
IS 3298 (txt) 1981 Mild steel rivet bars for shipbuilding
IS 3431 (pdf)
IS 3431 (txt) 1982 Steel for the manufacture of volute, helical and laminated springs for automotive suspension
IS 3502 (pdf)
IS 3502 (txt) 2009 Steel Chequered Plates
IS 3885-1 (pdf) 1992 Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections
IS 3885-2 (pdf)
IS 3885-2 (txt) 1992 Steel for the Manufacture of Laminated Springs (Railway Rolling Stock), Part 2: Rib and Groove Sections
IS 3975 (pdf) 1999 Mild steel wires, formed wires and tapes for armouring of cables
IS 4072 (pdf)
IS 4072 (txt) 1975 Steel for Spring Washers
IS 4223 (pdf)
IS 4223 (txt) 1975 Steel Wire for Umbrella Ribs
IS 4224 (pdf) 1972 Steel Wire for Staples, Pins and Clips
IS 4454-1 (pdf)
IS 4454-1 (txt) 2001 Steel Wires for Mechanical Springs, Part I: Patented and Cold Drawn Steel Wires – Unalloyed
IS 4454-2 (pdf)
IS 4454-2 (txt) 2001 Steel Wires for Mechanical Springs, Part II: Oil Hardened and Tempered Spring Steel Wire and Valve Spring Wire – Unalloyed
IS 4454-4 (pdf) 2001 Steel Wires for Mechanical Springs, Part 4: Stainless Steel Wire
IS 4824 (pdf)
IS 4824 (txt) 2006 Bead wire for tyres
IS 5478 (pdf)
IS 5478 (txt) 1969 Thermostat metal sheet and strip
IS 5872 (pdf)
IS 5872 (txt) 1990 Cold Rolled Steel Strips (Box Strappings)
IS 5986 (pdf)
IS 5986 (txt) 2011 Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes
IS 6226-1 (pdf) 1994 Recommendations for apparatus for chemicals analysis of metals,Part 1 Apparatus for determination of carbon by direct combustion
IS 6226-2 (pdf) 1987 Recommendations for apparatus for chemicals analysis of metals, Part 2: Determination on of sulphur by direct combustion
IS 6240 (pdf) 2008 Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
IS 6902 (pdf) 1973 Steel wire for spokes
IS 6967 (pdf)
IS 6967 (txt) 1973 Steel for electrically welded round link chains
IS 7072 (pdf)
IS 7072 (txt) 1973 Glossary of terms relating to emission spectroscopy
IS 7226 (pdf)
IS 7226 (txt) 1974 Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes
IS 7283 (pdf)
IS 7283 (txt) 1992 Hot rolled bars for production of bright bars and machined parts for enginner ing applications
IS 7557 (pdf)
IS 7557 (txt) 1982 Specification for Steel wire : uartto 20 mm for the manufacture of cold forged rivets
IS 7598 (pdf)
IS 7598 (txt) 1990 Classification of steels ISO 4948(Pt 1, 2)
IS 7887 (pdf)
IS 7887 (txt) 1992 Mild steel wire rods for general engineering purposes
IS 7904 (pdf)
IS 7904 (txt) 1995 High carbon steel wire rods
IS 8052 (pdf) 2006 Steel ingots,billets and blooms for the production of springs, rivets and screws for general engineering applications
IS 8056 (pdf)
IS 8056 (txt) 1976 Specification for Steel Ingots and Billets for the Production of Hard-Drawn Steel Wire for Upholstery Springs
IS 8510-1 to 3 (pdf) 1977 Tinned steel wire for banding of armatures and rotors
IS 8563 (pdf)
IS 8563 (txt) 1977 Half round mild steel wire for the manufacture of split pins
IS 8564 (pdf)
IS 8564 (txt) 1977 Steel wire for nipples for spokes
IS 8565 (pdf)
IS 8565 (txt) 1977 Heald wire
IS 8566 (pdf)
IS 8566 (txt) 1977 Steel wire for reeds
IS 8910 (pdf)
IS 8910 (txt) 2010 General technical delivery requirements for steel and steel products ISO 404
IS 8917 (pdf)
IS 8917 (txt) 1978 Steel plates for galvenizing pots
IS 8951 (pdf)
IS 8951 (txt) 2001 Steel Cast Billet Ignots, Billets and Blooms for Production of High Carbon Steel Wire Rods
IS 8952 (pdf)
IS 8952 (txt) 1995 Steel ingots,blooms and billets for production of mild steel wire rods for generl engineering purposes
IS 9442 (pdf)
IS 9442 (txt) 1980 Hot rolled steel plates, sheets and strips for manufacture of agricultural tillage discs
IS 9476 (pdf)
IS 9476 (txt) 1980 Cold rolled steel strips for carbon steel razor blades
IS 9485 (pdf)
IS 9485 (txt) 1980 Cold-reduced and hot-rolled carbon steel sheet for porcelain enamelling
IS 9550 (pdf)
IS 9550 (txt) 2001 Bright Steel Bars
IS 9962 (pdf)
IS 9962 (txt) 1981 Steel Wire for Needles
IS 10340 (pdf)
IS 10340 (txt) 1982 Glossary of terms for cold-reduced tinplate and cold-reduced blackplate
IS 10748 (pdf)
IS 10748 (txt) 2004 Hot-rolled Steel Strip for Welded Tubes and Pipes
IS 10794 (pdf)
IS 10794 (txt) 1984 Mild steel wire for cottor pins
IS 11513 (pdf)
IS 11513 (txt) 2011 HOT-ROLLED CARBON STEEL STRIP FOR COLD ROLLING PURPOSES – SPECIFICATION
IS 11587 (pdf)
IS 11587 (txt) 1986 Structural weather resistant steels
IS 11951 (pdf)
IS 11951 (txt) 2009 Pumpset for Desert Coolers 11951
IS 12262 (pdf)
IS 12262 (txt) 1988 Trapezoidal steel wires for spring washers
IS 12313 (pdf) 1988 Hot-dip Terne Coated Carbon Steel Sheets
IS 12367 (pdf)
IS 12367 (txt) 1988 Cold-rolled Carbon Steel Strips/Coils for Manufacture of Welded Tubes
IS 12457 (pdf)
IS 12457 (txt) 1988 Code of practice for evaluation repairs and acceptance limits of surface defects in steel plates, and wide flats
IS 12591 (pdf)
IS 12591 (txt) 2006 Cold Reduced Electrolytic chromium/chromium oxide – Coated steel ISO 11950
IS 13566 (pdf) 1992 Recommended practice of pickling by H2SO4 levelling and oiling of LPG sheets
IS 13752 (pdf) 1993 Guidelines for Reporting Sequence of Elements in Steel and Pig Iron and Mechanical Properties in Steels
IS 14246 (pdf)
IS 14246 (txt) 1995 Continuously pre-painted galvanised steel sheets and coils
IS 14491 (pdf)
IS 14491 (txt) 1997 Low carbon high strength cold rolled steel sheets and coils for cold forming
IS 14650 (pdf) 1999 Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Re-Rolling Purposes
IS 15103 (pdf)
IS 15103 (txt) 2002 Fire Resistant Steel
IS 15391 (pdf) 2003 Cold Rolled Non-Oriented Electrical Steel Sheet and Strip – Semi-Processed Type
IS 15647 (pdf)
IS 15647 (txt) 2006 Hot rolled steel narrow width strip for selded tubes an pipes
IS 15911 (pdf)
IS 15911 (txt) 2010 Structural Steel (Ordinary Quality)
IS 15914 (pdf)
IS 15914 (txt) 2011 High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder
IS 15961 (pdf)
IS 15961 (txt) 2012 Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)
IS 15962 (pdf)
IS 15962 (txt) 2012 Structural Steels for Building and Structures with Improved Seismic Resistance
IS 15965 (pdf)
IS 15965 (txt) 2012 Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)
IS/ISO 7452 (pdf)
IS/ISO 7452 (txt) 2002 Hot-Rolled structural steel plates – tolerances on dimensions and shape ISO 7452:2002
IS/ISO 10474 (pdf)
IS/ISO 10474 (txt) 1991 STEEL AND STEEL PRODUCTS – INSPECTION DOCUMENTS ISO 10474:1991
IS/ISO 11951 (pdf)
IS/ISO 11951 (txt) 1995 Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel ISO 11951:1995
IS/ISO 14284 (pdf)
IS/ISO 14284 (txt) 1996 Steel and Iron – Sampling and Preparation of Samples for the Determination of Chemical Composition ISO 14284:1996
IS/ISO 16124 (pdf)
IS/ISO 16124 (txt) 2004 Steel Wire Rod – Dimensions and Tolerances ISO 16124:2004
IS/ISO 16160 (pdf)
IS/ISO 16160 (txt) 2005 Continuously Hot-Rolled Steel Sheet Products – Dimensional and Shape Tolerances ISO 16160:2005
IS/ISO 16162 (pdf)
IS/ISO 16162 (txt) 2005 Continuously cold-rolled steel sheet products – Dimensional and shape tolerances ISO 16162:2005
IS/ISO 16163 (pdf)
IS/ISO 16163 (txt) 2005 Continuously Hot-Dipped Coated Steel Sheet Products – Dimensional and Shape Tolerances ISO 16163:2005
SP 71 (pdf)
SP 71 (txt) 2012 Compendium of Method of Chemical Analysis of Steels
IS 1110 (pdf) 1990 Ferrosilicon
IS 1110 (pdf) 1990 Ferrosilicon (Bi-lingual)
IS 1170 (pdf) 1992 Ferrochromium
IS 1171 (pdf)
IS 1171 (txt) 2011 Ferromanganese
IS 1466 (pdf) 1985 Ferrovanadium
IS 1467 (pdf)
IS 1467 (txt) 1993 Ferrotungsten
IS 1468 (pdf)
IS 1468 (txt) 2000 Ferrotitanium
IS 1469 (pdf) 1993 Ferromolybdenum
IS 1470 (pdf) 1990 Silicomanganese
IS 1470 (pdf)
IS 1470 (txt) 2013 Silicomanganese
IS 1471 (pdf) 1988 Ferrophosphorous
IS 1559-1 (pdf) 1988 Methods of chemical analysis of ferro silicon, Part 1: Determination of silicon
IS 1559-2 (pdf)
IS 1559-2 (txt) 1982 Methods of chemical analysis of ferro silicon, Part 2: Determination of carbon
IS 1559-3 (pdf) 1982 Methods of Chemical Analysis of Ferrosilicon, Part III: Determination of Sulphur
IS 1559-4 (pdf)
IS 1559-4 (txt) 1982 Methods of chemical analysis of ferro silicon, Part 4: Determination of phosphorus
IS 1559-5 (pdf)
IS 1559-5 (txt) 2003 Chemical Analysis of Ferrosilicon, Part 5: Determination of Aluminium in Ferrosilicon (Aluminium 0.05 to 1.75 Percent)
IS 1559-6 (pdf)
IS 1559-6 (txt) 1982 Methods of chemical analysis of ferro silicon, Part 6: Determination of calcium
IS 1559-7 (pdf)
IS 1559-7 (txt) 1982 Methods of Chemical Analysis of Ferrosilicon, Part VII: Determination of Manganese
IS 1559 (pdf)
IS 1559 (txt) 1961 Methods of Chemical Analysis of Ferro-Alloys
IS 2017 (pdf)
IS 2017 (txt) 1967 Methods of Chemical analysis of metallic manganese
IS 2018 (pdf)
IS 2018 (txt) 1998 Methods of chemical analysis of calcium silicon
IS 2020-1 (pdf)
IS 2020-1 (txt) 1968 Methods of chemical analysis of silicon chromium, Part 1: Analysis of silicon and chromium
IS 2021 (pdf)
IS 2021 (txt) 1993 Metallic manganese
IS 2022 (pdf)
IS 2022 (txt) 1997 Calcium silicon
IS 2023 (pdf)
IS 2023 (txt) 1993 Metallic chromium
IS 2024 (pdf) 1988 Ferrosilicochromium
IS 2085 (pdf) 1962 Code for designation of ferro alloys
IS 2277 (pdf)
IS 2277 (txt) 1964 Methods of chemical analysis of metallic silicon
IS 2301 (pdf) 2000 Metallic Silicon
IS 2391 (pdf) 1970 Foundry nickel
IS 2782 (pdf) 1964 Primary nickel
IS 3011 (pdf) 1973 Ferrosilicozirconium
IS 3012 (pdf) 1985 Chromemanganese
IS 3013 (pdf)
IS 3013 (txt) 1991 Ferroboron
IS 3014 (pdf)
IS 3014 (txt) 1993 Ferroniobium (Ferrocolumbium)
IS 3295-1 (pdf)
IS 3295-1 (txt) 1969 Method of chemical analysis of ferroboron, Part 1: Analysis of carbon, silicon and aluminium
IS 3295-2 (pdf) 1970 Method of chemical analysis of ferroboron, Part 2: Determination of boron
IS 4182 (pdf) 1988 Misch metal
IS 4409 (pdf) 1973 Ferronickel
IS 5632 (pdf) 1970 Wolframite Concentrate
IS 5633 (pdf) 1973 Vanadium pentoxide
IS 5634 (pdf) 1987 Molybdenum oxide (technical)
IS 7148 (pdf) 1980 Ferro alloys for welding industry
IS 7965 (pdf) 1976 Niobium (Columbium)
IS 11945 (pdf) 1987 Charge chrome
IS 12614-1 (pdf)
IS 12614-1 (txt) 1988 Methods of Chemical Analysis of Ferromolybdenum, Part 1: Determination of Molybdenum
IS 12614-2 (pdf) 1988 Methods of Chemical Analysis of Ferro-molybdenum, Part 2: Determination of Total Carbon
IS 12614-3 (pdf) 1988 Methods of Chemical Analysis of Ferro-molybdenum, Part 3: Determination of Silicon
IS 12614-4 (pdf)
IS 12614-4 (txt) 1988 Methods of Chemical Analysis of Ferro-molybdenum, Part 4: Determination of Sulphur
IS 12614-5 (pdf) 1988 Methods of Chemical Analysis of Ferro-molybdenum, Part 5: Determination of Phosphorus
IS 12614-6 (pdf)
IS 12614-6 (txt) 1988 Methods of Chemical Analysis of Ferro-molybdenum, Part 6: Determination of Copper
IS 12614-7 (pdf)
IS 12614-7 (txt) 1988 Methods of Chemical Analysis of Ferro-molybdenum, Part 7: Determination of Aluminium
IS 12908 (pdf) 1990 Ferroaluminium
IS 12908 (pdf) 1990 Ferroaluminium (Bi-lingual)
IS 13164 (pdf) 1991 Ferrosilicomagnesium
IS 13452-1 (pdf)
IS 13452-1 (txt) 1992 Chemical Analysis of Ferrochromium, Part 1: Determination of silicon in high carbon ferrochromium by gravimetiric method
IS 13452-2 (pdf) 1992 Chemical Analysis of Ferrochromium, Part 2: Determination of silicon in low carbon ferrochromium by gravimetric method
IS 13452-3 (pdf)
IS 13452-3 (txt) 1992 Chemical Analysis of Ferrochromium, Part 3: Determination of phosphorus in low carbon ferrochromium by spectrometric method
IS 13452-4 (pdf)
IS 13452-4 (txt) 1992 Chemical Analysis of Ferrochromium, Part 4: Determination of total sulphur in low carbon and high carbon ferrochromium by direct combustion method
IS 13452-5 (pdf)
IS 13452-5 (txt) 2003 Chemical Analysis of Ferrochromium, Part 5: Determination of Chromium in High Carbon Ferrochromium/Chargechrome by Dichromate Titration
IS 13452-6 (pdf)
IS 13452-6 (txt) 1997 Chemical Analysis of Ferrochromium, Part 6: Determination of chromium in low carbon ferro chromium
IS 13452-7 (pdf)
IS 13452-7 (txt) 2003 Chemical Analysis of Ferrochromium, Part 7: Determination of Phosphorus in Ferrochromium/Chargechrome by Alkalimetric Method
IS 13840-1 (pdf)
IS 13840-1 (txt) 1993 Chemical analysis of ferro titanium, Part 1: Determination of carbon by direct combustion gravimetric method
IS 13840-2 (pdf) 1993 Chemical analysis of ferro titanium, Part 2: Determination of silicon by gravimetric method
IS 13840-3 (pdf)
IS 13840-3 (txt) 1993 Chemical analysis of ferro titanium, Part 3: Determination of titanium by cupferron (gravimetric) method
IS 13840-4 (pdf)
IS 13840-4 (txt) 1998 Chemical analysis of ferro titanium, Part 4: Determination of aluminium by phosphate method
IS 13840-5 (pdf) 1998 Chemical analysis of ferrotitanium, Part 5: Determination of sulpher by direct combustion method
IS 13840-6 (pdf)
IS 13840-6 (txt) 1998 Chemical analysis of ferro titanium, Part 6: Determination of titanium by x-ray fluorescence technique
IS 13938-1 (pdf) 1994 Chemical analysis of ferromanganese, Part 1: Determination of silicon by gravimetric method
IS 13938-3 (pdf)
IS 13938-3 (txt) 1993 Chemical analysis of ferromanganese, Part 3: Determination of phosphorous by volumetric (alkalimetric) method
IS 13938-4 (pdf) 1994 Chemical Analysis of Ferromangnese, Part-4 Determination of Total Sulpher by direct Combustion Method
IS 14529 (pdf)
IS 14529 (txt) 2004 Chemical Analysis of Ferrosilicon-Magnesium Alloy
IS 15396 (pdf)
IS 15396 (txt) 2003 Chemical Analysis of Ferro-Silicon-Zirconium Alloys
IS 15765 (pdf)
IS 15765 (txt) 2008 Method of sampling ferro alloys for sieve analysis and size determination
IS 210 (pdf)
IS 210 (txt) 2009 Grey Iron Castings
IS 1536 (pdf) 2001 Centrifugally cast (spun) iron pressure pipes for water, gas and sewage
IS 1537 (pdf) 1976 Vertically cast iron pressure pipes for water, gas and sewage
IS 1538 (pdf) 1993 Cast iron fittings for pressure pipes for water, gas and sewage
IS 1729 (pdf) 2002 Cast Iron/Ductile Iron Drainage Pipes and Pipe Fittings for Over Ground Non-Pressure Pipeline Socket and Spigot Series
IS 1865 (pdf)
IS 1865 (txt) 1991 Iron castings with spheroidal or nodular graphite
IS 1879 (pdf)
IS 1879 (txt) 2010 Malleable cast iron pipe fittings _ Specification
IS 1956-7 (pdf) 1976 Glossary of Terms Relating to Iron and Steel, Part VII: Wrought Iron
IS 2084 (pdf) 1991 Code for designation of pig iron
IS 2749 (pdf)
IS 2749 (txt) 1974 Austenitic iron castings
IS 3005-1 (pdf)
IS 3005-1 (txt) 1979 Grey Cast Iron Ingot Moulds, Stools and Slag Ladles, Part I: Bottom Stools for Large Size Ingot Moulds Weighing 8 Tonnes and Higher
IS 3005-2 (pdf)
IS 3005-2 (txt) 1979 Grey Cast Iron Ingot Moulds, Stools and Slag Ladles, Part II: Grey Cast Iron Ingot Moulds of Mass More than Eight Tonnes
IS 3005-3 (pdf)
IS 3005-3 (txt) 1982 Grey Cast Iron Ingot Moulds, Stools and Slag Laddles, Part III: Grey Cast Iron Ingot Moulds of Mass More than One Tonne and up to Eight Tonnes
IS 3005-4 (pdf)
IS 3005-4 (txt) 1984 Grey Cast Iron Ingot Moulds, Stools and Slag Laddles, Part 4: Grey Cast Iron Ingot Moulds of Mass up to 1 Tonne
IS 3355 (pdf)
IS 3355 (txt) 1974 Grey iron castings for elevated temperatures for non-pressure containing parts
IS 3516 (pdf) 1966 Cast iron pipe flanges and flanged fittings for petroleum industry
IS 3896-1 (pdf)
IS 3896-1 (txt) 1978 Comparison of Indian and Overseas Standards for Iron Castings, Part I: Grey Iron Castings
IS 3896-2 (pdf)
IS 3896-2 (txt) 1985 Comparison of Indian and Overseas Standards for Iron Castings, Part 2: Spheroidal or Nodular Graphite Iron Castings
IS 3989 (pdf)
IS 3989 (txt) 1984 Centrifugally cast (spun) iron spigot and socket soil,waste, ventilation and rainwater pipes, fittings, and accessories
IS 4771 (pdf)
IS 4771 (txt) 1985 Abrasion-resistant iron castings
IS 5519 (pdf)
IS 5519 (txt) 1979 Deviations for untoleranced dimensions and mass of grey iron castings
IS 5531 (pdf)
IS 5531 (txt) 1988 Cast iron specials for asbestos-cement pressure pipes for water, gas and sewage
IS 5787 (pdf) 1986 Spheroidal or nodular graphite iron castings for paper mill dryer rolls
IS 5788 (pdf)
IS 5788 (txt) 1986 Iron castings with spheroidal or nodular graphite for pressure containing parts for use at elevated temperatures
IS 5789 (pdf)
IS 5789 (txt) 1993 Austenitic Spheroidal Graphite Iron Castings for Pressure Containing Parts Suitable for Low-Temperature Service
IS 6163 (pdf) 1978 Specification for Centrifugally Cast (Spun) Iron Low Pressure Pipes for Water, Gas and Sewaage
IS 6418 (pdf) 1971 Cast iron and malleable cast iron flanges for general engineering purposes
IS 6629 (pdf)
IS 6629 (txt) 1972 Cast iron rolls
IS 7181 (pdf) 1986 Horizontally cast iron double flanged pipes for water, gas and sewage
IS 7520 (pdf)
IS 7520 (txt) 1974 Corrosion resistant high silicon iron castings
IS 7925 (pdf)
IS 7925 (txt) 1976 Low alloy types of abrasion resistant iron castings
IS 8329 (pdf)
IS 8329 (txt) 2000 Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewage
IS 8349 (pdf) 1977 Deviations for untoleranced dimensions of malleable iron castings
IS 8350 (pdf)
IS 8350 (txt) 1977 Deviations for untoleranced dimensions of spheroidal or nodular graphite iron castings
IS 8794 (pdf) 1988 Cast iron detachable joints for use with asbestos cement pressure pipes
IS 9321 (pdf)
IS 9321 (txt) 1979 Material for alloy cast iron valve seat inserts
IS 9523 (pdf)
IS 9523 (txt) 2000 Ductile Iron Fittings for Pressure Pipes for Water, Gas and Sewage
IS 9630 (pdf)
IS 9630 (txt) 1980 Recommended practices for production of spheroidal graphite iron
IS 10292 (pdf) 1988 Dimensional requirements for rubber sealing rings for C.I.D. joints in asbestos cement piping
IS 10299 (pdf)
IS 10299 (txt) 1982 Cast iron saddle pieces for service connection from asbestos cement pressure pipes
IS 12308-1 (pdf) 1987 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 1: Determination of total carbon by thermal conductivity method (for carbon 1.00 to 4.50 percent)
IS 12308-2 (pdf) 1987 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 2: Determination of sulphur by iodimetric titration after combustion (for sulphur 0.005 to 0.25 percent)
IS 12308-3 (pdf) 1987 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 3: Determination of manganese by periodic spectrophotometric method (for manganese 0.1 to 2.5 percent)
IS 12308-4 (pdf) 1988 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 4: Determination of Total Carbon, Graphitic Carbon and Combined Carbon by Gravimetric Method
IS 12308-5 (pdf)
IS 12308-5 (txt) 1991 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 5: Determination of phosphorus by alkalimetric method (for phosphorus 0.01 to 0.50 percent)
IS 12308-6 (pdf) 1991 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 6: Determination of silicon by gravimetric method (for silicon 0.1 to 6.0 percent)
IS 12308-8 (pdf)
IS 12308-8 (txt) 1997 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 8: Determination of chromium by per sulphate oxidation method (for chromium 0.1 to 28 percent)
IS 12308-9 (pdf)
IS 12308-9 (txt) 1993 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 9: Determination of Molybdenum By Thiocyanate (Spectrometric) Method (for Molybdenum 0.01 to 1.
