Ambient Temperature Mechanical Properties of Austenitic Stainless Steel Long Products To BS EN 10088-3
Ambient temperature mechanical properties of austenitic stainless-steel long product to BS EN-10088-3
The BS EN 10088-3 standard gives the mechanical properties for stainless steel semi-finished products, bars,
rods and sections for general purposes. The properties given in this article are proof strength, tensile strength,
elongation and hardness of austenitic stainless steels.
AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF AUSTENITIC STAINLESS STEEL LONG PRODUCTS TO BS EN 10088-3
Introduction
BS EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes.
The properties given in this article are proof strength, tensile strength, elongation and hardness of austenitic stainless steels.
The data given is not intended to replace that shown in individual standards to which reference should always be made.
BS EN 10088-3:2014 Edition
BS EN 10088-3 was originally published in 1995. The second version, BS EN 10088-3:2005, has been superseded by BS EN 10088-3:2014.
The tables shown here only have the 2014 tensile property ranges of the austenitic steels. New grades have been added as follows:
4 austenitic grades 1.4615, 1.4646, 1.4020, 1.4378.
The mechanical properties of the grade 1.4372 have been changed.
This article does not include bright products.
BS EN 10088-3 mechanical properties – austenitic stainless steels
Designation Mechanical properties min unless stated
Steel name Steel number Max thickness (unless stated)mm Proof strength Tensile strength Rm N/mm2),3) Elongation A %2),3) Hardness 1),2) HB
Rp0.23) N/mm2 Rp1.03) N/mm2
Austenitic stainless steels-standard grades
X10CrNi18-8 1.4310 40 195 230 500/750 40 230
X2CrNi18-9 1.4307 160 175 210 500/700 45 215
160<d<250</d 175 210 500/700 35 215
X2CrNi19-11 1.4306 160 180 215 460/680 45 215
160<d<250</d 180 215 460/680 35 215
X2CrNiN18-10 1.4311 160 270 305 550/760 40 230
160<d<250</d 270 305 550/760 30 230
X5CrNi18-10 1.4301 160 190 225 500/700 45 215
160<d<250</d 190 225 500/700 35 215
X8CrNiS18-9 1.4305 160 190 225 500/750 35 230
X6CrNiTi18-10 1.4541 160 190 225 500/700 40 215
160<d<250</d 190 225 500/700 30 215
X4CrNi18-12 1.4303 160 190 225 500/700 45 215
160<d<250</d 190 225 500/700 35 215
X2CrNiMo17-12-2 1.4404 160 200 235 500/700 40 215
160<d<250</d 200 235 500/700 30 215
X2CrNiMoN17-11-2 1.4406 160 280 315 580/800 40 250
160<d<250</d 280 315 580/800 30 250
X5CrNiMo17-12-2 1.4401 160 200 235 500/700 40 215
160<d<250</d 200 235 500/700 30 215
X6CrNiMoTi17-12-2 1.4571 160 200 235 500/700 40 215
160<d<250</d 200 235 500/700 30 215
X2CrNiMo17-12-3 1.4432 160 200 235 500/700 40 215
160<d<250</d 200 235 500/700 30 215
X2CrNiMoN17-13-3 1.4429 160 280 315 580/800 40 250
160<d<250</d 280 315 580/800 30 250
X3CrNiMo17-13-3 1.4436 160 200 235 500/700 40 215
160<d<250</d 200 235 500/700 30 215
X2CrNiMo18-14-3 1.4435 160 200 235 500/700 40 215
160<d<250</d 200 235 500/700 30 215
X2CrNiMoN17-13-5 1.4439 160 280 315 580/800 35 250
160<d<250</d 280 315 580/800 30 250
X6CrNiCuS18-9-2 1.4570 160 185 220 500/710 35 215
X3CrNiCu18-9-4 1.4567 160 175 210 450/650 45 215
X1NiCrMoCu25-20-5 1.4539 160 230 260 530/730 35 230
160<d<250</d 230 260 530/730 30 230
Austenitic stainless steels-special grades
X5CrNi17-7 1.4319 16 190 225 500/700 45 215
X9CrNi18-9 1.4325 40 190 225 550/750 40 215
X5CrNiN19-9 1.4315 40 270 310 550/750 40 215
