ASTM Standard And Specification – Page 4

ASTM E2088 – 06(2011) : Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E2089 – 00(2014) : Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
ASTM E209 – 00(2010) : Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM E2090 – 12 : Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E2091 – 11 : Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
ASTM E2092 – 13 : Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2093 – 12 : Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM E2096 / E2096M – 10 : Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
ASTM E2097 – 00(2006) : Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
ASTM E2098 / E2098M – 13 : Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
ASTM E2099 – 00(2014)e1 : Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
ASTM E21 – 09 : Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E210 – 63(2010) : Standard Specification for Microscope Objective Thread
ASTM E2100 – 04(2010) : Standard Practice for Calculating the International Runway Friction Index
ASTM E2102 – 14 : Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E2103 / E2103M – 13 : Standard Classification for Bridge Elements—UNIFORMAT II
ASTM E2104 – 09 : Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
ASTM E2105 – 00(2010) : Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM E2106 – 00(2011) : Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
ASTM E2107 – 06 : Standard Practice for Environmental Regulatory Compliance Audits
ASTM E2108 – 10 : Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM E2109 – 01(2007) – Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM E211 – 82(2010) : Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy
ASTM E2110 – 11 : Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
ASTM E2111 – 12 : Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
ASTM E2112 – 07 : Standard Practice for Installation of Exterior Windows, Doors and Skylights
ASTM E2113 – 13 : Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2114 – 08 : Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM E2115 – 06 : Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E2117 – 06(2011) : Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription
ASTM E2120 – 10 : Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
ASTM E2121 – 13 : Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
ASTM E2122 – 02(2013) : Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves
ASTM E2123 – 10 : Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation
ASTM E2124 – 10 : Standard Practice for the Specification for Equipment and Supplies in Sexual Assault Investigations
ASTM E2125 – 11 : Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues
ASTM E2126 – 11 : Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM E2127 – 01a(2007) : Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
ASTM E2128 – 12 : Standard Guide for Evaluating Water Leakage of Building Walls
ASTM E2129 – 10 : Standard Practice for Data Collection for Sustainability Assessment of Building Products
ASTM E213 – 14 : Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
ASTM E2131 – 09 : Standard Practice For Addressing and Reporting Loss, Damage, or Destruction of Tangible Property
ASTM E2132 – 11 : Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets
ASTM E2133 – 03(2013) : Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
ASTM E2134 / E2134M – 14 : Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
ASTM E2135 – 10ae1 : Standard Terminology for Property and Asset Management
ASTM E2136 – 04(2013) : Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability
ASTM E2137 – 06(2011) : Standard Guide for Estimating Monetary Costs and Liabilities for Environmental Matters
ASTM E2139 – 05(2011) : Standard Test Method for Same-Different Test
ASTM E2140 – 01(2009) : Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
ASTM E2141 – 12 : Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
ASTM E2142 – 08 : Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E2143 – 01(2013) : Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM E2144 – 11 : Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM E2145 – 07(2013) : Standard Practice for Information Modeling
ASTM E2147 – 01(2013) : Standard Specification for Audit and Disclosure Logs for Use in Health Information Systems
ASTM E2148 – 11b : Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
ASTM E2149 – 13a : Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions
ASTM E215 – 11 : Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube
ASTM E2150 – 13 : Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
ASTM E2151 – 02(2010) : Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings
ASTM E2152 – 12 : Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
ASTM E2153 – 01(2011) : Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
ASTM E2154 – 01(2008) : Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
ASTM E2156 – 04(2013) : Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
ASTM E2157 – 09 : Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
ASTM E2159 – 01(2008) : Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
ASTM E2160 – 04(2012) : Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2161 – 13 : Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2162 – 07 : Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders
ASTM E2163 – 06(2014) : Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs
ASTM E2164 – 08 : Standard Test Method for Directional Difference Test
ASTM E2166 – 12 : Standard Practice for Organizing and Managing Building Data
ASTM E2167 – 01(2008) : Standard Guide for Selection and Use of Stone Consolidants
ASTM E2168 – 10 : Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
ASTM E2169 – 12 : Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
ASTM E2171 – 02(2013) : Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record
ASTM E2172 – 01(2008) : Standard Guide for Conducting Laboratory Soil Toxicity Tests with the Nematode Caenorhabditis elegans
ASTM E2173 – 07(2011) : Standard Guide for Disclosure of Environmental Liabilities
ASTM E2174 – 10ae1 : Standard Practice for On-Site Inspection of Installed Fire Stops
ASTM E2175 – 01(2013) : Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2177 – 11 : Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E2178 – 13 : Standard Test Method for Air Permeance of Building Materials
ASTM E2179 – 03(2009) : Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
ASTM E2180 – 07(2012) : Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials
ASTM E2181 / E2181M – 11 : Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
ASTM E2186 – 02a(2010) : Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
ASTM E2187 – 09 : Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2188 – 10 : Standard Test Method for Insulating Glass Unit Performance
ASTM E2189 – 10e1 : Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
ASTM E2190 – 10 : Standard Specification for Insulating Glass Unit Performance and Evaluation
ASTM E2191 / E2191M – 10 : Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
ASTM E2192 – 13 : Standard Guide for Planar Flaw Height Sizing by Ultrasonics
ASTM E2193 – 08 : Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2194 – 12 : Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials
ASTM E2195 – 09 : Standard Terminology Relating to the Examination of Questioned Documents
ASTM E2196 – 12 : Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with Medium Shear and Continuous Flow Using Rotating Disk Reactor
ASTM E2197 – 11 : Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides
ASTM E2198 – 10 : Specification for Phytoseiulus persimilis Athias-Henriot (Acarina:Phytoseiidae)
ASTM E2199 – 08e1 : Standard Specification for Encarsia formosa Gahan (Hymenoptera:Aphelinidae)
ASTM E220 – 13 : Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E2201 – 13 : Standard Terminology for Coal Combustion Products
ASTM E2202 – 02(2009) : Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
ASTM E2203 – 14 : Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
ASTM E2204 – 11a : Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
ASTM E2205 / E2205M – 02(2009)e1 : Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources
ASTM E2206 – 11 : Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2207 – 08(2013)e1 : Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM E2208 – 02(2010)e1 : Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
ASTM E2209 – 13 : Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
ASTM E2210 – 12 : Standard Specification for Guideline Elements Model version 3 (GEM III)—Document Model for Clinical Practice Guidelines
ASTM E2212 – 02a(2010) : Standard Practice for Healthcare Certificate Policy
ASTM E2213 – 03(2010) : Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications
ASTM E2214 – 12e1 : Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E2215 – 10 : Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
ASTM E2216 – 02(2013) : Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
ASTM E2217 – 12 : Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
ASTM E2218 – 14 : Standard Test Method for Determining Forming Limit Curves
ASTM E222 – 10 : Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
ASTM E2223 – 13 : Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics
ASTM E2224 – 10 : Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2225 – 10 : Standard Guide for Forensic Examination of Fabrics and Cordage
ASTM E2226 – 12 : Standard Practice for Application of Hose Stream
ASTM E2227 – 13 : Standard Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography
ASTM E2228 – 10 : Standard Guide for Microscopic Examination of Textile Fibers
ASTM E2229 – 09 : Standard Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data
ASTM E223 – 08 : Standard Test Methods for Analysis of Sulfuric Acid
ASTM E2230 – 13 : Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
ASTM E2231 – 14 : Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E2232 – 10 : Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
ASTM E2234 – 09(2013) : Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL
ASTM E2235 – 04(2012) : Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E2236 – 10 : Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
ASTM E2238 – 12 : Standard Guide for Evacuation Route Diagrams
ASTM E2239 – 12 : Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
ASTM E224 – 08 : Standard Test Methods for Analysis of Hydrochloric Acid
ASTM E2240 – 06 : Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
ASTM E2241 – 06 : Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
ASTM E2242 – 13 : Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
ASTM E2243 – 13 : Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation
ASTM E2244 – 11e1 : Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245 – 11e1 : Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2246 – 11e1 : Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2247 – 08 : Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland or Rural Property
ASTM E2248 – 13 : Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
ASTM E2249 – 02(2008) : Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
ASTM E2251 – 11 : Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM E2252 – 12 : Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
ASTM E2253 – 11 : Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2254 – 13 : Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2255 / E2255M – 13 : Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
ASTM E2256 – 13 : Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
ASTM E2257 – 13a : Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E2259 – 03a(2011) : Standard Guide for Archiving and Retrieving ITS-Generated Data
ASTM E2260 – 03(2012)e1 : Standard Guide for Repointing (Tuckpointing) Historic Masonry
ASTM E2261 / E2261M – 12 : Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
ASTM E2262 – 03(2009) : Standard Practice for Estimating Thurstonian Discriminal Distances
ASTM E2263 – 12 : Standard Test Method for Paired Preference Test
ASTM E2264 – 05(2013) : Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM E2265 – 09 : Standard Terminology for Anchors and Fasteners in Concrete and Masonry
ASTM E2266 – 11 : Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
ASTM E2267 – 04(2013) : Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality
ASTM E2268 – 04(2011) : Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
ASTM E2269 – 14 : Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM E2270 – 13 : Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
ASTM E2271 – 05a(2012)e1 : Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities
ASTM E2273 – 03(2011) : Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
ASTM E2274 – 09 : Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
ASTM E2275 – 13 : Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance
ASTM E2276 – 10 : Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults
ASTM E2277 – 14 : Standard Guide for Design and Construction of Coal Ash Structural Fills
ASTM E2278 – 13 : Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage
ASTM E2279 – 09 : Standard Practice for Establishing the Guiding Principles of Property Management
ASTM E228 – 11 : Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM E2280 – 13 : Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ASTM E2281 – 08a(2012)e1 : Standard Practice for Process and Measurement Capability Indices
ASTM E2282 – 13 : Standard Guide for Defining the Test Result of a Test Method
ASTM E2283 – 08 : Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
ASTM E2285 – 08 : Standard Guide for Examination of Mechanical Checkwriter Impressions
ASTM E2286 – 08a : Standard Guide for Examination of Dry Seal Impressions
ASTM E2287 – 09 : Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text
ASTM E2288 – 09 : Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations
ASTM E2289 – 08 : Standard Guide for Examination of Rubber Stamp Impressions
ASTM E2290 – 07a : Standard Guide for Examination of Handwritten Items
ASTM E2292 – 04(2012) : Standard Practice for Investigation of Investigating Carbon Monoxide Poisoning Incidents
ASTM E2293 – 03(2013) : Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury
ASTM E2294 – 03(2013) : Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry
ASTM E2295 – 13 : Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
ASTM E2296 – 03(2013) : Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry
ASTM E2297 – 04(2010) : Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM E2298 – 13a : Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2299 – 13 : Standard Guide for Sensory Evaluation of Products by Children and Minors
ASTM E23 – 12c : Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E230 / E230M – 12 : Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
ASTM E2300 – 09 : Standard Specification for Highway Traffic Monitoring Devices
ASTM E2301 – 12 : Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
ASTM E2302 – 03a(2009) : Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
ASTM E2303 – 11e1 : Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
ASTM E2304 – 03(2011) : Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System
ASTM E2306 – 13 : Standard Practice for Disposal of Personal Property
ASTM E2307 – 10 : Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E2309 / E2309M – 05(2011)e1 : Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM E2310 – 04(2009) : Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
ASTM E2311 – 04(2009) : Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
ASTM E2312 – 11 : Standard Practice for Tests of Cleanroom Materials
ASTM E2313 – 08 : Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
ASTM E2314 – 03(2008) : Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM E2315 – 03(2008) : Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure
ASTM E2316 – 03(2009) : Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E2317 – 04(2012) : Standard Guide for Conducting Renewal Microplate-Based Life-Cycle Toxicity Tests with a Marine Meiobenthic Copepod
ASTM E2319 – 04(2011) : Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM E2320 – 04(2012) : Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
ASTM E2321 – 03(2011) : Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
ASTM E2322 – 03(2009) : Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
ASTM E2324 – 04(2011) : Standard Guide for PDD Paired Testing
ASTM E2326 – 14 : Standard Practice for Education and Training of Seized-Drug Analysts
ASTM E2327 – 10 : Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
ASTM E2329 – 10 : Standard Practice for Identification of Seized Drugs
ASTM E2330 – 12 : Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM E2334 – 09(2013)e1 : Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
ASTM E2335 – 12 : Standard Guide for Laboratory Monitors
ASTM E2336 – 04(2013) : Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM E2337 / E2337M – 10 : Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing
ASTM E2338 – 11 : Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards
ASTM E2339 – 11 : Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
ASTM E2340 / E2340M – 11e1 : Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E2341 / E2341M – 05(2009) : Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
ASTM E2342 – 10 : Standard Test Method for Durability Testing of Duct Sealants
ASTM E2344 – 04(2011) : Standard Guide for Data Capture through the Dictation Process
ASTM E2346 / E2346M – 14 : Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM E2347 – 11 : Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2348 – 06(2010) : Standard Guide for Framework for a Consensus-based Environmental Decision-making Process
ASTM E2349 – 12 : Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
ASTM E235 / E235M – 12 : Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
ASTM E2350 – 07(2013) : Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems
ASTM E2351 – 04a(2013) : Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality
ASTM E2352 – 04(2010) : Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
ASTM E2353 – 06 : Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
ASTM E2354 – 10 : Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
ASTM E2355 – 10 : Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
ASTM E2356 – 14 : Standard Practice for Comprehensive Building Asbestos Surveys
ASTM E2357 – 11 : Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
ASTM E2358 – 04(2010) : Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
ASTM E2359 / E2359M – 13 : Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
ASTM E236 – 66(2011) : Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups
ASTM E2360 – 04(2010) : Specification for Cryptolaemus montrouzieri Mulsant (Coleoptera: Coccinellidae)
ASTM E2361 – 13 : Standard Guide for Testing Leave-On Products Using In-Situ Methods
ASTM E2362 – 09 : Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection
ASTM E2363 – 06a : Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
ASTM E2364 – 04(2010) : Standard Guide to Speech Recognition Technology Products in Health Care
ASTM E2365 – 14 : Standard Guide for Environmental Compliance Performance Assessment
ASTM E2367 – 05(2014) : Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
ASTM E2368 – 10 : Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E2369 – 12 : Standard Specification for Continuity of Care Record (CCR)
ASTM E237 – 02(2012) : Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
ASTM E2371 – 13 : Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E2373 – 09 : Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM E2374 – 10 : Standard Guide for Acoustic Emission System Performance Verification
ASTM E2375 – 08(2013) : Standard Practice for Ultrasonic Testing of Wrought Products
ASTM E2377 – 10 : Standard Specification for Shelter, Electrical Equipment, Lightweight
ASTM E2378 – 13 : Standard Practice for the Recognition of Impaired or Retired Personal Property
ASTM E238 – 12 : Standard Test Method for Pin-Type Bearing Test of Metallic Materials
ASTM E2380 / E2380M – 09 : Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E2381 – 04(2010) : Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams
ASTM E2382 – 04(2012) : Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM E2385 – 11 : Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
ASTM E2386 – 04(2011) : Standard Guide for the Conduct of PDD Screening Examinations
ASTM E2387 – 05(2011) : Standard Practice for Goniometric Optical Scatter Measurements
ASTM E2388 – 11 : Standard Guide for Minimum Training Requirements for Forensic Document Examiners
ASTM E2390 – 06 : Standard Guide for Examination of Documents Produced with Toner Technology
ASTM E2392 / E2392M – 10e1 : Standard Guide for Design of Earthen Wall Building Systems
ASTM E2393 – 10a : Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
ASTM E2394 – 11 : Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
ASTM E2395 – 06(2013) : Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact
ASTM E2396 – 11 : Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
ASTM E2397 – 11 : Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
ASTM E2398 – 11 : Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems
ASTM E2399 – 11 : Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems
ASTM E2400 – 06 : Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems
ASTM E2402 – 11 : Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2403 – 06(2012) : Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2404 – 13e1 : Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact
ASTM E2406 – 09 : Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
ASTM E2407 – 04(2009) : Standard Test Method for Effectiveness of Defoaming Agents
ASTM E2408 – 04(2009) : Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
ASTM E2409 – 13 : Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)
ASTM E241 – 09(2014)e1 : Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E2412 – 10 : Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E2413 – 04(2009) : Standard Guide for Hospital Preparedness and Response
ASTM E2415 – 05(2012) : Standard Practice for Installing Piezoelectric Highway Traffic Sensors
ASTM E2418 – 06 : Standard Guide for Readily Observable Mold and Conditions Conducive to Mold in Commercial Buildings: Baseline Survey Process
ASTM E242 – 01(2010) : Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed
ASTM E2420 – 10 : Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities
ASTM E2421 – 10 : Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
ASTM E2422 – 11 : Standard Digital Reference Images for Inspection of Aluminum Castings
ASTM E2425 – 11 : Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2426 – 10 : Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
ASTM E2427 – 13 : Standard Test Method for Acceptance by Performance Testing for Sieves
ASTM E2428 – 08 : Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
ASTM E243 – 13 : Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
ASTM E2430 / E2430M – 13 : Standard Specification For Expanded Polystyrene (“EPS”) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (“EIFS”)
ASTM E2431 – 12 : Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
ASTM E2432 – 11 : Standard Guide for General Principles of Sustainability Relative to Buildings
ASTM E2435 – 05(2010)e1 : Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties
ASTM E2436 – 05(2010) : Standard Specification for the Representation of Human Characteristics Data in Healthcare Information Systems
ASTM E2439 – 09 : Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E2443 – 05(2010)e1 : Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
ASTM E2444 – 11e1 – Terminology Relating to Measurements Taken on Thin, Reflecting Films
ASTM E2445 – 05(2010) : Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems
ASTM E2446 – 05(2010) : Standard Practice for Classification of Computed Radiology Systems
ASTM E2448 – 11 : Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
ASTM E2449 – 05(2013) : Standard Guide for Irradiation of Pre-packaged Processed Meat and Poultry Products to Control Pathogens and Other Microorganisms
ASTM E2450 – 11 : Standard Practice for Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments
ASTM E2451 – 13 : Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
ASTM E2452 – 12 : Standard Practice for Equipment Management Process Maturity (EMPM) Model
ASTM E2453 – 13 : Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property
ASTM E2454 – 05(2011) : Standard Guide for Sensory Evaluation Methods to Determine the Sensory Shelf Life of Consumer Products
ASTM E2455 – 06(2013) : Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels
ASTM E2456 – 06(2012) : Standard Terminology Relating to Nanotechnology
ASTM E2457 – 07(2013) : Standard Terminology for Healthcare Informatics
ASTM E2458 – 10 : Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces
ASTM E2459 – 05(2011) : Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
ASTM E246 – 10 : Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
ASTM E2461 – 12 : Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
ASTM E2462 – 10 : Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
ASTM E2463 – 11 : Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
ASTM E2465 – 13 : Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E2466 – 13 : Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology
ASTM E2467 – 05(2012) : Standard Practice for Developing Axle Count Adjustment Factors
ASTM E2468 – 05(2012) : Standard Practice for Metadata to Support Archived Data Management Systems
ASTM E2469 – 08a : Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
ASTM E247 – 01(2010) : Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM E2470 – 09 : Standard Specification for Polyester Grade Ethylene Glycol
ASTM E2471 – 05(2011)e1 : Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM E2472 – 12e1 : Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E2473 – 05(2011) : Standard Practice for the Occupational/Environmental Health View of the Electronic Health Record
ASTM E2474 – 14 : Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology
ASTM E2475 – 10 : Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
ASTM E2476 – 09 : Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture
ASTM E2478 – 11 : Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
ASTM E2479 – 11 : Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
ASTM E248 – 12 : Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
ASTM E2480 – 12 : Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM E2481 – 12 : Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules
ASTM E2484 – 08 : Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
ASTM E2485 / E2485M – 13 : Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
ASTM E2486 / E2486M – 13 : Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
ASTM E2488 – 09 : Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
ASTM E2489 – 11 : Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2490 – 09 : Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM E2491 – 13 : Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
ASTM E2492 – 07(2012) : Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
ASTM E2493 – 07 : Standard Guide for the Collection of Non-Volatile Memory Data in Evidentiary Vehicle Electronic Control Units
ASTM E2494 – 08 : Standard Guide for Examination of Typewritten Items
ASTM E2495 – 13 : Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition
ASTM E2497 – 11 : Standard Practice for Calculation of Asset Movement Velocity (AMV)
ASTM E2499 – 11 : Standard Practice for Classification of Asset Physical Location Information
ASTM E2500 – 13 : Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
ASTM E2501 – 11 : Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
ASTM E2502 – 06(2011) : Standard Guide for Medical Transcription Workstations
ASTM E2503 – 13 : Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus
ASTM E2505 – 07(2014) : Standard Practice for Industrial Rope Access
ASTM E2506 – 11 : Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
ASTM E2509 – 08 : Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM E251 – 92(2009) : Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM E2510 – 07(2013) : Standard Test Method for Torque Calibration or Conformance of Rheometers
ASTM E2511 – 09 : Standard Guide for Detailing of EIFS-Clad Wall Assemblies
ASTM E2513 – 07(2012) : Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
ASTM E2514 – 08 : Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
ASTM E2515 – 11 : Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM E2516 – 11 : Standard Classification for Cost Estimate Classification System
ASTM E2517 – 13 : Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)
ASTM E2518 – 11 : Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)
ASTM E252 – 06(2013) : Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM E2520 – 07 : Standard Practice for Verifying Minimum Acceptable Performance of Trace Explosive Detectors
ASTM E2521 – 07a : Standard Terminology for Urban Search and Rescue Robotic Operations
ASTM E2522 – 07(2013) : Standard Guide for Quality Indicators for Health Classifications
ASTM E2523 – 13 : Standard Terminology for Metalworking Fluids and Operations
ASTM E2524 – 08(2013) : Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM E2525 – 08(2013) : Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies
ASTM E2526 – 08(2013) : Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells
ASTM E2527 – 09 : Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight
ASTM E2529 – 06(2014) : Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E253 – 13a : Standard Terminology Relating to Sensory Evaluation of Materials and Products
ASTM E2530 – 06 : Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps
ASTM E2531 – 06e1 : Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface
ASTM E2532 – 09 : Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
ASTM E2533 – 09 : Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM E2534 – 10 : Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
ASTM E2535 – 07(2013) : Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings
ASTM E2536 – 14 : Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2537 – 08 : Standard Guide for Application of Continuous Quality Verification to Pharmaceutical and Biopharmaceutical Manufacturing
ASTM E2538 – 06(2011) : Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures
ASTM E2539 – 12 : Standard Practice for Multiangle Color Measurement of Interference Pigments
ASTM E2540 – 08 : Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM E2541 – 10 : Standard Guide for Stakeholder-Focused, Consensus-Based Disaster Restoration Process for Contaminated Assets
ASTM E2542 – 08(2014) : Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
ASTM E2543 – 08(2014) : Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
ASTM E2544 – 11a : Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2545 – 07(2012) : Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras
ASTM E2546 – 07 : Standard Practice for Instrumented Indentation Testing
ASTM E2548 – 11e1 : Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
ASTM E2549 – 14 : Standard Practice for Validation of Seized-Drug Analytical Methods
ASTM E255 – 07 : Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM E2550 – 11 : Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2551 – 13 : Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2552 – 08 : Standard Guide for Assessing the Environmental and Human Health Impacts of New Energetic Compounds
ASTM E2553 – 07(2013) : Standard Guide for Implementation of a Voluntary Universal Healthcare Identification System
ASTM E2554 – 13 : Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM E2555 – 07(2012) : Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection
ASTM E2556 / E2556M – 10 : Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
ASTM E2557 – 07 : Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
ASTM E2558 – 13 : Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
ASTM E256 – 09 : Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM E2560 – 13 : Standard Specification for Data Format for Pavement Profile
ASTM E2561 – 07a(2012) : Standard Practice for the Installation of Inductive Loop Detectors
ASTM E2562 – 12 : Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor
ASTM E2563 – 13 : Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method
ASTM E2564 – 13 : Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method
ASTM E2565 – 09 : Standard Guide for Consensus-based Process for an Occupational Safety and Health Standard that Includes an Occupational Exposure Guideline
ASTM E2566 – 08 : Standard Test Method for Determining Visual Acuity and Field of View of On-Board Video Systems for Teleoperation of Robots for Urban Search and Rescue Applications
ASTM E2567 – 13a : Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
ASTM E2568 – 09e1 : Standard Specification for PB Exterior Insulation and Finish Systems
ASTM E2570 – 07 : Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
ASTM E2573 – 12 : Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E2574 / E2574M – 12a : Standard Test Method for Fire Testing of School Bus Seat Assemblies
ASTM E2575 – 08 : Standard Test Method for Determination of Oxygen in Copper and Copper Alloys
ASTM E2578 – 07(2012) : Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2579 – 13 : Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM E258 – 07 : Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method
ASTM E2580 – 12 : Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
ASTM E2581 – 07 : Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications
ASTM E2582 – 07 : Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
ASTM E2583 – 07(2011) : Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM E2584 – 14 : Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM E2585 – 09 : Standard Practice for Thermal Diffusivity by the Flash Method
ASTM E2586 – 13 : Standard Practice for Calculating and Using Basic Statistics
ASTM E2587 – 12 : Standard Practice for Use of Control Charts in Statistical Process Control
ASTM E2589 – 11 : Standard Terminology Relating to Nonsieving Methods of Powder Characterization
ASTM E259 – 06(2011) : Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
