SECTION-XV 602 CHAPTER-72
Tariff Item Description of goods Unit Rate of duty
Standard Preferential
Areas
(1) (2) (3) (4) (5)
I.—PRIMARY MATERIALS; PRODUCTS IN
GRANULAR OR POWDER FORM
7201 PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER
PRIMARY FORMS
7201 10 00 – Non-alloy pig iron containing by weight 0.5% kg. 15% –
or less of phosphorus
7201 20 00 – Non-alloy pig iron containing by weight more kg. 15% –
than 0.5% of phosphorus
7201 50 – Alloy pig iron; spiegeleisen :
7201 50 10 — Cast iron kg. 15% –
7201 50 90 — Other kg. 15% –
7202 FERRO-ALLOYS
- Ferro-manganese :
7202 11 00 — Containing by weight more than 2% of carbon kg. 15% –
7202 19 00 — Other kg. 15% – - Ferro-silicon :
7202 21 00 — Containing by weight more than 55% of silicon kg. 15% –
7202 29 00 — Other kg. 15% –
7202 30 00 – Ferro-silico-manganese kg. 15% – - Ferro-chromium :
7202 41 00 — Containing by weight more than 4% of carbon kg. 15% –
7202 49 00 — Other kg. 15% –
7202 50 00 – Ferro-silico-chromium kg. 15% –
7202 60 00 – Ferro-nickel kg. 15% –
7202 70 00 – Ferro-molybdenum kg. 15% –
7202 80 00 – Ferro tungsten and ferro-silico-tungsten kg. 15% – - Other :
7202 91 00 — Ferro-titanium and Ferro-silico-titanium kg. 15% –
7202 92 00 — Ferro-vanadium kg. 15% –
7202 93 00 — Ferro-niobium kg. 15% –
7202 99 — Other :
— Ferro-phosphorus, Ferro-selenium, Ferrocobalt,
Ferro-columbium, Ferro-zirconium, Ferrotantalum
:
7202 99 11 —- Ferro-phosphorus kg. 15% –
7202 99 12 —- Ferro-selenium kg. 15% –
7202 99 13 —- Ferro-cobalt kg. 15% –
7202 99 14 —- Ferro-columbium kg. 15% –
7202 99 15 —- Ferro-zirconium kg. 15% –
SECTION-XV 603 CHAPTER-72
7202 99 16 —- Ferro-tantalum kg. 15% –
— Ferro-silico-zirconium, Ferro-silico-magnesium :
7202 99 21 —- Ferro-silico-zirconium kg. 15% –
7202 99 22 —- Ferro-silico-magnesium kg. 15% –
— Ferro-boron, charge-chrome :
7202 99 31 —- Ferro-boron kg. 15% –
7202 99 32 —- Charge-chrome kg. 15% –
7202 99 90 — Other kg. 15% –
7203 FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE
AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR
SIMILAR FORMS; IRON HAVING MINIMUM PURITY BY WEIGHT OF
99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS
7203 10 00 – Ferrous products obtained by direct reduction of kg. 15%
iron ore
7203 90 00 – Other kg. 15% –
7204 FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS
OF IRON OR STEEL
7204 10 00 – Waste and scrap of cast iron kg. 15% –
- Waste and scrap of alloy steel :
7204 21 — Of stainless steel :
7204 21 10 — Empty or discharged cartridges of all bores and sizes kg. 15% –
7204 21 90 — Other kg. 15% –
7204 29 — Other :
7204 29 10 — Empty or discharged cartridges of all bores and sizes kg. 15% –
7204 29 20 — Of high speed steel kg. 15% –
7204 29 90 — Other kg. 15% –
7204 30 00 – Waste and scrap of tinned iron or steel kg. 15% – - Other waste and scrap :
7204 41 00 — Turnings, shavings, chips, milling waste, saw dust, kg. 15% –
fillings, trimmings and stampings, whether or not in bundles
7204 49 00 — Other kg. 15% –
7204 50 00 – Remelting scrap ingots kg. 15% –
7205 GRANULES AND POWDERS, OF PIG IRON, SPIEGELEISEN, IRON OR STEEL
7205 10 – Granules :
— Of iron :
7205 10 11 —- Shot and angular grit kg. 15% –
7205 10 12 —- Wire pellets kg. 15% –
7205 10 19 —- Other kg. 15% –
— Of alloy steel :
7205 10 21 —- Shot and angular grit kg. 15% –
7205 10 22 —- Wire pellets kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 604 CHAPTER-72
7205 10 29 —- Other kg. 15% –
7205 10 90 — Other kg. 15% –
- Powders :
7205 21 00 — Of alloy steel kg. 15% –
7205 29 — Other :
7205 29 10 — Of iron kg. 15% –
7205 29 90 — Other kg. 15% –
II.—IRON AND NON-ALLOY STEEL
7206 IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER
PRIMARY FORMS (EXCLUDING IRON OF HEADING
7203)
7206 10 – Ingots :
7206 10 10 — Of iron kg. 15% –
7206 10 20 — Of high carbon steel kg. 15% –
7206 10 90 — Other kg. 15% –
7206 90 – Other :
— Of iron :
7206 90 11 —- Puddled bars and pilings kg. 15% –
7206 90 12 —- Blocks, lumps and similar forms kg. 15% –
7206 90 19 —- Other kg. 15% –
— Other :
7206 90 91 —- Puddled bars and pilings kg. 15% –
7206 90 92 —- Blocks, lumps and similar forms kg. 15% –
7206 90 99 —- Other kg. 15% –
7207 SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL
- Containing by weight less than 0.20% of carbon :
7207 11 — Of rectangular (including square) cross-section,
