SECTION-XV 664 CHAPTER-76
CHAPTER 76
Aluminium and articles thereof
NOTE :
In this Chapter, the following expressions have the meanings hereby assigned to
them:
(a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid crosssection
along their whole length in the shape of circles, ovals, rectangles (including squares),
equilateral triangles or regular convex polygons (including “flattened circles” and “modified
rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of
equal length and parallel). Products with a rectangular (including square), triangular or polygonal
cross-section may have corners rounded along their whole length. The thickness of such products,
which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of
the width. The expression also covers cast or sintered products, of the same forms and dimensions,
which have been subsequently worked after production (otherwise than by simple trimming or
de-scaling), provided that they have not thereby assumed the character of articles or products of
other headings.
(b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform crosssection
along their whole length, which do not conform to any of the definitions of bars, rods,
wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products,
of the same forms, which have been subsequently worked after production (otherwise than by
simple trimming or de-scaling), provided that they have not thereby assumed the character of
articles or products of other headings.
(c) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section
along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral
triangles or regular convex polygons (including “flattened circles” and modified rectangles”, of
which two opposite sides are convex arcs, the other two sides being straight, of equal length and
parallel). Products with a rectangular (including square), triangular or polygonal cross-section
may have corners rounded along their whole length. The thickness of such products which have
a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of the width.
(d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 7601), coiled or not,
of solid rectangular (other than square) cross-section with or without rounded corners (including
“modified rectangles” of which two opposite sides are convex arcs, the other two sides being
straight, of equal length and parallel) of a uniform thickness, which are:
(i) of rectangular (including square) shape with a thickness not exceeding one-tenth
of the width;
SECTION-XV 665 CHAPTER-76
(ii) of a shape other than rectangular or square, of any size, provided that they do not
assume the character of articles or products of other headings.
Headings 7606 and 7607 apply, inter alia, to plates, sheets, strip and foil with patterns (for
example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been
perforated, corrugated, polished or coated, provided that they do not thereby assume the character
of articles or products of other headings.
(e) Tubes and pipes
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed
void along their whole length in the shape of circles, ovals, rectangles (including squares),
equilateral triangles or regular convex polygonals, and which have a uniform wall thickness.
Products with a rectangular (including square), equilateral triangular or regular convex polygonal
cross-section, which may have corners rounded along their whole length, are also to be considered
as tubes and pipes provided the inner and outer cross-sections are concentric and have the same
form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated,
bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
SUB-HEADING NOTES :
- In this Chapter, the following expressions have the meanings hereby assigned to them:
(a) Aluminium, not alloyed
Metal containing by weight at least 99% of aluminium, provided that the content by weight
of any other element does not exceed the limit specified in the following Table:
TABLE – OTHER ELEMENTS
Element Limiting content % by weight
Fe + Si (iron plus silicon) 1
Other elements (1), each 0.1(2)
(1) Other elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn
(2) Copper is permitted in a proportion greater than 0.1% but not more than 0.2%, provided that
neither the chromium nor manganese content exceeds 0.05%
(b) Aluminium alloys
Metallic substances in which aluminium predominates by weight over each of the other
elements, provided that:
(i) the content by weight of at least one of the other elements or of iron plus silicon
taken together is greater than the limit specified in the foregoing table; or
(ii) the total content by weight of such other elements exceeds 1%. - Notwithstanding the provisions of Chapter Note 1(c), for the purposes of sub-heading 7616 91, the
term “wire” applies only to products, whether or not in coils, of any cross-sectional shape, of which no
cross-sectional dimension exceeds 6 mm.
