Air Pre-Heater Corten Steel Tube ASTM A423 Grade-1

Air Pre-Heater Corten Steel Tube ASTM A423 Grade-1

We are Stockholder & Distributors of ASTM A423 Grade-1, ASME SA423 Grade-1 Air Pre Heater ERW Corten Steel Boiler Tubes with IBR & Non-IBR

AIR PRE-HEATER TUBES

AIR PRE-HEATER ERW TUBES

AIR PREHEATER TUBES

AIR PREHEATER ERW TUBES

AIR PRE HEATER TUBES

AIR PRE HEATER ERW TUBES

APH TUBES

APH ERW TUBES

APH CORTEN STEEL TUBES

APH CORTEN STEEL ERW TUBES

CORTEN STEEL BOILER TUBES

CORTEN STEEL ERW TUBES

ASTM A423 / ASTM A 423 TUBES

ASTM A423 / ASTM A423 CORTEN STEEL TUBES

ASTM A423 Grade-1 / ASTM A 423 Grade-1 TUBES

ASME SA423 Grade-1 / ASME SA 423 Grade-1 TUBES

ASTM A423 Grade-1 / ASME SA423 Grade-1 ERW TUBES

ASTM A 423 Grade-1 / ASME SA 423 Grade-1 ERW TUBES

ASTM A423 / A423M – 09(2014) 

Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

This specification covers standards for minimum-wall-thickness, seamless, and electric-resistance welded low-alloy steel tubes to be used for pressure containing parts, that is economizers, and for other corrosion resistant applications. Steel tubes shall either be processed to hot or cold finish. All tubes shall be normalized or given such heat treatment as may be necessary to conform to the requirements of this specification. Chemical composition shall adhere to specified carbon, manganese, phosphorus, sulfur, silicon, copper, chromium, nickel, and molybdenum contents. Tension, flattening, flaring, flange, hardness, reverse flattening, and hydrostatic tests shall be performed. Tubes when inserted in the boiler shall stand expanding and bending without showing cracks or flaws. Tubes shall also conform to tensile strength, yield strength, hardness, and elongation requirements.

1. Scope

1.1 This specification2 covers minimum-wall-thickness, seamless and electric-resistance welded, low-alloy steel tubes for pressure containing parts such as economizers or other applications where corrosion resistance is important.

1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/2 to 5 in. [12.7 to 127 mm] in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm] inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.

1.3 Mechanical property requirements do not apply to tubing smaller than 1/4 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.

1.4 An optional supplementary requirement is provided and, when desired, shall be so stated in the order.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

ASTM Standards

A450/A450M Specification for General Requirements for Carbon and Low Alloy Steel Tubes

E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing

E273 Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

Keywords

Alloy Steel – Boilers And Pressure Vessels – Corrosive Service Applications – Electric Resistance-Welded Steel Tubes – Pressure-Containing Parts – Seamless Pipes And Tubes – Seamless Steel Tubes – Welded Pipes And Tubes – Welded Steel Tubes

Carbon Steel Boiler and Heat Exchanger Tubes

ASTMASMEJIS G 3461BSDINISOABSNKLRSDNV
A178SA178 ASTB 3403059-P1 32017175 st 35.8 ABS DKSTB 33Sec 6 320Sec 4-E-TS360
   3059-P2 36017177 st 37.8     
AA179SA179 3606 320  ABS GKSTB 35Sec 6 360 
A192SA192    ABS H   
A214SA214        
A556 A2SA556 A2        
A178 CSA178 CSTB 4103059-P2 44017175 st 45.8 ABS FKSTB 42Sec 6 410Sec 4-E-TS410-1
A210 A1SA210 A1 3606 44017177 st 42.8 ABS J   
A556 B2SA556 B2        
  STB 510 17175 19Mn 5    Sec 4-E-TS510
A178 DSA178 D      Sec 6 460Sec 4-E-TS460-1
A210 CSA210 C        
A556 C2SA556 C2        

