EN 12123 : 2012 ; Chemicals used for treatment of water intended for human consumption. Ammonium sulfate.
EN 12124 : 1999 ; Chemicals used for treatment of water intended for human consumption. Sodium sulfite.
EN 12124 : 2005 ; Chemicals used for treatment of water intended for human consumption. Sodium sulfite.
EN 12124 : 2012 ; Chemicals used for treatment of water intended for human consumption. Sodium sulfite.
EN 12125 : 1999 ; Chemicals used for treatment of water intended for human consumption. Sodium thiosulfate.
EN 12125 : 2005 ; Chemicals used for treatment of water intended for human consumption. Sodium thiosulfate.
EN 12125 : 2012 ; Chemicals used for treatment of water intended for human consumption. Sodium thiosulfate.
EN 12126 : 1999 ; Chemicals used for treatment of water intended for human consumption. Liquefied ammonia.
EN 12126 : 2005 ; Chemicals used for treatment of water intended for human consumption. Liquefied ammonia.
EN 12126 : 2012 ; Chemicals used for treatment of water intended for human consumption. Liquefied ammonia.
EN 12127 : 1998 ; Textiles. Fabrics. Determination of mass per unit area using small samples.
EN 12128 : 1998 ; Biotechnology. Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements.
EN 12130 : 1998 ; Feather and down. Test methods. Determination of the filling power (massic volume).
EN 12131 : 1998 ; Feather and down. Test methods. Determination of the quantitive composition of feather and down (manual method).
EN 12132-1 : 1999 ; Feather and down. Methods of testing the down-proof properties of fabrics. Rubbing test
EN 12132-2 : 1999 ; Feather and down. Methods of testing the down-proof properties of fabrics. Impact test
EN 12133 : 1998 ; Fruit and vegetable juices. Determination of chloride content. Potentiometric titration method.
EN 12134 : 1998 ; Fruit and vegetable juices. Determination of centrifugable pulp content.
EN 12135 : 1998 ; Fruit and vegetable juices. Determination of nitrogen content. Kjeldahl method.
EN 12136 : 1998 ; Fruit and vegetable juices. Determination of total carotenoid content and individual carotenoid fractions.
EN 12137 : 1998 ; Fruit and vegetable juices. Determination of tartaric acid in grape juices. Method by high performance liquid chromatography.
EN 12138 : 1998 ; Fruit and vegetable juices. Enzymatic determination of D-malic acid content. NAD spectrometric method.
EN 12139 : 1999 ; Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC.
EN 12143 : 1997 ; Fruit and vegetable juices. Estimation of soluble solids content. Refractometric method.
EN 12144 : 1997 ; Fruit and vegetable juices. Determination of total alkalinity of ash. Titrimetric method.
EN 12145 : 1997 ; Fruit and vegetable juices. Determination of total dry matter. Gravimetric method with loss of mass on drying.
EN 12146 : 1997 ; Fruit and vegetable juices. Enzymatic determination of sucrose content. NADP spectrometric method.
EN 12147 : 1997 ; Method for determination of titratable acidity of fruit and vegetable juices.
EN 12148 : 1997 ; Fruit and vegetable juices. Determination of hesperidin and naringin in citrus juices. Method using high performance liquid chromatography.
EN 12149 : 1998 ; Wallcoverings in roll form. Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release.
EN 12150-1 : 2000 ; Glass in building. Thermally toughened soda lime silicate safety glass. Definition and description
EN 12150-1 : 2015 ; Glass in building. Thermally toughened soda lime silicate safety glass. Definition and description
EN 12151 : 2007 ; Machinery and plants for the preparation of concrete and mortar. Safety requirements.
EN 12153 : 2000 ; Curtain walling. Air permeability. Test method.
EN 12154 : 2000 ; Curtain walling. Watertightness. Performance requirements and classification.
EN 12155 : 2000 ; Curtain walling. Watertightness. Laboratory test under static pressure.
EN 12157 : 1999 ; Rotodynamic pumps. Coolant pump units for machine tools. Nominal flow rate, dimensions.
EN 12159 : 2012 ; Builders hoists for persons and materials with vertically guided cages.
EN 12162 : 2001+A1 : 2009 ; Liquid pumps. Safety requirements. Procedure for hydrostatic testing.
EN 12163 : 1998 ; Copper and copper alloys. Rod for general purposes.
EN 12163 : 2011 ; Copper and copper alloys. Rod for general purposes.
EN 12163 : 2016 ; Copper and copper alloys. Rod for general purposes.
EN 12164 : 1998 ; Copper and copper alloys. Rod for free machining purposes.
EN 12164 : 2011 ; Copper and copper alloys. Rod for free machining purposes.
EN 12164 : 2016 ; Copper and copper alloys. Rod for free machining purposes.
EN 12165 : 1998 ; Copper and copper alloys. Wrought and unwrought forging stock.
EN 12165 : 2011 ; Copper and copper alloys. Wrought and unwrought forging stock.
EN 12165 : 2016 ; Copper and copper alloys. Wrought and unwrought forging stock.
EN 12166 : 1998 ; Copper and copper alloys. Wire for general purposes.
EN 12166 : 2011 ; Copper and copper alloys. Wire for general purposes.
EN 12166 : 2016 ; Copper and copper alloys. Wire for general purposes.
EN 12167 : 1998 ; Copper and copper alloys. Profiles and rectangular bar for general purposes.
EN 12167 : 2011 ; Copper and copper alloys. Profiles and bars for general purposes.
EN 12167 : 2016 ; Copper and copper alloys. Profiles and bars for general purposes.
EN 12168 : 1998 ; Copper and copper alloys. Hollow rod for free machining purposes.
EN 12168 : 2011 ; Copper and copper alloys. Hollow rod for free machining purposes.
EN 12168 : 2016 ; Copper and copper alloys. Hollow rod for free machining purposes.
EN 12173 : 1999 ; Chemicals used for treatment of water intended for human consumption. Sodium fluoride.
EN 12173 : 2005 ; Products used for treatment of water intended for human consumption. Sodium fluoride.
EN 12173 : 2012 ; Chemicals used for treatment of water intended for human consumption. Sodium fluoride.
EN 12174 : 2006 ; Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate.
EN 12174 : 2013 ; Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate.
EN 12175 : 2006 ; Chemicals used for treatment of water intended for human consumption. Hexafluorosilicic acid.
EN 12175 : 2013 ; Chemicals used for treatment of water intended for human consumption. He xafluorosilicic acid.
EN 12176 : 1998 ; Characterization of sludge. Determination of pH value.
EN 12178 : 2016 ; Refrigerating systems and heat pumps. Liquid level indicating devices. Requirements, testing and marking.
EN 12179 : 2000 ; Curtain walling. Resistance to wind load. Test method.
EN 12180 : 2000 ; Non-active surgical implants. Body contouring implants. Specific requirements for mammary implants.
EN 12182 : 1999 ; Technical aids for disabled persons. General requirements and test methods.
EN 12182 : 2012 ; Assistive products for persons with disability. General requirements and test methods.
EN 12183 : 1999 ; Manually propelled wheelchairs. Requirements and test methods.
EN 12183 : 2009 ; Manual wheelchairs. Requirements and test methods.
EN 12183 : 2014 ; Manual wheelchairs. Requirements and test methods.
EN 12184 : 1999 ; Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods.
EN 12184 : 2009 ; Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods.
EN 12184 : 2014 ; Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods.
EN 12186 : 2000 ; Gas supply systems. Gas pressure regulating stations for transmission and distribution. Functional requirements.
EN 12186 : 2014 ; Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements.
EN 12188 : 1999 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion steel-to-steel for characterization of structural bonding agents.
EN 12189 : 1999 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of open time.
EN 12190 : 1999 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of compressive strength of repair mortar.
EN 12192-2 : 1999 ; Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for fillers for polymer bonding agents
EN 12194 : 2000 ; Shutters, external and internal blinds. Misuse. Test methods.
EN 12195-1 : 2003 ; Load restraint assemblies on road vehicles. Safety. Calculation of lashing forces
EN 12195-1 : 2010 ; Load restraining on road vehicles. Safety . Calculation of securing forces
EN 12195-2 : 2001 ; Load restraint assemblies on road vehicles. Safety. Web lashing made from man-made fibres
EN 12195-4 : 2003 ; Load restraint assemblies on road vehicles. Safety. Lashing steel wire ropes
EN 12196 : 1997 ; Gymnastics equipment. Horses and bucks. Functional and safety requirements, test methods.
EN 12197 : 1997 ; Gymnastic equipment. Horizontal bars. Safety requirements and test methods.
EN 12198-1 : 2000+A1 : 2008 ; Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. General principles
EN 12199 : 1998 ; Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings.
EN 12199 : 2010 ; Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings.
EN 12200-1 : 2016 ; Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
EN 12201-1 : 2011 ; Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). General
EN 12201-2 : 2011+A1 : 2013 ; Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Pipes
EN 12201-3 : 2011+A1 : 2012 ; Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Fittings
EN 12201-4 : 2012 ; Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Valves
EN 12201-5 : 2011 ; Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) . Fitness for purpose of the system
EN 12207 : 2000 ; Windows and doors. Air permeability. Classification.
EN 12208 : 2000 ; Windows and doors. Watertightness. Classification.
EN 12209 : 2016 ; Building hardware. Mechanically operated locks and locking plates. Requirements and test methods.
EN 12210 : 2000 ; Windows and doors. Resistance to wind load. Classification.
EN 12210 : 2016 ; Windows and doors. Resistance to wind load. Classification.
EN 12211 : 2000 ; Windows and doors. Resistance to wind load. Test method.
EN 12211 : 2016 ; Windows and doors. Resistance to wind load. Test method.
EN 12213 : 1999 ; Cryogenic vessels. Methods for performance evaluation of thermal insulation.
EN 12218 : 1999 ; Rail systems for supporting medical equipment.
EN 12219 : 2000 ; Doors. Climatic influences. Requirements and classification.
EN 12220 : 1998 ; Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation.
EN 12221-1 : 2000 ; Changing units for domestic use. Safety requirements
EN 12221-1 : 2008+A1 : 2013 ; Child use and care articles. Changing units for domestic use. Safety requirements
EN 12221-2 : 2000 ; Changing units for domestic use. Test methods
EN 12221-2 : 2008+A1 : 2013 ; Child use and care articles. Changing units for domestic use. Test methods
EN 12222 : 1997 ; Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear.
EN 12223 : 2000 ; Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1 ;
EN 12226 : 2012 ; Geosynthetics. General tests for evaluation following durability testing.
EN 12227-1 : 1999 ; Playpens for domestic use. Safety requirements
EN 12227 : 2010 ; Playpens for domestic use. Safety requirements and test methods.
EN 12228 : 2013 ; Surfaces for sports areas. Determination of joint strength of synthetic surfaces.
EN 12229 : 2000 ; Surfaces for sports areas. Procedure for the preparation of synthetic turf and textile pieces.
EN 12229 : 2007 ; Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces.
EN 12229 : 2014 ; Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces.
EN 12234 : 2013 ; Surfaces for sports areas. Determination of ball roll behaviour.
EN 12235 : 2013 ; Surfaces for sports areas. Determination of vertical ball behaviour.
EN 12240 : 1997 ; Touch and close fasteners. Determination of the overall and effective widths of tapes and the effective width of a closure.
EN 12241 : 2000 ; Touch and close fasteners. Method for closure prior to washing and drying or dry cleaning.
EN 12242 : 2000 ; Touch and close fasteners. Determination of peel strength.
EN 12243 : 2000 ; Touch and close fasteners. Determination of dimensional change in washing and drying and dry cleaning.
EN 12244-1 : 1998 ; Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW. Safety
EN 12244-2 : 1998 ; Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW. Rational use of energy
EN 12245 : 2009+A1 : 2011 ; Transportable gas cylinders. Fully wrapped composite cylinders.
EN 12246 : 1999 ; Quality classification of timber used in pallets and packaging.
EN 12248 : 1999 ; Sawn timber used in industrial packaging. Permitted deviations and preferential sizes.
EN 12249 : 1999 ; Sawn timber used in pallets. Permitted deviations and guidelines for dimensions.
EN 12252 : 2000 ; Equipping of liquefied petroleum gas (LPG) road tankers.
EN 12252 : 2005+A1 : 2008 ; LPG equipment and accessories. Equipping of LPG road tankers.
EN 12252 : 2012 ; LPG equipment and accessories. Equipping of LPG road tankers.
EN 12252 : 2014 ; LPG equipment and accessories. Equipping of LPG road tankers.
EN 12254 : 1998+A2 : 2008 ; Screens for laser working places. Safety requirements and testing.
EN 12254 : 2010 ; Screens for laser working places. Safety requirements and testing.
EN 12255-5 : 1999 ; Wastewater treatment plants. Lagooning processes
EN 12255-10 : 2001 ; Wastewater treatment plants. Safety principles
EN 12255-11 : 2001 ; Wastewater treatment plants. General data required
EN 12255-16 : 2005 ; Wastewater treatment plants. Physical (mechanical) filtration
EN 12256 : 1998 ; Plastic piping systems. Thermoplastic fittings. Test method for mechanical strength or flexibility of fabricated fittings.
EN 12258-1 : 1998 ; Aluminium and aluminium alloys. Terms and definitions. General terms
EN 12258-1 : 2012 ; Aluminium and aluminium alloys. Terms and definitions. General terms
EN 12258-2 : 2004 ; Aluminium and aluminium alloys. Terms and definitions. Chemical analysis
EN 12258-4 : 2004 ; Aluminium and aluminium alloys. Terms and definitions. Residues of the aluminium industry
EN 12259-1 : 1999 ; Fixed firefighting systems. Components for sprinkler and water spray systems. Sprinklers
EN 12259-2 : 1999 ; Fixed firefighting systems. Components for sprinkler and water spray systems. Wet alarm valve assemblies
EN 12259-3 : 2000 ; Fixed firefighting systems. Components for sprinkler and water spray systems. Dry alarm valve assemblies
EN 12259-4 : 2000 ; Fixed firefighting systems. Components for sprinkler and water spray systems. Water motor alarms
EN 12262 : 1999 ; Rotodynamic pumps. Technical documents. Terms, delivery range, layout.
EN 12263 : 1999 ; Refrigerating systems and heat pumps. Safety switching devices for limiting the pressure. Requirements and tests.
EN 12264 : 2005 ; Health informatics. Categorial structures for systems of concepts.
EN 12266-1 : 2012 ; Industrial valves. Testing of metallic valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
EN 12266-2 : 2012 ; Industrial valves. Testing of metallic valves . Tests, test procedures and acceptance criteria. Supplementary requirements
EN 12268 : 2014 ; Food processing machinery. Band saw machines. Safety and hygiene requirements.
EN 12269-1 : 2000 ; Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the “beam test”. Short term test
EN 12269-2 : 2010 ; Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test. Long term test
EN 12270 : 1998 ; Mountaineering equipment. Chocks. Safety requirements and test methods.
EN 12270 : 2013 ; Mountaineering equipment. Chocks. Safety requirements and test methods.
EN 12274-7 : 2005 ; Slurry surfacing. Test methods. Shaking abrasion test
EN 12274-8 : 2005 ; Slurry surfacing. Test methods. Visual assessment of defects
EN 12275 : 1998 ; Mountaineering equipment. Connectors. Safety requirements and test methods.
EN 12275 : 2013 ; Mountaineering equipment. Connectors. Safety requirements and test methods.
EN 12276 : 1999 ; Mountaineering equipment. Frictional anchors. Safety requirements and test methods.
EN 12276 : 2013 ; Mountaineering equipment. Frictional anchors. Safety requirements and test methods.
EN 12277 : 1998 ; Mountaineering equipment. Harnesses. Safety requirements and test methods.
EN 12277 : 2007 ; Mountaineering equipment. Harnesses. Safety requirements and test methods.
EN 12277 : 2015 ; Mountaineering equipment. Harnesses. Safety requirements and test methods.
EN 12278 : 1998 ; Mountaineering equipment. Pulleys. Safety requirements and test methods.
EN 12278 : 2007 ; Mountaineering equipment. Pulleys. Safety requirements and test methods.
EN 12279 : 2000 ; Gas supply systems. Gas pressure regulating installations on service lines. Functional requirements.
EN 12280-1 : 1998 ; Rubber- or plastics-coated fabrics. Accelerated ageing tests. Heat ageing
EN 12285-2 : 2005 ; Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
EN 12286 : 1999 ; In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures.
EN 12287 : 1999 ; In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials.
EN 12288 : 2010 ; Industrial valves. Copper alloy gate valves.
EN 12289 : 2005 ; Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Determination of in-plane shear properties.
EN 12290 : 2005 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties.
EN 12293 : 2000 ; Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling.
EN 12294 : 2000 ; Plastic piping systems. Systems for hot and cold water. Test method for leaktightness under vacuum.
EN 12295 : 2000 ; Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method for resistance of joints to pressure cycling.
EN 12296 : 1998 ; Biotechnology. Equipment. Guidance on testing procedures for cleanability.
EN 12297 : 1998 ; Biotechnology. Equipment. Guidance on testing procedures for sterilizability.
EN 12298 : 1998 ; Biotechnology. Equipment. Guidance on testing procedures for leaktightness.
EN 12299 : 2009 ; Railway applications. Ride comfort for passengers. Measurement and evaluation.
EN 12300 : 1999 ; Cryogenic vessels. Cleanliness for cryogenic service.
EN 12301 : 2000+A1 : 2008 ; Plastics and rubber machines. Calenders. Safety requirements.
EN 12305 : 1998 ; Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified plants.
EN 12306 : 1998 ; Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination.
EN 12307 : 1998 ; Biotechnology. Large-scale process and production. Guidance for good practice, procedures, training and control for personnel.
EN 12308 : 1998 ; Installations and equipment for LNG. Suitability testing of gaskets designed for flanged joints used on LNG piping.
EN 12309-1 : 2000 ; Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Safety
EN 12309-1 : 2014 ; Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Terms and definitions
EN 12309-2 : 2000 ; Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Rational use of energy
EN 12309-2 : 2015 ; Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Safety
EN 12309-3 : 2014 ; Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Test conditions
EN 12309-4 : 2014 ; Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Test methods
EN 12309-5 : 2014 ; Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Requirements
EN 12309-6 : 2014 ; Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Calculation of seasonal performances
EN 12309-7 : 2014 ; Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Specific provisions for hybrid appliances
EN 12310-1 : 2000 ; Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Bitumen sheets for roof waterproofing
EN 12311-1 : 2000 ; Flexible sheets for waterproofing. Determination of tensile properties. Bitumen sheets for roof waterproofing
EN 12311-2 : 2010 ; Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing
EN 12311-2 : 2013 ; Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing
EN 12312-1 : 2013 ; Aircraft ground support equipment. Specific requirements. Passenger stairs
EN 12312-2 : 2014 ; Aircraft ground support equipment. Specific requirements. Catering vehicles
EN 12312-4 : 2014 ; Aircraft ground support equipment. Specific requirements. Passenger boarding bridges
EN 12312-5 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Aircraft fuelling equipment
EN 12312-7 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Air-craft movement equipment
EN 12312-8 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Maintenance stairs and platforms
EN 12312-9 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Container/Pallet loaders
EN 12312-9 : 2013 ; Aircraft ground support equipment. Specific requirements. Container/Pallet loaders
EN 12312-10 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Container/Pallet transfer transporters
EN 12312-11 : 2005 ; Aircraft ground support equipment. Specific requirements. Container/pallet dollies and loose load trailers
EN 12312-14 : 2006+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Disabled/incapacitated passenger boarding vehicles
EN 12312-14 : 2014 ; Aircraft ground support equipment. Specific requirements. Disabled/incapacitated passenger boarding vehicles
EN 12312-15 : 2006+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Baggage and equipment tractors
EN 12312-16 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Air start equipment
EN 12312-18 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Nitrogen or Oxygen units
EN 12312-19 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Aircraft jacks, axle jacks and hydraulic tail stanchions
EN 12312-20 : 2005+A1 : 2009 ; Aircraft ground support equipment. Specific requirements. Electrical ground power units
EN 12316-1 : 2000 ; Flexible sheets for waterproofing. Determination of peel resistance of joints. Bitumen sheets for roof waterproofing
EN 12316-2 : 2013 ; Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing
EN 12317-1 : 2000 ; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of shear resistance of joints
EN 12317-2 : 2010 ; Flexible sheets for waterproofing. Determination of shear resistance of joints. Plastic and rubber sheets for roof waterproofing
EN 12320 : 2001 ; Building hardware. Padlocks and padlock fittings. Requirements and test methods.
EN 12320 : 2012 ; Building hardware. Padlocks and padlock fittings. Requirements and test methods.
EN 12322 : 1999 ; In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media.
EN 12323 : 1998 ; Bar coding. Symbology specifications. “Code 16K”.
EN 12323 : 2005 ; AIDC technologies. Symbology specifications. Code 16K.
EN 12324-1 : 1999 ; Irrigation techniques. Reel machine systems. Size series
EN 12324-2 : 1999 ; Irrigation techniques. Reel machine systems. Specifications of polyethylene tubes for reel machines
EN 12324-3 : 1999 ; Irrigation techniques. Reel machine systems. Presentation of technical characteristics
EN 12324-4 : 1999 ; Irrigation techniques. Reel machine systems. Check list of users requirements
EN 12325-1 : 1999 ; Irrigation techniques. Centre pivot and moving lateral systems. Presentation of the technical characteristics
EN 12325-2 : 1999 ; Irrigation techniques. Centre pivot and moving lateral systems. Minimum performances and technical characteristics
EN 12325-3 : 1999 ; Irrigation techniques. Centre pivot and moving lateral systems. Terminology and classification
EN 12326-1 : 2014 ; Slate and stone for discontinuous roofing and external cladding. Specifications for slate and carbonate slate
EN 12326-2 : 2000 ; Slate and stone products for discontinuous roofing and cladding. Methods of test
EN 12326-2 : 2011 ; Slate and stone for discontinuous roofing and external cladding. Methods of test for slate and carbonate slate
EN 12327 : 2000 ; Gas supply systems. Pressure testing, commissioning and decommissioning procedures. Functional requirements.
EN 12327 : 2012 ; Gas infrastructure. Pressure testing, commissioning and decommissioning procedures. Functional requirements.
EN 12329 : 2000 ; Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel.
EN 12330 : 2000 ; Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel.
EN 12331 : 2003+A2 : 2010 ; Food processing machinery. Mincing machines. Safety and hygiene requirements.
EN 12331 : 2015 ; Food processing machinery. Mincing machines. Safety and hygiene requirements.
EN 12332-1 : 1999 ; Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel ball method
EN 12334 : 2001 ; Industrial valves. Cast iron check valves.
EN 12336 : 2005+A1 : 2008 ; Tunnelling machines. Shield machines, thrust boring machines, auger boring machines, lining erection equipment. Safety requirements.
EN 12337-1 : 2000 ; Glass in building. Chemically strengthened soda lime silicate glass. Definition and description
EN 12338 : 1998 ; Water quality. Determination of mercury. Enrichment methods by amalgamation.
EN 12341 : 1999 ; Air quality. Determination of the PM10 fraction of suspended particulate matter. Reference method and field test procedure to demonstrate reference equivalence of measurement methods.
EN 12341 : 2014 ; Ambient air. Standard gravimetric measurement method for the determination of the PM$d1$d0 or PM$d2$d,$d5 mass concentration of suspended particulate matter.
EN 12342 : 1998+A1 : 2009 ; Breathing tubes intended for use with anaesthetic apparatus and ventilators.
EN 12345 : 1999 ; Welding. Multilingual terms for welded joints with illustrations.
EN 12346 : 1999 ; Gymnastic equipment. Wall bars, lattice ladders and climbing frames. Safety requirements and test methods.
EN 12347 : 1998 ; Biotechnology. Performance criteria for steam sterilizers and autoclaves.
EN 12348 : 2000+A1 : 2009 ; Core drilling machines on stand. Safety.
EN 12350-4 : 2000 ; Testing fresh concrete. Degree of compactability
EN 12350-4 : 2009 ; Testing fresh concrete. Degree of compactability
EN 12350-7 : 2000 ; Testing fresh concrete. Air content. Pressure methods
EN 12350-7 : 2009 ; Testing fresh concrete. Air content. Pressure methods
EN 12350-8 : 2010 ; Testing fresh concrete. Self-compacting concrete. Slump-flow test
EN 12350-9 : 2010 ; Testing fresh concrete. Self-compacting concrete. V-funnel test
EN 12350-10 : 2010 ; Testing fresh concrete. Self-compacting concrete. L box test
EN 12350-11 : 2010 ; Testing fresh concrete. Self-compacting concrete. Sieve segregation test
EN 12350-12 : 2010 ; Testing fresh concrete. Self-compacting concrete. J-ring test
EN 12351 : 1999 ; Industrial valves. Protective caps for valves with flanged connections.
EN 12351 : 2010 ; Industrial valves. Protective caps for valves with flanged connections.
EN 12352 : 2000 ; Traffic control equipment. Warning and safety light devices.
EN 12352 : 2006 ; Traffic control equipment. Warning and safety light devices.
EN 12353 : 2000 ; Chemical disinfectants and antiseptics. Preservation of microbial strains used for the determination of bactericidal and fungicidal activity.
EN 12353 : 2006 ; Chemical disinfectants and antiseptics. Preservation of test organisms used for the determination of bactericidal, sporicidal and fungicidal activity.
EN 12353 : 2013 ; Chemical disinfectants and antiseptics. Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity.
EN 12354-1 : 2000 ; Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insulation between rooms
EN 12354-2 : 2000 ; Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Impact sound insulation between rooms
EN 12354-3 : 2000 ; Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insulation against outdoor sound
EN 12354-5 : 2009 ; Building acoustics. Estimation of acoustic performance of building from the performance of elements. Sounds levels due to the service equipment
EN 12369-1 : 2001 ; Wood-based panels. Characteristic values for structural design. OSB, particleboards and fireboards
EN 12369-2 : 2011 ; Wood-based panels. Characteristic values for structural design. Plywood
EN 12369-3 : 2008 ; Wood-based panels. Characteristic values for structural design. Solid-wood panels
EN 12370 : 1999 ; Natural stone test methods. Determination of resistance to salt crystallization.
EN 12371 : 2010 ; Natural stone test methods. Determination of frost resistance.
EN 12372 : 1999 ; Natural stone test methods. Determination of flexural strength under concentrated load.
EN 12372 : 2006 ; Natural stone test methods. Determination of flexural strength under concentrated load.
EN 12373-2 : 1999 ; Aluminium and aluminium alloys. Anodizing. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
EN 12373-3 : 1999 ; Aluminium and aluminium alloys. Anodizing. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
EN 12373-4 : 1998 ; Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
EN 12373-5 : 1999 ; Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
EN 12373-6 : 1999 ; Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
EN 12373-7 : 1999 ; Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
EN 12373-7 : 2002 ; Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
EN 12373-8 : 1999 ; Aluminium and aluminium alloys. Anodizing. Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
EN 12373-9 : 1999 ; Aluminium and aluminium alloys. Anodizing. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
EN 12373-10 : 1999 ; Aluminium and aluminium alloys. Anodizing. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
EN 12373-11 : 2001 ; Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20^D, 45^D, 60^D, and 85^D
EN 12373-12 : 2001 ; Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
EN 12373-13 : 2001 ; Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
EN 12373-14 : 2001 ; Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
EN 12373-15 : 2001 ; Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
EN 12375 : 1998 ; Packaging. Flexible aluminium tubes. Wall thickness determination method.
EN 12375 : 2009 ; Packaging. Flexible aluminium tubes. Wall thickness determination method.
EN 12376 : 1999 ; In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology.
EN 12377 : 1999 ; Packaging. Flexible tubes. Test method for the airtightness of closures.
EN 12377 : 2014 ; Packaging. Flexible tubes. Test method for the air tightness of closures.
EN 12381 : 2005 ; Health informatics. Time standards for healthcare specific problems.
EN 12384 : 1999 ; Copper and copper alloys. Determination of spring bending limit on strip.
EN 12386 : 1999 ; Chemicals used for treatment of water intended for human consumption. Copper sulfate.
EN 12386 : 2005 ; Chemicals used for treatment of water intended for human consumption. Copper sulfate.
EN 12386 : 2012 ; Chemicals used for treatment of water intended for human consumption. Copper sulfate.
EN 12387 : 2005+A1 : 2009 ; Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements.
EN 12390-1 : 2000 ; Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
EN 12390-1 : 2012 ; Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
EN 12390-2 : 2000 ; Testing hardened concrete. Making and curing specimens for strength tests
EN 12390-2 : 2009 ; Testing hardened concrete. Making and curing specimens for strength tests
EN 12390-3 : 2009 ; Testing hardened concrete. Compressive strength of test specimens
EN 12390-4 : 2000 ; Testing hardened concrete. Compressive strength. Specification for testing machines
EN 12390-5 : 2000 ; Testing hardened concrete. Flexural strength of test specimens
EN 12390-5 : 2009 ; Testing hardened concrete. Flexural strength of test specimens
EN 12390-6 : 2009 ; Testing hardened concrete. Tensile splitting strength of test specimens
EN 12390-7 : 2000 ; Testing hardened concrete. Density of hardened concrete
EN 12390-7 : 2009 ; Testing hardened concrete. Density of hardened concrete
EN 12390-8 : 2000 ; Testing hardened concrete. Depth of penetration of water under pressure
EN 12390-8 : 2009 ; Testing hardened concrete. Depth of penetration of water under pressure
EN 12390-11 : 2015 ; Testing hardened concrete. Determination of the chloride resistance of concrete, unidirectional diffusion
EN 12390-13 : 2013 ; Testing hardened concrete. Determination of secant modulus of elasticity in compression
EN 12392 : 2000 ; Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment.
EN 12392 : 2016 ; Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment.
EN 12393-1 : 1999 ; Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. General considerations
EN 12393-1 : 2008 ; Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. General considerations
EN 12393-1 : 2013 ; Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. General considerations
EN 12393-2 : 1999 ; Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Methods for extraction and clean-up
EN 12393-2 : 2008 ; Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Methods for extraction and clean-up
EN 12393-2 : 2013 ; Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Methods for extraction and clean-up
EN 12393-3 : 1999 ; Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests
EN 12393-3 : 2008 ; Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests
EN 12393-3 : 2013 ; Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Determination and confirmatory tests
EN 12396-1 : 1999 ; Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Spectrometric method
EN 12396-2 : 1999 ; Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Gas chromatographic method
EN 12396-3 : 2000 ; Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. UV spectrometric xanthogenate method
EN 12402 : 1999 ; Lead and lead alloys. Methods of sampling for analysis.
EN 12405-1 : 2005+A2 : 2010 ; Gas meters. Conversion devices. Volume conversion
EN 12405-2 : 2012 ; Gas meters. Conversion devices. Energy conversion
EN 12406 : 1999 ; Swap bodies. Thermal swap bodies of class C. Dimensions and general requirements.
EN 12407 : 2000 ; Natural stone test methods. Petrographic examination.
EN 12407 : 2007 ; Natural stone test methods. Petrographic examination.
EN 12409 : 1999 ; Rubber and plastics machines. Thermoforming machines. Safety requirements.
EN 12409 : 2008+A1 : 2011 ; Plastics and rubber machines. Thermoforming machines. Safety requirements.
EN 12410 : 1999 ; Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements.
EN 12413 : 1999 ; Safety requirements for bonded abrasive products.
EN 12413 : 2007+A1 : 2011 ; Safety requirements for bonded abrasive products.
EN 12414 : 1999 ; Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements.
EN 12415 : 2001 ; Safety of machine tools. Small numerically controlled turning machines and turning centres.
EN 12418 : 2000+A1 : 2009 ; Masonry and stone cutting-off machines for job site. Safety.
EN 12419 : 1999 ; Respiratory protective devices. Light duty construction compressed airline breathing apparatus incorporating a full face mask, half mask or quarter mask. Requirements, testing, marking.
EN 12421 : 1998 ; Magnesium and magnesium alloys. Unalloyed magnesium.
EN 12427 : 2000 ; Industrial, commercial and garage doors and gates. Air permeability. Test method.
EN 12428 : 2013 ; Industrial, commercial and garage doors. Thermal transmittance. Requirements for the calculation.
EN 12429 : 1998 ; Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions.
EN 12430 : 1998 ; Thermal insulating products for building applications. Determination of behaviour under point load.
EN 12430 : 2013 ; Thermal insulating products for building applications. Determination of behaviour under point load.
EN 12431 : 1998 ; Thermal insulating products for building applications. Determination of thickness for floating floor insulating products.
EN 12431 : 2013 ; Thermal insulating products for building applications. Determination of thickness for floating floor insulating products.
EN 12432 : 1998 ; Gymnastic equipment. Balancing beams. Functional and safety requirements, test methods.
EN 12433-1 : 2000 ; Industrial, commercial, and garage doors and gates. Terminology. Types of doors
EN 12433-2 : 2000 ; Industrial, commercial, and garage doors and gates. Terminology. Parts of doors
EN 12434 : 2000 ; Cryogenic vessels. Cryogenic flexible hoses.
EN 12435 : 2006 ; Health informatics. Expression of results of measurements in health sciences.
EN 12438 : 1998 ; Magnesium and magnesium alloys. Magnesium alloys for cast anodes.
EN 12441-7 : 2004 ; Zinc and zinc alloys. Chemical analysis. Determination of tin. Flame atomic absorption spectrometric method after extraction
EN 12441-8 : 2004 ; Zinc and zinc alloys. Chemical analysis. Detection of tin in secondary zinc. Flame atomic absorption spectrometric method
EN 12441-9 : 2004 ; Zinc and zinc alloys. Chemical analysis. Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method
EN 12441-10 : 2004 ; Zinc and zinc alloys. Chemical analysis. Determination of chromium and titanium in zinc alloys. Spectrophotometric method
EN 12441-11 : 2006 ; Zinc and zinc alloys. Chemical analysis. Determination of silicon in zinc alloys. Spectrophotometric method
EN 12444 : 2001 ; Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation.
EN 12445 : 2001 ; Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods.
