Ambient Temperature Mechanical Properties of Martensitic And Precipitation Hardening Stainless Steel Bright Bars to BS EN 10088-3

Ambient Temperature Mechanical Properties of Martensitic And Precipitation Hardening Stainless Steel Bright Bars to BS EN 10088-3

Ambient temperature mechanical properties of martensitic and precipitation hardening stainless steel bright bars to BS EN-10088-3
The BS EN 10088-3 standard gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections
for general purposes. The properties given in this article are proof strength, tensile strength, elongation and hardness of martensitic
and precipitation hardening stainless steels.

AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF MARTENSITIC AND PRECIPITATION HARDENING STAINLESS STEEL
BRIGHT BARS TO BS EN 10088-3
Introduction
BS EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes.
The properties given in this article are proof strength, tensile strength, elongation and hardness of martensitic and precipitation hardening
stainless steels.

The data given is not intended to replace that shown in individual standards to which reference should always be made.

BS EN 10088-3:2014 Edition
BS EN 10088-3 was originally published in 1995. The second version, BS EN 10088-3:2014, has been superseded by BS EN 10088-3:2014.

The tables shown here only have the 2014 tensile property ranges of the martensitic and precipitation hardening steels. Two new grades were added:

1.4150, 1.4612 (Neither grade has properties defined for bright bar).

There were changes to the mechanical properties for bright bar for the following grades;

1.4028, 1.4122, 1.4057.

This article is specifically for bright products.

BS EN 10088-3 mechanical properties – martensitic and precipitation hardening stainless steels bright bar including lengths cut from wire

Designation Max Thickness mm 1) Mechanical properties min unless stated
Annealed Heat Treated
Steel name Steel number Tensile strength Rm N/mm2 max Hardness HB max 2) Heat Treatment Condition Proof strength Rp0.2 N/mm2 Tensile strength Rm N/mm2 Elongation A %3)
Standard Martensitic Grades
X12Cr13 1.4006 104) 880 280 QT650 550 700/1000 9
10<16 880 280 500 700/1000 9
16<40 800 250 450 650/930 10
40<63 760 230 450 650/880 10
63<160 730 220 450 650/850 15
X12CrS13 1.4005 104) 880 280 QT650 550 700/1000 8
10<16 880 280 500 700/1000 8
16<40 800 250 450 650/930 10
40<63 760 230 450 650/880 10
63<160 730 220 450 650/850 12
X20Cr13 1.4021 104) 910 290 QT700 600 750/1000 8
10<16 910 290 550 750/1000 8
16<40 850 260 500 700/950 10
40<63 800 250 500 700/900 12
63<160 760 230 500 700/850 13
X30Cr13 1.4028 104) 950 305 QT850 700 900/1050 7
10<16 950 305 650 900/1150 7
16<40 900 280 650 850/1100 9
40<63 840 260 650 850/1050 9
63<160 800 245 650 850/1000 10
X39Cr13 1.4031 104) 950 305 QT800 700 850/1100 7
10<16 950 305 700 850/1100 7
16<40 900 280 650 800/1050 8
40<63 840 260 650 800/1000 8
63<160 800 245 650 800/1000 10
X46Cr13 1.4034 104) 950 305 QT850 700 900/1150 7
10<16 950 305 700 900/1150 7
16<40 900 280 650 850/1100 8
40<63 840 260 650 850/1000 8
63<160 800 245 650 850/1000 10
X14CrMoS17 1.4104 104) 880 280 QT650 580 700/980 7
10<16 880 280 530 700/980 7
16<40 800 250 500 650/930 9
40<63 760 230 500 650/880 10
63<160 730 220 500 650/850 10
X39CrMo17-1 1.4122 104) 1000 340 QT750 650 800/1050 8
10<16 1000 340 600 800/1050 8
16<40 980 310 550 800/1000 10
40<63 930 290 550 750/950 12
63<160 900 280 550 750/950 12
X17CrNi16-2 1.4057 104) 1050 330 QT800 750 850/1100 7
10<16 1050 330 700 850/1100 7
16<40 1000 310 650 800/1050 9
40<63 950 295 650 800/1000 12
63<160 950 295 650 800/950 12
X4CrNiMo16-5-1 1.4418 104) 1150 380 QT900 750 900/1150 10
10<16 1150 380 750 900/1150 10
16<40 1100 320 700 900/1100 12
40<63 1100 320 700 900/1100 16
63<160 1100 320 700 900/1100 16
160<250 1100 320 700 900/1100 14
Special Martensitic Grades
X29CrS13 1.4029 104) 950 305 QT850 750 900/1100 8
10<16 950 305 700 900/1100 8
16<40 900 280 650 850/1100 10
40<63 840 260 650 850/1050 10
63<160 800 245 650 850/1000 12
X46CrS13 1.4035 104) 880 280 – – – –
10<16 880 280 – – –
16<40 800 250 – – –
40<63 760 230 – – –
Standard Precipitation Hardening Grades
X5CrNiCuNb16-4 1.4542 104) 1200 360 P800 600 900/1100 10
10<16 1200 360 600 900/1100 10
16<40 1200 360 520 800/1050 12
40<63 1200 360 520 800/1000 18
63<160 1200 360 520 800/950 18
<100 – – P930 720 930/1100 12
<100 – – P960 790 960/1160 10
<100 – – P1070 1000 1070/1270 10
Special Precipitation Hardening Grades
X5NiCrTiMoVB25-15-2 1.4606 104) 850 240 P880 750 950/1200 15
10<16 800 230 750 950/1150 15
16<40 800 230 600 900/1150 18
40<63 700 212 550 880/1150 20
Note

Width across flats for hexagons.
For information only.
Elongation is valid only for dimensions of 5mm and above. For smaller diameters, the minimum elongation has to agreed
upon at the time of the enquiry and order
In the range 1mm<<5mm valid only for rounds. The mechanical properties of non round bars with thicknesses < 5mm have
to be agreed at the time of the enquiry and order

Related Articles
Chemical composition of stainless steel long products for general purposes to BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of martensitic and precipitation hardening stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of austenitic stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of cold worked wire to EN 10088-3
Ambient temperature mechanical properties of austenitic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel bright bars to BS EN 10088-3

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers

Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com

Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.