IS 12308-10 (pdf) 1991 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 10: determination of managanese (upto 7.0 percent) by arsenite(volumetric )method
IS 12308-11 (pdf)
IS 12308-11 (txt) 1991 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 11: Determination of total carbon by the direct combustion volumetric method (for carbon 1.50 to 4.50 percent)
IS 12308-12 (pdf)
IS 12308-12 (txt) 1992 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 12: Determination of copper by atomic absorption spectrometric method (for copper 0.01 to 0.5 percent)
IS 12308-13 (pdf)
IS 12308-13 (txt) 1992 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 13: Determination of magnesium by atomic absorptin spectrometric method (for magnesium upto 0.1 percent)
IS 12308-14 (pdf)
IS 12308-14 (txt) 1993 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 14: Determination of titanium by hydrogen per oxide (spectrophotometric) method (for titanium upto 0.25 percent)
IS 12820 (pdf) 2004 Dimensional Requirements of Rubber Gaskets for Mechanical Joints and Push-on Joints for Use with Cast Iron Pipes and Fittings for Carrying Water, Gas and Sewage
IS 12987 (pdf)
IS 12987 (txt) 1991 Cast iron detachable joints for use with asbestos cement pressure pipes (light duty)
IS 12988 (pdf) 1991 Rubber Sealing Rings for Cid Joints for Light Duty ac Pipes – Dimensional Requirements
IS 13382 (pdf)
IS 13382 (txt) 2004 Cast Iron Specials for Mechanical and Push-on Flexible Joints for Pressure Pipe Lines for Water, Gas and Sewage ISO 2531
IS 13502 (pdf)
IS 13502 (txt) 1992 Pig iron
IS 14329 (pdf)
IS 14329 (txt) 1995 Malleable iron castings
IS 15338 (pdf)
IS 15338 (txt) 2003 Spectrometric Analysis of Cast Iron by Direct Reading Optical Emission Vacuum Spectrometer – Point to Plane Technique
IS 15905 (pdf)
IS 15905 (txt) 2011 Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories – Spigot Series
IS 21 (pdf) 1992 Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils
IS 23 (pdf)
IS 23 (txt) 1980 Primary Aluminium Ingots for Remelting for Aircraft Purposes
IS 202 (pdf) 1981 Aluminium Casting Alloy Ingots and Castings for Aircraft Purposes
IS 504 (pdf)
IS 504 (txt) 1963 Methods of Chemical Analysis of Aluminium and its Alloys
IS 617 (pdf)
IS 617 (txt) 1994 Aluminium and aluminium alloy ingots and castings for general engineering purposes
IS 733 (pdf)
IS 733 (txt) 1983 Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (for General Engineering Purposes)
IS 734 (pdf)
IS 734 (txt) 1975 Wrought aluminium and aluminium alloys,forging stock and forgings for general engineering purposes
IS 736 (pdf)
IS 736 (txt) 1986 Wrought aluminium and aluminium alloy plate for general engineering purposes
IS 737 (pdf)
IS 737 (txt) 2008 Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes
IS 738 (pdf)
IS 738 (txt) 1994 Wrought aluminium alloys, drawn tube for general engineering purposes
IS 739 (pdf)
IS 739 (txt) 1992 Wrought aluminium and aluminium alloy wire for general engineering purposes
IS 740 (pdf)
IS 740 (txt) 1977 Wrought aluminium and aluminium alloy rivet stock for general engineering purposes
IS 1068 (pdf)
IS 1068 (txt) 1993 Eletroplated coatings of nickle plus chromium and copper plus nickel plus chromium
IS 1253 (pdf) 1992 Aluminium for use in iron and steel manufacture
IS 1254 (pdf) 2007 Corrugated aluminium sheet
IS 1284 (pdf)
IS 1284 (txt) 1975 Wrought aluminium alloy bolt and screw stock for general engineering purposes
IS 1285 (pdf)
IS 1285 (txt) 2002 Wrought Aluminium and Aluminium Alloys – Extruded Round Tube and Hollow Sections for General Engineering Purposes
IS 1327 (pdf)
IS 1327 (txt) 1988 Methods of determination of mass of tin coatings of tinplate
IS 1337 (pdf) 1993 Electroplated coatings of hard chromium for engineering purposes
IS 1359 (pdf)
IS 1359 (txt) 1992 Electroplated coatings of tin
IS 1378 (pdf) 1987 Oxidized-copper finishes
IS 1572 (pdf)
IS 1572 (txt) 1986 Electroplated Coatings of Cadmium on Iron and Steel
IS 1573 (pdf)
IS 1573 (txt) 1986 Electroplated Coatings of Zinc on Iron and Steel
IS 1772 (pdf)
IS 1772 (txt) 1973 Eletroplated coatings of copper
IS 1773 (pdf)
IS 1773 (txt) 1982 Electroplated coatings of brass
IS 1820 (pdf) 1979 Recommended shapes and sizes for aluminium notched bars and ingots for remelting purposes
IS 1958 (pdf)
IS 1958 (txt) 1989 Nickel anodes for electroplating
IS 1959 (pdf) 1994 Silver Anodes for Electroplating
IS 1986 (pdf)
IS 1986 (txt) 1981 Code of practice for hard chromium plating on iron and steel for general engineering purposes
IS 2047 (pdf) 1992 Aluminium alloy hardeners (Master alloys)
IS 2066 (pdf)
IS 2066 (txt) 1962 Coding and classification for non-ferrous scrap metals and residues
IS 2067 (pdf) 1975 Wrought aluminium wire for electrical purposes
IS 2304 (pdf)
IS 2304 (txt) 1962 Procedure for inspection and testing of light metals (aluminium and magnesium) and their alloy ingots and castings for aircraft purposes
IS 2384 (pdf) 1963 Tin anodes for electroplating
IS 2479 (pdf)
IS 2479 (txt) 1981 Colour code for the identification of aluminium and aluminium alloys for general engineering purposes
IS 2525 (pdf) 1982 Dimensions for wrought aluminium and aluminium alloys, wire
IS 2590 (pdf) 1987 Primary aluminium ingots for remelting for general engineering purposes
IS 2629 (pdf)
IS 2629 (txt) 1985 Recommended Practice for Hot-Dip Galvanizing of Iron and Steel
IS 2633 (pdf)
IS 2633 (txt) 1986 Methods for testing uniformity of coating of zinc coated articles
IS 2673 (pdf)
IS 2673 (txt) 2002 Dimensions for Wrought Aluminium and Aluminium Alloys Extruded Round Tube – Specificatioin
IS 2676 (pdf)
IS 2676 (txt) 1981 Dimension for wrought aluminium and aluminium alloy sheet and strip
IS 2677 (pdf)
IS 2677 (txt) 1979 Dimensions for wrought aluminium and aluminium alloys, plates and hot rolled sheets
IS 2678 (pdf)
IS 2678 (txt) 1987 Dimensions and tolerances for wrought aluminium and aluminium alloy drawn round tube
IS 2679 (pdf)
IS 2679 (txt) 1964 Recommendations for equipment for electroplating
IS 3194 (pdf)
IS 3194 (txt) 1980 Recommended practice for cleaning of metals prior to electroplating
IS 3203 (pdf) 1982 Methods of testing local thickness of electroplated coatings_
IS 3266 (pdf)
IS 3266 (txt) 1982 Electroplated coatings of gold for general engineering purposes
IS 3420 (pdf)
IS 3420 (txt) 1976 Procedure for inspection and testing of aluminium alloy sheets and strips for aircraft purposes
IS 3436 (pdf)
IS 3436 (txt) 1978 Aluminium clad aluminium alloy sheet and strip for aircraft purposes (Alloy 24345)
IS 3577 (pdf) 1992 Wrought aluminium and aluminium alloys rivet, bolt and screw stock – Dimensions and tolerances
IS 3655 (pdf)
IS 3655 (txt) 1985 Recommended practice for electroplating
IS 3656 (pdf)
IS 3656 (txt) 1968 Code of recommended practice for mechanical polishing of metals for electroplating
IS 3821 (pdf)
IS 3821 (txt) 1973 Methods for determination of weight of coating on hot-dip aluminized iron and steel articles
IS 3965 (pdf)
IS 3965 (txt) 1981 Dimensions for wrought aluminium and aluminium alloy bar, rod and section
IS 4026 (pdf) 2007 Aluminium ingots billets and wire bars (EC grade)
IS 4736 (pdf)
IS 4736 (txt) 1986 Hot-dip Zinc Coatings on Mild Steel Tubes
IS 4759 (pdf)
IS 4759 (txt) 1996 Hot-dip zinc coatings on structural steel and other allied products
IS 5047-1 (pdf)
IS 5047-1 (txt) 1986 Glossary of Terms Relating to Aluminium Aluminium Alloys, Part 1: Unwrought and Wrought Metals
IS 5047-2 (pdf)
IS 5047-2 (txt) 1979 Glossary of Terms Relating to Aluminium and Aluminium Alloys, Part II: Plant and Operations, Thermal Treatment, Control and Testing, Finishing
IS 5047-3 (pdf)
IS 5047-3 (txt) 1979 Glossary of Terms Relating to Aluminium and Aluminium Alloys, Part III: Geometrical Properties and Tolerance, Structural and Surface Defects
IS 5052 (pdf)
IS 5052 (txt) 1993 Aluminium and its alloys – Temper designations
IS 5082 (pdf)
IS 5082 (txt) 1998 Wrought aluminium and aluminium alloy bars, rods, tubes and sections for electrical purposes
IS 5425-1 (pdf) 1969 Methods of chemical analysis of misch metal, Part 1: Determination of cerium
IS 5425-2 (pdf) 1984 Methods of chemical analysis of misch metal, Part 2: Determination of total rare earths
IS 5425-3 (pdf) 1987 Methods of chemical analysis of misch metal, Part 3: Determination of iron
IS 5425-4 (pdf) 1987 Methods of chemical analysis of misch metal, Part 4: Determination of aluminium
IS 5425-5 (pdf) 1987 Methods of chemical analysis of misch metal, Part 5: Determination of carbon
IS 5484 (pdf)
IS 5484 (txt) 1997 EC grade aluminium rod produced by continuous casting and rolling
IS 5523 (pdf)
IS 5523 (txt) 1983 Methods of Testing Anodic Coatings on Aluminium and its Alloys
IS 5528 (pdf)
IS 5528 (txt) 1985 Method of testing corrosion resistance of electroplated and anodized aluminium coating by copper accelerated acetic acid salt spray (CASS) test
IS 5555 (pdf) 1970 Code of procedure for conducting field studies on atmospheric corrosion of metals
IS 5905 (pdf)
IS 5905 (txt) 1989 Sprayed aluminium and zinc coatings on iron and steel
IS 5925 (pdf)
IS 5925 (txt) 1970 Recommended practice for silver plating for general engineering purposes
IS 6051 (pdf)
IS 6051 (txt) 1970 Code for designation of aluminium and its alloys
IS 6477 (pdf)
IS 6477 (txt) 1983 Dimensions for wrought aluminium and aluminium alloys, extruded hollow section
IS 6694 (pdf) 1999 Magnesium Ingots
IS 6751 (pdf) 1972 Aluminium Alloy Castings and Strips for Bearings
IS 6754 (pdf) 1972 Aluminium Alloy Ingots for Bearings
IS 7092-1 (pdf)
IS 7092-1 (txt) 1992 Aluminium Alloy Tubes for Irrigation Purposes, Part 1: Welded Tubes
IS 7092-2 (pdf) 1987 Aluminium Alloy Tube for Irrigation Purposes, Part 2: Extruded Tube
IS 7428 (pdf)
IS 7428 (txt) 1974 Aluminium alloy extruded bars, rods and sections (for aircraft purposes) (Alloy 24345)
IS 7429 (pdf)
IS 7429 (txt) 1974 Procedure for inspecction and testing of aluminium and aluminium alloy extruded bars, rods and sections (for aircraft purposes)
IS 7658 (pdf)
IS 7658 (txt) 1975 Spectrographic analysis of aluminium
IS 7670 (pdf)
IS 7670 (txt) 2002 Aluminium Alloy Forging Stock and Forgings (for Parts Operated at Elevated Temperatures) for Aircraft Purposes (Alloy 22588)
IS 7674 (pdf)
IS 7674 (txt) 1975 Procedure for inspection and testing of aluminium and aluminium alloy forging stock and forgings for aircraft purposes
IS 7793 (pdf)
IS 7793 (txt) 1975 Aluminium alloys for IC engine pistons
IS 7882 (pdf)
IS 7882 (txt) 1975 Aluminium alloy sheet and strip for aircraft purposes (Alloy 19000)
IS 7883 (pdf)
IS 7883 (txt) 1975 Aluminium-manganese sheet and strip for aircraft purposes (Alloy 31000)
IS 7902 (pdf)
IS 7902 (txt) 2001 Aluminium alloy forging stock and forgings for aircraft purposes (Alloy 24345)
IS 8474 (pdf)
IS 8474 (txt) 1977 Procedure for inspection and testing of aluminium and aluminium alloy wires (for rivets) for aircraft purposes
IS 8513 (pdf) 1977 Aluminium alloy wire for cold forged rivets for aircraft purposes (Alloy 55000)
IS 8514 (pdf) 1977 Aluminium alloy wire for cold forged rivets for aircraft purposes (Alloy 24530)
IS 8515 (pdf) 1977 Aluminium Wire for Cold Forged Rivets for Aircraft Purposes (Alloy 19500)
IS 8560 (pdf)
IS 8560 (txt) 1977 Aluminium clad aluminium alloy sheet and strip for aircraft purposes (Alloy 24530)
IS 8561 (pdf)
IS 8561 (txt) 1977 Aluminium alloy clad sheet and strip for aircraft purposes (Alloy 76528)
IS 8936 (pdf)
IS 8936 (txt) 1978 Aluminium alloy for wire for cold forged rivets for aircraft purposes (Alloy 24350)
IS 8937 (pdf)
IS 8937 (txt) 1978 Aluminium alloy wire for cold forged rivets for aircraft purposes (Alloy 22500)
IS 8938 (pdf)
IS 8938 (txt) 1978 Aluminium alloy wire for cold forged rivets for aircraft purposes(Alloy 24345)
IS 9612 (pdf) 1980 Aluminium tubes for refrigeration purposes
IS 9997 (pdf) 1991 Aluminium alloy redraw rods for electrical purposes
IS 10117 (pdf)
IS 10117 (txt) 2000 Code of Practice for Passivation of Stainless Steel Articles, Industrial Equipments and Components Including Pipelines
IS 10173 (pdf)
IS 10173 (txt) 1982 Recommended practice for preparation of zinc alloy die castings for electroplating
IS 10209 (pdf)
IS 10209 (txt) 1982 Electroplated coatings of tin-lead alloy (solder)
IS 10221 (pdf)
IS 10221 (txt) 2008 Coating and wrapping of underground mild steel pipelines – Code of practice
IS 10257 (pdf)
IS 10257 (txt) 1982 Aluminium foil stock
IS 10259 (pdf)
IS 10259 (txt) 1982 General conditions for delivery and inspection of aluminium and aluminium alloy products
IS 11035 (pdf)
IS 11035 (txt) 1984 Methods for spectrographic analysis of wrought aluminium alloys
IS 11268 (pdf)
IS 11268 (txt) 1985 Method for estimation of loss of absorptive power of anodic oxide coatings after sealing dye spot test with prior acid treatment for anodized aluminium and its alloys
IS 11804 (pdf)
IS 11804 (txt) 1986 Code of practice for manufacture of aluminium alloy pressure die castings
IS 11861 (pdf)
IS 11861 (txt) 1986 Titanium and titanium alloy strip, sheet and plate
IS 11890 (pdf)
IS 11890 (txt) 1987 High purity aluminium ingot for remelting for special applications
IS 11901 (pdf)
IS 11901 (txt) 1986 Titanium Sponge
IS 11902 (pdf)
IS 11902 (txt) 1986 Titanium and titanium alloy bars and billets
IS 11998 (pdf) 1987 Aluminium for the manufacture of alloys for IC engine pistons
IS 12308-7 (pdf)
IS 12308-7 (txt) 1991 Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 7: Determination of nickel by dimethyl glyoxime (gravimetric) method(for nickel 0.5 to 36 percent)
IS 12389 (pdf)
IS 12389 (txt) 1988 Seamless and Welded Titanium and Titanium Alloy Fittings
IS 12393 (pdf)
IS 12393 (txt) 1988 Electroplated coatings of nickel
IS 12442 (pdf)
IS 12442 (txt) 1988 Seamless and welded titanium and titanium alloy tubes for condensers and heat exchangers
IS 12560 (pdf)
IS 12560 (txt) 1988 Code of practice for cathodic protection of heat exchangers and condensers
IS 12594 (pdf) 1988 Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement
IS 12643 (pdf)
IS 12643 (txt) 1989 Corrosion Protection of Steel by Fibreglass Reinforced Polyester Lining – Code of Practice
IS 12644 (pdf)
IS 12644 (txt) 1989 Titanium and Titanium Alloy Pipe, Seamless and Welded
IS 12753 (pdf)
IS 12753 (txt) 1989 Electrogalvanized Coatings on Round Steel Wire
IS 12828 (pdf)
IS 12828 (txt) 1989 Recommended practice for descaling and cleaning titanium and titanium alloy surfaces
IS 13147 (pdf) 1991 Black Oxide Coating on Stainless Steel Parts
IS 13177 (pdf) 1991 Passivation of stainless steel parts
IS 13212 (pdf) 1991 Blackoxide coatings for iron and steel parts
IS 13647 (pdf)
IS 13647 (txt) 1993 Electroplated coatings of rhodium for engineering purposes
IS 13677 (pdf)
IS 13677 (txt) 1993 Electronless nickel – phosphorus coatings
IS 14126 (pdf)
IS 14126 (txt) 1994 Metallic coatings – measurement of thickness – coulometric method ISO 2177
IS 14149 (pdf)
IS 14149 (txt) 2008 Metallic and non-metallic coatings – Measurement of thickness – Beta backscatter method ISO 3543
IS 14191 (pdf)
IS 14191 (txt) 1996 Corrosion of Metals and alloys – classification of corrosivity of atmosphere
IS 14297 (pdf) 1995 Corrosion of metals and alloys – Corrositivity of atmospheres-Determination of corrosion rate of standard specimens for the evaluation of corrosivity
IS 14321 (pdf)
IS 14321 (txt) 1995 Corrosion of metals and alloys – Recommended values for the corrosivity categories of atmosphlures
IS 14322 (pdf)
IS 14322 (txt) 1996 Corrosion of Metals and Alloys – Corrosivity of atmosphere – Measurement of pollution – Methods
IS 14503 (pdf)
IS 14503 (txt) 1998 Testing of phosphate coatings – Methods
IS 14712 (pdf) 1999 Wrought Aluminium and Its Alloys – Chequered/tread Sheets for General Engineering Purposes
IS 15337 (pdf)
IS 15337 (txt) 2003 Coal Tar Based Anticorrosion Tape for Protection of Underground Mild Steel Pipelines
IS 15392 (pdf)
IS 15392 (txt) 2003 Aluminium and Aluminium Alloy Bare Foil for Food Packaging
IS 15659-1 (pdf)
IS 15659-1 (txt) 2006 Petroleum and natural gas industries – external coatings for burried or submerged pipelines used in pipeline transportation of gas and liquid hydrocarbons, Part 1: Polyolefin coatings (3 layer PE and 3 Layer PP)
IS 15659-2 (pdf)
IS 15659-2 (txt) 2006 Petroleum and natural gas industries – external coatings for burried or submerged pipelines used in pipeline transportation of gas and liquid hydrocarbons, Part 2: Fusion Bonded epoxy coatings
IS 16011 (pdf)
IS 16011 (txt) 2012 Aluminium and Aluminium Alloy Foil for Pharmaceutical Packaging – Specification
IS 16012 (pdf)
IS 16012 (txt) 2012 Poly-Laminated Aluminium Cable Wrap – Specification
SP 1 (pdf)
SP 1 (txt) 1967 Comparison of Indian and Overseas Standards on Aluminium Alloy Castings
SP 14 (pdf) 1976 Index to Steel Designations
SP 17 (pdf)
SP 17 (txt) 1979 Index to IS 1956 Glossary of Terms Relating to Iron and Steel
IS 28 (pdf) 1985 Phosphor bronze ingots and castings
IS 191 (pdf)
IS 191 (txt) 2007 Copper
IS 288 (pdf)
IS 288 (txt) 1981 Arsenical copper rods for boiler stay bolts and rivets
IS 291 (pdf)
IS 291 (txt) 1989 Machining Purposes
IS 292 (pdf) 1983 Leaded Brass Ingots and Castings
IS 304 (pdf)
IS 304 (txt) 1981 High Tensile Brass Ingots and Castings
IS 305 (pdf)
IS 305 (txt) 1981 Aluminium Bronze Ingots and Castings
IS 306 (pdf) 1983 Tin bronze ingots and castings
IS 318 (pdf) 1981 Leaded Tin Bronze Ingots and Castings
IS 319 (pdf)
IS 319 (txt) 2007 Free Cutting Brass Bars, Rods and Section
IS 320 (pdf) 1980 High Tensile Brass Rods and Sections (Other Than Forging Stock)
IS 407 (pdf) 1981 Brass Tubes for General Purposes
IS 410 (pdf) 1977 Cold rolled brass sheet, strip and foil
IS 422 (pdf)
IS 422 (txt) 1981 Brass Sheet and Strip for the Manufacture of Utensils
IS 440 (pdf)
IS 440 (txt) 1964 Methods of chemical analysis of copper BS 1225
IS 531 (pdf)
IS 531 (txt) 1981 Leaded brass strips for instrument parts
IS 613 (pdf)
IS 613 (txt) 2000 Copper Rods and Bars for Electrical Purposes
IS 1028 (pdf)
IS 1028 (txt) 1987 Silicon Bronze Ingots and Castings
IS 1264 (pdf) 1997 Brass gravity die castings (ingots and castings)
IS 1408 (pdf)
IS 1408 (txt) 1968 Recommended Procedure for Inspection of Copper-base Alloy Sand Castings
IS 1458 (pdf) 1965 Railway bronze ingots and casting
IS 1545 (pdf)
IS 1545 (txt) 1994 Solid drawn copper and copper alloy tubes for condenser and heat exc hangers
IS 1897 (pdf)
IS 1897 (txt) 2008 Copper strip for electrical purposes
IS 2283 (pdf)
IS 2283 (txt) 2000 Nickel Silver Sheet, Strip Specification
IS 2305 (pdf) 1988 Method for mercurous nitrate test for copper and copper alloys
IS 2376 (pdf)
IS 2376 (txt) 1963 Colour code for the identification of copper, copper alloys
IS 2378 (pdf) 1974 Code for designation of copper and copper alloys
IS 2451 (pdf) 1994 Copper Alloys – Nickel Silver – Ingots and Castings
