ASTM Standard And Specification – Page 3

ASTM D5678 – 95(2008) : Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
ASTM D5679 – 95a(2012) : Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM D5680 – 14 : Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM D5681 – 13 : Standard Terminology for Waste and Waste Management
ASTM D5682 – 08(2012) : Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
ASTM D5683 / D5683M – 95(2011)e1 : Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
ASTM D5684 – 12 : Standard Terminology Relating to Pile Floor Coverings
ASTM D5685 – 11 : Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D5687 / D5687M – 95(2007) : Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
ASTM D570 – 98(2010)e1 : Standard Test Method for Water Absorption of Plastics
ASTM D5702 – 07(2012) : Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
ASTM D5703 – 95(2013) : Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry
ASTM D5704 – 14 : Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
ASTM D5705 – 13 : Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
ASTM D5706 – 11 : Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D5707 – 11 : Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D5708 – 12 : Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D5709 – 09 : Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM D5710 / D5710M – 13 : Standard Specification for Trinidad Lake Modified Asphalt
ASTM D5712 – 10 : Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method
ASTM D5713 – 14 : Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
ASTM D5715 – 00(2006) : Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
ASTM D5716 – 95(2006) : Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
ASTM D5718 – 13 : Standard Guide for Documenting a Groundwater Flow Model Application
ASTM D5719 – 13 : Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
ASTM D572 – 04(2010) : Standard Test Method for Rubber-Deterioration by Heat and Oxygen
ASTM D5720 – 95(2009) : Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes
ASTM D5721 – 08(2013) : Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
ASTM D5722 – 08 : Standard Practice for Performing Accelerated Outdoor Weathering of Factory- Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
ASTM D5723 – 95(2010) : Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D5724 – 06(2010) : Standard Specification for Gouache Paints
ASTM D5726 – 98(2013) : Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
ASTM D5727 / D5727M – 00(2011)e1 : Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
ASTM D5728 – 12 : Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
ASTM D573 – 04(2010) : Standard Test Method for Rubber—Deterioration in an Air Oven
ASTM D5731 – 08 : Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM D5737 – 95(2006) : Standard Guide for Methods for Measuring Well Discharge
ASTM D5738 – 95(2006) : Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements – Diagrams for Single Analyses
ASTM D5739 – 06(2013) : Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
ASTM D5740 – 11 : Standard Guide for Writing Material Standards in the Classification D4000 Format
ASTM D5741 – 96(2011) : Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
ASTM D5742 – 95(2010) : Standard Test Method for Determination of Butane Activity of Activated Carbon
ASTM D5743 – 97(2013) : Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
ASTM D5744 – 13e1 : Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5745 – 09 : Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
ASTM D5746 – 98(2010) : Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
ASTM D5747 / D5747M – 08(2013)e1 : Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM D5748 – 95(2012) : Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
ASTM D5749 – 01(2012) : Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
ASTM D575 – 91(2012) : Standard Test Methods for Rubber Properties in Compression
ASTM D5750 / D5750M – 95(2012) : Standard Guide for Width and Length of Pressure-Sensitive Tape
ASTM D5751 – 99(2012) : Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM D5752 – 10 : Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
ASTM D5753 – 05(2010) : Standard Guide for Planning and Conducting Borehole Geophysical Logging
ASTM D5754 – 95(2006) : Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements – Trilinear Diagrams for Two or More Analyses
ASTM D5755 – 09 : Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM D5756 – 02(2008) : Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading
ASTM D5757 – 11 : Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM D5758 – 01(2011)e1 : Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM D5759 – 12 : Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ASTM D5760 – 13 : Standard Specification for Performance of Manual Transmission Gear Lubricants
ASTM D5761 – 96(2012) : Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
ASTM D5762 – 12 : Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D5763 – 11 : Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
ASTM D5764 – 97a(2013) : Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
ASTM D5765 – 05(2010) : Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
ASTM D5766 / D5766M – 11 : Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D5767 – 95(2012) : Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM D5768 – 02(2010) : Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM D5769 – 10 : Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
ASTM D5770 – 11 : Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM D5771 – 12 : Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D5772 – 10 : Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D5773 – 10 : Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D5774 – 95(2009) : Standard Test Methods for Rubber-Chemical Analysis of Extractables
ASTM D5775 – 95(2009)e1 : Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
ASTM D5776 – 14 : Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM D5777 – 00(2011)e1 : Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
ASTM D5778 – 12 : Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM D5779 / D5779M – 14 : Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control
ASTM D578 / D578M – 05(2011)e1 : Standard Specification for Glass Fiber Strands
ASTM D5780 – 10 : Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
ASTM D5781 / D5781M – 13 : Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5782 – 95(2012) : Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5783 – 95(2012) : Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5784 / D5784M – 13 : Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5785 – 95(2013) : Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
ASTM D5786 – 95(2012) : Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
ASTM D5787 – 95(2009) : Standard Practice for Monitoring Well Protection
ASTM D5788 – 95(2011) : Standard Guide for Spiking Organics into Aqueous Samples
ASTM D579 / D579M – 10 : Standard Specification for Greige Woven Glass Fabrics
ASTM D5790 – 95(2012) : Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM D5791 – 95(2012)e1 : Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
ASTM D5792 – 10 : Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM D5793 – 13 : Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
ASTM D5794 – 95(2008) : Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
ASTM D5795 – 95(2008) : Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via “Cobb Ring” Apparatus
ASTM D5796 – 10 : Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D5797 – 13 : Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
ASTM D5798 – 13a : Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D5799 – 95(2009) : Standard Test Method for Determination of Peroxides in Butadiene
ASTM D580 / D580M – 10 : Standard Specification for Greige Woven Glass Tapes and Webbings
ASTM D5800 – 10 : Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D5801 – 12 : Standard Test Method for Toughness and Tenacity of Bituminous Materials
ASTM D5805 – 00(2009) : Standard Test Method for Rubber from Synthetic Sources–Carbon Black in Masterbatches
ASTM D5806 – 95(2009) : Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
ASTM D5807 – 08(2013) : Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
ASTM D5808 – 09a(2014) : Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
ASTM D581 / D581M – 12 : Standard Specification for Glass Fiber Greige Braided Tubular Sleeving
ASTM D5810 – 96(2011) : Standard Guide for Spiking into Aqueous Samples
ASTM D5811 – 08(2013) : Standard Test Method for Strontium-90 in Water
ASTM D5813 – 04(2012) : Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5814 – 10 : Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
ASTM D5817 – 03a(2008) : Standard Practice for Carbon Black, Pelleted – Reduction, Blending, and Drying of Gross Samples for Testing
ASTM D5818 – 11 : Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
ASTM D5819 – 05(2012) : Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5820 – 95(2011) : Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
ASTM D5821 – 13 : Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D5822 – 13 : Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
ASTM D5823 – 13 : Standard Test Method for Tuft Height of Pile Floor Coverings
ASTM D5824 – 98(2011) : Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D5827 – 09e1 : Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D5828 – 97(2011)e1 : Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
ASTM D5829 – 96(2007) : Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories
ASTM D5830 – 14 : Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
ASTM D5831 – 09 : Standard Test Method for Screening Fuels in Soils
ASTM D5832 – 98(2008) : Standard Test Method for Volatile Matter Content of Activated Carbon Samples
ASTM D5833 – 12 : Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans
ASTM D5835 – 95(2013) : Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5836 – 08(2013) : Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
ASTM D5837 – 12 : Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
ASTM D5839 – 96(2006) : Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D584 – 10 : Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
ASTM D5842 – 14 : Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
ASTM D5843 – 95(2006) : Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
ASTM D5845 – 01(2011) : Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
ASTM D5846 – 07(2012) : Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
ASTM D5847 – 02(2012) : Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D5848 – 10e1 : Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5849 / D5849M – 07(2013)e1 : Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
ASTM D5850 – 95(2012) : Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM D5851 – 95(2011) : Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM D5852 – 00(2007) : Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
ASTM D5853 – 11 : Standard Test Method for Pour Point of Crude Oils
ASTM D5854 – 96(2010) : Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D5855 – 95(2013) : Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
ASTM D5856 – 95(2007) : Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5857 – 14 : Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
ASTM D5858 – 96(2008) : Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM D5860 – 95(2013) : Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D5861 – 07(2013) : Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM D5863 – 00a(2011) : Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D5864 – 11 : Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
ASTM D5865 – 13 : Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D5866 – 12 : Standard Test Method for Neps in Cotton Fibers
ASTM D5867 – 12e1 : Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM D5868 – 01(2014) : Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D5869 – 07a(2013) : Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM D5870 – 11 : Standard Practice for Calculating Property Retention Index of Plastics
ASTM D5871 – 12 : Standard Specification for Benzene for Cyclohexane Feedstock
ASTM D5872 / D5872M – 13 : Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5873 – 14 : Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D5874 – 02(2007) : Standard Test Method for Determination of the Impact Value (IV) of a Soil
ASTM D5875 / D5875M – 13 : Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5876 – 95(2012)e1 : Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D5878 – 08 : Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
ASTM D5879 – 95(2010) : Standard Practice for Surface Site Characterization for On-Site Septic Systems
ASTM D5880 – 95(2006) : Standard Guide for Subsurface Flow and Transport Modeling
ASTM D5881 – 13 : Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
ASTM D5882 – 07(2013) : Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
ASTM D5883 – 12 : Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
ASTM D5884 – 04a(2010) : Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5885 – 06(2012) : Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D5886 – 95(2011) : Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
ASTM D5887 – 09 : Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5888 – 06(2011) : Standard Guide for Storage and Handling of Geosynthetic Clay Liners
ASTM D5889 – 11 : Standard Practice for Quality Control of Geosynthetic Clay Liners
ASTM D5890 – 11 : Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
ASTM D5891 – 02(2009) : Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
ASTM D5893 / D5893M – 10 : Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
ASTM D5894 – 10 : Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D5895 – 13 : Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM D5896 – 96(2012) : Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
ASTM D5897 – 13 : Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method
ASTM D5898 / D5898M – 96(2013) : Standard Guide for Standard Details for Adhered Sheet Waterproofing
ASTM D5899 – 98(2013) : Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
ASTM D5900 – 13 : Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
ASTM D5902 – 05(2010) : Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM D5903 – 96(2012) : Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM D5904 – 02(2009) : Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D5905 – 98(2013) : Standard Practice for the Preparation of Substitute Wastewater
ASTM D5906 – 02(2013) : Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
ASTM D5907 – 13 : Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
ASTM D5909 – 96a(2011) : Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
ASTM D5910 – 05(2012) : Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM D5911 / D5911M – 96(2010)e1 : Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
ASTM D5913 – 96(2013) : Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM D5917 – 12 : Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D5918 – 13 : Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
ASTM D5919 – 96(2011) : Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D5921 – 96(2010) : Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
ASTM D5922 – 96(2010) : Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
ASTM D5923 – 96(2010) : Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
ASTM D5924 – 96(2010) : Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
ASTM D5926 – 11 : Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
ASTM D5927 – 09 : Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
ASTM D5928 – 96(2010)e1 : Standard Test Method for Screening of Waste for Radioactivity
ASTM D5929 – 96(2009) : Standard Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid Waste Composting Conditions by Compost Respirometry
ASTM D5930 – 09 : Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D5931 – 13 : Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D5932 – 08(2013) : Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
ASTM D5933 – 96(2013) : Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
ASTM D5946 – 09 : Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
ASTM D5947 – 11 : Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5948 – 05(2012) : Standard Specification for Molding Compounds, Thermosetting
ASTM D5949 – 14 : Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
ASTM D5950 – 14 : Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
ASTM D5952 – 08 : Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires’ Disease or Pontiac Fever)
ASTM D5953M – 96(2009) : Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)
ASTM D5954 – 98(2014)e1 : Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
ASTM D5955 – 02(2012)e1 : Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM D5956 – 96(2006) : Standard Guide for Sampling Strategies for Heterogeneous Wastes
ASTM D5957 – 98(2013) : Standard Guide for Flood Testing Horizontal Waterproofing Installations
ASTM D5958 – 99(2012)e1 : Standard Practices for Preparation of Oil-Based Ink Resin Solutions
ASTM D5959 – 12 : Standard Test Method for Bulk Density of Level Paintbrush Filaments
ASTM D596 – 01(2011) : Standard Guide for Reporting Results of Analysis of Water
ASTM D5960 – 03(2013) : Standard Specification for Technical Grade Ethylene Dichloride
ASTM D5961 / D5961M – 13 : Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D5963 – 04(2010)e1 : Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
ASTM D5964 – 07(2014) : Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils
ASTM D5965 – 02(2013) : Standard Test Methods for Specific Gravity of Coating Powders
ASTM D5966 – 13 : Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
ASTM D5967 – 13 : Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D5968 – 14 : Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C
ASTM D5969 – 11e1 : Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5970 – 09 : Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure
ASTM D5971 / D5971M – 13 : Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
ASTM D5972 – 05(2010) : Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D5973 – 97(2012) : Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
ASTM D5974 – 00(2010) : Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
ASTM D5975 – 96(2010) : Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption
ASTM D5977 – 03(2012) : Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
ASTM D5978 – 96(2011)e1 : Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
ASTM D5979 – 96(2014) : Standard Guide for Conceptualization and Characterization of Groundwater Systems
ASTM D5980 – 96(2010)e1 : Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
ASTM D5981 – 96(2008) : Standard Guide for Calibrating a Groundwater Flow Model Application
ASTM D5982 – 07 : Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
ASTM D5983 – 13 : Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel
ASTM D5984 – 11 : Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
ASTM D5985 – 02(2014) : Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
ASTM D5986 – 96(2011) : Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
ASTM D5987 – 96(2007) : Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D5988 – 12 : Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil
ASTM D5989 – 14 : Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
ASTM D5991 – 09 : Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
ASTM D5992 – 96(2011) : Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
ASTM D5993 – 99(2009) : Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners
ASTM D5994 – 10 : Standard Test Method for Measuring Core Thickness of Textured Geomembrane
ASTM D5995 – 98(2010) : Standard Guide for Environmental Site Characterization in Cold Regions
ASTM D5996 – 05(2009) : Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D5997 – 96(2009) : Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D5998 – 10 : Standard Specification for Molded Polyethylene Shipping and Storage Drums
ASTM D6 / D6M – 95(2011)e1 : Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
ASTM D600 – 07(2012) : Standard Specification for Liquid Paint Driers
ASTM D6000 – 96(2008) : Standard Guide for Presentation of Water-Level Information from Groundwater Sites
ASTM D6001 – 05(2012) : Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
ASTM D6004 – 04(2011) : Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
ASTM D6005 – 03(2009) : Standard Test Method for Determining Slump Resistance of Carpet Adhesives
ASTM D6006 – 11 : Standard Guide for Assessing Biodegradability of Hydraulic Fluids
ASTM D6007 – 02(2008) : Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM D6008 – 96(2014) : Standard Practice for Conducting Environmental Baseline Surveys
ASTM D6009 – 12 : Standard Guide for Sampling Waste Piles
ASTM D6010 – 12 : Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
ASTM D6011 – 96(2008) : Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
ASTM D6012 – 03(2013) : Standard Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer
ASTM D6013 – 00(2010) : Standard Test Method for Determination of Area Stability of Leather to Laundering
ASTM D6014 – 00(2010) : Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
ASTM D6015 – 14 : Standard Test Method for Static Water Absorption of Leather
ASTM D6016 – 06(2012) : Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
ASTM D6017 – 97(2009) : Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
ASTM D6018 – 96(2012) : Standard Test Method for Determining the Presence of Lead Salts in Leather
ASTM D6019 – 10 – Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
ASTM D602 – 81(2012) : Standard Specification for Barium Sulfate Pigments
ASTM D6020 – 00(2010) : Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
ASTM D6021 – 12 : Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM D6022 – 06(2012) : Standard Practice for Calculation of Permanent Shear Stability Index
ASTM D6023 – 07 : Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
ASTM D6024 – 07 : Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
ASTM D6025 – 96(2008) : Standard Guide for Developing and Evaluating Groundwater Modeling Codes
ASTM D6026 – 13 : Standard Practice for Using Significant Digits in Geotechnical Data
ASTM D6028 – 96(2010)e1 : Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
ASTM D6029 – 96(2010)e1 : Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM D6030 – 96(2008) : Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
ASTM D6031 / D6031M – 96(2010)e1 : Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
ASTM D6032 – 08 : Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
ASTM D6033 – 96(2008) : Standard Guide for Describing the Functionality of a Groundwater Modeling Code
ASTM D6034 – 96(2010)e1 : Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM D6035 / D6035M – 13 : Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
ASTM D6036 – 96(2008) : Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements – Use of Maps
ASTM D6037 – 13e1 : Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
ASTM D6038 – 14 : Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
ASTM D6039 / D6039M – 11 : Standard Specification for Open and Covered Wood Crates
ASTM D6040 – 12 : Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D6041 – 11 : Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
ASTM D6042 – 09 : Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
ASTM D6044 – 96(2009) : Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D6045 – 12 : Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D6046 – 02(2012) : Standard Classification of Hydraulic Fluids for Environmental Impact
ASTM D6047 – 99(2009) : Standard Test Methods for Rubber, Raw–Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D6048 – 07(2012) : Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers
ASTM D6049 – 03(2013) : Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
ASTM D605 – 82(2012) : Standard Specification for Magnesium Silicate Pigment (Talc)
ASTM D6050 – 09 : Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6051 – 96(2006) : Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D6052 – 97(2008) : Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6053 – 14 : Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
ASTM D6055 – 96(2014) : Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D6056 – 96(2011) : Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
ASTM D6057 – 96(2011) : Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM D6058 – 96(2011) : Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D6059 – 96(2011) : Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
ASTM D6060 – 96(2009) : Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph
ASTM D6061 – 01(2012)e1 : Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
ASTM D6062 – 07(2012) : Standard Guide for Personal Samplers of Health-Related Aerosol Fractions
ASTM D6063 – 11 : Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
ASTM D6064 – 11 : Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
ASTM D6065 – 11 : Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
ASTM D6066 – 11 : Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
ASTM D6067 – 10 : Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization
ASTM D6068 – 10 : Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6069 – 01(2006) : Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D607 – 82(2012) : Standard Specification for Wet Ground Mica Pigments
ASTM D6070 – 02(2010) : Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ASTM D6071 – 13 : Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D6072 / D6072M – 09 : Standard Practice for Obtaining Samples of Geosynthetic Clay Liners
ASTM D6073 – 08a(2013) : Standard Test Method for Relative Setting of Heatset Printing Inks
ASTM D6074 – 08 : Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
ASTM D6075 – 13 : Standard Test Method for Cracking Resistance of Leather
ASTM D6076 – 08(2013) : Standard Test Method for Shrinkage Temperature of Leather
ASTM D6077 – 10 : Standard Test Method for Trapezoid Tearing Strength of Leather
ASTM D6078 – 04(2010) : Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
ASTM D6079 – 11 : Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D608 – 05(2011) : Standard Specification for Dibutyl Phthalate
ASTM D6080 – 12a : Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
ASTM D6081 – 98(2009) : Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM D6082 – 12 : Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
ASTM D6083 – 05e1 : Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
ASTM D6084 / D6084M – 13 : Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
ASTM D6085 – 97(2011) : Standard Practice for Sampling in Rubber Testing – Terminology and Basic Concepts
ASTM D6086 – 09a : Standard Test Method for Carbon Black—Void Volume (VV)
ASTM D6087 – 08 : Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
ASTM D6088 – 06(2011) : Standard Practice for Installation of Geocomposite Pavement Drains
ASTM D6089 – 97(2010) : Standard Guide for Documenting a Groundwater Sampling Event
ASTM D609 – 00(2012) : Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM D6090 – 12 : Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
ASTM D6091 – 07(2014) : Standard Practice for 99?%/95?% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM D6092 – 14 : Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
ASTM D6093 – 97(2011) : Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6095 – 12 : Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6096 – 11 : Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
ASTM D6097 – 01a(2008)e1 : Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
ASTM D6098 – 10 : Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
ASTM D6099 – 13 : Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
ASTM D61 – 75(2010) : Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
ASTM D610 – 08(2012) : Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D6100 – 14 : Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
ASTM D6102 – 12 : Standard Guide for Installation of Geosynthetic Clay Liners
