EN 1561 Founding. Grey cast irons
EN 1562 Founding. Malleable cast irons
EN 1563 Founding. Spheroidal graphite cast irons
EN 1564 Founding. Austempered ductile cast irons
EN 12513 Founding. Abrasion resistant cast irons
EN 13835 Founding. Austenitic cast irons
EN ISO 4957 Tool steels
EN 10016 Non-alloy steel rods for drawing and/or cold rolling
EN 10025 Technical delivery conditions for structural steels
EN 10028 Flat products made of steels for pressure purposes
EN 10083 Steels for quenching and tempering
EN 10084 Case hardening steels
EN 10085 Nitriding steel
EN 10087 Free cutting steels
EN 10088 Stainless steels
EN 10089 Hot rolled steels for quenched and tempered springs
EN 10090 Valve steels and alloys for internal combustion engines
EN 10095 Heat Resisting Steels and Nickel Alloys
EN 10106 Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
EN 10107 Grain-oriented electrical steel sheet and strip delivered in the fully processed state
EN 10111 Continuously hot rolled low carbon steel sheet and strip for cold forming
EN 10113 Hot-rolled products in weldable fine grain structural steels
EN 10120 Steel sheet and strip for welded gas cylinders
EN 10130 Cold rolled low carbon steel flat products for cold forming
EN 10132 Cold rolled narrow steel strip for heat treatment
EN 10137 Plates and wide flats made of high yield strength structural steels in the quenched and tempered conditions
EN 10139 Cold rolled uncoated mild steel narrow strip for cold forming
EN 10142 Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming
EN 10147 Continuously hot-dip zinc coated structural steels strip and sheet
EN 10149 Specification for hot-rolled flat products made of high yield strength steels for cold forming
EN 10151 Stainless steel strip for springs
EN 10152 Electrolytically zinc coated cold rolled steel flat products for cold forming
EN 10154 Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet
EN 10162 Cold rolled steel sections
EN 10202 Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
EN 10207 Steels for simple pressure vessels
EN 10208 Steel pipes for pipelines for combustible fluids
EN 10209 Cold rolled low carbon steel flat products for vitreous enamelling
EN 10210 Hot finished structural hollow sections of non-alloy and fine grain steels
EN 10213 Steel castings for pressure purposes
EN 10216 Seamless steel tubes for pressure purposes
EN 10217 Welded steel tubes for pressure purposes
EN 10219 Cold formed welded structural hollow sections of non-alloy and fine grain steels
EN 10222 Steel forgings for pressure purposes
EN 10224 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids
EN 10225 Weldable structural steels for fixed offshore structures
EN 10248 Hot rolled sheet piling of non alloy steels
EN 10250 Open steel die forgings for general engineering purposes
EN 10253 Butt-welding pipe fittings
EN 10255 Non-alloy steel tubes suitable for welding and threading
EN 10263 Steel rod, bars and wire for cold heading and cold extrusion
EN 10265 Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
EN 10267 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
EN 10268 Cold rolled steel flat products with high yield strength for cold forming
EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10272 Stainless steel bars for pressure purposes
EN 10273 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10277 Bright steel products
EN 10283 Corrosion resistant steel castings
EN 10292 Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming
EN 10293 Steel castings for general engineering uses
EN 10295 Heat resistant steel castings
EN 10296 Welded circular steel tubes for mechanical and general engineering purposes
EN 10297 Seamless circular steel tubes for mechanical and general engineering purposes
EN 10302 Creep resisting steels, nickel and cobalt alloys
EN 10305 Steel tubes for precision applications
EN 10326 Continuously hot-dip coated strip and sheet of structural steels
EN 10327 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming
EN 10331 Magnetic materials. Specification for sintered soft magnetic materials
EN 10336 Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming
EN 10340 Steel castings for structural uses
EN 10341 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
EN 10346 Continuously hot-dip coated steel flat products
EN 10349 Steel castings. Austenitic manganese steel castings
EN ISO 636 Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels.
EN ISO 9453 Soft solder alloys. Chemical compositions and forms.
EN ISO 14172 Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys.
EN ISO 14343 Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels.
EN ISO 18273 Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys
EN 485 Aluminium and aluminium alloys. Sheet, strip and plate.
EN 546 Aluminium and aluminium alloys. Foil.
EN 570 Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products.
EN 573 Aluminium and aluminium alloys. Chemical composition and form of wrought products.
EN 603 Aluminium and aluminium alloys. Wrought forging stock.
EN 683 Aluminium and aluminium alloys. Finstock.
EN 754 Aluminium and aluminium alloys. Cold drawn rod/bar and tube.
EN 755 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles.
EN 851 Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils.
EN 941 Aluminium and aluminium alloys. Circle and circle stock for general applications.
EN 1301 Aluminium and aluminium alloys. Drawn wire.
EN 1386 Aluminium and aluminium alloys. Tread plate.
EN 1396 Aluminium and aluminium alloys. Coil coated sheet and strip for general applications.
EN 1592 Aluminium and aluminium alloys. HF seam welded tubes.
EN 1706 Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
EN 1715 Aluminium and aluminium alloys. Drawing stock.