SECTION-XV 666 CHAPTER-76
Tariff Item Description of goods Unit Rate of duty
Standard Preferential
Areas
(1) (2) (3) (4) (5)
7601 UNWROUGHT ALUMINIUM
7601 10 – Aluminium, not alloyed :
7601 10 10 — Ingots kg. 7.5% –
7601 10 20 — Billets kg. 7.5% –
7601 10 30 — Wire bars kg. 7.5% –
7601 10 40 — Wire rods kg. 7.5% –
7601 10 90 — Other kg. 7.5% –
7601 20 – Aluminium alloys :
7601 20 10 — Ingots kg. 7.5% –
7601 20 20 — Billets kg. 7.5% –
7601 20 30 — Wire bars kg. 7.5% –
7601 20 40 — Wire rods kg. 7.5% –
7601 20 90 — Other kg. 7.5% –
7602 ALUMINIUM WASTE AND SCRAP
7602 00 – Aluminium waste and scrap :
7602 00 10 — Aluminium scrap, namely the following : kg. 5% –
clean aluminium lithographic sheets covered by ISRI
code word ‘Tablet’;
new, clean aluminium lithographic sheets covered by
ISRI code word ‘Tabloid’;
mixed low copper aluminium clippings and solids
covered by ISRI code word ‘Taboo’;
clean mixed old alloy sheet aluminium covered by
ISRI code word ‘Taint’/‘Tabor’;
new aluminium can stock covered by ISRI code word
‘Take’;
old can stock covered by ISRI code word ‘Talc’;
shredded aluminium used beverages can (U) scrap
covered by ISRI code word ‘Talcred’;
densified aluminium used beverages can (UBC) scrap
covered by ISRI code word ‘Taldack’;
baled aluminium used beverage can (UBC) scrap
covered by ISRI code word ‘Taldon’;
briquetted aluminium used beverage can (UBC) scrap
covered by ISRI code word ‘Taldork’;
painted siding covered by ISRI code word ‘Tale’;
coated scrap covered by ISRI code word ‘Talent’;
aluminium scrap radiators covered by ISRI code word
‘Talk’;
SECTION-XV 667 CHAPTER-76
E.C. aluminium nodules covered by ISRI code word
‘Tall’;
new pure aluminium wire and cable covered by ISRI
code word ‘Talon’;
new mixed aluminium wire and cable covered by ISRI
code word ‘Tann’;
Old pure aluminium wire and cable covered by ISRI
code word ‘Taste’;
old mixed aluminium wire and cable covered by ISRI
code word ‘Tassel’;
aluminium pistons covered by ISRI code word ‘Tarry’;
segregated aluminium borings and turnings covered
by ISRI code word ‘Teens’;
mixed aluminium castings covered by ISRI code word
‘Telic’;
mixed aluminium castings covered by ISRI code word
‘Tense’;
wrecked airplane sheet aluminium covered by ISRI
code word ‘Tepid’;
new aluminium foil covered by ISRI code word
‘Terse’;
New aluminium foil covered by ISRI code word ‘Tetra’;
Old aluminium foil covered by ISRI code word ‘Tesla;
aluminium grindings covered by ISRI code word
‘Thigh’;
sweated aluminium covered by ISRI code word
‘Throb’;
segregated new aluminium alloy clippings and solids
covered by ISRI code word ‘Tooth’;
mixed new aluminium alloy clippings and solids
covered by ISRI code word ‘Tough’;
segregated new aluminium castings, forgings and
extrusions covered by ISRI code word ‘Tread’;
aluminium auto castings covered by ISRI code word
‘Trump’;
insulated aluminium wire scrap covered by ISRI code
word ‘Twang’;
aluminium airplane castings covered by ISRI code
word ‘Twist’;
fragmentizer aluminium scrap (from automobile
shredder) covered by ISRI code word ‘Twitch’;
Aluminium auto or truck wheels covered by ISRI code
word ‘Troma’ ;
Fragmentizer aluminium scrap from automobile
shredders covered by ISRI code word ‘Tweak’;
(1) (2) (3) (4) (5)
SECTION-XV 668 CHAPTER-76
Burnt Fragmentizer aluminium scrap (from automobile
shredders) covered by ISRI code word ‘Twire’;
Shredded non-ferrous scrap (predominantly aluminium)
covered by ISRI code word ‘Zorba’;
Aluminium drosses, spatterns, spellings, skimmings
and sweepings covered by ISRI code word ‘Thirl”;
New production aluminium extrusions covered by
ISRI code word ‘Tata’;
All aluminium radiators from automobiles covered by
ISRI code word ‘Tally’;
Aluminium extrusions ’10/10 covered by ISRI code
word ‘Toto’;
Aluminium extrusions dealer grade covered by the
word ‘Tutu’;
7602 00 90 — Other waste and scrap kg. 5% –
7603 ALUMINIUM POWDERS AND FLAKES
7603 10 – Powders of non-lamellar structure :
7603 10 10 — Aluminium powder for thermit process kg. 7.5% –
7603 10 90 — Other kg. 7.5% –
7603 20 00 – Powders of lamellar structure; flakes kg. 7.5% –
7604 ALUMINIUM BARS, RODS AND PROFILES
7604 10 – Of aluminium, not alloyed :
7604 10 10 — Wire rods kg. 7.5% –
7604 10 20 — Bars and rods, other than wire rods kg. 7.5% –
— Profiles :
7604 10 31 —- Hollow kg. 7.5% –
7604 10 39 —- Other kg. 7.5% –
- Of aluminium alloys :
7604 21 00 — Hollow profiles kg. 7.5% –
7604 29 — Other :
7604 29 10 — Hard drawn bare aluminium conductors steel kg. 7.5% –
re-inforced (A.C.S.R.)