ASTM D6104 – 97(2011) : Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
ASTM D6105 – 04(2012) : Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
ASTM D6106 – 97(2010) : Standard Guide for Establishing Nomenclature of Groundwater Aquifers
ASTM D6107 – 97(2012) : Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
ASTM D6108 – 13 : Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM D6109 – 13 : Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
ASTM D611 – 12 : Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
ASTM D6110 – 10 : Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6111 – 13a : Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
ASTM D6112 – 13 : Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D6113 – 11 : Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6114 / D6114M – 09 : Standard Specification for Asphalt-Rubber Binder
ASTM D6115 – 97(2011) : Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D6116 – 00(2010) : Standard Test Method for Blocking
ASTM D6117 – 13 : Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
ASTM D6119 – 12 : Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
ASTM D612 – 88(2012) : Standard Test Method for Carbonizable Substances in Paraffin Wax
ASTM D6120 – 97(2012) : Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM D6121 – 14 : Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6122 – 13 : Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6123 / D6123M – 97(2012) : Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
ASTM D6124 – 06(2011) : Standard Test Method for Residual Powder on Medical Gloves
ASTM D6126 / D6126M – 11e1 : Standard Specification for HFC-23 (Trifluoromethane, CHF3)
ASTM D6127 – 11 : Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)
ASTM D6128 – 06 : Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
ASTM D6129 – 97(2007) : Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D613 – 13 : Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM D6130 – 11 : Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D6131 – 97(2012) : Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
ASTM D6132 – 13 : Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D6133 – 02(2008) : Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D6134 – 07(2013) : Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
ASTM D6135 – 05 : Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing
ASTM D6136 / D6136M – 97(2013)e1 : Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method
ASTM D6137 – 97(2012) : Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
ASTM D6138 – 13 : Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
ASTM D6139 – 11 : Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
ASTM D6140 – 00(2014) : Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM D6141 – 09 : Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
ASTM D6142 – 12 : Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
ASTM D6143 – 13 : Standard Test Method for Iron Content of Bisphenol A (4,4′ – Isopropylidenediphenol)
ASTM D6144 – 13 : Standard Test Method for Analysis of AMS (a-Methylstyrene) by Capillary Gas Chromatography
ASTM D6145 – 97(2012) : Standard Guide for Monitoring Sediment in Watersheds
ASTM D6146 – 97(2012) : Standard Guide for Monitoring Aqueous Nutrients in Watersheds
ASTM D6147 – 97(2008)e1 : Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
ASTM D6150 – 09 : Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
ASTM D6151 – 08 : Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
ASTM D6152 / D6152M – 12 : Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
ASTM D6153 – 97(2007) : Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
ASTM D6154 – 09 : Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
ASTM D6155 – 13 : Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
ASTM D6157 – 97(2011) : Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
ASTM D6158 – 10 : Standard Specification for Mineral Hydraulic Oils
ASTM D6159 – 97(2012) : Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
ASTM D6160 – 98(2013) : Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
ASTM D6161 – 10 : Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes
ASTM D6162 – 00a(2008) : Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM D6163 – 00(2008) : Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
ASTM D6164 / D6164M – 11 : Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6165 – 97(2012) : Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
ASTM D6166 – 12 : Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
ASTM D6167 – 11 : Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
ASTM D6168 – 97(2010) : Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
ASTM D6169 / D6169M – 13 : Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM D6170 – 97(2010) : Standard Guide for Selecting a Groundwater Modeling Code
ASTM D6171 – 97(2010) : Standard Guide for Documenting a Groundwater Modeling Code
ASTM D6172 – 98(2010) : Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
ASTM D6173 – 97(2014) : Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
ASTM D6174 – 01(2006) : Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
ASTM D6175 – 03(2013) : Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D6176 – 97(2008) : Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM D6177 – 97(2008)e1 : Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
ASTM D6178 – 97(2008) : Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
ASTM D6179 – 07(2014) : Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D618 – 13 : Standard Practice for Conditioning Plastics for Testing
ASTM D6182 – 00(2010) : Standard Test Method for Flexibility and Adhesion of Finish on Leather
ASTM D6183 – 00(2010) : Standard Test Method for Tackiness of Finish on Leather
ASTM D6184 – 98(2005) : Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
ASTM D6185 – 11 : Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
ASTM D6186 – 08(2013) : Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D6187 – 97(2010) : Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
ASTM D6188 – 97(2008) : Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
ASTM D6189 – 97(2008) : Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
ASTM D6191 – 97(2008)e1 : Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
ASTM D6192 – 11 : Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus
ASTM D6193 – 11 : Standard Practice for Stitches and Seams
ASTM D6194 – 10 : Standard Test Method for Glow-Wire Ignition of Materials
ASTM D6195 – 03(2011) : Standard Test Methods for Loop Tack
ASTM D6196 – 03(2009) : Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
ASTM D6197 – 99(2011) : Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests
ASTM D6198 – 12 : Standard Guide for Transport Packaging Design
ASTM D6199 – 07(2012) : Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM D6200 – 01(2012) : Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6201 – 04(2009) : Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM D6203 – 06(2012) : Standard Test Method for Thermal Stability of Way Lubricants
ASTM D6204 – 12 : Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6205 – 12 : Standard Practice for Calibration of the James Static Coefficient of Friction Machine
ASTM D6206 – 09 : Standard Practice for Sampling of Coating Films
ASTM D6207 – 03(2011) : Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6208 – 07(2014) : Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM D6209 – 13 : Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
ASTM D6210 – 10 : Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D6213 – 97(2009) : Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
ASTM D6214 / D6214M – 98(2013)e1 : Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
ASTM D6216 – 12 : Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
ASTM D6217 – 11 : Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D622 – 99(2012) : Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
ASTM D6221 / D6221M – 00(2014)e1 : Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
ASTM D6222 / D6222M – 11 : Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D6223 / D6223M – 02(2009)e1 : Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
ASTM D6224 – 09 : Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D6225 / D6225M – 98(2012)e1 : Standard Test Method for Granule Cover of Mineral Surfaced Roofing
ASTM D6226 – 10 : Standard Test Method for Open Cell Content of Rigid Cellular Plastics
ASTM D6227 – 14 : Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D6228 – 10 : Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
ASTM D6229 – 06(2010) : Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
ASTM D623 – 07(2014) : Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM D6230 – 13 : Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM D6231 – 11 : Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)
ASTM D6232 – 08 : Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities
ASTM D6233 – 98(2009) : Standard Guide for Data Assessment for Environmental Waste Management Activities
ASTM D6234 – 13 : Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM D6235 – 04(2010) : Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
ASTM D6236 – 11 : Standard Guide for Coring and Logging Cement – or Lime-Stabilized Soil
ASTM D6237 – 09 : Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM D6238 – 98(2011) : Standard Test Method for Total Oxygen Demand in Water
ASTM D6239 – 09 : Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
ASTM D624 – 00(2012) : Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D6240 / D6240M – 12e1 : Standard Tables of Body Measurements for Mature Men, ages 35 and older, Sizes Thirty-Four to Fifty-Two (34 to 52) Short, Regular, and Tall
ASTM D6241 – 04(2009)e1 : Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D6243 / D6243M – 13a : Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D6244 – 06(2011) : Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D6245 – 12 : Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
ASTM D6246 – 08(2013) : Standard Practice for Evaluating the Performance of Diffusive Samplers
ASTM D6247 – 10 : Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D6248 – 98(2012)e1 : Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D6249 – 06(2011) : Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
ASTM D6250 – 98(2009) : Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
ASTM D6251 / D6251M – 11 : Standard Specification for Wood-Cleated Panelboard Shipping Boxes
ASTM D6252 / D6252M – 98(2011) : Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
ASTM D6253 – 10 : Standard Practice for Treatment and/or Marking of Wood Packaging Materials
ASTM D6254 / D6254M – 13 : Standard Specification for Wirebound Pallet-Type Wood Boxes
ASTM D6255 / D6255M – 05(2011) : Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM D6256 / D6256M – 10 : Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases
ASTM D6258 – 09 : Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D6259 – 98(2010) : Standard Practice for Determination of a Pooled Limit of Quantitation
ASTM D6261 – 14 : Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
ASTM D6262 – 12 : Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
ASTM D6263 – 11 : Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
ASTM D6264 / D6264M – 12 : Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM D6265 – 09 : Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
ASTM D6266 – 00a(2011) – Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D6267 / D6267M – 13 : Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
ASTM D6268 – 09 : Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5)
ASTM D6270 – 08(2012) : Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM D6271 – 10 : Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
ASTM D6272 – 10 : Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6273 – 14 : Standard Test Methods for Natural Gas Odor Intensity
ASTM D6274 – 10 : Standard Guide for Conducting Borehole Geophysical Logging – Gamma
ASTM D6276 – 99a(2006)e1 : Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
ASTM D6277 – 07(2012) : Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6278 – 12e1 : Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
ASTM D6279 – 03(2013) : Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
ASTM D628 / D628M – 95(2009)e1 : Standard Specification for Asbestos Tubular Sleeving
ASTM D6280 – 98(2008) : Standard Specification for Zinc Phosphate Pigments
ASTM D6281 – 09 : Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
ASTM D6283 – 12 : Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
ASTM D6284 – 09 : Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
ASTM D6285 – 99(2012)e1 : Standard Guide for Locating Abandoned Wells
ASTM D6286 – 12 : Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
ASTM D6287 – 09 : Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM D6288 – 09 : Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
ASTM D6289 – 13 : Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
ASTM D629 – 08 : Standard Test Methods for Quantitative Analysis of Textiles
ASTM D6290 – 13 : Standard Test Method for Color Determination of Plastic Pellets
ASTM D6294 / D6294M – 13 : Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
ASTM D6295 / D6295M – 98(2011) : Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
ASTM D6296 – 98(2013) : Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
ASTM D6297 – 13 : Standard Specification for Asphaltic Plug Joints for Bridges
ASTM D6298 – 13 : Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
ASTM D6299 – 13 : Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6300 – 13a : Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6301 – 13 : Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water
ASTM D6302 – 98(2009) : Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
ASTM D6304 – 07 : Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D6305 – 08 : Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM D6306 – 10 : Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
ASTM D6307 – 10 : Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
ASTM D6311 – 98(2014) : Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D6312 – 98(2012)e1 : Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs
ASTM D6316 – 09be1 : Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
ASTM D6317 – 98(2009) : Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D6318 – 03(2014) : Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM D6319 – 10 : Standard Specification for Nitrile Examination Gloves for Medical Application
ASTM D632 – 12 : Standard Specification for Sodium Chloride
ASTM D6320 / D6320M – 10(2014) : Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
ASTM D6321 / D6321M – 14 : Standard Practice for the Evaluation of Machine Washable T-Shirts
ASTM D6322 – 07 : Standard Guide to International Test Methods Associated with Textile Care Procedures
ASTM D6323 – 12e1 : Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
ASTM D6324 – 11 : Standard Test Methods for Male Condoms Made from Polyurethane
ASTM D6325 – 98(2011) – Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
ASTM D6326 – 08(2014) : Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers
ASTM D6327 – 10 : Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D6328 – 12 : Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
ASTM D6329 – 98(2008) : Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM D633 – 11 : Standard Volume Correction Table for Road Tar
ASTM D6330 – 98(2008) : Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
ASTM D6331 – 13 : Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6332 – 12 : Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D6333 – 10 : Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
ASTM D6334 – 12 : Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM D6335 – 09 : Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
ASTM D6336 – 11 : Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
ASTM D6337 – 98(2013) : Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics
ASTM D6338 – 10 : Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods
ASTM D6339 – 11 : Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ASTM D6340 – 98(2007) : Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment
ASTM D6341 – 14 : Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)
ASTM D6342 – 12 : Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
ASTM D6343 – 10 – Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
ASTM D6344 – 04(2009) : Standard Test Method for Concentrated Impacts to Transport Packages
ASTM D6345 – 10 : Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
ASTM D6346 – 98(2009) : Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs
ASTM D6347 / D6347M – 05(2010) : Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D6348 – 12 : Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
ASTM D6349 – 13 : Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM D635 – 10 : Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM D6350 – 14 : Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM D6351 – 10 : Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D6352 – 12 : Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
ASTM D6353 – 06(2011) : Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
ASTM D6354 – 12 : Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ASTM D6355 – 07(2012) : Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
ASTM D6356 / D6356M – 98(2011)e1 : Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
ASTM D6357 – 11 – Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry
ASTM D6358 – 11 : Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods
ASTM D6360 – 07 : Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
ASTM D6361 / D6361M – 98(2010)e1 : Standard Guide for Selecting Cleaning Agents and Processes
ASTM D6362 – 98(2013) : Standard Practice for Certificates of Reference Materials for Water Analysis
ASTM D6363 – 98(2013) : Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
ASTM D6364 – 06(2011) : Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D6365 – 99(2011) : Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
ASTM D6367 – 12 : Standard Specification for AMS (a-Methylstyrene)
ASTM D6368 – 06(2012) : Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide
ASTM D6369 – 99(2006) : Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes
ASTM D6370 – 99(2009) : Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D6371 – 05(2010) : Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
ASTM D6372 – 05(2010) : Standard Practice for Design, Testing, and Construction of Micro-Surfacing
ASTM D6373 – 13 : Standard Specification for Performance Graded Asphalt Binder
ASTM D6374 – 12 : Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
ASTM D6375 – 09 : Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6376 – 10 : Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
ASTM D6377 – 10 : Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
ASTM D6378 – 10 : Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
ASTM D6379 – 11 : Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D638 – 10 : Standard Test Method for Tensile Properties of Plastics
ASTM D6380 / D6380M – 03(2013)e1 : Standard Specification for Asphalt Roll Roofing (Organic Felt)
ASTM D6381 / D6381M – 08(2013)e1 : Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
ASTM D6382 / D6382M – 99(2011)e1 : Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM D6383 / D6383M – 99(2011)e1 : Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D6384 – 11 : Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
ASTM D6385 – 99(2011) : Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
ASTM D6386 – 10 : Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D6387 – 99(2010)e1 : Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
ASTM D6388 – 99(2012) : Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
ASTM D6389 – 99(2012) : Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
ASTM D6390 – 11 : Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
ASTM D6391 – 11 : Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
ASTM D6392 – 12 : Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
ASTM D6393 – 08 : Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6394 – 14 : Standard Specification for Sulfone Plastics (SP)
ASTM D6395 – 11 : Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
ASTM D6396 – 99(2012) : Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
ASTM D6398 – 08(2014) : Standard Practice to Enhance Identification of Drug Names on Labels
ASTM D6399 – 10 : Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
ASTM D6400 – 12 : Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
ASTM D6401 – 99(2009) : Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials
ASTM D6402 – 99(2009) : Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
ASTM D6403 – 99(2009) : Standard Test Method for Determining Moisture in Raw and Spent Materials
ASTM D6404 – 99(2009) : Standard Practice for Sampling Vegetable Materials Containing Tannin
ASTM D6405 – 99(2009) : Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D6406 – 99(2009) : Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
ASTM D6407 – 99(2009) : Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
ASTM D6408 – 99(2009) : Standard Test Method for Analysis of Tannery Liquors
ASTM D6409 – 99(2009) : Standard Practice for Color Tests with Sheepskin Skiver
ASTM D6410 – 99(2009) : Standard Test Method for Determining Acidity of Vegetable Tanning Liquors
ASTM D6411 / D6411M – 99(2012) : Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM D6412 / D6412M – 99(2012) : Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
ASTM D6413 / D6413M – 13b : Standard Test Method for Flame Resistance of Textiles (Vertical Test)
ASTM D6414 – 14 : Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
ASTM D6415 / D6415M – 06a(2013) : Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6416 / D6416M – 01(2012) : Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D6417 – 09 : Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
ASTM D6418 – 09 : Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis
ASTM D6419 – 00(2009) : Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
ASTM D642 – 00(2010) : Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
ASTM D6420 – 99(2010) : Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
ASTM D6421 – 99a(2009) : Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
ASTM D6423 – 08 : Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
ASTM D6424 – 04a(2010) : Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
ASTM D6425 – 11 : Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
ASTM D6426 – 13 : Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
ASTM D6427 / D6427M – 10 : Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF3CH2CF3)
ASTM D6429 – 99(2011)e1 : Standard Guide for Selecting Surface Geophysical Methods
ASTM D6430 – 99(2010) : Standard Guide for Using the Gravity Method for Subsurface Investigation
ASTM D6431 – 99(2010) : Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
ASTM D6432 – 11 : Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
ASTM D6433 – 11 : Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
ASTM D6434 – 12 : Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
ASTM D6436 – 14 : Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
ASTM D6437 – 05(2010)e1 : Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)
ASTM D6438 – 05(2010) : Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
ASTM D6439 – 11 : Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
ASTM D6440 – 10 : Standard Terminology Relating to Hydrocarbon Resins
ASTM D6441 – 05(2010) : Standard Test Methods for Measuring the Hiding Power of Powder Coatings
ASTM D6442 – 06(2012) : Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
ASTM D6443 – 04(2010) – Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D6447 – 09 : Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
ASTM D6448 – 09 : Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
ASTM D6449 – 99(2008) : Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
ASTM D6450 – 12e1 : Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D6451 / D6451M – 99(2014)e1 : Standard Guide for Application of Asphalt Based Protection Board
ASTM D6452 – 99(2012)e1 : Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
ASTM D6454 – 99(2011) : Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
ASTM D6455 – 11 : Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
ASTM D6456 – 10 : Standard Specification for Finished Parts Made from Polyimide Resin
ASTM D6457 – 08(2013) : Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
ASTM D6458 – 12 : Standard Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular
ASTM D6459 – 11 : Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
ASTM D646 – 13 : Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
ASTM D6460 – 12 : Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM D6461 – 99(2007)e2 : Standard Specification for Silt Fence Materials
ASTM D6462 – 03(2008) : Standard Practice for Silt Fence Installation
ASTM D6463 / D6463M – 06(2012) : Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D6464 – 03a(2009)e1 : Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D6465 – 99(2012) : Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM D6466 – 10 : Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D6467 – 13 : Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
ASTM D6468 – 08(2013) : Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D6469 – 12 : Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D6470 – 99(2010) : Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D6471 – 10 : Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM D6472 – 10 : Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM D6473 – 10 : Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control
ASTM D6474 – 12 : Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6475 – 06 : Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM D6476 – 12 : Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
ASTM D6477 – 13 : Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D6478 – 10 : Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
ASTM D6479 – 12 : Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
ASTM D648 – 07 : Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D6480 – 05(2010) : Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
ASTM D6481 – 99(2010) : Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
ASTM D6482 – 06(2011) : Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6484 / D6484M – 14 : Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D6485 – 11 : Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
ASTM D6486 – 01(2011) : Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
ASTM D6487 – 10 : Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press
ASTM D6488 – 08(2013) : Standard Terminology Relating to Print Problems
ASTM D6489 – 99(2012) : Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
ASTM D6490 – 99(2006) : Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
ASTM D6491 – 09 : Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
ASTM D6492 – 99(2011) : Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D6493 – 11 : Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
ASTM D6494 – 99(2010) : Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D6495 – 09 : Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
ASTM D6496 – 04a(2009) : Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
ASTM D6497 – 02(2010) : Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
ASTM D6498 – 99(2007) : Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations
ASTM D6499 – 12 : Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products
ASTM D6500 – 00(2012)e1 : Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D6501 – 09 : Standard Test Method for Phosphonate in Brines
ASTM D6502 – 10 : Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
ASTM D6503 – 99(2009) : Standard Test Method for Enterococci in Water Using Enterolert
ASTM D6504 – 11 : Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
ASTM D6505 – 00(2012) : Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM D6506 – 01(2009) : Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing
ASTM D6507 – 11 : Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
ASTM D6508 – 10 : Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
ASTM D6509 / D6509M – 09 : Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
ASTM D6510 – 00(2006) : Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems
ASTM D6511 / D6511M – 06(2011)e1 : Standard Test Methods for Solvent Bearing Bituminous Compounds
ASTM D6512 – 07(2014) : Standard Practice for Interlaboratory Quantitation Estimate
ASTM D6513 – 08 : Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
ASTM D6514 – 03(2008) : Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
ASTM D6515 – 00(2010) : Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6517 – 00(2012)e1 : Standard Guide for Field Preservation of Groundwater Samples
ASTM D6519 – 08 : Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D6520 – 06(2012) : Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
ASTM D6521 – 13 : Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
ASTM D6522 – 11 : Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
ASTM D6523 – 00(2014)e1 : Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
ASTM D6524 – 00(2011) : Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
ASTM D6525 – 12 : Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM D6526 – 12 : Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
ASTM D6527 – 00(2008) : Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
ASTM D6528 – 07 : Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
ASTM D6529 – 11 : Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50–1000 µS/cm
ASTM D653 – 11 : Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D6530 – 00(2013) : Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
ASTM D6531 – 00(2010) : Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM D6532 – 00(2006) : Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
ASTM D6534 – 05(2010) : Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM D6535 / D6535M – 05(2010)e1 : Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
ASTM D6536 / D6536M – 00(2010)e1 : Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
ASTM D6537 – 00(2014) : Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM D6538 – 12 : Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D6539 – 13 : Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air
ASTM D6540 – 12 : Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering
ASTM D6541 – 11 : Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF3CH 2CF3)
ASTM D6542 – 05(2010) : Standard Practice for Tonnage Calculation of Coal in a Stockpile
ASTM D6543 – 14a : Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
ASTM D6544 – 12 : Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM D6545 – 10 : Standard Test Method for Flammability of Textiles Used in Children’s Sleepwear
ASTM D6546 – 00(2010) : Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
ASTM D6547 – 00(2010) : Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
ASTM D6549 – 06(2011) : Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6550 – 10 : Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
ASTM D6551 / D6551M – 05(2011) : Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM D6552 – 06(2011) : Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
ASTM D6553 – 00(2010) : Standard Test Method for Coolant Compatibility of Way Lubricants
ASTM D6554 / D6554M – 14 : Standard Specification for 100?% Cotton Denim Fabrics
ASTM D6555 – 03(2008) : Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
ASTM D6556 – 10 : Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6557 – 13 : Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
ASTM D6558 – 00a(2010) : Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D6559 – 00a(2010) : Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D6560 – 12 : Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM D6561 – 06(2011) : Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace
ASTM D6562 – 12 : Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
ASTM D6563 – 12 : Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
ASTM D6564 – 00(2012)e1 : Standard Guide for Field Filtration of Groundwater Samples
ASTM D6565 – 00(2005) : Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
ASTM D6566 – 14 : Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6567 – 14 : Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
ASTM D6568 – 00(2011) : Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
ASTM D6569 – 14 : Standard Test Method for On-Line Measurement of pH
ASTM D6570 – 04(2010) : Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
ASTM D6572 – 13e1 : Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
ASTM D6573 / D6573M – 13 : Standard Specification for General Purpose Wirebound Shipping Boxes
ASTM D6574 / D6574M – 13e1 : Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
ASTM D6575 – 14 : Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM D6576 – 13 : Standard Specification for Flexible Cellular Rubber Chemically Blown
ASTM D6577 – 06(2011)e1 : Standard Guide for Testing Industrial Protective Coatings
ASTM D6578 / D6578M – 13 : Standard Practice for Determination of Graffiti Resistance
ASTM D6579 – 11 : Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM D6580 – 00(2009) : Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM D6581 – 12 : Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM D6583 – 13 : Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
ASTM D6584 – 13e1 : Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D6585 – 11 : Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D6586 – 03(2008) : Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
ASTM D6587 – 12e1 : Standard Test Method for Yarn Number Using Automatic Tester
ASTM D6588 / D6588M – 11 : Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
ASTM D6589 – 05(2010)e1 : Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
ASTM D6590 / D6590M – 00(2012) : Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
ASTM D6591 – 11 : Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D6593 – 14 : Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6594 – 14 : Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C
ASTM D6595 – 00(2011) : Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D6596 – 00(2011) : Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
ASTM D6597 – 10 : Standard Practice for Assessment of Attaining Clean Up Level for Site Closure
ASTM D6598 – 11 : Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
ASTM D6599 – 00(2008) : Standard Practice for Construction of Live Fascines on Slopes
ASTM D660 – 93(2011) : Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM D6600 – 00(2013) : Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
ASTM D6601 – 12 : Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D6602 – 13 : Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6603 – 12 : Standard Specification for Labeling of UV-Protective Textiles
ASTM D6604 – 00(2013) : Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
ASTM D6605 – 06(2011) : Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
ASTM D6606 – 00(2010) : Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer
ASTM D6607 – 00(2009) : Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
ASTM D6608 – 12 : Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
ASTM D6609 – 08 : Standard Guide for Part-Stream Sampling of Coal
ASTM D661 – 93(2011) : Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
ASTM D6611 – 00(2007) : Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
ASTM D6612 – 00(2011) : Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
ASTM D6613 – 08(2013) : Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric
ASTM D6614 – 07(2011) : Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method
ASTM D6615 – 14 : Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D6616 – 07(2012) : Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C
ASTM D6617 – 13 : Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6618 – 14 : Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
ASTM D6619 – 00(2012) : Standard Practice for Incorporating Pigments by High Speed Dispersion
ASTM D662 – 93(2011) : Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
ASTM D6620 – 06(2010) : Standard Practice for Asbestos Detection Limit Based on Counts
ASTM D6621 – 00(2012) : Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D6622 – 01(2009) : Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
ASTM D6624 – 12 : Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6625 – 13 : Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
ASTM D6626 – 09 : Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
ASTM D6627 / D6627M – 11 : Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM D6628 – 03(2010)e1 : Standard Specification for Color of Pavement Marking Materials
ASTM D6629 – 01(2012)e1 : Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion
ASTM D6630 – 08 : Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
ASTM D6631 – 05(2011) : Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
ASTM D6633 – 05(2010) : Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
ASTM D6634 / D6634M – 14 : Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
ASTM D6635 – 01(2007) : Standard Test Method for Performing the Flat Plate Dilatometer
ASTM D6636 – 01(2011) : Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6637 – 11 : Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM D6638 – 11 : Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
ASTM D6639 – 01(2008) : Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
ASTM D664 – 11a : Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6640 – 01(2010) : Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D6641 / D6641M – 09 : Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6642 – 01(2006) : Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
ASTM D6643 – 01(2011) : Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
ASTM D6644 – 01(2013) : Standard Test Method for Tension Strength of Sew-Through Flange Buttons
ASTM D6645 – 01(2010) : Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D6646 – 03(2008) : Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
ASTM D6647 – 01(2011) : Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
ASTM D6648 – 08 : Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D665 – 12 : Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
ASTM D6653 / D6653M – 13 : Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM D6654 – 05(2010) : Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
ASTM D6655 – 01(2007) : Standard Terminology Relating to Mechanical Pump Dispensers
ASTM D6657 – 14 : Standard Test Method for pH of Wet Blue
ASTM D6658 – 08(2013) : Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
ASTM D6659 – 10 : Standard Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests
ASTM D6660 – 01(2007) : Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D6661 – 10 : Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM D6662 – 13 : Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
ASTM D6663 – 08(2013) : Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use
ASTM D6665 – 09 : Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
ASTM D6666 – 04(2009) : Standard Guide for Evaluation of Aqueous Polymer Quenchants
ASTM D6667 – 10 : Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D6668 – 01(2010) : Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1
ASTM D6669 – 12 : Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
ASTM D6670 – 13 : Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
ASTM D6671 / D6671M – 13 : Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D6672 – 08 : Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines
ASTM D6673 – 10 : Standard Practice for Sewn Products Pattern Data Interchange-Data Format
ASTM D6674 – 01(2013) : Standard Guide for Proficiency Test Program for Fabrics
ASTM D6675 – 01(2011) : Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
ASTM D6676 / D6676M – 13 : Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
ASTM D6677 – 07(2012) : Standard Test Method for Evaluating Adhesion by Knife
ASTM D668 – 12 : Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
ASTM D6681 – 14 : Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D6682 – 08 : Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
ASTM D6683 – 14 : Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM D6684 – 04(2010) : Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
ASTM D6685 – 01(2008) : Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
ASTM D6686 – 01(2013) : Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
ASTM D6687 – 07(2013) : Standard Guide for Testing Printing Ink Vehicles and Components Thereof
ASTM D6688 – 11 : Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
ASTM D6689 – 01(2011) : Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM D6690 – 12 : Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
ASTM D6691 – 09 : Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
ASTM D6693 – 04(2010) : Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D6694 / D6694M – 08(2013)e1 : Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
ASTM D6695 – 08 : Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D6696 – 14 : Standard Guide for Understanding Cyanide Species
ASTM D6698 – 14 : Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
ASTM D6699 – 01(2010) : Standard Practice for Sampling Liquids Using Bailers
ASTM D6700 – 01(2013) : Standard Practice for Use of Scrap Tire-Derived Fuel
ASTM D6703 – 13 : Standard Test Method for Automated Heithaus Titrimetry
ASTM D6704 – 08 : Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D6705 / D6705M – 04(2011)e1 : Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
ASTM D6706 – 01(2013) : Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM D6707 – 06(2011) : Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
ASTM D6708 – 13 : Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6709 – 14 : Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
ASTM D6710 – 02(2012) : Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
ASTM D6711 – 01(2008) : Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
ASTM D6712 – 01(2009) : Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM D6713 – 14 : Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
ASTM D6714 – 01(2010)e1 : Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
ASTM D6715 – 13 : Standard Practice for Sampling and Preparation of Fresh or Salt-Preserved (Cured) Hides and Skins for Chemical and Physical Tests
ASTM D6716 – 08(2013) : Standard Test Method for Total Ash in Wet Blue or Wet White
ASTM D6717 – 07(2012) : Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D6719 – 12 : Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering
ASTM D6720 – 07(2012) : Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
ASTM D6721 – 01(2006) : Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
ASTM D6722 – 11 : Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
ASTM D6723 – 12 : Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
ASTM D6724 – 04(2010) : Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
ASTM D6725 – 04(2010) : Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
ASTM D6726 – 01(2007) : Standard Guide for Conducting Borehole Geophysical Logging – Electromagnetic Induction
ASTM D6727 – 01(2007) : Standard Guide for Conducting Borehole Geophysical Logging – Neutron
ASTM D6728 – 11 : Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D6729 – 04(2009) : Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM D6730 – 01(2011) : Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6731 – 01(2011) : Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
ASTM D6732 – 04(2010) : Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D6733 – 01(2011) : Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D6734 – 01(2009) : Standard Test Method for Low Levels of Coliphages in Water
ASTM D6735 – 01(2009) : Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method
ASTM D6736 – 08(2013) : Standard Test Method for Burnish Resistance of Latex Paints
ASTM D6737 – 12 : Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
ASTM D6738 – 11 : Standard Test Method for Precipitated Silica – Volatile Content
ASTM D6739 – 11 : Standard Test Method for Silica – pH Value
ASTM D6740 – 10 : Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
ASTM D6741 – 10 : Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM D6742 / D6742M – 12 : Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ASTM D6743 – 11 : Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM D6744 – 06(2011)e1 : Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM D6745 – 11 : Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D6746 – 10 : Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
ASTM D6747 – 12 : Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes
ASTM D6748 – 02a(2012) : Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
ASTM D6749 – 02(2012) : Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ASTM D6750 – 14 : Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure(0.4?% Fuel Sulfur) and 1N Procedure(0.04?% Fuel Sulfur)
ASTM D6751 – 12 : Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D6752 / D6752M – 11 : Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6753 / D6753M – 02(2009) : Standard Specification for Coal Tar Adhesive
ASTM D6754 / D6754M – 10 : Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM D6756 – 10 : Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D6757 – 07(2013) : Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
ASTM D6758 – 08 : Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
ASTM D6759 – 09 : Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D6760 – 08 : Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
ASTM D6761 – 07(2012) : Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6762 – 02a(2009)e1 : Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM D6763 – 08 : Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
ASTM D6764 – 02(2013) : Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
ASTM D6765 – 13 : Standard Practice for Live Staking
ASTM D6766 – 12 : Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
ASTM D6767 – 11 : Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
ASTM D6768 – 04(2009) : Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
ASTM D6769 / D6769M – 02(2010)e1 : Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
ASTM D6770 – 07(2011) : Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
ASTM D6772 – 02(2007) : Standard Test Method for Dimensional Stability of Sandwich Core Materials
ASTM D6773 – 08 : Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
ASTM D6774 – 02(2010) : Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
ASTM D6775 – 13 : Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
ASTM D6777 – 02(2010)e1 : Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
ASTM D6778 – 12 : Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
ASTM D6779 – 12a : Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
ASTM D6780 / D6780M – 12 : Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
ASTM D6781 – 02(2007) : Standard Guide for Carbon Reactivation
ASTM D6782 – 13 : Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6783 – 05(2011) : Standard Specification for Polymer Concrete Pipe
ASTM D6784 – 02(2008) : Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
ASTM D6785 – 13 : Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D6786 – 08 : Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D6787 / D6787M – 02(2012)e1 : Standard Specification for Repositionable Note Pad
ASTM D6788 – 02(2012) : Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM D6790 / D6790M – 14 : Standard Test Method for Determining Poisson’s Ratio of Honeycomb Cores
ASTM D6791 – 11 : Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D6792 – 13 : Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D6793 – 02(2012) : Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6794 – 14 : Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long(6?h) Heating Time
ASTM D6795 – 13 : Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
ASTM D6796 – 02(2008) : Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
ASTM D6797 – 07(2011) : Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
ASTM D6798 – 02(2013) : Standard Terminology Relating to Flax and Linen
ASTM D6799 – 13 : Standard Terminology Relating to Inflatable Restraints
ASTM D6800 – 12 : Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
ASTM D6801 – 07 : Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials
ASTM D6802 – 02(2010) – Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
ASTM D6803 – 13 : Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers
ASTM D6804 – 02(2011) : Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM D6805 – 02(2008) : Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions
ASTM D6806 – 02(2012) : Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
ASTM D6807 – 02(2009) : Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 S/cm
ASTM D6808 – 02(2012) : Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
ASTM D6809 – 02(2012) : Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D6810 – 13 : Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D6812 – 04a(2010) : Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
ASTM D6813 – 02a(2013) : Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
ASTM D6814 – 02(2013) : Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM D6815 – 09 : Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM D6816 – 11 : Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
ASTM D6817 / D6817M – 13a : Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D6818 – 14 : Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products
ASTM D6820 – 02(2007) : Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
ASTM D6821 – 12 : Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6822 – 12b : Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D6823 – 08(2013) : Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
ASTM D6824 – 13e1 : Standard Test Method for Determining Filterability of Aviation Turbine Fuel
ASTM D6825 – 14 : Standard Guide for Placement of Riprap Revetments
ASTM D6826 – 05(2014)e1 : Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
ASTM D6827 – 02(2008) : Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
ASTM D6828 – 02(2011) : Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
ASTM D6829 – 02(2008) : Standard Tables of Body Measurements for Juniors, Sizes 0 to 19
ASTM D6830 – 02(2008) : Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
ASTM D6831 – 11 : Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6832 – 13e1 : Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
ASTM D6834 – 02(2008) : Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
ASTM D6835 – 08(2014) : Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
ASTM D6836 – 02(2008)e2 : Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
ASTM D6837 – 13 : Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
ASTM D6838 – 04(2010) : Standard Test Method for Cummins M11 High Soot Test
ASTM D6839 – 13 : Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
ASTM D6840 – 02(2013) : Standard Test Method for Effect of Drycleaning on Buttons
ASTM D6841 – 08 : Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
ASTM D6842 – 02(2007) : Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D6843 – 10 : Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
ASTM D6844 – 10 : Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
ASTM D6845 – 12 : Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D6846 – 02(2012) : Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
ASTM D6849 – 13 : Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
ASTM D685 – 12 : Standard Practice for Conditioning Paper and Paper Products for Testing
ASTM D6850 – 13 : Standard Guide for QC of Screening Methods in Water
ASTM D6851 – 02(2011) : Standard Test Method for Determination of Contact pH with Activated Carbon
ASTM D6854 – 12a : Standard Test Method for Silica-Oil Absorption Number
ASTM D6855 – 12 : Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
ASTM D6856 / D6856M – 03(2008)e1 : Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
ASTM D6857 / D6857M – 11 : Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6859 – 11 : Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
ASTM D6860 / D6860M – 13 : Standard Tables of Body Measurements for Boys, Sizes 4H to 20H Husky
ASTM D6862 – 11 : Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM D6864 – 11 : Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
ASTM D6865 – 11 : Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM&
ASTM D6866 – 12 : Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6867 – 03(2009) : Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
ASTM D6868 – 11 : Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
ASTM D6869 – 03(2011) : Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D6871 – 03(2008) : Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
ASTM D6873 / D6873M – 08 : Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
ASTM D6874 – 12 : Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
ASTM D6875 – 12 : Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
ASTM D6877 – 13e1 : Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D6878 / D6878M – 13 : Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
ASTM D6880 / D6880M – 11 : Standard Specification for Wood Boxes
ASTM D6881 / D6881M – 03(2013) : Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
ASTM D6883 – 04(2012) : Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
ASTM D6884 – 03(2010) : Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
ASTM D6886 – 12 : Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
ASTM D6887 – 03(2013) : Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
ASTM D6888 – 09 : Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D6889 – 03(2011) : Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
ASTM D6890 – 13be1 : Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D6891 – 14 : Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
ASTM D6892 – 03(2014) : Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
ASTM D6894 – 13 : Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D6895 – 06(2012) : Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C
ASTM D6896 – 12 : Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6897 – 09 : Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
ASTM D6898 – 03(2010) : Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
ASTM D69 – 12 : Standard Test Methods for Friction Tapes
ASTM D6900 – 10 : Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
ASTM D6901 – 06 : Standard Specification for Artists’ Colored Pencils
ASTM D6902 – 04(2011) : Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D6903 – 07(2013) : Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
ASTM D6904 – 03(2013) : Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
ASTM D6905 – 03(2012) : Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6906 – 12a : Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6907 – 05(2010) : Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
ASTM D6908 – 06(2010) : Standard Practice for Integrity Testing of Water Filtration Membrane Systems
ASTM D6909 – 10 : Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
ASTM D6910 / D6910M – 09 : Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
ASTM D6911 – 03(2010) : Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM D6913 – 04(2009) : Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6914 – 04(2010) : Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
ASTM D6915 – 12 : Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks
ASTM D6916 – 06c(2011) : Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
ASTM D6917 – 03(2011) : Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
ASTM D6918 – 09(2014)e1 : Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D6919 – 09 : Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
ASTM D692 / D692M – 09 : Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
ASTM D6920 – 13 : Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
ASTM D6922 – 13 : Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
ASTM D6923 – 14 : Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
ASTM D6924 – 03(2012) : Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
