Ambient Temperature Mechanical Properties of Martensitic And Precipitation Hardening Stainless Steel Long Products To BS EN 10088-3
Ambient temperature mechanical properties of martensitic and precipitation hardening stainless steel long products to BS EN-10088-3
The BS EN 10088-3 standard gives the mechanical properties for martensitic and precipitation hardening stainless steel semi-finished
products, bars, rods and sections for general purposes. The properties given are proof strength, tensile strength, elongation and hardness.
AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF MARTENSITIC AND PRECIPITATION HARDENING STAINLESS STEEL
LONG PRODUCTS TO BS EN 10088-3
Introduction
BS EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes.
This article covers martensitic and precipitation hardening stainless steels. The properties given are proof strength, tensile strength,
elongation and hardness.
The data given is not intended to replace that shown in individual standards to which reference should always be made.
BS EN 10088-3:20014 Edition
BS EN 10088-3 was originally published in 1995. The second version, BS EN 10088-3:2005, has been superseded by BS EN 10088-3:2014.
The tables shown here only have the 2014 tensile property ranges of the martensitic and precipitation hardening steels. Two new grades
have been added, 1.4150 and 1.4612.
The mechanical properties of the following grades were changed:
1.4313, 1.4028, 1.4122, 1.4057, 1.4606.
This article does not include bright products.
BS EN 10088-3 mechanical properties – martensitic and precipitation hardening stainless steels
Designation Mechanical properties min unless stated
Steel name Steel number Thickness d mm Heat treatment condition1) Proof strength Rp0.2 3) N/mm2 Tensile strength R m 3) N/mm3 Elongation A3) % Max hardness2) HB
Martensitic stainless steels-standard grades
X12Cr13 1.4006 – A – max. 730 – 220
<160 QT650 450 650/850 15 –
X12CrS13 1.4005 – A – max. 730 – 220
<160 QT650 450 650/850 12 –
X15Cr13 1.4024 – A – max. 730 – 220
<160 QT650 450 650/850 15 –
X20Cr13 1.4021 – A – max. 760 – 230
<160 QT700 500 700/850 13 –
<160 QT800 600 800/950 12 –
X30Cr13 1.4028 – A – max. 800 – 245
<160 QT850 650 850/1000 10 –
X39Cr13 1.4031 – A – max. 800 – 245
<160 QT800 650 800/1000 10 –
X46Cr13 1.4034 – A – max. 800 – 245
<160 QT800 650 850/1000 10 –
X38CrMo14 1.4419 – A – max. 760 – 235
X50CrMoV15 1.4116 – A – max. 900 – 280
X55CrMo14 1.4110 <100 A – max. 950 – 280
X14CrMoS17 1.4104 – A – max. 730 – 220
<60 QT650 500 650/850 12 –
60<d<160</d QT650 500 650/850 10 –
X39CrMo17-1 1.4122 – A – max. 900 – 280
<60 QT750 550 750/950 12 –
60<d<160</d QT750 550 750/950 12 –
X17CrNi16-2 1.4057 – A – max. 950 – 295
<60 QT800 600 800/950 14 –
60<d<160</d QT800 600 800/950 12 –
<60 QT900 700 900/1050 12 –
60<d<160</d QT900 700 900/1050 10 –
X3CrNiMo13-4 1.4313 – A – 1100 – 320
<160 QT700 520 700/850 15 –
160<d<250</d QT700 520 700/850 12 –
<160 QT780 620 780/980 15 –
160<d<250</d QT780 620 780/980 12 –
<160 QT900 800 900/1100 12 –
160<d<250</d QT900 800 900/1100 10 –
X4CrNiMo16-5-1 1.4418 – A – 1100 – 320
<160 QT760 550 760/960 16 –
160<d<250</d QT760 550 760/960 14 –
<160 QT900 700 900/1100 16 –
160<d<250</d QT900 700 900/1100 14 –
Martensitic stainless steels-special grades
X29CrS13 1.4029 <160 A – max. 800 – 245
<160 QT850 650 850/1000 9 –
X46CrS13 1.4035 < 63 A – max. 800 245
X70CrMo15 1.4109 <100 A – max. 900 – 280
X40CrMoVN 1.4123 <100 A – – – 280
X105CrMo17 1.4125 <100 A – – – 285
X90CrMoV18 1.4112 <100 A – – – 265
X2CrNiMoV13-5-2 1.4415 <160 QT750 650 750/ 900 18 –
<160 QT850 750 850/1000 15 –
X53CrSiMoVN16-2 1.4150 <100 A – – – 255
QT – – – –
Precipitation hardening stainless steels-standard grades
X5CrNiCuNb16-4 1.4542 <100 AT – max. 1200 – 360
P800 520 800/950 18 –
P930 720 930/1100 16 –
P960 790 960/1160 12 –
P1070 1000 1070/1270 10 –
X7CrNiAl17-7 1.4568 <30 AT – max. 850 – 255
X5CrNiMoCuNb14-5 1.4594 <100 AT – max. 1200 – 360
P930 720 930/1100 15 –
P1000 860 1000/1200 10 –
P1070 1000 1070/1270 10 –
Precipitation hardening stainless steels-standard grades
X1CrNiMoAlTi12-9-2 1.4530 <150 AT – max.1200 363
P1200 1100 min. 1200 12
X1CrNiMoAlTi12-10-2 1.4596 < 150 AT – max 1200 363
P1400 1300 min 1400 9
X1CrNiMoAlTi12-11-2 1.4612 < 150 AT – – – 331
P1510 1380 min 1510 10
P1650 1515 min 1650 10
X5NiCrTiMoVB25-15-2 1.4606 < 50 AT 250 max 700 35 212
P880 550 880/1150 20
Note
A= annealed; QT=quenched and tempered.
Only for guidance.
for rods, only the tensile strength values apply.
Note 4 deleted
Related Articles
Chemical composition of stainless steel long products for general purposes to BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel long products to BS EN 10088-3
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.