EN 12392 Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipmentEN 14121 Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications
EN 1172 Copper and copper alloys. Sheet and strip for building purposes
EN 1652 Copper and copper alloys. Plate, sheet, strip and circles for general purposes
EN 1653 Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units
EN 1654 Copper and copper alloys. Strip for springs and connectors
EN 1758 Copper and copper alloys. Strip for lead frames
EN 1976 Copper and copper alloys. Cast unwrought copper products
EN 1981 Copper and copper alloys. Master alloys
EN 1982 Copper and copper alloys. Ingots and castings
EN 12163 Copper and copper alloys. Rod for general purposes
EN 12164 Copper and copper alloys. Rod for free machining purposes
EN 12165 Copper and copper alloys. Wrought and unwrought forging stock
EN 12166 Copper and copper alloys. Wire for general purposes
EN 12167 Copper and copper alloys. Profiles and rectangular bar for general purposes
EN 12168 Copper and copper alloys. Hollow rod for free machining purposes
EN 12420 Copper and copper alloys. Forgings
EN 12449 Copper and copper alloys. Seamless, round tubes for general purposes
EN 12451 Copper and copper alloys. Seamless, round tubes for heat exchangers
EN 12452 Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
EN 12861 Copper and copper alloys. Scrap
EN 13148 Copper and copper alloys. Hot-dip tinned strip
EN 13599 Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
EN 13600 Copper and copper alloys. Seamless copper tubes for electrical purposes
EN 13601 Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
EN 13602 Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductorsEN 13605 Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
EN 1753 Magnesium and magnesium alloys. Magnesium alloy ingots and castings
EN 12421 Magnesium and magnesium alloys. Unalloyed magnesiumEN 12438 Magnesium and magnesium alloys. Magnesium alloys for cast anodes
EN 988 Zinc and zinc alloys. Specification for rolled flat products for building
EN 1179 Zinc and zinc alloys. Primary zinc
EN 1774 Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid
EN 12844 Zinc and zinc alloys. Castings. SpecificationsEN 13283 Zinc and zinc alloys. Secondary zinc
EN 12548 Lead and lead alloys. Lead alloy ingots for electric cable sheathing and for sleeves
EN 12588 Lead and lead alloys. Rolled lead sheet for building purposes
EN 12659 Lead and lead alloys. LeadEN 50307 Lead and lead alloys. Lead and lead alloy sheaths and sleeves of electric cables
EN 610 Tin and tin alloys. Ingot tin
EN 611 Tin and tin alloys. Tin and tin alloys. Pewter and pewterwareWorldwide Equivalents
CAST IRON
Worldwide Equivalent Grades STEEL
Worldwide Equivalent Grades
Australia ( AS )
Austria ( ONORM, ON)
Belgium ( NBN )
Bulgaria (BDS )
COPANT
China ( GB )
Denmark ( DS )
England ( BS )
Finland ( SFS )
France ( AFNOR NF )
Germany ( DIN, WNr)
Netherlands ( NEN )
Hungary ( MSZ )
India ( IS )
International ( ISO )
Italy ( UNI )
Luxembourg
Norway ( NS )
Poland ( PN )
Romania ( STAS )
Russia ( GOST )
Spain ( UNE )
Sweden ( SS )
Taiwan
USA ( AISI, ASTM, UNS )
Japan ( JIS )
Austria ( ONORM, ON)
Belgium ( NBN )
Canada ( CSA )
China ( GB )
Czechia ( CSN )
England ( BS )
European old ( EU, EN )
Finland ( SFS )
France ( AFNOR NF )
Germany ( DIN, WNr)
India ( IS )
International ( ISO )
Italy ( UNI )
Norway ( NS )
Poland ( PN )
Portugal ( NP )
Russia ( GOST )
Spain ( UNE )
Sweden ( SS )
USA ( AISI, ASTM, UNS )
Japan ( JIS )
Brazing, soldering, welding alloys
Equivalent Grades Aluminium and aluminium alloys
Equivalent Grades Copper and copper alloys
Equivalent Grades Magnesium and magnesium alloys
Equivalent Grades Zinc and zinc alloys
Equivalent Grades
England ( BS )
Germany ( DIN, WNr )
International ( ISO )
USA ( AISI, ASTM, UNS )
Japan ( JIS )
Austria (ONORM, ON)
Czechia ( CSN )
England ( BS )
France ( AFNOR NF )
Germany ( DIN, WNr)
International ( ISO )
Italy ( UNI )
Poland ( PN )
Russia ( GOST )
Sweden ( SS )
USA ( AISI, ASTM, UNS )
Japan ( JIS )
Austria ( ONORM, ON)
Czechia ( CSN )
England ( BS )
France ( AFNOR NF )
Germany ( DIN, WNr)
International ( ISO )
Italy ( UNI )
Poland ( PN )
Russia ( GOST )
Sweden ( SS )
USA ( AISI, ASTM, UNS )
Japan ( JIS )
England ( BS )
France ( AFNOR NF )
Germany ( DIN, WNr)
International ( ISO )
USA ( AISI, ASTM, UNS )
England ( BS )
France ( AFNOR NF )
Germany ( DIN, WNr)
Italy ( UNI )
Norway ( NS )
Portugal ( NP )
Spain ( UNE )
Sweden ( SS )
USA ( AISI, ASTM, UNS )
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, BS EN 9001, BS EN 9100, AS 9100D, IATF 16949, NADCAP Certified, CE Marked,
European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019,
API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified & Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register),
GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA,
IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com