Alloy Steel Boiler and Heat Exchanger Tubes

ASTMASMEJIS G 3462BSDINISOABSNKLRSDNV
A209 T1SA209 T1STBA 123606 24317175
15Mo3		2604 II TS26ABS KKSTB 12 Sec
4-E-TS380
A250 T1SA250 T1 3606 24517177
15Mo3		2604 III TS26    
A209 T1aSA209 T1aSTBA 13   ABS L   
A250 T1aSA250 T1a        
A213 T2SA213 T2STBA 20 17175
14MoV83		2604 II TS33   Sec
4-E-TS440
A250 T2SA250 T2        
A213 T12SA213 T12STBA 223606 62017175
13CrMo44		2604 II TS32ABS OKSTB 22Sec 6
1Cr 1/2Mo-440		Sec
4-E-TS410-3
A250 T12SA250 T12   2604 III TS32    
A213 T11SA199 T11STBA 233606 621  ABS NKSTB 23 Sec
4-E-TS410-4
 SA213 T11        
A213 T22SA199 T22STBA 243606 62217175
10CrMo910		2604 II TS34ABS PKSTB 24Sec 6
2-1/2Cr 1Mo-410		Sec
4-E-TS450-2
 SA213 T22        
A213 T5SA199 T5STBA 253606 625 2604 II S37   Sec
4-E-TS430
 SA213 T5        
A213 T9SA199 T9STBA 263059-P2 622-490 2604 II S38   Sec
4-E-TS500
 SA213 T9        
A209 T1bSA209 T1b 3059-P2 24317175
17Mn4		2604 II S39ABS M Sec 6
2-1/2Cr 1Mo-490		Sec
4-E-TS450-1
   3059-P2 620-460  (=A209-
T1b)		   
A250 T1bSA250 T1b 3059-P2 629-47017175
14MoV63		2604 II S40   Sec
4-E-TS460-2
A250 T11SA250 T11 3059-P2 629-59017175 
X20CrMoV12 1		    Sec
4-E-TS590
A250 T22SA250 T22 3059-P2 762     Sec
4-E-TS610
A213 T5bSA213 T5b 3059-P2 304S51     Sec
4-E-TS690
A213 T5cSA213 T5c 3059-P2 306S51      
A213 T17SA213 T17 3059-P2 316S52      
A213 T21SA213 T21 3059-P2 316S51      
A213 T23SA213 T23 3059-P2 321S51      
A213 T91SA213 T91 3059-P2 347S51      
A213 T92SA213 T92 3059-P2 215S15      

Steel Heat Exchanger Tubes for Low Temperature Service

ASTMASMEJIS G 3464BSDINISOABSNKLRSDNV
A334 1SA334 1STBL 3803603 430LT17173 TTst35N/V     
    17174 TTst35N/V     
A334 3SA334 3STBL 4503603 503LT17173 10Ni142604 II TS43    
A334 8SA334 8STBL 6903603 509LT17173 X8Ni92604 II TS45    
A334 6SA334 6  17173 26CrMo4     
A334 7SA334 7  17173 11MnNi53     
    17174 11MnNi53     
A334 9SA334 9  17173 13MnNi63     
    17174 13MnNi63     
A334 11SA334 11  17173 12Ni19     
    17174 12Ni19     
A423 1SA423 1  (17174 10Ni14)     
A423 2SA423 2  (17174 X8Ni9)     

Steel Tubes for Fired Heater

ASTMASMEJIS G 3467ABSNKLRSDNV
A210 A1SA210 A1STFA 10    
A209 T1SA209 T1STFA 12    
A213 T12SA213 T12STFA 22    
A213 T11SA213 T11STFA 23    
A213 T22SA213 T22STFA 24    
A213 T5SA213 T5STFA 25    
A213 T9SA213 T9STFA 26    