EN 12446 : 2011 ; Chimneys. Components. Concrete outer wall elements.
EN 12449 : 1999 ; Copper and copper alloys. Seamless, round tubes for general purposes.
EN 12449 : 2012 ; Copper and copper alloys. Seamless, round tubes for general purposes.
EN 12449 : 2016 ; Copper and copper alloys. Seamless, round tubes for general purposes.
EN 12450 : 1999 ; Copper and copper alloys. Seamless, round copper capillary tubes.
EN 12450 : 2012 ; Copper and copper alloys. Seamless, round copper capillary tubes.
EN 12451 : 1999 ; Copper and copper alloys. Seamless, round tubes for heat exchangers.
EN 12451 : 2012 ; Copper and copper alloys. Seamless, round tubes for heat exchangers.
EN 12452 : 1999 ; Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers.
EN 12452 : 2012 ; Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers.
EN 12453 : 2001 ; Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements.
EN 12454 : 1998 ; Founding. Visual examination of surface discontinuities. Steel sand castings.
EN 12455 : 1999 ; Resilient floor coverings. Specification for corkment underlay.
EN 12458 : 1999 ; Surface active agents. Determination of stability in hard water.
EN 12460 : 1998 ; Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk.
EN 12461 : 1998 ; Biotechnology. Large-scale process and production. Guidance for the handling, inactivating and testing of waste.
EN 12462 : 1998 ; Biotechnology. Performance criteria for pumps.
EN 12463 : 2014 ; Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements.
EN 12464-1 : 2011 ; Light and lighting. Lighting of work places. Indoor work places
EN 12464-2 : 2007 ; Lighting of work places. Outdoor work places
EN 12464-2 : 2014 ; Light and lighting. Lighting of work places. Outdoor work places
EN 12467 : 2000 ; Fibre-cement flat sheets. Product specifications and test methods.
EN 12467 : 2012+A1 : 2016 ; Fibre-cement flat sheets. Product specification and test methods.
EN 12468 : 1998 ; Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate releases of genetically modified plants.
EN 12469 : 2000 ; Biotechnology. Performance criteria for microbiological safety cabinets.
EN 12470-1 : 2000+A1 : 2009 ; Clinical thermometers. Metallic liquid-in-glass thermometers with maximum device
EN 12470-2 : 2000+A1 : 2009 ; Clinical thermometers. Phase change type (dot matrix) thermometers
EN 12470-3 : 2000+A1 : 2009 ; Clinical thermometers. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
EN 12472 : 1999 ; Method for the simulation of wear and corrosion for the detection of nickel release from coated items.
EN 12472 : 2005+A1 : 2009 ; Method for the simulation of wear and corrosion for the detection of nickel release from coated items.
EN 12473 : 2000 ; General principles of cathodic protection in sea water.
EN 12473 : 2014 ; General principles of cathodic protection in seawater.
EN 12475-1 : 1998 ; Classification of dense shaped refractory products. Alumina-silica products
EN 12475-2 : 1998 ; Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon
EN 12475-3 : 1998 ; Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon
EN 12475-4 : 1999 ; Classification of dense shaped refractory products. Special products
EN 12478 : 2001 ; Safety of machine tools. Large numerically controlled turning machines and turning centres.
EN 12480 : 2015 ; Gas meters. Rotary displacement gas meters.
EN 12482-1 : 1998 ; Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for hot rolled reroll stock
EN 12482-2 : 1998 ; Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for cold rolled reroll stock
EN 12483 : 1999 ; Liquid pumps. Pump units with frequency inverters. Guarantee and compatibility tests.
EN 12484-1 : 1999 ; Irrigation techniques. Automatic turf irrigation systems. Definition of the programme of equipment by the owner
EN 12484-2 : 2000 ; Irrigation techniques. Automatic turf irrigation systems. Design and definition of typical technical templates
EN 12484-3 : 2000 ; Irrigation techniques. Automatic turf irrigation systems. Automatic control and system management
EN 12485 : 2010 ; Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide and calcium magnesium carbonate. Test methods.
EN 12487 : 2007 ; Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys.
EN 12488 : 2016 ; Glass in building. Glazing recommendations. Assembly principles for vertical and sloping glazing.
EN 12490 : 1999 ; Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood.
EN 12490 : 2010 ; Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood.
EN 12491 : 2001 ; Paragliding equipment. Emergency parachutes. Safety requirements and test methods.
EN 12491 : 2015 ; Paragliding equipment. Emergency parachutes. Safety requirements and test methods.
EN 12492 : 2000 ; Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods.
EN 12492 : 2012 ; Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods.
EN 12493 : 2008+A1 : 2012 ; LPG equipment and accessories. Welded steel tanks for liquefied petroleum gas (LPG). Road tankers design and manufacture.
EN 12493 : 2013+A1 : 2014 ; LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture.
EN 12495 : 2000 ; Cathodic protection for fixed steel offshore structures.
EN 12496 : 2013 ; Galvanic anodes for cathodic protection in seawater and saline mud.
EN 12497 : 2005 ; Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of mercury in an aqueous extract.
EN 12498 : 2005 ; Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of cadmium and lead in an aqueous extract.
EN 12500 : 2000 ; Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric environments.
EN 12502-1 : 2004 ; Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. General
EN 12502-2 : 2004 ; Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for copper and copper alloys
EN 12502-3 : 2004 ; Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for hot dip galvanised ferrous materials
EN 12502-4 : 2004 ; Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for stainless steels
EN 12502-5 : 2004 ; Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for cast iron, unalloyed and low alloyed steels
EN 12503-1 : 2013 ; Sports mats. Gymnastic mats, safety requirements
EN 12503-2 : 2016 ; Sports mats. Pole vault and high jump mats, safety requirements
EN 12503-4 : 2013 ; Sports mats. Determination of shock absorption
EN 12503-4 : 2016 ; Sports mats. Determination of shock absorption
EN 12503-7 : 2001 ; Sports mats. Determination of static stiffness
EN 12504-1 : 2000 ; Testing concrete in structures. Cored specimens. Taking, examining and testing in compression
EN 12504-1 : 2009 ; Testing concrete in structures. Cored specimens. Taking, examining and testing in compression
EN 12504-2 : 2012 ; Testing concrete in structures. Non-destructive testing. Determination of rebound number
EN 12504-3 : 2005 ; Testing concrete in structures. Determination of pull-out force
EN 12505 : 2000+A1 : 2009 ; Food processing machinery. Centrifugal machines for processing edible oils and fats. Safety and hygiene requirements.
EN 12507 : 2000 ; Transportation services. Guidance notes on the application of EN ISO 9002 to the road transport, storage and distribution industries.
EN 12507 : 2005 ; Transportation services. Guidance notes on the application of EN ISO 9001 : 2000 to the road transportation, storage, distribution and railway goods industries.
EN 12508 : 2000 ; Corrosion protection of metals and alloys. Surface treatment, metallic and other inorganic coatings. Vocabulary.
EN 12514-1 : 2000 ; Installations for oil supply systems for oil burners. Safety requirements and tests. Parts, oil feed pumps, control and safety devices, supply tanks
EN 12514-2 : 2000 ; Installations for oil supply systems for oil burners. Safety requirements and tests. Parts, valves, pipes, filters, oil de-aerators, meters
EN 12515 : 1997 ; Hot environments. Analytical determination and interpretation of thermal stress using calculation of required sweat rate.
EN 12516-1 : 2005 ; Industrial valves. Shell design strength. Tabulation method for steel valve shells
EN 12516-1 : 2014 ; Industrial valves. Shell design strength. Tabulation method for steel valve shells
EN 12516-2 : 2014 ; Industrial valves. Shell design strength. Calculation method for steel valve shells
EN 12516-4 : 2008 ; Industrial valves. Shell design strength. Calculation method for valve shells manufactured in metallic materials other than steel
EN 12516-4 : 2014 ; Industrial valves. Shell design strength. Calculation method for valve shells manufactured in metallic materials other than steel
EN 12517-1 : 2006 ; Non-destructive testing of welds. Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography. Acceptance levels
EN 12517-2 : 2008 ; Non-destructive testing of welds. Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels
EN 12517 : 1998 ; Non-destructive testing of welds. Radiographic testing of welded joints. Acceptance levels.
EN 12518 : 2008 ; Chemicals used for treatment of water intended for human consumption. High-calcium lime.
EN 12518 : 2014 ; Chemicals used for treatment of water intended for human consumption. High-calcium lime.
EN 12520 : 2010 ; Furniture. Strength, durability and safety. Requirements for domestic seating.
EN 12520 : 2015 ; Furniture. Strength, durability and safety. Requirements for domestic seating.
EN 12521 : 2009 ; Furniture. Strength, durability and safety. Requirements for domestic tables.
EN 12521 : 2015 ; Furniture. Strength, durability and safety. Requirements for domestic tables.
EN 12522-1 : 1998 ; Furniture removal activities. Furniture removal for private individuals. Service specification
EN 12522-2 : 1998 ; Furniture removal activities. Furniture removal for private individuals. Provision of service
EN 12523 : 1999 ; External limb prostheses and external orthoses. Requirements and test methods.
EN 12524 : 2000 ; Building materials and products. Hygrothermal properties. Tabulated design values.
EN 12525 : 2000+A2 : 2010 ; Agricultural machinery. Front loaders. Safety.
EN 12526 : 1999 ; Castors and wheels. Vocabulary, recommended symbols and multilingual dictionary.
EN 12527 : 1999 ; Castors and wheels. Test methods and apparatus.
EN 12528 : 1999 ; Castors and wheels. Castors for furniture. Requirements.
EN 12529 : 1999 ; Castors and wheels. Castors for furniture. Castors for swivel chairs. Requirements.
EN 12530 : 1999 ; Castors and wheels. Castors and wheels for manually propelled institutional applications.
EN 12532 : 1999 ; Castors and wheels. Castors and wheels for applications up to 1,1 m/s (4 km/h).
EN 12533 : 1999 ; Castors and wheels. Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h).
EN 12534 : 1999 ; Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels. Classification.
EN 12535 : 2000 ; Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of high strength steels. Classification.
EN 12536 : 2000 ; Welding consumables. Rods for gas welding of non alloy and creep-resisting steels. Classification.
EN 12540 : 2000 ; Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium.
EN 12542 : 2010 ; LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m$u3 ; Design and manufacture.
EN 12543-1 : 1999 ; Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Scanning method
EN 12543-2 : 1999 ; Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Pinhole camera radiographic method
EN 12543-2 : 2008 ; Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Pinhole camera radiographic method
EN 12543-3 : 1999 ; Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Slit camera radiographic method
EN 12543-4 : 1999 ; Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Edge method
EN 12543-5 : 1999 ; Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Measurement of the effective focal spot size of mini and micro focus X-ray tubes
EN 12544-1 : 1999 ; Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Voltage divider method
EN 12544-2 : 2000 ; Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Constancy check by the thick filter method
EN 12544-3 : 1999 ; Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Spectrometric method
EN 12545 : 2000+A1 : 2009 ; Footwear, leather and imitation leather goods manufacturing machines. Noise test code. Common requirements.
EN 12546-1 : 2000 ; Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for vacuum ware, insulated flasks and jugs
EN 12546-2 : 2000 ; Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for insulated bags and boxes
EN 12546-3 : 2000 ; Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for thermal packs
EN 12547 : 1999+A1 : 2009 ; Centrifuges. Common safety requirements.
EN 12548 : 1999 ; Lead and alloys. Lead alloy ingots for electric cable sheathing and for sleeves.
EN 12549 : 1999+A1 : 2008 ; Acoustics. Noise test code for fastener driving tools. Engineering method.
EN 12560-1 : 2001 ; Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic flat gaskets with or without inserts
EN 12560-2 : 2001 ; Flanges and their joints. Gaskets for Class-designated flanges. Spiral wound gaskets for use with steel flanges
EN 12560-2 : 2013 ; Flanges and their joints. Dimensions of gaskets for Class-designated flanges. Spiral wound gaskets for use with steel flanges
EN 12560-3 : 2001 ; Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic PTFE envelope gaskets
EN 12560-4 : 2001 ; Flanges and their joints. Gaskets for Class-designated flanges. Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
EN 12560-5 : 2001 ; Flanges and their joints. Gaskets for Class-designated flanges. Metallic ring joint gaskets for use with steel flanges
EN 12561-1 : 1999 ; Railway applications. Tank wagons. Marking of tank wagons for the carriage of dangerous goods
EN 12561-1 : 2011 ; Railway applications. Tank wagons. Identification plates for tank wagons for the carriage of dangerous goods
EN 12561-2 : 2011 ; Railway applications. Tank wagons. Bottom emptying devices for liquid products including vapour return
EN 12561-3 : 2011 ; Railway applications. Tank wagons. Bottom filling and emptying devices for gases liquefied under pressure
EN 12561-4 : 2011 ; Railway applications. Tank wagons. Devices for top filling and emptying of liquid products
EN 12561-5 : 2011 ; Railway applications. Tank wagons. Devices for vapour return while filling or emptying of liquid products
EN 12561-6 : 2011 ; Railway applications. Tank wagons. Manholes
EN 12561-7 : 2011 ; Railway applications. Tank wagons. Platforms and ladders
EN 12561-8 : 2011 ; Railway applications. Tank wagons. Heating connections
EN 12562 : 1999 ; Textiles. Para-aramid multifilament yarns. Test methods.
EN 12563 : 1999 ; Non-active surgical implants. Joint replacement implants. Specific requirements for hip joint replacement implants.
EN 12564 : 1999 ; Non-active surgical implants. Joint replacement implants. Specific requirements for knee joint replacement implants.
EN 12566-1 : 2000 ; Small wastewater treatment systems for up to 50 PT. Prefabricated septic tanks
EN 12566-1 : 2016 ; Small wastewater treatment systems for up to 50 PT. Prefabricated septic tanks
EN 12566-3 : 2005+A2 : 2013 ; Small wastewater treatment systems for up to 50 PT. Packaged and/or site assembled domestic wastewater treatment plants
EN 12566-3 : 2016 ; Small wastewater treatment systems for up to 50 PT. Packaged and/or site assembled domestic wastewater treatment plants
EN 12566-4 : 2007 ; Small wastewater treatment systems for up to 50 PT. Septic tanks assembled in situ from prefabricated kits
EN 12566-4 : 2016 ; Small wastewater treatment systems for up to 50 PT. Septic tanks assembled in situ from prefabricated kits
EN 12566-6 : 2013 ; Small wastewater treatment systems for up to 50 PT. Prefabricated treatment units for septic tank effluent
EN 12566-6 : 2016 ; Small wastewater treatment systems for up to 50 PT. Prefabricated treatment units for septic tank effluent
EN 12566-7 : 2013 ; Small wastewater treatment systems for up to 50 PT. Prefabricated tertiary treatment units
EN 12566-7 : 2016 ; Small wastewater treatment systems for up to 50 PT. Prefabricated tertiary treatment units
EN 12567 : 2000 ; Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests.
EN 12568 : 1998 ; Foot and leg protectors. Requirements and test methods for toecaps and metal penetration resistant inserts.
EN 12568 : 2010 ; Foot and leg protectors. Requirements and test methods for toecaps and penetration resistant inserts.
EN 12569 : 1999 ; Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests.
EN 12570 : 2000 ; Industrial valves. Method for sizing the operating element.
EN 12571 : 1999 ; Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing.
EN 12572-1 : 2007 ; Artificial climbing structures. Safety requirements and test methods for ACS with protection points
EN 12572-2 : 2008 ; Artificial climbing structures. Safety requirements and test methods for bouldering walls
EN 12572-3 : 2008 ; Artificial climbing structures. Safety requirements and test methods for climbing holds
EN 12572 : 1999 ; Artificial climbing structures. Protection points, stability requirements and test methods.
EN 12574-1 : 2006 ; Stationary waste containers. Containers with a capacity up to 10000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device. Dimensions and design
EN 12574-2 : 2006 ; Stationary waste containers. Performance requirements and test methods
EN 12574-3 : 2006 ; Stationary waste containers. Safety and health requirements
EN 12575 : 1998 ; Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC.
EN 12576 : 1998 ; Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC.
EN 12579 : 2000 ; Soil improvers and growing media. Sampling.
EN 12579 : 2013 ; Soil improvers and growing media. Sampling.
EN 12580 : 2000 ; Soil improvers and growing media. Determination of a quantity.
EN 12580 : 2013 ; Soil improvers and growing media. Determination of a quantity.
EN 12581 : 2005+A1 : 2010 ; Coating plants. Machinery for dip coating and electrodeposition of organic liquid coating material. Safety requirements.
EN 12582 : 1999 ; Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD.
EN 12583 : 2014 ; Gas Infrastructure. Compressor stations. Functional requirements.
EN 12584 : 1999 ; Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts. Terminology.
EN 12585 : 1999 ; Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to 1000 ; Compatibility and interchangeability.
EN 12586 : 1999 ; Child care articles. Soother holder. Safety requirements and test methods.
EN 12586 : 2007+A1 : 2011 ; Child use and care articles. Soother holder. Safety requirements and test methods.
EN 12588 : 1999 ; Lead and lead alloys. Rolled lead sheet for building purposes.
EN 12588 : 2006 ; Lead and lead alloys. Rolled lead sheet for building purposes.
EN 12590 : 2000 ; Textiles. Industrial sewing threads made wholly or partly form synthetic fibres.
EN 12591 : 2000 ; Bitumen and bituminous binders. Specifications for paving grade bitumens.
EN 12591 : 2009 ; Bitumen and bituminous binders. Specifications for paving grade bitumens.
EN 12592 : 2000 ; Methods of test for petroleum and its products. BS 2000-47 ; Bitumen and bituminous binders. Determination of solubility.
EN 12592 : 2007 ; Bitumen and bituminous binders. Determination of solubility.
EN 12592 : 2014 ; Bitumen and bituminous binders. Determination of solubility.
EN 12593 : 2000 ; Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the Fraass breaking point.
EN 12593 : 2007 ; Bitumen and bituminous binders. Determination of the Fraass breaking point.
EN 12593 : 2015 ; Bitumen and bituminous binders. Determination of the Fraass breaking point.
EN 12594 : 2000 ; Methods of test for petroleum and its products. Bitumen and bituminous binders. Preparation of test samples.
EN 12594 : 2007 ; Bitumen and bituminous binders. Preparation of test samples.
EN 12594 : 2014 ; Bitumen and bituminous binders. Preparation of test samples.
EN 12595 : 2000 ; Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of kinematic viscosity.
EN 12595 : 2007 ; Bitumen and bituminous binders. Determination of kinematic viscosity.
EN 12595 : 2014 ; Bitumen and bituminous binders. Determination of kinematic viscosity.
EN 12596 : 2000 ; Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary.
EN 12596 : 2007 ; Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary.
EN 12596 : 2014 ; Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary.
EN 12597 : 2000 ; Bitumen and bituminous binders. Terminology.
EN 12597 : 2014 ; Bitumen and bituminous binders. Terminology.
EN 12598 : 1999 ; Oxygen monitors for patient breathing mixtures. Particular requirements.
EN 12599 : 2000 ; Ventilation for buildings. Tests procedures and measuring methods for handing over installed ventilation and air conditioning systems.
EN 12599 : 2012 ; Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems.
EN 12601 : 2001 ; Reciprocating internal combustion engine driven generating sets. Safety.
EN 12601 : 2010 ; Reciprocating internal combustion engine driven generating sets. Safety.
EN 12602 : 2008+A1 : 2013 ; Prefabricated reinforced components of autoclaved aerated concrete.
EN 12602 : 2016 ; Prefabricated reinforced components of autoclaved aerated concrete.
EN 12604 : 2000 ; Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements.
EN 12605 : 2000 ; Industrial, commercial and garage doors and gates. Mechanical aspects. Test methods.
EN 12606-1 : 2000 ; Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
EN 12606-1 : 2007 ; Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
EN 12606-2 : 2000 ; Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by extraction
EN 12607-1 : 2000 ; Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RTFOT method
EN 12607-1 : 2007 ; Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RTFOT method
EN 12607-1 : 2014 ; Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RTFOT method
EN 12607-2 : 2000 ; Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. TFOT Method
EN 12607-2 : 2007 ; Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. TFOT Method
EN 12607-2 : 2014 ; Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. TFOT method
EN 12607-3 : 2000 ; Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RFT Method
EN 12607-3 : 2007 ; Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RFT Method
EN 12607-3 : 2014 ; Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RFT method
EN 12608-1 : 2016 ; Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods. Non-coated PVC-U profiles with light coloured surfaces
EN 12613 : 2009 ; Plastics warning devices for underground cables and pipelines with visual characteristics.
EN 12615 : 1999 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength.
EN 12616 : 2013 ; Surfaces for sports areas. Determination of water infiltration rate.
EN 12617-2 : 2004 ; Products and systems for the protection and repair of concrete structures. Test methods. Shrinkage of crack injection products based on polymer binder : volumetric shrinkage
EN 12618-2 : 2004 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. Adhesion by tensile bond strength
EN 12618-3 : 2004 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method
EN 12619 : 1999 ; Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases. Continuous flame ionization detector method.
EN 12619 : 2013 ; Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method.
EN 12621 : 2006+A1 : 2010 ; Machinery for the supply and circulation of coating materials under pressure. Safety requirements.
EN 12622 : 2009+A1 : 2013 ; Safety of machine tools. Hydraulic press brakes.
EN 12625-3 : 1999 ; Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density
EN 12625-4 : 1999 ; Tissue paper and tissue products. Determination of tensile strength, stretch at break and tensile energy absorption
EN 12625-5 : 1999 ; Tissue paper and tissue products. Determination of wet tensile strength
EN 12625-6 : 1999 ; Tissue paper and tissue products. Determination of grammage
EN 12625-7 : 2000 ; Tissue paper and tissue products. Determination of optical properties
EN 12626 : 1997 ; Safety of machinery. Laser processing machines. Safety requirements.
EN 12627 : 1999 ; Industrial valves. Butt welding ends for steel valves.
EN 12628 : 1999 ; Diving accessories. Combined buoyancy and rescue devices. Functional and safety requirements, test methods.
EN 12629-1 : 2000+A1 : 2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Common requirements
EN 12629-4 : 2001+A1 : 2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete roof tile making machines
EN 12629-6 : 2004+A1 : 2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for the manufacture of precast reinforced products
EN 12630 : 1999 ; Fruit and vegetable juices. Determination of glucose, fructose, sorbitol and sucrose contents. Method using high-performance liquid chromatography.
EN 12631 : 1999 ; Fruit and vegetable juices. Enzymatic determination of D- and L-lactic acid (lactate) content. NAD spectrometric method.
EN 12632 : 1999 ; Fruit and vegetable juices. Enzymatic determination of acetic acid (acetate) content. NAD spectrometric method.
EN 12634 : 1998 ; Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method.
EN 12636 : 1999 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete.
EN 12639 : 2000 ; Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy.
EN 12640 : 2001 ; Securing of cargo on road vehicles. Lashing points on commercial vehicles for goods transportation. Minimum requirements and testing.
EN 12641-1 : 2005 ; Swap bodies and commercial vehicles. Tarpaulins. Minimum requirements
EN 12641-2 : 2006 ; Swap bodies and commercial vehicles. Tarpaulins. Minimum requirements for curtainsiders
EN 12642 : 2006 ; Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements.
EN 12642 : 2016 ; Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements.
EN 12643 : 1997+A1 : 2008 ; Earth-moving machinery. Rubber-tyred machines. Steering requirements.
EN 12643 : 2014 ; Earth-moving machinery. Rubber-tyred machines. Steering requirements.
EN 12644-1 : 2001+A1 : 2008 ; Cranes. Information for use and testing. Instructions
EN 12644-2 : 2000+A1 : 2008 ; Cranes. Information for use and testing. Marking
EN 12645 : 1999 ; Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing.
EN 12645 : 2014 ; Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing.
EN 12649 : 2008+A1 : 2011 ; Concrete compactors and smoothing machines. Safety.
EN 12653 : 1999+A2 : 2009 ; Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements.
EN 12654-2 : 1999 ; Textile glass. Yarns. Methods of test and general specifications
EN 12654-3 : 1999 ; Textile glass. Yarns. General requirements for general applications
EN 12655 : 1998 ; Gymnastic equipment. Hanging rings. Functional and safety requirements, test methods.
EN 12662 : 1998 ; Methods of test for petroleum and its products. Liquid petroleum products. Determination of contamination in middle distillates.
EN 12662 : 2008 ; Liquid petroleum products. Determination of contamination in middle distillates.
EN 12662 : 2014 ; Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters.
EN 12663-1 : 2010+A1 : 2014 ; Railway applications. Structural requirements of railway vehicle bodies. Locomotives and passenger rolling stock (and alternative method for freight wagons)
EN 12663-2 : 2010 ; Railway applications. Structural requirements of railway vehicle bodies. Freight wagons
EN 12663 : 2000 ; Railway applications. Structural requirements of railway vehicle bodies.
EN 12664 : 2001 ; Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Dry and moist products of medium and low thermal resistance.
EN 12665 : 2011 ; Light and lighting. Basic terms and criteria for specifying lighting requirements.
EN 12666-1 : 2005+A1 : 2011 ; Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system
EN 12667 : 2001 ; Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance.
EN 12668-1 : 2000 ; Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Instruments
EN 12668-3 : 2000 ; Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
EN 12668-3 : 2013 ; Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
EN 12669 : 2000 ; Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating.
EN 12671 : 2009 ; Chemicals used for treatment of water intended for human consumption. Chlorine dioxide generated in situ.
EN 12671 : 2016 ; Chemicals used for treatment of water intended for human consumption. Chlorine dioxide generated in situ.
EN 12672 : 2008 ; Chemicals used for treatment of water intended for human consumption. Potassium permanganate.
EN 12672 : 2016 ; Chemicals used for treatment of water intended for human consumption. Potassium permanganate.
EN 12673 : 1999 ; Water quality. Gas chromatographic determination of some selected chlorophenols in water.
EN 12674-4 : 2006 ; Roll containers. Performance requirements
EN 12674-4 : 2015 ; Roll containers. Performance requirements
EN 12675 : 2001 ; Traffic signal controllers. Functional safety requirements.
EN 12676-1 : 2000 ; Anti-glare systems for roads. Performance and characteristics
EN 12676-2 : 2000 ; Anti-glare systems for roads. Test methods
EN 12678 : 2008 ; Chemicals used for treatment of water intended for human consumption. Potassium peroxomonosulfate.
EN 12678 : 2016 ; Chemical used for treatment of water intended for human consumption. Potassium peroxomonosulfate.
EN 12679 : 2000 ; Non-destructive testing. Determination of the size of industrial radiographic sources. Radiographic method.
EN 12680-3 : 2011 ; Founding. Ultrasonic testing. Spheroidal graphite cast iron castings
EN 12682 : 1998 ; Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the functional expression of the genomic modification.
EN 12683 : 1998 ; Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the molecular stability of the genomic modification.
EN 12685 : 1998 ; Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate release of genetically modified micro-organisms, including viruses.
EN 12686 : 1998 ; Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified micro-organisms, including viruses.
EN 12687 : 1998 ; Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the genomic modification.
EN 12689 : 1998 ; Biotechnology. Guidance on assessment of the purity, biological activity and stability of micro-organism based products.
EN 12690 : 1999 ; Biotechnology. Performance criteria for shaft seals.
EN 12691 : 2001 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact.
EN 12691 : 2006 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact.
EN 12693 : 2008 ; Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors.
EN 12697-1 : 2000 ; Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content
EN 12697-1 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content
EN 12697-1 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt . Soluble binder content
EN 12697-2 : 2015 ; Bituminous mixtures. Test methods. Determination of particle size distribution
EN 12697-3 : 2000 ; Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery : Rotary evaporator
EN 12697-3 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Rotary evaporator
EN 12697-3 : 2013 ; Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery : Rotary evaporator
EN 12697-4 : 2000 ; Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery : Fractionating column
EN 12697-4 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Fractionating column
EN 12697-4 : 2015 ; Bituminous mixtures. Test methods. Bitumen recovery : Fractionating column
EN 12697-6 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens
EN 12697-7 : 2014 ; Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
EN 12697-11 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. Determination of the affinity between aggregate and bitumen
EN 12697-11 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Determination of the affinity between aggregate and bitumen
EN 12697-12 : 2008 ; Bituminous mixtures. Test methods for hot mix asphalt. Determination of the water sensitivity of bituminous specimens
EN 12697-16 : 2016 ; Bituminous mixtures. Test methods. Abrasion by studded tyres
EN 12697-19 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Permeability of specimen
EN 12697-20 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Indentation using cube or cylindrical specimens (CY)
EN 12697-21 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Indentation using plate specimens
EN 12697-24 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue
EN 12697-25 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. Cyclic compression test
EN 12697-25 : 2016 ; Bituminous mixtures. Test methods. Cyclic compression test
EN 12697-26 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Stiffness
EN 12697-27 : 2001 ; Bituminous mixtures. Test methods for hot mix asphalt. Sampling
EN 12697-28 : 2001 ; Bituminous mixtures. Test methods for hot mix asphalt. Preparation of samples for determining binder content, water content and grading
EN 12697-30 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by impact compactor
EN 12697-31 : 2007 ; Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by gyratory compactor
EN 12697-34 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Marshall test
EN 12697-35 : 2016 ; Bituminous mixtures. Test methods. Laboratory mixing
EN 12697-39 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition
EN 12697-40 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. In situ drainability
EN 12697-40 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. In situ drainability
EN 12697-41 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. Resistance to de-icing fluids
EN 12697-41 : 2013 ; Bituminous mixtures. Test methods for hot mix asphalt. Resistance to de-icing fluids
EN 12697-42 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. Amount of coarse foreign matter in reclaimed asphalt
EN 12697-42 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Amount of foreign matter in reclaimed asphalt
EN 12697-43 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fuel
EN 12697-43 : 2014 ; Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fuel
EN 12697-44 : 2010 ; Bituminous mixtures. Test methods for hot mix asphalt. Crack propagation by semi-circular bending test
EN 12697-45 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
EN 12697-46 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Low temperature cracking and properties by uniaxial tension tests
EN 12697-47 : 2010 ; Bituminous mixtures. Test methods for hot mix asphalt. Determination of the ash content of natural asphalts
EN 12697-49 : 2014 ; Bituminous mixtures. Test methods for hot mix asphalt. Determination of friction after polishing
EN 12698-1 : 2007 ; Chemical analysis of nitride bonded silicon carbide refractories. Chemical methods
EN 12698-2 : 2007 ; Chemical analysis of nitride bonded silicon carbide refractories. XRD methods
EN 12699 : 2001 ; Execution of special geotechnical work. Displacement piles.
EN 12699 : 2015 ; Execution of special geotechnical works. Displacement piles.
EN 12702 : 2000 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers.
EN 12703 : 1999 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature.
EN 12703 : 2012 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature.
EN 12703 : 2016 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature.
EN 12704 : 2000 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives.
EN 12704 : 2012 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives.
EN 12704 : 2016 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives.
EN 12705 : 2000 ; Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration.
EN 12705 : 2011 ; Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration.
EN 12706 : 2000 ; Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics.
EN 12707 : 2000 ; Plastic drums. Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l.
EN 12707 : 2009 ; Plastics drums. Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l.
EN 12708 : 2000 ; Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l.
EN 12709 : 2000 ; Plastic drums. Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l.
EN 12710 : 2000 ; Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l.
EN 12710 : 2006 ; Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l.
EN 12711 : 2000 ; Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 l.
EN 12712 : 2000 ; Plastics jerricans. Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm.
EN 12713 : 2000 ; Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L.
EN 12714 : 2000 ; Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 220 L.
EN 12714 : 2009 ; Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 60 L.
EN 12715 : 2000 ; Execution of special geotechnical work. Grouting.
EN 12717 : 2001+A1 : 2009 ; Safety of machine tools. Drilling machines.
EN 12720 : 1997 ; Furniture. Assessment of surface resistance to cold liquids.
EN 12720 : 2009+A1 : 2013 ; Furniture. Assessment of surface resistance to cold liquids.
EN 12721 : 1997 ; Furniture. Assessment of surface resistance to wet heat.
EN 12721 : 2009+A1 : 2013 ; Furniture. Assessment of surface resistance to wet heat.
EN 12722 : 1997 ; Furniture. Assessment of surface resistance to dry heat.
EN 12722 : 2009+A1 : 2013 ; Furniture. Assessment of surface resistance to dry heat.
EN 12723 : 2000 ; Liquid pumps. General terms for pumps and installations. Definitions, quantities, letter symbols and units.
EN 12726 : 2000 ; Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules.
EN 12727 : 2016 ; Furniture. Ranked seating. Requirements for safety, strength and durability.
EN 12728 : 2000 ; Surface active agents. Determination of foaming power. Perforated disc beating method.
EN 12730 : 2001 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading.
EN 12730 : 2015 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading.
EN 12732 : 2000 ; Gas supply systems. Welding steel pipework. Functional requirements.
EN 12732 : 2013+A1 : 2014 ; Gas infrastructure. Welding steel pipework. Functional requirements.
EN 12734 : 2000 ; Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing.
EN 12735-1 : 2010 ; Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for piping systems
EN 12735-1 : 2016 ; Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration. Tubes for piping systems
EN 12735-2 : 2010 ; Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for equipment
EN 12735-2 : 2016 ; Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration. Tubes for equipment
EN 12738 : 1999 ; Biotechnology. Laboratories for research, development and analysis. Guidance for containment of animals inoculated with microorganisms in experiments.
EN 12740 : 1999 ; Biotechnology. Laboratories for research, development and analysis. Guidance for handling, inactivating and testing of waste.
EN 12741 : 1999 ; Biotechnology. Laboratories for research, development and analysis. Guidance for biotechnology laboratory operations.
EN 12742 : 1999 ; Fruit and vegetable juices. Determination of free amino acids content. Liquid chromatographic method.
EN 12743 : 1999 ; Footwear. Test methods for outsoles. Compression energy.
EN 12744 : 1999 ; Footwear. Test methods for insoles. Delamination resistance.
