Aerospace Approved Materials, Aircraft Quality Materials

Aerospace Approved Materials, Aircraft Quality Materials

Aerospace Approved Material, Aircraft Quality Material

Document Number Title Document Revision Customer
2GSA00003 MACHINED PART DESIGN AND MANUFACTURING B BAE
BAE/AG/QC/SC1 P BAE SYESTEMS AIRCRAFT BUSINESS UNITS QUALITY MANAGEMENT REQU 7 BAE
BAE/AG/QC/SC1 P SC1 PARTS 1-7 APPENDIX 1 DATED 10-2009 APPENDIX 1 BAE
BAE/AG/QC/SC1 P SC1 PARTS 1-7 APPENDIX 4 ISSUE 2 DATED 10-18-2011 2 APPENDIX 4 BAE
BAES-JSF-DOC-22478-15-LS F-35 DESIGN VISUAL EXAMINATION REQUIREMENTS PROQUIS28753 4** BAE
BAES-JSF-DOC-24373-16-LS F-35 LIGHTNING II PROCESS SPECIFICATIONS REQUIRING BUYER APPROVAL ORIGINAL RELEASE** BAE
BAES-JSF-QMS-141-03-DV SUPPLEMENTARY QUALITY REQUIREMENTS FOR SUPPLIERS TO THE F-35 5 BAE
BAES-JSF-QMS-141-03-DV SUPPLEMENTARY QUALITY REQUIREMENTS FOR SUPPLIERS TO THE F-35 LIGHTNING II PROGRAM 12** BAE
BAES-JSF-QMS-141-03-DV SUPPLEMENTARY QUALITY REQUIREMENTS FOR SUPPLIERS TO THE F-35 LIGHTNING II PROGRAM 14** BAE
BAES-JSF-QMS-2356-06-ST BAES SYSTEMS F35 HOLE CODE STANDARD 11 BAE
BAES-JSF-QMS-3510-07-UG GUIDANCE FOR SUPPLIERS TO THE F-35 LIGHTNING II PROGRAM 3 BAE
BAES-JSF-QMS-3607-07-FM INSPECTION HISTORY CARD F-35 LIGHTING II 4** BAE
BAES-JSF-QMS-4286-10-PC F35 EXTERNAL SUPPLY CHAIN CONCESSION COMPILATION PROCESS (INCLUDING OFF PRODUCT) 5** BAE
BAES-JSF-QMS-886-04-PC DESIGN VISUAL EXAMINATION PROCEDURE FOR F-35 9** BAE
BAES-JSF-REC-12280-RFP PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION PLAN (PHS & T) FOR FIRST TIER
SUPPLIERS
11** BAE
BAL-QS-002 SUPPLIER QUALITY REQUIREMENTS 22 BAE
F35-SQB-2010-00 BAE SYSTEMS F-35 LIGHTNING II PROGRAMME SUPPLIER QUALITY BUL 1 BAE
100-229 PLATE-IDENTIFICATION,ELECTRICAL REPAIR SET NEW BELL HELICOPTER
100-245 PLATE, IDENTIFICATION, AERONAUTICAL EQUIPMENT, IUID, LASER-E F BELL HELICOPTER
110-223 FASTENER, BLIND, PROTRUDING HEAD, HIGH STRENGTH, PULL TYPE, L BELL HELICOPTER
110-225 FASTENER, BLIND, 130 SHEAR HEAD, HIGH STRENGTH, PULL TYPE, P G BELL HELICOPTER
110-229 FASTENER, BLIND, 100 FLUSH HEAD, HIGH STRENGTH, PULL TYPE, P E BELL HELICOPTER
120-229 STANDOFF, POST, LOCKING THREAD, ADHESIVE BOND K BELL HELICOPTER
160-009 SHEET METAL MANUFACTURING PRACTICES P BELL HELICOPTER
20-005 TO 024 BUSHING, FLANGED, PRESS FIT, .093 FLANGE THICKNESS Y BELL HELICOPTER
21-003 TO 024 BUSHING, PRESS FIT AC BELL HELICOPTER
299-099-031 FINISH CODE AC BELL HELICOPTER
299-099-796 RQMTS SPEC: CRITICAL PARTS PROGRAM K BELL HELICOPTER
299-099-797 Controlled Items Program B BELL HELICOPTER
299-099-900 APPROVED SOURCE LIST DH BELL HELICOPTER
299-100-837 TECHNICAL DATA – APPROVED METALLIC MATERIALS W BELL HELICOPTER
299-100-840 FATIGUE CONTROLLED COMPONENTS APPRVED SUPPLIERS AND REQUALIF PSD 6-55 BELL HELICOPTER
299-947-072 FAIRING COMPOUND, AERODYNAMIC, EPOXY AND POLYESTER FILLER K BELL HELICOPTER
299-947-073 EPOXY RESIN THERMOSETTING LIQUID MODIFIED, INTERMEDIATE CURI N BELL HELICOPTER
299-947-074 PREMIXED, PREFROZEN SEALANTS U BELL HELICOPTER
299-947-075 PLASTIC SHEET MATERIAL, LAMINATED, THERMOSETTING F BELL HELICOPTER
299-947-076 DUAL-PURPOSE INTERMEDIATE-CURING (265) AM BELL HELICOPTER
299-947-077 PROCUREMENT SPEC FOR BRUSHES, ADHESIVE PRIMING; FLAT G BELL HELICOPTER
299-947-079 EXPANDABLE UNSUPPORTED FILM ADHESIVE AB BELL HELICOPTER
299-947-090 PLASTIC SHEET, ACRYLIC HEAT RESISTANT AE BELL HELICOPTER
299-947-091 SPECIFICATION FOR DESTRUCTIVE TESTING AND ACCEPT CRITERIA FO T BELL HELICOPTER
299-947-092 PROCUREMENT SPECIFICATION FOR ACRYLIC ADHESIVE, MONOMER AND E BELL HELICOPTER
299-947-097 LOW DENSITY INSERT MATERIAL AA BELL HELICOPTER
299-947-100 PROCUREMENT SPECIFICATION FOR EPOXY ADHESIVE, HEAT RESISTANT PSD 6-55 BELL HELICOPTER
299-947-104 STRUCTURAL ADHESIVE FILMAND PRIMER SYSTEM,HIGH T BELL HELICOPTER
299-947-110 PRESSURE SENSITIVE ADHESIVE TAPE K BELL HELICOPTER
299-947-113 PRESSURE SENSITIVE POLYURETHANE FILM TAPE D BELL HELICOPTER
299-947-121 ADHESIVE FILM AND PRIMER VARIABLE CURE SYSTEM AH BELL HELICOPTER
GKN Design Authority Specification Matrix
Released Date 7/2/2020
Note to Supplier: Please see Quality Requirements #QC1300 regarding the use of this Matrix.
Changes are marked with an single astrisk behind the revision level for change in revision and a double astrisk for new
addition. Contact the Buyer or Supplier Quality Engineer with any questions or concerns.