the width measuring less than twice the thickness
:
7207 11 10 — Electrical quality kg. 15% –
7207 11 20 — Forging quality kg. 15% –
7207 11 30 — Seamless steel tube quality kg. 15% –
7207 11 90 — Other kg. 15% –
7207 12 — Other, of rectangular (other than square)
cross-section :
7207 12 10 — Electrical quality kg. 15% –
7207 12 20 — Forging quality kg. 15% –
7207 12 30 — Seamless steel tube quality kg. 15% –
7207 12 90 — Other kg. 15% –
7207 19 — Other :
7207 19 10 — Forged blanks of non-alloy steel kg. 15% –
7207 19 20 — Mild steel billets kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 605 CHAPTER-72
7207 19 90 — Other kg. 15% –
7207 20 – Containing by weight 0.20% or more of carbon :
7207 20 10 — Forging quality kg. 15% –
7207 20 20 — Spring steel quality kg. 15% –
7207 20 30 — Seamless steel tube quality kg. 15% –
7207 20 90 — Other kg. 15% –
7208 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY
STEEL, OF A WIDTH OF 600 MM OR MORE, HOTROLLED,
NOT CLAD, PLATED OR COATED
7208 10 00 – In coils, not further worked than hot-rolled, with kg. 15% –
patterns in relief
- Other, in coils, not further worked than hotrolled,
pickled :
7208 25 — Of a thickness of 4.75 mm or more :
7208 25 10 — Plates kg. 15% –
7208 25 20 — Universal plates kg. 15% –
7208 25 30 — Sheets kg. 15% –
7208 25 40 — Strip kg. 15% –
7208 25 90 — Other kg. 15% –
7208 26 — Of a thickness of 3 mm or more but less than 4.75
mm :
7208 26 10 — Plates kg. 15% –
7208 26 20 — Universal plates kg. 15% –
7208 26 30 — Sheets kg. 15% –
7208 26 40 — Strip kg. 15% –
7208 26 90 — Other kg. 15% –
7208 27 — Of a thickness of less than 3 mm :
7208 27 10 — Plates kg. 15% –
7208 27 20 — Universal plates kg. 15% –
7208 27 30 — Sheets kg. 15% –
7208 27 40 — Strip kg. 15% –
7208 27 90 — Other kg. 15% – - Other, in coils, not further worked than hot-rolled:
7208 36 — Of a thickness exceeding 10 mm :
7208 36 10 — Plates kg. 15% –
7208 36 20 — Universal plates kg. 15% –
7208 36 30 — Sheets kg. 15% –
7208 36 40 — Strip kg. 15% –
7208 36 90 — Other kg. 15% –
7208 37 — Of a thickness of 4.75 mm or more but not
exceeding 10 mm :
7208 37 10 — Plates kg. 15% –
7208 37 20 — Universal plates kg. 15% –
7208 37 30 — Sheets kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 606 CHAPTER-72
7208 37 40 — Strip kg. 15% –
7208 37 90 — Other kg. 15% –
7208 38 — Of a thickness of 3 mm or more but less than
4.75 mm :
7208 38 10 — Plates kg. 15% –
7208 38 20 — Universal plates kg. 15% –
7208 38 30 — Sheets kg. 15% –
7208 38 40 — Strip kg. 15% –
7208 38 90 — Other kg. 15% –
7208 39 — Of a thickness of less than 3 mm :
7208 39 10 — Plates kg. 15% –
7208 39 20 — Universal plates kg. 15% –
7208 39 30 — Sheets kg. 15% –
7208 39 40 — Strip kg. 15% –
7208 39 90 — Other kg. 15% –
7208 40 – Not in coils, not further worked than hot-rolled, with
patterns in relief :
7208 40 10 — Plates kg. 15% –
7208 40 20 — Universal plates kg. 15% –
7208 40 30 — Sheets kg. 15% –
7208 40 40 — Strip kg. 15% –
7208 40 90 — Other kg. 15% – - Other, not in coils, not further worked than
hot-rolled :
7208 51 — Of a thickness exceeding 10 mm :
7208 51 10 — Plates kg. 15% –
7208 51 20 — Universal plates kg. 15% –
7208 51 30 — Sheets kg. 15% –
7208 51 40 — Strip kg. 15% –
7208 51 90 — Other kg. 15% –
7208 52 — Of a thickness of 4.75 mm or more but not
exceeding 10 mm :
7208 52 10 — Plates kg. 15% –
7208 52 20 — Universal plates kg. 15% –
7208 52 30 — Sheets kg. 15% –
7208 52 40 — Strip kg. 15% –
7208 52 90 — Other kg. 15% –
7208 53 — Of a thickness of 3 mm or more but less than
4.75 mm :
7208 53 10 — Plates kg. 15% –
7208 53 20 — Universal plates kg. 15% –
7208 53 30 — Sheets kg. 15% –
7208 53 40 — Strip kg. 15% –
7208 53 90 — Other kg. 15% –
7208 54 — Of a thickness of less than 3 mm :
(1) (2) (3) (4) (5)
SECTION-XV 607 CHAPTER-72
7208 54 10 — Plates kg. 15% –
7208 54 20 — Universal plates kg. 15% –
7208 54 30 — Sheets kg. 15% –
7208 54 40 — Strip kg. 15% –
7208 54 90 — Other kg. 15% –
7208 90 00 – Other kg. 15% –
7209 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY
STEEL, OF A WIDTH OF 600 MM OR MORE, COLDROLLED
(COLD-REDUCED), NOT CLAD, PLATED OR
COATED
- In coils, not further worked than cold-rolled (coldreduced)
:
7209 15 — Of a thickness of 3 mm or more :
7209 15 10 — Plates kg. 15% –
7209 15 20 — Sheets kg. 15% –