EN 12745 : 1999 ; Footwear. Test methods for insoles. Pin holding strength.
EN 12746 : 2000 ; Footwear. Test methods for insoles and insocks. Water absorption and desorption.
EN 12747 : 1999 ; Footwear. Test methods for insoles. Abrasion resistance.
EN 12748 : 1999 ; Footwear. Test methods for outsoles, insoles, linings and insocks. Water soluble content.
EN 12750 : 2013 ; Safety of woodworking machines. Four sided moulding machines.
EN 12751 : 1999 ; Textiles. Sampling of fibres, yarns and fabrics for testing.
EN 12752-1 : 1999 ; Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW. Safety
EN 12752-2 : 1999 ; Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW. Rational use of energy
EN 12753 : 2005+A1 : 2010 ; Thermal cleaning systems for exhaust gas from surface treatment equipment. Safety requirements.
EN 12755 : 2000 ; Transportable gas cylinders. Filling conditions for acetylene bundles.
EN 12756 : 2001 ; Mechanical seals. Principal dimensions, designation and material codes.
EN 12757-1 : 2005+A1 : 2010 ; Mixing machinery for coating materials. Safety requirements. Mixing machinery for use in vehicle refinishing
EN 12758 : 2011 ; Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties.
EN 12760 : 1999 ; Valves. Socket welding ends for steel valves.
EN 12760 : 2016 ; Industrial valves. Socket welding ends for steel valves.
EN 12761-1 : 2001 ; Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. General
EN 12761-2 : 2001 ; Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Field crop sprayers
EN 12761-3 : 2001 ; Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Air-assisted sprayers for bush and tree crops
EN 12764 : 2004+A1 : 2008 ; Sanitary appliances. Specification for whirlpool baths.
EN 12765 : 2016 ; Classification of thermosetting wood adhesives for non-structural applications.
EN 12766-1 : 2000 ; Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products. Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
EN 12767 : 2000 ; Passive safety of support structures for road equipment. Requirements and test methods.
EN 12767 : 2007 ; Passive safety of support structures for road equipment. Requirements, classification and test methods.
EN 12770 : 2000 ; Footwear. Test methods for outsoles. Abrasion resistance.
EN 12771 : 2000 ; Footwear. Test methods for outsoles. Tear strength.
EN 12772 : 2000 ; Footwear. Test methods for outsoles. Dimensional stability.
EN 12773 : 2000 ; Footwear. Test methods for outsoles. Needle tear strength.
EN 12774 : 2000 ; Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance.
EN 12775 : 2001 ; Solid wood panels. Classification and terminology.
EN 12779 : 2004+A1 : 2009 ; Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety related performances and safety requirements.
EN 12779 : 2015 ; Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements.
EN 12781 : 2001 ; Wallcoverings. Specification for cork panels.
EN 12782 : 2000 ; Footwear. Test methods for insoles. Resistance to stitch tear.
EN 12784 : 2000 ; Footwear. Test methods for the whole shoe. Thermal insulation.
EN 12785 : 2000 ; Footwear. Test methods for whole shoe. Heel attachment.
EN 12786 : 1999 ; Safety of machinery. Guidance for the drafting of vibration clauses of safety standards.
EN 12786 : 2013 ; Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards.
EN 12788 : 2005 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength.
EN 12790 : 2009 ; Child use and care articles. Reclined cradles.
EN 12791 : 2005 ; Chemical disinfectants and antiseptics. Surgical hand disinfection. Test method and requirement (phase 2/step2).
EN 12791 : 2016 ; Chemical disinfectants and antiseptics. Surgical hand disinfection. Test method and requirements (phase 2, step 2).
EN 12794 : 2005 ; Precast concrete products. Foundation piles.
EN 12797 : 2000 ; Brazing. Destructive tests of brazed joints.
EN 12798 : 1999 ; Transport quality system. Road, rail and inland navigation transport. Quality system requirements to supplement BS EN ISO 9002 for the transport of dangerous goods with regard to safety.
EN 12798 : 2007 ; Transport quality management system. Road rail and inland navigation transport. Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods, with regard to safety.
EN 12799 : 2000 ; Brazing. Non-destructive examination of brazed joints.
EN 12800 : 2000 ; Footwear. Test methods for insoles. Dimensional stability.
EN 12801 : 2000 ; Footwear. Test methods for insoles, lining and insocks. Perspiration resistance.
EN 12802 : 2000 ; Road marking materials. Laboratory methods for identification.
EN 12802 : 2011 ; Road marking materials. Laboratory methods for identification.
EN 12803 : 2000 ; Footwear. Test methods for outsoles. Tensile strength and elongation.
EN 12807 : 2009 ; LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction .
EN 12808-1 : 1999 ; Adhesives and grouts for tiles. Determination of chemical resistance of reaction resin mortars
EN 12808-1 : 2008 ; Grouts for tiles. Determination of chemical resistance of reaction resin mortars
EN 12808-2 : 2008 ; Grouts for tiles. Determination of resistance to abrasion
EN 12808-3 : 2008 ; Grouts for tiles. Determination of flexural and compressive strength
EN 12808-4 : 2009 ; Grouts for tiles. Determination of shrinkage
EN 12808-5 : 2008 ; Grouts for tiles. Determination of water absorption
EN 12811-4 : 2013 ; Temporary works equipment. Protection fans for scaffolds. Performance requirements and product design
EN 12812 : 2008 ; Falsework. Performance requirements and general design.
EN 12814-1 : 2000 ; Testing of welded joints of thermoplastics semi-finished products. Bend test
EN 12814-2 : 2000 ; Testing of welded joints of thermoplastics semi-finished products. Tensile test
EN 12814-3 : 2000 ; Testing of welded joints of thermoplastics semi-finished products. Tensile creep test
EN 12814-3 : 2014 ; Testing of welded joints in thermoplastics semi-finished products. Tensile creep test
EN 12814-6 : 2000 ; Testing of welded joints of thermoplastics semi-finished products. Low temperature tensile test
EN 12816 : 2001 ; Transportable refillable steel and aluminium LPG cylinders. Disposal.
EN 12816 : 2010 ; LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal.
EN 12817 : 2010 ; LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m$u3 ;
EN 12819 : 2009 ; LPG equipment and accessories. Inspection and requalification of LPG tanks greater than 13 m$u3 ;
EN 12821 : 2000 ; Foodstuffs. Determination of vitamin D by high perfomance liquid chromatography. Measurement of cholecalciferol (D$d3) and ergocalciferol (D$d2).
EN 12821 : 2009 ; Foodstuffs. Determination of vitamin D by high performance liquid chromatography. Measurement of cholecalciferol (D3) or ergocalciferol (D2).
EN 12822 : 2000 ; Foodstuffs. Determination of vitamin E by high performance liquid chromatography. Measurement of $Ga-, $Gb-, $Gg- and $Gd-tocopherols.
EN 12822 : 2014 ; Foodstuffs. Determination of vitamin E by high performance liquid chromatography. Measurement of $Ga-, $Gb-, $Gg- and $Gd-tocopherol.
EN 12823-1 : 2000 ; Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-trans-retinol and 13-cis-retinol
EN 12823-1 : 2014 ; Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-E-retinol and 13-Z-retinol
EN 12823-2 : 2000 ; Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of $Gb-carotene
EN 12824 : 1998 ; Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Salmonella.
EN 12826 : 2000 ; Footwear. Test methods for lining and insocks. Static friction.
EN 12827 : 1999 ; Inland navigation vessels. Connections for the transfer of diesel oil.
EN 12828 : 2012+A1 : 2014 ; Heating systems in buildings. Design for water-based heating systems.
EN 12829 : 1998 ; Surface active agents. Preparation of water with known calcium hardness.
EN 12829 : 2011 ; Surface active agents. Preparation of water with known calcium and magnesium hardness.
EN 12830 : 1999 ; Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and suitability.
EN 12832 : 1999 ; Characterisation of sludges. Utilisation and disposal of sludges. Vocabulary.
EN 12838 : 2000 ; Installations and equipment for liquefied natural gas. Suitability testing of LNG sampling systems.
EN 12839 : 2012 ; Precast concrete products. Elements for fences.
EN 12840 : 2001 ; Safety of machine tools. Manually controlled turning machines with or without automatic control.
EN 12841 : 2006 ; Personal fall protection equipment. Rope access systems. Rope adjustment devices.
EN 12842 : 2000 ; Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods.
EN 12842 : 2012 ; Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods.
EN 12844 : 1998 ; Zinc and zinc alloys. Castings. Specifications.
EN 12845 : 2015 ; Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance.
EN 12846-1 : 2011 ; Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer. Bituminous emulsions
EN 12846-2 : 2011 ; Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer. Cut-back and fluxed bituminous binders
EN 12847 : 2009 ; Bitumen and bituminous binders. Determination of settling tendency of bituminous emulsions.
EN 12848 : 2009 ; Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions.
EN 12849 : 2009 ; Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions.
EN 12850 : 2009 ; Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions.
EN 12851 : 2005+A1 : 2010 ; Food processing machinery. Catering attachments for machines having an auxiliary drive hub. Safety and hygiene requirements.
EN 12856 : 1999 ; Foodstuffs. Determination of acesulfame-K, aspartame and saccharin. High performance liquid chromatographic method.
EN 12857 : 1999 ; Foodstuffs. Determination of cyclamate. High performance liquid chromatographic method.
EN 12858 : 1999 ; Paper. Printing and business paper. Requirements for continuous stationery.
EN 12859 : 2008 ; Gypsum blocks. Definitions, requirements and test methods.
EN 12859 : 2011 ; Gypsum blocks. Definitions, requirements and test methods.
EN 12862 : 2000 ; Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders.
EN 12865 : 2001 ; Hygrothermal performance of building components and building elements. Determination of the resistance of external wall systems to driving rain under pulsating air pressure.
EN 12868 : 1999 ; Child use and care articles. Methods for determining the release of N- nitrosamines and N-nitrosatable substances from elastomer orrubber teats and soothers.
EN 12871 : 2010 ; Wood-based panels. Performance specifications and requirements for load bearing boards for use in floors, walls and roofs.
EN 12871 : 2013 ; Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls.
EN 12873-1 : 2014 ; Influence of materials on water intended for human consumption. Influence due to migration. Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
EN 12873-2 : 2005 ; Influence of materials on water intended for human consumption. Influence due to migration. Test method for non-metallic and non-cementitious site-applied materials
EN 12873-3 : 2006 ; Influence of materials on water intended for human consumption. Influence due to migration. Test method for ion exchange and adsorbent resins
EN 12873-4 : 2006 ; Influence of materials on water intended for human consumption. Influence due to migration. Test method for water treatment membranes
EN 12874 : 2001 ; Flame arresters. Performance requirements, test methods and limits for use.
EN 12875-1 : 2005 ; Mechanical dishwashing resistance of utensils. Reference test method for domestic articles
EN 12875-4 : 2006 ; Mechanical dishwashing resistance of utensils. Rapid test for domestic ceramic articles
EN 12875-5 : 2006 ; Mechanical dishwashing resistance of utensils. Rapid test for ceramic catering articles
EN 12876 : 2009 ; Chemicals used for treatment of water intended for human consumption. Oxygen.
EN 12876 : 2015 ; Chemicals used for treatment of water intended for human consumption. Oxygen.
EN 12877-1 : 2000 ; Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. General introduction
EN 12877-2 : 2000 ; Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by injection moulding
EN 12877-3 : 2000 ; Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by oven test
EN 12877-4 : 2000 ; Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by two-roll milling
EN 12878 : 1999 ; Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test.
EN 12878 : 2005 ; Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test.
EN 12878 : 2014 ; Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test.
EN 12881-1 : 2005+A1 : 2008 ; Conveyor belts. Fire simulation flammability testing. Propane burner tests
EN 12881-1 : 2014 ; Conveyor belts. Fire simulation flammability testing. Propane burner tests
EN 12881-2 : 2005+A1 : 2008 ; Conveyor belts. Fire simulation flammability testing. Large scale fire test
EN 12882 : 2008 ; Conveyor belts for general purpose use. Electrical and flammability safety requirements.
EN 12882 : 2015 ; Conveyor belts for general purpose use. Electrical and flammability safety requirements.
EN 12883 : 2000 ; Founding. Equipment for the production of lost patterns for the lost wax casting process.
EN 12884 : 1999 ; Biotechnology. Performance criteria for centrifuges.
EN 12885 : 1999 ; Biotechnology. Performance criteria for cell disrupters.
EN 12889 : 2000 ; Trenchless construction and testing of drains and sewers.
EN 12890 : 2000 ; Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores.
EN 12892 : 2000 ; Founding. Equipment for the production of lost patterns for the lost foam casting process.
EN 12893 : 2000 ; Copper and copper alloys. Determination of spiral elongation number.
EN 12895 : 2000 ; Industrial trucks. Electromagnetic compability.
EN 12895 : 2015 ; Industrial trucks. Electromagnetic compatibility.
EN 12896-1 : 2016 ; Public transport. Reference data model. Common concepts
EN 12896-2 : 2016 ; Public transport. Reference data model. Public transport network
EN 12896-3 : 2016 ; Public transport. Reference data model. Timing information and vehicle scheduling
EN 12896 : 2006 ; Road transport and traffic telematics. Public transport. Reference data model.
EN 12897 : 2006 ; Water supply. Specification for indirectly heated unvented (closed) storage water heaters.
EN 12897 : 2016 ; Water supply. Specification for indirectly heated unvented (closed) storage water heaters.
EN 12898 : 2001 ; Glass in building. Determination of the emissivity.
EN 12899-1 : 2007 ; Fixed, vertical road traffic signs . Fixed signs
EN 12899-2 : 2007 ; Fixed, vertical road traffic signs. Transilluminated traffic bollards (TTB)
EN 12899-3 : 2007 ; Fixed, vertical road traffic signs. Delineator posts and retroreflectors
EN 12899-4 : 2007 ; Fixed, vertical road traffic signs. Factory production control
EN 12899-5 : 2007 ; Fixed, vertical road traffic signs . Initial type testing
EN 12900 : 1999 ; Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer’s performance data.
EN 12900 : 2005 ; Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer’s performance data.
EN 12900 : 2013 ; Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer’s performance data.
EN 12901 : 1999 ; Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Definitions.
EN 12902 : 1999 ; Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Methods of test.
EN 12903 : 1999 ; Products used for treatment of water intended for human consumption. Powdered activated carbon.
EN 12903 : 2009 ; Products used for the treatment of water intended for human consumption. Powdered activated carbon.
EN 12904 : 1999 ; Products used for treatment of water intended for human consumption. Sand and gravel.
EN 12904 : 2005 ; Products used for treatment of water intended for human consumption. Silica sand and silica gravel.
EN 12905 : 1999 ; Products used for treatment of water intended for human consumption. Expanded aluminosilicate.
EN 12905 : 2005 ; Products used for treatment of water intended for human consumption. Expanded aluminosilicate.
EN 12905 : 2012 ; Products used for treatment of water intended for human consumption. Expanded aluminosilicate.
EN 12906 : 1999 ; Products used for treatment of water intended for human consumption. Pumice.
EN 12906 : 2005 ; Products used for treatment of water intended for human consumption. Pumice.
EN 12906 : 2012 ; Products used for treatment of water intended for human consumption. Pumice.
EN 12907 : 1999 ; Products used for treatment of water intended for human consumption. Pyrolised coal material.
EN 12907 : 2009 ; Products used for treatment of water intended for human consumption. Pyrolyzed coal material.
EN 12909 : 1999 ; Products used for treatment of water intended for human consumption. Anthracite.
EN 12909 : 2005 ; Products used for treatment of water intended for human consumption. Anthracite.
EN 12909 : 2012 ; Products used for treatment of water intended for human consumption. Anthracite.
EN 12910 : 1999 ; Products used for treatment of water intended for human consumption. Garnet.
EN 12910 : 2005 ; Products used for treatment of water intended for human consumption. Garnet.
EN 12910 : 2012 ; Products used for treatment of water intended for human consumption. Garnet.
EN 12911 : 1999 ; Products used for treatment of water intended for human consumption. Manganese greensand.
EN 12911 : 2006 ; Products used for treatment of water intended for human consumption. Manganese greensand.
EN 12911 : 2013 ; Products used for treatment of water intended for human consumption. Manganese greensand.
EN 12912 : 1999 ; Products used for treatment of water intended for human consumption. Barite.
EN 12912 : 2005 ; Products used for treatment of water intended for human consumption. Barite.
EN 12912 : 2012 ; Products used for treatment of water intended for human consumption. Barite.
EN 12913 : 1999 ; Products used for treatment of water intended for human consumption. Powdered diatomaceous earth.
EN 12913 : 2005 ; Products used for treatment of water intended for human consumption. Powdered diatomaceous earth.
EN 12913 : 2012 ; Products used for treatment of water intended for human consumption. Powdered diatomaceous earth.
EN 12914 : 1999 ; Products used for treatment of water intended for human consumption. Powdered perlite.
EN 12914 : 2005 ; Products used for treatment of water intended for human consumption. Powdered perlite.
EN 12914 : 2012 ; Products used for treatment of water intended for human consumption. Powdered perlite.
EN 12915-1 : 2009 ; Products used for the treatment of water intended for human consumption. Granular activated carbon. Virgin granular activated carbon
EN 12915-2 : 2009 ; Products used for the treatment of water intended for human consumption. Granular activated carbon. Reactivated granular activated carbon
EN 12915 : 1999 ; Products used for treatment of water intended for human consumption. Granular activated carbon.
EN 12916 : 2000 ; Methods of test for petroleum and its products. Petroleum products. Determination of aromatic hydrocarbon in middle distillates. High performance liquid chromatography method with refractive index detection.
EN 12916 : 2006 ; Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection.
EN 12916 : 2016 ; Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection.
EN 12918 : 1999 ; Water quality. Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis.
EN 12919 : 1999 ; Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods.
EN 12920 : 2006+A1 : 2008 ; Characterization of waste. Methodology for the determination of the leaching behaviour of waste under specified conditions.
EN 12921-1 : 2005+A1 : 2010 ; Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Common safety requirements
EN 12921-2 : 2005+A1 : 2008 ; Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using water based cleaning liquids
EN 12921-3 : 2005+A1 : 2008 ; Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using flammable cleaning liquids
EN 12921-4 : 2005+A1 : 2008 ; Machines for surface cleaning and pretreatment of industrial items using liquids and vapours. Safety of machines using halogenated solvents
EN 12923-1 : 2006 ; Advanced technical ceramics. Monolithic ceramics. General practice for undertaking corrosion tests
EN 12926 : 2000 ; Chemicals used for treatment of water intended for human consumption. Sodium peroxodisulfate.
EN 12926 : 2008 ; Chemicals used for treatment of water intended for human consumption. Sodium peroxodisulfate.
EN 12926 : 2015 ; Chemicals used for treatment of water intended for human consumption. Sodium peroxodisulfate.
EN 12928 : 2000 ; Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l.
EN 12929-1 : 2015 ; Safety requirements for cableway installations designed to carry persons. General requirements. Requirements for all installations
EN 12929-2 : 2015 ; Safety requirements for cableway installations designed to carry persons. General requirements. Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
EN 12930 : 2015 ; Safety requirements for cableway installations designed to carry persons. Calculations.
EN 12931 : 2008 ; Chemicals used for water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, anhydrous.
EN 12931 : 2015 ; Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, anhydrous.
EN 12932 : 2008 ; Chemicals used for water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, dihydrate.
EN 12932 : 2015 ; Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, dihydrate.
EN 12933 : 2008 ; Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Trichloroisocyanuric acid.
EN 12933 : 2015 ; Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Trichloroisocyanuric acid.
EN 12934 : 2000 ; Feather and down. Composition labelling of processed feathers and down for use as sole filling material.
EN 12938 : 2000 ; Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry.
EN 12939 : 2001 ; Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Thick products of high and medium thermal resistance.
EN 12940 : 2004 ; Footwear manufacturing wastes. Waste classification and management.
EN 12941 : 1998+A2 : 2008 ; Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements, testing, marking.
EN 12942 : 1998+A2 : 2008 ; Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. Requirements, testing, marking.
EN 12943 : 2000 ; Filler materials for thermoplastics. Scope, designation, requirements, tests.
EN 12944-1 : 2000 ; Fertilizers and liming materials. Vocabulary. General terms
EN 12944-2 : 2000 ; Fertilizers and liming materials. Vocabulary. Terms relating to fertilizers
EN 12945 : 2008 ; Liming materials. Determination of neutralizing value. Titrimetric methods.
EN 12945 : 2014+A1 : 2016 ; Liming materials. Determination of neutralizing value. Titrimetric methods.
EN 12946 : 2000 ; Liming materials. Determination of calcium content and magnesium content. Complexometric method.
EN 12947 : 2000 ; Liming materials. Determination of magnesium content. Atomic absorption spectrometric method.
EN 12948 : 2010 ; Liming materials. Determination of size distribution by dry and wet sieving.
EN 12951 : 2004 ; Prefabricated accessories for roofing. Permanently fixed roof ladders. Product specification and test methods.
EN 12952-1 : 2015 ; Water-tube boilers and auxiliary installations. General
EN 12952-2 : 2011 ; Water-tube boilers and auxiliary installations. Materials for pressure parts of boilers and accessories
EN 12952-3 : 2011 ; Water-tube boilers and auxiliary installations. Design and calculation for pressure parts of the boiler
EN 12952-4 : 2000 ; Water-tube boilers and auxiliary installations. In-service boiler life expectancy calculations
EN 12952-4 : 2011 ; Water-tube boilers and auxiliary installations. In-service boiler life expectancy calculations
EN 12952-5 : 2011 ; Water-tube boilers and auxiliary installations. Workmanship and construction of pressure parts of the boiler
EN 12952-6 : 2011 ; Water-tube boilers and auxiliary installations. Inspection during construction ; documentation and marking of pressure parts of the boiler
EN 12952-7 : 2012 ; Water-tube boilers and auxiliary installations. Requirements for equipment for the boiler
EN 12952-11 : 2007 ; Water-tube boilers and auxiliary installations. Requirements for limiting devices of the boiler and accessories
EN 12952-18 : 2012 ; Water-tube boilers and auxiliary installations. Operating instructions
EN 12953-2 : 2012 ; Shell boilers. Materials for pressure parts of boilers and accessories
EN 12953-3 : 2016 ; Shell boilers. Design and calculation for pressure parts
EN 12953-6 : 2011 ; Shell boilers. Requirements for equipment for the boiler
EN 12953-9 : 2007 ; Shell boilers. Requirements for limiting devices of the boiler and accessories
EN 12955 : 1999 ; Foodstuffs. Determination of aflatoxin B$d1, and the sum of aflatoxins B$d1, B$d2, G$d1 and G$d2 in cereals, shell-fruits and derived products. High performance liquid chromatographic method with post column derivatization and immunoaffinity column clean up.
EN 12956 : 1999 ; Wallcoverings in roll form. Determination of dimensions, straightness, spongeability and washability.
EN 12958 : 2000 ; Footwear. Test methods for shanks. Fatigue resistance.
EN 12959 : 2000 ; Footwear. Test methods for shanks. Longitudinal stiffness.
EN 12960 : 2001 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance.
EN 12961 : 2001 ; Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives.
EN 12962 : 2001 ; Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index).
EN 12962 : 2011 ; Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index).
EN 12966-1 : 2005+A1 : 2009 ; Road vertical signs. Variable message traffic signs. Product standard
EN 12966-2 : 2005 ; Road vertical signs. Variable message traffic signs. Initial type testing
EN 12966-3 : 2005 ; Road vertical signs. Variable message traffic signs. Factory production control
EN 12966 : 2014 ; Road vertical signs. Variable message traffic signs.
EN 12967-1 : 2007 ; Health informatics. Service architecture. Enterprise viewpoint
EN 12967-2 : 2007 ; Health informatics. Service architecture. Information viewpoint
EN 12967-3 : 2007 ; Health informatics. Service architecture. Computational viewpoint
EN 12971-1 : 1999 ; Reinforcements. Specification for textile glass chopped strands. Designation
EN 12971-2 : 1999 ; Reinforcements. Specification for textile glass chopped strands. Test methods and general requirements
EN 12971-3 : 1999 ; Reinforcements. Specification for textile glass chopped strands. Specific requirements
EN 12972 : 2007 ; Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks.
EN 12972 : 2015 ; Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks.
EN 12974 : 2000 ; Surface active agents. Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure.
EN 12975-1 : 2000 ; Thermal solar systems and components. Solar collectors. General requirements
EN 12975-1 : 2006+A1 : 2010 ; Thermal solar systems and components. Solar collectors. General requirements
EN 12975-2 : 2006 ; Thermal solar systems and components. Solar collectors. Test methods
EN 12976-1 : 2001 ; Thermal solar systems and components. Factory made systems. General requirements
EN 12976-1 : 2006 ; Thermal solar systems and components. Factory made systems. General requirements
EN 12976-2 : 2001 ; Thermal solar systems and components. Factory made systems. Test methods
EN 12976-2 : 2006 ; Thermal solar systems components. Factory made systems. Test methods
EN 12977-1 : 2012 ; Thermal solar systems and components. Custom built systems. General requirements for solar water heaters and combisystems
EN 12977-2 : 2012 ; Thermal solar systems and components. Custom built systems. Test methods for solar water heaters and combisystems
EN 12977-3 : 2008 ; Thermal solar systems and components. Custom built systems. Performance test methods for solar water heater stores
EN 12977-3 : 2012 ; Thermal solar systems and components. Custom built systems. Performance test methods for solar water heater stores
EN 12977-4 : 2012 ; Thermal solar systems and components. Custom built systems. Performance test methods for solar combistores
EN 12977-5 : 2012 ; Thermal solar systems and components. Custom built systems. Performance test methods for control equipment
EN 12980 : 2000 ; Materials and articles in contact with foodstuffs. Non-metallic articles for catering and industrial use. Method of test for the determination of impact resistance.
EN 12981 : 2005+A1 : 2009 ; Coating plants. Spray booths for application of organic powder coating material. Safety requirements.
EN 12982 : 2000 ; Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves.
EN 12982 : 2009 ; Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves.
EN 12983-1 : 2000+A1 : 2004 ; Cookware. Domestic cookware for use on top of a stove, cooker or hob. General requirements
EN 12984 : 2005+A1 : 2010 ; Food processing machinery. Portable and/or hand-guided machines and appliances with mechanically driven cutting tools. Safety and hygiene requirements.
EN 13001-1 : 2004+A1 : 2009 ; Cranes. General design. General principles and requirements
EN 13001-1 : 2015 ; Cranes. General design. General principles and requirements
EN 13001-2 : 2011 ; Crane safety. General design. Load actions.
EN 13001-2 : 2014 ; Crane safety. General design. Load actions
EN 13001-3-1 : 2012+A1 : 2013 ; Cranes. General Design. Limit States and proof competence of steel structure
EN 13001-3-2 : 2014 ; Cranes. General design. Limit states and proof of competence of wire ropes in reeving systems
EN 13001-3-3 : 2014 ; Cranes. General design. Limit states and proof of competence of wheel/rail contacts
EN 13002-2 : 1999 ; Carbon fibre yarns. Test methods and general specifications
EN 13003-1 : 1999 ; Para-aramid fibre filament yarns. Designation
EN 13003-2 : 1999 ; Para-aramid fibre filament yarns. Methods of test and general specifications
EN 13003-3 : 1999 ; Para-aramid fibre filament yarns. Technical specifications
EN 13007 : 2000 ; Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l.
EN 13008 : 2000 ; Steel drums. Removable head (open head) drums with a nominal capacity of 15 l to 62 l.
EN 13009 : 2000 ; Hygrothermal performance of building materials and products. Determination of hygric expansion coefficient.
EN 13011 : 2001 ; Transport services. Goods transport chains. System for declaration of performance conditions.
EN 13012 : 2012 ; Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers.
EN 13014 : 2000 ; Connections for gas sampling tubes to anaesthetic and respiratory equipment.
EN 13016-1 : 2000 ; Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP)
EN 13016-1 : 2007 ; Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
EN 13016-2 : 2000 ; Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40 ^DC and 100 ^DC
EN 13016-2 : 2007 ; Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40^DC and 100^DC
EN 13017-1 : 2001 ; Solid wood panels. Classification by surface appearance. Solid wood panels. Classification by surface appearance. Softwood
EN 13017-2 : 2001 ; Solid wood panels. Classification by surface appearance. Hardwood
EN 13018 : 2001 ; Non-destructive testing. Visual testing. General principles.
EN 13018 : 2016 ; Non-destructive testing. Visual testing. General principles.
EN 13019 : 2001+A1 : 2008 ; Machines for road surface cleaning. Safety requirements.
EN 13020 : 2004+A1 : 2010 ; Road surface treatment machines. Safety requirements.
EN 13020 : 2015 ; Road surface treatment machines. Safety requirements.
EN 13022-1 : 2006+A1 : 2010 ; Glass in building. Structural sealant glazing. Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
EN 13022-1 : 2014 ; Glass in building. Structural sealant glazing. Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
EN 13022-2 : 2006+A1 : 2010 ; Glass in building. Structural sealant glazing. Assembly rules
EN 13022-2 : 2014 ; Glass in building. Structural sealant glazing. Assembly rules
EN 13024-1 : 2011 ; Glass in building. Thermally toughened borosilicate safety glass. Definition and description
EN 13025-1 : 2005 ; Packaging. Light gauge metal containers. Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
EN 13025-2 : 2005 ; Packaging. Light gauge metal containers. Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
EN 13025-3 : 2005 ; Packaging. Light gauge metal containers. Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000 ml
EN 13025 : 2000 ; Packaging. Light gauge metal packaging. Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40000 ml.
EN 13026 : 2001 ; Packaging. Light-gauge metal packaging. Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml.
EN 13027 : 2001 ; Packaging. Light-gauge metal packaging. Open-top round cans defined by their nominal gross-lidded capacity.
EN 13028 : 2001 ; Packaging. Light-gauge metal packaging. Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes.
EN 13029 : 2001 ; Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures.
EN 13029 : 2009 ; Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures.
EN 13032-1 : 2004+A1 : 2012 ; Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Measurement and file format
EN 13032-2 : 2004 ; Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for indoor and outdoor work places
EN 13032-3 : 2007 ; Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for emergency lighting of work places
EN 13032-4 : 2015 ; Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. LED lamps, modules and luminaires
EN 13034 : 2005+A1 : 2009 ; Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment).
EN 13035-1 : 2008 ; Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Storage, handling and transportation equipment inside the factory
EN 13035-2 : 2008 ; Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Storage, handling and transportation equipment outside the factory
EN 13035-5 : 2006+A1 : 2009 ; Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Machines and installations for stacking and de-stacking
EN 13035-6 : 2006+A1 : 2009 ; Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Machines for break-out
EN 13035-7 : 2006+A1 : 2009 ; Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Cutting machines for laminated glass
EN 13035-9 : 2006+A1 : 2010 ; Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Washing installations
EN 13035-11 : 2006+A1 : 2010 ; Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Drilling machines
EN 13036-1 : 2010 ; Road and airfield surface characteristics. Test methods. Measurement of pavement surface macrotexture depth using a volumetric patch technique
EN 13036-4 : 2011 ; Road and airfield surface characteristics. Test methods . Method for measurement of slip/skid resistance of a surface : The pendulum test
EN 13036-6 : 2008 ; Road and airfield surface characteristics. Test methods. Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
EN 13036-8 : 2008 ; Road and airfield surface characteristics. Test methods. Determination of transverse unevenness indices
EN 13037 : 2000 ; Soil improvers and growing media. Determination of pH.
EN 13037 : 2011 ; Soil improvers and growing media. Determination of pH.
EN 13038 : 2000 ; Soil improvers and growing media. Determination of electrical conductivity.
EN 13038 : 2011 ; Soil improvers and growing media. Determination of electrical conductivity.
EN 13039 : 2000 ; Soil improvers and growing media. Determination of organic matter content and ash.
EN 13039 : 2011 ; Soil improvers and growing media. Determination of organic matter content and ash.
EN 13040 : 2000 ; Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density.
EN 13040 : 2007 ; Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density.
EN 13041 : 2000 ; Soil improvers and growing media. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore space.
EN 13041 : 2011 ; Soil improvers and growing media. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore space.
EN 13042-1 : 2007+A1 : 2009 ; Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Gob feeder
EN 13042-3 : 2007+A1 : 2009 ; Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. IS Machines
EN 13043 : 2013 ; Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas.
EN 13044-1 : 2011 ; Intermodal Loading Units. Marking. Markings for identification
EN 13044-2 : 2011 ; Intermodal loading units. Marking. Markings of swap bodies related to rail operation
EN 13044-3 : 2011 ; Intermodal Loading Units. Marking. Markings of semi-trailers related to rail operation
EN 13044 : 2001 ; Swap bodies. Coding, identification and marking.
EN 13045 : 2000 ; Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances.
EN 13045 : 2009 ; Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances.
EN 13046 : 2000 ; Packaging. Flexible cylindrical metallic tubes. Dimensions and tolerances.
EN 13047 : 2000 ; Packaging. Flexible conical metallic tubes. Dimensions and tolerances.
EN 13048 : 2000 ; Packaging. Flexible aluminium tubes. Internal lacquer film thickness measurement method.
EN 13048 : 2009 ; Packaging. Flexible aluminium tubes. Internal lacquer film thickness measurement method.
EN 13050 : 2011 ; Curtain Walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray.
EN 13053 : 2006+A1 : 2011 ; Ventilation for buildings. Air handling units. Rating and performance for units, components and sections.
EN 13054 : 2001 ; Packaging. Complete, filled transport packages. Test methods for the determination of the centre of gravity of a package.
EN 13056 : 2000 ; Inland navigation vessels. Stairs with inclination angles of 30 degrees to $0L 45 degrees. Requirements, types.
EN 13061 : 2009 ; Protective clothing. Shin guards for association football players. Requirements and test methods.
EN 13063-1 : 2005 ; Chimneys. System chimneys with clay/ceramic flue liners. Requirements and test methods for sootfire resistance
EN 13063-2 : 2005 ; Chimneys. System chimneys with clay/ceramic flue liners. Requirements and test methods under wet conditions
EN 13063-3 : 2007 ; Chimneys. System chimneys with clay/ceramic flue liners. Requirements and test methods for air flue system chimneys
EN 13067 : 2012 ; Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies.