299-947-125 ADHESIVE, ROOM TEMPERATURE CURING TWO PART EPOXY, HIGH PEEL G BELL HELICOPTER
299-947-128 POLYURETHANE FOAM SYSTEMS(RIGID AND FLEXIBLE) N BELL HELICOPTER
299-947-140 REQMTS SPEC: PRIMARY PARTS PROGRAM G BELL HELICOPTER
299-947-299 TEST METHODS D BELL HELICOPTER
299-947-301 FABRIC WOVEN EPOXY RESIN-IMPREGNATED GLASS FIBER M BELL HELICOPTER
299-947-303 TAPRE UNDIRECT 265 DEG CURE EPOXY G BELL HELICOPTER
299-947-320 ADHESIVE FILM AND PRIMER SYSTEM, INTERMEDIATE CURE TEMPERATU L BELL HELICOPTER
299-947-326 FABRIC, WOVEN, EPOXY RESIN-IMPREGNATED GLASS FIBER (180F WET N BELL HELICOPTER
299-947-333 NONDESRUCTIVE INSPECTION ACCEPTANCE CRITERIA FOR LAMINATE AN V BELL HELICOPTER
299-947-345 TAPE, UNIDIRECTIONAL, 350F-CURE, EPOXYRES G BELL HELICOPTER
299-947-346 FABRIC, WOVEN, 350 CURE, TOUGHENED EPOXY, RESIN-IMPREGNATED J BELL HELICOPTER
299-947-359 ROOM TEMP CURE STRUCTURAL EPOXY ADHESIVE A BELL HELICOPTER
299-947-370 FABRIC, 350F-CURE, INTERMEDIATE-TOUGHENED EPOXY RESIN-IMPREG F BELL HELICOPTER
299-947-377 FILM SURFACE L BELL HELICOPTER
299-947-382 RECERT OF LIMITED SHELF LIFE AND CONTROLL M BELL HELICOPTER
299-947-385 FABRIC, 350 CURE, TOUGHENED EPOSY RESIN-IMPREGNATED GLASS FI F BELL HELICOPTER
299-947-386 CORE MATERIAL, NONMETALLIC HONEYCOMB, PHENOLIC RESIN IMPREGN F BELL HELICOPTER
299-947-392 FABRIC WOVEN 265F-CURE, EPOXY RESIN-IMPREGNATED CARBON FIBER C BELL HELICOPTER
299-947-399 ADHESIVE MATERIALS C BELL HELICOPTER
299-947-478 RQMT SPEC FLIGHT SAFETY PARTS PROGRAM K BELL HELICOPTER
299-947-494 MAR-RESISTANT ROTOR BLADE TOPCOATING B BELL HELICOPTER
299-947-496 TOUCH-UP COATING, ONE-PART BELL HELICOPTER
299-947-530 7050-T7451 Aluminum Alloy Plate B BELL HELICOPTER
299-947-547 ACCEPTANCE CRITERIA AND IN-PROCESS REWORK PROCEDURE FOR ALUM A BELL HELICOPTER
299-947-549 COMPRESSION MOLDING COMPOUND, CARBON FIBER REINFORCED EPOXY A BELL HELICOPTER
299-947-551 CORE MATERIAL, NONMETALLIC HONEYCOMB, LARGE CELL CARBON PREP BELL HELICOPTER
299-947-600 GENERAL REQUIREMENTS B BELL HELICOPTER
299-947-739 DRAWING INTERPRETATION AND GENERAL REQUIREMENTS P BELL HELICOPTER
299-963-001 SPECIMEN, TEST, ADHESIVE BOND CONTROL H BELL HELICOPTER
30-277 COLLAR, WITH INTEGRAL WASHER, STAINLESS STEEL G BELL HELICOPTER
512-947-002 FINISH SPECIFICATION FOR RELENTLESS MODEL 525 A BELL HELICOPTER
90-067 LATCH ASSEMBLY, TRIGGER ACTION, CHANNEL, 10-LB OPERATING FOR J BELL HELICOPTER
901-432-010 AERODYNAMIC SMOOTHNESS REQMTS D BELL HELICOPTER
901-947-002 FINISH SPECIFICATION FOR V 22 AIRCRAFT E BELL HELICOPTER
BAC5744-22 BAC5744 PSD 6-22 PSD6-22 BELL HELICOPTER
BELL PS NUMERIC BELL PROCESS SPECIFICATION NUMERICAL INDEX DY BELL HELICOPTER
BELL PS SUBJECT BELL PROCESS SPECIFICATION SUBJECT INDEX EB BELL HELICOPTER
BPS4001 CHROMIC ACID ANODIZING O BELL HELICOPTER
BPS4007 PASSIVATION P BELL HELICOPTER
BPS4012 ASSEMBLING THERMAL FITS D BELL HELICOPTER
BPS4018 INSTALLATION AND TIGHTENING PROCEDURES FOR THREADED FASTENER U BELL HELICOPTER
BPS4019 RIVETING PROCEDURE FOR STANDARD SOLID AND TUBULAR OVAL HEAD C BELL HELICOPTER
BPS4020 PRESSURE TESTING L BELL HELICOPTER
BPS4036 Installation Procedures for Blind Rivets, Blind Bolts, and Rivnuts G BELL HELICOPTER
BPS4038 INSTALLATION OF HI-SHEAR RIVETS AND HI-LOK/HI-LITE FASTENERS H BELL HELICOPTER
BPS4044 EMBRITTLEMENT AND STRESS RELIEF FOR PLATED AND PICKLED PARTS C BELL HELICOPTER
BPS4050 MARKING AIRCRAFT PARTS AF BELL HELICOPTER
BPS4050 VAR 80:ABF:dss-13-125 A BELL HELICOPTER
BPS4089 FLUORESCENT PENETRANT INSPECTION M BELL HELICOPTER
BPS4102 PACKAGING AND/OR PRESERVATION OF AIRCRAFT PARTS AND ASSEMBLI U BELL HELICOPTER
BPS4135 DIMPLING OF ALUM, MAG, STAIN STEEL AND TITAN B BELL HELICOPTER
BPS4138 CHEMICAL CLEANING OF AIRCRAFT MATERIALS F BELL HELICOPTER
BPS4139 HEAT TREATMENT OF ALUMINUM ALLOYS P BELL HELICOPTER
BPS4140 HEAT TREATMENT OF STEEL G BELL HELICOPTER
BPS4162 INSTALL AND RETENTION OF BEARINGS THROUGH STAKING H BELL HELICOPTER
BPS4163 AIRCRAFT CASTINGS J BELL HELICOPTER
BPS4168 APPLICATION OF ALUMINUM FOIL ID PLATES C BELL HELICOPTER
BPS4182 CHEMICAL FILM TREATMENT G BELL HELICOPTER
BPS4182 VAR 80:ABF:dss-13-122 A BELL HELICOPTER
BPS4212 HEAT TREAT OF TITANIUM ALLOYS C BELL HELICOPTER
BPS4315 RIVETING PROCEDURE, FOR CHOBERT BLIND RIVETS A BELL HELICOPTER
BPS4316 ALUMINUM AND ALUMINUM ALLOY RIVETS PROCESSING, STORAGE AND U D BELL HELICOPTER
BPS4326 VIBRATION AND BARREL FINISHING OF METALS A BELL HELICOPTER
BPS4335 ADHESIVE BONDING OF NAMEPLATES C BELL HELICOPTER
BPS4339 HANDLING, CUTTING, MACHINING, CRUSHING, AND FORMING OF HONEY D BELL HELICOPTER
BPS4352 SURFACE PREP OF MATERIALS FOR ADHESIVE BONDING L BELL HELICOPTER
BPS4352 SURFACE PREP OF MATERIALS FOR ADHESIVE BONDING K VAR 1 BELL HELICOPTER
BPS4367 ZINC CHROMATE PRIMER, APPLICATION OF B EO BELL HELICOPTER
BPS4383 APPLICATION OF LOW DENSITY INSERT MATERIAL IN CONJUNCTION WI F BELL HELICOPTER
BPS4389 CHEMICAL MILLING C EO BELL HELICOPTER
BPS4403 SECONDARY ADHESIVE BONDING USING EPOXY BASED ADHESIVES J BELL HELICOPTER
BPS4407 PREPARATION AND APPLICATION OF SEALANTS J BELL HELICOPTER
BPS4407 BPS4407 Sealant Cure Time A BELL HELICOPTER
BPS4409 SHOT PEENING OF STEEL, ALUMINUM AND TITANIUM C BELL HELICOPTER
BPS4416 CALIBRATION AND CERTIFICATION OF THERMAL PROCESSING EQUIPMEN D BELL HELICOPTER
BPS4424 NONDESTRUCTIVE INSPECTION OF BONDED AND COMPOSITE COMPONENTS G BELL HELICOPTER
BPS4427 APPLICATION OF EPOXY ENAMEL B BELL HELICOPTER
BPS4428 CORROSION PROTECTIVE COATING, PAINT TYPE A BELL HELICOPTER
BPS4437 FABRICATION OF STRUCTURAL COMPONENTS USING DUAL PURPOSE, INT E BELL HELICOPTER
BPS4446 COMPOSITE BONDING C BELL HELICOPTER