IS 2501 (pdf)
IS 2501 (txt) 1995 Solid Drawn Copper Tubes for General Engineering Purposes
IS 2704 (pdf) 1983 Brass wires for cold-headed and machined parts
IS 2768 (pdf)
IS 2768 (txt) 1982 Copper alloy strip for bullet envelope
IS 2826 (pdf)
IS 2826 (txt) 1986 Dimensions and tolerances for copper and copper alloy rods and bars for general engineering purposes
IS 3051 (pdf) 1988 Dimensions and tolerances for wrought copper and copper alloy plate
IS 3052 (pdf)
IS 3052 (txt) 1986 Dimensions and tolerances for wrought copper and copper alloy sheet, strip and foil for general engineering purposes
IS 3091 (pdf)
IS 3091 (txt) 1999 Aluminium Bronze Ingots and Castings for Overhead Fittings in Electric Traction
IS 3167 (pdf)
IS 3167 (txt) 1982 Cap copper alloy strip
IS 3168 (pdf)
IS 3168 (txt) 1981 Brass Strip and Foil for Deep Drawing
IS 3186 (pdf)
IS 3186 (txt) 1965 Methods of chemical analysis of cadmium copper
IS 3187 (pdf)
IS 3187 (txt) 1965 Methods of chemical analysis of copper-nickel zinc alloys
IS 3288-1 (pdf)
IS 3288-1 (txt) 1986 Glossary of Terms Relating to Copper and Copper Alloys, Part 1: Materials
IS 3288-2 (pdf) 1986 Glossary of Terms Relating to Copper and Copper Alloys, Part 2: Unwrought form and cast form
IS 3288-3 (pdf)
IS 3288-3 (txt) 1986 Glossary of Terms Relating to Copper and Copper Alloys, Part 3: Wrought forms
IS 3288-4 (pdf)
IS 3288-4 (txt) 1986 Glossary of Terms Relating to Copper and Copper Alloys, Part 4: Processing
IS 3288-5 (pdf) 1986 Glossary of Terms Relating to Copper and Copper Alloys, Part 5: Heat treatment
IS 3288-6 (pdf) 1986 Glossary of Terms Relating to Copper and Copper Alloys, Part 6: Finishes
IS 3288-7 (pdf)
IS 3288-7 (txt) 1986 Glossary of Terms Relating to Copper and Copper Alloys, Part 7: Dimensional surfaces and structural characterstics
IS 3288-8 (pdf) 1986 Glossary of Terms Relating to Copper and Copper Alloys, Part 8: Packing
IS 3331 (pdf)
IS 3331 (txt) 2007 Copper and brass strips/foils for radiator cores
IS 3685 (pdf)
IS 3685 (txt) 1966 Methods of chemical analysis of brasses
IS 3863 (pdf)
IS 3863 (txt) 1966 Methods of chemical analysis of copper-tellurium alloys
IS 4027-1 (pdf)
IS 4027-1 (txt) 1987 Methods of chemical analysis of bronzes, Part 1: Determination of copper and lead by electrolytic method
IS 4027-2 (pdf)
IS 4027-2 (txt) 1987 Methods of chemical analysis of bronzes, Part 2: Determination of manganese-photometric method
IS 4027-3 (pdf)
IS 4027-3 (txt) 1987 Methods of chemical analysis of bronzes, Part 3: Determination of phosphorus by volumetric method
IS 4027-4 (pdf)
IS 4027-4 (txt) 1987 Methods of chemical analysis of bronzes, Part 4: Determination of nickel-dimethylglyoxime photometric method
IS 4027-5 (pdf)
IS 4027-5 (txt) 1987 Methods of chemical analysis of bronzes, Part 5: Determination of tin-iodimetric method
IS 4027-6 (pdf)
IS 4027-6 (txt) 1987 Methods of chemical analysis of bronzes, Part 6: Determination of zinc by complexometric (EDTA) method
IS 4027-7 (pdf) 1990 Methods of chemical analysis of bronzes, Part 7: Determination of antimony by Rhodamine B spectrophotometric method
IS 4027-8 (pdf)
IS 4027-8 (txt) 1991 Methods of chemical analysis of bronzes, Part 8: Determination of iron
IS 4027-9 (pdf)
IS 4027-9 (txt) 1991 Methods of chemical analysis of bronzes, Part 9: Determination of aluminium by AAS method
IS 4027-10 (pdf)
IS 4027-10 (txt) 2000 Chemical Analysis of Bronzes – Methods, Part 10: Determination of Silicon
IS 4027-11 (pdf)
IS 4027-11 (txt) 2000 Chemical Analysis of Bronzes – Methods, Part 11: Determination of Lead – Ethylenediamine Tetra-acetic Acid (EDTA) – Titrimetric Method
IS 4076 (pdf) 1983 Hard brass wires for springs and other special purposes
IS 4131 (pdf)
IS 4131 (txt) 1967 Nickel copper alloy castings
IS 4170 (pdf) 1967 Brass rods for general engineering purposes
IS 4171 (pdf) 1983 Copper rods and bars for general engineering purposes
IS 4412 (pdf) 1981 Copper wires for general engineering purposes
IS 4413 (pdf) 1981 Brass wires for general engineering purposes
IS 4519 (pdf)
IS 4519 (txt) 1977 Dimensions for copper commutator bars
IS 4548-1 (pdf)
IS 4548-1 (txt) 1967 Methods of chemical analysis of copper gold brazing alloys, Part 1: Analysis of gold and copper
IS 4646-1 (pdf)
IS 4646-1 (svg)
IS 4646-1 (html)
IS 4646-1 (txt) 1968 Methods of chemical analysis of copper phosphorus brazing alloys, Part 1 Analysis for silver and copper
IS 4646-2 (pdf)
IS 4646-2 (txt) 1976 Methods of chemical analysis of copper phosphorus brazing alloys, Part 2: Determination of phosphorus
IS 4667-1 (pdf)
IS 4667-1 (txt) 1968 Methods of chemical analysis of silver copper brazing alloys, Part 1: Analysis for silver and copper
IS 4667-2 (pdf)
IS 4667-2 (txt) 1969 Methods of chemical analysis of silver copper brazing alloys, Part 2: Determination of silver, copper and tin
IS 4667-3 (pdf) 2001 Chemical Analysis of Silver-Copper Brazing Alloys, Part 3: Determination of Nickel
IS 4667-4 (pdf) 2001 Chemical Analysis of Silver-Copper Brazing Alloys, Part 4: Determination of Silver, Copper, Cadmium and Zinc -Electolytic Method
IS 5053 (pdf) 1969 Dimensions for wrought copper and copper alloy rods for fasteners
IS 5493 (pdf)
IS 5493 (txt) 1981 Dimensions for wrought copper and copper alloy tubes
IS 5743 (pdf) 1991 Copper master alloys –
IS 5744 (pdf) 1991 Copper alloy screwed ferrules for condenser, heater and cooler tubes
IS 5885 (pdf)
IS 5885 (txt) 1977 Copper for commutator bars
IS 6912 (pdf)
IS 6912 (txt) 2005 Copper and copper alloy forging stock and forgings
IS 7608 (pdf) 1987 Phosphor bronze wire for general engineering purposes
IS 7811 (pdf) 1985 Phosphor bronze rods and bars
IS 7814 (pdf)
IS 7814 (txt) 2005 Phosphor bronze sheet, strip AND Foil – Specificat8ion
IS 8328 (pdf)
IS 8328 (txt) 2007 Free cutting copper bars, rods and sections
IS 8362 (pdf)
IS 8362 (txt) 1977 Copper and copper alloy rolled plates for condensers and heat exchangers
IS 8364 (pdf)
IS 8364 (txt) 1989 Free cutting brass wire
IS 8365 (pdf)
IS 8365 (txt) 1991 Copper alloys for spot and seam resistance welding electrodes
IS 8631 (pdf)
IS 8631 (txt) 1977 Copper base alloys for marine propellers
IS 8859 (pdf)
IS 8859 (txt) 1978 Cast copper tuyere
IS 9682 (pdf)
IS 9682 (txt) 1980 Recommended procedure for inspection of cast copper tuyeres
IS 9713 (pdf)
IS 9713 (txt) 1983 Hot rolled electrolytic copper wire rod for electrical conductors
IS 9805 (pdf) 1981 High conductivity copper castings
IS 9861 (pdf)
IS 9861 (txt) 1981 Dimensions for wrought copper and copper alloy wires for general engineering purposes
IS 10569 (pdf)
IS 10569 (txt) 2005 Aluminnium bronze rods, bars and sections
IS 10709 (pdf) 1983 Brass wires for fourdrinier cloth
IS 10710 (pdf) 1983 Phosphor bronze wires used for fourdrinier cloth
IS 10742 (pdf)
IS 10742 (txt) 1983 Cast gun metal rods and bars
IS 10757 (pdf) 1983 Nickel silver rods and bars
IS 10773 (pdf)
IS 10773 (txt) 1995 Wrought Copper Tubes for Refrigeration and Air-Conditioning Purposes
IS 11109 (pdf)
IS 11109 (txt) 1984 Silicon brass ingots and castings
IS 12228 (pdf) 1987 Method for scale adhesion test for oxygen free copper ISO 4746
IS 12443 (pdf) 1988 Rolled Brass Plates for General Engineering Purposes
IS 12444 (pdf) 1988 Continuously cast and rolled electrolytic copper wire rods for electrical conductors
IS 12558 (pdf) 1988 Recommended shape, size and mass of copper and copper alloy ingots for remelting purposes
IS 14340 (pdf) 1996 Brass for current carrying parts in electrical wiring accessories
IS 14810 (pdf)
IS 14810 (txt) 2000 Copper Tubes for Plumbing
IS 14811 (pdf)
IS 14811 (txt) 2000 Rolled Copper Plate, Sheet, Strip and Foils for General Engineering Purposes
IS 25 (pdf)
IS 25 (txt) 1979 antifriction bearing alloys
IS 26 (pdf) 1992 Tin Ingot
IS 27 (pdf) 1992 Pig Lead
IS 193 (pdf)
IS 193 (txt) 2000 Soft Solder
IS 209 (pdf)
IS 209 (txt) 1992 Zinc Ingot
IS 211 (pdf) 1992 Antimony Ingot
IS 403 (pdf)
IS 403 (txt) 1964 Methods of chemical analysis of lead and antimonial lead
IS 404-1 (pdf)
IS 404-1 (txt) 1993 Lead pipes, Part 1: For other than chemical purposes
IS 404-2 (pdf)
IS 404-2 (txt) 1993 Lead pipes, Part 2: For chemical purposes
IS 405-1 (pdf)
IS 405-1 (txt) 1992 Lead sheets and strips, Part 1: For chemical purposes
IS 405-2 (pdf) 1992 Lead Sheets and Strips, Part 2: For other than chemical purposes
IS 406 (pdf)
IS 406 (txt) 1964 Methods of chemical analysis of slab zinc (spelter)
IS 713 (pdf)
IS 713 (txt) 1981 Zinc base alloy ingots for die casting
IS 742 (pdf)
IS 742 (txt) 1981 Zinc base alloy die castings
IS 998-1 (pdf)
IS 998-1 (txt) 1983 Methods of chemical analysis of solders (soft and rosin cored) Part 1 Determination of tin and antimony
IS 998-2 (pdf)
IS 998-2 (txt) 1983 Methods of chemical analysis of solders (soft and rosin cored) Part 2 Determination of iron,copper and arsenic
IS 998-3 (pdf)
IS 998-3 (txt) 1983 Methods of chemical analysis of solders (soft and rosin cored) Part 3 Determination of cadmium, zinc, aluminium, bismuth and nickel
IS 999 (pdf)
IS 999 (txt) 1959 Methods of Chemical Analysis of Brazing Solder
IS 1047 (pdf)
IS 1047 (txt) 1965 Methods of chemical analysis of antimony
IS 1409 (pdf)
IS 1409 (txt) 1959 Methods of chemical analysis of antifriction bearing alloys
IS 1654 (pdf)
IS 1654 (txt) 1992 Lead antimony alloys
IS 1655 (pdf)
IS 1655 (txt) 1991 Zinc alloys – Code of practice for manufacture of pressure die castings
IS 1921 (pdf)
IS 1921 (txt) 2005 Rosin-cored solder wire
IS 1940 (pdf)
IS 1940 (txt) 1969 Methods of chemical analysis of tin ingot
IS 1952 (pdf) 1963 Methods of chemical analysis of nickel anodes
IS 2258 (pdf)
IS 2258 (txt) 1981 Rolled zinc plate, sheet and strip
IS 2390 (pdf)
IS 2390 (txt) 1967 Methods for chemical analysis of foundry nickel
IS 2599 (pdf)
IS 2599 (txt) 1983 Methods for spectrographic analysis of high purity zinc and zinc base alloys for die casting
IS 2600-1 (pdf)
IS 2600-1 (txt) 1988 Methods of chemical analysis of zinc and zinc base alloys for die castings, Part 1: Determination of copper, iron, nickel, tin and thallium by spectrophotometric method
IS 2600-2 (pdf) 1988 Methods of chemical analysis of zinc and zinc base alloys for die castings, Part 2: Determination of copper,iron, lead and cadmium by atomic absorption spectrophotometric method
IS 2600-3 (pdf)
IS 2600-3 (txt) 1993 Methods of chemical analysis of zinc and zinc base alloys for die castings, Part 3: Determination of Indium by atomic absorption spectrometry method
IS 2600-4 (pdf) 1993 Methods of chemical analysis of zinc and zinc base alloys for die castings, Part 4: Determination of chromium by spectrophotometric method
IS 2766-1 (pdf)
IS 2766-1 (txt) 1968 Methods of Chemical Analysis of Primary Nickel – Part I
IS 3717 (pdf) 1977 Refined secondary lead
IS 4280 (pdf) 1992 Refined secondary tin ingot
IS 4354-1 (pdf)
IS 4354-1 (txt) 1967 Methods of chemical analysis of magnesium, aluminium brazing alloys, Part 1 Analysis of aluminium, manganese, zinc and silicon
IS 4699 (pdf)
IS 4699 (txt) 1984 Refined secondary zinc
IS 5479 (pdf)
IS 5479 (txt) 1985 Solders for jointing aluminium and aluminium alloys
IS 6344 (pdf)
IS 6344 (txt) 2006 Cadmium metal
IS 6516 (pdf)
IS 6516 (txt) 1972 Methods for chemical analysis of tin and lead in secondary tin
IS 8097 (pdf)
IS 8097 (txt) 1976 Methods of chemical analysis of soft solders for jointing aluminium and aluminium alloys
IS 8439 (pdf) 1977 Methods for sampling of lead and lead alloys
IS 8475 (pdf) 1977 Lead based antifriction bearing alloy for heavy duty applications
IS 8812-1 (pdf)
IS 8812-1 (txt) 1978 Methods for chemical analysis of hard solders for jointing aluminium and aluminium alloys, Part 1 Determination of silver, copper, zinc, antimony ,arsenic, iron and bismuth
IS 8812-2 (pdf)
IS 8812-2 (txt) 1982 Methods for chemical analysis of hard solders for jointing aluminium and aluminium alloys, Part 2 Determination of aluminium
IS 8816 (pdf)
IS 8816 (txt) 1978 Methods for selection and preparation of samples for spectrographic analysis of zinc and zinc alloy ingots
IS 11516 (pdf) 2005 Soft solder for electronic applications
IS 11900 (pdf)
IS 11900 (txt) 1986 Tungsten rods and tungsten wire for lamps and electron devices
IS 12445 (pdf) 1988 Molybdenum plate, sheet, strip and foil
IS 12447 (pdf)
IS 12447 (txt) 1988 Zinc wire for sprayed zinc coatings
IS 12465 (pdf)
IS 12465 (txt) 1988 Molybdenum wires for lighting and electronic application
IS 13229 (pdf) 1991 Zinc for galvanizing
IS 13350 (pdf) 1992 Molybdenum rod
IS 13351 (pdf)
IS 13351 (txt) 1992 Thoriated tungesten wires and rods
IS 13923 (pdf) 1993 Lead seal
IS 13963-1 (pdf)
IS 13963-1 (txt) 1994 Chemical analysis of cadmium metal, Part 1: Determination of copper, zinc, lead and iron
IS 13963-2 (pdf)
IS 13963-2 (txt) 1994 Chemical analysis of cadmium metal, Part 2: Determination of nickel, arsenic, antimony and thallium by spectrometric methods
IS 13982 (pdf)
IS 13982 (txt) 1994 Zinc Alloys for Hot-Dip Coatings – Zinc – 5 Percent Aluminum – Mischmetal Alloy – Specification
IS 14644-1 (pdf)
IS 14644-1 (txt) 1998 Nickel Alloys – Flame Atomic Absorption Spectrometric Analysis – Method, Part 1: General Requirements and Sample Dissolution ISO 7530-1-1
IS 14644-2 (pdf)
IS 14644-2 (txt) 1998 Part 2 Determination of cobalt content ISO 7530-2
IS 14644-3 (pdf)
IS 14644-3 (txt) 1998 Part 3 Determination of chromium content ISO 7530-3
IS 14644-4 (pdf)
IS 14644-4 (txt) 1998 Determination of copper content ISO 7530-4
IS 14644-5 (pdf)
IS 14644-5 (txt) 1998 Part 5 Determination of iron content ISO 7530-5
IS 14644-6 (pdf)
IS 14644-6 (txt) 1998 Part 6 Determination of manganese content ISO 7530-6
IS 14644-7 (pdf)
IS 14644-7 (txt) 2000 Nickel Alloys – Flame Atomic Absorption Spectrometric Analysis – Method, Part 7: Determination of Aluminium Content ISO 7530 -7
IS 14644-8 (pdf)
IS 14644-8 (txt) 2000 Nickel Alloys – Flame Atomic Absorption Spectrometric Analysis – Method, Part 8: Determination of Silicon Content ISO 7530-8
IS 14644-9 (pdf)
IS 14644-9 (txt) 2000 Nickel Alloys – Flame Atomic Absorption Spectrometric Analysis – Method, Part 9: Determination of Vanadium Content ISO 7530-9
IS 14651 (pdf)
IS 14651 (txt) 1999 Multi Filamentary Niobium-titanium (Nbti) Superconductor Wires
IS 14688 (pdf)
IS 14688 (txt) 1999 Lead-Antimony Alloy Bricks for Radiation Shielding
IS 639 (pdf) 1982 Gold Leaf
IS 964 (pdf)
IS 964 (txt) 1956 Methods for chemical analysis of silver solder
IS 1417 (pdf) 1999 Gold and Gold Alloys, Jewellery/Artefacts – Fineness and Marking
IS 1418 (pdf)
IS 1418 (txt) 2009 Determination of Gold in Gold Bullion, Gold Alloys and Gold Jewellery/Artefacts – Cupellation (Fire Assay) Method
IS 1953 (pdf) 1973 Methods of chemical analysis of silver anodes
IS 2112 (pdf) 2003 Silver and Silver Alloys, Jewellery/Artefacts – Fineness and Marking
IS 2113 (pdf) 2002 Assaying Silver in Silver and Silver Alloys – Methods
IS 2270 (pdf)
IS 2270 (txt) 1965 Method for assaying of platinum and platinum alloys
IS 2271 (pdf)
IS 2271 (txt) 1967 Recommended method for spectrographic analysis of platinum
IS 2275 (pdf) 1984 Grades of platinum
IS 2279 (pdf)
IS 2279 (txt) 1980 Fine silver bar, sheet, wire, granules and token
IS 2767 (pdf)
IS 2767 (txt) 1984 Gold thread (silver base)
IS 2790 (pdf)
IS 2790 (txt) 1999 Guidelines for Manufacture of 23, 22, 21, 18, 14 and 9 Carat Gold Alloys
IS 3088 (pdf) 1967 Method for assaying of fine grade palladium
IS 3095 (pdf) 1999 Gold Solders for Use in Manufacture of Jewellery
IS 3096 (pdf) 1965 Fine grade palladium
IS 3110 (pdf) 1982 Silver Leaf
IS 3111 (pdf) 1984 Silver thread
IS 3112 (pdf) 1984 Gold and silver embroidery materials
IS 3571 (pdf)
IS 3571 (txt) 1985 Dental gold solders
IS 3578 (pdf)
IS 3578 (txt) 1985 Dental Gold Alloy Wire
IS 3610 (pdf) 1985 Dental gold foil
IS 4134 (pdf) 1967 Recommended colour classification of rough diamonds
IS 4703 (pdf) 1968 Methods of chemical analysis of silver-manganese brazing alloys
IS 4704 (pdf) 1985 Silver-tin Dental Amalgam Alloy
IS 4705 (pdf) 1985 Dental Mercury
IS 4799 (pdf)
IS 4799 (txt) 1985 Dental casting gold alloys, non-porcelain bonding
IS 5954 (pdf)
IS 5954 (txt) 1985 Dental white gold alloys
IS 6018 (pdf) 1993 Platinum, platinum rhodium catalyst gauges
IS 6019 (pdf) 1993 Platinum dish
IS 6170 (pdf) 1971 Platinum crucible and lid
IS 6683 (pdf) 1998 Diameters of wires for platinum group metals and their alloys
IS 6882 (pdf) 1973 Platinum electrodes
IS 6889 (pdf)
IS 6889 (txt) 2000 Chemical Analysis of Silver-tin Dental Amalgam Alloy – Method
IS 6890-1 (pdf)
IS 6890-1 (txt) 1989 Method for chemical analysis of dental gold alloys, Part 1: Determination of gold, silver, palladium and platinum
IS 6890-2 (pdf)
IS 6890-2 (txt) 1975 Methods for Chemical Analysis of Dental Gold Alloys, Part II: Determination of Nickel and Zinc
IS 7225 (pdf) 1985 Dental cobalt chromium casting alloy
IS 7255-1 (pdf)
IS 7255-1 (txt) 1974 Methods of chemical analysis of solders for use in goldware, Part 1: Determination of gold, silver and copper
IS 7255-2 (pdf) 1977 Methods of Chemical Analysis of Solders for Use in Goldware, Part II: Determination of Cadmium and Zinc by Polarographic Method
IS 7562 (pdf) 1974 Gold cladding
IS 8858 (pdf) 1978 Methods for spectrographic analysis of fine silver ingot (grades 9999 and 999)
IS 8929 (pdf)
IS 8929 (txt) 1978 High purity gold wire for electrical contacts
IS 9443 (pdf) 1980 Guidelines for marking purity of silver on silver articles/ornaments
IS 9925 (pdf)
IS 9925 (txt) 1981 Method for determination of gold and silver in gold and silver thread and embroidery materials
IS 11084 (pdf)
IS 11084 (txt) 1984 Silver palladium alloy wire and strip for electrical contacts
IS 11095 (pdf)
IS 11095 (txt) 1984 Bi-metallic strips and bars with precious metal on phosphor bronze base for electrical contacts
IS 12144 (pdf)
IS 12144 (txt) 1987 Fine silver wire for electrical contacts
IS 12714 (pdf) 1989 Bi-metallic tape for electrical contacts
IS 13600 (pdf)
IS 13600 (txt) 1992 Chemical analysis of silver palladium alloys
IS 14741 (pdf) 1999 Colours of Gold Alloys – Definition, Range of Colours and Designation ISO 8654
IS 15329 (pdf)
IS 15329 (txt) 2003 Platinum and Platinum Alloys, Jewellery/Artefacts – Fineness and Marking
IS 15766-1 (pdf)
IS 15766-1 (txt) 2007 Grading of polished diamonds, Part 1: Classifications
IS 15766-2 (pdf)
IS 15766-2 (txt) 2007 Grading of polished diamonds, Part 2: Test Methods
IS 15820 (pdf)
IS 15820 (txt) 2009 General requirement for competence of assaying and hallmarking centres
IS 15892 (pdf) 2011 Jewellery – Ring-Sizes – Definition Measurement and Designation
IS 15893 (pdf)
IS 15893 (txt) 2011 Jewellery – Alloy Coatings
IS 15940 (pdf)
IS 15940 (txt) 2011 Jewellery – Determination of Platinum in Platinum Jewellery Alloys – Inductively Coupled Plasma (ICP) Solution – Spectrometric Method Using Yttrium as Internal Standard Element ISO 11494:2008
