EN 1760-1 : 1997+A1 : 2009 ; Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
EN 1760-2 : 2001+A1 : 2009 ; Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 1761 : 1999 ; Rubber hoses and hose assemblies for fuel truck delivery. Specification.
EN 1762 : 1998 ; Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification.
EN 1763-1 : 2001 ; Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase. Requirements for rubber and plastics tubing and hoses
EN 1765 : 1998 ; Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies.
EN 1765 : 2016 ; Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies.
EN 1766 : 2000 ; Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing.
EN 1767 : 1999 ; Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis.
EN 1770 : 1998 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion.
EN 1771 : 2004 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of injectability and splitting test.
EN 1772 : 1995 ; Surface active agents. Determination of wetting power by immersion.
EN 1773 : 1997 ; Textiles. Fabrics. Determination of width and length.
EN 1774 : 1997 ; Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid.
EN 1775 : 1998 ; Gas supply. Gas pipework in buildings. Maximum operating pressure $3L 5 bar. Functional recommendations.
EN 1775 : 2007 ; Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations.
EN 1776 : 1999 ; Gas supply. Natural gas measuring stations. Functional requirements.
EN 1776 : 2015 ; Gas infrastructure. Gas measuring systems. Functional requirements.
EN 1777 : 2010 ; Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing.
EN 1778 : 2000 ; Characteristic values for welded thermoplastics constructions. Determination of allowable stresses and moduli for design of thermoplastics equipment.
EN 1779 : 1999 ; Non-destructive testing. Leak testing. Criteria for method and technique selection.
EN 1780-1 : 1997 ; Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Numerical designation system
EN 1780-2 : 1997 ; Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Chemical symbol based designation system
EN 1780-3 : 1997 ; Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Writing rules for chemical composition
EN 1783 : 1997 ; Matches. Performance requirements, safety and classification.
EN 1784 : 1997 ; Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic analysis of hydrocarbons.
EN 1785 : 1997 ; Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones.
EN 1786 : 1997 ; Foodstuffs. Detection of irradiated food containing bone. Method by ESR spectroscopy.
EN 1788 : 1997 ; Foodstuffs. Detection of irradiated food from which silicate minerals can be isolated. Method by thermoluminescence.
EN 1789 : 2000 ; Medical vehicles and their equipment. Road ambulances.
EN 1789 : 2007+A2 : 2014 ; Medical vehicles and their equipment. Road ambulances.
EN 1790 : 1998 ; Road marking materials. Preformed road markings.
EN 1790 : 2013 ; Road marking materials. Preformed road markings.
EN 1791 : 1997 ; Surface active agents. Fatty alkyl dimethyl amine oxides. Determination of the amine oxide content.
EN 1792 : 1998 ; Welding. Multilingual list of terms for welding and related processes.
EN 1793-1 : 1998 ; Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of sound absorption
EN 1793-1 : 2012 ; Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of sound absorption
EN 1793-2 : 1998 ; Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of airborne sound insulation
EN 1793-2 : 2012 ; Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
EN 1793-3 : 1998 ; Road traffic noise reducing devices. Test method for determining the acoustic performance. Normalized traffic noise spectrum
EN 1793-4 : 2015 ; Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of sound diffraction
EN 1793-5 : 2016 ; Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions
EN 1793-6 : 2012 ; Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions
EN 1794-1 : 1998 ; Road traffic noise reducing devices. Non-acoustic performance. Mechanical performance and stability requirements
EN 1794-1 : 2011 ; Road traffic noise reducing devices. Non-acoustic performance. Mechanical performance and stability requirements
EN 1794-2 : 1998 ; Road traffic noise reducing devices. Non-acoustic performance. General safety and environmental requirements
EN 1794-2 : 2011 ; Road traffic noise reducing devices. Non-acoustic performance. General safety and environmental requirements
EN 1794-3 : 2016 ; Road traffic noise reducing devices. Non-acoustic performance. Reaction to fire. Burning behaviour of noise reducing devices and classification
EN 1795 : 1998 ; Transportable gas cylinders (excluding LPG). Procedures for change of gas service.
EN 1796 : 2006+A1 : 2008 ; Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP).
EN 1796 : 2013 ; Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP).
EN 1797-1 : 1998 ; Cryogenic vessels. Gas/material compatibility. Oxygen compatibility
EN 1799 : 1999 ; Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface.
EN 1800 : 2006 ; Transportable gas cylinders. Acetylene cylinders. Basic requirements, definitions and type testing.
EN 1801 : 1999 ; Transportable gas cylinders. Filling conditions for single acetylene cylinders.
EN 1804-3 : 2006+A1 : 2010 ; Machines for underground mines. Safety requirements for hydraulic powered roof supports. Hydraulic control systems
EN 1806 : 2000 ; Chimneys. Clay/ceramic flue blocks for single wall chimneys. Requirements and test methods.
EN 1806 : 2006 ; Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods.
EN 1807-1 : 2013 ; Safety of woodworking machines. Band sawing machines. Table band saws and band re-saws
EN 1807-2 : 2013 ; Safety of woodworking machines. Band sawing machines. Log sawing machines
EN 1807 : 1999+A1 : 2009 ; Safety of woodworking machines. Band sawing machines.
EN 1808 : 1999+A1 : 2010 ; Safety requirements on suspended access equipment. Design calculations, stability criteria, construction. Tests.
EN 1808 : 2015 ; Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests.
EN 1809 : 1998 ; Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.
EN 1809 : 2014+A1 : 2016 ; Diving equipment. Buoyancy compensators. Functional and safety requirements, test methods.
EN 1810 : 1998 ; Body-piercing post assemblies. Reference test method for determination of nickel content by flame atomic absorption spectrometry.
EN 1811 : 1998+A1 : 2008 ; Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin.
EN 1811 : 2011+A1 : 2015 ; Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin.
EN 1813 : 1998 ; Textile floor coverings. Determination of wool fibre integrity using an abrasion machine.
EN 1814 : 1998 ; Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test.
EN 1814 : 2005 ; Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test.
EN 1815 : 1998 ; Resilient and textile floor coverings. Assessment of static electrical propensity.
EN 1815 : 2016 ; Resilient and laminate floor coverings. Assessment of static electrical propensity.
EN 1816 : 1998 ; Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing.
EN 1816 : 2010 ; Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing.
EN 1817 : 1998 ; Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings.
EN 1817 : 2010 ; Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings.
EN 1818 : 1999 ; Resilient floor coverings. Determination of the effect of loaded heavy duty castors.
EN 1819 : 1998 ; Laryngoscopes for tracheal intubation. Particular requirements.
EN 1821-1 : 1997 ; Electrically propelled road vehicles. Measurement of road operating ability. Pure electric vehicles
EN 1821-2 : 1999 ; Electrically propelled road vehicles. Measurement of road operating ability. Thermal electric hybrid vehicles
EN 1822-1 : 1998 ; High efficiency air filters (HEPA and ULPA). Classification, performance testing, marking
EN 1822-1 : 2009 ; High efficiency air filters (EPA, HEPA and ULPA). Classification, performance testing, marking
EN 1822-2 : 1998 ; High efficiency air filters (HEPA and ULPA). Aerosol production, measuring equipment, particle counting statistics
EN 1822-2 : 2009 ; High efficiency air filters (EPA, HEPA and ULPA). Aerosol production, measuring equipment, particle counting statistics
EN 1822-3 : 1998 ; High efficiency air filters (HEPA and ULPA). Testing flat sheet filter media
EN 1822-3 : 2009 ; High efficiency air filters (EPA, HEPA and ULPA). Testing flat sheet filter media
EN 1822-4 : 2009 ; High efficiency air filters (EPA, HEPA and ULPA). Determining leakage of filter elements (scan method)
EN 1822-5 : 2009 ; High efficiency air filters (EPA, HEPA and ULPA). Determining the efficiency of filter elements
EN 1825-1 : 2004 ; Grease separators. Principles of design, performance and testing, marking and quality control
EN 1826 : 1997 ; Biotechnology. Large-scale process and production. Control procedures for raw materials.
EN 1827 : 1999+A1 : 2009 ; Respiratory protective devices. Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only. Requirements, testing, marking.
EN 1829-2 : 2008 ; High-pressure water jet machines. Safety requirements. Hoses, hose lines and connectors
EN 1833 : 1997 ; EDI. Message. Syntax and service report message (CONTRL).
EN 1834-1 : 2000 ; Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Group II engines for use in flammable gas and vapour atmospheres
EN 1834-2 : 2000 ; Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
EN 1834-3 : 2000 ; Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Group II engines for use in flammable dust atmospheres
EN 1835 : 2000 ; Respiratory protective devices. Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood. Requirements, testing, marking.
EN 1836 : 2005 ; Personal eye-equipment. Sunglasses and sunglare filters for general use and filters for direct observation of the sun.
EN 1837 : 1999+A1 : 2009 ; Safety of machinery. Integral lighting of machines.
EN 1839 : 2012 ; Determination of explosion limits of gases and vapours.
EN 1841 : 1999 ; Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive.
EN 1842 : 1997 ; Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage.
EN 1844 : 2013 ; Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing.
EN 1845 : 1999 ; Footwear manufacturing machines. Footwear moulding machines. Safety requirements.
EN 1845 : 2007 ; Footwear manufacturing machines. Footwear moulding machines. Safety requirements.
EN 1846-1 : 1998 ; Firefighting and rescue service vehicles. Nomenclature and designation
EN 1846-1 : 2011 ; Firefighting and rescue service vehicles. Nomenclature and designation
EN 1846-2 : 2009+A1 : 2013 ; Firefighting and rescue service vehicles. Common requirements. Safety and performance
EN 1846-3 : 2013 ; Firefighting and rescue service vehicles. Permanently installed equipment. Safety and performance
EN 1847 : 2001 ; Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals including water.
EN 1847 : 2009 ; Flexible sheets for waterproofing. Plastics and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals, including water.
EN 1848-1 : 2000 ; Flexible sheets for waterproofing. Determination of length, width and straightness. Bitumen sheets for roof waterproofing
EN 1849-1 : 2000 ; Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Bitumen sheets for roof waterproofing
EN 1849-2 : 2009 ; Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets
EN 1850-1 : 2000 ; Flexible sheets for waterproofing. Determination of visible defects. Bitumen sheets for roof waterproofing
EN 1852-1 : 1998 ; Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system
EN 1852-1 : 2009 ; Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system
EN 1853 : 1999+A1 : 2009 ; Agricultural machinery. Trailers with tipping body. Safety.
EN 1854 : 1997 ; Pressure sensing devices for gas burners and gas burning appliances.
EN 1854 : 2006 ; Pressure sensing devices for gas burners and gas burning appliances.
EN 1854 : 2010 ; Pressure sensing devices for gas burners and gas burning appliances.
EN 1856-1 : 2009 ; Chimneys. Requirements for metal chimneys. System chimney products
EN 1856-2 : 2004 ; Chimneys. Requirements for metal chimneys. Metal liners and connecting flue pipes
EN 1856-2 : 2009 ; Chimneys. Requirements for metal chimneys. Metal flue liners and connecting flue pipes
EN 1857 : 2010 ; Chimneys. Components. Concrete flue liners.
EN 1858 : 2008+A1 : 2011 ; Chimneys. Components. Concrete flue blocks.
EN 1859 : 2009+A1 : 2013 ; Chimneys. Metal chimneys. Test methods .
EN 1860-1 : 2013 ; Appliances, solid fuels and firelighters for barbecueing. Barbecues burning solid fuels. Requirements and test methods
EN 1860-2 : 2005 ; Appliances, solid fuels and firelighters for barbecueing. Barbecue charcoal and barbecue charcoal briquettes. Requirements and test methods
EN 1860-4 : 2004 ; Appliances, solid fuels and firelighters for barbecueing. Single use barbecues burning solid fuels. Requirements and test methods
EN 1861 : 1998 ; Refrigerating systems and heat pumps. System flow diagrams and piping and instrument diagrams. Layout and symbols.
EN 1862 : 1998 ; Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.
EN 1863-1 : 2000 ; Glass in buildings. Heat strengthened soda lime silicate glass. Definition and description
EN 1863-1 : 2011 ; Glass in building. Heat strengthened soda lime silicate glass. Definition and description
EN 1864 : 1997 ; Inland navigation vessels. Wheelhouse and control position. Types, safety requirements.
EN 1864 : 2008 ; Inland navigation vessels. Wheelhouse. Ergonomic and safety requirements.
EN 1865-1 : 2010+A1 : 2015 ; Patient handling equipment used in road ambulances. General stretcher systems and patient handling equipment
EN 1865-2 : 2010+A1 : 2015 ; Patient handling equipment used in road ambulances. Power assisted stretcher
EN 1865-3 : 2012+A1 : 2015 ; Patient handling equipment used in road ambulances. Heavy duty stretcher
EN 1865-4 : 2012 ; Patient handling equipment used in road ambulances. Foldable patient transfer chair
EN 1865-5 : 2012 ; Patient handling equipment used in road ambulances. Stretcher support
EN 1865 : 2000 ; Specifications for stretchers and other patient handling equipment used in road ambulances.
EN 1866-1 : 2007 ; Mobile fire extinguishers. Characteristics, performance and test methods
EN 1866-2 : 2014 ; Mobile fire extinguishers. Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
EN 1866-3 : 2013 ; Mobile fire extinguishers. Requirements for the assembly, construction and pressure resistance of CO$d2 extinguishers which comply with the requirements of EN 1866-1
EN 1867 : 1997 ; Machine readable cards. Health care applications. Numbering system and registration procedure for issuer identifiers.
EN 1868 : 1997 ; Personal protective equipment against falls from a height. List of equivalent terms.
EN 1870-1 : 1999 ; Safety of woodworking machines. Circular sawing machines. Circular saw benches (with and without sliding table) and dimension saws
EN 1870-1 : 2007+A1 : 2009 ; Safety of woodworking machines. Circular sawing machines. Circular saw benches (with and without sliding table), dimension saws and building site saws
EN 1870-2 : 1999 ; Safety of woodworking machines. Circular sawing machines. Horizontal beam panel saws and vertical panel saws
EN 1870-3 : 2014 ; Safety of woodworking machines. Circular sawing machines. Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
EN 1870-4 : 2001+A1 : 2009 ; Safety of woodworking machines. Circular sawing machines. Multiblade rip sawing machines with manual loading and/or unloading
EN 1870-4 : 2012 ; Safety of woodworking machines. Circular sawing machines. Multiblade rip sawing machines with manual loading and/or unloading
EN 1870-7 : 2012 ; Safety of woodworking machines. Circular sawing machines. Single blade log sawing machines with integrated feed table and manual loading and/or unloading
EN 1870-8 : 2012 ; Safety of woodworking machines. Circular sawing machines. Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 1870-9 : 2000+A1 : 2009 ; Safety of woodworking machines. Circular sawing machines. Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
EN 1870-9 : 2012 ; Safety of woodworking machines. Circular sawing machines. Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
EN 1870-10 : 2013 ; Safety of woodworking machines. Circular sawing machines. Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
EN 1870-11 : 2013 ; Safety of woodworking machines. Circular sawing machines. Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
EN 1870-12 : 2013 ; Safety of woodworking machines. Circular sawing machines. Pendulum cross-cut sawing machines
EN 1870-13 : 2007+A2 : 2012 ; Safety of woodworking machines. Circular sawing machines. Horizontal beam panel sawing machines
EN 1870-14 : 2007+A2 : 2012 ; Safety of woodworking machines. Circular sawing machines. Vertical panel sawing machines
EN 1870-15 : 2004+A1 : 2009 ; Safety of woodworking machines. Circular sawing machines. Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
EN 1870-15 : 2012 ; Safety of woodworking machines. Circular sawing machines. Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
EN 1870-16 : 2005+A1 : 2009 ; Safety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V-cutting
EN 1870-16 : 2012 ; Safety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V cutting
EN 1870-17 : 2007+A2 : 2009 ; Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)
EN 1870-17 : 2012+A1 : 2015 ; Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
EN 1870-18 : 2013 ; Safety of woodworking machines. Circular sawing machines. Dimension saws
EN 1870-19 : 2013 ; Safety of woodworking machines. Circular sawing machines. Circular saw benches (with and without sliding table) and building site saws
EN 1871 : 2000 ; Road marking materials. Physical properties.
EN 1873 : 2005 ; Prefabricated accessories for roofing. Individual roof lights of plastics. Product specification and test methods.
EN 1873 : 2014+A1 : 2016 ; Prefabricated accessories for roofing. Individual rooflights of plastics. Product specification and test methods.
EN 1875-3 : 1998 ; Rubber and plastics-coated fabrics. Determination of tear strength. Trapezoidal method
EN 1876-1 : 1998 ; Rubber- or plastics-coated fabrics. Low temperature tests. Bending test
EN 1876-2 : 1998 ; Rubber- or plastics-coated fabrics. Low temperature tests. Impact test on loop
EN 1877-1 : 2000 ; Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins. Determination of epoxy equivalent
EN 1877-2 : 2000 ; Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins. Determination of amine functions using the total basicity number
EN 1881 : 2006 ; Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method.
EN 1882 : 1999 ; Feather and down. Test methods. Determination of the commercial mass of a lot of feather and down.
EN 1883 : 1999 ; Feather and down. Sampling in view of tests.
EN 1884 : 1999 ; Feather and down. Test methods. Determination of microbiological state.
EN 1886 : 1998 ; Ventilation for buildings. Air handling units. Mechanical performance.
EN 1886 : 2007 ; Ventilation for buildings. Air handling units. Mechanical performance.
EN 1888 : 2012 ; Child care articles. Wheeled child conveyances. Safety requirements and test methods.
EN 1889-1 : 2011 ; Machines for underground mines. Mobile machines working underground. Safety. Rubber tyred vehicles
EN 1890 : 1999 ; Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide.
EN 1890 : 2006 ; Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide.
EN 1891 : 1998 ; Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes.
EN 1892 : 2005 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties.
EN 1893 : 2005 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties.
EN 1894 : 2005 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens.
EN 1896 : 2001 ; Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation.
EN 1898 : 2001 ; Specifications for flexible intermediate bulk containers (FIBCs) for non-dangerous goods.
EN 1899-1 : 1998 ; Water quality. Determination of biochemical oxygen demand after n days (BODn). Dilution and seeding method with allylthiourea addition
EN 1899-2 : 1998 ; Water quality. Determination of biochemical oxygen demand after n days (BODn). Method for undiluted samples
EN 1900 : 1998 ; Materials and articles in contact with foodstuffs. Non-metallic tableware. Terminology.
EN 1902 : 1999 ; Adhesives. Test methods for adhesives for floor coverings and wall coverings. Shear test.
EN 1902 : 2015 ; Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test.
ments for cableway installations designed to carry persons. Terminology.
EN 1910 : 2000 ; Wood and parquet flooring and wood panelling and cladding. Determination of dimensional stability.
EN 1910 : 2013 ; Wood flooring and wood panelling and cladding. Determination of dimensional stability.
EN 1910 : 2016 ; Wood flooring and wood panelling and cladding. Determination of dimensional stability.
EN 1911-1 : 1998 ; Stationary source emissions. Manual method of determination of HCI. Sampling of gases
EN 1911-2 : 1998 ; Stationary source emissions. Manual method of determination of HCI. Gaseous compounds absorption
EN 1911-3 : 1998 ; Stationary source emissions. Manual method of determination of HCI. Absorption solutions analysis and calculation
EN 1911 : 2010 ; Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method.
EN 1912 : 1998 ; Structural timber. Strength classes. Assignment of visual grades and species.
EN 1912 : 2004+A4 : 2010 ; Structural timber. Strength classes. Assignment of visual grades and species.
EN 1912 : 2012 ; Structural Timber. Strength classes. Assignment of visual grades and species.
EN 1914 : 2009 ; Inland navigation vessels. Work boats, ship’s boats and lifeboats.
EN 1914 : 2016 ; Inland navigation vessels. Work boats, ship’s boats and lifeboats.
EN 1915-1 : 2001+A1 : 2009 ; Aircraft ground support equipment. General requirements. Basic safety requirements
EN 1915-1 : 2013 ; Aircraft ground support equipment. General requirements. Basic safety requirements
EN 1915-2 : 2001+A1 : 2009 ; Aircraft ground support equipment. General requirements. Stability and strength requirements, calculations and test methods
EN 1915-4 : 2004+A1 : 2009 ; Aircraft ground support equipment. General requirements. Noise measurement methods and reduction
EN 1918-1 : 1998 ; Gas supply systems. Underground gas storage. Functional recommendations for storage in aquifers
EN 1918-1 : 2016 ; Gas infrastructure. Underground gas storage. Functional recommendations for storage in aquifers
EN 1918-2 : 1998 ; Gas supply systems. Underground gas storage. Functional recommendations for storage in oil and gas fields
EN 1918-2 : 2016 ; Gas infrastructure. Underground gas storage. Functional recommendations for storage in oil and gas fields
EN 1918-3 : 1998 ; Gas supply systems. Underground gas storage. Functional recommendations for storage in solution-mined salt cavities
EN 1918-3 : 2016 ; Gas infrastructure. Underground gas storage. Functional recommendations for storage in solution-mined salt caverns
EN 1918-4 : 1998 ; Gas supply systems. Underground gas storage. Functional recommendations for storage in rock caverns
EN 1918-4 : 2016 ; Gas infrastructure. Underground gas storage. Functional recommendations for storage in rock caverns
EN 1918-5 : 1998 ; Gas supply systems. Underground gas storage. Functional recommendations for surface facilities
EN 1918-5 : 2016 ; Gas infrastructure. Underground gas storage. Functional recommendations for surface facilities
EN 1919 : 2000 ; Transportable gas cylinders. Cylinders for liquefied gases (excluding acetylene and LPG). Inspection at time of filling.
EN 1920 : 2000 ; Transportable gas cylinders. Cylinders for compressed gases (excluding acetylene). Inspection at time of filling.
EN 1922 : 1998 ; Information technology. Character repertoire and coding for interworking with Telex services.
EN 1923 : 1998 ; European character repertoires and their coding. 8-bit single-byte coding.
EN 1925 : 1999 ; Natural stone test methods. Determination of water absorption coefficient by capillarity.
EN 1926 : 1999 ; Natural stone test methods. Determination of compressive strength.
EN 1926 : 2006 ; Natural stone test methods. Determination of uniaxial compressive strength.
EN 1927-1 : 2008 ; Qualitative classification of softwood round timber. Spruces and firs
EN 1927-2 : 2008 ; Qualitative classification of softwood round timber. Pines
EN 1927-3 : 2008 ; Qualitative classification of softwood round timber. Larches and Douglas fir
EN 1928 : 2000 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness.
EN 1929-1 : 1998 ; Basket trolleys. Requirements and tests for basket trolleys with or without a child carrying facility
EN 1929-3 : 2005 ; Basket trolleys. Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility
EN 1929-4 : 2005 ; Basket trolleys. Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors
EN 1929-7 : 2005 ; Basket trolleys. Requirements and tests for basket trolleys with baby and child carrying facilities
EN 1930 : 2011 ; Child use and care articles. Safety barriers. Safety requirements and test methods.
EN 1931 : 2000 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties.
EN 1932 : 2001 ; External blinds and shutters. Resistance to wind loads. Method of testing.
EN 1932 : 2013 ; External blinds and shutters. Resistance to wind loads. Method of testing and performance criteria.
EN 1933 : 1999 ; Exterior blinds. Resistance to load due to water accumulation. Test method.
EN 1934 : 1998 ; Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry.
EN 1936 : 1999 ; Natural stone test methods. Determination of real density and apparent density and of total and open porosity.
EN 1936 : 2006 ; Natural stone test methods. Determination of real density and apparent density, and of total and open porosity.
EN 1937 : 1999 ; Test method for hydraulic setting floor smoothing and/or levelling compounds. Standard mixing procedures.
EN 1938 : 1999 ; Personal eye protection. Goggles for motorcycle and moped users.
EN 1938 : 2010 ; Personal eye protection. Goggles for motorcycle and moped users.
EN 1939 : 1997 ; Self adhesive tapes. Measurement of peel adhesion from stainless steel or from its own backing.
EN 1940 : 1996 ; Self adhesive tapes. Measurement of breaking strength.
EN 1941 : 1996 ; Self adhesive tapes. Measurement of elongation at break.
EN 1942 : 1996 ; Self adhesive tapes. Measurement of thickness.
EN 1942 : 2008 ; Self adhesive tapes. Measurement of thickness.
EN 1943 : 1996 ; Self adhesive tapes. Measurement of static shear adhesion.
EN 1944 : 1996 ; Self adhesive tapes. Measurement of unwind adhesion at low speed.
EN 1945 : 1996 ; Self adhesive tapes. Measurement of quick stick.
EN 1946-1 : 1999 ; Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Common criteria
EN 1946-2 : 1999 ; Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by guarded hot plate method
EN 1946-3 : 1999 ; Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by heat flow meter method
EN 1946-5 : 2000 ; Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by pipe test methods
EN 1947 : 2014 ; Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles.
EN 1948-1 : 1997 ; Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Sampling
EN 1948-1 : 2006 ; Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling of PCDDs/PCDFs
EN 1948-2 : 1997 ; Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Extraction and clean-up
EN 1948-2 : 2006 ; Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Extraction and clean-up of PCDDs/PCDFs
EN 1948-3 : 1997 ; Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Identification and quantification
EN 1948-3 : 2006 ; Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Identification and quantification of PCDDs/PCDFs
EN 1948-4 : 2010+A1 : 2013 ; Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
EN 1949 : 2011+A1 : 2013 ; Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles.
EN 1953 : 1998+A1 : 2009 ; Atomizing and spraying equipment for coating materials. Safety requirements.
EN 1953 : 2013 ; Atomising and spraying equipment for coating materials. Safety requirements.
EN 1957 : 2000 ; Domestic furniture. Beds and mattresses. Test methods for the determination of functional characteristics.
EN 1957 : 2012 ; Furniture. Beds and mattresses. Test methods for the determination of functional characteristics and assessment criteria.
EN 1963 : 1998 ; Textile floor coverings. Tests using the Lisson Tretrad machine.
EN 1963 : 2007 ; Textile floor coverings. Tests using the Lisson Tretrad machine.
EN 1964-1 : 2000 ; Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. Cylinders made of seamless steel with an $iR$dm value of less than 1100 MPa
EN 1964-3 : 2000 ; Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. Cylinders made of seamless stainless steel with an $iR$dm value of less than 1 100 MPa
EN 1965-1 : 2011 ; Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate
EN 1965-2 : 2011 ; Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate
EN 1966 : 2009 ; Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method.
EN 1969 : 2000 ; Surfaces for sports areas. Determination of thickness of synthetic sports surfaces.
EN 1970 : 2000 ; Adjustable beds for disabled persons. Requirements and test methods.
EN 1971-1 : 2011 ; Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an encircling test coil on the outer surface
EN 1971-2 : 2011 ; Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an internal probe on the inner surface
EN 1971 : 1999 ; Copper and copper alloys. Eddy current test for tubes.
EN 1972 : 1997 ; Diving accessories. Snorkels. Safety requirements and test methods.
EN 1972 : 2015 ; Diving equipment. Snorkels. Requirements and test methods.
EN 1974 : 1998+A1 : 2009 ; Food processing machinery. Slicing machines. Safety and hygiene requirements.
EN 1975 : 2000 ; Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre.
EN 1976 : 1998 ; Copper and copper alloys. Cast unwrought copper products.
EN 1976 : 2012 ; Copper and copper alloys. Cast unwrought copper products.
EN 1977 : 1998 ; Copper and copper alloys. Copper drawing stock (wire rod).
EN 1977 : 2013 ; Copper and copper alloys. Copper drawing stock (wire rod).
EN 1979 : 1999 ; Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam.
EN 1982 : 1999 ; Copper and copper alloys. Ingots and castings.
EN 1982 : 2008 ; Copper and copper alloys. Ingots and castings.
EN 1985 : 1999 ; Walking aids. General requirements and test methods.
EN 1986-1 : 1997 ; Electrically propelled road vehicles. Measurement of energy performances. Pure electric vehicles
EN 1987-1 : 1997 ; Electrically propelled road vehicles. Specific requirements for safety. On board energy storage
EN 1987-2 : 1997 ; Electrically propelled road vehicles. Specific requirements for safety. Functional safety means and protection against failures
EN 1987-3 : 1998 ; Electrically propelled road vehicles. Specific requirements for safety. Protection of users against electrical hazards
EN 1988-1 : 1998 ; Foodstuffs. Determination of sulfite. Optimized Monier-Williams method
EN 1988-2 : 1998 ; Foodstuffs. Determination of sulfite. Enzymatic method
EN 1989 : 2000 ; Thermoplastics piping systems. Joints for buried non-pressure sewerage applications. Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure.
EN 1991-3 : 2006 ; Eurocode 1 ; Actions on structures . Actions induced by cranes and machinery
EN 1991-4 : 2006 ; Eurocode 1 ; Actions on structures. Silos and tanks
EN 1991-1-4 : 2005+A1 : 2010 ; Eurocode 1 ; Actions on structures. General actions
EN 1991-1-6 : 2005 ; Eurocode 1 ; Actions on structures . General actions. Actions during execution
EN 1991-1-7 : 2006+A1 : 2014 ; Eurocode 1 ; Actions on structures. General actions
EN 1992-2 : 2005 ; Eurocode 2 ; Design of concrete structures. Concrete bridges. Design and detailing rules
EN 1992-3 : 2006 ; Eurocode 2 ; Design of concrete structures. Liquid retaining and containing structures
EN 1992-1-1 : 2004+A1 : 2014 ; Eurocode 2 : Design of concrete structures. General rules and rules for buildings
EN 1992-1-2 : 2004 ; Eurocode 2 ; Design of concrete structures. General rules
EN 1993-2 : 2006 ; Eurocode 3 ; Design of steel structures. Steel bridges
EN 1993-5 : 2007 ; Eurocode 3 ; Design of steel structures. Piling
EN 1993-6 : 2007 ; Eurocode 3 ; Design of steel structures. Crane supporting structures
EN 1993-1-1 : 2005+A1 : 2014 ; Eurocode 3 ; Design of steel structures. General rules and rules for buildings
EN 1993-1-2 : 2005 ; Eurocode 3 ; Design of steel structures. General rules
EN 1993-1-3 : 2006 ; Eurocode 3 ; Design of steel structures. General rules
EN 1993-1-4 : 2006+A1 : 2015 ; Eurocode 3 ; Design of steel structures. General rules. Supplementary rules for stainless steels
EN 1993-1-5 : 2006 ; Eurocode 3 ; Design of steel structures. Plated structural elements
EN 1993-1-6 : 2007 ; Eurocode 3 ; Design of steel structures. Strength and Stability of Shell Structures
EN 1993-1-7 : 2007 ; Eurocode 3 ; Design of steel structures. Plated structures subject to out of plane loading
EN 1993-1-8 : 2005 ; Eurocode 3 ; Design of steel structures. Design of joints
EN 1993-1-9 : 2005 ; Eurocode 3 ; Design of steel structures. Fatigue
EN 1993-1-10 : 2005 ; Eurocode 3 ; Design of steel structures. Material toughness and through-thickness properties
EN 1993-1-11 : 2006 ; Eurocode 3 ; Design of steel structures. Design of structures with tension components
EN 1993-1-12 : 2007 ; Eurocode 3 ; Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-3-1 : 2006 ; Eurocode 3 ; Design of steel structures. Towers, masts and chimneys
EN 1993-3-2 : 2006 ; Eurocode 3 ; Design of steel structures. Towers, masts and chimneys
EN 1993-4-1 : 2007 ; Eurocode 3 ; Design of steel structures. Silos
EN 1993-4-2 : 2007 ; Eurocode 3 ; Design of steel structures. Tanks
EN 1993-4-3 : 2007 ; Eurocode 3 ; Design of steel structures. Pipelines
EN 1994-2 : 2005 ; Eurocode 4 ; Design of composite steel and concrete structures. General rules and rules for bridges
EN 1994-1-1 : 2004 ; Eurocode 4 ; Design of composite steel and concrete structures. General rules and rules for buildings
EN 1994-1-2 : 2005+A1 : 2014 ; Eurocode 4 ; Design of composite steel and concrete structures. General rules. Structural fire design
EN 1996-2 : 2006 ; Eurocode 6 ; Design of masonry structures. Design considerations, selection of materials and execution of masonry
EN 1996-3 : 2006 ; Eurocode 6 ; Design of masonry structures. Simplified calculation methods for unreinforced masonry structures
EN 1996-1-1 : 2005+A1 : 2012 ; Eurocode 6 ; Design of masonry structures. General rules for reinforced and unreinforced masonry structures
EN 1996-1-2 : 2005 ; Eurocode 6 ; Design of masonry structures. General rules. Structural fire design
EN 1997-1 : 2004+A1 : 2013 ; Eurocode 7 ; Geotechnical design. General rules
EN 1997-2 : 2007 ; Eurocode 7 ; Geotechnical design. Ground investigation and testing
EN 1998-1 : 2004+A1 : 2013 ; Eurocode 8 : Design of structures for earthquake resistance . General rules, seismic actions and rules for buildings
EN 1998-2 : 2005+A2 : 2011 ; Eurocode 8 ; Design of structures for earthquake resistance. Bridges
EN 1998-3 : 2005 ; Eurocode 8 ; Design of structures for earthquake resistance. Assessment and retrofitting of buildings
EN 1998-4 : 2006 ; Eurocode 8 ; Design of structures for earthquake resistance. Silos, tanks and pipelines
EN 1998-5 : 2004 ; Eurocode 8 ; Design of structures for earthquake resistance. Foundations, retaining structures and geotechnical aspects
EN 1998-6 : 2005 ; Eurocode 8 ; Design of structures for earthquake resistance. Towers, masts and chimneys
EN 1999-1-1 : 2007+A2 : 2013 ; Eurocode 9 : Design of aluminium structures. General structural rules
EN 1999-1-2 : 2007 ; Eurocode 9 ; Design of aluminium structures. Structural fire design
EN 1999-1-3 : 2007+A1 : 2011 ; Eurocode 9 ; Design of aluminium structures. Structures susceptible to fatigue
EN 1999-1-4 : 2007+A1 : 2011 ; Eurocode 9 ; Design of aluminium structures. Cold-formed structural sheeting
EN 1999-1-5 : 2007 ; Eurocode 9 ; Design of aluminium structures. Shell structures
EN 2000 : 1992 ; Quality assurance. EN aerospace products. Approval of the quality system of manufacturers.