Alloy Steel Tubes for Generator Boiler

ASTMASMEKAABSNKLRSDNV
  KA-STBA 21    
A213 T23SA213 T23KA-STBA 24J1    
A213 T91SA213 T91KA-STBA 28    

Carbon Steel Pipes for Pressure Service

ASTMASMEJIS G 3454BSDINISOABSNKLRSDNV
A53 ASA53 ASTPG 3703601 3201626 ust37.02604 II TW4ABS 2KSTPG 38Sec 2 320Sec 4-B-TS360
     2604 III TS4  Sec 2 360 
A135 ASA135 A 3601 3601626 st37.02604 II TS5ABS 8 Sec 3 320Sec 4-B-TW360
     2604 III TW5  Sec 3 360 
    1629 st37.02604 II TS6    
     2604 III TW6    
A53 BSA53 BSTPG 4103601 4301626 st44.02604 II TS9ABS 3KSTPG 42Sec 2 410Sec 4-B-TS410
     2604 III TW9   Sec 4-B-TW410
A135 BSA135 B  1629 st44.02604 II TS10ABS 9 Sec 3 410Sec 4-B-TS430
     2604 III TW10   Sec 4-B-TW430
    1626 st52.02604 II TS13  Sec 2 460Sec 4-B-TS500
     2604 III TW13   Sec 4-B-TW500
    1629 st52.02604 II TS14  Sec 2 490 
     2604 III TW14  Sec 3 460 

Carbon Steel Pipes for High Pressure Service

ASTMASMEJIS G 3455BSDINISOABSNKLRSDNV
  STS 370 1630 st37.4  KSTS 38  
  STS 410 1630 st44.42604 II TS15 KSTS 42  
  STS 480 1630 st52.42604 II TS18 KSTS 49  

Carbon Steel Pipes for High Temperature Service

ASTMASMEJIS G 3456BSDINISOABSNKLRSDNV
A106 ASA106 ASTPT 3703602 P1 36017175 st35.8 ABS 4KSTPT 38  
    17177 st37.8     
A106 BSA106 BSTPT 4103602 P1 43017175 st45.8 ABS 5KSTPT 42  
    17177 st42.8     
A106 CSA106 CSTPT 4803602 P1 500Nb17175 17Mn4  KSTPT 49  
    17175 19Mn5     

Alloy Steel Pipes for High Temperature Service

ASTMASMEJIS G 3458BSDINISOABSNKLRS
A335 P1SA335 P1STPA 12 17175
15Mo3		2604 II TS26ABS 6KSTPA 12 
    17177
15Mo3		2604 III TW26   
A335 P2SA335 P2STPA 203604 P1 660 2604 II TS32ABS 7  
     2604 III TW32   
A335 P12SA335 P12STPA 223604 P1 620-44017175
13CrMo44		 ABS 12KSTPA 22Sec 2
1Cr 1/2Mo440
        Sec 3
1Cr 1/2Mo440
A335 P11SA335 P11STPA 233604 P1 621  ABS 11KSTPA 23 
A335 P22SA335 P22STPA 243604 P1 62217175
10CrMo910		2604 II TS34ABS 13KSTPA 24Sec 2
2-1/4Cr1Mo410
A335 P5SA335 P5STPA 253604 P1 625 2604 III TS37ABS 14  
A335 P9SA335 P9STPA 263604 P1 629-470 2604 II TS38   
A335 P5b/P5cSA335 P5b/P5c 3604 P1 59117175
14MoV63		2604 II TS33  Sec 2
2-1/2Cr1Mo490
A335 P15SA335 P15 3604 P1 629-59017175
X20CrMoV12 1		2604 II TS39  Sec 2 
/2Cr1/2Mo1/4V460
A335 P21SA335 P21 3604 P1 762 2604 II TS40   
A335 P91SA335 P91       
A335 P92SA335 P92       