ASTM E2590 – 09 : Standard Guide for Conducting Hazard Analysis-Critical Control Point (HACCP) Evaluations
ASTM E2591 – 07(2013) : Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians
ASTM E2592 – 07 : Standard Practice for Evaluating Cache Packaged Weight and Volume of Robots for Urban Search and Rescue
ASTM E2593 – 12 : Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
ASTM E2594 – 09(2014) : Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM E2595 – 07(2013) : Standard Guide for Privilege Management Infrastructure
ASTM E2597 / E2597M – 14 : Standard Practice for Manufacturing Characterization of Digital Detector Arrays
ASTM E2598 / E2598M – 13 : Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
ASTM E2599 – 11 : Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM E260 – 96(2011) : Standard Practice for Packed Column Gas Chromatography
ASTM E2600 – 10 : Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions
ASTM E2601 – 08 : Standard Practice for Radiological Emergency Response
ASTM E2602 – 09 : Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E2603 – 08 : Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E2604 – 09 : Standard Practice for Data Characteristics of Equipment Records
ASTM E2605 – 13 : Standard Practice for Receiving Assets
ASTM E2606 – 13 : Standard Practice for Receipt Notification as a Result of Tangible Asset Movement
ASTM E2607 – 08(2013) : Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements
ASTM E2608 – 08(2014) : Standard Practice for Equipment Control Matrix (ECM)
ASTM E2609 – 08 : Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging
ASTM E261 – 10 : Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM E2610 – 08(2011) : Standard Test Method for Sensory Analysis—Duo-Trio Test
ASTM E2611 – 09 : Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
ASTM E2613 – 14 : Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults
ASTM E2614 – 08 : Standard Guide for Evaluation of Cleanroom Disinfectants
ASTM E2615 – 08 : Standard Specification for Aphidoletes aphidimyza (Rondani) (Diptera: Cecidomyiidae)
ASTM E2616 – 09 : Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations
ASTM E2617 – 10 : Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM E2618 – 13 : Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
ASTM E2619 / E2619M – 09e1 : Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E262 – 13 : Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
ASTM E2620 – 08 : Standard Classification for Program and Project Estimate Summaries
ASTM E2623 – 08e1 : Standard Practice for Reporting Thermometer Calibrations
ASTM E2624 – 09 : Standard Practice for Torque Calibration of Testing Machines and Devices
ASTM E2625 – 09 : Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
ASTM E2626 – 08e1 : Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
ASTM E2627 – 13 : Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM E2629 – 11 : Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
ASTM E263 – 13 : Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
ASTM E2630 – 08(2013) : Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
ASTM E2631 – 09 : Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label
ASTM E2632 / E2632M – 13e1 : Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
ASTM E2634 – 11 : Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
ASTM E2635 – 14 : Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
ASTM E2637 – 13 : Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E2150
ASTM E2638 – 10 : Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room
ASTM E2639 – 12 : Standard Test Method for Blast Resistance of Trash Receptacles
ASTM E264 – 08(2013) : Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
ASTM E2640 – 10 : Standard Guide for Resource Management in Emergency Management and Homeland Security
ASTM E2641 – 09 : Standard Practice for Best Practices for Safe Application of 3D Imaging Technology
ASTM E2642 – 09 : Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors
ASTM E2643 – 09 : Standard Terminology Relating to Natural Multi-Cellular Biological Control Organisms
ASTM E2644 – 08 : Standard Specification for Podisus maculiventris (Say) (Hemiptera: Pentatomidae)
ASTM E2645 – 08 : Standard Specification for Feltiella acarisuga (Vallot) (Diptera: Cecidomyiidae)
ASTM E2646 – 08 : Standard Specification for Amblyseius cucumeris (=Neoseiulus) Oudemans (Acarina: Phytoseiidae)
ASTM E2647 – 13 : Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor with Low Shear and Continuous Flow
ASTM E2649 – 12 : Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
ASTM E265 – 07(2013) : Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
ASTM E2651 – 13 : Standard Guide for Powder Particle Size Analysis
ASTM E2652 – 12 : Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
ASTM E2653 – 09 : Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E2655 – 08 : Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM E2656 – 10 : Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
ASTM E2657 – 11 : Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM E2658 – 11 : Standard Practices for Verification of Speed for Material Testing Machines
ASTM E2659 – 09e1 : Standard Practice for Certificate Programs
ASTM E266 – 11 : Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
ASTM E2660 – 11 : Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
ASTM E2661 / E2661M – 10 : Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
ASTM E2662 – 09 : Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
ASTM E2663 – 11 : Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
ASTM E2664 – 09a : Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
ASTM E2665 – 08 : Standard Specification for Archiving ITS-Generated Traffic Monitoring Data
ASTM E2666 – 09 : Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
ASTM E2667 – 09 : Standard Practice for Acquiring Intersection Turning Movement Traffic Data
ASTM E2668 – 10 : Standard Guide for Emergency Operations Center (EOC) Development
ASTM E2669 – 11 : Standard Digital Reference Images for Titanium Castings
ASTM E2670 – 09 : Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras
ASTM E2671 – 10 : Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property
ASTM E2672 – 09 : Standard Practice for Identification and Categorization of Tooling
ASTM E2674 – 09 : Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss
ASTM E2675 – 09(2014) : Standard Practice for Property Management System Outcomes
ASTM E2676 – 09(2014) : Standard Practice for Tangible Property Mobility Index (MI)
ASTM E2677 – 14 : Standard Test Method for Determining Limits of Detection in Explosive Trace Detectors
ASTM E2678 – 09 : Standard Guide for Education and Training in Computer Forensics
ASTM E2679 – 09 : Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
ASTM E2680 – 09e1 : Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
ASTM E2681 – 13 : Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum
ASTM E2682 – 09 : Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses
ASTM E2683 – 09 : Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM E2684 – 09 : Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
ASTM E2685 – 09 : Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test
ASTM E2686 – 09 : Standard Test Method for Volatile Organic Compound (VOC) Solvents Absorbed/Adsorbed By Simulated Soil Impacted by Pesticide Emulsifiable Concentrate (EC) Applications
ASTM E2688 – 10 : Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM E2690 – 10e2 : Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM E2691 – 11 : Standard Practice for Job Productivity Measurement
ASTM E2692 – 10 : Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,
ASTM E2693 – 09 : Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment
ASTM E2694 – 11 : Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM E2695 – 09 : Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy
ASTM E2696 – 09(2013) : Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
ASTM E2698 – 10 : Standard Practice for Radiological Examination Using Digital Detector Arrays
ASTM E2699 – 13 : Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
ASTM E2700 – 09 : Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
ASTM E2707 – 09 : Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
ASTM E2708 – 10 : Standard Terminology for Personnel Credentialing
ASTM E2709 – 12 : Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM E2710 – 11e1 : Standard Guide for Preservation of Charred Documents
ASTM E2711 – 11 : Standard Guide for Preservation of Liquid Soaked Documents
ASTM E2712 – 09e1 : Standard Test Methods for Forming Superplastic Metallic Sheet
ASTM E2713 – 11 : Standard Guide to Forensic Engineering
ASTM E2714 – 13 : Standard Test Method for Creep-Fatigue Testing
ASTM E2715 – 09 : Standard Practice for Moveable Property Storage
ASTM E2716 – 09(2014) : Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM E2717 – 11 : Standard Practice for Estimating the Environmental Load of Residential Wastewater
ASTM E2718 – 10 : Standard Guide for Financial Disclosures Attributed to Climate Change
ASTM E2719 – 09(2014) : Standard Guide for Fluorescence—Instrument Calibration and Qualification
ASTM E272 – 10 : Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
ASTM E2720 – 10 : Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Air-Permeable Materials when Challenged with Biological Aerosols Containing Human Pathogenic Viruses
ASTM E2721 – 10 : Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Surfaces When Challenged with Droplets Containing Human Pathogenic Viruses
ASTM E2722 – 09 : Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media
ASTM E2725 – 10 : Standard Guide for Basic Assessment and Management of Greenhouse Gases
ASTM E2726 / E2726M – 12a : Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
ASTM E2727 – 10 : Standard Practice for Assessment of Rainwater Quality
ASTM E2728 – 11 : Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
ASTM E2729 – 09 : Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM E273 – 10 : Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
ASTM E2730 – 10 : Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM E2731 – 09 : Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event
ASTM E2732 – 11 : Standard Practice for Responder Family Support Service
ASTM E2733 – 10 : Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems
ASTM E2734 / E2734M – 10 : Standard Specification for Dimensions of Knife-Edge Flanges
ASTM E2735 – 14 : Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
ASTM E2736 – 10 : Standard Guide for Digital Detector Array Radiology
ASTM E2737 – 10 : Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
ASTM E2738 – 13e1 : Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
ASTM E2739 – 10 : Standard Specification for Personnel Decontamination System to be Used During a Chemical Event
ASTM E274 / E274M – 11 : Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM E2740 – 12e1 : Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
ASTM E2741 – 11 : Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
ASTM E2742 – 11 : Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
ASTM E2743 – 11 : Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
ASTM E2744 – 10 : Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2745 – 11 : Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
ASTM E2746 – 11 : Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
ASTM E2747 – 11 : Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
ASTM E2748 – 12a : Standard Guide for Fire-Resistance Experiments
ASTM E2749 – 10(2014) : Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E275 – 08(2013) : Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E2750 – 13e1 : Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM
ASTM E2751 / E2751M – 13 : Standard Practice for Design and Performance of Supported Laminated Glass Walkways
ASTM E2752 – 10 : Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
ASTM E2753 – 10 : Standard Specification for Eretmocerus eremicus Rose and Zolnerowich (Hymenoptera: Aphelinidae)
ASTM E2754 – 10 : Standard Specification for Delphastus catalinae (Horn) (Coleoptera:Coccinellidae)
ASTM E2755 – 10 : Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hand Sanitizer Formulations Using Hands of Adults
ASTM E2756 – 10 : Standard Terminology Relating to Antimicrobial and Antiviral Agents
ASTM E2758 – 10 : Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM E2759 – 10 : Standard Practice for Highway Traffic Monitoring Truth-in-Data
ASTM E276 – 13 : Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E2760 – 10e2 : Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E2869 – 13 : Standard Digital Reference Images for Magnesium Castings
ASTM E287 – 02(2012) : Standard Specification for Laboratory Glass Graduated Burets
ASTM E2870 – 13 : Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling
ASTM E2871 – 13 : Standard Test Method for Evaluating Disinfectant Efficacy Against Pseudomonas aeruginosa Biofilm Grown in CDC Biofilm Reactor Using Single Tube Method
ASTM E2872 – 14 : Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
ASTM E2875 / E2875M – 12 : Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
ASTM E2876 – 13 : Standard Guide for Integrating Sustainable Objectives into Cleanup
ASTM E2877 – 12e1 : Standard Guide for Digital Contact Thermometers
ASTM E288 – 10 : Standard Specification for Laboratory Glass Volumetric Flasks
ASTM E2880 – 14 : Standard Terminology Related to Biorationals
ASTM E2881 – 13 : Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
ASTM E2882 – 12 : Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
ASTM E2883 – 13 : Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)
ASTM E2884 – 13 : Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays
ASTM E2885 – 13 : Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications
ASTM E2886 / E2886M – 14 : Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement
ASTM E2888 – 12 : Standard Practice for Process for Inactivation of Rodent Retrovirus by pH
ASTM E2889 – 12 : Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment
ASTM E289 – 04(2010) : Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM E2890 – 12 : Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
ASTM E2891 – 13 : Standard Guide for Multivariate Data Analysis in Pharmaceutical Development and Manufacturing Applications
ASTM E2893 – 13e1 : Standard Guide for Greener Cleanups
ASTM E2894 – 13 : Standard Test Method for Applying Aerosolized Bacillus Spores as Dry Inocula to Inanimate Surfaces
ASTM E2895 – 13 : Standard Test Method for Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium
ASTM E2896 – 12 : Standard Test Method for Quantitative Petri Plate Method (QPM) for Determining the Effectiveness of Antimicrobial Towelettes
ASTM E2897 – 12 : Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex vivo Porcine Skin
ASTM E2898 – 13 : Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E2899 – 13 : Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E29 – 13 : Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E290 – 13 : Standard Test Methods for Bend Testing of Material for Ductility
ASTM E2900 – 12 : Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout
ASTM E2902 – 12 : Standard Practice for Measurement of Body Armor Wearers
ASTM E2903 – 13 : Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
ASTM E2904 – 12 : Standard Practice for Characterization and Verification of Phased Array Probes
ASTM E2905 / E2905M – 13 : Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
ASTM E2906 / E2906M – 13 : Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
ASTM E2907 / E2907M – 13 : Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
ASTM E2908 – 12 : Standard Guide for Fire Prevention for Photovoltaic Panels, Modules, and Systems
ASTM E2909 – 13 : Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations
ASTM E291 – 09 : Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
ASTM E2910 – 12 : Standard Guide for Preferred Methods for Acceptance of Product
ASTM E2911 – 13 : Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM E2912 – 13 : Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
ASTM E2913 – 14 : Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
ASTM E2914 – 14 : Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
ASTM E2915 – 13 : Standard Guide for Emergency Operations Center (EOC) Management
ASTM E2916 – 13 : Standard Terminology for Digital and Multimedia Evidence Examination
ASTM E2918 – 13 : Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2919 – 13 : Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose
ASTM E292 – 09e1 : Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM E2920 – 14 : Standard Guide for Recording Occupational Injuries and Illnesses
ASTM E2921 – 13 : Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes and Rating Systems
ASTM E2923 – 14 : Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM E2924 – 14 : Standard Practice for Intumescent Coatings
ASTM E2925 – 14 : Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function
ASTM E2926 – 13 : Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry
ASTM E2927 – 13 : Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM E2928 / E2928M – 13 : Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
ASTM E2929 – 13 : Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction
ASTM E2930 – 13 : Standard Practice for Pressure Decay Leak Test Method
ASTM E2931 – 13 : Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM E2933 – 13 : Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications
ASTM E2934 – 13 : Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods
ASTM E2935 – 13 : Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E2936 – 13 : Standard Guide for Contractor Self Assessment for U.S. Government Property Management Systems
ASTM E2937 – 13 : Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
ASTM E2939 – 13 : Standard Practice for Determining Reporting Conditions and Expected Capacity for Photovoltaic Non-Concentrator Systems
ASTM E2941 – 13 : Standard Practice for Nitric Acid-Extraction of Elements from Ores and Related Metallurgical Materials by Closed Vessel Microwave Heating
ASTM E2945 – 14 : Standard Test Method for Film Permeability Determination Using Static Permeability Cells
ASTM E2946 – 13 : Standard Test Method for Determining the Bacteria-Reducing Effectiveness of Food-Handler Handwash Formulations Using Hands of Adults
ASTM E295 – 82(2014) : Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM E2950 – 14 : Standard Specification for Metal Canopy Systems
ASTM E2951 – 13 : Standard Guide for Community Emergency Preparedness for Persons with Disabilities
ASTM E2952 – 14 : Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED)
ASTM E2955 – 13 : Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
ASTM E2956 – 14 : Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels
ASTM E2958 – 14 : Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM E296 – 70(2010) : Standard Practice for Ionization Gage Application to Space Simulators
ASTM E2962 – 14 : Standard Guide for Fleet Management
ASTM E2966 – 14 : Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
ASTM E298 – 08 : Standard Test Methods for Assay of Organic Peroxides
ASTM E299 – 08 : Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM E3 – 11 : Standard Guide for Preparation of Metallographic Specimens
ASTM E300 – 03(2009) : Standard Practice for Sampling Industrial Chemicals
ASTM E303 – 93(2013) : Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E305 – 13 : Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM E307 – 72(2014) : Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E308 – 13 : Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM E309 – 11 : Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM E310 – 10 : Standard Reference Radiographs for Tin Bronze Castings
ASTM E312 – 06(2011) : Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)
ASTM E313 – 10 : Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM E314 – 10 : Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques
ASTM E316 – 11 : Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
ASTM E317 – 11 : Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
ASTM E319 – 85(2008) : Standard Practice for the Evaluation of Single-Pan Mechanical Balances
ASTM E32 – 86(2006)e1 : Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM E321 – 96(2012) : Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
ASTM E322 – 12 : Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E323 – 11 : Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E328 – 13 : Standard Test Methods for Stress Relaxation Tests for Materials and Structures
ASTM E329 – 14 : Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E330 / E330M – 14 : Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E331 – 00(2009) : Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E334 – 01(2013) : Standard Practice for General Techniques of Infrared Microanalysis
ASTM E336 – 11 : Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
ASTM E337 – 02(2007) : Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E34 – 11e1 : Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
ASTM E340 – 13 : Standard Test Method for Macroetching Metals and Alloys
ASTM E341 – 08 : Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
ASTM E342 – 11 : Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
ASTM E344 – 13 – Terminology Relating to Thermometry and Hydrometry
ASTM E345 – 93(2013)e1 : Standard Test Methods of Tension Testing of Metallic Foil
ASTM E346 – 08e1 : Standard Test Methods for Analysis of Methanol
ASTM E349 – 06(2014) : Standard Terminology Relating to Space Simulation
ASTM E350 – 12 : Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
ASTM E351 – 13 : Standard Test Methods for Chemical Analysis of Cast Iron—All Types
ASTM E352 – 13 : Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
ASTM E353 – 93(2006) : Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM E354 – 93(2006) : Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E355 – 96(2014) : Standard Practice for Gas Chromatography Terms and Relationships
ASTM E359 – 10 : Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
ASTM E363 – 09 : Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
ASTM E367 – 09 : Standard Test Methods for Chemical Analysis of Ferroniobium
ASTM E37 – 05(2011) : Standard Test Methods for Chemical Analysis of Pig Lead
ASTM E372 – 13 : Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration
ASTM E376 – 11 : Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
ASTM E377 – 08 : Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E381 – 01(2012) : Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
ASTM E382 – 12 : Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM E384 – 11e1 : Standard Test Method for Knoop and Vickers Hardness of Materials
ASTM E385 – 11 : Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM E386 – 90(2011) : Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy
ASTM E387 – 04(2009) : Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E388 – 04(2009) : Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,
ASTM E389 – 13 : Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM E390 – 11 : Standard Reference Radiographs for Steel Fusion Welds
ASTM E393 – 13 : Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
ASTM E394 – 09 : Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM E396 – 12e1 : Standard Test Methods for Chemical Analysis of Cadmium
ASTM E398 – 13 : Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM E399 – 12e3 : Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E4 – 13 : Standard Practices for Force Verification of Testing Machines
ASTM E405 – 04(2012) : Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM E406 – 81(2012) : Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
ASTM E407 – 07e1 : Standard Practice for Microetching Metals and Alloys
ASTM E408 – 13 : Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E41 – 92(2010) – Terminology Relating to Conditioning
ASTM E410 – 08 : Standard Test Method for Moisture and Residue in Liquid Chlorine
ASTM E411 – 12 : Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
ASTM E413 – 10 – Classification for Rating Sound Insulation
ASTM E415 – 14 : Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E422 – 05(2011) : Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM E423 – 71(2014) : Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM E424 – 71(2007) : Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
ASTM E426 – 12 : Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
ASTM E428 – 08(2013) : Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
ASTM E430 – 11 : Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM E431 – 96(2011) : Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
ASTM E432 – 91(2011) : Standard Guide for Selection of a Leak Testing Method
ASTM E433 – 71(2013) : Standard Reference Photographs for Liquid Penetrant Inspection
ASTM E434 – 10 : Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM E436 – 03(2008) : Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM E438 – 92(2011) : Standard Specification for Glasses in Laboratory Apparatus
ASTM E439 – 10 : Standard Test Methods for Chemical Analysis of Beryllium
ASTM E444 – 09 : Standard Guide for Scope of Work of Forensic Document Examiners
ASTM E445 / E445M – 88(2013) : Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
ASTM E446 – 10 : Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM E448 – 82(2008) : Standard Practice for Scleroscope Hardness Testing of Metallic Materials
ASTM E449 – 08(2013) : Standard Test Methods for Analysis of Calcium Chloride
ASTM E45 – 13 : Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E452 – 02(2013) : Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
ASTM E454 – 12 : Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E455 – 11 : Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
ASTM E456 – 13ae1 : Standard Terminology Relating to Quality and Statistics
ASTM E457 – 08 : Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E458 – 08 : Standard Test Method for Heat of Ablation
ASTM E459 – 05(2011) : Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM E460 – 12 : Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
ASTM E463 – 09 : Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry
ASTM E465 – 11 : Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
ASTM E466 – 07 : Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E467 – 08e1 : Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
ASTM E468 – 11 : Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
ASTM E471 – 96(2011) : Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
ASTM E473 – 11a : Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E475 – 10 : Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
ASTM E477 – 13 : Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM E478 – 08 : Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E479 – 91(2006) : Standard Guide for Preparation of a Leak Testing Specification
ASTM E481 – 10 : Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver
ASTM E482 – 11e1 : Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)
ASTM E487 – 14 : Standard Test Method for Constant-Temperature Stability of Chemical Materials
ASTM E488 / E488M – 10 : Standard Test Methods for Strength of Anchors in Concrete Elements
ASTM E490 – 00a(2014) : Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
ASTM E491 – 73(2010) : Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
ASTM E492 – 09 : Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
ASTM E493 / E493M – 11 : Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E494 – 10 : Standard Practice for Measuring Ultrasonic Velocity in Materials
ASTM E496 – 14e1 : Standard Test Method for Measuring Neutron Fluence and Average Energy from?3H(d,n) 4He Neutron Generators by Radioactivation Techniques
ASTM E498 / E498M – 11 : Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E499 / E499M – 11 : Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E50 – 11 : Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM E501 – 08 : Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
ASTM E502 – 07(2013) : Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E505 – 01(2011) : Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
ASTM E506 – 08 : Standard Test Method for Mercury in Liquid Chlorine
ASTM E507 – 13 : Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E508 – 13 : Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E509 / E509M – 14 : Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels
ASTM E511 – 07 : Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
ASTM E512 – 94(2010) : Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
ASTM E514 / E514M – 14 : Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM E515 – 11 : Standard Practice for Leaks Using Bubble Emission Techniques
ASTM E516 – 95a(2013) : Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM E517 – 00(2010) : Standard Test Method for Plastic Strain Ratio r for Sheet Metal
ASTM E518 / E518M – 10 : Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E519 / E519M – 10 : Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM E520 – 08 : Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM E521 – 96(2009)e1 : Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
ASTM E523 – 11 : Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
ASTM E524 – 08 : Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
ASTM E526 – 08(2013) : Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
ASTM E527 – 12 : Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM E529 – 04(2011) : Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM E53 – 07(2013) : Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM E531 – 13 : Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM E534 – 13 : Standard Test Methods for Chemical Analysis of Sodium Chloride
ASTM E535 – 14 : Standard Practice for Preparation of Fire-Test-Response Standards
ASTM E536 – 08 : Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ASTM E537 – 12 : Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM E538 – 98(2008) : Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
ASTM E539 – 11 : Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
ASTM E541 – 10 : Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
ASTM E542 – 01(2012) : Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM E543 – 13 : Standard Specification for Agencies Performing Nondestructive Testing
ASTM E544 – 10 : Standard Practices for Referencing Suprathreshold Odor Intensity
ASTM E545 – 14 : Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
ASTM E546 – 08 : Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
ASTM E547 – 00(2009) : Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
ASTM E549 – 87(2008) : Standard Guide for Preparing Field Sprayer Calibration Procedures
ASTM E55 – 11 : Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM E550 – 87(2008) : Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
ASTM E556 / E556M – 11 : Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
ASTM E557 – 12 : Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
ASTM E561 – 10e2 : Standard Test Method for K-R Curve Determination
ASTM E562 – 11 : Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E563 – 11 : Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
ASTM E564 – 06(2012) : Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E566 – 09 : Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
ASTM E569 / E569M – 13 : Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
ASTM E570 – 09 : Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ASTM E571 – 12 : Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
ASTM E572 – 13 : Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E573 – 01(2013) : Standard Practices for Internal Reflection Spectroscopy
ASTM E574 – 13 : Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
ASTM E575 – 05(2011) : Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
ASTM E576 – 08 : Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
ASTM E578 – 07(2013) : Standard Test Method for Linearity of Fluorescence Measuring Systems
ASTM E579 – 04(2009) : Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
ASTM E580 / E580M – 14 : Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
ASTM E581 – 10 : Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
ASTM E582 – 07(2013)e1 : Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
ASTM E585 / E585M – 12 : Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
ASTM E587 – 10 : Standard Practice for Ultrasonic Angle-Beam Contact Testing
ASTM E588 – 03(2009) : Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
ASTM E592 – 99(2009)e1 : Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60
ASTM E594 – 96(2011) : Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
ASTM E595 – 07 : Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E596 – 96(2009) : Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E598 – 08 : Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
ASTM E6 – 09be1 : Standard Terminology Relating to Methods of Mechanical Testing
ASTM E60 – 11 : Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
ASTM E601 – 07a(2013) : Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
ASTM E603 – 13 : Standard Guide for Room Fire Experiments
ASTM E604 – 83(2008) : Standard Test Method for Dynamic Tear Testing of Metallic Materials
ASTM E605 – 93(2011) : Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
ASTM E606 / E606M – 12 : Standard Test Method for Strain-Controlled Fatigue Testing
ASTM E608 / E608M – 13 : Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
ASTM E609 – 10 : Standard Terminology Relating to Pesticides
ASTM E611 – 08 : Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
ASTM E617 – 13 : Standard Specification for Laboratory Weights and Precision Mass Standards
ASTM E618 – 07(2013) : Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
ASTM E619 – 09 : Standard Practice for Evaluating Foreign Odors in Paper Packaging
ASTM E620 – 11 : Standard Practice for Reporting Opinions of Scientific or Technical Experts
ASTM E631 – 06 : Standard Terminology of Building Constructions
ASTM E633 – 13 : Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
ASTM E634 – 12 : Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry
ASTM E636 – 14 : Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E?706 (IH)
ASTM E637 – 05(2011) : Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM E640 – 06(2012) : Standard Test Method for Preservatives in Water-Containing Cosmetics