EN 2002-1 : 2005 ; Aerospace series. Metallic materials. Test methods. Tensile testing at ambient temperature
EN 2002-2 : 2005 ; Aerospace series. Metallic materials. Test methods. Tensile testing at elevated temperature
EN 2002-005 : 2007 ; Aerospace series. Test methods for metallic materials. Uninterrupted creep and stress-rupture testing
EN 2003-009 : 2007 ; Aerospace series. Test methods. Titanium and titanium alloys. Determination of surface contamination
EN 2003-010 : 2007 ; Aerospace series. Titanium and titanium alloys. Test methods. Sampling for determination of hydrogen content
EN 2004-1 : 1993 ; Test methods for aluminium and aluminium alloy products. Determination of electrical conductivity of wrought aluminium alloys
EN 2004-5 : 1993 ; Test methods for aluminium and aluminium alloy products. Determination of cladding thickness and copper diffusion of clad semi-finished products
EN 2009 : 1992 ; Bearings. Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9 ; Dimensions and loads.
EN 2011 : 1989 ; Specification for bearings. Airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9;Dimensions and loads.
EN 2012 : 1989 ; Specification for bearings – airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2 ; Dimensions and loads.
EN 2014 : 1989 ; Specification for bearings. Airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2;Dimensions and loads.
EN 2015 : 1989 ; Specification for bearings – airframe rolling double row, self aligning ball bearings in steel diameter series 2 ; Dimensions and loads.
EN 2017 : 1989 ; Specification for bearings – airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series 2 ; Dimensions and loads.
EN 2018 : 1989 ; Specification for bearings – airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4 ; Dimensions and loads.
EN 2020 : 1989 ; Specification for bearings – airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4 ; Dimensions and loads.
EN 2022 : 1990 ; Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Dimensions and loads.
EN 2023 : 1989 ; Specification for bearings – spherical plain in corrosion resisting steel with self-lubricating liner. Normal series. Dimensions and loads.
EN 2030 : 2013 ; Aerospace series. Steel X105CrMo17 (1;3544). Hardened and tempered. Bars. De $3L 150 mm.
EN 2032-001 : 2014 ; Aerospace series. Metallic materials. Conventional designation
EN 2032-2 : 1994 ; Metallic materials. Coding of metallurgical condition in delivery condition
EN 2043 : 2013 ; Aerospace series. Metallic materials. General requirements for semi-finished product qualification (excluding forgings and castings).
EN 2063 : 1992 ; Airframe rolling bearings. Technical specification.
EN 2064 : 1992 ; Bearings, spherical plain in corrosion resisting steel with self lubricating liner. Technical specification.
EN 2067 : 1996 ; Rod ends with self-aligning ball bearings. Technical specification.
EN 2068 : 1996 ; Rod ends with self-lubricating self-aligning bearings. Technical specification.
EN 2070-4 : 1991 ; Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube for structures
EN 2070-5 : 1991 ; Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube used under pressure
EN 2070-6 : 1991 ; Specification for aluminium and aluminium alloy wrought products. Technical specification. Rivet wire
EN 2070-7 : 1991 ; Specification for aluminium and aluminium alloy wrought products. Technical specification. Wrought forging stock
EN 2072 : 1994 ; Aluminium alloy AL-P1050A-H14 ; Sheet and strip 0,4 mm $3L a $3L 6 mm.
EN 2072 : 2005 ; Aerospace series. Aluminium AL-P1050A. H14 ; Sheet and strip. 0,4 mm $3L a $3L 6 mm.
EN 2076-1 : 1991 ; Aluminium and magnesium alloy ingots and castings. Technical specification. General requirements
EN 2076-2 : 1991 ; Aluminium and magnesium alloy ingots and castings. Technical specification. Ingots for remelting
EN 2076-3 : 1991 ; Aluminium and magnesium alloy ingots and castings. Technical specification. Pre-production and production castings
EN 2078 : 1993 ; Metallic materials. Manufacturing schedule. Inspection schedule. Inspection and test report. Description and rules for use.
EN 2079 : 1995 ; Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads.
EN 2082-1 : 1991 ; Specification for aluminium alloy forging stock and forgings. Technical specification. General requirements
EN 2082-2 : 1991 ; Specification for aluminium alloy forging stock and forgings. Technical specification. Forging stock
EN 2082-3 : 1991 ; Specification for aluminium alloy forging stock and forgings. Technical specification. Pre-production and production forgings
EN 2084 : 2005 ; Aerospace series. Cables, electric, single-core, general purpose, with conductors in copper or copper alloy. Technical specification.
EN 2084 : 2015 ; Aerospace series. Cables, electrical, general purpose, with conductors in copper or copper alloy. Technical specification.
EN 2085 : 2004 ; Aerospace series. Aluminium alloy AL-P2618A-T6 ; Hand and die forgings. a $3L 150 mm.
EN 2086 : 2004 ; Aerospace series. Aluminium alloy AL-P2618A-T851 ; Hand and die forgings. a $3L 150 mm.
EN 2087 : 2005 ; Aerospace series. Aluminium alloy AL-P2014A. T6 or T62 ; Clad sheet and strip 0,4 mm $3L a $3L 6 mm.
EN 2088 : 2005 ; Aerospace series. Aluminium alloy AL-P2014A. T4 or T42 ; Clad sheet and strip. 0,4 mm $3L a $3L 6 mm.
EN 2089 : 1994 ; Aluminium alloy AL-P2014A-T6 or T62 ; Sheet and strip 0,4 mm $3L a $3L 6 mm.
EN 2089 : 2005 ; Aluminium alloy AL-P2014A T6 or T62 ; Sheet and strip. 0,4 mm $3L a $3L 6 mm.
EN 2090 : 2005 ; Aerospace series. Aluminium alloy AL-P2024-T3 ; Clad sheet and strip 0,3 mm $3L a $3L 6 mm.
EN 2092 : 1994 ; Aluminium alloy AL-P7075-T6 or T62 ; Clad sheet and strip 0,4 mm $3L a $3L 6 mm.
EN 2092 : 2005 ; Aerospace series. Aluminium alloy AL-P7075-T6 or T62 ; Clad sheet and strip. 0,4 mm $3La $3L6 mm.
EN 2093 : 1992 ; Aluminium alloy AL-P7009-T74 ; Hand forgings 20 mm $3L a $3L 150 mm.
EN 2094 : 1992 ; Aluminium alloy AL-P7009-T74 ; Die forgings 3 mm $3L a $3L 150 mm.
EN 2100 : 1992 ; Aluminium alloy AL-P2014A-T4511 ; Extruded bars and sections a or D $3L 200 mm.
EN 2101 : 1991 ; Specification for chromic acid anodizing of aluminium and wrought aluminium alloys.
EN 2103-1 : 1992 ; Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification.. General requirements
EN 2103-2 : 1991 ; Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Remelting stock
EN 2103-3 : 1992 ; Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Pre-production and production castings
EN 2104 : 1996 ; Acrylonitrile-butadiene rubber (NBR). Hardness 40 IRHD.
EN 2115 : 2009 ; Aerospace series. Aluminium alloy 2117-T42 ; Wire for solid rivets. D $3L 10 mm.
EN 2116 : 2009 ; Aerospace series. Aluminium alloy 2017A-T42 ; Wire for solid rivets. D $3L 10 mm.
EN 2117 : 2009 ; Aerospace series. Aluminium alloy AL-P5056A (5056A)-H32 ; Wire for solid rivets. D $3L 10 mm.
EN 2122 : 1990 ; Specification for washers, flat aluminium alloy.
EN 2122 : 1994 ; Washers, flat, in aluminium alloy, anodized or chromated.
EN 2122 : 1996 ; Washers, flat, in aluminium alloy, anodized or chromated.
EN 2126 : 1992 ; Aluminium alloy AL-P7075-T651 ; Plate 6 mm $0L a $3L 80 mm.
EN 2127 : 1992 ; Aluminium alloy AL-P7075-T73511 ; Extruded bars and sections a or D $3L 100 mm.
EN 2128 : 1992 ; Aluminium alloy AL-P7075-T7351 ; Drawn bars 6 mm $3L a or D $3L 75 mm.
EN 2133 : 1998 ; Cadmium plating of steels with specified tensile strength $3L 1450 MPa, copper, copper alloys and nickel alloys.
EN 2133 : 2010 ; Aerospace series. Cadmium plating of steels with specified tensile strength $3L 1450 MPa, copper, copper alloys and nickel alloys.
EN 2139 : 1990 ; Specification for washers, flat heat resisting steel.
EN 2143 : 1993 ; Rivets, solid, universal head, in aluminium 1050A, inch based series.
EN 2144 : 1993 ; Rivets, solid, universal head, in aluminium alloy 2117, inch based series.
EN 2145 : 1993 ; Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series.
EN 2146 : 1993 ; Rivets, solid, universal head, in aluminium alloy 2017A, inch based series.
EN 2148 : 1993 ; Rivets, solid, universal head, in aluminium alloy 5056A, inch based series.
EN 2149 : 1993 ; Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series.
EN 2149 : 1996 ; Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series.
EN 2155-2 : 1993 ; Specification for test methods for transparent materials for aircraft glazing. Determination of water absorption
EN 2155-3 : 1993 ; Specification for test methods for transparent materials for aircraft glazing. Determination of refractive index
EN 2155-5 : 1989 ; Specification for test methods for transparent materials for aircraft glazing. Determination of visible light transmission
EN 2155-7 : 1997 ; Specification for test methods for transparent materials for aircraft glazing. Determination of optical deviation
EN 2155-8 : 1989 ; Specification for test methods for transparent materials for aircraft glazing. Determination of optical distortion
EN 2155-9 : 1989 ; Specification for test methods for transparent materials for aircraft glazing. Determination of haze
EN 2155-12 : 1997 ; Specification for test methods for transparent materials for aircraft glazing. Determination of linear thermal expansion
EN 2155-13 : 1993 ; Test methods for transparent materials for aircraft glazing. Determination of temperature at deflection under load
EN 2155-14 : 1993 ; Test methods for transparent materials for aircraft glazing. Determination of the 1/10 Vicat softening temperature
EN 2155-19 : 1997 ; Specification for test methods for transparent materials for aircraft glazing. Determination of craze resistance
EN 2155-21 : 1989 ; Specification for test methods for transparent materials for aircraft glazing. Determination of resistance to crack propagation (K factor)
EN 2157-1 : 1993 ; Steel. Forging stock and forgings. Technical specifications. General requirements
EN 2157-2 : 1993 ; Steel. Forging stock and forgings. Technical specifications. Forging stock
EN 2157-3 : 1993 ; Steel. Forging stock and forgings. Technical specifications. Pre-production and production forgings
EN 2205 : 2009 ; Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa $3L Rm $3L 1100 MPa. Bars. De $3L 40 mm.
EN 2206 : 2008 ; Aerospace series. Steel FE-PL1502 (25CrMo4). 650 MPa $3L Rm $3L 850 MPa. Bars. De $3L 150 mm.
EN 2209 : 2008 ; Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa $3L Rm $3L 1100 MPa. Sheets, strips and plates. 0,5 mm $3L a $3L 20 mm.
EN 2213 : 2012 ; Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bars. De $3L 16 mm. 980 MPa $3L Rm $3L 1 180 MPa.
EN 2226 : 2014 ; Aerospace series. Steel X105CrMo17 (1;4125). Hardened and tempered. Hand and die forgings. De $3L 150 mm.
EN 2234 : 2012 ; Aerospace series. Cable, electrical, fire resistant. Technical specification.
EN 2235 : 2006 ; Aerospace series. Single and multicore electrical cables, screened and jacketed.
EN 2235 : 2015 ; Aerospace series. Single and multicore electrical cables, screened and jacketed. Technical specification.
EN 2236 : 1992 ; Pins, headed, close tolerance shank, in alloy steel. Technical specification.
EN 2240-001 : 2009 ; Aerospace series. Lamps, incandescent. Technical specification
EN 2240-002 : 2009 ; Aerospace series. Lamps, incandescent. Main characteristics
EN 2240-003 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 44 ; Product standard
EN 2240-004 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 47 ; Product standard
EN 2240-005 : 2009 ; Aerospace series. Lamps, incandescent. Lamp, code 73 ; Product standard
EN 2240-006 : 2009 ; Aerospace series. Lamps, incandescent. Lamp, code 73E. Product standard
EN 2240-007 : 2009 ; Aerospace series. Lamps, incandescent. Lamp, code 74 ; Product standard
EN 2240-008 : 2009 ; Aerospace series. Lamps, incandescent. Lamp, code 75 ; Product standard
EN 2240-009 : 2009 ; Aerospace series. Lamps, incandescent. Lamp, code 83 ; Product standard
EN 2240-010 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 84 ; Product standard
EN 2240-011 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 85 ; Product standard
EN 2240-012 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 95 ; Product standard
EN 2240-013 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 301 ; Product standard
EN 2240-014 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 303 ; Product standard
EN 2240-015 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 304 ; Product standard
EN 2240-016 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 305 ; Product standard
EN 2240-017 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 306 ; Product standard
EN 2240-018 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 307 ; Product standard
EN 2240-019 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 308 ; Product standard
EN 2240-020 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 311 ; Product standard
EN 2240-021 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 313 ; Product standard
EN 2240-022 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 315 ; Product standard
EN 2240-023 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 316 ; Product standard
EN 2240-024 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 327 ; Product standard
EN 2240-025 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 328 ; Product standard
EN 2240-026 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 330 ; Product standard
EN 2240-027 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 334 ; Product standard
EN 2240-028 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 337 ; Product standard
EN 2240-029 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 338 ; Product standard
EN 2240-030 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 345 ; Product standard
EN 2240-031 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 356 ; Product standard
EN 2240-032 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 376 ; Product standard
EN 2240-033 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 377 ; Product standard
EN 2240-034 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 382 ; Product standard
EN 2240-035 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 387 ; Product standard
EN 2240-036 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 388 ; Product standard
EN 2240-037 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 394 ; Product standard
EN 2240-038 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 401 ; Product standard
EN 2240-039 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 600 ; Product standard
EN 2240-040 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 680 ; Product standard
EN 2240-041 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 682 ; Product standard
EN 2240-042 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 683 ; Product standard
EN 2240-043 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 685 ; Product standard
EN 2240-044 : 2010 ; Aerospace series. Lamps, incandescent . Lamp, code 713 ; Product standard
EN 2240-045 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 714 ; Product standard
EN 2240-046 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 715 ; Product standard
EN 2240-047 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 718 ; Product standard
EN 2240-048 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 718 NPC. Product standard
EN 2240-049 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 757 ; Product standard
EN 2240-050 : 2010 ; Aerospace series. Lamps, incandescent. Lamp, code 1064 ; Product standard
EN 2240-051 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1163 ; Product standard
EN 2240-052 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1222 ; Product standard
EN 2240-053 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1308 ; Product standard
EN 2240-054 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1317 ; Product standard
EN 2240-055 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1495 ; Product standard
EN 2240-056 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1506 ; Product standard
EN 2240-057 : 2011 ; Aerospace series. Lamps, incandescent . Lamp, code 1512 ; Product standard
EN 2240-058 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1524 ; Product standard
EN 2240-059 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1591 ; Product standard
EN 2240-060 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1619 ; Product standard
EN 2240-061 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1683 ; Product standard
EN 2240-062 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1810 ; Product standard
EN 2240-063 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1815 ; Product standard
EN 2240-064 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1819 ; Product standard
EN 2240-065 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1820 ; Product standard
EN 2240-066 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1829 ; Product standard
EN 2240-067 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1843 ; Product standard
EN 2240-068 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1864 ; Product standard
EN 2240-069 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 1978 ; Product standard
EN 2240-070 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 2232 ; Product standard
EN 2240-071 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 3011 ; Product standard
EN 2240-072 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 3912 ; Product standard
EN 2240-073 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 4174 ; Product standard
EN 2240-074 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 5086 ; Product standard
EN 2240-075 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 5448 ; Product standard
EN 2240-076 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 5678 ; Product standard
EN 2240-077 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 6832 ; Product standard
EN 2240-078 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 6838 ; Product standard
EN 2240-079 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 6839 ; Product standard
EN 2240-080 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7007-704 ; Product standard
EN 2240-081 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7070 ; Product standard
EN 2240-082 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7079 ; Product standard
EN 2240-083 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7152 ; Product standard
EN 2240-084 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7153 ; Product standard
EN 2240-085 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7265 ; Product standard
EN 2240-086 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7333 ; Product standard
EN 2240-087 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7341 ; Product standard
EN 2240-088 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code A7512-12 ; Product standard
EN 2240-089 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code A7512-24 ; Product standard
EN 2240-090 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7683 ; Product standard
EN 2240-091 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7714 ; Product standard
EN 2240-092 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7715 ; Product standard
EN 2240-093 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 7839 ; Product standard
EN 2240-094 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 8022 ; Product standard
EN 2240-095 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 8552 ; Product standard
EN 2240-096 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 72301-6 ; Product standard
EN 2240-097 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 72601-12 ; Product standard
EN 2240-098 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 416650 ; Product standard
EN 2240-099 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 416700 ; Product standard
EN 2240-100 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 2078 ; Product standard
EN 2240-101 : 2011 ; Aerospace series. Lamps, incandescent. Lamp, code 404-02 ; Product standard
EN 2242 : 2012 ; Aerospace series. Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346 ;
EN 2243-1 : 2005 ; Aerospace series. Non-metallic materials. Structural adhesives. Test method. Single lap shear
EN 2243-2 : 2005 ; Aerospace series. Non-metallic materials. Structural adhesives. Test method. Peel metal-metal
EN 2243-3 : 1992 ; Structural adhesives. Test methods.. Peeling test metal-honeycomb core
EN 2243-3 : 2005 ; Aerospace series. Non-metallic materials. Structural adhesives. Test method. Peeling test metal-honeycomb core
EN 2243-4 : 1991 ; Structural adhesives. Test methods. Metal-honeycomb core flatwise tensile test
EN 2243-4 : 2005 ; Aerospace series. Non-metallic materials. Structural adhesives. Test method. Metal-honeycomb core flatwise tensile test
EN 2243-5 : 1992 ; Test methods for structural adhesives.. Ageing tests
EN 2243-5 : 2005 ; Aerospace series. Non-metallic materials. Structural adhesives. Test method. Ageing tests
EN 2243-6 : 2005 ; Aerospace series. Non-metallic materials. Structural adhesives. Test method. Determination of shear stress and shear strain
EN 2245 : 2012 ; Aerospace series. Pipelines for liquids and gases. Definitions.
EN 2252 : 2012 ; Aerospace series. Steel FE-PL1505 (15CrMoV6). 1 080 MPa $3L Rm $3L 1 250 MPa. Forgings. De $3L 100 mm.
EN 2256 : 2004 ; Aerospace series. Aluminium alloy AL-P2618A-T852 ; Hand and die forgings. a $3L 150 mm.
EN 2257 : 1997 ; Circular tubes for structures in aluminium and aluminium alloys. Diameter 6 mm $3L $iD $3L 100 mm. Thickness 1 mm $3L $ia $3L 6 mm. Dimensions.
EN 2258 : 1997 ; Circular tubes for fluids in aluminium and aluminium alloys. Diameter 3,2 mm $3L $iD $3L 100 mm. Thickness 0,6 mm $3L $ia $3L 2,5 mm. Dimensions.
EN 2262 : 1995 ; Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD.
EN 2264 : 1996 ; Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS$d2 lubricated. Classification : 900 MPa (at ambient temperature) /235^DC.
EN 2266-002 : 2005 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 200^DC. General
EN 2266-003 : 2005 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 200^DC. Ink jet printable. Product standard
EN 2266-005 : 2005 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 200^DC. UV laser printable. Product standard
EN 2266-007 : 2005 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 200^DC. UV laser printable multicore jacketed cable. Product standard
EN 2266-008 : 2015 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 200^DC. DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable. Product standard
EN 2267-002 : 2005 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 260^DC. General
EN 2267-002 : 2012 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 260^DC. General
EN 2267-002 : 2015 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 ^DC and 260 ^DC. General
EN 2267-003 : 2005 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 260^DC. Inkjet printable. Product standard
EN 2267-005 : 2006 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 260^DC. UV laser printable. Product standard
EN 2267-007 : 2005 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 260^DC. DMA family, single ink-jet printable and multicore assembly. Product standard
EN 2267-008 : 2005 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 260^DC. DM family, single UV laser printable and multicore assembly. Product standard
EN 2267-009 : 2005 ; Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55^DC and 260^DC. DRA family, single and multicore assembly. Product standard
EN 2267-009 : 2013 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between – 55 ^DC and 260 ^DC. DRA family, single and multicore assembly. Product standard
EN 2267-010 : 2005 ; Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55^DC and 260^DC. DR family, single UV laser printable. Product standard
EN 2267-010 : 2013 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between – 55^DC and 260^DC. DR family, single UV laser printable. Product standard
EN 2267-012 : 2015 ; Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55^DC and 260^DC. DZ family, single UV laser printable for use in low pressure atmosphere. Product standard
EN 2278 : 2014 ; Aerospace series. Steel X12CrNiMoV12-3 (1;4933). 900 MPa $3L Rm $3L 1 100 MPa. Bars. De $3L 150 mm.
EN 2282 : 1992 ; Characteristics of aircraft electrical supplies.
EN 2283 : 2010 ; Aerospace series. Testing of aircraft wiring.
EN 2284 : 1991 ; Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys.
EN 2285 : 1990 ; Specification for bushes plain, aluminium alloy with self-lubricating liner. Dimensions and loads.
EN 2286 : 1990 ; Specification for bushes flanged, aluminium alloy with self-lubricating liner. Dimensions and loads.
EN 2287 : 1990 ; Specification for bushes plain, corrosion resisting steel with self-lubricating liner. Dimensions and loads.
EN 2288 : 1990 ; Specification for bushes flanged, corrosion resisting steel with self-lubricating liner. Dimensions and loads.
EN 2289 : 1996 ; Rod bodies in aluminium alloy for flight controls. Technical specification.
EN 2290-1 : 1998 ; Rod bodies, flight control in aluminium alloy, for adjustable end fittings. Dimensions and loads
EN 2309 : 1990 ; Specification for hole sizes for solid rivets.
EN 2311 : 1990 ; Specification for bushes with self-lubricating liner. Technical specification.
EN 2311 : 2012 ; Aerospace series. Bushes with self-lubricating liner. Technical specification.
EN 2318 : 1992 ; Aluminium alloy AL-P2024-T3511 ; Extruded bars and sections 1,2 mm $3L a or D $3L 150 mm.
EN 2326 : 1992 ; Aluminium alloy AL-P6082-T6 ; Extruded bars and sections a or D $3L 200 mm.
EN 2327 : 1989 ; Specification for washers, lock with radial serrations in alloy steel. Dimensions.
EN 2327 : 2006 ; Aerospace series. Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods. Dimensions.
EN 2328 : 1990 ; Specification for washers, tab for flight control rods. Dimensions.
EN 2328 : 2006 ; Aerospace series. Washers, tab in corrosion resisting steel, cadmium plated for flight control rods. Dimensions.
EN 2329 : 1993 ; Textile glass fibre preimpregnates. Test method for the determination of mass per unit area.
EN 2330 : 1993 ; Textile glass fibre preimpregnates. Test method for the determination of the content of volatile matter.
EN 2331 : 1993 ; Textile glass fibre preimpregnates. Test method for the determination of the resin and fibre content and mass of fibre per unit area.
EN 2332 : 1993 ; Textile glass fibre preimpregnates. Test method for the determination of the resin flow.
EN 2334 : 1997 ; Chromic-sulphuric acid pickle of aluminium and aluminium alloys.
EN 2335 : 1990 ; Specification for bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads.
EN 2335 : 2005 ; Aerospace series. Bearings, spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads.
EN 2336 : 1990 ; Specification for bearings-spherical plain in steel with assembly slots. Dimensions and loads.
EN 2336 : 2005 ; Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads.
EN 2337 : 1996 ; Spherical plain bearings. Technical specification.
EN 2337 : 2006 ; Aerospace series. Spherical plain bearings. Technical specification.
EN 2346-002 : 2006 ; Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65^DC and 260^DC. General
EN 2346-003 : 2006 ; Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65^DC and 260^DC. DL family, single core. Product standard
EN 2346-004 : 2006 ; Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65^DC and 260^DC. DN family, single UV laser printable and multicore assembly. Light weight. Product standard
EN 2346-005 : 2013 ; Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65^DC and 260^DC. DW family, single UV laser printable and multicore assembly. Light weight. Product standard
EN 2348 : 1989 ; Specification for control cable assemblies. Technical specification.
EN 2349-201 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Visual inspection
EN 2349-202 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Examination of dimensions and mass
EN 2349-301 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Pick up and drop out voltage
EN 2349-302 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Insulation resistance
EN 2349-303 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Dielectric strength
EN 2349-304 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Operate and release time
EN 2349-305 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Bounce time
EN 2349-306 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Overload d.c and a.c.
EN 2349-307 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Contact voltage drop
EN 2349-308 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Coil current
EN 2349-309 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Exported spikes
EN 2349-310 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Rupture
EN 2349-312 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Electrical service life. Mixed load
EN 2349-316 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Mechanical life (endurance at reduced load)
EN 2349-317 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Service life of coil switching device
EN 2349-318 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Pick-up voltage at high temperature and drop-out voltage at low temperature
EN 2349-319 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Miss test
EN 2349-402 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Corrosion, salt spray
EN 2349-405 : 2006 ; Aerospace series. Requirements and test procedures for relays and contactors. Fluid resistance
EN 2349-407 : 2006 ; Aerospace Series. Requirements and test procedures for relays and contactors. Cold/low pressure and moist heat
EN 2349-409 : 2007 ; Aerospace series. Requirements and test procedures for relays and contactors. Ozone resistance
EN 2349-410 : 2007 ; Aerospace series. Requirements and test procedures for relays and contactors. Mould
EN 2349-411 : 2007 ; Aerospace series. Requirements and test procedures for relays and contactors. Temperature change
EN 2349-412 : 2007 ; Aerospace series. Requirements and test procedures for relays and contactors. Seal
EN 2349-413 : 2007 ; Aerospace series. Requirements and test procedures for relays and contactors. Vibration, sinusoidal and random
EN 2349-414 : 2007 ; Aerospace series. Requirements and test procedures for relays and contactors. Mechanical shock
EN 2349-415 : 2007 ; Aerospace series. Requirements and test procedures for relays and contactors. Acceleration
EN 2349-601 : 2007 ; Aerospace series. Requirements and test procedures for relays and contactors. Compass safety distance
EN 2353 : 1989 ; Specification for turnbarrels, control cable in corrosion resisting steel. Dimensions and loads.
EN 2354 : 1989 ; Specification for eye-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads.
EN 2355 : 1989 ; Specification for fork-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads.
EN 2356 : 1989 ; Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel. Dimensions and loads.
EN 2357 : 1989 ; Specification for stud-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads.
EN 2358 : 1989 ; Specification for eye-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads.
EN 2359 : 1989 ; Specification for fork-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads.
EN 2360 : 1989 ; Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable. Dimensions and loads.
EN 2361 : 1989 ; Specification for ball-ends, double shank in corrosion resisting steel swaged on type, control cable. Dimensions and loads.
EN 2362 : 1989 ; Specification for ball-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads.
EN 2363 : 1989 ; Specification for locking clips for turnbuckles of control cables. Dimensions.
EN 2364 : 1989 ; Specification for pins, shear headed, close tolerance.
EN 2365 : 1989 ; Specification for collars, aluminium alloy.
EN 2367 : 1990 ; Specification for split pins in steel EN 2573 ;
EN 2375 : 1992 ; Resin preimpregnated materials. Production batch sampling procedure.
EN 2377 : 1989 ; Specification for glass fibre reinforced plastics. Test method. Determination of apparent interlaminar shear strength.
EN 2378 : 1994 ; Fibre reinforced plastics. Determination of water absorption by immersion.
EN 2381 : 1992 ; Aluminium alloy AL-P7009-T7452 ; Hand forgings 40 mm $3L a $3L 150 mm.
EN 2384 : 1992 ; Aluminium alloy AL-P2014A-T6511 ; Extruded bars and sections a or D $3L 150 mm.
EN 2385 : 1992 ; Aluminium alloy AL-P7009-T74511 ; Extruded bars and sections a or D $3L 125 mm.
EN 2395 : 1994 ; Aluminium alloy AL-P2014A-T4 or T42 ; Sheet and strip 0,4 mm $3L a $3L 6 mm.
EN 2395 : 2005 ; Aerospace series. Aluminium alloy AL-P2014A-T4 or T42 ; Sheet and strip. 0,4 mm $3La $3L6 mm.
EN 2398 : 2008 ; Aerospace series. Heat resisting steel FE-PA2601(X6NiCrTiMoV26-15). Rm $3M 900 MPa. Bars for machined bolts. D $3L 25 mm.
EN 2399 : 2008 ; Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm $3M 900 MPa. Bars for forged bolts. D $3L 25 mm.
EN 2402 : 2014 ; Aerospace series. Heat resisting nickel base alloy NiCr20Co3Fe3 ; Annealed. Wire. D $3L 10 mm.
EN 2413 : 1995 ; Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 2422 : 2005 ; Aluminium alloy AL-P2124-T351 ; Plate. 25 mm $0L a $3L 120 mm.
EN 2424 : 2008 ; Aerospace series. Marking of aerospace products.
EN 2428 : 1995 ; Ethylene-propylene rubber (EPM/EPDM). Hardness 50 IRHD.
EN 2429 : 1995 ; Ethylene-propylene rubber (EPM/EPDM). Hardness 60 IRHD.
EN 2430 : 1995 ; Ethylene-propylene rubber (EPM/EPDM). Hardness 70 IRHD.
EN 2431 : 1995 ; Ethylene-propylene rubber (EPM/EPDM). Hardness 80 IRHD.
EN 2432 : 1995 ; Ethylene-propylene rubber (EPM/EPDM). Hardness 90 IRHD.
EN 2434-001 : 2010 ; Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Basic requirements
EN 2434-002 : 2010 ; Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High chemical resistance
EN 2434-003 : 2010 ; Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Flexible and high fluid resistance for interior
EN 2434-004 : 2010 ; Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High flexibility
EN 2435-001 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. Minimum requirements
EN 2435-002 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance
EN 2435-003 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance
EN 2435-004 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance
EN 2435-005 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance for military application
EN 2436-001 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. Basic requirements
EN 2436-002 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion resistance
EN 2436-003 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance
EN 2436-004 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance
EN 2436-005 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. For exterior use with surface preparation tolerance
EN 2436-006 : 2006 ; Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer. High corrosion resistance for military application
EN 2438 : 2008 ; Aerospace series. Steel FE-PL2102 (35NiCr6). 900 MPa $3L Rm $3L 1100 MPa. Bars. De $3L 40 mm.
EN 2439 : 2009 ; Aerospace series. Steel FE-PL2102 (34NiCr6). 900 MPa $3L Rm $3L 1100 MPa. Forgings. De $3L 40 mm.
EN 2446 : 2008 ; Aerospace series. Steel FE-PL1503 (35CrMo4). 1100 MPa $3L Rm $3L 1300 MPa. Bars. De $3L 25 mm.
EN 2448 : 2008 ; Aerospace series. Steel FE-PL1503 (35CrMo4). 900 MPa $3L Rm $3L 1100 MPa. Bars. De $3L 40 mm.
EN 2460 : 2009 ; Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa $3L Rm $3L 800 MPa. Bars. De $3L 70 mm.
EN 2461 : 2009 ; Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa $3L Rm $3L 800 MPa. Forgings. De $3L 70 mm.
EN 2465 : 2007 ; Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Softened. 450 MPa $3L Rm $3L 680 MPa. Bar for machining. 4 mm $3L De $3L 100 mm.
EN 2466 : 2009 ; Aerospace series. Steel FE-PA3901 (X2CrNi19-11). Softened. Forgings. De $3L 100 mm.
EN 2467 : 2007 ; Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Air melted. Softened. Plate, sheet and strip. 0,4 mm $3L a $3L 20 mm. 520 MPa $3L Rm $3L 670 MPa.
EN 2469 : 2007 ; Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm $3L D $3L 12,5 mm. 450 MPa $3L Rm $3L 650 MPa.
EN 2478 : 2008 ; Aerospace series. Steel FE-PL2107 (30NiCrMo16). 1220 MPa $3L Rm $3L 1370 MPa. Bars. De $3L 40 mm.
EN 2480 : 2008 ; Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1250 MPa $3L Rm $3L 1400 MPa. Bars. De $3L 75 mm.
EN 2481 : 2010 ; Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1250 MPa $3L Rm $3L 1400 MPa. Forgings. De $3L 75 mm.
EN 2482 : 2010 ; Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa $3L Rm $3L 1300 MPa. Bars. De $3L 100 mm.
EN 2483 : 2010 ; Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa $3L Rm $3L 1300 MPa. Forgings. De $3L 100 mm.
EN 2484 : 1989 ; Specification for microfilming of drawings. Aperture card for 35 mm microfilm.
EN 2486 : 2005 ; Aerospace series. Aluminium alloy AL-P2618A. Forging stock.
EN 2489 : 1995 ; Fibre reinforced plastics. Determination of the action of test fluids.
EN 2491 : 1997 ; Molybdenum disulphide dry lubricants. Coating methods.
EN 2491 : 2011 ; Aerospace series. Molybdenum disulphide dry lubricants. Coating methods.
EN 2497 : 1990 ; Specification for dry abrasive blasting of titanium and titanium alloys.
EN 2498 : 1990 ; Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank. Dimensions and loads.
EN 2499 : 1990 ; Specification for computer output microfiche (com) A6 microfiche.
EN 2501 : 1992 ; Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads.
EN 2511 : 2005 ; Aluminium alloy AL-P7075-T7351 ; Plate. 6 mm $0L a $3L 100 mm.
EN 2512 : 2014 ; Aerospace series. Aluminium alloy AL-P7175 ; T7351 ; Plate. 6mm $0L a $3L 100 mm.
EN 2515 : 1990 ; Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads.
EN 2516 : 1997 ; Passivation of corrosion resisting steels and decontamination of nickel base alloys.
EN 2535 : 2011 ; Aerospace series. Vacuum deposition of cadmium.
EN 2542 : 2008 ; Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Bar and wire. De $3L 40 mm. For prevailing torque nuts.
EN 2543 : 2009 ; Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Sheet and strip. 0,3 mm $3L a $3L 2 mm. For prevailing torque nuts.