7209 15 30 — Strip kg. 15% –
7209 15 90 — Other kg. 15% –
7209 16 — Of a thickness exceeding 1 mm but less than 3 mm :
7209 16 10 — Plates kg. 15% –
7209 16 20 — Sheets kg. 15% –
7209 16 30 — Strip kg. 15% –
7209 16 90 — Other kg. 15% –
7209 17 — Of a thickness of 0.5 mm or more but not
exceeding 1 mm :
7209 17 10 — Plates kg. 15% –
7209 17 20 — Sheets kg. 15% –
7209 17 30 — Strip kg. 15% –
7209 17 90 — Other kg. 15% –
7209 18 — Of a thickness of less than 0.5 mm :
7209 18 10 — Plates kg. 15% –
7209 18 20 — Sheets kg. 15% –
7209 18 30 — Strip kg. 15% –
7209 18 90 — Other kg. 15% – - Not in coils, not further worked than coldrolled
(cold-reduced) :
7209 25 — Of a thickness of 3 mm or more :
7209 25 10 — Plates kg. 15% –
7209 25 20 — Sheets kg. 15% –
7209 25 30 — Strip kg. 15% –
7209 25 90 — Other kg. 15% –
7209 26 20 — Sheets kg. 15% –
7209 26 30 — Strip kg. 15% –
7209 26 90 — Other kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 608 CHAPTER-72
7209 27 — Of a thickness of 0.5 mm or more but not
exceeding 1 mm :
7209 27 10 — Plates kg. 15% –
7209 27 20 — Sheets kg. 15% –
7209 27 30 — Strip kg. 15% –
7209 27 90 — Other kg. 15% –
7209 28 — Of a thickness of less than 0.5 mm :
7209 28 10 — Plates kg. 15% –
7209 28 20 — Sheets kg. 15% –
7209 28 30 — Strip kg. 15% –
7209 28 90 — Other kg. 15% –
7209 90 00 – Other kg. 15% –
7210 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY
STEEL, OF A WIDTH OF 600 MM OR MORE, CLAD,
PLATED OR COATED
- Plated or coated with tin :
7210 11 — Of a thickness of 0.5 mm or more :
7210 11 10 — OTS/MR Type kg. 15% –
7210 11 90 — Other kg. 15% –
7210 12 — Of a thickness of less than 0.5 mm:
7210 12 10 — OTS/MR Type kg. 15% –
7210 12 90 — Other kg. 15% –
7210 20 00 – Plated or coated with lead, including terne-plate kg. 15% –
7210 30 – Electrolytically plated or coated with zinc :
7210 30 10 — Corrugated kg. 15% –
7210 30 90 — Other kg. 15% – - Otherwise plated or coated with zinc :
7210 41 00 — Corrugated kg. 15% –
7210 49 00 — Other kg. 15% –
7210 50 00 – Plated or coated with chromium oxides or with kg. 15% –
chromium and chromium oxides - Plated or coated with aluminium :
7210 61 00 — Plated or coated with aluminium-zinc alloys kg. 15% –
7210 69 00 — Other kg. 15% –
7210 70 00 – Painted, varnished or coated with plastics kg. 15% –
7210 90 – Other :
7210 90 10 — Lacquered kg. 15% –
7210 90 90 — Other kg. 15% –
7211 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY
STEEL, OF A WIDTH OF LESS THAN 600 MM, NOT
CLAD, PLATED OR COATED
- Not further worked than hot-rolled :
7211 13 00 — Rolled on four faces or in a closed box pass, of kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 609 CHAPTER-72
a width exceeding 150 mm and a thickness of
not less than 4 mm, not in coils and without
patterns in relief
7211 14 — Other, of a thickness of 4.75 mm or more :
7211 14 10 — Flats kg. 15% –
7211 14 20 — Universal plates kg. 15% –
7211 14 30 — Hoops kg. 15% –
7211 14 40 — Sheets kg. 15% –
7211 14 50 — Strip kg. 15% –
7211 14 60 — Skelp kg. 15% –
7211 14 90 — Other kg. 15% –
7211 19 — Other :
7211 19 10 — Flats kg. 15% –
7211 19 20 — Universal plates kg. 15% –
7211 19 30 — Hoops kg. 15% –
7211 19 40 — Sheets kg. 15% –
7211 19 50 — Strip kg. 15% –
7211 19 60 — Skelp kg. 15% –
7211 19 90 — Other kg. 15% – - Not further worked than cold-rolled (cold-reduced) :
7211 23 — Containing by weight less than 0.20% of carbon:
7211 23 10 — Flats kg. 15% –
7211 23 20 — Universal plates kg. 15% –
7211 23 30 — Hoops kg. 15% –
7211 23 40 — Sheets kg. 15% –
7211 23 50 — Strip kg. 15% –
7211 23 90 — Other kg. 15% –
7211 29 — Other :
7211 29 10 — Flats kg. 15% –
7211 29 20 — Universal plates kg. 15% –
7211 29 30 — Hoops kg. 15% –
7211 29 40 — Sheets kg. 15% –
7211 29 50 — Strip kg. 15% –
7211 29 60 — Skelp kg. 15% –
7211 29 90 — Other kg. 15% –
7211 90 – Other :
— Universal plates :
7211 90 11 —- Of boiler quality kg. 15% –
7211 90 12 —- Of high tensile quality kg. 15% –
7211 90 13 —- Of ship building quality kg. 15% –
7211 90 90 — Other kg. 15% –
7212 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY
STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD,
PLATED OR COATED
(1) (2) (3) (4) (5)
SECTION-XV 610 CHAPTER-72
7212 10 – Plated or coated with tin :
7212 10 10 — OTS or MR type kg. 15% –
7212 10 90 — Other kg. 15% –
7212 20 – Electrolytically plated or coated with zinc :