ASTM E641 – 01(2012)e1 : Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
ASTM E642 – 91(2008) : Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment
ASTM E643 – 09 : Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM E644 – 11 : Standard Test Methods for Testing Industrial Resistance Thermometers
ASTM E645 – 13 : Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems
ASTM E646 – 07e1 : Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials
ASTM E647 – 13a : Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E648 – 14 : Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM E649 – 00(2011) : Standard Test Method for Bromine in Chlorine
ASTM E650 / E650M – 12 : Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
ASTM E651 / E651M – 01(2008) : Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
ASTM E652 – 91(2009) : Standard Test Method for Nonresidual Liquid Household Insecticides Against Flying Insects
ASTM E653 – 91(2009) : Standard Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying Insects
ASTM E654 – 96(2009) : Standard Test Method for Effectiveness of Aerosol and Pressurized Spray Insecticides Against Cockroaches
ASTM E659 – 14 : Standard Test Method for Autoignition Temperature of Liquid Chemicals
ASTM E660 – 90(2011) : Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM E661 – 03(2009) : Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
ASTM E662 – 13d : Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E664 / E664M – 10 : Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
ASTM E666 – 14 : Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation
ASTM E667 – 98(2009) : Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
ASTM E668 – 13 : Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM E670 – 09 : Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM E671 – 98(2010) : Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM E672 – 87(2011) : Standard Specification for Disposable Glass Micropipets
ASTM E674 – 12 : Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E675 – 02(2012) : Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
ASTM E676 – 02(2012) : Standard Specification for Interchangeable Taper-Ground Joints
ASTM E677 – 94(2010) : Standard Specification for Interchangeable Spherical Ground Joints
ASTM E678 – 07(2013) : Standard Practice for Evaluation of Scientific or Technical Data
ASTM E679 – 04(2011) : Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM E680 – 79(2011)e1 : Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM E681 – 09 : Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E682 – 92(2011) : Standard Practice for Liquid Chromatography Terms and Relationships
ASTM E683 – 91(2013) : Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
ASTM E685 – 93(2013) : Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
ASTM E688 – 94(2011) : Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
ASTM E689 – 10 : Standard Reference Radiographs for Ductile Iron Castings
ASTM E69 – 02(2007) : Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
ASTM E690 – 10 : Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes
ASTM E691 – 14 : Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E693 – 12 : Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E?706(ID)
ASTM E694 – 99(2010) : Standard Specification for Laboratory Glass Volumetric Apparatus
ASTM E695 – 03(2009) : Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
ASTM E696 – 07(2013) : Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
ASTM E697 – 96(2011) : Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
ASTM E698 – 11 : Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
ASTM E699 – 09 : Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
ASTM E7 – 03(2009) : Standard Terminology Relating to Metallography
ASTM E70 – 07 : Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
ASTM E701 – 80(2010) : Standard Test Methods for Municipal Ferrous Scrap
ASTM E702 – 85(2010) : Standard Specification for Municipal Ferrous Scrap
ASTM E703 – 09 : Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals
ASTM E704 – 13 : Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
ASTM E705 – 13a : Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
ASTM E708 – 79(2011) : Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
ASTM E709 – 14 : Standard Guide for Magnetic Particle Testing
ASTM E712 – 80(2009) : Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems
ASTM E714 – 94(2009) : Standard Specification for Disposable Glass Serological Pipets
ASTM E715 – 80(2011) : Standard Specification for Gravity-Convection and Forced-Circulation Water Baths
ASTM E716 – 10 : Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
ASTM E72 – 13a : Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM E720 – 11 : Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
ASTM E721 – 11 : Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
ASTM E722 – 09e1 : Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
ASTM E723 – 13 : Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)
ASTM E724 – 98(2012) : Standard Guide for Conducting Static Acute Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs
ASTM E725 – 96(2012) : Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E726 – 01(2011)e1 : Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM E727 / E727M – 08(2013) : Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E728 – 91(2009) : Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM E729 – 96(2007) : Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
ASTM E73 – 13 : Standard Practice for Static Load Testing of Truss Assemblies
ASTM E732 – 80(2011) : Standard Specification for Disposable Pasteur-Type Pipet
ASTM E734 – 80(2010) : Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
ASTM E736 – 00(2011) : Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
ASTM E738 – 11 : Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry
ASTM E739 – 10 : Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (e-N) Fatigue Data
ASTM E74 – 13a : Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E740 / E740M – 03(2010)e2 : Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM E741 – 11 : Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM E744 – 07 : Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications
ASTM E745 – 80(2009) : Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems
ASTM E746 – 07 : Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E747 – 04(2010) : Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
ASTM E748 – 02(2008) : Standard Practices for Thermal Neutron Radiography of Materials
ASTM E749 / E749M – 12 : Standard Practice for Acoustic Emission Monitoring During Continuous Welding
ASTM E750 – 10 : Standard Practice for Characterizing Acoustic Emission Instrumentation
ASTM E751 / E751M – 12 : Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
ASTM E754 – 80(2006) : Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM E755 – 08 : Standard Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography)
ASTM E756 – 05(2010) : Standard Test Method for Measuring Vibration-Damping Properties of Materials
ASTM E759 – 92(2011) : Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E760 – 92(2011) : Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E761 – 92(2011) : Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E766 – 14 : Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E768 – 99(2010) : Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM E77 – 07 : Standard Test Method for Inspection and Verification of Thermometers
ASTM E772 – 13 : Standard Terminology of Solar Energy Conversion
ASTM E775 – 87(2008)e1 : Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
ASTM E776 – 87(2009) : Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E777 – 08 : Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E778 – 08 : Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E779 – 10 : Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E780 – 06(2011) : Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature
ASTM E781 – 86(2009) : Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates
ASTM E782 – 95(2007) : Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
ASTM E783 – 02(2010) : Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
ASTM E784 – 89(2011) : Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM E785 – 81(2011) : Standard Specification for Crucibles, Ignition, Laboratory, Metal
ASTM E786 – 81(2011) : Standard Specification for Dishes, Evaporating, Platinum
ASTM E787 – 81(2011) : Standard Specification for Disposable Glass Micro Blood Collection Pipets
ASTM E788 – 97(2013) : Standard Specification for Pipet, Blood Diluting
ASTM E790 – 08 : Standard Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample
ASTM E791 – 08 : Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM E793 – 06(2012) : Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E794 – 06(2012) : Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM E795 – 05(2012) : Standard Practices for Mounting Test Specimens During Sound Absorption Tests
ASTM E797 / E797M – 10 : Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
ASTM E798 – 96(2009) : Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
ASTM E799 – 03(2009) : Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
ASTM E8 / E8M – 13a : Standard Test Methods for Tension Testing of Metallic Materials
ASTM E800 – 07 : Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM E801 – 06(2011) : Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
ASTM E802 – 95(2010) : Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness
ASTM E803 – 91(2013) : Standard Test Method for Determining the L/D?Ratio of Neutron Radiography Beams
ASTM E805 – 12a : Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E806 – 08 : Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
ASTM E808 – 01(2009) : Standard Practice for Describing Retroreflection
ASTM E809 – 08(2013) : Standard Practice for Measuring Photometric Characteristics of Retroreflectors
ASTM E81 – 96(2011) : Standard Test Method for Preparing Quantitative Pole Figures
ASTM E810 – 03(2013) : Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
ASTM E811 – 09 : Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM E814 – 13a : Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM E815 – 11 : Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry
ASTM E816 – 05(2010) : Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM E82 – 09 : Standard Test Method for Determining the Orientation of a Metal Crystal
ASTM E821 – 96(2009) : Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E822 – 92(2009) : Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls
ASTM E824 – 10 : Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
ASTM E825 – 98(2009) : Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E826 – 14 : Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
ASTM E827 – 08 : Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
ASTM E83 – 10a : Standard Practice for Verification and Classification of Extensometer Systems
ASTM E831 – 13 : Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E832 – 81(2013) : Standard Specification for Laboratory Filter Papers
ASTM E833 – 14 : Standard Terminology of Building Economics
ASTM E834 – 09 : Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
ASTM E837 – 13a : Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E839 – 11 : Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
ASTM E84 – 14 : Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E840 – 95(2013) : Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
ASTM E841 – 12a : Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry
ASTM E844 – 09 : Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E 706(IIC)
ASTM E848 – 94(2012) : Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
ASTM E850 – 10 : Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill
ASTM E853 – 13 : Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results
ASTM E854 – 03(2009) : Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E855 – 08(2013) : Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E857 – 05(2012) : Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
ASTM E859 – 93(2011) : Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
ASTM E860 – 07(2013)e1 : Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation
ASTM E861 – 13 : Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors
ASTM E864 – 12 : Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E865 – 12 : Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
ASTM E866 – 11 : Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E867 – 06(2012) : Standard Terminology Relating to Vehicle-Pavement Systems
ASTM E870 – 82(2013) : Standard Test Methods for Analysis of Wood Fuels
ASTM E871 – 82(2013) : Standard Test Method for Moisture Analysis of Particulate Wood Fuels
ASTM E872 – 82(2013) : Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM E873 – 82(2013) : Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM E874 – 11 : Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
ASTM E875 – 10 : Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry
ASTM E877 – 13 : Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
ASTM E878 – 12 : Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM E879 – 12 : Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements
ASTM E88 – 11 : Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
ASTM E881 – 92(2009) : Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode
ASTM E882 – 10 : Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
ASTM E883 – 11 : Standard Guide for Reflected–Light Photomicrography
ASTM E884 – 82(2012) : Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
ASTM E887 – 88(2009) : Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
ASTM E889 – 82(2014) : Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM E890 – 94(2009) : Standard Specification for Disposable Glass Culture Tubes
ASTM E894 – 88(2010) : Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
ASTM E898 – 88(2013) : Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM E9 – 09 : Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E90 – 09 : Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
ASTM E900 – 02(2007) : Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, E706 (IIF)
ASTM E903 – 12 : Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
ASTM E905 – 87(2013) : Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
ASTM E906 / E906M – 14 : Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ASTM E908 – 98(2012) : Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E910 – 07(2013) : Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
ASTM E911 – 98(2009) : Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM E915 – 10 : Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E917 – 13 : Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
ASTM E918 – 83(2011) : Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
ASTM E920 – 97(2013) : Standard Specification for Commercially Packaged Laboratory Apparatus
ASTM E921 – 97(2010) : Standard Specification for Export Packaged Laboratory Apparatus
ASTM E923 – 97(2013) : Standard Specification for Glass Westergren Tube, Reusable
ASTM E925 – 09(2014) : Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM E927 – 10 : Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing
ASTM E928 – 08 : Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E930 – 99(2007) : Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E932 – 89(2013) : Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E934 – 94(2009) : Standard Specification for Serological Pipet, Disposable Plastic
ASTM E935 – 13e1 : Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
ASTM E937 – 93(2011) : Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
ASTM E938 / E938M – 12 : Standard Test Method for Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Adult Human Lice
ASTM E939 – 94(2012) : Standard Test Method of Field Testing Topical Applications of Compounds as Repellents for Medically Important and Pest Arthropods (Including Insects, Ticks, and Mites):I Mosquitoes
ASTM E94 – 04(2010) : Standard Guide for Radiographic Examination
ASTM E942 – 96(2011) : Standard Guide for Simulation of Helium Effects in Irradiated Metals
ASTM E943 – 08 : Standard Terminology Relating to Biological Effects and Environmental Fate
ASTM E944 – 13 : Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, E?706 (IIA)
ASTM E945 – 12 : Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry
ASTM E947 – 83(2007) : Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM E948 – 09 : Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E95 – 68(2011) : Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation
ASTM E950 / E950M – 09 : Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
ASTM E951 – 94(2006) : Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin
ASTM E953 / E953M – 08 : Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash
ASTM E955 – 88(2009)e1 : Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
ASTM E956 – 83(2010) : Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
ASTM E957 – 03(2011)e1 : Standard Terminology Relating to Geothermal Energy
ASTM E958 – 13 : Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E959 – 83(2010) : Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment
ASTM E96 / E96M – 13 : Standard Test Methods for Water Vapor Transmission of Materials
ASTM E960 – 93(2013) : Standard Specification for Laboratory Glass Beakers
ASTM E961 – 97(2013) : Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable
ASTM E963 – 95(2010) : Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
ASTM E964 – 06(2010) : Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
ASTM E965 – 96(2006) : Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E966 – 10e1 : Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
ASTM E967 – 08(2014) : Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E968 – 02(2014) : Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E969 – 02(2012) : Standard Specification for Glass Volumetric (Transfer) Pipets
ASTM E970 – 14 : Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM E971 – 11 : Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
ASTM E972 – 96(2013) : Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM E973 – 10 : Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM E974 – 00(2006) : Standard Guide for Specifying Thermal Performance of Geothermal Power Systems
ASTM E975 – 13 : Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
ASTM E976 – 10 : Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
ASTM E977 – 05(2010) : Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
ASTM E979 – 09 : Standard Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
ASTM E981 – 04(2012) : Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
ASTM E982 – 94(2009) : Standard Specification for Laboratory Glass Test Tubes
ASTM E983 – 10 : Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
ASTM E984 – 12 : Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
ASTM E985 – 00(2006) : Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
ASTM E986 – 04(2010) : Standard Practice for Scanning Electron Microscope Beam Size Characterization
ASTM E987 – 88(2009) : Standard Test Methods for Deglazing Force of Fenestration Products
ASTM E989 – 06(2012) : Standard Classification for Determination of Impact Insulation Class (IIC)
ASTM E990 – 13 : Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
ASTM E991 – 11 : Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM E995 – 11 : Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
ASTM E996 – 10 : Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E997 – 12 : Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
ASTM E998 – 12 : Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
ASTM E999 – 10 : Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
ASTM F1000 – 13 : Standard Practice for Piping System Drawing Symbols
ASTM F1001 – 12 : Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
ASTM F1002 – 13 : Standard Performance Specification for Protective Clothing and the Materials from Which It Is Made for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards
ASTM F1003 – 02(2012)e1 : Standard Specification for Searchlights on Motor Lifeboats
ASTM F1004 – 13 : Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
ASTM F1005 – 91(2013) : Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration
ASTM F1006 – 86(2008) : Standard Specification for Entrainment Separators for Use in Marine Piping Applications
ASTM F1007 – 86(2014) : Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
ASTM F1011 – 07(2013) : Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
ASTM F1014 – 02(2012)e1 : Standard Specification for Flashlights on Vessels
ASTM F1015 – 03(2009) : Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces
ASTM F1016 – 07(2013)e1 : Standard Practice for Linear Tire Treadwear Data Analysis
ASTM F1018 – 87a(2010) : Standard Specification for Steel Emergency Gear Stowage Locker
ASTM F1019M – 00(2012) : Standard Specification for Steel Deck Gear Stowage Box [Metric]
ASTM F1020 – 86(2011) : Standard Specification for Line-Blind Valves for Marine Applications
ASTM F1021 – 95(2013) : Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
ASTM F1023 – 12 : Standard Specification for Dispensers, Powdered Iced Tea
ASTM F1025 – 94(2011) : Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
ASTM F1026 – 86(2008)e1 : Standard Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
ASTM F1027 – 86(2012) : Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
ASTM F1030 – 86(2008) : Standard Practice for Selection of Valve Operators
ASTM F1031 – 13 : Standard Practice for Training the Emergency Medical Technician (Basic)
ASTM F1033 – 00(2010) : Standard Test Method for Comparing Lift-Off Correction Media
ASTM F1035 – 03(2008) : Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
ASTM F1037 – 10 : Standard Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic
ASTM F1038 – 02(2011) : Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
ASTM F104 – 11 : Standard Classification System for Nonmetallic Gasket Materials
ASTM F1041 – 02(2008) : Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
ASTM F1042 – 87(2009) : Standard Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers
ASTM F1043 – 13 : Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
ASTM F1044 – 05(2011)e1 : Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
ASTM F1045 – 07(2013) : Standard Performance Specification for Ice Hockey Helmets
ASTM F1046 – 01(2008) : Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
ASTM F1047 – 10 : Standard Specification for Frying and Braising Pans, Tilting Type
ASTM F105 – 72(2010) : Standard Specification for Type 58 Borosilicate Sealing Glass
ASTM F1050 / F1050M – 87(2010)e1 : Standard Test Method for Determining Winding Torque and Tension of Typewriter Ribbons
ASTM F1051 – 00(2009) : Standard Test Method for Comparing Multistrike Film Ribbons
ASTM F1052 – 14 : Standard Test Method for Pressure Testing Vapor Protective Suits
ASTM F1055 – 13 : Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
ASTM F1056 – 04(2011) : Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
ASTM F1057 – 10 : Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
ASTM F1058 – 08 : Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)
ASTM F106 – 12 : Standard Specification for Brazing Filler Metals for Electron Devices
ASTM F1060 – 08 : Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
ASTM F1061 – 08(2013) : Standard Specification for Ski Binding Test Devices
ASTM F1062 – 97(2013) : Standard Test Method for Verification of Ski Binding Test Devices
ASTM F1063 – 09 : Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems
ASTM F1064 – 11 : Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications
ASTM F1066 – 04(2010)e1 : Standard Specification for Vinyl Composition Floor Tile
ASTM F1068 – 90(2012) : Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
ASTM F1069 – 87(2012) : Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
ASTM F1070 – 87(2012) : Standard Specification for Doors, Non-Tight, for Marine Use
ASTM F1071 – 94(2012) : Standard Specification for Expanded-Metal Bulkhead Panels
ASTM F1072 – 94(2012) : Standard Specification for Expanded-Metal Doors
ASTM F1073 – 87(2012) : Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
ASTM F1074 – 87(2012) : Standard Specification for Cleats, Welded Horn Type
ASTM F1075 – 97(2008) : Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
ASTM F1076 – 87(2010) : Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
ASTM F1078 – 10(2011) : Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
ASTM F1079 – 87(2008)e1 : Standard Specification for Inserted and Noninserted Surgical Scissors
ASTM F1080 – 93(2013) : Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
ASTM F1081 – 09 : Standard Specification for Competition Wrestling Mats
ASTM F1083 – 13 : Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
ASTM F1084 – 08(2013) : Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM F1085 – 10 : Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
ASTM F1086 – 94(2008) : Standard Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations
ASTM F1087 – 02(2009) : Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
ASTM F1088 – 04a(2010) : Standard Specification for Beta-Tricalcium Phosphate for Surgical Implantation
ASTM F1089 – 10 : Standard Test Method for Corrosion of Surgical Instruments
ASTM F109 – 12 : Standard Terminology Relating to Surface Imperfections on Ceramics
ASTM F1090 – 06 : Standard Classification for Bank and Mercantile Vault Construction
ASTM F1091 – 12 : Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
ASTM F1092 – 04(2010) : Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
ASTM F1093 – 99(2012) : Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
ASTM F1094 – 87(2012) : Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM F1097 – 91(2012) : Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)
ASTM F1098 – 87(2010) : Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
ASTM F1099M – 98(2011) : Standard Specification for Rat Guards, Ship’s (Metric)
ASTM F1104 – 02(2013) : Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
ASTM F1105 – 09 : Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
ASTM F1106 – 87(2012) : Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
ASTM F1107 – 04(2010) : Standard Terminology Relating to Snowboarding
ASTM F1108 – 04(2009) : Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F1110 – 09 : Standard Test Method for Sandwich Corrosion Test
ASTM F1111 – 08b(2013) : Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
ASTM F1112 – 06a(2010) : Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
ASTM F1113 – 87(2011) : Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
ASTM F1114 – 11 : Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray
ASTM F1115 – 95(2008)e1 : Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
ASTM F1116 – 14 : Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
ASTM F1117 – 03(2013) : Standard Specification for Dielectric Footwear
ASTM F112 – 00(2013) : Standard Test Method for Sealability of Enveloped Gaskets
ASTM F1120 – 87(2010) : Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F1121 – 87(2010) : Standard Specification for International Shore Connections for Marine Fire Applications
ASTM F1122 – 04(2010) : Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ASTM F1123 – 87(2010) : Standard Specification for Non-Metallic Expansion Joints
ASTM F1125 – 87(2011) : Standard Terminology of Image Quality in Impact Printing Systems
ASTM F1126 – 12 : Standard Specification for Food Cutters (Electric)
ASTM F1127 – 07(2013) : Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel
ASTM F1129 / F1129M – 12 : Standard Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids
ASTM F1130 – 99(2014) : Standard Practice for Inspecting the Coating System of a Ship
ASTM F1134 – 12 : Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
ASTM F1136 / F1136M – 11 : Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
ASTM F1137 – 11e1 : Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
ASTM F1138 – 98(2014) : Standard Specification for Spray Shields for Mechanical Joints
ASTM F1139 – 88(2010) : Standard Specification for Steam Traps and Drains
ASTM F1140 / F1140M – 13 : Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
ASTM F1141 – 10 : Standard Specification for Wallcovering
ASTM F1142 – 98(2012) : Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
ASTM F1143 – 98(2012) : Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight
ASTM F1144 – 98(2012) : Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged
ASTM F1145 – 05(2011) : Standard Specification for Turnbuckles, Swaged, Welded, Forged
ASTM F1147 – 05(2011) : Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
ASTM F1148 – 12 : Standard Consumer Safety Performance Specification for Home Playground Equipment
ASTM F1149 – 93(2013) : Standard Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services
ASTM F1150 – 11 : Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
ASTM F1151 – 88(2008) : Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
ASTM F1154 – 11 : Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components
ASTM F1155 – 10 : Standard Practice for Selection and Application of Piping System Materials
ASTM F1157 – 04(2010) : Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
ASTM F1158 – 94(2008) : Standard Guide for Inspection and Evaluation of Tampering of Security Seals
ASTM F1159 – 11 : Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures
ASTM F116 – 12 : Standard Specification for Medical Screwdriver Bits
ASTM F1160 – 05(2011)e1 : Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F1162 / F1162M – 12 : Standard Specification for Pole Vault Landing Systems
ASTM F1163 – 13 : Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
ASTM F1164 – 97(2009)e1 : Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
ASTM F1165 – 10 : Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM F1166 – 07(2013) : Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
ASTM F1169 – 13 : Standard Consumer Safety Specification for Full-Size Baby Cribs
ASTM F1172 – 88(2010) : Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ASTM F1173 – 01(2012) : Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM F1174 – 12 : Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM F1175 – 88(2011) : Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
ASTM F1177 – 02(2009) : Standard Terminology Relating to Emergency Medical Services
ASTM F1178 – 11 : Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
ASTM F1179 – 88(2014) : Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs
ASTM F118 – 13 : Standard Definitions of Terms Relating to Gaskets
ASTM F1181 – 09 : Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F1182 – 07(2013) : Standard Specification for Anodes, Sacrificial Zinc Alloy
ASTM F1183 – 96(2011) : Standard Specification for Aluminum Alloy Chain Link Fence Fabric
ASTM F1184 – 05(2010) : Standard Specification for Industrial and Commercial Horizontal Slide Gates
ASTM F1185 – 03(2014) : Standard Specification for Composition of Hydroxylapatite for Surgical Implants
ASTM F1186 – 03(2013) : Standard Classification System for Chemicals According to Functional Groups
ASTM F119 – 82(2008) : Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
ASTM F1190 – 11 : Standard Guide for Neutron Irradiation of Unbiased Electronic Components
ASTM F1192 – 11 : Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices
ASTM F1193 – 06 – Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
ASTM F1194 – 99(2010) : Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
ASTM F1196 – 00(2013) : Standard Specification for Sliding Watertight Door Assemblies
ASTM F1197 – 00(2012) : Standard Specification for Sliding Watertight Door Control Systems
ASTM F1198 – 92(2012)e1 : Standard Guide for Shipboard Fire Detection Systems
ASTM F1199 – 88(2010) : Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
ASTM F1200 – 88(2010) : Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
ASTM F1201 – 88(2010) : Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
ASTM F1202 – 11 : Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
ASTM F1203 – 11 : Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
ASTM F1206 – 94(2011)e1 : Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers
ASTM F1207M – 12 : Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]
ASTM F1208 – 89(2005) : Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems
ASTM F1209 – 14 : Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
ASTM F1210 – 14 : Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
ASTM F1216 – 09 : Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
ASTM F1217 – 11 : Standard Specification for Cooker, Steam
ASTM F1218 – 89(2014) : Standard Specification for Bronchoscopes (Rigid)
ASTM F1220 – 95(2014) : Standard Guide for Emergency Medical Services System (EMSS) Telecommunications
ASTM F1221 – 89(2014) : Standard Guide for Interagency Information Exchange
ASTM F1223 – 14 : Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F1225 – 99(2008) : Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges
ASTM F1229 – 01(2012) : Standard Guide for Qualification and Training of EMS Air Medical Patient Care Providers
ASTM F1231 – 14 : Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
ASTM F1232 – 98(2008) : Standard Practice for Generating a Test Pattern for Single-Pass Film Ribbons
ASTM F1233 – 08(2013) : Standard Test Method for Security Glazing Materials And Systems
ASTM F1235 – 14 : Standard Consumer Safety Specification for Portable Hook-On Chairs
ASTM F1236 – 96(2012) : Standard Guide for Visual Inspection of Electrical Protective Rubber Products
ASTM F1237 – 09 : Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing
ASTM F1238 – 95(2011) : Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications
ASTM F1240 – 01(2009) : Standard Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results
ASTM F1244 – 08(2013) : Standard Specification for Berths, Marine
ASTM F1245 – 89(2012) : Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
ASTM F1246 – 91(2005) : Standard Specification for Electrically Powered Home Care Ventilators, Part 1-Positive-Pressure Ventilators and Ventilator Circuits
ASTM F1247 – 89(2011) : Standard Specification for Intrusion Resistant Generic Vault Structures
