Ambient Temperature Mechanical Properties of Austenitic-Ferritic (Duplex) Stainless Steel Bright Bars To BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless-steel bright bar to BS EN-10088-3
The BS EN 10088-3 standard gives the mechanical properties for stainless steel semi-finished products, bars, rods
and sections for general purposes. The properties given in this article are proof strength, tensile strength, elongation
and hardness of austenitic-ferritic stainless steels.
AMBIENT TEMPERATURE MECHANICAL PROPERTIES OF AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEEL BRIGHT BARS TO BS EN 10088-3
Introduction
BS EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes.
The properties given in this article are proof strength, tensile strength, elongation and hardness of austenitic-ferritic (duplex) stainless steels.
The data given is not intended to replace that shown in individual standards to which reference should always be made.
BS EN 10088-3:2014 Edition
BS EN 10088-3 was originally published in 1995. The second version, BS EN 10088-3:2005, has been superseded by
BS EN 10088-3:2014. 4 new grades were added:
1.4062, 1.4162, 1.4662, 1.4482
The tables shown here only have the 2014 tensile property ranges of the austenitic-ferritic steels.
This article is specifically for bright products.
BS EN 10088-3 mechanical properties – austenitic-ferritic (duplex) stainless steels bright bar including lengths cut from wire
Designation Mechanical properties min unless stated
Steel name Steel number Max Thickness mm 1) Proof strength Rp0.2 N/mm2 Tensile strength Rm N/mm2 Elongation A 2) %
Standard Grades
X3CrNiMoN27-5-2 1.4460 103) 610 770/1030 12
10<t<16</t 560 770/1030 12
16<t<40</t 460 620/950 15
40<t<63</t 460 620/950 15
63<t<160</t 460 620/880 20
X2CrNiMoN22-5-3 1.4462 103) 650 850/1150 12
10<t<16</t 650 850/1100 12
16<t<40</t 450 650/1000 15
40<t<63</t 450 650/1000 15
63<t<160</t 450 650/880 25
Special Grades
X2CrNiN22-2 1.4062 16 600 650/1100 15
16<40 500 700/1100 15
40 500 700/1100 20
X2CrMnNiN21-5-1 1.4162 103) 500 700/1050 15
10<16 500 700/1050 20
16<40 500 700/1050 20
40<160 450 650/850 30
X2CrMnNiMoN21-5-3 1.4482 160 500 800 20
X2CrNiMnMoCuN21-5-3 1.4662 103) 700 900/1150 15
10<30 700 900/1100 20
30<160 450 650/900 25
X2CrNiMoCuN25-6-3 1.4507 103) 4) 4) 4)
10<t<16</t 4) 4) 4)
16<t<40</t 500 700/1050 25
40<t<63</t 500 700/900 25
63<t<160</t 500 700/900 25
Note
Width across flats for hexagons.
Elongation is valid only for dimensions of 5mm and above. For smaller diameters, the minimum elongation has to
agreed upon at the time of the enquiry and order
In the range 1mm<t<5mm valid only for rounds. The mechanical properties of non round bars with thicknesses <5mm
have to be agreed at the time of the enquiry and order
To be agreed upon at the time of the enquiry and order
The austenitic-ferritic steels are in the annealed condition. The annealing treatment may be omitted, if the conditions for
hot working and subsequent cooling are such that the requirements for the mechanical properties of the product and the
resistance to intergranular corrosion as defined in EN ISO 3651-2 are obtained.
Related Articles
Ambient temperature mechanical properties of austenitic stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of austenitic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of cold worked wire to EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of ferritic stainless steel long products to BS EN 10088-3
Ambient temperature mechanical properties of martensitic and precipitation hardening stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel bright bars to BS EN 10088-3
Ambient temperature mechanical properties of austenitic-ferritic (duplex) stainless steel long products to BS EN 10088-3
Chemical composition of stainless steel long products for general purposes to BS EN 10088-3
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1 Mill Test Certificate,
Material Test Certificate, NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D,
IATF-16949, NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2021, API-6A (American Petroleum Institute), with EN-10204 3.2 Certificate
Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas),
DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), DGAQA Approved,
NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant, NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved,
Indian Ordnance Factory, Heavy Vehicle Factory, Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited,
Mishra Dhatu Nigam Limited (MIDHANI), Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL),
Bharat Heavy Electricals Limited (BHEL), National Thermal Power Corporation Limited (NTPC), Aerospace, Aviation, Electric Vehicles, Armour Vehicle,
Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy, Power Sector, Electronics, Power Generation,
Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers
Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, Russian, Chinese, European, Swedish, UK, American, United Kingdom, U.S.A
Top Leading Steel Maker Manufacture In The World
Shandong Iron and Steel Group (China)
PAO Severstal (Russia)
Thyssenkrupp Ag (Germany)
Voestalpine AG (Austria)
CITIC Pacific Special Steel Holdings (China)
SSAB AB (Sweden)
Hebei Puyong Iron and Steel Group Co., Ltd. (China)
Tata Steel (India)
China Steel Corporation (China)
JFE Steel Corporation (Japan)
Nippon Steel Corporation (Japan)
Daido Steel (Japan)
HBIS Group (China)
Baosteel Group Corporation (China)
Gerdau S.A. (Brazil)
Metinvest Holding, LLC (Ukraine)
Nucor Corporation (U.S.)
Hyundai Steel Company (South Korea)
Novolipetsk Steel (NLMK) (Russia)
JSW Steel (India)
United States Steel Corporation (U.S.)
Posco Iron And Steel Group (South Korea)
Hyundai Steel (South Korea)
ArcelorMittal S.A. (Luxembourg)
Steel Authority of India SAIL (India)
Jindal Steel And Power (India)
If you have any requirement of above items, please feel free to contact us
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com
ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com
CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com
Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.