7212 20 10 — Corrugated kg. 15% –
7212 20 90 — Other kg. 15% –
7212 30 – Otherwise plated or coated with zinc :
7212 30 10 — Corrugated kg. 15% –
7212 30 90 — Other kg. 15% –
7212 40 00 – Painted, varnished or coated with plastics kg. 15% –
7212 50 – Otherwise plated or coated :
7212 50 10 — Plated or coated with lead kg. 15% –
7212 50 20 — Lacquered kg. 15% –
7212 50 90 — Other kg. 15% –
7212 60 00 – Clad kg. 15% –
7213 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY
WOUND COILS, OF IRON OR NON-ALLOY STEEL
7213 10 – Containing indentations, ribs, grooves or other
deformations produced during the rolling process :
7213 10 10 — Of free cutting steel kg. 15% –
7213 10 90 — Other kg. 15% –
7213 20 – Other, of free-cutting steel :
7213 20 10 — Electrode quality kg. 15% –
7213 20 20 — Cold heading quality kg. 15% –
7213 20 90 — Other kg. 15% –
- Other :
7213 91 — Of circular cross-section measuring less than
14 mm in diameter :
7213 91 10 — Electrode quality kg. 15% –
7213 91 20 — Cold heading quality kg. 15% –
7213 91 90 — Other kg. 15% –
7213 99 — Other :
7213 99 10 — Electrode quality kg. 15% –
7213 99 20 — Cold heading quality kg. 15% –
7213 99 90 — Other kg. 15% –
7214 OTHER BARS AND RODS OF IRON OR NON-ALLOY
STEEL, NOT FURTHER WORKED THAN FORGED, HOTROLLED,
HOT-DRAWN OR HOT-EXTRUDED, BUT
INCLUDING THOSE TWISTED AFTER ROLLING
7214 10 – Forged :
7214 10 10 — Spring steel quality kg. 15% –
7214 10 90 — Other kg. 15% –
7214 20 – Containing indentations, ribs, grooves or other
deformations
(1) (2) (3) (4) (5)
SECTION-XV 611 CHAPTER-72
produced during the rolling process or twisted
after rolling :
7214 20 10 — Spring steel quality kg. 15% –
7214 20 90 — Other kg. 15% –
7214 30 00 – Other, of free cutting steel kg. 15% –
- Other :
7214 91 — Of rectangular (other than square) cross-section :
7214 91 10 — Mild steel bright bar kg. 15% –
7214 91 90 — Other kg. 15% –
7214 99 — Other :
7214 99 10 — Of spring steel quality kg. 15% –
7214 99 90 — Other kg. 15% –
7215 OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL
7215 10 00 – Of free-cutting steel, not further worked than kg. 15% –
cold-formed or cold-finished
7215 50 – Other, not further worked than cold-formed or
cold-finished :
7215 50 10 — Mild steel bright bar kg. 15% –
7215 50 90 — Other kg. 15% –
7215 90 – Other :
7215 90 10 — Plated or coated with zinc kg. 15% –
7215 90 20 — Plated or coated with other base metals kg. 15% –
7215 90 90 — Other kg. 15% –
7216 ANGLES, SHAPES AND SECTIONS OF IRON OR NONALLOY
STEEL
7216 10 00 – U, I or H sections, not further worked than hot- kg. 15% –
rolled,hot-drawn or extruded, of a height of less
than 80 mm
- L or T sections, not further worked than hotrolled,
hot-drawn or extruded, of a height of less
than 80 mm :
7216 21 00 — L sections kg. 15% –
7216 22 00 — T sections kg. 15% – - U, I or H sections, not further worked than
hot-rolled, hot-drawn or extruded of a height
of 80 mm or more :
7216 31 00 — U sections kg. 15% –
7216 32 00 — I sections kg. 15% –
7216 33 00 — H sections kg. 15% –
7216 40 00 – L or T sections, not further worked than kg. 15% –
hot-rolled, hot-drawn or extruded, of a height
of 80 mm or more
(1) (2) (3) (4) (5)
SECTION-XV 612 CHAPTER-72
7216 50 00 – Other angles, shapes and sections, not further kg. 15% –
worked than hot-rolled, hot-drawn or extruded - Angles, shapes and sections, not further worked
than cold-formed or cold-finished :
7216 61 00 — Obtained from flat-rolled products kg. 15% –
7216 69 00 — Other kg. 15% – - Other:
7216 91 00 — Cold-formed or cold-finished from flat rolled kg. 15% –
products
7216 99 — Other :
7216 99 10 — Plated or coated with zinc kg. 15% –
7216 99 20 — Plated or coated with base metals other than zinc kg. 15% –
7216 99 30 — Slotted angles and slotted channels kg. 15% –
7216 99 40 — Forged kg. 15% –
7216 99 90 — Other kg. 15% –
7217 WIRE OF IRON OR NON-ALLOY STEEL
7217 10 – Not plated or coated, whether or not polished :
7217 10 10 — Of a thickness of 18 SWG and below kg. 15% –
7217 10 20 — Of a thickness above 18 SWG but up to 26 SWG kg. 15% –
7217 10 30 — Of a thickness above 26 SWG kg. 15% –
7217 20 – Plated or coated with zinc :
7217 20 10 — Of a thickness of 18 SWG and below kg. 15% –
7217 20 20 — Of a thickness above 18 SWG but up to 26 SWG kg. 15% –
7217 20 30 — Of a thickness above 26 SWG kg. 15% –