X6CrNiNb18-10 1.4550 160 205 240 510/740 40 230
160<d<250</d 205 240 510/740 30 230
X1CrNiMoN25-22-2 1.4466 160 250 290 540/740 35 240
160<d<250</d 250 290 540/740 30 240
X6CrNiMoNb17-12-2 1.4580 160 215 250 510/740 35 230
160<d<250</d 215 250 510/740 30 230
X2CrNiMo18-15-4 1.4438 160 200 235 500/700 40 215
160<d<250</d 200 235 500/700 30 215
X1CrNiMoCuN24-22-8 1.4652 50 430 470 750/1000 40 310
X1CrNiSi18-15-4 1.4361 210 240 530/730 40 230
<d</d 210 240 530/730 30 230
X11CrNiMnN19-8-6 1.4369 15 340 370 750/950 35 300
X13MnNiN18-13-2 1.4020 160 380 420 690/850 30 220
160<d<250</d
X6CrMnNiN18-13-3 1.4378 160 380 420 690/830 30 220
160<250
X6CrMnNiCuN18-12-4-2 1.4646 8 380 400 650/850 30 260
X12CrMnNiN17-7-5 1.4372 160 230 370 750/950 40 260
160<d<250</d 230 370 750/950 35 260
X8CrMnNiN18-9-5 1.4374 10 350 380 700/900 35 260
X8CrMnCuNB17-8-3 1.4597 160 270 305 560/780 40 245
X3CrMnNiCu15-8-5-3 1.4615 160 175 210 400/600 45 180
X3CrNiCu19-9-2 1.4560 160 170 220 450/650 45 215
X3CrNiCuMo17-11-3-2 1.4578 160 175 – 450/650 45 215
X1NiCrMoCu31-27-4 1.4563 160 220 250 500/750 35 230
160<d<250</d 220 250 500/750 30 230
X1CrNiMoCuN25-25-5 1.4537 160 300 340 600/800 35 250
160<d<250</d 300 340 600/800 30 250
X1CrNiMoCuN20-18-7 1.4547 160 300 340 650/850 35 260
160<d<250</d 300 340 650/850 30 260
X2CrNiMoCuS17-10-2 1.4598 160 200 235 500/700 40 215
X1CrNiMoCuNW24-22-6 1.4659 160 420 460 800/1000 50 290
X1NiCrMoCuN25-20-7 1.4529 160 300 340 650/850 40 250
160<d<250</d 300 340 650/850 35 250
X2CrNiMnMoN25-18-6-5 1.4565 160 420 460 800/950 35 –
Note
Only for guidance.
The maximum HB-values may be raised by 100 HB or tensile strength value may be raised by 200 N/mm2 and
the minimum elongation value be lowered to 20% for sections and bars of <35mm thickness having a final cold
deformation and for hot formed sections and bars of <8mm thickness
For rods, only the tensile strength values apply.
These properties are for austenitic steels in the solution annealed condition. The solution treatment may be omitted,
if the conditions for hot working and subsequent cooling are such that the requirements for the mechanical properties
of the product and the resistance to intergranular corrosion as defined in EN ISO 3651-2 are obtained.
Related Articles
Chemical composition of stainless steel long products for general purposes to BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of martensitic and precipitation hardening stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel long products to BS EN 10088-3
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
Top Leading Steel Maker Manufacture In The World
Shandong Iron and Steel Group (China)
PAO Severstal (Russia)
Thyssenkrupp Ag (Germany)
Voestalpine AG (Austria)
CITIC Pacific Special Steel Holdings (China)
SSAB AB (Sweden)
Hebei Puyong Iron and Steel Group Co., Ltd. (China)
Tata Steel (India)
China Steel Corporation (China)
JFE Steel Corporation (Japan)
Nippon Steel Corporation (Japan)
Daido Steel (Japan)
HBIS Group (China)
Baosteel Group Corporation (China)
Gerdau S.A. (Brazil)
Metinvest Holding, LLC (Ukraine)
Nucor Corporation (U.S.)
Hyundai Steel Company (South Korea)
Novolipetsk Steel (NLMK) (Russia)
JSW Steel (India)
United States Steel Corporation (U.S.)
Posco Iron And Steel Group (South Korea)
Hyundai Steel (South Korea)
ArcelorMittal S.A. (Luxembourg)
Steel Authority of India SAIL (India)
Jindal Steel And Power (India)
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.