ASTM D6925 – 09 : Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D6926 – 10 : Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
ASTM D6927 – 06 : Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
ASTM D6928 – 10 : Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D6929 – 10 : Standard Practice for Freezing of Emulsified Asphalts
ASTM D6930 – 10 : Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
ASTM D6931 – 12 : Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM D6932 / D6932M – 08(2013) : Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
ASTM D6933 – 13 : Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D6934 – 08 : Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM D6935 – 11 : Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
ASTM D6936 – 09 : Standard Test Method for Determining Demulsibility of Emulsified Asphalt
ASTM D6937 – 08 : Standard Test Method for Determining Density of Emulsified Asphalt
ASTM D6938 – 10 : Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6940 – 10 : Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
ASTM D6941 – 12 : Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
ASTM D6942 – 03(2012) : Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
ASTM D6943 – 10 : Standard Practice for Immersion Testing of Industrial Protective Coatings
ASTM D6944 – 09e1 : Standard Practice for Resistance of Cured Coatings to Thermal Cycling
ASTM D6945 / D6945M – 03(2011)e1 : Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
ASTM D6946 / D6946M – 13e1 : Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
ASTM D6947 / D6947M – 07(2013)e1 : Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D6948 / D6948M – 03(2011)e1 : Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
ASTM D695 – 10 : Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D6950 / D6950M – 04(2012)e1 : Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
ASTM D6951 / D6951M – 09 : Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6953 – 11 : Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
ASTM D6954 – 04(2013) : Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
ASTM D6956 – 11 : Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D6957 – 12 : Standard Practice for Measuring Curl in Paint Brush Filling Material
ASTM D6958 – 03(2009) : Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
ASTM D6959 – 08 : Standard Practice for Data Exchange Format for Sewn Product Plotting Devices
ASTM D696 – 08e1 : Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C with a Vitreous Silica Dilatometer
ASTM D6961 / D6961M – 09 : Standard Test Method for Color Measurement of Flax Fiber
ASTM D6962 – 12 : Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings
ASTM D6963 – 13 : Standard Terminology Relating to Sewn Products Automation
ASTM D6966 – 13 : Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D6968 – 03(2009) : Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
ASTM D6969 – 03(2008) : Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM D6970 – 03(2013)e1 : Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
ASTM D6971 – 09 : Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D6973 – 08e1 : Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D6974 – 09(2013) : Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D6975 – 04(2010) : Standard Test Method for Cummins M11 EGR Test
ASTM D6976 – 13 : Standard Specification for Rubber Contraceptives—Vaginal Diaphragms
ASTM D6977 – 04(2010) : Standard Specification for Polychloroprene Examination Gloves for Medical Application
ASTM D6978 – 05(2013) : Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
ASTM D6979 – 13 : Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
ASTM D698 – 12e1 : Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
ASTM D6980 – 12 : Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM D6982 – 09 : Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
ASTM D6984 – 14 : Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
ASTM D6986 – 03(2010) : Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM D6987 / D6987M – 13a : Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
ASTM D6988 – 13 : Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D6989 – 03(2013) : Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
ASTM D6990 – 05(2011) : Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
ASTM D6991 – 05(2010) : Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D6992 – 03(2009) : Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6994 – 10 : Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
ASTM D6995 – 05(2013) : Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
ASTM D6997 – 12 : Standard Test Method for Distillation of Emulsified Asphalt
ASTM D6998 – 11 : Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
ASTM D6999 – 12 : Standard Practice for Miscibility of Emulsified Asphalts
ASTM D70 – 09e1 : Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D7000 – 11 : Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
ASTM D7001 – 06(2011) : Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM D7002 – 10 : Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System
ASTM D7003 / D7003M – 03(2013)e1 : Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
ASTM D7004 / D7004M – 03(2013)e1 : Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
ASTM D7005 – 03(2008) : Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D7006 – 03(2013) : Standard Practice for Ultrasonic Testing of Geomembranes
ASTM D7007 – 09 : Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials
ASTM D7008 – 08(2013) : Standard Specification for Geosynthetic Alternate Daily Covers
ASTM D7011 – 10a : Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM D7012 – 14 : Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM D7013 / D7013M – 11 : Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
ASTM D7014 – 10 : Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
ASTM D7015 – 13 : Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
ASTM D7016 / D7016M – 09e1 : Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame
ASTM D7017 – 14 : Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics
ASTM D7018 / D7018M – 12 : Standard Terminology Relating to Glass Fiber and Its Products
ASTM D7019 – 14 : Standard Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics
ASTM D7020 – 14 : Standard Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics
ASTM D7021 – 14 : Standard Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics
ASTM D7022 – 13 : Standard Terminology Relating to Apparel
ASTM D7023 – 06(2012) : Standard Terminology Relating to Home Furnishings
ASTM D7025 – 09 : Standard Test Method for Assessing Clean Flax Fiber Fineness
ASTM D7026 – 13 : Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis
ASTM D7027 – 13 : Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM D7028 – 07e1 : Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D7029 – 09 : Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]
ASTM D7030 – 04(2009) : Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM D7031 – 11 : Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
ASTM D7032 – 10a : Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
ASTM D7033 – 14 : Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
ASTM D7034 – 11 : Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
ASTM D7035 – 10 : Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7036 – 12 : Standard Practice for Competence of Air Emission Testing Bodies
ASTM D7038 – 13 : Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
ASTM D7039 – 13 : Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D704 – 99(2012) : Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM D7040 – 04(2010) : Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D7041 – 04(2010)e1 : Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
ASTM D7042 – 12a : Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7043 – 12 : Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM D7044 – 04a(2010) : Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
ASTM D7045 – 04(2010) : Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
ASTM D7046 – 11 : Standard Guide for Use of the Metal Detection Method for Subsurface Exploration
ASTM D7047 – 12 : Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium)
ASTM D7048 – 04(2010) : Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
ASTM D7049 – 04(2010) : Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres
ASTM D705 – 99(2012) : Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM D7050 – 04(2014) : Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties
ASTM D7051 – 05(2013) : Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
ASTM D7053 / D7053M – 11 : Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
ASTM D7054 – 04(2013) : Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
ASTM D7055 – 09 : Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
ASTM D7056 – 07(2012) : Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
ASTM D7057 – 13 : Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
ASTM D7058 – 04(2009) : Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D7059 – 09(2013) : Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
ASTM D706 – 09 : Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds
ASTM D7060 – 12 : Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM D7061 – 12 : Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
ASTM D7063 / D7063M – 11 : Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
ASTM D7064 / D7064M – 08(2013) : Standard Practice for Open-Graded Friction Course (OGFC) Mix Design
ASTM D7065 – 11 : Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert -Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
ASTM D7066 – 04(2011) : Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM D7067 – 05 : Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane
ASTM D7069 – 04(2010) : Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
ASTM D707 – 09 : Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds
ASTM D7070 – 08 : Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
ASTM D7072 – 04(2013) : Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
ASTM D7073 – 05(2012) : Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
ASTM D7076 – 10 : Standard Test Method for Measurement of Shives in Retted Flax
ASTM D7078 / D7078M – 12 : Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7082 – 04(2010) : Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
ASTM D7083 – 04(2010)e1 : Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
ASTM D7084 – 04(2009) : Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7085 – 04(2010)e1 : Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D7087 – 05a(2010) : Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
ASTM D7088 – 08 : Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
ASTM D7089 – 06 : Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
ASTM D709 – 13 : Standard Specification for Laminated Thermosetting Materials
ASTM D7090 – 04(2010) : Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
ASTM D7091 – 13 : Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D7093 – 13 : Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
ASTM D7094 – 12e1 : Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D7095 – 04(2009) : Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7096 – 10 : Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM D7097 – 09 : Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
ASTM D7098 – 08e1 : Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7099 – 04(2010) : Standard Terminology Relating to Frozen Soil and Rock
ASTM D71 – 94(2009) : Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
ASTM D710 – 13 : Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
ASTM D7100 – 11 : Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM D7101 – 13 : Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
ASTM D7102 – 10 : Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
ASTM D7103 – 06(2013) : Standard Guide for Assessment of Medical Gloves
ASTM D7105 – 06(2013) : Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
ASTM D7106 – 05(2010) : Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
ASTM D7107 – 04(2010) : Standard Test Method for Creep Measurement of Self-Lubricating Bushings
ASTM D7108 – 12 : Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
ASTM D7109 – 12 : Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
ASTM D711 – 10 : Standard Test Method for No-Pick-Up Time of Traffic Paint
ASTM D7110 – 05a(2011) : Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7111 – 11 : Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7112 – 12 : Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7113 / D7113M – 10 : Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
ASTM D7115 – 10 : Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
ASTM D7119 / D7119M – 13a : Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
ASTM D7120 / D7120M – 10 : Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
ASTM D7121 – 05(2012) : Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
ASTM D7122 – 11 : Standard Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)
ASTM D7123 – 11 : Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl2H, Ar, and CF4)
ASTM D7124 – 12 : Standard Specification for Benzene for Use with Zeolite Based Catalysts
ASTM D7125 – 11 : Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
ASTM D7126 – 10 : Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM D7127 – 13 : Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM D7128 – 05(2010) : Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
ASTM D7129 – 09 : Standard Test Method for Determination of Ammonia Trapping in a Grafted Battery Separator
ASTM D713 – 12 : Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
ASTM D7131 – 09 : Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator
ASTM D7132 – 14 : Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
ASTM D7133 – 11 : Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D7134 – 05(2012) : Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM D7136 / D7136M – 12 : Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D7137 / D7137M – 12 : Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D7138 – 08 : Standard Test Method to Determine Melting Temperature of Synthetic Fibers
ASTM D7139 – 09(2013)e1 : Standard Terminology for Cotton Fibers
ASTM D714 – 02(2009) : Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D7140 / D7140M – 13 : Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials
ASTM D7142 – 05(2011) : Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners
ASTM D7143 – 11 : Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
ASTM D7144 – 05a(2011) : Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM D7145 – 05(2010)e1 : Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
ASTM D7147 – 11 : Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
ASTM D7148 – 13 : Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
ASTM D7149 – 05(2011)e1 : Standard Practice for Determining the Freeze Thaw Stability of Adhesives
ASTM D715 – 86(2008) : Standard Test Methods for Analysis of Barium Sulfate Pigment
ASTM D7150 – 13 : Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress
ASTM D7151 – 13 : Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7152 – 11 : Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
ASTM D7153 – 05(2010) : Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D7154 – 05(2010) : Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D7155 – 11 : Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ASTM D7156 – 13 : Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ASTM D7157 – 12 : Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
ASTM D7158 / D7158M – 11 : Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)
ASTM D716 – 86(2012) : Standard Test Methods for Evaluating Mica Pigment
ASTM D7160 – 05(2010) : Standard Practice for Determination of Expiration Dating for Medical Gloves
ASTM D7161 – 05(2010) : Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
ASTM D7163 – 11 : Standard Test Method for Specular Gloss of Printed Matter
ASTM D7164 – 10 : Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D7165 – 10 : Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
ASTM D7166 – 10 : Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
ASTM D7167 – 12 : Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
ASTM D7168 – 11e1 : Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
ASTM D7169 – 11 : Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D717 – 86(2008) : Standard Test Methods for Analysis of Magnesium Silicate Pigment
ASTM D7170 – 14 : Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D7171 – 05(2011) : Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ASTM D7172 – 06e1 : Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM D7173 – 11 : Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
ASTM D7174 – 05(2011) : Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM D7175 – 08 : Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7176 – 06(2011) : Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
ASTM D7177 – 05(2010) : Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
ASTM D7178 – 06(2011) : Standard Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property
ASTM D7179 – 07(2013) : Standard Test Method for Determining Geonet Breaking Force
ASTM D718 – 86(2008) : Standard Test Methods for Analysis of Aluminum Silicate Pigment
ASTM D7180 / D7180M – 05(2013)e1 : Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
ASTM D7181 – 11 – Method for Consolidated Drained Triaxial Compression Test for Soils
ASTM D7183 – 12 : Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM D7184 – 13 : Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7185 – 12 : Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
ASTM D7186 – 12 : Standard Practice for Quality Assurance Observation of Roof Construction and Repair
ASTM D7187 – 10 : Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM D7188 – 05(2010) : Standard Terminology for Printing Inks, Materials, and Processes
ASTM D7189 – 12 : Standard Test Method for Relative Mileage of News Ink on Newsprint
ASTM D7190 – 10(2011) : Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
ASTM D7191 – 10 : Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
ASTM D7192 – 10 : Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
ASTM D7193 – 11 : Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D7194 – 12 : Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
ASTM D7195 – 06(2012) : Standard Guide for Protocol for Setting Color Specifications for a Material
ASTM D7196 – 12 : Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples
ASTM D7197 – 13 : Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)
ASTM D7198 – 05(2012) : Standard Specification for Disposable Embalming Gloves for Single-Use Applications
ASTM D7199 – 07(2012) : Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models
ASTM D720 – 91(2010) : Standard Test Method for Free-Swelling Index of Coal
ASTM D7200 – 12 : Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
ASTM D7201 – 06(2011) : Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
ASTM D7202 – 14 : Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D7203 – 11 : Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor
ASTM D7204 – 07 : Standard Practice for Sampling Waste Streams on Conveyors
ASTM D7205 / D7205M – 06(2011) : Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D7206 / D7206M – 06(2013)e1 : Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D7208 – 14 : Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM D7209 – 06 : Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products
ASTM D721 – 06(2011) : Standard Test Method for Oil Content of Petroleum Waxes
ASTM D7210 – 13 : Standard Practice for Extraction of Additives in Polyolefin Plastics
ASTM D7211 – 13 : Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
ASTM D7212 – 13 : Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
ASTM D7213 – 12e1 : Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography
ASTM D7214 – 07a(2012) : Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7215 – 08(2013) : Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM D7216 – 13 : Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
ASTM D7217 – 11 : Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7219 – 08 : Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
ASTM D7220 – 12 : Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D7223 – 11 : Standard Specification for Aviation Certification Turbine Fuel
ASTM D7224 – 13 : Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D7225 – 13 : Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
ASTM D7226 – 13 : Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM D7227 / D7227M – 11e1 : Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
ASTM D7228 – 06a(2011) : Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM D7229 – 08(2013)e1 : Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D7230 – 06(2013) : Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates
ASTM D7232 – 06(2012) : Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
ASTM D7233 – 08(2012) : Standard Test Method for Testing Fracture of Level Paintbrush Filaments
ASTM D7234 – 12 : Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7235 – 10 : Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7236 – 07(2013) : Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D7237 – 10 : Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D7238 – 06(2012) : Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D7239 – 13 : Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
ASTM D7240 – 06(2011) : Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
ASTM D7241 – 13 : Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering
ASTM D7242 / D7242M – 06(2013)e1 : Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
ASTM D7243 – 11 : Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
ASTM D7244 – 06a(2011) : Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
ASTM D7245 – 09 : Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
ASTM D7246 – 06(2011)e1 : Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
ASTM D7247 – 07ae1 : Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D7248 / D7248M – 12 : Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D7249 / D7249M – 12e1 : Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7250 / D7250M – 06(2012) : Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM D7251 – 11 : Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
ASTM D7252 – 06(2011)e1 : Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
ASTM D7253 – 06(2011)e1 : Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
ASTM D7254 – 07 : Standard Specification for Polypropylene (PP) Siding
ASTM D7255 – 14 : Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
ASTM D7257 – 06(2011) : Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
ASTM D7258 – 14 : Standard Specification for Polymeric Piles
ASTM D7260 – 12 : Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7261 – 13 : Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D7262 – 10 : Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
ASTM D7263 – 09 : Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7264 / D7264M – 07 : Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7265 – 12 : Standard Specification for Hydrogen Thermophysical Property Tables
ASTM D7266 – 13e1 : Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM D7267 – 13 : Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
ASTM D7268 – 14 : Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear
ASTM D7269 / D7269M – 11 : Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM D7270 – 07(2013) : Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
ASTM D7271 – 06(2012) : Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D7272 – 06(2011) : Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
ASTM D7273 / D7273M – 08(2013)e1 : Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM D7274 – 06a(2011) : Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
ASTM D7275 – 07(2012) : Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)
ASTM D7276 – 08 : Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
ASTM D7277 – 08 : Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
ASTM D7278 – 11 : Standard Guide for Prediction of Analyzer Sample System Lag Times
ASTM D7279 – 08 : Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7280 – 06(2011) : Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
ASTM D7281 – 07(2013) : Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
ASTM D7282 – 06 : Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
ASTM D7283 – 13 : Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
ASTM D7284 – 13 : Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
ASTM D7285 – 06(2010) : Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
ASTM D7290 – 06(2011) : Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
ASTM D7291 / D7291M – 07 : Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7292 – 12 : Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
ASTM D7293 – 12 : Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
ASTM D7294 – 13 : Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest
ASTM D7295 – 11 : Standard Practice for Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources
ASTM D7296 – 12 : Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
ASTM D7297 – 14 : Standard Practice for Evaluating Residential Indoor Air Quality Concerns
ASTM D7298 – 06(2011)e1 : Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D7299 – 12 : Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
ASTM D7300 – 11 : Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM D7301 – 11 : Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
ASTM D7303 – 12 : Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D7304 – 14 : Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
ASTM D7305 – 08a(2013) : Standard Test Method for Reflection Density of Printed Matter
ASTM D7306 – 07(2013) : Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
ASTM D7307 – 06(2011) : Standard Practice for Sampling of Thermoplastic Traffic Marking Materials
ASTM D7308 – 07(2012) : Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM D7309 – 13 : Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM D731 – 10 : Standard Test Method for Molding Index of Thermosetting Molding Powder
ASTM D7310 – 11 : Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
ASTM D7312 – 10 : Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
ASTM D7313 – 13 : Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM D7314 – 10 : Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM D7315 – 12 : Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM D7316 – 06 : Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions
ASTM D7317 – 07(2013) : Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ASTM D7318 – 13 : Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D7319 – 13 : Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D732 – 10 : Standard Test Method for Shear Strength of Plastics by Punch Tool
ASTM D7320 – 13 : Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
ASTM D7321 – 11e1 : Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D7322 – 13a : Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
ASTM D7323 – 13 : Standard Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)
ASTM D7324 – 13 : Standard Practice for Handling, Transportation, and Storage of IG-55 Ar N2
ASTM D7325 – 13 : Standard Practice for Handling, Transportation, and Storage of IG-541 N2, Ar , CO2
ASTM D7326 – 12 : Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF3, CHF2 CF3, and CO2)
ASTM D7327 – 12 : Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)
ASTM D7328 – 13 : Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D7329 – 07(2012) : Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
ASTM D7330 – 11e1 : Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM D7331 – 11 : Standard Practice for Sewn Products Marker Data Interchange
ASTM D7332 / D7332M – 09 : Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7334 – 08(2013) : Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
ASTM D7336 / D7336M – 12 : Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