7217 30 – Plated or coated with other base metals :
7217 30 10 — Of a thickness of 18 SWG and below kg. 15% –
7217 30 20 — Of a thickness above 18 SWG but up to 26 SWG kg. 15% –
7217 30 30 — Of a thickness above 26 SWG kg. 15% –
7217 90 – Other :
— Shaped and profiled wire :
7217 90 11 —- Of cross section – half round kg. 15% –
7217 90 12 —- Of cross section – flat and rectangular kg. 15% –
7217 90 13 —- Of cross section – ‘z’ shaped kg. 15% –
7217 90 19 —- Of cross section – other shapes kg. 15% –
— Other :
7217 90 91 —- High tensile quality kg. 15% –
7217 90 92 —- Electrode quality kg. 15% –
7217 90 93 —- Electric resistance wire (including electric resistance kg. 15% –
heating wire)
7217 90 99 —- Other kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 613 CHAPTER-72
III.—STAINLESS STEEL
7218 STAINLESS STEEL IN INGOTS OR OTHER PRIMARY
FORMS; SEMI-FINISHED PRODUCTS OF STAINLESS
STEEL
7218 10 00 – Ingots and other primary forms kg. 15% –
- Other :
7218 91 00 — Of rectangular (other than square) cross-section kg. 15% –
7218 99 — Other :
7218 99 10 — Billets kg. 15% –
7218 99 90 — Other kg. 15% –
7219 FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH
OF 600 MM OR MORE
- Not further worked than hot-rolled, in coils :
7219 11 — Of a thickness exceeding 10 mm :
— Chromium type :
7219 11 11 —- Not exceeding 14 mm kg. 15% –
7219 11 12 —- Exceeding 14 mm kg. 15% –
7219 11 90 — Other kg. 15% –
7219 12 00 — Of a thickness of 4.75 mm or more but not kg. 15% –
exceeding 10 mm
7219 13 00 — Of a thickness of 3 mm or more but less than kg. 15% –
4.75 mm
7219 14 00 — Of a thickness of less than 3 mm kg. 15% – - Not further worked than hot-rolled, not in coils :
7219 21 — Of a thickness exceeding 10 mm :
— Universal plates of stainless steel or heat
resisting steel and chromium type :
7219 21 11 —- Not exceeding 14 mm kg. 15% –
7219 21 12 —- Exceeding 14 mm kg. 15% –
— Universal plates of stainless steel heat resisting
steel, nickel chromium austenitic type:
7219 21 21 —- Not exceeding 14 mm kg. 15% –
7219 21 22 —- Exceeding 14 mm kg. 15% –
— Other chromium type :
7219 21 31 —- Not exceeding 14 mm kg. 15% –
7219 21 32 —- Exceeding 14 mm kg. 15% –
— Other nickel chromium austenitic type :
7219 21 41 —- Not exceeding 14 mm kg. 15% –
7219 21 42 —- Exceeding 14 mm kg. 15% –
7219 21 90 — Other kg. 15% –
7219 22 — Of a thickness of 4.75 mm or more but not
exceeding 10 mm :
(1) (2) (3) (4) (5)
SECTION-XV 614 CHAPTER-72
— Universal plates of stainless steel or heat
resisting steel :
7219 22 11 —- Chromium type kg. 15% –
7219 22 12 —- Nickel chromium austenitic type kg. 15% –
7219 22 19 —- Other kg. 15% –
— Other :
7219 22 91 —- Chromium type kg. 15% –
7219 22 92 —- Nickel chromium austenitic type kg. 15% –
7219 22 99 —- Other kg. 15% –
7219 23 — Of a thickness of 3 mm or more but less than
4.75 mm :
7219 23 10 — Chromium type kg. 15% –
7219 23 20 — Nickel chromium austenitic type kg. 15% –
7219 23 90 — Other kg. 15% –
7219 24 — Of a thickness of less than 3 mm :
— Chromium type, of a thickness :
7219 24 11 —- Below 0.35 mm kg. 15% –
7219 24 12 —- 0.35 mm and above but below 0.56 mm kg. 15% –
7219 24 13 —- 0.56 mm and above but below 0.90 mm kg. 15% –
7219 24 19 —- Other kg. 15% –
— Nickel chromium austenitic type, of a thickness :
7219 24 21 —- Below 0.35 mm kg. 15% –
7219 24 22 —- 0.35 mm and above but below 0.56 mm kg. 15% –
7219 24 23 —- 0.56 mm and above but below 0.90 mm kg. 15% –
7219 24 29 —- Other kg. 15% –
7219 24 90 — Other kg. 15% – - Not further worked than cold-rolled (cold reduced) :
7219 31 — Of a thickness of 4.75 mm or more :
— Chromium type :
7219 31 11 —- Not exceeding 14 mm kg. 15% –
7219 31 12 —- Exceeding 14 mm kg. 15% –
— Nickel chromium austenitic type :
7219 31 21 —- Not exceeding 14 mm kg. 15% –
7219 31 22 —- Exceeding 14 mm kg. 15% –
7219 31 90 — Other kg. 15% –
7219 32 — Of a thickness of 3 mm or more but less than 4.75
mm :
7219 32 10 — Chromium type kg. 15% –
7219 32 20 — Nickel chromium austenitic type kg. 15% –
7219 32 90 — Other kg. 15% –
7219 33 — Of a thickness exceeding 1 mm but less than 3 mm :
7219 33 10 — Chromium type kg. 15% –
7219 33 20 — Nickel chromium austenitic type kg. 15% –
7219 33 90 — Other kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 615 CHAPTER-72
7219 34 — Of a thickness of 0.5 mm or more but not