7604 29 20 — Wire rods kg. 7.5% –
7604 29 30 — Bars and rods, other than wire rods kg. 7.5% –
7604 29 90 — Other kg. 7.5% –
7605 ALUMINIUM WIRE
- Of aluminium, not alloyed :
7605 11 00 — Of which the maximum cross-sectional kg. 7.5% –
dimension exceeds 7 mm
7605 19 — Other :
7605 19 10 — Of which the maximum cross-sectional kg. 7.5% –
dimension exceeds 6 mm but does not
(1) (2) (3) (4) (5)
SECTION-XV 669 CHAPTER-76
exceed 7 mm
— Other :
7605 19 91 —- Hard drawn bare-solid kg. 7.5% –
7605 19 99 —- Other kg. 7.5% – - Of aluminium alloys :
7605 21 00 — Of which the maximum cross-sectional kg. 7.5% –
dimension exceeds 7 mm
7605 29 — Other :
7605 29 10 — Of which the maximum cross-sectional kg. 7.5% –
dimension exceeds 6 mm but does not exceed 7 mm
7605 29 90 — Other kg. 7.5% –
7606 ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS
EXCEEDING 0.2 mm
- Rectangular (including square) :
7606 11 — Of aluminium, not alloyed :
7606 11 10 — Electrolytic plates or sheets kg. 7.5% –
7606 11 90 — Other kg. 7.5% –
7606 12 00 — Of aluminium alloys kg. 7.5% – - Other :
7606 91 — Of aluminium, not alloyed :
7606 91 10 — Circles kg. 7.5% –
7606 91 20 — Electrolytic plates or sheets kg. 7.5% –
7606 91 90 — Other kg. 7.5% –
7606 92 — Of aluminium alloys :
7606 92 10 — Circles kg. 7.5% –
7606 92 90 — Other kg. 7.5% –
7607 ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR
BACKED WITH PAPER, PAPERBOARD, PLASTICS OR
SIMILAR BACKING MATERIALS) OF A THICKNESS
(EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM
- Not backed :
7607 11 — Rolled but not further worked :
7607 11 10 — Ordinarily used for tea chest lining kg. 7.5% –
7607 11 90 — Other kg. 7.5% –
7607 19 — Other :
7607 19 10 — Ordinarily used for tea chest lining kg. 7.5% –
— Other :
7607 19 91 —- Plain kg. 7.5% –
7607 19 92 —- Embossed kg. 7.5% –
7607 19 93 —- Perforated or cut-to-shape kg. 7.5% –
7607 19 94 —- Coated kg. 7.5% –
7607 19 95 —- Printed kg. 7.5% –
7607 19 99 —- Other kg. 7.5% –
(1) (2) (3) (4) (5)
SECTION-XV 670 CHAPTER-76
7607 20 – Backed :
7607 20 10 — Ordinarily used for tea chest lining kg. 7.5% –
7607 20 90 — Other kg. 7.5% –
7608 ALUMINIUM TUBES AND PIPES
7608 10 00 – Of aluminium, not alloyed kg. 10% –
7608 20 00 – Of aluminium alloys kg. 10% –
7609 00 00 ALUMINIUM TUBE OR PIPE FITTINGS kg. 10% –
(FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES)
7610 ALUMINIUM STRUCTURES (EXCLUDING
PREFABRICATED BUILDINGS OF HEADING 9406) AND
PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND
BRIDGE-SECTIONS, TOWERS, LATTICE MASTS, ROOFS,
ROOFING FRAMEWORKS, DOORS AND WINDOWS AND
THEIR FRAMES AND THRESHOLDS FOR DOORS,
BALUSTRADES, PILLARS AND COLUMNS); ALUMINIUM
PLATES, RODS, PROFILES, TUBES AND THE LIKE,
PREPARED FOR USE IN STRUCTURES
