SECTION-XV 652 CHAPTER-74
CHAPTER 74
Copper and articles thereof
NOTE :
In this Chapter, the following expressions have the meanings hereby assigned to them:
(a) Refined copper
Metal containing at least 99.85 per cent. by weight of copper; or
Metal containing at least 97.5 per cent. by weight of copper, provided that the content by
weight of any other element does not exceed the limit specified in the following Table :
TABLE – OTHER ELEMENTS
Element Limiting content % by weight
Ag Silver 0.25
As Arsenic 0.5
Cd Cadmium 1.3
Cr Chromium 1.4
Mg Magnesium 0.8
Pb Lead 1.5
S Sulphur 0.7
Sn Tin 0.8
Te Tellurium 0.8
Zn Zinc 1.0
Zr Zirconium 0.3
Other elements *, each 0.3
- Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si.
(b) Copper alloys
Metallic substances other than unrefined copper in which copper predominates by weight
over each of the other elements, provided that :
(i) the content by weight of at least one of the other elements is greater than the limit specified
in the foregoing table; or
(ii) the total content by weight of such other elements exceeds 2.5 per cent.
( c ) Master alloys
Alloys containing with other elements more than 10 per cent by weight, of copper not usefully
malleable and commonly used as an additive in the manufacture of other alloys or as
deoxidants, de-sulphuring agents or for similar uses in the metallurgy of non-ferrous metals.
SECTION-XV 653 CHAPTER-74
However, copper phosphide (phosphor copper) containing more than 15% by weight of phosphorous
falls in heading 2853.
(d) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid crosssection
along their whole length in the shape of circles, ovals, rectangles (including squares),
equilateral triangles or regular convex polygons (including “flattened circles” and “modified
rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of
equal length and parallel). Products with a rectangular (including square), triangular or polygonal
cross-section may have corners rounded along their whole length. The thickness of such products
which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of
the width. The expression also covers cast or sintered products, of the same forms and dimensions,
which have been subsequently worked after production (otherwise than by simple trimming or
de-scaling), provided that they have not thereby assumed the character of articles or products of
other headings.
Wire-bars and billets with their ends tapered or otherwise worked simply to facilitate their
entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes,
are however to be taken to be unwrought copper of heading 7403.
(e) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform crosssection
along their whole length, which do not conform to any of the definitions of bars, rods,
wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered
products, of the same forms, which have been subsequently worked after production (otherwise
than by simple trimming or de-scaling), provided that they have not thereby assumed the character
of articles or products of other headings.
(f) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section
along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral
triangles or regular convex polygons (including “flattened circles” and “modified rectangles”,
of which two opposite sides are convex arcs, the other two sides being straight, of equal length
and parallel). Products with a rectangular (including square), triangular or polygonal crosssection
may have corners rounded along their whole length. The thickness of such products
which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of
the width.
(g) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 7403), coiled or not,
of solid rectangular (other than square) cross-section with or without rounded corners (including
“modified rectangles” of which two opposite sides are convex arcs, the other two sides being
straight, of equal length and parallel) of a uniform thickness, which are:
(i) of a rectangular (including square) shape with a thickness not exceeding one-tenth of the
width,
(ii) of a shape other than rectangular or square, of any size, provided that they do not assume
the character of articles or products of other headings.
SECTION-XV 654 CHAPTER-74
Headings 7409 and 7410 apply, inter alia, to plates, sheets, strip and foil with patterns (for
example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have
been perforated, corrugated, polished or coated, provided that they do not thereby assume the
character of articles or products of other headings.
(h) Tubes and Pipes
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed
void along their whole length in the shape of circles, ovals, rectangles (including squares),
equilateral triangles or regular convex polygons, and which have a uniform wall thickness.
Products with a rectangular (including square), equilateral triangular or regular convex polygonal
cross-section, which may have corners rounded along their whole length, are also to be taken to
be tubes and pipes provided the inner and outer cross-sections are concentric and have the same
form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated,
bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
SUB-HEADING NOTE :
In this Chapter the following expressions have the meanings hereby assigned to them:
(a) Copper-zinc base alloys (brasses)
Alloys of copper and zinc, with or without other elements. When other elements
are present:
(i) zinc predominates by weight over each of such other elements;
(ii) any nickel content by weight is less than 5%. [see copper-nickel-zinc alloys (nickel silvers)];
and
(iii) any tin content by weight is less than 3%. [see copper-tin alloys (bronzes)].