exceeding 1 mm :
7219 34 10 — Chromium type kg. 15% –
7219 34 20 — Nickel chromium austenitic type kg. 15% –
7219 34 90 — Other kg. 15% –
7219 35 — Of a thickness of less than 0.5 mm :
7219 35 10 — Chromium type kg. 15% –
7219 35 20 — Nickel chromium austenitic type kg. 15% –
7219 35 90 — Other kg. 15% –
7219 90 – Other :
— Sheets and plates :
7219 90 11 —- Thickness more than 4.75 mm kg. 15% –
7219 90 12 —- Thickness 3 mm to 4.75 mm kg. 15% –
7219 90 13 —- Thickness less than 3 mm kg. 15% –
7219 90 90 — Other kg. 15% –
7220 FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH
OF LESS THAN 600 MM
- Not further worked than hot-rolled :
7220 11 — Of a thickness of 4.75 mm or more :
7220 11 10 — Skelp for pipes and tubes kg. 15% –
— Strips for pipes and tubes (other than skelp) :
7220 11 21 —- Chromium type kg. 15% –
7220 11 22 —- Nickel chromium austenitic type kg. 15% –
7220 11 29 —- Other kg. 15% –
7220 11 90 — Other kg. 15% –
7220 12 — Of a thickness of less than 4.75 mm :
7220 12 10 — Skelp for pipes and tubes kg. 15% –
— Strips for pipes and tubes (other than skelp) :
7220 12 21 —- Chromium type kg. 15% –
7220 12 22 —- Nickel chromium austenitic type kg. 15% –
7220 12 29 —- Other kg. 15% –
7220 12 90 — Other kg. 15% –
7220 20 – Not further worked than cold-rolled (cold- reduced) :
7220 20 10 — Skelp for pipes and tubes kg. 15% –
— Strips for pipes and tubes (other than skelp) :
7220 20 21 —- Chromium type kg. 15% –
7220 20 22 —- Nickel chromium austenitic type kg. 15% –
7220 20 29 —- Other kg. 15% –
7220 20 90 — Other kg. 15% –
7220 90 – Other :
7220 90 10 — Skelp (strips for pipes and tubes) kg. 15% –
— Strips for pipes and tubes (other than skelp) :
7220 90 21 —- Chromium type kg. 15% –
7220 90 22 —- Nickel chromium austenitic type kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 616 CHAPTER-72
7220 90 29 —- Other kg. 15% –
7220 90 90 — Other kg. 15% –
7221 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND
COILS, OF STAINLESS STEEL
7221 00 – Bars and rods, hot-rolled, in irregularly wound coils,
of stainless steel :
— Bright bars :
7221 00 11 —- Chromium type kg. 15% –
7221 00 12 —- Nickel chromium austenitic type kg. 15% –
7221 00 19 —- Other kg. 15% –
7221 00 90 — Other kg. 15% –
7222 OTHER BARS AND RODS OF STAINLESS STEEL;
ANGLES, SHAPES AND SECTIONS OF STAINLESS STEEL
- Bars and rods, not further worked than hot-rolled,
hot-drawn or extruded :
7222 11 — Of circular cross section :
— Bright bars :
7222 11 11 —- Chromium type kg. 15% –
7222 11 12 —- Nickel chromium austenitic type kg. 15% –
7222 11 19 —- Other kg. 15% –
— Other :
7222 11 91 —- Chromium type kg. 15% –
7222 11 92 —- Nickel chromium austenitic type kg. 15% –
7222 11 99 —- Other kg. 15% –
7222 19 — Other :
— Bright bars :
7222 19 11 —- Chromium type kg. 15% –
7222 19 12 —- Nickel chromium austenitic type kg. 15% –
7222 19 19 —- Other kg. 15% –
— Other :
7222 19 91 —- Chromium type kg. 15% –
7222 19 92 —- Nickel chromium austenitic type kg. 15% –
7222 19 99 —- Other kg. 15% –
7222 20 – Bars and rods, not further worked than cold-formed
or cold-finished :
— Bright bars :
7222 20 11 —- Chromium type kg. 15% –
7222 20 12 —- Nickel chromium austenitic type kg. 15% –
7222 20 19 —- Other kg. 15% –
— Other :
7222 20 91 —- Chromium type kg. 15% –
7222 20 92 —- Nickel chromium austenitic type kg. 15% –
7222 20 99 —- Other kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 617 CHAPTER-72
7222 30 – Other bars and rods :
— Bright bars :
7222 30 11 —- Chromium type kg. 15% –
7222 30 12 —- Nickel chromium austenitic type kg. 15% –
7222 30 19 —- Other kg. 15% –
— Other :
7222 30 91 —- Chromium type kg. 15% –
7222 30 92 —- Nickel chromium austenitic type kg. 15% –
7222 30 99 —- Other kg. 15% –
7222 40 – Angles, shapes and sections :
7222 40 10 — Of thickness of 80 mm and above kg. 15% –
7222 40 20 — Of below 80 mm kg. 15% –
7223 WIRE OF STAINLESS STEEL
7223 00 – Wire of stainless steel :
7223 00 10 — Electrode quality kg. 15% –
— Other :
7223 00 91 —- Of thickness of above 1.5 mm kg. 15% –
7223 00 92 —- Of thickness of 0.46 mm and above but not kg. 15% –
exceeding 1.5 mm
7223 00 99 —- Of thickness of below 0.46 mm kg. 15% –
IV.—OTHER ALLOY STEEL; HOLLOW
DRILL BARS AND RODS, OF ALLOY OR
NON-ALLOY STEEL
7224 OTHER ALLOY STEEL IN INGOTS OR OTHER PRIMARY
FORMS; SEMI-FINISHED PRODUCTS OF OTHER ALLOY