ASTM F1249 – 13 : Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM F1250 – 13 : Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper Body Ergometers
ASTM F1252 – 10 : Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
ASTM F1255 – 90(2008) : Standard Practice for Performance of Prehospital Automated Defibrillation
ASTM F1256 – 13 : Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Emergency Medical Technician (EMT) Training Programs
ASTM F1257 – 13 : Standard Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Emergency Medical Technician
ASTM F1258 – 95(2014) : Standard Practice for Emergency Medical Dispatch
ASTM F1262M – 95(2008) : Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)
ASTM F1263 – 11 : Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
ASTM F1264 – 03(2012) : Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM F1265 – 03a(2013) : Standard Test Method for Resistance to Impact for Resilient Floor Tile
ASTM F1266 – 89(2008) : Standard Performance Specification for Cerebral Stereotactic Instruments
ASTM F1267 – 12 : Standard Specification for Metal, Expanded, Steel
ASTM F1268 – 90(2012) : Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
ASTM F1269 – 13 : Standard Test Methods for Destructive Shear Testing of Ball Bonds
ASTM F1270 – 97(2013) : Standard Practice for Preparing and Locating Emergency Muster Lists
ASTM F1271 – 90(2012) : Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM F1273 – 91(2013) : Standard Specification for Tank Vent Flame Arresters
ASTM F1275 – 03(2008) : Standard Test Method for Performance of Griddles
ASTM F1276 – 99(2009) : Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
ASTM F1277 – 02(2009) : Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM F1278 – 96(2008) : Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
ASTM F1279 – 08(2014) : Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
ASTM F1280 – 14 : Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces
ASTM F1281 – 11 : Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM F1282 – 10 : Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1284 – 09 : Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM F1285 – 13 : Standard Guide for Training the Emergency Medical Technician to Perform Patient Examination Techniques
ASTM F1286 – 90(2009) : Standard Guide for Development and Operation of Level 1 Pediatric Trauma Facilities
ASTM F1287 – 90(2012) : Standard Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care
ASTM F1288 – 90(2009) : Standard Guide for Planning for and Response to a Multiple Casualty Incident
ASTM F129 – 97(2008) : Standard Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type
ASTM F1290 – 98a(2011) : Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
ASTM F1291 – 10 : Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM F1292 – 13 : Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
ASTM F1294 – 97a(2009) : Standard Terminology Relating to Automatic Identification Hard Copy Printing Systems
ASTM F1295 – 11 : Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
ASTM F1296 – 08 : Standard Guide for Evaluating Chemical Protective Clothing
ASTM F1297 – 90(2012) : Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment
ASTM F1298 – 90(2012) : Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ASTM F1301 – 90(2011)e1 : Standard Practice for Labeling Chemical Protective Clothing
ASTM F1303 – 04(2014) : Standard Specification for Sheet Vinyl Floor Covering with Backing
ASTM F1304 – 08(2013) : Standard Test Method for Deflection of Resilient Floor Tile
ASTM F1306 – 90(2008)e1 : Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
ASTM F1307 – 14 : Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM F1308 – 98(2014) : Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
ASTM F1309 – 98(2012) : Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
ASTM F1311 – 90(2012) : Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
ASTM F1312 – 90(2013) : Standard Specification for Brick, Insulating, High Temperature, Fire Clay
ASTM F1313 – 90(2011) : Standard Specification for Volatile N-Nitrosamine Levels in Rubber Nipples on Pacifiers
ASTM F1314 – 13ae1 : Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
ASTM F1315 – 00(2014) : Standard Test Method for Density of a Sheet Gasket Material
ASTM F1316 – 90(2013) : Standard Test Method for Measuring the Transmissivity of Transparent Parts
ASTM F1317 – 98(2012) : Standard Test Method for Calibration of Microwave Ovens
ASTM F1318 – 90(2009) : Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM F1319 – 94(2011) : Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
ASTM F1320 – 01(2011) : Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
ASTM F1321 – 14 : Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
ASTM F1322 – 90(2009) : Standard Guide for Selection of Shipboard Incinerators
ASTM F1323 – 08 : Standard Specification for Shipboard Incinerators
ASTM F1325 – 91(2008)e1 : Standard Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
ASTM F1326 – 02(2011) : Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM F1330 – 91(2012) : Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
ASTM F1331 – 91(2012) : Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces
ASTM F1332 – 99(2011) : Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10)
ASTM F1333 – 91(2013) : Standard Specification for Construction of Fire and Foam Station Cabinets
ASTM F1334 – 12 : Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM F1336 – 07 : Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F1337 – 10 : Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities
ASTM F1338 – 91(2013) : Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly
ASTM F1339 – 92(2008) : Standard Guide for Organization and Operation of Emergency Medical Services Systems
ASTM F1342 / F1342M – 05(2013)e1 : Standard Test Method for Protective Clothing Material Resistance to Puncture
ASTM F1344 – 12e1 : Standard Specification for Rubber Floor Tile
ASTM F1345 – 10a : Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
ASTM F1346 – 91(2010) : Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
ASTM F1347 – 91(2012) : Standard Specification for Manually Operated Fueling Hose Reels
ASTM F1348 / F1348M – 91(2013) : Standard Specification for Pneumatic Rotary Descaling Machines
ASTM F1349 – 08(2014) : Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
ASTM F1350 – 08 : Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
ASTM F1351 – 96(2013) : Standard Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems
ASTM F1352 – 08(2013) : Standard Guide for Fixed Blade Broadhead Performance and Safety Standards
ASTM F1355 – 06(2014) : Standard Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment
ASTM F1356 – 08 : Standard Practice for Irradiation of Fresh and Frozen Red Meat and Poultry to Control Pathogens and Other Microorganisms
ASTM F1357 – 09 : Standard Specification for Articulating Total Wrist Implants
ASTM F1358 – 08 : Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
ASTM F1359 / F1359M – 13 : Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin
ASTM F136 – 13 : Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
ASTM F1360 – 06(2012) : Standard Specification for Ovens, Microwave, Electric
ASTM F1361 – 07(2013) : Standard Test Method for Performance of Open Deep Fat Fryers
ASTM F1362 – 13 : Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM F1363 – 07(2011) : Standard Guide for Reduction of Risk of Injury for Archery Overdraws
ASTM F1364 – 03(2010) : Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
ASTM F1365 – 91(2013) : Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
ASTM F1367 – 98(2011) : Standard Specification for Chromium Sputtering Targets for Thin Film Applications
ASTM F137 – 08(2013) : Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
ASTM F1370 – 92(2011) : Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ASTM F1371 – 13 : Standard Specification for Vegetable Peeling Machines, Electric
ASTM F1372 – 93(2012) : Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1373 – 93(2012) : Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F1374 – 92(2012) : Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components
ASTM F1375 – 92(2012) : Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1376 – 92(2012) : Standard Guide for Metallurgical Analysis for Gas Distribution System Components
ASTM F1377 – 13 : Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
ASTM F1378 – 12 : Standard Specification for Shoulder Prostheses
ASTM F1379 – 95(2013) : Standard Terminology Relating to Barbed Tape
ASTM F138 – 13a : Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
ASTM F1383 – 12 : Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
ASTM F1385 – 07(2012) : Standard Practice for Platforms in Cargo Tanks
ASTM F1386 – 92(2010) : Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
ASTM F1387 – 99(2012) : Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM F139 – 12 : Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
ASTM F1394 – 92(2012) : Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM F1396 – 93(2012) : Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
ASTM F1397 – 93(2012) : Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
ASTM F1398 – 93(2012) : Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components
ASTM F14 – 80(2010) : Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
ASTM F140 – 98(2013) : Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
ASTM F1404 – 92(2007) – Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
ASTM F1405 – 08(2013) : Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products—Atlantek Method
ASTM F1407 – 12 : Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method
ASTM F1408 – 97(2013) : Standard Practice for Subcutaneous Screening Test for Implant Materials
ASTM F1409 – 00(2010) : Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets
ASTM F141 – 12 : Standard Terminology Relating to Resilient Floor Coverings
ASTM F1410 – 98(2011) : Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
ASTM F1411 – 11 : Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
ASTM F1412 – 09 : Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
ASTM F1413 – 07(2013) : Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
ASTM F1414 – 13 : Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing
ASTM F1416 – 96(2014) : Standard Guide for Selection of Time-Temperature Indicators
ASTM F1417 – 11a : Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
ASTM F1422 – 08(2014) : Standard Guide for Using the Incident Command System Framework in Managing Search and Rescue Operations
ASTM F1423 – 09 : Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers
ASTM F1424 – 92(2011) : Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono- or Dual-Component Toners
ASTM F1425 – 06(2011) : Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
ASTM F1426 – 11 : Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
ASTM F1427 – 13 : Standard Consumer Safety Specification for Bunk Beds
ASTM F1428 – 92(2011) : Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
ASTM F1429 – 99(2009) : Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
ASTM F1430 / F1430M – 14 : Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
ASTM F1431 – 92(2010) : Standard Specification for Water Trap for Diesel Exhaust
ASTM F1433 – 97(2010) : Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
ASTM F1434 – 97(2013) : Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer
ASTM F1435 – 08(2013) : Standard Specification for Designation of the Balance Point Location for Archery Arrows
ASTM F1436 – 11 : Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
ASTM F1438 – 93(2012) : Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F1439 – 03(2013) : Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials
ASTM F144 – 80(2010) : Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
ASTM F1441 – 03(2009) : Standard Specification for Soft-Tissue Expander Devices
ASTM F1442 – 92(2009) : Standard Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance
ASTM F1443 – 93(2009) : Standard Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images
ASTM F1444 – 00(2009) : Standard Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper-Label Printer Method
ASTM F1445 – 00(2009) : Standard Test Method for Determining Static Thermal Sensitivity of Direct Thermal Paper
ASTM F1446 – 13 : Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
ASTM F1447 – 12 : Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
ASTM F1448 – 12 : Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
ASTM F1449 – 08 : Standard Guide for Industrial Laundering of Flame, Thermal, and Arc Resistant Clothing
ASTM F145 – 72(2009) : Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
ASTM F1450 – 12a : Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
ASTM F1453 – 92(2012) : Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care
ASTM F1454 – 99(2008) : Standard Practice for Comparing Correctable Film Ribbons
ASTM F1455 – 92(2011) : Standard Guide for Selection of Structural Details for Ship Construction
ASTM F1457 – 94b(2011) : Standard Terminology Relating to Laser Printers
ASTM F1458 – 04(2008) : Standard Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices
ASTM F1459 – 06(2012) : Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
ASTM F146 – 12 : Standard Test Methods for Fluid Resistance of Gasket Materials
ASTM F1460 – 07(2013) : Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
ASTM F1461 – 12 : Standard Practice for Chemical Protective Clothing Program
ASTM F1464 – 93(2005) : Standard Specification for Oxygen Concentrators for Domiciliary Use
ASTM F1466 – 99(2010) : Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
ASTM F1467 – 11 : Standard Guide for Use of an X-Ray Tester (˜10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
ASTM F1468 – 04a(2010) : Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
ASTM F1469 – 11 : Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
ASTM F147 – 87(2009) : Standard Test Method for Flexibility of Non-Metallic Gasket Materials
ASTM F1470 – 12 : Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1471 – 09 : Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
ASTM F1472 – 08e1 : Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F1473 – 13 : Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
ASTM F1476 – 07(2013) : Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F1478 – 06(2011) : Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
ASTM F148 – 13 : Standard Test Method for Binder Durability of Cork Composition Gasket Materials
ASTM F1482 – 04(2009)e1 : Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
ASTM F1483 – 12 : Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
ASTM F1484 – 12 : Standard Test Methods for Performance of Steam Cookers
ASTM F1486 – 96(2013) : Standard Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method)
ASTM F1487 – 11 : Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
ASTM F1488 – 09e1 : Standard Specification for Coextruded Composite Pipe
ASTM F149 – 92b(2009) : Standard Terminology Relating to Optical Character Recognition
ASTM F1492 – 08 : Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
ASTM F1493 – 93(2008) : Standard Guide for Financing and Financial Accountability of Medical Transportation Systems
ASTM F1494 – 13 : Standard Terminology Relating to Protective Clothing
ASTM F1495 – 14 : Standard Specification for Combination Oven Electric or Gas Fired
ASTM F1496 – 13 : Standard Test Method for Performance of Convection Ovens
ASTM F1498 – 08(2012)e1 : Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
ASTM F1499 – 12 : Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
ASTM F15 – 04(2013) : Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
ASTM F150 – 06(2013) : Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
ASTM F1500 – 98(2014) : Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM F1502 – 05(2010) : Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
ASTM F1503 – 02(2012) : Standard Practice for Machine/Process Capability Study Procedure
ASTM F1504 – 14 : Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
ASTM F1505 – 10 : Standard Specification for Insulated and Insulating Hand Tools
ASTM F1506 – 10a : Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
ASTM F1507 – 99(2011) : Standard Specification for Surge Suppressors for Shipboard Use
ASTM F1508 – 96(2010) : Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
ASTM F1509 – 94(2009) : Standard Test Methods for Determining Acceptability of Ribbon Welds in Fabric Cartridges
ASTM F1510 – 07(2013) : Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASTM F1511 – 13 : Standard Specification for Mechanical Seals for Shipboard Pump Applications
ASTM F1512 – 94(2011) : Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
ASTM F1513 – 99(2011) : Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
ASTM F1514 – 03(2013) : Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM F1515 – 03(2008) : Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
ASTM F1516 – 13 : Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
ASTM F1517 – 94(2007) : Standard Guide for Scope of Performance of Emergency Medical Services Ambulance Operations
ASTM F1519 – 98(2014) : Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
ASTM F152 – 95(2009) : Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
ASTM F1520 – 94(2008) : Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
ASTM F1521 – 12 : Standard Test Methods for Performance of Range Tops
ASTM F1523 – 94(2013) : Standard Guide for Selection of Booms in Accordance With Water Body Classifications
ASTM F1524 – 95(2013) : Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills
ASTM F1525 / F1525M – 09 : Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills
ASTM F153 – 95(2008) : Standard Test Method for Determining the Yield of Wide Inked Computer Ribbons
ASTM F1533 – 01(2009) : Standard Specification for Deformed Polyethylene (PE) Liner
ASTM F1534 – 10 : Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
ASTM F1536 – 95(2010) : Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
ASTM F1537 – 11 : Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F1538 – 03(2009) : Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
ASTM F1541 – 02(2011)e1 : Standard Specification and Test Methods for External Skeletal Fixation Devices
ASTM F1543 – 96(2007) : Standard Specification for Shock Attenuation Properties of Fencing Surfaces
ASTM F1544 – 11 : Standard Specification for Determining the Rating Velocities of a Compound Archery Bow
ASTM F1545 – 97(2009) : Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F1546 – 96(2012)e1 : Standard Specification for Fire Hose Nozzles
ASTM F1546M – 96(2012)e1 : Standard Specification for Fire Hose Nozzles
ASTM F1547 – 09 : Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding
ASTM F1548 – 01(2012) : Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F1549 – 94(2011) : Standard Terminology Relating to Underwater Search, Rescue, and Recovery Activities
ASTM F1550 – 10 – Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
ASTM F1551 – 09 : Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
ASTM F1552 – 94(2009) : Standard Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers
ASTM F1553 – 11 : Standard Guide for Specifying Chain Link Fence
ASTM F1554 – 07ae1 : Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
ASTM F1555 – 94(2007) : Standard Guide for Characteristics for Extremity Splints
ASTM F1556 – 94(2007) : Standard Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics
ASTM F1557 – 94(2007) : Standard Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics
ASTM F1558 – 94(2007) : Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)
ASTM F1559 – 94(2007) : Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)
ASTM F1560 – 00(2014) : Standard Practice for Emergency Medical Dispatch Management
ASTM F1561 – 03(2008) : Standard Performance Requirements for Plastic Chairs for Outdoor Use
ASTM F1562 – 14 : Standard Guide for Use-Oriented Foreign Language Instruction
ASTM F1563 – 01(2011) : Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
ASTM F1564 – 13 : Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers
ASTM F1565 – 00(2013) : Standard Specification for Pressure-Reducing Valves for Steam Service
ASTM F1566 – 09 : Standard Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
ASTM F1567 – 94(2013) : Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ASTM F1568 – 12 : Standard Specification for Food Processors, Electric
ASTM F1571 – 95(2008) : Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Sutherland Method)
ASTM F1572 – 08 : Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces
ASTM F1574 – 03a(2009) : Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F1575 – 03(2013) : Standard Test Method for Determining Bending Yield Moment of Nails
ASTM F1577 – 05(2012) : Standard Test Methods for Detention Locks for Swinging Doors
ASTM F1578 – 07(2014) : Standard Test Method for Contact Closure Cycling of a Membrane Switch
ASTM F1580 – 12 : Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F1581 – 08(2012) : Standard Specification for Composition of Anorganic Bone for Surgical Implants
ASTM F1582 – 98(2011) : Standard Terminology Relating to Spinal Implants
ASTM F1583 – 95(2012) : Standard Practice for Communications Procedures—Phonetics
ASTM F1586 – 13e1 : Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
ASTM F1587 – 12a : Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders
ASTM F1588 – 96(2011) : Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
ASTM F1591 – 95(2012) : Standard Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies
ASTM F1592 – 12 : Standard Test Methods for Detention Hollow Metal Vision Systems
ASTM F1593 – 08 : Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
ASTM F1594 – 95(2011) : Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
ASTM F1595 – 00(2012) : Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
ASTM F1596 – 07 : Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity
ASTM F1598 – 95(2007) : Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
ASTM F1599 – 95(2009) : Standard Guide for Collecting Performance Data on Temporary Storage Devices
ASTM F16 – 12 : Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
ASTM F1601 – 01(2011) : Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
ASTM F1602 – 12 : Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
ASTM F1603 – 12 : Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
ASTM F1604 – 09 : Standard Specification for Freezers, Ice Cream, Soft Serve, Shake
ASTM F1605 – 95(2007) : Standard Test Method for Performance of Double-Sided Griddles
ASTM F1606 – 05 : Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
ASTM F1607 – 95(2013) : Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
ASTM F1608 – 00(2009) : Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
ASTM F1609 – 08(2014) : Standard Specification for Calcium Phosphate Coatings for Implantable Materials
ASTM F1611 – 00(2013) : Standard Specification for Intramedullary Reamers
ASTM F1613 – 95(2008)e1 : Standard Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)
ASTM F1615 – 95(2009) : Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
ASTM F1616 – 95(2009) : Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
ASTM F1623 – 96(2013) : Standard Terminology Relating to Thermal Imaging Products
ASTM F1624 – 12 : Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM F1625 – 00(2012) : Standard Specification and Test Method for Rear-Mounted Bicycle Child Carriers
ASTM F1629 – 95(2007) : Standard Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both
ASTM F1632 – 03(2010) : Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM F1633 – 97(2008) : Standard Guide for Techniques in Land Search
ASTM F1634 – 95(2008) : Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices
ASTM F1635 – 11 : Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
ASTM F1637 – 13 : Standard Practice for Safe Walking Surfaces
ASTM F1638 – 95(2008)e1 : Standard Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)
ASTM F1640 – 09 : Standard Guide for Packaging Materials for Foods to Be Irradiated
ASTM F1642 – 12 : Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM F1643 – 05(2012) : Standard Test Methods for Detention Sliding Door Locking Device Assembly
ASTM F1645 / F1645M – 12 : Standard Test Method for Water Migration in Honeycomb Core Materials
ASTM F1646 – 13 : Standard Terminology Relating to Safety and Traction for Footwear
ASTM F1647 – 11 : Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes
ASTM F1648 – 95(2013) : Standard Test Methods for Archery Bowstring Component—Serving String Material
ASTM F1649 – 13 : Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
ASTM F1650 – 98(2014)e1 : Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
ASTM F1651 – 95(2009) : Standard Guide for Training the Emergency Medical Technician (Paramedic)
ASTM F1652 – 95(2007) : Standard Guide for Providing Essential Data Needed in Advance for Prehospital Emergency Medical Services
ASTM F1653 – 95(2012) : Standard Guide for Scope of Performance of Triage in a Prehospital Environment
ASTM F1654 – 95(2012) : Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment
ASTM F1655 – 95(2013) : Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings
ASTM F1657 / F1657M – 96(2012)e1 : Standard Practice for Emergency Joining of Booms with Incompatible Connectors
ASTM F1661 – 09 : Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM F1662 – 10 : Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM F1663 – 09 : Standard Test Method for Determining the Capacitance of a Membrane Switch
ASTM F1664 – 08(2013) : Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM F1665 – 08(2013) : Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ASTM F1667 – 13 : Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM F1668 – 08 : Standard Guide for Construction Procedures for Buried Plastic Pipe
ASTM F1669M – 12 : Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]
ASTM F1670 / F1670M – 08(2014)e1 : Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
ASTM F1671 / F1671M – 13 : Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
ASTM F1672 – 14 : Standard Specification for Resurfacing Patellar Prosthesis
ASTM F1673 – 10 : Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
ASTM F1674 – 11 : Standard Test Method for Joint Restraint Products for Use with PVC Pipe
ASTM F1675 – 13 : Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
ASTM F1680 – 07a : Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM F1681 – 14 : Standard Test Method for Determining Current Carrying Capacity of a Membrane Switch Circuit
ASTM F1683 – 09 : Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
ASTM F1684 – 06(2011) : Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM F1685 – 00(2013) : Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
ASTM F1686 – 09e1 : Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines
ASTM F1687 – 09 : Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines
ASTM F1689 – 05(2012) : Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
ASTM F1692 – 01(2011) : Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
ASTM F1693 – 13 : Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
ASTM F1694 – 09 : Standard Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
ASTM F1695 – 03(2008) : Standard Test Method for Performance of Underfired Broilers
ASTM F1696 – 07 : Standard Test Method for Energy Performance of Single-Rack, Door-Type Commercial Dishwashing Machines
ASTM F1697 – 09 : Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
ASTM F1698 – 02(2008) : Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
ASTM F1699 – 96(2008) : Standard Classification for Passive Fiber Optic Seals
ASTM F17 – 13a : Standard Terminology Relating to Flexible Barrier Packaging
ASTM F1700 – 13a : Standard Specification for Solid Vinyl Floor Tile
ASTM F1701 – 12 : Standard Specification for Unused Rope with Special Electrical Properties
ASTM F1702 – 10 : Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM F1703 – 13 : Standard Guide for Skating and Ice Hockey Playing Facilities
ASTM F1704 – 12 : Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
ASTM F1705 – 96(2012) : Standard Guide for Training Emergency Medical Services Ambulance Operations
ASTM F1709 – 97(2008) : Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications
ASTM F1710 – 08 : Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1711 – 96(2008) : Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
ASTM F1712 – 11 : Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications
ASTM F1713 – 08(2013) : Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
ASTM F1714 – 96(2013) : Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
ASTM F1716 – 96(2008) : Standard Guide for Transition and Performance of Marine Software Systems Maintenance
ASTM F1717 – 14 : Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM F1718 – 01(2013) : Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F1719 – 96(2008) : Standard Specification for Image-Interactive Stereotactic and Localization Systems
ASTM F1720 – 06(2011) : Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
ASTM F1721 – 04(2009) : Standard Practices for Determining Stability of Direct Thermal Imaging Products
ASTM F1722 – 09 : Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
ASTM F1728 – 96(2014) : Standard Practice for Multiple Persons Cold Water Survival/Rescue Technique: Huddle Position
ASTM F1729 – 96(2014) : Standard Practice for Single Person Cold Water Survival/Rescue Technique: HELP Position
ASTM F1730 – 96(2014) : Standard Guide for Throwing a Water Rescue Throwbag
ASTM F1731 – 96(2013) : Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
ASTM F1732 – 12 : Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
ASTM F1733 – 13 : Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
ASTM F1734 – 03(2009) : Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
ASTM F1735 – 09 : Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
ASTM F1736 – 09 : Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms
ASTM F1737 / F1737M – 10 : Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems
ASTM F1738 – 10 : Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
ASTM F1739 – 96(2012) : Standard Guide for Performance of a Water Rescuer—Level I
ASTM F1740 – 96(2012) : Standard Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope
ASTM F1741 – 08 : Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
ASTM F1742 – 03(2011) : Standard Specification for PVC Insulating Sheeting
ASTM F1743 – 08 : Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
ASTM F1744 – 96(2008)e1 : Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
ASTM F1749 – 09 : Standard Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels
ASTM F1750 – 11 : Specification for Paintball Marker Threaded-Propellant Source Interface
ASTM F1752 – 96(2010) : Standard Test Method for Archery Bow Component-Cord Material
ASTM F1753 – 96(2010) : Standard Specification for Classification and Marking of Single-Lens Scopes for Use with Archery Bows
ASTM F1755M – 96(2012)e1 : Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
ASTM F1756 – 97a(2008) : Standard Guide for Implementation of a Fleet Management System Network
ASTM F1757 – 96(2008) : Standard Guide for Digital Communication Protocols for Computerized Systems
ASTM F1758 – 05(2012) : Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
ASTM F1759 – 97(2010) : Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F1760 – 01(2011) : Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
ASTM F1761 – 00(2011) : Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets
ASTM F1762 – 14 : Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch
ASTM F1764 – 97(2012) : Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
ASTM F1765 – 97a(2014) : Standard Guide for Ice Staff Self-Rescue Technique
ASTM F1766 – 97a(2014) : Standard Guide for Ice Awls Self-Rescue Technique
ASTM F1768 – 97(2014) : Standard Guide for Using Whistle Signals During Rope Rescue Operations
ASTM F1772 – 12 : Standard Specification for Harnesses for Rescue, Safety, and Sport Activities
ASTM F1773 – 09 : Standard Terminology Relating to Climbing, Mountaineering, Search and Rescue Equipment and Practices
ASTM F1774 – 13 : Standard Specification for Climbing and Mountaineering Carabiners
ASTM F1776 – 12 : Standard Specification for Eye Protective Devices for Paintball Sports
ASTM F1777 – 12 : Standard Practice for Paintball Field Operation
ASTM F1778 – 97(2008) : Standard Guide for Selection of Skimmers for Oil-Spill Response
ASTM F1779 – 08(2014) : Standard Practice for Reporting Visual Observations of Oil on Water
ASTM F1780 – 97(2010) : Standard Guide for Estimating Oil Spill Recovery System Effectiveness
ASTM F1781 – 03(2009) : Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants
ASTM F1782 – 97(2008) : Standard Practice for Amount of Ink Deposit on Fabric Type Ribbons
ASTM F1783 – 97(2013) : Standard Guide for Performance of an Ice Rescuer—Level II
ASTM F1784 – 97(2008) : Standard Test Method for Performance of a Pasta Cooker
ASTM F1785 – 97(2008) : Standard Test Method for Performance of Steam Kettles
ASTM F1786 – 97(2010) : Standard Test Method for Performance of Braising Pans
ASTM F1787 – 98(2008) : Standard Test Method for Performance of Rotisserie Ovens
ASTM F1788 – 14 : Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM F1789 – 14 : Standard Terminology for F16 Mechanical Fasteners
ASTM F1790 / F1790M – 14 : Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing
ASTM F1791 – 00(2013) : Standard Specification for Filters Used in Air or Nitrogen Systems
ASTM F1792 – 97(2010) : Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ASTM F1793 – 97(2010) : Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
ASTM F1794 – 97(2010) : Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
ASTM F1795 – 00(2013) : Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
ASTM F1796 – 09 : Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC
ASTM F1797 – 14 : Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks
ASTM F1798 – 13 : Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
ASTM F1799 – 97(2009) : Standard Guide for Shipboard Generated Waste Management Audits
ASTM F18 – 12 : Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
ASTM F180 – 94(2010)e1 : Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