EN 2544 : 1990 ; Specification for representation of rivets on drawings for aerospace equipment.
EN 2545-1 : 1995 ; Titanium and titanium alloy remelting stock and castings. Technical specification. General requirements
EN 2545-2 : 1995 ; Titanium and titanium alloy remeling stock and castings. Technical specification. Remelting stock
EN 2545-3 : 1995 ; Titanium and titanium alloy remelting stock and castings. Technical specification. Pre-production and production castings
EN 2546 : 1990 ; Specification for washers, lock with radial serrations in corrosion resisting steel. Dimensions.
EN 2546 : 2006 ; Aerospace series. Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods. Dimensions.
EN 2547 : 1989 ; Specification for filming of documents. Microfilm 105 mm (Microfiche A6).
EN 2549 : 1995 ; Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 2549 : 2006 ; Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 2550 : 1993 ; Rivets, solid 100$0D normal countersunk head, in aluminium 1050A, inch based series.
EN 2551 : 1993 ; Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2117, inch based series.
EN 2552 : 1993 ; Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series.
EN 2553 : 1993 ; Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2017A, inch based series.
EN 2555 : 1993 ; Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 5056A, inch based series.
EN 2556 : 1993 ; Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series.
EN 2558 : 1997 ; Carbon fibre preimpregnates. Determination of the volatile content.
EN 2560 : 1998 ; Carbon fibre preimpregnates. Determination of the resin flow.
EN 2561 : 1995 ; Carbon fibre reinforced plastics. Undirectional laminates. Tensile test parallel to the fibre direction.
EN 2563 : 1997 ; Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength.
EN 2564 : 1998 ; Carbon fibre laminates. Determination of the fibre, resin and void contents.
EN 2565 : 2013 ; Aerospace series. Preparation of carbon fibre reinforced resin panels for test purposes.
EN 2569 : 1991 ; Control cable fittings and turnbarrels. Technical specification.
EN 2570 : 1996 ; Nickel-cadmium batteries. Technical specification.
EN 2573 : 2007 ; Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Softened. Rm $3L 780 MPa. Wire. 0,25 mm $3L De $3L 3 mm.
EN 2574 : 1990 ; Specification for welds. Information on drawings.
EN 2575 : 1989 ; Specification for filming of documents. 16 mm microfilm.
EN 2583 : 1997 ; Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification : 1275 MPa (at ambient temperature)/650^DC. Technical specification.
EN 2584 : 1992 ; Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated loads at ambient temperature. Dimensions and loads.
EN 2585 : 1992 ; Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Wide series. Elevated loads at ambient temperature. Dimensions and loads.
EN 2587 : 1990 ; Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads.
EN 2588 : 1992 ; Bearings. Spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads.
EN 2588 : 2006 ; Aerospace series. Bearings, spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads.
EN 2591-100 : 2005 ; Aerospace series. Elements of electrical and optical connection. Test methods. General
EN 2591-101 : 1994 ; Elements of electrical and optical connection. Test methods. Visual examination
EN 2591-102 : 1996 ; Elements of electrical and optical connection. Test methods. Examination of dimensions and mass
EN 2591-201 : 1996 ; Elements of electrical and optical connection. Test methods. Contact resistance. Low level
EN 2591-202 : 1996 ; Elements of electrical and optical connection. Test methods. Contact resistance at rated current
EN 2591-203 : 1996 ; Elements of electrical and optical connection. Test methods. Electrical continuity at microvolt level
EN 2591-204 : 1996 ; Elements of electrical and optical connection. Test methods. Discontinuity of contacts in the microsecond range
EN 2591-205 : 1996 ; Elements of electrical and optical connection. Test methods. Housing (shell) electrical continuity
EN 2591-206 : 1996 ; Elements of electrical and optical connection. Test methods. Measurements of insulation resistance
EN 2591-207 : 1996 ; Elements of electrical and optical connection. Test methods. Voltage proof test
EN 2591-208 : 1996 ; Elements of electrical and optical connection. Test methods. Temperature rise due to rated current
EN 2591-209 : 1996 ; Elements of electrical and optical connection. Test methods. Current temperature derating
EN 2591-210 : 1998 ; Elements of electrical and optical connection. Test methods. Electrical overload
EN 2591-212 : 2005 ; Aerospace series. Elements of electrical and optical connection. Test methods. Surface transfer impedance
EN 2591-213 : 1998 ; Elements of electrical and optical connection. Test methods. Shielding effectiveness from 100 MHz to 1 GHz
EN 2591-214 : 2005 ; Aerospace series. Elements of electrical and optical connection. Test methods. Lightning strike, current and voltage pulse
EN 2591-214 : 2012 ; Aerospace series. Elements of electrical and optical connection. Test methods. Lightning strike, current and voltage pulse
EN 2591-216 : 1998 ; Elements of electrical and optical connection. Test methods. Engagement depth of contacts
EN 2591-220 : 2005 ; Aerospace series. Elements of electrical and optical connection. Test methods. Contact/conductor joint ageing by current and temperature cycling
EN 2591-221 : 2007 ; Aerospace series. Elements of electrical and optical connection. Test methods. Voltage standing wave ratio (VSWR)
EN 2591-222 : 2007 ; Aerospace series. Elements of electrical and optical connection. Testm ethods. Insertion loss (I.L.)
EN 2591-223 : 2007 ; Aerospace series. Elements of electrical and optical connection. Test methods. Measurement of characteristic impedance of a coaxial connector or contact
EN 2591-224 : 2007 ; Aerospace series. Elements of electrical and optical connection. Test methods. RF leakage
EN 2591-225 : 2007 ; Aerospace series. Elements of electrical and optical connection. Test methods. RF high potential withstanding voltage
EN 2591-226 : 2007 ; Aerospace series. Elements of electrical and optical connection. Test methods. Corona level
EN 2591-227 : 2015 ; Aerospace series. Elements of electrical and optical connection. Test methods. Partial discharges test
EN 2591-301 : 1996 ; Elements of electrical and optical connection. Test methods. Endurance at temperature
EN 2591-302 : 1998 ; Elements of electrical and optical connection. Test methods. Climatic sequence
EN 2591-303 : 1998 ; Elements of electrical and optical connection. Test methods. Cold/low pressure and damp heat
EN 2591-304 : 1998 ; Elements of electrical and optical connection. Test methods. Damp heat steady state
EN 2591-305 : 1998 ; Elements of electrical and optical connection. Test methods. Rapid change of temperature
EN 2591-306 : 1998 ; Elements of electrical and optical connection. Test methods. Mould growth
EN 2591-307 : 1998 ; Elements of electrical and optical connection. Test methods. Salt mist
EN 2591-307 : 2012 ; Aerospace series. Elements of electrical and optical connection. Test methods. Salt mist
EN 2591-308 : 1998 ; Elements of electrical and optical connection. Test methods. Sand and dust
EN 2591-309 : 1998 ; Elements of electrical and optical connection. Test methods. Dry heat
EN 2591-310 : 1998 ; Elements of electrical and optical connection. Test methods. Cold
EN 2591-311 : 1998 ; Elements of electrical and optical connection. Test methods. Low air pressure
EN 2591-312 : 1998 ; Elements of electrical and optical connection. Test methods. Air leakage
EN 2591-313 : 1998 ; Elements of electrical and optical connection. Test methods. Artificial rain
EN 2591-314 : 1998 ; Elements of electrical and optical connection. Test methods. Immersion at low air pressure
EN 2591-315 : 1998 ; Elements of electrical and optical connection. Test methods. Fluid resistance
EN 2591-315 : 2015 ; Aerospace series. Elements of electrical and optical connection. Test methods. Fluid resistance
EN 2591-316 : 1998 ; Elements of electrical and optical connection. Test methods. Ozone resistance
EN 2591-317 : 1998 ; Elements of electrical and optical connection. Test methods. Flammability
EN 2591-318 : 1998 ; Elements of electrical and optical connection. Test methods. Fire-resistance
EN 2591-319 : 1998 ; Elements of electrical and optical connection. Test methods. Gastightness of solderless wrapped connections
EN 2591-320 : 1998 ; Elements of electrical and optical connection. Test methods. Simulated solar radiation at ground level
EN 2591-321 : 1998 ; Elements of electrical and optical connection. Test methods. Damp heat, cyclic test
EN 2591-322 : 1998 ; Elements of electrical and optical connection. Test methods. Hermeticity
EN 2591-323 : 1998 ; Elements of electrical and optical connection. Test methods. Thermal shock
EN 2591-324 : 1998 ; Elements of electrical and optical connection. Test methods. Interfacial sealing
EN 2591-401 : 1996 ; Elements of electrical and optical connection. Test methods. Acceleration, steady state
EN 2591-402 : 1998 ; Elements of electrical and optical connection. Test methods. Shock
EN 2591-402 : 2012 ; Aerospace series. Elements of electrical and optical connection. Test methods. Shock
EN 2591-403 : 1998 ; Elements of electrical and optical connection. Test methods. Sinusoidal and random vibration
EN 2591-403 : 2012 ; Aerospace series. Elements of electrical and optical connection. Test methods. Sinusoidal and random vibration
EN 2591-404 : 1998 ; Elements of electrical and optical connection. Test methods. Transverse load
EN 2591-405 : 1998 ; Elements of electrical and optical connection. Test methods. Axial load
EN 2591-406 : 1998 ; Elements of electrical and optical connection. Test methods. Mechanical endurance
EN 2591-407 : 1999 ; Elements of electrical and optical connection. Test methods. Durability of contact retention system and seals
EN 2591-408 : 1998 ; Elements of electrical and optical connection. Test methods. Mating and unmating forces
EN 2591-409 : 1999 ; Elements of electrical and optical connection. Test methods. Contact retention in insert
EN 2591-410 : 1998 ; Elements of electrical and optical connection. Test methods. Insert retention in housing (axial)
EN 2591-411 : 1998 ; Elements of electrical and optical connection. Test methods. Insert retention in housing (torsional)
EN 2591-412 : 1999 ; Elements of electrical and optical connection. Test methods. Contact insertion and extraction forces
EN 2591-413 : 1998 ; Elements of electrical and optical connection. Test methods. Holding force of grounding spring system
EN 2591-414 : 1998 ; Elements of electrical and optical connection. Test methods. Unmating of lanyard release connectors
EN 2591-420 : 2006 ; Aerospace series. Elements of electrical and optical connection. Test methods. Mechanical strength of rear accessories
EN 2591-423 : 2006 ; Aerospace series. Elements of electrical and optical connection. Test methods. Connector rear accessories thread strength
EN 2591-515 : 2005 ; Aerospace series. Elements of electrical and optical connection. Test methods. Hydrolytic stability
EN 2591-609 : 2005 ; Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Effectiveness of cable attachment. Cable cyclic flexing
EN 2591 : 1992 ; Elements of electrical and optical connection. Test methods. General.
EN 2591-A2 : 1994 ; Elements of electrical and optical connection. Test methods. Examination of dimensions and mass
EN 2591-B1 : 1992 ; Elements of electrical and optical connection. Test methods. Contact resistance. Low level
EN 2591-B2 : 1994 ; Elements of electrical and optical connection. Test methods. Contact resistance at rated current
EN 2591-B3 : 1994 ; Elements of electrical and optical connection. Test methods. Electrical continuity at microvolt level
EN 2591-B4 : 1994 ; Elements of electrical and optical connection. Test methods. Discontinuity of contacts in the microsecond range
EN 2591-B5 : 1994 ; Elements of electrical and optical connection. Test methods. Housing (shell) electrical continuity
EN 2591-B6 : 1994 ; Elements of electrical and optical connection. Test methods. Measurement of insulation resistance
EN 2591-B7 : 1994 ; Elements of electrical and optical connection. Test methods. Voltage proof test
EN 2591-B8 : 1994 ; Elements of electrical and optical connection. Test methods. Temperature rise due to rated current
EN 2591-B9 : 1994 ; Elements of electrical and optical connection. Test methods. Current temperature derating
EN 2591-C1 : 1992 ; Elements of electrical and optical connection. Test methods. Endurance at temperature
EN 2591-D1 : 1992 ; Elements of electrical and optical connection. Test methods. Acceleration, steady state
EN 2593-001 : 2014 ; Aerospace series. Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown. Technical specification
EN 2596 : 1990 ; Specification for washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated. Dimensions.
EN 2596 : 2006 ; Aerospace series. Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods. Dimensions.
EN 2597 : 1998 ; Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction.
EN 2601 : 1996 ; Fork ends, adjustable. Technical specification.
EN 2602 : 2005 ; Aerospace series. Ports for adaptors, threaded, with lockring. Geometric configuration.
EN 2603 : 2005 ; Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration.
EN 2604 : 2005 ; Aerospace series. 8$0D 30′ interface for adaptors, threaded, with lockring. Geometric configuration.
EN 2605 : 2005 ; Aerospace series. 24$0D interface for adaptors, threaded, with lockring. Geometric configuration.
EN 2606 : 2009 ; Aerospace series. 60$0D interface for adaptors, threaded, with lockring. Geometric configuration.
EN 2607 : 2005 ; Aerospace series. O-rings for adaptors, threaded, with lockring. Survey.
EN 2608 : 2005 ; Aerospace series. Installation and removal requirements for 8$0D 30′ adaptors, threaded, with lockring.
EN 2609 : 1989 ; Specification for turnbarrels, control cable in copper-zinc alloys. Dimensions and loads.
EN 2624 : 2007 ; Aerospace series. Pressure impulse testing of hydraulic system components.
EN 2630 : 1994 ; Aluminium alloy AL-P7009-T74511 ; Extruded bars and sections a or D $3L 125 mm with peripheral coarse grain control.
EN 2632 : 1994 ; Aluminium alloy AL-P7075-T73511 ; Extruded bars and sections a or D $3L 100 mm with peripheral coarse grain control.
EN 2632 : 2005 ; Aerospace series. Aluminim alloy AL-P7075 ; T73511 ; Extruded bar and section. a or D $3L 150 mm with peripheral coarse grain control.
EN 2633 : 1994 ; Aluminium alloy AL-P2024-T3511 ; Extruded bars and sections 1,2 mm $3L a or D $3L 150 mm with peripheral coarse grain control.
EN 2633 : 2015 ; Aerospace series. Aluminium alloy AL-P2024 ; AlCu4Mg1 ; T3511 ; Extruded bars and sections. 1,2 mm $3L De $3L 160 mm with peripheral coarse grain control.
EN 2635 : 2005 ; Aerospace series. Aluminium alloy AL-P2014A. T6511 ; Extruded bar and section. a or D $3L 200 mm with peripheral coarse grain control.
EN 2636 : 1994 ; Aluminium alloy AL-P6082-T6 ; Extruded bars and sections a or D $3L 200 mm with peripheral coarse grain control.
EN 2641 : 1989 ; Specification for control cable assemblies. Combinations and dimensions.
EN 2644 : 1998 ; Rod assemblies for flight controls. Technical specification.
EN 2645 : 2005 ; Aerospace series. Lockrings for adaptors, threaded, with lockring. Dimensions.
EN 2647 : 1995 ; Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS$d2 lubricated. Classification : 900 MPa (at ambient temperature)/235^DC.
EN 2647 : 2006 ; Aerospace series. Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS$d2 lubricated. Classification : 900 MPa (at ambient temperature) / 235^DC.
EN 2648 : 1995 ; Washers, concave, in alloy steel, cadmium plated.
EN 2648 : 2013 ; Aerospace series. Washers, concave, in alloy steel, cadmium plated.
EN 2649 : 1995 ; Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235^DC.
EN 2650 : 1997 ; Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature) /425^DC.
EN 2651 : 1997 ; Screws, pan head, slotted, threaded to head, in brass, tin plated. Classification : 380 MPa (at ambient temperature)/80^DC.
EN 2652 : 1997 ; Screws, 100$0D countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature)/235^DC.
EN 2653 : 1997 ; Screws, 100$0D countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature) /425^DC.
EN 2654 : 1997 ; Screws, 100$0D countersunk normal head, slotted, threaded to head, in brass, tin plated. Classification : 380 MPa (at ambient temperature)/80^DC.
EN 2665-001 : 1999 ; Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Technical specification
EN 2665-001 : 2013 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. Technical specification
EN 2665-003 : 1999 ; Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals. Product standard
EN 2665-004 : 1999 ; Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard
EN 2665-004 : 2013 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. UNC thread terminals. Product standard
EN 2680 : 2006 ; Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS$d2 lubricated. Classification : 900 MPa (at ambient temperature) / 235^DC.
EN 2681 : 2004 ; Aerospace series. Aluminium alloy AL-P7010-T74 ; Hand and die forgings. a $3L 150 mm.
EN 2684 : 2004 ; Aerospace series. Aluminium alloy AL-P7010-T7651 ; Plate. 6 mm $0L a $3L 140 mm.
EN 2687 : 2004 ; Aerospace series. Aluminium alloy AL-P7010-T7451 ; Plate. 6 mm $0L a $3L 160 mm.
EN 2693 : 1994 ; Aluminium alloy. AL-P5086-H111 ; Sheet and strip 0,3 mm $3L a $3L 6 mm.
EN 2693 : 2005 ; Aerospace series. Aluminium alloy AL-P5086-H111 ; Sheet and strip. 0,3 mm $3La $3L6 mm.
EN 2694 : 1994 ; Aluminium alloy. AL-P6061-T6 or T62 ; Sheet and strip 0,4 mm $3L a $3L 6 mm.
EN 2694 : 2005 ; Aerospace series. Aluminium alloy AL-P6061-T6 or T62 ; Sheet and strip. 0,4 mm $3L a $3L 6 mm.
EN 2695 : 1994 ; Aluminium alloy. AL-P6081-T6 ; Sheet and strip 0,3 mm $3L a $3L 6 mm.
EN 2695 : 2005 ; Aerospace series. Aluminium alloy AL-P6081-T6 ; Sheet and strip. 0,3 mm $3La $3L6 mm.
EN 2696 : 1994 ; Aluminium alloy. AL-P7075-T6 or T62 ; Sheet and strip 0,4 mm $3L a $3L 6 mm.
EN 2696 : 2005 ; Aerospace series. Aluminium alloy AL-P7075-T6 or T62 ; Sheet and strip. 0,4 mm $3La $3L6 mm.
EN 2702 : 2005 ; Aerospace series. Aluminium alloy. AL-P6061 ; T6 or T62 ; Drawn or extruded bar and section. a or D $3L 200 mm.
EN 2703 : 2005 ; Aerospace series. Aluminium alloy AL-P2024-T4 or T42 ; Clad sheet and strip. 0,3 mm $3L a $3L 6 mm.
EN 2704 : 2015 ; Aerospace series. Aluminium alloy AL-P2024 ; AlCu4Mg1 ; T3511 ; Drawn bars. De $3L 75 mm.
EN 2713-002 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200^DC. Screened and jacketed. General
EN 2713-003 : 2005 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200 ^DC. Screened (spiral) and jacketed, ink jet printable. Product standard
EN 2713-004 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200^DC. Screened (braided) and jacketed, ink jet printable. Product standard
EN 2713-005 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200^DC. Screened (spiral) and jacketed, CO2 laser printable. Product standard
EN 2713-006 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200^DC. Screened (braided) and jacketed, CO$d2 laser printable. Product standard
EN 2713-007 : 2005 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200^DC. Screened (spiral) and jacketed, UV laser printable. Product standard
EN 2713-008 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200$0D. Screened (braided) and jacketed, UV laser printable. Product standard
EN 2713-009 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200^DC. Screened (spiral) and jacketed, YAG X3 laser printable. Product standard
EN 2713-010 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200^DC. Screened (braided) and jacketed, YAG X3 laser printable. Product standard
EN 2713-011 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 200^DC. Silver plated copper screened (spiral) and jacketed, UV laser printable. Product standard
EN 2714-002 : 2005 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened and jacketed. General
EN 2714-002 : 2012 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened and jacketed. General
EN 2714-003 : 2005 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened (spiral) and jacketed, ink jet printable. Product standard
EN 2714-004 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened (braided) and jacketed, ink jet printable. Product standard
EN 2714-005 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened (spiral) and jacketed, CO2 laser printable. Product standard
EN 2714-006 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened (braided) and jacketed, CO2 laser printable. Product standard
EN 2714-007 : 2005 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened (spiral) and jacketed, UV laser printable. Product standard
EN 2714-008 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened (braided) and jacketed, UV laser printable. Product standard
EN 2714-009 : 2007 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 ^DC and 260 ^DC. Screened (spiral) and jacketed, YAG X3 laser printable. Product standard
EN 2714-010 : 2006 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. Screened (braided) and jacketed, YAG X3 laser Printable. Product standard
EN 2714-011 : 2005 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. DM family, screened (spiral) and jacketed, UV laser printable. Product standard
EN 2714-012 : 2005 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. DM family, screened (braided) and jacketed, UV laser printable. Product standard
EN 2714-013 : 2005 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. DR family, screened (spiral) and jacketed, UV laser printable. Product standard
EN 2714-014 : 2009 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55^DC and 260^DC. DR family, 5 to 10 cores, taped, screened (braided) and jacketed, UV laser printable. Product standard
EN 2714-014 : 2016 ; Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 ^DC and 260 ^DC. DR family, 4 to 11 cores, taped, screened (braided) and jacketed, UV laser printable. Product standard
EN 2731 : 2005 ; Aerospace series. Magnesium alloy MG-C46001 ; T6 ; Sand casting.
EN 2732 : 2005 ; Magnesium alloy MG-C46001-T6 ; Chill casting.
EN 2744 : 1992 ; Non-metallic materials. Preferred test temperatures.
EN 2746 : 1998 ; Glass fibre reinforced plastics. Flexural test. Three point bend method.
EN 2747 : 1998 ; Glass fibre reinforced plastics. Tensile test.
EN 2752 : 1990 ; Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification : 1100 MPa/235^DC.
EN 2753 : 1996 ; Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS$d2 lubricated. Classification. 1100 MPa (at ambient temperature) / 235^DC.
EN 2754 : 2006 ; Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification : 1100 MPa/235^DC.
EN 2755 : 2009 ; Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification.
EN 2756 : 2010 ; Aerospace series. Lamps, incandescent. Test methods.
EN 2757 : 2011 ; Aerospace series. Structural adhesives system. Test method. Determination of the drying and ignition residues of primers.
EN 2781 : 1998 ; Non-metallic materials. Structural adhesives. Test methods. Determination of the primer thickness.
EN 2786 : 2008 ; Aerospace series. Electrolytic silver plating of fasteners.
EN 2794-001 : 1999 ; Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Technical specification
EN 2794-001 : 2014 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. Technical specification
EN 2794-003 : 1999 ; Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals. Product standard
EN 2794-004 : 1999 ; Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard
EN 2794-004 : 2014 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard
EN 2802 : 2005 ; Aluminium alloy AL-P7475-T761 ; Sheet and strip. 0,6 mm $3L a $3L 6 mm.
EN 2803 : 2005 ; Aerospace series. Aluminium alloy AL-P7475-T761 ; Clad sheet and strip. 1,0 mm $3L a $3L 6 mm.
EN 2812 : 2009 ; Aerospace series. Stripping of electric cables.
EN 2815 : 2009 ; Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D $3L 200 mm. Rm $3M 965 MPa.
EN 2817 : 2009 ; Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D $3L 200 mm. Rm $3M 1070 MPa.
EN 2818 : 2009 ; Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 200 mm. Rm $3M 1070 MPa.
EN 2821 : 2007 ; Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D $3L 200 mm. Rm $3M 1310 MPa.
EN 2824 : 2011 ; Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media.
EN 2825 : 2011 ; Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density.
EN 2826 : 2011 ; Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke.
EN 2828 : 1993 ; Adhesion test for metallic coatings by burnishing.
EN 2829 : 1995 ; Adhesion test for metallic coatings by shot peening.
EN 2830 : 1993 ; Adhesion test for metallic coatings by shearing action.
EN 2831 : 1993 ; Hydrogen embrittlement of steels. Test by slow bending.
EN 2832 : 1993 ; Hydrogen embrittlement of steels. Notched specimen test.
EN 2833-005 : 2013 ; Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification. Glass fabric/phenolic resin preimpregnate
EN 2835 : 2012 ; Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 40 IRHD.
EN 2836 : 2012 ; Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 50 IRHD.
EN 2837 : 2012 ; Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 60 IRHD .
EN 2838 : 2013 ; Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 70 IRHD.
EN 2839 : 2013 ; Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 80 IRHD.
EN 2840 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD.
EN 2841 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 60 IRHD.
EN 2842 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 70 IRHD.
EN 2843 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 80 IRHD.
EN 2844 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 90 IRHD.
EN 2845 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 50 IRHD.
EN 2846 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 60 IRHD.
EN 2847 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 70 IRHD.
EN 2848 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 80 IRHD.
EN 2849 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 90 IRHD.
EN 2851 : 1992 ; Marking of parts and assemblies other than engines. Indications on drawings.
EN 2852 : 2010 ; Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated. Classification : 1100 MPa/650^DC.
EN 2853 : 2005 ; Current ratings for electrical cables with conductor EN 2083 ;
EN 2854-002 : 2009 ; Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2 ; Operating temperatures between -55^DC and 260^DC. General
EN 2854-003 : 2009 ; Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm$u2 ; Operating temperatures between -55 ^DC and 260 ^DC. Product standard
EN 2856 : 2006 ; Aerospace series. Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore. Classification : 1100 MPa/235^DC.
EN 2858-1 : 1994 ; Titanium and titanium alloys. Forging stock and forgings. Technical specifications. General requirements
EN 2858-2 : 1994 ; Titanium and titanium alloys. Forging stock and forgings. Technical specification.. Forging stock
EN 2858-3 : 1994 ; Titanium and titanium alloys. Forging stock and forgings. Technical specifications. Pre-production and production forgings
EN 2859 : 1995 ; Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 2859 : 2006 ; Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) / 235^DC.
EN 2862 : 2009 ; Aerospace series. Nuts, anchor, self-locking, fixed, 90$0D corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 2863 : 2010 ; Aerospace series. Nuts, anchor, self-locking, fixed, 90$0D corner, with counterbore, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 2865 : 2009 ; Aerospace series. Nuts, anchor, self-locking, floating, two lugs, with counterbore, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 ^DC.
EN 2866 : 2009 ; Aerospace series. Nuts, anchor, self-locking, floating, one lug, with counterbore, in steel, cadmium plated, MoS2 lubricated. Classification : 1110 MPa (at ambient temperature)/235^DC.
EN 2867 : 2009 ; Aerospace series. Nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 ^DC.
EN 2869 : 2009 ; Aerospace series. Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated. Classification : 1100 MPa (at ambient temperature) / 650^DC.
EN 2870 : 1996 ; Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature) /315^DC.
EN 2874 : 1996 ; Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification : 1550 MPa (at ambient temperature) /315^DC.
EN 2881 : 2006 ; Aerospace series. Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS$d2 lubricated. Classification : 900 MPa (at ambient temperature) / 120^DC.
EN 2882 : 2006 ; Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 235^DC.
EN 2883 : 2009 ; Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 2884 : 1996 ; Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 2885 : 1996 ; Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature)/235^DC.
EN 2886 : 1996 ; Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235^DC.
EN 2887 : 1995 ; Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature)/425^DC.
EN 2888 : 1995 ; Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature)/425^DC.
EN 2888 : 2006 ; Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature) / 425^DC.
EN 2889 : 1995 ; Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235^DC.
EN 2889 : 2006 ; Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature) / 235^DC.
EN 2897 : 1996 ; Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) /235^DC.
EN 2898 : 2008 ; Aerospace series. Corrosion and heat resisting steel rivets. Technical specification.
EN 2906 : 1994 ; Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286). Classification : 1100 MPa (at ambient temperature)/650^DC.
EN 2907 : 1996 ; Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated. Classification : 1 100 MPa (at ambient temperature)/650^DC.
EN 2908 : 1994 ; Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286). Classification : 1100 MPa (at ambient temperature)/650^DC.
EN 2909 : 1995 ; Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification : 1100 MPa (at ambient temperature)/650^DC.
EN 2910 : 1994 ; Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286). Classification : 1100 MPa (at ambient temperature)/650^DC.
EN 2911 : 1995 ; Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification : 1100 MPa (at ambient temperature)/650^DC.
EN 2912 : 1996 ; Washers, flat, large diameter, in aluminium alloy, anodized or chromated.
EN 2913 : 1996 ; Washers, flat, large diameter, in alloy steel, cadmium plated.
EN 2913 : 2000 ; Washers, flat, large diameter, in steel, cadmium plated.
EN 2914 : 1996 ; Washers, flat, large diameter, in heat resisting steel, passivated.
EN 2925 : 1994 ; Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286). Classification : 900 MPa (at ambient temperature)/650^DC.
EN 2926 : 1996 ; Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature)/650^DC.
EN 2927 : 1996 ; Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification : 1275 MPa (at ambient temperature)/650^DC.
EN 2928 : 1996 ; Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature)/650^DC.
EN 2929 : 1996 ; Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 2930 : 1996 ; Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 2931 : 1993 ; Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification : 900 MPa (at ambient temperature)/650^DC.
EN 2932 : 1996 ; Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature)/650^DC.
EN 2933 : 1996 ; Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification : 1275 MPa (at ambient temperature)/650^DC.
EN 2934 : 1996 ; Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature)/650^DC.
EN 2935 : 1996 ; Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 2936 : 1996 ; Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 2937 : 1994 ; Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification : 900 MPa (at ambient temperature)/650^DC.
EN 2938 : 1996 ; Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification : 900 MPa (at ambient temperature)/650^DC.
EN 2939 : 1994 ; Screws, 100$0D countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286). Classification : 900 MPa (at ambient temperature)/650^DC.
EN 2940 : 1996 ; Screws, 100$0D countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification : 900MPa (at ambient temperature)/650^DC.
EN 2941 : 2008 ; Aerospace series. Nickel alloy rivets. Technical specification.
EN 2942 : 1998 ; Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated.
EN 2943 : 1998 ; Inserts, screw thread, helical coil, self-locking. Technical specification.
EN 2944 : 1998 ; Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004 ;
EN 2945 : 1998 ; Inserts, screw thread, helical coil, self-locking. Assembly procedure.
EN 2947 : 2006 ; Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D $3L 2,3 mm.
EN 2948 : 1997 ; Washers, tab, in heat resisting steel, passivated.
EN 2949 : 1997 ; Washers, wire locking, in corrosion resisting steel, passivated.
EN 2950 : 2008 ; Aerospace series. Test method. Wrought heat resisting alloys Semifinished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects.
EN 2954-001 : 2010 ; Aerospace series. Macrostructure of titanium and titanium alloy wrought products. General requirements
EN 2954-002 : 2010 ; Aerospace series. Macrostructure of titanium and titanium alloy wrought products. Macrostructure of bar, section, forging stock and forgings
EN 2955 : 1993 ; Aerospace series. Recycling of titanium and titanium alloy scrap.
EN 2995-001 : 2006 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A. Technical specification
EN 2995-004 : 2006 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A. With signal contact. Product standard
EN 2995-005 : 2006 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A. With polarized signal contact. Product standard
EN 2996-001 : 2006 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A. Technical specification
EN 2996-004 : 2006 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A. With signal contact. Product standard
EN 2996-005 : 2006 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A. With polarized signal contact. Product standard
EN 2997-001 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Technical specification
EN 2997-001 : 2011 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Technical specification
EN 2997-1 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Technical specification
EN 2997-002 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Specification of performance and contact arrangements
EN 2997-002 : 2012 ; Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures — 65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Specification of performance and contact and contact arrangements
EN 2997-002 : 2016 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Specification of performance and contact arrangements
EN 2997-2 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Specification of performance and contact arrangements
EN 2997-003 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Square flange receptacle. Product standard
EN 2997-003 : 2012 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures — 65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Square flange receptacle
EN 2997-3 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Square flange receptacle. Product standard
EN 2997-004 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Jam-nut mounted receptacle. Product standard
EN 2997-4 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Jam-nut mounted receptacle. Product standard
EN 2997-005 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Hermetic square flange receptacle. Product standard
EN 2997-005 : 2012 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Hermetic square flange receptacle. Product standard
EN 2997-005 : 2016 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Hermetic square flange receptacle. Product standard
EN 2997-5 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Hermetic square flange receptacle. Product standard
EN 2997-006 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Hermetic jam-nut mounted receptacle. Product standard
EN 2997-6 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Hermetic jam-nut mounted receptacle. Product standard
EN 2997-007 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Hermetic receptacle with round flange attached by welding or brazing. Product standard
EN 2997-007 : 2016 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Hermetic receptacle with round flange attached by welding or brazing. Product standard
EN 2997-7 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Hermetic receptacle with round flange attached by soldering or brazing. Product standard
EN 2997-008 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Plug. Product standard
EN 2997-8 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Plug. Product standard
EN 2997-009 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Protective cover for receptacle. Product standard
EN 2997-009 : 2010 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Protective cover for receptacle. Product standard
EN 2997-009 : 2014 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Protective cover for receptacle. Product standard
EN 2997-9 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Protective cover for receptacle. Product standard
EN 2997-010 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Protective cover for plug. Product standard
EN 2997-010 : 2010 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Protective cover for plug. Product standard
EN 2997-010 : 2014 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Protective cover for plug. Product standard
EN 2997-10 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Protective cover for plug. Product standard
EN 2997-011 : 2006 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Dummy receptacle. Product standard
EN 2997-011 : 2010 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Dummy receptacle. Product standard
EN 2997-11 : 1997 ; Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175^DC continuous, 200^DC continuous, 260^DC peak. Dummy receptacle. Product standard
EN 2997-012 : 2009 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Jam-nut for jam-nut receptacles. Product standard
EN 2997-013 : 2009 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. O-ring seal for jam-nut receptacles. Product standard
EN 2997-014 : 2011 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Square flange receptacle with integrated accessory. Product standard
EN 2997-014 : 2016 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Square flange receptacle with integrated accessory. Product standard
EN 2997-015 : 2011 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Jam-nut mounted receptacle with integrated accessory. Product standard
EN 2997-016 : 2010 ; Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Plug with integrated accessory. Product standard
EN 2998 : 1996 ; Washers, flat, in heat resisting steel, passivated.
EN 3004 : 1997 ; Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286). Classification : 1100 MPa (at ambient temperature)/650^DC. Technical specification.
EN 3005 : 2004 ; Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated. Classification : 1210 MPa (at ambient temperature) / 730^DC. Technical specification.
EN 3006 : 1994 ; Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification : 900 MPa (at ambient temperature)/650^DC.