BPS4449 STRUCTURAL ADHESIVE BONDING SYSTEM, HIGH TEMPERATURE RESISTA D BELL HELICOPTER
BPS4451 APPLICATION OF EPOXY PRIMER H BELL HELICOPTER
BPS4451 BPS4451 VARIATION REQUEST 80-ABF-DSS-14-123 BELL HELICOPTER
BPS4453 CONDUCTIVITY INSPECTION OF WROUGHT ALUMINUM ALLOYS TO DETERM C BELL HELICOPTER
BPS4456 ANTI-FRETTING TREATMENT FOR TITANIUM B BELL HELICOPTER
BPS4458 STRUCTURAL ADHESIVE BONDING USING INTERMEDIATE – HIGH PERFO F BELL HELICOPTER
BPS4464 APPLICATION OF POLYURETHANE COATING C BELL HELICOPTER
BPS4467 HARDNESS TESTING AND REQUIREMENTS OF METALS C BELL HELICOPTER
BPS4469 COMPRESSION MOLDING OF PLASTIC PARTS A BELL HELICOPTER
BPS4472 INSTALLATION OF BLIND, HIGH STRENGTH STEEL FASTENER, PULL TY EO BELL HELICOPTER
BPS4478 FABRICATION OF ROOM TEMPERATURE CURING LAMINATED COMPONENTS A BELL HELICOPTER
BPS4492 FLUOROSCOPIC RADIOGRAPHIC INSPECTION B BELL HELICOPTER
BPS4496 ION VAPOR DEPOSITION OF ALUMINUM BASIC BELL HELICOPTER
BPS4497 APPLICATION OF BODY AND PINHOLE FILLERS C BELL HELICOPTER
BPS4511 PROCESSING SPECIFICATION FOR 350F CURE LAMINATE COMPOSITE STRUCTURES E BELL HELICOPTER
BPS4512 PROCESSING SPECIFICATION FOR 250 TO 290 CURE LAMINATE COMPOS D BELL HELICOPTER
BPS4514 MACHINING, DRILLING AND TRIMMING FIBER REINFORCED COMPOSITE C BELL HELICOPTER
BPS4515 INSTALL OF FASTENERS IN COMPOSITE/COMPOSITE AND COMPOSITE/ME F BELL HELICOPTER
BPS4518 PROCESSING RQMTS FOR 350 CURE SANDWICH COMPOSITE STRUCTURES C BELL HELICOPTER
BPS4528 ELECTRICAL BONDING AND GROUNDING OF AIRCRAFT STRUCTURES A BELL HELICOPTER
BPS4533 INSTALLATION OF SHIMS C BELL HELICOPTER
BPS4542 COLD EXPANDING OF FATIGUE CRITICAL HOLES IN METALS B BELL HELICOPTER
BPS4548 HIGH INTERFERENCE FIT BUSHING INSTALLATION UTILIZING COLD WO BASIC BELL HELICOPTER
BPS4555 THIN FILM SURFURIC ACID ANODIZE BASIC BELL HELICOPTER
BPS4555 THIN FILM SURFURIC ACID ANODIZE VAR 80-ABF-DSS-13-132 BELL HELICOPTER
BPS4555 THIN FILM SURFURIC ACID ANODIZE VAR 80-ABF-DSS-14-206 BELL HELICOPTER
BPS4558 INSTALLATION OF NUT PLATES UTILIZING COLD EXPANSION A BELL HELICOPTER
BPS4569 DRILLING OFHOLES IN METALLIC MATERIALS BASIC BELL HELICOPTER
BPS4570 INSTALL OF ADHESIVE BONDED FASTENERS ON COMPOSITE ANDMETALLI B BELL HELICOPTER
BPS4570 Bell Process Specifications VARIATION REQUESTS A BELL HELICOPTER
BPS4589 PROCESSING OF SANDWICH STRUCTURES USING LARGE CELL CARBON PR A BELL HELICOPTER
BPS4589 PROCESSING OF SANDWICH STRUCTURES USING LARGE CELL CARBON PR VAR 1 BELL HELICOPTER
BPS4592 IUID MARKING AIRCRAFT PARTS B BELL HELICOPTER
BPS5000 DEFINITIONS AND GENERAL LAYUP REQUIREMENTS FOR COMPOSITE MATERIALS BASIC BELL HELICOPTER
MATERIAL BULLET MATERIAL BULLITNS SUBJECT INDEX DM BELL HELICOPTER
MATERIAL BULLETINS Material Bulletins Subject Index DP BELL HELICOPTER
Materials Bulletin 1310E Materials Bulletin 1310E Tape, Flatback, High Adhesion
A BELL HELICOPTER
Materials Bulletin 2009 Materials Bulletin Pen for Interim Marking
A BELL HELICOPTER
MB1001 ZINC CHROMATE PRIMER
V BELL HELICOPTER
MB1008 ALUMINUM DEOXIDIZER
K BELL HELICOPTER
MB1043 TAPE FOR PACKAGING AND SEALING
E BELL HELICOPTER
MB1045 EPOXY ENAMEL AA BELL HELICOPTER
MB1047 EPOXY PRIME
L BELL HELICOPTER
MB1054 TOLUENE
E BELL HELICOPTER
MB1064 METHYL-ETHYL-KETONE
D BELL HELICOPTER
MB1077 TAPE, MASKING, FOR ACRYLIC PLASTIC
G BELL HELICOPTER
MB1094 SULFURIC ACID, TECHNICAL
E BELL HELICOPTER
MB1095 SODIUM DICHROMATE, TECHNICAL
C BELL HELICOPTER
MB1106 DRY BLASTING ABRASIVE
F BELL HELICOPTER
MB1114 FLEXIBLE BARRIER MATERIAL, HEAT SEALABLE,
D BELL HELICOPTER
MB1115 BARRIER MATERIAL
E BELL HELICOPTER
MB1135 ALCOHOL, ETHYL, SPECIALLY DENATURED
B BELL HELICOPTER
MB1142 ALCOHOL, METHYL
D BELL HELICOPTER
MB1159 INK METAL MARKING
P BELL HELICOPTER
MB1171 RUBBER, HEAT RESISTING, BONDING BLANKET
G BELL HELICOPTER
MB1182 LOW DENSITY INSERT MATERIAL AF BELL HELICOPTER
MB1191 PAPER, KRAFT, WRAPPING
A BELL HELICOPTER
MB1192 GLOVE, PALLBEARER
M BELL HELICOPTER
MB1194 FIBERGLASS FABRIC AND ROPE
K BELL HELICOPTER
MB1195 CLEANING COMPOUND
U BELL HELICOPTER
MB1204 BRUSH – ADHESIVE PRIMING
E BELL HELICOPTER
MB1207 SEALING COMPOUND-VACUUM BAG, EXTRUDED
V BELL HELICOPTER
MB1210 ROLLER BRUSH-SLEEVE TYPE-ADHESIVE PRIMING BELL HELICOPTER
MB1224 RELEASE AGENT FOR BONDING MOLDS AND FIXTURES
K BELL HELICOPTER
MB1247 INK, METAL MARKING, TEMPORARY, NON-PERMANENT
C BELL HELICOPTER
MB1249 CHEESECLOTH, BLEACHED
G BELL HELICOPTER
MB1250 TACK RAG
J BELL HELICOPTER
MB1259 HIGH TEMPERATURE PARTING FILM
D BELL HELICOPTER
MB1260 TAPE, MASKING, FOR PAINT SHOP USE
V BELL HELICOPTER
MB1261 MASKING TAPE- HIGH TEMP METAL BOND
K BELL HELICOPTER
MB1272 CHEMICAL FILM MATERIAL FOR ALUMINUM
W BELL HELICOPTER
MB1279 ACETONE
E BELL HELICOPTER
MB1281 ABRASIVE PADS-NYLON WEB
D BELL HELICOPTER
MB1282 MAGNESIUM CLEANER, ALKALINE
A BELL HELICOPTER
MB1291 ALCOHOL, ISOPROPYL (WIPE SOLVENT)
D BELL HELICOPTER
MB1306 LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY
B BELL HELICOPTER
MB1310 TAPE, FLATBLACK, HIGH ADHESION
E BELL HELICOPTER
MB1312 FILM – NYLON VACUUM BAG
K BELL HELICOPTER
MB1315 PLASTIC MATERIAL, LAMINATED THERMOSETTING
D BELL HELICOPTER
MB1325 MOLDING COMPOUND, COTTON CORD REINFORCED
A BELL HELICOPTER
MB1361 PEEL PLY FABRIC – SYNTHETIC – NONBONDING
T BELL HELICOPTER
MB1373 ABRASIVE COATED CLOTH AND PAPER
K BELL HELICOPTER
MB1377 GLOVE, FOR USE WITH AGGRESSIVE TACK RESINS
M BELL HELICOPTER
MB1391 TEFLON COATED FIBERGLASS RELEASE, FABRIC,
F BELL HELICOPTER
MB1400 RELEASE FILM, PERFORATED (HALOHYDROCARBON)
D BELL HELICOPTER
MB1409 PRIMER, EPOXY, CHEMICAL AND SOLVENT RESISTANT AN BELL HELICOPTER
MB1412 TEFLON TAPE
D BELL HELICOPTER
MB1423 FIBERGLASS FABRIC, DRY-181 STYLE WEAVE
D BELL HELICOPTER
MB1440 LUBRICATING OIL-AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