ASTM F1800 – 12 : Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F1801 – 97(2009)e1 : Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM F1802 – 04(2010) : Standard Test Method for Performance Testing of Excess Flow Valves
ASTM F1803 – 06 : Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM F1804 – 08(2012) : Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
ASTM F1805 – 12 : Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
ASTM F1806 – 97(2008) : Standard Practice for Tire Testing Operations-Basic Concepts and Terminology for Reference Tire Use
ASTM F1807 – 13a : Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
ASTM F1808 – 03(2013) : Standard Guide for Weight Control Technical Requirements for Surface Ships
ASTM F1812 – 09 : Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding
ASTM F1813 – 13 : Standard Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant (UNS R58120)
ASTM F1814 – 97a(2009) : Standard Guide for Evaluating Modular Hip and Knee Joint Components
ASTM F1815 – 11 : Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
ASTM F1816 – 97(2009) : Standard Safety Specification for Drawstrings on Children’s Upper Outerwear
ASTM F1817 – 09 : Standard Test Method for Performance of Conveyor Ovens
ASTM F1818 – 13 : Standard Specification for Foot Protection for Chain Saw Users
ASTM F1819 – 07(2013) : Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
ASTM F1820 – 13 : Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices
ASTM F1821 – 13 : Standard Consumer Safety Specification for Toddler Beds
ASTM F1823 – 97(2012) : Standard Guide for Water Rescue Personal Flotation Device (PFD)
ASTM F1824 – 97(2013) : Standard Guide for Performance of a Water Rescuer–Level II
ASTM F1825 – 03(2013) : Standard Specification for Clampstick Type Live Line Tools
ASTM F1826 – 00(2011) : Standard Specification for Live Line and Measuring Telescoping Tools
ASTM F1827 – 13 : Standard Terminology Relating to Food Service Equipment
ASTM F1828 – 97(2006) : Standard Specification for Ureteral Stents
ASTM F1829 – 98(2009) : Standard Test Method for Static Evaluation of the Glenoid Locking Mechanism in Shear
ASTM F1830 – 97(2013) : Standard Practice for Selection of Blood for in vitro Evaluation of Blood Pumps
ASTM F1831 – 97(2006) : Standard Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices
ASTM F1832 – 07(2011) : Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1833 – 97(2011) : Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
ASTM F1835 – 97(2012)e1 : Standard Guide for Cable Splicing Installations
ASTM F1836M – 09(2013) : Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
ASTM F1837M – 97(2012)e1 : Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
ASTM F1838 – 98(2008) : Standard Performance Requirements for Child’s Plastic Chairs for Outdoor Use
ASTM F1839 – 08(2012) : Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM F1840 – 10e1 : Standard Terminology for Surgical Suture Needles
ASTM F1841 – 97(2013) : Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps
ASTM F1842 – 09 : Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications
ASTM F1843 – 09 : Standard Practice for Sample Preparation of Transparent Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
ASTM F1844 – 97(2008) : Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
ASTM F1845 – 08 : Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1846 – 98(2014) : Standard Practice for Symbols and Markings for Use With Land Search Maps
ASTM F1847 – 14 : Standard Guide for Minimum Training of Search Dog Crews or Teams
ASTM F1848 – 14 : Standard Classification System for Canine Search Resources
ASTM F1849 – 07(2012) : Standard Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)
ASTM F1850 – 00(2005) : Standard Specification for Particular Requirements for Anesthesia Workstations and Their Components
ASTM F1851 – 98(2009) : Standard Practice for Bar Code Verification
ASTM F1852 – 11 : Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
ASTM F1853 – 11 : Standard Test Method for Measuring Sleeping Bag Packing Volume
ASTM F1854 – 09 : Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
ASTM F1855 – 00(2011) : Standard Specification for Polyoxymethylene (Acetal) for Medical Applications
ASTM F1856 – 04(2009) : Standard Practice for Determining Toner Usage for Printer Cartridges
ASTM F1857 – 01(2011) : Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom
ASTM F1858 – 98(2008) : Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
ASTM F1859 – 12 : Standard Specification for Rubber Sheet Floor Covering Without Backing
ASTM F1860 – 12 : Standard Specification for Rubber Sheet Floor Covering With Backing
ASTM F1861 – 08(2012)e1 : Standard Specification for Resilient Wall Base
ASTM F1862 / F1862M – 13 : Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
ASTM F1863 – 10 : Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts
ASTM F1864 – 05(2010) : Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
ASTM F1865 – 09 : Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
ASTM F1866 – 13 : Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
ASTM F1867 – 06(2012) : Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
ASTM F1868 – 14 : Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
ASTM F1869 – 11 : Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
ASTM F1870 – 11 : Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ASTM F1871 – 11 : Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
ASTM F1872 – 12 : Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations
ASTM F1874 – 98(2011) : Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM F1875 – 98(2009) : Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface
ASTM F1877 – 05(2010) : Standard Practice for Characterization of Particles
ASTM F1878 – 98(2009) : Standard Guide for Escort Vessel Evaluation and Selection
ASTM F1880 – 09(2013) : Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
ASTM F1882 – 06 : Standard Specification for Residential Basketball Systems
ASTM F1883 – 03(2013) : Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
ASTM F1884 – 04(2011) : Standard Test Method for Determining Residual Solvents in Packaging Materials
ASTM F1885 – 04(2010) : Standard Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
ASTM F1886 / F1886M – 09(2013) : Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
ASTM F1887 – 14 : Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM F1888 – 09(2014) : Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM F1889 – 05(2010) : Standard Guide for Straightness Measurement of Arrow Shafts
ASTM F1890 – 11 : Standard Test Method for Measuring Softball Bat Performance Factor
ASTM F1891 – 12 : Standard Specification for Arc and Flame Resistant Rainwear
ASTM F1892 – 12 : Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
ASTM F1893 – 11 – Guide for Measurement of Ionizing Dose-Rate Survivability and Burnout of Semiconductor Devices
ASTM F1894 – 98(2011) – Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
ASTM F1895 – 14 : Standard Test Method for Submersion of a Membrane Switch
ASTM F1896 – 10 – Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM F1897 – 14 : Standard Specification for Leg Protection for Chain Saw Users
ASTM F1898 – 08 : Standard Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers
ASTM F1899 – 98(2008)e1 : Standard Specification for Food Waste Pulper Without Waterpress Assembly
ASTM F19 – 11 : Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
ASTM F1900 – 98(2012) : Standard Test Method for Water Resistance of Footwear Using a Walking Step Simulator
ASTM F1901 – 10 : Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
ASTM F1903 – 10 : Standard Practice for Testing For Biological Responses to Particles In Vitro
ASTM F1904 – 14 : Standard Practice for Testing the Biological Responses to Particles in vivo
ASTM F1908 – 08(2013) : Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
ASTM F1909 – 98(2012) : Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
ASTM F1910 – 98(2013) : Standard Specification for Long Barbed Tape Obstacles
ASTM F1911 – 05(2010) : Standard Practice for Installation of Barbed Tape
ASTM F1912 – 98(2009) : Standard Specification for Safety of Bean Bag Chairs
ASTM F1913 – 04(2010) : Standard Specification for Vinyl Sheet Floor Covering Without Backing
ASTM F1914 – 07(2011) : Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM F1915 – 05(2012) : Standard Test Methods for Glazing for Detention Facilities
ASTM F1917 – 12 : Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
ASTM F1918 – 12 : Standard Safety Performance Specification for Soft Contained Play Equipment
ASTM F1919 – 10 : Standard Specification for Griddles, Single and Double Sided, Self-heating, Counter or Stand Mounted Gas and Electric Fired
ASTM F1920 – 11 : Standard Test Method for Performance of Rack Conveyor, Commercial Dishwashing Machines
ASTM F1921 / F1921M – 12e1 : Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
ASTM F1922 – 98(2014) : Standard Test Method for Tires, Pneumatic, Vehicular, Highway
ASTM F1923 – 98(2014) : Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway
ASTM F1924 – 12 : Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
ASTM F1925 – 09 : Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
ASTM F1926 / F1926M – 10 : Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings
ASTM F1927 – 14 : Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM F1928 – 98(2010) : Standard Safety Guide for Consumer Recreational Use of Fun-Karts
ASTM F1929 – 12 : Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
ASTM F1930 – 13 : Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM F1932 / F1932M – 98(2011)e1 : Standard Test Method for Measuring Sleeping Bag Loft
ASTM F1933 – 98(2011) : Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
ASTM F1934 – 98(2011) : Standard Test Method for Weighing a Backpacking or Mountaineering Tent
ASTM F1935 – 01(2011) : Standard Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent
ASTM F1936 – 10 : Standard Specification for Impact Attenuation of Turf Playing Systems as Measured in the Field
ASTM F1937 – 04(2010) : Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding
ASTM F1938 – 98(2009) – Guide for Safer Use of Movable Soccer Goals
ASTM F1939 – 08 : Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
ASTM F1940 – 07a : Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM F1941 – 10 : Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
ASTM F1941M – 07 : Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]
ASTM F1942 – 98(2010) : Standard Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers
ASTM F1943 – 98(2008) : Standard Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products—Atlantek Method
ASTM F1944 – 98(2008) : Standard Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers
ASTM F1945 – 05(2011) : Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
ASTM F1946 / F1946M – 10 : Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight
ASTM F1947 – 10 : Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
ASTM F1948 – 12 : Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
ASTM F1949 – 99(2013) : Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles
ASTM F1951 – 09b : Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
ASTM F1952 – 10 : Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing
ASTM F1953 – 10 : Standard Guide for Construction and Maintenance of Grass Tennis Courts
ASTM F1956 – 13 : Standard Specification for Rescue Carabiners
ASTM F1957 – 99(2011) : Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM F1958 / F1958M – 12 : Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins
ASTM F1959 / F1959M – 14 : Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM F1960 – 12 : Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
ASTM F1961 – 09 : Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
ASTM F1962 – 11 : Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
ASTM F1963 – 05(2011) : Standard Specification for Deep-Fat Fryers, Gas or Electric, Open
ASTM F1964 – 11 : Standard Test Method for Performance of Pressure Fryers
ASTM F1965 – 99(2010) : Standard Test Method for Performance of Deck Ovens
ASTM F1966 – 12 : Standard Specification for Dough Divider and Rounding Machines
ASTM F1967 – 13 : Standard Consumer Safety Specification for Infant Bath Seats
ASTM F1970 – 12e1 : Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
ASTM F1971 – 12 : Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
ASTM F1972 – 13 : Standard Guide for Terminology Relating to Candles and Associated Accessory Items
ASTM F1973 – 13e1 : Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
ASTM F1974 – 09 : Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
ASTM F1975 – 09 : Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers
ASTM F1976 – 13 : Standard Test Method for Impact Attenuation of Athletic Shoe Cushioning Systems and Materials
ASTM F1977 – 04(2010) : Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1978 – 12 : Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM F1979 – 10 : Standard Specification for Paintballs Used in the Sport of Paintball
ASTM F1980 – 07(2011) : Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
ASTM F1983 – 99(2008) : Standard Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications
ASTM F1984 – 99(2013) : Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials
ASTM F1985 – 99(2011) : Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
ASTM F1986 – 01(2011) : Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
ASTM F1987 – 01(2011) : Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
ASTM F1988 – 99(2008) : Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use
ASTM F1989 – 05(2013) : Standard Specification for Cooking Fire Suppression Blankets
ASTM F1990 – 07(2013) : Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices
ASTM F1991 – 99(2010) : Standard Test Method for Performance of Chinese (Wok) Ranges
ASTM F1992 – 99(2007) : Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
ASTM F1994 – 99(2011) : Standard Test Method for Shipboard Fixed Foam Firefighting Systems
ASTM F1995 – 13 : Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch
ASTM F1996 – 06 : Standard Test Method for Silver Migration for Membrane Switch Circuitry
ASTM F1999 – 00(2006) : Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
ASTM F2000 – 10 : Standard Guide for Fences for Baseball and Softball Fields
ASTM F2001 – 01(2006) : Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record
ASTM F2003 – 02(2008) : Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
ASTM F2004 – 05(2010) : Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
ASTM F2005 – 05(2010) : Standard Terminology for Nickel-Titanium Shape Memory Alloys
ASTM F2006 – 10 : Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
ASTM F2007 – 12 : Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
ASTM F2008 – 00(2012)e1 : Standard Guide for Qualitative Observations of Skimmer Performance
ASTM F2009 – 00(2011) : Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
ASTM F2010 / F2010M – 10 : Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test
ASTM F2011 – 02(2010) : Standard Specification for Safety and Performance of Fun-Karts
ASTM F2012 – 13 : Standard Consumer Safety Performance Specification for Stationary Activity Centers
ASTM F2013 – 10 : Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
ASTM F2014 – 00(2013) : Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ASTM F2015 – 00(2013) : Standard Specification for Lap Joint Flange Pipe End Applications
ASTM F2016 – 00(2012) : Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
ASTM F2017 – 00(2006) : Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration
ASTM F2018 – 00(2010) : Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2019 – 11 : Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
ASTM F2020 – 02a(2009) : Standard Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances
ASTM F2021 – 11 : Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
ASTM F2022 – 01(2013) : Standard Test Method for Performance of Booster Heaters
ASTM F2023 – 13 : Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
ASTM F2024 – 10 : Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
ASTM F2025 – 06(2012) : Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
ASTM F2026 – 14 : Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2027 – 08 : Standard Guide for Characterization and Testing of Raw or Starting Biomaterials for Tissue-Engineered Medical Products
ASTM F2028 – 08(2012)e1 : Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
ASTM F2029 – 08 : Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
ASTM F2030 – 11 : Standard Specification for Paintball Cylinder Burst Disk Assemblies
ASTM F2031 – 05(2010) : Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2032 – 06(2011) : Standard Specification for Helmets Used for BMX Cycling
ASTM F2033 – 12 : Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
ASTM F2034 – 08(2013) : Standard Specification for Sheet Linoleum Floor Covering
ASTM F2035 – 00(2011) : Standard Practice for Measuring the Dark Stability of Ink Jet Prints
ASTM F2036 – 05(2011) : Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM F2037 – 00(2011) : Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments
ASTM F2038 – 00(2011) : Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials
ASTM F2039 – 00(2012) : Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
ASTM F204 – 76(2013) : Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire
ASTM F2040 – 11 : Standard Specification for Helmets Used for Recreational Snow Sports
ASTM F2042 – 00(2011) : Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication
ASTM F2043 – 13 : Standard Classification for Bicycle Usage
ASTM F2044 – 09(2013) : Standard Specification for Liquid Level Indicating Equipment, Electrical
ASTM F2045 – 00(2011) : Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
ASTM F2046 – 00(2011) : Standard Specification for Tachometers, Various
ASTM F2047 – 00(2012) : Standard Practice for Workers’ Compensation Coverage of Emergency Services Volunteers
ASTM F2048 – 00(2009) : Standard Practice for Reporting Slip Resistance Test Results
ASTM F2049 – 11 : Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
ASTM F205 – 94(2010)e1 : Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM F2050 – 13a : Standard Consumer Safety Specification for Hand-Held Infant Carriers
ASTM F2051 – 00(2006) : Standard Specification for Implantable Saline Filled Breast Prosthesis
ASTM F2052 – 06e1 : Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
ASTM F2053 – 00(2011) : Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
ASTM F2054 / F2054M – 13 : Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
ASTM F2055 – 10 : Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
ASTM F2056 – 09 : Standard Safety and Performance Specification for Soccer Goals
ASTM F2057 – 09b : Standard Safety Specification for Chests, Door Chests, and Dressers
ASTM F2058 – 07 : Standard Specification for Candle Fire Safety Labeling
ASTM F2059 – 06(2012)e1 : Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask
ASTM F2060 – 00(2011) : Standard Guide for Maintaining Cool Season Turfgrasses on Athletic Fields
ASTM F2061 – 12 : Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions
ASTM F2062 – 00(2011) : Standard Specification for Square Drive Interconnections on Surgical Instruments
ASTM F2063 – 12 : Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
ASTM F2064 – 00(2006)e1 : Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Products Application
ASTM F2065 – 00(2010) : Standard Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials
ASTM F2066 – 13e1 : Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
ASTM F2067 – 13 : Standard Practice for Development and Use of Oil-Spill Trajectory Models
ASTM F2068 – 09 : Standard Specification for Femoral Prostheses—Metallic Implants
ASTM F2070 – 00(2011) : Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
ASTM F2071 – 00(2011) : Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
ASTM F2072 – 14 : Standard Test Method for Hosedown of a Membrane Switch
ASTM F2073 – 01(2006) : Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
ASTM F2075 – 10a : Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
ASTM F2076 – 01(2014) : Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities
ASTM F2077 – 11 – Test Methods For Intervertebral Body Fusion Devices
ASTM F2078 – 08a : Standard Terminology Relating to Hydrogen Embrittlement Testing
ASTM F2079 – 09(2013) : Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
ASTM F2080 – 12 : Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
ASTM F2081 – 06(2013) : Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents
ASTM F2082 – 06 : Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM F2083 – 12 : Standard Specification for Knee Replacement Prosthesis
ASTM F2084 / F2084M – 01(2012)e1 : Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
ASTM F2085 – 12 : Standard Consumer Safety Specification for Portable Bed Rails
ASTM F2087 – 13 : Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick
ASTM F2088 – 13 : Standard Consumer Safety Specification for Infant Swings
ASTM F2089 – 01(2007) : Standard Guide for Language Interpretation Services
ASTM F2090 – 10 : Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
ASTM F2091 – 01(2012) : Standard Specification for Acetabular Prostheses
ASTM F2092 – 01(2007) : Standard Specification for Convection Oven Gas or Electric
ASTM F2093 – 11 : Standard Test Method for Performance of Rack Ovens
ASTM F2094 / F2094M – 14 : Standard Specification for Silicon Nitride Bearing Balls
ASTM F2095 – 07(2013) : Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
ASTM F2096 – 11 : Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
ASTM F2097 – 14 : Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
ASTM F2098 – 08 : Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
ASTM F2099 – 01(2014) : Standard Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search
ASTM F21 – 65(2007) : Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
ASTM F2100 – 11 : Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2101 – 07 : Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus
ASTM F2102 – 13 : Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F2103 – 11 : Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications
ASTM F2105 – 11 : Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ASTM F2106 – 12 : Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
ASTM F2107 – 08 : Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
ASTM F2108 – 06(2011) : Standard Practice for Inspection of Transparent Parts by Prism
ASTM F2109 – 01(2011) : Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
ASTM F2111 – 01a(2011) : Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
ASTM F2112 – 02(2011) : Standard Terminology for Membrane Switches
ASTM F2113 – 01(2011) : Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
ASTM F2115 – 12 : Standard Specification for Motorized Treadmills
ASTM F2116 – 01(2007) : Standard Specification for Low Stretch and Static Kernmantle Life Safety Rope
ASTM F2117 – 10 : Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
ASTM F2118 – 10 – Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
ASTM F2119 – 07(2013) : Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants
ASTM F2120 – 06(2010) : Standard Practice for Testing Treestand Load Capacity
ASTM F2121 – 13 : Standard Practice for Treestand Labels
ASTM F2122 – 13 : Standard Practice for Treestand Safety Devices
ASTM F2123 – 13 : Standard Practice for Treestand Instructions
ASTM F2124 – 13 : Standard Practice for Testing Treestand Ladder, Tripod Stand and Climbing Stick Load Capacity
ASTM F2125 – 09(2013) : Standard Test Method for Treestand Static Stability and Adherence
ASTM F2126 – 06(2010) : Standard Test Method for Treestand Static Load Capacity
ASTM F2128 – 13 : Standard Test Method for Treestand Repetitive Loading Capability
ASTM F2129 – 08 : Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM F2130 – 11 : Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
ASTM F2131 – 02(2012) : Standard Test Method for In Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line
ASTM F2132 – 01(2008)e1 : Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
ASTM F2135 – 01(2012) : Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
ASTM F2136 – 08 : Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM F2137 – 13 : Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
ASTM F2138 – 12 : Standard Specification for Excess Flow Valves for Natural Gas Service
ASTM F2140 – 11 : Standard Test Method for Performance of Hot Food Holding Cabinets
ASTM F2141 – 07(2013) : Standard Test Method for Performance of Self-Serve Hot Deli Cases
ASTM F2142 – 01(2013) : Standard Test Method for Performance of Drawer Warmers
ASTM F2143 – 04(2010) : Standard Test Method for Performance of Refrigerated Buffet and Preparation Tables
ASTM F2144 – 09 : Standard Test Method for Performance of Large Open Vat Fryers
ASTM F2145 – 13 : Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
ASTM F2146 – 13 : Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
ASTM F2147 – 01(2010) : Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens
ASTM F2148 – 13 : Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)
ASTM F2149 – 01(2007) : Standard Test Method for Automated Analyses of Cells-the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions
ASTM F2150 – 13 : Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
ASTM F2152 – 07(2013) : Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
ASTM F2153 – 07(2012) : Standard Test Method for Measurement of Backpack Capacity
ASTM F2154 – 13 : Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced
ASTM F2155 – 01(2009) : Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
ASTM F2156 – 11 : Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
ASTM F2157 – 09 : Standard Specification for Synthetic Surfaced Running Tracks
ASTM F2158 – 08(2013) : Standard Specification for Residential Central-Vacuum Tube and Fittings
ASTM F2159 – 11 : Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
ASTM F2160 – 10 : Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F2161 – 10 : Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils
ASTM F2162 – 01(2008) : Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
ASTM F2163 – 01(2008) : Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
ASTM F2164 – 13 : Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
ASTM F2165 – 13 : Standard Specification for Flexible Pre-Insulated Piping
ASTM F2167 – 14 : Standard Consumer Safety Specification for Infant Bouncer Seats
ASTM F2168 – 13 : Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
ASTM F2169 – 12 : Standard Specification for Resilient Stair Treads
ASTM F2170 – 11 : Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM F2171 – 02(2009) : Standard Guide for Defining the Performance of First Aid Providers in Occupational Settings
ASTM F2172 – 02(2011) : Standard Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers
ASTM F2174 – 02(2008) : Standard Practice for Verifying Acoustic Emission Sensor Response
ASTM F2175 – 07 : Standard Specification for Portable and Permanent Emergency Escape Ladders for Residential Use
ASTM F2176 – 02(2009) : Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
ASTM F2178 – 12 : Standard Test Method for Determining the Arc Rating and Standard Specification for Eye or Face Protective Products
ASTM F2179 – 14 : Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
ASTM F218 – 13 : Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM F2180 – 02(2011)e1 : Standard Specification for Metallic Implantable Strands and Cables
ASTM F2181 – 09 : Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
ASTM F2182 – 11a : Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
ASTM F2183 – 02(2008) : Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
ASTM F2184 – 10 : Standard Guide for Installation of Paintball Barrier Netting
ASTM F2187 – 02(2011) : Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
ASTM F2188 – 02(2011) : Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
ASTM F219 – 96(2013) : Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
ASTM F2191 / F2191M – 13 : Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
ASTM F2192 – 05(2011) : Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
ASTM F2193 – 02(2007) : Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM F2194 – 13a : Standard Consumer Safety Specification for Bassinets and Cradles
ASTM F2195 – 13 : Standard Specification for Linoleum Floor Tile
ASTM F2199 – 09(2014) : Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat
ASTM F22 – 13 : Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM F2200 – 13e1 : Standard Specification for Automated Vehicular Gate Construction
ASTM F2201 – 10 : Standard Consumer Safety Specification for Utility Lighters
ASTM F2202 – 02(2007) : Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
ASTM F2203 – 13 : Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM F2204 – 09 : Standard Guide for Describing Shoreline Response Techniques
ASTM F2205 – 07(2013) : Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments
ASTM F2206 – 11 : Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
ASTM F2207 – 06(2013) : Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
ASTM F2208 – 08(2014) : Standard Safety Specification for Residential Pool Alarms
ASTM F2209 – 10 : Standard Guide for Training of Level I Land Search Team Member
ASTM F221 – 98(2009) : Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom
ASTM F2210 – 02(2010) : Standard Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered Medical Products
ASTM F2211 – 13 : Standard Classification for Tissue Engineered Medical Products (TEMPs)
ASTM F2212 – 11 : Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
ASTM F2213 – 06(2011) : Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
ASTM F2214 – 02(2008) : Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
ASTM F2215 – 08 : Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
ASTM F2216 – 12 : Standard Specification for Selectorized Strength Equipment
ASTM F2217 / F2217M – 13 : Standard Practice for Coating/Adhesive Weight Determination
ASTM F2218 – 02(2008) : Standard Guide for Hardware Implementation for Computerized Systems
ASTM F2219 – 14 : Standard Test Methods for Measuring High-Speed Bat Performance
ASTM F2220 – 12 : Standard Specification for Headforms
ASTM F2223 – 10 : Standard Guide for ASTM Standards on Playground Surfacing
ASTM F2224 – 09(2014) : Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants
ASTM F2225 – 13 : Standard Safety Specification for Consumer Trampoline Enclosures
ASTM F2226 – 03(2009)e1 : Standard Practice for Determining the Adhesion of Prints and Laminating Films
ASTM F2227 – 13 : Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method
ASTM F2228 – 13 : Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
ASTM F2229 – 12 : Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
ASTM F2230 – 08 : Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
ASTM F2231 – 02(2013) : Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM F2232 – 09 : Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
ASTM F2233 – 03(2009) : Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
ASTM F2234 – 08 : Standard Specification for Spill Resistant Fueling Systems for Portable Fuel Containers for Consumer Use
ASTM F2236 – 14 : Standard Consumer Safety Specification for Soft Infant and Toddler Carriers
ASTM F2237 – 03(2008) : Standard Test Method for Performance of Upright Overfired Broilers
ASTM F2238 – 09 : Standard Test Method for Performance of Rapid Cook Ovens
ASTM F2239 – 10 : Standard Test Method for Performance of Conveyor Broilers
ASTM F2240 – 08(2013) : Standard Specification for Manufacturer Quality Assurance Program for Powered Parachute Aircraft
ASTM F2241 – 13 : Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft
ASTM F2242 – 05(2013) : Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft
ASTM F2243 – 11(2013) : Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft
ASTM F2244 – 13 : Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft
ASTM F2245 – 13b : Standard Specification for Design and Performance of a Light Sport Airplane
ASTM F2246 – 06(2013) : Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
ASTM F2247 – 11 : Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
ASTM F2248 – 12 : Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
ASTM F2249 – 03(2009) : Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
ASTM F2250 – 13 : Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
ASTM F2251 – 13 : Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM F2252 / F2252M – 13e1 : Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
ASTM F2255 – 05(2010) : Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM F2256 – 05(2010) : Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
ASTM F2257 – 09 : Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
ASTM F2258 – 05(2010) : Standard Test Method for Strength Properties of Tissue Adhesives in Tension
ASTM F2259 – 10(2012)e1 : Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
ASTM F2260 – 03(2012)e1 : Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
ASTM F2261 – 06(2011) : Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
ASTM F2262 – 09 : Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
ASTM F2263 – 07(2011) : Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
ASTM F2264 – 14 : Standard Consumer Safety Specification for Non-Powered Scooters
ASTM F2266 – 03(2008)e1 : Standard Specification for Masses Used in Testing Rescue Systems and Components
ASTM F2267 – 04(2011) : Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
ASTM F2268 – 03(2010) : Standard Specification for Bicycle Serial Numbers
ASTM F2269 – 11 : Standard Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
ASTM F2270 – 12 : Standard Guide for Construction and Maintenance of Warning Track Areas on Athletic Fields
ASTM F2271 – 11 : Standard Specification for Paintball Marker Barrel Blocking Devices
ASTM F2272 – 13 : Standard Specification for Paintball Markers
ASTM F2273 – 11 : Standard Test Methods for Bicycle Forks
ASTM F2274 – 11 : Standard Specification for Condition 3 Bicycle Forks
ASTM F2275 – 10 : Standard Practice for Treestand Manufacturer Quality Assurance Program
ASTM F2276 – 10 : Standard Specification for Fitness Equipment
ASTM F2277 – 12 : Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