IS 15941 (pdf)
IS 15941 (txt) 2011 Jewellery – Determination of Palladium in Palladium Jewellery Alloys – Inductively Coupled Plasma (ICP) Solution – Spectrometric Method Using Yttrium as Internal Standard Element ISO 11495:2008
IS 812 (pdf) 1957 Glossary of terms relating to welding and cutting of metals
IS 813 (pdf)
IS 813 (txt) 1986 Scheme of symbols for welding
IS 814 (pdf)
IS 814 (txt) 2004 Covered Electrodes for Manual Metal Arc Welding of Carbon and Carbon Manganese Steel
IS 817-1 (pdf)
IS 817-1 (txt) 1992 Training of Welders – Code of Practice, Part 1: Manual metal arc welding
IS 817-2 (pdf)
IS 817-2 (txt) 1996 Training of Welders – Code of Practice, Part 2: Oxyfuel welding
IS 817 (pdf)
IS 817 (txt) 1966 Code of practice for training and testing of metal arc welders
IS 818 (pdf)
IS 818 (txt) 1968 Code of Practice for Safety and Health Requirements in Electric and Gas Welding and Cutting Operations
IS 822 (pdf)
IS 822 (txt) 1970 Code of procedure for inspection of welds
IS 1179 (pdf) 1967 Equipment for eye and face protection during welding
IS 1278 (pdf) 1972 Filler rods and wires for gas welding
IS 1393 (pdf)
IS 1393 (txt) 1961 Code of practice for training and testing of oxy acetylene welders
IS 1395 (pdf)
IS 1395 (txt) 1982 Low and medium alloy steel covered electrodes for manual metal arc welding
IS 2927 (pdf) 1975 brazing alloys
IS 3016 (pdf)
IS 3016 (txt) 1982 Code of practice for fire precautions in welding and cutting operations
IS 3600-1 (pdf) 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel, Part 1: Cruciform fillet weld tensile test
IS 3600-2 (pdf) 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel, Part 2: Beam impact (charpy V-notch) test
IS 3600-3 (pdf)
IS 3600-3 (txt) 2009 Destructive tests on welds in metallic materials, Part 3: transverse tensile test ISO 4136
IS 3600-4 (pdf) 1984 Method of Testing Fusion Welded Joints and Weld Metal in Steel, Part 4: Longitudinal tensile test on cylindrical weld metal test pieces on butt welds
IS 3600-5 (pdf)
IS 3600-5 (txt) 1983 Method of Testing Fusion Welded Joints and Weld Metal in Steel, Part 5: Transverse root and face bend test on butt welds ISO 5173
IS 3600-6 (pdf)
IS 3600-6 (txt) 1983 Method of Testing Fusion Welded Joints and Weld Metal in Steel, Part 6: Transverse side bend test on butt welds ISO 5177
IS 3600-7 (pdf)
IS 3600-7 (txt) 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel, Part 7: Longitudinal root and face bend test on butt welds
IS 3600-8 (pdf) 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel, Part 8: Nick break test and fillet weld fracture test
IS 3600-9 (pdf) 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel, Part 9: Macro and micro examination
IS 3613 (pdf) 1974 Acceptance tests for wire flux combination for submerged arc welding
IS 4943 (pdf)
IS 4943 (txt) 1968 Assessment of butt and fillet fusion welds in steel sheet, plate and pipe
IS 4972 (pdf)
IS 4972 (txt) 1968 Resistance spot welding electrodes
IS 5206 (pdf)
IS 5206 (txt) 1983 Covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels
IS 5511 (pdf)
IS 5511 (txt) 1991 Covered electrodes for manual metal arc welding of cast iron_
IS 5687 (pdf)
IS 5687 (txt) 1970 Glossary of terms relating to welding of plastics
IS 5856 (pdf)
IS 5856 (txt) 1991 Corrosion and heat resisting chromium-nickel steel solid welding rods, bare electrodes
IS 5857 (pdf) 1970 Nickel and nickel alloy bare solid welding rods and electrodes
IS 5897 (pdf)
IS 5897 (txt) 1985 Aluminium and aluminium alloy welding rods and wires and magnesium alloy welding rods
IS 5898 (pdf)
IS 5898 (txt) 1970 Copper and Copper Alloy Bare Solid Welding Rods and Electrodes
IS 5922 (pdf) 1970 Qualifying tests for welders engaged in aircraft welding
IS 6016 (pdf)
IS 6016 (txt) 2009 Gas Welding Equipment – Hose Connections for Equipment for Welding, Cutting and Allied Processes
IS 6419 (pdf) 1996 Welding rods and bare electrodes for gas shielded arc welding of structural steel
IS 6431 (pdf)
IS 6431 (txt) 1971 Tolerances on Dimensions of Plates Cut by Flame
IS 6560 (pdf)
IS 6560 (txt) 1996 Molybdenum and chromium-molybdenum low alloy steel welding rods and bare electrodes for gas shielded arc welding
IS 6901 (pdf)
IS 6901 (txt) 2009 Gas welding equipment – Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar ISO 2503
IS 7273 (pdf)
IS 7273 (txt) 1974 Method of testing fusion welded joints in aluminium and aluminium alloys
IS 7280 (pdf) 1974 Bare wire electrodes for submerged arc welding of structural steels
IS 7303 (pdf)
IS 7303 (txt) 1974 Covered electrodes for surfacing of metal by manual arc welding
IS 7307-1 (pdf) 1974 Approval tests for welding procedures, Part 1: fusion welding of steel
IS 7310-1 (pdf)
IS 7310-1 (txt) 1974 Approval Tests for Welders Working to Approved Welding Procedures, Part I: Fusion Welding of Steel
IS 7318-1 (pdf)
IS 7318-1 (txt) 1974 Approval Test for Welders When Welding Procedure Approval is Not Required, Part I: Fusion welding of Steel
IS 7318-2 (pdf)
IS 7318-2 (txt) 1974 Approval Tests for Welders when Welding Procedure Approval is not Required, Part II: Tig or Mig Welding of Aluminium and its Alloys
IS 7653 (pdf)
IS 7653 (txt) 1975 Manual blow pipes for welding and cutting
IS 8363 (pdf) 1976 Bare wire electrodes for electroslag welding of steels
IS 8484 (pdf)
IS 8484 (txt) 1998 Metal powders welding electrodes
IS 8666 (pdf)
IS 8666 (txt) 1977 Copper and copper alloy covered electrodes for manual metal arc welding
IS 8736 (pdf)
IS 8736 (txt) 1977 Nickel and nickel alloy covered electrodes for metal arc welding
IS 9495 (pdf)
IS 9495 (txt) 1980 Test for brazeability of brazing alloys
IS 10793 (pdf)
IS 10793 (txt) 1983 Classification of defects in metallic fusion welds with explanations
IS 10803 (pdf)
IS 10803 (txt) 1984 Method of sampling and preparation of weld pad for chemical analysis of weld metal from covered electrodes for manual metal arc welding
IS 10811 (pdf)
IS 10811 (txt) 1984 Oxygen and acetylene manifold regulators for welding, cutting and related processes
IS 10842 (pdf)
IS 10842 (txt) 1984 Evaluation Procedure for Y-groove Weld Crackability Test in Structural Steel
IS 11368-1 (pdf)
IS 11368-1 (txt) 1985 Comparison of Indian and overseas classification and coding of welding filler materials, Part 1: Flux coated mild steel and medium tensile steel electrodes for manual metal arc welding
IS 11802 (pdf)
IS 11802 (txt) 1986 Method of determination of diffusible hydrogen content of deposited weld metal from covered electrodes in welding mild and low alloy steels
IS 13007 (pdf)
IS 13007 (txt) 1991 Tungston electrodes for inert gas shielded arc welding and for plasma cutting and welding ISO 6848
IS 13043 (pdf) 1991 Covered Manual Metal Arc Welding Electrodes – Determination of Efficiency, Metal Recovery and Deposition Co-efficient ISO 2401
IS 13851 (pdf) 1993 Storage and redrying of covered electrodes before use – recommendations
IS 15387 (pdf) 2003 Resistance Spot Welding – Male Electrode Caps ISO 5830
IS 15769 (pdf)
IS 15769 (txt) 2008 Flux cored (tubular) electrodes for gas shielded and self-shielded metal welding of carbon or carbon-manganese steel
IS 15946 (pdf) 2012 Materials for Equipment used in Gas Welding, Cutting and Allied Processes ISO 9539:1988
IS 16003 (pdf)
IS 16003 (txt) 2012 Specification and Qualification of Welding Procedures for Metallic Materials – General Rules ISO 15607:2003
IS 816 (pdf)
IS 816 (txt) 1969 Code of practice for use of metal arc welding for general construction in mild steel
IS 819 (pdf)
IS 819 (txt) 1957 Code of Practice for Resistance Spot Welding for Light Assemblies in Mild Steel
IS 1024 (pdf)
IS 1024 (txt) 1999 Code of practice for use of welding in bridges and structures subject to dynamic loading
IS 1261 (pdf)
IS 1261 (txt) 1959 Code of practice for seam welding in mild steel
IS 1323 (pdf)
IS 1323 (txt) 1982 Code of practice for oxy-acetylene welding for structural work in mild steels
IS 2751 (pdf)
IS 2751 (txt) 1979 Code of Practice for Welding of Mild Steel Plain and Deformed Bars for Reinforced Concrete Construction
IS 2811 (pdf)
IS 2811 (txt) 1987 Recommendations for Manual Tungsten Inert-gas Arc Welding of Austenitic Stainless Steel
IS 2812 (pdf) 1993 Recommendations for manual tungsten inert gas arc welding of aluminium and aluminium alloys
IS 3023 (pdf)
IS 3023 (txt) 1965 Recommended practice for building up by metal spraying
IS 3525 (pdf)
IS 3525 (txt) 1998 Metal arc welding for hull constructions of merchant ships in carbon and carbon -manganese steels
IS 4353 (pdf)
IS 4353 (txt) 1995 Submerged Arc Welding of Mild Steel and Low Alloy Steels – Recommendations
IS 5139 (pdf)
IS 5139 (txt) 1995 Repair of cast iron castings by oxy-acetlene and manual metal arc welding – Recommendations
IS 5530 (pdf)
IS 5530 (txt) 2005 Recommendations for production rectification and repair of steel castings by metal arc welding process
IS 6409 (pdf)
IS 6409 (txt) 1971 Code of practice for oxy-acetylene flame cleaning
IS 6916 (pdf)
IS 6916 (txt) 1973 Code of practice for fabrication welding of steel castings
IS 8002 (pdf)
IS 8002 (txt) 1976 Recommended procedure for welding of flexible PVC
IS 8004 (pdf)
IS 8004 (txt) 1976 Recommended procedure for welding of rigid PVC
IS 8455 (pdf)
IS 8455 (txt) 1977 Recommended procedure for welding of polythlene
IS 8987 (pdf)
IS 8987 (txt) 1978 Recommended practice for air carbon arc gauging and cutting
IS 9006 (pdf)
IS 9006 (txt) 1978 Recommended practice for welding of clad steels
IS 9524 (pdf) 1980 Recommended procedure for repair welding of steel components by aluminothermic process
IS 9595 (pdf)
IS 9595 (txt) 1996 Metal arc welding of carbon and carbon manganese steels – Recommendations
IS 10178 (pdf)
IS 10178 (txt) 1995 CO2 gas shielded metal arc welding of structural steels – Recommendations
IS 10186 (pdf)
IS 10186 (txt) 1982 Recommendations for manual tungsten inert gas arc welding of copper and copper alloys
IS 10234 (pdf)
IS 10234 (txt) 1982 Recommendation for General Pipeline Welding
IS 10801 (pdf)
IS 10801 (txt) 1984 Recommended procedure for heat treatment of welded fabrications
IS 11991 (pdf)
IS 11991 (txt) 1986 Recommended practice for flash butt welding of tubes, rods and other sections in carbon and alloy steel
IS 14289 (pdf)
IS 14289 (txt) 1995 Manual tungsten inert gas arc welding of nickel and nickel alloys – Recommendations
IS 14419 (pdf)
IS 14419 (txt) 1996 Acceptance standards for radiographic examination of welds for ships – Recommendations
IS 15326-1 (pdf)
IS 15326-1 (txt) 2003 Quality Requirements for Welding – Fusion Wedling of Metalic Materials, Part 1: Guidlines for Selection and Use ISO 3834-1
IS 15326-2 (pdf)
IS 15326-2 (txt) 2003 Quality Requirements for Welding – Fusion Welding of Metallic Materials, Part 2: Comprehensive Quality Requirements ISO 3834-2
IS 15326-3 (pdf)
IS 15326-3 (txt) 2003 Quality Requirements for Welding – Fusion Wedling of Metalic Materials, Part 3: Standards Quality Requirements ISO 3834-3
IS 15326-4 (pdf)
IS 15326-4 (txt) 2003 Quality Requirements for Welding – Fusion Welding of Metallic Materials, Part 4: Elementary Quality Rquirements ISO 3834-4
IS 15327 (pdf)
IS 15327 (txt) 2003 Welding Coordination – Tasks and Responsibilities ISO 14731
IS 15728 (pdf)
IS 15728 (txt) 2006 Welding – Friction welding of metallic materials ISO 15620
IS 16002-1 (pdf)
IS 16002-1 (txt) 2012 Welding – Test for Shop Primers in Relation to Welding and Allied Processes, Part 1: General Requirements ISO 17652-1:2003
IS 16002-2 (pdf)
IS 16002-2 (txt) 2012 Welding – Test for Shop Primers in Relation to Welding and Allied Processes, Part 2: Welding Properties of Shop Primers ISO 17652-2:2003
IS 16002-3 (pdf)
IS 16002-3 (txt) 2012 Welding – Test for Shop Primers in Relation to Welding and Allied Processes, Part 3: Thermal Cutting ISO 17652-3:2003
IS 16002-4 (pdf)
IS 16002-4 (txt) 2012 Welding – Test for Shop Primers in Relation to Welding and Allied Processes, Part 4: Emission of Fumes and Gases ISO 17652-4:2003
ISIHB MMAW (pdf)
ISIHB MMAW (txt) 1965 ISI Handbook of Manual Metal-arc Welding for Welders
SP 12 (pdf) 1975 Handbook for Gas Welders
IS 1335 (pdf)
IS 1335 (txt) 1979 Methods for direct determination of alumina in refractory materials
IS 1405 (pdf)
IS 1405 (txt) 2010 IRON ORES – SAMPLING AND SAMPLE PREPARATION – MANUAL METHOD
IS 1449 (pdf)
IS 1449 (txt) 2010 Methods of Sampling of Managanese Ores
IS 1472 (pdf) 1977 Methods of sampling ferro alloys for determination of chemical composition
IS 1473 (pdf)
IS 1473 (txt) 2004 Methods of Chemical Analysis of Manganese Ores
IS 1493-1 (pdf)
IS 1493-1 (txt) 1981 Methods of chemical analysis of iron ores, Part 1: Determination of common constituents ISO
IS 1493-3 (pdf)
IS 1493-3 (txt) 1987 Methods of chemical analysis of iron ores, Part 3: Determination of titanium, chromium, vanadium, calcium and magnesium by atomic absorption spectrophotometry
IS 1493-4 (pdf) 1988 Methods of chemical analysis of iron ores, Part 4: Determination of aluminium by atomic absorption spectrophotomety
IS 1493-5 (pdf)
IS 1493-5 (txt) 1990 Methods of Chemical Analysis of Iron ores, Part 5: Determination of Copper Content-flame Atomic Absorption Spectrometric Method ISO 4693
IS 1493-6 (pdf)
IS 1493-6 (txt) 1990 Methods of chemical analysis of iron ores, Part 6: Determination of sodium and/or potassium contents-Flame atomic abssorption spectrometric method ISO 6831
IS 1493-7 (pdf)
IS 1493-7 (txt) 1993 Methods of chemical analysis of iron ores, Part 7: Determination of lead and or zinc content – Flame atomic absorption spectrometric method ISO 8753
IS 1493-8 (pdf)
IS 1493-8 (txt) 1993 Methods of chemical analysis of iron ores, Part 8: Determination of arsenic content – Molybdenum blue spectrophotometric method ISO 7834
IS 1493 (pdf)
IS 1493 (txt) 1959 Methods of Chemical Analysis of Iron Ores
IS 1527 (pdf)
IS 1527 (txt) 1972 Methods for chemical analysis of high silica refractory materials
IS 1760-1 (pdf) 1991 Methods of chemical analysis of limestone, dolomite and allied materials, Part 1: Determination of loss on ignition
IS 1760-2 (pdf) 1991 Methods of chemical analysis of limestone, dolomite and allied materials, Part 2: Determination of silica
IS 1760-3 (pdf)
IS 1760-3 (txt) 1992 Methods of chemical analysis of limestone, dolomite and allied materials, Part 3: Determination of iron oxide, alumina, calcium oxide and magnesia
IS 1760-4 (pdf) 1991 Methods of chemical analysis of limestone, dolomite and allied materials, Part 4: Determination of carbon dioxide
IS 1760-5 (pdf)
IS 1760-5 (txt) 1991 Methods of chemical analysis of limestone, dolomite and allied materials, Part 5: Determination of chlorides
IS 1760-6 (pdf) 2001 Chemical Analysis of Limestone, Dolomite and Allied Materials, Part 6: Determination of Free Silica
IS 1817 (pdf)
IS 1817 (txt) 1961 Methods of sampling non-ferrous metals for chemical analysis
IS 1917-1 (pdf) 1991 Chemical analysis of quartzite and high silica sand, Part 1: Determination of loss on ignition
IS 1917-2 (pdf) 1991 Chemical Analysis of Quartzite and High Silica Sand, Part 2: Determination of Sodium and Potassium By Flame Photometry
IS 1917-3 (pdf)
IS 1917-3 (txt) 1992 Chemical analysis of quartzite and high silica sand, Part 3: Determination of silica
IS 1917-4 (pdf)
IS 1917-4 (txt) 1991 Chemical analysis of quartzite and high silica sand, Part 4: Determination of aluminium by AAS method
IS 1917-5 (pdf)
IS 1917-5 (txt) 1992 Chemical analysis of quartzite and high silica sand, Part 5: determination of iron by AAS method
IS 1917-6 (pdf)
IS 1917-6 (txt) 1992 Chemical analysis of quartzite and high silica sand, Part 6: Determination of calcium and magnesium by atomic absorption spectrometric method
IS 1917-7 (pdf)
IS 1917-7 (txt) 2001 Chemical Analysis of Quartzite and High Silica Sand, Part 7: Determination of Titania by Spectrophotometric Method
IS 1999 (pdf)
IS 1999 (txt) 1987 Methods of sampling bauxite
IS 2000-1 (pdf) 1985 Methods of chemical analysis of bauxite, Part 1: Determination of loss on ignition
IS 2000-2 (pdf)
IS 2000-2 (txt) 1985 Methods of chemical analysis of bauxite, Part 2: Determination of silica
IS 2000-3 (pdf) 1985 Methods of chemical analysis of bauxite, Part 3: Determination of alumina
IS 2000-4 (pdf)
IS 2000-4 (txt) 1985 Methods of chemical analysis of bauxite, Part 4: Determination of ferric oxide
IS 2000-5 (pdf) 1985 Methods of chemical analysis of bauxite, Part 5: Determination of titania
IS 2000-6 (pdf) 1985 Methods of chemical analysis of bauxite, Part 6: Determination of vanadium
IS 2000-7 (pdf)
IS 2000-7 (txt) 2001 Chemical Analysis of Bauxite, Part 7: Determination of Phosphorus Pentoxide
IS 2000-8 (pdf)
IS 2000-8 (txt) 1989 Methods of chemical analysis of bauxite, Part 8: Determination of manganese by atomic absorption spectrophotometric method
IS 2000-9 (pdf)
IS 2000-9 (txt) 1989 Chemical Analysis of Bauxite, Part 9: Determination of Magnesium and Calcium by Atomic Absorption Spectrophotometric Method
IS 2109 (pdf)
IS 2109 (txt) 1982 Methods of sampling of dolomite, limestone and other allied materias
IS 2245 (pdf) 1962 Methods of sampling quartizite
IS 2246 (pdf) 1963 Methods of sampling of fluorspar (flourite)
IS 2411 (pdf)
IS 2411 (txt) 1963 Methods of chemical analysis of fluorspar (fluorite)
IS 3191 (pdf)
IS 3191 (txt) 1968 Methods of sampling of cryolite and aluminium trifluoride
IS 3200 (pdf)
IS 3200 (txt) 2001 Chemical Analysis of Cryolite
IS 3704 (pdf)
IS 3704 (txt) 1966 Methods for sampling of light metals and their alloy products
IS 4104 (pdf)
IS 4104 (txt) 1967 Method of chemical analysis of rutile
IS 4129 (pdf) 1967 Methods of chemical analysis of aluminium trifluoride
IS 4156 (pdf) 1967 Methods for sampling of barytes
IS 4166 (pdf)
IS 4166 (txt) 1967 Methods of sampling of ilmenite and rutile
IS 4574 (pdf) 1989 Flourspar for use in metallurgical industries
IS 4711 (pdf)
IS 4711 (txt) 2008 Methods for sampling of steel pipes, tubes and fittings
IS 4763 (pdf) 2006 Manganese ore for production of ferro manganese
IS 5442 (pdf)
IS 5442 (txt) 1992 Classification of haematite iron ore
IS 5534 (pdf) 1969 Method for determination of specific surface area of powder ore samples
IS 5842 (pdf)
IS 5842 (txt) 1986 Method for Measuring Bulk Density of Iron Oxides: Lump Ores, Sinter and Pellets
IS 5893 (pdf) 1989 Cryolite for use in aluminium industry for the aluminium industry
IS 5953 (pdf) 1985 bauxite for use in the production of alumina
IS 6495 (pdf)
IS 6495 (txt) 1984 Method of Tumbler Test for Iron Oxides: Lump Ores, Sinter and Pellets
IS 6744-1 (pdf)
IS 6744-1 (txt) 1972 Methods of Chemical Analysis of Ilmenite, Part I
IS 6907 (pdf)
IS 6907 (txt) 1992 Method of sampling steel castings
IS 7659-1 (pdf)
IS 7659-1 (txt) 1975 Reagents and standard solutions for use in chemical analysis of metals, ores and minerals, Part 1: volumetric solution