J BELL HELICOPTER
MB1461 ADHESIVE FILM, STRUCTURAL
K BELL HELICOPTER
MB1462 ADHESIVE PRIMER
P BELL HELICOPTER
MB1465 TAPE, PRESSURE SENSITIVE ADHESIVE
H BELL HELICOPTER
MB1466 TAPE, PRESSURE SENSITIVE POLYURETHANE FILM
C BELL HELICOPTER
MB1527 CLEANER, EMULSION
B BELL HELICOPTER
MB1534 POLYESTER BREATHER FABRIC – 10 OZ G BELL HELICOPTER
MB1547 INK, INSPECTION D BELL HELICOPTER
MB1568 COATING POLYURETHANE, HIGH SOLIDS (MIL-PRF-85285) T BELL HELICOPTER
MB1576 LIQUID ADHESIVE WITH 35 % ADHESIVE SOLIDS B BELL HELICOPTER
MB1588 RELEASE AGENTS FOR MOLDS AND FIXTURES L BELL HELICOPTER
MB1615 LACQUER PUTTY FOR PAINT SHOP USE C BELL HELICOPTER
MB1630 PINHOLE FILLER FOR COMPOSITE MATERIALS F BELL HELICOPTER
MB1644 WIPING CLOTH, CHESECLOTH SUBSTITUTE B BELL HELICOPTER
MB1658 SEALING COMPOUND, CORROSION INHIBITED R BELL HELICOPTER
MB1669 TEFLON COATED FABRIC TAPE C BELL HELICOPTER
MB1671 IDENTIFICATION AND MARKING FOR COMPOSITE MATERIALS L BELL HELICOPTER
MB1676 GLOVES, DISPOSABLE K BELL HELICOPTER
MB1679 FLUOROPOLYMER RESIN PARTING FILM J BELL HELICOPTER
MB1693 SILICONE RUBBER DAMMING TAPE B BELL HELICOPTER
MB1697 RELEASE AGENTS-WATERBASE C BELL HELICOPTER
MB1702 NON-CHROMATED LIQUID DEOXIDIZERS C BELL HELICOPTER
MB1708 RUBBER CEMENT BELL HELICOPTER
MB1727 ABRASIVE BRUSHES FOR ELECTRICAL BONDING AND GROUNDING A BELL HELICOPTER
MB1728 CHEMICAL FILM FOR ELECTRICAL BONDING AND GROUNDING ALUMINUM H BELL HELICOPTER
MB1731 FLUOROPOLYMER RESIN PARTING FILM H BELL HELICOPTER
MB1733 SHIMMING COMPOUND, FILLED RESIN F BELL HELICOPTER
MB1745 CARBON FABRIC, DRY-PLAIN WEAVE F BELL HELICOPTER
MB1751 SOLVENT BLEND-NON PHOTO REACTIVE B BELL HELICOPTER
MB1764 POLYESTER BREATHER FABRIC-HEAVY DUTY 10 OZ A BELL HELICOPTER
MB1771 SEALANT, LOW TEMPERATURE CURE F BELL HELICOPTER
MB1772 SEALANT, LIGHT WEIGHT E BELL HELICOPTER
MB1794 EPOXY, DEVCON 5-MINUTE BELL HELICOPTER
MB1800 SEALING COMPOUND, CORROSION INHIBITING, PREMIXED AND PREFROZ D BELL HELICOPTER
MB1810 PRIMER, POLYAMIDE EPOXY, TOUCHUP KIT/PEN T BELL HELICOPTER
MB1811 TEFLON TAPE; SKIVED WITH SILICONE ADHESIVE BELL HELICOPTER
MB1812 TEFLON TAPE – SKIVED WITH NON-SILICONE ADHESIVE BELL HELICOPTER
MB1813 TEFLON TAPE-ESTRUDED WITH SILICONE ADHESIVE BELL HELICOPTER
MB1814 TEFLON TAPE, EXTRUDED WITH NON-SILICONE ADHESIVE BELL HELICOPTER
MB1827 WIPE SOLVENT, LOW VAPOR PRESSURE B BELL HELICOPTER
MB1828 SEALANT, ELECTRICALLY CONDUCTIVE B BELL HELICOPTER
MB1842 ABRASIVE WHEEL BELL HELICOPTER
MB1845 ULTRASONIC ATTENUATION TAB MATERIAL A BELL HELICOPTER
MB1870 ADHESION PROMOTER FOR POLYSULFIDE SEALANTS A BELL HELICOPTER
MB1882 MOISTURE RESISTANT WRAPPING MATERIAL BELL HELICOPTER
MB1942 FEATHER FILL POLYESTER PRIMER SURFACER A BELL HELICOPTER
MB1960 PRESATURATED WIPES AND CANISTERS A BELL HELICOPTER
MB1977 WATER-BASED MOLD TOOL CLEANER BELL HELICOPTER
MB1978 WATER-BASED MOLD/TOOL SURFACE SEALER A BELL HELICOPTER
MB2008 INK, INKJET MARKING BELL HELICOPTER
PD-M-125-08 INSPECTION STATUS STAMPS B BELL HELICOPTER
QPS101 APPROVED PROCESSING LIST 12/1/2016 BELL HELICOPTER
QPS106 BELL HELICOPTER TEXTRON INC. ACCREDITED SUPPLIER INSPECTION ORG BELL HELICOPTER
QPS108 BELL DESIGNED ELECTRICAL PRODUCT QUALITY REQUI 6 BELL HELICOPTER
QPS109 ANTI-FRICTION BEARINGS PRODUCT QUALITY REQUIRE 6 BELL HELICOPTER
QPS111 SUBCONTRACT TOOLING 2 BELL HELICOPTER
SQRM-001 SUPPLIER QUALITY REQUIREMENTS MANUAL D BELL HELICOPTER
STANDARDS INDEX STANDARDS INDEX LIST NEW BELL HELICOPTER
787N5-2017 787 Demand Visibility on the Supplier Portal E BOEING COMM
787N5-4168 787 Program Guidelines for Approving Shipment of Partner-Managed Inventory to Subtier Supplier E BOEING COMM
787N5-4554 787 Master Schedule Communication Process C BOEING COMM
BAC001PREF PREFACE V BOEING COMM
BAC5000 SEALING, GENERAL AU BOEING COMM
BAC5000 SEALING, GENERAL PSD6-231 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-239 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-269 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-271 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-273 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-276 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-294 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-295 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-296 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-313 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-315 BOEING COMM
BAC5000 SEALING, GENERAL PSD6-372 BOEING COMM
BAC5004 INSTALLATION OF PERMANENT FASTENERS
N BOEING COMM
BAC5004 PROCESS SPECIFICATION DEPARTURE TO BAC5004 6-135 BOEING COMM
BAC5004-1 SOLID RIVET INSTALLATION
T BOEING COMM
BAC5004-1 SOLID RIVET INSTALLATION PSD6-68 BOEING COMM
BAC-5004-1 PROCESS SPECIFICATION DEPARTURE BAC-5004-1 6-80 BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION AJ BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION PSD6-82 BOEING COMM
BAC5004-2 PERMANENT STRAIGHT SHANK FASTENER INSTALLATION PSD6-152 BOEING COMM
BAC5004-2 PERMANENT STRAIGHT SHANK FASTENER INSTALLATION PSD6-157 BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION PSD6-160 BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION PSD6-161 BOEING COMM
BAC5004-2 PERMANENT STRAIGHT SHANK FASTENER INSTALLATION PSD6-162 BOEING COMM
BAC5004-2 PERMANENT STRAIGHT SHANK FASTENER INSTALLATION PSD6-163 BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION PSD6-164 BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION PSD6-165 BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION PSD6-166 BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION PSD6-169 BOEING COMM
BAC5004-2 PERMANANT STRAIGHT SHANK FASTENER INSTALLATION PSD6-171 BOEING COMM
