Ambient Temperature Mechanical Properties of Austenitic Stainless Steel Flat Products To BS EN 10088-2
Ambient temperature mechanical properties of austenitic stainless-steel flat product to BS EN-10088-2
BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes.
The current edition was published in October 20014. Mechanical properties are specified, including proof
and tensile strength, elongation and impact strength. The tensile properties only are tabulated in this article.
LAST UPDATED 25th NOVEMBER 2014.
AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF AUSTENITIC STAINLESS STEEL FLAT PRODUCTS TO BS EN 10088-2
Introduction
BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes.
This article gives the 0.2% and 1.0% proof strength, tensile strength and elongation of the 44 austenitic grades specified.
The standard also specifies includes impact properties and resistance to intergranular corrosion acceptance criteria.
For reasons of space, these are omitted from the tables shown here.
As an alternative to scanning down the list try the ‘find’ facility on your keyboard, using the ‘Ctrl’ and ‘F’ keys together.
Type in the term you are looking for in the dialog box that then appears.
The data given is not intended to replace that shown in individual standards to which reference should always be made.
BS EN 10088-2:2014 Edition
BS EN 10088-2 was originally published in 1995. The second version BS EN 10088-2:2005 has been superseded BS EN 10088-2:2014.
The tables shown here only have the 2014 tensile property ranges of the austenitic steels. Four new austenitic grades,
1.4618, 1.4376, 1.4640 and 1.4646 have been added.
The only changes to tensile properties for austenitic grades is in 1.4372.
BS EN 10088-2 mechanical properties – austenitic stainless steels
Designation Mechanical properties min unless stated
Steel name Steel number Product Proof strength Tensile strength Rm N/mm2 Elongation5),6) %
Form2) Max thickness mm Rp0.23),4) N/mm2 Rp1.03),4) N/mm2
Austenitic stainless steels in the solution annealed condition1) – standard grades
X10CrNi18-8 1.4310 C 8 250 280 600/950 40
X2CrNiN18-7 1.4318 C 8 350 380 650/850 40
H 13.5 330 370 650/850 40
P 75 330 370 630/830 45
X2CrNi18-9 1.4307 C 8 220 250 520/700 45
H 13.5 200 240 520/700 45
P 75 200 240 500/700 45
X2CrNi19-11 1.4306 C 8 220 250 520/700 45
H 13.5 200 240 520/700 45
P 75 200 240 500/700 45
X2CrNiN18-10 1.4311 C 8 290 320 550/750 40
H 13.5 270 310 550/750 40
P 75 270 310 550/750 40
X5CrNi18-10 1.4301 C 8 230 260 540/750 45
H 13.5 210 250 520/720 45
P 75 210 250 520/720 45
X8CrNiS18-9 1.4305 P 75 190 230 500/700 35
X6CrNiTi18-10 1.4541 C 8 220 250 520/720 40
H 13.5 200 240 520/720 40
P 75 200 240 500/700 40
X4CrNi18-12 1.4303 C 8 220 250 500/650 45
X2CrNiMo17-12-2 1.4404 C 8 240 270 530/680 40
H 13.5 220 260 530/680 40
P 75 220 260 520/670 45
X2CrNiMoN17-11-2 1.4406 C 8 300 330 580/780 40
H 13.5 280 320 580/780 40
P 75 280 320 580/780 40
X5CrNiMo17-12-2 1.4401 C 8 240 270 530/680 40
H 13.5 220 260 530/680 40
P 75 220 260 520/670 45
X6CrNiMoTi17-12-2 1.4571 C 8 240 270 540/690 40
H 13.5 220 260 540/690 40
P 75 220 260 520/670 40
X2CrNiMo17-12-3 1.4432 C 8 240 270 550/700 40
H 13.5 220 260 550/700 40
P 75 220 260 520/670 45
X2CrNiMo18-14-3 1.4435 C 8 240 270 550/700 40
H 13.5 220 260 550/700 40
P 75 220 260 520/670 45
X2CrNiMoN17-13-5 1.4439 C 8 290 320 580/780 35
H 13.5 270 310 580/780 35
P 75 270 310 580/780 40
X1NiCrMoCu25-20-5 1.4539 C 8 240 270 530/730 35
H 13.5 220 260 530/730 35
P 75 220 260 520/720 35
Austenitic stainless steels in the solution annealed condition1) – special grades
X5CrNi17-7 1.4319 C 3 230 260 550/750 45
H 6 230 260 550/750 45
X5CrNiN19-9 1.4315 C 8 290 330 500/720 40
H 13.5 270 310 500/750 40
P 75 270 310 500/750 40
X5CrNiCu19-6-2 1.4640 C 8 230 260 540/750 45
H 13.5 210 240 520/720 45
X1CrNi25-21 1.4335 P 75 200 240 470/670 40
X6CrNiNb18-10 1.4550 C 8 220 250 520/720 40
H 13.5 200 240 520/720 40
P 75 200 240 500/700 40
X1CrNiMn25-22-2 1.4466 P 75 250 290 540/740 40