ASTM D7337 / D7337M – 12 : Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D7338 – 10 : Standard Guide for Assessment Of Fungal Growth in Buildings
ASTM D7339 – 12 : Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
ASTM D7340 – 07(2012)e1 : Standard Practice for Thermal Conductivity of Leather
ASTM D7341 – 14 : Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
ASTM D7342 – 07 : Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
ASTM D7343 – 12 : Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7344 – 11a : Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D7345 – 08 : Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
ASTM D7346 – 14 : Standard Test Method for No Flow Point and Pour Point of Petroleum Products
ASTM D7347 – 07e1 : Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
ASTM D7348 – 13 : Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
ASTM D7349 / D7349M – 11 : Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
ASTM D7351 – 13 : Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
ASTM D7352 – 07(2012) : Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
ASTM D7353 – 07(2013) : Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
ASTM D7354 – 11 : Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings
ASTM D7355 – 10 : Standard Guide for Artists’ Paint Waste Disposal in Smaller Commercial or Educational Settings
ASTM D7356 / D7356M – 13 : Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
ASTM D7357 – 07(2012) : Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete
ASTM D7358 – 07(2013) : Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
ASTM D7359 – 13 : Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D7360 – 11 : Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
ASTM D7361 – 07(2012) : Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D7362 – 07 : Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition
ASTM D7363 – 13a : Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
ASTM D7365 – 09a : Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
ASTM D7366 – 08(2013) : Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
ASTM D7367 – 14 : Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
ASTM D7369 – 11 : Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM D737 – 04(2012) : Standard Test Method for Air Permeability of Textile Fabrics
ASTM D7370 – 09 : Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
ASTM D7371 – 12 : Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM D7372 – 12 : Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM D7373 – 12 : Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
ASTM D7374 – 08 : Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
ASTM D7375 – 08 : Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration
ASTM D7376 – 10a : Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D7377 – 09(2013) : Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
ASTM D7378 – 10 : Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
ASTM D7379 – 08 : Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
ASTM D7380 – 08 : Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
ASTM D7381 – 07(2013) : Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
ASTM D7382 – 08 : Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
ASTM D7383 – 10 : Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
ASTM D7385 – 13 : Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion
ASTM D7386 – 12 : Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
ASTM D7387 – 13 : Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
ASTM D7388 – 08(2013) : Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
ASTM D7389 – 07(2012) : Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes
ASTM D7390 – 07(2012) : Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM D7391 – 09 : Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D7392 – 07 : Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
ASTM D7393 – 07(2012) : Standard Practice for Indicating Oil in Abrasives
ASTM D7394 – 13 : Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
ASTM D7395 – 07(2012) : Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
ASTM D7396 – 08 : Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM D7397 – 10 : Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
ASTM D7398 – 11 : Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615°C by Gas Chromatography
ASTM D7399 – 08 : Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM D740 – 11 : Standard Specification for Methyl Ethyl Ketone
ASTM D7400 – 08 : Standard Test Methods for Downhole Seismic Testing
ASTM D7401 – 08 : Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM D7402 – 09 : Standard Practice for Identifying Cationic Emulsified Asphalts
ASTM D7403 – 09 : Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
ASTM D7404 – 07(2012) : Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7405 – 10a : Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7406 – 07(2012) : Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
ASTM D7407 – 07(2012) : Standard Guide for Determining The Transmission of Gases Through Geomembranes
ASTM D7408 – 12 : Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
ASTM D7409 – 07e1 : Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
ASTM D7410 – 07(2012) : Standard Practice for Qualification of Cotton Classification Instruments for Cotton Marketing
ASTM D7412 – 09 : Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7414 – 09 : Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7415 – 09 : Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7416 – 09 : Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome
ASTM D7417 – 10 : Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D7418 – 12 : Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D7419 – 13 : Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
ASTM D7420 – 11 : Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7421 – 11 : Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7422 – 14 : Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
ASTM D7423 – 09 : Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D7425 / D7425M – 13 : Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
ASTM D7426 – 08(2013) : Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
ASTM D7427 – 08e2 : Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex
ASTM D7428 – 08e1 : Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D7430 – 14 : Standard Practice for Mechanical Sampling of Coal
ASTM D7433 – 13 : Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
ASTM D7434 – 08 : Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads
ASTM D7435 – 08 : Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers
ASTM D7436 – 12 : Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D7437 – 08(2013) : Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
ASTM D7438 – 13 : Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM D7439 – 14 : Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM D7440 – 08 : Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM D7441 – 08(2013) : Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples
ASTM D7442 – 08a : Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy
ASTM D7444 – 11 : Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
ASTM D7445 – 09 : Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
ASTM D7446 – 09 : Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
ASTM D7447 – 08(2014) : Standard Practice for Symbolizing Adhesive Applications
ASTM D7448 – 09 : Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
ASTM D7449 / D7449M – 08e1 : Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
ASTM D7450 – 13 : Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
ASTM D7451 – 08a(2013) : Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
ASTM D7452 – 12 : Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM D7453 – 09 : Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
ASTM D7454 – 14 : Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7455 – 14 : Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D7457 – 12 : Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
ASTM D7458 – 14 : Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
ASTM D7459 – 08 : Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
ASTM D746 – 13 : Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D7460 – 10 : Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
ASTM D7462 – 11 : Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)
ASTM D7463 – 14 : Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures and Fuel Associated Water
ASTM D7464 – 08(2013) : Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D7465 – 08 : Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
ASTM D7466 – 10 : Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM D7467 – 13 : Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D7468 – 13 : Standard Test Method for Cummins ISM Test
ASTM D7469 – 12 : Standard Test Methods for End-Joints in Structural Wood Products
ASTM D747 – 10 : Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D7470 – 08 : Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs
ASTM D7471 – 09(2014) : Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
ASTM D7472 – 09(2014) : Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
ASTM D7473 – 12 : Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations
ASTM D7474 – 12 : Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
ASTM D7475 – 11 : Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
ASTM D7476 – 08(2013) : Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
ASTM D7477 – 08(2013) : Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
ASTM D7478 / D7478M – 11 : Standard Specification for Heavy Duty Sheathed Wood Crates
ASTM D748 – 00(2011) : Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
ASTM D7480 – 08(2014) : Standard Guide for Evaluating the Attributes of a Forest Management Plan
ASTM D7481 – 09 : Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM D7482 – 08 : Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
ASTM D7483 – 13a : Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7484 – 13a : Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
ASTM D7485 – 09 : Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D7486 – 08(2013)e1 : Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7487 – 13 : Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
ASTM D7488 – 11 : Standard Test Method for Open Time of Latex Paints
ASTM D7489 – 09(2013) : Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
ASTM D7490 – 13 : Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D7491 – 08 : Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
ASTM D7492 / D7492M – 11 : Standard Guide for Use of Drainage System Media with Waterproofing Systems
ASTM D7493 – 08 : Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D7495 – 12 : Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials
ASTM D7496 – 11 : Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
ASTM D7497 – 09 : Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique
ASTM D7498 / D7498M – 09(2014)e1 : Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test
ASTM D7499 / D7499M – 09 : Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
ASTM D75 / D75M – 14 : Standard Practice for Sampling Aggregates
ASTM D750 – 12 : Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D7500 – 12 : Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 to 735°C by Gas Chromatography
ASTM D7501 – 12a : Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D7503 – 10 : Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
ASTM D7504 – 12 : Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7505 / D7505M – 10 : Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
ASTM D7506 / D7506M – 12 : Standard Test Method for Pocket Reinforcement
ASTM D7507 – 14 : Standard Specification for Woven High Stretch Fabrics Used in Apparel
ASTM D7508 / D7508M – 10 : Standard Specification for Polyolefin Chopped Strands for Use in Concrete
ASTM D7509 – 09 : Standard Specification for Fluorocarbon Feedstock Grade Chloroform
ASTM D751 – 06(2011) : Standard Test Methods for Coated Fabrics
ASTM D7510 – 10 : Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
ASTM D7511 – 12 : Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7512 – 09 : Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
ASTM D7513 – 09 : Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
ASTM D7514 – 14 : Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
ASTM D7515 – 09(2014) : Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
ASTM D7517 – 09(2014) : Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
ASTM D7518 – 10 : Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
ASTM D7519 – 11 : Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting
ASTM D7520 – 13 : Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D7521 – 13 : Standard Test Method for Determination of Asbestos in Soil
ASTM D7522 / D7522M – 09 : Standard Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate
ASTM D7524 – 10 : Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
ASTM D7525 – 09 : Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
ASTM D7527 – 10 : Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
ASTM D7528 – 13 : Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D7530 / D7530M – 10 : Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
ASTM D7532 – 09 : Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
ASTM D7535 – 09e1 : Standard Test Method for Lead-210 in Water
ASTM D7536 – 09 : Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D7538 – 09(2013) : Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
ASTM D7539 – 10 : Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
ASTM D7540 – 09(2013) : Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
ASTM D7541 – 11 : Standard Practice for Estimating Critical Surface Tensions
ASTM D7542 – 09 : Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
ASTM D7544 – 12 : Standard Specification for Pyrolysis Liquid Biofuel
ASTM D7545 – 14 : Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
ASTM D7546 – 09 : Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
ASTM D7547 – 14 : Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D7548 – 09 : Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
ASTM D7549 – 14 : Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
ASTM D7550 – 09 : Standard Test Method for Determination of Ammonium, Alkali and Alkaline Earth Metals in Hydrogen and Other Cell Feed Gases by Ion Chromatography
ASTM D7551 – 10 : Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
ASTM D7552 – 09 : Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
ASTM D7553 – 10 : Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
ASTM D7556 – 10 : Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
ASTM D7557 / D7557M – 09(2013)e1 : Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
ASTM D7558 – 09 : Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
ASTM D7559 / D7559M – 09 : Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions
ASTM D7563 – 10 : Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
ASTM D7564 / D7564M – 09 : Standard Practice for Construction of Asphalt-Rubber Cape Seal
ASTM D7565 / D7565M – 10 : Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
ASTM D7566 – 14a : Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D7567 – 09 : Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction
ASTM D7568 – 13 : Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
ASTM D7569 – 10 : Standard Practice for Determination of Gas Content of Coal-Direct Desorption Method
ASTM D7570 – 09 : Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
ASTM D7571 – 10 : Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
ASTM D7572 – 13 : Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil
ASTM D7573 – 09 : Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM D7574 – 09 : Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D7575 – 11 : Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM D7576 – 10 : Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
ASTM D7577 – 12 : Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM D7578 – 10e1 : Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7579 – 09(2013) : Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D7580 / D7580M – 09 : Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads
ASTM D7582 – 12 : Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D7583 – 09 : Standard Test Method for John Deere Coolant Cavitation Test
ASTM D7584 – 10 : Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue to the Growth of Fungi in an Environmental Chamber
ASTM D7585 / D7585M – 10 : Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
ASTM D7586 / D7586M – 11 : Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies
ASTM D7588 – 11 : Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer’s Container
ASTM D7589 – 14 : Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
ASTM D7590 – 09e1 : Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
ASTM D7591 – 12 : Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D7592 – 14 : Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
ASTM D7593 – 13 : Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM D7594 – 11 : Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7596 – 10 : Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D7597 – 09e2 : Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chro
ASTM D7598 – 09e2 : Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
ASTM D7599 – 09e2 : Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Sp
ASTM D76 / D76M – 11 : Standard Specification for Tensile Testing Machines for Textiles
ASTM D7600 – 09e3 : Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D7601 – 10 : Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
ASTM D7602 – 11 : Standard Practice for Installation of Vulcanized Rubber Linings
ASTM D7603 – 13 : Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
ASTM D7605 – 11 : Standard Test Method for Thermoplastic Elastomers – Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7606 – 11 : Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
ASTM D7607 / D7607M – 11e1 : Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
ASTM D7608 – 10 : Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
ASTM D7611 / D7611M – 13 : Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
ASTM D7612 – 10 : Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
ASTM D7613 – 10 : Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
ASTM D7614 – 12 : Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
ASTM D7615 / D7615M – 11 : Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM D7616 / D7616M – 11 : Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM D7617 / D7617M – 11 : Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
ASTM D7618 – 13 : Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
ASTM D7619 – 12b : Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7620 – 10 : Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM D7621 – 13 : Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
ASTM D7622 – 10e1 : Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D7623 – 10 : Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D7624 – 10 : Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7625 – 10 : Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
ASTM D7626 – 10 : Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
ASTM D763 – 06(2012) : Standard Specification for Raw and Burnt Umber Pigments
ASTM D7633 – 13 : Standard Test Method for Carbon Black—Carbon Content
ASTM D7634 – 10 : Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM D7635 / D7635M – 10 : Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
ASTM D7636 / D7636M – 11 : Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
ASTM D7637 – 10 : Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM D7638 – 10 : Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
ASTM D7639 – 10 : Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D7640 – 11 : Standard Specification for Engine Coolant Grade Glycerin
ASTM D7641 – 10 : Standard Guide for Textile Fibers
ASTM D7642 – 12 : Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments
ASTM D7643 – 10 : Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
ASTM D7644 – 10e2 : Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D7645 – 14 : Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D7646 – 10 : Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7647 – 10 : Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
ASTM D7648 – 12 : Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
ASTM D7649 – 10 : Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis
ASTM D765 – 87(2009) : Standard Specification for Raw and Burnt Sienna Pigments
ASTM D7650 – 13 : Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
ASTM D7651 – 10 : Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D7652 – 11 : Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection
ASTM D7653 – 10 : Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
ASTM D7654 / D7654M – 10 : Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM D7655 / D7655M – 12 : Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
ASTM D7659 – 10 : Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
ASTM D7660 – 10 : Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
ASTM D7661 – 10 : Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
ASTM D7662 – 13 : Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D7663 – 12 : Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
ASTM D7664 – 10 : Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
ASTM D7665 – 10 : Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
ASTM D7666 – 12 : Standard Specification for Triglyceride Burner Fuel
ASTM D7667 – 10e2 : Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
ASTM D7668 – 14a : Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D7669 – 11 : Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM D7670 – 10 : Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM D7671 – 10e1 : Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
ASTM D7672 – 13 : Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
ASTM D7673 / D7673M – 10e2 : Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)
ASTM D7674 – 14 : Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
ASTM D7675 – 11 : Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
ASTM D7677 – 11 : Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
ASTM D7678 – 11 : Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
ASTM D7679 – 13 : Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
ASTM D768 – 01(2012) : Standard Specification for Yellow Iron Oxide Hydrated
ASTM D7680 – 10 : Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
ASTM D7681 – 11 : Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D7682 – 12 : Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
ASTM D7683 – 11 : Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)
ASTM D7684 – 11 : Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
ASTM D7685 – 11 : Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings
ASTM D7686 – 11 : Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM D7687 – 11 : Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration
ASTM D7688 – 11 : Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
ASTM D7689 – 11 : Standard Test Method for Cloud Point of Petroleum Products (Mini Method)
ASTM D769 – 01(2012) : Standard Specification for Black Synthetic Iron Oxide
ASTM D7690 – 11 : Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM D7691 – 11 : Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7698 – 11a : Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
ASTM D7699 / D7699M – 11 : Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
ASTM D770 – 11 : Standard Specification for Isopropyl Alcohol
ASTM D7700 – 12 : Standard Guide for Selecting Test Methods for Geomembrane Seams
ASTM D7701 – 11 : Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
ASTM D7702 / D7702M – 14 : Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics
ASTM D7703 – 11 : Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System
ASTM D7704 – 12 : Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
ASTM D7705 / D7705M – 12 : Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
ASTM D7706 – 11 : Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
ASTM D7707 – 11 : Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
ASTM D7708 – 14 : Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM D7709 – 12 : Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
ASTM D7711 – 11e1 : Standard Guide for Description of Polymer Pellet Defects
ASTM D7712 – 11 : Standard Terminology for Sampling and Analysis of Asbestos
ASTM D7713 – 12 : Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)
ASTM D7714 – 11 : Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
ASTM D7715 – 12 : Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
ASTM D7716 – 11a : Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
ASTM D7717 – 11 : Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
ASTM D7718 – 11 : Standard Practice for Obtaining In-Service Samples of Lubricating Grease
ASTM D7719 – 14 : Standard Specification for High-Octane Unleaded Fuel
ASTM D772 – 86(2011) : Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D7720 – 11 : Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
ASTM D7721 – 11 : Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
ASTM D7722 – 13 : Standard Terminology Relating to Industrial Textile Stitches and Seams
ASTM D7723 – 11 : Standard Test Method for Rubber Property – Macro-Dispersion of Fillers in Compounds
ASTM D7724 – 11 : Standard Test Method for Carbon Black – Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D7725 – 12 : Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
ASTM D7726 – 11 : Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
ASTM D7727 – 11e1 : Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant
ASTM D7728 – 11 : Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
ASTM D7729 – 12 : Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
ASTM D7730 – 11 : Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D7731 – 11e1 : Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D7733 – 12 : Standard Specification for Acrylic Dispersion Ground
ASTM D7734 / D7734M – 13 : Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method
ASTM D7735 – 11e1 : Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
ASTM D7736 – 12 : Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM D7737 – 11 : Standard Test Method for Individual Geogrid Junction Strength
ASTM D7739 – 11 : Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
ASTM D7740 – 11 : Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
ASTM D7741 / D7741M – 11e1 : Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer
ASTM D7742 – 11 : Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 = n = 18) and Octylphenol Polyethoxylates (OPnEO, 2 = n = n = 12 in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spe
ASTM D7743 – 12 : Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
ASTM D7744 / D7744M – 11 : Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes
ASTM D7745 – 11 : Standard Practice for Testing Pultruded Composites
ASTM D7746 – 11 : Standard Practice for ?Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
ASTM D7747 / D7747M – 11e1 : Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
ASTM D7748 / D7748M – 14 : Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
ASTM D7749 – 11 : Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
ASTM D7750 – 12 : Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D7751 – 12 : Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D7752 – 11 : Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
ASTM D7753 – 12 : Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
ASTM D7754 – 11 : Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
ASTM D7755 – 11 : Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7756 – 13 : Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D7757 – 12 : Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D7758 – 11 : Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
ASTM D7759 – 12a : Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
ASTM D7760 – 12 : Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter
ASTM D7762 – 11 : Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
ASTM D7764 – 12 : Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