BAC5004-2 PERMANENT STRAIGHT SHANK FASTENER INSTALLATION PSD6-173 BOEING COMM
BAC5004-2 PERMANENT STRAIGHT SHANK FASTENER INSTALLATION PSD6-174 BOEING COMM
BAC5004-3 BLIND FASTENER INSTALLATION
J BOEING COMM
BAC5004-4 ONE SIDED INSTALL BOLTS-INSTALL & INSPECTION
A BOEING COMM
BAC5004-4 ONE SIDED INSTALL BOLTS-INSTALL & INSPECTION PSD6-1 BOEING COMM
BAC5004-4 ONE SIDED INSTALLATION BOLTS – INSTALLATION AND INSPECTION PSD6-2 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS
U BOEING COMM
BAC5008 Process Specification Departure BAC508 PSD6-139 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-136 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-141 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-142 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-143 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-145 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-146 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-135 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-144 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-147 BOEING COMM
BAC5008 APPLICATION OF LUBRICANTS PSD6-148 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION AE BOEING COMM
BAC5009 Process Specification Departure PSD6-174 BOEING COMM
BAC5009 Process Specification Departure PSD6-176 BOEING COMM
BAC5009 Process Specification Departure PSD6-179 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD6-181 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD6-183 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD6-184 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD6-186 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD9-62 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD9-61 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD9-79 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD6-154 BOEING COMM
BAC5009 BOLT AND NUT INSTALLATION PSD6-182 BOEING COMM
BAC5010 APPLICATION OF ADHESIVES W BOEING COMM
BAC5010 APPLICATION OF ADHESIVES PSD6-168 BOEING COMM
BAC5010 APPLICATION OF ADHESIVES PSD6-173 BOEING COMM
BAC5010 APPLICATION OF ADHESIVES PSD6-177 BOEING COMM
BAC5010 APPLICATION OF ADHESIVES PSD6-178 BOEING COMM
BAC5010 APPLICATION OF ADHESIVES PSD6-175 BOEING COMM
BAC5034 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES P BOEING COMM
BAC5034-1 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH
COATINGS J BOEING COMM
BAC5034-2 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH
NONADHERENT FILM AND SHEET COVERINGS F BOEING COMM
BAC5034-2 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH
NONADHERENT FILM AND SHEET COVERINGS
PSD6-41 BOEING COMM
BAC5034-2 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH
NONADHERENT FILM AND SHEET COVERINGS
PSD6-43 BOEING COMM
BAC5034-2 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH
NONADHERENT FILM AND SHEET COVERINGS
PSD6-40 BOEING COMM
BAC5034-2 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH
NONADHERENT FILM AND SHEET COVERINGS
PSD6-42 BOEING COMM
BAC5034-3 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASS D BOEING COMM
BAC5034-4 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASS L BOEING COMM
BAC5034-4 PROCESS SPECIFICATION DEPARTURE TEMPORARY PROTECTION OF PRODUCTION MATERIALS,
PARTS, AND ASSEMBLIES WITH PRESSURE-SENSITIVE TAPE
PSD6-70 BOEING COMM
BAC5034-4 Process Specification Departure Temporary Protection of Production Materials, Parts, and Assemblies
with Pressure-Sensitive Tape
PSD6-72 BOEING COMM
BAC5034-4 Process Specification Departure Temporary Protection of Production Materials, Parts, and Assemblies
with Pressure Sensitive Tape
PSD6-71 BOEING COMM
BAC5034-4 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH
PRESSURE-SENSITIVE TAPE
PSD6-73 BOEING COMM
BAC5034-4 TEMPORARY PROTECTION OF PRODUCTION MATERIALS, PARTS, AND ASSEMBLIES WITH
PRESSURE-SENSITIVE TAPE
PSD6-67 BOEING COMM
BAC5114 ENHANCED PROCESS CONTROL FOR CNC MACHINING QPL Rev C BOEING COMM
BAC5114 ENHANCED PROCESS CONTROL FOR CNC MACHINING C BOEING COMM
BAC5300 FORMING, STRAIGHTING, AND FITTING METAL PARTS N BOEING COMM
BAC5300 GENERAL SEALING PSD6-311 BOEING COMM
BAC5300-1 SURFACE AND EDGE INTEGRITY OF METAL PARTS K BOEING COMM
BAC5300-2 METAL PART FORMING, STRAIGHTENING AND FITTING J BOEING COMM
BAC5300-2 METAL PART FORMING, STRAIGHTENING AND FITTING PSD6-1 BOEING COMM
BAC5300-2 METAL PART FORMING, STRAIGHTENING AND FITTING PSD6-2 BOEING COMM
BAC5306 MARKING OF PANELS AND DIRECT SILKSCREENING J BOEING COMM
BAC5306 MARKING OF PANELS AND DIRECT SILKSCREENING PSD6-29 BOEING COMM
BAC5307 PART MARKING PSD6-298 BOEING COMM
BAC5307 PART MARKING PSD6-289 BOEING COMM
BAC5307 PART MARKING PSD6-295 BOEING COMM
BAC5307 PART MARKING PSD6-294 BOEING COMM
BAC5307 PART MARKING PSD6-296 BOEING COMM
BAC5307 PART MARKING PSD6-293 BOEING COMM
BAC5307 PART MARKING PSD6-288 BOEING COMM
BAC5307 PART MARKING PSD6-303 BOEING COMM
BAC5307 PART MARKING PSD6-304 BOEING COMM
BAC5307 PART MARKING PSD6-308 BOEING COMM
BAC5307 PART MARKING PSD6-315 BOEING COMM
BAC5307 PART MARKING PSD6-316 BOEING COMM
BAC5307 PART MARKING Y BOEING COMM
BAC5325 APPLICATION OF NONCHROMATED PRIMER ON COMPOSITE, PLASTIC, TITANIUM AND CRES
SURFACES
N BOEING COMM
BAC5325 APPLICATION OF NONCHROMATED PRIMER ON COMPOSITE, PLASTIC, TITANIUM AND CRES
SURFACES
PSD6-27 BOEING COMM
BAC5325 APPLICATION OF NONCHROMATED PRIMER ON COMPOSITE, PLASTIC, TITANIUM AND CRES
SURFACES
PSD6-28 BOEING COMM
BAC5338 ACID ETCH AND ELECTROCHEMICAL ETCH MARKING H BOEING COMM
