Chemical Composition of Stainless Steel Long Products For General Purposes To BS EN 10088-3

Chemical Composition of Stainless Steel Long Products For General Purposes To BS EN 10088-3

Chemical composition of stainless steel long products for general purposes to BS EN-10088-3
BS EN 10088-3 is the material standard for stainless steel long products for general purposes.
The current edition was published in October 2014. There have been 15 new grades added compared to the
2005 edition and the compositions of 2 grades have been changed. LAST UPDATED 28th NOVEMBER 2014.

The new grades added include austenitic grades, 1.4615, 1.4646, 1.4020, 1.4378, austenitic-ferritic, (duplex), grades
1.4162, 1.4662, 1.4482, 1.4062, 1.4669, 1.4658, ferritic grades, 1.4611, 1.4621, 1.4613, martensitic grade, 1.4150,
and precipitation hardening grade, 1.4612

CHEMICAL COMPOSITION OF STAINLESS STEEL LONG PRODUCTS FOR GENERAL PURPOSES TO BS EN 10088-3
Introduction
BS EN 10088-3 is the material standard for stainless steel semi-finished products, bars, rods and sections for general purposes.
Ferritic, martensitic, precipitation hardening, austenitic and austenitic-ferritic, (duplex), grades are included.
The chemical composition of all the grades of stainless steel covered in the standard are listed.

As an alternative to scanning down the list try the ‘find’ facility on your keyboard, using the ‘Ctrl’ and ‘F’ keys together.
Type in the term you are looking for in the dialog box that then appears.

The data given is not intended to replace that shown in individual standards to which reference should always be made.

BS EN 10088-3 chemical composition tables
Designation Chemical composition % by mass max unless stated
Steel name Steel number C Si Mn P S N Cr Cu Mo Ni Others
Ferritic stainless steels-standard grades
X2CrNi12 1.4003 0.030 1.00 1.50 0.040 0.030 0.030 10.5/12.5 – – 0.30/1.00 –
X6Cr13 1.4000 0.08 1.00 1.00 0.040 0.030 – 12.0/14.0 – – – –
X6Cr17 1.4016 0.08 1.00 1.00 0.040 0.030 – 16.0/18.0 – – – –
X6CrMoS17 1.4105 0.08 1.50 1.50 0.040 0.15/0.35 – 16.0/18.0 – 0.20/0.60 – –
X6CrMo17-1 1.4113 0.08 1.00 1.00 0.040 0.030 – 16.0/18.0 – 0.90/1.40 – –
Ferritic stainless steels-special grade
X2CrTi17 1.4520 0.025 0.50 0.50 0.040 0.015 0.015 16.0/18.0 – – – Ti: 0.30/0.60
X3CrNb17 1.4511 0.05 1.00 1.00 0.040 0.030 – 16.0/18.0 – – – Nb: 12xC/1.00
X2CrTiNb18 1.4509 0.030 1.00 1.00 0.040 0.015 – 17.5/18.5 Ti: 0.10/0.60 Nb: [(3xC)+0.30]/1.00
X2CrTi21 1.4611 0.030 1.00 1.00 0.050 0.050 – 19.0/22.0 0.50 0.50 0.50 Ti: 4(C+N) 0.20/ 1.00
Al: 0.05

X2CrNbCu21 1.4621 0.030 1.00 1.00 0.040 0.015 0.030 20.0/21.5 0.10/1.00 – – Nb: 7(C+N)+0.10/1.00
X2CrTi24 1.4613 0.030 1.00 1.00 0.050 0.050 – 22.0/25.0 0.50 0.50 0.50 Ti: 4(C+N) 0.20/ 1.00
Al: 0.05