EN 3007 : 1996 ; Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature)/650^DC.
EN 3008 : 1998 ; Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification : 1275 MPa (at ambient temperature)/650^DC.
EN 3009 : 1998 ; Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification. 1275 MPa (at ambient temperature)/650^DC.
EN 3010 : 1998 ; Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 3011 : 1998 ; Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature)/730 ^DC.
EN 3012 : 1996 ; Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 3013 : 1996 ; Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 3014 : 2015 ; Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification : 1 100 MPa (at ambient temperature) / 650 ^DC.
EN 3015 : 2015 ; Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated. Classification : 1 100 MPa (at ambient temperature) / 650 ^DC.
EN 3016 : 2008 ; Aerospace series. Washers countersunk, load spreading. Heat resisting steel.
EN 3017 : 2008 ; Aerospace series. Washers, facing/packing. Heat resisting steel.
EN 3019 : 2008 ; Aerospace series. Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286). Classification : 1100 MPa (at ambient temperature)/650 ^DC.
EN 3020 : 2008 ; Aerospace series. Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286), silver plated. Classification : 1100 MPa (at ambient temperature)/650 ^DC.
EN 3026 : 1994 ; Test method for dry film lubricants. Corrosion test on steel specimens.
EN 3027 : 1994 ; Test method for dry film lubricants. Salt spray test.
EN 3030 : 1994 ; Test method for dry film lubricants. Solids content.
EN 3032 : 1994 ; Test method for dry film lubricants. Thickness measurement.
EN 3033 : 2008 ; Aerospace series. Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated. Classification : 1100 MPa/425^DC.
EN 3034 : 2009 ; Aerospace series. Nuts, self-locking, hexagonal with captive washer. In heat resisting steel FE-PA92HT (A286), silver coated. Classification : 1100 MPa/425 ^DC .
EN 3035 : 1997 ; Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 3037 : 1997 ; Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3038 : 1997 ; Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3042 : 1992 ; Quality assurance. EN aerospace products. Qualification procedure.
EN 3043 : 2008 ; Aerospace series. Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286). Classification : 900 MPa/650 ^DC, manufacturing method optional. Technical specification.
EN 3044 : 1998 ; Installation holes for inserts, screw thread, helical coil, self-locking. Design standard.
EN 3045 : 1994 ; Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2 ; Reduced clearance category. Dimensions and loads.
EN 3046 : 1994 ; Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2 ; Reduced clearance category. Dimensions and loads.
EN 3047 : 1994 ; Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2 ; Reduced clearance category. Dimensions and loads.
EN 3048 : 1992 ; Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated loads at ambient temperature. Dimensions and loads.
EN 3049 : 1998 ; O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD.
EN 3050 : 1998 ; O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification.
EN 3052 : 1994 ; Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3052 : 2009 ; Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature) / 425 ^DC.
EN 3053 : 1994 ; Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Dimensions and loads.
EN 3054 : 1994 ; Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Dimensions and loads.
EN 3055 : 1994 ; Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Dimensions and loads.
EN 3056 : 1994 ; Bearings, airframe rolling. Rigid double row ball bearings in steel. Dimensions and loads.
EN 3057 : 1994 ; Bearings, airframe rolling. Rigid double row ball bearings in steel, cadmium plated. Dimensions and loads.
EN 3058 : 1994 ; Bearings, airframe rolling. Rigid double row ball bearings in corrosion resisting steel. Dimensions and loads.
EN 3059 : 2007 ; Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated. Dimensions and loads.
EN 3060 : 2007 ; Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated. Dimensions and loads.
EN 3061 : 2007 ; Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing. Dimensions and loads.
EN 3063 : 1994 ; Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 3064 : 1996 ; Shank nuts, self-locking, serrated. Installation procedure.
EN 3065 : 1996 ; Installation holes for self-locking, serrated shank nuts. Design standard.
EN 3079 : 2006 ; Pipe coupling 8$0D30′ up to 28000 kPa. Adaptors. Metric series. Technical specification.
EN 3080 : 2006 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Tees, reduced, branch with thrust wire nut.
EN 3102 : 2013 ; Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility.
EN 3112 : 1995 ; Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature)/235^DC.
EN 3114-001 : 2006 ; Aerospace series. Test method. Microstructure of ($Ga + $Gb) titanium alloy wrought products. General requirements
EN 3114-002 : 2007 ; Aerospace series. Test method. Microstructure of ($Ga + $Gb) titanium alloy wrought products. Microstructure of bars, sections, forging stock and forgings
EN 3114-003 : 2006 ; Aerospace series. Test method. Microstructure of ($Ga + $Gb) titanium alloy wrought products. Microstructure of plate
EN 3114-004 : 2006 ; Aerospace series. Test method. Microstructure of ($Ga + $Gb) titanium alloy wrought products. Microstructure of sheet for superplastic forming
EN 3115 : 2009 ; Aerospace series. Aluminium alloy 7050-T73 ; Wire for solid rivets. D $3L 10 mm.
EN 3120 : 2012 ; Aerospace series. Titanium alloy TI-P64003 ; Cold worked and stress relieved. Seamless tube for pressure systems. 4 mm $3L D $3L 51 mm. 690 MPa $3L Rm $3L 1 030 MPa.
EN 3135 : 1996 ; Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series.
EN 3136 : 1996 ; Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series.
EN 3141 : 1996 ; Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series.
EN 3142 : 1996 ; Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series.
EN 3148 : 2008 ; Aerospace series. Shank nuts, self-locking, flange restrained. Installation procedure.
EN 3149 : 1997 ; Shank nuts. Installation holes, 60$0D swage, flanges. Design standard.
EN 3150 : 1995 ; Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718).
EN 3151 : 1995 ; Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718).
EN 3152 : 2004 ; Aerospace series. Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated. Classification : 1100 MPa (at ambient temperature)/425^DC. Technical specification.
EN 3155-001 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Technical specification
EN 3155-001 : 2016 ; Aerospace series. Electrical contacts used in elements of connection. Technical Specification
EN 3155-002 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. List and utilization of contacts
EN 3155-002 : 2011 ; Aerospace series. Electrical contacts used in elements of connection. List and utilization of contacts
EN 3155-003 : 2005 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
EN 3155-004 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class T. Product standard
EN 3155-005 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class T. Product standard
EN 3155-008 : 2005 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
EN 3155-009 : 2006 ; Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
EN 3155-009 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
EN 3155-012 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 8, male, type D, solder, class R. Product standard
EN 3155-013 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 8, female, type D, solder, class R. Product standard
EN 3155-014 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
EN 3155-015 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
EN 3155-016 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
EN 3155-017 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, relay base, female, type A, crimp, class P. Product standard
EN 3155-018 : 2005 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
EN 3155-019 : 2005 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
EN 3155-022 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, rectangular, male, type A, crimp, class R. Product standard
EN 3155-023 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, rectangular, female, type A, crimp, class R. Product standard
EN 3155-024 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard
EN 3155-025 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard
EN 3155-026 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class R. Product standard
EN 3155-026 : 2010 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class R. Product standard
EN 3155-027 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class R. Product standard
EN 3155-027 : 2015 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class R. Product standard
EN 3155-028 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R. Product standard
EN 3155-029 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R. Product standard
EN 3155-030 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R. Product standard
EN 3155-031 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R. Product standard
EN 3155-032 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R. Product standard
EN 3155-033 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical,coaxial, 50 ohms, size 5, female, type D, crimp, class R. Product Standard
EN 3155-034 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, male, type D, crimp, class R. Product standard
EN 3155-035 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, female, type D, crimp, class R. Product standard
EN 3155-035 : 2012 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, female, type D, crimp, class R. Product standard
EN 3155-039 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard
EN 3155-040 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 12, male, type D, solder, class R. Product standard
EN 3155-041 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 12, female, type D, solder, class R. Product standard
EN 3155-042 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P. Product standard
EN 3155-043 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P. Product standard
EN 3155-044 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male 044, type A, double crimping, class T. Product standard
EN 3155-045 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, double crimping, class T. Product standard
EN 3155-046 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, double crimping, class S. Product Standard
EN 3155-047 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, double crimping, class S. Product standard
EN 3155-052 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male 052, type A, crimp, class S. Product standard
EN 3155-053 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female 053, type A, crimp, class S. Product standard
EN 3155-054 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male thermocouple NiAl, type C, crimp, class T. Product standard
EN 3155-055 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T. Product standard
EN 3155-056 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T. Product standard
EN 3155-057 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T. Product standard
EN 3155-058 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 16, male, type D, solder, class R. Product standard
EN 3155-059 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard
EN 3155-060 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 12, male, type D, solder, class R. Product standard
EN 3155-061 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 12, female, type D, solder, class R. Product standard
EN 3155-063 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms size 1, male, type D, solder, class R. Product standard
EN 3155-064 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms size 1, female, type D, solder, class R. Product standard
EN 3155-065 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S, size 8 ; Product standard
EN 3155-065 : 2013 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S, size 8 ; Product standard
EN 3155-065 : 2015 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S, size 8 ; Product standard
EN 3155-066 : 2006 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S, size 8 ; Product standard
EN 3155-066 : 2013 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S, size 8 ; Product standard
EN 3155-067 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard
EN 3155-068 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 08, female, type D, solder, class R. Product standard
EN 3155-069 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 16, female, type D, solder, class P. Product standard
EN 3155-070 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
EN 3155-070 : 2014 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
EN 3155-071 : 2007 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
EN 3155-071 : 2014 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
EN 3155-074 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, quadrax, size 8, male, type E, crimp, class R. Product standard
EN 3155-075 : 2009 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, quadrax, size 08, female, type E, crimp, class R. Product standard
EN 3155-076 : 2012 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class R. Product standard
EN 3155-077 : 2012 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class R. Product standard
EN 3155-078 : 2014 ; Aerospace series. Electrical contacts used in elements of connection. Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S. Product standard
EN 3155-079 : 2014 ; Aerospace series. Electrical contacts used in elements of connection. Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S. Product standard
EN 3155-080 : 2014 ; Aerospace series. Electrical contacts used in elements of connection. Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T. Product standard
EN 3155-081 : 2014 ; Aerospace series. Electrical contacts used in elements of connection. Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T. Product standard
EN 3155-082 : 2015 ; Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
EN 3155-083 : 2015 ; Aerospace series. Electrical contacts used in elements of connection. Contact, electrical, female, type A, crimp, class S, size 8 ; Product standard
EN 3160 : 2007 ; Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D $3L 200 mm, Rm $3M 1310 MPa.
EN 3161 : 2007 ; Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D $3L 200 mm, Rm $3M 930 MPa.
EN 3162 : 2007 ; Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, sheet and strip a $3L 6 mm, Rm $3M 930 MPa.
EN 3163 : 2007 ; Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, softened, forging stock a or D $3L 300 mm.
EN 3182 : 2012 ; Aerospace series. Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys. Dimensions and loads.
EN 3196 : 1994 ; Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3197 : 2010 ; Aerospace series. Design and installation of aircraft electrical and optical interconnection systems.
EN 3201 : 2008 ; Aerospace series. Holes for metric threaded fasteners. Design standard.
EN 3202 : 1995 ; Holes and traps for T-head bolts. Design standard.
EN 3212 : 1995 ; Paints and varnishes. Corrosion test by alternate immersion in a buffered sodium chloride solution.
EN 3218-001 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Technical specification
EN 3218-002 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Specification of performance and contact arrangements
EN 3218-005 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Plug with non-removable size 22 solder contacts. Product standard
EN 3218-006 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Receptacle with non-removable size 22 solder contacts. Product standard
EN 3218-007 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Plug with rear-removable size 20 crimp contacts. Product standard
EN 3218-008 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Receptacle with rear-removable size 20 crimp contacts. Product standard
EN 3218-009 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Protective covers for EN 3218-005 and EN 3218-007 connectors. Product standard
EN 3218-010 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Protective covers for EN 3218-006 and EN 3218-008 connectors. Product standard
EN 3218-011 : 2006 ; Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors. Product standard
EN 3226 : 2009 ; Aerospace series. Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated. Classification : 1100 MPa/235^DC.
EN 3227 : 2010 ; Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 3229 : 2009 ; Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread. Classification : 900 MPa (at ambient temperature)/235^DC.
EN 3236 : 1998 ; Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread.
EN 3237 : 1998 ; Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread.
EN 3238 : 2010 ; Aerospace series. Metallic materials. Test method. Shear test for wires and rivets.
EN 3239 : 1996 ; Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread. Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 3240 : 2007 ; Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3241 : 2008 ; Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-P A 92 HT (A 286), silver coated. Classification : 1100 MPa (at ambient temperature) / 425 ^DC.
EN 3264 : 2010 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Thrust wire nuts.
EN 3268 : 2014 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Pressure plugs.
EN 3274 : 2010 ; Aerospace series. Pipe coupling 8$0D30′. Thread end. Geometric configuration.
EN 3278 : 2012 ; Aerospace series. Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness).
EN 3280 : 1994 ; Bearings, airframe rolling, rigid or self-aligning. Technical specification.
EN 3280 : 2011 ; Aerospace series. Bearings, airframe rolling, rigid or self-aligning. Technical specification.
EN 3281 : 1994 ; Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 8 and 9 ; Dimensions and loads.
EN 3282 : 1994 ; Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 8 and 9 ; Dimensions and loads.
EN 3283 : 1994 ; Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9 ; Dimensions and loads.
EN 3284 : 1994 ; Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2 ; Normal clearance category. Dimensions and loads.
EN 3285 : 1994 ; Bearings ; airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2 ; Normal clearance category. Dimensions and loads.
EN 3286 : 1994 ; Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2 ; Normal clearance category. Dimensions and loads.
EN 3287 : 1994 ; Bearings, airframe rolling. Double row self-aligning ball bearings in steel. Diameter series 2 ; Dimensions and loads.
EN 3288 : 1994 ; Bearings, airframe rolling. Double row self-aligning ball bearings in steel, cadmium plated. Diameter series 2 ; Dimensions and loads.
EN 3289 : 1994 ; Bearings, airframe rolling. Double row self-aligning ball bearings in corrosion resisting steel. Diameter series 2 ; Dimensions and loads.
EN 3290 : 1994 ; Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Diameter series 3 and 4 ; Dimensions and loads.
EN 3291 : 1994 ; Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Diameter series 3 and 4 ; Dimensions and loads.
EN 3292 : 1994 ; Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Diameter series 3 and 4 ; Dimensions and loads.
EN 3293 : 2008 ; Aerospace series. Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification : 1275 MPa/650^DC.
EN 3294 : 2008 ; Aerospace series. Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts. Classification : 1210 MPa/730^DC.
EN 3297 : 1998 ; Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Technical specification.
EN 3298 : 1998 ; Inserts, thin wall, self-locking. Installation and removal procedure.
EN 3298 : 2008 ; Aerospace series. Inserts, thin wall, self-locking. Installation and removal procedure.
EN 3299 : 2007 ; Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification.
EN 3301 : 2007 ; Aerospace series. Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated. Classification : 1000 MPa/550^DC.
EN 3302 : 2007 ; Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification : 1000 MPa/550^DC. Technical specification.
EN 3303 : 1997 ; Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 3304 : 1997 ; Screws, 100$0D countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3305 : 1997 ; Screws, 100$0D countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 3306 : 1996 ; Screws, 100$0D countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS$d2 lubricated. Classification. 1100 MPa (at ambient temperature)/315^DC.
EN 3307 : 1997 ; Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3308 : 1996 ; Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS$d2 lubricated. Classification. 1100 MPa (at ambient temperature) /315^DC.
EN 3310 : 2011 ; Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Not heat treated. Forging stock, for annealed forgings. De $3L 360 mm.
EN 3311 : 2009 ; Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar for machining. D $0L 110 mm.
EN 3312 : 2012 ; Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De $3L 150 mm.
EN 3323 : 2009 ; Aerospace series. Bolts with double hexagon head, relieved shank, long thread, in heat resisting steel FE-PM 38 (FV 535). Classification : 1000 MPa/550 ^DC.
EN 3324 : 2007 ; Aerospace series. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535). Classification : 1000 MPa/550^DC. Unplated.
EN 3325 : 2007 ; Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535). Classification : 1000 MPa/550^DC. Unplated.
EN 3326 : 2007 ; Aerospace series. Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718). Classification : 1275 MPa/650^DC, unplated.
EN 3327 : 2008 ; Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification : 1275 MPa/650 ^DC.
EN 3328 : 2008 ; Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated. Classification : 1000 MPa/550 ^DC.
EN 3329 : 2009 ; Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm $3L a $3L 2 mm. For prevailing torque nuts.
EN 3330 : 2009 ; Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed. Bar and wire. De $3L 40 mm. For prevailing torque nuts.
EN 3332 : 2005 ; Aerospace series. Aluminium alloy AL-P7475-T762 ; Clad sheet and strip. 1,0 mm $3L a $3L 6 mm.
EN 3333 : 2005 ; Aluminium alloy AL-P7475-T762 ; Sheet and strip. 0,6 mm $3L a $3L 6 mm.
EN 3335 : 2005 ; Aluminium alloy AL-P7475-O2 ; Sheet for superplastic forming (SPF). 0,8 mm $3L a $3L 6 mm.
EN 3338 : 2005 ; Aerospace series. Aluminim alloy AL-P7050 ; T74511 ; Extruded bar and section. a or D $3L 150 mm with peripheral coarse grain control.
EN 3339 : 2006 ; Aerospace series. Aluminium alloy AL-P7010-T76 ; Die Forgings. a $3L 200 mm.
EN 3341 : 2005 ; Aluminium alloy AL-P6061-T4 or T42 ; Sheet and strip. 0,4 mm $3L a $3L 6 mm.
EN 3342 : 2005 ; Aerospace series. Aluminim alloy AL-P6061 ; T4 or T42 ; Drawn or extruded bar and section. a or D $3L 150 mm.
EN 3344 : 2005 ; Aerospace series. Aluminim alloy AL-P7050 ; T76511 ; Extruded bar and section. a or D $3l 150 mm with peripheral coarse grain control.
EN 3347 : 2005 ; Aerospace series. Aluminim alloy AL-P2024 ; T8511 ; Extruded bar and section. a or D $3L 150 mm with peripheral coarse grain control.
EN 3351 : 2012 ; Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De $3L 150 mm.
EN 3354 : 2013 ; Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a $3L 6 mm.
EN 3355 : 2012 ; Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Extruded section. De $3L 150 mm. 900 MPa $3L Rm $3L 1 160 MPa.
EN 3359 : 2007 ; Aerospace series. Steel FE-PM1503 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D $3L 300 mm.
EN 3361 : 2007 ; Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a $3L 6mm, 1070 MPa $3L Rm $3L 1220 MPa.
EN 3364 : 2007 ; Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, softened, forging stock a or D $3L 300 mm.
EN 3365 : 2007 ; Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted, softened, forging stock a or D $3L 300 mm.
EN 3368 : 2008 ; Aerospace series. Aerospace design standard. Holes for locating pins.
EN 3372-001 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Technical specification
EN 3372-002 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Specification of performance and contact arrangement
EN 3372-003 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Square flange receptacle. Product standard
EN 3372-005 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Receptacle, hermetic, round flange, solder mounting. Product standard
EN 3372-006 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Protective cover for receptacle. Product standard
EN 3372-007 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Protective cover for plug. Product standard
EN 3372-008 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Free plug with grounding spring. Product standard
EN 3372-009 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Receptacle, jam nut mounting. Product standard
EN 3372-011 : 2007 ; Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65^DC to 175^DC or 200^DC continuous. Dummy receptacle. Product standard
EN 3373-001 : 2007 ; Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Technical specification
EN 3373-002 : 2009 ; Aerospace series. Terminal lugs and in-line splices for crimping on electrical conductors. General and list of product standard
EN 3373-007 : 2012 ; Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard
EN 3373-008 : 2012 ; Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 ^DC. Product standard
EN 3373-010 : 2009 ; Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 ^DC for metric and inch stud series. Product standard
EN 3373-011 : 2009 ; Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 ^DC for metric and inch stud series. Product standard
EN 3373-012 : 2005 ; Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150^DC. Product standard
EN 3373-013 : 2005 ; Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260^DC. Product standard
EN 3373-014 : 2009 ; Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200^DC. Product standard
EN 3375-001 : 2007 ; Aerospace series. Cable, electrical, for digital data transmission. Technical specification
EN 3375-002 : 2012 ; Aerospace series. Cable, electrical, for digital data transmission. General
EN 3375-003 : 2007 ; Aerospace series. Cable, electrical, for digital data transmission. Single braid. 77 Ohms. Type KG. Product standard
EN 3375-004 : 2007 ; Aerospace series. Cable, electrical, for digital data transmission. Double braid. 77 Ohms. Type WJ. Product standard
EN 3375-005 : 2007 ; Aerospace series. Cable, electrical, for digital data transmission. Double braid + metallic layer. 77 Ohms. Type WV. Product standard
EN 3375-006 : 2006 ; Aerospace series. Cable, electrical, for digital data transmission. Single braid. 78 Ohms. Type XM. Product standard
EN 3375-007 : 2006 ; Aerospace series. Cable, electrical, for digital data transmission. Double braid. 77 Ohms. Type WW. Product standard
EN 3375-007 : 2016 ; Aerospace series. Cable, electrical, for digital data transmission. Double braid. 77 Ohms. Type WW. Product standard
EN 3375-008 : 2009 ; Aerospace series. Cable, electrical, for digital data transmission. Single braid. Star Quad 100 Ohms. Type KD. Product standard
EN 3375-009 : 2009 ; Aerospace series. Cable, electrical, for digital data transmission. Single braid. CAN Bus. 120 Ohms. Type WX. Product standard
EN 3375-009 : 2016 ; Aerospace series. Cable, electrical, for digital data transmission. Single braid. CAN Bus. 120 ohms. Type WX. Product standard
EN 3375-011 : 2015 ; Aerospace series. Cable, electrical, for digital data transmission. Single braid. Star Quad 100 ohms. Light weight. Type KL. Product standard
EN 3375-012 : 2013 ; Aerospace series. Cable, electrical, for digital data transmission. Single braid. Star Quad 100 ohms. 260^DC. Type KH. Product standard
EN 3377 : 1996 ; Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286). Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3379 : 1996 ; Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature)/730^DC.
EN 3381 : 1997 ; Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature) /315^DC.
EN 3382 : 2012 ; Aerospace series. Rings retaining, internal, axial mounting, steel, phosphated.
EN 3383 : 2012 ; Aerospace series. Rings retaining, internal, axial mounting,steel, vacuum cadmium plated.
EN 3384 : 2012 ; Aerospace series. Rings retaining, external, axial mounting,steel, phosphated.
EN 3385 : 2012 ; Aerospace series. Rings retaining, external, axial mounting, steel, vacuum cadmium plated.
EN 3386 : 2012 ; Aerospace series. Rings retaining, radial mounting, steel, phosphated.
EN 3388 : 2009 ; Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification 1275 MPa/650^DC. Manufacturing method optional. Technical specification.
EN 3389 : 2009 ; Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification : 1210 MPa/730^DC. Manufacturing method optional. Technical specification.
EN 3417 : 2012 ; Aerospace series. Rivets, solid, universal head, in nickel base alloy NI-P11, metric series.
EN 3425 : 2006 ; Aerospace series. Groove dimensions for axial mounting internal type retaining rings.
EN 3426 : 2006 ; Aerospace series. Groove dimensions for axial mounting external type retaining rings.
EN 3427 : 2006 ; Aerospace series. Groove dimensions for radial mounting retaining rings.
EN 3431 : 2007 ; Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3444 : 2006 ; Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification : 1250 MPa (at ambient temperature) / 650^DC.
EN 3446 : 1995 ; Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads.
EN 3456 : 2009 ; Aerospace series. Titanium alloy TIP64001 (Ti-6Al-4V). Annealed. Sheet and strip, hot rolled. a 3L 6 mm.
EN 3456 : 2012 ; Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Sheet and strip, hot rolled. a $3L 6 mm.
EN 3459 : 2010 ; Aerospace series. Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn). Solution treated and aged. Plate. 6 mm $0L a $3L 50 mm.
EN 3464 : 2009 ; Aerospace series. Titanium alloy TI-P64001 (Ti-6AI-4V). Annealed. Plate. 6 mm $0L a $3L 100 m.
EN 3464 : 2012 ; Aerospace series. Titanium alloy (Ti-6Al-4V). Annealed. Plate. 6 mm $0L a $3L 100 mm.
EN 3469 : 2009 ; Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 200 mm. Rm $3M 1310 MPa.
EN 3474 : 2005 ; Aerospace series. Aluminium alloy AL-P2024-T81 ; Sheet and strip. 0,25 mm $3l a $3L 6 mm.
EN 3475-100 : 2010 ; Aerospace series. Cables, electrical, aircraft use. Test methods. General
EN 3475-203 : 2006 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Dimensions
EN 3475-302 : 2006 ; Aerospace series. Cable, electrical, aircraft use. Test methods. Voltage proof test
EN 3475-306 : 2005 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Continuity of conductors
EN 3475-307 : 2005 ; Cables, electrical, aircraft use. Test methods. Corona extinction voltage
EN 3475-307 : 2010 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Corona extinction voltage
EN 3475-307 : 2015 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Corona extinction voltage
EN 3475-407 : 2005 ; Aerospace series. Cable, electrical, aircraft use. Test methods. Flammability
EN 3475-407 : 2009 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Flammability
EN 3475-408 : 2005 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Fire resistance
EN 3475-411 : 2005 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to fluids
EN 3475-411 : 2014 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to fluids
EN 3475-414 : 2005 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
EN 3475-415 : 2005 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Rapid change of temperature
EN 3475-416 : 2005 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Thermal stability
EN 3475-417 : 2009 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Fire resistance of cables confined inside a harness
EN 3475-418 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Thermal endurance for conductors
EN 3475-501 : 2006 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Dynamic cut-through
EN 3475-505 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands
EN 3475-505 : 2012 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands
EN 3475-506 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Plating continuity
EN 3475-507 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Adherence of plating
EN 3475-508 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Plating thickness
EN 3475-513 : 2005 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Deformation resistance (installation with plastic cable ties)
EN 3475-514 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Porosity of copper cladding on aluminium strands
EN 3475-514 : 2014 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Porosity of copper cladding on aluminium strands
EN 3475-515 : 2009 ; Aerospace series. Cable, electrical, aircraft use. Test methods. Crush resistance
EN 3475-601 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Smoke density
EN 3475-602 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Toxicity
EN 3475-603 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to wet arc tracking
EN 3475-603 : 2011 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to wet arc tracking
EN 3475-604 : 2010 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to dry arc propagation
EN 3475-605 : 2010 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Wet short circuit test
EN 3475-704 : 2007 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Flexibility
EN 3475-705 : 2005 ; Aerospace series. Cable, electrical, aircraft use. Test methods. Contrast measurement
EN 3475-706 : 2005 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Laser markability
EN 3475-802 : 2009 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance unbalance
EN 3475-809 : 2009 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance unbalance
EN 3475-810 : 2009 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Structural return loss
EN 3475-811 : 2009 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Unbalance attenuation
EN 3475-812 : 2009 ; Aerospace series. Cables, electrical, aircraft use. Test methods. Return loss (VSWR)
EN 3476 : 2006 ; Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D $3L 300 mm.
EN 3479 : 2007 ; Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Plate. 6 mm $0L a $3L 20 mm. 1070 MPa $3L Rm $3L 1220 MPa.
EN 3480 : 2007 ; Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Plate. 6 mm $0L a $3L 50 mm. 500 MPa $3L Rm $3L 700 MPa.
EN 3487 : 2007 ; Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Bar for machining. a or D $3L 250 mm. 500 MPa $3L Rm $3L 700 MPa.
EN 3488 : 2007 ; Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Sheet and strip. a $3L 6 mm. 500 MPa $3L Rm $3L 700 MPa.
EN 3490 : 2007 ; Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Bar for machining. De $3L 200 mm. 900 MPa $3L Rm $3L 1100 MPa.
EN 3491 : 2006 ; Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Forgings. De $3L 100 mm. 900 MPa $3L Rm $3L 1100 MPa.
EN 3507 : 2006 ; Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Hardened and tempered. Forgings. De $3L 100 mm. 930 MPa $3L Rm $3L 1080 MPa.
EN 3523 : 2007 ; Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bar for machining. De $3L 100 mm. 1080 MPa $3L Rm $3L 1280 MPa.
EN 3524 : 2007 ; Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 2 mm $3L a $3L 6 mm. 1080 MPa $3L Rm $3L1280 MPa.
EN 3525 : 2007 ; Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Plate. 6 mm $3Q a $3L 20 mm. 1080 MPa $3L Rm $3L 1280 MPa.
EN 3526 : 2007 ; Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm $3L a $3L 6 mm. 980 MPa $3L Rm $3L 1180 MPa.
EN 3527 : 2007 ; Aerospace series. Steel FE-PL1504 (33CrMoV12). Air melted. Softened. Forging stock. a or D $3L 300 mm.
EN 3528 : 2013 ; Aerospace series. Steel X2NiCoMo18-8-5 (1;6359). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D $3L 150 mm. 1 750 MPa $3L Rm $3L 2 000 MPa.
EN 3529 : 2010 ; Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Forgings. a or D $3L 150 mm. 1750 MPa $3L Rm $3L 2000 MPa.
EN 3531 : 2007 ; Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Sheet and strip. a $3L 6 mm. 1750 MPa $3L Rm $3L 2000 MPa.
EN 3532 : 2007 ; Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5).Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated.Plate. 6 mm $0L a $3L 40 mm. 1750 MPa $3L Rm $3L 2000 MPa.
EN 3536 : 2006 ; Aerospace series. Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3537 : 2010 ; Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3538 : 2010 ; Aerospace series. Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3539 : 2010 ; Aerospace series. Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3541 : 1992 ; Rod ends, adjustable, self-aligning ball bearing with threaded shank. Dimensions, torques, clearances and loads.
EN 3542 : 1998 ; Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750).
EN 3543 : 1997 ; Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3545-001 : 2005 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -5 ^DC to 175 ^DC. Technical specification
EN 3545-001 : 2008 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55^DC to 175^DC. Technical specification
EN 3545-002 : 2005 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures – 55^DC to 175^DC. Specification of performance and contact arrangements
EN 3545-002 : 2008 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ^DC to 175 ^DC . Specification of performance and contact arrangements
EN 3545-003 : 2005 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ^DC to 175 ^DC. Connectors with female contacts. Product standard
EN 3545-004 : 2005 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ^DC to 175 ^DC. Connectors with male contacts. Product standard
EN 3545-005 : 2006 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55^DC to 175^DC. Male coding and attachment system for mounting on free housing (plug). Product standard
EN 3545-005 : 2014 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ^DC to 175 ^DC. Female coding and attachment System for mounting on free housing (plug). Product standard
EN 3545-006 : 2006 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55^DC to 175^DC. Male coding and attachment system for fitment on fixed housing (receptacle). Product standard
EN 3545-006 : 2015 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55^DC to 175^DC. Male coding and attachment. System for mounting on fixed housing (receptacle). Product standard
EN 3545-007 : 2005 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ^DC to 175 ^DC. Cable clamp. Product standard
EN 3545-007 : 2014 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures – 55 ^DC to 175 ^DC. Cable clamp. Product standard
EN 3545-008 : 2006 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55^DC to 175^DC. Tools for assembly/removal of coding and attachment systems. Product standard
EN 3545-009 : 2008 ; Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C. Protective cover for plug and receptacle. Product standard
EN 3552 : 2005 ; Aerospace series. Aluminium alloy AL-P2618A-T6 or T62 ; Clad sheet and strip. 0,4 mm $3L a $3L 6 mm.
EN 3553 : 2004 ; Aerospace series. Aluminium alloy AL-P2618A-T6511 ; Extruded bar and section. a or D $3L 160 mm.
EN 3611 : 1995 ; Spigots. Dimensions and fit selection. Design standard.
EN 3613 : 2009 ; Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated. Classification : 1275 MPa/650 ^DC.
EN 3614 : 2009 ; Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated. Classification : 900 MPa/650^DC.
EN 3626 : 2006 ; Aerospace series. Nuts, hexagon, self-locking in steel, cadmium plated, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature) / 235^DC.
EN 3630 : 2008 ; Aerospace series. Fluid fittings, flanged, straight. Sealing by O-ring for 0,8 mm thick tubes.
EN 3631 : 2008 ; Aerospace series. Fluid fittings, flanged, 90$0D elbowed. Sealing by O-ring for 0,8 mm thick tubes.
EN 3631 : 2014 ; Aerospace series. Fluid fittings, flanged, 90$0D elbowed. Sealing by O-ring for 0,8 mm thick tubes.
EN 3633 : 2008 ; Aerospace series. Installation hole for fluid fittings, flanged.
EN 3635 : 2008 ; Aerospace series. Weld lip. Geometrical configuration.
EN 3635 : 2014 ; Aerospace series. Weld lip. Geometrical configuration.
EN 3636 : 2008 ; Aerospace series. Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification : 900 MPa/650^DC.
EN 3637 : 2008 ; Aerospace series. Nuts, self-locking, bihexagonal (double reduced), in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, Classification : 1210 MPa/730 ^DC.
EN 3638 : 2007 ; Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Consumable electrode remelted. Solution and precipitation treated. Sheet, strip and plate. 0,5 mm $3L a $3L 10 mm.
EN 3642 : 1997 ; Rivets, solid, 100$0D countersunk normal head, with dome, in titanium TI-PO2, anodized, inch based series.
EN 3643 : 1997 ; Rivets, solid, 100$0D countersunk normal head, in titanium TI-PO2, anodized, inch based series.
EN 3644 : 1997 ; Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series.