ASTM F2278 – 10a : Standard Test Method for Evaluating Paintball Barrier Netting
ASTM F2279 – 10 : Standard Practice for Quality Assurance in the Manufacture of Fixed Wing Light Sport Aircraft
ASTM F2280 – 12 : Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM F2281 – 04(2012) : Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM F2282 – 03(2009)e1 : Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F2283 – 12 : Standard Specification for Shipboard Oil Pollution Abatement System
ASTM F2285 – 04(2010) : Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
ASTM F2286 – 05(2013) : Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
ASTM F2291 – 14 : Standard Practice for Design of Amusement Rides and Devices
ASTM F2292 – 03(2008) : Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods—Drip, Spray, Submersion and Rub
ASTM F2293 – 03(2008) : Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers
ASTM F2294 – 03(2009) : Standard Practice for Determining the Writeability of Print Media
ASTM F2295 – 10 : Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft
ASTM F2296 – 04(2012) : Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods—Score/Tape, Cross Hatch, X-Cut, and Crease-Folding
ASTM F2298 – 03(2009)e1 : Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell
ASTM F2299 / F2299M – 03(2010) : Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM F2300 – 10 : Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing
ASTM F2302 – 08 : Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant
ASTM F2303 – 03(2009) : Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
ASTM F2304 – 10 : Standard Practice for Sealing of Sewers Using Chemical Grouting
ASTM F2306 / F2306M – 13 : Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM F2311 – 08 : Standard Guide for Classification of Therapeutic Skin Substitutes
ASTM F2312 – 11 : Standard Terminology Relating to Tissue Engineered Medical Products
ASTM F2313 – 10 : Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
ASTM F2315 – 11 : Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
ASTM F2316 – 12 : Standard Specification for Airframe Emergency Parachutes
ASTM F2317 / F2317M – 10 : Standard Specification for Design of Weight-Shift-Control Aircraft
ASTM F2320 – 11 : Standard Specification for Rubber Insulating Sheeting
ASTM F2321 – 05(2013) : Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
ASTM F2322 – 12 : Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
ASTM F2324 – 13 : Standard Test Method for Prerinse Spray Valves
ASTM F2325 – 03(2009) : Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
ASTM F2326 – 04(2009) : Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn
ASTM F2327 – 08 : Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
ASTM F2328 – 05(2011) : Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F2328M – 07(2014) : Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs (Metric)
ASTM F2329 – 13 : Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM F2331 – 11 : Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM F2332 – 06(2013) : Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
ASTM F2333 – 04(2011) : Standard Test Method for Traction Characteristics of the Athletic Shoe–Sports Surface Interface
ASTM F2334 – 09 : Standard Guide for Above Ground Public Use Skatepark Facilities
ASTM F2337 – 11 : Standard Test Method for Treestand Fall Arrest System
ASTM F2338 – 09(2013) : Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM F2339 – 06(2009) : Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
ASTM F2340 – 05(2010) : Standard Specification for Developing and Validating Prediction Equations or Models Used in Connection with Livestock, Meat, and Poultry Evaluation Devices or Systems to Determine Value
ASTM F2341 – 05(2010) : Standard Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices or Systems
ASTM F2342 / F2342M – 09 : Standard Specification for Design and Construction of Composition or Quality Constituent Measuring Devices or Systems
ASTM F2343 – 09 : Standard Test Method for Livestock, Meat, and Poultry Evaluation Devices
ASTM F2345 – 03(2013) : Standard Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
ASTM F2346 – 05(2011) : Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM F2347 – 11 : Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
ASTM F2348 – 04(2010) : Standard Performance Specification for Privacy Padlocks
ASTM F2349 – 04(2010) : Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
ASTM F2350 – 04(2010) : Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
ASTM F2352 – 11 : Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft
ASTM F2353 – 05(2013) : Standard Specification for Manufacturer Quality Assurance Program for Lighter-Than-Air Light Sport Aircraft
ASTM F2354 – 05b(2013) : Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft
ASTM F2355 – 13 : Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
ASTM F2356 – 05a(2013) : Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
ASTM F2357 – 10 : Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool “RCA” Abrader
ASTM F2359 – 04(2011) : Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
ASTM F2360 – 08 : Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
ASTM F2361 – 03(2013) : Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
ASTM F2362 – 03(2013) : Standard Specification for Temperature Monitoring Equipment
ASTM F2363 / F2363M – 12 : Standard Specification for Sewage and Graywater Flow Through Treatment Systems
ASTM F2366 – 12 : Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
ASTM F2367 – 04a(2010) : Standard Specification for Labeling for Upright Brooms for Consumer and Institutional Use
ASTM F2368 – 04(2010) : Standard Specification for Labeling for Wet Mops for Consumer and Institutional Use
ASTM F2369 – 04(2010) : Standard Safety Specification for Non-Integral Firearm Locking Devices
ASTM F2370 – 10 : Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
ASTM F2371 – 10 : Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
ASTM F2372 – 11a : Standard Consumer Safety Performance Specification for Shopping Carts
ASTM F2373 – 11 : Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
ASTM F2374 – 10 : Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
ASTM F2375 – 09 : Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
ASTM F2376 – 13 : Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
ASTM F2378 – 05(2011) : Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
ASTM F2379 – 04(2010) : Standard Test Method for Energy Performance of Powered Open Warewashing Sinks
ASTM F2380 – 04(2010) : Standard Test Method for Performance of Conveyor Toasters
ASTM F2381 – 10 : Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM F2382 – 04(2010) : Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)
ASTM F2383 – 11 : Standard Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)
ASTM F2384 – 10 : Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM F2385 – 04(2010) : Standard Test Method for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
ASTM F2387 – 04(2012) : Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs
ASTM F2388 – 09 : Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use
ASTM F2389 – 10 : Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
ASTM F2390 – 12 : Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
ASTM F2391 – 05(2011) : Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
ASTM F2392 – 04(2010) : Standard Test Method for Burst Strength of Surgical Sealants
ASTM F2393 – 12 : Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
ASTM F2394 – 07(2013) : Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System
ASTM F2396 – 11 : Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields
ASTM F2397 – 09 : Standard Specification for Protective Headgear Used in Martial Arts
ASTM F2398 – 11 : Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM F24 – 09 : Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F2400 – 06(2011) : Standard Specification for Helmets Used in Pole Vaulting
ASTM F2401 – 04(2010) : Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
ASTM F2403 – 09 : Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
ASTM F2405 – 04(2011) : Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F2406 – 04(2012) : Standard Practice for Determining Yield of Solid Ink Sticks
ASTM F2407 – 06(2013)e1 : Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities
ASTM F2408 – 11 : Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
ASTM F2409 – 10 : Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
ASTM F2412 – 11 : Standard Test Methods for Foot Protection
ASTM F2413 – 11 : Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
ASTM F2414 – 04(2009) : Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
ASTM F2415 – 09 : Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft
ASTM F2416 – 06(2011) : Standard Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices
ASTM F2417 – 11 : Standard Specification for Fire Safety for Candles
ASTM F2418 – 13 : Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
ASTM F2419 – 11 : Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
ASTM F2420 – 05(2011) : Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
ASTM F2421 – 05(2011) : Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage
ASTM F2423 – 11 : Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
ASTM F2425 – 05a(2009) : Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
ASTM F2426 – 13 : Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft
ASTM F2427 – 05a(2013) : Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft
ASTM F2428 – 04(2011) : Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
ASTM F2429 – 05(2010) : Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
ASTM F2430 – 04(2012) : Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
ASTM F2431 – 04(2012) : Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
ASTM F2432 – 12 : Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment
ASTM F2433 – 05(2013) : Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM F2434 – 09 : Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
ASTM F2435 – 12 : Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
ASTM F2436 – 05(2011) : Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test
ASTM F2437 – 14 : Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM F2438 – 04(2010) : Standard Specification for Oil Spill Response Boom Connection: Slide Connector
ASTM F2439 – 06(2011) : Standard Specification for Headgear Used in Soccer
ASTM F2440 – 11 : Standard Specification for Indoor Wall/Feature Padding
ASTM F2441 – 12 : Standard Practice for Labeling of Backpacking and Mountaineering Tents and Bivouac Sacks
ASTM F2442 – 07 : Standard Guide for Layout of Ice Arena
ASTM F2443 – 04(2012) : Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
ASTM F2444 – 04(2012) : Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
ASTM F2446 – 04(2010) : Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
ASTM F2447 – 05(2009) : Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
ASTM F2448 – 04(2009) : Standard Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft
ASTM F2449 – 09 : Standard Specification for Manufacturer Quality Assurance Program for Light Sport Gyroplane Aircraft
ASTM F2450 – 10 : Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products
ASTM F2451 – 05(2010) : Standard Guide for in vivo Assessment of Implantable Devices Intended to Repair or Regenerate Articular Cartilage
ASTM F2452 – 04(2012) : Standard Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress: Two Different Test Methods—Score/Tape and Cross Hatch
ASTM F2453 / F2453M – 14 : Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2? [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
ASTM F2454 – 05(2010) : Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
ASTM F2456 – 04(2009) : Standard Specification for Youth-Resistant Firearms Containers (YRFCs)
ASTM F2457 – 05(2009) : Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft
ASTM F2458 – 05(2010) : Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
ASTM F2459 – 12 : Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
ASTM F2460 – 11 : Standard Practice for Special Requirements for Bumper Boats
ASTM F2461 – 09 : Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
ASTM F2462 – 05(2010) : Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
ASTM F2463 – 12be1 : Standard Terminology for Livestock, Meat, and Poultry Evaluation Systems
ASTM F2464 – 12 : Standard Guide for Cleaning of Various Oiled Shorelines and Habitats
ASTM F2465 / F2465M – 05(2011)e1 : Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems
ASTM F2466 – 10 : Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
ASTM F2467 – 06(2013) : Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
ASTM F2468 – 05(2011) : Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM F2469 – 10 : Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F2471 – 13 : Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
ASTM F2472 – 05(2010) : Standard Test Method for Performance of Staff-Serve Hot Deli Cases
ASTM F2473 – 12 : Standard Test Method for Performance of Water-Bath Rethermalizers
ASTM F2474 – 09 : Standard Test Method for Heat Gain to Space Performance of Commercial Kitchen Ventilation/Appliance Systems
ASTM F2475 – 11 : Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
ASTM F2476 – 13 : Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using An Infrared Detector
ASTM F2477 – 07(2013) : Standard Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents
ASTM F2479 – 12 : Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
ASTM F2480 – 06(2012) : Standard Guide for In-ground Concrete Skatepark
ASTM F2482 – 08 : Standard Specification for Load-Indicating Externally Threaded Fasteners
ASTM F2483 – 12 : Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
ASTM F2487 – 13 : Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
ASTM F2488 – 05(2013) : Standard Terminology for Rolling Element Bearings
ASTM F2489 – 06(2013) : Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases
ASTM F2490 – 05(2013) : Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis
ASTM F2491 – 05(2010)e1 : Standard Guide for Determining Load Ratios for Technical Rescue Systems and Equipment
ASTM F2493 – 08 : Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM F2494 – 05(2011) : Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment
ASTM F2495 – 05(2011) : Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment
ASTM F2496 – 05(2011)e1 : Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM F2497 – 05(2011)e1 : Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester
ASTM F2498 – 05(2011) : Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method
ASTM F25 / F25M – 09 : Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
ASTM F2500 – 07 : Standard Practice for Unmanned Aircraft System (UAS) Visual Range Flight Operations
ASTM F2501 – 06 : Standard Practices for Unmanned Aircraft System Airworthiness
ASTM F2502 – 11 : Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants
ASTM F2503 – 13 : Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ASTM F2504 – 05(2014) : Standard Practice for Describing System Output of Implantable Middle Ear Hearing Devices
ASTM F2506 – 13 : Standard Specification for Design and Testing of Light Sport Aircraft Propellers
ASTM F2507 – 05(2010) : Standard Specification for Recreational Airpark Design
ASTM F2508 – 13 : Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM F2509 – 12 : Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
ASTM F2510 / F2510M – 07(2013) : Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
ASTM F2511 – 05(2013) : Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
ASTM F2512 – 07 : Standard Practice for Quality Assurance in the Manufacture of Light Unmanned Aircraft System
ASTM F2514 – 08(2014) : Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
ASTM F2516 – 07e2 : Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
ASTM F2517 – 09 : Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
ASTM F2518 – 06 : Standard Guide for Use of a Residential Swimming Pool, Spa, and Hot Tub Safety Audit to Prevent Unintentional Drowning
ASTM F2519 – 05(2011)e1 : Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
ASTM F2520 – 05(2012) : Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
ASTM F2521 – 09(2014) : Standard Specification for Heavy-Duty Ranges, Gas and Electric
ASTM F2522 – 12 : Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards
ASTM F2523 – 13 : Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
ASTM F2524 – 06(2013) : Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications
ASTM F2527 – 10 : Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
ASTM F2528 – 06(2014) : Standard Test Methods for Enteral Feeding Devices with a Retention Balloon
ASTM F2529 – 13 : Standard Guide for in vivo Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)
ASTM F2530 – 13 : Standard Specification for Protective Headgear with Faceguard Used in Bull Riding
ASTM F2531 – 13 : Standard Test Method for Load Capacity of Treestand Seats
ASTM F2532 – 13 : Standard Guide for Determining Net Environmental Benefit of Dispersant Use
ASTM F2533 – 07(2013) : Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels
ASTM F2534 – 12 : Standard Guide for Visually Estimating Oil Spill Thickness on Water
ASTM F2536 – 06b(2011) : Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
ASTM F2537 – 06(2011) : Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
ASTM F2538 – 07a(2010) : Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft
ASTM F2541 – 06 : Standard Guide for Unmanned Undersea Vehicles (UUV) Autonomy and Control
ASTM F2542 – 05(2012) : Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
ASTM F2544 – 11 : Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM F2545 – 07 : Standard Guide for Unmanned Undersea Vehicle (UUV) Physical Payload Interface
ASTM F2546 – 07(2012) : Standard Test Method for Snowboard Step-in Bindings
ASTM F2547 – 06(2013) : Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM F2548 – 12 : Standard Specification for Expanded Metal Fence Systems for Security Purposes
ASTM F2549 – 14 : Standard Consumer Safety Specification for Frame Child Carriers
ASTM F2550 – 13 : Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall
ASTM F2551 – 09 : Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
ASTM F2553 – 11 : Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
ASTM F2554 – 10 : Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems
ASTM F2555 – 06(2011) : Standard Practice for Determining Page Yield of Ink Jet Printer Cartridges—Continuous Printing Method
ASTM F2559 / F2559M – 06(2010)e1 : Standard Guide for Writing a Specification for Sterilizable Peel Pouches
ASTM F256 – 05(2010) : Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
ASTM F2560 – 06 : Standard Specification for Supralaryngeal Airways and Connectors
ASTM F2561 – 11 : Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
ASTM F2562 / F2562M – 08 : Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ASTM F2563 – 06(2010) : Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation
ASTM F2564 – 13 : Standard Specification for Design and Performance of a Light Sport Glider
ASTM F2565 – 13 : Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
ASTM F2567 – 06(2010) : Standard Practice for Testing for Classical Pathway Complement Activation in Serum by Solid Materials
ASTM F2568 – 06(2012) : Standard Test Method for Measurement of Sleeping Bags
ASTM F2569 – 11 : Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ASTM F2571 – 09 : Standard Test Methods for Evaluating Design and Performance Characteristics of Fitness Equipment
ASTM F2573 – 06(2010) : Standard Specification for Low Velocity Resilient Material Projectile
ASTM F2574 – 06(2010) : Standard Specification for Low Velocity Projectile Marker
ASTM F2575 – 06 : Standard Guide for Quality Assurance in Translation
ASTM F2576 – 13 : Standard Terminology Relating to Declarable Substances in Materials
ASTM F2577 – 14 : Standard Guide for Assessment of Materials and Products for Declarable Substances
ASTM F2579 – 10 : Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
ASTM F2580 – 13 : Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis
ASTM F2581 – 12 : Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
ASTM F2582 – 14 : Standard Test Method for Impingement of Acetabular Prostheses
ASTM F2584 – 06 : Standard Practice for Maintenance and Development of Maintenance Manuals for Light Unmanned Aircraft System (UAS)
ASTM F2585 – 08 : Standard Specification for Design and Performance of Pneumatic-Hydraulic Unmanned Aircraft System (UAS) Launch System
ASTM F2588 – 12 : Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles
ASTM F2589 – 11 : Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
ASTM F2590 – 06(2013) : Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
ASTM F2591 – 06(2013) : Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
ASTM F2592 – 10 : Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
ASTM F2594 – 07 : Standard Guide for Unmanned Undersea Vehicle (UUV) Communications
ASTM F2595 – 07 : Standard Guide for Unmanned Undersea Vehicle (UUV) Sensor Data Formats
ASTM F2598 – 09 : Standard Consumer Safety Specification for Clothing Storage Chests
ASTM F2599 – 11 : Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
ASTM F2600 – 09(2013) : Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
ASTM F2601 – 13 : Standard Specification for Fire Safety for Candle Accessories
ASTM F2602 – 13 : Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM F2603 – 06(2012) : Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds
ASTM F2605 – 08e1 : Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM F2606 – 08(2014) : Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2607 – 08 : Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM F2608 – 07 : Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
ASTM F2609 – 11 : Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
ASTM F2611 – 11 : Standard Guide for Design and Construction of Chain Link Security Fencing
ASTM F2613 – 13 : Standard Consumer Safety Specification for Children’s Chairs and Stools
ASTM F2614 – 09(2014) : Standard Specification for Condition 3 Bicycle Frames
ASTM F2617 – 08e1 : Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM F2618 – 09 : Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
ASTM F2619 / F2619M – 13 : Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F2620 – 13 : Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
ASTM F2621 – 12 : Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure
ASTM F2622 – 08(2013) : Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F2623 – 08 : Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
ASTM F2624 – 12 : Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs
ASTM F2625 – 10 : Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F2626 – 12 : Standard Terminology for Light Sport Aircraft
ASTM F2630 – 07 : Standard Guide for Self-Closing/Self-Latching General-Purpose Gates
ASTM F2631 – 07 : Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities
ASTM F2632 – 07(2013)e1 : Standard Practice for Determining the Toner Usage for Color Printer Cartridges
ASTM F2633 – 13 : Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
ASTM F2634 – 10 : Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM F2638 – 12 : Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
ASTM F2639 – 07e1 : Standard Practice for Design, Alteration, and Certification of Airplane Electrical Wiring Systems
ASTM F2640 – 14 : Standard Consumer Safety Specification for Booster Seats
ASTM F2641 – 08 : Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
ASTM F2642 – 08 : Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes
ASTM F2643 – 09 : Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
ASTM F2644 – 07(2013) : Standard Test Method for Performance of Commercial Patio Heaters
ASTM F2645 – 07(2011) : Standard Specification for Bun Slicing Machines
ASTM F2646 – 07(2011) : Standard Specification for Bread Slicing Machines
ASTM F2647 – 07(2013) : Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
ASTM F2648 / F2648M – 13 : Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
ASTM F2649 – 08a : Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM F2650 – 13 : Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment
ASTM F2651 – 10 : Standard Terminology Relating to Soil and Turfgrass Characteristics of Natural Playing Surfaces
ASTM F2653 – 11 : Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
ASTM F2654 – 14 : Standard Specification for Low Energy Air Gun (LEAG) Warnings
ASTM F2656 – 07 : Standard Test Method for Vehicle Crash Testing of Perimeter Barriers
ASTM F2657 – 07(2012) : Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
ASTM F2658 – 07(2013) : Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
ASTM F2659 – 10 : Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
ASTM F2660 – 13 : Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
ASTM F2661 – 07 : Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
ASTM F2662 – 08(2014) : Standard Guide for Minimum Training of Dispatchers and Telecommunicators of SAR Incidents
ASTM F2663 – 07a : Standard Test Method for Bead Unseating of Tubeless Tires for Motor Vehicles with GVWR of 4536 kg (10 000 lb) or Less
ASTM F2664 – 11 : Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
ASTM F2665 – 09 : Standard Specification for Total Ankle Replacement Prosthesis
ASTM F2666 – 07 : Standard Specification for Aboveground Portable Pools for Residential Use
ASTM F2668 – 07(2011) : Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles
ASTM F2669 – 12 : Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides
ASTM F2670 – 13 : Standard Consumer Safety Specification for Infant Bath Tubs
ASTM F2673 – 08 : Standard Safety Specification for Special Tip-Resistant Movable Soccer Goals
ASTM F2675 / F2675M – 13 : Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM F2676 – 09 : Standard Test Method for Determining the Protective Performance of an Arc Protective Blanket for Electric Arc Hazards
ASTM F2677 – 08a(2013) : Standard Specification for Electrically Insulating Aprons
ASTM F2678 – 10 : Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring
ASTM F2679 – 13 : Standard Specification for 6?mm Projectiles Used with Low Energy Air Guns
ASTM F2680 – 09(2014) : Standard Specification for Manually Operated Front Wheel Retention Systems for Bicycles
ASTM F2681 – 08 : Standard Specification for Body Protectors Used in Equine Racing
ASTM F2682 – 07(2012)e1 : Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
ASTM F2683 – 11 : Standard Guide for Selection of Booms for Oil-Spill Response
ASTM F2684 / F2684M – 07(2012)e1 : Standard Test Method for Portable High Anchor Devices
ASTM F2685 – 14 : Standard Guide for Training of a Land Search Team Leader (STL)
ASTM F2686 – 10 : Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
ASTM F2687 – 13 : Standard Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment
ASTM F2688 – 08(2014) : Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
ASTM F269 – 60(2009) : Standard Test Method for Sag of Tungsten Wire
ASTM F2694 – 07(2013) : Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
ASTM F2695 – 12 : Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
ASTM F2696 – 14 : Standard Practice for Inspection of Aircraft Electrical Wiring Systems
ASTM F2698 – 08(2013) : Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities
ASTM F2699 – 08(2013) : Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
ASTM F2700 – 08(2013) : Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating
ASTM F2701 – 08 : Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash
ASTM F2702 – 08 : Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction
ASTM F2703 – 08(2013) : Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction
ASTM F2704 – 10 : Standard Specification for Air-Fed Protective Ensembles
ASTM F2706 – 08 : Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
ASTM F2707 – 10 : Standard Safety Performance Specification for Safe Design and Installation of Field Fabricated Suction-Limiting Vent Systems for Suction Entrapment Prevention in Swimming Pools, Spas, Hot Tubs, and Wading Pools
ASTM F2709 – 08 : Standard Test Method for Determining Nameplate Recovery Rate of Stationary Oil Skimmer Systems
ASTM F2710 – 13 : Standard Consumer Safety Performance Specification for Commercial Cribs
ASTM F2711 – 08(2012) : Standard Test Methods for Bicycle Frames
ASTM F2713 – 13 : Standard Specification for Eye Protectors for Field Hockey
ASTM F2714 – 08(2013) : Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
ASTM F2715 – 09 : Standard Specification for Temporary Protective Equipotential Bond Mat To Be Used on De-Energized Equipment
ASTM F2716 – 08 : Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
ASTM F2717 – 14 : Standard Guide for Development of an Independent Third-Party Verification of Reference Materials
ASTM F2718 – 09 : Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
ASTM F2719 – 09 : Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
ASTM F2720 / F2720M – 09 : Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
ASTM F2721 – 09 : Standard Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects
ASTM F2722 – 08 : Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
ASTM F2723 – 13a : Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
ASTM F2724 – 08(2014) : Standard Test Method for Evaluating Mobile Bearing Knee Dislocation
ASTM F2725 – 11 : Standard Guide for European Union’s Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
ASTM F2726 – 08 : Standard specification for fixation devices for tracheal tubes and other airway devices
ASTM F2727 – 09 : Standard Guide for Manufacturers for Labeling Headgear Products
ASTM F2729 – 12 : Standard Consumer Safety Specification for Constant Air Inflatable Play Devices for Home Use
ASTM F2730 / F2730M – 14 : Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
ASTM F2731 – 11 : Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
ASTM F2732 – 11 : Standard Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing
ASTM F2733 – 09 : Standard Specification for Flame Resistant Rainwear for Protection Against Flame Hazards
ASTM F2734 – 08 : Standard Practice for Testing the Shelf Life of Ink Jet Printer Cartridges
ASTM F2735 – 09 : Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
ASTM F2736 – 13 : Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
ASTM F2737 – 11 : Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F2739 – 08 : Standard Guide for Quantitating Cell Viability Within Biomaterial Scaffolds
ASTM F2743 – 11 : Standard Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems
ASTM F2745 – 11 : Standard Specification for Required Product Information to be Provided with an Airplane
ASTM F2746 – 12 : Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane
ASTM F2747 – 10 : Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees
ASTM F2748 – 14 : Standard Specification for Low Energy Air Guns
ASTM F2749 – 09 : Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly
ASTM F2750 – 09 : Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly
ASTM F2751 – 09 : Standard Guide for Training of Support Level Land Rescue Team Member (LRT-Support) Member
ASTM F2752 – 09(2014) : Standard Guide for Training for Level I Rope Rescue (R1) Rescuer Endorsement
ASTM F2753 – 10 : Standard Practice to Evaluate the Effect of Dynamic Rolling Load over Resilient Floor Covering System
ASTM F2754 / F2754M – 09(2013) : Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire
ASTM F2755 – 14 : Standard Safety Specification for Cautionary Labeling of Inflatable Air Mattresses
ASTM F2756 – 11 : Standard Test Method for Determining Energy Consumption of Vacuum Cleaners
ASTM F2757 – 09 : Standard Guide for Home Laundering Care and Maintenance of Flame, Thermal and Arc Resistant Clothing
ASTM F2759 – 11 : Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
ASTM F2760 – 09 : Standard Practice for Testing Ink Jet Cartridge Latency (Start-Up)
ASTM F2761 – 09(2013) – Medical Devices and Medical Systems – Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) – Part 1: General requirements and conceptual model
ASTM F2762 – 11e1 : Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F2763 – 11 : Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F2764 / F2764M – 11ae1 : Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
ASTM F2765 – 09 : Standard Specification for Total Lead Content in Synthetic Turf Fibers
ASTM F2766 – 11 : Standard Test Method for Boat Barriers
ASTM F2767 – 12 : Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
ASTM F2768 – 09 : Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components
ASTM F2769 – 10 : Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
ASTM F2771 – 10 : Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM F2772 – 11 : Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems
ASTM F2773 – 13 : Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
ASTM F2774 – 09 : Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material
ASTM F2777 – 10 : Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
ASTM F2778 – 09 : Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM F2779 – 10 : Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
ASTM F2780 – 09(2014) : Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
ASTM F2781 – 10 : Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
ASTM F2783 – 14 : Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
ASTM F2785 – 12 : Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
ASTM F2786 – 10 : Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
ASTM F2787 – 13 : Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
ASTM F2788 / F2788M – 13 : Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe
ASTM F2789 – 10 : Standard Guide for Mechanical and Functional Characterization of Nucleus Devices
ASTM F2790 – 10 : Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
ASTM F2791 – 09 : Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
ASTM F2792 – 12a : Standard Terminology for Additive Manufacturing Technologies,
ASTM F2794 – 09(2014) : Standard Guide for Level 1 (Basic) Mounted Search and Rescue (MSAR) Responder
ASTM F2795 – 11 : Standard Test Method for Performance of Self-Contained Soft Serve and Shake Machines
ASTM F2796 – 09(2014) : Standard Specification for Hot Food Holding Tables
ASTM F2797 – 10 : Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners
ASTM F2798 – 09 : Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ASTM F2799 – 14 : Standard Practice for Maintenance of Aircraft Electrical Wiring Systems
ASTM F2800 – 11 : Standard Specification for Recirculating Hood System for Cooking Appliances
ASTM F2801 – 11 : Standard Practice for Paintball Player Safety Briefing
ASTM F2802 – 09 : Standard Specification for Condition 1 Bicycle Frames
ASTM F2803 – 09 : Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels
ASTM F2805 – 11 : Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
ASTM F2806 – 10e1 : Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM F2807 – 13 : Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
ASTM F2808 – 10 : Standard Test Method for Performing Behind-the-Knee (BTK) Test for Evaluating Skin Irritation Response to Products and Materials That Come Into Repeated or Extended Contact with Skin
ASTM F2809 – 10 : Standard Terminology Relating to Medical and Surgical Materials and Devices
ASTM F2810 – 10 : Standard Specification for Elliptical Trainers
ASTM F2811 – 10 : Standard Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers
ASTM F2812 – 12 : Standard Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports
ASTM F2813 – 12 : Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables
ASTM F2814 – 09 : Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
ASTM F2815 – 10(2014) : Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program
ASTM F2817 – 13 : Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
ASTM F2818 – 10 : Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ASTM F2819 – 10 : Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
ASTM F2820 – 12 : Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM F2821 – 10 : Standard Test Methods for Basket Type Rescue Litters
ASTM F2822 – 10 : Standard Specification for Fixed Anchorages Installed on Structures used for Rope Rescue Training
ASTM F2823 – 10 : Standard Guide for In-Situ Burning of Oil Spills in Marshes
ASTM F2824 – 10e1 : Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM F2825 – 10e1 : Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
ASTM F2826 – 14 : Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units
ASTM F2828 – 12 : Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
ASTM F2829 – 10 : Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems
ASTM F2830 – 11 : Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
ASTM F2831 – 12 : Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
ASTM F2832 – 11 : Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
ASTM F2833 – 11 : Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
ASTM F2834 – 10a : Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing
ASTM F2835 – 10 : Standard Specification for Underfired Broilers
ASTM F2837 – 11 : Standard Test Method for Hot Compression Properties of Gasket Materials
ASTM F2838 – 10 : Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
ASTM F2839 – 11 : Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
ASTM F2840 – 11 : Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft
ASTM F2842 – 11 : Standard Specification for Reins Used in Thoroughbred and Quarter Horse Racing
ASTM F2843 – 10a : Standard Specification for Condition 0 Bicycle Frames
ASTM F2844 – 11 : Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
ASTM F2845 – 14 : Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
ASTM F2847 – 10 : Standard Practice for Reporting and Assessment of Residues on Single Use Implants
ASTM F2848 – 10 : Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
ASTM F2849 – 10 : Standard Practice for Handling of Unmanned Aircraft Systems at Divert Airfields
ASTM F2851 – 10 : Standard Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems)
ASTM F2852 – 10 : Standard Practice for Training a Land Search Tracker
ASTM F2853 – 10e1 : Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
ASTM F2854 – 10 : Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
ASTM F2855 – 12 : Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
ASTM F2856 – 12 : Standard Practice for Transfilling and Safe Handling of Small CO2 Cylinders for Use in Paintball
ASTM F2861 – 14 : Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
ASTM F2863 – 11 : Standard Specification for Central Vacuum Hose Inlet Valve Socket Dimensions
ASTM F2865 – 13 : Standard Guide for Classifying the Degrees of Ingress of Dust and Water into a Membrane Switch
ASTM F2866 – 11 : Standard Test Method for Flammability of a Membrane Switch in Defined Assembly
ASTM F2867 – 13 : Standard Terminology Relating to Thoroughbred Horse Racing Surfaces
ASTM F2868 – 10 : Standard Specification for Condition 2 Bicycle Frames
ASTM F2869 – 10 : Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface
ASTM F2870 – 11 : Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM F2871 – 11 : Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
ASTM F2872 – 11 : Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
ASTM F2873 – 13 : Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
ASTM F2874 – 12 : Standard Specification for One Time Use Portable Emergency Fuel Containers (PEFC) for Use by Consumers
ASTM F2875 – 10 : Standard Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods
ASTM F2876 – 10 : Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
ASTM F2877 / F2877M – 13e1 : Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
ASTM F2878 – 10 : Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
ASTM F288 – 96(2009) : Standard Specification for Tungsten Wire for Electron Devices and Lamps
ASTM F2880 – 14 : Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.
ASTM F2881 – 11 : Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F2882 – 12 : Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength
ASTM F2882M – 12 : Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric]
ASTM F2883 – 11 : Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications
ASTM F2884 – 12 : Standard Guide for Pre-clinical in vivo Evaluation of Spinal Fusion
ASTM F2885 – 11 : Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
ASTM F2886 – 10 : Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
ASTM F2887 – 12 : Standard Specification for Total Elbow Prostheses
ASTM F2888 – 13 : Standard Test Method for Platelet Leukocyte Count—An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials
ASTM F2889 – 11 : Standard Practice for Assessing Language Proficiency
ASTM F289 – 96(2009) : Standard Specification for Molybdenum Wire and Rod for Electronic Applications
ASTM F2890 – 12 : Standard Guide for Hazard Awareness for Search and Rescue Personnel
ASTM F2891 – 10 : Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated
ASTM F2892 – 11 : Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
ASTM F2894 – 14 : Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM F2895 – 10 : Standard Practice for Digital Radiography of Cast Metallic Implants
ASTM F2896 – 11 : Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
ASTM F2897 – 11ae1 : Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
ASTM F2898 – 11 : Standard Test Method for Permeability of Synthetic Turf Sports Field Base Stone and Surface System by Non-confined Area Flood Test Method
ASTM F2899 – 11 : Standard Specification for Condition 1 Bicycle Forks
ASTM F29 – 97(2012) : Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications
ASTM F290 – 94(2010) : Standard Specification for Round Wire for Winding Electron Tube Grid Laterals
ASTM F2900 – 11 : Standard Guide for Characterization of Hydrogels used in Regenerative Medicine
ASTM F2901 – 13 : Standard Guide for Selecting Tests to Evaluate Potential Neurotoxicity of Medical Devices
ASTM F2902 – 12 : Standard Guide for Assessment of Absorbable Polymeric Implants
ASTM F2903 – 11 : Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair
ASTM F2904 – 11 : Standard Specification for Warnings on Paintball Marker Accessories Used In the Sport of Paintball
ASTM F2905 / F2905M – 13 : Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
ASTM F2906 – 13 : Standard Consumer Safety Specification for Bedside Sleepers
ASTM F2907 – 14a : Standard Consumer Safety Specification for Sling Carriers
ASTM F2908 – 14 : Standard Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS)
ASTM F2909 – 14 : Standard Practice for Maintenance and Continued Airworthiness of Small Unmanned Aircraft Systems (sUAS)
ASTM F2910 – 14 : Standard Specification for Design and Construction of a Small Unmanned Aircraft System (sUAS)
ASTM F2911 – 14e1 : Standard Practice for Production Acceptance of Small Unmanned Aircraft System (sUAS)
ASTM F2912 – 11 : Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM F2913 – 11 : Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
ASTM F2914 – 12 : Standard Guide for Identification of Shelf-life Test Attributes for Endovascular Devices
ASTM F2916 – 11 : Standard Practice for Environmental Impact Analysis of Commercial Food Service Equipment
ASTM F2917 – 12 : Standard Specification for Bicycle Trailer Cycles Designed for Human Passengers
ASTM F2918 – 11 : Standard Test Method for Weighing a Bicycle
ASTM F2919 / F2919M – 12 : Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
ASTM F2922 – 13e1 : Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
ASTM F2923 – 11 : Standard Specification for Consumer Product Safety for Children’s Jewelry
ASTM F2924 – 14 : Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
ASTM F2925 – 11 : Standard Specification for Tenderness Marketing Claims Associated with Meat Cuts Derived from Beef
ASTM F2926 – 12 : Standard Guide for Selection and Operation of Vessel-mounted Camera Systems
ASTM F2927 – 12 : Standard Test Method for Door Systems Subject to Airblast Loadings
ASTM F2928 – 13 : Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
ASTM F2929 – 13 : Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
ASTM F2930 – 14 : Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM F2931 – 14 : Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM F2933 – 13 : Standard Consumer Safety Specification for Crib Mattresses
ASTM F2934 – 12 : Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
ASTM F2935 – 12 : Standard Specification for Chocks, Panama, Mooring Cast Steel
ASTM F2936 – 12 : Standard Specification for Chocks, Ship Mooring, Cast Steel
ASTM F2939 – 13 : Standard Specification for High Voltage Phasing Testers
ASTM F2940 – 13 : Standard Practice for Air Soft Field Operation
ASTM F2941 – 13 : Standard Practice for Air Soft Player Safety Briefing
ASTM F2942 – 13 : Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents
ASTM F2943 – 14 : Standard Guide for Presentation of End User Labeling Information for Musculoskeletal Implants
ASTM F2944 – 12 : Standard Test Method for Automated Colony Forming Unit (CFU) Assays—Image Acquisition and Analysis Method for Enumerating and Characterizing Cells and Colonies in Culture
ASTM F2945 – 12a : Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
ASTM F2946 – 12 : Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
ASTM F2947 / F2947M – 14 : Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F2948 – 13 : Standard Guide to Walkway Auditor Qualifications
ASTM F2949 – 12e2 : Standard Specification for Pole Vault Box Collars
ASTM F2951 – 13 : Standard Consumer Safety Specification for Baby Monitors
ASTM F2952 – 14 : Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
ASTM F2953 – 12 : Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
ASTM F2954 – 12 : Standard Guide for Training for Level II Rope Rescue (R2) Rescuer Endorsement
ASTM F2955 – 12 : Standard Guide for Training for Level III Rope Rescue (R3) Rescuer Endorsement
ASTM F2957 – 13 : Standard Specification for Ornamental Aluminum Fence Systems
ASTM F2959 – 14 : Standard Practice for Special Requirements for Aerial Adventure Courses
ASTM F2962 – 13 : Standard Practice for Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides
ASTM F2964 – 12 : Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
ASTM F2965 – 13 : Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial (Not Including Construction) Environments
ASTM F2966 – 13 : Standard Guide for Snow and Ice Control for Walkway Surfaces
ASTM F2968 / F2968M – 14 : Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
ASTM F2969 – 12 : Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
ASTM F2970 – 13 : Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
ASTM F2971 – 13 : Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
ASTM F2972 – 12 : Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System
ASTM F2974 – 13 : Standard Guide for Auditing Amusement Rides and Devices
ASTM F2975 – 12 : Standard Test Method for Measuring the Field Performance of Commercial Kitchen Ventilation Systems
ASTM F2976 – 13 : Standard Practice for Determining the Field Performance of Commercial Kitchen Demand Control Ventilation Systems
ASTM F2977 – 13 : Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
ASTM F2978 – 13 – Guide to Optimize Scan Sequences for Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging
ASTM F2979 – 14 : Standard Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and other Hard-on-Hard Hip Prostheses
ASTM F2980 – 13 : Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
ASTM F2982 – 13 : Standard Specification for Polyester Composition Floor Tile
ASTM F2983 – 13 : Standard Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats
ASTM F2984 – 13 : Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits
ASTM F2986 – 12 : Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
ASTM F2987 – 12 : Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications
ASTM F2988 – 12 : Standard Specification for Commercial Coffee Brewers
ASTM F2989 – 13 : Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications
ASTM F2990 – 12 : Standard Test Method for Commercial Coffee Brewers
ASTM F2991 – 13 : Standard Guide for Doubler Plate Repairs for Non-Classed Ship Structures
ASTM F2993 – 13 : Standard Guide for Monitoring Weather Conditions for Safe Parasail Operation
ASTM F2994 – 13 : Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems
ASTM F2995 – 13 : Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids
ASTM F2996 – 13 : Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems
ASTM F2997 – 13 : Standard Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis
ASTM F2998 – 14 – Guide for Using Fluorescence Microscopy to Quantify the Spread Area of Fixed Cells
ASTM F2999 – 13 : Standard Consumer Safety Specification for Adult Jewelry
ASTM F30 – 96(2012) : Standard Specification for Iron-Nickel Sealing Alloys
ASTM F3000 / F3000M – 13 : Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
ASTM F3001 – 14 : Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
ASTM F3002 – 14 : Standard Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS)
ASTM F3003 – 14 : Standard Specification for Quality Assurance of a Small Unmanned Aircraft System (sUAS)
ASTM F3004 – 13e1 : Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
ASTM F3005 – 14 : Standard Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS)
ASTM F3006 – 13 : Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
ASTM F3007 – 13 : Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
ASTM F3008 – 13 : Standard Specification for Cork Floor Tile
ASTM F3009 – 14 : Standard Specification for Polyolefin Composition Floor Tile
ASTM F3010 – 13 : Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
ASTM F3011 – 13 : Standard Specification for Performance of Angle of Attack System
ASTM F3012 – 14 : Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
ASTM F3013 – 13 : Standard Test Method for Density of Topsoil and Blended Soils In-place by the Core Displacement Method
ASTM F3014 – 14 : Standard Test Method for Penetration Testing of Needles Used in Surgical Sutures
ASTM F3015 – 13 : Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E
ASTM F302 – 09 : Standard Practice for Field Sampling of Aerospace Fluids in Containers
ASTM F3021 – 13 : Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
ASTM F3022 – 13 : Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
ASTM F3023 – 13 : Standard Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper Body Ergometers
ASTM F3024 – 13 : Standard Guide for Training of a Land Search and Rescue (SAR) Strike Team/Task Force Leader
ASTM F3027 – 13 : Standard Guide for Training of Personnel Operating in Mountainous Terrain (Mountain Endorsement)
ASTM F3028 – 13 : Standard Guide for Training of Search and Rescue Personnel Operating in the Alpine Environment (Alpine Endorsement)
ASTM F303 – 08 : Standard Practices for Sampling for Particles in Aerospace Fluids and Components
ASTM F3030 – 13 : Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts
ASTM F3034 – 13 : Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
ASTM F3035 – 13 : Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
ASTM F3036 – 13 : Standard Guide for Testing Absorbable Stents
ASTM F3038 – 14 : Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
ASTM F3039 – 13 : Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
ASTM F3040 / F3040M – 13 : Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads
ASTM F3041 – 14 : Standard Specification for Bonded Rubber Crumb Floor Coverings
ASTM F3042 – 13 : Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
ASTM F3044 – 14 – Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
ASTM F3046 – 13 : Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
ASTM F3048 – 13e1 : Standard Guide for Swiftwater/Flood Search and Rescue Operations
ASTM F3052 – 14 : Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft
ASTM F3055 – 14 : Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM F3056 – 14 : Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM F3057 – 14 : Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings
ASTM F3068 – 14 : Standard Guide for Contents and Use of a Position Task Book (PTB)
ASTM F3069 – 14 : Standard Guide for Requirements for Bodies that Operate Certification Programs in the Field of Search and Rescue
ASTM F307 – 13 : Standard Practice for Sampling Pressurized Gas for Gas Analysis
ASTM F3071 – 14 : Standard Guide for Basic Wilderness GPS/GNSS Use (GPS/GNSS-IW) Endorsement
ASTM F3072 – 14 : Standard Guide for Intermediate Wilderness GPS/GNSS Use (GPS/GNSS-IIW) Endorsement
ASTM F3085 – 14 : Standard Specification for Air Soft Gun Barrel Blocking Devices
ASTM F309 – 04(2010) : Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
ASTM F31 – 12 : Standard Specification for Nickel-Chromium-Iron Sealing Alloys
ASTM F310 – 07(2012) : Standard Practice for Sampling Cryogenic Aerospace Fluids
ASTM F311 – 08(2013) : Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM F312 – 08 : Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM F316 – 03(2011) : Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
ASTM F319 – 09 : Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
ASTM F320 – 10 : Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
ASTM F326 – 96(2012) : Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
ASTM F327 – 08 : Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
ASTM F330 – 10 : Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
ASTM F331 – 13 : Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
ASTM F335 – 03(2009) : Standard Terminology Relating to Electrostatic Copying
ASTM F336 – 02(2009) : Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
ASTM F34 – 13 : Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
ASTM F355 – 10a : Standard Test Method for Impact Attenuation of Playing Surface Systems and Materials
ASTM F36 – 99(2009) : Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM F360 – 82(2011) : Standard Practice for Image Evaluation of Electrostatic Business Copies
ASTM F362 / F362M – 91(2010)e1 : Standard Test Method for Determining the Erasability of Inked Ribbons
ASTM F363 – 99(2011) : Standard Test Method for Corrosion Testing of Gaskets
ASTM F364 – 96(2009) : Standard Specification for Molybdenum Flattened Wire for Electron Tubes
ASTM F366 – 10 : Standard Specification for Fixation Pins and Wires
ASTM F37 – 06(2013) : Standard Test Methods for Sealability of Gasket Materials
ASTM F373 – 13 : Standard Test Method for Embossed Depth of Resilient Floor Coverings
ASTM F375 – 89(2010) : Standard Specification for Integrated Circuit Lead Frame Material
ASTM F377 – 03(2009) : Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
ASTM F38 – 00(2014) : Standard Test Methods for Creep Relaxation of a Gasket Material
ASTM F381 – 14 : Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
ASTM F382 – 99(2008)e1 : Standard Specification and Test Method for Metallic Bone Plates
ASTM F384 – 12 : Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
ASTM F386 – 11 : Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM F387 – 11 : Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM F390 – 11 : Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
ASTM F392 / F392M – 11 : Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM F395 – 10 : Standard Terminology Relating to Vacuum Cleaners
ASTM F396 – 00(2009) : Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
ASTM F400 – 10 : Standard Consumer Safety Specification for Lighters
ASTM F402 – 05(2012) : Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
ASTM F404 – 14 : Standard Consumer Safety Specification for High Chairs
ASTM F405 – 13 : Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
ASTM F406 – 13 : Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
ASTM F408 – 99(2008) : Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
ASTM F409 – 12 : Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
ASTM F410 – 08(2013) : Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM F412 – 13 : Standard Terminology Relating to Plastic Piping Systems
ASTM F414 – 09 : Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
ASTM F415 – 87(2010) : Standard Test Method for Curl in Carbon Paper
ASTM F420 – 04(2009) : Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
ASTM F421 – 07(2013)e1 : Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
ASTM F428 – 09 : Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F429 – 10 : Standard Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football
ASTM F430 – 13 : Standard Specification for Paper Used for Vacuum Cleaner Filter Bags
ASTM F431 – 04(2013) : Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
ASTM F432 – 13 : Standard Specification for Roof and Rock Bolts and Accessories
ASTM F433 – 02(2009) : Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
ASTM F434 – 93(2009) : Standard Test Method for Blow-Out Testing of Preformed Gaskets
ASTM F436 – 11 : Standard Specification for Hardened Steel Washers
ASTM F436M – 11 : Standard Specification for Hardened Steel Washers [Metric]
ASTM F437 – 09 : Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM F438 – 09 : Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
ASTM F439 – 13 : Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM F44 – 95(2011) : Standard Specification for Metallized Surfaces on Ceramic
ASTM F441 / F441M – 13e1 : Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
ASTM F442 / F442M – 13e1 : Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
ASTM F444 – 88(2009) : Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
ASTM F445 – 88(2009) – Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
ASTM F446 – 85(2009) : Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
ASTM F448 – 11 – Test Method for Measuring Steady-State Primary Photocurrent
ASTM F449 – 02(2008) : Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM F450 – 13 : Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)
ASTM F451 – 08 : Standard Specification for Acrylic Bone Cement
ASTM F452 – 76(2008) : Standard Specification for Preformed Cranioplasty Plates
ASTM F457 – 04(2010) : Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
ASTM F458 – 13 : Standard Practice for Nondestructive Pull Testing of Wire Bonds1,2
ASTM F459 – 13 : Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
ASTM F462 – 79(2007) : Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities
ASTM F467 – 13e2 : Standard Specification for Nonferrous Nuts for General Use
ASTM F467M – 06a(2012) : Standard Specification for Nonferrous Nuts for General Use (Metric)
ASTM F468 – 12 : Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM F468M – 06(2012) : Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
ASTM F470 – 89(2009) : Standard Practice for Caking Temperature of Dry Electrostatic Toner
ASTM F472 – 11 : Standard Terminology for Geometry of Alpine Skis
ASTM F473 – 09 : Standard Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings
ASTM F476 – 14 : Standard Test Methods for Security of Swinging Door Assemblies
ASTM F477 – 10 : Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F478 – 14 : Standard Specification for In-Service Care of Insulating Line Hose and Covers
ASTM F479 – 06(2011) : Standard Specification for In-Service Care of Insulating Blankets
ASTM F480 – 14 : Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
ASTM F481 – 97(2008) : Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
ASTM F482 – 09 : Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
ASTM F483 – 09 : Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
ASTM F484 – 08(2013) : Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
ASTM F485 – 08(2013) : Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
ASTM F486 – 01(2011) : Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners
ASTM F487 – 13 : Standard Specification for Fine Aluminum–1?% Silicon Wire for Semiconductor Lead-Bonding
ASTM F493 – 10 : Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
ASTM F494 – 05(2011) : Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F495 – 99a(2011) : Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
ASTM F496 – 14 : Standard Specification for In-Service Care of Insulating Gloves and Sleeves
ASTM F497 – 00(2009) : Standard Practice for Use of the Electric and Electronic Typewriter as a Test Instrument
ASTM F498 – 12 : Standard Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
ASTM F50 – 12 : Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM F502 – 08(2013) : Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
ASTM F504 – 05(2012) : Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
ASTM F505 – 87(2011) : Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners
ASTM F509 – 86(2009) : Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes
ASTM F51 / F51M – 00(2014)e1 : Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F510 / F510M – 14 : Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
ASTM F511 – 11 : Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
ASTM F512 – 12 : Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
ASTM F513 – 12 : Standard Specification for Eye and Face Protective Equipment for Hockey Players
ASTM F519 – 13 : Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
ASTM F520 – 10 : Standard Test Method for Environmental Resistance of Aerospace Transparencies
ASTM F521 – 83(2010) : Standard Test Methods for Bond Integrity of Transparent Laminates
ASTM F526 – 11 : Standard Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests
ASTM F537 – 01(2007) : Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
ASTM F538 – 13 : Standard Terminology Relating to the Characteristics and Performance of Tires
ASTM F539 – 01(2011) : Standard Practice for Fitting Athletic Footwear
ASTM F541 – 12 : Standard Specification for Alloy Steel Eyebolts
ASTM F543 – 13e1 : Standard Specification and Test Methods for Metallic Medical Bone Screws
ASTM F547 – 06(2012) : Standard Terminology of Nails for Use with Wood and Wood-Base Materials
ASTM F548 – 09 : Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F549 – 85(2011) : Standard Terminology Relating to Carbonless Copy Products
ASTM F551 / F551M – 09a : Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
ASTM F552 – 02(2013) : Standard Terminology Relating to Chain Link Fencing
ASTM F555 – 01(2011) : Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
ASTM F556 – 88(2011) : Standard Test Method for Curl of Carbonless Copy Papers
ASTM F558 – 13 : Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F559 – 05(2010) : Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
ASTM F560 – 13e1 : Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
ASTM F561 – 13 : Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM F562 – 13 : Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
ASTM F564 – 10 : Standard Specification and Test Methods for Metallic Bone Staples
ASTM F565 – 04(2013) : Standard Practice for Care and Handling of Orthopedic Implants and Instruments
ASTM F567 – 14 : Standard Practice for Installation of Chain-Link Fence
ASTM F571 – 87(2008) : Standard Practice for Installation of Exit Devices in Security Areas
ASTM F577 – 03(2009) : Standard Test Method for Particle Size Measurement of Dry Toners
ASTM F584 – 06e1 : Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM F585 – 13 : Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
ASTM F588 – 14 : Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
ASTM F589 – 12 : Standard Consumer Safety Specification for Non-Powder Guns
ASTM F590 – 12 : Standard Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
ASTM F592 – 84(2012) : Standard Terminology of Collated and Cohered Fasteners and Their Application Tools
ASTM F593 – 13a : Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
ASTM F594 – 09e1 : Standard Specification for Stainless Steel Nuts
ASTM F596 – 09 : Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
ASTM F597 – 83(2008) : Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter
ASTM F598 – 00(2009) : Standard Practice for Determining the Resistance of Carbonless Papers to Capsular Damage
ASTM F601 – 13 : Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
ASTM F602 – 09 : Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM F603 – 12 : Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application
ASTM F605 – 88(2011) : Standard Practice for Determining Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set
ASTM F606 – 13 : Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F606M – 13a : Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)
ASTM F607 – 03(2008) : Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
ASTM F608 – 13 : Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
ASTM F609 – 05(2013) : Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM F610 / F610M – 10 : Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
ASTM F615M – 95(2013) : Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)
ASTM F619 – 14 : Standard Practice for Extraction of Medical Plastics
ASTM F620 – 11 : Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition
ASTM F621 – 12 : Standard Specification for Stainless Steel Forgings for Surgical Implants
ASTM F623 – 99(2013) : Standard Performance Specification for Foley Catheter
ASTM F624 – 09 : Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
ASTM F625 / F625M – 94(2011)e2 : Standard Practice for Classifying Water Bodies for Spill Control Systems
ASTM F626 – 14 : Standard Specification for Fence Fittings
ASTM F627 – 99(2008) : Standard Practice for Testing Flake of Single-Strike Film Typewriter Ribbons
ASTM F628 – 12e1 : Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
ASTM F629 – 11 : Standard Practice for Radiography of Cast Metallic Surgical Implants
ASTM F631 – 99(2008) : Standard Guide for Collecting Skimmer Performance Data in Controlled Environments
ASTM F639 – 09 : Standard Specification for Polyethylene Plastics for Medical Applications
ASTM F640 – 12 : Standard Test Methods for Determining Radiopacity for Medical Use
ASTM F641 – 09 : Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM F645 – 13 : Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM F647 – 94(2006) : Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application
ASTM F648 – 14 : Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F654 – 07(2012) : Standard Specification for Residential Chain Link Fence Gates
ASTM F655 – 13 : Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing
ASTM F656 – 10 : Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
ASTM F659 – 10 : Standard Specification for Ski and Snowboard Goggles
ASTM F660 – 83(2013) : Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
ASTM F665 – 09 : Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
ASTM F667 – 12 : Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
ASTM F668 – 11 : Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
ASTM F67 – 13 : Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
ASTM F670 – 02(2012) : Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
ASTM F679 – 13a : Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F68 – 10 : Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
ASTM F680 – 80(2012) : Standard Test Methods for Nails
ASTM F681 – 82(2008) : Standard Practice for Use of Branch Connections
ASTM F682 – 82a(2008) : Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ASTM F683 – 10 : Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
ASTM F685 – 96(2011) : Standard Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems
ASTM F686 – 94(2011) : Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter
ASTM F688 – 10 : Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
ASTM F689 – 97(2011) : Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
ASTM F693 – 01(2012) : Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
ASTM F695 – 01(2009) : Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
ASTM F696 – 06(2011) : Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
ASTM F697 – 00(2006) : Standard Practice for Care and Use of Athletic Mouth Protectors
ASTM F7 – 95(2011) : Standard Specification for Aluminum Oxide Powder
ASTM F700 – 93(2008) : Standard Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments
ASTM F701 – 81(2008) : Standard Practice for Care and Handling of Neurosurgical Implants and Instruments
ASTM F702 – 10 : Standard Specification for Polysulfone Resin for Medical Applications
ASTM F703 – 07 : Standard Specification for Implantable Breast Prostheses
ASTM F704 – 81(2009) : Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
ASTM F706 – 96(2011) : Standard Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners
ASTM F707 / F707M – 94(2011) : Standard Specification for Modular Gage Boards
ASTM F708 – 92(2008) : Standard Practice for Design and Installation of Rigid Pipe Hangers
ASTM F710 – 11 : Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
ASTM F711 – 02(2013) : Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools?