EN 13068-1 : 2000 ; Non-destructive testing. Radioscopic testing. Quantitative measurement of imaging properties
EN 13068-2 : 2000 ; Non-destructive testing. Radioscopic testing. Check of long term stability of imaging devices
EN 13069 : 2005 ; Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods.
EN 13071-1 : 2008 ; Stationary waste containers up to 5000 l, top lifted and bottom emptied. General requirements
EN 13071-2 : 2008+A1 : 2013 ; Stationary waste containers up to 5 000 l, top lifted and bottom emptied. Additional requirements for underground or partly underground systems
EN 13071-3 : 2011 ; Stationary waste containers up to 5000 l, top lifted and bottom emptied. Recommended lifting connections
EN 13073 : 2001 ; Footwear. Test methods for whole shoe. Water resistance.
EN 13074-1 : 2011 ; Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders. Recovery by evaporation
EN 13074-2 : 2011 ; Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders. Stabilisation after recovery by evaporation
EN 13075-1 : 2009 ; Bitumen and bituminous binders. Determination of breaking behaviour. Determination of breaking value of cationic bituminous emulsions, mineral filler method
EN 13075-1 : 2016 ; Bitumen and bituminous binders. Determination of breaking behaviour. Determination of breaking value of cationic bituminous emulsions, mineral filler method
EN 13075-2 : 2009 ; Bitumen and bituminous binders. Determination of breaking behaviour. Determination of fines mixing time of cationic bituminous emulsions
EN 13075-2 : 2016 ; Bitumen and bituminous binders. Determination of breaking behaviour. Determination of fines mixing time of cationic bituminous emulsions
EN 13077 : 2008 ; Devices to prevent pollution by backflow of potable water. Air gap with non-circular overflow (unrestricted). Family A. Type B.
EN 13081 : 2001 ; Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adapter and coupler.
EN 13081 : 2008+A1 : 2012 ; Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler.
EN 13082 : 2001 ; Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve.
EN 13082 : 2008+A1 : 2012 ; Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve.
EN 13083 : 2001 ; Tanks for transport of dangerous goods. Service equipment for tanks. Adapter for bottom loading and unloading.
EN 13083 : 2008+A1 : 2013 ; Tanks for transport of dangerous goods. Service equipment for tanks. Adaptor for bottom loading and unloading .
EN 13084-1 : 2007 ; Free-standing chimneys. General requirements
EN 13084-2 : 2007 ; Free-standing chimneys. Concrete chimneys
EN 13084-4 : 2005 ; Free-standing chimneys. Brick liners. Design and execution
EN 13084-5 : 2005 ; Free-standing chimneys. Material for brick liners. Product specifications
EN 13084-6 : 2004 ; Free-standing chimneys. Steel liners. Design and execution
EN 13084-7 : 2005 ; Free-standing chimneys. Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13084-7 : 2012 ; Free-standing chimneys. Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13084-8 : 2005 ; Free-standing industrial chimneys. Design and execution of mast construction with satellite components
EN 13085 : 2001 ; Wallcoverings. Specification for cork rolls.
EN 13087-1 : 2000 ; Protective helmets. Test methods. Conditions and conditioning
EN 13087-2 : 2000 ; Protective helmets. Test methods. Shock absorption
EN 13087-2 : 2012 ; Protective helmets. Test methods. Shock absorption
EN 13087-3 : 2000 ; Protective helmets. Test methods. Resistance to penetration
EN 13087-4 : 2000 ; Protective helmets. Test methods. Retention system effectiveness
EN 13087-4 : 2012 ; Protective helmets. Test methods. Retention system effectiveness
EN 13087-5 : 2012 ; Protective helmets. Test methods. Retention system strength
EN 13087-6 : 2000 ; Protective helmets. Test methods. Field of vision
EN 13087-6 : 2012 ; Protective helmets. Test methods. Field of vision
EN 13087-7 : 2000 ; Protective helmets. Test methods. Flame resistance
EN 13087-10 : 2012 ; Protective helmets. Test methods. Resistance to radiant heat
EN 13088 : 2001 ; Manufactured articles filled with feather and down. Method for the determination of a filled product’s total mass and of the mass of the filling.
EN 13089 : 1999 ; Mountaineering equipment. Ice tools. Safety requirements and test methods.
EN 13089 : 2011+A1 : 2015 ; Mountaineering equipment. Ice-tools. Safety requirements and test methods.
EN 13091 : 2000 ; Biotechnology. Performance criteria for filter elements and filtration assemblies.
EN 13092 : 2000 ; Biotechnology. Guidance on sampling and inoculation procedures.
EN 13094 : 2008 ; Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction.
EN 13094 : 2015 ; Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction.
EN 13095 : 2000 ; Biotechnology. Performance criteria for off-gas systems.
EN 13100-1 : 2000 ; Non destructive testing of welded joints of thermoplastics semi-finished products. Visual examination
EN 13100-4 : 2012 ; Non destructive testing of welded joints of thermoplastics semifinished products. High voltage testing
EN 13102 : 2005+A1 : 2008 ; Ceramic machines. Safety. Loading and unloading of fine clay tiles.
EN 13103 : 2009+A2 : 2012 ; Railway applications. Wheelsets and bogies. Non powered axles. Design method.
EN 13104 : 2009+A2 : 2012 ; Railway applications. Wheelsets and bogies. Powered axles. Design method.
EN 13107 : 2015 ; Safety requirements for cableway installations designed to carry persons. Civil engineering works.
EN 13108-1 : 2006 ; Bituminous mixtures. Material specifications. Asphalt Concrete
EN 13108-1 : 2016 ; Bituminous mixtures. Material specifications. Asphalt Concrete
EN 13108-2 : 2006 ; Bituminous mixtures. Material specifications. Asphalt concrete for very thin layers
EN 13108-2 : 2016 ; Bituminous mixtures. Material specifications. Asphalt Concrete for Very Thin Layers (BBTM)
EN 13108-3 : 2006 ; Bituminous mixtures. Material specifications. Soft asphalt
EN 13108-3 : 2016 ; Bituminous mixtures. Material specifications. Soft Asphalt
EN 13108-4 : 2006 ; Bituminous mixtures. Material specifications. Hot Rolled Asphalt
EN 13108-4 : 2016 ; Bituminous mixtures. Material specifications. Hot Rolled Asphalt
EN 13108-5 : 2006 ; Bituminous mixtures. Material specifications. Stone mastic asphalt
EN 13108-5 : 2016 ; Bituminous mixtures. Material specifications. Stone Mastic Asphalt
EN 13108-6 : 2006 ; Bituminous mixtures. Material specifications. Mastic asphalt
EN 13108-6 : 2016 ; Bituminous mixtures. Material specifications. Mastic Asphalt
EN 13108-7 : 2006 ; Bituminous mixtures. Material specifications. Porous Asphalt
EN 13108-7 : 2016 ; Bituminous mixtures. Material specifications. Porous Asphalt
EN 13108-8 : 2005 ; Bituminous mixtures. Material specifications. Reclaimed asphalt
EN 13108-8 : 2016 ; Bituminous mixtures. Material specifications. Reclaimed asphalt
EN 13108-9 : 2016 ; Bituminous mixtures. Material specifications. Asphalt for Ultra-Thin Layer (AUTL)
EN 13108-20 : 2006 ; Bituminous mixtures. Material specifications. Type testing
EN 13108-20 : 2016 ; Bituminous mixtures. Material specifications. Type Testing
EN 13108-21 : 2006 ; Bituminous mixtures. Material specifications. Factory production control
EN 13108-21 : 2016 ; Bituminous mixtures. Material specifications. Factory Production Control
EN 13109 : 2010 ; LPG equipment and accessories. LPG tanks and drums. Disposal.
EN 13110 : 2012 ; LPG equipment and accessories. Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG). Design and construction.
EN 13111 : 2001 ; Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration.
EN 13111 : 2010 ; Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration.
EN 13117-1 : 2000 ; Transport packaging. Reusable, rigid plastics distribution boxes. General purpose application
EN 13117-2 : 2000 ; Transport packaging. Reusable, rigid plastics distribution boxes. General specifications for testing
EN 13120 : 2009+A1 : 2014 ; Internal blinds. Performance requirements including safety.
EN 13121-3 : 2008+A1 : 2010 ; GRP tanks and vessels for use above ground. Design and workmanship
EN 13121-3 : 2016 ; GRP tanks and vessels for use above ground. Design and workmanship
EN 13121-4 : 2005 ; GRP tanks and vessels for use above ground. Delivery, installation and maintenance
EN 13126-1 : 2006 ; Building hardware. Requirements and test methods for windows and doors height windows. Requirements common to all types of hardware
EN 13126-1 : 2011 ; Building hardware. Hardware for windows and door height windows. Requirements and test methods. Requirements common to all types of hardware
EN 13126-2 : 2011 ; Building hardware. Requirements and test methods for windows and doors height windows. Window fastener handles
EN 13126-3 : 2011 ; Building hardware. Hardware for windows and door-height windows. Requirements and test methods. Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware
EN 13126-4 : 2008 ; Building hardware. Requirements and test methods for windows and doors height windows. Espagnolettes
EN 13126-5 : 2011+A1 : 2014 ; Building hardware. Hardware for windows and door height windows. Requirements and test methods. Devices that restrict the opening of windows and door height windows
EN 13126-6 : 2008 ; Building hardware. Requirements and test methods for windows and doors height windows. Variable geometry stay hinges (with or without a friction stay)
EN 13126-7 : 2007 ; Building hardware. Requirements and test methods for windows and door height windows. Finger catches
EN 13126-8 : 2006 ; Building hardware. Requirements and test methods for windows and doors height windows. Tilt & turn, tilt-first and turn-only hardware
EN 13126-9 : 2013 ; Building hardware. Requirements and test methods for windows and door height windows. Hardware for horizontal and vertical pivot windows
EN 13126-10 : 2008 ; Building hardware. Requirements and test methods for windows and doors height windows. Arm-balancing systems
EN 13126-11 : 2008 ; Building hardware. Requirements and test methods for windows and doors height windows. Top hung projecting reversible hardware
EN 13126-12 : 2008 ; Building hardware. Requirements and test methods for windows and doors height windows. Side hung projecting reversible hardware
EN 13126-13 : 2012 ; Building hardware. Hardware for windows and balcony doors. Requirements and test methods. Sash balances
EN 13126-14 : 2012 ; Building hardware. Hardware for windows and balcony doors. Requirements and test methods. Sash fasteners
EN 13126-15 : 2008 ; Building hardware. Requirements and test methods for windows and doors height windows. Rollers for horizontal sliding and sliding folding windows and doors
EN 13126-16 : 2008 ; Building hardware. Requirements and test methods for windows and doors height windows. Hardware for Lift&Slide windows and doors
EN 13126-17 : 2008 ; Building hardware. Requirements and test methods for windows and doors height windows. Hardware for Tilt&Slide windows and doors
EN 13126-19 : 2011 ; Building hardware. Requirements and test methods for windows and door height windows. Sliding closing devices
EN 13129 : 2016 ; Railway applications. Air conditioning for main line rolling stock. Comfort parameters and type tests.
EN 13131 : 2000 ; Methods of test for petroleum and its products. Liquid petroleum products. Determination of nickel and vanadium content. Atomic absorption spectrometric method.
EN 13132 : 2000 ; Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching.
EN 13135 : 2013 ; Cranes. Safety. Design. Requirements for equipment.
EN 13136 : 2013 ; Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Methods for calculation.
EN 13138-1 : 2008 ; Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be worn
EN 13138-1 : 2014 ; Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be worn
EN 13138-2 : 2007 ; Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be held
EN 13138-2 : 2014 ; Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be held
EN 13138-3 : 2007 ; Buoyant aids for swimming instruction. Safety requirements and test methods for swim seats to be worn
EN 13138-3 : 2014 ; Buoyant aids for swimming instruction. Safety requirements and test methods for swim seats to be worn
EN 13141-2 : 2010 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust and supply air terminal devices
EN 13141-4 : 2011 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Fans used in residential ventilation systems
EN 13141-5 : 2004 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Cowls and roof outlet terminal devices
EN 13141-6 : 2014 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust ventilation system packages used in a single dwelling
EN 13141-7 : 2004 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
EN 13141-7 : 2010 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
EN 13141-8 : 2006 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
EN 13141-8 : 2014 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
EN 13141-9 : 2008 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Externally mounted humidity controlled air transfer device
EN 13141-10 : 2008 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Humidity controlled extract air terminal device
EN 13141-11 : 2015 ; Ventilation for buildings. Performance testing of components/products for residential ventilation. Supply ventilation units
EN 13142 : 2013 ; Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics.
EN 13145 : 2001+A1 : 2011 ; Railway applications. Track. Wood sleepers and bearers.
EN 13146-1 : 2012+A1 : 2014 ; Railway applications. Track. Test methods for fastening systems. Determination of longitudinal rail restraint
EN 13146-2 : 2012 ; Railway applications. Track. Test methods for fastening systems. Determination of torsional resistance
EN 13146-3 : 2012 ; Railway applications. Track. Test methods for fastening systems. Determination of attenuation of impact loads
EN 13146-4 : 2012+A1 : 2014 ; Railway applications. Track. Test methods for fastening systems. Effect of repeated loading
EN 13146-5 : 2012 ; Railway applications. Track. Test methods for fastening systems. Determination of electrical resistance
EN 13146-6 : 2012 ; Railway applications. Track. Test methods for fastening systems. Effect of severe environmental conditions
EN 13146-7 : 2012 ; Railway applications. Track. Test methods for fastening systems. Determination of clamping force
EN 13146-8 : 2012 ; Railway applications. Track. Test methods for fastening systems. In service testing
EN 13146-9 : 2009+A1 : 2011 ; Railway applications. Track. Test methods for fastening systems. Determination of stiffness
EN 13148 : 2010 ; Copper and copper alloys. Hot-dip tinned strip.
EN 13149-2 : 2004 ; Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications
EN 13157 : 2004+A1 : 2009 ; Cranes. Safety. Hand powered cranes.
EN 13158 : 2000 ; Protective clothing. Protective jackets, body and shoulder protectors for horse riders. Requirements and test methods.
EN 13158 : 2009 ; Protective clothing. Protective jackets, body and shoulder protectors for equestrian use : For horse riders and those working with horses, and for horse drivers. Requirements and test methods.
EN 13160-1 : 2016 ; Leak detection systems. General Principles
EN 13160-2 : 2016 ; Leak detection systems. Requirements and test/assessment methods for pressure and vacuum systems
EN 13160-3 : 2016 ; Leak detection systems. Requirements and test/assessment methods for liquid systems for tanks
EN 13160-4 : 2016 ; Leak detection systems. Requirements and test/assessment methods for sensor based leak detection systems
EN 13160-5 : 2016 ; Leak detection systems. Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
EN 13160-6 : 2016 ; Leak detection systems. Sensors in monitoring wells
EN 13160-7 : 2016 ; Leak detection systems. Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
EN 13161 : 2008 ; Natural stone test methods. Determination of flexural strength under constant moment.
EN 13162 : 2008 ; Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification.
EN 13162 : 2012+A1 : 2015 ; Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification.
EN 13163 : 2008 ; Thermal insulation products for buildings. Factory made products of expanded polystyrene (EPS). Specification.
EN 13163 : 2012+A1 : 2015 ; Thermal insulation products for buildings. Factory made expanded polystyrene (EPS) products. Specification.
EN 13164 : 2008 ; Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification.
EN 13164 : 2012+A1 : 2015 ; Thermal insulation products for buildings. Factory made extruded polystyrene foam (XPS) products. Specification.
EN 13165 : 2008 ; Thermal insulation products for buildings. Factory made rigid polyurethane foam (PUR) products. Specification.
EN 13165 : 2012+A2 : 2016 ; Thermal insulation products for buildings. Factory made rigid polyurethane foam (PU) products. Specification.
EN 13166 : 2008 ; Thermal insulation products for buildings. Factory made products of phenolic foam (PF). Specification.
EN 13166 : 2012+A2 : 2016 ; Thermal insulation products for buildings. Factory made phenolic foam (PF) products. Specification.
EN 13167 : 2008 ; Thermal insulation products for buildings. Factory made cellular glass (CG) products. Specification.
EN 13167 : 2012+A1 : 2015 ; Thermal insulation products for buildings. Factory made cellular glass (CG) products. Specification.
EN 13168 : 2008 ; Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification.
EN 13168 : 2012+A1 : 2015 ; Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification.
EN 13169 : 2008 ; Thermal insulation products for buildings. Factory made products of expanded perlite (EPB). Specification.
EN 13169 : 2012+A1 : 2015 ; Thermal insulation products for buildings. Factory made expanded perlite board (EPB) products. Specification.
EN 13170 : 2008 ; Thermal insulation products for buildings. Factory made products of expanded cork (ICB). Specification.
EN 13170 : 2012+A1 : 2015 ; Thermal insulation products for buildings. Factory made products of expanded cork (ICB). Specification.
EN 13171 : 2008 ; Thermal insulating products for buildings. Factory made wood fibre (WF) products. Specification.
EN 13171 : 2012+A1 : 2015 ; Thermal insulation products for buildings. Factory made wood fibre (WF) products. Specification.
EN 13172 : 2008 ; Thermal insulating products. Evaluation of conformity.
EN 13172 : 2012 ; Thermal insulation products. Evaluation of conformity.
EN 13175 : 2014 ; LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings.
EN 13176 : 2000 ; Chemicals used for treatment of water intended for human consumption. Ethanol.
EN 13176 : 2008 ; Chemicals used for treatment of water intended for human consumption. Ethanol.
EN 13176 : 2015 ; Chemicals used for treatment of water intended for human consumption. Ethanol.
EN 13177 : 2010 ; Chemicals used for treatment of water intended for human consumption. Methanol.
EN 13178 : 2000 ; Personal eye protection. Eye protectors for snowmobile users.
EN 13179-1 : 2013 ; Tests for filler aggregate used in bituminous mixtures. Delta ring and ball test
EN 13179-2 : 2000 ; Test for filler aggregate used in bituminous mixtures. Bitumen number
EN 13183-3 : 2005 ; Moisture content of a piece of sawn timber. Estimation by capacitance method
EN 13184 : 2001 ; Non-destructive testing. Leak testing. Pressure change method.
EN 13185 : 2001 ; Non-destructive testing. Leak testing. Tracer gas method.
EN 13186 : 2004 ; Feather and down. Specification feather and down filled bedding articles.
EN 13187 : 1999 ; Thermal performance of buildings. Qualitative detection of thermal irregularities in building envelopes. Infrared method.
EN 13191-1 : 2000 ; Non-fatty food. Determination of bromide residues. Determination of total bromide as inorganic bromide
EN 13191-2 : 2000 ; Non-fatty food. Determination of bromide residues. Determination of inorganic bromide
EN 13193 : 2000 ; Packaging. Packaging and the environment. Terminology.
EN 13194 : 2000 ; Chemicals used for treatment of water intended for human consumption. Acetic acid.
EN 13194 : 2008 ; Chemicals used for treatment of water intended for human consumption. Acetic acid.
EN 13194 : 2015 ; Chemicals used for treatment of water intended for human consumption. Acetic Acid.
EN 13195 : 2009 ; Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore).
EN 13195 : 2013 ; Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore).
EN 13196 : 2000 ; Fruit and vegetable juices. Determination of total sulfur dioxide by distillation.
EN 13197 : 2011+A1 : 2014 ; Road marking materials. Wear simulator Turntable.
EN 13199-1 : 2000 ; Packaging. Small load carrier systems. Common requirements and test methods
EN 13199-2 : 2000 ; Packaging. Small load carrier systems. Column Stackable System (CSS)
EN 13199-3 : 2000 ; Packaging. Small load carrier systems. Bond Stackable System (BSS)
EN 13200-1 : 2012 ; Spectator facilities. General characteristics for spectator viewing area
EN 13200-3 : 2005 ; Spectator facilities. Separating elements. Requirements
EN 13200-4 : 2006 ; Spectator facilities. Seats. Product characteristics
EN 13200-6 : 2006 ; Spectator facilities. Demountable (temporary) stands
EN 13200-6 : 2012 ; Spectator facilities. Demountable (temporary) stands
EN 13200-7 : 2014 ; Spectator facilities. Entry and exit elements and routes
EN 13201-3 : 2015 ; Road lighting. Calculation of performance
EN 13201-4 : 2015 ; Road lighting. Methods of measuring lighting performance
EN 13201-5 : 2015 ; Road lighting. Energy performance indicators
EN 13202 : 2000 ; Ergonomics of the thermal environment. Temperatures of touchable hot surfaces. Guidance for establishing surface temperature limit values in product standards with the aid of EN 563 ;
EN 13203-1 : 2006 ; Gas-fired domestic appliances producing hot water. Appliances not exceeding 70 kW heat input and 300 l water storage capacity. Assessment of performance of hot water deliveries
EN 13203-1 : 2015 ; Gas fired domestic appliances producing hot water. Assessment of performance of hot water deliveries
EN 13203-2 : 2006 ; Gas-fired domestic appliances producing hot water. Appliances not exceeding 70 kW heat input and 300 l water storage capacity. Assessment of energy consumption
EN 13203-2 : 2015 ; Gas-fired domestic appliances producing hot water. Assessment of energy consumption
EN 13203-3 : 2010 ; Solar supported gas-fired domestic appliances producing hot water. Appliances not exceeding 70 kW heat input and 500 litres water storage capacity. Assessment of energy consumption
EN 13203-4 : 2016 ; Gas-fired domestic appliances producing hot water. Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity
EN 13204 : 2004+A1 : 2012 ; Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements.
EN 13204 : 2016 ; Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements.
EN 13205-1 : 2014 ; Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. General requirements
EN 13205-2 : 2014 ; Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on determination of sampling efficiency
EN 13205-4 : 2014 ; Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
EN 13205-5 : 2014 ; Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Aerosol sampler performance test and sampler comparison carried out at workplaces
EN 13205-6 : 2014 ; Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Transport and handling tests
EN 13206 : 2001 ; Covering thermoplastic films for use in agriculture and horticulture.
EN 13209-2 : 2005 ; Child use and care articles. Baby carriers. Safety requirements and test methods. Soft carrier
EN 13209-2 : 2015 ; Child use and care articles. Baby carriers. Safety requirements and test methods. Soft carrier
EN 13212 : 2011 ; Road marking materials. Requirements for factory production control.
EN 13214 : 2001 ; Thermal spraying. Thermal spray coordination. Tasks and responsibilities.
EN 13215 : 2000 ; Condensing units for refrigeration. Rating conditions, tolerances and presentation of manufacturer’s performance data.
EN 13215 : 2016 ; Condensing units for refrigeration. Rating conditions, tolerances and presentation of manufacturer’s performance data.
EN 13219 : 2008 ; Gymnastic equipment. Trampolines. Functional and safety requirements, test methods.
EN 13220 : 1999 ; Flow-metering devices for connection to terminal units of medical gas pipeline systems.
EN 13221 : 2000 ; High-pressure flexible connections for use with medical gases.
EN 13224 : 2011 ; Precast concrete products. Ribbed floor elements.
EN 13225 : 2013 ; Precast concrete products. Linear structural elements.
EN 13226 : 2009 ; Wood flooring. Solid parquet elements with grooves and/or tongues.
EN 13228 : 2011 ; Wood flooring. Solid wood overlay flooring elements including blocks with an interlocking system.
EN 13230-1 : 2009 ; Railway applications. Track. Concrete sleepers and bearers. General requirements
EN 13230-1 : 2016 ; Railway applications. Track. Concrete sleepers and bearers. General requirements
EN 13230-2 : 2009 ; Railway applications. Track. Concrete sleepers and bearers. Prestressed monoblock sleepers
EN 13230-2 : 2016 ; Railway applications. Track. Concrete sleepers and bearers. Prestressed monoblock sleepers
EN 13230-3 : 2009 ; Railway applications. Track. Concrete sleepers and bearers. Twin-block reinforced sleepers
EN 13230-3 : 2016 ; Railway applications. Track. Concrete sleepers and bearers. Twin-block reinforced sleepers
EN 13230-4 : 2009 ; Railway applications. Track. Concrete sleepers and bearers. Prestressed bearers for switches and crossings
EN 13230-4 : 2016 ; Railway applications. Track. Concrete sleepers and bearers. Prestressed bearers for switches and crossings
EN 13230-5 : 2009 ; Railway applications. Track. Concrete sleepers and bearers. Special elements
EN 13230-5 : 2016 ; Railway applications. Track. Concrete sleepers and bearers. Special elements
EN 13231-1 : 2006 ; Railway applications. Track. Acceptance of works. Works on ballasted track. Plain line
EN 13231-1 : 2013 ; Railway applications. Track. Acceptance of works. Works on ballasted track. Plain line, switches and crossings
EN 13231-2 : 2006 ; Railway applications. Track. Acceptance of works. Works on ballasted track. Switches and crossings
EN 13231-3 : 2006 ; Railway applications. Track. Acceptance of works. Acceptance of rail grinding, milling and planing works in track
EN 13231-3 : 2012 ; Railway applications. Track. Acceptance of works. Acceptance of reprofiling rails in track
EN 13231-4 : 2013 ; Railway applications. Track. Acceptance of works. Acceptance of reprofiling rails in switches and crossings
EN 13232-4 : 2005+A1 : 2011 ; Railway applications. Track. Switches and crossings. Actuation, locking and detection
EN 13232-5 : 2005+A1 : 2011 ; Railway applications. Track. Switches and crossings. Switches
EN 13232-6 : 2005+A1 : 2011 ; Railway applications. Track. Switches and crossings. Fixed common and obtuse crossings
EN 13232-7 : 2006+A1 : 2011 ; Railway applications. Track. Switches and crossings. Crossings with moveable parts
EN 13232-8 : 2007+A1 : 2011 ; Railway applications. Track. Switches and crossings. Expansion devices
EN 13232-9 : 2006+A1 : 2011 ; Railway applications. Track. Switches and crossings. Layouts
EN 13234 : 2006 ; Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Evaluation of the resistance to crack propagation by notch sensitivity testing.
EN 13235 : 2006 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour.
EN 13236 : 2010+A1 : 2015 ; Safety requirements for superabrasive products.
EN 13237 : 2012 ; Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres.
EN 13242 : 2013 ; Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction.
EN 13243 : 2015 ; Safety requirements for cableway installations designed to carry persons. Electrical equipment other than for drive systems.
EN 13245-1 : 2010 ; Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Designation of PVC-U profiles
EN 13245-2 : 2008 ; Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13245-3 : 2010 ; Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications. Designation of PVC-UE profiles
EN 13247 : 2001 ; Packaging. Specification for tensional strapping for lifting, lashing and securing of loads.
EN 13249 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion).
EN 13249 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion).
EN 13249 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion).
EN 13250 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways.
EN 13250 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways.
EN 13250 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways.
EN 13251 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures.
EN 13251 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures.
EN 13251 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures.
EN 13252 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in drainage systems.
EN 13252 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in drainage systems.
EN 13252 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in drainage systems.
EN 13253 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments).
EN 13253 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments).
EN 13253 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments).
EN 13254 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of reservoirs and dams.
EN 13254 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of reservoirs and dams.
EN 13254 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for the use in the construction of reservoirs and dams.
EN 13255 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals.
EN 13255 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals.
EN 13255 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals.
EN 13256 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures.
EN 13256 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures.
EN 13256 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures.
EN 13257 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals.
EN 13257 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals.
EN 13257 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals.
EN 13260 : 2009+A1 : 2010 ; Railway applications. Wheelsets and bogies. Wheelsets. Product requirements.
EN 13261 : 2009+A1 : 2010 ; Railway applications. Wheelsets and bogies. Axles. Product requirements.
EN 13263-1 : 2005+A1 : 2009 ; Silica fume for concrete. Definitions, requirements and conformity criteria
EN 13263-2 : 2005+A1 : 2009 ; Silica fume for concrete. Conformity evaluation
EN 13265 : 2001 ; Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects.
EN 13265 : 2014+A1 : 2015 ; Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects.
EN 13265 : 2016 ; Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects.
EN 13269 : 2006 ; Maintenance. Guideline on preparation of maintenance contracts .
EN 13269 : 2016 ; Maintenance. Guideline on preparation of maintenance contracts.
EN 13272 : 2012 ; Railway applications. Electrical lighting for rolling stock in public transport systems.
EN 13274-1 : 2001 ; Respiratory protective devices. Methods of test. Determination of inward leakage and total inward leakage
EN 13274-2 : 2001 ; Respiratory protective devices. Methods of test. Practical performance tests
EN 13274-7 : 2008 ; Respiratory protective devices. Methods of test. Determination of particle filter penetration
EN 13275 : 2000 ; Cryogenic vessels. Pumps for cryogenic service.
EN 13277-1 : 2000 ; Protective equipment for martial arts. General requirements and test methods
EN 13277-2 : 2000 ; Protective equipment for martial arts. Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
EN 13277-3 : 2013 ; Protective equipment for martial arts. Additional requirements and test methods for trunk protectors
EN 13277-7 : 2009 ; Protective equipment for martial arts. Additional requirements and test methods for hand and foot protectors
EN 13278 : 2013 ; Open fronted gas-fired independent space heaters.
EN 13279-1 : 2005 ; Gypsum binders and gypsum plasters. Definitions and requirements
EN 13279-1 : 2008 ; Gypsum binders and gypsum plasters. Definitions and requirements
EN 13279-2 : 2014 ; Gypsum binders and gypsum plasters. Test methods
EN 13281 : 2000 ; Inland navigation vessels. Safety requirements for walkways and working places.
EN 13282-1 : 2013 ; Hydraulic road binders. Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria
EN 13282-2 : 2015 ; Hydraulic road binders. Normal hardening hydraulic road binders. Composition, specifications and conformity criteria
EN 13282-3 : 2013 ; Hydraulic road binders. Conformity evaluation
EN 13282-3 : 2015 ; Hydraulic road binders. Conformity evaluation
EN 13284-2 : 2004 ; Stationary source emissions. Determination of low range mass concentration of dust. Automated measuring systems
EN 13286-2 : 2010 ; Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
EN 13286-47 : 2012 ; Unbound and hydraulically bound mixtures. Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
EN 13286-48 : 2005 ; Unbound and hydraulically bound mixtures. Test method for the determination of degree of pulverisation
EN 13286-50 : 2004 ; Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
EN 13286-51 : 2004 ; Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
EN 13286-52 : 2004 ; Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression
EN 13286-53 : 2004 ; Unbound and hydraulically bound mixtures. Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression
EN 13288 : 2005+A1 : 2009 ; Food processing machinery. Bowl lifting and tilting machines. Safety and hygiene requirements.
EN 13290-1 : 1999 ; Space project management. General requirements. Policy and principles
EN 13291-1 : 1999 ; Space products assurance. General requirements. Policy and principles
EN 13292 : 1999 ; Space engineering standards. Policy and principles.
EN 13297 : 2007 ; Textile floor coverings. Classification of needled pile floor coverings.
EN 13301 : 2010 ; Bitumen and bituminous binders. Determination of staining tendency of bitumen.
EN 13302 : 2010 ; Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus.
EN 13303 : 2009 ; Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen.
EN 13304 : 2009 ; Bitumen and bituminous binders. Framework for specification of oxidised bitumen.
EN 13305 : 2009 ; Bitumen and bituminous binders. Framework for specification of hard industrial bitumens.
EN 13307-1 : 2006 ; Timber blanks and semi-finished profiles for non-structural uses. Requirements
EN 13309 : 2000 ; Construction machinery. Electromagnetic compatibility of machines with internal electrical power supply.
EN 13309 : 2010 ; Construction machinery. Electromagnetic compatibility of machines with internal power supply.
EN 13311-1 : 2001 ; Biotechnology. Performance criteria for vessels. General performance criteria
EN 13311-2 : 2001 ; Biotechnology. Performance criteria for vessels. Pressure protection devices
EN 13311-3 : 2001 ; Biotechnology. Performance criteria for vessels. Glass pressure vessels
EN 13311-4 : 2001 ; Biotechnology. Performance criteria for vessels. Bioreactors
EN 13311-5 : 2001 ; Biotechnology. Performance criteria for vessels. Kill tanks
EN 13311-6 : 2001 ; Biotechnology. Performance criteria for vessels. Chromatography columns
EN 13312-1 : 2001 ; Biotechnology. Performance criteria for piping and instrumentation. General performance criteria
EN 13312-2 : 2001 ; Biotechnology. Performance criteria for piping and instrumentation. Couplings
EN 13312-3 : 2001 ; Biotechnology. Performance criteria for piping and instrumentation. Sampling and inoculation devices
EN 13312-4 : 2001 ; Biotechnology. Performance criteria for piping and instrumentation. Tubes and pipes
EN 13312-5 : 2001 ; Biotechnology. Performance criteria for piping and instrumentation. Valves
EN 13312-6 : 2001 ; Biotechnology. Performance criteria for piping and instrumentation. Equipment probes
EN 13313 : 2010 ; Refrigerating systems and heat pumps. Competence of personnel.
EN 13319 : 2000 ; Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods.
EN 13321-1 : 2006 ; Open data communication in building automation, controls and building management. Home and building electronic system. Product and system requirements
EN 13321-1 : 2012 ; Open data communication in building automation, controls and building management. Home and building electronic system. Product and system requirements
EN 13321-2 : 2006 ; Open data communication in building automation, controls and building management. Home and building electronic systems. KNXnet/IP Communication
EN 13321-2 : 2012 ; Open Data Communication in Building Automation, Controls and Building Management. Home and Building Electronic Systems. KNXnet/IP Communication
EN 13329 : 2000 ; Laminate floor coverings. Specifications, requirements and test methods.
EN 13329 : 2006+A1 : 2008 ; Laminate floor coverings. Elements with a surface layer based on aminoplastic thermosetting resins. Specifications, requirements and test methods.