Steel Pipes for Low Temperature Service

ASTMASMEJIS G 3460BSDINISOABSNKLRSDNV
A333 1SA333 1STPL 3803603 430LT17173 TTst35N ABS 1LKLP ASec 4
360		Sec
4-D-TS6
    17173 TTst35V  KLP B Sec
4-D-TW6
A334 1SA334 1  17174 TTst35N  KLP C Sec
4-D-TS10
    17174 TTst35V    Sec
4-D-TW10
A333 3SA333 3STPL 4503603 503LT17173 10Ni142604 TS43ABS 4LKLP 3Sec 4
3.5Ni440		Sec
4-D-TS43
A333 8SA333 8STPL 6903603 509LT17173 X8Ni92604 TS45ABS 5LKLP 9Sec 4
9Ni690		Sec
4-D-TS45
A333 4, A334 3SA333 4, SA334 3  17173 26CrMo4 ABS 2LKLP 2Sec 4
410		Sec
4-D-TS15
         Sec
4-D-TW15
A333 6, A334 6SA333 6, SA334 6  17173 11MnNi53 ABS 3L Sec 4 
60		Sec
4-D-26CrMo4
    17174 11MnNi53    Sec
4-D-TW43
A333 7, A334 7SA333 7, SA334 7  17173 13MnNi63 ABS 6L  Sec
4-D-11MnNi53
    17174 13MnNi63    Sec
4-D-TW45
A333 9, A334 8SA333 9, SA334 8  17173 12Ni19    Sec
4-D-13MnNi63
    17174 12Ni19     
A333 10, A334 9SA333 10, SA334 9  17174 10Ni14    Sec
4-D-12Ni19
A333 11, A334 11SA333 11, SA334 11  17174 X8Ni9     

Alloy Steel Pipes for Generator Piping

ASTMASMEKABSDINISOABSNKLRSDNV
A335 P23SA335 P23KA-STPA 24J1       
A335 P91SA335 P91KA-STPA 28       

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3        
 

If you have any requirement of above items, please feel free to contact us


Regards,


CONTACT PERSON :


MUKESH SHAH        
Director         
Mobile No. 0091 – 9820292499         
Email – marketing@rolexmetals.com


ROLEX METAL DISTRIBUTORS         
( A METAL & STEEL Company )         
57-A, KHATARGALLI,         
THAKURDWAR,         
MUMBAI – 400002, INDIA.         
TEL.No. 0091-22-23858802         
TEL.No. 0091-22-23823963         
FAX No. 0091-22-23898724         
Email – marketing@rolexmetals.com         
Website – www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com

WAREHOUSE MANAGER – warehouse@rolexmetals.com

SALES DOMESTIC – salesdomestic@rolexmetals.com

SALES INTERNATIONAL – salesinternational@rolexmetals.com

SALES GENERAL – sales@rolexmetals.com

PURCHASE GENERAL – purchase@rolexmetals.com

FINANCE MANAGER – finance@rolexmetals.com

ACCOUNTS MANAGER – accounts@rolexmetals.com

GENERAL INFORMATION – info@rolexmetals.com

EXPORT MANAGER – export@rolexmetals.com

IMPORT MANAGER – import@rolexmetals.com

AIR EXPORT – airexport@rolexmetals.com

SEA EXPORT – seaexport@rolexmetals.com

CUSTOMS – customs@rolexmetals.com

AIR FREIGHT – airfreight@rolexmetals.com

SEA FREIGHT – seafreight@rolexmetals.com

DESPATCH – despatch@rolexmetals.com

INSPECTION – inspection@rolexmetals.com

LOGISTICS – logistics@rolexmetals.com

TRANSPORT – transport@rolexmetals.com

KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com

TALOJA WAREHOUSE – taloja@rolexmetals.com

KHOPOLI WAREHOUSE – khopoli@rolexmetals.com

NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com

KANDLA WAREHOUSE – kandla@rolexmetals.com

MUMBAI WAREHOUSE – mumbai@rolexmetals.com

STOCKYARD – stockyard@rolexmetals.com

SERVICE – service@rolexmetals.com

SUPPORT – support@rolexmetals.com

RECRUITMENT – career@rolexmetals.com

WEBMASTER – webmaster@rolexmetals.com

CUSTOMER CARE – customercare@rolexmetals.com