BAC5408 VAPOR DEGREASING M BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-39 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-46 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-51 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-54 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-56 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-57 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-58 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-62 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-61 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-72 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-73 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-75 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-76 BOEING COMM
BAC5408 VAPOR DEGREASING PSD6-77 BOEING COMM
BAC5423 PENETRANT METHODS OF INSPECTION W BOEING COMM
BAC5423 PENETRANT METHODS OF INSPECTION PSD6-155 BOEING COMM
BAC5423 PENETRANT METHODS OF INSPECTION PSD6-156 BOEING COMM
BAC5423 PENETRANT METHODS OF INSPECTION PSD6-158 BOEING COMM
BAC5423 PENETRANT METHODS OF INSPECTION PSD6-159 BOEING COMM
BAC5435 BEARING INSTALLATION AND RETENTION PSD6-50 BOEING COMM
BAC5435 BEARING INSTALLATION AND RETENTION AA BOEING COMM
BAC5435 BEARING INSTALLATION AND RETENTION PSD6-62 BOEING COMM
BAC5436 ETCH INSPECTION OF GROUND OR MACHINED STEEL PARTS G BOEING COMM
BAC5436 ETCH INSPECTION OF GROUND OR MACHINED STEEL PARTS PSD6-61 BOEING COMM
BAC5440 HOLE PREPARATION MACHINING AND GRINDING STEELS L BOEING COMM
BAC5492 MACHINING, CUTTING, AND SURFACE INTEGRITY OF TITANIUM N BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES AP BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES PSD6-205 BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES PSD6-208 BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES PSD9-18 BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES PSD6-233 BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES PSD6-234 BOEING COMM
BAC5514
PROCESS SPECIFICATION DEPARTURE COMMAN BONDING REQUIREMENTS FOR STRUCTURAL
ADHESIVES PSD6-235 BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES PSD6-237 BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES PSD6-324 BOEING COMM
BAC5514 COMMON BONDING REQUIREMENTS FOR STRUCTURAL ADHESIVES PSD6-240 BOEING COMM
BAC5514-589 APPLICATION OF CORROSION INHIBITING ADHESIVES Y BOEING COMM
BAC5555 PHOSPHORIC ACID ANODIZING OF ALUMINUM FOR STRUCTURAL BONDING U BOEING COMM
BAC5613 HEAT TREAT OF TITANIUM AND TITANIUM ALLOYS V BOEING COMM
BAC5613 HEAT TREAT OF TITANIUM AND TITANIUM ALLOYS PSD6-55 BOEING COMM
BAC5613 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS PSD6-57 BOEING COMM
BAC5613 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS 0 QPL Rev V BOEING COMM
BAC5617 HEAT TREATMENT OF ALLOY STEELS W BOEING COMM
BAC5617 HEAT TREATMENT OF ALLOY STEELS PSD6-87 BOEING COMM
BAC5621 TEMPERATURE CONTROL FOR PROCESSING OF MATERIALS L BOEING COMM
BAC5632 BORIC ACID – SULFURIC ACID ANODIZING D BOEING COMM
BAC5632 BORIC ACID – SULFURIC ACID ANODIZING PSD6-60 BOEING COMM
BAC5632 BORIC ACID – SULFURIC ACID ANODIZING PSD6-72 BOEING COMM
BAC5632 BORIC ACID – SULFURIC ACID ANODIZING PSD6-62 BOEING COMM
BAC5632 BORIC ACID – SULFURIC ACID ANODIZING PSD6-64 BOEING COMM
BAC5632 BORIC ACID SULFURIC ACID ANODIZING PSD 6-55 BOEING COMM
BAC5632 BORIC ACID – SULFURIC ACID ANODIZING PSD6-81 BOEING COMM
BAC5632 BORIC ACID – SULFURIC ACID ANODIZING PSD6-82 BOEING COMM
BAC5632 BORIC ACID – SULFURIC ACID ANODIZING PSD6-83 BOEING COMM
BAC5650 HARDNESS TESTING E BOEING COMM
BAC5650 HARDNESS TESTING PSD6-5 BOEING COMM
BAC5650 HARDNESS TESTING PSD6-4 BOEING COMM
BAC5650 HARDNESS TESTING PSD6-8 BOEING COMM
BAC5652 INSPECTION OF CASTINGS B BOEING COMM
BAC5665 APPLICATION OF SOL-GEL CONVERSION COATINGS ON CORROSION RESISTANT ALLOYS FOR
PAINTING
D BOEING COMM
BAC5666 FUSION WELDING OF GIRTH JOINTS IN 5080 PSI (35 MPA) SYSTEMS ORG BOEING COMM
BAC5666 FUSION WELDING OF GIRTH JOINTS IN 5080 PSI (35 MPA) SYSTEMS PSD6-2 BOEING COMM
BAC5666 FUSION WELDING OF GIRTH JOINTS IN 5080 PSI (35 MPA) SYSTEMS QPL REV E BOEING COMM
BAC5667 APPLICATION OF SOL-GEL COATINGS FOR ADHESIVES BONDING OF TIT C BOEING COMM
BAC5667 APPLICATION OF SOL-GEL COATINGS FOR ADHESIVES BONDING OF TIT PSD6-1 BOEING COMM
BAC5667 APPLICATION OF SOL-GEL COATING FOR ADHESIVE BONDING OF TITANIUM AND TITANIUM ALLOYS PSD6-5 BOEING COMM
BAC5667 APPLICATION OF SOL-GEL COATING FOR ADHESIVE BONDING OF TITANIUM AND TITANIUM ALLOYS PSD6-6 BOEING COMM
BAC5703 CRITERIA FOR LIMITED CONTAMINATION AREAS K BOEING COMM
BAC5719 CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOY AA BOEING COMM
BAC5719 CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOY PSD6-149 BOEING COMM
BAC5719 CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOY PSD6-150 BOEING COMM
BAC5719 CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOY PSD6-144 BOEING COMM
BAC5719 CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS PSD6-154 BOEING COMM
BAC5719 CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS PSD6-156 BOEING COMM
BAC5719 CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS PSD6-157 BOEING COMM
BAC5725 STRIPPING ORGANIC MATERIALS H BOEING COMM
BAC5725 STRIPPING ORGANIC MATERIALS PSD9-19 BOEING COMM
BAC5725 STRIPPING ORGANIC MATERIALS PSD6-81 BOEING COMM
BAC5730 SHOT PEENING T BOEING COMM
BAC5730 SHOT PEENING PSD6-112 BOEING COMM
BAC5730-1 SHOT PEEN FORMING D BOEING COMM
BAC5730-2 SHOT PEENING-SELF CONTAINED D BOEING COMM
BAC5730-2 SHOT PEENING – SELF CONTAINED PSD6-8 BOEING COMM
BAC5736 APPLICATION OF CHEMICAL AND SOLVENT RESISTANT FINISHES AA BOEING COMM
BAC5736 APPLICATION OF CHEMICAL AND SOLVENT RESISTANT FINISHES PSD6-209 BOEING COMM
BAC5736 APPLICATION OF CHEMICAL AND SOLVENT RESISTANT FINISHES PSD6-208 BOEING COMM