EN 13329 : 2016 ; Laminate floor coverings. Elements with a surface layer based on aminoplastic thermosetting resins. Specifications, requirements and test methods.
EN 13330 : 2013 ; Shutters. Hard body impact and prevention of access. Test methods.
EN 13336 : 2012 ; Leather. Upholstery leather characteristics. Guide for selection of leather for furniture.
EN 13341 : 2005+A1 : 2011 ; Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels. Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 ; Requirements and test methods.
EN 13346 : 2000 ; Characterization of sludges. Determination of trace elements and phosphorous. Aqua regia extraction methods.
EN 13348 : 2008 ; Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum.
EN 13348 : 2016 ; Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum.
EN 13352 : 2012 ; Specification for the performance of automatic tank contents gauges.
EN 13353 : 2008+A1 : 2011 ; Solid wood panels (SWP). Requirements.
EN 13354 : 2008 ; Solid wood panels (SWP). Bonding quality. Test method.
EN 13355 : 2004+A1 : 2009 ; Coating plants. Combined booths. Safety requirements.
EN 13358 : 2010 ; Bitumen and bituminous binders. Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes.
EN 13361 : 2013 ; Geosynthetic barriers. Characteristics required for use in the construction of reservoirs and dams.
EN 13362 : 2005 ; Geosynthetic barriers. Characteristics required for use in the construction of canals.
EN 13362 : 2013 ; Geosynthetic barriers. Characteristics required for use in the construction of canals.
EN 13363-2 : 2005 ; Solar protection devices combined with glazing. Calculation of total solar energy transmittance and light transmittance. Detailed calculation method
EN 13366 : 2001 ; Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients.
EN 13367 : 2005+A1 : 2008 ; Ceramic machines. Safety. Transfer platforms and cars.
EN 13368-1 : 2001 ; Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDTA, HEDTA and DTPA
EN 13368-1 : 2014 ; Fertilizers. Determination of chelating agents in fertilizers by chromatography. Determination of EDTA, HEEDTA and DTPA by ion chromatography
EN 13368-2 : 2001 ; Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDDHA and EDDHMA
EN 13368-2 : 2007 ; Fertilizers. Determination of chelating agents in fertilizers by chromatography. Determination of Fe chelated by o,o-EDDHA and o,o-EDDHMA by ion pair chromatography
EN 13368-2 : 2012 ; Fertilizers. Determination of chelating agents in fertilizers by chromatography. Determination of Fe chelated by o,o-EDDHA, o,o-EDDHMA and HBED by ion pair chromatography
EN 13369 : 2013 ; Common rules for precast concrete products.
EN 13374 : 2013 ; Temporary edge protection systems. Product specification. Test methods.
EN 13375 : 2004 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation.
EN 13381-1 : 2014 ; Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
EN 13381-2 : 2014 ; Test methods for determining the contribution to the fire resistance of structural members. Vertical protective membranes
EN 13381-3 : 2015 ; Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete members
EN 13381-4 : 2013 ; Test methods for determining the contribution to the fire resistance of structural members. Applied passive protection products to steel members
EN 13381-5 : 2014 ; Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete/profiled sheet steel composite member
EN 13381-6 : 2012 ; Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete filled hollow steel columns
EN 13381-8 : 2010 ; Test methods for determining the contribution to the fire resistance of structural members. Applied reactive protection to steel members
EN 13381-8 : 2013 ; Test methods for determining the contribution to the fire resistance of structural members. Applied reactive protection to steel members
EN 13381-9 : 2015 ; Test methods for determining the contribution to the fire resistance of structural members. Applied fire protection systems to steel beams with web openings
EN 13384-1 : 2015 ; Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving one heating appliance
EN 13384-2 : 2015 ; Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving more than one heating appliance
EN 13384-3 : 2005 ; Chimneys. Thermal and fluid dynamic calculation methods. Methods for the development of diagrams and tables for chimneys serving one heating appliance
EN 13389 : 2005+A1 : 2009 ; Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
EN 13398 : 2010 ; Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen.
EN 13399 : 2010 ; Bitumen and bituminous binders. Determination of storage stability of modified bitumen.
EN 13401 : 1999 ; Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of Clostridium perfringens. Colony count technique.
EN 13402-1 : 2001 ; Size designation of clothes. Terms, definitions and body measurement procedure
EN 13402-3 : 2004 ; Size designation of clothes. Measurements and intervals
EN 13402-3 : 2013 ; Size designation of clothes. Body measurements and intervals
EN 13407 : 2006 ; Wall-hung urinals. Functional requirements and test methods.
EN 13411-4 : 2011 ; Terminations for steel wire ropes. Safety. Metal and resin socketing
EN 13411-7 : 2006+A1 : 2008 ; Terminations for steel wire ropes. Safety. Symmetric wedge socket
EN 13411-8 : 2011 ; Terminations for steel wire ropes. Safety. Swage terminals and swaging
EN 13412 : 2006 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression.
EN 13415 : 2010 ; Test of adhesives for floor covering. Determination of the electrical resistance of adhesive films and composites.
EN 13418 : 2013 ; Plastics and rubber machines. Winding machines for film or sheet. Safety requirements.
EN 13420 : 2011 ; Windows. Behaviour between different climates. Test method.
EN 13421 : 2006 ; Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites.
EN 13427 : 2000 ; Packaging. Requirements for the use of European Standards in the field of packaging and packaging waste.
EN 13428 : 2000 ; Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction.
EN 13430 : 2000 ; Packaging. Requirements for packaging recoverable by material recycling.
EN 13431 : 2000 ; Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value.
EN 13433 : 2007 ; Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A.
EN 13434 : 2006 ; Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B.
EN 13438 : 2005 ; Paints and varnishes. Powder organic coatings for galvanized or sherardised steel products for construction purposes.
EN 13438 : 2013 ; Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes.
EN 13442 : 2013 ; Wood flooring and wood panelling and cladding. Determination of the resistance to chemical agents.
EN 13443-2 : 2005+A1 : 2007 ; Water conditioning equipment inside buildings. Mechanical filters. Particle rating 1 $Gmm to less than 80 $Gmm. Requirements for performance, safety and testing
EN 13445-1 : 2014+A1 : 2014 ; Unfired pressure vessels. General
EN 13445-2 : 2009+A2 : 2012 ; Unfired pressure vessels. Materials
EN 13445-4 : 2009+A1 : 2011 ; Unfired pressure vessels. Fabrication
EN 13445-4 : 2014+A1 : 2016 ; Unfired pressure vessels. Fabrication
EN 13445-5 : 2009+A4 : 2013 ; Unfired pressure vessels. Inspection and testing
EN 13445-5 : 2014 ; Unfired pressure vessels. Inspection and testing
EN 13445-6 : 2009 ; Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
EN 13445-6 : 2014+A1 : 2015 ; Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
EN 13445-8 : 2006 ; Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
EN 13445-8 : 2009 ; Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
EN 13445-8 : 2014+A1 : 2014 ; Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
EN 13445-10 : 2015 ; Unfired pressure vessels. Additional requirements for pressure vessels of nickel and nickel alloys
EN 13451-1 : 2001 ; Swimming pool equipment. General safety requirements and test methods
EN 13451-1 : 2011+A1 : 2016 ; Swimming pool equipment. General safety requirements and test methods
EN 13451-2 : 2001 ; Swimming pool equipment. Additional specific safety requirements and test methods for ladders, stepladders and handle bends
EN 13451-2 : 2015 ; Swimming pool equipment. Additional specific safety requirements and test methods for ladders, stepladders and handle bends
EN 13451-3 : 2001 ; Swimming pool equipment. Additional specific safety requirements and test methods for pool fittings for water treatment purposes
EN 13451-3 : 2011+A3 : 2016 ; Swimming pool equipment. Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
EN 13451-4 : 2001 ; Swimming pool equipment. Additional specific safety requirements and test methods for starting platforms
EN 13451-4 : 2014 ; Swimming pool equipment. Additional specific safety requirements and test methods for starting platforms
EN 13451-5 : 2001 ; Swimming pool equipment. Additional specific safety requirements and test methods for lane lines
EN 13451-5 : 2014 ; Swimming pool equipment. Additional specific safety requirements and test methods for lane lines and dividing line
EN 13451-6 : 2001 ; Swimming pool equipment. Additional specific safety requirements and test methods for turning boards
EN 13451-7 : 2001 ; Swimming pool equipment. Additional specific safety requirements and test methods for water polo goals
EN 13451-8 : 2001 ; Swimming pool equipment. Additional specific safety requirements and test methods for leisure water features
EN 13451-10 : 2014 ; Swimming pool equipment. Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
EN 13451-11 : 2014 ; Swimming pool equipment. Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
EN 13459 : 2011 ; Road marking materials. Sampling from storage and testing.
EN 13461 : 2001 ; Packaging. Cylindrical flexible laminated tubes. Dimensions and tolerances.
EN 13461 : 2009 ; Packaging. Cylindrical flexible laminated tubes. Dimensions and tolerances.
EN 13463-1 : 2009 ; Non-electrical equipment for use in potentially explosive atmospheres. Basic method and requirements
EN 13463-2 : 2004 ; Non-electrical equipment for use in potentially explosive atmospheres. Protection by flow restricting enclosure “fr”
EN 13463-3 : 2005 ; Non-electrical equipment for use in potentially explosive atmospheres. Protection by flameproof enclosure ‘d’
EN 13463-5 : 2011 ; Non-electrical equipment intended for use in potentially explosive atmospheres. Protection by constructional safety ‘c’
EN 13463-6 : 2005 ; Non-electrical equipment for potentially explosive atmospheres. Protection by control of ignition source ‘b’
EN 13469 : 2012 ; Thermal insulating products for building equipment and industrial installations. Determination of water vapour transmission properties of preformed pipe insulation.
EN 13472 : 2012 ; Thermal insulating products for building equipment and industrial installations. Determination of short term water absorption by partial immersion of preformed pipe insulation.
EN 13476-1 : 2007 ; Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). General requirements and performance characteristics
EN 13476-2 : 2007 ; Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
EN 13476-3 : 2007+A1 : 2009 ; Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
EN 13477-1 : 2001 ; Non-destructive testing. Acoustic emission. Equipment characterization. Equipment description
EN 13477-2 : 2001 ; Non-destructive testing. Acoustic emission. Equipment characterization. Verification of operating characteristic
EN 13477-2 : 2010 ; Non-destructive testing. Acoustic emission. Equipment characterisation. Verification of operating characteristic
EN 13479 : 2004 ; Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials.
EN 13480-2 : 2012+A2 : 2016 ; Metallic industrial piping. Materials
EN 13480-3 : 2012 ; Metal industrial piping. Design and calculation
EN 13480-4 : 2012+A3 : 2016 ; Metallic industrial piping. Fabrication and installation
EN 13480-5 : 2012+A1 : 2013 ; Metallic industrial piping. Inspection and testing
EN 13480-6 : 2012+A1 : 2016 ; Metallic industrial piping. Additional requirements for buried piping
EN 13480-8 : 2007 ; Metallic industrial piping. Additional requirements for aluminium and aluminium alloy piping
EN 13480-8 : 2012+A2 : 2015 ; Metallic industrial piping. Additional requirements for aluminium and aluminium alloy piping
EN 13481-1 : 2012 ; Railway applications. Track. Performance requirements for fastening systems. Definitions
EN 13481-2 : 2012 ; Railway applications. Track. Performance requirements for fastening systems. Fastening systems for concrete sleepers
EN 13481-3 : 2012 ; Railway applications. Track. Performance requirements for fastening systems. Fastening systems for wood sleepers
EN 13481-4 : 2012 ; Railway applications. Track. Performance requirements for fastening systems. Fastening systems for steel sleepers
EN 13481-5 : 2012 ; Railway applications. Track. Performance requirements for fastening systems. Fastening systems for slab track with rail on the surface or rail embedded in a channel
EN 13481-7 : 2012 ; Railway applications. Track. Performance requirements for fastening systems. Special fastening systems for switches and crossings and check rails
EN 13481-8 : 2006 ; Railway applications. Track. Performance requirements for fastening systems. Fastening systems for track with heavy axle loads
EN 13482 : 2013 ; Rubber hoses and hose assemblies for asphalt and bitumen. Specification.
EN 13483 : 2005 ; Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification.
EN 13483 : 2013 ; Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification.
EN 13491 : 2013 ; Geosynthetic barriers. Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures.
EN 13492 : 2004 ; Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment.
EN 13492 : 2013 ; Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment.
EN 13493 : 2005 ; Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites.
EN 13493 : 2013 ; Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites.
EN 13496 : 2013 ; Thermal insulation products for building applications. Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS).
EN 13501-1 : 2007+A1 : 2009 ; Fire classification of construction products and building elements. Classification using test data from reaction to fire tests
EN 13501-2 : 2007+A1 : 2009 ; Fire classification of construction products and building elements. Classification using data from fire resistance tests, excluding ventilation services
EN 13501-2 : 2016 ; Fire classification of construction products and building elements. Classification using data from fire resistance tests, excluding ventilation services
EN 13501-3 : 2005+A1 : 2009 ; Fire classification of construction products and building elements. Classification using data from fire resistance tests on products and elements used in building service installations : fire resisting ducts and fire dampers
EN 13501-4 : 2007+A1 : 2009 ; Fire classification of construction products and building elements. Classification using data from fire resistance tests on components of smoke control systems
EN 13501-4 : 2016 ; Fire classification of construction products and building elements. Classification using data from fire resistance tests on components of smoke control systems
EN 13501-5 : 2005+A1 : 2009 ; Fire classification of construction products and building elements. Classification using data from external fire exposure to roofs tests
EN 13501-5 : 2016 ; Fire classification of construction products and building elements. Classification using data from external fire exposure to roofs tests
EN 13501-6 : 2014 ; Fire classification of construction products and building elements. Classification using data from reaction to fire tests on electric cables
EN 13503-5 : 2001 ; Ophthalmic implants. Intraocular lenses. Biocompatibility
EN 13503-8 : 2000 ; Ophthalmic implants. Intraocular lenses. Fundamental requirements
EN 13507 : 2001 ; Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying.
EN 13507 : 2010 ; Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying.
EN 13508-1 : 2012 ; Investigation and assessment of drain and sewer systems outside buildings. General Requirements
EN 13508-2 : 2003+A1 : 2011 ; Investigation and assessment of drain and sewer systems outside buildings. Visual inspection coding system
EN 13523-0 : 2001 ; Coil coated metals. Test methods. General introduction and list of test methods
EN 13523-0 : 2014 ; Coil coated metals. Test methods. General introduction
EN 13523-1 : 2001 ; Coil coated metals. Test methods. Coating thickness
EN 13523-1 : 2009 ; Coil coated metals. Test methods. Film thickness
EN 13523-2 : 2001 ; Coil coated metals. Test methods. Specular gloss
EN 13523-3 : 2001 ; Coil coated metals. Test methods. Colour difference. Instrumental comparison
EN 13523-3 : 2014 ; Coil coated metals. Test methods. Colour difference. Instrumental comparison
EN 13523-4 : 2001 ; Coil coated metals. Test methods. Pencil hardness
EN 13523-4 : 2014 ; Coil coated metals. Test methods. Pencil hardness
EN 13523-5 : 2001 ; Coil coated metals. Test methods. Resistance to rapid deformation (impact test)
EN 13523-5 : 2014 ; Coil coated metals. Test methods. Resistance to rapid deformation (impact test)
EN 13523-7 : 2001 ; Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
EN 13523-7 : 2014 ; Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
EN 13523-8 : 2010 ; Coil coated metals. Test methods. Resistance to salt spray (fog)
EN 13523-9 : 2014 ; Coil coated metals. Test methods. Resistance to water immersion
EN 13523-10 : 2001 ; Coil coated metals. Test methods. Resistance to fluorescent UV light and water condensation
EN 13523-10 : 2010 ; Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation
EN 13523-11 : 2011 ; Coil coated metals. Test methods. Resistance to solvents (rubbing test)
EN 13523-13 : 2014 ; Coil coated metals. Test methods. Resistance to accelerated ageing by the use of heat
EN 13523-14 : 2014 ; Coil coated metals. Test methods. Chalking (Helmen method)
EN 13523-17 : 2011 ; Coil coated metals. Test methods. Adhesion of strippable films
EN 13523-19 : 2011 ; Coil coated metals. Test methods. Panel design and method of atmospheric exposure testing
EN 13523-20 : 2011 ; Coil coated metals. Test methods. Foam adhesion
EN 13523-21 : 2010 ; Coil coated metals. Test methods. Evaluation of outdoor exposed panels
EN 13523-22 : 2010 ; Coil coated metals. Test methods. Colour difference. Visual comparison
EN 13523-23 : 2015 ; Coil coated metals. Test methods. Resistance to humid atmospheres containing sulfur dioxide
EN 13523-25 : 2006 ; Coil coated metals. Test methods. Resistance to humidity
EN 13523-25 : 2014 ; Coil coated metals. Test methods. Resistance to humidity
EN 13523-26 : 2006 ; Coil coated metals. Test methods. Resistance to condensation of water
EN 13523-26 : 2014 ; Coil coated metals. Test methods. Resistance to condensation of water
EN 13523-27 : 2009 ; Coil coated metals. Test methods. Resistance to humid poultice (Cataplasm test)
EN 13523-29 : 2010 ; Coil coated metals. Test methods. Resistance to environmental soiling (Dirt pick-up and striping)
EN 13525 : 2005+A2 : 2009 ; Forestry machinery. Wood chippers. Safety.
EN 13527 : 2000 ; Shutters and blinds. Measurement of operating force. Test methods.
EN 13534 : 2006+A1 : 2010 ; Food processing machinery. Curing injection machines. Safety and hygiene requirements.
EN 13535 : 2001 ; Fertilizers and liming materials. Classification.
EN 13538-3 : 2016 ; Determination of dimensional characteristics of sleeping bags. Volume under load and easiness of packing
EN 13541 : 2001 ; Glass in building. Security glazing. Testing and classification of resistance against explosion pressure.
EN 13541 : 2012 ; Glass in building. Security glazing. Testing and classification of resistance against explosion pressure.
EN 13544-1 : 2007+A1 : 2009 ; Respiratory therapy equipment. Nebulizing systems and their components
EN 13547 : 2013 ; Industrial valves. Copper alloy ball valves.
EN 13553 : 2015 ; Resilient floor coverings. Polyvinyl chloride floor coverings for use in special wet areas. Specification.
EN 13554 : 2011 ; Non-destructive testing. Acoustic emission testing. General principles.
EN 13555 : 2014 ; Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections.
EN 13561 : 2015 ; External blinds and awnings. Performance requirements including safety.
EN 13562 : 2000 ; Geotextiles and geotextile-related products. Determination of resistance to penetration by water (hydrostatic pressure test).
EN 13565-2 : 2009 ; Fixed firefighting systems. Foam systems. Design, construction and maintenance
EN 13566-2 : 2005 ; Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with continuous pipes
EN 13566-7 : 2007 ; Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with spirally-wound pipes
EN 13570 : 2005+A1 : 2010 ; Food processing machinery. Mixing machines. Safety and hygiene requirements.
EN 13573 : 2009 ; Inland navigation vessels. Anchoring, coupling, towing, hauling and mooring systems.
EN 13575 : 2012 ; Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods.
EN 13577 : 2007 ; Chemical attack on concrete. Determination of aggressive carbon dioxide content in water.
EN 13583 : 2012 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance.
EN 13587 : 2010 ; Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method.
EN 13587 : 2016 ; Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method.
EN 13588 : 2008 ; Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test.
EN 13589 : 2008 ; Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method.
EN 13591 : 2005+A1 : 2009 ; Food processing machinery. Fixed deck oven loaders. Safety and hygiene requirements.
EN 13594 : 2015 ; Protective gloves for motorcycle riders. Requirements and test methods.
EN 13596 : 2004 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of bond strength.
EN 13598-1 : 2010 ; Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for ancillary fittings including shallow inspection chambers
EN 13598-2 : 2009 ; Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for manholes and inspection chambers in traffic areas and deep underground installations
EN 13599 : 2014 ; Copper and copper alloys. Copper plate, sheet and strip for electrical purposes.
EN 13600 : 2013 ; Copper and copper alloys. Seamless copper tubes for electrical purposes.
EN 13601 : 2013 ; Copper and copper alloys. Copper rod, bar and wire for general electrical purposes.
EN 13602 : 2013 ; Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors.
EN 13603 : 2013 ; Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes.
EN 13604 : 2013 ; Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper.
EN 13605 : 2013 ; Copper and copper alloys. Copper profiles and profiled wire for electrical purposes.
EN 13606-1 : 2007 ; Health informatics. Electronic health record communication. Reference model
EN 13606-2 : 2007 ; Health informatics. Electronic health record communication. Archetypes interchange specification
EN 13606-3 : 2008 ; Health informatics. Electronic health record communication. Reference archetypes and term lists
EN 13606-4 : 2007 ; Health informatics. Electronic health record communication. Security
EN 13609-1 : 2005 ; Health informatics. Messages for maintenance of supporting information in healthcare systems. Updating of coding schemes
EN 13611 : 2007+A2 : 2011 ; Safety and control devices for gas burners and gas burning appliances. General requirements.
EN 13611 : 2015 ; Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements.
EN 13613 : 2001 ; Roller sports equipment. Skateboards. Safety requirements and test methods.
EN 13614 : 2011 ; Bitumen and bituminous binders. Determination of adhesivity of bituminous emulsions by water immersion test.
EN 13616-1 : 2016 ; Overfill prevention devices for static tanks for liquid fuels. Overfill prevention devices with closure device
EN 13616-2 : 2016 ; Overfill prevention devices for static tanks for liquid fuels. Overfill prevention devices without a closure device
EN 13617-1 : 2012 ; Petrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
EN 13617-2 : 2012 ; Petrol filling stations. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
EN 13617-3 : 2012 ; Petrol filling stations. Safety requirements for construction and performance of shear valves
EN 13617-4 : 2012 ; Petrol filling stations. Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
EN 13618 : 2011 ; Flexible hose assemblies in drinking water installations. Functional requirements and test methods.
EN 13618 : 2016 ; Flexible hose assemblies in drinking water installations. Functional requirements and test methods.
EN 13623 : 2010 ; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems. Test method and requirements (phase 2, step 1).
EN 13624 : 2013 ; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area. Test method and requirements (phase 2, step 1).
EN 13627 : 2000 ; Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements.
EN 13629 : 2012 ; Wood flooring. Solid individual and pre-assembled hardwood boards.
EN 13630-10 : 2005 ; Explosives for civil uses. Detonating cords and safety fuses. Determination of initiating capability of detonating cords
EN 13631-1 : 2005 ; Explosives for civil uses. High explosives. Requirements
EN 13631-15 : 2005 ; Explosives for civil uses. High explosives. Calculation of thermodynamic properties
EN 13632 : 2010 ; Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen.
EN 13634 : 2010 ; Protective footwear for motorcycle riders. Requirements and test methods.
EN 13634 : 2015 ; Protective footwear for motorcycle riders. Requirements and test methods.
EN 13637 : 2015 ; Building hardware. Electrically controlled exit systems for use on escape routes. Requirements and test methods.
EN 13647 : 2011 ; Wood flooring and wood panelling and cladding. Determination of geometrical characteristics.
EN 13648-1 : 2008 ; Cryogenic vessels. Safety devices for protection against excessive pressure. Safety valves for cryogenic service
EN 13653 : 2004 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of shear strength.
EN 13658-1 : 2005 ; Metal lath and beads. Definitions, requirements and test methods. Internal plastering
EN 13658-2 : 2005 ; Metal lath and beads. Definitions, requirements and test methods. External rendering
EN 13659 : 2015 ; Shutters and external venetian blinds. Performance requirements including safety.
EN 13673-2 : 2005 ; Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum rate of explosion pressure rise
EN 13674-1 : 2011 ; Railway applications. Track. Rail. Vignole railway rails 46 kg/m and above
EN 13674-2 : 2006+A1 : 2010 ; Railway applications. Track. Rail. Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
EN 13674-3 : 2006+A1 : 2010 ; Railway applications. Track. Rail. Check rails
EN 13674-4 : 2006+A1 : 2009 ; Railway applications. Track. Rail. Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
EN 13696 : 2008 ; Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance.
EN 13697 : 2015 ; Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements without mechanical action (phase 2, step 2).
EN 13698-2 : 2009 ; Pallet production specification. Construction specification for 1000 mm x 1200 mm flat wooden pallets
EN 13702 : 2010 ; Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen by cone and plate method.
EN 13707 : 2004+A2 : 2009 ; Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics.
EN 13707 : 2013 ; Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics.
EN 13709 : 2010 ; Industrial valves. Steel globe and globe stop and check valves.
EN 13710 : 2011 ; European Ordering Rules. Ordering of characters from Latin, Greek, Cyrillic, Georgian and Armenian scripts.
EN 13715 : 2006+A1 : 2010 ; Railway applications. Wheelsets and bogies. Wheels. Tread profile.
EN 13718-1 : 2008 ; Medical vehicles and their equipment. Air ambulances. Requirements for medical devices used in air ambulances
EN 13718-1 : 2014 ; Medical vehicles and their equipment. Air ambulances. Requirements for medical devices used in air ambulances
EN 13718-2 : 2008 ; Medical vehicles and their equipment. Air ambulances. Operational and technical requirements of air ambulances
EN 13718-2 : 2015 ; Medical vehicles and their equipment. Air ambulances. Operational and technical requirements for air ambulances
EN 13719 : 2016 ; Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers.
EN 13724 : 2013 ; Postal services. Apertures of private letter boxes and letter plates. Requirements and test methods.
EN 13727 : 2012+A2 : 2015 ; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity in the medical area. Test method and requirements (phase 2, step 1).
EN 13731 : 2007 ; Lifting bag systems for fire and rescue service use. Safety and peformance requirements.
EN 13732 : 2013 ; Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene.
EN 13739-1 : 2011 ; Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection. Requirements
EN 13739-2 : 2011 ; Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection. Test methods
EN 13743 : 2009 ; Safety requirements for coated abrasive products.
EN 13747 : 2005+A2 : 2010 ; Precast concrete products. Floor plates for floor systems.
EN 13749 : 2005 ; Railway applications. Methods of specifying structural requirements of bogie frames.
EN 13749 : 2011 ; Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames.
EN 13751 : 2009 ; Foodstuffs. Detection of irradiated food using photostimulated luminescence.
EN 13752 : 2009 ; Products used for treatment of water intended for human consumption. Manganese dioxide.
EN 13752 : 2012 ; Products used for treatment of water intended for human consumption. Manganese dioxide.
EN 13753 : 2009 ; Products used for treatment of water intended for human consumption. Granular activated alumina.
EN 13754 : 2009 ; Products used for treatment of water intended for human consumption. Bentonite.
EN 13755 : 2008 ; Natural stone test methods. Determination of water absorption at atmospheric pressure.
EN 13757-1 : 2014 ; Communication systems for meters. Data exchange
EN 13757-3 : 2013 ; Communication systems for and remote reading of meters. Dedicated application layer
EN 13757-4 : 2005 ; Communication systems for meters and remote reading of meters. Wireless meter readout (radio meter reading for operation in the 868-870 MHz SRD band)
EN 13757-4 : 2013 ; Communication systems for meters and remote reading of meters . Wireless meter readout (Radio meter reading for operation in SRD bands)
EN 13757-5 : 2008 ; Communication systems for meters and remote reading of meters. Wireless relaying
EN 13757-5 : 2015 ; Communication systems for meters. Wireless M-Bus relaying
EN 13757-6 : 2008 ; Communication systems for meters and remote reading of meters. Local Bus
EN 13759 : 2012 ; Furniture. Operating mechanisms for seating and sofa-beds. Test methods.
EN 13765 : 2010+A1 : 2015 ; Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification.
EN 13766 : 2010 ; Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification.
EN 13771-1 : 2016 ; Compressors and condensing units for refrigeration. Performance testing and test methods. Refrigerant compressors
EN 13771-2 : 2007 ; Compressors and condensing units for refrigeration. Performance testing and test methods. Condensing units
EN 13772 : 2011 ; Textiles and textile products. Burning behaviour. Curtains and drapes. Measurement of flame spread of vertically oriented specimens with large ignition source.
EN 13774 : 2013 ; Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements.
EN 13776 : 2013 ; LPG equipment and accessories. Filling and discharge procedures for LPG road tankers.
EN 13779 : 2004 ; Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems.
EN 13779 : 2007 ; Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems.
EN 13781 : 2012 ; Protective helmets for drivers and passengers of snowmobiles and bobsleighs.
EN 13785 : 2005+A1 : 2008 ; Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures.
EN 13789 : 2010 ; Industrial valves. Cast iron globe valves.
EN 13791 : 2007 ; Assessment of in-situ compressive strength in structures and pre-cast concrete components.
EN 13795-3 : 2006+A1 : 2009 ; Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. Performance requirements and performance levels
EN 13795 : 2011+A1 : 2013 ; Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels.
EN 13796-1 : 2005 ; Safety requirements for cableway installations designed to carry persons. Carriers. Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
EN 13796-2 : 2005 ; Safety requirements for cableway installations designed to carry persons. Carriers. Slipping resistance tests for grips
EN 13796-3 : 2005 ; Safety requirements for cableway installations designed to carry persons. Carriers. Fatigue tests
EN 13798 : 2010 ; Hydrometry. Specification for a reference raingauge pit.
EN 13799 : 2012 ; LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels.
EN 13802 : 2013 ; Railway applications. Suspension components. Hydraulic dampers.
EN 13803-1 : 2010 ; Railway applications. Track. Track alignment design parameters. Track gauges 1435 mm and wider. Plain line
EN 13803-2 : 2006+A1 : 2009 ; Railway applications. Track. Track alignment design parameters. Track gauges 1435 mm and wider. Switches and crossings and comparable alignment design situations with abrupt changes of curvature
EN 13804 : 2013 ; Foodstuffs. Determination of elements and their chemical species. General considerations and specific requirements.
EN 13805 : 2014 ; Foodstuffs. Determination of trace elements. Pressure digestion.
EN 13808 : 2005 ; Bitumen and bituminous binders. Framework for specifying cationic bituminous emulsions.
EN 13808 : 2013 ; Bitumen and bituminous binders. Framework for specifying cationic bituminous emulsions.
EN 13814 : 2004 ; Fairground and amusement park machinery and structures. Safety.
EN 13815 : 2006 ; Fibrous gypsum plaster casts. Definitions, requirements and test methods.
EN 13823 : 2010+A1 : 2014 ; Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item.
EN 13829 : 2001 ; Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method.
EN 13831 : 2007 ; Closed expansion vessels with built-in diaphragm for installation in water.
EN 13832-1 : 2006 ; Footwear protecting against chemicals. Terminology and test methods
EN 13832-2 : 2006 ; Footwear protecting against chemicals. Requirements for footwear resistant to chemicals under laboratory conditions
EN 13832-3 : 2006 ; Footwear protecting against chemicals. Requirements for footwear highly resistant to chemicals under laboratory conditions
EN 13834 : 2007+A1 : 2009 ; Cookware. Ovenware for use in traditional domestic ovens.
EN 13836 : 2006 ; Gas fired central heating boilers. Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW.
EN 13845 : 2005 ; Resilient floor coverings. Polyvinyl chloride floor coverings with particle based enhanced slip resistance. Specification.
EN 13848-2 : 2006 ; Railway applications. Track. Track geometry quality. Measuring systems. Track recording vehicles
EN 13848-3 : 2009 ; Railway applications. Track. Track geometry quality. Measuring systems. Track construction and maintenance machines
EN 13848-4 : 2011 ; Railway applications. Track. Track geometry quality. Measuring systems. Manual and lightweight devices
EN 13848-5 : 2008+A1 : 2010 ; Railway applications. Track. Track geometry quality. Geometric quality levels. Plain line
EN 13848-6 : 2014 ; Railway applications. Track. Track geometry quality. Characterisation of track geometry quality
EN 13850 : 2012 ; Postal Services. Quality of Services. Measurement of the transit time of end-to-end services for single piece priority mail and first class mail.
EN 13852-1 : 2004 ; Cranes. Offshore cranes. General-purpose offshore cranes
EN 13852-1 : 2013 ; Cranes. Offshore cranes. General-purpose offshore cranes
EN 13858 : 2006 ; Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components.
EN 13859-1 : 2005+A1 : 2008 ; Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing
EN 13859-1 : 2010 ; Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing
EN 13859-1 : 2014 ; Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing
EN 13859-2 : 2004+A1 : 2008 ; Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls
EN 13859-2 : 2010 ; Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls
EN 13859-2 : 2014 ; Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls
EN 13861 : 2011 ; Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery.
EN 13863-3 : 2004 ; Concrete pavements. Test methods for the determination of the thickness of a concrete pavement from cores
EN 13863-4 : 2012 ; Concrete pavements. Test methods for the determination of wear resistance of concrete pavements to studded tyres
EN 13869 : 2016 ; Lighters. Child safety requirements for lighters. Safety requirements and test methods.
EN 13870 : 2005+A1 : 2010 ; Food processing machinery. Chop cutting machines. Safety and hygiene requirements.
EN 13870 : 2015 ; Food processing machinery. Portion cutting machines. Safety and hygiene requirements.
EN 13871 : 2005+A1 : 2010 ; Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements.
EN 13871 : 2014 ; Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements.
EN 13877-2 : 2004 ; Concrete pavements. Functional requirements for concrete pavements
EN 13877-2 : 2013 ; Concrete pavements. Functional requirements for concrete pavements
EN 13877-3 : 2004 ; Concrete pavements. Specifications for dowels to be used in concrete pavements
EN 13885 : 2005+A1 : 2010 ; Food processing machinery. Clipping machines. Safety and hygiene requirements.
EN 13886 : 2005+A1 : 2010 ; Food processing machinery. Cooking kettles equipped with powered stirrer and/or mixer. Safety and hygiene requirements.
EN 13888 : 2009 ; Grout for tiles. Requirements, evaluation of conformity, classification and designation.