X2CrMoTiS18-2 4 1.4523 0.030 1.00 0.50 0.040 0.15/0.35 – 17.5/19.0 – 2.00/2.50 – Ti: 0.30/0.80 (C+N): 0.040
X6CrMoNb17-1 1.4526 0.08 1.00 1.00 0.040 0.015 0.040 16.0/18.0 – 0.80/1.40 – Nb: [7x(C+N)+0.10]/1.00
Martensitic stainless steels-standard grades
X12Cr13 1.4006 0.08/0.15 1.00 1.50 0.040 0.030 – 11.5/13.5 – – 0.75 –
X12CrS13 1.4005 0.06/0.15 1.00 1.50 0.040 0.15/0.35 – 12.0/14.0 – 0.60 – –
X15Cr13 1.4024 0.12/0.17 1.00 1.00 0.040 0.030 – 12.0/14.0 – – – –
X20Cr13 1.4021 0.16/0.25 1.00 1.50 0.040 0.030 – 12.0/14.0 – – – –
X30Cr13 1.4028 0.26/0.35 1.00 1.50 0.040 0.030 – 12.0/14.0 – – – –
X39Cr13 1.4031 0.36/0.42 1.00 1.00 0.040 0.030 – 12.5/14.5 – – – –
X46Cr13 1.4034 0.43/0.50 1.00 1.00 0.040 0.030 – 12.5/14.5 – – – –
X38CrMo14 1.4419 0.36/0.42 1.00 1.00 0.040 0.015 13.0/14.5 – 0.60/1.00
X50CrMoV15 1.4116 0.45/0.55 1.00 1.00 0.040 0.030 – 14.0/15.0 – 0.50/0.80 – V: 0.10/0.20
X55CrMo14 1.4110 0.48/0.60 1.00 1.00 0.040 0.030 13.0/15.0 0.50/0/80 V: < 0.15
X14CrMoS17 1.4104 0.10/0.17 1.00 1.50 0.040 0.15/0.35 – 15.5/17.5 – 0.20/0.60 – –
X39CrMo17-1 1.4122 0.33/0.45 1.00 1.50 0.040 0.030 – 15.5/17.5 – 0.80/1.30 1.00 –
X17CrNi16-2 1.4057 0.12/0.22 1.00 1.50 0.040 0.030 – 15.0/17.0 – – 1.50/2.50 –
X3CrNiMo13-4 1.4313 0.05 0.70 1.50 0.040 0.015 0.020 12.0/14.0 – 0.30/0.70 3.5/4.5 –
X4CrNiMo16-5-1 1.4418 0.06 0.70 1.50 0.040 0.030 0.020 15.0/17.0 – 0.80/1.50 4.0/6.0 –
Martensitic stainless steels-special grades
X29CrS13 1.4029 0.25/0.32 1.00 1.50 0.040 0.15/0.25 – 12.0/13.5 – 0.60 – –
X46CrS13 1.4035 0.43/0.50 1.00 2.00 0.040 0.15/0.35 – 12.5/14.0 – – – –
X70CrMo15 1.4109 0.60/0.75 0.70 1.00 0.040 0.030 – 14.0/16.0 – 0.40/0.80 – –
X40CrMoVN16-2 1.4123 0.35/0.50 1.00 1.00 0.040 0.015 – 14.0/16.0 – 1.00/2.50 0.50 V: 1.50 N: 0.10/0.30
X105CrMo17 1.4125 0.95/1.20 1.00 1.00 0.040 0.030 – 16.0/18.0 – 0.40/0.80 – –
X90CrMoV18 1.4112 0.85/0.95 1.00 1.00 0.040 0.030 – 17.0/19.0 – 0.90/1.30 – V: 0.07/0.12
X2CrNiMoV13-5-2 1.4415 0.030 0.50 0.50 0.040 0.015 – 11.5/13.5 – 1.50/2.50 4.5/6.5 Ti: 0.010 V: 0.10/0.50
X53CrSiMoVN16-2 1.4150 0.045/0.60 1.30/1.70 0.80 0.030 0.010 0.05/0.20 15.0/16.5 – 0.20/0.40 0.40 V; 0.20/0.40
Precipitation hardening stainless steels-standard grades
X5CrNiCuNb16-4 1.4542 0.07 0.70 1.50 0.040 0.030 – 15.0/17.0 3.0/5.0 0.60 3.0/5.0 Nb: 5xC/0.45
X7CrNiAl17-7 1.4568 0.09 0.70 1.00 0.040 0.015 – 16.0/18.0 – – 6.5/7.8 Al: 0.70/1.50