ASTM D7765 – 12 : Standard Practice for Use of Foundry Sand in Structural Fill and Embankments
ASTM D7766 / D7766M – 11 : Standard Practice for Damage Resistance Testing of Sandwich Constructions
ASTM D7767 – 11 : Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
ASTM D7768 – 12 : Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
ASTM D7770 – 12 : Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
ASTM D7771 – 13 : Standard Test Method for Determination of Benzo-a-Pyrene (BaP) Content in Carbon Black
ASTM D7772 – 11 : Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract
ASTM D7773 – 12 : Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography
ASTM D7774 – 12 : Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D7775 – 11e1 : Standard Guide for Measurements on Small Graphite Specimens
ASTM D7776 – 12 : Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories
ASTM D7777 – 13 : Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
ASTM D7778 – 12 : Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D7779 – 11 : Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM D7780 – 12 : Standard Practice for Geospatial Data for Representing Coal Mining Features
ASTM D7781 – 14 : Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase
ASTM D7782 – 13 : Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
ASTM D7783 – 13 : Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
ASTM D7784 – 12 : Standard Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry
ASTM D7785 – 12 : Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
ASTM D7786 – 13 : Standard Test Method for Determining Enamel Holdout
ASTM D7787 / D7787M – 13 : Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
ASTM D7789 – 12 : Standard Practice for Collection of Fungal Material from Surfaces by Swab
ASTM D7790 – 12 : Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing
ASTM D7791 – 12 : Standard Test Method for Uniaxial Fatigue Properties of Plastics
ASTM D7793 – 13 : Standard Specification for Insulated Vinyl Siding
ASTM D7794 – 12 : Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
ASTM D7795 – 12 : Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM D7796 – 12 : Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
ASTM D7797 – 12 – Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method
ASTM D7798 – 13 : Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538°C by Ultra Fast Gas Chromatography (UF GC)
ASTM D7799 – 12a : Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings
ASTM D7801 – 12 : Standard Terminology for Paint Brush Application Tools
ASTM D7802 – 12 : Standard Terminology for Paint Roller Application Tools
ASTM D7803 – 12 : Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
ASTM D7804 – 12 : Standard Test Method for Fiber Shedding of Paint Roller Covers
ASTM D7805 – 13 : Standard Terminology for Printing Ink Vehicles and Related Materials
ASTM D7806 – 12 : Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
ASTM D7807 – 12 : Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
ASTM D7808 – 12 : Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
ASTM D7811 – 13 : Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM D7815 – 12 : Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl)
ASTM D7816 – 12 : Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
ASTM D7817 – 12 : Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
ASTM D7818 – 12 : Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
ASTM D7819 – 12 : Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
ASTM D7820 – 12 : Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
ASTM D7821 – 12 : Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
ASTM D7822 – 13 : Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
ASTM D7823 – 13 : Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Chromatography
ASTM D7825 – 12 : Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer
ASTM D7826 – 13 : Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM D7827 – 12 : Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
ASTM D7828 – 12 : Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)
ASTM D7829 – 13e1 : Standard Guide for Sediment and Water Determination in Crude Oil
ASTM D7830 / D7830M – 13 : Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D7831 – 13 : Standard Practice for Sampling of Tanks by Field Personnel
ASTM D7833 – 14 : Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM D7834 – 13 : Standard Test Method for Filling Material Shedding of Paint Brushes
ASTM D7835 / D7835M – 13 : Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine
ASTM D7836 – 13 : Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
ASTM D7840 – 12 : Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
ASTM D7841 – 13 : Standard Practice for Sustainable Laundry Best Management Practices
ASTM D7842 / D7842M – 12 : Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons
ASTM D7843 – 12 : Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
ASTM D7844 – 12 : Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7845 – 13 : Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography – Mass Spectrometry
ASTM D7846 – 12 : Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
ASTM D7847 – 12 : Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM D7849 – 14 : Standard Classification for Nomenclature of Reference Materials of Committee D24
ASTM D785 – 08 : Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM D7850 – 13 : Standard Specification for Biological Properties of Industry Reference Materials (IRM)
ASTM D7852 – 13 : Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys
ASTM D7853 – 13 : Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
ASTM D7854 – 13 : Standard Test Method for Carbon Black-Void Volume at Mean Pressure
ASTM D7855 / D7855M – 13 : Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM D7856 – 14 : Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
ASTM D7858 – 13 : Standard Test Method for Determination of Bisphenol A in Soil, Sludge and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D7859 – 13e1 : Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
ASTM D7862 – 13 : Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
ASTM D7863 – 13 : Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
ASTM D7865 – 13 : Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels
ASTM D7866 – 14 : Standard Specification for Radiation Attenuating Protective Gloves
ASTM D7867 – 13 : Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
ASTM D7868 – 13 : Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
ASTM D7869 – 13 : Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
ASTM D787 – 12 : Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
ASTM D7870 / D7870M – 13 : Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
ASTM D7871 – 13 : Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
ASTM D7872 – 13 : Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM D7873 – 13e1 : Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method)
ASTM D7874 – 13 : Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
ASTM D7876 – 13 : Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
ASTM D7878 / D7878M – 13e1 : Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P
ASTM D7879 – 13 : Standard Test Method for Determining Flax Fiber Widths Using Image Analysis
ASTM D788 – 12 : Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D7880 / D7880M – 13 : Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag
ASTM D7881 – 13 : Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
ASTM D7882 – 13 : Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
ASTM D7883 – 13 : Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
ASTM D7884 – 13 : Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
ASTM D7887 – 13 : Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
ASTM D7888 – 13 : Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
ASTM D7889 – 13 : Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
ASTM D789 – 07e1 : Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
ASTM D7893 – 13 : Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
ASTM D7896 – 14 : Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM D7898 – 14 : Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
ASTM D7899 – 13 : Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method
ASTM D79 – 86(2009) : Standard Specification for Zinc Oxide Pigments
ASTM D790 – 10 : Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D7900 – 13 : Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
ASTM D7901 – 14 : Standard Specification for Dimethyl Ether for Fuel Purposes
ASTM D7903 – 14 : Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
ASTM D7906 – 14 : Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
ASTM D7907 – 14 : Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves
ASTM D7909 – 14 : Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes
ASTM D7912 – 14 : Standard Test Method for Resistance of Finish to Heat Aging (Finish Stability)
ASTM D7915 – 14 : Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
ASTM D7919 – 14 : Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
ASTM D792 – 13 : Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D8 – 13b : Standard Terminology Relating to Materials for Roads and Pavements
ASTM D800 – 05(2014) : Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
ASTM D801 – 02(2013) : Standard Test Methods for Sampling and Testing Dipentene
ASTM D802 – 02(2013) : Standard Test Methods for Sampling and Testing Pine Oils
ASTM D803 – 12 : Standard Test Methods for Testing Tall Oil
ASTM D804 – 12 : Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products
ASTM D806 – 11 : Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
ASTM D807 – 14 : Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
ASTM D808 – 11 : Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
ASTM D81 – 87(2008)e1 : Standard Specification for Basic Carbonate White Lead Pigment
ASTM D813 – 07(2014) : Standard Test Method for Rubber Deterioration—Crack Growth
ASTM D814 – 95(2010) : Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids
ASTM D816 – 06(2011) : Standard Test Methods for Rubber Cements
ASTM D817 – 12 : Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
ASTM D820 – 93(2009) : Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM D822 / D822M – 13 : Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D823 – 95(2012)e1 : Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
ASTM D83 – 84(2008)e1 : Standard Specification for Red Lead Pigment
ASTM D831 / D831M – 12 : Standard Test Method for Gas Content of Cable and Capacitor Oils
ASTM D832 – 07(2012) : Standard Practice for Rubber Conditioning For Low Temperature Testing
ASTM D841 – 13 : Standard Specification for Nitration Grade Toluene
ASTM D843 – 06(2011)e1 : Standard Specification for Nitration Grade Xylene
ASTM D847 – 08 : Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
ASTM D848 – 14 : Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
ASTM D849 – 11 : Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
ASTM D85 – 05(2011) : Standard Specification for Ochre Pigment
ASTM D850 – 11 : Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
ASTM D852 – 13 : Standard Test Method for Solidification Point of Benzene
ASTM D854 – 14 : Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D857 – 12 : Standard Test Method for Aluminum in Water
ASTM D858 – 12 : Standard Test Methods for Manganese in Water
ASTM D859 – 10 : Standard Test Method for Silica in Water
ASTM D86 – 12 : Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM D861 – 07(2013) : Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
ASTM D865 – 11 : Standard Test Method for Rubber – Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D868 – 10 : Standard Practice for Determination of Degree of Bleeding of Traffic Paint
ASTM D869 – 85(2011) : Standard Test Method for Evaluating Degree of Settling of Paint
ASTM D87 – 09 : Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D870 – 09 : Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ASTM D871 – 96(2010) : Standard Test Methods of Testing Cellulose Acetate
ASTM D873 – 12 : Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
ASTM D874 – 13a : Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
ASTM D876 – 13 : Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
ASTM D877 / D877M – 13 : Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D878 – 01(2006) : Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
ASTM D88 – 07(2013) : Standard Test Method for Saybolt Viscosity
ASTM D880 – 92(2008) : Standard Test Method for Impact Testing for Shipping Containers and Systems
ASTM D882 – 12 : Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D883 – 12 : Standard Terminology Relating to Plastics
ASTM D885 / D885M – 10a(2014) : Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers
ASTM D887 – 13 : Standard Practices for Sampling Water-Formed Deposits
ASTM D888 – 12e1 : Standard Test Methods for Dissolved Oxygen in Water
ASTM D889 – 13 : Standard Test Method for Volatile Oil in Rosin
ASTM D890 – 12 : Standard Test Method for Water in Liquid Pine Chemicals
ASTM D891 – 09 : Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D892 – 13 : Standard Test Method for Foaming Characteristics of Lubricating Oils
ASTM D893 – 14 : Standard Test Method for Insolubles in Used Lubricating Oils
ASTM D896 – 04(2010)e1 : Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
ASTM D897 – 08 : Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D899 – 00(2013) : Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D9 – 12 : Standard Terminology Relating to Wood and Wood-Based Products
ASTM D902 – 12 : Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
ASTM D903 – 98(2010) : Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D904 – 99(2013) : Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM D905 – 08(2013) : Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D906 – 98(2011) : Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D907 – 12a : Standard Terminology of Adhesives
ASTM D909 – 14 : Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D91 – 02(2012) : Standard Test Method for Precipitation Number of Lubricating Oils
ASTM D910 – 13a : Standard Specification for Aviation Gasolines
ASTM D913 – 10 : Standard Practice for Evaluating Degree of Traffic Paint Line Wear
ASTM D914 – 12 : Standard Test Methods for Ethylcellulose
ASTM D92 – 12b : Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D922 – 11 : Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
ASTM D923 – 07 : Standard Practices for Sampling Electrical Insulating Liquids
ASTM D924 – 08 : Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D925 – 14 : Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM D926 – 08(2013) : Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
ASTM D928 – 03(2009) : Standard Specification for Sodium Bicarbonate
ASTM D93 – 13e1 : Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D932 – 85(2009) : Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
ASTM D933 – 84(2012) : Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
ASTM D934 – 13 : Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D937 – 07(2012) : Standard Test Method for Cone Penetration of Petrolatum
ASTM D938 – 12 : Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
ASTM D94 – 07(2012) : Standard Test Methods for Saponification Number of Petroleum Products
ASTM D942 – 02(2007) : Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
ASTM D943 – 04a(2010)e1 : Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
ASTM D945 – 06(2012) : Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D946 / D946M – 09a : Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
ASTM D95 – 13e1 : Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D950 – 03(2011) : Standard Test Method for Impact Strength of Adhesive Bonds
ASTM D951 – 99(2010) : Standard Test Method for Water Resistance of Shipping Containers by Spray Method
ASTM D952 – 10 : Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D953 – 10 : Standard Test Method for Bearing Strength of Plastics
ASTM D955 – 08 : Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM D957 – 12 : Standard Practice for Determining Surface Temperature of Molds for Plastics
ASTM D962 – 81(2008)e1 : Standard Specification for Aluminum Powder and Paste Pigments for Paints
ASTM D964 – 03(2008)e1 : Standard Specification for Metallic Copper Powder for Use in Antifouling Paints
ASTM D968 – 05(2010) : Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D97 – 12 : Standard Test Method for Pour Point of Petroleum Products
ASTM D971 – 12 : Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
ASTM D972 – 02(2008) : Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
ASTM D974 – 12 : Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D975 – 14 : Standard Specification for Diesel Fuel Oils
ASTM D976 – 06(2011) : Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D977 – 13e1 : Standard Specification for Emulsified Asphalt
ASTM D979 / D979M – 12 : Standard Practice for Sampling Bituminous Paving Mixtures
ASTM D98 – 05(2013) : Standard Specification for Calcium Chloride
ASTM D982 – 05(2009) : Standard Test Method for Organic Nitrogen in Paper and Paperboard
ASTM D991 – 89(2010) : Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D994 / D994M – 11 : Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
ASTM D996 – 10a : Standard Terminology of Packaging and Distribution Environments
ASTM D999 – 08 : Standard Test Methods for Vibration Testing of Shipping Containers
ASTM E1 – 13 : Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM E10 – 12 : Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E100 – 10 : Standard Specification for ASTM Hydrometers
ASTM E1000 – 98(2009) : Standard Guide for Radioscopy
ASTM E1001 – 11 : Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
ASTM E1002 – 11 : Standard Practice for Leaks Using Ultrasonics
ASTM E1003 – 13 : Standard Practice for Hydrostatic Leak Testing
ASTM E1004 – 09 : Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
ASTM E1005 – 10 : Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM E1006 – 13 : Standard Practice for Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments
ASTM E1007 – 13b : Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
ASTM E1008 – 03(2009) : Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
ASTM E1009 – 95(2006) : Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
ASTM E1010 – 09 : Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
ASTM E1012 – 12e1 : Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E1014 – 12 : Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
ASTM E1016 – 07(2012)e1 : Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers
ASTM E1018 – 09(2013) : Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E706 (IIB)
ASTM E1019 – 11 : Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
ASTM E102 / E102M – 93(2009) : Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM E1020 – 13e1 : Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation
ASTM E1021 – 12 : Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
ASTM E1022 – 94(2013) : Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks
ASTM E1023 – 84(2007) : Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses
ASTM E1025 – 11 : Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
ASTM E1026 – 13 : Standard Practice for Using the Fricke Dosimetry System
ASTM E103 – 12 : Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E1030 – 05(2011) : Standard Test Method for Radiographic Examination of Metallic Castings
ASTM E1032 – 12 : Standard Test Method for Radiographic Examination of Weldments
ASTM E1033 – 13 : Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature
ASTM E1034 – 95(2013) : Standard Specification for Nuclear Facility Transient Worker Records
ASTM E1035 – 13 : Standard Practice for Determining Neutron Exposures for Nuclear Reactor Vessel Support Structures
ASTM E1036 – 12 : Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM E1037 – 84(2009) : Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM E1038 – 10 : Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
ASTM E104 – 02(2012) : Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
ASTM E1040 – 10 : Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
ASTM E1042 – 02(2014) : Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
ASTM E1043 – 00(2010) : Standard Specification for Pipets, Milk and Cream Examination
ASTM E1044 – 96(2011) : Standard Specification for Glass Serological Pipets (General Purpose and Kahn)
ASTM E1045 – 00(2010) : Standard Specification for Pipet, Sahli Hemoglobin
ASTM E1046 – 85(2010) : Standard Specification for Glass Westergren Tube, Disposable
ASTM E1047 – 85(2010) : Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable
ASTM E1048 – 88(2010) : Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants
ASTM E1049 – 85(2011)e1 : Standard Practices for Cycle Counting in Fatigue Analysis
ASTM E105 – 10 : Standard Practice for Probability Sampling Of Materials
ASTM E1050 – 12 : Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System
ASTM E1052 – 11 : Standard Test Method to Assess the Activity of Microbicides against Viruses in Suspension
ASTM E1053 – 11 : Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces
ASTM E1054 – 08(2013) : Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents
ASTM E1056 – 13 : Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings
ASTM E1057 – 06(2010) : Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
ASTM E1061 – 01(2007) : Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E1064 – 12 : Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E1065 / E1065M – 14 : Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
ASTM E1066 / E1066M – 12 : Standard Practice for Ammonia Colorimetric LeakTesting
ASTM E1067 / E1067M – 11 : Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
ASTM E1068 – 85(2009) : Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
ASTM E1069 – 85(2009) : Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress
ASTM E1070 – 11 : Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
ASTM E1074 – 09 : Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
ASTM E1077 – 14 : Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM E1078 – 09 : Standard Guide for Specimen Preparation and Mounting in Surface Analysis
ASTM E1079 – 10 : Standard Practice for Calibration of Transmission Densitometers
ASTM E108 – 11 : Standard Test Methods for Fire Tests of Roof Coverings
ASTM E1082 – 90(2012) : Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1083 – 00(2011) : Standard Test Method for Sensory Evaluation of Red Pepper Heat
ASTM E1084 – 86(2009) : Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
ASTM E1085 – 09 : Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry
ASTM E1086 – 14 : Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E1090 – 08 : Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins
ASTM E1091 – 13 : Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
ASTM E1092 – 91(2010) : Standard Specification for Glass Micro Folin Pipet, Disposable
ASTM E1093 – 91(2012) : Standard Specification for Glass Prothrombin Pipet, Disposable
ASTM E1094 – 04(2009) : Standard Specification for Pharmaceutical Glass Graduates
ASTM E1095 – 99(2010) : Standard Specification for Common Laboratory Glass Funnels
ASTM E1096 – 86(2011) : Standard Specification for Laboratory Glass Separatory Funnels
ASTM E1097 – 12 : Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
ASTM E11 – 13 : Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM E110 – 10 : Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM E1102 – 91(2009) : Standard Terminology Relating to Agricultural Chemical Application
ASTM E1104 – 98(2009) : Standard Specification for Clinical Thermometer Probe Covers and Sheaths
ASTM E1105 – 00(2008) : Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
ASTM E1106 – 12 : Standard Test Method for Primary Calibration of Acoustic Emission Sensors
ASTM E1107 – 10 : Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
ASTM E1108 – 86(2009) : Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
ASTM E1109 – 86(2009) : Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E111 – 04(2010) : Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM E1110 – 06(2011) : Standard Classification for Determination of Articulation Class
ASTM E1111 – 07 : Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
ASTM E1112 – 00(2011) : Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
ASTM E1114 – 09e1 : Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
ASTM E1115 – 11 : Standard Test Method for Evaluation of Surgical Hand Scrub Formulations
ASTM E1116 – 98(2008) : Standard Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates
ASTM E1118 / E1118M – 11 : Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM E1119 – 09 : Standard Specification for Industrial Grade Ethylene Glycol
ASTM E112 – 13 : Standard Test Methods for Determining Average Grain Size
ASTM E1120 – 08 : Standard Specification for Liquid Chlorine
ASTM E1121 – 12 : Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
ASTM E1123 – 86(2009) : Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
ASTM E1124 – 10 : Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM E1125 – 10 : Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM E1127 – 08 : Standard Guide for Depth Profiling in Auger Electron Spectroscopy
ASTM E1129 / E1129M – 08e1 : Standard Specification for Thermocouple Connectors
ASTM E1130 – 08 : Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
ASTM E1131 – 08(2014) : Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1132 – 13e1 : Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
ASTM E1133 – 86(2010) : Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E1135 – 12 : Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM E1136 – 10 : Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM E1137 / E1137M – 08 : Standard Specification for Industrial Platinum Resistance Thermometers
ASTM E1139 / E1139M – 12 : Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
ASTM E114 – 10 : Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
ASTM E1140 – 95(2010)e1 : Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
ASTM E1142 – 14a : Standard Terminology Relating to Thermophysical Properties
ASTM E1143 – 05(2010) : Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
ASTM E1146 – 08 : Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
ASTM E1151 – 93(2011) : Standard Practice for Ion Chromatography Terms and Relationships
ASTM E1153 – 14 : Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces
ASTM E1154 – 89(2008) : Standard Specification for Piston or Plunger Operated Volumetric Apparatus
ASTM E1155 – 96(2008) : Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
ASTM E1155M – 96(2008) : Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]
ASTM E1157 – 87(2011) : Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
ASTM E1158 – 14 : Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material
ASTM E1159 – 98(2009) : Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
ASTM E1160 – 13 : Standard Guide for On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems
ASTM E1161 – 09 : Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
ASTM E1162 – 11 : Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
ASTM E1163 – 10 : Standard Test Method for Estimating Acute Oral Toxicity in Rats
ASTM E1164 – 12 : Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E1165 – 12 : Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E1166 – 00(2009) : Standard Guide for Network Level Pavement Management
ASTM E1167 – 87(2008) : Standard Guide for Radiation Protection Program for Decommissioning Operations
ASTM E1168 – 95(2013) : Standard Guide for Radiological Protection Training for Nuclear Facility Workers
ASTM E1169 – 14 : Standard Practice for Conducting Ruggedness Tests
ASTM E1170 – 97(2012) : Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
ASTM E1171 – 09 : Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM E1172 – 87(2011) : Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer
ASTM E1173 – 01(2009) : Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations
ASTM E1174 – 13 : Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations
ASTM E1175 – 87(2009) : Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
ASTM E1177 – 09(2014) : Standard Specification for Engine Coolant Grade Glycol
