SECTION-XV 662 CHAPTER-75
CHAPTER 75
Nickel and articles thereof
NOTE :
In this Chapter, the following expressions have the meanings hereby assigned to them:
(a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid crosssection
along their whole length in the shape of circles, ovals, rectangles (including squares),
equilateral triangles or regular convex polygons (including “flattened circles” and “modified
rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of
equal length and parallel). Products with a rectangular (including square), triangular or polygonal
cross-section may have corners rounded along their whole length. The thickness of such products,
which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of
the width. The expression also covers cast or sintered products, of the same forms and dimensions,
which have been subsequently worked after production (otherwise than by simple trimming or
de-scaling), provided that they have not thereby assumed the character of articles or products of
other headings.
(b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section
along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates,
sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same
forms, which have been subsequently worked after production (otherwise than by simple trimming
or de-scaling), provided that they have not thereby assumed the character of articles or products of
other headings.
(c) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along
their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles
or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two
opposite sides are convex arcs, the other two sides being straight, of equal length and parallel).
Products with a rectangular (including square), triangular or polygonal cross-section may have
corners rounded along their whole length. The thickness of such products which have a rectangular
(including “modified rectangular”) cross-section exceeds one-tenth of the width.
(d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 7502), coiled or not,
of solid rectangular (other than square) cross-section with or without rounded corners (including
“modified rectangles” of which two opposite sides are convex arcs, the other two sides being
straight, of equal length and parallel) of a uniform thickness, which are:
(i) of rectangular (including square) shape with a thickness not exceeding one-tenth of
the width;
(ii) of a shape other than rectangular or square, of any size, provided that they do not
assume the character of articles or products of other headings.
Heading 7506 applies, inter alia, to plates, sheets, strip and foil with patterns (for example,
grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated,
corrugated, polished or coated, provided that they do not thereby assume the character of articles
or products of other headings.
SECTION-XV 663 CHAPTER-75
(e) Tubes and pipes
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed
void along their whole length in the shape of circles, ovals, rectangles (including squares),
equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products
with a rectangular (including square), equilateral triangular, or regular convex polygonal crosssection,
which may have corners rounded along their whole length, are also to be considered as
tubes and pipes provided the inner and outer cross-sections are concentric and have the same
form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated,
bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
SUB-HEADING NOTES :
- In this Chapter the following expressions have the meanings hereby assigned to them:
(a) Nickel, not alloyed
Metal containing by weight at least 99% of nickel plus cobalt, provided that:
(i) the cobalt content by weight does not exceed 1.5%; and
(ii) the content by weight of any other element does not exceed the limit specified in
the following Table:
TABLE – OTHER ELEMENTS
Elements Limiting content %
by weight
Fe Iron 0.5
O Oxygen 0.4
Other elements, each 0.3
(b) Nickel alloys
Metallic substances in which nickel predominates by weight over each of the other elements
provided that:
(i) the content by weight of cobalt exceeds 1.5%,
(ii) the content by weight of at least one of the other elements is greater than the limit
specified in the foregoing table, or
(iii) the total content by weight of elements other than nickel plus cobalt exceeds 1%. - Notwithstanding the provisions of Chapter Note 1(c), for the purposes of sub-heading 7508 10, the
term “wire” applies only to products, whether or not in coils, of any cross-sectional shape, of which no
cross-sectional dimension exceeds 6 mm.