IS 8167 (pdf) 1989 Method for determination of reducibility index of iron ore oxides, lumps oore, sinter and pillets
IS 8562 (pdf)
IS 8562 (txt) 1977 Methods of sampling chrome ore
IS 8604 (pdf) 1977 Determination of compression strength of iron ore pellets after reduction
IS 8624 (pdf)
IS 8624 (txt) 1995 Method for determination of swelling index of iron ore pellets
IS 8625 (pdf) 1986 Determination of crushing strength of iron ore pellets
IS 9100 (pdf)
IS 9100 (txt) 1979 Methods of sampling steel forgings
IS 9101 (pdf) 1979 Methods of sampling iron ore pellets
IS 9386 (pdf)
IS 9386 (txt) 1979 Methods for chemical analysis of rock phosphate
IS 9592 (pdf) 1989 Aluminium trifluoride for use in aluminium industry
IS 9660 (pdf)
IS 9660 (txt) 2001 Methods for determination of softening – Melting characteristics of iron ore pellets – Lumps – Sinters
IS 9959 (pdf) 1981 Guidelines for iron ore sinters for iron making in blast furnace
IS 9963 (pdf) 1981 Determination of shatter index of iron ore lumps, sinter and pellets
IS 10085 (pdf)
IS 10085 (txt) 2003 Chemical Analysis of Zircon Flour or Sand
IS 10206 (pdf)
IS 10206 (txt) 1982 Methods of sampling steel wires
IS 10207 (pdf)
IS 10207 (txt) 1982 Methods of sampling grey iron and malleable iron castings
IS 10214 (pdf)
IS 10214 (txt) 1982 Methods of sampling bentonite
IS 10345 (pdf) 2004 Flux Grade Limestone for Use in Iron and Steel Making
IS 10346 (pdf)
IS 10346 (txt) 2004 Flux grade dolomite for use in steel plants
IS 10816 (pdf)
IS 10816 (txt) 1984 Methods of sampling zinc and lead concentrates
IS 10817 (pdf) 1984 Bauxite for refractory industry
IS 10818 (pdf) 1984 Chromite for metallurgical industry
IS 10819 (pdf) 1999 Chromite for Refractory Industry
IS 10823 (pdf)
IS 10823 (txt) 1994 Methods for Determination of Thermal Degradation Index (TDI) and Reduction Degradation Index (RDI) of Iron Oxides; Lump Ores, Sinter and Pellets
IS 11211 (pdf)
IS 11211 (txt) 1984 Methods of sampling rock phosphate
IS 11281 (pdf) 2005 Manganese ore for the production of iron and steel making
IS 11282 (pdf)
IS 11282 (txt) 2000 Guidelines for Laboratory Pot-grate Sintering Tests for Iron Ore Fines
IS 11283 (pdf)
IS 11283 (txt) 1985 Determination of softening point of iron oxides (in powder form):lump ore,sinterand pellets
IS 11292 (pdf)
IS 11292 (txt) 1985 Determination of relative reducibility of iron oxides:lump ore,sinter and pellets
IS 11321 (pdf)
IS 11321 (txt) 1985 Graphite for graphite crucibles
IS 11336 (pdf)
IS 11336 (txt) 1985 Guidelines for heat hardened iron ore pellets for iron making in blast furnaces
IS 11348 (pdf)
IS 11348 (txt) 1989 Iron ore pellets – Apparent specific gravity, true specific gravity and porosity – Method for determination apparent
IS 11373 (pdf)
IS 11373 (txt) 1985 Guidelines for laboratory disc pelletisation test for iron ore pellets
IS 11606 (pdf)
IS 11606 (txt) 1986 Methods of sampling cast iron pipes, fittings
IS 11607 (pdf)
IS 11607 (txt) 1986 Methods of sampling iron ore sinters
IS 11690 (pdf)
IS 11690 (txt) 1986 Methods of moisture determination of iron ore lot
IS 11894 (pdf)
IS 11894 (txt) 1986 Classification of magnetite iron ores,
IS 11895 (pdf) 2006 Classification of manganese ore, ferruginous manganese ore, silicious manganese ore, Dioxide manganese ore and manganiferrous iron
IS 11896 (pdf)
IS 11896 (txt) 1986 Determination of apparent specific gravity, true specific gravity and apparent porosity of iron ore lump and sinter
IS 11897 (pdf)
IS 11897 (txt) 1986 Guidelines for methods to be adopted for minerelogical identification of iron oxides: lump ore, sinter and pellets
IS 12107-1 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 1: Determination of loss on ignition
IS 12107-2 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 2: Determination of silica
IS 12107-3 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 3: Determination of aluminium
IS 12107-4 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 4: Determination of phosphorus
IS 12107-5 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 5: Determination of titanium
IS 12107-6 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 6: Determination of iron
IS 12107-7 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 7: Determination of manganese
IS 12107-8 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 8: Determination of calcium and magnesium
IS 12107-9 (pdf) 1987 Methods of chemical analysis of alumino-silicate refractory materials, Part 9: Determination of sodium and potassium by flame photometry
IS 12107-10 (pdf)
IS 12107-10 (txt) 2001 Methods of Chemical Analysis of Alumino-silicate Refractory Materials, Part 10: Determination of Iron Manganese, Calcium and Magnesium by Atomic Absorption Spectrometric Method
IS 12394 (pdf) 1988 Method for Weathering test on iron ore sinter
IS 12550 (pdf) 1988 Methods of determining particle size distribution of iron ore fines
IS 12595 (pdf)
IS 12595 (txt) 1989 Classification of Terminology for Exploration of Mineral Deposits
IS 12596 (pdf) 1989 Manganese Ore Sinters for Blending for Ferromanganese Production
IS 12667-1 (pdf) 1989 Methods of chemical analysis of chromite sand, Part 1: Determination of silica
IS 12667-2 (pdf) 1989 Methods of chemical analysis of chromite sand, Part 2: Determination of iron
IS 12667-3 (pdf)
IS 12667-3 (txt) 1989 Methods of chemical analysis of chromite sand, Part 3: Determination of chromium
IS 12667-4 (pdf) 1989 Methods of chemical analysis of chromite sand, Part 4: Determination of calcium
IS 12871 (pdf)
IS 12871 (txt) 2011 Copper, Lead, and Nickel Concentrates – Sampling Procedures for Determination of Metal and Moisture Content ISO 12743:2006
IS 13054 (pdf) 1991 Quartzite/quartz for the production of ferroalloys
IS 13344 (pdf)
IS 13344 (txt) 1992 Method for checking the bias of sampling of ores
IS 13676 (pdf) 1993 Quartzite foor iron making in blast furnace
IS 13751 (pdf) 1993 Tungsten for hard metal industry
IS 14296 (pdf) 1995 Dolomite for refractory industry
IS 14301 (pdf) 1995 Kyanite for refractory industry
IS 14302 (pdf) 1995 Beach sand silimanite for refractory industry
IS 14303 (pdf) 1995 Magnesite for Refractory Industry
IS 14713 (pdf) 1999 Synthetic (Fused) Mullite and Alumina Grains for Refractory Industry
IS 14852 (pdf)
IS 14852 (txt) 2000 Flaky Graphite for Refractory Industry
IS 15944 (pdf)
IS 15944 (txt) 2011 Iron ores – Experimental methods for checking the bias of sampling ISO 3086:2006
IS 276 (pdf)
IS 276 (txt) 2000 Austenitic-Manganese Steel Castings
IS 1030 (pdf)
IS 1030 (txt) 1998 Carbon steel castings for general engineering purposes
IS 1280 (pdf) 1975 Foundry moulding boxes of steel construction
IS 1305 (pdf) 1984 Graphite for use in foundry coatings
IS 1513 (pdf) 1980 Wooden Pattern Equipment for Foundries
IS 1752 (pdf)
IS 1752 (txt) 1973 Coal dust for use in cast iron foundry
IS 1811 (pdf)
IS 1811 (txt) 1984 Methods of sampling foundry sands
IS 1918 (pdf)
IS 1918 (txt) 1966 Methods of physical tests for foundry sands
IS 1987 (pdf)
IS 1987 (txt) 2002 High Silica Sand for Use in Foundries
IS 2644 (pdf)
IS 2644 (txt) 1994 High tensile steel castings
IS 2707 (pdf)
IS 2707 (txt) 1996 Carbon Steel Castings for Surface Hardening
IS 2708 (pdf)
IS 2708 (txt) 1993 1.5 Percent manganese steel castings for general engineerig purposes
IS 2763 (pdf)
IS 2763 (txt) 1999 Glossary of Terms Relating to Foundry Technology
IS 2856 (pdf)
IS 2856 (txt) 1999 Carbon Steel Castings for Pressure Containing Parts Suitable for Fusion Welding
IS 2985 (pdf)
IS 2985 (txt) 1990 Steel Castings for Ship’s Structure
IS 2986 (pdf) 1990 Steel castings for marine engines and boilers
IS 3018 (pdf)
IS 3018 (txt) 1977 Standard Silica Sand for Raw Material Testing in Foundries
IS 3038 (pdf)
IS 3038 (txt) 2006 Martensitic Stainless Steel and Alloy Steel Castings for Pressure Containing Parts Suitable for High Temperature Service
IS 3339 (pdf)
IS 3339 (txt) 1975 Silica flour for use in foundries
IS 3343 (pdf)
IS 3343 (txt) 1965 Natural moulding sand for use in foundries
IS 3444 (pdf)
IS 3444 (txt) 1999 Corrosion Resistant High Alloy Steel And Nickel Base Castings for General Applications
IS 4269 (pdf)
IS 4269 (txt) 1981 Dextrin for use in foundries
IS 4475-1 (pdf)
IS 4475-1 (txt) 1986 Crane-suspended Ladles for Foundries, Part 1: Straight/Taper Sided Geared Ladles 0.25 to 10 Tonnes for Iron and Steel Foundries
IS 4475-2 (pdf)
IS 4475-2 (txt) 1986 Crane-Suspended Ladles for Foundries: Part 2Cylindrical geared ladles 0.25 to 3.0 tonnes for iron foundries
IS 4475-3 (pdf)
IS 4475-3 (txt) 1989 Crane-Suspended Ladles for Foundries, Part 3: Straight/taper sided ladles 0.25 to 3.0 tonnes capacities for S.G. Iron foundries
IS 4475-4 (pdf)
IS 4475-4 (txt) 1988 Crane-Suspended Ladles for Foundries, Part 4: Taper sided non geared ladles 15 to 50 tonnes capacities for iron and steel foundries
IS 4491 (pdf)
IS 4491 (txt) 1994 Steel castings for high magnetic permeability
IS 4522 (pdf) 1986 Heat resistant alloy steel and nickel base castings
IS 4604 (pdf)
IS 4604 (txt) 1975 Pattern plates for machine moulding boxes
IS 4606 (pdf) 1983 Steel shots for use in foundries
IS 4683 (pdf)
IS 4683 (txt) 1968 Chilled iron shot and grit for use in foundries
IS 4843 (pdf) 1968 Code for designation of ferrous castings
IS 4896 (pdf)
IS 4896 (txt) 1992 One percent chromium steel castings for resistance to abrasion
IS 4897 (pdf)
IS 4897 (txt) 1994 Deviations on untoleranced dimensions and mass of steel castings
IS 4898 (pdf)
IS 4898 (txt) 1989 Steel Castings for Case Carburizing
IS 4899 (pdf)
IS 4899 (txt) 2006 Ferritic and martensitic steel casting for use at low temperature
IS 4981 (pdf) 1984 Guide pins for foundry pattern plates
IS 4982 (pdf) 1984 Closing pins for foundry moulding boxes
IS 5032 (pdf)
IS 5032 (txt) 1983 Recommended sizes of cupola furnace for foundry
IS 5303 (pdf) 1974 Zircon flour for use in foundries
IS 5824 (pdf) 1970 Lancets for use in foundries
IS 5841 (pdf) 1970 Flutted core cleaners for use in foundries
IS 5850 (pdf) 1970 Star (triangular) cutters for use in foundries
IS 5873 (pdf)
IS 5873 (txt) 1970 Steel cut-wire shots for use in foundries
IS 5904 (pdf)
IS 5904 (txt) 1978 Steel chaplets for use in ferrous foundries
IS 5981 (pdf) 1986 Sleekers for use in foundries
IS 5988 (pdf) 1970 Spring dowel sleeves (light and heavy patterns) for use in foundries
IS 6013 (pdf) 1970 Trowels for use in foundries
IS 6079 (pdf)
IS 6079 (txt) 1989 Low alloy cast steel grinding media
IS 6366 (pdf) 1971 Sprue plugs for use in foundries
IS 6376 (pdf) 1986 Pattern lifting pins and hooks for use in foundries
IS 6377 (pdf) 1971 Mellets for use in foundries
IS 6378 (pdf) 1986 Pattern Lifting and Rapping Plates
IS 6401 (pdf) 1986 Dowel pins for use in foundries
IS 6443 (pdf) 1971 Lifters and cleaners for use in foundries
IS 6447 (pdf)
IS 6447 (txt) 1986 Vent wires for use in foundries
IS 6482 (pdf) 1971 Tempers and rammers for use in foundries
IS 6601 (pdf) 1987 Permissible deviations in chemical composition for products analysis of steel
IS 6773 (pdf)
IS 6773 (txt) 2008 Sodium silicate for use in foundries
IS 6788 (pdf)
IS 6788 (txt) 1973 Chromite sand for use in foundries
IS 7295 (pdf) 1974 Chamotte
IS 7297 (pdf)
IS 7297 (txt) 1974 Olivine sand and flour for use in steel foundries
IS 7547 (pdf) 1987 Steel Nails used as internal chills in steel castings
IS 7806 (pdf)
IS 7806 (txt) 1993 Martensitic and austenitic high alloy steel castings for high temperature service
IS 7899 (pdf)
IS 7899 (txt) 2006 Alloy steel castings suitable for pressure services
IS 8228 (pdf)
IS 8228 (txt) 1976 Bauxite Sand
IS 8246 (pdf)
IS 8246 (txt) 1976 Liquid resins for use in shell process in foundries
IS 8250 (pdf) 1988 Foundry parting agents
IS 8779 (pdf)
IS 8779 (txt) 1978 Core gums (sodium silicate based) for use in foundries
IS 8785 (pdf)
IS 8785 (txt) 1978 Carbon dioxide core binder system (binder and breakdown agent) for use in foundries
IS 8800 (pdf)
IS 8800 (txt) 1997 Technical Delivery Conditions for Steel Castings (Excluding Investment Castings)
IS 8939 (pdf)
IS 8939 (txt) 1978 Code of practice for use of oxygen in Iron Steel,and non-ferrous metal foundries
IS 8988 (pdf)
IS 8988 (txt) 1978 Bauxite powder for foundry washes
IS 9007 (pdf) 1978 Zircon sand for use in foundries
IS 9008 (pdf)
IS 9008 (txt) 1978 Core repairing paste for use in foundries
IS 9009 (pdf) 1992 Foundry core oils
IS 9139 (pdf) 1979 Malleable iron shots and grits for use in foundries
IS 9541 (pdf)
IS 9541 (txt) 1987 Cast CTC Segments
IS 9565 (pdf)
IS 9565 (txt) 1995 Acceptance standards for ultrasonic inspection of steel castings
IS 9661 (pdf) 1980 Hand Shank Ladles
IS 9674 (pdf)
IS 9674 (txt) 1980 Test Methods for fluid self hardening sand
IS 10032 (pdf)
IS 10032 (txt) 1981 Organic no bake binders for use in foundries
IS 10033 (pdf)
IS 10033 (txt) 1992 Zircon and Graphite based core and mould washes
IS 10034 (pdf) 1981 Basic requirement for equipment for determining moisture content in foundry sand
IS 10091 (pdf) 1981 Iron oxide powder for use in foundries
IS 10094 (pdf) 1998 Code of practice for pattern making by using expanded polystyrene material
IS 10343 (pdf)
IS 10343 (txt) 1999 Carbon and Low Alloy Steel Investment Castings for General Applications
IS 10469 (pdf) 1983 Antipiping compound for foundry
IS 10487 (pdf)
IS 10487 (txt) 1983 Sand rammer
IS 10498 (pdf)
IS 10498 (txt) 1983 Apparatus for determining permeability of foundry sand
IS 10504 (pdf)
IS 10504 (txt) 1983 Exothermic feeding aid for foundry
IS 10518 (pdf)
IS 10518 (txt) 1983 Snap flask moulding boxes and jackets
IS 10724 (pdf)
IS 10724 (txt) 1990 ACCEPTANCE STANDARDS FOR MAGNETIC PARTICLE INSPECTION OF STEELCASTINGS-
IS 10774 (pdf)
IS 10774 (txt) 1993 corrosion resistant high alloy and nickel base investment castings for general applications
IS 10979 (pdf) 1984 Powder resins for use in shell process in foundries
IS 11099 (pdf) 1984 Universal sand testing machines
IS 11166 (pdf)
IS 11166 (txt) 1993 Permissible deviations on dimensions, surface roughness and mass of steel castings made with investment casting process
IS 11266 (pdf)
IS 11266 (txt) 1985 Flake resins for use in shell process in foundries
IS 11286 (pdf)
IS 11286 (txt) 1995 Corrosion resistant high alloy steel nickel base and cobalt base investment castings for severe applications
IS 11709 (pdf)
IS 11709 (txt) 2007 Technical delivery conditions for investment castings of steel
IS 11732 (pdf)
IS 11732 (txt) 1995 Acceptance standards for dye penetrant inspection of steel castings
IS 11758 (pdf)
IS 11758 (txt) 1994 Precipitation hardening stainless steel castings
IS 12006 (pdf)
IS 12006 (txt) 1987 Metal pattern and epoxy resin pattern equipment for foundries
IS 12117 (pdf)
IS 12117 (txt) 1996 Norms for classification of steel foundries for quality assurance
IS 12272 (pdf)
IS 12272 (txt) 1987 Divided blast cupola furnace
IS 12424 (pdf)
IS 12424 (txt) 1988 Hot box resin for use in foundries
IS 12446 (pdf)
IS 12446 (txt) 2007 Bentonite for use in foundries
IS 12799 (pdf)
IS 12799 (txt) 1989 Recommended practice for impregnation of castings
IS 12880 (pdf)
IS 12880 (txt) 1989 Guidelines for Controlling Foundry Rejection
IS 12938 (pdf) 1990 Acceptance standards for radiographic inspection of steel castings
IS 12968 (pdf) 1991 Steel castings for crankshafts for marine engines
IS 13100 (pdf) 1991 Pitch powder for use in cast iron foundry
IS 13126 (pdf) 1991 Silicon carbide chills
IS 13505 (pdf)
IS 13505 (txt) 1992 Centrifugally cast high alloy steel and nickel base tubing for pressure application at high temperature
IS 15865 (pdf)
IS 15865 (txt) 2009 Exothermic and Insulating Sleeves for Use in Foundries
IS 6 (pdf)
IS 6 (txt) 1983 Moderate Heat Duty Fireclay Refractories, Group ‘A’
IS 8 (pdf) 1994 High Heat Duty Fireclay Refractories
IS 195 (pdf) 2005 Fireclay Mortar for Laying Fireclay Refractory Bricks
IS 483 (pdf) 1972 Fireclay Refractories for Oil-fired Boiler Furnaces of Naval Ships
IS 484 (pdf)
IS 484 (txt) 1980 Silica Refractories for General Purposes
IS 1292 (pdf) 1991 Silica mortar for laying silica bricks in furnaces
IS 1522 (pdf) 1998 Fireclay Blocks for Glass Tank Furnace –
IS 1523 (pdf)
IS 1523 (txt) 1972 Bottom pouring refractories for steel plants
IS 1524 (pdf) 1968 Refractory Sleeves
IS 1525 (pdf)
IS 1525 (txt) 1968 Ladle refractories for steel plants
IS 1526 (pdf) 1960 Sizes and Shapes for Firebricks (230 mm Series)
IS 1528-1 (pdf)
IS 1528-1 (txt) 2010 METHODS OF SAMPLING AND PHYSICAL TESTS FOR REFRACTORY MATERIALS, Part 1: DETERMINATION OF PYROMETRIC CONE EQUIVALENT (PCE) OR SOFTENING POINT
IS 1528-2 (pdf)
IS 1528-2 (txt) 2011 Methods of Sampling and Physical Tests for Refractory Materials, Part 2: Determination of Refractoriness Under Load
IS 1528-3 (pdf)
IS 1528-3 (txt) 2010 Methods of Sampling and Physical Tests for Refractory Materials, Part 3: Determination of Spalling resistance
IS 1528-4 (pdf)
IS 1528-4 (txt) 2012 Methods of Sampling and Physical Tests for Refractory Materials, Part IV: Determination of Cold Crushing Strength of Dense Shaped Refratories Products
IS 1528-5 (pdf)
IS 1528-5 (txt) 2007 Methods of Sampling and Physical Tests for Refractory Materials, Part 5: Method for Determination of Modulus of Rupture at Ambient Temperature of dense and insulating shaped refractory products ISO 5014
IS 1528-6 (pdf)
IS 1528-6 (txt) 2010 METHODS OF SAMPLING AND PHYSICAL TESTS FOR REFRACTORY MATERIALS, Part 6: DETERMINATION OF PERMANENT LINEAR CHANGE AFTER REHEATING FOR SHAPED INSULATING AND DENSE REFRACTORIES
IS 1528-7 (pdf)
IS 1528-7 (txt) 2010 METHODS OF SAMPLING AND PHYSICAL TESTS FOR REFRACTORY MATERIALS, Part 7: METHODS OF SAMPLING AND CRITERIA FOR CONFORMITY
IS 1528-9 (pdf)
IS 1528-9 (txt) 2007 Methods of Sampling and Physical Tests for Refractory Materials, Part 9: Determination of True Density ISO 5018
IS 1528-10 (pdf)
IS 1528-10 (txt) 1974 Methods of Sampling and Physical Tests for Refractory Materials, Part X: Determination of Size of Refractory Bricks
IS 1528-11 (pdf) 1993 Methods of Sampling and Physical Tests for Refractory Materials, Part 11: Determination of Warpage
IS 1528-12 (pdf)
IS 1528-12 (txt) 2007 Methods of Sampling and Physical Tests for Refractory Materials, Part 12: Method for Determination of Bulk Density and true porosity of shaped insulating refractory products ISO 5016
IS 1528-13 (pdf)
IS 1528-13 (txt) 2007 Methods of Sampling and Physical Tests for Refractory Materials, Part 13: Determination of Resistance to Carbon monoxide ISO 12676
IS 1528-14 (pdf)
IS 1528-14 (txt) 1974 Methods of Sampling and Physical Tests for Refractory Materials, Part XIV: Determination of Sieve Analysis
IS 1528-15 (pdf)
IS 1528-15 (txt) 2007 Methods of Sampling and Physical Tests for Refractory Materials, Part 15: Method for determination of bulk density, apparent porosity and true porosity of dense shaped refractory products ISO 5017
IS 1528-16 (pdf)