ASTM E1178 – 08 : Standard Test Methods for Analysis of Acrylonitrile
ASTM E1179 – 13 : Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
ASTM E1180 – 08 : Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
ASTM E1181 – 02(2008) : Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1184 – 10 : Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry
ASTM E1185 – 12 : Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
ASTM E1186 – 03(2009) : Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
ASTM E1188 – 11 : Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
ASTM E1189 – 00(2010) : Standard Specification for Micro-Burets (Koch Style)
ASTM E119 – 12a : Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM E1190 – 11 : Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
ASTM E1191 – 03a(2008) : Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
ASTM E1192 – 97(2008) : Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians
ASTM E1193 – 97(2012) : Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
ASTM E1197 – 12 : Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
ASTM E1198 – 87(2012) : Standard Practice for Sampling Zooplankton with Pumps
ASTM E1199 – 87(2012) : Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
ASTM E1200 – 87(2012) : Standard Practice for Preserving Zooplankton Samples
ASTM E1201 – 87(2012) : Standard Practice for Sampling Zooplankton with Conical Tow Nets
ASTM E1207 – 14 : Standard Guide for Sensory Evaluation of Axillary Deodorancy
ASTM E1208 – 10 : Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
ASTM E1209 – 10 : Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
ASTM E1210 – 10 : Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
ASTM E1211 / E1211M – 12 : Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
ASTM E1212 – 12 : Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
ASTM E1213 – 97(2009) : Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
ASTM E1214 – 11 : Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE)
ASTM E1215 – 93(2012) : Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1216 – 11 : Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E1217 – 11 : Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1218 – 04(2012) : Standard Guide for Conducting Static Toxicity Tests with Microalgae
ASTM E1219 – 10 : Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
ASTM E122 – 09e1 : Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM E1220 – 10 : Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
ASTM E1221 – 12a : Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E1222 – 90(2009) : Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
ASTM E1225 – 13 : Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM E1226 – 12a : Standard Test Method for Explosibility of Dust Clouds
ASTM E1228 – 09 : Standard Test Method for Assay of Peroxy Esters-Catalyzed Iodometric Procedure
ASTM E1229 – 08 : Standard Specification for Calcium Hypochlorite
ASTM E123 – 02(2012) : Standard Specification for Apparatus for Determination of Water by Distillation
ASTM E1231 – 10 : Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
ASTM E1232 – 07(2013) : Standard Test Method for Temperature Limit of Flammability of Chemicals
ASTM E1233 / E1233M – 14 : Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
ASTM E1234 – 12 : Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM E1235 – 12 : Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E1237 – 93(2009) : Standard Guide for Installing Bonded Resistance Strain Gages
ASTM E1239 – 04(2010) : Standard Practice for Description of Reservation/Registration-Admission, Discharge, Transfer (R-ADT) Systems for Electronic Health Record (EHR) Systems
ASTM E124 – 94(2010) : Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis
ASTM E1241 – 05(2013) : Standard Guide for Conducting Early Life-Stage Toxicity Tests with Fishes
ASTM E1242 – 97(2008) : Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis
ASTM E1245 – 03(2008) : Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E1247 – 12 : Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
ASTM E1248 – 90(2009) : Standard Practice for Shredder Explosion Protection
ASTM E1249 – 10 : Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources
ASTM E125 – 63(2013) : Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
ASTM E1250 – 10 : Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
ASTM E1251 – 11 : Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
ASTM E1252 – 98(2013)e1 : Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1253 – 13 : Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
ASTM E1254 – 13 : Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films
ASTM E1255 – 09 : Standard Practice for Radioscopy
ASTM E1256 – 11a : Standard Test Methods for Radiation Thermometers (Single Waveband Type)
ASTM E1257 – 93(2008) : Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E1258 – 88(2012) : Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM E1259 – 10 : Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
ASTM E126 – 13a : Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E1260 – 03(2009) : Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
ASTM E1262 – 88(2013) : Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay
ASTM E1263 – 97(2008) : Standard Guide for Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes
ASTM E1264 – 08e1 : Standard Classification for Acoustical Ceiling Products
ASTM E1265 – 04(2013) : Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
ASTM E1266 – 12 : Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM E1268 – 01(2007) : Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
ASTM E1269 – 11 : Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E127 – 10 : Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
ASTM E1270 – 88(2008) : Standard Test Method for Equal Arm Balances
ASTM E1272 – 02(2012) : Standard Specification for Laboratory Glass Graduated Cylinders
ASTM E1273 – 88(2013) : Standard Specification for Color Coding of Reusable Laboratory Pipets
ASTM E1274 – 03(2012) : Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM E1277 – 08 : Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM E128 – 99(2011) : Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM E1280 – 97(2008) : Standard Guide for Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity
ASTM E1281 – 10 : Standard Guide for Nuclear Facility Decommissioning Plans
ASTM E1282 – 11 : Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
ASTM E1285 – 06 : Standard Guide for Identification of Bacteriophage Lambda (?) or Its DNA
ASTM E1286 – 00(2006) : Standard Guide for Identification of Herpes Simplex Virus or Its DNA
ASTM E1289 – 08 : Standard Specification for Reference Specimen for Sound Transmission Loss
ASTM E1292 – 94(2011) : Standard Specification for Gravity Convection and Forced Ventilation Incubators
ASTM E1293 – 02(2012) : Standard Specification for Glass Measuring Pipets
ASTM E1295 – 01(2013) : Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia
ASTM E1297 – 08(2013) : Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
ASTM E1298 – 06 : Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products
ASTM E1299 – 96(2010) : Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E1300 – 12ae1 : Standard Practice for Determining Load Resistance of Glass in Buildings
ASTM E1302 – 13 : Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
ASTM E1303 – 95(2010) – Practice for Refractive Index Detectors Used in Liquid Chromatography
ASTM E1304 – 97(2008)e1 : Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E1306 – 11 : Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM E1307 – 10 : Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
ASTM E1309 – 00(2011) : Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
ASTM E131 – 10 : Standard Terminology Relating to Molecular Spectroscopy
ASTM E1311 – 89(2010) : Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
ASTM E1312 – 09(2013)e1 : Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
ASTM E1316 – 14 : Standard Terminology for Nondestructive Examinations
ASTM E1317 – 12 : Standard Test Method for Flammability of Marine Surface Finishes
ASTM E1318 – 09 : Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
ASTM E1319 – 98(2009) : Standard Guide for High-Temperature Static Strain Measurement
ASTM E132 – 04(2010) : Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM E1320 – 10 : Standard Reference Radiographs for Titanium Castings
ASTM E1321 – 13 : Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E1323 – 09 : Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E1324 – 11 : Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
ASTM E1325 – 02(2008) : Standard Terminology Relating to Design of Experiments
ASTM E1326 – 13 : Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
ASTM E1327 – 07(2012)e1 : Standard Test Method for Evaluation of Antimicrobial Handwash Formulations by Utilizing Fingernail Regions
ASTM E1329 – 10 : Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
ASTM E133 – 92(2010) : Standard Specification for Distillation Equipment
ASTM E1331 – 09 : Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1332 – 10a : Standard Classification for Rating Outdoor-Indoor Sound Attenuation
ASTM E1333 – 10 : Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
ASTM E1335 – 08 : Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
ASTM E1336 – 11 : Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry
ASTM E1337 – 90(2012) : Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E1338 – 09 – Guide for Identification of Metals and Alloys in Computerized Material Property Databases
ASTM E1340 – 05(2010) : Standard Guide for Rapid Prototyping of Information Systems
ASTM E1341 – 06(2011)e1 : Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry
ASTM E1345 – 98(2008)e1 : Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E1346 – 90(2010) : Standard Practice for Bulk Sampling, Handling, and Preparing Edible Vegetable Oils for Sensory Evaluation
ASTM E1347 – 06(2011) : Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1348 – 11 : Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1349 – 06(2013) : Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM E135 – 13a : Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E1350 – 13 : Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service
ASTM E1351 – 01(2012) : Standard Practice for Production and Evaluation of Field Metallographic Replicas
ASTM E1352 – 08a : Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
ASTM E1353 – 08ae1 : Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
ASTM E1354 – 14 : Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1355 – 12 : Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
ASTM E1356 – 08(2014) : Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E1358 – 97(2013) : Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
ASTM E1359 – 12 : Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
ASTM E136 – 12 : Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
ASTM E1360 – 05(2010) : Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
ASTM E1361 – 02(2007) : Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1362 – 10 : Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ASTM E1363 – 13 : Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1364 – 95(2012) : Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM E1366 – 11 : Standard Practice for Standardized Aquatic Microcosms: Fresh Water
ASTM E1367 – 03(2008) : Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM E1368 – 14 : Standard Practice for Visual Inspection of Asbestos Abatement Projects
ASTM E1369 – 11 : Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E1370 – 14 : Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
ASTM E1374 – 06(2011) : Standard Guide for Open Office Acoustics and Applicable ASTM Standards
ASTM E1377 – 99(2010) : Standard Specification for Laboratory Glass Kjeldahl Flasks
ASTM E1378 – 99(2010) : Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks
ASTM E1379 – 90(2010) : Standard Specification for Laboratory Glass Dewar Flask
ASTM E1380 – 90(2010) : Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets
ASTM E1382 – 97(2010) : Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM E1384 – 07(2013) : Standard Practice for Content and Structure of the Electronic Health Record (EHR)
ASTM E1386 – 10 : Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
ASTM E1388 – 12 : Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
ASTM E139 – 11 : Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM E1390 – 12 : Standard Specification for Illuminators Used for Viewing Industrial Radiographs
ASTM E1391 – 03(2008) : Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates
ASTM E1395 – 90(2011) : Standard Test Method for Sensory Evaluation of Low Heat Chilies
ASTM E1396 – 90(2011) : Standard Test Method for Sensory Evaluation of Oleoresin Capsicum
ASTM E1399 / E1399M – 97(2013)e1 : Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
ASTM E140 – 12be1 : Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E1402 – 13 : Standard Guide for Sampling Design
ASTM E1403 – 97(2013) : Standard Specification for Laboratory Glass Boiling Flasks
ASTM E1404 – 94(2013) : Standard Specification for Laboratory Glass Conical Flasks
ASTM E1405 – 98(2010) : Standard Specification for Laboratory Glass Distillation Flasks
ASTM E1406 – 95(2010) : Standard Specification for Laboratory Glass Filter Flasks
ASTM E1409 – 13 : Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM E141 – 10 : Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM E1411 – 09 : Standard Practice for Qualification of Radioscopic Systems
ASTM E1412 – 12 : Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM E1413 – 13 : Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E1414 / E1414M – 11a : Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM E1415 – 91(2012) : Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3
ASTM E1416 – 09 : Standard Test Method for Radioscopic Examination of Weldments
ASTM E1417 / E1417M – 13 : Standard Practice for Liquid Penetrant Testing
ASTM E1418 – 10 : Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
ASTM E1419 – 09 : Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
ASTM E1421 – 99(2009) : Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM E1423 – 14 : Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
ASTM E1424 – 91(2008) : Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
ASTM E1425 – 07 : Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
ASTM E1426 – 98(2009)e1 : Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
ASTM E1428 – 99(2009) : Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)
ASTM E143 – 13 : Standard Test Method for Shear Modulus at Room Temperature
ASTM E1432 – 04(2011) : Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size
ASTM E1434 – 00(2013) : Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
ASTM E1438 – 11 : Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
ASTM E1439 – 12 : Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX)
ASTM E144 – 94(2011) : Standard Practice for Safe Use of Oxygen Combustion Bombs
ASTM E1440 – 91(2012) : Standard Guide for Acute Toxicity Test with the Rotifer Brachionus
ASTM E1441 – 11 : Standard Guide for Computed Tomography (CT) Imaging
ASTM E1444 / E1444M – 12 : Standard Practice for Magnetic Particle Testing
ASTM E1445 – 08 : Standard Terminology Relating to Hazard Potential of Chemicals
ASTM E1446 – 13 : Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry
ASTM E1447 – 09 : Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E1448 / E1448M – 09 : Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1449 – 92(2011) : Standard Guide for Supercritical Fluid Chromatography Terms and Relationships
ASTM E145 – 94(2011) : Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
ASTM E1450 – 09 : Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E1453 – 09 : Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
ASTM E1455 – 03(2010) : Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
ASTM E1456 – 08 : Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)
ASTM E1457 – 13 : Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals
ASTM E1458 – 12 : Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM E1459 – 13 : Standard Guide for Physical Evidence Labeling and Related Documentation
ASTM E1461 – 13 : Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM E1462 – 12 : Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
ASTM E1463 – 92(2012) : Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast of the United States
ASTM E1465 – 08a : Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
ASTM E147 – 61(2011) : Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
ASTM E1470 – 92(2006) : Standard Test Method for Characterization of Proteins by Electrophoretic Mobility
ASTM E1471 – 92(2014) : Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
ASTM E1473 – 09 : Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
ASTM E1474 – 14 : Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E1475 – 13 : Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
ASTM E1476 – 04(2010) : Standard Guide for Metals Identification, Grade Verification, and Sorting
ASTM E1477 – 98a(2013) : Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
ASTM E1478 – 97(2009) : Standard Practice for Visual Color Evaluation of Transparent Sheet Materials
ASTM E1479 – 99(2011) : Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
ASTM E1480 – 92(2013) : Standard Terminology of Facility Management (Building-Related)
ASTM E1481 – 00A(2014)e1 : Standard Terminology of Railing Systems and Rails for Buildings
ASTM E1482 – 12 : Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization
ASTM E1486 – 14 : Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486M – 14 : Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
ASTM E1488 – 12e1 : Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
ASTM E1489 – 08(2013) : Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
ASTM E1490 – 11 : Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions
ASTM E1491 – 06(2012) : Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
ASTM E1492 – 11 : Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
ASTM E1493 – 06 : Standard Guide for Identification of Bacteriophage M13 or Its DNA
ASTM E1494 – 12 : Standard Practice for Encapsulation Testing of Friable Asbestos-Containing Surfacing Materials
ASTM E1495 / E1495M – 12 : Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
ASTM E1497 – 05(2011) : Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids
ASTM E1498 – 92(2012) : Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds
ASTM E1499 – 97(2009) : Standard Guide for Selection, Evaluation, and Training of Observers
ASTM E1502 – 10 : Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
ASTM E1503 – 14 : Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM E1504 – 11 : Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
ASTM E1506 – 08 : Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)
ASTM E1508 – 12a : Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1509 – 12 : Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E1510 – 95(2013)e1 : Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM E1511 – 93(2010) : Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
ASTM E1512 – 01(2007) : Standard Test Methods for Testing Bond Performance of Bonded Anchors
ASTM E1513 – 93(2011) : Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
ASTM E1514 – 98(2011) : Standard Specification for Structural Standing Seam Steel Roof Panel Systems
ASTM E1515 – 07 : Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E1517 – 13 : Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova
ASTM E1518 – 05(2012) : Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method
ASTM E1519 – 13 : Standard Terminology Relating to Agricultural Tank Mix Adjuvants
ASTM E1520 – 99(2009) : Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM E1521 – 01(2006) : Standard Test Method for Liquid Holding Capacity of Granular Carriers
ASTM E1522 – 93(2013) : Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM E1523 – 09 : Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
ASTM E1525 – 02(2008) : Standard Guide for Designing Biological Tests with Sediments
ASTM E1527 – 13 : Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
ASTM E1528 – 14 : Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process
ASTM E1529 – 13 : Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E1530 – 11 : Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
ASTM E1531 – 00(2006) : Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium
ASTM E1532 – 00(2006) : Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Use of Bisbenzamide DNA-Binding Fluorochrome
ASTM E1533 – 00(2006) : Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI) Staining
ASTM E1534 – 93(2013) : Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1536 – 00(2006) : Standard Practice for Detection of Mycoplasma Contamination of Bovine Serum by Large Volume Method
ASTM E1537 – 13 : Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E154 / E154M – 08a(2013)e1 : Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
ASTM E1542 – 10 : Standard Terminology Relating to Occupational Health and Safety
ASTM E1543 – 00(2011) : Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM E1545 – 11 : Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E1546 – 09a : Standard Guide for Development of Fire-Hazard-Assessment Standards
ASTM E1547 – 09 : Standard Terminology Relating to Industrial and Specialty Chemicals
ASTM E1548 – 09 : Standard Practice for Preparation of Aerospace Contamination Control Plans
ASTM E1549 / E1549M – 13 : Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
ASTM E155 – 10 : Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E1551 – 08 : Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
ASTM E1552 – 08 : Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry
ASTM E1554 / E1554M – 13 : Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM E1555 – 12 : Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
ASTM E1556 – 12 : Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
ASTM E1557 – 09 : Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
ASTM E1558 – 09 : Standard Guide for Electrolytic Polishing of Metallographic Specimens
ASTM E1559 – 09 : Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
ASTM E1560 – 11e1 : Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM E1561 – 93(2009) : Standard Practice for Analysis of Strain Gage Rosette Data
ASTM E1562 – 00(2013) : Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids
ASTM E1563 – 98(2012) : Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos
ASTM E1564 – 00(2006) : Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials
ASTM E1565 – 00(2006) : Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures
ASTM E1566 – 00(2006) : Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen
ASTM E1568 – 13 : Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E1569 – 09 : Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique
ASTM E1570 – 11 : Standard Practice for Computed Tomographic (CT) Examination
ASTM E1571 – 11 : Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
ASTM E1573 – 09 : Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
ASTM E1574 – 98(2014) : Standard Test Method for Measurement of Sound in Residential Spaces
ASTM E1575 – 12 : Standard Practice for Pressure Water Cleaning and Cutting
ASTM E1577 – 11 : Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
ASTM E1578 – 13 : Standard Guide for Laboratory Informatics
ASTM E1582 – 10 : Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1584 – 11 : Standard Test Method for Assay of Nitric Acid
ASTM E1587 – 10 : Standard Test Methods for Chemical Analysis of Refined Nickel
ASTM E1588 – 10e1 : Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1589 – 05(2010) : Standard Test Method for Evaluation of First Aid Antiseptic Drug Products
ASTM E159 – 10 : Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
ASTM E1590 – 13 : Standard Test Method for Fire Testing of Mattresses
ASTM E1591 – 13 : Standard Guide for Obtaining Data for Fire Growth Models
ASTM E1592 – 05(2012) : Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
ASTM E1593 – 13 : Standard Guide for Assessing the Efficacy of Air Care Products in Reducing the Perception of Indoor Malodor
ASTM E1594 – 11 : Standard Guide for Expression of Temperature
ASTM E1597 – 10 : Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
ASTM E1600 – 13 : Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry
ASTM E1601 – 12 : Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E1602 – 03(2010)e1 : Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM E1603 / E1603M – 11 : Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E1604 – 12 : Standard Guide for Behavioral Testing in Aquatic Toxicology
ASTM E1605 – 04(2012) : Standard Terminology Relating to Lead in Buildings
ASTM E1606 – 09 : Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes
ASTM E161 – 12 : Standard Specification for Precision Electroformed Sieves
ASTM E1610 – 14 : Standard Guide for Forensic Paint Analysis and Comparison
ASTM E1611 – 00(2013) : Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids
ASTM E1612 / E1612M – 94(2013)e1 : Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM E1613 – 12 : Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E1614 – 94(2013) : Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in?Remote?Fiber-Optic Spectroscopy?and Broadband?Systems
ASTM E1615 – 08 : Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1616 – 08 : Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
ASTM E1617 – 09(2014)e1 : Standard Practice for Reporting Particle Size Characterization Data
ASTM E1618 – 11 : Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E1619 – 11 : Standard Test Method for Chronic Oral Toxicity Study in Rats
ASTM E162 – 13 : Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1620 – 97(2012) : Standard Terminology Relating to Liquid Particles and Atomization
ASTM E1621 – 13 : Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E1623 – 11 : Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E1627 – 11 : Standard Practice for Sensory Evaluation of Edible Oils and Fats
ASTM E1628 – 94(2008) : Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration
ASTM E1629 – 12 : Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM E1633 – 08a(2013) : Standard Specification for Coded Values Used in the Electronic Health Record
ASTM E1634 – 11 : Standard Guide for Performing Sputter Crater Depth Measurements
ASTM E1635 – 06(2011) : Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
ASTM E1636 – 10 : Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function
ASTM E1637 – 98(2011) : Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
ASTM E1638 – 13 : Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ASTM E164 – 13 : Standard Practice for Contact Ultrasonic Testing of Weldments
ASTM E1640 – 13 : Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1641 – 13 : Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1642 – 00(2010) : Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
ASTM E1643 – 11 : Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
ASTM E1644 – 04(2012)e1 : Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E1645 – 01(2007) : Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1646 – 95(2011) : Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
ASTM E1647 – 09 : Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM E1648 – 95(2011) : Standard Reference Radiographs for Examination of Aluminum Fusion Welds
ASTM E165 / E165M – 12 : Standard Practice for Liquid Penetrant Examination for General Industry
ASTM E1652 – 14a : Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples
ASTM E1653 – 94(2013) : Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
ASTM E1654 – 94(2013) : Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
ASTM E1655 – 05(2012) : Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E1656 / E1656M – 11 : Standard Guide for Classification of Automated Pavement Condition Survey Equipment
ASTM E1657 – 98(2011) : Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
ASTM E1658 – 08 : Standard Terminology for Expressing Conclusions of Forensic Document Examiners