Tariff Item Description of goods Unit Rate of duty
Standard Preferential
Areas
(1) (2) (3) (4) (5)
7501 NICKEL MATTES, NICKEL OXIDE SINTERS AND OTHER INTERMEDIATE
PRODUCTS OF NICKEL METALLURGY
7501 10 00 – Nickel mattes kg. 5% –
7501 20 00 – Nickel oxide sinters and other intermediate kg. 5% –
products of nickel metallurgy
SECTION-XV 664 CHAPTER-75
7502 UNWROUGHT NICKEL
7502 10 00 – Nickel, not alloyed kg. 5% –
7502 20 – Nickel alloys :
7502 20 10 — Cupro-nickel containing more than 40% kg. 5% –
by weight of nickel
7502 20 20 — Monel metal including ‘K’ monel kg. 5% –
7502 20 30 — Nickel alloys containing more than 40% by kg. 5% –
weight of nickel
7502 20 40 — Nickel alloys containing more than 10 % but not kg. 5% –
more than 40 % by weight of nickel
7502 20 90 — Other kg. 5% –
7503 NICKEL WASTE AND SCRAP
7503 00 – Nickel waste and scrap :
7503 00 10 — Nickel scrap, namely the following : kg. 5% –
New nickel scrap covered by ISRI code word
‘Aroma’; old nickel scrap covered by ISRI code
word ‘Burly’; new cupro nickel clips and solids
covered by ISRI code word ‘Dandy’; cupro nickel
solids covered by ISRI code word’Daunt’;
soldered cupro-nickel solids covered by ISRI
code word ‘Delta’; cupro nickel spinnings,
turnings, borings covered by ISRI code word
‘Decoy’; miscellaneous nickel copper and nickel
copper iron covered by ISRI code word ‘Depth’;
new R-monel clippings solids covered by ISRI
code word ‘Hitch’; new mixed monel solids and
clippings covered by ISRI code word ‘House’; old
monel sheet and solids covered by ISRI code
word ‘Ideal’; k-monel solids covered by ISRI
code word ‘Indian’; soldered monel sheet and
solids covered by ISRI code word ‘Junto’; monel
castings covered by ISRI code ‘ Lemon’; monel
turnings covered by ISRI code word ‘Lemur’;
nickel scrap obtained by breaking up of ships,
boats and other floating structures;
Nickel-Iron batteries to be sold free of crates,
copper terminal connectors and excess liquid,
must be free of nickel cadmium batteries covered
by ISRI code word ‘Vaunt’.
7503 00 90 — Other kg. 5% –
7504 00 00 NICKEL POWDERS AND FLAKES kg. 5% –
7505 NICKEL BARS, RODS, PROFILES AND WIRE
(1) (2) (3) (4) (5)
SECTION-XV 665 CHAPTER-75
- Bars, rods and profiles :
7505 11 — Of nickel, not alloyed :
7505 11 10 — Hollow bars kg. 5% –
7505 11 20 — Other bars; rods and profiles kg. 5% –
7505 12 — Of nickel alloys :
7505 12 10 — Hollow bars kg. 5% –
7505 12 20 — Other bars; rods and profiles kg. 5% – - Wire :
7505 21 00 — Of nickel, not alloyed kg. 5% –
7505 22 00 — Of nickel alloys kg. 5% –
7506 NICKEL PLATES, SHEETS, STRIP AND FOIL
7506 10 00 – Of nickel, not alloyed kg. 5% –
7506 20 00 – Of nickel alloys kg. 5% –
7507 NICKEL TUBES, PIPES AND TUBE OR PIPE FITTINGS
(FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES)
- Tubes and pipes :
7507 11 00 — Of nickel, not alloyed kg. 5% –
7507 12 00 — Of nickel alloys kg. 5% –
7507 20 00 – Tube or pipe fittings kg. 5% –
7508 OTHER ARTICLES OF NICKEL
7508 10 00 – Cloth, grill and netting, of nickel wire kg. 5% –
7508 90 – Other :
7508 90 10 — Electroplating anodes of nickel kg. 5% –
7508 90 20 — Blanks ordinarily used for manufacturing kg. 5% –
tubes and pipes of nickel
7508 90 30 — Nickel screen kg. 5% –
7508 90 90 — Other articles of nickel and nickel alloy kg. 5% –
(1) (2) (3) (4) (5)
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
ISI Mark, BIS Certified, NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marking, PED Certified, PED Approved,
European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019,
API 6A (American Petroleum Institute), ISO 9001 Certified, NADCAP Certified, EN9100 Certified, AS9100 Certified with EN 10204 3.2 Certificate
duly Certified & Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping),
NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com