EN 3645-001 : 2007 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Technical specification
EN 3645-001 : 2013 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Technical specification
EN 3645-001 : 2015 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Technical specification
EN 3645-002 : 2007 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Specification of performance and contact arrangements
EN 3645-002 : 2015 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Specification of performance and contact arrangements
EN 3645-003 : 2006 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Receptacle square flange mounting. Product standard
EN 3645-003 : 2015 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 ^DC or 200 ^DC continuous. Receptacle square flange mounting. Product standard
EN 3645-004 : 2006 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, hermetic, square flange mounting. Product standard
EN 3645-005 : 2006 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, hermetic, round flange, brasage mounting. Product standard
EN 3645-006 : 2006 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Protective cover for receptacle. Product standard
EN 3645-006 : 2015 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Protective cover for receptacle. Product standard
EN 3645-007 : 2007 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Protective cover for plug. Product standard
EN 3645-007 : 2015 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 ^DC or 200 ^DC continuous. Protective cover for plug. Product standard
EN 3645-008 : 2007 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Non release plug with grounding ring. Product standard
EN 3645-008 : 2015 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 ^DC or 200 ^DC continuous. Non release plug with grounding ring. Product standard
EN 3645-009 : 2006 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, round flange, jam nut mounting. Product standard
EN 3645-010 : 2006 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, hermetic, round flange, jam nut mounting. Product standard
EN 3645-011 : 2006 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Lanyard release plug with grounding fingers. Type 1 ; Product standard
EN 3645-012 : 2006 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Lanyard release plug with grounding fingers. Type 2 ; Product standard
EN 3645-013 : 2007 ; Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175^DC or 200^DC continuous. Dummy receptacle. Product standard
EN 3646-001 : 2007 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Technical specification
EN 3646-001 : 2015 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 ^DC or 200 ^DC continuous. Technical specification
EN 3646-002 : 2007 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Specification of performance and contact arrangements
EN 3646-003 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, square flange mounting. Product standard
EN 3646-004 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, jam-nut mounting. Product standard
EN 3646-004 : 2013 ; Aerospace series. Connectors, electrical, circular, bayonet coupling,operating temperature 175^DC or 200^DC continuous. Receptacle, jam-nut mounting. Product standard
EN 3646-004 : 2015 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 ^DC or 200 ^DC continuous. Receptacle, jam-nut mounting. Product standard
EN 3646-005 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, hermetic, square flange mounting. Product standard
EN 3646-006 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, hermetic jam-nut mounting. Product standard
EN 3646-007 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Receptacle, hermetic, round flange, welding or brazing mounting. Product standard
EN 3646-007 : 2015 ; Aerospace series. Connectors, electrical, circular bayonet coupling, ope rating temperature 175^DC or 200^DC continuous. Receptacle, hermetic, round flange, welding or brazing mounting. Product standard
EN 3646-008 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Plug. Product standard
EN 3646-009 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Protective cover for receptacle. Product standard
EN 3646-009 : 2015 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Protective cover for receptacle. Product standard
EN 3646-010 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling. Operating temperature 175^DC or 200^DC continuous duty. Protective cover for plug. Product standard
EN 3646-010 : 2015 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Protective cover for plug. Product standard
EN 3646-011 : 2006 ; Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175^DC or 200^DC continuous. Dummy receptacle. Product standard
EN 3658 : 2008 ; Aerospace series. Tube bend radii, for engine application. Design standard.
EN 3660-001 : 2006 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Technical specification
EN 3660-001 : 2016 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Technical specification
EN 3660-002 : 2006 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Index of product standards
EN 3660-002 : 2016 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Index of product standards
EN 3660-003 : 2006 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Grommet nut, style A for EN 2997 and EN 4067 ; Product standard
EN 3660-003 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Grommet nut, style A for EN 2997 and EN 4067 ; Product standard
EN 3660-004 : 2006 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 ; Product standard
EN 3660-004 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 ; Product standard
EN 3660-005 : 2006 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90$0D, unsealed with clamp strain relief for EN 2997 and EN 4067 ; Product standard
EN 3660-005 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90$0D, unsealed with clamp strain relief for EN 2997 and EN 4067 ; Product standard
EN 3660-006 : 2010 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, self-locking, style C, straight, shielded (cone grounding), unsealed with clamp strain relief. Product standard
EN 3660-007 : 2010 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, self-locking, style C, 90$0D, shielded (cone grounding), unsealed with clamp strain relief. Product standard
EN 3660-008 : 2010 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, self-locking, style C, 45$0D, shielded (cone grounding), unsealed with clamp strain relief. Product standard
EN 3660-009 : 2007 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style J, straight, sealed, for heat shrinkable boot. Product standard
EN 3660-010 : 2010 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot. Product standard
EN 3660-011 : 2010 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, 90$0D, shielded, sealed, for heat shrinkable boot. Product standard
EN 3660-012 : 2008 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Grommet nut, style A for EN 3372 ; Product standard
EN 3660-013 : 2008 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard
EN 3660-014 : 2008 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90$0D, unsealed, with cable tie strain relief. Product standard
EN 3660-015 : 2008 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 45$0D, unsealed, with cable tie strain relief. Product standard
EN 3660-016 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Grommet nut, style A, self-locking and non self-locking for EN 3645 ; Product standard
EN 3660-017 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard
EN 3660-018 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90$0D, unsealed, with cable tie strain relief. Product standard
EN 3660-019 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 45$0D, unsealed, with cable tie strain relief. Product standard
EN 3660-020 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN 3645 ; Product standard
EN 3660-021 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90$0D, unsealed, self-locking with clamp strain relief for EN 3645 ; Product standard
EN 3660-022 : 2008 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, composite, unsealed, with cable tie strain relief. Product standard
EN 3660-023 : 2008 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90$0D, composite, unsealed, with cable tie strain relief. Product standard
EN 3660-024 : 2008 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Grommet nut, style A, composite. Product standard
EN 3660-025 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 ; Product standard
EN 3660-025 : 2013 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 ; Product standard
EN 3660-026 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90$0D, unsealed, with cable tie strain relief for EN 3646 ; Product standard
EN 3660-027 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 45$0D, unsealed, with cable tie strain relief for EN 3646 ; Product standard
EN 3660-027 : 2013 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 45$0D, unsealed, with cable tie strain relief for EN 3646 ; Product standard
EN 3660-036 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Spacer pad for cable outlet, style Z. Product standard
EN 3660-037 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Bushing strip, elastomer, for cable outlet, style Z. Product standard
EN 3660-038 : 2013 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Manual installation tool, style Z, for installation of stainless steel shield termination band EN 3660-033, to cable outlet accessories. Product standard
EN 3660-062 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, 90^DC, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 ; Product standard
EN 3660-062 : 2016 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, 90$0D, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 ; Product standard
EN 3660-063 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 ; Product standard
EN 3660-063 : 2015 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 ; Product standard
EN 3660-064 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 and EN 4067 ; Product standard
EN 3660-064 : 2016 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 ; Product standard
EN 3660-065 : 2009 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, 90$0D, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 and EN 4067 ; Product standard
EN 3660-065 : 2016 ; Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, 90$0D, for heat shrinkable boot, shielded, sealed, self locking. Product standard
EN 3661-001 : 2006 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. Technical specification
EN 3661-005 : 2006 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Product standard
EN 3661-006 : 2006 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Bus bar version. Product standard
EN 3662-001 : 2006 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current from 20 A to 50 A. Technical specification
EN 3662-005 : 2006 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Product standard
EN 3662-006 : 2006 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Bus-bar version. Product standard
EN 3665 : 1997 ; Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys.
EN 3668 : 2006 ; Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D $3L 250 mm.
EN 3671 : 2007 ; Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D $3L 250 mm.
EN 3672 : 2008 ; Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30$0D swage. Classification : 1210 MPa (at ambient temperature)/730 ^DC.
EN 3676 : 1998 ; Inserts, thin wall, self-locking. Design standard.
EN 3677 : 2007 ; Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D $3L 200 mm. Rm $3M 1310 MPa.
EN 3678 : 2007 ; Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D $3L 200 mm. Rm $3M 930 MPa.
EN 3682-001 : 2006 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Technical specification
EN 3682-001 : 2013 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Technical specification
EN 3682-002 : 2006 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Specification of performance and contact arrangements
EN 3682-002 : 2013 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Specification of performance and contact arrangements
EN 3682-003 : 2006 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Inserts. Product standard
EN 3682-003 : 2012 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Inserts. Product standard
EN 3682-004 : 2006 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 2 receptacle. Product standard
EN 3682-004 : 2012 ; Aerospace series. Connectors, plug and receptacle, electrical, rect angular, interchangeable insert type, rack to panel, operatingtemperatur e 150^DC continuous. Size 2 receptacle. Product standard
EN 3682-005 : 2006 ; Aerospace Series. Connectors, plug and receptacle, electrical,rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 2 plug. Product standard
EN 3682-005 : 2013 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 2 plug. Product standard
EN 3682-006 : 2006 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 3 receptacle. Product standard
EN 3682-006 : 2013 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 3 receptacle. Product standard
EN 3682-007 : 2006 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 3 plug. Product standard
EN 3682-007 : 2013 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 3 plug. Product standard
EN 3682-008 : 2006 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 4 receptacle. Product standard
EN 3682-008 : 2013 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 4 receptacle. Product standard
EN 3682-009 : 2006 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 4 plug. Product standard
EN 3682-009 : 2013 ; Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150^DC continuous. Size 4 plug. Product standard
EN 3683 : 2007 ; Aerospace series. Test methods. Titanium alloy wrought products. Determination of primary $Ga content. Point count method and line intercept method.
EN 3684 : 2007 ; Aerospace series. Test methods. Titanium alloy wrought products. Determination of $Gb transus temperature. Metallographic method.
EN 3685 : 2008 ; Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification : 1100 MPa/650 °C. Technical specification.
EN 3686 : 2008 ; Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification : 1100 MPa/650^DC.
EN 3687 : 2010 ; Aerospace series. Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated.Classifi cation : 1100 MPa/650 ^DC.
EN 3697 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 60 IRHD.
EN 3698 : 2013 ; Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD.
EN 3706 : 2012 ; Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086 ;
EN 3707 : 2012 ; Aerospace series. Headless threaded plugs. Installation holes.
EN 3708-001 : 2006 ; Aerospace series. Modular interconnection systems. Terminal junction systems. Technical specification
EN 3708-002 : 2006 ; Aerospace series. Modular interconnection systems. Terminal junction systems. Performance specification
EN 3708-003 : 2006 ; Aerospace series. Modular interconnection systems. Terminal junction systems. Removable feedback modules version, sealed. Product standard
EN 3708-004 : 2006 ; Aerospace series. Modular interconnection systems. Terminal junction systems. Removable feedback modules version, unsealed. Product standard
EN 3708-005 : 2006 ; Aerospace series. Modular interconnection systems. Terminal junction systems. Frames with accessories for feedback modules version, sealed and unsealed. Product standard
EN 3709 : 2006 ; Aerospace series. Wrenches and sockets, bi-hexagonal. Technical specification.
EN 3710 : 2008 ; Aerospace series. Sockets, bi-hexagonal. Technical specification.
EN 3711 : 2008 ; Aerospace series. Wrench-double ended, bi-hexagonal. Straight, cranked, offset.
EN 3712 : 2007 ; Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2, lubricated. Classification : 1100 MPa (at ambient temperature)/235 ^DC.
EN 3716-001 : 2006 ; Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data. Technical specification
EN 3716-002 : 2006 ; Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data. Conditions of use and list of product standards
EN 3716-003 : 2006 ; Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data. Solder receptacle. Product standard
EN 3716-004 : 2006 ; Aerospace series. Connectors, single-way with triaxial interface, for transmission of digital data. Solder plug. Product standard
EN 3716-004 : 2014 ; Aerospace series. Connectors, single-way with triaxial interface for transmission of digital data. Solder plug and terminator. Product standard
EN 3716-005 : 2006 ; Aerospace series. Connector, single-way with triaxial interface, for transmission of digital data. Crimp receptacle. Product standard
EN 3716-006 : 2006 ; Aerospace series. Connector, single-way with triaxial interface, for transmission of digital data. Crimp plug. Product standard
EN 3717 : 2008 ; Aerospace series. Tubes. Selection for engines fluid systems.
EN 3718 : 2012 ; Aerospace series. Test method for metallic materials. Ultrasonic inspection of tubes.
EN 3719 : 2005 ; Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard.
EN 3719 : 2010 ; Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard.
EN 3720 : 1995 ; Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS$d2 coated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3721 : 1995 ; Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A 286), MoS$d2 coated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3722 : 1995 ; Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoS$d2 coated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3723 : 1996 ; Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS$d2 coated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3725 : 2004 ; Aerospace series. Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS$d2 coated. Strength class : 1100 MPa (at ambient temperature).
EN 3726 : 2004 ; Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS$d2 coated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3727 : 2006 ; Aerospace series. Bearings, airframe rolling rigid with flanged alignment housing. Technical specification.
EN 3728 : 2008 ; Aerospace series. Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated.
EN 3729 : 2008 ; Aerospace series. Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated.
EN 3730 : 2009 ; Aerospace series. Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning. Dimension, masses.
EN 3733-001 : 2009 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous. Technical specification
EN 3733-002 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150^DC continuous. List of product standards
EN 3733-003 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150^DC continuous. Plug connector for cable according to EN 4532, product standard
EN 3733-004 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ^DC continuous. Receptacle, connector, four hole fixing cable according to EN 4532, product standard
EN 3733-005 : 2007 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous. Receptacle, connector, two hole fixing for cable according to EN 4532, product standard
EN 3733-006 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ^DC continuous. Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard
EN 3733-007 : 2007 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous. Ferrule (optical contact) for EN 4532 (200 µm/280 µm fibre). Product standard
EN 3733-008 : 2006 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous . Plug sub-assembly for cable to EN 4532 (200 µm/280 µm fibre). Product standard
EN 3733-009 : 2006 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous. Receptacle sub-assembly for cable to EN 4532 (200 µm/280 µm fibre). Product standard
EN 3733-101 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ^DC continuous . Protective cover receptacle. Product standard
EN 3733-103 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous. Protective cover jam nut receptacle. Product standard
EN 3733-104 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous. Receptacle connector dummy four holes fixing. Product standard
EN 3733-105 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous. Receptacle connector dummy two holes fixing. Product standard
EN 3733-106 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous. Receptacle connector dummy jam nut. Product standard
EN 3733-108 : 2008 ; Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150^DC continuous. Cable support boot. Product standard
EN 3740 : 1997 ; Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3741 : 2004 ; Aerospace series. Nuts, clip, metric. Installation holes and assembly.
EN 3745-100 : 2008 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. General
EN 3745-202 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Fibre dimensions
EN 3745-203 : 2008 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable dimensions
EN 3745-301 : 2012 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Attenuation
EN 3745-303 : 2007 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Bandwidth
EN 3745-306 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Variation of attenuation during temperature cycling
EN 3745-401 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Accelerated ageing
EN 3745-402 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Temperature cycling
EN 3745-404 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Thermal shock
EN 3745-405 : 2012 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Low/high temperature bend test
EN 3745-406 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cold bend test
EN 3745-407 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Flammability
EN 3745-410 : 2007 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Thermal life
EN 3745-410 : 2015 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Thermal life
EN 3745-411 : 2007 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Resistance to fluids
EN 3745-412 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Humidity resistance
EN 3745-501 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Optical fibre proof test
EN 3745-502 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Tensile strength for short length of optical fibres
EN 3745-503 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Scrape abrasion
EN 3745-505 : 2007 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable tension strength
EN 3745-506 : 2009 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Impact resistance
EN 3745-510 : 2012 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Bending test
EN 3745-512 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Flexure endurance
EN 3745-513 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Crush resistance
EN 3745-514 : 2009 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable twist bend
EN 3745-515 : 2012 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Buffer insertion force
EN 3745-516 : 2012 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Severe cable bend test
EN 3745-517 : 2012 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable tie clamping test
EN 3745-601 : 2007 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Smoke density
EN 3745-602 : 2008 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Toxicity
EN 3745-603 : 2008 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Nuclear radiation
EN 3745-703 : 2005 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Durability of manufacturer’s marking
EN 3745-705 : 2007 ; Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Contrast measurement
EN 3746 : 2007 ; Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD.
EN 3747 : 2007 ; Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification.
EN 3752 : 2004 ; Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS$d2 coated. Classification : 1100 MPa (at ambient temperature) / 425^DC. Technical specification.
EN 3753 : 2010 ; Aerospace series. Nuts, anchor, self-locking, fixed, 60$0D corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 3757 : 2009 ; Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lugs, in heat resisting steel, MoS2 lubricated. Classification : 900 MPa (at ambient temperature)/315^DC.
EN 3759 : 1997 ; Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3760 : 1997 ; Screws, 100$0D countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 3768 : 2012 ; Aerospace series. Nuts. anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2lubricated. Classification : 1 100 MPa (at ambient temperature)/315 ^DC.
EN 3773-001 : 1999 ; Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 $iI$dn/1000 A max. Technical specification
EN 3773-001 : 2014 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A. Technical specification
EN 3773-003 : 1999 ; Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 $iI$dn/1000 A max. Metric thread terminals. Product standard
EN 3773-004 : 1999 ; Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 $iI$dn/1000 A max. UNC thread terminals. Product standard
EN 3773-004 : 2014 ; Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A. UNC thread terminals. Product standard
EN 3774-001 : 1999 ; Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In. Technical specification
EN 3774-001 : 2014 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A. Technical specification
EN 3774-003 : 1999 ; Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In. Metric thread terminals. Product standard
EN 3774-004 : 1999 ; Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In. UNC thread terminals. Product standard
EN 3774-004 : 2014 ; Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A. UNC thread terminals. Product standard
EN 3777 : 2010 ; Aerospace series. Pins, quick release, single and double acting. Technical specification.
EN 3781 : 2008 ; Aerospace series. Grooves for spiral wound retaining rings. Design standard.
EN 3782 : 2008 ; Aerospace series. Holes for 100$0D countersunk head screws. Design standard.
EN 3783 : 2013 ; Aerospace series. Fibre composite materials. Normalisation of fibre dominated mechanical properties.
EN 3813 : 2013 ; Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. D$de $3L 50 mm.
EN 3816 : 2006 ; Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened and cold rolled. Sheet and strip. a $3L 3 mm. Rm $3M 800 MPa.
EN 3818 : 2004 ; Aerospace series. Bolts, MJ threads, in titanium alloy TI-P64001 ; Strength class : 1100 MPa (at ambient temperature). Technical specification.
EN 3819 : 2008 ; Aerospace series. Clearance for wrenches and sockets.
EN 3820 : 2006 ; Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 3825 : 2014 ; Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 60 IRHD.
EN 3826 : 2014 ; Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 70 IRHD.
EN 3827 : 2014 ; Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 80 IRHD.
EN 3831 : 2004 ; Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS$d2 coated.
EN 3832 : 2004 ; Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification : 1550 MPa (at ambient temperature) / 650^DC.
EN 3833 : 2004 ; Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification : 1550 MPa (at ambient temperature) / 650^DC. Technical specification.
EN 3838 : 2010 ; Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables.
EN 3840 : 2007 ; Aerospace series. Paints and varnishes. Technical specification.
EN 3841-100 : 2004 ; Aerospace series. Circuit breakers. Test methods. General
EN 3841-201 : 2004 ; Aerospace series. Circuit breakers. Test methods. Visual inspection
EN 3841-202 : 2004 ; Aerospace series. Circuit breakers. Test methods. Dimensions and masses
EN 3841-301 : 2004 ; Aerospace series. Circuit breakers. Test methods. Voltage drop
EN 3841-302 : 2004 ; Aerospace series. Circuit breakers. Test methods. Insulation resistance
EN 3841-303 : 2004 ; Aerospace series. Circuit breakers. Test methods. Dielectric strength
EN 3841-304 : 2004 ; Aerospace series. Circuit breakers. Test methods. Tripping points
EN 3841-305 : 2004 ; Aerospace series. Circuit breakers. Test methods. Short-circuit performance
EN 3841-306 : 2004 ; Aerospace series. Circuit breakers. Test methods. Service life
EN 3841-307 : 2004 ; Aerospace series. Circuit breakers. Test methods. Performance with a locked tripping system
EN 3841-308 : 2004 ; Aerospace series. Circuit breakers. Test methods. Lightning
EN 3841-401 : 2004 ; Aerospace series. Circuit breakers. Test methods. Sand and dust
EN 3841-402 : 2004 ; Aerospace series. Circuit breakers. Test methods. Corrosion
EN 3841-404 : 2004 ; Aerospace series. Circuit breakers. Test methods. Explosion proofness
EN 3841-405 : 2004 ; Aerospace series. Circuit breakers. Test methods. Fluid resistance
EN 3841-406 : 2004 ; Aerospace series. Circuit breakers. Test methods. Flammability
EN 3841-407 : 2004 ; Aerospace series. Circuit breakers. Test methods. Temperature variation
EN 3841-501 : 2004 ; Aerospace series. Circuit breakers. Test methods. Actuator button travel
EN 3841-503 : 2004 ; Aerospace series. Circuit breakers. Test methods. Strength of actuating components
EN 3841-504 : 2004 ; Aerospace series. Circuit breakers. Test methods. Strength of mounting elements
EN 3841-505 : 2004 ; Aerospace series. Circuit breakers. Test methods. Strength of main terminals
EN 3841-506 : 2004 ; Aerospace series. Circuit breakers. Test methods. Vibration performance
EN 3841-507 : 2004 ; Aerospace series. Circuit breakers. Test methods. Mechanical shocks
EN 3841-508 : 2004 ; Aerospace series. Circuit breakers. Test methods. Centrifugal acceleration
EN 3841-509 : 2004 ; Aerospace series. Circuit breakers. Test methods. Insertion and extraction forces of signal contact terminals
EN 3841-510 : 2004 ; Aerospace series. Circuit breakers. Test methods. Strength of signal contact terminals
EN 3841-511 : 2004 ; Aerospace series. Circuit breakers. Test methods. Combined test : temperature, altitude and vibration
EN 3843 : 2010 ; Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated. Classification : 1100 MPa (at ambient temperature)/650^DC.
EN 3844-1 : 2011 ; Aerospace series. Flammability of non metallic materials. Small burner test, vertical. Determination of the vertical flame propagation
EN 3844-2 : 2011 ; Aerospace series. Flammability of non metallic materials. Small burner test, horizontal. Determination of the horizontal flame propagation
EN 3844-3 : 2011 ; Aerospace series. Flammability of non metallic materials. Small burner test, 45$0D. Determination of the resistance of material to flame and glow propagation and to flame penetration
EN 3861 : 2013 ; Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Thermally tempered soda lime float glass.
EN 3862 : 2013 ; Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Chemically tempered soda lime float glass.
EN 3863 : 2013 ; Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of flatness.
EN 3864 : 2013 ; Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of modulus of rupture.
EN 3866 : 2013 ; Aerospace series. Non-metallic materials. Glass tranparencies. Test methods. Determination of ream and surface ripple.
EN 3867 : 2004 ; Aerospace series. Pipe couplings, loose flanges and seals. Flanges in titanium alloy TI-P64001 ;
EN 3868 : 2004 ; Aerospace series. Pipe couplings, loose flanges and seals. Flange connectors, welded, in titanium alloy TI-P64001 ;
EN 3872 : 2005 ; Aerospace series. Aluminium alloy AL-R39002-H112 ; Die forgings. a $3L 200mm.
EN 3873 : 2010 ; Aerospace series. Test methods for metallic materials. Determination of fatigue crack growth rates using corner-cracked (CC) test pieces.
EN 3905 : 2008 ; Aerospace series. Six lobe recesses for bolts. Technical specification.
EN 3907 : 2004 ; Aerospace series. Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS$d2 coated. Classification : 1100MPa (at ambient temperature)/350^DC.
EN 3909 : 2007 ; Aerospace series. Test fluids and test methods for electric components and sub-assemblies.
EN 3909 : 2016 ; Aerospace series. Test fluids and test methods for electrical and optical components and sub-assemblies.
EN 3911 : 2010 ; Aerospace series. Six lobe recess. Geometrical definition.
EN 3912 : 2007 ; Aerospace series. Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated. Classification : 1100 MPa (at ambient temperature) / 650^DC.
EN 3913 : 2007 ; Aerospace series. Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components.
EN 3914 : 2008 ; Aerospace series. Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components.
EN 3915 : 2008 ; Aerospace series. Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components. Classification : 1275 MPa (at ambient temperature) / 550^DC. Technical specification.
EN 3916 : 2008 ; Aerospace series. Insert, thin wall. Salvage procedure for components.
EN 3917 : 1998 ; Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Powder or paste.
EN 3918 : 1998 ; Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Tape.
EN 3919 : 1998 ; Nickel base alloy NI-B41202 (NiCr14Si5B3). Filler metal for brazing. Amorphous foil.
EN 3920 : 2001 ; Aerospace series. Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3). Filler metal for brazing. Powder or paste.
EN 3921 : 2001 ; Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Amorphous foil.
EN 3922 : 1998 ; Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Borided foil.
EN 3923 : 2001 ; Aerospace series. Nickel base alloy NI – B41203 (NiCr7Si5B3Fe3). Filler metal for brazing. Powder or paste.
EN 3924 : 1998 ; Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Tape.
EN 3925 : 2001 ; Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Amorphous foil.
EN 3926 : 2001 ; Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Borided foil.
EN 3928 : 1998 ; Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Tape.
EN 3931 : 1998 ; Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Tape.
EN 3932 : 2001 ; Aerospace series. Nickel base alloy NI-B13001 (NiP11). Filler metal for brazing. Amorphous foil.
EN 3934 : 2001 ; Aerospace series. Nickel base alloy NI-B21001 (NiCr15B4). Filler metal for brazing. Amorphous foil.
EN 3935 : 2001 ; Aerospace series. Nickel base alloy NI-B21001 (NiCr15B4). Filler metal for brazing. Borided foil.
EN 3938 : 2001 ; Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3) Filler metal for brazing. Amorphous foil.
EN 3939 : 2001 ; Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Powder or paste.
EN 3940 : 1998 ; Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Tape.
EN 3941 : 2001 ; Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Amorphous foil.
EN 3942 : 2001 ; Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Borided foil.
EN 3943 : 2001 ; Aerospace series. Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3). Filler metal for brazing. Powder or paste.
EN 3944 : 1998 ; Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Tape.
EN 3945 : 2001 ; Aerospace series. Nickel base alloy NI-B48801 (NiMn19Si6Cu4B). Filler metal for brazing. Powder or paste.
EN 3946 : 2001 ; Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Powder or paste.
EN 3947 : 1998 ; Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Rolled foil.
EN 3948 : 1998 ; Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Wire.
EN 3969 : 2006 ; Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D $3L 350 mm.
EN 3971 : 2006 ; Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Annealed. Forging stock. a or D $3L 350 mm.
EN 3972 : 2006 ; Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Hardened and tempered. Bar for machining. De $3L 50 mm. 1250 MPa $3L Rm $3L 1400 MPa.
EN 3973 : 2006 ; Aerospace series. Steel FE-CM3801 (X5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened. Investment casting. De $3L 50 mm. Rm $3M 1030 MPa.
EN 3976 : 2006 ; Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content.
EN 3979 : 2005 ; Aerospace series. Aluminium alloy AL-P8090-O2 ; Sheet for superplastic forming (SPF). 0,8 mm $3L a $3L 6 mm.
EN 3982 : 2015 ; Aerospace series. Aluminium alloy AL-P7050 ; AlZn6CuMgZr. T7451 ; Plates. 6 mm $0L a $3L 160 mm.
EN 3983 : 2013 ; Aerospace series. Aluminium alloy AL-P7050-. T7651 ; Plate. 6 mm $0L a $3L 160 mm.
EN 3987 : 2009 ; Aerospace series. Test methods for metallic materials. Constant amplitude force-controlled high cycle fatigue testing.
EN 3997 : 2007 ; Aerospace series. Aluminium alloy AL-P2024-T3 ; Sheet and strip 0,4 mm $3Q a $3Q 6 mm.
EN 3997 : 2015 ; Aerospace series. Aluminium alloy AL-P2024-Al Cu4Mg1-T3 ; Sheet and strip. 0,4 mm $3L a $3L 6 mm.
EN 3998 : 2007 ; Aerospace series. Aluminium alloy AL-P2024-T4 or T42 ; Sheet and strip. 0,3 mm $3L a $3L 6 mm.
EN 3999 : 2007 ; Aerospace series. Aluminium alloy AL-P2024-T351 ; Sheet and strip with improved chemical milling capability 1,6 mm $3L a $3L 6 mm.
EN 4001 : 2007 ; Aerospace series. Aluminium alloy AL-P2024-T351 ; Clad sheet and strip with improved chemical milling capability 1,6 mm $3L a $3L 6 mm.
EN 4002 : 2007 ; Aerospace series. Aluminium alloy AL-P2219-T81 ; Sheet and strip 0,5 mm $3L a $3L 6 mm.
EN 4003 : 2006 ; Aerospace series. Aluminium alloy AL-P2219-T87 ; Sheet and strip 0,5 mm $3L a $3L 6 mm.
EN 4004 : 2007 ; Aerospace series. Aluminium alloy AL-P3103-H16 ; Sheet and strip. 0,4 mm $3L a $3L 6 mm.
EN 4005 : 2007 ; Aerospace series. Aluminium alloy AL-P5052-O. Sheet and strip 0,3 mm $3L a $3L 6 mm.
EN 4006 : 2007 ; Aerospace series. Aluminium alloy AL-P6082-T4 or T42 ; Sheet and strip 0,4 mm $3L a $3L 6 mm.
EN 4007 : 2005 ; Aerospace series. Aluminium alloy AL-P6082-T6 or T62 ; Sheet and strip. 0,4 mm 3L a 3L 6 mm.
EN 4008-001 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Technical specification
EN 4008-002 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. List of product standards
EN 4008-005 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01 ; Product standard
EN 4008-006 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/7 ; Product standard
EN 4008-007 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01 ; Product standard
EN 4008-007 : 2011 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01 ; Product standard
EN 4008-008 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/7-01 ; Product standard
EN 4008-008 : 2011 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/7-01 ; Product standard
EN 4008-011 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01 ; Product standard
EN 4008-012 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01 ; Product standard
EN 4008-013 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01 ; Product standard
EN 4008-014 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Turret for crimping tool M22520/31-01 ; Product standard
EN 4008-015 : 2007 ; Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories. Positioner for crimping tool M22520/2-01 ; Product standard
EN 4008-017 : 2006 ; Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Head for crimping tool M22520/4-01 ; Product standard
EN 4008-018 : 2014 ; Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories. Positioner for crimping tool M22520/2-01 ; Product standard
EN 4009 : 2004 ; Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification : 1550 MPa (at ambient temperature).
EN 4011 : 2004 ; Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification : 1550 MPa (at ambient temperature)/600^DC.
EN 4013 : 2004 ; Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification : 1550 MPa (at ambient temperature) / 600^DC.
EN 4014 : 2004 ; Aerospace series. Inserts, thickwall, self-locking. Design standard.
EN 4018 : 2009 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Elbows 90$0D with thrust wire nut.
EN 4020 : 2009 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Elbows 90$0D, welded end with thrust wire nut.
EN 4023 : 2010 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Elbows 45$0D.
EN 4024 : 2009 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Elbows 45$0D welded end with thrust wire nut.
EN 4025 : 2010 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Elbows 45$0D, bulkhead.
EN 4033 : 2007 ; Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9, reduced internal radial clearance. Dimensions and loads.
EN 4034 : 2007 ; Aerospace series. Bearings, airframe rolling. Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads.
EN 4035 : 2006 ; Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads.
EN 4036 : 2006 ; Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads.
EN 4040 : 2006 ; Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring. Elevated loads at ambient temperature. Dimensions and loads.
EN 4041 : 2006 ; Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush. Dimensions and loads.
EN 4047 : 2004 ; Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification : 1550MPa (at ambient temperature)/600^DC. Technical specification.
EN 4048 : 2004 ; Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS$d2 coated. Classification. 1 550 MPa (at ambient temperature) / 425^DC. Technical specification.
EN 4049-001 : 2006 ; Aerospace series. Thermocouple extension cable. Operating temperatures between -65^DC and 260^DC. Technical specification
EN 4049-002 : 2005 ; Aerospace series. Thermocouple extension cable. Operating temperatures between -65^DC and 260^DC. General
EN 4049-003 : 2006 ; Aerospace series. Thermocouple extension cable. Operating temperatures between -65^DC and 260^DC. Single core nickel chromium/nickel aluminium. Product standard
EN 4049-004 : 2006 ; Aerospace series. Thermocouple extension cable. Operating temperatures between -650DC and 260^DC. Two core nickel chromium/nickel aluminium shielded and jacketed. Product standard
EN 4050-1 : 2012 ; Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. General requirements
EN 4050-2 : 2012 ; Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Performance of test
EN 4050-3 : 2012 ; Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Reference blocks
EN 4050-4 : 2012 ; Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Acceptance criteria
EN 4056-001 : 2006 ; Aerospace series. Cable ties for harnesses. Technical specification
EN 4056-001 : 2015 ; Aerospace series. Cable ties for harnesses. Technical specification
EN 4056-002 : 2014 ; Aerospace series. Cable ties for harnesses. Index of product standards
EN 4056-003 : 2016 ; Aerospace series. Cable ties for harnesses. Plastic cable ties. Operating temperatures -65 ^DC to 105 ^DC and -65 ^DC to 150 ^DC. Product standard
EN 4056-004 : 2014 ; Aerospace series. Cable ties for harnesses. Plastic cable ties. For operating temperatures – 55^DC to 105^DC and – 55^DC to 150^DC. Product standard
EN 4056-006 : 2014 ; Aerospace series. Cable ties for harnesses. Peek cable ties. For operating temperatures. -55 ^DC to 240 ^DC. Product standard
EN 4057-100 : 2006 ; Aerospace series. Cable ties for harnesses. Test methods. General
EN 4057-201 : 2005 ; Aerospace series. Cable ties for harnesses. Test methods. Visual examination
EN 4057-202 : 2005 ; Aerospace series. Cable ties for harnesses. Test methods. Examination of mass and dimensions
EN 4057-301 : 2005 ; Aerospace series. Cable ties for harnesses. Test methods. Salt mist test
EN 4057-302 : 2006 ; Aerospace series. Cable ties for harnesses. Test methods. Flammability
EN 4057-303 : 2005 ; Aerospace series. Cable ties for harnesses. Test methods. Resistance to fluids
EN 4057-304 : 2006 ; Aerospace series. Cable ties for harnesses. Test methods. Loop tensile strength at maximum working temperature
EN 4057-305 : 2005 ; Aerospace series. Cable ties for harnesses. Test methods. Colour fastness
EN 4057-306 : 2006 ; Aerospace series. Cable ties for harnesses. Test methods. Heat ageing test
EN 4057-307 : 2006 ; Cable ties for harnesses. Test methods. Resistance to ultra violet radiation
EN 4057-401 : 2006 ; Aerospace series. Cable ties for harnesses. Test methods. Loop tensile strength
EN 4057-402 : 2006 ; Aerospace series. Cable ties for harnesses. Test methods. Life cycle
EN 4057-402 : 2014 ; Aerospace series. Cable ties for harnesses. Test methods. Life cycle
EN 4057-404 : 2006 ; Aerospace series. Cable ties for harnesses. Test methods. Low temperature installation
EN 4057-405 : 2005 ; Aerospace series. Cable ties for harnesses. Test methods. Compass safe distance
EN 4057-406 : 2006 ; Aerospace series. Cable ties for harnesses. Test methods. Locking device retention
EN 4057-407 : 2005 ; Aerospace series. Cable ties for harnesses. Test methods. Verification of application tool settings
EN 4069 : 1996 ; Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated. Classification : 600MPa (at ambient temperature)/650^DC.