BAC5744 MANUAL CLEANING (COLD ALKALINK, SOLVENT FOAM CLEANERS) H BOEING COMM
BAC5748 ABRASIVE CLEANING, DEBURRING, AND FINISHING U BOEING COMM
BAC5748 ABRASIVE CLEANING, DEBURRING, AND FINISHING PSDS 6-107 BOEING COMM
BAC5748 ABRASIVE CLEANING, DEBURRING, AND FINISHING PSDS 6-106 BOEING COMM
BAC5748 ABRASIVE CLEANING, DEBURRING, AND FINISHING PSD6-108 BOEING COMM
BAC5748 ABRASIVE CLEANING, DEBURRING, AND FINISHING PSD6-109 BOEING COMM
BAC5748 ABRASIVE CLEANING, DEBURRING, AND FINISHING PSD6-110 BOEING COMM
BAC5749 ALKALINE CLEANING Y BOEING COMM
BAC5750 SOLVENT CLEANING R BOEING COMM
BAC5750 SOLVENT CLEANING PSD 6-109 BOEING COMM
BAC5750 SOLVENT CLEANING PSD6-113 BOEING COMM
BAC5750 SOLVENT CLEANING PSD6-110 BOEING COMM
BAC5750 SOLVENT CLEANING PSD6-111 BOEING COMM
BAC5750 SOLVENT CLEANING PSD6-115 BOEING COMM
BAC5751 CLEANING, DESCALING AND SURFACE PREPARATION OF FERROUS ALLOY l BOEING COMM
BAC5751 CLEANING, DESCALING AND SURFACE PREPARATION OF FERROUS ALLOY PSD6-69 BOEING COMM
BAC5753 CLEANING, DESCALING, AND SURFACE PREPARATION OF TITANIUM AND TITANIUM ALLOYS Y BOEING COMM
BAC5756 APPLICATION OF HEAT-TREAT PROTECTIVE COATING K BOEING COMM
BAC5763 EMULSION CLEANING AND AQUEOUS DEGREASING PSD6-47 BOEING COMM
BAC5763 EMULSION CLEANING AND AQUEOUS DEGREASING PSD6-51 BOEING COMM
BAC5763 EMULSION CLEANING AND AQUEOUS DEGREASING PSD6-54 BOEING COMM
BAC5763 EMULSION CLEANING AND AQUEOUS DEGREASING PSD6-77 BOEING COMM
BAC5763 EMULSION CLEANING AND AQUEOUS DEGREASING L BOEING COMM
BAC5763 EMULSION CLEANING AND AQUEOUS DEGREASING PSD6-76 BOEING COMM
BAC5763-72 BAC5763 PSD 6-72 PSD6-72 BOEING COMM
BAC5765 CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PSD6-234 BOEING COMM
BAC5765 CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PSD6-235 BOEING COMM
BAC5765 CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PSD6-238 BOEING COMM
BAC5765 CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PSD6-239 BOEING COMM
BAC5765 CLEANING AND DEOXIDIZING ALUMINUM ALLOYS Y BOEING COMM
BAC5765 CLEANING AND DEOXIDIZING ALUMINUM ALLOYS PSD6-236 BOEING COMM
BAC5771 STRIPPING INORGANIC FINISHES J BOEING COMM
BAC5771 STRIPPING INORGANIC FINISHES PSD6-80 BOEING COMM
BAC5771 STRIPPING INORGANIC FINISHES PSD6-81 BOEING COMM
BAC5771 STRIPPING INORGANIC FINISHES PSD6-82 BOEING COMM
BAC5772-72 BAC5772 PSD6-72 PSD6-72 BOEING COMM
BAC5777 WASHER PRIMER, APPLICATION OF G BOEING COMM
BAC5786 ETCH CLEANING OF ALUMINUM ALLOYS N BOEING COMM
BAC5793 APPLICATION OF CORROSION RESISTANT FINISH FOR INTEGRAL FUEL Y BOEING COMM
BAC5793 APPLICATION OF CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS PSD6-113 BOEING COMM
BAC5793 APPLICATION OF CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS PSD6-117 BOEING COMM
BAC5793 APPLICATION OF CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS PSD6-115 BOEING COMM
BAC5793 APPLICATION OF CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS PSD6-118 BOEING COMM
BAC5793 APPLICATION OF CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS PSDS6-116 BOEING COMM
BAC5807 APPLICATION OF HIGH TEMPERATURE EPOXY PRIMER N BOEING COMM
BAC5807 APPLICATION OF HIGH TEMPERATURE EPOXY PRIMER PSDS8-5 BOEING COMM
BAC5807 APPLICATION OF HIGH TEMPERATURE EPOXY PRIMER PSDS9-31 BOEING COMM
BAC5845 APPLICATION OF POLYURETHANE TOPCOAT V BOEING COMM
BAC5845 APPLICATION OF POLYURETHANE TOPCOAT PSD6-73 BOEING COMM
BAC5861 APPLICATION OF PHOSPHATE-FLUORIDE COATING TO TITANIUM ALLOYS E BOEING COMM
BAC5932 FUSION WELDING OF STEEL F BOEING COMM
BAC5946 TEMPER INSPECTION OF ALUMINUM ALLOYS AA BOEING COMM
BAC5946 TEMPER INSPECTION OF ALUMINUM ALLOYS PSD6-57 BOEING COMM
BAC5946 TEMPER INSPECTION OF ALUMINUM ALLOYS PSD6-59 BOEING COMM
BAC5969 ELECTRICAL DISCHARGE MACHINING PSD6-5 BOEING COMM
BAC5969 ELECTRICAL DISCHARGE MACHINING E BOEING COMM
BACB28AT BUSHING, FLANGED, UNDERSIZE BORE, NOMINAL AND OVERSIZE OD (FOR UNCLAMPED
INSTALLATION) Y BOEING COMM
BACB28T BUSHING, FLANGED, PRESS FIT, STEEL P BOEING COMM
BACC30BH COLLAR,PRELOAD, TENSION, REDUCEDHEX, CRES AC BOEING COMM
BACC30BL COLLAR, PRELOAD, SHEAR, 7075-T73 ALUMINUM ALLOY (FOR LIGHTWE K BOEING COMM
BACC50AP COVER, SEAL, FASTENER, ANTI-SPARKING, MOLDED PLYSULFIDE P BOEING COMM
BACD2023 SERRATIONS, FLAT, PARALLEL B BOEING COMM
BACR10AL RETAINER, FLOATING BARREL NUT M BOEING COMM
BACR15BA RIVET, 100 DEG PRECISION HEAD,CLOSE TOLERANCE SHANK BB BOEING COMM
BACR15BB RIVET,UNIVERSAL HEAD, CLOSE TOLERANCE SHANK BB BOEING COMM
BACS40R SHIM, LAMINATED, ALUMINUM ALLOY, CRES TITANIUM, SURFACE BOND AM BOEING COMM
BDM-1598 MISCELLANEOUS DESIGN A BOEING COMM
BDS-100 DIMENSIONING AND TOLERANCING (ASME Y14.5M-1994) C BOEING COMM
BDS-209 KIT DRAWINGS A BOEING COMM
BDS-500 DRAWING SHEET SIZE AND FORMAT D BOEING COMM
BDS-640 MODEL BASED DEF- MACHINED PARTS B BOEING COMM
BDS-641 MODEL BASED DEFINITION-SHEET METAL PARTS C BOEING COMM
BDS-642 MODEL BASED DEFINITION- CASTINGS AND FORGINGS B BOEING COMM
BMS10-103 BOEING MATERIAL SPECIFICATION QUALIFIED PRODUCTS LIST BMS10-103 D QPL B BOEING COMM
BPS4555 Bell Process Specifications VARIATION REQUESTS A BOEING COMM
BSS7002 STORAGE OF TIME AND TEMPERATURE SENSITIVE (TATS) MATERIALS AE BOEING COMM
BSS7002 STORAGE OF TIME AND TEMPERATURE SENSITIVE (TATS) MATERIALS PSD1-129 BOEING COMM
BSS7025 ESTABLISHING AND MAINTAINING PROCESS CONTROL DOCUMENTS FOR METALLIC MATERIALS ORG BOEING COMM
BSS7039 LIQUID PENETRANT INSPECTION PSD 6-9 BOEING COMM
BSS7039 LIQUID PENETRANT INSPECTION PSD 6-10 BOEING COMM
BSS7123 QUALIFICATION OF AUTOCLAVES AND OVENS FOR METAL BONDING AND CURING COMPOSITE
STRUCTURE
Initial Release BOEING COMM