X5CrNiMoCuNb14-5 1.4594 0.07 0.70 1.00 0.040 0.015 – 13.0/15.0 1.20/2.00 1.20/2.00 5.0/6.0 Nb: 0.15/0.60
Precipitation hardening stainless steels-special grades
X1CrNiMoAlTi12-9-2 1.4530 0.015 0.10 0.10 0.010 0.005 0.010 11.5/12.5 – 1.85/2.15 8.5/9.5 Al: 0.60/0.80 Ti: 0.28/0.37
X1CrNiMoAlTi12-10-2 1.4596 0.015 0.10 0.10 0.010 0.005 0.020 11.5/12.5 – 1.85/2.15 9.2/10.2 Al: 0.80/1.10 Ti: 0.28/0.40
X1CrNiMoAlTi12-11-2 1.4612 0.015 0.10 0.10 0.010 0.005 0.010 11.0/12.5 – 1.75/2.25 102/11.3 Al: 1.35/1.75 Ti:0.20/0.50
X5NiCrTiMoVB25-12-2 1.4606 0.08 1.00 1.00/2.00 0.025 0.015 – 13.0/16.0 – 1.00/1.50 24.0/27.0 B: 0.0010/0.010 Al: < 0.35 Ti:1.90/2.30 V: 0.10/0.50
Austenitic stainless steels-standard grades
X10CrNi18-8 1.4310 0.05/0.15 2.00 2.00 0.045 0.015 0.11 16.0/19.0 – 0.80 6.0/9.5 –
X2CrNi18-9 1.4307 0.030 1.00 2.00 0.045 0.030 0.11 17.5/19.5 – – 8.0/10.5 –
X2CrNi19-11 1.4306 0.030 1.00 2.00 0.045 0.030 0.11 18.0/20.0 – – 10.0/12.0 –
X2CrNiN18-10 1.4311 0.030 1.00 2.00 0.045 0.030 0.12/0.22 17.5/19.5 – – 8.5/11.5 –
X5CrNi18-10 1.4301 0.07 1.00 2.00 0.045 0.030 0.11 17.5/19.5 – – 8.0/10.5 –
X8CrNiS18-9 1.4305 0.10 1.00 2.00 0.045 0.15/0.35 0.11 17.0/19.0 1.00 – 8.0/10.0 –
X6CrNiTi18-10 1.4541 0.08 1.00 2.00 0.045 0.030 – 17.0/19.0 – – 9.0/12.0 Ti: 5xC/0.70
X4CrNi18-12 1.4303 0.06 1.00 2.00 0.045 0.030 0.11 17.0/19.0 – – 11.0/13.0 –
X2CrNiMo17-12-2 1.4404 0.030 1.00 2.00 0.045 0.030 0.11 16.5/18.5 – 2.00/2.50 10.0/13.0 –
X2CrNiMoN17-11-2 1.4406 0.030 1.00 2.00 0.045 0.030 0.12/0.22 16.5/18.5 – 2.00/2.50 10.0/12.5 –
X5CrMo17-12-2 1.4401 0.07 1.00 2.00 0.045 0.030 0.11 16.5/18.5 – 2.00/2.50 10.0/13.0 –
X6CrNiMoTi17-12-2 1.4571 0.08 1.00 2.00 0.045 0.030 – 16.5/18.5 – 2.00/2.50 10.5/13.5 Ti: 5xC/0.70
X2CrNiMo17-12-3 1.4432 0.030 1.00 2.00 0.045 0.030 0.11 16.5/18.5 – 2.50/3.00 10.5/13.0 –
X2CrNiMoN17-13-3 1.4429 0.030 1.00 2.00 0.045 0.015 0.12/0.22 16.5/18.5 – 2.50/3.00 11.0/14.0 –
X3CrNiMo17-13-3 1.4436 0.05 1.00 2.00 0.045 0.030 0.11 16.5/18.5 – 2.50/3.00 10.5/13.0 –
X2CrNiMo18-14-3 1.4435 0.030 1.00 2.00 0.045 0.030 0.11 17.0/19.0 – 2.50/3.00 12.5/15.0 –
X2CrNiMoN17-13-5 1.4439 0.030 1.00 2.00 0.045 0.015 0.12/0.22 16.5/18.5 – 4.0/5.0 12.5/14.5 –
X6CrNiCuS18-9-2 1.4570 0.08 1.00 2.00 0.045 0.15/0.35 0.11 17.0/19.0 1.40/1.80 0.60 8.0/10.0 –
X3CrNiCu18-9-4 1.4567 0.04 1.00 2.00 0.045 0.030 0.11 17.0/19.0 3.0/4.0 – 8.5/10.5 –