7610 10 00 – Doors, windows and their frames and thresholds kg. 10% –
for doors
7610 90 – Other :
7610 90 10 — Structures kg. 10% –
7610 90 20 — Parts of structures, not elsewhere specified kg. 10% –
7610 90 30 — Aluminium plates , rods, profiles, tubes and the kg. 10% –
like, prepared for use in structure
7610 90 90 — Other kg. 10% –
7611 00 00 ALUMINIUM RESERVOIRS, TANKS, VATS AND SIMILAR kg. 10% –
CONTAINERS, FOR ANY MATERIAL (OTHER THAN
COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY
EXCEEDING 300 L, WHETHER OR NOT LINED OR
HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL
OR THERMAL EQUIPMENT
7612 ALUMINIUM CASKS, DRUMS, CANS, BOXES AND
SIMILAR CONTAINERS (INCLUDING RIGID OR
COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY
MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED
GAS), OF A CAPACITY NOT EXCEEDING 300 l,
WHETHER OR NOT LINED OR HEAT-INSULATED, BUT
NOT FITTED WITH MECHANICAL OR THERMAL
EQUIPMENT
7612 10 – Collapsible tubular containers :
(1) (2) (3) (4) (5)
SECTION-XV 671 CHAPTER-76
7612 10 10 — Plain kg. 10% –
7612 10 20 — Lacquered kg. 10% –
7612 10 30 — Printed kg. 10% –
7912 10 90 — Other kg. 10% –
7612 90 – Other :
7612 90 10 — Plain kg. 10% –
7612 90 20 — Lacquered kg. 10% –
7612 90 30 — Printed kg. 10% –
7612 90 90 — Other kg. 10% –
7613 ALUMINIUM CONTAINERS FOR COMPRESSED OR
LIQUEFIED GAS
7613 00 – Aluminium containers for compressed or liquefied
gas :
— Low pressure cylinders :
7613 00 11 —- Plain kg. 10% –
7613 00 12 —- Lacquered kg. 10% –
7613 00 13 —- Printed kg. 10% –
7613 00 19 —- Other kg. 10% –
— High pressure cylinders :
7613 00 21 —- Plain kg. 10% –
7613 00 22 —- Lacquered kg. 10% –
7613 00 23 —- Printed kg. 10% –
7613 00 29 —- Other kg. 10% –
— Other :
7613 00 91 —- Plain kg. 10% –
7613 00 92 —- Lacquered kg. 10% –
7613 00 93 —- Printed kg. 10% –
7613 00 99 —- Other kg. 10% –
7614 STRANDED WIRE, CABLES, PLAITED BANDS AND THE
LIKE, OF ALUMINIUM, NOT ELECTRICALLY INSULATED
7614 10 00 – With steel core kg. 10% –
7614 90 00 – Other kg. 10% –
7615 TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES
AND PARTS THEREOF, OF ALUMINIUM; POT SCOURERS
AND SCOURING OR POLISHING PADS, GLOVES AND THE
LIKE, OF ALUMINIUM; SANITARY WARE AND PARTS
THEREOF, OF ALUMINIUM
7615 10 – Table, kitchen or other household articles and
parts thereof; pot scourers and scouring or
polishing pads, gloves and the like:
- – – Pressure cookers, solar collectors:
7615 10 11 – – – – Pressure cookers kg. 10% (
1) (2) (3) (4) (5)
SECTION-XV 672 CHAPTER-76
7615 10 12 – – – Solar collectors kg. 10% – - – Utensils:
7615 10 21 – – – – Non-stick kg. 10% 7615
10 29 – – — Other kg. 10% 7615
10 30 – – – Other table, kitchen or household articles kg. 10% 7615