STEEL
7224 10 00 – Ingots and other primary forms kg. 15% –
7224 90 – Other :
7224 90 10 — Of tool steel quality kg. 15% –
7224 90 20 — Of die steel quality kg. 15% –
7224 90 30 — Of cobalt bearing high speed steel quality kg. 15% –
7224 90 40 — Forged blanks of alloy steel kg. 15% –
— Other :
7224 90 91 —- Billets kg. 15% –
7224 90 99 —- Other kg. 15% –
7225 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF
A WIDTH OF 600 MM OR MORE
- Of silicon-electrical steel :
7225 11 00 — Grain-oriented kg. 15% –
7225 19 — Other
7225 19 10 — Hot rolled kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 618 CHAPTER-72
7225 19 20 — Cold rolled kg. 15% –
7225 19 90 — Other kg. 15% –
7225 30 – Other, not further worked than hot-rolled, in coils :
7225 30 10 — Of spring steel quality kg. 15% –
7225 30 90 — Other kg. 15% –
7225 40 – Other, not further worked than hot-rolled, not in coils :
— Of a thickness of above 4.75 mm :
7225 40 11 —- Boiler quality kg. 15% –
7225 40 12 —- Pressure vessel quality kg. 15% –
7225 40 13 —- High tensile quality kg. 15% –
7225 40 19 —- Other kg. 15% –
7225 40 20 — Of a thickness of 3 mm and above but not exceeding kg. 15% –
4.75 mm
7225 40 30 — Of a thickness of below 3 mm kg. 15% –
7225 50 – Other, not further worked than cold-rolled
(cold-reduced) :
7225 50 10 — Of a thickness of less than 3 mm kg. 15% –
7225 50 20 — Of a thickness of 3 mm to 4.75 mm kg. 15% –
7225 50 30 — Of a thickness of above 4.75 mm kg. 15% – - Other :
7225 91 00 — Electrolytically plated or coated with zinc kg. 15% –
7225 92 00 — Otherwise plated or coated with zinc kg. 15% –
7225 99 00 — Other kg. 15% –
7226 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A
WIDTH OF LESS THAN 600 MM
- Of silicon-electrical steel :
7226 11 00 — Grain-oriented kg. 15% –
7226 19 — Other
7226 19 10 — Hot rolled kg. 15% –
7226 19 20 — Cold rolled kg. 15% –
7226 19 90 — Other kg. 15% –
7226 20 – Of high speed steel :
— Hot-rolled :
7226 20 11 —- In coils kg. 15% –
7226 20 12 —- Other kg. 15% –
— Cold-rolled :
7226 20 21 —- In coils kg. 15% –
7226 20 22 —- Other kg. 15% –
7226 20 30 — Hoops and strips kg. 15% – - Other:
7226 91 — Not further worked than hot-rolled :
7226 91 10 — Of a thickness of below 3 mm kg. 15% –
7226 91 20 — Of a thickness of 3 mm and above but not kg. 15% –
exceeding 4.75 mm
(1) (2) (3) (4) (5)
SECTION-XV 619 CHAPTER-72
7226 91 30 — High tensile quality of a thickness of above kg. 15% –
4.75 mm
7226 91 90 — Other kg. 15% –
7226 92 — Not further worked than cold-rolled (cold- reduced) :
7226 92 10 — Of a thickness of below 3 mm kg. 15% –
7226 92 20 — Of a thickness of 3 mm and above but not exceeding kg. 15% –
4.75 mm
7226 92 30 — Of a thickness of above 4.75 mm kg. 15% –
7226 99 — Other :
7226 99 10 — Of a thickness of above 4.75 mm kg. 15% –
7226 99 20 — Of a thickness of above 3 mm and but not exceeding kg. 15% –
4.75 mm
7226 99 30 — Of a thickness of below 3 mm kg. 15% –
7226 99 40 — Skelp (strips for pipes and tubes) kg. 15% –
— Hoops and strips :
7226 99 51 —- Hot rolled kg. 15% –
7226 99 52 —- Cold rolled kg. 15% –
7226 99 53 —- Of spring steel, other than skelp kg. 15% –
7226 99 60 — Skelps and strips for razor blades and saw blades kg. 15% –
7226 99 90 — Other kg. 15% –
7227 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY
WOUND COILS, OF OTHER ALLOY STEEL
7227 10 00 – Of high speed steel kg. 15% –
7227 20 00 – Of silico-manganese steel kg. 15% –
7227 90 – Other :
7227 90 10 — Valve spring steel quality kg. 15% –
7227 90 20 — Other spring steel quality kg. 15% –
7227 90 30 — Ball bearing quality kg. 15% –
7227 90 40 — Cold heading quality kg. 15% –
7227 90 50 — Lead-free cutting quality kg. 15% –
7227 90 60 — Sulphur free cutting quality kg. 15% –
7227 90 90 — Other kg. 15% –
7228 OTHER BARS AND RODS OF OTHER ALLOY STEEL;
ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY
STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR
NON-ALLOY STEEL
7228 10 – Bars and rods, of high speed steel :
7228 10 10 — Bright bars kg. 15% –
7228 10 90 — Other kg. 15% –
7228 20 00 – Bars and rods, of silico-manganese steel kg. 15% –
7228 30 – Other bars and rods, not further worked than
hot-rolled, hot-drawn or extruded :
— Bright bars :
(1) (2) (3) (4) (5)
SECTION-XV 620 CHAPTER-72
7228 30 11 —- Of alloy tool steel kg. 15% –