X1NiCrMoCu25-20-5 1.4539 0.020 0.70 2.00 0.030 0.010 0.15 19.0/21.0 1.20/2.00 4.0/5.0 24.0/26.0 –
Austenitic stainless steels-special grades
X5CrNi17-7 1.4319 0.07 1.00 2.00 0.045 0.030 0.11 16.0/18.0 – – 6.0/8.0 –
X9CrNi18-9 1.4325 0.03/0.15 1.00 2.00 0.045 0.030 – 17.0/19.0 – – 8.0/10.0 –
X5CrNiN19-9 1.4315 0.06 1.00 2.00 0.045 0.015 0.12/0.22 18.0/20.0 – – 8.0/11.0 –
X6CrNiNb18-10 1.4550 0.08 1.00 2.00 0.045 0.015 – 17.0/19.0 – – 9.0/12.0 Nb: 10xC/1.00
X1CrNiMoN25-22-2 1.4466 0.020 0.70 2.00 0.025 0.010 0.10/0.16 24.0/26.0 – 2.00/2.50 21.0/23.0 –
X6CrNiMoNb17-12-2 1.4580 0.08 1.00 2.00 0.045 0.015 – 16.5/18.5 – 2.00/2.50 10.5/13.5 Nb: 10xC/1.00
X2CrNiMo18-15-4 1.4438 0.030 1.00 2.00 0.045 0.030 0.11 17.5/19.5 – 3.0/4.0 13.0/16.0 –
X1CrNiMoCuN24-22-8 1.4652 0.020 0.50 2.00/4.0 0.030 0.005 0.45/0.55 23.0/25.0 0.30/0.60 7.0/8.0 21.0/23.0 –
X1CrNiSi18-15-4 1.4361 0.015 3.7/4.5 2.00 0.025 0.010 0.11 16.5/18.5 – 0.20 14.0/16.0 –
X11CrNiMnN19-8-6 1.4369 0.07/0.15 0.50/1.00 5.0/7.5 0.030 0.015 0.20/0.30 17.5/19.5 – – 6.5/8.5 –
X13CrMnNiN18-13-2 1.4020 0.15 1.00 11.0/14.0 0.045 0.030 0.20/0.45 16.5/19.0 – – 0.5/2.5 –
X6CrMnNiN18-13-3 1.4378 0.08 1.00 11.5/14.5 0.060 0.030 0.20/0.40 17.0/19.0 – – 2.3/3.7
X6CrMnNiCuN18-12-4-2 1.4646 0.02/0.10 1.00 10.5/12.5 0.050 0.015 0.20/0.30 17.0/19.0 1.50/3.00 0.50 3.5/4.5
X12CrMnNiN17-7-5 1.4372 0.15 1.00 5.5/7.5 0.045 0.015 0.05/0.25 16.0/18.0 – – 3.5/5.5 –
X8CrMnNiN18-9-5 1.4374 0.05/0.10 0.30/0.60 9.0/10.0 0.035 0.030 0.25/0.32 17.5/18.0 0.40 0.50 5.0/6.0 –
X8CrMnCuNB17-8-3 1.4597 0.10 2.00 6.5/9.0 0.040 0.030 0.10/0.30 15.0/18.0 2.00/3.5 1.00 2.00 B: 0.0005/0.0050
X3CrMnNiCu15-8-5-3 1.4615 0.030 1.00 7.0/9.0 0.040 0.010 0.02/0.06 14.0/16.0 2.0/4.0 0.80 4.5/6.0
X3CrNiCu19-9-2 1.4560 0.035 1.00 1.50/2.00 0.045 0.015 0.11 18.0/19.0 1.50/2.00 – 8.0/9.0 –
X3CrNiCuMo17-11-3-2 1.4578 0.04 1.00 1.00 0.045 0.015 0.11 16.5/17.5 3.0/3.5 2.00/2.50 10.0/11.0 –
X1NiCrMoCu31-27-4 1.4563 0.020 0.70 2.00 0.030 0.010 0.11 26.0/28.0 0.70/1.50 3.0/4.0 30.0/32.0 –
X1CrNiMoCuN25-25-5 1.4537 0.020 0.70 2.00 0.030 0.010 0.17/0.25 24.0/26.0 1.00/2.00 4.7/5.7 24.0/27.0 –
X1CrNiMoCuN20-18-7 4 1.4547 0.020 0.70 1.00 0.030 0.010 0.18/0.25 19.5/20.5 0.50/1.00 6.0/7.0 17.5/18.5 –
X2CrNiMoCuS17-10-2 1.4598 0.030 1.00 2.00 0.045 0.10/0.20 0.11 16.5/18.5 1.30/1.80 2.00/2.50 10.0/13.0 –
X1CrNiMoCuNW24-22-6 1.4659 0.020 0.70 2.00/4.0 0.030 0.010 0.35/0.50 23.0/25.0 1.00/2.00 5.5/6.5 21.0/23.0 W: 1.50/2.50
