British and American Standards for Tolerances, Surface Finish And Testing of Stainless Steels
British and american standard for tolerance, surface finish and testing of stainless steel
British and ASTM, (American Society for Testing and Materials), standards are listed in sections covering tolerances,
passivation and cleaning and testing products in stainless steels. LAST REVIEWED 10th January 2012.
BRITISH AND AMERICAN STANDARDS FOR TOLERANCES, SURFACE FINISH AND TESTING OF STAINLESS STEELS
Introduction
The table shows both current and obsolete standards, (where these may be of current interest),
in the ‘Status’ column. ‘C’ is current, ‘W’ is withdrawn, “S” is superseded for stainless steels, that is the standard was
applicable to all steels, but there is now a new standard covering stainless steels only.
The ‘date’ is the current publication year.
Use the ‘Ctrl’ and ‘F’ keys to ‘find’ the standard you are looking for.
These lists cannot be guaranteed as complete and accurate by the BSSA.
In cases of doubt the catalogues maintained by the British Standards Institution should be used.
Table
Std Number Date Status Title
Tolerances and surfaces
BS EN ISO 1127 1997 C Stainless Steel Tubes – Dimensions, Tolerances and Conventional Masses Per Unit Length
ISO 9444-1 2009 C Continuously hot-rolled stainless steel – Tolerances on dimensions and form . Part 1: Narrow strip and cut lengths
BS EN ISO 9444-2 2010 C Continuously hot-rolled stainless steel. Tolerances on dimensions and form. Wide strip and sheet/plate
BS EN ISO 9445-1 2010 C Continuously cold-rolled stainless steel. Tolerances on dimensions and form. Narrow strip and cut lengths
BS EN ISO 9445-2 2010 C Continuously cold-rolled stainless steel. Tolerances on dimensions and form. Wide strip and plate/sheet
BS EN 10029 1991 S Tolerances on Dimensions, Shape and Mass for Hot Rolled Steel Plates 3mm Thick or Above. Replaced by BS EN ISO 18286
BS EN 10048 1997 S Hot Rolled Narrow Steel Strip – Tolerances on Dimensions and Shape. Replaced by BS EN ISO 9444-1
BS EN 10051 2010 S Continuously Hot-Rolled Uncoated Plate, Sheet and Strip of Non-Alloy and Alloy Steels – Tolerances on Dimensions and Shape. Replaced by BS EN ISO 9444-2
BS EN 10058 2018 C
Hot rolled flat steel bars and steel wide flats for general purposes. Dimensions and tolerances on shape and dimensions
BS EN 10059 2003 C Hot Rolled Square Steel Bars for General Purposes – Dimensions and Tolerances on Shape and Dimensions
BS EN 10060 2003 C Hot Rolled Round Steel Bars for General Purposes – Dimensions and Tolerances on Shape and Dimensions
BS EN 10061 2003 C Hot Rolled Hexagon Steel Bars for General Purposes – Dimensions and Tolerances on Shape and Dimensions
BS EN 10258 1997 W Cold Rolled Stainless Steel Narrow Strip and Cut Lengths – Tolerances on Dimensions and Shape. Replaced by BS EN ISO 9445-1
BS EN 10259 1997 W Cold Rolled Stainless Steel Wide Strip and Plate/Sheet Tolerances on Dimensions and Shape. Replaced by BS EN ISO 9445-2
BS EN 10278 1999 C Dimensions and Tolerances of Bright Steel Products
BS EN ISO 18286 2010 C Hot-rolled stainless steel plates. Tolerances on dimensions and shape
BS 1134 2010 C
Assessment of surface texture. Guidance and general information
Passivation and cleaning
BS EN 2516 2020 C
Aerospace series. Passivation of corrosion resisting steels and decontamination of nickel base alloys
BS ISO 15730 2016 C
Metallic and other inorganic coatings. Electropolishing as a means of smoothing and passivating stainless steel
ASTM A380 – – Practice for Cleaning, Descaling and Passivation of Stainless Steel Parts, Equipment and Systems
ASTM A380 ASTM A967 – – Specification for Chemical Passivation Treatments for Stainless Steel Parts
Testing
BS EN 10204 2004 C Metallic Products – Types of Inspection Documents
BS EN 10228-4 2016 C
Non-destructive testing of steel forgings – Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
BS EN 10307 2001 C Non-destructive testing. Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
BS EN ISO 3651 1998 C Determination of Resistance to Intergranular Corrosion of Stainless Steels
BS ISO 11408 1999 C Chemical Conversion Coatings – Black Oxide Coating on Iron and Steel – Specification and Test Methods
BS ISO 16701 2015 C
Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
Top Leading Steel Maker Manufacture In The World
Shandong Iron and Steel Group (China)
PAO Severstal (Russia)
Thyssenkrupp Ag (Germany)
Voestalpine AG (Austria)
CITIC Pacific Special Steel Holdings (China)
SSAB AB (Sweden)
Hebei Puyong Iron and Steel Group Co., Ltd. (China)
Tata Steel (India)
China Steel Corporation (China)
JFE Steel Corporation (Japan)
Nippon Steel Corporation (Japan)
Daido Steel (Japan)
HBIS Group (China)
Baosteel Group Corporation (China)
Gerdau S.A. (Brazil)
Metinvest Holding, LLC (Ukraine)
Nucor Corporation (U.S.)
Hyundai Steel Company (South Korea)
Novolipetsk Steel (NLMK) (Russia)
JSW Steel (India)
United States Steel Corporation (U.S.)
Posco Iron And Steel Group (South Korea)
Hyundai Steel (South Korea)
ArcelorMittal S.A. (Luxembourg)
Steel Authority of India SAIL (India)
Jindal Steel And Power (India)
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.