Ambient Temperature Mechanical Properties of Ferritic Stainless Steel Bright Bars To BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel bright bars to BS EN-10088-3
The BS EN 10088-3 standard gives the mechanical properties for ferritic stainless steel semi-finished products,
bars, rods, wires, sections for general purposes. The current edition was published in October 2014.
The properties given are proof strength, tensile strength, elongation and hardness for Bright Bars.
AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF FERRITIC STAINLESS STEEL BRIGHT BARS TO BS EN 10088-3
Introduction
BS EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections
for general purposes. This article covers ferritic stainless steels supplied as bright bars The properties given are proof strength,
tensile strength, elongation and hardness.
The data given is not intended to replace that shown in individual standards to which reference should always be made.
BS EN 10088-3:2014 Edition
BS EN 10088-3 was originally published in 1995. The second version, BS EN 10088-3:2014, has been superseded by BS EN 10088-3:2014.
The tables shown here only have the 2014 tensile property ranges of the ferritic steels. Three new ferritic grades 1.4611, 1.4621,
and 1.4613 have been added. However, none of these grades have any properties defined for bright bar.
This article covers bright products.
BS EN 10088-3 mechanical properties – ferritic stainless steels bright bar including lengths cut from wire
Designation Mechanical properties min unless stated
Steel name Steel number Max Thickness or diameter mm 1) Proof strength Rp0.2 N/mm2 Tensile strength Rm N/mm2 Elongation A 2) %
Standard Grades
X6Cr17 1.4016 103) 320 500/750 8
10<t<16</t 300 480/750 8
16<t<40</t 240 400/700 15
40<t<63</t 240 400/700 15
63<t<100</t 240 400/630 20
X6CrMoS17 1.4105 103) 330 530/780 7
10<t<16</t 310 500/780 7
16<t<40</t 250 430/730 12
40<t<63</t 250 430/730 12
63<t<100</t 250 430/630 20
X6CrMo17-1 1.4113 103) 340 540/700 8
10<t<16</t 320 500/700 12
16<t<40</t 280 440/700 15
40<t<63</t 280 440/700 15
63<t<100</t 280 440/660 18
Special Grades
X2CrTi17 1.4520 103) 320 500/750 8
10<t<16</t 300 480/750 10
16<t<40</t 240 400/700 15
40<t<50</t 240 400/700 15
X3CrNb17 1.4511 103) 320 500/750 8
10<t<16</t 300 480/750 10
16<t<40</t 240 400/700 15
40<t<50</t 240 400/700 15
X6CrMoNb17-1 1.4526 103) 340 540/700 8
10<t<16</t 320 500/700 12
16<t<40</t 280 440/700 15
40<t<50</t 280 440/700 15
X2CrTiNb18 1.4509 103) 320 500/750 8
10<t<16</t 300 480/750 10
16<t<40</t 240 400/700 15
40<t<50</t 240 400/700 15
Note
Width across flats for hexagons.
Elongation is valid only for dimensions of 5mm and above. For smaller diameters, the minimum elongation has to
agreed upon at the time of the enquiry and order
In the range 1mm<t<5mm valid only for rounds. The mechanical properties of non round bars with thicknesses
<5mm have to be agreed at the time of the enquiry and order
The ferritic steels are in the annealed condition. The annealing treatment may be omitted, if the conditions for hot working
and subsequent cooling are such that the requirements for the mechanical properties of the product and the resistance to
intergranular corrosion as defined in EN ISO 3651-2 are obtained.
Related Articles
Ambient temperature mechanical properties of austenitic stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of austenitic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of cold worked wire to EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of martensitic and precipitation hardening stainless steel bright bars to BS EN 10088-3
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.