(b) Copper-tin base alloys (bronzes)
Alloys of copper and tin, with or without other elements. When other elements are present,
tin predominates by weight over each of such other elements, except that when the tin content is
3% or more the zinc content by weight may exceed that of tin but must be less than 10%.
(c) Copper-nickel-zinc base alloys (nickel silvers)
Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5%
or more by weight [see copper-zinc alloys (brasses)].
(d) Copper-nickel base alloys
Alloys of copper and nickel, with or without other elements but in any case containing by
weight not more than 1% of zinc. When other elements are present, nickel predominates by
weight over each of such other elements.
Tariff Item Description of goods Unit Rate of duty
Standard Preferential
Areas
(1) (2) (3) (4) (5)
7401 COPPER MATTES; CEMENT COPPER (PRECIPITATED
COPPER)
SECTION-XV 655 CHAPTER-74
7401 00 – Copper mattes; Cement copper (precipitated
copper):
7401 00 10 — Copper mattes Kg. 5% –
7401 00 90 — Cement copper (precipitated copper) kg. 5% –
7402 UNREFINED COPPER; COPPER ANODES FOR
ELECTROLYTIC REFINING
7402 00 – Unrefined copper; copper anodes for electrolytic
refining :
7402 00 10 — Blister copper kg. 5% –
7402 00 90 — Other kg. 5% –
7403 REFINED COPPER AND COPPER ALLOYS, UNWROUGHT
- Refined copper :
7403 11 00 — Cathodes and sections of cathodes kg. 5% –
7403 12 00 — Wire-bars kg. 5% –
7403 13 00 — Billets kg. 5% –
7403 19 00 — Other kg. 5% – - Copper alloys :
7403 21 00 — Copper-zinc base alloys (brass) kg. 5% –
7403 22 — Copper-tin base alloys (bronze) :
7403 22 10 — Phosphor bronze kg. 5% –
7403 22 90 — Other kg. 5% –
7403 29 00 — Other copper alloys (other than master alloys kg. 5% –
of heading 7405)
7404 COPPER WASTE AND SCRAP
7404 00 – Copper waste and scrap:
— Of copper :
7404 00 11 —- Empty or discharged cartridges of all bores and sizes kg. 5% –
7404 00 12 —- Copper scrap, namely the following : kg. 5% –
copper wire scrap covered by ISRI code words
Barley, Berry and Birch; heavy copper scrap
covered by ISRI code word Candy;unalloyed
copper scrap covered by ISRI code word Cliff;
copper wire nodules scrap covered by ISRI code
words Clove, Cobra and Cocoa; light copper
scrap covered by ISRI Code word Dream;
muntz metal tubes covered by ISRI code word
Palms; Miscellaneous copper-containing skimming,
grindings, ashes, irony brass and copper, residues
and slags covered by ISRI code word ‘Drove’
(1) (2) (3) (4) (5)
SECTION-XV 656 CHAPTER-74
Copper wire scrap with various types of insultation
covered by ISRI code word ‘Druid’
7404 00 19 —- Other kg. 5% –
— Of copper alloys :
7404 00 21 —- Empty or discharged cartridges of all bores kg. 5% –
and sizes
7404 00 22 —- Brass scrap, namely the following : kg. 5% –
refinery brass scrap covered by ISRI code word
Drink; composition of red brass scrap covered by
ISRI code word Ebony; red brass composition
turnings scrap covered by ISRI code word Enerv;
genuine babbit-lined brass bushings scrap covered
by ISRI code word Elder; machinery or hard brass
solids scrap covered by ISRI code word Engel;
machinery or hand brass solids scrap covered by
ISRI code word Erin; cocks and faucets scrap
covered by ISRI code word Grape; yellow brass
scrap covered by ISRI code word Honey; yellow
brass castings covered by ISRI code word Ivory;
new brass clippings covered by ISRI code word
Label; yellow brass primer covered by ISRI code
