Ambient Temperature Mechanical Properties of Precipitation Hardening Stainless Steel Flat Products to BS EN 10088-2
Ambient temperature mechanical properties of precipitation hardening stainless steel flat products to BS EN-10088-2
The BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes.
The current edition was published in October 2014. Mechanical properties are specified include proof strength,
tensile strength and elongation. These are tabulated in this article for the precipitation hardening grades 1.4542 and 1.4568.
LAST UPDATED 25th NOVEMBER 2014.
AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF PRECIPITATION HARDENING STAINLESS STEEL FLAT
PRODUCTS TO BS EN 10088-2
Introduction
BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. This article gives
the 0.2% proof strength, tensile strength and elongation levels, where specified, of the 2 precipitation hardening grades
listed in the standard.
The data given is not intended to replace that shown in individual standards to which reference should always be made.
BS EN 10088-2:2014 Edition
BS EN 10088-2 was originally published in 1995. The second version, BS EN 10088-2:2005, has been superseded by
BS EN 10088-2:2014.
The tables shown here have the 2014 tensile property ranges of the 2 precipitation hardening steels 1.4542 and 1.4568.
The specified properties have not been changed for these grades.
BS EN 10088-2 mechanical properties – precipitation hardening stainless steels
Designation Mechanical properties min unless stated
Steel name Steel number Product Heat treatment condition2) Proof strength Rp0.2 N/mm2 Tensile strength Rm N/mm2 Elongation3),4) %
Form1) Thickness mm max
Precipitation hardening stainless steels in the heat treated condition-special grades (martensitic steel)
X5CrNiCuNb16-4 1.4542 C 8 AT5) – <1275 5
C 8 P13006) 1150 1300 3
C 8 P9006) 700 900 6
P 50 P10707) 1000 1070/1270 10
P 50 P9507) 800 950/1150 12
P 50 P8507) 600 850/1050 14
P 50 SR6308) – <1050 –
X7CrAl17-7 1.4568 C 8 AT5),9) – <1030 19
C 8 P14506) 1310 1450 2
Note
C= Cold rolled strip; H= hot rolled strip; P= hot rolled plate.
AT = solution annealed; P = precipitation hardened; SR= strength relieved.
The values apply for test pieces with a gauge length of 80mm and a width of 20mm. Test pieces with a gauge length of
50mm and a width of 12.5mm can also be used.
The values apply for test pieces with a gauge length of 5.65 So0.5
Delivery condition.
Condition of application; other precipitation hardening temperatures may be agreed.
If ordered in the finally treated condition.
Delivery condition for further processing; final treatment according to table A.3 of BS EN 10088-2.
For spring-hard rolled condition see EN 10151
Related Articles
Chemical composition of stainless steel flat products for general purposes to BS EN 10088-2
Ambient temperature mechanical properties of ferritic stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of martensitic stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of austenitic stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel flat products to BS EN 10088-2
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.