ASTM E1659 – 12 : Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM E1660 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Support for Office Work
ASTM E1661 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
ASTM E1662 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
ASTM E1663 – 03(2010) : Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
ASTM E1664 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
ASTM E1665 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Facility Protection
ASTM E1666 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
ASTM E1667 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
ASTM E1668 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
ASTM E1669 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
ASTM E1670 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
ASTM E1671 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Cleanliness
ASTM E1672 – 12 : Standard Guide for Computed Tomography (CT) System Selection
ASTM E1673 – 96(2012) : Standard Test Method for Percent Suspensibility
ASTM E1675 – 04(2012) : Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM E1676 – 12 : Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Enchytraeus albidus
ASTM E1677 – 11 : Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
ASTM E1678 – 10 : Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM E1679 – 13 : Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
ASTM E168 – 06 : Standard Practices for General Techniques of Infrared Quantitative Analysis
ASTM E1680 – 11 : Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
ASTM E1681 – 03(2013) : Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E1682 – 08(2013) : Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit
ASTM E1683 – 02(2014)e1 : Standard Practice for Testing the Performance of Scanning Raman Spectrometers
ASTM E1684 – 10 : Standard Specification for Miniature Thermocouple Connectors
ASTM E1685 – 13 : Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
ASTM E1686 – 10 : Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
ASTM E1687 – 10 : Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
ASTM E1688 – 10 : Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates
ASTM E1689 – 95(2014) : Standard Guide for Developing Conceptual Site Models for Contaminated Sites
ASTM E169 – 04(2009) : Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E1690 – 08 : Standard Test Method for Determination of Ethanol Extractives in Biomass
ASTM E1692 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
ASTM E1693 – 95(2012) : Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
ASTM E1694 – 95a(2012) : Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
ASTM E1695 – 95(2013) : Standard Test Method for Measurement of Computed Tomography (CT) System Performance
ASTM E1697 – 05(2012)e1 : Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
ASTM E1698 – 95(2010) : Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
ASTM E1699 – 14 : Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
ASTM E170 – 10 : Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E1700 – 13 : Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
ASTM E1701 – 95(2012) : Standard Classification for Serviceability of an Office Facility for Manageability
ASTM E1703 / E1703M – 10 : Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM E1704 – 95(2010) : Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
ASTM E1705 – 13 : Standard Terminology Relating to Biotechnology
ASTM E1706 – 05(2010) : Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
ASTM E1708 – 14 : Standard Practice for Electronic Interchange of Color and Appearance Data
ASTM E1709 – 09 : Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM E171 / E171M – 11 : Standard Practice for Conditioning and Testing Flexible Barrier Packaging
ASTM E1710 – 11 : Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E1711 – 12 : Standard Guide for Measurement of Behavior During Fish Toxicity Tests
ASTM E1714 – 07(2013) : Standard Guide for Properties of a Universal Healthcare Identifier (UHID)
ASTM E1715 – 01(2013) : Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems
ASTM E1719 – 12 : Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM E1721 – 01(2009) : Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E1725 – 08 : Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E1726 – 01(2009) : Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1728 – 10 : Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1730 – 09 : Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
ASTM E1731 – 11 : Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E1732 – 12 : Standard Terminology Relating to Forensic Science
ASTM E1733 – 95(2008) : Standard Guide for Use of Lighting in Laboratory Testing
ASTM E1734 – 09 : Standard Practice for Radioscopic Examination of Castings
ASTM E1735 – 07 : Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV
ASTM E1736 – 10 : Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
ASTM E1739 – 95(2010)e1 : Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites
ASTM E1740 – 10 : Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E1742 / E1742M – 12 : Standard Practice for Radiographic Examination
ASTM E1744 – 04(2010) : Standard Practice for View of Emergency Medical Care in the Electronic Health Record
ASTM E1745 – 11 : Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
ASTM E1746 – 08 : Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM E1747 – 95(2011) : Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications
ASTM E1748 – 95(2009) : Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
ASTM E1749 – 10 : Standard Terminology Relating to Rigid Wall Relocatable Shelters
ASTM E175 – 82(2010) : Standard Terminology of Microscopy
ASTM E1750 – 10 : Standard Guide for Use of Water Triple Point Cells
ASTM E1751 / E1751M – 09e1 : Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
ASTM E1753 – 13 : Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
ASTM E1754 – 08 : Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM E1755 – 01(2007) : Standard Test Method for Ash in Biomass
ASTM E1756 – 08 : Standard Test Method for Determination of Total Solids in Biomass
ASTM E1757 – 01(2007) : Standard Practice for Preparation of Biomass for Compositional Analysis
ASTM E1758 – 01(2007) : Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM E176 – 13 : Standard Terminology of Fire Standards
ASTM E1760 – 09 : Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
ASTM E1762 – 95(2013) : Standard Guide for Electronic Authentication of Health Care Information
ASTM E1763 – 06 : Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM E1765 – 11 : Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
ASTM E1766 – 95(2007) : Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices
ASTM E1767 – 11 : Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
ASTM E1768 – 95(2013) : Standard Guide for Ventilatory Behavioral Toxicology Testing of Freshwater Fish
ASTM E177 – 14 : Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E1770 – 95(2006) : Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
ASTM E1771 – 07 : Standard Test Method for Determination of Copper in Anode and Blister Copper
ASTM E1773 – 10 : Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
ASTM E1774 – 12 : Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
ASTM E1775 – 07 : Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E1776 – 13 : Standard Guide for Development of Fire-Risk-Assessment Standards
ASTM E1777 – 09 : Standard Guide for Prioritization of Data Needs for Pavement Management
ASTM E1778 – 98a(2008) : Standard Terminology Relating to Pavement Distress
ASTM E178 – 08 : Standard Practice for Dealing With Outlying Observations
ASTM E1780 – 12 : Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
ASTM E1781 / E1781M – 13 : Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM E1782 – 14 : Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1783 / E1783M – 96(2013)e1 : Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM E1784 – 08 : Standard Test Method for Total Peroxides in Acrylonitrile
ASTM E1786 – 08 : Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1787 – 08 : Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
ASTM E1788 – 08 : Standard Test Method for Acidity in Acrylonitrile
ASTM E179 – 12 : Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM E1790 – 04(2010) : Standard Practice for Near Infrared Qualitative Analysis
ASTM E1791 – 96(2014) : Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
ASTM E1792 – 03(2011) : Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E1793 – 11 : Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
ASTM E1794 – 13 : Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
ASTM E1795 – 12 : Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E1796 – 03(2011)e1 : Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E1797 – 12 : Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E1799 – 12 : Standard Practice for Visual Inspections of Photovoltaic Modules
ASTM E18 – 14 : Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E1800 – 13 : Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
ASTM E1801 – 09 : Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
ASTM E1802 – 12 : Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules
ASTM E1803 – 14 : Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels
ASTM E1804 – 12 : Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E1805 – 13 : Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM E1806 – 09 : Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E1808 – 96(2009) : Standard Guide for Designing and Conducting Visual Experiments
ASTM E181 – 10 : Standard Test Methods for Detector Calibration and Analysis of Radionuclides
ASTM E1810 – 12 : Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish
ASTM E1813 – 96(2007) : Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
ASTM E1814 – 14 : Standard Practice for Computed Tomographic (CT) Examination of Castings
ASTM E1815 – 08(2013)e1 : Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1816 – 12 : Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
ASTM E1817 – 08 : Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
ASTM E1819 – 10 : Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
ASTM E1820 – 13 : Standard Test Method for Measurement of Fracture Toughness
ASTM E1821 – 08 : Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E1822 – 13 : Standard Test Method for Fire Testing of Stacked Chairs
ASTM E1823 – 13 : Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E1824 – 13 : Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM E1825 – 06(2012) : Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
ASTM E1826 – 12 : Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
ASTM E1827 – 11 : Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM E1829 – 09 : Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM E1830 – 09 : Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules
ASTM E1832 – 08(2012) : Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
ASTM E1833 – 07a(2013)e1 : Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM E1834 – 11 : Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM E1835 – 09 : Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E1836 / E1836M – 09e1 : Standard Practice for Building Floor Area Measurements for Facility Management
ASTM E1837 – 96(2007) : Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)
ASTM E1838 – 10 : Standard Test Method for Determining the Virus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults
ASTM E1839 – 13 : Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime
ASTM E1840 – 96(2014) : Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM E1841 – 04(2012) : Standard Guide for Conducting Renewal Phytotoxicity Tests With Freshwater Emergent Macrophytes
ASTM E1843 – 96(2010) : Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection
ASTM E1844 – 08 : Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire
ASTM E1845 – 09 : Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
ASTM E1847 – 96(2013) : Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines
ASTM E1848 – 96(2014) : Standard Guide for Selecting and Using Ecological Endpoints for Contaminated Sites
ASTM E1849 – 96(2013) : Standard Guide for Fish and Wildlife Incident Monitoring and Reporting
ASTM E185 – 10 : Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
ASTM E1850 – 04(2012) : Standard Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests
ASTM E1851 – 09 : Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
ASTM E1852 – 13 : Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
ASTM E1854 – 13 : Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts
ASTM E1855 – 10 : Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM E1856 – 13 : Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM E1857 – 97(2013)e1 : Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
ASTM E1858 – 08 : Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E1859 / E1859M – 11e1 : Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
ASTM E186 – 10 : Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings
ASTM E1860 – 13 : Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E1862 – 97(2010) : Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM E1863 – 07 : Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
ASTM E1865 – 97(2013) : Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
ASTM E1866 – 97(2013) : Standard Guide for Establishing Spectrophotometer Performance Tests
ASTM E1867 – 13 : Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1868 – 10 : Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1869 – 04(2014) : Standard Guide for Confidentiality, Privacy, Access, and Data Security Principles for Health Information Including Electronic Health Records
ASTM E1870 – 11 : Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film
ASTM E1871 – 10 : Standard Guide for Serving Protocol for Sensory Evaluation of Foods and Beverages
ASTM E1873 – 06 : Standard Guide for Detection of Nucleic Acid Sequences by the Polymerase Chain Reaction Technique
ASTM E1874 – 14 : Standard Test Method for Recovery of Microorganisms From Skin using the Cup Scrub Technique
ASTM E1875 – 13 : Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Sonic Resonance
ASTM E1876 – 09 : Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impulse Excitation of Vibration
ASTM E1877 – 13 : Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
ASTM E1878 – 97(2013) : Standard Specification for Laboratory Glass Volumetric Flasks, Special Use
ASTM E1879 – 00(2010) : Standard Guide for Sensory Evaluation of Beverages Containing Alcohol
ASTM E1880 – 12 : Standard Practice for Tissue Cryosection Analysis with SIMS
ASTM E1881 – 12 : Standard Guide for Cell Culture Analysis with SIMS
ASTM E1882 – 10 : Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique
ASTM E1883 – 02(2007) : Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique
ASTM E1885 – 04(2011) : Standard Test Method for Sensory Analysis – Triangle Test
ASTM E1886 – 13a : Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
ASTM E1888 / E1888M – 12 : Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
ASTM E1889 – 97(2009) : Standard Guide for Pavement Management Implementation
ASTM E1890 – 11 : Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment
ASTM E1891 – 10a : Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1892 – 09 : Standard Guide for Preparing Characterization Plans for Decommissioning Nuclear Facilities
ASTM E1893 – 08a : Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls
ASTM E1894 – 13a : Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
ASTM E1897 – 97(2010) : Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
ASTM E1898 – 13 : Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM E1899 – 08 : Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide
ASTM E190 – 92(2008) : Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM E1901 – 13 : Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods
ASTM E1903 – 11 : Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process
ASTM E1908 – 10 : Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
ASTM E1909 – 13 : Standard Guide for Time-Intensity Evaluation of Sensory Attributes
ASTM E191 – 64(2011) : Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E1910 / E1910M – 04(2009) – Test Method for Agricultural pH Control Agents
ASTM E1911 – 09ae1 : Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
ASTM E1914 – 07 : Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
ASTM E1915 – 13 : Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
ASTM E1916 – 11 : Standard Guide for Identification of Mixed Lots of Metals
ASTM E1917 – 13 : Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
ASTM E1918 – 06 : Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM E1919 – 09 : Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization
ASTM E192 – 13 : Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications
ASTM E1920 – 03(2008) : Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings
ASTM E1921 – 13a : Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1922 – 04(2010)e1 : Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E1925 – 10 : Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
ASTM E1926 – 08 : Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1927 – 98(2012) : Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
ASTM E1928 – 13 : Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
ASTM E193 – 94(2010) : Standard Specification for Laboratory Glass Micropipets
ASTM E1930 / E1930M – 12 : Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
ASTM E1931 – 09 : Standard Guide for X-Ray Compton Scatter Tomography
ASTM E1932 – 12 : Standard Guide for Acoustic Emission Examination of Small Parts
ASTM E1933 – 99a(2010) : Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
ASTM E1934 – 99a(2010) : Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
ASTM E1935 – 97(2013) : Standard Test Method for Calibrating and Measuring CT Density
ASTM E1936 – 03(2011) : Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
ASTM E1938 – 13 : Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
ASTM E194 – 10 : Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
ASTM E1941 – 10 : Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM E1942 – 98(2010)e1 : Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM E1943 – 98(2010) : Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites
ASTM E1944 – 98(2013) : Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1945 – 02(2008) : Standard Test Method for Percent Dispersibility
ASTM E1946 – 12 : Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
ASTM E1947 – 98(2009) : Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1948 – 98(2009) : Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
ASTM E1949 – 03(2009) : Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM E1950 – 10 : Standard Practice for Reporting Results from Methods of Chemical Analysis
ASTM E1951 – 02(2007) : Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1952 – 11 : Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1953 – 14 : Standard Practice for Description of Thermal Analysis and Rheology Apparatus
ASTM E1954 – 05(2011) : Standard Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
ASTM E1955 – 04(2009) : Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs
ASTM E1957 – 04(2010) : Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
ASTM E1958 – 12 : Standard Guide for Sensory Claim Substantiation
ASTM E1959 – 05(2011) : Standard Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare Institutions
ASTM E196 – 06(2012) : Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
ASTM E1960 – 07(2011) : Standard Practice for Calculating International Friction Index of a Pavement Surface
ASTM E1961 – 11 : Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units
ASTM E1962 – 09 : Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
ASTM E1963 – 09 : Standard Guide for Conducting Terrestrial Plant Toxicity Tests
ASTM E1965 – 98(2009) : Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1966 – 07(2011) : Standard Test Method for Fire-Resistive Joint Systems
ASTM E1967 – 11a : Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM E1968 – 11 : Standard Guide for Microcrystal Testing in the Forensic Analysis of Cocaine
ASTM E1969 – 11 : Standard Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine
ASTM E1970 – 11 : Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1971 – 05(2011) : Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
ASTM E1972 – 04(2011) : Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment
ASTM E1974 – 11 : Standard Specification for Shelter, Electrical Equipment S-250/G
ASTM E1975 – 09 : Standard Specification for Shelter, Electrical, Equipment S-280/G
ASTM E1976 – 11 : Standard Specification for Shelter, Tactical, Nonexpandable
ASTM E1977 – 11 : Standard Specification for Shelter, Tactical, Expandable, One-Side
ASTM E1978 – 11 : Standard Specification for Shelter, Tactical, Expandable, Two-Side
ASTM E1979 – 12 : Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E1980 – 11 : Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
ASTM E1981 – 98(2012)e2 : Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
ASTM E1982 – 98(2013) : Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
ASTM E1985 – 98(2013) : Standard Guide for User Authentication and Authorization
ASTM E1986 – 09(2013) : Standard Guide for Information Access Privileges to Health Information
ASTM E1990 – 14 : Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations
ASTM E1993 / E1993M – 98(2013)e1 : Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
ASTM E1994 – 09(2013) : Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
ASTM E1995 – 12 : Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E1996 – 12a : Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
ASTM E1997 – 12 : Standard Practice for the Selection of Spacecraft Materials
ASTM E1998 – 11 : Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
ASTM E1999 – 11 : Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
ASTM E200 – 08 : Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM E2001 – 13 : Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
ASTM E2002 – 98(2009) : Standard Practice for Determining Total Image Unsharpness in Radiology
ASTM E2003 – 10 : Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
ASTM E2004 – 10 : Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM E2005 – 10 : Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E2006 – 10 : Standard Guide for Benchmark Testing of Light Water Reactor Calculations
ASTM E2007 – 10 : Standard Guide for Computed Radiography
ASTM E2008 – 08(2014)e1 : Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E2009 – 08(2014)e1 : Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2011 – 13 : Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand
ASTM E2012 – 06(2012) : Standard Guide for the Preparation of a Binary Chemical Compatibility Chart
ASTM E2013 – 12 : Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
ASTM E2014 – 11 : Standard Guide on Metallographic Laboratory Safety
ASTM E2015 – 04(2009) : Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM E2016 – 11 : Standard Specification for Industrial Woven Wire Cloth
ASTM E2017 – 99(2010) : Standard Guide for Amendments to Health Information
ASTM E2018 – 08 : Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
ASTM E2019 – 03(2013) : Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
ASTM E202 – 12 : Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
ASTM E2020 – 99a(2010) : Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites
ASTM E2021 – 09(2013) : Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2022 – 11 : Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
ASTM E2023 – 10 : Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
ASTM E2024 / E2024M – 11 : Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
ASTM E2025 – 99(2006) : Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
ASTM E2026 – 07 : Standard Guide for Seismic Risk Assessment of Buildings
ASTM E2027 – 09 : Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials
ASTM E2029 – 11 : Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E203 – 08 : Standard Test Method for Water Using Volumetric Karl Fischer Titration
ASTM E2030 – 09a : Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
ASTM E2031 – 99(2010) : Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E2032 – 09(2013) : Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119
ASTM E2033 – 99(2013) : Standard Practice for Computed Radiology (Photostimulable Luminescence Method)
ASTM E2034 – 99(2012) : Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
ASTM E2035 – 12 : Standard Terminology Relating to Forensic Psychophysiology
ASTM E2036 – 07 : Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
ASTM E2037 – 07 : Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
ASTM E204 – 98(2007) : Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
ASTM E2040 – 08(2014) : Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2041 – 13e1 : Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2042 / E2042M – 09 : Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
ASTM E2043 – 99(2012) : Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2044 – 99(2012) : Standard Test Method for Spreading of Liquid Agricultural Spray Mixtures
ASTM E2045 – 99(2009) : Standard Practice for Detailed Clinical Observations of Test Animals
ASTM E2046 – 14 : Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM E2047 – 10 : Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
ASTM E2048 – 99(2006) : Standard Guide for Detection of Nucleic Acids of the Mycobacterium Tuberculosis Complex and Other Pathogenic Mycobacteria by the Polymerase Chain Reaction Technique
ASTM E2049 – 12 : Standard Guide for Quantitative Attribute Evaluation of Fragrance/Odors for Shampoos and Hair Conditioners by Trained Assessors
ASTM E205 – 96(2010) : Standard Specification for Glass and Oxygen Combustion Flask
ASTM E2050 – 12a : Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
ASTM E2056 – 04(2010) : Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2057 – 10 : Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations
ASTM E2058 – 13a : Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E2059 – 06(2010) : Standard Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry
ASTM E2060 – 06 : Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
ASTM E2061 – 12 : Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E2062 – 11 : Standard Guide for PDD Examination Standards of Practice
ASTM E2063 – 12 : Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E2064 – 00(2014) : Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD)
ASTM E2065 – 11 : Standard Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners
ASTM E2066 – 00(2007) : Standard Guide for Validation of Laboratory Information Management Systems
ASTM E2067 – 12 : Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM E2068 – 00(2008) : Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
ASTM E2069 – 06(2012) : Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E207 – 08 : Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM E2070 – 13 : Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2071 – 00(2010) : Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
ASTM E2072 – 10 : Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
ASTM E2073 – 10 : Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E2075 / E2075M – 10 : Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
ASTM E2076 / E2076M – 10 : Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
ASTM E2077 – 00(2010) : Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
ASTM E2078 – 00(2010) : Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data
ASTM E2079 – 07(2013) : Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
ASTM E208 – 06(2012) : Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E2080 – 06 : Standard Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex Offenders
ASTM E2081 – 00(2010)e1 : Standard Guide for Risk-Based Corrective Action
ASTM E2082 – 12 : Standard Guide for Descriptive Analysis of Shampoo Performance
ASTM E2083 – 05(2010) : Standard Classification for Building Construction Field Requirements, and Office Overhead Profit

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com