word Lark; brass pipe covered by ISRI code word
Melon; yellow brass rod turnings covered by ISRI
code word Night;new yellow brass rod ends
covered by ISRI code word Noble; yellow brass
turnings covered by ISRI code word Nomad;
mixed unsweated auto radiators covered by ISRI
code word Ocean; a dmiralty brass condenser
tubes covered by ISRI code word Pales;
aluminium brass condenser tubes covered by ISRI
code word Pallu; manganese bronze solids
covered ISRI code word ‘Parch”;
High Grade – Low Lead Bronze/Brass Solids
covered by ISRI cover word Éland”;
High lead bronze solids and borings covered by ISRI
code word ‘Élias”;
Clean fired 70/30 brass shell cases free of primers
and any other foreign material covered by ISRI
code word ‘Lace”;
Clean fired 70/30 brass shell cases containing the
brass primers and containing no ther foreign
material covered by ISRI code word ‘Lady”;
Clean fired 70/30 brass shells free of bullets, iron
(1) (2) (3) (4) (5)
SECTION-XV 657 CHAPTER-74
and any other foreign material covered by ISRI
word ”Lake’; Clean muffled (popped)70/30 brass
shells free of bullets, iron and any other foreign
material covered by ISRI code word ‘Lamb’
7404 00 23 —- Nickel silver scrap namely the following: kg. 5% –
mixed new nickel silver clippings covered by
ISRI code word ‘Maize’; new nickel silver
clippings covered by ISRI code word ‘Major’;
new segregated nickel silver clippings covered by
ISRI code word ‘Malar’; old nickel silver clippings
covered by ISRI code word ‘Malic’; nickel
silver castings covered by ISRI code word
‘Naggy’; nickel silver turnings covered by ISRI
code word ‘Niece’
7404 00 29 —- Other kg. 5% –
7405 00 00 MASTER ALLOYS OF COPPER kg. 5% –
7406 COPPER POWDERS AND FLAKES
7406 10 00 – Powders of non-lamellar structure kg. 5% –
7406 20 00 – Powders of lamellar structure; flakes kg. 5% –
7407 COPPER BARS, RODS AND PROFILES
7407 10 – Of refined copper :
7407 10 10 — Electrolytic copper rods or black copper rods kg. 5% –
7407 10 20 — Other copper rods kg. 5% –
7407 10 30 — Copper bars (excluding hollow bars) kg. 5% –
7407 10 40 — Hollow bars of copper kg. 5% –
— Profiles :
7407 10 51 —- Hollow profiles kg. 5% –
7407 10 59 —- Other kg. 5% –
7407 10 90 — Other kg. 5% –
- Of copper alloys :
7407 21 — Of copper-zinc base alloys (brass) :
7407 21 10 — Bars kg. 5% –
7407 21 20 — Rods kg. 5% –
7407 21 30 — Hollow bars kg. 5% –
7407 21 90 — Other kg. 5% –
7407 29 — Other :
7407 29 10 — Rods of bronze and similar alloys kg. 5% –
— Profiles :
7407 29 21 —- Hollow kg. 5% –
7407 29 29 —- Other kg. 5% –
(1) (2) (3) (4) (5)
SECTION-XV 658 CHAPTER-74
7407 29 90 — Other kg. 5% –
7408 COPPER WIRE
- Of refined copper :
7408 11 — Of which the maximum cross-sectional dimension
exceeds 6 mm :
7408 11 10 — Copper weld wire kg. 5% –
7408 11 90 — Other kg. 5% –
7408 19 — Other :
7408 19 10 — Copper weld wire kg. 5% –
7408 19 20 — Welding wire kg. 5% –
7408 19 90 — Other kg. 5% – - Of copper alloys :
7408 21 — Of copper-zinc base alloys (brass) :
7408 21 10 — Of which the maximum cross-sectional kg. 5% –
dimension exceeds 6 mm
7408 21 90 — Other kg. 5% –
7408 22 — Of copper-nickel base alloys (cupro-nickel) or
copper-nickel-zinc base alloys (nickel silver) :
7408 22 10 — Silver plated flattened wire of copper (lametta) kg. 5% –
7408 22 20 — Other of which the maximum cross-sectional kg. 5% –
dimension exceeds 6 mm
7408 22 90 — Other kg. 5% –
7408 29 — Other :
7408 29 10 — Wire of bronze and similar alloys kg. 5% –