EN 13890 : 2009 ; Workplace exposure. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods.
EN 13892-3 : 2014 ; Methods of test for screed materials. Determination of wear resistance. Böhme
EN 13897 : 2004 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness after stretching at low temperatures.
EN 13900-5 : 2005 ; Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by filter pressure value test
EN 13900-6 : 2012 ; Pigments and extenders. Methods of dispersion and assessment of dispersability in plastics. Determination by film test
EN 13906-1 : 2013 ; Cylindrical helical springs made from round wire and bar. Calculation and design. Compression springs
EN 13906-2 : 2013 ; Cylindrical helical springs made from round wire and bar. Calculation and design. Extension springs
EN 13906-3 : 2014 ; Cylindrical helical springs made from round wire and bar. Calculation and design. Torsion springs
EN 13914-1 : 2005 ; Design, preparation and application of external rendering and internal plastering. External rendering
EN 13914-1 : 2016 ; Design, preparation and application of external rendering and internal plastering. External rendering
EN 13914-2 : 2005 ; Design, preparation and application of external rendering and internal plastering. Design considerations and essential principles for internal plastering
EN 13914-2 : 2016 ; Design, preparation and application of external rendering and internal plastering. Internal plastering
EN 13915 : 2007 ; Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods.
EN 13921 : 2007 ; Personal protective equipment. Ergonomic principles.
EN 13922 : 2011 ; Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels.
EN 13923 : 2005 ; Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing.
EN 13924-1 : 2015 ; Bitumen and bituminous binders. Specification framework for special paving grade bitumen. Hard paving grade bitumens
EN 13924-2 : 2014 ; Bitumen and bituminous binders. Specification framework for special paving grade bitumen. Multigrade paving grade bitumens
EN 13924 : 2006 ; Bitumen and bituminous binders. Specifications for hard paving grade bitumens.
EN 13925-3 : 2005 ; Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. Instruments
EN 13936 : 2014 ; Workplace exposure. Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour. Requirements and test methods.
EN 13940-1 : 2007 ; Health informatics. System of concepts to support continuity of care. Basic concepts
EN 13941 : 2009+A1 : 2010 ; Design and installation of preinsulated bonded pipe systems for district heating.
EN 13942 : 2009 ; Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves.
EN 13946 : 2014 ; Water quality. Guidance for the routine sampling and preparation of benthic diatoms from rivers and lakes.
EN 13947 : 2006 ; Thermal performance of curtain walling. Calculation of thermal transmittance.
EN 13948 : 2007 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to root penetration.
EN 13950 : 2005 ; Gypsum plasterboard thermal/acoustic insulation composite panels. Definitions, requirements and test methods.
EN 13950 : 2014 ; Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods.
EN 13951 : 2012 ; Liquid pumps. Safety requirements. Agrifoodstuffs equipment ; Design rules to ensure hygiene in use.
EN 13953 : 2015 ; LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG).
EN 13954 : 2005+A1 : 2010 ; Food processing machinery. Bread slicers. Safety and hygiene requirements.
EN 13956 : 2005 ; Flexible sheet for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics.
EN 13956 : 2012 ; Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics.
EN 13957 : 2008 ; Aluminium and aluminium alloys. Extruded round, coiled tube for general applications. Specification.
EN 13958 : 2008 ; Aluminium and aluminium alloys. Cold drawn, round, coiled tube for general applications. Specification.
EN 13959 : 2004 ; Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D.
EN 13963 : 2005 ; Jointing materials for gypsum plasterboards. Definitions, requirements and test methods.
EN 13963 : 2014 ; Jointing materials for gypsum boards. Definitions, requirements and test methods.
EN 13964 : 2014 ; Suspended ceilings. Requirements and test methods.
EN 13965-2 : 2010 ; Characterization of waste. Terminology. Management related terms and definitions
EN 13967 : 2004+A1 : 2006 ; Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics.
EN 13967 : 2012 ; Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics .
EN 13969 : 2004 ; Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets. Definitions and characteristics.
EN 13970 : 2004 ; Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and characteristics.
EN 13971 : 2008 ; Carbonate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid.
EN 13971 : 2012 ; Carbonate and silicate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid.
EN 13976-1 : 2011 ; Rescue systems. Transportation of incubators. Interface conditions
EN 13976-2 : 2011 ; Rescue systems. Transportation of incubators. System requirements
EN 13977 : 2005 ; Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance.
EN 13977 : 2011 ; Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance.
EN 13978-1 : 2005 ; Precast concrete products. Precast concrete garages. Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
EN 13981-3 : 2006 ; Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Castings
EN 13981-4 : 2006 ; Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Forgings
EN 13984 : 2004+A1 : 2006 ; Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics.
EN 13984 : 2013 ; Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics.
EN 13986 : 2004+A1 : 2015 ; Wood-based panels for use in construction. Characteristics, evaluation of conformity and marking.
EN 13999-1 : 2006 ; Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure
EN 13999-1 : 2013 ; Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure
EN 13999-2 : 2007 ; Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
EN 13999-2 : 2013 ; Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
EN 13999-3 : 2007+A1 : 2009 ; Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile aldehydes
EN 13999-4 : 2007+A1 : 2009 ; Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile diisocyanates
EN 14012 : 2008 ; Postal services. Quality of service. Complaints handling principles.
EN 14015 : 2004 ; Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above.
EN 14017 : 2005+A2 : 2009 ; Agricultural and forestry machinery. Solid fertilizer distributors. Safety.
EN 14018 : 2005+A1 : 2009 ; Agricultural and forestry machinery. Seed drills. Safety.
EN 14019 : 2016 ; Curtain Walling. Impact resistance. Performance requirements.
EN 14022 : 2010 ; Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives.
EN 14023 : 2005 ; Bitumen and bituminous binders. Framework specification for polymer modified bitumens.
EN 14023 : 2010 ; Bitumen and bituminous binders. Specification framework for polymer modified bitumens.
EN 14025 : 2008 ; Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and Construction.
EN 14025 : 2013+A1 : 2016 ; Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction.
EN 14033-1 : 2008 ; Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for running
EN 14033-1 : 2011 ; Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for running
EN 14033-2 : 2008+A1 : 2011 ; Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for working
EN 14033-3 : 2009+A1 : 2011 ; Railway applications. Track. Railbound construction and maintenance machines. General safety requirements
EN 14034-1 : 2004+A1 : 2011 ; Determination of explosion characteristics of dust clouds. Determination of the maximum explosion pressure p$dm$da$dx of dust clouds
EN 14034-2 : 2006+A1 : 2011 ; Determination of explosion characteristics of dust clouds. Determination of the maximum rate of explosion pressure rise (dp/dt)$dmax of dust clouds
EN 14034-3 : 2006+A1 : 2011 ; Determination of explosion characteristics of dust clouds. Determination of the lower explosion limit LEL of dust clouds
EN 14034-4 : 2004+A1 : 2011 ; Determination of explosion characteristics of dust clouds. Determination of the limiting oxygen concentration LOC of dust clouds
EN 14035-5 : 2006 ; Fireworks. Batteries and combinations. Specification and test methods
EN 14035-25 : 2005 ; Fireworks. Party poppers. Specification and test methods
EN 14035-38 : 2006 ; Fireworks. Shot tubes. Specification and test methods
EN 14037-1 : 2016 ; Free hanging heating and cooling surfaces for water with a temperature below 120^DC. Pre-fabricated ceiling mounted radiant panels for space heating. Technical specifications and requirements
EN 14037-2 : 2016 ; Free hanging heating and cooling surfaces for water with a temperature below 120^DC. Pre-fabricated ceiling mounted radiant panels for space heating. Test method for thermal output
EN 14037-3 : 2016 ; Free hanging heating and cooling surfaces for water with a temperature below 120^DC. Prefabricated ceiling mounted radiant panels for space heating. Rating method and evaluation of radiant thermal output
EN 14037-4 : 2016 ; Free hanging heating and cooling surfaces for water with a temperature below 120^DC. Pre-fabricated ceiling mounted radiant panels. Test method for cooling capacity
EN 14037-5 : 2016 ; Free hanging heating and cooling surfaces for water with a temperature below 120^DC. Open or closed heated ceiling surfaces. Test method for thermal output
EN 14038-1 : 2016 ; Electrochemical realkalization and chloride extraction treatments for reinforced concrete. Realkalization
EN 14043 : 2005+A1 : 2009 ; High rise aerial appliances for fire service use. Turntable ladders with combined movements. Safety and performance requirements and test methods.
EN 14043 : 2014 ; High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods.
EN 14044 : 2005+A1 : 2009 ; High rise aerial appliances for fire service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods.
EN 14044 : 2014 ; High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods.
EN 14052 : 2012+A1 : 2012 ; High performance industrial helmets.
EN 14063-2 : 2013 ; Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products. Specification for the installed products
EN 14064-1 : 2010 ; Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products. Specification for the loose-fill products before installation
EN 14064-2 : 2010 ; Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products. Specification for the installed products
EN 14065 : 2016 ; Textiles. Laundry processed textiles. Biocontamination control system.
EN 14066 : 2013 ; Natural stone test methods. Determination of resistance to ageing by thermal shock.
EN 14067-4 : 2005+A1 : 2009 ; Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics on open track
EN 14067-4 : 2013 ; Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics on open track
EN 14067-5 : 2006+A1 : 2010 ; Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics in tunnels
EN 14070 : 2003+A1 : 2009 ; Safety of machine tools. Transfer and special-purpose machines.
EN 14071 : 2015 ; LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment.
EN 14078 : 2009 ; Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method.
EN 14078 : 2014 ; Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method.
EN 14080 : 2005 ; Timber structures. Glued laminated timber. Requirements.
EN 14080 : 2013 ; Timber structures. Glued laminated timber and glued solid timber. Requirements.
EN 14081-1 : 2005+A1 : 2011 ; Timber structures. Strength graded structural timber with rectangular cross section. General requirements
EN 14081-1 : 2016 ; Timber structures. Strength graded structural timber with rectangular cross section. General requirements
EN 14081-2 : 2005 ; Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for initial type testing
EN 14081-2 : 2010+A1 : 2012 ; Timber structures. Strength graded structural timber with rectangular cross section. Machine grading ; additional requirements for initial type testing
EN 14081-3 : 2005 ; Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for factory production control
EN 14081-3 : 2012 ; Timber structures. Strength graded structural timber with rectangular cross section . Machine grading ; additional requirements for factory production control
EN 14081-4 : 2005 ; Timber structures. Strength graded structural timber with rectangular cross section . Machine grading. Grading machine settings for machine controlled systems
EN 14081-4 : 2009 ; Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Grading machine settings for machine controlled systems
EN 14085 : 2010 ; Resilient floor coverings. Specification for floor panels for loose laying.
EN 14103 : 2011 ; Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linolenic acid methyl ester contents.
EN 14105 : 2011 ; Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents.
EN 14112 : 2016 ; Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of oxidation stability (accelerated oxidation test).
EN 14116 : 2007+A2 : 2010 ; Tanks for transport of dangerous goods. Digital interface for the product recognition device.
EN 14116 : 2012+A1 : 2014 ; Tanks for transport of dangerous goods. Digital interface for product recognition devices for liquid fuels.
EN 14121 : 2009 ; Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications.
EN 14122 : 2014 ; Foodstuffs. Determination of vitamin B1 by high performance liquid chromatography.
EN 14123 : 2007 ; Foodstuffs. Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder. High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup.
EN 14124 : 2004 ; Inlet valves for flushing cisterns with internal overflow.
EN 14125 : 2004 ; Thermoplastic and flexible metal pipework for underground installation at petrol filling stations.
EN 14125 : 2013 ; Thermoplastic and flexible metal pipework for underground installation at petrol filling stations.
EN 14127 : 2011 ; Non-destructive testing. Ultrasonic thickness measurement.
EN 14129 : 2014 ; LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels.
EN 14132 : 2009 ; Foodstuffs. Determination of ochratoxin A in barley and roasted coffee. HPLC method with immunoaffinity column clean-up.
EN 14133 : 2009 ; Foodstuffs. Determination of ochratoxin A in wine and beer. HPLC method with immunoaffinity column clean-up.
EN 14139 : 2010 ; Ophthalmic optics. Specifications for ready-to-wear spectacles.
EN 14140 : 2014 ; LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction.
EN 14141 : 2013 ; Valves for natural gas transportation in pipelines. Performance requirements and tests.
EN 14142-1 : 2011 ; Postal services. Address databases. Components of postal addresses
EN 14143 : 2013 ; Respiratory equipment. Self-contained re-breathing diving apparatus.
EN 14150 : 2006 ; Geosynthetic barriers. Determination of permeability to liquids.
EN 14151 : 2010 ; Geosynthetics. Determination of burst strength.
EN 14152 : 2014 ; Foodstuffs. Determination of vitamin B2 by high performance liquid chromatography.
EN 14154-1 : 2005+A2 : 2011 ; Water meters. General requirements
EN 14154-2 : 2005+A2 : 2011 ; Water meters. Installation and conditions of use
EN 14154-3 : 2005+A2 : 2011 ; Water meters. Test methods and equipment
EN 14157 : 2004 ; Natural stones. Determination of abrasion resistance.
EN 14159 : 2014 ; Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat.
EN 14161 : 2011+A1 : 2015 ; Petroleum and natural gas industries. Pipeline transportation systems.
EN 14164 : 2008 ; Foodstuffs. Determination of vitamin B6 by HPLC.
EN 14164 : 2014 ; Foodstuffs. Determination of vitamin B6 by high performance chromatography.
EN 14166 : 2009 ; Foodstuffs. Determination of vitamin B6 by microbiological assay.
EN 14175-6 : 2006 ; Fume cupboards. Variable air volume fume cupboards
EN 14175-7 : 2012 ; Fume cupboards. Fume cupboards for high heat and acidic load
EN 14179-1 : 2005 ; Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass. Definition and description
EN 14179-1 : 2016 ; Glass in building. Heat soaked thermally toughened soda lime silicate safety glass. Definition and description
EN 14179-2 : 2005 ; Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass. Evaluation of conformity/product standard
EN 14180 : 2014 ; Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing.
EN 14181 : 2014 ; Stationary source emissions. Quality assurance of automated measuring systems.
EN 14184 : 2014 ; Water quality. Guidance for the surveying of aquatic macrophytes in running waters.
EN 14185-2 : 2006 ; Non fatty foods. Determination of N-methylcarbamate residues. HPLC method with clean-up on a diatomaceous earth column
EN 14186 : 2007 ; Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of elastic properties by an ultrasonic technique.
EN 14187-9 : 2006 ; Cold applied joint sealants. Test methods. Function testing of joint sealants
EN 14188-2 : 2004 ; Joint fillers and sealants. Specifications for cold applied sealants
EN 14188-3 : 2006 ; Joint fillers and sealants. Specification for preformed joint seals
EN 14188-4 : 2009 ; Joint fillers and sealants. Specifications for primers to be used with joint sealants
EN 14190 : 2005 ; Gypsum plasterboard products from reprocessing. Definitions, requirements and test methods.
EN 14190 : 2014 ; Gypsum board products from reprocessing. Definitions, requirements and test methods.
EN 14195 : 2005 ; Metal framing components for gypsum plasterboard systems. Definitions, requirements and test methods.
EN 14195 : 2014 ; Metal framing components for gypsum board systems. Definitions, requirements and test methods.
EN 14196 : 2016 ; Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers.
EN 14198 : 2004 ; Railway applications. Braking. Requirements for the brake systems of trains hauled by a locomotive.
EN 14198 : 2016 ; Railway applications. Braking. Requirements for the brake system of trains hauled by locomotives.
EN 14199 : 2005 ; Execution of special geotechnical works. Micropiles.
EN 14199 : 2015 ; Execution of special geotechnical works. Micropiles.
EN 14204 : 2012 ; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1).
EN 14209 : 2005 ; Preformed plasterboard cornices. Definitions, requirements and testmetho ds.
EN 14211 : 2005 ; Ambient air quality. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence.
EN 14211 : 2012 ; Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence.
EN 14212 : 2005 ; Ambient air quality. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence.
EN 14212 : 2012 ; Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence.
EN 14214 : 2008+A1 : 2009 ; Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods.
EN 14214 : 2012+A1 : 2014 ; Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods.
EN 14215 : 2013 ; Textile floor coverings. Classification of machine-made pile rugs and runners.
EN 14220 : 2006 ; Timber and wood-based materials in external windows, external door leaves and external doorframes. Requirements and specifications.
EN 14221 : 2006 ; Timber and wood-based materials in internal windows, internal door leaves and internal doorframes. Requirements and specifications.
EN 14223 : 2005 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of water absorption.
EN 14224 : 2005 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of crack bridging ability.
EN 14224 : 2010 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of crack bridging ability.
EN 14225-1 : 2005 ; Diving suits. Wet suits. Requirements and test methods
EN 14225-2 : 2005 ; Diving suits. Dry suits. Requirements and test methods
EN 14225-3 : 2005 ; Diving suits. Actively heated or cooled suits (systems). Requirements and test methods
EN 14225-4 : 2005 ; Diving suits. One atmosphere suits (ADS). Human factors requirements and test methods
EN 14227-1 : 2013 ; Hydraulically bound mixtures. Specifications. Cement bound granular mixtures
EN 14227-2 : 2013 ; Hydraulically bound mixtures. Specifications. Slag bound granular mixtures
EN 14227-3 : 2013 ; Hydraulically bound mixtures. Specifications. Fly ash bound granular mixtures
EN 14227-4 : 2013 ; Hydraulically bound mixtures. Specifications. Fly ash for hydraulically bound mixtures
EN 14227-5 : 2013 ; Hydraulically bound mixtures. Specifications. Hydraulic road binder bound granular mixtures
EN 14227-10 : 2006 ; Hydraulically bound mixtures. Specifications. Soil treated by cement
EN 14227-11 : 2006 ; Unbound and hydraulically bound mixtures. Specifications. Soil treated by lime
EN 14227-12 : 2006 ; Hydraulically bound mixtures. Specifications. . Soil treated by slag
EN 14227-13 : 2006 ; Hydraulically bound mixtures. Specifications. Soil treated by hydraulic road binder
EN 14227-14 : 2006 ; Hydraulically bound mixtures. Specifications. Soil treated by fly ash
EN 14227-15 : 2015 ; Hydraulically bound mixtures. Specifications. Hydraulically stabilized soils
EN 14229 : 2010 ; Structural timber. Wood poles for overhead lines.
EN 14232 : 2009 ; Advanced technical ceramics. Terms, definitions and abbreviations.
EN 14238 : 2004+A1 : 2009 ; Cranes. Manually controlled load manipulating devices.
EN 14241-1 : 2005 ; Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods. Seals in flue liners
EN 14241-1 : 2013 ; Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods. Seals in flue liners
EN 14246 : 2006 ; Gypsum elements for suspended ceilings. Definitions, requirements and test methods.
EN 14250 : 2004 ; Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners.
EN 14250 : 2010 ; Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners.
EN 14255-1 : 2005 ; Measurement and assessment of personal exposures to incoherent optical radiation. Ultraviolet radiation emitted by artifical sources in the workplace
EN 14255-2 : 2005 ; Measurement and assessment of personal exposures to incoherent optical radiation. Visible and infrared radiation emitted by artificial sources in the workplace
EN 14255-3 : 2008 ; Measurement and assessment of personal exposures to incoherent optical radiation. UV-Radiation emitted by the sun
EN 14255-4 : 2006 ; Measurement and assessment of personal exposures to incoherent optical radiation. Terminology and quantities used in UV-, visible and IR-exposure measurements
EN 14256 : 2007 ; Adhesives for non-structural wood applications. Test method and requirements for resistance to static load.
EN 14257 : 2006 ; Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT ’91).
EN 14268 : 2005 ; Irrigation techniques. Meters for irrigation water.
EN 14272 : 2011 ; Plywood. Calculation method for some mechanical properties.
EN 14274 : 2013 ; Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS).
EN 14275 : 2013 ; Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers.
EN 14276-1 : 2006+A1 : 2011 ; Pressure equipment for refrigerating systems and heat pumps. Vessels. General requirements
EN 14276-2 : 2007+A1 : 2011 ; Pressure equipment for refrigerating systems and heat pumps. Piping. General requirements
EN 14277 : 2006 ; Ventilation for buildings. Air terminal devices. Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes.
EN 14278-1 : 2004 ; Textiles. Determination of cotton fibre stickiness. Method using a manual theromodetection device
EN 14279 : 2004+A1 : 2009 ; Laminated veneer lumber (LVL). Definitions, classification and specifications.
EN 14286 : 2007 ; Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods.
EN 14286 : 2008 ; Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods.
EN 14292 : 2005 ; Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature.
EN 14293 : 2006 ; Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements .
EN 14294 : 2010 ; Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes.
EN 14296 : 2005 ; Sanitary appliances. Communal washing troughs.
EN 14298 : 2004 ; Sawn timber. Assessment of drying quality.
EN 14303 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrialinstallations. Factory made mineral wool (MW) products. Specification.
EN 14303 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made mineral wool (MW) products. Specification.
EN 14304 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial installations. Factory made flexible elastomeric foam (FEF) products. Specification.
EN 14304 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made flexible elastomeric foam (FEF) products. Specification.
EN 14305 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial installations. Factory made cellular glass (CG) products. Specification.
EN 14305 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made cellular glass (CG) products. Specification.
EN 14306 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial installations. Factory made calcium silicate (CS) products. Specification.
EN 14306 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made calcium silicate (CS) products. Specification.
EN 14307 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrialinstallations. Factory made extruded polystyrene foam (XPS) products.Specification.
EN 14307 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made extruded polystyrene foam (XPS) products. Specification.
EN 14308 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial installations. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products. Specification.
EN 14308 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products. Specification.
EN 14309 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification.
EN 14309 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification.
EN 14313 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial installations. Factory made polyethylene foam (PEF) products. Specification.
EN 14313 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made polyethylene foam (PEF) products. Specification.
EN 14314 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification.
EN 14314 : 2015 ; Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification.
EN 14315-1 : 2013 ; Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Specification for the rigid foam spray system before installation
EN 14315-2 : 2013 ; Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Specification for the installed insulation products
EN 14316-2 : 2007 ; Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products. Specification for the installed products
EN 14317-2 : 2007 ; Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Specification for the installed products
EN 14318-1 : 2013 ; Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Specification for the rigid foam dispensed system before installation
EN 14318-2 : 2013 ; Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Specification for the installed insulation products
EN 14319-1 : 2013 ; Thermal insulating products for building equipment and industrial installations. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Specification for the rigid foam dispensed system before installation
EN 14319-2 : 2013 ; Thermal insulating products for building equipment and industrial installations. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Specification for the installed insulation products
EN 14320-1 : 2013 ; Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Specification for the rigid foam spray system before installation
EN 14320-2 : 2013 ; Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Specification for the installed insulation products
EN 14321-1 : 2005 ; Glass in building. Thermally toughened alkaline earth silicate safety glass. Definition and description
EN 14321-2 : 2005 ; Glass in building. Thermally toughened alkaline earth silicate safety glass. Evaluation of conformity/Product standard
EN 14328 : 2005 ; Protective clothing. Gloves and armguards protecting against cuts by powered knives. Requirements and test methods.
EN 14334 : 2005 ; Inspection and testing of LPG road tankers.
EN 14334 : 2014 ; LPG equipment and accessories. Inspection and testing of LPG road tankers.
EN 14336 : 2004 ; Heating systems in buildings. Installation and commissioning of water based heating systems.
EN 14337 : 2005 ; Heating systems in buildings. Design and installation of direct electrical room heating systems.
EN 14342 : 2005+A1 : 2008 ; Wood flooring. Characteristics, evaluation of conformity and marking.
EN 14342 : 2013 ; Wood flooring and parquet. Characteristics, evaluation of conformity and marking.
EN 14343 : 2005 ; Rotary positive displacement pumps. Performance tests for acceptance.
EN 14346 : 2006 ; Characterization of waste. Calculation of dry matter by determination of dry residue or water content.
EN 14347 : 2005 ; Chemical disinfectants and antiseptics. Basic sporicidal activity. Test method and requirements (phase 1, step 1).
EN 14348 : 2005 ; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants. Test methods and requirements (phase 2, step 1).
EN 14349 : 2007 ; Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on non-porous surfaces without mechanical action. Test method and requirements (phase 2, step 2).
EN 14349 : 2012 ; Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action. Test method and requirements (phase 2, step 2).
EN 14351-1 : 2006+A2 : 2016 ; Windows and doors. Product standard, performance characteristics. Windows and external pedestrian doorsets
EN 14353 : 2007+A1 : 2010 ; Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods.
EN 14354 : 2004 ; Wood-based panels. Wood veneer floor covering.
EN 14358 : 2006 ; Timber structures. Calculation of characteristic 5-percentile values and acceptance criteria for a sample.
EN 14358 : 2016 ; Timber structures. Calculation and verification of characteristic values.
EN 14359 : 2006+A1 : 2010 ; Gas-loaded accumulators for fluid power applications.
EN 14362-1 : 2012 ; Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres
EN 14362-3 : 2012 ; Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
EN 14363 : 2005 ; Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Testing of running behavior and stationary tests.
EN 14363 : 2016 ; Railway applications. Testing and Simulation for the acceptance of running characteristics of railway vehicles. Running Behaviour and stationary tests.
EN 14364 : 2006+A1 : 2008 ; Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints.
EN 14364 : 2013 ; Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints.
EN 14367 : 2005 ; Non controllable backflow preventer with different pressure zones. Family C, type A.
EN 14368 : 2015 ; Products used for treatment of water intended for human consumption. Manganese dioxide coated limestone.
EN 14369 : 2015 ; Products used for treatment of water intended for human consumption. Iron-coated granular activated alumina.
EN 14375 : 2003 ; Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing.
EN 14375 : 2016 ; Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing.
EN 14382 : 2005+A1 : 2009 ; Safety devices for gas pressure regulating stations and installations. Gas safety shut-off devices for inlet pressures up to 100 bar.
EN 14383-1 : 2006 ; Prevention of crime. Urban planning and building design. Definition of specific terms
EN 14388 : 2005 ; Road traffic noise reducing devices. Specifications.
EN 14388 : 2015 ; Road traffic noise reducing devices. Specifications.
EN 14389-1 : 2007 ; Road traffic noise reducing devices. Procedures for assessing long term performance. Acoustical characteristics
EN 14389-1 : 2015 ; Road traffic noise reducing devices. Procedures for assessing long term performance. Acoustical characteristics
EN 14389-2 : 2015 ; Road traffic noise reducing devices. Procedures for assessing long term performance. Non-acoustical characteristics
EN 14390 : 2007 ; Fire test. Large-scale room reference test for surface products.
EN 14391 : 2004 ; Packaging. Collapsible aluminium tubes. Tactile warnings of danger.
EN 14392 : 2007 ; Aluminium and aluminium alloys. Requirements for anodised products for use in contact with foodstuff.
EN 14394 : 2005+A1 : 2008 ; Heating boilers. Heating boilers with forced draught Burners. Nominal heat output not exceeding 10 MW and maximum operating temperature of 110°C.
EN 14397-1 : 2010 ; Fertilizers and liming materials. Determination of carbon dioxide. Method for solid fertilizers
EN 14399-1 : 2005 ; High-strength structural bolting assemblies for preloading. General requirements
EN 14399-1 : 2015 ; High-strength structural bolting assemblies for preloading. General requirements
EN 14399-2 : 2005 ; High-strength structural bolting assemblies for preloading. Suitability test for preloading
EN 14399-2 : 2015 ; High-strength structural bolting assemblies for preloading. Suitability for preloading
EN 14399-3 : 2005 ; High-strength structural bolting for preloading. System HR. Hexagon bolt and nut assemblies
EN 14399-3 : 2015 ; High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies
EN 14399-4 : 2005 ; High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies
EN 14399-4 : 2015 ; High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies
EN 14399-5 : 2005 ; High-strength structural bolting assemblies for preloading. Plain washers
EN 14399-5 : 2015 ; High-strength structural bolting assemblies for preloading. Plain washers
EN 14399-6 : 2005 ; High-strength structural bolting assemblies for preloading. Plain chamfered washers
EN 14399-6 : 2015 ; High-strength structural bolting assemblies for preloading. Plain chamfered washers
EN 14399-7 : 2007 ; High-strength structural bolting assemblies for preloading. System HR. Countersunk head bolt and nut assemblies
EN 14399-8 : 2007 ; High-strength structural bolting assemblies for preloading. System HV. Hexagon fit bolt and nut assemblies
EN 14399-9 : 2009 ; High strength structural bolting for preloading. System HR or HV. Direct tension indicators for bolt and nut assemblies
EN 14399-10 : 2009 ; High-strength structural bolting assemblies for preloading. System HRC. Bolt and nut assemblies with calibrated preload
EN 14401 : 2004 ; Rigid plastics containers. Methods to test the effectiveness of closures.
EN 14407 : 2014 ; Water quality. Guidance for the identification and enumeration of benthic diatom samples from rivers and lakes.
EN 14408-1 : 2004 ; Plastics piping systems for renovation of underground gas supply networks. General
EN 14408-3 : 2004 ; Plastics piping systems for renovation of underground gas supply networks. Lining with close-fit pipes
EN 14409-1 : 2004 ; Plastics piping systems for renovation of underground water supply networks. General
EN 14409-3 : 2004 ; Plastics piping systems for renovation of underground water supply networks. Lining with close fit pipes
EN 14411 : 2006 ; Ceramic tiles. Definitions, classification, characteristics and marking.
EN 14411 : 2012 ; Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking.
EN 14411 : 2016 ; Ceramic tiles. Definition, classification, characteristics, assessment and verification of constancy of performance and marking.
EN 14419 : 2009 ; District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems.
EN 14420-1 : 2004 ; Hose fittings with clamp units. Requirements, survey, designation and testing
EN 14420-1 : 2013 ; Hose fittings with clamp units. Requirements, types of fixing and connection, designation and testing
EN 14420-2 : 2004 ; Hose fittings with clamp units. Hose side parts of hose tail
EN 14420-2 : 2013 ; Hose fittings with clamp units. Hose side parts of hose tail
EN 14420-3 : 2004 ; Hose fittings with clamp units. Clamp units, bolted or pinned
EN 14420-3 : 2013 ; Hose fittings with clamp units. Clamp units, bolted or pinned
EN 14420-4 : 2004 ; Hose fittings with clamp units. Flange connections
EN 14420-4 : 2013 ; Hose fittings with clamp units. Flange connections
EN 14420-5 : 2004 ; Hose fittings with clamp units. Threaded connections
EN 14420-5 : 2013 ; Hose fittings with clamp units. Threaded connections
EN 14420-6 : 2004 ; Hose fittings with clamp units. TW tank truck couplings
EN 14420-6 : 2013 ; Hose fittings with clamp units. TW tank truck couplings
EN 14420-7 : 2004 ; Hose fittings with clamp units. Cam locking couplings
EN 14420-7 : 2013 ; Hose fittings with clamp units. Cam locking couplings
EN 14420-8 : 2004+A1 : 2007 ; Hose fittings with clamp units. Symmetrical half coupling (Guillemin system)
EN 14420-8 : 2013+A1 : 2016 ; Hose fittings with clamp units. Symmetrical half coupling (Guillemin system)
EN 14422 : 2004 ; Clamp type coupling assemblies for LPG transfer hoses.
EN 14422 : 2013 ; Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses.
EN 14423 : 2004 ; Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar.
EN 14423 : 2013 ; Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar.
EN 14425-3 : 2010 ; Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Chevron notched beam (CNB) method
EN 14427 : 2014 ; LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction.
EN 14428 : 2004+A1 : 2008 ; Shower enclosures. Functional requirements and test methods.
EN 14428 : 2015 ; Shower enclosures. Functional requirements and test methods.
EN 14429 : 2015 ; Characterization of waste. Leaching behaviour test. Influence of pH on leaching with initial acid/base addition.
EN 14431 : 2004 ; Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture.
EN 14432 : 2006 ; Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Product discharge and air inlet valves.
EN 14432 : 2014 ; Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Product discharge and air inlet valves.
EN 14433 : 2006 ; Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Foot valves.
EN 14433 : 2014 ; Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Foot valves.
EN 14434 : 2004 ; Writing boards for educational institutions. Ergonomic, technical and safety requirements and their test methods.
EN 14438 : 2006 ; Gas-fired insets for heating more than one room.
EN 14444 : 2005 ; Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test.
EN 14447 : 2005 ; Fibre reinforced plastics. Glass mat reinforced thermoplastics (GMT). Determination of flowability and solidification.
EN 14449 : 2005 ; Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard.
EN 14450 : 2005 ; Secure storage units. Requirements, classification and methods of test for resistance to burglary. Secure safe cabinets.
EN 14451 : 2005 ; Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80 ; Family D, type A.
EN 14452 : 2005 ; Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 ; Family D, t ype B.
EN 14453 : 2005 ; Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 ; Family D, type C.
EN 14454 : 2005 ; Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A.
EN 14455 : 2005 ; Devices to prevent pollution by backflow of potable water. Pressurised air inlet valves DN 15 to DN 50 ; Family L, type A and type B.
EN 14459 : 2007 ; Control functions in electronic systems for gas burners and gas burning appliances. Methods for classification and assessment.
EN 14459 : 2015 ; Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Methods for classification and assessment.
EN 14462 : 2005+A1 : 2009 ; Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3 ;
EN 14462 : 2015 ; Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3 ;
EN 14463 : 2007 ; Health informatics. A syntax to represent the content of medical classification systems. ClaML.
EN 14466 : 2005+A1 : 2008 ; Fire-fighting pumps. Portable pumps. Safety and performance requirements, tests.
EN 14468-1 : 2004 ; Table tennis. Table tennis tables, functional and safety requirements, test methods
EN 14468-1 : 2015 ; Table tennis. Table tennis tables, functional and safety requirements, test methods
EN 14468-2 : 2005 ; Table tennis. Posts for net assemblies. Requirements and test methods
EN 14468-2 : 2015 ; Table tennis. Posts for net assemblies. Requirements and test methods
EN 14470-2 : 2006 ; Fire safety storage cabinets. Safety cabinets for pressurised gas cylinders
EN 14471 : 2005 ; Chimneys. System chimneys with plastic flue liners. Requirements and test methods.
