Ambient Temperature Mechanical Properties of Martensitic Stainless Steel Flat Products to BS EN 10088-2
Ambient temperature mechanical properties of martensitic stainless steel flat products to BS EN-10088-2
The BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes.
The current edition was published in October 2014. Mechanical properties are specified, including proof and
tensile strength, elongation, impact strength and hardness. Only tensile and hardness properties are tabulated
in this article for the martensitic grades. LAST UPDATED 25th NOVEMBER 2014.
AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF MARTENSITIC STAINLESS STEEL FLAT PRODUCTS
TO BS EN 10088-2
Introduction
BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes.
This article gives the 0.2% proof strength, tensile strength, elongation and hardness levels, where specified,
of the 14 martensitic grades listed in the standard. The standard also specifies includes impact properties fro some grades.
For reasons of space, these are omitted from the tables shown here.
As an alternative to scanning down the list try the ‘find’ facility on your keyboard, using the ‘Ctrl’ and ‘F’ keys together.
Type in the term you are looking for in the dialog box that then appears.
The data given is not intended to replace that shown in individual standards to which reference should always be made.
BS EN 10088-2:2014 Edition
BS EN 10088-2 was originally published in 1995. The second current version, BS EN 10088-2:2005, has been superseded
by BS EN 10088-2:2014. The tables shown here only have the 2014 tensile and where appropriate, hardness, property ranges
of the martensitic steels. No new grades were added. The properties for 1.4034 were amended.
BS EN 10088-2 mechanical properties – martensitic stainless steels
Designation Mechanical properties min unless stated
Steel name Steel number Product Heat treatment condition2) Proof strength Rp0.2N/mm2 Tensile strength RmN/mm2 Elongation A80mm4) for < 3mm A5) for >3mm Hardness3)
Form1) Thickness mm max. % HRB HB HRC HV
Martensitic stainless steels in the heat treated condition-standard steels
X12Cr13 1.4006 C 8 A – <600 20 90 200 – –
H 13.5 A – <600 20 90 200 – –
P6) 75 QT550 400 550/750 15 – – – –
P6) 75 QT650 450 650/850 12 – – – –
X15Cr13 1.4024 C 8 A – <650 20 90 200 – –
H 13.5 A – <650 20 90 200 – –
P 75 A – – – – – – –
P 75 QT550 400 550/750 15 – – – –
P 75 QT650 450 650/850 12 – – – –
X20Cr13 1.4021 C 3 QT – – – – – 44/50 440/530
C 8 A – <700 15 95 225 – –
H 13.5 A – <700 15 95 225 – –
P6) 75 QT650 450 650/850 12 – – – –
P6) 75 QT750 550 750/950 10 – – – –
X30Cr13 1.4028 C 3 QT – – – – – 45/51 450/550
C 8 A – <740 15 97 235 – –
H 13.5 A – <740 15 97 235 – –
P6) 75 QT800 600 800/1000 10 – – – –
X39Cr13 1.4031 C 3 QT – – – – – 47/53 480/580
C 8 A – <760 12 98 240 – –
H 13.5 A – <760 12 98 240 – –
X46Cr13 1.4034 C 3 QT – <780 49/55 510/610
C 8 A – <780 12 99 245 – –
H 13.5 A – <780 12 99 245
X38CrMo14 1.4419 C 3 QT – – – – – 46/52 450/560
C 4 A – <760 15 97 235 – –
H 6.5 A – <760 15 97 235 – –
X55CrMo14 1.4110 C 8 A – <850 12 100 280 – –
H 13.5 A – <850 12 100 280 – –
P 75 A – – – – – – –
X46CrMoV15 1.4116 C 8 A – <850 12 100 280 – –
H 13.5 A – <850 12 100 280 – –
X39CrMo17-1 1.4122 C 3 QT – – – – – 47/53 480/580
C 8 A – <900 12 100 280 – –
H 13.5 A – <900 12 100 280 – –
X3CrNiMo13-4 1.4313 P 75 QT780 630 780/980 15 – – – –
P 75 QT900 800 900/1100 11 – – – –
X4CrNiMo16-5-1 1.4418 P 75 QT840 660 840/1100 14 – – – –
Martensitic stainless steels in the heat treated condition-special steels
X1CrNiMoCu12-5-2 1.4422 H 13.5 A 550 750/950 15 100 300 – –
P 75 QT650 550 750/950 15 – – – <300
X1CrNiMoCu12-7-3 1.4423 H 13.5 A 550 750/950 15 100 300 – –
P 75 QT650 550 750/950 15 – – – <300
Note
C= Cold rolled strip; H= hot rolled strip; P= hot rolled plate.
A= annealed, QT= quenched and tempered.
The Brinell or Vickers or Rockwell hardness is normally determined for product forms C and H in heat-treatment condition A.
The tensile test shall be carried out in referee testing.
The values apply for test pieces with a gauge length of 80mm and a width of 20mm. Test pieces with a gauge length of 50mm
and a width of 12.5mm can also be used.
The values apply for test pieces with a gauge length of 5.65 So0.5
Plates may also be delivered in the annealed condition; in such cases the mechanical properties are to be agreed at the
time of enquiry and order.
Related Articles
Chemical composition of stainless steel flat products for general purposes to BS EN 10088-2
Ambient temperature mechanical properties of ferritic stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of precipitation hardening stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of austenitic stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel flat products to BS EN 10088-2
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.