X6CrNiMoN17-13-2 1.4580 P 75 220 260 520/720 40
X2CrNiMoN17-13-3 1.4429 C 8 300 330 580/780 35
H 13.5 280 320 580/780 35
P 75 280 320 580/780 40
X3CrNiMo17-13-3 1.4436 C 8 240 270 550/700 40
H 13.5 220 260 550/700 40
P 75 220 260 530/730 40
X2CrNiMoN18-12-4 1.4434 C 8 290 320 570/770 35
H 13.5 270 310 570/770 35
P 75 270 310 540/740 40
X2CrNiMo18-15-4 1.4438 C 8 240 270 550/700 35
H 13.5 220 260 550/700 35
P 75 220 260 520/720 40
X1CrNiMoCuN24-22-8 1.4652 C 8 430 470 750/1000 40
H 13.5 430 470 750/1000 40
P 75 430 470 750/1000 40
X1CrNiSi18-15-4 1.4361 P 75 220 260 530/730 40
X11CrNiMnN19-8-6 1.4369 C 4 340 370 750/950 35
X6CrMnNiCuN18-12-4-2 1.4646 C 8 380 400 650/850 30
X12CrMnNiN17-7-5 1.4372 C 8 350 380 680/780 45
H 13.5 330 370 680/880 40
P 75 330 370 750/950 40
X2CrMnNiN17-7-5 1.4371 C 8 300 330 650/850 45
H 13.5 280 320 650/850 45
P 75 280 320 630/830 35
X9CrMnNiCu17-8-5-2 1.4618 C 8 230 250 540/850 45
H 13.5 230 250 520/830 45
P 75 210 240 520/830 45
X12CrMnNiN18-9-5 1.4373 C 8 340 370 680/880 45
H 13.5 320 360 680/880 45
P 75 320 360 600/800 35
X8CrMnCuNB17-8-3 1.4597 C 8 300 330 580/780 40
H 13.5 300 330 580/780 40
X8CrMnNi19-6-3 1.4376 C 4 400 420 600/900 40
H 13.5 400 420 600/900 40
X1NiCrMoCu31-27-4 1.4563 P 75 220 260 500/700 40
X1CrNiMoCuN25-25-5 1.4537 P 75 290 330 600/800 40
X1CrNiMoCuN20-18-7 1.4547 C 8 320 350 650/850 35
H 13.5 300 340 650/850 35
P 75 300 340 650/850 40
X1CrNiMoCuNW24-22-6 1.4659 P 75 420 460 800/1000 40
X1NiCrMoCuN25-20-7 1.4529 P 75 300 340 650/850 40
X2CrNiMnMoN25-18-6-5 1.4565 C 8 420 460 800/950 30
H 10 420 460 800/950 30
P 40 420 460 800/950 30
Note
The solution treatment may be omitted if the conditions for hot working and subsequent cooling are such that the
requirements for the mechanical properties of the product and the resistance to intergranular corrosion as defined
in EN ISO 3651-2 are obtained.
C= Cold rolled strip; H= hot rolled strip; P= hot rolled plate.
If, in the case of strip in rolling widths<300mm, longitudinal test pieces are taken, the minimum values are reduced as follow:
proof strength: minus 15N/mm2
elongation for constant gauge length: minus 5%
elongation for proportional gauge length: minus 2%
For continuously hot rolled products, 20N/mm2 higher minimum values of Rp0.2 and 10N/mm2higher minimum values
of Rp1.0 may be agreed at the time of enquiry and order.
The values apply for test pieces with a gauge length of 80mm and a width of 20mm. Test pieces with a gauge length of
50mm and a width of 12.5mm can also be used.
The values apply for test pieces with a gauge length of 5.65 So0.5
Related Articles
Chemical composition of stainless steel flat products for general purposes to BS EN 10088-2
Ambient temperature mechanical properties of ferritic stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of martensitic stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of precipitation hardening stainless steel flat products to BS EN 10088-2
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel flat products to BS EN 10088-2
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
Top Leading Steel Maker Manufacture In The World
Shandong Iron and Steel Group (China)
PAO Severstal (Russia)
Thyssenkrupp Ag (Germany)
Voestalpine AG (Austria)
CITIC Pacific Special Steel Holdings (China)
SSAB AB (Sweden)
Hebei Puyong Iron and Steel Group Co., Ltd. (China)
Tata Steel (India)
China Steel Corporation (China)
JFE Steel Corporation (Japan)
Nippon Steel Corporation (Japan)
Daido Steel (Japan)
HBIS Group (China)
Baosteel Group Corporation (China)
Gerdau S.A. (Brazil)
Metinvest Holding, LLC (Ukraine)
Nucor Corporation (U.S.)
Hyundai Steel Company (South Korea)
Novolipetsk Steel (NLMK) (Russia)
JSW Steel (India)
United States Steel Corporation (U.S.)
Posco Iron And Steel Group (South Korea)
Hyundai Steel (South Korea)
ArcelorMittal S.A. (Luxembourg)
Steel Authority of India SAIL (India)
Jindal Steel And Power (India)
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.