IS 1528-16 (txt) 2007 Methods of Sampling and Physical Tests for Refractory Materials, Part 16: Determination of Thermal Conductivity According to Hot-Wire Method (Paralled) ISO 889402
IS 1528-17 (pdf)
IS 1528-17 (txt) 2012 Methods of Sampling and Physical Tests for Refractory Materials, Part 17: Shaped Insulating Refractory Products – Determination of Cold Crushing Strength ISO 8895:2004
IS 1528-18 (pdf)
IS 1528-18 (txt) 1993 Methods of Sampling and Physical Tests for Refractory Materials, Part 18: Determination of Creep in Compression ISO 3187
IS 1528-19 (pdf)
IS 1528-19 (txt) 1991 Methods of Sampling and Physical Tests for Refractory Materials, Part 19: Determination of thermal expansion
IS 1528-20 (pdf) 1993 Methods of Sampling and Physical Tests for Refractory Materials, Part 20: Determination of Modulus of Rupture at Elevated Temperature ISO 5013
IS 1528-21 (pdf)
IS 1528-21 (txt) 2007 Methods of sampling and physical tests for refractory materials, Part 21: Determination of thermal conductivity according to hot-wire method (cross-array) ISO 8894-1
IS 1528-22 (pdf)
IS 1528-22 (txt) 2007 Methods of Sampling and Physical Tests for Refractory Materials, Part 22: Methods for Determination of Permeability to Gases of Dense Shaped Refractoy Products
IS 1528-23 (pdf)
IS 1528-23 (txt) 2011 Methods of Sampling and Physical Tests for Refractory Materials, Part 23: Methods of Test for Dense Shaped Refractory Products – Determination of Resistance to Abrasion at Ambient Temperature
IS 1529 (pdf) 1971 Blast furnace refractories for steel plants
IS 1748 (pdf) 1981 Sizes of graphite crucibles
IS 1749 (pdf) 2005 Burnt magnesite refractories
IS 1750 (pdf) 1995 Dead burnt pea magnesite
IS 1751 (pdf)
IS 1751 (txt) 1984 Fireclay cupola refrectories
IS 2042 (pdf) 2006 Insulating bricks
IS 2043 (pdf) 1984 Siliceous fireclay refractories
IS 2044 (pdf) 2005 Mullite Refractories for Glass Melting Tank Furnaces
IS 3304 (pdf) 2005 Burnt magnesite-chrome refractories for general purposes
IS 3305 (pdf) 2005 Burnt chrome-magnesite refractories for general purposes
IS 4041 (pdf)
IS 4041 (txt) 2006 Terminoloty for refractories ISO 836
IS 4564 (pdf)
IS 4564 (txt) 1968 Fireclay nozzles
IS 4565 (pdf)
IS 4565 (txt) 1968 Fireclay stoppers
IS 4801 (pdf)
IS 4801 (txt) 1980 Chemically-Bonded Magnesite-Chrome Refractories for Roof Lining
IS 4812 (pdf)
IS 4812 (txt) 1996 Silica refractories for coke oven
IS 4813 (pdf) 1980 Chemically-bonded chrome-magnesite refractories for general purposes
IS 4814 (pdf) 1980 Chemically-Bonded Magnesite-Chrome Refractories for General Purposes
IS 5495 (pdf) 1969 Sizes and shapes for firebricks (300 mm and higher sizes)
IS 6727 (pdf)
IS 6727 (txt) 1972 Fireclay checker bricks for open hearth furnace
IS 6728 (pdf)
IS 6728 (txt) 1972 Recuperator tubes, tiles and collars for soaking pits in steel plants
IS 7199 (pdf) 2008 Blast Furnace Stove Refractories
IS 8953 (pdf) 2006 62 percent alumina bricks and blocks for blast furnace
IS 8966 (pdf)
IS 8966 (txt) 1978 Megnesite nozzles
IS 8977 (pdf)
IS 8977 (txt) 1978 Clay bonded graphite crucibles
IS 9010 (pdf)
IS 9010 (txt) 1978 Super heat duty fireclay refractories
IS 9929 (pdf)
IS 9929 (txt) 1981 Method of determining life of graphite crucibles
IS 9930 (pdf) 2005 Zircon refractories for glass furnace applications
IS 10047 (pdf)
IS 10047 (txt) 1981 Methods for testing refractory ramming masses
IS 10551 (pdf) 2005 Zircon mullite refractories for glass furnace applications
IS 10570 (pdf)
IS 10570 (txt) 2011 METHODS OF TESTING REFRACTORY CASTABLES
IS 10607 (pdf)
IS 10607 (txt) 1983 Refractories for cement rotary kilns
IS 11036 (pdf)
IS 11036 (txt) 1984 Graphite stopper heads
IS 11452 (pdf)
IS 11452 (txt) 1985 Method of testing air-setting refractory mortars
IS 12847 (pdf) 1997 Carbon Bonded Silicon Carbide Crucibles
IS 12893 (pdf) 2006 Pyrometric Reference Cones for laboratory use ISO 1146
IS 12951 (pdf) 2006 Mica Insulation Bricks for High Temperature Application
IS 13150 (pdf) 1991 Silica mortars for laying silica bricks in cooke ovens
IS 13173 (pdf)
IS 13173 (txt) 1991 Code of practice for handling and usage of graphite and silicon carbide crucibles
IS 13185 (pdf) 1991 Method of test for determination of drying shrinkage of refractory mortars
IS 14313 (pdf) 1995 70 percent alumina bricks
IS 14406 (pdf)
IS 14406 (txt) 1996 Refractories for forge and heat treatment furnaces _ Recommendations
IS 14447 (pdf)
IS 14447 (txt) 1997 Refractories for use in foundry industry – Recommendations
IS 15507 (pdf) 2004 Basic insulating coating material for application tundish used in steel plants
IS 15508 (pdf) 2004 Refractory Mass (Basic Gunning) for Steel Plant Application
IS 15541 (pdf)
IS 15541 (txt) 2005 Low cement and ultra low cement castables for general purposes
IS 15895 (pdf)
IS 15895 (txt) 2011 High Alumina Refractory Cement
IS 16051-1 (pdf)
IS 16051-1 (txt) 2013 Refractory Products – Measurement of Dimensions and External Defects of Refractory Bricks, Part 1: Dimensions and Conformity to Drawings
IS 16051-2 (pdf)
IS 16051-2 (txt) 2013 Refractory Products – Measurement of Dimensions and External Defects of Refractory Bricks, Part 2: Corner and Edge Defects and Other Surface Imperfections
IS 16052-1 (pdf)
IS 16052-1 (txt) 2013 Refractory Mortars, Part 1: Determination of Consistency Using the Penetrating Cone Method
IS 16052-2 (pdf)
IS 16052-2 (txt) 2013 Refractory Mortars, Part 2: Determination of Consistency Using the Reciprocating Flow Table Method
IS 16052-3 (pdf)
IS 16052-3 (txt) 2013 Refractory Mortars, Part 3: Determination of Joint Stability
IS 16052-4 (pdf)
IS 16052-4 (txt) 2013 Refractory Mortars, Part 4: Determination of Flexural Bonding Strength
IS 16052-5 (pdf)
IS 16052-5 (txt) 2013 Refractory Mortars, Part 5: Determination of Grain Size Distribution (Sieve Analysis)
IS 16052-6 (pdf) 2013 Refractory Mortars, Part 6: Determination of Moisture Content of REady-Mixed Mortars
SP 37-3 (pdf) 1987 Handbook for Refractories, Part 3: Refractories for Cement Kiln System
IS 228-5 (pdf)
IS 228-5 (txt) 1987 Methods of chemical analysis of steels, Part 5: Determination of nickel by dimethyl glyoxime (gravimetric) method (for nickel greater than or equal to 0.1 percent
IS 228-6 (pdf)
IS 228-6 (txt) 1987 Methods for Chemical Analysis of Steels, Part 6: Determination of Chromium by Persulphate Oxidation Method (for Chromium>0.1 Percent)
IS 228-7 (pdf)
IS 228-7 (txt) 1990 Methods of chemical analysis of steels, Part 7: Determination of molybdenum by alpha-benzoinoxime method (for molybdenum 1 percent and not containing tungsten)
IS 228-10 (pdf) 1989 Methods of chemical analysis of steels, Part 10: Determination of molybdenum by thiocynate (photometric) method in low and high alloy steels (for molybdenum 0.01 to 1.5 percent)
IS 228-11 (pdf)
IS 228-11 (txt) 1990 Methods of chemical analysis of steels, Part 11: Determination of total silicon by reduced molyddosilicate spectro photo metric method in carbon steels and low alloy steels (for silicon 0.01 to 0.05 percent)
IS 228-12 (pdf)
IS 228-12 (txt) 2001 Methods of chemical analysis of steels, Part 12: Determination of manganese by periodate spectrophotometric method in low and high alloy steels (for manganese 0.01 to 5.0 percent)
IS 228-13 (pdf)
IS 228-13 (txt) 1982 Methods for Chemical Analysis of Steels, Part XIII: Determination of Arsenic
IS 228-15 (pdf)
IS 228-15 (txt) 1992 Methods of chemical analysis of steels, Part 15: Determination of copper by thiosulphate iodide method (for copper 0.05 to 5 percent)
IS 228-16 (pdf)
IS 228-16 (txt) 1992 Methods of chemical analysis of steels, Part 16: Determination of tungsten by spectrophotometric method (for tungsten 0.1 to 2 percent)
IS 228-18 (pdf)
IS 228-18 (txt) 1998 Methods of chemical analysis of steels, Part 18: Determination of oxygen by instrumental method
IS 963 (pdf) 1958 Chrome molybdenum steel bars and rods for aircraft purposes
IS 1570-1 (pdf)
IS 1570-1 (txt) 1978 Schedules for wrought steels, Part 1: Steels specified by tensile and/or yield properties
IS 1570-2-1 (pdf)
IS 1570-2-1 (txt) 1979 Schedules for Wrought Steels, Part 2: Carbon Steels (Unalloyed Steels), Section 1: Wrought Products (Other Than Wires) With Specified Chemical Composition and Related Properties
IS 1570-2-2 (pdf)
IS 1570-2-2 (txt) 1987 Schedules for Wrought Steels, Part 2: Carbon Steels (Unalloyed Steels), Section 2: Carbon Steel Wires with Related Properties
IS 1570-2 (pdf) 1979 Schedules for Wrought Steels, Part 2: Carbon Steels (Unalloyed Steels)
IS 1570-3 (pdf)
IS 1570-3 (txt) 1979 Schedules for wrought steels, Part 3: Carbon and carbon manganese free cutting steels
IS 1570-4 (pdf)
IS 1570-4 (txt) 1988 Schedules for wrought steels, Part 4: Alloy steels (Alloy constructional and spring steels) with specified chemical composition andd mechanical properties
IS 1570-5 (pdf)
IS 1570-5 (txt) 1985 Schedules for Wrought Steels, Part 5: Stainless and Heat-resisting Steels
IS 1570-6 (pdf)
IS 1570-6 (txt) 1996 Schedules for Wrought Steels, Part 6: Carbon and Alloy Tool Steels
IS 1570-7 (pdf)
IS 1570-7 (txt) 1992 Schedule for wrought steels, Part 7: Steels for elevated temperature service (creep resistant steels)
IS 1870 (pdf)
IS 1870 (txt) 1965 Comparison of Indian and overseas standards for wrought steels for general engineering purposes
IS 1871-1 (pdf)
IS 1871-1 (txt) 1987 Commentary on Indian Standard Schedules for Wrought Steels, Part 1: Steels Specified by Tensile and/or Yield Properties
IS 1871-2 (pdf)
IS 1871-2 (txt) 1987 Commentary on Indin Standard Schedules for wrought steels, Part 2: Carbon steels (unalloyed steels) (Complementary to IS 1570 Part 2):1979)
IS 1871-3 (pdf)
IS 1871-3 (txt) 1987 Commentary on Indian Standard Schedules for Wrought Steels, Part 3: Carbon and Carbon Manganese Free Cutting Steels
IS 1875 (pdf)
IS 1875 (txt) 1992 Carbon steel billets, blooms, slabs and bars for forgings
IS 1956-6 (pdf) 1976 Glossary of Terms Relating to Iron and Steel, Part 6: Forging (including drop forging)
IS 2004 (pdf)
IS 2004 (txt) 1991 Carbon steel forgings for general engineering purposes
IS 2611 (pdf)
IS 2611 (txt) 1964 Carbon chromium molybdenum steel forgings for high temperature services
IS 3261 (pdf)
IS 3261 (txt) 1980 Carbon steel forgings for shipbuilding industry
IS 3445 (pdf)
IS 3445 (txt) 1992 Forged steel rolls
IS 3469-1 to 3 (pdf)
IS 3469-1 to 3 (txt) 1974 Tolerances for Closed Die Steel Forgings
IS 3479 (pdf)
IS 3479 (txt) 1966 General requirements for steel drop, upset and press forgings
IS 3739 (pdf)
IS 3739 (txt) 1987 Dimensional tolerances for carbon and alloy constructional steel products
IS 3748 (pdf) 1990 Tool and Die Steels
IS 3930 (pdf)
IS 3930 (txt) 1994 Flame and induction hardening steels
IS 4367 (pdf) 1991 Alloy steel forgings for general industrial use
IS 4368 (pdf) 1967 Alloy steel billets, blooms and slabs for forging for general engineering purposes
IS 4397 (pdf)
IS 4397 (txt) 1999 Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/Retainers
IS 4398 (pdf) 1994 Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races
IS 4430 (pdf) 1979 Mould Steels
IS 4431 (pdf) 1978 Carbon and carbon manganese free cutting steels
IS 4432 (pdf)
IS 4432 (txt) 1988 Case hardening steels
IS 4882 (pdf)
IS 4882 (txt) 1979 Low Carbon Steel Wire for Rivets for Use in Bearing Industry
IS 5489 (pdf)
IS 5489 (txt) 1975 Carburizing steels for use in bearing industry
IS 5517 (pdf) 1993 Steels for Hardening and Tempering
IS 5518 (pdf)
IS 5518 (txt) 1996 Steels for die blocks for drop forging
IS 5522 (pdf)
IS 5522 (txt) 1992 Stainless steel sheets and strips for utensils
IS 5651 (pdf)
IS 5651 (txt) 1987 Steels for Pneumatic Tools
IS 6527 (pdf) 1995 Stainless steel wire rod
IS 6528 (pdf)
IS 6528 (txt) 1995 Stainless steel wire
IS 6529 (pdf) 1996 Stainless steel blooms, billets and slabs for forging
IS 6603 (pdf)
IS 6603 (txt) 2001 Stainless Steel Bars and Flats
IS 6911 (pdf)
IS 6911 (txt) 1992 Stainless steel plate, sheet and strip
IS 7291 (pdf)
IS 7291 (txt) 1981 High speed tool steels
IS 7494 (pdf)
IS 7494 (txt) 1981 Steel for valves for internal combustion engines
IS 8748 (pdf) 1978 Forged/rolled CTC segments
IS 8811 (pdf)
IS 8811 (txt) 1998 Method for Emission Spectrometric Analysis of Plain Carbon and Low Alloy Steels Point to Plane Technique
IS 9175-1 (pdf)
IS 9175-1 (txt) 1979 Rationalized Steels for the Automobile and Ancillary Industry, Part 1: Chemical Composition
IS 9175-2 (pdf) 1985 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties, Part 2: 15c8 Grade Steel
IS 9175-3 (pdf) 1985 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 3 25C8 Grade Steel
IS 9175-4 (pdf) 1985 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 4 30C8 Grade Steel
IS 9175-5 (pdf) 1985 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 5 35C8 Grade Steel
IS 9175-6 (pdf)
IS 9175-6 (txt) 1986 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 6 40C8 Grade Steel
IS 9175-7 (pdf)
IS 9175-7 (txt) 1986 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 7 45C8 Grade steel
IS 9175-8 (pdf) 1985 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties, Part 8: 55C8 Grade Steel
IS 9175-9 (pdf) 1985 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 9 11C10S25 Grade steel
IS 9175-10 (pdf) 1985 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 10 14C14S14 Grade steel
IS 9175-11 (pdf) 1985 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 11 25C12S14 Grade steel
IS 9175-12 (pdf) 1988 Rationalized steels for the automobile and Ancillary Industry, Part 12: Mechanical and Physical Properties of 35 Mn6Mo3S15
IS 9175-13 (pdf)
IS 9175-13 (txt) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 13 40C15S12 Grade steel
IS 9175-15 (pdf)
IS 9175-15 (txt) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 15 37C15 Grade steel
IS 9175-16 (pdf)
IS 9175-16 (txt) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 16 35Mn6Mo3 Grade steel
IS 9175-17 (pdf)
IS 9175-17 (txt) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 17 35Mn6Mo4 Grade steel
IS 9175-18 (pdf) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 18 15Cr3 Grade steel
IS 9175-19 (pdf) 1986 Rationalized Steels for the Automobile and Ancillary Industry, Part 19: Mechanical and Physical Properties of 16Mn5Cr4 Grade Steel
IS 9175-20 (pdf)
IS 9175-20 (txt) 1986 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 20 20MnCr5 Grade steel
IS 9175-21 (pdf) 1987 Rationalized Steels for the Automobile and Ancillary Industry, Part 21: Mechanical and Physical Properties of 40Cr4 Grade Steel
IS 9175-22 (pdf)
IS 9175-22 (txt) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 22 40Cr4Mo3 Grade steel
IS 9175-23 (pdf) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 23 25Cr13Mo6 Grade steel
IS 9175-24 (pdf)
IS 9175-24 (txt) 1987 Rationalized Steels for the Automobile and Ancillary Industry, Part 24: Mechanical and Physical Properties of 35Ni5Cr2 Grade Steel
IS 9175-25 (pdf)
IS 9175-25 (txt) 1987 Rationalized Steels for the Automobile and Ancillary Industry, Part 25: Mechanical and Physical Properties of 15Ni5Cr4mo1 Grade Steel
IS 9175-26 (pdf) 1986 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 26 16Ni3Cr2 Grade steel
IS 9175-27 (pdf)
IS 9175-27 (txt) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 27 15Ni7Cr4MO2 Grade steel
IS 9175-28 (pdf) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 28 40Ni6Cr4Mo3 Grade steel
IS 9175-29 (pdf)
IS 9175-29 (txt) 1987 Rationalized Steels for the Automobile and Ancillary Industry, Part 29: Mechanical and Physical Properties of 40Ni10Cr3Mo6 Grade Steel
IS 9175-30 (pdf)
IS 9175-30 (txt) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 30 20Ni7CrMo2 Grade steel
IS 9175-31 (pdf) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 31 20Ni7Mo2 Grade steel
IS 9175-32 (pdf) 1987 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 32 20NiCrMo2 Grade steel
IS 9175-33 (pdf) 1988 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 33 42Cr6V10 Grade steel
IS 9175-34 (pdf) 1986 Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties – Part 34 14CrNi6 Grade steel
IS 9294 (pdf) 1979 Cold-Rolled Stainless Steel Strips for Razor Blades
IS 9516 (pdf)
IS 9516 (txt) 1980 Heat resisting steel
IS 9683 (pdf)
IS 9683 (txt) 1980 Carbon and low alloy steel forgings for fired and unfired pressure vessels
IS 9684 (pdf)
IS 9684 (txt) 1980 Technical conditions for the supply of hot rolled billets blooms, slabs and bars for closed die forgings
IS 9879 (pdf)
IS 9879 (txt) 1998 Method for Emission Spectrometric Analysis of Austentic and Ferritic Stainless Steels Point to Plane Technique
IS 10604-1 (pdf)
IS 10604-1 (txt) 1983 Machining allowances and tolerances for open die steel forgings, Part 1: carbon and low alloy steel forgings
IS 10604-2 (pdf)
IS 10604-2 (txt) 1983 Machining allowances and tolerances for open die steel forgings, Part 2: High alloy steel forgings
IS 10631 (pdf)
IS 10631 (txt) 1983 Stainless steel for welding electrode core wire
IS 10632-1 (pdf)
IS 10632-1 (txt) 1983 Non Magnetic stainless steels for electrical applications, Part 1: General requirements
IS 10632-2 (pdf)
IS 10632-2 (txt) 1983 Non Magnetic stainless steels for electrical applications, Part 2: Specific requirements for binding wire
IS 10632-3 (pdf)
IS 10632-3 (txt) 1983 Non Magnetic stainless steels for electrical applications, Part 3: Specific requirements for sheets, strips and plates for electrical appliances
IS 11169-1 (pdf)
IS 11169-1 (txt) 1984 Steels for cold heading/cold extrusion application, Part 1: Wrought carbon and low alloy steels
IS 11169-2 (pdf)
IS 11169-2 (txt) 1989 Steels forcold heading/cold extrusion, Part 2: Stainless steel
IS 11185 (pdf) 1984 Technical supply conditions for hot rolled and forged steel bars for use in machine tool industry
IS 11946 (pdf)
IS 11946 (txt) 1987 Soft magnetic iron strips
IS 11947 (pdf)
IS 11947 (txt) 1987 Soft magnetic iron rods, bars, flats and sections
IS 11952 (pdf)
IS 11952 (txt) 1986 Steels for piston pins (Gudgeon pins)
IS 12045 (pdf)
IS 12045 (txt) 1987 Alloys used in electrical resistance metallic heating elements
IS 12145 (pdf)
IS 12145 (txt) 1987 Quenched and tempered alloy steel forgings for pressure vessels
IS 12146 (pdf)
IS 12146 (txt) 1987 Carbon manganese steel forgings for pressure vessels
IS 12390 (pdf) 1988 Iron nickel alloy 36 for ceramic sealing
IS 12391 (pdf)
IS 12391 (txt) 1988 Iron nickel controlled expansion sealing alloys
IS 12549 (pdf)
IS 12549 (txt) 1988 Iron nickel cobalt sealing alloys
IS 12658 (pdf)
IS 12658 (txt) 1989 Grinding Media Rolled/Forged Carbon and Carbon-Chromium Steels
IS 12836 (pdf) 1989 36-Nickel Iron Soft Magnetic Rods
IS 12881 (pdf) 1990 36-Nickel Iron Soft Magnetic Strips
IS 12882 (pdf) 1990 48-Nickel iron soft magnetic strip
IS 13352 (pdf)
IS 13352 (txt) 1992 Stock for forgings produced f rom continuously bast billets , blooms, slabs and bars
IS 13387 (pdf) 1992 Tool steel forgings for metal forming