10 40 – – – Pot scourers and scouring or polishing pads, gloves kg. 10% and
the like
7615 10 90 – – – Parts kg. 10% –
7615 20 – Sanitary ware and parts thereof :
7615 20 10 — Sanitary ware of aluminium and aluminium kg. 10% –
alloys for indoor use
7615 20 20 — Parts kg. 10% –
7615 20 90 — Other kg. 10% –
7616 OTHER ARTICLES OF ALUMINIUM
7616 10 00 – Nails, tacks, staples (other than those of kg. 10% –
heading 8305), screws, bolts, nuts, screw hooks,
rivets, cotters, cotter-pins, washers and
similar articles
- Other :
7616 91 00 — Cloth, grill, netting and fencing, of aluminium wire kg. 10% –
7616 99 — Other :
7616 99 10 — Expanded metal of aluminium and aluminium alloys kg. 10% –
7616 99 20 — Chains kg. 10% –
7616 99 30 — Bobbins kg. 10% –
7616 99 90 — Other kg. 10% –
[Notfn. No. 26/09-Cus., dt.23.3.2009]
Whereas, in the matter of import of all goods falling under tariff heading 7606 (Aluminium Flat
Rolled Products) and all goods falling under tariff heading 7607 (Aluminium Foil), respectively of the
First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the said Act),
from People’s Republic of China, the Director General (Safeguard), in preliminary findings vide number
G.S.R. 65 (E), dated the 2nd February, 2009, published in the Gazette of India, Extraordinary, Part II,
Section 3, Sub-section (i), dated the 2nd February, 2009, had come to the conclusion that increased
imports of Aluminium Flat Rolled Products and Aluminium Foil into India from People’s Republic of
China had caused and threatened to cause market disruption to domestic industry of Aluminium Flat
Rolled Products and Aluminium Foil and it necessitates the imposition of provisional safeguard duty
on imports of Aluminium Flat Rolled Products and Aluminium Foil into India from People’s Republic
of China ;
Now, therefore, in exercise of the powers conferred by sub-section (2) of section 8C of the
(1) (2) (3) (4) (5)
SECTION-XV 673 CHAPTER-76
said Act, read with rules 10 and 14 of the Customs Tariff (Transitional Product Specific Safeguard
Duty) Rules, 2002, the Central Government after considering the said findings of the Director General
(Safeguard), hereby imposes a safeguard duty:-
a) at the rate of 21 per cent. ad valorem on all goods falling under heading 7606 (Aluminium Flat
Rolled Products) of the First Schedule to the said Act, when imported into India from People’s Republic
of China; and
b) at the rate of 35 per cent. ad valorem on all goods falling under heading 7607 (Aluminium
Foil) of the First Schedule to the said Act, when imported into India from People’s Republic of China.
- The safeguard duty imposed under this notification shall be effective upto and inclusive of the
8th October, 2009 (unless revoked, superseded or amended earlier).