EN 4071 : 2009 ; Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification : 1100 MPa (at ambient temperature) / 425 ^DC.
EN 4072 : 2009 ; Aerospace series. Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification : 1100 MPa (at ambient temperature) / 425 °C.
EN 4072 : 2016 ; Aerospace series. Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated. Classification : 1 100 MPa (at ambient temperature) / 425 ^DC.
EN 4073 : 2009 ; Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification 1100 MPa (at ambient temperature) / 235^DC.
EN 4073 : 2016 ; Aerospace series. Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 ^DC.
EN 4074 : 2009 ; Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification : 1100 MPa (at ambient temperature)/425^DC.
EN 4075 : 2008 ; Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification : 490 MPa (at ambient temperature) / 425 ^DC.
EN 4078 : 2009 ; Aerospace series. Inserts, threaded, thin wall, locked and self-locking, in heat resisting steel, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4084 : 2009 ; Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 235^DC.
EN 4085 : 2001 ; Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Amorphous foil.
EN 4098 : 2007 ; Aerospace series. Steel FE-PL1507 (40CrMoV12). Remelted, hardened and tempered, forgings De $3L 50 mm, 1250 MPa $3L Rm $3L 1400 MPa.
EN 4099 : 2005 ; Aerospace series. Aluminium alloy AL-P2219-T6 or T62 ; Clad sheet and strip. 0,5 mm $3L a $3L 6 mm.
EN 4100 : 2005 ; Aerospace series. Aluminium alloy AL-P2219-T6 or T62 ; Sheet and strip. 0,5 mm $3L a $3L 6 mm.
EN 4101 : 2005 ; Aerospace series. Aluminium alloy AL-P2024-T4 ; Sheet and strip with improved stretch forming capability. 0,4 mm $3L a $3L 6 mm.
EN 4102 : 2005 ; Aerospace series. Aluminium alloy AL-P2219-T81 ; Clad sheet and strip. 0,5 mm $3La $3L6 mm.
EN 4105 : 1998 ; Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape.
EN 4106 : 2013 ; Aerospace series. Non-metallic materials. Structural adhesive systems. Paste adhesive. Technical specification.
EN 4108 : 2006 ; Aerospace series. Wrenches, crow foot, attachment socket, socket drive.
EN 4111 : 2006 ; Aerospace series. Wrenches, splined, sockets, for pipe fittings. Technical specification.
EN 4113 : 2009 ; Aerospace series. Clamps, loop (“P” type) in corrosion resisting steel, passivated, with rubber cushioning. Dimensions, masses.
EN 4114 : 2009 ; Aerospace series. Clamps, loop (”P” type) in aluminium alloy with rubber cushioning. Dimensions, masses.
EN 4115 : 2010 ; Aerospace series. Cushion, rubber for clamps. Dimensions, masses.
EN 4118 : 2004 ; Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification : 1100 MPa (at ambient temperature) / 650^DC.
EN 4119 : 2004 ; Aerospace series. Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification : 1100 MPa (at ambient temperature) / 650^DC.
EN 4120 : 2004 ; Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread. Classification : 1210 MPa (at ambient temperature) / 730^DC.
EN 4124 : 2004 ; Aerospace series. Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60$0D swage. Classification. 1 210 MPa (at ambient temperature) / 730^DC.
EN 4127 : 2009 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification : 1100 MPa (at ambient temperature)/ 425 ^DC.
EN 4128 : 2009 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification : 1250 MPa (at ambient temperature) / 425 ^DC.
EN 4128 : 2016 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification : 1 250 MPa (at ambient temperature) / 425 ^DC.
EN 4129 : 2009 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) / 235^DC.
EN 4130 : 2009 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification : 1100 MPa (at ambient temperature) / 425 ^DC.
EN 4131 : 2009 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification : 1250 MPa (at ambient temperature) / 425 ^DC.
EN 4132 : 2009 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature)/235^DC.
EN 4133 : 2009 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated. Classification : 1100 MPa (at ambient temperature) / 425 ^DC.
EN 4134 : 2009 ; Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification : 1250 MPa (at ambient temperature)/425^DC.
EN 4135 : 2009 ; Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 4136 : 2009 ; Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification : 1100 MPa at ambient temperature)/235^DC.
EN 4137 : 2009 ; Aerospace series. Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 4138 : 2009 ; Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) / 235^DC.
EN 4138 : 2016 ; Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 ^DC.
EN 4156 : 2013 ; Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series.
EN 4158 : 2006 ; Aerospace series. Paints and varnishes. Test method for measurement of electrical surface resistance of conductive layers.
EN 4159 : 2011 ; Aerospace series. Paints and Varnishes. Determination of resistance to microbial growth.
EN 4160 : 2011 ; Aerospace series. Paints and varnishes. Determination of the effect of thermal exposure.
EN 4161 : 2009 ; Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature) / 235 ^DC.
EN 4162 : 2009 ; Aerospace series. Screws 100$0D countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. 1100 MPa (at ambient temperature) / 235^DC.
EN 4162 : 2016 ; Aerospace series. Screws 100$0D countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 ^DC.
EN 4163 : 2009 ; Aerospace series. Screws 100$0D countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. 1100 MPa (at ambient temperature) / 235^DC.
EN 4163 : 2016 ; Aerospace series. Screws 100$0D countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 ^DC.
EN 4165-001 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Technical specification
EN 4165-001 : 2015 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Technical specification
EN 4165-002 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Specification of performance and contact arrangements
EN 4165-002 : 2015 ; Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Specification of performance and contact arrangements
EN 4165-003 : 2008 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Modules series 2 and series 3 ; Product standard
EN 4165-003 : 2016 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Modules series 2 and series 3 ; Product standard
EN 4165-004 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Stackable mounting receptacle 2 and 4 modules, series 2 ; Product standard
EN 4165-005 : 2007 ; Aerospace series. Connectors, electrical, rectangular, Modular. Operating temperatures 175 ^DC continuous. Stackable receptacle 2 and 4 modules, series 3 ; Product standard
EN 4165-006 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Plug for 2 and 4 modules, series 2 ; Product standard
EN 4165-007 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Plug for 2 and 4 modules, series 3 ; Product standard
EN 4165-008 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Rack and panel plug for 2 and 4 modules, series 2 ; Product standard
EN 4165-009 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Rack and panel plug for 2 and 4 modules, series 3 ; Product standard
EN 4165-010 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Rack and panel rear mounted plug for 2 and 4 modules, series 2 ; Product standard
EN 4165-011 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Flange mounting receptacle 2 and 4 modules, series 2 ; Product standard
EN 4165-012 : 2005 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Flange mounting receptacle 2 or 4 modules, series 3 ; Product standard
EN 4165-013 : 2005 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Cable clamp 2 and 4 modules for connectors, series 2 and series 3 ; Product standard
EN 4165-013 : 2016 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Cable clamp 2 and 4 modules for connectors, series 2 and series 3 ; Product standard
EN 4165-014 : 2005 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 ; Product standard
EN 4165-015 : 2005 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Round chimney for accessory (1 per module cavity). Product standard
EN 4165-015 : 2015 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Round chimney for accessory (1 per module cavity), 2 and 4 modules. Product standard
EN 4165-016 : 2005 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Double oval chimney for accessory (1 per 2 modules). Product standard
EN 4165-017 : 2005 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Blank chimney for accessory (1 per module cavity). Product standard
EN 4165-018 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Protective cover for receptacle 2 or 4 modules, series 2 and series 3 ; Product standard
EN 4165-018 : 2015 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Protective cover for all receptacles series 2 ; Product standard
EN 4165-020 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Coupling system keyway for receptacle. Product standard
EN 4165-021 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Coupling system keyway for plug. Product standard
EN 4165-022 : 2005 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Insertion/extraction tool for removal of modules. Product standard
EN 4165-023 : 2007 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Tooling for assembly receptacle coding component. Product standard
EN 4165-024 : 2011 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Single module plug. Product standard
EN 4165-025 : 2011 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Module receptacle. Product Standard
EN 4165-026 : 2011 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Accessories for single modules. Product standard
EN 4165-026 : 2015 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 ^DC continuous. Accessories for single module connector. Product standard
EN 4165-027 : 2015 ; Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175^DC continuous. Rack and panel rear mounted plug for 2 and 4 modules, series 3 ; Product standard
EN 4166 : 2004 ; Aerospace series. Clips, spring tension, three parts. PTFE bushes.
EN 4167 : 2004 ; Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA2601 (A286).
EN 4168 : 2004 ; Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA2601 (A286).
EN 4170 : 2007 ; Aerospace series. Paints and varnishes. Test method for measurement of resistance to cold crack temperature cycle.
EN 4171 : 2011 ; Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index.
EN 4172 : 2006 ; Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification : 1 100 MPa (at ambient temperature) / 315^DC.
EN 4173 : 2006 ; Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4174 : 2006 ; Aerospace series. Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series.
EN 4175 : 2005 ; Aerospace series. Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series.
EN 4176 : 2005 ; Aerospace series. Lockbolts, 100$0D countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024 ; Metric series. Technical specification.
EN 4178 : 2009 ; Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. 1100 MPa (at ambient temperature) / 315 ^DC.
EN 4179 : 2000 ; Qualification and approval of personnel for non-destructive testing.
EN 4179 : 2005 ; Aerospace series. Qualification and approval of personnel for non-destructive testing.
EN 4179 : 2009 ; Aerospace series. Qualification and approval of personnel for non-destructive testing.
EN 4195 : 2011 ; Aerospace series. Paints and varnishes. Test method for determination of chromate leaching.
EN 4198 : 2006 ; Aerospace series. Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads.
EN 4199-001 : 2006 ; Aerospace series. Bonding straps for aircraft. Technical specification
EN 4199-001 : 2013 ; Aerospace series. Bonding straps for aircraft. Technical specification
EN 4199-002 : 2006 ; Aerospace series. Bonding straps for aircraft. Index of product standard
EN 4199-003 : 2009 ; Aerospace series. Bonding straps for aircraft. Bonding strap assemblies with flat braided conductor copper, tin plated -65^DC up to 150^DC and copper, nickel plated -65^DC up to 260^DC. Product standard
EN 4199-003 : 2014 ; Aerospace series. Bonding straps for aircraft. Bonding strap assemblies with flat braided conductor copper, tin plated – 65^DC up to 150^DC and copper, nickel plated – 65^DC up to 260^DC. Product standard
EN 4199-004 : 2009 ; Aerospace series. Bonding straps for aircraft. Round bonding straps, copper, tin plated -65 ^DC up to 150 ^DC and nickel plated -65 ^DC up to 260 ^DC. Product standard
EN 4199-004 : 2014 ; Aerospace series. Bonding straps for aircraft. Round bonding straps, copper, tin plated -65^DC up to 150^DC and nickel plated -65^DC up to 260^DC. Product Standard
EN 4199-005 : 2009 ; Aerospace series. Bonding straps for aircraft. Flat braid conductors copper, tin plated -65^DC up to 150^DC and copper, nickel plated, -65^DC up to 260^DC. Product standard
EN 4199-006 : 2006 ; Aerospace series. Bonding straps for aircraft. Round braid copper conductors for bonding straps, tin plated up to 150^DC or nickel plated up to 260^DC. Product standard
EN 4202 : 2005 ; Aerospace series. Aluminium alloy AL-P6082-T651 ; Plate. 6 mm $0L a $3L 25 mm.
EN 4203 : 2005 ; Aerospace series. Aluminium alloy AL-P8090-T89 ; Sheet. 0,6 mm $3L a $3L 6 mm.
EN 4204 : 2005 ; Aerospace series. Aluminium alloy AL-P8090 ; T841 ; Sheet. 0,6 mm $3L a $3L 6 mm.
EN 4209 : 2005 ; Aerospace series. Aluminium alloy AL-P2219-T851 ; Plate. 6 mm $0La $3L50 mm.
EN 4211 : 2005 ; Aerospace series. Aluminium alloy AL-P2024-T42 ; Clad plate. 6mm $0L a $3L 25mm.
EN 4212 : 2005 ; Aerospace series. Aluminium alloy AL-P5086-H111 ; Plate. 6mm $0L a $3L8 0mm.
EN 4213 : 2005 ; Aerospace series. Aluminium alloy AL-P6061-T651 ; Plate. 6mm $0La $3L 80mm.
EN 4214 : 2005 ; Aerospace series. Aluminium alloy AL-P7010-T651 ; Plate. 6 mm $0La $3L20 mm.
EN 4215 : 2005 ; Aerospace series. Aluminium alloy AL-P7175-T651 ; Plate. 6 mm $0La $3L80 mm.
EN 4216 : 2007 ; Aerospace series. Steel FE-CM3801 (GX5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened, investment casting De $3L 50 mm, Rm $3M 900 MPa.
EN 4234 : 2006 ; Aerospace series. Clamps, worm drive. Dimensions, masses.
EN 4234 : 2009 ; Aerospace series. Clamps, worm drive. Dimensions, masses.
EN 4247 : 2005 ; Aerospace series. Aluminium alloy AL-P2024-T42 ; Plate. 6 mm $0La $3L140 mm.
EN 4258 : 1998 ; Metallic materials. General organization of standardization. Links between types of EN standards and their use.
EN 4262 : 2013 ; Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D $3L 200 mm – 690 MPa $3L Rm $3L 880MPa.
EN 4263 : 2013 ; Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D $3L 200 mm – 690 MPa $3L Rm $3L 960MPa.
EN 4265 : 2013 ; Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel. Wide series. Dimensions and loads. Inch series.
EN 4266 : 2013 ; Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series.
EN 4268 : 2012 ; Aerospace series. Metallic materials. Heat treatment facilities. General requirements.
EN 4283 : 2005 ; Aerospace series. Aluminium alloy AL-P2219-T87 ; Plate. 6 mm $0L a $3L 40 mm.
EN 4286 : 2005 ; Aerospace series. Aluminium alloy AL-P8090-T89 ; Die forgings. a $3L 125 mm.
EN 4287 : 2005 ; Aerospace series. Aluminium alloy AL-P7010 ; Forging stock.
EN 4291 : 2005 ; Aerospace series. Aluminium alloy AL-P8090 ; Forging stock.
EN 4292 : 2005 ; Aerospace series. Aluminium alloy AL-R39002 ; Forging stock.
EN 4293 : 2014 ; Aerospace series. Aluminium alloy AL-P7175 ; T73511 ; Extruded bar and section. a or D $3L 150 mm.
EN 4300 : 2008 ; Aerospace series. Identification marking of engine items. Design standard.
EN 4301 : 2009 ; Aerospace series. Identification marking methods for engine items. Engineering requirements.
EN 4302 : 2008 ; Aerospace series. Open ring insert tool, square drive.
EN 4303 : 2005 ; Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness).
EN 4304 : 2005 ; Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness).
EN 4306 : 2005 ; Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness).
EN 4307 : 2005 ; Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness).
EN 4311 : 2006 ; Aerospace series. Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4312 : 2006 ; Aerospace series. Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4313 : 2005 ; Aerospace series. Aluminium aloy AL-P6013-T6 ; Sheet and strip. 0,5 mm $3La $3L6 mm.
EN 4314 : 2007 ; Aerospace series. Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15). Non heat treated, forging stock a or D = 250 mm.
EN 4315 : 2007 ; Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section a or D = 100 mm, Rm = 900 MPa.
EN 4317 : 2007 ; Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Non heat treated, forging stock a or D = 200 mm.
EN 4318 : 2007 ; Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section De = 100 mm, Rm = 960 MPa.
EN 4346 : 2007 ; Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D $3L 300 mm.
EN 4347 : 2007 ; Aerospace series. Steel FE-PM1506 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D $3L 300 mm.
EN 4354 : 2006 ; Aerospace series. Six lobe recess. Drivers, relieved.
EN 4355 : 2008 ; Aerospace series. Six lobe recess. Drivers, socket.
EN 4356 : 2006 ; Aerospace series. Six lobe recess. Drivers, short.
EN 4357 : 2006 ; Aerospace series. Six lobe recess. Drivers, handle.
EN 4358 : 2006 ; Aerospace series. Six lobe recess. Drivers, double ended, 90 ;
EN 4359 : 2006 ; Aerospace series. Six lobe recess. Drivers. Technical Specification.
EN 4372 : 2009 ; Aerospace series. Heat resisting nickel alloy with copper NI-PD9001 (NiCu31). Wire for solid rivets. D $3L 10 mm.
EN 4373 : 2007 ; Aerospace series. Heat resisting alloy NI-PD9001 (NiCu31). Annealed, seamless tube D = 75 mm, a = 3 mm.
EN 4376 : 2016 ; Aerospace series. Heat resisting alloy NiCr19Fe19Nb5Mo3 (2;4668) solution treated and precipitation treated. Bar and section, De $3L 200 mm.
EN 4377 : 2015 ; Aerospace series. Heat resisting alloy NiCr19Fe19Nb5Mo3 (2;4668). Non heat treated. Forging stock. a or D $3L 300 mm.
EN 4379 : 2007 ; Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb).Solution treated, forging De $3L 200 mm.
EN 4382 : 2006 ; Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D $3L 50 mm, a $3L 3 mm.
EN 4383 : 2006 ; Aerospace series. Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock.
EN 4384 : 2007 ; Aerospace series. Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al). Non heat treated. Remelting stock.
EN 4396 : 2008 ; Aerospace series. Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated.
EN 4399 : 2008 ; Aerospace series. Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated.
EN 4401 : 2006 ; Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4402 : 2006 ; Aerospace series. Lockbolts, 100$0D countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4406 : 2006 ; Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant.
EN 4408-1 : 2005 ; Aerospace series. Technical drawings. Representation of parts made of composite materials. General rules
EN 4408-2 : 2005 ; Aerospace series. Technical drawings. Representation of parts made of composite materials. Laminated parts
EN 4408-3 : 2005 ; Aerospace series. Technical drawings. Representation of parts made of composite materials. Parts including core materials
EN 4408-4 : 2005 ; Aerospace series. Technical drawings. Representation of parts made of composite materials. Items obtained by winding
EN 4408-5 : 2005 ; Aerospace series. Technical drawings. Representation of parts made of composite materials. Seams
EN 4408-6 : 2005 ; Aerospace series. Technical drawings. Representation of parts made of composite materials. Preforms
EN 4415 : 2006 ; Aerospace series. Non-metallic materials. Textiles. Narrow woven fabrics. Technical specification.
EN 4416 : 2006 ; Aerospace series. Non-metallic materials. Textiles. Wide woven fabrics. Technical specification.
EN 4421 : 2007 ; Aerospace series. Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel. Strength class : 1100 MPa(at ambient temperature).
EN 4424 : 2006 ; Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement : 1,5 x thread diameter in titanium alloys. Dimensions and loads.
EN 4425 : 2006 ; Aerospace series. Washers, tab in corrosion resisting steel for flight control rods. Dimensions.
EN 4429 : 2006 ; Aerospace series. Textiles. Testing of narrow woven fabrics. Determination of warp bow.
EN 4434 : 2005 ; Aerospace series. Copper or copper alloy lightweight conductors for electrical cables. Product standard (normal and tight tolerances).
EN 4443 : 2012 ; Aerospace series. Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated, Classification : 900 MPa (at ambient temperature)/425^DC.
EN 4449 : 2005 ; Aluminium alloy AL-P7050 ; T76 ; Sheet. 0,8 mm $3L a $3L 6 mm.
EN 4450 : 2005 ; Aerospace series. Aluminium alloy AL-P7050-T762 ; Sheet. 0,8 mm $3La $3L6 mm.
EN 4458 : 2005 ; Aerospace series. Studs, MJ threads, in titanium alloy TI-P64001, MoS$d2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class : 1100 MPa (at ambient temperature). Technicalspecification.
EN 4459 : 2005 ; Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Design standard.
EN 4460 : 2005 ; Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Installation and removal procedure.
EN 4461 : 2007 ; Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D $3L 150 mm. Rm $3M 1200 MPa.
EN 4462 : 2007 ; Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D $3L 150 mm. Rm $3M 1300 MPa.
EN 4463 : 2007 ; Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D $3L 150 mm. Rm $3M 1400 MPa.
EN 4464 : 2007 ; Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 150 mm. Rm $3M 1200 MPa.
EN 4465 : 2007 ; Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 150 mm. Rm $3M 1300 MPa.
EN 4466 : 2007 ; Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 150 mm. Rm $3M 1400 MPa.
EN 4467 : 2007 ; Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D $3L 150 mm. Rm $3M 1200 MPa.
EN 4468 : 2007 ; Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D $3L 150 mm. Rm $3M 1300 MPa.
EN 4469 : 2007 ; Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D $3L 150 mm. Rm $3M 1400 MPa.
EN 4470 : 2007 ; Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 150 mm. Rm $3L 1200 MPa.
EN 4471 : 2007 ; Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 150 mm. Rm $3M 1300 MPa.
EN 4472 : 2007 ; Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 150 mm. Rm $3M 1400 MPa.
EN 4473 : 2010 ; Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification.
EN 4474 : 2009 ; Aerospace series. Aluminium pigmented coatings. Coating methods.
EN 4474 : 2016 ; Aerospace series. Aluminium pigmented coatings. Coating methods.
EN 4476 : 2011 ; Aerospace series. Paints and varnishes. Cold curing intermediate coat.
EN 4488 : 2013 ; Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 2 Nm.
EN 4491 : 2013 ; Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 16 Nm.
EN 4492 : 2013 ; Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 19 Nm.
EN 4493 : 2008 ; Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NIP96HT, Nimonic 90), silver plated.
EN 4494 : 2006 ; Aerospace series. Rings, split, in stainless steel.
EN 4495 : 2006 ; Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4496 : 2005 ; Aerospace series. Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification : 1100 MPa (at ambient temperature) / 315 ^DC.
EN 4497 : 2005 ; Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification : 1 100 MPa (at ambient temperature) / 315 ^DC.
EN 4498 : 2005 ; Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification : 1 550 MPa (at ambient temperature) / 315 ^DC.
EN 4499 : 2009 ; Aerospace series. Screws, 100$0D countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification : 1100 MPa (at ambient temperature) / 315 ^DC.
EN 4500-001 : 2012 ; Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. General rules
EN 4500-003 : 2012 ; Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for heat resisting alloys
EN 4500-004 : 2012 ; Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for titanium and titanium alloys
EN 4500-005 : 2012 ; Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for steels
EN 4501 : 2006 ; Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4503 : 2013 ; Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water soluble chloride and sulfate of aqueous extracts.
EN 4504 : 2013 ; Aerospace series. Non-metallic materials, Textiles. Test method. Determination of flexibility of narrow fabrics.
EN 4505 : 2013 ; Aerospace series. Non-metallic materials. Textiles. Test method. Determination of dimensional stability.
EN 4507 : 2013 ; Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water extractable matter.
EN 4508 : 2006 ; Aerospace series. Paints and varnishes. Test method for anti slip coatings. Determination of the sliding friction behaviour.
EN 4509 : 2006 ; Screws, 100$0D countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification : 1100 MPa (at ambient temperature)/315^DC.
EN 4526 : 2013 ; Aerospace series. Metallic materials. Test methods. Sharp edge-notch tensile testing for sheet and strip.
EN 4528 : 2009 ; Aerospace series. Steel FE-PA 3903 (X10CrNi18-8). Cold rolled. Strip for springs. a $3L 3 mm. 1250 MPa $3L Rm $3L 1640 MPa.
EN 4529-001 : 2006 ; Aerospace series. Elements of electrical and optical connection. Sealing plugs. Technical specification
EN 4529-002 : 2006 ; Aerospace series. Elements of electrical and optical connection. Sealing plugs. Index of product standards
EN 4529-003 : 2006 ; Aerospace series. Elements of electrical and optical connection. Sealing plugs. Class T. Product standard
EN 4530-001 : 2006 ; Aerospace series. Sealing sleeves used in elements of connection. Technical specification
EN 4530-002 : 2006 ; Aerospace series. Sealing sleeves used in elements of connection. List and utilization of sealing sleeves
EN 4530-005 : 2006 ; Aerospace series. Sealing sleeves used in elements of connection. Sealing sleeves for external diameter cable 3 mm to 4;1 mm. Product standard
EN 4530-006 : 2006 ; Aerospace series. Sealing sleeves used in elements of connection. Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm. Product standard
EN 4531-001 : 2007 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Technical specification
EN 4531-001 : 2012 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts . Technical specification
EN 4531-002 : 2007 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Specification of performance and contact arrangements
EN 4531-002 : 2012 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Specification of performance and contact arrangements
EN 4531-002 : 2016 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Specification of performance and contact arrangements
EN 4531-003 : 2007 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Square flange receptacle. Product standard
EN 4531-003 : 2012 ; Aerospace series. Connectors, optical, circular, single andmultipin, coupled by triple start threaded ring. Flushcontacts. Square flange receptacle. Product standard
EN 4531-004 : 2007 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Jam nut receptacle. Product standard
EN 4531-004 : 2012 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flushcontacts. Jam nut receptacle. Product standard
EN 4531-005 : 2007 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Plug. Product standard
EN 4531-005 : 2012 ; Aerospace series. Connectors, optical, circular, single andmultipin, coupled by triple start threaded ring. Flushcontacts. Plug. Product standard
EN 4531-101 : 2007 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Optical contact for EN 4641-100 cable. 55^DC to 125^DC. Product standard
EN 4531-101 : 2012 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Optical contact for EN 4641-100 cable -55$0D C to 125$0D C. Product standard
EN 4531-101 : 2016 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Optical contact for EN 4641 multimode cable -55^DC to 125^DC. Product standard
EN 4531-201 : 2016 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Optical contact for EN 4641 singlemode cable -55 ^DC to 125 ^DC. Product standard
EN 4531-901 : 2012 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Filler plugs. Product standard
EN 4532 : 2009 ; Aerospace series. Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket. Technical specification.
EN 4533-001 : 2006 ; Aerospace series. Fibre optic systems. Handbook. Termination methods and tools
EN 4533-002 : 2006 ; Aerospace series. Fibre optic systems. Handbook. Test and measurement
EN 4533-003 : 2006 ; Aerospace series. Fibre optic systems. Handbook. Looming and installation practices
EN 4533-004 : 2006 ; Aerospace series. Fibre optic systems. Handbook. Repair, maintenance and inspection
EN 4534-2 : 2009 ; Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated load. Dimensions and loads. Inch series
EN 4534-2 : 2016 ; Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated load. Dimensions and loads. Inch series
EN 4535-2 : 2009 ; Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load. Dimensions and loads. Inch series
EN 4535-2 : 2016 ; Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load. Dimensions and loads. Inch series
EN 4536-2 : 2009 ; Aerospace series. Bushes, plain in corrosion-resisting steel with self-lubricating liner, elevated load. Dimensions and loads. Inch series
EN 4537-2 : 2009 ; Aerospace series. Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load. Dimensions and loads. Inch series
EN 4538-2 : 2014 ; Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads. Inch series
EN 4538-003 : 2010 ; Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads. Inch series with low friction coefficient
EN 4539-003 : 2010 ; Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Wide series. Dimensions and loads. Inch series with low friction coefficient
EN 4540 : 2011 ; Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Technical specification.
EN 4549 : 2014 ; Aerospace series. Pipe coupling, in heat resisting steel or in heat resisting nickel alloy. Coupling end, welded. Design configuration. Inch series.
EN 4550-1 : 2014 ; Aerospace series. Pipe coupling, 37$0D. Design configuration. Inch series. Male sealing ends, spherical
EN 4550-4 : 2014 ; Aerospace series. Pipe coupling, 37$0D. Design configuration. Inch series. Female sealing ends
EN 4551 : 2014 ; Aerospace series. Pipe coupling, 37$0D, in heat resisting steel. Swivel nuts. Inch series.
EN 4588 : 2007 ; Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip.
EN 4590 : 2005 ; Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated.
EN 4591 : 2005 ; Aerospace series. Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS$d2 lubricated. Classification : 15 50 MPa (at ambient temperature) / 315^DC.
EN 4592 : 2006 ; Aerospace series. Paints and varnishes. Test method for determination of infrared reflectance.
EN 4593 : 2011 ; Aerospace series. Paints and varnishes. Determination of solar absorptance.
EN 4594 : 2013 ; Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance.
EN 4595 : 2013 ; Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance.
EN 4604-001 : 2006 ; Aerospace series. Cable, electrical, for signal transmission. Technical specification
EN 4604-001 : 2009 ; Aerospace series. Cable, electrical, for signal transmission. Technical specification
EN 4604-002 : 2006 ; Aerospace series. Cable, electrical, for signal transmission. General
EN 4604-002 : 2009 ; Aerospace series. Cable, electrical, for signal transmission. General
EN 4604-003 : 2009 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohm, 200 ^DC, type WZ. Product standard
EN 4604-004 : 2007 ; Aerospace series. Cable, electrical, for signal transmission. Cable, microcoaxial, high immunity, 50 Ohms, 200^DC, type WS. Product standard
EN 4604-006 : 2009 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohm, 200 ^DC, type WM. Product standard
EN 4604-007 : 2007 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial 50 Ohms, 200^DC, type WN. Product standard
EN 4604-008 : 2009 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohms, 200 ^DC., Type WD. Product standard
EN 4604-009 : 2009 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, light weight, 50 ohms, 180 ^DC, type KW (light WN). Product standard
EN 4604-009 : 2011 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, light weight, 50 ohms, 180 ^DC, type KW (light WN). Product standard
EN 4604-009 : 2014 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, light weight, 50 ohms, 180^DC, type KW (light WN). Product standard
EN 4604-010 : 2009 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohms, 200 ^DC, Type KX (light WN). Product standard
EN 4604-010 : 2011 ; Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, light weight, 50 Ohms, 200 ^DC, type KX (light WD). Product standard
EN 4608-001 : 2006 ; Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65^DC and 260^DC. Technical specification
EN 4608-002 : 2006 ; Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65^DC and 260^DC. General
EN 4608-003 : 2012 ; Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 ^DC and 260 ^DC. DN family. Lightweight. UV Laser printable. Product standard
EN 4608-004 : 2015 ; Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between – 65^DC and 260^DC. DW family. Lightweight. UV Laser printable. Product standard
EN 4608-005 : 2012 ; Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 ^DC and 260 ^DC. DW family. Lightweight two-core gauge 24 for data transmission. UV laser printable. Product standard
EN 4610 : 2005 ; Aerospace series. Pipe coupling with 8$0D 30′ in titanium alloy. Elbows 45$0D, with thrust wire nut.
EN 4611-002 : 2012 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. General
EN 4611-003 : 2012 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Tin plated copper. Operating temperatures, between -65 ^DC and 135 ^DC. Single extruded wall for enclosed applications. UV laser printable. Product standard
EN 4611-004 : 2012 ; Aerospace series. Cables, electrical, for general purpose,single and multicore assembly. XLETFE Family. Tin plated copper. Operating temperatures, between -65 ^DC and 135 ^DC. Dual extruded wall for open applications. UV laser printable. Product standard
EN 4611-005 : 2012 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Silver plated copper. Operating temperatures, between -65 ^DC and 150 ^DC. Single extruded wall for enclosed applications. UV laser printable. Product standard
EN 4611-006 : 2012 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Silver plated copper. Operating temperatures, between -65^DC and 150^DC. Dual extruded wall for open applications. UV laser printable. Product standard
EN 4611-007 : 2012 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Nickel plated copper. Operating temperatures, between -65^DC and 150^DC. Dual extruded wall for open applications. UV laser printable. Product standard
EN 4611-008 : 2012 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. BP. Nickel plated copper. Operating temperatures, between -65^DC and 150^DC. Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
EN 4611-009 : 2012 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. BJ. Nickel plated copper. Operating temperatures, between -65^DC and 150^DC. Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
EN 4612-002 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed . General
EN 4612-003 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Tin plated copper. Operating temperatures, between -65 ^DC and 135 ^DC. Single extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
EN 4612-004 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Tin plated copper. Operating temperatures, between -65 ^DC and 135 ^DC. Single extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
EN 4612-005 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Tin plated copper. Operating temperatures, between -65 ^DC and 135 ^DC. Dual extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
EN 4612-006 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Tin plated copper. Operating temperatures, between -65 ^DC and 135 ^DC. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
EN 4612-007 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Silver plated copper. Operating temperatures, between -65 ^DC and 150 ^DC. Single extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
EN 4612-008 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly XLETFE Family. Jacketed or screened and jacketed. Silver plated copper. Operating temperatures, between -65 ^DC and 150 ^DC. Single extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
EN 4612-009 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Silver plated copper. Operating temperatures, between -65 ^DC and 150 ^DC. Dual extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
EN 4612-010 : 2011 ; Aerospace series. Cables, electrical, for general cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Silver plated copper. Operating temperatures, between -65^DC and 150^DC. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
EN 4612-011 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Nickel plated copper. Operating temperatures, between -65 ^DC and 150 ^DC. Dual extruded wall for open applications, with jacket without screen. UV laser printable. Product standard
EN 4612-012 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Nickel plated copper. Operating temperatures, between -65 ^DC and 150 ^DC. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard
EN 4612-013 : 2011 ; Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. SX, TC and UC. Nickel plated copper. Operating temperatures, between -65^DC and 150^DC. Single extruded wall for equipment only, with jacket and screen (spiral). UV laser printable. Product standard
EN 4613 : 2009 ; Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series .
EN 4614 : 2009 ; Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series.
EN 4615 : 2005 ; Aerospace series. Magnesium alloy MG-C18002 ; T4 ; Sand casting.
EN 4616 : 2005 ; Aerospace series. Magnesium alloy MG-C18002 ; T4 ; Chill casting.
EN 4617 : 2006 ; Aerospace series. Recommended practices for standardizing company standards.
EN 4618 : 2009 ; Aerospace series. Aircraft internal air quality standards, criteria and determination methods.
EN 4619 : 2010 ; Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Installation and removal procedure.
EN 4620 : 2010 ; Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Design standard.
EN 4621 : 2010 ; Aerospace series. Inserts, MJ threads, self-locking, self-broaching keys. Technical specification.
EN 4622 : 2010 ; Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated.
EN 4623 : 2010 ; Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated.
EN 4624 : 2010 ; Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate.