ASTM F712 – 06(2011) : Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
ASTM F714 – 13 : Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
ASTM F715 – 07(2012) : Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
ASTM F716 – 09 : Standard Test Methods for Sorbent Performance of Absorbents
ASTM F717 – 10 : Standard Specification for Football Helmets
ASTM F718 – 07(2011)e1 : Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
ASTM F719 – 81(2012) : Standard Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation
ASTM F72 – 06 : Standard Specification for Gold Wire for Semiconductor Lead Bonding
ASTM F720 – 13 : Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test
ASTM F721 – 81(2008) : Standard Specification for Gage Piping Assemblies
ASTM F722 – 82(2008) : Standard Specification for Welded Joints for Shipboard Piping Systems
ASTM F724 – 94a(2010)e1 : Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
ASTM F725 – 03(2013) : Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
ASTM F726 – 12 : Standard Test Method for Sorbent Performance of Adsorbents
ASTM F73 – 96(2013) : Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
ASTM F732 – 00(2011) : Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
ASTM F733 – 09 : Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F734 – 95(2011) : Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
ASTM F735 – 11 : Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM F736 – 95(2011) : Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM F738M – 02(2008) : Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
ASTM F739 – 12 : Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
ASTM F744M – 10 : Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits [Metric]
ASTM F746 – 04(2009)e1 : Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
ASTM F747 – 06 : Standard Terminology Relating to Amusement Rides and Devices
ASTM F748 – 06(2010) : Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM F749 – 13 : Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit
ASTM F75 – 12 : Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
ASTM F750 – 87(2012) : Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse
ASTM F754 – 08 : Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders
ASTM F755 – 99(2011) : Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
ASTM F756 – 13 : Standard Practice for Assessment of Hemolytic Properties of Materials
ASTM F758 – 95(2007)e1 : Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
ASTM F76 – 08 : Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM F760 – 93(2012) : Standard Specification for Food Service Equipment Manuals
ASTM F762 / F762M – 08 : Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
ASTM F763 – 04(2010) : Standard Practice for Short-Term Screening of Implant Materials
ASTM F765 – 93(2012)e1 : Standard Specification for Wildcats, Ship Anchor Chain
ASTM F766 / F766M – 82(2010)e1 : Standard Test Method for Melting Point of Waxes
ASTM F767 – 98(2013) : Standard Test Method for Image Stability of Chemical Carbonless Paper to Light
ASTM F770 – 14 : Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
ASTM F773M – 10 – Practice for Measuring Dose Rate Response of Linear Integrated Circuits [Metric]
ASTM F778 – 88(2014) : Standard Methods for Gas Flow Resistance Testing of Filtration Media
ASTM F779 – 12 : Standard Test Method for Torsion Characteristic of Alpine Skis
ASTM F780 – 93a(2012) : Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis
ASTM F782 – 01(2012) : Standard Specification for Doors, Furniture, Marine
ASTM F783 – 88(2013) : Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung
ASTM F788 – 13 : Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
ASTM F79 – 69(2010) : Standard Specification for Type 101 Sealing Glass
ASTM F790 – 08(2013) : Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM F791 – 96(2013) : Standard Test Method for Stress Crazing of Transparent Plastics
ASTM F792 – 08 : Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM F793 – 10a : Standard Classification of Wall Covering by Use Characteristics
ASTM F794 – 03(2009) : Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM F799 – 11 : Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
ASTM F801 – 96(2008) : Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F803 – 11 : Standard Specification for Eye Protectors For Selected Sports
ASTM F806 – 99a(2009) : Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM F807 – 83(2009) : Standard Practice for Determining Resolution Capability of Office Copiers
ASTM F810 – 12 : Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
ASTM F811 – 02(2010) : Standard Practice for Accelerometer Use in Vehicles for Tire Testing
ASTM F812 – 12 : Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
ASTM F813 – 07(2012) : Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
ASTM F818 – 93(2009) : Standard Terminology Relating to Spill Response Barriers
ASTM F819 – 10 : Standard Terminology Relating to Electrical Protective Equipment for Workers
ASTM F820 – 11 : Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
ASTM F821 / F821M – 01(2012) : Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
ASTM F822 – 93(2010) : Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
ASTM F823 – 93(2010) : Standard Specification for Desk, Log, Marine, Steel, with Cabinet
ASTM F824 – 93(2010) : Standard Specification for Tables, Mess, Marine, Steel
ASTM F825 – 93(2010) : Standard Specification for Drawers, Furniture, Marine, Steel
ASTM F826 – 94(2010) : Standard Specification for Tops, Furniture, Marine, Steel
ASTM F83 – 71(2013) : Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters
ASTM F832 – 90(2008) : Standard Classification for Security Seals
ASTM F833 – 13b : Standard Consumer Safety Performance Specification for Carriages and Strollers
ASTM F834 – 84(2008) : Standard Consumer Safety Specification for Toy Chests
ASTM F835 – 13 : Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F835M – 11 : Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
ASTM F836M – 02(2010) : Standard Specification for Style 1 Stainless Steel Metric Nuts
ASTM F837 – 13e1 : Standard Specification for Stainless Steel Socket Head Cap Screws
ASTM F837M – 02a(2010) : Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
ASTM F838 – 05(2013) : Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
ASTM F839 – 83(2006) : Standard Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use
ASTM F841 – 84(2011) : Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels
ASTM F842 – 14 : Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
ASTM F843 – 98(2008) : Standard Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink
ASTM F844 – 07a(2013) : Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
ASTM F85 – 76(2013) : Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
ASTM F851 – 87(2013) : Standard Test Method for Self-Rising Seat Mechanisms
ASTM F852 – 08 : Standard Specification for Portable Gasoline Containers for Consumer Use
ASTM F853 – 05 : Standard Practice for Maintenance Procedures for Amusement Rides and Devices
ASTM F854 – 83(2008) : Standard Test Method for Cleanliness of Carbon Paper
ASTM F855 – 09 : Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
ASTM F856 – 97(2008) : Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)
ASTM F857 – 12 : Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
ASTM F858 – 07R13e1 : Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type
ASTM F859 – 09 : Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type
ASTM F86 – 13 : Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
ASTM F860 – 07(2013) : Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
ASTM F861 – 94(2008)e1 : Standard Specification for Commercial Dishwashing Racks
ASTM F862 – 11 : Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM F868 – 02(2009) : Standard Classification for Laminated Composite Gasket Materials
ASTM F870 – 94(2010) : Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM F874 – 98(2014) : Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
ASTM F875 – 09 : Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F876 – 13a : Standard Specification for Crosslinked Polyethylene (PEX) Tubing
ASTM F877 – 11a : Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
ASTM F879 – 12 : Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F879M – 02a(2008) : Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
ASTM F88 / F88M – 09 : Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F880 – 12 : Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
ASTM F880M – 02(2008) : Standard Specification for Stainless Steel Socket Set Screws (Metric)
ASTM F881 – 94(2006) : Standard Specification for Silicone Elastomer Facial Implants
ASTM F883 – 13 : Standard Performance Specification for Padlocks
ASTM F884 – 01(2011) : Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
ASTM F885 – 84(2011) : Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2
ASTM F887 – 13 : Standard Specifications for Personal Climbing Equipment
ASTM F888 – 06(2011) : Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
ASTM F891 – 10 : Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM F894 – 13 : Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM F895 – 11 : Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
ASTM F897 – 02(2013) : Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
ASTM F899 – 12b : Standard Specification for Wrought Stainless Steels for Surgical Instruments
ASTM F90 – 09 : Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
ASTM F900 – 11 : Standard Specification for Industrial and Commercial Swing Gates
ASTM F901 – 01(2012) : Standard Specification for Aluminum Transmission Tower Bolts and Nuts
ASTM F903 – 10 : Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
ASTM F904 – 98(2008) : Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM F905 – 04(2011) : Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
ASTM F906 – 85(2014) : Standard Specification for Letters and Numerals for Ships
ASTM F909 – 94a(2011) : Standard Terminology Relating to Printers
ASTM F91 – 06(2011) : Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
ASTM F910 – 04(2010) : Standard Specification for Face Guards for Youth Baseball
ASTM F912 – 11 : Standard Specification for Alloy Steel Socket Set Screws
ASTM F912M – 11 : Standard Specification for Alloy Steel Socket Set Screws (Metric)
ASTM F913 – 02(2014) : Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F914 / F914M – 14 : Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
ASTM F917 – 91(2008)e1 : Standard Specification for Commercial Food Waste Disposers
ASTM F918 – 09 : Standard Specification for Noncarbonated Mechanically Refrigerated, Beverage Dispenser (Visible Product)
ASTM F919 – 10 : Standard Specification for Slicing Machines, Food, Electric
ASTM F92 – 93(2008) : Standard Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons
ASTM F921 – 10(2011) : Standard Terminology Relating to Hemostatic Forceps
ASTM F922 – 01(2011) : Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
ASTM F924 – 90(2009) : Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
ASTM F925 – 13 : Standard Test Method for Resistance to Chemicals of Resilient Flooring
ASTM F934 – 96(2013) : Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
ASTM F935 – 00(2009) : Standard Test Method for Comparing Cover-Up Correction Media
ASTM F939 – 12 : Standard Practice for Selection of Release Torque Values for Alpine Ski Bindings
ASTM F940 – 99(2013) : Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
ASTM F941 – 99(2013) : Standard Practice for Inspection of Marine Surface Preparation and Coating Application
ASTM F942 – 02(2013) : Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM F945 – 12 : Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM F946 – 85(2010) : Standard Guide for Establishing Security Seal Control and Accountability Procedures
ASTM F948 – 94(2011) : Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F949 – 10 : Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
ASTM F952 – 12 : Standard Specification for Mixing Machines, Food, Electric
ASTM F953 – 08 : Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
ASTM F955 – 07 : Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM F956 – 91(2012) : Standard Specification for Bell, Cast, Sound Signalling
ASTM F957 – 91(2012) : Standard Specification for Gong, Sound Signaling
ASTM F959 – 13 : Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
ASTM F959M – 13 : Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)
ASTM F96 – 77(2010) : Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
ASTM F961 – 08 : Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
ASTM F962 – 04(2010) : Standard Specification for Oil Spill Response Boom Connection: Z-Connector
ASTM F963 – 11 : Standard Consumer Safety Specification for Toy Safety
ASTM F964 – 13 : Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
ASTM F967 – 03(2011) : Standard Practice for Security Engineering Symbols
ASTM F969 – 11 : Standard Practice for Construction of Chain-Link Tennis Court Fence
ASTM F970 – 07(2011) : Standard Test Method for Static Load Limit
ASTM F974 – 06(2011)e1 : Standard Practice for Determination of Color Response of Electrostatic Copying System, Black and White Output
ASTM F976 – 08 : Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use
ASTM F977 – 12 : Standard Consumer Safety Specification for Infant Walkers
ASTM F980 – 10 : Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices
ASTM F981 – 04(2010) : Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
ASTM F982 – 86(2008) : Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion
ASTM F983 – 86(2013) : Standard Practice for Permanent Marking of Orthopaedic Implant Components
ASTM F985 – 00(2012) : Standard Specification for Panama Canal Pilot Platform
ASTM F986 – 86(2008) : Standard Specification for Suction Strainer Boxes
ASTM F987 – 04(2010) : Standard Specification for Portable Intermediate Flush Deck Stanchion
ASTM F99 – 07(2011) : Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
ASTM F992 – 86(2011) : Standard Specification for Valve Label Plates
ASTM F993 – 86(2011) : Standard Specification for Valve Locking Devices
ASTM F994 – 86(2011) : Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections
ASTM F995 – 09 : Standard Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer
ASTM F996 – 11 : Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics
ASTM F997 – 10 : Standard Specification for Polycarbonate Resin for Medical Applications
ASTM F998 – 12 : Standard Specification for Centrifugal Pump, Shipboard Use
ASTM G1 – 03(2011) : Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM G10 – 10 : Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM G100 – 89(2010)e1 : Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G101 – 04(2010) : Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
ASTM G102 – 89(2010) : Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM G103 – 97(2011) : Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
ASTM G105 – 02(2007) : Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM G106 – 89(2010) : Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
ASTM G107 – 95(2008) : Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
ASTM G108 – 94(2010) : Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
ASTM G109 – 07(2013) : Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM G11 – 04(2012) : Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
ASTM G110 – 92(2009) : Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
ASTM G111 – 97(2013) : Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
ASTM G112 – 92(2009) : Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
ASTM G113 – 14 : Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G114 – 07 : Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
ASTM G115 – 10(2013) : Standard Guide for Measuring and Reporting Friction Coefficients
ASTM G116 – 99(2010) : Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM G117 – 13 : Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM G118 – 02(2007) : Standard Guide for Recommended Format of Wear Test Data Suitable for Databases
ASTM G119 – 09 : Standard Guide for Determining Synergism Between Wear and Corrosion
ASTM G12 – 07(2013) : Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
ASTM G120 – 01(2008) : Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction
ASTM G121 – 98(2010)e1 : Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G122 – 96(2008) : Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM G123 – 00(2011) : Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM G124 – 10 : Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
ASTM G125 – 00(2008) : Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G126 – 00(2008) : Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
ASTM G127 – 95(2008) : Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
ASTM G128 – 02(2008) : Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
ASTM G129 – 00(2013) : Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
ASTM G13 / G13M – 13 : Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
ASTM G130 – 12 : Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G131 – 96(2008) : Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
ASTM G132 – 96(2013) : Standard Test Method for Pin Abrasion Testing
ASTM G133 – 05(2010) : Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G134 – 95(2010)e1 : Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
ASTM G135 – 95(2013) : Standard Guide for Computerized Exchange of Corrosion Data for Metals
ASTM G136 – 03(2009) : Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
ASTM G137 – 97(2009) : Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
ASTM G138 – 12 : Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM G139 – 05(2011) : Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM G14 – 04(2010)e1 : Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G140 – 02(2008) : Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM G141 – 09(2013) : Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM G142 – 98(2011) : Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM G143 – 03(2013) : Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM G144 – 01(2014) : Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G145 – 08 : Standard Guide for Studying Fire Incidents in Oxygen Systems
ASTM G146 – 01(2013) : Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
ASTM G147 – 09 : Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM G148 – 97(2011) : Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
ASTM G150 – 13 : Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
ASTM G151 – 10 : Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G152 – 13 : Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153 – 13 : Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G154 – 12a : Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM G155 – 13 : Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G156 – 09 : Standard Practice for Selecting and Characterizing Weathering Reference Materials
ASTM G157 – 98(2013) : Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
ASTM G158 – 98(2010) : Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM G16 – 13 : Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM G160 – 12 : Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
ASTM G161 – 00(2013) : Standard Guide for Corrosion-Related Failure Analysis
ASTM G162 – 99(2010) : Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
ASTM G163 – 10 : Standard Guide for Digital Data Acquisition in Wear and Friction Measurements
ASTM G164 – 99(2013) : Standard Test Method for Determination of Surface Lubrication on Flexible Webs
ASTM G165 – 99(2012) : Standard Practice for Determining Rail-to-Earth Resistance
ASTM G166 – 00(2011) : Standard Guide for Statistical Analysis of Service Life Data
ASTM G167 – 05(2010) : Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
ASTM G168 – 00(2013) : Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASTM G169 – 01(2013) : Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM G17 – 07(2013) : Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
ASTM G170 – 06(2012) : Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM G171 – 03(2009)e2 : Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G172 – 02(2010)e1 : Standard Guide for Statistical Analysis of Accelerated Service Life Data
ASTM G173 – 03(2012) : Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
ASTM G174 – 04(2009)e1 : Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM G175 – 13 : Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications
ASTM G176 – 03(2009) : Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM G177 – 03(2012) : Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
ASTM G178 – 09 : Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM G179 – 04(2011) : Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
ASTM G18 – 07(2013) : Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
ASTM G180 – 13 : Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
ASTM G181 – 11 : Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM G182 – 13 : Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
ASTM G183 – 05(2010) : Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM G184 – 06(2012) : Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM G185 – 06(2012) : Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G186 – 05(2011) : Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
ASTM G187 – 12a : Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G188 – 05(2011) : Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
ASTM G189 – 07(2013) : Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM G190 – 06 : Standard Guide for Developing and Selecting Wear Tests
ASTM G192 – 08 : Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G194 – 08(2013) : Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
ASTM G195 – 13a : Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G196 – 08 : Standard Test Method for Galling Resistance of Material Couples
ASTM G197 – 08(2012) : Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
ASTM G198 – 11 : Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
ASTM G199 – 09(2014) : Standard Guide for Electrochemical Noise Measurement
ASTM G2 / G2M – 06(2011)e1 : Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
ASTM G20 – 10 : Standard Test Method for Chemical Resistance of Pipeline Coatings
ASTM G200 – 09(2014) : Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
ASTM G201 – 09 : Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
ASTM G202 – 12 : Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G203 – 10 : Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
ASTM G204 – 10 : Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM G205 – 10 : Standard Guide for Determining Corrosivity of Crude Oils
ASTM G206 – 11 : Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM G207 – 11 : Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
ASTM G208 – 12 : Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
ASTM G209 – 13 : Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
ASTM G21 – 13 : Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM G210 – 13 : Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
ASTM G24 – 13 : Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
ASTM G28 – 02(2008) : Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
ASTM G29 – 96(2010) : Standard Practice for Determining Algal Resistance of Plastic Films
ASTM G3 – 13 : Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM G30 – 97(2009) : Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
ASTM G32 – 10 : Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM G33 – 99(2010) : Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G34 – 01(2013) : Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G35 – 98(2010) : Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
ASTM G36 – 94(2013) : Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
ASTM G37 – 98(2011) : Standard Practice for Use of Mattsson’s Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
ASTM G38 – 01(2013) : Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM G39 – 99(2011) : Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM G4 – 01(2008) : Standard Guide for Conducting Corrosion Tests in Field Applications
ASTM G40 – 13 : Standard Terminology Relating to Wear and Erosion
ASTM G41 – 90(2013) : Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
ASTM G42 – 11 : Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
ASTM G44 – 99(2013) : Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5?% Sodium Chloride Solution
ASTM G46 – 94(2013) : Standard Guide for Examination and Evaluation of Pitting Corrosion
ASTM G47 – 98(2011) : Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G48 – 11 – : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G49 – 85(2011) : Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G5 – 13e2 : Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G50 – 10 : Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM G51 – 95(2012) : Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM G52 – 00(2011) : Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G55 – 07(2013) : Standard Test Method for Evaluating Pipeline Coating Patch Materials
ASTM G56 – 10 : Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
ASTM G57 – 06(2012) : Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G58 – 85(2011) : Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
ASTM G59 – 97(2014) : Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G6 – 07(2013) : Standard Test Method for Abrasion Resistance of Pipeline Coatings
ASTM G60 – 01(2013) : Standard Practice for Conducting Cyclic Humidity Exposures
ASTM G61 – 86(2014) : Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
ASTM G62 – 07(2013) : Standard Test Methods for Holiday Detection in Pipeline Coatings
ASTM G63 – 99(2007) : Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
ASTM G64 – 99(2013) : Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
ASTM G65 – 04(2010) : Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM G66 – 99(2013) : Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM G67 – 13 : Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM G69 – 12 : Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G7 / G7M – 13 : Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
ASTM G71 – 81(2014) : Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G72 / G72M – 09 : Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM G73 – 10 : Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM G74 – 13 : Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
ASTM G75 – 07(2013) : Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM G76 – 13 : Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM G77 – 05(2010) : Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G78 – 01(2012) : Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
ASTM G8 – 96(2010) : Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
ASTM G81 – 97a(2013) : Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G82 – 98(2014) : Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
ASTM G84 – 89(2012) : Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM G85 – 11 : Standard Practice for Modified Salt Spray (Fog) Testing
ASTM G86 – 98a(2011) : Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
ASTM G87 – 02(2013) : Standard Practice for Conducting Moist SO2 Tests
ASTM G88 – 13 : Standard Guide for Designing Systems for Oxygen Service
ASTM G9 – 07(2013)e1 : Standard Test Method for Water Penetration into Pipeline Coatings
ASTM G90 – 10 : Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
ASTM G91 – 11 : Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
ASTM G92 – 86(2010) : Standard Practice for Characterization of Atmospheric Test Sites
ASTM G93 – 03(2011) : Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
ASTM G94 – 05(2014) : Standard Guide for Evaluating Metals for Oxygen Service
ASTM G95 – 07(2013) : Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
ASTM G96 – 90(2013) : Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
ASTM G97 – 97(2013) : Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM G98 – 02(2009) : Standard Test Method for Galling Resistance of Materials
ASTM G99 – 05(2010) : Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com