X1NiCrMoCuN25-20-7 1.4529 0.020 0.50 1.00 0.030 0.010 0.15/0.25 19.0/21.0 0.50/1.50 6.0/7.0 24.0/26.0 –
X2CrNiMnMoN25-18-6-5 1.4565 0.030 1.00 5.0/7.0 0.030 0.015 0.30/0.60 24.0/26.0 – 4.0/5.0 16.0/19.0 Nb: 0.15
Austenitic-ferritic stainless steels-standard grades
X2CrNiN23-4 1.4362 0.030 1.00 2.00 0.035 0.015 0.05/0.20 22.0/24.0 0.10/0.60 0.10/0.60 3.5/5.5 –
X3CrNiMoN27-5-2 1.4460 0.05 1.00 2.00 0.035 0.030 0.05/0.20 25.0/28.0 – 1.30/2.00 4.5/6.5 –
X2CrNiMoN22-5-3 1.4462 0.030 1.00 2.00 0.035 0.015 0.10/0.22 21.0/23.0 – 2.50/3.5 4.5/6.5 –
Austenitic-ferritic stainless steels-special grades
X2CrNiN22-2 1.4062 0.030 1.00 2.00 0.040 0.010 0.16/0.28 21.5/24.0 – 0.45 1.00/2.90 –
X2CrCuNiN23-2-2 1.4669 0.045 1.00 1.00/3.00 0.040 0.030 0.12/0.20 21.5/24.0 1.60/3.00 0.50 1.00/3.00 –
X2CrNiMoSi18-5-3 1.4424 0.030 1.40/2.00 1.20/2.00 0.035 0.015 0.05/0.10 18.0/19.0 – 2.50/3.0 4.5/5.2 –
X2CrMnNiN21-5-1 1.4162 0.040 1.00 4.00/6.00 0.040 0.015 0.20/0.25 21.0/22.0 0.10/0.80 0.10/0.80 1.35/1.90 –
X2CrMnNiMoN21-5-3 1.4482 0.030 1.00 4.00/6.00 0.035 0.030 0.05/0.20 19.5/21.5 1.00 0.10/0.60 1.50/3.5
X2CrNiMnMoCuN21-5-3 1.4662 0.030 0.70 2.50/4.00 0.035 0.005 0.20/0.30 23.0/25.0 0.10/0.80 1.00/2.00 3.0/4.5
X2CrNiMoN29-7-2 1.4477 0.030 0.50 0.80/1.50 0.035 0.015 0.30/0.40 28.0/30.0 0.80 1.50/2.60 5.8/7.5 –
X2CrNiMoCuN25-6-3 1.4507 0.030 0.70 2.00 0.035 0.015 0.20/0.30 24.0/26.0 1.00/2.50 3.0/4.0 6.0/8.0 –
X2CrNiMoN25-7-4 1.4410 0.030 1.00 2.00 0.035 0.015 0.24/0.35 24.0/26.0 – 3.0/4.5 6.0/8.0 –
X2CrNiMoCuWN25-7-4 1.4501 0.030 1.00 1.00 0.035 0.015 0.20/0.30 24.0/26.0 0.50/1.00 3.0/4.0 6.0/8.0 W: 0.50/1.00
X2CrNiMoCoN28-8-5-1 1.4658 0.030 0.50 1.50 0.035 0.010 0.30/0.50 26.0/29.0 1.00 4.0/5.0 5.5/9.5 Co: 0.50/2.00
Related Articles
Chemical composition of stainless steel flat products for general purposes to BS EN 10088-2
Chemical composition of heat resisting steels to BS EN 10095
Ambient temperature mechanical properties of ferritic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of martensitic and precipitation hardening stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel long products to BS EN 10088-3
Product Analysis Tolerances for Steels to EN 10088-2 and EN 10088-3

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers

Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com

Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.