[Notfn. No. 71/09-Cus., dt.19.6.2009]
Whereas, in the matter of import of Aluminium Flat Rolled Products falling under heading
7606 and Aluminium Foils falling under heading 7607, of the First Schedule to the Customs Tariff
Act, 1975 (51 of 1975) (hereinafter referred to as the said Act), from People’s Republic of China, the
Director General (Safeguard), in its preliminary findings vide number G.S.R. 65 (E), dated the 2nd
February, 2009, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i),
dated the 2nd February, 2009, had come to the conclusion that increased imports of Aluminium Flat
Rolled Products and Aluminium Foil into India from People’s Republic of China had caused and
threatened to cause market disruption to domestic industry of Aluminium Flat Rolled Products and
Aluminium Foils, and that this had necessitated the imposition of provisional safeguard duty on imports
of Aluminium Flat Rolled Products and Aluminium Foil into India from People’s Republic of China;
And whereas, on the basis of the aforesaid findings of the Director General (Safeguard), the
Central Government had imposed provisional Safeguard duty on the subject goods vide notification of
the Government of India in the Ministry of Finance (Department of Revenue), No. 26/2009-CUSTOMS,
dated the 23rd March, 2009, published in the Gazette of India vide number G.S.R. 187(E), dated the
23rd March, 2009;
And whereas, the Director General (Safeguard), in its Final findings vide number G.S.R. 369(E),
dated the 29th May, 2009, published in the Gazette of India, Extraordinary, Part II, Section 3, Subsection
(i), dated the 29th May, 2009, had come to the conclusion that increased imports of Aluminium
Flat Rolled Products and Aluminium Foil into India from People’s Republic of China had caused and
threatened to cause market disruption to domestic industry of Aluminium Flat Rolled Products and
Aluminium Foil and it necessitated the imposition of definitive safeguard duty on imports of Aluminium
Flat Rolled Products and Aluminium Foil into India from People’s Republic of China ;
Now, therefore, in exercise of the powers conferred by sub-section (2) of section 8C of the
said Act, read with rules 12 and 14 of the Customs Tariff (Transitional Product Specific Safeguard
Duty) Rules, 2002, the Central Government after considering the said findings of the Director General
(Safeguard), hereby imposes a safeguard duty —
(A) on Aluminium Flat Rolled Products falling under heading 7606 excludingSECTION-
XV 674 CHAPTER-76
(a) Colour Coated Aluminium Coil with either PE (Polyester) Coating or PVDF
(fluorine carbon) Coating falling under CTH 7606
(b) Aluminium Composite panels,
(c) Aluminium-Manganese-Silicon based and/or Aluminium-
Magnesium-Silicon based alloys whether clad or unclad; with thickness between 0.05
mm to 3.00 mm; with post brazing yield strength greater than 45 MPA, falling under
tariff heading 7606 for use in heat exchangers including radiators, charge air coolers,
condensers, oil coolers, heater cores, evaporators, heat ventilation and air conditioning
(HVAC) systems and parts thereof, at the rate of :—
i. 14% ad valorem, when imported from the 23rd day of March, 2009 to
22nd day March, 2010 (both days inclusive); and
ii. 12% ad valorem, when imported from the 23rd day of March, 2010 to
22nd day March, 2011 (both days inclusive);
(B) on Aluminium Foil falling under heading 7607 excluding —
(a) Aluminium Foil of thickness less than 7 micron falling under CTH 7607
(b) “Aluminium foil of 10.5 micron with rough surface and perforated whether
printed or not; to be used by beer bottling unit”
(c) Colour Coated Aluminium Coil with either PE (Polyester) Coating or PVDF
(fluorine-carbon) Coating falling under CTH 7607.
(d) Etched or formed Aluminium Foils falling under CTH 7607 meant to be used in
the manufacture of Electrolytic capacitors.
(e) Poly Aluminium Foil Coated with Copolymer falling under CTH 7607 to be used
in the manufacture of PIJF Telecom Copper Cables or Optical Fiber Cables.
(f) Aluminium-Manganese-Silicon based and/or Aluminium-
Magnesium-Silicon based alloys, whether clad or unclad; with thickness between 0.05
mm to 3.00 mm; with post brazing yield strength greater than 45 MPA, falling under
tariff heading 7607 for use in heat exchangers including radiators, charge air coolers,
condensers, oil coolers, heater cores, evaporators, heat ventilation and air conditioning
(HVAC) systems and parts thereof. at the rate of :—
i. 30% ad valorem, when imported from the 23rd day of March, 2009 to
22nd day March, 2010 (both days inclusive); and
ii. 25% ad valorem, when imported from the 23rd day of March, 2010 to
22nd day March, 2011 (both days inclusive); - The Safeguard duty imposed under this notification shall be levied with effect from the date of
imposition of the provisional Safeguard duty, that is, the 23rd March, 2009.
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
ISI Mark, BIS Certified, NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marking, PED Certified, PED Approved,
European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019,
API 6A (American Petroleum Institute), ISO 9001 Certified, NADCAP Certified, EN9100 Certified, AS9100 Certified with EN 10204 3.2 Certificate
duly Certified & Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping),
NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com