IS 13795-1 (pdf)
IS 13795-1 (txt) 1993 Glossary of terms for special alloys, Part 1: Soft magnetic marterials
IS 14331 (pdf)
IS 14331 (txt) 1995 Steels for high temperature bolting applications
IS 14652 (pdf)
IS 14652 (txt) 1999 18 Percent Nickel Maraging Steel Bars and Rods
IS 14698 (pdf)
IS 14698 (txt) 1999 Carbon and Low Alloy Steel Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used in Defence Services
IS 1161 (pdf)
IS 1161 (txt) 1998 Steel Tubes for Structural Purposes
IS 1239-1 (pdf)
IS 1239-1 (txt) 2004 Steel Tubes, Tubulars and Other Wrought Steel Fittings, Part 1: Steel Tubes
IS 1239-1 (pdf)
IS 1239-1 (txt) 2004 Steel Tubes, Tubulars and Other Wrought Steel Fittings, Part 1: Steel Tubes (BI-LINGUAL)
IS 1239-2 (pdf)
IS 1239-2 (txt) 2011 Steel Tubes, Tubulars and Other Steel Fittings, Part 2: Steel Pipe Fittings
IS 1956-8 (pdf)
IS 1956-8 (txt) 1976 Glossary of Terms Relating to Iron and Steel, Part VIII: Steel Tubes and Pipes
IS 1978 (pdf)
IS 1978 (txt) 1982 Line pipe
IS 1979 (pdf)
IS 1979 (txt) 1985 High test line pipe
IS 2039-1 to 3 (pdf)
IS 2039-1 to 3 (txt) 1991 Steel Tubes for Bicycle and Cycle Rickshaws
IS 2416 (pdf) 1986 Boiler and supherheater tubes for marine and naval purposes
IS 3074 (pdf)
IS 3074 (txt) 2005 Steel Tubes for Automotive Purposes
IS 3589 (pdf) 2001 Steel Pipes for Water and Sewage (168.3 to 2 540 mm Outside Diameter)
IS 3601 (pdf)
IS 3601 (txt) 2006 Steel tubes for mechanical and general engineering purposes
IS 3601 (B) (pdf)
IS 3601 (B) (txt) 2006 Steel Tubes for Mechanical and General Engineering Purposes (Bi-lingual)
IS 4270 (pdf) 2001 Steel Tubes Used for Water Wells
IS 4712 (pdf) 1984 Forged steel,socket-welding fittings
IS 4923 (pdf)
IS 4923 (txt) 1997 Hollow steel sections for structural use – Specification
IS 5429 (pdf)
IS 5429 (txt) 1979 Dimensions for steel tubes for automotive purposes
IS 5433 (pdf) 1969 Oil well steel casing pipes and couplings
IS 5504 (pdf) 1997 Spiral Welded Pipes
IS 6286 (pdf) 1971 Seamless and welded steel pipes for sub-zero temperature service
IS 6392 (pdf)
IS 6392 (txt) 1971 Steel pipe flanges
IS 6630 (pdf)
IS 6630 (txt) 1985 Seamless ferritic alloy steel pipes for high temperature steam service
IS 6647 (pdf) 1972 Drill pipes for use in oil or natural gas wells
IS 6913 (pdf)
IS 6913 (txt) 1973 Stainless steel tubes for the food and beverage industry
IS 7138 (pdf) 1973 Steel tubes for furniture purposes
IS 7174 (pdf)
IS 7174 (txt) 1974 Carbon steel tubes for use on board ships for working pressure 0.7 to 1.7 N/mm2
IS 8036 (pdf)
IS 8036 (txt) 1976 Mild steel transformer cooling tubes
IS 8119 (pdf)
IS 8119 (txt) 1976 Copper brazed steel tubing
IS 9158 (pdf) 1979 Cold-drawn high pressure fluid power cylinder tubes
IS 9295 (pdf)
IS 9295 (txt) 1983 Steel tubes for idlers for belt conveyors
IS 10577 (pdf)
IS 10577 (txt) 1982 Lancing pipes
IS 11428-1 to 3 (pdf)
IS 11428-1 to 3 (txt) 1985 Wrought Carbon Steel Butt-Welding Pipe Fittings
IS 11714-1 to 5 (pdf)
IS 11714-1 to 5 (txt) 1986 Steel Tubes for Heat Exchangers
IS 11722 (pdf) 1986 Thin walled flexible quick coupling pipes
IS 12620 (pdf)
IS 12620 (txt) 1989 Seamless Steel Tubes for Manufacturing High Pressure Gas Cylinders
IS 12791 (pdf)
IS 12791 (txt) 1989 High carbon chromium (bearing) steel tubes for the manufacture of bearing races
IS 13197 (pdf)
IS 13197 (txt) 1991 Grooved couplings
IS 1182 (pdf)
IS 1182 (txt) 1983 Recommended practice for radiographic examination of fusion welded butt joints in steel plates
IS 2417 (pdf)
IS 2417 (txt) 2003 Glossary of Terms Used in Ultrasonic Non-Destructive Testing
IS 2478 (pdf)
IS 2478 (txt) 1991 Glossary of terms relating to industrial radiography
IS 2595 (pdf)
IS 2595 (txt) 2008 Industrial radiographic testing – Code of practice
IS 2953 (pdf)
IS 2953 (txt) 1985 Glossary of terms used for interpretation of welds and castings radiographs
IS 3415 (pdf)
IS 3415 (txt) 1998 Glossary of terms used in magnetic particle flaw detection
IS 3657 (pdf) 1978 Radiographic image quality indicators
IS 3658 (pdf)
IS 3658 (txt) 1999 Code of practice for liquid penetrant flaw detection
IS 3664 (pdf)
IS 3664 (txt) 1981 Code of practice for ultrasonic pulse echo testings by contact and immersion methods
IS 3703 (pdf)
IS 3703 (txt) 2004 Recommended practice for magnetic particle flaw detection
IS 4225 (pdf)
IS 4225 (txt) 2004 Recommended Practice for Straight Beam Ultrasonic Testing of Steel Plates
IS 4260 (pdf)
IS 4260 (txt) 2004 Recommended practice for ultrasonic testing of butt welds in ferritic steel
IS 4853 (pdf)
IS 4853 (txt) 1982 Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes
IS 4904 (pdf)
IS 4904 (txt) 2006 Calibration blocks for use in ultrasonic non-destructive testing
IS 5334 (pdf)
IS 5334 (txt) 2003 Magnetic Particle Flaw Detection of Welds – Code of Practice
IS 6394 (pdf)
IS 6394 (txt) 2006 Ultrasonic Testing of Seamless Metallic Tubular Products by Contact and Immersion Methods – Code of Practice
IS 6398 (pdf)
IS 6398 (txt) 1983 Code of practice for eddy current testing of ferrous seamless pipes and tubes
IS 6410 (pdf)
IS 6410 (txt) 1991 magentic flaw detection inks and powders
IS 6752 (pdf)
IS 6752 (txt) 1991 Code of practice for magnetic particle flaw detection of ferrous pipes and tubes
IS 7343 (pdf)
IS 7343 (txt) 1986 Code of practice for ultrasonic testing of ferrous welded pipes and tubular products
IS 7666 (pdf)
IS 7666 (txt) 1988 Ultrasonic Examination of Ferritic Castings of Carbon and Low Alloy Steel – Recommended Procedure
IS 7743 (pdf)
IS 7743 (txt) 2006 Recommended practice for magnetic particle testing and inspection of steel forgings
IS 7810 (pdf)
IS 7810 (txt) 1999 Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys
IS 8780 (pdf)
IS 8780 (txt) 2004 Non-Destructive Testing of Steel Castings – Code of Practice
IS 8791 (pdf)
IS 8791 (txt) 1978 Code of practice for ultrasonic flaw detection of ferritic steel forgings
IS 8973 (pdf)
IS 8973 (txt) 1991 Glossary of terms relating to leak detection techniques
IS 9902 (pdf)
IS 9902 (txt) 2004 Recommended practice for leak testing
IS 10543 (pdf)
IS 10543 (txt) 1983 Method for dry powder magnetic particle testing
IS 11612 (pdf)
IS 11612 (txt) 2004 Code of practice for eddy current testing of non-ferrous seamless pipes and tubes
IS 11626 (pdf)
IS 11626 (txt) 2005 Recommended practice for ultrasonic testing and acceptance for forging quality steel blooms
IS 11630 (pdf)
IS 11630 (txt) 2005 Method for Ultrasonic Testing of Steel Plates for Pressure Vessels and Special Applications
IS 11655 (pdf)
IS 11655 (txt) 1986 Procedure for stray flux testing of ferrous magnetic seamless steel tubular products
IS 12147 (pdf)
IS 12147 (txt) 1987 Recommended practice for wet magnetic particle examination
IS 12148 (pdf)
IS 12148 (txt) 1987 Guidelines for requirements for non-destructive testing agencies
IS 12666 (pdf)
IS 12666 (txt) 1988 Methods for performance assessment of ultrasonic flaw detection equipment
IS 12710 (pdf)
IS 12710 (txt) 1989 Glossary of terms used in accoustic emission testing
IS 12782 (pdf) 1989 Guidelines for Using Thermography for Monitoring of Industrial Components
IS 12860 (pdf)
IS 12860 (txt) 1989 Metallic Coating Thickness By X-ray Fluorescence Technique Method – Determination
IS 12889 (pdf)
IS 12889 (txt) 1989 Non-destructive Testing – Performance Evaluation of Liquid Penetrants
IS 12965 (pdf)
IS 12965 (txt) 1990 Glossary of Terms Used in Electromagnetic (Eddy Current) Testing
IS 13190 (pdf)
IS 13190 (txt) 1991 Recommended practice for eddy current examinationn by rotating probe method of round steel bars
IS 13805 (pdf)
IS 13805 (txt) 2004 General Standard for Qualification and Certification of Non-Destructive Testing Personnel
IS 14669 (pdf)
IS 14669 (txt) 1999 Thermal Neutron Radiography – Recommended Practices
IS 14670 (pdf)
IS 14670 (txt) 1999 Recommended Practice for Acoustic Emission Inspection During Hydrostatic Pressure Testing of System
IS 14800 (pdf)
IS 14800 (txt) 2000 Recommended Practice for Sorting of Ferrous/Non-ferrous Materials Using Electromagnetic (Eddy Current) Technique
IS 15404 (pdf)
IS 15404 (txt) 2003 Recommended Practice for Measuring Ultrasonic Velocity in Materials
IS 15435 (pdf)
IS 15435 (txt) 2003 Recommended Practice for Measuring Thickness Using Ultrasonic Method
IS 15452 (pdf)
IS 15452 (txt) 2004 Recommended Practice for Flaw Sizing by Ultrasonic DGS Method
IS 15468 (pdf)
IS 15468 (txt) 2004 Performance Evaluation of Ultrasonic Thickness Gauges
IS 15531 (pdf)
IS 15531 (txt) 2004 Recommended Practice for Ultrasonic Testing of Weld Fillets of Non-Linear Joints
IS 15539 (pdf)
IS 15539 (txt) 2004 Recommended practice for magnetic particle examination of steam turbine rotor blades
IS 15540 (pdf)
IS 15540 (txt) 2004 Recommendaed practice for eddy current testing of installed non-ferromagnetic heat exchanger tubing using dual frequency method
IS 15643 (pdf)
IS 15643 (txt) 2006 Non-destructive examination of polymer based composite materials – Code of practice
IS 15775 (pdf)
IS 15775 (txt) 2008 Glossary of terms for signal analysis related to non-destructive testing
IS/ISO 3057 (pdf)
IS/ISO 3057 (txt) 1998 Non-destructive Testing – Metallographic Replica Techniques of Surface Examination ISO 3057:1998
IS/ISO 5580 (pdf)
IS/ISO 5580 (txt) 1985 Non-Destructive Testing – Industrial Radiographic Illuminators – Minimum Requirements ISO 5580:1985
IS 1956-1 (pdf)
IS 1956-1 (txt) 1976 Glossary of terms relating to iron and steel, Part I: General metallurgy, heat treatment and testing
IS 4075 (pdf)
IS 4075 (txt) 1985 Method for macrostreak flaw test for steel
IS 4163 (pdf)
IS 4163 (txt) 2004 Steel – Determination of Content of Nonmetallic Inclusions – Micrographic Method Using Standard Diagrams ISO 4967
IS 4748 (pdf)
IS 4748 (txt) 2009 Steels – Micrographic Determination of The Apparent Grain Size
IS 6396 (pdf)
IS 6396 (txt) 2000 Methods of Measuring Decarburized Depth of Steel
IS 6416 (pdf)
IS 6416 (txt) 1988 Methods for Measuring Case Depth of Steel
IS 7739-1 (pdf)
IS 7739-1 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part I: General Features
IS 7739-2 (pdf)
IS 7739-2 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part 2: Electrolytic polishing
IS 7739-3 (pdf)
IS 7739-3 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part 3: Aluminium and its alloys and their examination
IS 7739-4 (pdf)
IS 7739-4 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part 4: Copper and its alloys and their examination
IS 7739-5 (pdf)
IS 7739-5 (txt) 1976 Code of Practice for Preparation of Metallographic Specimens, Part 5: Iron and steel and their examination
IS 7739-6 (pdf)
IS 7739-6 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part 6: Lead and its alloys and their examination
IS 7739-7 (pdf)
IS 7739-7 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part 7: Magnesium and its alloys and their examination
IS 7739-8 (pdf)
IS 7739-8 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part 8: Nickel and its alloys and their examination
IS 7739-9 (pdf)
IS 7739-9 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part 9: Gold, silver, platinum, palladium and their alloys
IS 7739-10 (pdf)
IS 7739-10 (txt) 1975 Code of Practice for Preparation of Metallographic Specimens, Part 10: Tin and its alloys and their examination
IS 7739-11 (pdf)
IS 7739-11 (txt) 1976 Code of Practice for Preparation of Metallographic Specimens, Part 11: Zinc and its alloys and their examination
IS 7754 (pdf)
IS 7754 (txt) 1975 Method for designation of microstructure of graphite in cast iron
IS 8795 (pdf) 1978 Method for determining case depth of carburized steel by fracture test
IS 8860 (pdf)
IS 8860 (txt) 1978 Code of practice for heat treatment of aluminium alloys
IS 9415 (pdf)
IS 9415 (txt) 1980 Method for determination of hardenability and grain size of tool steels by penetration fracture test
IS 10138-1 (pdf)
IS 10138-1 (txt) 1982 Macroscopic Methods For Determination Of Non-Metallic Inclusion Content In Wrought Steels, Part 1: Blue Fracture Test Method
IS 10138-2 (pdf) 1983 Macroscopic Methods For Determination Of Non-Metallic Inclusion Content In Wrought Steels, Part 2: Step Machined Test Method
IS 10138-3 (pdf)
IS 10138-3 (txt) 1983 Macroscopic Methods For Determination Of Non-Metallic Inclusion Content In Wrought Steels, Part 3: Magnetic Particle Inspection Method
IS 10138 (pdf)
IS 10138 (txt) 2010 Macroscopic Methods For Determination Of Non-Metallic Inclusion Content In Wrought Steels
IS 11371 (pdf)
IS 11371 (txt) 1985 Method for macroetch test for wrought steel products
IS 12037 (pdf)
IS 12037 (txt) 1987 Macrographic examination by sulphur print (Baumann method)
IS 12211 (pdf)
IS 12211 (txt) 1987 Micrographic method for assessing the distribution of carbides in tool steel and bearing steels using photomicrographs
IS 12366 (pdf)
IS 12366 (txt) 1988 Recommended Practice for Heat Treatment of Titanium and Titanium Alloys
IS 12378 (pdf)
IS 12378 (txt) 1988 Method for Macroetch Test for Titanium Alloys
IS 12573 (pdf)
IS 12573 (txt) 2010 Method for Macro Etch Test for Wrought Aluminium and Aluminium Alloy Products
IS 13015 (pdf)
IS 13015 (txt) 1991 Macroetch testing, inspection and rating of steel products
IS 13417 (pdf)
IS 13417 (txt) 1992 Code of practice for heat treatment of steels
IS 13484 (pdf)
IS 13484 (txt) 1992 Method for Macroetch Test for Copper and Copper Alloys
IS 13605 (pdf)
IS 13605 (txt) 1992 Method for macroetch test for zinc and zinc alloys
IS 13655 (pdf)
IS 13655 (txt) 1993 Guidelines for Heat Treatment of Cast Iron
IS 13691 (pdf)
IS 13691 (txt) 1993 Determination of total or effective thicknesses of thin surfaces hardened layers ISO 4970
IS 14598 (pdf)
IS 14598 (txt) 1998 Heat treatment of maraging steel – Code of practice
IS 15426 (pdf)
IS 15426 (txt) 2004 Steel – Metallographic Characterization of Duplex Grain Size and Distributions ISO 14250
IS 15839 (pdf)
IS 15839 (txt) 2009 Determination of Ferrite Content in Austenitic Stainless Steel Castings ISO 13520
IS 1067 (pdf)
IS 1067 (txt) 1981 Electroplated coatings of silver for decorative and protective purposes
IS 1340 (pdf)
IS 1340 (txt) 1977 Code of practice for chromate conversion coating on zinc and cadmium coated articles and zinc base alloys
IS 1771 (pdf)
IS 1771 (txt) 1986 Electroplated coatings of silver and silver alloys for general engineering purposes
IS 1868 (pdf)
IS 1868 (txt) 1996 Anodic Coatings on Aluminium and its Alloys
IS 1985-1 (pdf)
IS 1985-1 (txt) 1980 Recommended practice for preparation of iron and steel for electroplating, Part 1: high carbon steel
IS 1985-2 (pdf)
IS 1985-2 (txt) 1980 Recommended Practice for Preparation of Iron and Steel for Electroplating, Part II: Low Carbon Steel
IS 1985-3 (pdf)
IS 1985-3 (txt) 1980 Recommended practice for preparation of iron and steel for electroplating, Part 3: Iron castings
IS 1992 (pdf) 1979 Electroplated coatings of lead
IS 2450 (pdf)
IS 2450 (txt) 1963 Recommended practice for plating on aluminium and its alloys
IS 2601 (pdf) 1987 Brass anodes for electroplating
IS 2602 (pdf)
IS 2602 (txt) 1989 Cadmium anodes for electroplating
IS 2603 (pdf)
IS 2603 (txt) 1983 Copper anodes for electroplating
IS 2604 (pdf) 1988 Lead Anodes for Electroplating
IS 2605 (pdf)
IS 2605 (txt) 1985 Zinc anodes for electroplating
IS 2606 (pdf) 1987 Alloy lead anodes for chromium plating
IS 3531 (pdf)
IS 3531 (txt) 1997 Glossary of terms relating to corrosion of metals
IS 3554 (pdf)
IS 3554 (txt) 1966 Glossary of terms relating to electroplating
IS 3618 (pdf)
IS 3618 (txt) 1966 Phosphate Treatment of Iron and Steel for Protection Against Corrosion
IS 4180 (pdf) 1967 Code of practice for corrosion protection of light gauge steel sections used in building
IS 4252 (pdf)
IS 4252 (txt) 1982 Electroplated coatings of gold for decorative purposes
IS 4777 (pdf)
IS 4777 (txt) 1968 Specification for Performance tests for protection schemes used in protection of light gauge steel against corrosion
IS 4826 (pdf)
IS 4826 (txt) 1979 Hot-Dipped Galvanized Coatings on Round Steel Wires
IS 6005 (pdf)
IS 6005 (txt) 1998 Code of practice for phosphating of iron and steel
IS 6009 (pdf)
IS 6009 (txt) 1970 Method for evaluation of results of accelerated corrosion test
IS 6012 (pdf)
IS 6012 (txt) 1992 Method for measurement of coating thickness by eddy current
IS 6057 (pdf)
IS 6057 (txt) 1988 Hard anodic coatings on aluminium and aluminium alloys
IS 6158 (pdf) 1984 Recommended Practice for Safeguarding Against Embrittlement of Hot-dip Galvanized Iron and Steel Products
IS 6159 (pdf)
IS 6159 (txt) 1998 Recommended Practice for Design and Fabrication of Iron and Steel Products Prior to Galvanizing and Metal Spraying
IS 6586 (pdf)
IS 6586 (txt) 1989 Recommended practice for metal spraying for protection of iron steel
IS 6651 (pdf)
IS 6651 (txt) 1972 Anodized aluminium for automobile use
IS 6697 (pdf)
IS 6697 (txt) 1988 Hot-dip aluminium coatings on ferrous parts (other than sheet,strip and wire) for general purposes
IS 6745 (pdf)
IS 6745 (txt) 1972 Method for determination of mass of zinc coating on zinc coated iron and steel articles
IS 6910 (pdf)
IS 6910 (txt) 1985 Method of testing corrosion resistance of electroplated and anodized aluminium coatings by acetic acid salt spray (AAS) test
IS 7088 (pdf)
IS 7088 (txt) 1973 Recommended Practice for Anodizing Aluminium and its Alloys
IS 7808 (pdf)
IS 7808 (txt) 1975 Code of Procedure for Conducting Studies on Underground Corrosion of Metals
IS 8038 (pdf)
IS 8038 (txt) 1985 Method of testing corrosion resistance of metallic and other non organic coatings by corrodkote test
IS 8062-2 (pdf)
IS 8062-2 (txt) 2006 Code of Practice for Cathodic Protection of Steel Structures, Part II: Underground Pipelines
IS 8062-3 (pdf)
IS 8062-3 (txt) 1977 Code of practice for cathodic protection of steel structure,part 3 Ship’s hull
IS 8062-4 (pdf)
IS 8062-4 (txt) 1979 Code of practice for cathodic protection of steel structures ,part 4 Galvanic protection of dockgates, caissons, piers and jetties
IS 8221 (pdf)
IS 8221 (txt) 1976 Code of practice for corrosion prevention of metals and metal components in packages
IS 8375 (pdf) 1977 Method for checking continuity of anodized coatings
IS 8376 (pdf)
IS 8376 (txt) 1988 Electroplated Coatings of Nickel Plus Chromium on Plastics for Decorative Purposes
IS 8435 (pdf)
IS 8435 (txt) 1977 Methods for measurement of thickness of metallic coatings on plastics
IS 8436 (pdf) 1989 Thermal Cycling Test for Evaluation of Electroplated Plastics – Method
IS 8508 (pdf)
IS 8508 (txt) 1988 Code of practice for hot-dip aluminizing of iron and steel
IS 8554 (pdf) 1977 Method of checking insulation of anodized coating by measurement of break down potential
IS 8602 (pdf)
IS 8602 (txt) 1977 Method of tests for chromate coatings on zinc and cadimium surfaces
IS 8629-1 to 3 (pdf) 1977 Code of Practice for Protection of Iron and Steel Structures from Atmospheric Corrosion