7408 29 90 — Other kg. 5% –
7409 COPPER PLATES, SHEETS AND STRIP, OF A THICKNESS
EXCEEDING 0.12.5 MM
- Of refined copper :
7409 11 00 — In coils kg. 5% –
7409 19 00 — Other kg. 5% – - Of copper-zinc base alloys (brass) :
7409 21 00 — In coils kg. 5% –
7409 29 00 — Other kg. 5% – - Of copper-tin base alloys (bronze) :
7409 31 00 — In coils kg. 5% –
7409 39 00 — Other kg. 5% –
7409 40 00 – Of copper-nickel base alloys (cupro-nickel) or kg. 5% –
copper-nickel-zinc base alloys (nickel silver)
7409 90 00 – Of other copper alloys kg. 5% –
7410 COPPER FOIL (WHETHER OR NOT PRINTED OR BACKED
WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR
(1) (2) (3) (4) (5)
SECTION-XV 659 CHAPTER-74
BACKING MATERIALS) OF A THICKNESS (EXCLUDING
ANY BACKING) NOT EXCEEDING 0.12.5 MM
- Not backed :
7410 11 00 — Of refined copper kg. 5% –
7410 12 00 — Of copper alloys kg. 5% – - Backed :
7410 21 00 — Of refined copper kg. 5% –
7410 22 00 — Of copper alloys kg. 5% –
7411 COPPER TUBES AND PIPES
7411 10 00 – Of refined copper kg. 10% –
- Of copper alloys :
7411 21 00 — Of copper-zinc base alloys (brass) kg. 10% –
7411 22 00 — Of copper-nickel base alloys (cupro-nickel) or kg. 10% –
copper-nickel-zinc base alloys (nickel silver)
7411 29 00 — Other kg. 10% –
7412 COPPER TUBE OR PIPE FITTINGS (FOR EXAMPLE,
COUPLINGS, ELBOWS, SLEEVES)
7412 10 00 – Of refined copper kg. 10% –
7412 20 – Of copper alloys :
— Brass :
7412 20 11 —- Tube-well strainer kg. 10% –
7412 20 12 —- Hose connectors kg. 10% –
7412 20 19 —- Other kg. 10% –
7412 20 90 — Fittings of bronze or other alloys of copper kg. 10% –
7413 00 00 STRANDED WIRE, CABLES, PLATED BANDS AND THE kg. 10% –
LIKE, OF COPPER, NOT ELECTRICALLY INSULATED
7414 OMITTED
7415 NAILS, TACKS, DRAWING PINS, STAPLES (OTHER THAN
THOSE OF HEADING 8305) AND SIMILAR ARTICLES, OF
COPPER OR OF IRON OR STEEL WITH HEADS OF
COPPER; SCREWS, BOLTS, NUTS, SCREW HOOKS,
RIVETS, COTTERS, COTTER-PINS, WASHERS
(INCLUDING SPRING WASHERS) AND SIMILAR
ARTICLES, OF COPPER
7415 10 00 – Nails and tacks, drawing pins, staples and kg. 10% –
similar articles
- Other articles, not threaded :
7415 21 00 — Washers (including spring washers) kg. 10% –
7415 29 00 — Other kg. 10% – - Other threaded articles :
(1) (2) (3) (4) (5)
SECTION-XV 660 CHAPTER-74
7415 33 — Screws; bolts and nuts :
7415 33 10 — Screws for wood kg. 10% –
7415 33 90 — Other kg. 10% –
7415 39 — Other :
7415 39 10 — Rivets (excluding tubular or bifurcated) kg. 10% –
7415 39 90 — Other kg. 10% –
7417 OMITTED
7418 TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES
AND PARTS THEREOF, OF COPPER; POT SCOURERS AND
SCOURING OR POLISHING PADS, GLOVES AND THE
LIKE, OF COPPER; SANITARY WARE AND PARTS
THEREOF, OF COPPER
7418 10 – Table, kitchen or other household articles and
parts thereof; Pot scourers and scouring or
polishing pads, gloves and the like:
7418 10 10 – – – Pot scourers and scouring or polishing pads, gloves kg. 10% and
the like
- – – Utensils:
7418 10 21 – – – – Of Brass kg. 10% 7418
10 22 – – – – Of Copper kg. 10% 7418
10 23 – – – – Of other copper alloys kg. 10% 7418
10 24 – – – – E.P.N.S. Ware kg. 10% – - – Other:
7418 10 31 – – – – Of E.P.N.S kg. 10% 7418
10 39 – – — Other kg. 10% 7418
10 90 – – – Parts kg. 10% –
7418 20 – Sanitary ware and parts thereof :
7418 20 10 — Sanitary ware kg. 10% –
7418 20 20 — Parts of sanitary ware kg. 10% –
7419 OTHER ARTICLES OF COPPER
7419 10 – Chain and parts thereof :