EN 14471 : 2013+A1 : 2015 ; Chimneys. System chimneys with plastic flue liners. Requirements and test methods.
EN 14474 : 2004 ; Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods.
EN 14475 : 2006 ; Execution of special geotechnical works. Reinforced fill .
EN 14476 : 2005 ; Chemical disinfectants and antiseptics. Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine. Test method and requirements (phase 2, step 1).
EN 14476 : 2013+A1 : 2015 ; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements (Phase 2/Step 1).
EN 14477 : 2004 ; Packaging. Flexible packaging material. Determination of puncture resistance. Test methods.
EN 14478 : 2005 ; Railway applications. Braking. Generic vocabulary.
EN 14479 : 2004 ; Packaging. Flexible packaging material. Determination of residual solvents by dynamic headspace gas chromatography. Absolute method.
EN 14482 : 2010 ; Postal services. Trays for international letter mail. Test methods and performance requirements.
EN 14486 : 2005 ; Water quality. Detection of human enteroviruses by monolayer plaque assay.
EN 14487-1 : 2005 ; Sprayed concrete. Definitions, specifications and conformity
EN 14488-1 : 2005 ; Testing sprayed concrete. Sampling fresh and hardened concrete
EN 14488-2 : 2006 ; Testing sprayed concrete. Compressive strength of young sprayed concrete
EN 14488-3 : 2006 ; Testing sprayed concrete. Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 14488-4 : 2005+A1 : 2008 ; Testing sprayed concrete. Bond strength of cores by direct tension
EN 14488-5 : 2006 ; Testing sprayed concrete. Determination of energy absorption capacity of fibre reinforced slab specimens
EN 14488-6 : 2006 ; Testing sprayed concrete. Thickness of concrete on a substrate
EN 14488-7 : 2006 ; Testing sprayed concrete. Fibre content of fibre reinforced concrete
EN 14490 : 2010 ; Execution of special geotechnical works. Soil nailing.
EN 14491 : 2006 ; Dust explosion venting protective systems.
EN 14491 : 2012 ; Dust explosion venting protective systems.
EN 14492-1 : 2006+A1 : 2009 ; Cranes. Power driven winches and hoists. Power driven winches
EN 14492-2 : 2006+A1 : 2009 ; Cranes. Power driven winches and hoists. Power driven hoists
EN 14496 : 2005 ; Gypsum based adhesives for thermal/acoustic insulation composite panelsa nd plasterboards. Definitions, requirements and test methods.
EN 14497 : 2004 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of the filtration stability.
EN 14498 : 2004 ; Products and systems for the protection and repair of concrete structures. Test methods. Volume and weight changes of injection products after air drying and water storage cycles.
EN 14499 : 2015 ; Textile floor coverings. Minimum requirements for carpet underlays.
EN 14500 : 2008 ; Blinds and shutters. Thermal and visual comfort. Test and calculation methods.
EN 14501 : 2005 ; Blinds and shutters. Thermal and visual comfort. Performance characteristics and classification.
EN 14502-1 : 2005 ; Cranes. Equipment for lifting persons. Suspended baskets
EN 14502-1 : 2010 ; Cranes. Equipment for the lifting of persons. Suspended baskets
EN 14502-2 : 2005+A1 : 2008 ; Cranes. Equipment for the lifting of persons. Elevating control stations
EN 14504 : 2009 ; Inland navigation vessels. Floating landing stages. Requirements, tests.
EN 14504 : 2016 ; Inland navigation vessels. Floating landing stages and floating equipment on inland waters. Requirements, tests.
EN 14505 : 2005 ; Cathodic protection of complex structures.
EN 14506 : 2005 ; Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C.
EN 14508 : 2016 ; Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail.
EN 14509 : 2006 ; Self-supporting double skin metal faced insulating panels. Factory made products. Specifications.
EN 14509 : 2013 ; Self-supporting double skin metal faced insulating panels. Factory made products. Specifications.
EN 14510 : 2005 ; Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack).
EN 14511-1 : 2007 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Terms and definitions
EN 14511-1 : 2011 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Terms and definitions
EN 14511-1 : 2013 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Terms, definitions and classification
EN 14511-2 : 2007 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions
EN 14511-2 : 2011 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions
EN 14511-2 : 2013 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions
EN 14511-3 : 2007 ; Air conditioners, liquid chilling packages and heat pumps with electrical driven compressors for space heating and cooling. Test methods
EN 14511-3 : 2011 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test methods
EN 14511-3 : 2013 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test methods
EN 14511-4 : 2007 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Requirements
EN 14511-4 : 2011 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Requirements
EN 14511-4 : 2013 ; Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Operating requirements, marking and instructions
EN 14512 : 2006 ; Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Hinged manhole cover and neckrings with pivoting bolts.
EN 14513 : 2005 ; Transportable gas cylinders. Bursting disc pressure relief devices (excluding acetylene gas cylinders).
EN 14514 : 2004 ; Space engineering standards. Functional analysis.
EN 14518 : 2005 ; Ventilation for buildings. Chilled beams. Testing and rating of passive chilled beams.
EN 14519 : 2005 ; Solid softwood panelling and cladding. Softwood machined profiles with tongue and groove.
EN 14522 : 2005 ; Determination of the auto ignition temperature of gases and vapours.
EN 14525 : 2004 ; Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials : ductile iron, grey iron, steel, PVC-U, PE, fibre-cement.
EN 14527 : 2006+A1 : 2010 ; Shower trays for domestic purposes.
EN 14528 : 2005 ; Bidets. Functional requirements and test methods.
EN 14528 : 2007 ; Bidets. Functional requirements and test methods.
EN 14529 : 2005 ; Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only.
EN 14531-1 : 2005 ; Railway applications. Methods for calculation of stopping distances, slowing distances and immobilization braking. General algorithms
EN 14531-1 : 2015 ; Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking. General algorithms utilizing mean value calculation for train sets or single vehicles
EN 14531-2 : 2015 ; Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking. Step by step calculations for train sets or single vehicles
EN 14531-6 : 2009 ; Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking. Step by step calculations for train sets or single vehicles
EN 14532-3 : 2004 ; Welding consumables. Test methods and quality requirements. Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
EN 14533 : 2015 ; Textiles and textile products. Burning behaviour of bedding items. Classification scheme.
EN 14534 : 2016 ; Postal services. Quality of service. Measurement of the transit time of end-to-end services for bulk mail.
EN 14535-1 : 2005+A1 : 2011 ; Railway applications. Brake discs for railway rolling stock. Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
EN 14535-2 : 2011 ; Railway applications. Brake discs for railway rolling stock. Brake discs mounted onto the wheel, dimensions and quality requirements
EN 14535-3 : 2015 ; Railway applications. Brake discs for railway rolling stock. Brake discs, performance of the disc and the friction couple, classification
EN 14538 : 2006 ; Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES).
EN 14540 : 2014 ; Fire-fighting hoses. Non-percolating layflat hoses for fixed systems.
EN 14543 : 2005+A1 : 2007 ; Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area use.
EN 14545 : 2008 ; Timber structures. Connectors. Requirements.
EN 14546 : 2005 ; Foodstuffs. Determination of trace elements. Determination of total arsenic by hydride generation atomic absorption spectrometry (HGAAS) after dry ashing.
EN 14561 : 2006 ; Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2).
EN 14562 : 2006 ; Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2).
EN 14563 : 2008 ; Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area. Test method and requirements (phase 2, step 2).
EN 14564 : 2013 ; Tanks for transport of dangerous goods. Terminology.
EN 14566 : 2008+A1 : 2009 ; Mechanical fasteners for gypsum plasterboard systems. Definitions, requirements and test methods.
EN 14570 : 2005 ; Equipping of LPG tanks, overground and underground.
EN 14570 : 2014 ; LPG equipment and accessories. Equipping of overground and underground LPG vessels.
EN 14571 : 2005 ; Metallic coatings on nonmetallic basis materials. Measurement of coating thickness. Microresistivity method.
EN 14572 : 2005 ; High performance helmets for equestrian activities.
EN 14574 : 2004 ; Geosynthetics. Determination of the pyramid puncture resistance of supported geosynthetics.
EN 14574 : 2015 ; Geosynthetics. Determination of the pyramid puncture resistance of supported geosynthetics.
EN 14575 : 2005 ; Geosynthetic barriers. Screening test method for determining the resistance to oxidation.
EN 14576 : 2005 ; Geosynthetics. Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking.
EN 14579 : 2004 ; Natural stone test methods. Determination of sound speed propagation.
EN 14580 : 2005 ; Natural stone test methods. Determination of static elastic modulus.
EN 14581 : 2004 ; Natural stone test methods. Determination of linear thermal expansion coefficient.
EN 14582 : 2007 ; Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods.
EN 14582 : 2016 ; Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods.
EN 14584 : 2005 ; Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Planar location of AE sources.
EN 14584 : 2013 ; Non-destructive testing. Acoustic emission testing. Examination of metallic pressure equipment during proof testing. Planar location of AE sources.
EN 14585-1 : 2006 ; Corrugated metal hose assemblies for pressure applications. Requirements
EN 14587-1 : 2007 ; Railway applications. Track. Flash butt welding of rails. New R220, R260, R260Mn and R350HT grade rails in a fixed plant
EN 14587-2 : 2009 ; Railway applications. Track. Flash butt welding of rails. New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant
EN 14587-3 : 2012 ; Railway applications. Track. Flash butt welding of rails. Welding in association with crossing construction
EN 14588 : 2010 ; Solid biofuels. Terminology, definitions and descriptions.
EN 14591-1 : 2004 ; Explosion prevention and protection in underground mines. Protective systems. 2-bar explosion proof ventilation structure
EN 14591-2 : 2007 ; Explosion prevention and protection in underground mines. Protective systems. Passive water trough barriers
EN 14591-4 : 2007 ; Explosion prevention and protection in underground mines. Protective systems. Automatic extinguishing systems for road headers
EN 14592 : 2008+A1 : 2012 ; Timber structures. Dowel type fasteners. Requirements.
EN 14593-1 : 2005 ; Respiratory protective devices. Compressed air line breathing apparatus with demand valve. Apparatus with a full mask. Requirements, testing, marking
EN 14593-2 : 2005 ; Respiratory protective devices. Compressed air line breathing apparatus with demand valve. Apparatus with a half mask at positive pressure. Requirements, testing, marking
EN 14594 : 2005 ; Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking.
EN 14595 : 2005 ; Tanks for transport of dangerous goods. Service equipment for tanks. Pressure and vacuum breather vent.
EN 14595 : 2016 ; Tanks for transport of dangerous goods. Service equipment. Breather device.
EN 14596 : 2005 ; Tanks for transport of dangerous goods. Service equipment for tanks. Emergency pressure relief valve.
EN 14597 : 2005 ; Temperature control devices and temperature limiters for heat generating systems.
EN 14597 : 2012 ; Temperature control devices and temperature limiters for heat generating systems.
EN 14598-1 : 2005 ; Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Designation
EN 14598-2 : 2005 ; Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Methods of test and general requirements
EN 14598-3 : 2005 ; Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Specific requirements
EN 14600 : 2005 ; Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification.
EN 14601 : 2005+A1 : 2010 ; Railway applications. Straight and angled end cocks for brake pipe and main reservoir pipe.
EN 14602 : 2012 ; Footwear. Test methods for the assessment of ecological criteria.
EN 14603 : 2004 ; Information technology. Alphanumeric glyph image set for optical character recognition OCR-B. Shapes and dimensions of the printed image.
EN 14605 : 2005+A1 : 2009 ; Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]).
EN 14607-1 : 2004 ; Space engineering. Mechanical. Thermal control
EN 14607-2 : 2004 ; Space engineering. Mechanical. Structural
EN 14607-6 : 2004 ; Space engineering. Mechanical. Pyrotechnics
EN 14607-7 : 2004 ; Space engineering. Mechanical. Mechanical parts
EN 14607-5-1 : 2004 ; Space engineering. Mechanical. Liquid and electric propulsion for spacecraft
EN 14614 : 2004 ; Water quality. Guidance standard for assessing the hydromorphological features of rivers.
EN 14615 : 2005 ; Postal services. Digital postage marks. Applications, security and design.
EN 14616 : 2004 ; Thermal spraying. Recommendations for thermal spraying.
EN 14617-1 : 2005 ; Agglomerated stone. Test methods. Determination of apparent density and water absorption
EN 14617-1 : 2013 ; Agglomerated stone. Test methods. Determination of apparent density and water absorption
EN 14617-2 : 2004 ; Agglomerated stone. Test methods. Determination of flexural strength (bending)
EN 14617-2 : 2008 ; Agglomerated stone. Test methods. Determination of flexural strength (bending)
EN 14617-2 : 2016 ; Agglomerated stone. Test methods. Determination of flexural strength (bending)
EN 14617-4 : 2005 ; Agglomerated stone. Test methods. Determination of abrasion resistance
EN 14617-4 : 2012 ; Agglomerated stone. Test methods. Determination of the abrasion resistance
EN 14617-5 : 2005 ; Agglomerated stone. Test methods. Determination of freeze and thaw resistance
EN 14617-5 : 2012 ; Agglomerated stone. Test methods . Determination of freeze and thaw resistance
EN 14617-6 : 2005 ; Agglomerated stone. Test methods. Determination of thermal shock resistance
EN 14617-6 : 2012 ; Agglomerated stone. Test methods. Determination of thermal shock resistance
EN 14617-8 : 2007 ; Agglomerated stone. Test methods. Determination of resistance to fixing (dowel hole)
EN 14617-9 : 2005 ; Agglomerated stone. Test methods. Determination of impact resistance
EN 14617-10 : 2005 ; Agglomerated stone. Test methods. Determination of chemical resistance
EN 14617-10 : 2012 ; Agglomerated stone. Test methods. Determination of chemical resistance
EN 14617-11 : 2005 ; Agglomerated stone. Test methods. Determination of linear thermal expansion coefficient
EN 14617-12 : 2005 ; Agglomerated stone. Test methods. Determination of dimensional stability
EN 14617-12 : 2012 ; Agglomerate stone. Test methods. Determination of dimensional stability
EN 14617-13 : 2005 ; Agglomerated stone. Test methods. Determination of electrical resistivity
EN 14617-13 : 2013 ; Agglomerated stone. Test methods. Determination of electrical resistivity
EN 14617-15 : 2005 ; Agglomerated stone. Test methods. Determination of compressive strength
EN 14617-16 : 2005 ; Agglomerated stone. Test methods. Determination of dimensions, geometric characteristics and surface quality of modular tiles
EN 14618 : 2005 ; Agglomerated stone. Terminology and classification.
EN 14618 : 2009 ; Agglomerated stone. Terminology and classification.
EN 14619 : 2005 ; Roller sports equipment. Kick scooters. Safety requirements and test methods.
EN 14619 : 2015 ; Roller sports equipment. Kick scooters. Safety requirements and test methods.
EN 14620-1 : 2006 ; Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0^DC and -165^DC. General
EN 14620-2 : 2006 ; Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0^DC and -165^DC. Metallic components
EN 14620-3 : 2006 ; Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0^DC and -165^DC. Concrete components
EN 14620-4 : 2006 ; Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0^DC and -165^DC. Insulation components
EN 14620-5 : 2006 ; Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0^DC and -165^DC. Testing, drying, purging and cool-down
EN 14621 : 2005 ; Textiles. Multifilament yarns. Methods of test for textured or non-textured filament yarns.
EN 14622 : 2005 ; Devices to prevent pollution by backflow of potable water. Air gap with circular overflow (restricted). Family A, type F.
EN 14623 : 2005 ; Devices to prevent pollution by backflow of potable water. Air gaps with minimum circular overflow (verified by test or measurement). Family A, type G.
EN 14624 : 2005 ; Performances of mobile leak detectors and of room controllers of halogenated refrigerants.
EN 14624 : 2012 ; Performance of portable leak detectors and of room monitors for halogenated refrigerants.
EN 14625 : 2005 ; Ambient air quality. Standard method for the measurement of the concentration of ozone by ultraviolet photometry.
EN 14625 : 2012 ; Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry.
EN 14626 : 2005 ; Ambient air quality. Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy.
EN 14626 : 2012 ; Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy.
EN 14627 : 2005 ; Foodstuffs. Determination of trace elements. Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion.
EN 14628 : 2005 ; Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods.
EN 14629 : 2007 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of chloride content in hardened concrete.
EN 14630 : 2006 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of carbonation depth in hardened concrete by the phenolphthalein method.
EN 14634 : 2006 ; Glass packaging. 26 H 180 crown finish. Dimensions.
EN 14634 : 2010 ; Glass packaging. 26 H 180 crown finish. Dimensions.
EN 14635 : 2006 ; Glass packaging. 26 H 126 crown finish. Dimensions.
EN 14635 : 2010 ; Glass packaging. 26 H 126 crown finish. Dimensions.
EN 14636-1 : 2009 ; Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Pipes and fittings with flexible joints
EN 14636-2 : 2009 ; Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Manholes and inspection chambers
EN 14637 : 2007 ; Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance.
EN 14638-1 : 2006 ; Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres. Welded austenitic stainless steel cylinders made to a design justified by experimental methods
EN 14638-3 : 2010 ; Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres. Welded carbon steel cylinders made to a design justified by experimental methods
EN 14639 : 2005 ; Crude tar and crude benzole. Characteristics and test methods.
EN 14640 : 2005 ; Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification.
EN 14647 : 2005 ; Calcium aluminate cement. Composition, specifications and conformity criteria.
EN 14648 : 2007 ; Building hardware. Fittings for shutters. Requirements and test methods.
EN 14649 : 2005 ; Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test).
EN 14650 : 2005 ; Precast concrete products. General rules for factory production control of metallic fibered concrete.
EN 14651 : 2005+A1 : 2007 ; Test method for metallic fibre concrete. Measuring the flexural tensile strength (limit of proportionality (LOP), residual).
EN 14652 : 2005+A1 : 2007 ; Water conditioning equipment inside buildings. Membrane separation devices. Requirements for performance, safety and testing.
EN 14653-1 : 2005 ; Manually operated hydraulic shoring systems for groundwork support. Product specifications
EN 14653-2 : 2005 ; Manually operated hydraulic shoring systems for groundwork support. Assessment by calculation or test
EN 14654-1 : 2005 ; Management and control of cleaning operations in drains and sewers. Sewer cleaning
EN 14654-1 : 2014 ; Management and control of operational activities in drain and sewer systems outside buildings. Cleaning
EN 14654-2 : 2013 ; Management and control of operational activities in drain and sewer systems outside buildings. Rehabilitation
EN 14655 : 2005+A1 : 2010 ; Food processing machinery. Baguette slicers. Safety and hygiene requirements.
EN 14656 : 2006+A1 : 2010 ; Safety of machinery. Safety requirements for extrusion presses for steel and non-ferrous metals.
EN 14658 : 2005+A1 : 2010 ; Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining.
EN 14662-1 : 2005 ; Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by thermal desorption and gas chromatography
EN 14662-2 : 2005 ; Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by solvent desorption and gas chromatography
EN 14662-3 : 2005 ; Ambient air quality. Standard method for measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
EN 14662-3 : 2015 ; Ambient air. Standard method for the measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
EN 14662-4 : 2005 ; Ambient air quality. Standard method for measurement of benzene concentrations. Diffusive sampling followed by thermal desorption and gas chromatography
EN 14662-5 : 2005 ; Ambient air quality. Standard method for measurement of benzene concentrations. Diffusive sampling followed by solvent desorption and gas chromatography
EN 14663 : 2005 ; Foodstuffs. Determination of vitamin B6 (including its glycosylated forms) by HPLC.
EN 14665 : 2004 ; Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings.
EN 14666 : 2005 ; Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic method.
EN 14667 : 2005 ; Surface active agents. Determination of low boiling solvents in liquid formulations. Gas chromatographic method.
EN 14668 : 2005 ; Surface active agents. Determination of quaternary ammonium surface active agents in raw materials and formulated products. Potentiometric two-phase titration method.
EN 14669 : 2005 ; Surface active agents. Determination of anionic surface active agents and soaps in detergents and cleansers. Potentiometric two-phase titration method.
EN 14670 : 2005 ; Surface active agents. Sodium dodecyl sulfate. Analytical method.
EN 14671 : 2006 ; Characterization of sludges. Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride.
EN 14672 : 2005 ; Characterization of sludges. Determination of total phosphorous.
EN 14673 : 2006+A1 : 2010 ; Safety of machinery. Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals.
EN 14675 : 2006 ; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary field. Test method and requirements (phase 2, step 1).
EN 14675 : 2015 ; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (Phase 2, step 1).
EN 14677 : 2008 ; Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel.
EN 14678-1 : 2006+A1 : 2009 ; LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
EN 14678-1 : 2013 ; LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
EN 14678-2 : 2007+A1 : 2012 ; LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Components other than dispensers and installation requirements
EN 14678-3 : 2013 ; LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Refuelling installations at commercial and industrial premises
EN 14679 : 2005 ; Execution of special geotechnical works. Deep mixing.
EN 14680 : 2006 ; Adhesives for non-pressure thermoplastic piping systems. Specifications.
EN 14680 : 2015 ; Adhesives for non-pressure thermoplastics piping systems. Specifications.
EN 14681 : 2006+A1 : 2010 ; Safety of machinery. Safety requirements for machinery and equipment for production of steel by electric arc furnaces.
EN 14682 : 2004 ; Safety of children’s clothing. Cords and drawstrings on children’s clothing. Specifications.
EN 14682 : 2007 ; Safety of children’s clothing. Cords and drawstrings on children’s clothing. Specifications.
EN 14682 : 2014 ; Safety of children’s clothing. Cords and drawstrings on children’s clothing. Specifications.
EN 14683 : 2005 ; Surgical masks. Requirements and test methods.
EN 14683 : 2014 ; Medical face masks. Requirements and test methods.
EN 14688 : 2006 ; Sanitary appliances. Wash basins. Functional requirements and test methods.
EN 14691 : 2005 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioning.
EN 14692 : 2005 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the resistance to compaction of an asphalt layer.
EN 14693 : 2006 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of bitumen sheets during application of mastic asphalt.
EN 14694 : 2005 ; Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of resistance to dynamic water pressure after damage by pre-treatment.
EN 14695 : 2010 ; Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics.
EN 14697 : 2005 ; Textiles. Terry towels and terry towel fabrics. Specifications and methods of test.
EN 14700 : 2005 ; Welding consumables. Welding consumables for hard-facing.
EN 14700 : 2014 ; Welding consumables. Welding consumables for hard-facing.
EN 14701-1 : 2006 ; Characterization of sludges. Filtration properties. Capillary suction time (CST)
EN 14701-2 : 2006 ; Characterization of sludges. Filtration properties. Determination of the specific resistance to filtration
EN 14701-2 : 2013 ; Characterisation of sludges. Filtration properties. Determination of the specific resistance to filtration
EN 14701-3 : 2006 ; Characterization of sludges. Filtration properties. Determination of the compressibility
EN 14701-4 : 2010 ; Characterization of sludges. Filtration properties. Determination of the drainability of flocculated sludges
EN 14702-1 : 2006 ; Characterization of sludges. Settling properties. Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
EN 14702-2 : 2006 ; Characterisation of sludges. Settling properties. Determination of thickenability
EN 14703 : 2007 ; Furniture. Links for non-domestic seating linked together in a row. Strength requirements and test methods.
EN 14704-1 : 2005 ; Determination of the elasticity of fabrics. Strip tests
EN 14704-2 : 2007 ; Determination of the elasticity of fabrics. Multiaxial tests
EN 14704-3 : 2006 ; Determination of the elasticity of fabrics. Narrow fabrics
EN 14705 : 2005 ; Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers.
EN 14706 : 2005 ; Thermal insulation products for building equipment and industrial installations. Determination of maximum service temperature.
EN 14706 : 2012 ; Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature.
EN 14707 : 2005+A1 : 2007 ; Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation.
EN 14707 : 2012 ; Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation.
EN 14710-1 : 2005+A2 : 2008 ; Fire-fighting pumps. Fire-fighting centrifugal pumps without primer. Classification, general and safety requirements
EN 14710-2 : 2005+A2 : 2008 ; Fire-fighting pumps. Fire-fighting centrifugal pumps without primer. Verification of general and safety requirements
EN 14712 : 2005 ; Surface active agents. Determination of physical stability in alkaline and acid solutions.
EN 14713 : 2005 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding.
EN 14713 : 2016 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding.
EN 14714 : 2005 ; Inland navigation vessels. Connection nozzle for equipment and devices at cargo tanks. Dimensions.
EN 14716 : 2004 ; Stretched ceilings. Requirements and test methods.
EN 14717 : 2005 ; Welding and allied processes. Environmental check list.
EN 14718 : 2006 ; Influence of organic materials on water intended for human consumption. Determination of the chlorine demand. Test method.
EN 14718 : 2014 ; Influence of organic materials on water intended for human consumption. Determination of the chlorine demand. Test method.
EN 14719 : 2005 ; Pulp, paper and board. Determination of the diisopropylnaphthalene (DIPN) content by solvent extraction.
EN 14721 : 2005+A1 : 2007 ; Test method for metallic fibre concrete. Measuring the fibre content in fresh and hardened concrete.
EN 14726 : 2005 ; Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis.
EN 14727 : 2005 ; Laboratory furniture. Storage units for laboratories. Requirements and test methods.
EN 14728 : 2005 ; Imperfections in thermoplastic welds. Classification.
EN 14730-1 : 2006+A1 : 2010 ; Railway applications. Track. Aluminothermic welding of rails. Approval of welding processes
EN 14730-2 : 2006 ; Railway applications. Track. Aluminothermic welding of rails. Qualifications of aluminothermic welders, approval of contractors and acceptance of welds
EN 14731 : 2005 ; Execution of special geotechnical works. Ground treatment by deep vibration.
EN 14733 : 2005+A1 : 2010 ; Bitumen and bituminous binders. Bituminous emulsions, fluxed and cut-back bitumen factory production control.
EN 14735 : 2005 ; Characterization of waste. Preparation of waste samples for ecotoxicity tests.
EN 14741 : 2006 ; Thermoplastics piping and ducting systems. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure.
EN 14742 : 2015 ; Characterization of sludges. Laboratory chemical conditioning procedure.
EN 14743 : 2005+A1 : 2007 ; Water conditioning equipment inside buildings. Softeners. Requirements for performance, safety and testing.
EN 14744 : 2005 ; Inland navigation vessels and sea-going vessels. Navigation light.
EN 14749 : 2005 ; Domestic and kitchen storage units and worktops. Safety requirements and test methods.
EN 14749 : 2016 ; Furniture. Domestic and kitchen storage units and kitchen-worktops. Safety requirements and test methods.
EN 14750-1 : 2006 ; Railway applications. Air conditioning for urban and suburban rolling stock. Comfort parameters
EN 14750-2 : 2006 ; Railway applications. Air conditioning for urban and suburban rolling stock. Type tests
EN 14752 : 2005 ; Railway applications. Body entrance systems.
EN 14752 : 2015 ; Railway applications. Body side entrance systems for rolling stock.
EN 14753 : 2007 ; Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel.
EN 14756 : 2006 ; Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours.
EN 14757 : 2005 ; Water quality. Sampling of fish with multi-mesh gillnets.
EN 14757 : 2015 ; Water quality. Sampling of fish with multi-mesh gillnets.
EN 14758-1 : 2005+A1 : 2009 ; Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD). Specifications for pipes, fittings and the system
EN 14758-1 : 2012 ; Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD). Specifications for pipes, fittings and the system
EN 14759 : 2005 ; Shutters. Acoustic insulation relative to airborne sound. Expression of performance.
EN 14761 : 2006+A1 : 2008 ; Wood flooring. Solid wood parquet. Vertical finger and module brick.
EN 14762 : 2006 ; Wood flooring. Sampling procedures for evaluation of conformity.
EN 14763 : 2005 ; LPG equipment and accessories. Transportable refillable composite cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after filling.
EN 14764 : 2005 ; City and trekking bicycles. Safety requirements and test methods.
EN 14765 : 2005+A1 : 2008 ; Bicycles for young children. Safety requirements and test methods.
EN 14766 : 2005 ; Mountain-bicycles. Safety requirements and test methods.
EN 14767 : 2005 ; LPG equipment and accessories. Transportable refillable composite cylinders for liquefied petroleum gas (LPG). Periodic inspection.
EN 14768 : 2005 ; Fibreboard drums. Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l.
EN 14769 : 2005 ; Methods of test for petroleum and its products. Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a pressure ageing vessel (PAV).
EN 14769 : 2012 ; Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV).
EN 14770 : 2005 ; Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR).
EN 14770 : 2012 ; Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR).
EN 14771 : 2005 ; Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR).
EN 14771 : 2012 ; Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR).
EN 14772 : 2005 ; Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 ;
EN 14774-1 : 2009 ; Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Reference method
EN 14774-2 : 2009 ; Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Simplified method
EN 14774-3 : 2009 ; Solid biofuels. Determination of moisture content. Oven dry method. Moisture in general analysis sample
EN 14775 : 2009 ; Solid biofuels. Determination of ash content.
EN 14781 : 2005 ; Racing bicycles. Safety requirements and test methods.
EN 14782 : 2006 ; Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements.
EN 14783 : 2006 ; Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements.
EN 14783 : 2013 ; Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements.
EN 14784-1 : 2005 ; Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. Classification of systems
EN 14784-2 : 2005 ; Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. General principles for testing of metallic materials using X-rays and gamma rays
EN 14785 : 2006 ; Residential space heating appliances fired by wood pellets. Requirements and test methods.
EN 14786 : 2006 ; Protective clothing. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions. Atomizer test.
EN 14787 : 2005 ; Fertilizers and liming materials. Determination of water content. Guidelines and recommendations.
EN 14789 : 2005 ; Stationary source emissions. Determination of volume concentration of oxygen (O$d2). Reference method. Paramagnetism.
EN 14790 : 2005 ; Stationary source emissions. Determination of the water vapour in ducts.
EN 14791 : 2005 ; Stationary source emissions. Determination of mass concentration of sulphur dioxide. Reference method.
EN 14792 : 2005 ; Stationary source emissions. Determination of mass concentration of nitrogen oxides (NOx). Reference method : Chemiluminescence.
EN 14794 : 2005 ; LPG equipment and accessories. Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after filling.
EN 14795 : 2005 ; LPG equipment and accessories. Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG). Periodic inspection.
EN 14798 : 2005 ; Glass packaging. Hand-held crown bottle openers. Dimensions.
EN 14799 : 2007 ; Air filters for general air cleaning. Terminology.
EN 14800 : 2007 ; Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels.
EN 14801 : 2006 ; Conditions for pressure classification of products for water and wastewater pipelines.
EN 14802 : 2005 ; Plastics piping systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading.
EN 14803 : 2006 ; Identification and/or determination of the quantity of waste.
EN 14804 : 2005 ; Language study tour providers. Requirements.
EN 14805 : 2008 ; Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using non-membrane technology.
EN 14806 : 2005 ; Packaging. Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test.
EN 14808 : 2005 ; Surfaces for sports areas. Determination of shock absorption.
EN 14809 : 2005 ; Surfaces for sports areas. Determination of vertical deformation.
EN 14810 : 2006 ; Surfaces for sports areas. Determination of spike resistance.
EN 14811 : 2006+A1 : 2009 ; Railway applications. Track. Special purpose rail. Grooved and associated construction.
EN 14812 : 2005+A1 : 2007 ; Water conditioning equipment inside buildings. Chemical dosing systems. Pre-set dosing systems. Requirements for performance, safety and testing.
EN 14813-1 : 2006+A1 : 2010 ; Railway applications. Air conditioning for driving cabs. Comfort parameters
EN 14813-2 : 2006+A1 : 2010 ; Railway applications. Air conditioning for driving cabs. Type tests
EN 14814 : 2007 ; Adhesives for thermoplastic piping systems for fluids under pressure. Specifications.
EN 14814 : 2016 ; Adhesives for thermoplastic piping systems for fluids under pressure. Specifications.
EN 14817 : 2006 ; Railway applications. Suspension components. Air-spring control elements.
EN 14822-1 : 2005 ; Health Informatics. General purpose information components. Overview
EN 14822-2 : 2005 ; Health Informatics. General purpose information components. Non-clinical
EN 14822-3 : 2005 ; Health informatics. General purpose information components. Clinical
EN 14825 : 2012 ; Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance.
EN 14825 : 2013 ; Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance.
EN 14825 : 2016 ; Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance.
EN 14829 : 2007 ; Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW.
EN 14830 : 2006 ; Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance.
EN 14831 : 2005 ; Fasteners. Tightening performance. Torque/Angle simplified test method.
EN 14832 : 2005 ; Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids.
EN 14833 : 2005 ; Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids.
EN 14836 : 2005 ; Synthetic surfaces for outdoor sports areas. Exposure to artificial weathering.
EN 14837 : 2006 ; Surfaces for sports areas. Determination of slip resistance.
EN 14840 : 2005 ; Joint fillers and sealants. Test methods for preformed joint seals.
EN 14841 : 2005 ; LPG equipment and accessories. Discharge procedures for LPG rail tankers.
EN 14841 : 2013 ; LPG equipment and accessories. Discharge procedures for LPG rail tankers.
EN 14844 : 2006+A2 : 2011 ; Precast concrete products. Box culverts.
EN 14845-1 : 2007 ; Test methods for fibres in concrete. Reference concretes
EN 14845-2 : 2006 ; Test methods for fibres in concrete. Effect on concrete
EN 14846 : 2008 ; Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods.
EN 14847 : 2005 ; Aerosol containers. Tinplate containers. Dimensions of the 25,4 mm (one inch) aperture.
EN 14848 : 2005 ; Aerosol containers. Metal containers with 25,4 mm aperture. Dimensions of valve cups.