EN 4626-001 : 2008 ; Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 ^DC to 125 ^DC (cable dependent). Flush contacts. Technical specification
EN 4626-002 : 2008 ; Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65^DC to 125^DC (cable dependent). Flush contacts. Specification of performance and contact arrangements
EN 4626-003 : 2008 ; Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65^DC to 125^DC (cable dependent). Flush contacts. Adaptor for plug
EN 4626-004 : 2008 ; Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65^DC to 125^DC (cable dependent). Flush contacts. Adaptor for receptacle
EN 4626-101 : 2008 ; Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65^DC to 125^DC (cable dependent). Flush contacts. Optical contact (sub-assembly) for plug. Product standard
EN 4626-201 : 2009 ; Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 ^DC to 125 ^DC (cable dependent). Flush contacts. Optical contact (sub-assembly) for receptacle. Product standard
EN 4626-202 : 2009 ; Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65^DC to 125^DC (cable dependent). Flush contacts. Optical contact assembly for 900 $Gmm buffered fibre receptacle. Product standard
EN 4627 : 2007 ; Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De $3L 150 mm. 1100 MPa $3L Rm $3L 1300 MPa.
EN 4627 : 2014 ; Aerospace series. Steel X4CrNiMo16-5-1 (1;4418). Air melted. Hardened and tempered. Forgings. De $3L 200 mm. 1 150 MPa $3L Rm $3L 1 300 MPa.
EN 4628 : 2007 ; Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De $3L 150 mm. 1100 MPa $3L Rm $3L 1300 MPa.
EN 4628 : 2013 ; Aerospace series. Steel X4CrNiMo16-5-1 (1;4418). Air melted. Hardened and tempered. Bar. De $3L 200 mm. 1 150 MPa $3L Rm $3L 1 300 MPa.
EN 4629 : 2007 ; Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forging stock. De $3L 300 mm.
EN 4629 : 2013 ; Aerospace series. Steel X4CrNiMo16-5-1 (1;4418). Air melted. Softened. Forging stock. De $3L 300 mm.
EN 4630 : 2007 ; Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De $3L 200 mm. 900 MPa $3L Rm $3L 1050 MPa.
EN 4630 : 2014 ; Aerospace series. Steel X4CrNiMo16-5-1 (1;4418). Air melted. Hardened and tempered. Forgings. De $3L 200 mm. 900 MPa $3L Rm $3L 1 050 MPa.
EN 4631 : 2007 ; Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De $3L 200 mm. 900 MPa $3L Rm $3L 1050 MPa.
EN 4631 : 2013 ; Aerospace series. Steel X4CrNiMo16-5-1 (1;4418). Air melted. Hardened and tempered. Bar. De $3L 200 mm. 900 MPa $3L Rm $3L 1 050 MPa.
EN 4632-001 : 2008 ; Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. General requirements
EN 4632-002 : 2008 ; Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. Homogeneous assemblies aluminium and aluminium alloys
EN 4632-003 : 2010 ; Aerospace series. Weldability and brazeability of materials in aerospace constructions. Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
EN 4632-004 : 2012 ; Aerospace series. Weldability and brazeability of materials in aerospace constructions. Welding and brazing of homogeneous assemblies of high alloyed steels
EN 4632-005 : 2009 ; Aerospace series. Weldability and brazeability of materials in aerospace constructions. Homogeneous assemblies of heat resisting Ni or Co base alloys
EN 4632-006 : 2013 ; Aerospace series. Weldability and brazeability of materials in aerospace constructions. Homogeneous assemblies of titanium alloys
EN 4635 : 2009 ; Aerospace series. Screws, 100$0D countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification : 1270 MPa (at ambient temperature) / 650 ^DC.
EN 4636 : 2009 ; Aerospace series. Screws, 100$0D countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification : 1100 MPa (at ambient temperature) / 315^DC.
EN 4637 : 2010 ; Aerospace series. Blast media. White corundum.
EN 4638 : 2010 ; Aerospace series. Blast media. Brown corundum, without iron.
EN 4639-001 : 2007 ; Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Technical specification
EN 4639-002 : 2007 ; Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. List of product standards
EN 4639-003 : 2007 ; Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Male optical module. Product standard
EN 4639-004 : 2007 ; Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Female optical module. Product standard
EN 4639-005 : 2007 ; Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Removable alignment sleeve holder. Product standard
EN 4639-101 : 2007 ; Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Optical contact for cable EN 4641-100 ; Operating temperatures between -65^DC and 125^DC. Product standard
EN 4639-102 : 2007 ; Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Optical contact for cable EN 4641-102 ; Operating temperatures between -55^DC and 100^DC. Product standard
EN 4640-001 : 2009 ; Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Technical specification
EN 4640-002 : 2009 ; Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. List of product standards
EN 4640-003 : 2008 ; Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Plug optical connector. Product standard
EN 4640-004 : 2008 ; Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Receptacle optical connector. Product standard
EN 4641-001 : 2009 ; Aerospace series. Cables, optical, 125 µm diameter cladding. Technical specification
EN 4641-100 : 2015 ; Aerospace series. Cables, optical 125 $Gmm diameter cladding. Tight structure 62,5/125 $Gmm core GI fibre 1,8 mm outside diameter. Product standard
EN 4641-101 : 2015 ; Aerospace series. Cables, optical 125 $Gmm diameter cladding. Tight structure 62,5 $Gmm core GI fibre 0,9 mm outside diameter. Product standard
EN 4641-102 : 2009 ; Aerospace series. Cables, optical 125 $Gmm outside diameter cladding. Semi-loose 62,5/125 $Gmm GI fibre nominal 1,8 mm outside diameter. Product standard
EN 4641-103 : 2010 ; Aerospace series. Cables, optical 125 $Gmm diameter cladding. Semi-loose, ruggedized simplex construction 62,5/125 $Gmm GI fibre nominal 2,74 mm, outside diameter. Product standard
EN 4641-104 : 2010 ; Aerospace series. Cables, optical 125 $Gmm diameter cladding. Semi-loose, ruggedized duplex construction 62,5/125 $Gmm GI fibre nominal, 4,95 mm outside diameter. Product standard
EN 4641-105 : 2010 ; Aerospace series. Cables, optical 125 $Gmm diameter cladding. Semi-loose, ruggedized quadraxial construction 62,5/125 $Gmm GI fibre nominal, 5,72 mm outside diameter. Product standard
EN 4641-301 : 2011 ; Aerospace series. Cables, optical 125 $Gmm diameter cladding. Tight structure 50/125 $Gmm GI fibre nominal 1,8 mm outside diameter. Product standard
EN 4642 : 2009 ; Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet and plate. 0,6 mm $3L a $3L 50 mm. 900 MPa $3L Rm $3L 1050 MPa.
EN 4644-001 : 2012 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Technical specification
EN 4644-002 : 2012 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Specification of performance and contact arrangements
EN 4644-003 : 2009 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC continuous. Rectangular inserts. Product standard
EN 4644-003 : 2011 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Rectangular inserts. Product standard
EN 4644-003 : 2016 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Rectangular inserts. Product standard
EN 4644-012 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Receptacle, size 1, class A, C and E. Product standard
EN 4644-014 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Receptacle, size 1, with ground block, class B and F. Product standard
EN 4644-021 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175^DC (or 125^DC) continuous. Plug, size 2, without mounting holes, class A, C and E. Product standard
EN 4644-022 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175^DC (or 125^DC) continuous. Plug, size 2, with mounting holes, class A, C and E. Product standard
EN 4644-023 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175^DC (or 125^DC) continuous. Plug, size 2, with ground block, class B and F. Product standard
EN 4644-024 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Receptacle size 2, class A, C and E. Product standard
EN 4644-025 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Receptacle, size 2, with flange, class A, C and E. Product standard
EN 4644-026 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Receptacle size 2 with ground block, class B and F. Product standard
EN 4644-131 : 2011 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Size 3 plug for rack and panel applications. Product standard
EN 4644-131 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Size 3 plug for rack and panel applications, class C and D. Product standard
EN 4644-133 : 2011 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Size 3 receptacle for rack and panel application. Product standard
EN 4644-133 : 2016 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Size 3 receptacle for rack and panel application, class C and D. Product Standard
EN 4644-141 : 2011 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Size 4 plug for rack and panel applications. Product standard
EN 4644-141 : 2016 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Size 4 plug for rack and panel applications, class C and D. Product standard
EN 4644-142 : 2012 ; Aerospace series. Connector, electrical and optical, rectangular,modular, rectangular inserts, operating temperature 175^DC (or 125^DC) continuous. Size 4 receptacle for rack and panel application. Product standard
EN 4644-201 : 2015 ; Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ^DC (or 125 ^DC) continuous. Locking and polarizing hardware. Product standard
EN 4645-002 : 2009 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Specification of performance and contact arrangements
EN 4645-003 : 2009 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Square flange receptacle. Product standard
EN 4645-004 : 2009 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Jam nut receptacle. Product standard
EN 4645-005 : 2009 ; Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Plug. Product standard
EN 4649 : 2009 ; Aerospace series. Handheld fire extinguishers with synthesis gases, for aircraft use. Technical specification and qualification conditions.
EN 4650 : 2010 ; Aerospace series. Wire and cable marking process, UV Laser.
EN 4651 : 2014 ; Aerospace series. Copper-clad aluminium alloy conductors for electrical cables. Product standard.
EN 4652-001 : 2015 ; Aerospace series. Connectors, coaxial, radio frequency. Technical specification
EN 4652-110 : 2015 ; Aerospace series. Connectors, coaxial, radio frequency. Type 1, BNC interface. Clamp nut assembly version. Straight plug. Product standard
EN 4652-111 : 2015 ; Aerospace series. Connectors, coaxial, radio frequency. Type 1, BNC interface. Clamp nut assembly version. Right angle plug. Product standard
EN 4652-112 : 2015 ; Aerospace series. Connectors, coaxial, radio frequency. Type 1, BNC interface. Clamp nut assembly version. Square flange receptacle. Product standard
EN 4652-113 : 2015 ; Aerospace series. Connectors, coaxial, radio frequency. Type 1, BNC interface. Clamp nut assembly version. Bulkhead receptacle. Product standard
EN 4652-211 : 2015 ; Aerospace series. Connectors, coaxial, radio frequency. Type 2, TNC interface. Clamp nut assembly version. Right angle plug. Product standard
EN 4652-212 : 2015 ; Aerospace series. Connectors, coaxial, radio frequency. Type 2, TNC interface. Clamp nut assembly version. Square flange receptacle. Product standard
EN 4652-310 : 2015 ; Aerospace series. Connectors, coaxial, radio frequency. Type 3, N interface. Clamp nut assembly version. Straight plug. Product standard
EN 4655 : 2010 ; Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D $3L 200 mm. Rm $3M 1400 MPa.
EN 4656 : 2010 ; Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D $3L 200 mm. Rm $3M 1520 MPa.
EN 4657 : 2010 ; Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D $3L 200 mm. Rm $3M 1650 MPa.
EN 4658 : 2010 ; Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 200 mm. R$dm $3M 1520 MPa.
EN 4659 : 2010 ; Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 200 mm. R$dm $3M 1650 MPa.
EN 4660-001 : 2011 ; Aerospace series. Modular and open avionics architectures. Architecture
EN 4660-002 : 2011 ; Aerospace series. Modular and open avionics architectures. Common functional modules
EN 4660-003 : 2011 ; Aerospace series. Modular and open avionics architectures. Communications/Network
EN 4660-004 : 2011 ; Aerospace series. Modular and open avionics architectures. Packaging
EN 4660-005 : 2011 ; Aerospace series. Modular and open avionics architectures. Software
EN 4662 : 2010 ; Aerospace series. Test specification for vibration control components.
EN 4670 : 2010 ; Aerospace series. Steel FEPM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D $3L 300 mm.
EN 4671 : 2010 ; Aerospace series. Steel FE-PM1506 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D $3L 200 mm. Rm $3M 1400 MPa.
EN 4672 : 2011 ; Aerospace series. Steel FE-PM1504 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D $3L 300 mm.
EN 4673-001 : 2010 ; Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Installation and removal procedure
EN 4673-002 : 2010 ; Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Design standard
EN 4673-003 : 2010 ; Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Technical specification
EN 4673-004 : 2010 ; Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. In heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plating
EN 4673-005 : 2010 ; Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating
EN 4673-006 : 2010 ; Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. In heat resisting steel FE-PA2601 (A286), MoS2 coated
EN 4674-001 : 2015 ; Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. Technical specification
EN 4674-002 : 2015 ; Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. General and list of product standard
EN 4674-003 : 2015 ; Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. Open sleeve. Inside pressurized area. EMI protection 5 kA . Temperature range. 65^DC to 200^DC. Product standard
EN 4674-004 : 2015 ; Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. Open sleeve. Outside pressurized area. EMI protection 10 kA. Temperature range -65 ^DC to 200 ^DC. Product standard
EN 4675 : 2011 ; Aerospace series. Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0;4Fe). Rm $3M 1 300 MPa. Bars. De $0L 110 mm.
EN 4677-001 : 2012 ; Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding. Quality of welded assemblies
EN 4678 : 2011 ; Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments.
EN 4681-001 : 2012 ; Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. Technical specification
EN 4681-002 : 2012 ; Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. General
EN 4681-005 : 2015 ; Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. AZ family, single, for use in low pressure atmosphere. Product standard
EN 4681-006 : 2015 ; Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. AZA family, single and multicore assembly, for use in low pressure atmosphere. Product standard
EN 4683 : 2011 ; Aerospace series. Steel FE-WM 3504 (X4CrNiMo16-5-1). Air melted. Filler metal for welding. Wire and rod.
EN 4685 : 2011 ; Aerospace series. Titanium Ti10V2Fe3Al. Bars. D $0L 110 mm. Rm $3M 1240 MPa.
EN 4686 : 2014 ; Aerospace series. Pipe coupling 8$0D30′ in titanium alloy. Equipped blind ferrules.
EN 4687 : 2012 ; Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application.
EN 4688 : 2012 ; Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application.
EN 4689 : 2012 ; Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application.
EN 4697 : 2012 ; Aerospace series. General and installation requirements for passenger seat fittings.
EN 4697 : 2016 ; Aerospace series. General and installation requirements for passenger seat fittings.
EN 4700-001 : 2010 ; Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Plate, sheet and strip
EN 4700-002 : 2010 ; Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Bar and section
EN 4700-002 : 2016 ; Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Bar and section
EN 4700-003 : 2010 ; Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Tube
EN 4700-004 : 2010 ; Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Wire
EN 4700-005 : 2010 ; Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Forging stock
EN 4700-006 : 2010 ; Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Pre-production and production forgings
EN 4700-007 : 2010 ; Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Remelting stock
EN 4701-001 : 2013 ; Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125^DC, for EN 4531-101 contacts. Technical specification
EN 4701-001 : 2014 ; Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 ^DC, for EN 4531-101 contacts. Technical specification
EN 4701-002 : 2013 ; Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 ^DC, for EN 4531-101 contacts. Material
EN 4701-002 : 2016 ; Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 ^DC, for EN 4531-101 contacts. Specification of performance
EN 4701-003 : 2013 ; Aerospace series. Connectors, optical, rectangular, modular,operating temperature 125^DC, for EN 4531-101 contacts. Module series 2 ; Product standard
EN 4704 : 2012 ; Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA).
EN 4707 : 2014 ; Aerospace series. Acid pickling of aluminum and aluminum alloy without hexavalent chromium.
EN 4708-001 : 2014 ; Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Technical specification
EN 4710-01 : 2015 ; Aerospace series. Quick release fastening systems for non-structural applications. Technical specification
EN 4710-02 : 2015 ; Aerospace series. Quick release fastening systems for non-structural applications. Spring clamp stud combination
EN 4710-03 : 2015 ; Aerospace series. Quick release fastening systems for non-structural applications. Spring clamp
EN 4710-04 : 2015 ; Aerospace series. Quick release fastening systems for non-structural applications. Spring clamp. One way tolerance compensation
EN 4710-05 : 2015 ; Aerospace series. Quick release fastening systems for non-structural applications. Spring clamp. Two ways tolerance compensation
EN 4710-06 : 2015 ; Aerospace series. Quick release fastening systems for non-structural applications. Stud. Quick-release and locking
EN 4710-07 : 2015 ; Aerospace series. Quick release fastening systems for non-structural applications. Retaining grommet
EN 4720 : 2014 ; Aerospace series. Steel X4CrNiMo16-5-1 (1;4418). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De $3L 200 mm. 1 150 MPa $3L Rm $3L 1 300 MPa.
EN 4721 : 2014 ; Aerospace series. Steel X4CrNiMo16-5-1 (1;4418). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De $3L 200 mm. 900 MPa $3L Rm $3L 1 050 MPa.
EN 4723 : 2015 ; Aerospace series. Standardized measurement methods for comfort and living space criteria for aircraft passenger seats.
EN 4725 : 2014 ; Aerospace series. Aluminium alloy AL-P2024- Al Cu4Mg1 ; T351 ; Plate. 6 mm $2J a $3L 150 mm.
EN 4726 : 2015 ; Aerospace series. Acceptance of the cosmetic variations in appearance of aircraft cabin parts.
EN 4800-001 : 2010 ; Aerospace series. Titanium and titanium alloys. Technical specification. Plate, sheet and strip
EN 4800-002 : 2010 ; Aerospace series. Titanium and titanium alloys. Technical specification. Bar and section
EN 4800-003 : 2010 ; Aerospace series. Titanium and titanium alloys. Technical specification. Tube
EN 4800-004 : 2010 ; Aerospace series. Titanium and titanium alloys. Technical specification. Wire
EN 4800-005 : 2010 ; Aerospace series. Titanium and titanium alloys. Technical specification. Forging stock
EN 4800-006 : 2010 ; Aerospace series. Titanium and titanium alloys. Technical specification. Pre-production and production forgings
EN 4800-007 : 2010 ; Aerospace series. Titanium and titanium alloys. Remelting stock
EN 4800-008 : 2010 ; Aerospace series. Titanium and titanium alloys. Technical specification. Pre-production and production castings
EN 4817 : 2012 ; Aerospace series. Passive UHF RFID tags intended for aircraft use.
EN 4818 : 2012 ; Aerospace series. Passive HF RFID tags intended for aircraft use.
EN 4819 : 2012 ; Aerospace series. Contact Memory Button (CMB) tags intended for aircraft use.
EN 4826 : 2014 ; Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength $3L 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners.
EN 6031 : 2015 ; Aerospace series. Fibre reinforced plastics. Test method. Determination of in-plane shear properties (± 45$0D tensile test).
EN 6032 : 2015 ; Aerospace series. Fibre reinforced plastics. Test method. Determination of the glass transition temperatures.
EN 6033 : 2015 ; Aerospace series. Carbon fibre reinforced plastics. Test method. Determination of interlaminar fracture toughness energy. Mode I. GIC.
EN 6034 : 2015 ; Aerospace series. Carbon fibre reinforced plastics. Test method. Determination of interlaminar fracture toughness energy. Mode II. GIIC.
EN 6035 : 2015 ; Aerospace series. Fibre reinforced plastics. Test method. Determination of notched and unnotched tensile strength.
EN 6036 : 2015 ; Aerospace series. Fibre reinforced plastics. Test method. Determination of notched, unnotched and filled hole compression strength.
EN 6037 : 2015 ; Aerospace series. Fibre reinforced plastics. Test method. Determination of bearing strength.
EN 6038 : 2015 ; Aerospace series. Fibre reinforced plastics. Test method. Determination of the compression strength after impact.
EN 6049-001 : 2015 ; Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Technical specification
EN 6049-002 : 2010 ; Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. General and list of product standards
EN 6049-003 : 2009 ; Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Braided, tubular, expandable. Product standard
EN 6049-005 : 2014 ; Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Sleeve flexible, post installation. Product standard
EN 6049-006 : 2012 ; Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres . Self-wrapping protective sleeve, flexible post installation. Product standard
EN 6049-007 : 2012 ; Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from -55^DC to 260^DC. Product standard
EN 6049-008 : 2013 ; Aerospace series. Electrical cables, installation. Protective sleeves in meta-aramid fibres. Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55^DC to 200^DC. Product standard
EN 6049-009 : 2016 ; Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 ^DC to 260 ^DC. Product standard
EN 6059-100 : 2011 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. General
EN 6059-100 : 2015 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. General
EN 6059-308 : 2014 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Rapid change of temperature
EN 6059-406 : 2014 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Vibration
EN 6059-501 : 2010 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Voltage proof test
EN 6059-502 : 2009 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Resistance to electrical arcs
EN 6059-502 : 2014 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Resistance to electrical arcs
EN 6059-503 : 2012 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise due to rated current injected on the sleeve
EN 6059-504 : 2014 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise within a loom due to self-heating when protected by a sleeve
EN 6059-601 : 2014 ; Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Open and close
EN 6069 : 2009 ; Aerospace series. Rivet, 100$0D reduced flush head, close tolerance. Inch series.
EN 6072 : 2010 ; Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing.
EN 6080 : 2016 ; Aerospace series. Rivet, 100$0D normal flush head, close tolerance. Inch series.
EN 6081 : 2016 ; Aerospace series. Rivet, universal head, close tolerance. Inch series.
EN 6092 : 2016 ; Aerospace series. Receptacle, floating, double lug.
EN 6094 : 2016 ; Aerospace series. Washer, spring, countersunk.
EN 6101 : 2016 ; Aerospace series. Rivet, 100$0D medium flush head, close tolerance. Inch series.
EN 6123 : 2016 ; Aerospace series. Fitting end, 24$0D internal cone, external thread, flareless type. Extra fine thread pitch. Inch series. Design standard.
EN 6129 : 2016 ; Aerospace series. Blind bolt, protruding head, high strength, pulltype.
EN 9100 : 2009 ; Quality Management Systems. Requirements for Aviation, Space and Defense Organizations.
EN 9101 : 2008 ; Aerospace series. Quality management systems. Assessment (based on ISO 9001 : 2000).
EN 9101 : 2011 ; Quality management systems. Audit requirements for aviation, space, and defence organizations.
EN 9101 : 2015 ; Quality Management Systems. Audit Requirements for Aviation, Space, and Defence Organisations.
EN 9102 : 2006 ; Aerospace series. Quality systems. First article inspection.
EN 9102 : 2015 ; Aerospace series. Quality systems. First article inspection requirements.
EN 9103 : 2005 ; Aerospace series. Quality management systems. Variation management of key characteristics.
EN 9103 : 2014 ; Aerospace series. Quality management systems. Variation management of key characteristics.
EN 9104-001 : 2013 ; Aerospace series. Quality management systems. Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
EN 9104-002 : 2008 ; Aerospace series. Quality management systems. Requirements for oversight of aerospace quality management system certification/registrations programs
EN 9104-002 : 2016 ; Aerospace series. Quality management systems. Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
EN 9104-003 : 2009 ; Aerospace series. Quality management systems. Requirements for aerospace quality management system (AQMS) auditor training and qualification
EN 9104-003 : 2010 ; Aerospace series. Quality management systems. Requirements for aerospace quality management system (AQMS) auditor training and qualification
EN 9104 : 2006 ; Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs.
EN 9110 : 2005 ; Aerospace series. Quality systems. Model for quality assurance applicable to maintenance organizations.
EN 9110 : 2010 ; Quality management systems. Requirements for aviation maintenance organizations.
EN 9110 : 2015 ; Quality Management Systems. Requirements for Aviation Maintenance Organizations.
EN 9111 : 2005 ; Aerospace series. Quality management systems. Assessment applicable to maintenance organizations.
EN 9114 : 2015 ; Aerospace series. Quality systems. Direct Ship Guidance for Aerospace Companies.
EN 9115 : 2013 ; Quality Management Systems. Requirements for Aviation, Space and Defense Organizations. Deliverable Software (Supplement to EN 9100).
EN 9116 : 2015 ; Aerospace series. Notice of Change (NOC) Requirements.
EN 9120 : 2005 ; Aerospace series. Quality management systems. Requirements for stockist distributors.
EN 9120 : 2010 ; Quality management systems. Requirements for aviation, space and defence distributors.
EN 9121 : 2005 ; Aerospace series. Quality management systems. Assessment applicable to stockist distributors.
EN 9121 : 2009 ; Aerospace series. Quality management systems. Assessment applicable to stockist distributors.
EN 9131 : 2009 ; Aerospace series. Quality management systems. Nonconformance documentation.
EN 9131 : 2016 ; Aerospace series. Quality Management Systems. Nonconformance Data Definition and Documentation.
EN 9132 : 2006 ; Aerospace series. Quality management systems. Data matrix quality requirements for parts marking.
EN 9137 : 2012 ; Quality management systems. Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System.
EN 9200 : 2004 ; Programme management. Guidelines for project management specification.
EN 9239 : 2016 ; Aerospace series. Programme Management. Guide for the risk management.
EN 9277 : 2015 ; Aerospace series. Programme Management. Guide for the management of Systems Engineering.
EN 9300-003 : 2012 ; Aerospace series. LOTAR. Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data. Fundamentals and concepts
EN 9300-004 : 2013 ; Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Description methods
EN 9300-011 : 2013 ; Aerospace series. LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Reference process description “Data preparation”
EN 9300-012 : 2013 ; Aerospace series. LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Reference process description ”Ingest”
EN 9300-013 : 2013 ; Aerospace series. LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Reference process description “Archival Storage”
EN 9300-014 : 2013 ; Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Reference process description “Retrieval”
EN 9300-015 : 2013 ; Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Reference process description “Removal”
EN 9320 : 2014 ; Aerospace series. Programme Management. General guidelines for acquisition and supply of open systems.
EN 10001 : 1991 ; Definition and classification of pig-irons.
EN 10002-1 : 1990 ; Tensile testing of metallic materials. Method of test at ambient temperature
EN 10002-2 : 1992 ; Tensile testing of metallic materials. Verification of the force measuring system of the tensile testing machine
EN 10002-3 : 1995 ; Tensile testing of metallic materials. Calibration of force proving instruments used for the verification of uniaxial testing machines
EN 10002-4 : 1995 ; Tensile testing of metallic materials. Verification of extensometers used in uniaxial testing
EN 10002-5 : 1992 ; Tensile testing of metallic materials. Method of test at elevated temperatures
EN 10003-1 : 1995 ; Metallic materials. Brinell hardness test. Test method
EN 10003-2 : 1995 ; Metallic materials. Brinell hardness test. Verification of Brinell hardness testing machines
EN 10003-3 : 1995 ; Metallic materials. Brinell hardness test. Calibration of standardized blocks to be used for Brinell hardness testing machines
EN 10016-1 : 1995 ; Non-alloy steel rods for drawing and/or cold rolling. General requirements
EN 10016-2 : 1995 ; Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for general purpose rod
EN 10016-3 : 1995 ; Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rimmed and rimmed substitute low carbon steel rod
EN 10016-4 : 1995 ; Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rod for special applications
EN 10020 : 1991 ; Definition and classification of grades of steel.
EN 10020 : 2000 ; Definition and classification of grades of steel.
EN 10021 : 1993 ; General technical delivery requirements for steel and iron products.
EN 10021 : 2006 ; General technical delivery conditions for steel products.
EN 10024 : 1995 ; Hot rolled taper flange I sections. Tolerances on shape and dimensions.
EN 10025 : 1990 ; Specification for hot rolled products of non-alloy structural steels and their technical delivery conditions.
EN 10025 : 1993 ; Hot rolled products of non-alloy structural steels. Technical delivery conditions.
EN 10027-1 : 1992 ; Designation systems for steel. Steel names, principal symbols
EN 10027-1 : 2005 ; Designation system for steels. Steel names
EN 10027-1 : 2016 ; Designation systems for steels. Steel names
EN 10027-2 : 1992 ; Designation systems for steels.. Steel numbers
EN 10027-2 : 2015 ; Designation systems for steels. Numerical system
EN 10028-1 : 1993 ; Specification for flat products made of steels for pressure purposes. General requirements
EN 10028-1 : 2000 ; Specification for flat products made of steels for pressure purposes. General requirements
EN 10028-1 : 2007+A1 : 2009 ; Flat products made of steels for pressure purposes. General requirements
EN 10028-2 : 1993 ; Specification for flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-2 : 2009 ; Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3 : 1993 ; Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
EN 10028-3 : 2009 ; Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
EN 10028-4 : 1995 ; Specification for flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
EN 10028-4 : 2009 ; Flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
EN 10028-5 : 1997 ; Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
EN 10028-5 : 2009 ; Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
EN 10028-6 : 1997 ; Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
EN 10028-6 : 2009 ; Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
EN 10028-7 : 2000 ; Flat products made of steels for pressure purposes. Stainless steels
EN 10028-7 : 2007 ; Flat products made of steels for pressure purposes. Stainless steels
EN 10028-7 : 2016 ; Flat products made of steels for pressure purposes. Stainless steels
EN 10029 : 1991 ; Specification for tolerances on dimensions, shape and mass for hot rolled steel plates 3 mm thick or above.
EN 10029 : 2010 ; Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape.
EN 10034 : 1993 ; Structural steel I and H sections. Tolerances on shape and dimensions.
EN 10036 : 1991 ; Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen.
EN 10045-1 : 1990 ; Charpy impact test on metallic materials. Test method (V- and U-notches)
EN 10045-2 : 1993 ; Charpy impact test on metallic materials. Method for the verification of impact testing machines
EN 10048 : 1997 ; Hot rolled narrow steel strip. Tolerances on dimensions and shape.
EN 10049 : 2005 ; Measurement of roughness average. Ra and peak count RPc on metallic flat products.
EN 10049 : 2013 ; Measurement of roughness average $iR$ia and peak count $iR$iP$ic on metallic flat products.
EN 10051 : 1991+A1 : 1997 ; Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels. Tolerances on dimensions and shape.
EN 10051 : 2010 ; Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape.
EN 10052 : 1994 ; Vocabulary of heat treatment terms for ferrous products.
EN 10055 : 1996 ; Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions.
EN 10056-1 : 1999 ; Specification for structural steel equal and unequal angles. Dimensions
EN 10056-2 : 1993 ; Specification for structural steel equal and unequal angles. Tolerances on shape and dimensions
EN 10067 : 1997 ; Hot rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass.
EN 10071 : 1991 ; Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method.
EN 10071 : 2012 ; Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method.
EN 10080 : 2005 ; Steel for the reinforcement of concrete. Weldable reinforcing steel. General.
EN 10083-1 : 1991 ; Quenched and tempered steels. Technical delivery conditions for special steels
EN 10083-1 : 2006 ; Steels for quenching and tempering. General technical delivery conditions
EN 10083-2 : 1991 ; Quenched and tempered steels. Technical delivery conditions for unalloyed quality steels
EN 10083-2 : 2006 ; Steels for quenching and tempering. Technical delivery conditions for non alloy steels
EN 10083-3 : 1996 ; Quenched and tempered steels. Technical delivery conditions for boron steels
EN 10083-3 : 2006 ; Steels for quenching and tempering. Technical delivery conditions for alloy steels
EN 10084 : 1998 ; Case hardening steels. Technical delivery conditions.
EN 10084 : 2008 ; Case hardening steels. Technical delivery conditions.
EN 10085 : 2001 ; Nitriding steel. Technical delivery conditions.
EN 10087 : 1999 ; Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods.
EN 10088-1 : 1995 ; Stainless steels. List of stainless steels
EN 10088-1 : 2005 ; Stainless steels. List of stainless steels
EN 10088-1 : 2014 ; Stainless steels. List of stainless steels
EN 10088-2 : 1995 ; Stainless steels. Technical delivery conditions for sheet/plate and strip for general purposes
EN 10088-2 : 2005 ; Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-2 : 2014 ; Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3 : 1995 ; Stainless steels. Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes
EN 10088-3 : 2005 ; Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-3 : 2014 ; Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-4 : 2009 ; Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10088-5 : 2009 ; Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10090 : 1998 ; Valve steels and alloys for internal combustion engines.
EN 10106 : 1996 ; Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state.
EN 10106 : 2007 ; Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state.
EN 10106 : 2015 ; Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state.
EN 10107 : 1996 ; Grain-oriented electrical steel sheet and strip delivered in the fully processed state.
EN 10107 : 2005 ; Grain-oriented electrical steel sheet and strip delivered in the fully processed state.
EN 10107 : 2014 ; Grain-oriented electrical steel strip and sheet delivered in the fully processed state.
EN 10109-1 : 1996 ; Metallic materials. Hardness test. Rockwell test (scales A, B, C, D, E, F, G, H, K) and Rockwell superficial test (scales 15 N, 30 N, 45 N, 15 T, 30 T and 45 T)
EN 10109-2 : 1996 ; Metallic materials. Hardness test. Verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
EN 10109-3 : 1996 ; Metallic materials. Hardness test. Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
EN 10111 : 1998 ; Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions.
EN 10111 : 2008 ; Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions.
EN 10113-1 : 1993 ; Hot-rolled products in weldable fine grain structural steels. General delivery conditions
EN 10113-2 : 1993 ; Hot-rolled products in weldable fine grain structural steels. Delivery conditions for normalized/normalized rolled steels
EN 10113-3 : 1993 ; Hot-rolled products in weldable fine grain structural steels. Delivery conditions for thermomechanical rolled steels
EN 10120 : 1997 ; Steel sheet and strip for welded gas cylinders.
EN 10120 : 2008 ; Steel sheet and strip for welded gas cylinders.
EN 10126 : 1996 ; Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state.
EN 10130 : 1991 ; Specification for cold rolled low carbon steel flat products for cold forming : technical delivery conditions.
EN 10130 : 1999 ; Cold-rolled low-carbon steel flat products for cold forming. Technical delivery conditions.
EN 10130 : 2006 ; Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions.
EN 10131 : 1991 ; Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape.
EN 10131 : 2006 ; Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape.
EN 10132-1 : 2000 ; Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. General
EN 10132-2 : 2000 ; Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Case hardening steels
EN 10132-3 : 2000 ; Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Steels for quenching and tempering
EN 10132-4 : 2000 ; Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Spring steels and other applications
EN 10136 : 1991 ; Chemical analysis of ferrous materials. Determination of nickel in steels and irons. Flame atomic absorption spectrometric method.
EN 10137-1 : 1996 ; Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. General delivery conditions
EN 10137-2 : 1996 ; Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels
EN 10137-3 : 1996 ; Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for precipitation hardened steels
EN 10139 : 1998 ; Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions.
EN 10139 : 2016 ; Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions.
EN 10140 : 1997 ; Cold rolled narrow steel strip. Tolerances on dimensions and shape.
EN 10140 : 2006 ; Cold rolled narrow steel strip. Tolerances on dimensions and shape.
EN 10142 : 2000 ; Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions.