7419 10 10 — Chain kg. 10% –
— Parts :
7419 10 21 —- Of copper chains kg. 10% –
7419 10 29 —- Other kg. 10% –
- Other :
7419 91 00 — Cast, moulded, stamped or forged, but not kg. 10% –
further worked
7419 99 — Other :
(1) (2) (3) (4) (5)
SECTION-XV 661 CHAPTER-74
7419 99 10 — Reservoirs, tanks, vats and similar containers kg. 10% –
of a capcity above 300 l
7419 99 20 — Articles of copper alloys electro-plated with kg. 10% –
nickel-silver
7419 99 30 — Articles of brass kg. 10% –
7419 99 40 — Copper worked articles kg. 10% –
7419 99 90 — Other articles of copper kg. 10% –
EXEMPTION NOTIFICATIONS
Exemption to copper cathodes, wire bars and wire rods.
[Notfn. No. 24/01-Cus. dt. 1.3.2001]
In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52
of 1962), read with sub-section (6) of section 3 and sub-section (1) of section 3A of the Customs Tariff Act,
1975 ( 51 of 1975) and in supersession of the notification of the Government of India in the Ministry of
Finance (Department of Revenue), No. 127/2000-Customs, dated the 5th October, 2000, published in the
Gazette of India vide number G.S.R. 771 (E), dated the 5th October, 2000, except as respects things done or
omitted to be done before such superesssion, the Central Government, being satisfied that it is necessary in
the public interest so to do, hereby exempts copper cathodes, wire bars and wire rods falling under Chapter
74 of the First Schedule to the said Customs Tariff Act and produced out of copper reverts, the said copper
reverts having been exported out of India for toll smelting or toll processing, when imported into India,-
(a) from so much of duty of customs leviable thereon which is specified in the said First Schedule,
(b) from so much of additional duty leviable thereon under sub-section (1) of section 3 of the said
Customs Tariff Act, and
(c) from so much of special additional duty leviable thereon under sub-section (1) of section 3A of
the said Customs Tariff Act,
as is in excess of the duties which would be leviable if the value of the said goods were equal to the aggregate
of –
(1) the toll smelting or toll processing costs, as the case may be, that is to say, –
(i) labour charges,
(ii) cost of material (other than the cost of the goods exported out of India) used in such toll
smelting or toll processing, and
(iii) any other charges which are payable in connection with the toll smelting or toll processing
abroad; and
(2) the insurance and freight charges both ways,
subject to the following conditions, namely :-
(I) the copper cathodes, wire bars or wire rods, as the case may be, are imported within one
year of the date of export of copper reverts out of India; and
(II) sufficient evidence is shown that the copper cathodes, wire bars or wire rods, as the case
may be, which are imported, have in fact been obtained out of toll smelting or toll processing of the copper
reverts exported out of India.
(1) (2) (3) (4) (5)
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
ISI Mark, BIS Certified, NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marking, PED Certified, PED Approved,
European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019,
API 6A (American Petroleum Institute), ISO 9001 Certified, NADCAP Certified, EN9100 Certified, AS9100 Certified with EN 10204 3.2 Certificate
duly Certified & Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping),
NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com