Ambient Temperature Mechanical Properties of Austenitic Stainless Steel Bright Bars To BS EN 10088-3
Ambient temperature mechanical properties of austenitic stainless-steel bright bar to BS EN-10088-3
The BS EN 10088-3 standard gives the mechanical properties for stainless steel semi-finished products,
bars, rods and sections for general purposes. The properties given in this article are proof strength,
tensile strength, elongation and hardness of austenitic stainless steels.
AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF AUSTENITIC STAINLESS STEEL BRIGHT BARS TO BS EN 10088-3
Introduction
BS EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes.
The properties given in this article are proof strength, tensile strength, elongation and hardness of austenitic stainless steels.
The data given is not intended to replace that shown in individual standards to which reference should always be made.
BS EN 10088-3:2014 Edition
BS EN 10088-3 was originally published in 1995. The second version, BS EN 10088-3:2005, has been superseded by BS EN 10088-3:2014.
The tables shown here only have the 2014 tensile property ranges of the austenitic steels. 4 new grades have been added as follows:
1.4615, 1.4646, 1.4020, 1.4378, (of these only 1.4020 and 1.4378 have defined properties for bright bar).
The mechanical properties of the following grades have been changed;
1.4305, 1.4529.
This article is specifically for bright products which were introduced in the 2005 edition.
BS EN 10088-3 mechanical properties – austenitic stainless steels bright bar including lengths cut from wire
Designation Mechanical properties min unless stated
Steel name Steel number Max Thickness mm 1) Proof strength Rp0.2 N/mm2 Tensile strength Rm N/mm2 Elongation A 2) %
Standard Grades
X2CrNi18-9 1.4307 103) 400 600/930 25
10<16 380 600/930 25
16<40 175 500/830 30
40<63 175 500/830 30
63<160 175 500/700 45
160<250 175 500/700 35
X2CrNi19-11 1.4306 103) 400 600/930 25
10<16 380 600/930 25
16<40 180 460/830 30
40<63 180 460/830 30
63<160 180 460/680 45
160<250 180 460/680 35
X5CrNi18-10 1.4301 103) 400 600/950 25
10<16 400 600/950 25
16<40 190 600/850 30
40<63 190 580/850 30
63<160 190 500/700 45
160<250 190 500/700 35
X8CrNiS18-9 1.4305 103) 400 600/950 15
10<16 400 600/950 15
16<40 190 500/850 20
40<63 190 500/850 20
63<160 190 500/750 35
X6CrNiTi18-10 1.4541 103) 400 600/950 25
10<16 380 580/950 25
16<40 190 500/850 30
40<63 190 500/850 30
63<160 190 500/700 40
X2CrNiMo17-12-2 1.4404 103) 400 600/930 25
10<16 380 580/930 25
16<40 200 500/830 30
40<63 200 500/830 30
63<160 200 500/700 40
160<250 200 500/700 30
X5CrNiMo17-12-2 1.4401 103) 400 600/950 25
10<16 380 580/950 25
16<40 200 500/850 30
40<63 200 500/850 30
63<160 200 500/700 40
160<250 200 500/700 30
X6CrNiMoTi17-12-2 1.4571 103) 400 600/950 25
10<16 380 580/950 25
16<40 200 500/850 30
40<63 200 500/850 30
63<160 200 500/700 40
160<250 200 500/700 30
X2CrNiMo17-12-3 1.4432 103) 400 600/930 25
10<16 380 600/880 25
16<40 200 500/850 30
40<63 200 500/850 30
63<160 200 500/700 40
160<250 200 500/700 30
X3CrNiMo17-13-3 1.4436 103) 400 600/950 25
10<16 400 600/950 25
16<40 200 500/850 30
40<63 190 500/850 30
63<160 200 500/700 40
160<250 200 500/700 30
X2CrNiMo18-14-3 1.4435 103) 400 600/950 25
10<16 400 600/950 25
16<40 235 500/850 30
40<63 235 500/850 30
63<160 235 500/700 40
160<250 235 500/700 30
X6CrNiCuS18-9-2 1.4570 103) 400 600/950 15
10<16 400 600/950 15
16<40 185 500/910 20
40<63 185 500/910 20
63<160 185 500/710 35
X3CrNiCu18-9-4 1.4567 103) 400 600/850 25
10<16 340 600/850 25
16<40 175 450/800 30
40<63 175 450/800 30
63<160 175 450/650 40
X1NiCrMoCu25-20-5 1.4539 103) 400 600/930 20
10<16 400 600/930 20
16<40 230 530/880 25
40<63 230 530/880 25
63<160 230 530/730 35
160<250 230 530/730 30
Special Grades
X3CrNiCu19-9-2 1.4560 103) 400 600/800 25
10<16 340 600/800 25
16<40 175 450/750 30
40<63 175 450/750 30
63<160 175 450/650 45
X13CrMnNiN18-13-2 1.4020 103) 500 750/1000 20
10<16 450 730/950 25
16<40 400 690/950 30
X6CrMnNiN18-13-3 1.4378 103) 450 720/950 20
10<16 400 700/900 25
16<40 380 690/880 30
X3CrNiCuMo17-11-3-2 1.4578 103) 400 600/850 20
10<16 340 600/850 20
16<40 175 450/800 30
40<63 175 450/800 30
63<160 175 450/650 45
X2CrNiMoCuS17-10-2 1.4598 103) 400 600/930 15
10<16 400 600/900 20
16<40 200 500/850 25
40<63 200 500/800 30
63<160 200 500/700 40
X1NiCrMoCuN25-20-7 1.4529 103) 550 700/1150 15
10<16 550 700/1150 15
16<40 300 650/1050 30
40<63 300 650/900 30
63<160 300 650/850 40
Note
Width across flats for hexagons.
Elongation is valid only for dimensions of 5mm and above. For smaller diameters, the minimum elongation
has to agreed upon at the time of the enquiry and order
In the range 1mm<t<5mm valid only for rounds. The mechanical properties of non round bars with thicknesses
< 5mm have to be agreed at the time of the enquiry and order
The austenitic steels are in the annealed condition. The annealing treatment may be omitted, if the conditions
for hot working and subsequent cooling are such that the requirements for the mechanical properties of the
product and the resistance to intergranular corrosion as defined in EN ISO 3651-2 are obtained.
Related Articles
Chemical composition of stainless steel long products for general purposes to BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of martensitic and precipitation hardening stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel bright bars to BS EN 10088-3
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
Top Leading Steel Maker Manufacture In The World
Shandong Iron and Steel Group (China)
PAO Severstal (Russia)
Thyssenkrupp Ag (Germany)
Voestalpine AG (Austria)
CITIC Pacific Special Steel Holdings (China)
SSAB AB (Sweden)
Hebei Puyong Iron and Steel Group Co., Ltd. (China)
Tata Steel (India)
China Steel Corporation (China)
JFE Steel Corporation (Japan)
Nippon Steel Corporation (Japan)
Daido Steel (Japan)
HBIS Group (China)
Baosteel Group Corporation (China)
Gerdau S.A. (Brazil)
Metinvest Holding, LLC (Ukraine)
Nucor Corporation (U.S.)
Hyundai Steel Company (South Korea)
Novolipetsk Steel (NLMK) (Russia)
JSW Steel (India)
United States Steel Corporation (U.S.)
Posco Iron And Steel Group (South Korea)
Hyundai Steel (South Korea)
ArcelorMittal S.A. (Luxembourg)
Steel Authority of India SAIL (India)
Jindal Steel And Power (India)
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.