7228 30 19 —- Other kg. 15% –
— Other :
7228 30 21 —- Lead bearing steel kg. 15% –
7228 30 22 —- Spring steel kg. 15% –
7228 30 23 —- Sulphur bearing steel kg. 15% –
7228 30 24 —- Tool and die steel kg. 15% –
7228 30 29 —- Other kg. 15% –
7228 40 00 – Other bars and rods, not further worked than forged kg. 15% –
7228 50 – Other bars and rods, not further worked than
cold-formed or cold-finished :
7228 50 10 — Of engine valves and cold heading steel kg. 15% –
7228 50 90 — Other kg. 15% –
7228 60 – Other bars and rods :
— Bright bars :
7228 60 11 —- Of alloy tool steel kg. 15% –
7228 60 12 —- Other kg. 15% –
— Other :
7228 60 91 —- Lead bearing steel kg. 15% –
7228 60 92 —- Spring steel kg. 15% –
7228 60 93 —- Sulphur bearing steel kg. 15% –
7228 60 94 —- Tool and die steel kg. 15% –
7228 60 99 —- Other kg. 15% –
7228 70 – Angles, shapes and sections :
— Not further worked than hot-rolled, hot-drawn or
extruded :
7228 70 11 —- Of 80 mm or more kg. 15% –
7228 70 12 —- Of less than 80 mm kg. 15% –
— Not further worked than cold-formed or coldfinished
:
7228 70 21 —- Of 80 mm or more kg. 15% –
7228 70 22 —- Of less than 80 mm kg. 15% –
7228 80 – Hollow drill bars and rods :
7228 80 10 — Of alloy steel kg. 15% –
7228 80 20 — Of non alloy steel, forged kg. 15% –
7228 80 90 — Other kg. 15% –
7229 WIRE OF OTHER ALLOY STEEL
7229 20 00 – Of silico-manganese steel kg. 15% –
7229 90 – Other :
— Tinned wire, bronze coated wire, trapezoidal wire,
half round wire, crimped wire and copper coated
wire, not insulated :
7229 90 11 —- Tinned wire kg. 15% –
7229 90 12 —- Bronze coated wire kg. 15% –
(1) (2) (3) (4) (5)
SECTION-XV 621 CHAPTER-72
7229 90 13 —- Trapezoidal wire kg. 15% –
7229 90 14 —- Half round wire kg. 15% –
7229 90 15 —- Crimped wire kg. 15% –
7229 90 16 —- Copper coated wire kg. 15% –
— Electrode quality, wire rope quality and ACSR
quality not insulated :
7229 90 21 —- Electrode quality kg. 15% –
7229 90 22 —- Wire rope quality kg. 15% –
7229 90 23 —- ACSR quality kg. 15% –
— Wire (excluding wire type lead), spring, high
tensile, hardened and tempered wires, not
insulated :
7229 90 31 —- Wire (excluding wire type lead) kg. 15% –
7229 90 32 —- Spring wire kg. 15% –
7229 90 33 —- High tensile wire kg. 15% –
7229 90 34 —- Hardened and tempered wire kg. 15% –
7229 90 40 — Other wire kg. 15% –
— Shaped and profiled wires of cross-section :
7229 90 51 —- Half round kg. 15% –
7229 90 52 —- Flat and rectangular kg. 15% –
7229 90 53 —- ‘L’ shape kg. 15% –
7229 90 54 —- ‘Z’ shape kg. 15% –
7229 90 59 —- Other kg. 15% –
7229 90 60 — Electric resistance wire (including electric resistance kg. 15% –
heating wire)
7229 90 70 — Crimped wire kg. 15% –
7229 90 90 — Other kg. 15% –
EXEMPTION NOTIFICATIONS
Exemption to inputs required for the manufacture of iron and steel intermediates when imported into
India.
[Notfn. No. 10/95-Cus. dt. 7.3.1995 as amended by Notfn. Nos. 101/95-Cus. dt. 26.5.1995, 143/95-Cus.
dt. 19.5.1995, 157/95-Cus. dt. 9.11.1995, 23/96-Cus. dt. 15.6.1996]
In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962, the Central
Government, being satisfied that it is necessary in the public interest so to do, hereby exempts inputs required
for the manufacture of iron and steel intermediates when imported into India, from the whole of the duty of
customs leviable thereon under the First Schedule to the Customs Tariff Act, 1975 (51 of 1975), subject to the
following conditions, namely:-
(1) that the importer has been granted necessary import licence (hereinafter referred to as the said
licence) by the Licensing Authority for the import of the said inputs for the aforesaid purpose
in terms of Engineering Products Export (Replenishment of Iron and Steel Intermediates)
scheme as notified by the Government of India in the Ministry of Commerce Notification No.
(1) (2) (3) (4) (5)
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
ISI Mark, BIS Certified, NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marking, PED Certified, PED Approved,
European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019,
API 6A (American Petroleum Institute), ISO 9001 Certified, NADCAP Certified, EN9100 Certified, AS9100 Certified with EN 10204 3.2 Certificate
duly Certified & Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping),
NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com