IS 9077 (pdf)
IS 9077 (txt) 1979 Code of practice for corrosion protection of steel reinforcement in RB and RCC construction
IS 9172 (pdf)
IS 9172 (txt) 1979 Recommended design practice for corrosion prevention of steel structures
IS 9530 (pdf) 1980 Method of testing microhardness of electroplated coatings
IS 9531 (pdf)
IS 9531 (txt) 1989 Recommended practice for preparation of copper and copper-base alloys for electroplating
IS 9838 (pdf)
IS 9838 (txt) 1981 Method for determinattion of coating mass per unit area of conversion coatings on metallic materials by gravimetric method
IS 9839 (pdf)
IS 9839 (txt) 1981 Chromate conversion coatings on electroplated zinc and cadmium coatings
IS 9844 (pdf)
IS 9844 (txt) 1981 Methods of Testing Corrosion Resistance of Electroplated and Anodized Aluminium Coatings by Neutral Salt Spray Test
IS 10461-1 (pdf)
IS 10461-1 (txt) 1994 Resistance to Inter-Granular Corrosion of Austenitic Stainless Steels – Method for Determination, Part 1: Corrosion Test in Nitric Acid Medium by Measurement of Loss in Mass (Huey Test)
IS 10461-2 (pdf)
IS 10461-2 (txt) 1994 Resistance to Intergranular Corrosion of Austenitic Stainless Steels – Method for Determination, Part 2: Corrosion Test in a Sulphuric Acid/Copper Sulphate Medium in the Presence of Copper Turnings (Monypenny Strauss Test)
IS 10471 (pdf)
IS 10471 (txt) 1983 Recommended practice for corrosion prevention in electronic component and assemblies
IS 10493 (pdf)
IS 10493 (txt) 1983 Corrosion protection tests for temporary corrosion preventives
IS 11232 (pdf)
IS 11232 (txt) 1985 Chromate conversion coatings on aluminium
IS 11579 (pdf)
IS 11579 (txt) 1986 Recommended practice for chromate conversion coatings on aluminium
IS 11598-1 (pdf)
IS 11598-1 (txt) 1986 Code of practice for corrosion protection in fertilizer plants, Part 1: Phosphoric acid plant
IS 11759 (pdf)
IS 11759 (txt) 1986 Code of Practice for Repair of Damaged Hot-dip Galvanized Coatings
IS 11812 (pdf)
IS 11812 (txt) 1986 Recommended practice for safeguarding against warpage and distortion of hot-dipped galvanized articles
IS 11826 (pdf)
IS 11826 (txt) 1986 Recommended practice for chemical colouring for engineering components in general and for bicycle components
IS 11857 (pdf)
IS 11857 (txt) 1986 Anodized wrought aluminium for external ar chitectural applications
IS 11864 (pdf)
IS 11864 (txt) 1986 Recommended construction practice of apparatus for spray cabinet for various salt spray tests
IS 13515 (pdf)
IS 13515 (txt) 1992 Rust converter
IS 4840 (pdf)
IS 4840 (txt) 2006 Metal powders – Determination of flow time by means of a calibrated funnel (hall flowmeter) ISO 4490
IS 4841 (pdf) 1982 Method for determination of density of sintered metallic materials
IS 4842 (pdf) 1982 Method for transverse testing of hardmetals
IS 4848 (pdf)
IS 4848 (txt) 1981 Method for Determination of Apparent Density of Free Flowing Powders for Powder Metallurgical Purposes
IS 4857 (pdf)
IS 4857 (txt) 2005 Metallic powders,excluding powders for hardmetals – Determination of compactibility (compressibility) in uniaxial compression ISO 3927
IS 5432 (pdf)
IS 5432 (txt) 1982 Glossary of terms relating to powder metallurgy
IS 5461 (pdf)
IS 5461 (txt) 1984 Method for sieve analysis of metal powders
IS 5642 (pdf)
IS 5642 (txt) 1991 Permeable sintered metal materials – Determination of density,oil content,and open porosity ISO 2738
IS 5644-1 (pdf)
IS 5644-1 (txt) 1993 Metallic Powders – determination of Oxygen Content by Reduction Methods, Part 1: General guidelines ISO 4491-1
IS 5644-2 (pdf)
IS 5644-2 (txt) 2005 Metallic Powders – determination of Oxygen Content by Reduction Methods, Part 2: Loss of mass on hydrogen reduction (hydrogen loss) ISO 4491-2
IS 5644-3 (pdf)
IS 5644-3 (txt) 2005 Metallic Powders – determination of Oxygen Content by Reduction Methods, Part 3: Hydrogen – Reducible oxygen ISO 4491-3
IS 5644-4 (pdf)
IS 5644-4 (txt) 1993 Metallic Powders – determination of Oxygen Content by Reduction Methods, Part 4: Total oxygen by reduction extraction ISO 4491-4
IS 5652-1 (pdf) 1993 Hardmetals – Rockwell Hardness Test (Scale A), Part 1: Test Method
IS 6492 (pdf)
IS 6492 (txt) 1972 Methods for sampling of powders for powder metallurgical purposes
IS 7438 (pdf) 1985 Method for test for acid-insoluble content in iron, copper, tin, and bronze powders
IS 7505 (pdf) 1985 Cobalt powder for hardmetals
IS 7506 (pdf) 1987 Nickel Powder
IS 7512 (pdf)
IS 7512 (txt) 2006 Method for the determination of average particle size of metal powders by fisher sub-sieve sizer
IS 7970 (pdf) 1987 Tantalum Powder for Capacitors
IS 8367 (pdf) 1993 Tin powder
IS 8368 (pdf) 2010 Tungsten Carbide Powder for Hardmetals
IS 8369 (pdf) 2010 Titanium carbide powder for hardmetals
IS 8370 (pdf) 1977 Iron powder for powder metallurgical aplications
IS 8392 (pdf) 1985 Tungsten powder for hardmetals
IS 8485 (pdf) 1977 Copper powder for powder metallurgical applications
IS 8871 (pdf)
IS 8871 (txt) 2004 Metallic Powders – Determination of tap density ISO 3953
IS 8876 (pdf)
IS 8876 (txt) 1978 Method for the determination of residue on chlorination of tungsten metal powder
IS 10035 (pdf) 1993 Bronze powder for metallic filters
IS 10385 (pdf) 1982 Method for determination of radial crushing strength of sintered metal powder bearings
IS 11110 (pdf) 1984 Copper lead powder
IS 11111 (pdf) 1984 Leaded bronze powders
IS 11506 (pdf)
IS 11506 (txt) 2004 Lubricated metal-powder mixes – Determination of lubricant content – Modified Soxhlet extraction method ISO 13944
IS 11518 (pdf) 1985 Determination of (the magnetization) coercivity in hardmetals
IS 11520 (pdf) 1985 Method for metallographic sample preparation of hardmetals
IS 11627 (pdf) 1986 Method for determination of apparent density of metallic powders by Scott volumeter
IS 11959 (pdf) 1987 Method for metallographic determination of microstructure in hardmetals
IS 11960 (pdf) 1987 Methods for metallographic determination of apparent porosity and uncombined carbon in hardmetals
IS 12279 (pdf)
IS 12279 (txt) 2005 Method for determination of transverse rupture strengh of sintered metal materials (excluding hardmetals)
IS 12286 (pdf) 1988 Method for determination of abrasive wear resistance of hardmetals
IS 12473-1 (pdf) 1988 Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 1: General Requirements
IS 12473-2 (pdf) 1988 Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 2: Determination of Calcium, Potassium, Magnesium and Sodium in Contents from 0
IS 12473-3 (pdf)
IS 12473-3 (txt) 1988 Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 3: Determination of cobalt,iron ,manganese and nickel in contents from 0.01 to 0.5 percent (m/m)
IS 12473-4 (pdf) 1988 Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 4: Determination of Molybdenum, Titanium and Vanadium in Contents from 0.01 to
IS 12473-5 (pdf)
IS 12473-5 (txt) 1988 Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 percent (m/m)
IS 12473-6 (pdf) 1988 Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 6: Determination of chromium in contents from 0.01 to 2 percent (m/m)
IS 12483 (pdf) 1988 Determination of Titanium in Hardmetals by Spectrophotometric Method
IS 12513 (pdf) 1988 Determination of cobalt in hardmetals by potentiometric method
IS 12539 (pdf) 1988 Determination of total carbon in hardmetals by gravimetric method
IS 12548 (pdf) 1988 Determination of insoluble (free) carbon in hardmetals by gravimetric method
IS 12570 (pdf) 1988 Method for Determination of Dimensional Changes Associated with Compacting and Sintering of Metallic Powders (Excluding Powders for Hardmetals)
IS 12571 (pdf) 1988 Method for Determination of Green Strength by Transverse Rupture of Rectangular Compacts of Metallic Powder
IS 12783 (pdf)
IS 12783 (txt) 1989 Hardmetals – Vickers Hardness Test
IS 13780 (pdf)
IS 13780 (txt) 1993 Hardmetals – Compression Test ISO 4506
IS 13781 (pdf)
IS 13781 (txt) 1993 Permeable sintered metal materials – Determination of bupple test pore size ISO 4003
IS 13782 (pdf)
IS 13782 (txt) 1993 Permeable sintered metal materials – Determination of fluid permeability ISO 4022
IS 13803 (pdf) 1993 Sintered metal materials and hardmetals – Determination of young modulus ISO 3312
IS 15554 (pdf)
IS 15554 (txt) 2004 Sintered Metal Materials, Excluding Hardmetals – Tensile Test Pieces
IS 15567 (pdf)
IS 15567 (txt) 2005 Sintered metal materials, excluding hardmetals – gatigue test pieces ISO 3928
IS 15574 (pdf) 2005 Sintered Metal Materials, excluding Hard metals – Unnotched Impact Test Piece
IS 15585 (pdf)
IS 15585 (txt) 2005 Mintered Metal Materials 5755
IS 15703 (pdf)
IS 15703 (txt) 2006 Sintered metal materials, excluding hardmetals – determination of apparent hardness and microhardness ISO 4498
IS/ISO 4507 (pdf)
IS/ISO 4507 (txt) 2000 Sintered Ferrous Materials, Carburized or Carbonitrided – Determination and Verification of Case-Hardening Depth by A Micro-Hardness Test ISO 4507:2000
IS 8849 (pdf)
IS 8849 (txt) 1991 Glossary of terms relating to fuel fired industrial furnaces
IS 9180 (pdf)
IS 9180 (txt) 1991 Recommendations for Performance Rating of Fuel Fired Furnaces
IS 9444 (pdf)
IS 9444 (txt) 2007 Code of practice for installation of oil supply units for fuel fired furnaces
IS 9977 (pdf)
IS 9977 (txt) 1998 Design and construction of box type forging furnaces – Guidelines
IS 10298 (pdf)
IS 10298 (txt) 1982 Guidelines for design and construction of mould and core drying ovens for foundries
IS 11462 (pdf)
IS 11462 (txt) 1985 Mould and core sand dryers rotary type
IS 12368 (pdf)
IS 12368 (txt) 1988 Guidelines for Design and Construction of Hot Air Generators
IS 12392 (pdf)
IS 12392 (txt) 1988 Code of Practice for Design, Manufacture and Testing of Metallic Recuperators
IS 12553 (pdf)
IS 12553 (txt) 1988 Code of practice for design,construction,installation and operation of industrial gas/oil burning equipment
IS 12826-1 (pdf) 1989 Code of practice for ordering, testing and acceptance of industrial furnaces, Part 1: purchaser’s data sheet for ordering of industrial furnaces
IS 12826-2 (pdf)
IS 12826-2 (txt) 1990 Ordering, Testing and Acceptance of Industrial Furnaces – Code of Practice, Part 2: Supplier’s Data Sheet for the Supply of Industrial Furnaces
IS 12826-3 (pdf)
IS 12826-3 (txt) 1990 Code of practice for ordering, testing and acceptance of industrial furnaces, Part 3: Testing and aceptancce of industrial furnaces
IS 14245 (pdf)
IS 14245 (txt) 1995 Protective atmosphere for heat treatment furnaces – Recommendations
IS 14492 (pdf)
IS 14492 (txt) 1997 Drying preheating and commissioning of furnace installations, steam boilers, industrial kilns and chimneys – Recommendations
IS 15562 (pdf)
IS 15562 (txt) 2005 Design and construction of fuel fired bogie hearth type heat treatment furnaces – Guidelines
IS 504-1 to 12 (pdf)
IS 504-1 to 12 (txt) 2002 Chemical Analysis of Aluminium and its Alloys — Parts 1 to 12
IS 504-13 to 16 (pdf)
IS 504-13 to 16 (txt) 2003 Chemical Analysis of Aluminium and its Alloys, Part 13: To 16
IS 10852 (pdf)
IS 10852 (txt) 2012 Storage and Transportation of Sponge iron, Direct Reduced (DRI) and Hot Briquetted Iron (HBI) – Guidelines
IS 11092 (pdf)
IS 11092 (txt) 2001 Iron Ore Pellets for Direct Reduction Processes
IS 11093 (pdf)
IS 11093 (txt) 2001 Iron Ore Lumps for Direct Reduction Processes
IS 11284 (pdf) 1985 Rotary tube test for iron bearing materials for the manufacture of sponge iron/direct reduced iron(DRI )
IS 11285 (pdf)
IS 11285 (txt) 2002 Various Tests on Raw Materials to be Used for Coal Based Rotary Kiln Direct Reduction
IS 11795 (pdf) 1996 Guidelines for ash softening studies on solid reductants for direct reduction
IS 11860 (pdf) 1998 Guidelines for non -coking coals for solid reductant based direct reduction in rotary kilns(and other reactors
IS 12052 (pdf)
IS 12052 (txt) 2007 Method for determination of re-oxidation rate of sponge iron/direct reduced iron(DRI) in contact with humid air and in direct contact with water
IS 12263 (pdf) 1987 Method for determination of regidity of sponge iron/DRI during transportation and handling
IS 12381 (pdf)
IS 12381 (txt) 1994 Coal (Char) Reactivity for Direct Reduction Process – Method of Determination
IS 12668 (pdf)
IS 12668 (txt) 1989 Melting characterstics of sponge iron/direct reduced iron (DRI)
IS 12929 (pdf)
IS 12929 (txt) 2007 Feedstock (iron oxides and natural gas) for gas based direct reduction processes-guidelines
IS 13839 (pdf)
IS 13839 (txt) 1993 Sponge Iron/DRI Fines/briquettes for Steel Making
IS 13885 (pdf)
IS 13885 (txt) 2001 Non-Magnetics/Char in Sponge Iron (DRI) – Methods of Determination
IS 14719 (pdf) 1999 Density of Hot Briquetted Iron (HBI) – Method for Determination
IS 14795 (pdf)
IS 14795 (txt) 2000 Method for Determination of Clustering of Iron Oxide Feedstock for Direct Reduction Processes
IS 14796 (pdf) 2000 Guidelines on Feedstock for Smelting Reduction Processes
IS 14797 (pdf) 2000 Classification of Smelting Reduction (Alternate Iron Making) Processes
IS 14991 (pdf)
IS 14991 (txt) 2001 Method of Determination for Coal Char Strength
IS 15403 (pdf)
IS 15403 (txt) 2003 Method for Determination of Sulphur Present in Sponge Iron After Separation of Non-Magnetic Materials
IS 15774 (pdf)
IS 15774 (txt) 2007 Sponge Iron/Directed Reduced Iron (DRI) Hot Briquetted Iron (HBI) and Cold Briquetted Iron (CBI) for Steel Making
IS 5416 (pdf)
IS 5416 (txt) 2006 Direct Reduced Iron – Determination of Metallic Iron – Bromine-Methanol Titrimetric Method ISO 5416:2006
IS 10835 (pdf)
IS 10835 (txt) 2007 Direct Reduced Iron and Hot Briquetted Iron – Sampling and Sample Preparation ISO 10835:2007
IS 15968 (pdf)
IS 15968 (txt) 2000 Direct Reduced Iron Determination of Apparent Density and Water Absorption of Hot Briquetted Iron (HBI) ISO 15968:2000
IS 921 (pdf)
IS 921 (txt) 1965 Butcher’s Knives
IS 922 (pdf)
IS 922 (txt) 1965 Cook’s Knives
IS 923 (pdf)
IS 923 (txt) 1965 Carving Knives
IS 924 (pdf)
IS 924 (txt) 1965 Bread knives
IS 925 (pdf)
IS 925 (txt) 1966 Pocket Knives
IS 992 (pdf)
IS 992 (txt) 1964 Forks (Table, Fish, Pastry and Serving), Stainless Steel
IS 993 (pdf)
IS 993 (txt) 1964 Forks (table, fish, pastry and serving) brass and nickel silver
IS 995 (pdf)
IS 995 (txt) 1982 Table Knives, Dessert Knives and Fruit Knives
IS 1660-6 (pdf) 1980 Wrought Aluminium Utensils, Part VI: Compartmental Trays
IS 2347 (pdf)
IS 2347 (txt) 2006 Domestic Pressure Cookers
IS 3545 (pdf)
IS 3545 (txt) 1982 Meat Choppers
IS 3546 (pdf)
IS 3546 (txt) 1966 Vegetable Knives
IS 3721 (pdf) 1966 Cheese Cutting Knives for Table Use
IS 4109 (pdf) 1967 Kadahies
IS 4119 (pdf)
IS 4119 (txt) 2008 Press – Charcoal Burning
IS 4120 (pdf) 1967 Tubs and Baths
IS 4536-1 (pdf) 1987 Composite Bottom Stainless Steel Cooking Utensils, Part 1: Copper Electrodeposited
IS 4536-3 (pdf) 1987 Composite Bottom Stainless Steel Cooking Utensils, Part 3: Copper Clad
IS 6808 (pdf) 1972 Grinder, hand, domestic
IS 7185 (pdf) 1981 Boiler, Milk Aluminium
IS 7211 (pdf) 1973 Mincer, Hand Operated, Clamp Type
IS 9040 (pdf)
IS 9040 (txt) 1978 Methods for sampling of utensils
IS 13395 (pdf)
IS 13395 (txt) 1995 Performance of Handles and Handle Assemblies Attached to Cookware
IS 916 (pdf)
IS 916 (txt) 2000 Square Tins for Solid Products
IS 1394 (pdf)
IS 1394 (txt) 1984 Glossary of terms relating to metal containers
IS 1406 (pdf)
IS 1406 (txt) 1995 Rectangular Tins for Liquids –
IS 1407 (pdf)
IS 1407 (txt) 1980 Round paint tins
IS 1783-1 (pdf) 1993 Drums, Large, Fixed Ends, Part 1: Grade A Drums
IS 1783-2 (pdf) 1988 Drums, large, fixed ends, Part 2 Grade B drums
IS 1784 (pdf)
IS 1784 (txt) 1998 Screwed closures for drums
IS 1994 (pdf)
IS 1994 (txt) 1987 Crown Closures
IS 2034 (pdf) 2012 Round Open Top Sanitary Cans for Butter and Cheese – Specification
IS 2087 (pdf) 1988 Square tins for general purpose
IS 2123 (pdf)
IS 2123 (txt) 1977 Vial (goldie) seals
IS 2134 (pdf) 1981 Round tins for general purposes
IS 2471 (pdf)
IS 2471 (txt) 1963 Methods of test for metal containers
IS 2474 (pdf)
IS 2474 (txt) 1982 Metal closures for drums
IS 2552 (pdf) 1989 Steel drums (galvanized and ungalvanized)
IS 3101 (pdf)
IS 3101 (txt) 1995 Aluminium collapsible tubes
IS 3259 (pdf)
IS 3259 (txt) 1966 Methods of sampling of metal containers
IS 3286 (pdf)
IS 3286 (txt) 1980 Round grease tins
IS 3575 (pdf) 1993 Bitumen drums
IS 3603 (pdf) 1988 Seamless aluminium bottles
IS 3680 (pdf)
IS 3680 (txt) 1987 Round printing ink containers
IS 4638 (pdf)
IS 4638 (txt) 1981 Seamless rectangular fish tins
IS 5241 (pdf)
IS 5241 (txt) 1987 Shoe Polish Containers
IS 5682 (pdf)
IS 5682 (txt) 1991 Open top drums and kegs
IS 6941 (pdf)
IS 6941 (txt) 1973 Method for sampling metal closures
IS 7182 (pdf)
IS 7182 (txt) 1973 Methods of tests for aluminium collapsible tubes
IS 7852 (pdf)
IS 7852 (txt) 1975 Eye ointment tubes, small
IS 8393 (pdf)
IS 8393 (txt) 1977 Roll Seal Pilferproof Closures
IS 8449 (pdf)
IS 8449 (txt) 1999 Non-returnable metal aerosol dispensers
IS 8469 (pdf)
IS 8469 (txt) 1977 Methods of tests for flammability of aerosol products
IS 8932 (pdf)
IS 8932 (txt) 1978 Preformed metal screw caps for glass containers
IS 8933 (pdf) 1978 Mess tins
IS 8996 (pdf) 1988 20-litre Steel Jerricans
IS 9209 (pdf) 1979 Methods of test for the compatibility of aerosol products with the metal aeroso l dispensers
IS 9396-1 (pdf)
IS 9396-1 (txt) 1987 Round Open Top Sanitary Cans for Foods and Drinks, Part 1: Tinplate
IS 9396-2 (pdf)
IS 9396-2 (txt) 2012 Round open top sanitary cans for foods and drink- Specification, Part 2: Sizes and general requirements
IS 9445 (pdf)
IS 9445 (txt) 1980 Aluminium containers for packing of liquid pesticides (capacity 5 litres and above)
IS 9503 (pdf) 1988 Aluminium bottles for packing of liquid pesticides
IS 9634 (pdf)
IS 9634 (txt) 1980 Aerosol valves – 25.4 mm diameter
IS 9635 (pdf) 1980 Methods for sampling of aerosol valves
IS 9976 (pdf) 1981 Method of sampling of open top sanitary (OTS) cans
IS 9991 (pdf)
IS 9991 (txt) 1981 Condensed milk cans
IS 9992 (pdf) 1991 Round and rectangular tinplate cans for liquid pesticides
IS 10325 (pdf)
IS 10325 (txt) 2000 Square Tins – 15 kg/litre For Ghee, Vanaspati, Edible Oils and Bakery Shortenings
IS 10339 (pdf)
IS 10339 (txt) 2000 Ghee, Vanaspati, Edible Oil Tins Up to 10 kg/litre Capacity
IS 11078 (pdf)
IS 11078 (txt) 2012 Round Open Top Sanitary Cans for Milk Powder – Specification
IS 11079 (pdf)
IS 11079 (txt) 1984 Metal cans for pan masala and zarda
IS 11104 (pdf) 2012 Glossary of terms relating to open top sanitary cans
IS 12219 (pdf) 1987 Methods of Determination of Gross – Lidded Capacity of Open Top Sanitary Cans
IS 12340 (pdf) 1988 Round top aluminium Containers for Liquid Pesticides
IS 13997 (pdf) 1994 Drums large open top
IS 14407 (pdf)
IS 14407 (txt) 1996 Aluminium cans for bevereges
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com