EN 10143 : 1993 ; Continuously hot-dip metal coated steel sheet and strip. Tolerances on dimensions and shape.
EN 10143 : 2006 ; Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape.
EN 10147 : 1992 ; Specification for continuously hot-dip zinc coated structural steel sheet and strip. Technical delivery conditions.
EN 10147 : 2000 ; Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions.
EN 10149-1 : 1996 ; Specification for hot-rolled flat products made of high yield strength steels for cold forming. General delivery conditions
EN 10149-1 : 2013 ; Hot rolled flat products made of high yield strength steels for cold forming. General technical delivery conditions
EN 10149-2 : 1996 ; Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels
EN 10149-2 : 2013 ; Hot rolled flat products made of high yield strength steels for cold forming. Technical delivery conditions for thermomechanically rolled steels
EN 10149-3 : 1996 ; Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steels
EN 10149-3 : 2013 ; Hot rolled flat products made of high yield strength steels for cold forming. Technical delivery conditions for normalized or normalized rolled steels
EN 10152 : 1994 ; Specification for electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions.
EN 10152 : 2009 ; Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions.
EN 10154 : 1996 ; Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions.
EN 10155 : 1993 ; Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions.
EN 10160 : 1999 ; Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method).
EN 10163-1 : 1991 ; Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. General requirements
EN 10163-2 : 1991 ; Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. Plates and wide flats
EN 10163-3 : 1991 ; Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. Sections
EN 10164 : 1993 ; Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions.
EN 10165 : 1996 ; Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state.
EN 10169-1 : 1997 ; Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods)
EN 10169-2 : 2006 ; Continuously organic coated (coil coated) steel flat products. Products for building exterior applications
EN 10169 : 2010+A1 : 2012 ; Continuously organic coated (coil coated) steel flat products. Technical delivery conditions.
EN 10184 : 1992 ; Specification for chemical analysis of ferrous materials. Determination of phosphorus in steels and irons. Spectrophotometric method.
EN 10184 : 2006 ; Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method.
EN 10200 : 1992 ; Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method.
EN 10200 : 2012 ; Chemical analysis of ferrous materials. Determination of boron in steels. Spectrophotometric method.
EN 10202 : 1990 ; Specification for cold reduced electrolytic chromium/chromium oxide coated steel.
EN 10202 : 2001 ; Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel.
EN 10203 : 1991 ; Specification for cold reduced electrolytic tinplate.
EN 10204 : 1991 ; Metallic products. Types of inspection documents.
EN 10205 : 1992 ; Specification for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel.
EN 10205 : 2016 ; Cold reduced tinmill products. Blackplate.
EN 10207 : 1992 ; Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars.
EN 10207 : 2005 ; Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars.
EN 10208-1 : 1998 ; Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
EN 10208-1 : 2009 ; Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
EN 10208-2 : 1997 ; Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
EN 10208-2 : 2009 ; Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
EN 10209 : 1996 ; Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions.
EN 10209 : 2013 ; Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions.
EN 10210-1 : 1994 ; Hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
EN 10210-1 : 2006 ; Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
EN 10210-2 : 1997 ; Hot finished structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties
EN 10210-2 : 2006 ; Hot finished structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
EN 10211 : 1996 ; Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method.
EN 10211 : 2013 ; Chemical analysis of ferrous materials. Determination of titanium in steels and cast irons. Flame atomic absorption spectrometric method.
EN 10212 : 1996 ; Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method.
EN 10213-1 : 1996 ; Technical delivery conditions for steel castings for pressure purposes. General
EN 10213-2 : 1996 ; Technical delivery conditions for steel castings for pressure purposes. Steel grades for use at room temperature and at elevated temperature
EN 10213-3 : 1996 ; Technical delivery conditions for steel castings for pressure purposes. Steels for use at low temperatures
EN 10213-4 : 1996 ; Technical delivery conditions for steel castings for pressure purposes. Austenitic and austenitic-ferritic steel grades
EN 10213 : 2007+A1 : 2016 ; Steel castings for pressure purposes.
EN 10214 : 1995 ; Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions.
EN 10215 : 1995 ; Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions.
EN 10216-1 : 2013 ; Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
EN 10216-2 : 2013 ; Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3 : 2013 ; Seamless steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
EN 10216-4 : 2013 ; Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-5 : 2013 ; Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10217-7 : 2005 ; Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10217-7 : 2014 ; Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10218-1 : 1994 ; Steel wire and wire products. General.. Test methods
EN 10218-1 : 2012 ; Steel wire and wire products. General. Test methods
EN 10218-2 : 1997 ; Steel wire and wire products. General. Wire dimensions and tolerances
EN 10218-2 : 2012 ; Steel wire and wire products. General. Wire dimensions and tolerances
EN 10219-1 : 1997 ; Cold formed welded structural sections of non-alloy and fine grain steels. Technical delivery requirements
EN 10219-1 : 2006 ; Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
EN 10219-2 : 1997 ; Cold formed welded structural sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
EN 10219-2 : 2006 ; Cold formed welded structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
EN 10221 : 1996 ; Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions.
EN 10222-1 : 1998 ; Steel forgings for pressure purposes. General requirements for open die forgings
EN 10222-2 : 2000 ; Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
EN 10222-3 : 1999 ; Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
EN 10222-4 : 1999 ; Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
EN 10222-5 : 2000 ; Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10223-1 : 1998 ; Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire
EN 10223-1 : 2012 ; Steel wire and wire products for fencing and netting. Zinc and zinc-alloy coated steel barbed wire
EN 10223-2 : 1998 ; Steel wire and wire products for fences. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
EN 10223-2 : 2012 ; Steel wire and wire products for fencing and netting. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
EN 10223-3 : 1998 ; Steel wire and wire products for fences. Hexagonal steel wire netting for engineering purposes
EN 10223-3 : 2013 ; Steel wire and wire products for fencing and netting. Hexagonal steel wire mesh products for civil engineering purposes
EN 10223-4 : 1998 ; Steel wire and wire products for fences. Steel wire welded mesh fencing
EN 10223-4 : 2012 ; Steel wire and wire products for fencing and netting. Steel wire welded mesh fencing
EN 10223-5 : 1998 ; Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing
EN 10223-5 : 2012 ; Steel wire and wire products for fencing and netting. Steel wire woven hinged joint and knotted mesh fencing
EN 10223-6 : 1998 ; Steel wire and wire products for fences. Steel wire chain link fencing
EN 10223-6 : 2012 ; Steel wire and wire products for fencing and netting. Steel wire chain link fencing
EN 10223-7 : 2012 ; Steel wire and wire products for fencing and netting. Steel wire welded panels for fencing
EN 10223-8 : 2013 ; Steel wire and wire products for fencing and netting. Welded mesh gabion products
EN 10225 : 2009 ; Weldable structural steels for fixed offshore structures. Technical delivery conditions.
EN 10226-2 : 2005 ; Pipe threads where pressure tight joints are made on the threads. Taper external threads and taper internal threads. Dimensions, tolerances and designation
EN 10226-3 : 2005 ; Pipes threads where pressure-tight joints are made on the threads. Verification by means of limit gauges
EN 10228-1 : 1999 ; Non-destructive testing of steel forgings. Magnetic particle inspection
EN 10228-1 : 2016 ; Non-destructive testing of steel forgings. Magnetic particle inspection
EN 10228-2 : 1998 ; Non-destructive testing of steel forgings. Penetrant testing
EN 10228-2 : 2016 ; Non-destructive testing of steel forgings. Penetrant testing
EN 10228-3 : 1998 ; Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-3 : 2016 ; Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4 : 1999 ; Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 10228-4 : 2016 ; Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 10229 : 1998 ; Evaluation of resistance of steel products to hydrogen induced cracking (HIC).
EN 10230-1 : 2000 ; Steel wire nails. Loose nails for general applications
EN 10232 : 1994 ; Metallic materials. Tube (in full section). Bend test.
EN 10233 : 1994 ; Metallic materials. Tube. Flattening test.
EN 10234 : 1994 ; Metallic materials. Tube. Drift expanding test.
EN 10236 : 1994 ; Metallic materials. Tube. Ring expanding test.
EN 10237 : 1994 ; Metallic materials. Tube. Ring tensile test.
EN 10238 : 1997 ; Automatically blast cleaned and automatically primed structural steel products.
EN 10238 : 2009 ; Automatically blast-cleaned and automatically prefabrication primed structural steel products.
EN 10240 : 1998 ; Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants.
EN 10242 : 1995 ; Threaded pipe fittings in malleable cast iron.
EN 10243-1 : 1999 ; Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
EN 10243-2 : 1999 ; Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
EN 10244-1 : 2001 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
EN 10244-1 : 2009 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
EN 10244-2 : 2001 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
EN 10244-2 : 2009 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
EN 10244-3 : 2001 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Aluminium coatings
EN 10244-4 : 2001 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Tin coatings
EN 10244-5 : 2001 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
EN 10244-6 : 2001 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass coatings
EN 10245-1 : 2001 ; Steel wire and wire products. Organic coatings on steel wire. General rules
EN 10245-1 : 2011 ; Steel wire and wire products. Organic coatings on steel wire. General rules
EN 10245-2 : 2001 ; Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
EN 10245-2 : 2011 ; Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
EN 10245-3 : 2001 ; Steel wire and wire products. Organic coatings on steel wire. PE coated wire
EN 10245-3 : 2011 ; Steel wire and wire products. Organic coatings on steel wire. PE coated wire
EN 10245-4 : 2011 ; Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
EN 10245-5 : 2011 ; Steel wire and wire products. Organic coatings on steel wire. Polyamide coated wire
EN 10246-1 : 1996 ; Non-destructive testing of steel tubes. Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
EN 10246-2 : 2000 ; Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
EN 10246-3 : 2000 ; Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
EN 10246-4 : 2000 ; Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
EN 10246-5 : 2000 ; Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
EN 10246-6 : 2000 ; Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
EN 10246-7 : 1996 ; Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections
EN 10246-7 : 2005 ; Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
EN 10246-8 : 2000 ; Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
EN 10246-9 : 2000 ; Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
EN 10246-10 : 2000 ; Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
EN 10246-11 : 2000 ; Non-destructive testing of steel tubes. Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
EN 10246-12 : 2000 ; Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
EN 10246-13 : 2000 ; Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
EN 10246-14 : 2000 ; Non-destructive testing of steel tubes. Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
EN 10246-15 : 2000 ; Non-destructive testing of steel tubes. Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
EN 10246-16 : 2000 ; Non-destructive testing of steel tubes. Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
EN 10246-17 : 2000 ; Non-destructive testing of steel tubes. Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
EN 10246-18 : 2000 ; Non-destructive testing of steel tubes. Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
EN 10247 : 2007 ; Micrographic examination of the non-metallic inclusion content of steels using standard pictures.
EN 10248-1 : 1996 ; Hot rolled sheet piling of non alloy steels. Technical delivery conditions
EN 10248-2 : 1996 ; Hot rolled sheet piling of non alloy steels. Tolerances on shape and dimensions
EN 10249-1 : 1996 ; Cold formed sheet piling of non alloy steels. Technical delivery conditions
EN 10249-2 : 1996 ; Cold formed sheet piling of non alloy steels. Tolerances on shape and dimensions
EN 10250-1 : 1999 ; Open steel die forgings for general engineering purposes. General requirements
EN 10250-2 : 2000 ; Open steel die forgings for general engineering purposes. Non-alloy quality and special steels
EN 10250-3 : 2000 ; Open steel die forgings for general engineering purposes. Alloy special steels
EN 10250-4 : 2000 ; Open steel die forgings for general engineering purposes. Stainless steels
EN 10251 : 1997 ; Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip.
EN 10251 : 2015 ; Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip.
EN 10252 : 1997 ; Magnetic materials. Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies.
EN 10253-1 : 1999 ; Butt-welding pipe fittings. Wrought carbon steel for general use and without specific inspection requirements
EN 10253-2 : 2007 ; Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements
EN 10253-3 : 2008 ; Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 10253-4 : 2008 ; Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10254 : 1999 ; Steel closed die forgings. General technical delivery conditions.
EN 10256 : 2000 ; Non-destructive testing on steel tubes. Qualification and competence of level 1 and level 2 non-destructive testing personnel.
EN 10257-1 : 1998 ; Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Land cables
EN 10257-1 : 2011 ; Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Land cables
EN 10257-2 : 1998 ; Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Submarine cables
EN 10257-2 : 2011 ; Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Submarine cables
EN 10258 : 1997 ; Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape.
EN 10259 : 1997 ; Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape.
EN 10264-1 : 2012 ; Steel wire and wire products. Steel wire for ropes. General requirements
EN 10264-2 : 2012 ; Steel wire and wire products. Steel wire for ropes. Cold drawn non alloy steel wire for ropes for general applications
EN 10264-3 : 2012 ; Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications
EN 10264-4 : 2012 ; Steel wire and wire products. Steel wire for ropes. Stainless steel wire
EN 10265 : 1996 ; Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability.
EN 10267 : 1998 ; Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures.
EN 10268 : 1999 ; Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming. General delivery conditions.
EN 10268 : 2006+A1 : 2013 ; Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions.
EN 10269 : 1999+A1 : 2006 ; Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.
EN 10269 : 2013 ; Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.
EN 10270-1 : 2001 ; Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
EN 10270-1 : 2011 ; Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
EN 10270-2 : 2011 ; Steel wire for mechanical springs. Oil hardened and tempered spring steel wire
EN 10270-3 : 2001 ; Steel wire for mechanical springs. Stainless spring steel wire
EN 10270-3 : 2011 ; Steel wire for mechanical springs. Stainless spring steel wire
EN 10271 : 1999 ; Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions.
EN 10272 : 2000 ; Stainless steel bars for pressure purposes.
EN 10272 : 2007 ; Stainless steel bars for pressure purposes.
EN 10272 : 2016 ; Stainless steel bars for pressure purposes.
EN 10273 : 2000 ; Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.
EN 10273 : 2007 ; Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.
EN 10273 : 2016 ; Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.
EN 10274 : 1999 ; Metallic materials. Drop weight tear test.
EN 10275 : 1999 ; Metallic materials. Tube ring hydraulic pressure test.
EN 10276-1 : 2000 ; Chemical analysis of ferrous materials. Determination of oxygen in steel and iron. Sampling and preparation of steel samples for oxygen determination
EN 10277-1 : 1999 ; Bright steel products. Technical delivery conditions. General
EN 10277-1 : 2008 ; Bright steel products. Technical delivery conditions. General
EN 10277-2 : 1999 ; Bright steel products. Technical delivery conditions. Steels for general engineering purposes
EN 10277-2 : 2008 ; Bright steel products. Technical delivery conditions. Steels for general engineering purposes
EN 10277-3 : 1999 ; Bright steel products. Technical delivery conditions. Free cutting steels
EN 10277-3 : 2008 ; Bright steel products. Technical delivery conditions. Free-cutting steels
EN 10277-4 : 1999 ; Bright steel products. Technical delivery conditions. Case-hardening steels
EN 10277-4 : 2008 ; Bright steel products. Technical delivery conditions. Case hardening steels
EN 10277-5 : 1999 ; Bright steel products. Technical delivery conditions. Steels for quenching and tempering
EN 10277-5 : 2008 ; Bright steel products. Technical delivery conditions. Steels for quenching and tempering
EN 10278 : 1999 ; Dimensions and tolerances of bright steel products.
EN 10279 : 2000 ; Hot rolled steel channels. Tolerances on shape, dimension and mass.
EN 10280 : 2001+A1 : 2007 ; Magnetic materials. Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester.
EN 10282 : 2001 ; Magnetic materials. Method of test for the determination of surface insulation resistance of electrical sheet and strip.
EN 10284 : 2000 ; Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems.
EN 10291 : 2000 ; Metallic materials. Uniaxial creep testing in tension. Methods of test.
EN 10292 : 2000 ; Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming. Technical delivery conditions.
EN 10292 : 2007 ; Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming. Technical delivery conditions.
EN 10293 : 2005 ; Steel castings for general engineering uses.
EN 10293 : 2015 ; Steel castings. Steel castings for general engineering uses.
EN 10294-1 : 2005 ; Hollow bars for machining. Technical delivery conditions. Non alloy and alloy steels
EN 10294-2 : 2012 ; Hollow bars for machining. Technical delivery conditions. Stainless steels with specified machinability properties
EN 10296-2 : 2005 ; Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Stainless steel
EN 10297-2 : 2005 ; Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Stainless steel
EN 10298 : 2005 ; Steel tubes and fittings for onshore and offshore pipelines. Internal lining with cement mortar.
EN 10300 : 2005 ; Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating.
EN 10302 : 2008 ; Creep resisting steels, nickel and cobalt alloys.
EN 10303 : 2015 ; Thin magnetic steel strip and sheet for use at medium frequencies.
EN 10305-1 : 2010 ; Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
EN 10305-1 : 2016 ; Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
EN 10305-2 : 2016 ; Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes
EN 10305-3 : 2016 ; Steel tubes for precision applications. Technical delivery conditions. Welded cold sized tubes
EN 10305-4 : 2011 ; Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 10305-4 : 2016 ; Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 10305-5 : 2016 ; Steel tubes for precision applications. Technical delivery. Welded cold sized square and rectangular tubes
EN 10305-6 : 2005 ; Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes for hydraulic and pneumatic power systems
EN 10305-6 : 2016 ; Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes for hydraulic and pneumatic power systems
EN 10311 : 2005 ; Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids.
EN 10314 : 2016 ; Method for the derivation of minimum values of proof strength of steel at elevated temperatures.
EN 10315 : 2006 ; Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique.
EN 10318 : 2005 ; Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method.
EN 10319-2 : 2006 ; Metallic materials. Tensile stress relaxation testing. Procedure for bolted joint models
EN 10324 : 2004 ; Steel wire and wire products. Hose reinforcement wire.
EN 10325 : 2006 ; Steel. Determination of yield strength increase by the effect of heat treatment (Bake-Hardening-Index).
EN 10328 : 2005 ; Iron and steel. Determination of the conventional depth and hardening after surface heating.
EN 10329 : 2006 ; Steel tubes and fittings for onshore and offshore pipelines. External field joint coatings.
EN 10330 : 2015 ; Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open magnetic circuit.
EN 10333 : 2005 ; Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Tin coated steel (tinplate).
EN 10334 : 2005 ; Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption. Non-coated steel (blackplate).
EN 10335 : 2005 ; Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Non alloyed electrolytic chromium/chromium oxide coated steel.
EN 10336 : 2007 ; Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions.
EN 10339 : 2007 ; Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection.
EN 10341 : 2006 ; Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state.
EN 10342 : 2005 ; Magnetic materials. Classification of surface insulations of electrical steel sheet, strip and laminations.
EN 10343 : 2009 ; Steels for quenching and tempering for construction purposes. Technical delivery conditions.
EN 10346 : 2009 ; Continuously hot-dip coated steel flat products. Technical delivery conditions.
EN 10349 : 2009 ; Steel castings. Austenitic manganese steel castings.
EN 10351 : 2011 ; Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method].
EN 10355 : 2013 ; Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method].
EN 10357 : 2013 ; Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry.
EN 10361 : 2015 ; Alloyed steels. Determination of nickel content. Inductively coupled plasma optical emission spectrometric method.
EN 10363 : 2016 ; Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip. Tolerances on dimensions and shape.
EN 12001 : 2012 ; Conveying, spraying and placing machines for concrete and mortar. Safety requirements.
EN 12002 : 1998 ; Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts.
EN 12002 : 2008 ; Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts.
EN 12003 : 1998 ; Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives.
EN 12003 : 2008 ; Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives.
EN 12004 : 2007+A1 : 2012 ; Adhesives for tiles. Requirements, evaluation of conformity, classification and designation .
EN 12006-1 : 1999 ; Non-active surgical implants. Particular requirements for cardiac and vascular implants. Heart valve substitutes
EN 12006-2 : 1998+A1 : 2009 ; Non active surgical implants. Particular requirements for cardiac and vascular implants. Vascular prostheses including cardiac valve conduits
EN 12006-3 : 1998+A1 : 2009 ; Non active surgical implants. Particular requirements for cardiac and vascular implants. Endovascular devices
EN 12007-1 : 2000 ; Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. General functional recommendations
EN 12007-1 : 2012 ; Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. General functional requirements
EN 12007-2 : 2000 ; Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for polyethylene (MOP up to and including 10 bar)
EN 12007-2 : 2012 ; Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional requirements for polyethylene (MOP up to and including 10 bar)
EN 12007-3 : 2000 ; Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for steel
EN 12007-3 : 2015 ; Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional requirements for steel
EN 12007-4 : 2000 ; Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for renovation
EN 12007-4 : 2012 ; Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional requirements for renovation
EN 12007-5 : 2014 ; Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Service lines. Specific functional requirements
EN 12010 : 1998 ; Non-active surgical implants. Joint replacement implants. Particular requirements.
EN 12011 : 1998 ; Instrumentation to be used in association with non-active surgical implants. General requirements.
EN 12012-1 : 2000 ; Rubber and plastics machines. Size reduction machines. Safety requirements for blade granulators
EN 12012-1 : 2007+A1 : 2008 ; Plastics and rubber machines. Size reduction machines. Safety requirements for blade granulators
EN 12012-3 : 2001+A1 : 2008 ; Rubber and plastics machines. Size reduction machines. Safety requirements for shredders
EN 12012-4 : 2006+A1 : 2008 ; Plastics and rubber machines. Size reduction machines. Safety requirements for agglomerators
EN 12013 : 2000+A1 : 2008 ; Plastics and rubber machines. Internal mixers. Safety requirements.
EN 12014-3 : 2005 ; Foodstuffs. Determination of nitrate and/or nitrite content. Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite
EN 12014-4 : 2005 ; Foodstuffs. Determination of nitrate and/or nitrite content. Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of meat products
EN 12014-7 : 1998 ; Foodstuffs. Determination of nitrate and/or nitrite content. Continuous flow method for the determination of nitrate content of vegetables and vegetable products after cadmium reduction
EN 12015 : 1998 ; Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Emission.
EN 12015 : 2004 ; Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission.
EN 12015 : 2014 ; Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission.
EN 12016 : 1998 ; Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Immunity.
EN 12016 : 2004+A1 : 2008 ; Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity.
EN 12016 : 2013 ; Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity.
EN 12019 : 1998 ; Zinc and zinc alloys. Optical emission spectrometric analysis.
EN 12020-1 : 2008 ; Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 ; Technical conditions for inspection and delivery
EN 12020-2 : 2008 ; Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 ; Tolerances on dimensions and form
EN 12020-2 : 2016 ; Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 ; Tolerances on dimensions and form
EN 12021 : 1999 ; Respiratory protective devices. Compressed air for breathing apparatus.
EN 12021 : 2014 ; Respiratory equipment. Compressed gases for breathing apparatus.
EN 12023 : 1997 ; Self adhesive tapes. Measurement of water vapour transmission in a warm humid atmosphere.
EN 12024 : 1997 ; Self adhesive tapes. Measurement of resistance to elevated temperature and humidity.
EN 12025 : 1997 ; Self adhesive tapes. Measurement of tear resistance by the pendulum method.
EN 12026 : 1997 ; Self adhesive tapes. Measurement of the unwinding force at high speed.
EN 12027 : 1997 ; Self adhesive tapes. Measurement of flame resistance.
EN 12028 : 1997 ; Self adhesive tapes. Measurement of elongation under static load.
EN 12029 : 1997 ; Self adhesive tapes. Determination of the water-soluble corrosive ions.
EN 12030 : 1997 ; Self adhesive tapes. Measurement of impact resistance.
EN 12031 : 1997 ; Self-adhesive tapes. Measurement of bursting strength.
EN 12032 : 1997 ; Self-adhesive tapes. Measurement of bonding of thermosetting adhesive tapes during curing.
EN 12033 : 1997 ; Self-adhesive tapes. Measurement of bonding of thermosetting adhesive tapes after curing.
EN 12034 : 1997 ; Self-adhesive tapes. Measurement of the length of a roll of adhesive tape.
EN 12035 : 1997 ; Self-adhesive tapes. Flagging of adhesive tape.
EN 12036 : 1997 ; Self-adhesive tapes. Solvent penetration into adhesive masking tapes.
EN 12039 : 2000 ; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules.
EN 12039 : 2016 ; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules.
EN 12041 : 2014 ; Food processing machinery. Moulders. Safety and hygiene requirements.
EN 12042 : 2005+A1 : 2010 ; Food processing machinery. Automatic dividers. Safety and hygiene requirements.
EN 12042 : 2014 ; Food processing machinery. Automatic dough dividers. Safety and hygiene requirements.
EN 12043 : 2014 ; Food processing machinery. Intermediate provers. Safety and hygiene requirements.
EN 12044 : 2005+A1 : 2009 ; Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements.
EN 12045 : 2000 ; Shutters and blinds power operated. Safety in use. Measurement of the transmitted force.
EN 12047 : 1997 ; Solid fertilizers. Measurement of static angle of repose.
EN 12048 : 1997 ; Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 $0P 2) ^DC.
EN 12049 : 1997 ; Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying under reduced pressure.
EN 12050-1 : 2001 ; Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter
EN 12050-1 : 2015 ; Wastewater lifting plants for buildings and sites. Lifting plants for wastewater containing faecal matter
EN 12050-2 : 2001 ; Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for faecal-free wastewater
EN 12050-2 : 2015 ; Wastewater lifting plants for buildings and sites. Lifting plants for faecal-free wastewater
EN 12050-3 : 2001 ; Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter for limited applications
EN 12050-3 : 2015 ; Wastewater lifting plants for buildings and sites. Lifting plants for limited applications
EN 12050-4 : 2001 ; Wastewater lifting plants for buildings and sites. Principles of construction and testing. Non-return valves for faecal-free wastewater and wastewater containing faecal matter
EN 12050-4 : 2015 ; Wastewater lifting plants for buildings and sites. Non-return valves for faecal-free wastewater and wastewater containing faecal matter
EN 12051 : 2000 ; Building hardware. Door and window bolts. Requirements and test methods.
EN 12055 : 1998 ; Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements.
EN 12056-1 : 2000 ; Gravity drainage systems inside buildings. General and performance requirements
EN 12056-2 : 2000 ; Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation
EN 12056-3 : 2000 ; Gravity drainage systems inside buildings. Roof drainage, layout and calculation
EN 12056-4 : 2000 ; Gravity drainage systems inside buildings. Wastewater lifting plants. Layout and calculation
EN 12056-5 : 2000 ; Gravity drainage systems inside buildings. Installation and testing, instructions for operation, maintenance and use
EN 12057 : 2004 ; Natural stone products. Modular tiles. Requirements.
EN 12057 : 2015 ; Natural stone products. Modular tiles. Requirements.
EN 12058 : 2004 ; Natural stone products. Slabs for floors and stairs. Requirements.
EN 12058 : 2015 ; Natural stone products. Slabs for floors and stairs. Requirements.
EN 12059 : 2008+A1 : 2011 ; Natural stone products. Dimensional stone work. Requirements.
EN 12060 : 1998 ; Zinc and zinc alloys. Method of sampling. Specifications.
EN 12061 : 1999 ; Plastics piping systems. Thermoplastics fittings. Test method for impact resistance.
EN 12062 : 1998 ; Non-destructive examination of welds. General rules for metallic materials.
EN 12063 : 1999 ; Execution of special geotechnical work. Sheet pile walls.
EN 12065 : 1998 ; Installations and equipment for liquefied natural gas. Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires.
EN 12066 : 1998 ; Installations and equipment for liquefied natural gas. Testing of insulating linings for liquefied natural gas impounding areas.
EN 12067-1 : 1999 ; Gas/air ratio controls for gas burners and gas burning appliances. Pneumatic types
EN 12068 : 1999 ; Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials.
EN 12070 : 2000 ; Welding consumables. Wire electrodes, wires and rods for arc welding of creep-resisting steels. Classification.
EN 12071 : 2000 ; Welding consumables. Tubular electrodes for gas shielded metal arc welding of creep-resisting steels. Classification.
EN 12072 : 2000 ; Welding consumables. Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels. Classification.
EN 12073 : 2000 ; Welding consumables. Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels. Classification.
EN 12074 : 2000 ; Welding consumables. Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes.
EN 12077-2 : 1998+A1 : 2008 ; Cranes safety. Requirements for health and safety. Limiting and indicating devices
EN 12078 : 1998 ; Zero governors for gas burners and gas burning appliances.
EN 12079-1 : 2006 ; Offshore containers and associated lifting sets. Offshore containers. Design, manufacture and marking
EN 12079-2 : 2006 ; Offshore containers and associated lifting sets. Lifting sets. Design, manufacture and marking
EN 12079-3 : 2006 ; Offshore containers and associated lifting sets. Periodic inspection, examination and testing
EN 12079 : 1999 ; Offshore containers. Design, construction, testing, inspection and marking.
EN 12080 : 1998 ; Railway applications. Axleboxes. Rolling bearings.
EN 12080 : 2007+A1 : 2010 ; Railway applications. Axleboxes. Rolling bearings.
EN 12081 : 1998 ; Railway applications. Axleboxes. Lubricating greases.
EN 12081 : 2007+A1 : 2010 ; Railway applications. Axleboxes. Lubricating greases.
EN 12082 : 1998 ; Railway applications. Axleboxes. Performance testing.
EN 12082 : 2007+A1 : 2010 ; Railway applications. Axleboxes. Performance testing.
EN 12083 : 1998 ; Respiratory protective devices. Filters with breathing hoses, (non-mask mounted filters). Particle filters, gas filters, and combined filters. Requirements, testing, marking.
EN 12084 : 2001 ; Non-destructive testing. Eddy current testing. General principles and guidelines.
EN 12085 : 1997 ; Thermal insulating products for building applications. Determination of linear dimensions of test specimens.
EN 12085 : 2013 ; Thermal insulating products for building applications. Determination of linear dimensions of test specimens.
EN 12086 : 1997 ; Thermal insulating products for building applications. Determination of water vapour transmission properties.
EN 12086 : 2013 ; Thermal insulating products for building applications. Determination of water vapour transmission properties.
EN 12087 : 1997 ; Thermal insulating products for building applications. Determination of long term water absorption by immersion.
EN 12087 : 2013 ; Thermal insulating products for building applications. Determination of long term water absorption by immersion.
EN 12088 : 1997 ; Thermal insulating products for building applications. Determination of long term water absorption by diffusion.
EN 12088 : 2013 ; Thermal insulating products for building applications. Determination of long term water absorption by diffusion.
EN 12089 : 1997 ; Thermal insulating products for building applications. Determination of bending behaviour.
EN 12089 : 2013 ; Thermal insulating products for building applications. Determination of bending behaviour.
EN 12090 : 1997 ; Thermal insulating products for building applications. Determination of shear behaviour.
EN 12090 : 2013 ; Thermal insulating products for building applications. Determination of shear behaviour.
EN 12091 : 1997 ; Thermal insulating products for building applications. Determination of freeze-thaw resistance.
EN 12091 : 2013 ; Thermal insulating products for building applications. Determination of freeze-thaw resistance.
EN 12094-5 : 2001 ; Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems
EN 12094-5 : 2006 ; Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for high and low pressure selector valves and their actuators
EN 12094-6 : 2001 ; Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical disable devices for CO2 systems
EN 12094-6 : 2006 ; Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical disable devices
EN 12094-7 : 2001 ; Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for nozzles for CO2 systems
EN 12094-8 : 1998 ; Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for flexible connectors for CO$d2 systems
EN 12094-8 : 2006 ; Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for connectors
EN 12094-13 : 2001 ; Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for check valves and non-return valves
EN 12095 : 1997 ; Plastics piping systems. Brackets for rainwater piping systems. Test method for bracket strength.
EN 12096 : 1997 ; Mechanical vibration. Declaration and verification of vibration emission values.
EN 12097 : 2006 ; Ventilation for buildings. Requirements for ductwork components to facilitate maintenance of ductwork systems.
EN 12098-1 : 2013 ; Controls for heating systems. Control equipment for hot water heating systems
EN 12098-3 : 2013 ; Controls for heating systems. Control equipment for electrical heating systems
EN 12098-4 : 2005 ; Controls for heating systems. Optimum start-stop control equipment for electrical systems
EN 12098-5 : 2005 ; Controls for heating systems. Start-stop schedulers for heating systems
EN 12099 : 1997 ; Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content.
EN 12100 : 1998 ; Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports.
EN 12101-1 : 2005+A1 : 2006 ; Smoke and heat control systems. Specification for smoke barriers
EN 12101-3 : 2015 ; Smoke and heat control systems. Specification for powered smoke and heat control ventilators (Fans)
EN 12101-6 : 2005 ; Smoke and heat control systems. Specification for pressure differential systems. Kits
EN 12101-7 : 2011 ; Smoke and heat control systems. Smoke duct sections
EN 12101-8 : 2011 ; Smoke and heat control systems. Smoke control dampers
EN 12101-10 : 2005 ; Smoke and heat control systems. Power supplies
EN 12102 : 2008 ; Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level.
EN 12102 : 2013 ; Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level.
EN 12103 : 1999 ; Resilient floor coverings. Agglomerated cork underlays. Specification.
EN 12105 : 1998 ; Resilient floor coverings. Determination of moisture content of agglomerated composition cork.
EN 12106 : 1998 ; Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off.
EN 12107 : 1998 ; Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.
EN 12110 : 2014 ; Tunnelling machines. Air locks. Safety requirements.
EN 12111 : 2014 ; Tunnelling machines. Road headers and continuous miners. Safety requirements.
EN 12114 : 2000 ; Thermal performance of buildings. Air permeability of building components and building elements. Laboratory test methods.
EN 12115 : 2000 ; Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification.
EN 12115 : 2011 ; Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification.
EN 12117 : 1998 ; Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.
EN 12118 : 1998 ; Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.
EN 12119 : 1997 ; Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling.
EN 12120 : 1999 ; Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite.
EN 12120 : 2005 ; Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite.
EN 12120 : 2012 ; Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite.
EN 12121 : 1999 ; Chemicals used for treatment of water intended for human consumption. Sodium disulfite.
EN 12121 : 2005 ; Chemicals used for treatment of water intended for human consumption. Sodium disulfite.
EN 12121 : 2012 ; Chemicals used for treatment of water intended for human consumption. Sodium disulfite.
EN 12122 : 1999 ; Chemicals used for treatment of water intended for human consumption. Ammonia solution.
EN 12122 : 2005 ; Chemicals used for treatment of water intended for human consumption. Ammonia solution.
EN 12123 : 1999 ; Chemicals used for treatment of water intended for human consumption. Ammonium sulfate.
EN 12123 : 2005 ; Chemicals used for treatment of water intended for human consumption. Ammonium sulfate.
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com