EN 14849 : 2005 ; Aerosol containers. Glass containers. Dimensions of aerosol valve ferrules.
EN 14850 : 2005 ; Aerosol containers. Metal containers with 25,4 mm aperture. Measurement of contact height.
EN 14851 : 2005 ; Aerosol containers. Aerosol foam flammability test.
EN 14852 : 2006 ; Aerosol containers. Determination of the ignition distance of the spray jet.
EN 14853 : 2005 ; Aerosol containers. Enclosed space ignition test.
EN 14854 : 2005 ; Aerosol containers. Glass containers. Dimensions of the neck finish.
EN 14861 : 2004+A1 : 2009 ; Forest machinery. Self propelled machinery. Safety requirements.
EN 14863 : 2005 ; Vitreous and porcelain enamels. Determination of the edge covering of enamelled steel plate to be used in heat exchangers.
EN 14864 : 2005 ; Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification.
EN 14865-1 : 2009+A1 : 2010 ; Railway applications. Axlebox lubricating greases. Method to test the ability to lubricate
EN 14865-2 : 2006+A2 : 2010 ; Railway applications. Axlebox lubricating greases. Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
EN 14866 : 2005 ; Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications.
EN 14867 : 2005 ; Packaging. Plastic freezer bags. Specifications and test methods.
EN 14868 : 2005 ; Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems.
EN 14869-1 : 2011 ; Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders
EN 14869-2 : 2011 ; Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test
EN 14870-1 : 2011 ; Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Induction bends
EN 14870-2 : 2004 ; Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Fittings
EN 14870-3 : 2006 ; Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Flanges
EN 14872 : 2006 ; Bicycles. Accessories for bicycles. Luggage carriers.
EN 14873-1 : 2005 ; Furniture removal activities. Storage of furniture and personal effects for private individuals. Specification for storage facility and related storage provision
EN 14873-2 : 2005 ; Storage of furniture and personal effects for private individuals. Provision of the service
EN 14874 : 2005 ; Inland navigation vessels. Studless anchor chain. Cable lifter.
EN 14876 : 2007 ; Transportable gas cylinders. Periodic inspection and testing of welded steel pressure drums.
EN 14877 : 2006 ; Synthetic surfaces for outdoor sports areas. Specification.
EN 14877 : 2013 ; Synthetic surfaces for outdoor sports areas. Specification.
EN 14878 : 2007 ; Textiles. Burning behaviour of childrens nightwear. Specification.
EN 14879-1 : 2005 ; 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Terminology, design and preparation of substrate
EN 14879-2 : 2006 ; Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Coatings on metallic components
EN 14879-3 : 2006 ; Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Coatings on concrete components
EN 14879-4 : 2007 ; Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Linings on metallic components
EN 14879-5 : 2007 ; Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Linings on concrete components
EN 14879-6 : 2009 ; Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Combined linings with tile and brick layers
EN 14880 : 2005 ; Surface active agents. Determination of inorganic sulfate content in anionic surface active agents. Potentiometric lead selective electrode titration method.
EN 14881 : 2005 ; Surface active agents. Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines. Gas chromatographic method.
EN 14882 : 2005 ; Rubber or plastic coated fabrics. Determination of the static and dynamic coefficient of friction.
EN 14884 : 2005 ; Air quality. Stationary source emissions. Determination of total mercury : automated measuring systems.
EN 14885 : 2006 ; Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics.
EN 14885 : 2015 ; Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics.
EN 14886 : 2008 ; Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements.
EN 14887 : 2005 ; Glass packaging. Cork removal devices. General requirements.
EN 14888 : 2005 ; Fertilizers and liming materials. Determination of cadmium content.
EN 14889-1 : 2006 ; Fibres for concrete. Steel fibres. Definitions, specifications and conformity
EN 14889-2 : 2006 ; Fibres for concrete. Polymer fibres. Definitions, specifications and conformity
EN 14890-1 : 2008 ; Application interface for smart cards used as secure signature creation devices. Basic services
EN 14890-2 : 2008 ; Application interface for smart cards used as secure signature creation devices. Additional services
EN 14891 : 2007 ; Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, evaluation of conformity, classification and designation.
EN 14891 : 2012 ; Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, evaluation of conformity, classification and designation.
EN 14892 : 2005 ; Transport service. City logistics. Guideline for the definition of limited access to city centres.
EN 14893 : 2006 ; LPG equipment and accessories. Transportable liquefied petroleum gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres.
EN 14893 : 2014 ; LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres.
EN 14894 : 2006 ; LPG equipment and accessories. Cylinder and drum marking.
EN 14894 : 2011 ; LPG equipment and accessories. Cylinder and drum marking.
EN 14894 : 2013 ; LPG equipment and accessories. Cylinder and drum marking.
EN 14895 : 2006 ; Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders.
EN 14896 : 2006 ; Bitumen and bituminous binders. Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders. Rotating spindle viscometer method.
EN 14897 : 2006+A1 : 2007 ; Water conditioning equipment inside buildings. Devices using mercury low-pressure ultraviolet radiators. Requirements for performance, safety and testing.
EN 14898 : 2006+A1 : 2007 ; Water conditioning equipment inside buildings. Active media filters. Requirements for performance, safety and testing.
EN 14899 : 2005 ; Characterization of waste. Sampling of waste materials. Framework for the preparation and application of a sampling plan.
EN 14900 : 2006 ; Textile floor coverings. Determination of the density of the textile fleece backing.
EN 14901 : 2006 ; Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods.
EN 14901 : 2014 ; Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods.
EN 14902 : 2005 ; Ambient air quality. Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter.
EN 14904 : 2006 ; Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification.
EN 14906 : 2012 ; Leather. Leather for automotive. Test methods and testing parameters.
EN 14907 : 2005 ; Ambient air quality. Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter.
EN 14908-1 : 2005 ; Open data communication in building automation, controls and building management. Building network protocol. Protocol stack
EN 14908-1 : 2014 ; Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Protocol Stack
EN 14908-2 : 2005 ; Open data communication in building automation, controls and building management. Control network protocol. Twisted pair communication
EN 14908-2 : 2014 ; Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Twisted Pair Communication
EN 14908-3 : 2006 ; Open data communication in building automation, controls and building management. Control network protocol. Power line channel specification
EN 14908-3 : 2014 ; Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Power Line Channel Specification
EN 14908-4 : 2006 ; Open data communication in building automation, controls and building management. Control network protocol. IP communication
EN 14908-4 : 2014 ; Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. IP Communication
EN 14908-5 : 2009 ; Open data communication in building automation, controls and building management implementation guideline. Control network protocol. Implementation
EN 14908-6 : 2010 ; Open data communication in building automation, controls and building management. Control network protocol. Application elements
EN 14908-6 : 2014 ; Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Application elements
EN 14909 : 2006 ; Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics.
EN 14909 : 2012 ; Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics.
EN 14910 : 2007+A1 : 2009 ; Garden equipment. Walk-behind combustion engine powered trimmers. Safety.
EN 14912 : 2005 ; LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders.
EN 14912 : 2015 ; LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders.
EN 14913 : 2005 ; LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Procedure for checking before, during and after filling.
EN 14914 : 2005 ; LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Periodic inspection.
EN 14915 : 2006 ; Solid wood panelling and cladding. Characteristics, evaluation of conformity and marking.
EN 14915 : 2013 ; Solid wood panelling and cladding. Characteristics, evaluation of conformity and marking.
EN 14916 : 2005 ; Domestic cookware. Graphical symbols (pictograms).
EN 14917 : 2009+A1 : 2012 ; Metal bellows expansion joints for pressure applications.
EN 14918 : 2009 ; Solid biofuels. Determination of calorific value.
EN 14930 : 2007+A1 : 2009 ; Agricultural and forestry machinery and gardening equipment. Pedestrian controlled and hand-held machines. Determination of accessibility of hot surfaces.
EN 14931 : 2006 ; Pressure vessels for human occupancy (PVHO). Multi-place pressure chambers for hyperbaric therapy. Performance, safety requirements and testing.
EN 14932 : 2006 ; Plastics. Stretch thermoplastic films for wrapping bales. Requirements and test methods.
EN 14933 : 2007 ; Thermal insulation and light weight fill products for civil engineering applications. Factory made products of expanded polystyrene (EPS). Specification.
EN 14934 : 2007 ; Thermal insulation and light weight fill products for civil engineering applications. Factory made products of extruded polystyrene foam (XPS). Specification.
EN 14935 : 2006 ; Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method.
EN 14936-1 : 2006 ; Copper and copper alloys. Determination of aluminium content. Titrimetric method
EN 14936-2 : 2006 ; Copper and copper alloys. Determination of aluminium content. FAAS method
EN 14937-1 : 2006 ; Copper and copper alloys. Determination of antimony content. Spectrophotometric method
EN 14937-2 : 2006 ; Copper and copper alloys. Determination of antimony content. FAAS method
EN 14938-2 : 2010 ; Copper and copper alloys. Determination of bismuth content. Flame atomic absorption spectrometric method (FAAS)
EN 14939 : 2006 ; Copper and copper alloys. Determination of beryllium content. FAAS Method.
EN 14940-2 : 2006 ; Copper and copper alloys. Determination of chromium content. FAAS method
EN 14941 : 2006 ; Copper and copper alloys. Determination of cobalt content. FAAS method.
EN 14942-2 : 2006 ; Copper and copper alloys. Determination of arsenic content. FAAS method
EN 14943 : 2005 ; Transport services. Logistics. Glossary of terms.
EN 14944-1 : 2006 ; Influence of cementitious products on water intended for human consumption. Test methods. Influence of factory made cementitious products on organoleptic parameters
EN 14944-3 : 2007 ; Influence of cementitious products on water intended for human consumption. Test methods. Migration of substances from factory-made cementitious products
EN 14945 : 2005 ; Refractory products and materials. Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use.
EN 14951 : 2006 ; Solid hardwood paneling and cladding. Machined profiles elements.
EN 14952 : 2005 ; Surfaces for sports areas. Determination of water absorption of unbound minerals.
EN 14953 : 2005 ; Surfaces for sport areas. Determination of thickness of unbound mineral surfaces for outdoor sports areas.
EN 14954 : 2005 ; Surfaces for sports areas. Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas.
EN 14955 : 2005 ; Surfaces for sports areas. Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas.
EN 14956 : 2005 ; Surfaces for sports areas. Determination of water content of unbound mineral surfaces for outdoor sports areas.
EN 14957 : 2006+A1 : 2010 ; Food processing machinery. Dishwashing machines with conveyor. Safety and hygiene requirements.
EN 14958 : 2006+A1 : 2009 ; Food processing machinery. Machinery for grinding and processing flour and semolina. Safety and hygiene requirements.
EN 14959 : 2006 ; Touch and close fasteners. Determination of resistance to fraying after washing.
EN 14960 : 2006 ; Inflatable play equipment. Safety requirements and test methods.
EN 14960 : 2013 ; Inflatable play equipment. Safety requirements and test methods.
EN 14961-1 : 2010 ; Solid biofuels. Fuel specifications and classes. General requirements
EN 14961-2 : 2011 ; Solid biofuels. Fuel specifications and classes. Wood pellets for non-industrial use
EN 14961-3 : 2011 ; Solid biofuels. Fuel specifications and classes. Wood briquettes for non-industrial use
EN 14961-4 : 2011 ; Solid biofuels. Fuel specifications and classes. Wood chips for non-industrial use
EN 14961-5 : 2011 ; Solid biofuels. Fuel specifications and classes. Firewood for non-industrial use
EN 14961-6 : 2012 ; Solid biofuels. Fuel specifications and classes. Non-woody pellets for non-industrial use
EN 14962 : 2006 ; Water quality. Guidance on the scope and selection of fish sampling methods.
EN 14963 : 2006 ; Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods.
EN 14964 : 2006 ; Rigid underlays for discontinuous roofing. Definitions and characteristics.
EN 14967 : 2006 ; Flexible sheets for waterproofing. Bitumen damp proof courses. Definitions and characteristics.
EN 14968 : 2006 ; Semantics for groundwater data interchange .
EN 14969 : 2006 ; Railway applications. Track. Qualification system for railway trackwork contractors.
EN 14970 : 2006 ; Textiles. Knitted fabrics. Determination of stitch length and yarn linear density in weft knitted fabrics.
EN 14971 : 2006 ; Textiles. Knitted fabrics. Determination of number of stitches per unit of length and unit area.
EN 14973 : 2006+A1 : 2008 ; Conveyor belts for use in underground installations. Electrical and flammability safety requirements.
EN 14973 : 2015 ; Conveyor belts for use in underground installations. Electrical and flammability safety requirements.
EN 14974 : 2006+A1 : 2010 ; Facilities for users of roller sports equipment. Safety requirements and test methods.
EN 14975 : 2006+A1 : 2010 ; Loft ladders. Requirements, marking and testing.
EN 14976 : 2005 ; Textiles. Mattress tickings. Specification and test methods.
EN 14977 : 2006 ; Copper and copper alloys. Detection of tensile stress. 5% ammonia test.
EN 14978 : 2006 ; Laminate floor coverings. Elements with acrylic based surface layer, electron beam cured. Specifications, requirements and test methods.
EN 14978 : 2016 ; Laminate floor coverings. Elements with acrylic based surface layer, electron beam cured. Specifications, requirements and test methods.
EN 14979 : 2006 ; Packaging. Flexible plastic/metal laminate tubes. Dimensions and tolerances of nozzle S 13 ;
EN 14981 : 2006 ; Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC.
EN 14982 : 2006+A1 : 2010 ; Plastics piping and ducting systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness.
EN 14983 : 2007 ; Explosion prevention and protection in underground mines. Equipment and protective systems for firedamp drainage.
EN 14984 : 2006 ; Liming materials. Determination of product effect on soil pH. Soil incubation method.
EN 14984 : 2016 ; Liming materials. Determination of product effect on soil pH. Soil incubation method.
EN 14986 : 2007 ; Design of fans working in potentially explosive atmospheres.
EN 14987 : 2006 ; Plastics. Evaluation of disposability in waste water treatment plants. Test scheme for final acceptance and specifications.
EN 14988-1 : 2006+A1 : 2012 ; Children’s high chairs. Safety requirements
EN 14988-2 : 2006+A1 : 2012 ; Children’s high chairs. Test methods
EN 14989-1 : 2007 ; Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications. Vertical air/flue terminals for C6-type appliances
EN 14989-2 : 2007 ; Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications. Flue and air supply ducts for room sealed appliances
EN 14991 : 2007 ; Precast concrete products. Foundation elements.
EN 14992 : 2007+A1 : 2012 ; Precast concrete products. Wall elements.
EN 14995 : 2006 ; Plastics. Evaluation of compostability. Test scheme and specifications.
EN 14996 : 2006 ; Water quality. Guidance on assuring the quality of biological and ecological assessments in the aquatic environment.
EN 14997 : 2015 ; Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH control.
EN 14998 : 2005 ; Derivatives from coal pyrolysis. Coal tar based oils : fluxings oils. Specifications and test methods.
EN 15000 : 2008 ; Safety of industrial trucks. Self propelled variable reach trucks. Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters.
EN 15001-1 : 2009 ; Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations. Detailed functional requirements for design, materials, construction, inspection and testing
EN 15001-2 : 2008 ; Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations. Detailed functional requirements for commissioning, operation and maintenance
EN 15002 : 2006 ; Characterization of waste. Preparation of test portions from the laboratory sample.
EN 15002 : 2015 ; Characterization of waste. Preparation of test portions from the laboratory sample.
EN 15004-1 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Design, installation and maintenance
EN 15004-2 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant
EN 15004-3 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant
EN 15004-4 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant
EN 15004-5 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant
EN 15004-6 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant
EN 15004-7 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-01 extinguishant
EN 15004-8 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-100 extinguishant
EN 15004-9 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-55 extinguishant
EN 15004-10 : 2008 ; Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-541 extinguishant
EN 15006 : 2006 ; Metal aerosol containers. Aluminium containers. Dimensions of the 25,4 mm aperture.
EN 15007 : 2006 ; Metal aerosol containers. Tinplate containers. Dimensions of two and three-piece cans.
EN 15008 : 2006 ; Aerosol containers. Aluminium containers. Dimensions of one-piece cans with 25,4 mm aperture.
EN 15009 : 2006 ; Aerosol containers. Compartmented aerosol containers.
EN 15010 : 2006 ; Aerosol containers. Aluminium containers. Tolerances of the fundamental dimensions in connection with the clinch.
EN 15012 : 2007 ; Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints.
EN 15014 : 2007 ; Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints.
EN 15015 : 2007 ; Plastics piping systems. Systems for hot and cold water not intended for human consumption. Performance characteristics for pipes, fittings and their joints.
EN 15016-1 : 2004 ; Technical drawings. Railway applications. General Principles
EN 15016-2 : 2004 ; Technical drawings. Railway applications. Parts lists
EN 15016-3 : 2004 ; Technical drawings. Railway applications. Handling of modifications of technical documents
EN 15016-4 : 2006 ; Technical drawings. Railway applications. Data exchange
EN 15020 : 2006+A1 : 2010 ; Railway applications. Rescue coupler. Performance requirements, specific interface geometry and test methods.
EN 15022-3 : 2006 ; Copper and copper alloys. Determination of tin content. Low tin content. Flame atomic absorption spectrometry method (FAAS)
EN 15022-4 : 2011 ; Copper and copper alloys. Determination of tin content. Medium tin content. Flame atomic absorption spectrometric method (FAAS)
EN 15023-3 : 2010 ; Copper and copper alloys. Determination of nickel content. Flame atomic absorption spectrometric method (FAAS)
EN 15024-2 : 2006 ; Copper and copper alloys. Determination of zinc content. Flame atomic absorption spectrometry method (FAAS)
EN 15025 : 2010 ; Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometric method (FAAS).
EN 15026 : 2007 ; Hygrothermal performance of building components and building elements. Assessment of moisture transfer by numerical simulation.
EN 15027 : 2007+A1 : 2009 ; Transportable wall saw and wire saw equipment for job site. Safety.
EN 15028 : 2006 ; Chemicals used for treatment of water intended for human consumption. Sodium chlorate.
EN 15028 : 2012 ; Chemicals used for treatment of water intended for human consumption. Sodium chlorate.
EN 15029 : 2006 ; Products used for treatment of water intended for human consumption. Iron (III) hydroxide oxide.
EN 15029 : 2012 ; Products used for treatment of water intended for human consumption. Iron (III) hydroxide oxide.
EN 15030 : 2006 ; Chemicals used for treatment of water intended for human consumption. Silver salts for intermittent use.
EN 15030 : 2012+A1 : 2015 ; Chemicals used for treatment of water intended for human consumption. Silver salts for intermittent use.
EN 15031 : 2006 ; Chemicals used for treatment of swimming pool water. Aluminium based coagulants.
EN 15031 : 2013 ; Chemicals used for treatment of swimming pool water. Aluminium based coagulants.
EN 15032 : 2006+A1 : 2008 ; Chemicals used for treatment of swimming pool water. Trichloroisocyanuric acid.
EN 15033 : 2006 ; Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats.
EN 15034 : 2006 ; Heating boilers. Condensing heating boilers for fuel oil.
EN 15035 : 2006 ; Heating boilers. Special requirements for oil fired room sealed units up to 70 kW.
EN 15036-1 : 2006 ; Heating boilers. Test regulations for airborne noise emissions from heat generators. Airborne noise emissions from heat generators
EN 15036-2 : 2006 ; Heating boilers. Test regulations for airborne noise emissions from heat generators. Flue gas noise emissions at the outlet of the heat generator
EN 15037-1 : 2008 ; Precast concrete products. Beam-and-block floor systems. Beams
EN 15037-2 : 2009+A1 : 2011 ; Precast concrete products. Beam-and-block floor systems. Concrete blocks
EN 15037-3 : 2009+A1 : 2011 ; Precast concrete products. Beam-and-block floor systems. Clay blocks
EN 15037-5 : 2013 ; Precast concrete products. Beam-and-block floor systems. Lightweight blocks for simple formwork
EN 15038 : 2006 ; Translation services. Service requirements.
EN 15039 : 2006 ; Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polycarboxilic acids and salts.
EN 15039 : 2014 ; Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polycarboxilic acids and salts.
EN 15040 : 2006 ; Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Phosphonic acids and salts.
EN 15040 : 2014 ; Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Phosphonic acids and salts.
EN 15041 : 2006 ; Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polyphosphates.
EN 15041 : 2014 ; Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polyphosphates.
EN 15042-1 : 2006 ; Thickness measurement of coatings and characterization of surfaces with surface waves. Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
EN 15042-2 : 2006 ; Thickness measurement of coatings and characterization of surfaces with surface waves. Guide to the thickness measurement of coatings by photothermic method
EN 15048-1 : 2007 ; Non-preloaded structural bolting assemblies. General requirements
EN 15048-1 : 2016 ; Non-preloaded structural bolting assemblies. General requirements
EN 15048-2 : 2007 ; Non-preloaded structural bolting assemblies. Suitability test
EN 15048-2 : 2016 ; Non-preloaded structural bolting assemblies. Fitness for purpose
EN 15049 : 2007 ; Railway applications. Suspension components. Torsion bar, steel.
EN 15050 : 2007+A1 : 2012 ; Precast concrete products. Bridge elements .
EN 15051-1 : 2013 ; Workplace exposure. Measurement of the dustiness of bulk materials. Requirements and choice of test methods
EN 15051-2 : 2013+A1 : 2016 ; Workplace exposure. Measurement of the dustiness of bulk materials. Rotating drum method
EN 15051-3 : 2013 ; Workplace exposure. Measurement of the dustiness of bulk materials. Continuous drop method
EN 15051 : 2006 ; Workplace atmospheres. Measurement of the dustiness of bulk materials. Requirements and reference test methods.
EN 15054 : 2006 ; Non fatty foods. Determination of chlormequat and mepiquat. LC-MS method.
EN 15055 : 2006 ; Non fatty foods. Determination of chlormequat and mepiquat. LC-MS/MS method.
EN 15056 : 2006+A1 : 2009 ; Cranes. Requirements for container handling spreaders.
EN 15057 : 2006 ; Fibre cement profiled sheets. Impact resistance test method.
EN 15058 : 2006 ; Stationary source emissions. Determination of the mass concentration of carbon monoxide (CO). Reference method : non-dispersive infrared spectrometry.
EN 15059 : 2009+A1 : 2015 ; Snow grooming equipment. Safety requirements.
EN 15060 : 2006 ; Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use.
EN 15061 : 2007+A1 : 2008 ; Safety of machinery. Safety requirements for strip processing line machinery and equipment.
EN 15062 : 2006 ; Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions.
EN 15063-1 : 2006 ; Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF). Guidelines to the routine method
EN 15063-1 : 2014 ; Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF). Guidelines to the routine method
EN 15063-2 : 2006 ; Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF). Routine method
EN 15067 : 2007 ; Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements.
EN 15069 : 2008 ; Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel.
EN 15072 : 2006+A1 : 2008 ; Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, anhydrous.
EN 15072 : 2013 ; Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, anhydrous.
EN 15073 : 2006+A1 : 2008 ; Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, dihydrate.
EN 15073 : 2013 ; Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, dihydrate.
EN 15074 : 2006 ; Chemicals used for treatment of swimming pool water. Ozone.
EN 15074 : 2014 ; Chemicals used for treatment of swimming pool water. Ozone.
EN 15075 : 2006 ; Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate.
EN 15075 : 2013 ; Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate.
EN 15076 : 2006 ; Chemicals used for treatment of swimming pool water. Sodium hydroxide.
EN 15076 : 2013 ; Chemicals used for treatment of swimming pool water. Sodium hydroxide.
EN 15077 : 2006 ; Chemicals used for treatment of swimming pool water. Sodium hypochlorite.
EN 15077 : 2013 ; Chemicals used for treatment of swimming pool water. Sodium hypochlorite.
EN 15078 : 2006 ; Chemicals used for treatment of swimming pool water. Sulfuric acid.
EN 15078 : 2013 ; Chemicals used for treatment of swimming pool water. Sulfuric acid.
EN 15079 : 2007 ; Copper and copper alloys. Analysis by spark source optical emission spectrometry (S-OES).
EN 15079 : 2015 ; Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES).
EN 15080-8 : 2009 ; Extended application of results from fire resistance tests. Beams
EN 15080-12 : 2011 ; Extended application of results from fire resistance tests. Loadbearing masonry walls
EN 15081 : 2007 ; Industrial valves. Mounting kits for part-turn valve actuator attachment.
EN 15085-1 : 2007+A1 : 2013 ; Railway applications. Welding of railway vehicles and components. General
EN 15085-2 : 2007 ; Railway applications. Welding of railway vehicles and components. Quality requirements and certification of welding manufacturer
EN 15085-3 : 2007 ; Railway applications. Welding of railway vehicles and components. Design requirements
EN 15085-4 : 2007 ; Railway applications. Welding of railway vehicles and components. Production requirements
EN 15085-5 : 2007 ; Railway applications. Welding of railway vehicles and components. Inspection, testing and documentation
EN 15086 : 2006 ; Foodstuffs. Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs.
EN 15088 : 2005 ; Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery.
EN 15091 : 2006 ; Sanitary tapware. Electronic opening and closing sanitary tapware.
EN 15091 : 2013 ; Sanitary tapware. Electronic opening and closing sanitary tapware.
EN 15092 : 2008 ; Building valves. Inline hot water supply tempering valves. Tests and requirements.
EN 15093 : 2008 ; Safety of machinery. Safety requirements for hot flat rolling mills.
EN 15094 : 2008 ; Safety of machinery. Safety requirements for cold flat rolling mills.
EN 15095 : 2007+A1 : 2008 ; Power-operated mobile racking and shelving, carousels and storage lifts. Safety requirements.
EN 15096 : 2008 ; Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification.
EN 15097 : 2006 ; Irrigation techniques. Localised irrigation. Hydraulic evaluation.
EN 15099-1 : 2007 ; Irrigation techniques. Remote monitoring and control for irrigation systems. General considerations
EN 15101-1 : 2013 ; Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products. Specification for the products before installation
EN 15101-2 : 2013 ; Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products. Specification for the installed products
EN 15102 : 2007+A1 : 2011 ; Decorative wall coverings. Roll and panel form.
EN 15103 : 2009 ; Solid biofuels. Determination of bulk density.
EN 15104 : 2011 ; Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods.
EN 15105 : 2011 ; Solid biofuels. Determination of the water soluble chloride, sodium and potassium content.
EN 15109 : 2006 ; Surface active agents. Determination of the active matter content of alkylamidopropylbetaines.
EN 15110 : 2006 ; Water quality. Guidance standard for the sampling of zooplankton from standing waters.
EN 15111 : 2007 ; Foodstuffs. Determination of trace elements. Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry).
EN 15112 : 2006 ; External cathodic protection of well casing.
EN 15114 : 2006+A1 : 2008 ; Textile floor coverings. Classification of textile floor coverings without pile.
EN 15115 : 2006 ; Textile floor coverings. Determination of sensitivity to spilled water.
EN 15116 : 2008 ; Ventilation in buildings. Chilled beams. Testing and rating of active chilled beams.
EN 15132 : 2006 ; Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods.
EN 15136 : 2006 ; Materials and articles in contact with foodstuffs. Certain epoxy derivatives subject to limitation. Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants.
EN 15137 : 2006 ; Materials and articles in contact with foodstuffs. Certain epoxy derivatives subject to limitation. Determination of NOGE and its hydroxy and chlorinated derivatives.
EN 15140 : 2006 ; Public passenger transport. Basic requirements and recommendations for systems that measure delivered service quality.
EN 15144 : 2007 ; Winter maintenance equipment. Terminology. Terms for winter maintenance.
EN 15146 : 2006 ; Solid softwood panelling and cladding. Machined profiles without tongue and groove.
EN 15148 : 2009 ; Solid biofuels. Determination of the content of volatile matter.
EN 15149-1 : 2010 ; Solid biofuels. Determination of particle size distribution. Oscillating screen method using sieve apertures of 1 mm and above
EN 15149-2 : 2010 ; Solid biofuels. Determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below
EN 15150 : 2011 ; Solid biofuels. Determination of particle density.
EN 15151-1 : 2012 ; Mountaineering equipment. Braking devices. Braking devices with manually assisted locking, safety requirements and test methods
EN 15151-2 : 2012 ; Mountaineering equipment. Braking devices. Manual braking devices, safety requirements and test methods
EN 15152 : 2007 ; Railway applications. Front windscreens for train cabs.
EN 15153-1 : 2007 ; Railway applications. External visible and audible warning devices for high speed trains. Head, marker and tail lamps
EN 15153-1 : 2013+A1 : 2016 ; Railway applications. External visible and audible warning devices for trains. Head, marker and tail lamps
EN 15153-2 : 2007 ; Railway applications. External visible and audible warning devices for high speed trains. Warning horns
EN 15153-2 : 2013 ; Railway applications. External visible and audible warning devices for trains. Warning horns
EN 15154-1 : 2006 ; Emergency safety showers. Plumbed-in body showers for laboratories
EN 15154-2 : 2006 ; Emergency safety showers. Plumbed-in eye wash units
EN 15154-3 : 2009 ; Emergency safety showers. Non plumbed-in body showers
EN 15154-4 : 2009 ; Emergency safety showers. Non plumbed-in eyewash units
EN 15156 : 2006 ; Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude.
EN 15157 : 2006 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude.
EN 15158 : 2006 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of fatigue properties at constant amplitude.
EN 15159-1 : 2006 ; Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for apparatus, components, appliances and accessories
EN 15159-2 : 2006 ; Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Designation and specification of resistance to chemical attack and thermal shock
EN 15159-3 : 2006 ; Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Thermal shock resistance
EN 15161 : 2006 ; Water conditioning equipment inside buildings. Installation, operation, maintenance and repair.
EN 15162 : 2008 ; Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws.
EN 15163 : 2008 ; Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws.
EN 15164 : 2008 ; Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines.
EN 15165 : 2014 ; Food processing machinery. Forming machines. Safety and hygiene requirements.
EN 15166 : 2008 ; Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements.
EN 15167-1 : 2006 ; Ground granulated blast furnace slag for use in concrete, mortar and grout. Definitions, specifications and conformity criteria
EN 15167-2 : 2006 ; Ground granulated blast furnace slag for use in concrete, mortar and grout. Conformity evaluation
EN 15168 : 2006 ; Surface active agents. Determination of hydroxyl value. p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide.
EN 15169 : 2007 ; Characterization of waste. Determination of loss on ignition in waste, sludge and sediments.
EN 15170 : 2008 ; Characterization of sludges. Determination of calorific value.
EN 15178 : 2007 ; Elements for the identification of products in emergency enquiries.
EN 15179 : 2007 ; Railway applications. Braking. Requirements for the brake system of coaches.
EN 15180 : 2014 ; Food processing machinery. Food depositors. Safety and hygiene requirements.
EN 15181 : 2008 ; Measuring method of the energy consumption of gas fired ovens.
EN 15182-1 : 2007+A1 : 2009 ; Hand-held branchpipes for fire service use. Common requirements
EN 15182-2 : 2007+A1 : 2009 ; Hand-held branch pipes for fire service use. Combination branch pipes, PN 16
EN 15182-3 : 2007+A1 : 2009 ; Hand-held branch pipes for fire service use. Smooth bore jet and/or one fixed spray jet angle branch pipes PN 16
EN 15182-4 : 2007+A1 : 2009 ; Hand-held branch pipes for fire service use. High pressure branch pipes PN 16
EN 15183 : 2006 ; Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test.
EN 15184 : 2006 ; Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test).
EN 15185 : 2011 ; Furniture. Assessment of the surface resistance to abrasion.
EN 15186 : 2012 ; Furniture. Assessment of the surface resistance to scratching.
EN 15187 : 2006 ; Furniture. Assessment of the effect of light exposure.
EN 15188 : 2007 ; Determination of the spontaneous ignition behaviour of dust accumulations.
EN 15189 : 2006 ; Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods.
EN 15190 : 2007 ; Structural adhesives. Test methods for assessing long term durability of bonded metallic structures.
EN 15191 : 2009 ; Precast concrete products. Classification of glassfibre reinforced concrete performance.
EN 15192 : 2006 ; Characterisation of waste and soil. Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection.
EN 15193 : 2007 ; Energy performance of buildings. Energy requirements for lighting.
EN 15194 : 2009+A1 : 2011 ; Cycles. Electrically power assisted cycles. EPAC Bicycles.
EN 15195 : 2007 ; Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber.
EN 15195 : 2014 ; Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber.
EN 15196 : 2006 ; Water quality. Guidance on sampling and processing of the pupal exuviae of Chironomidae (Order Diptera) for ecological assessment.
EN 15197 : 2007 ; Wood-based panels. Flaxboards. Specifications.
EN 15198 : 2007 ; Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres.
EN 15199-1 : 2006 ; Petroleum products. Determination of boiling range distribution by gas chromatography method. Middle distillates and lubricating base oils
EN 15199-2 : 2006 ; Petroleum products. Determination of boiling range distribution by gas chromatography method. Heavy distillates and residual fuel
EN 15199-3 : 2008 ; Petroleum products. Determination of boiling range distribution by gas chromatography method. Crude oil
EN 15199-4 : 2015 ; Petroleum products. Determination of boiling range distribution by gas chromatography method. Light fractions of crude oil
EN 15200 : 2007 ; Sanitary appliances. Multifunction shower cabinets.
EN 15202 : 2006 ; LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections.
EN 15202 : 2012 ; LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections.
EN 15204 : 2006 ; Water quality. Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermoehl technique).
EN 15205 : 2006 ; Determination of hexavalent chromium in corrosion protection layers. Qualitative analysis.
EN 15206 : 2007 ; Vitreous and porcelain enamels. Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron.
EN 15207 : 2006 ; Tanks for transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage.
EN 15207 : 2014 ; Tanks for the transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage.
EN 15208 : 2007 ; Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications.
EN 15208 : 2014 ; Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications.
EN 15210-1 : 2009 ; Solid biofuels. Determination of mechanical durability of pellets and briquettes. Pellets
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com