BSS7123 QUALIFICATION OF AUTOCLAVES AND OVENS FOR METAL BONDING AND CURING COMPOSITE
STRUCTURE
DCNPSO-002023-01 BOEING COMM
BSS7225 ADHESION, TAPE TEST J BOEING COMM
BSS7350 ROCKWELL HARDNESS TESTING PROCEDURES E BOEING COMM
BSS7600 PERSONNEL CERTIFICATION, GENERAL REQUIREMENTS W BOEING COMM
BSS7626 APPLICATION OF CORROSION RESISTANTFUEL TANK COATING, EMPLOYEE CERTIFICATION FOR C BOEING COMM
D012Z026-01 787 PARTNERS/SUPPLIERS: PROCESS RESPONSIBILITIES FOR NONCONF AN* BOEING COMM
D012Z027-01 Demand Visibility on the Supplier Portal C BOEING COMM
D012Z028-01 787 Process for End Item Shipments with Incomplete Statement of Work O BOEING COMM
D016Z004-01 Consuming Partner Supply Chain Processes for Partner-Managed Inventory M BOEING COMM
D016Z004-02 Providing Partner Supply Chain Processes for Partner-Managed Inventory M BOEING COMM
D016Z005-01 Receipt Process for Partner-Managed Inventory N BOEING COMM
D-13709-4 Requirements for Obtaining Materials Review Board Authority by Boeing Suppliers G BOEING COMM
D-13709-5 Material Review Board Requirements for Suppliers With Design Authority D BOEING COMM
D1-8007 USER GUIDE FOR STATISTICAL SAMPLING PLANS H BOEING COMM
D31102-0 MOLD DESIGN DOCUMENT (FOR MOLDING RUBBER PARTS) J BOEING COMM
D31102-1 PLANNING CONSIDERATIONS FOR MOLDING RUBBER PARTS H BOEING COMM
D31102-2 MOLD DESIGN CONSIDERATIONS FOR MOLDING RUBBER PARTS H BOEING COMM
D31102-3 STANDARD LOW PRESSURE INJECTION MOLDS H BOEING COMM
D31102-4 TOOLING DESIGN H BOEING COMM
D31181-0 BOEING ADVANCED COMPOSITES TOOL DESIGN DOCUMENT R BOEING COMM
D32061-00 BOEING TEMPLATE DOCUMENT W BOEING COMM
D32061-01 TOOLING FABRICATION V BOEING COMM
D32061-02 TOOLING FABRICATION V BOEING COMM
D32061-03 TOOLING FABRICATION V BOEING COMM
D32061-04 TOOLING FABRICATION V BOEING COMM
D32061-05 TOOLING FABRICATION V BOEING COMM
D32061-06 TOOLING FABRICATION V BOEING COMM
D32061-07 TOOLING FABRICATION V BOEING COMM
D32061-08 TOOLING FABRICATION V BOEING COMM
D32061-09 DEVELOPED BLANK TEMPLATE V BOEING COMM
D32061-10 TOOLING FABRICATION V BOEING COMM
D32061-11 TOOLING FABRICATION V BOEING COMM
D32061-12 PROFILE TEMPLATE V BOEING COMM
D32061-13 DEVELOPED BLANK TEMPLATE W BOEING COMM
D32061-14 ROUTER DRILL TEMPLATE V BOEING COMM
D32061-15 ROUTER DRILL TEMPLATE V BOEING COMM
D32061-16 APPLY TRIM TEMPLATE W BOEING COMM
D32061-17 PLASTIC APPLY TRIM TEMPLATE V BOEING COMM
D32061-18 BONDING APPLY TRIM TEMPLATE V BOEING COMM
D32061-19 HOLE LOCATING TEMMPLATE V BOEING COMM
D32061-20 JIG DRILL TEMPLATE V BOEING COMM
D32061-21 DIE CONSTRUCTION TEMPLATE V BOEING COMM
D32061-22 SETUP TEMPLATE V BOEING COMM
D32061-23 WALES TYPE HOLDERS V BOEING COMM
D32061-24 TYPICAL SETUP TEMPLATE APPLICATIONS V BOEING COMM
D32061-25 TYPICAL COMBINATION SETUP TEMPLATE V BOEING COMM
D32061-26 SETUP TEMPLATE-STRIP TYPE V BOEING COMM
D32061-27 SUT FOR PIERCING PILOT HOLES IN CURVED STRINGERS USING STRIP V BOEING COMM
D32061-28 STUDWELD SETUP TEMPLATE V BOEING COMM
D32061-29 MASKING SETUP TEMPLATE V BOEING COMM
D32061-30 SETUP TEMPLATE FOR HORIZONTAL STRIPPET V BOEING COMM
D32061-31 SUT- MACHINE RIVETER MARKING TEMPLATE V BOEING COMM
D32061-32 SPRAY TYPE SETUP TEMPLATE V BOEING COMM
D32061-33 WIEDEMANN SETUP TEMPLATE V BOEING COMM
D32061-34 SUT FOR MASS JOGGLED STRINGERS V BOEING COMM
D32061-35 COUNTERSINKING SHEET METAL PARTS W BOEING COMM
D32061-36 EXTERIOR MARKING TEMPLATE V BOEING COMM
D32061-37 MASTER TOOLING TEMPLATE V BOEING COMM
D32061-38 MASTER HOLE LOCATION TEMPLATE-INACTIVE V BOEING COMM
D32061-40 HOLE CHECKING TEMPLATE V BOEING COMM
D32061-44 OPTICAL COMPARATOR TEMPLATE V BOEING COMM
D32061-45 PART NUMBERING TEMPLATE- INACTIVE – IDS-WICHITA ONLY V BOEING COMM
D32061-46 CAM TEMPLATE- INACTIVE V BOEING COMM
D32061-47 PIN ROUTING TEMPLATE- INACTIVE V BOEING COMM
D32061-49 SAMPLE PART TEMPLATE V BOEING COMM
D32061-50 TAP DRILL SIZE FOR STEEL V BOEING COMM
D32061-51 LAYOUT FOR ROUND FLANGED HOLES V BOEING COMM
D32061-52 BACD2010 AND BACD2012 CUTOUTS V BOEING COMM
D32101-0 BOEING PLASTICS TOOLING DOCUMENT AA BOEING COMM
D32101-2 GENERAL PLASTIC TOOLING INFORMATION V BOEING COMM
D32102-0 BOEING TOOLING RESIN AND PLASTIC MATERIALS AJ BOEING COMM
D32102-2 GEL COATS AE BOEING COMM
D32102-3 LAMINATING RESINS AJ BOEING COMM
D33011-0 BOEING TOOL DESIGN DOCUMENT CR BOEING COMM
D33041-0 BOEING TOOL INDENTIFICATION CODES AW BOEING COMM
D33041-7 FIXTURES (3) AW BOEING COMM
D33113-1 ACCOUNTABILITY OF INPLANT OUTPLANT SPECIAL (CONTRACT) TOOLS U BOEING COMM
D33121-0 INDEX TO T CODED JOGGLE TOOLS J BOEING COMM
D33121-1 INDEX TO T CODED JOGGLE TOOLS H BOEING COMM
D33142-14 TOOLING REFERENCE EF BOEING COMM
D33142-14B OPTICAL ALIGNMENT TARGETS EG BOEING COMM
D33181-100 PAINTING OF SPECIAL TOOLS DG* BOEING COMM
D33181-40 TOOL IDENTIFICATION CY BOEING COMM
D33200-0 TOOLING REFERENCE AB BOEING COMM
D33200-1 BOEING SUPPLIER’S TOOLING AR BOEING COMM
D36001-1 BAR CODE STANDARDS M BOEING COMM
D37520-1 SUPPLIERS’ PART PROTECTION GUIDE – INTRODUCTION R BOEING COMM
D37520-1A SUPPLIERS’ PART PROTECT GUIDE – GEN PACKAGING SPECIFICATIONS K BOEING COMM
D37520-1B SUPPLIERS’ PART PROTECTION GUIDE K BOEING COMM
D37520-1C SUPLIERS’ PART PROTECT GUIDE – INTRODUCTION W BOEING COMM
D37520-4 PART PRESERVATION AND PROTECTION STANDARDS M BOEING COMM
D37520-5 MANAGEMENT OF APPROVED FIRE RESISTANT MATERIALS FOR KITS, CA AF BOEING COMM
D451U742-03 LCF Transportation Integration Process D BOEING COMM
D6-1276 CONTROL OF MATERIALS AND PROCESSES FOR DESGINATE PARTS AND COMPONENTS OF
BOEING
U BOEING COMM
D6-5000 SPECIAL COMMERCIAL AIRPLANE COMPANY FINISH CODES BL BOEING COMM
D6-51991 QUALITY ASSURANCE STANDARD FOR DIGITAL PRODUCT DEFINTION AT SUPPLIERS N BOEING COMM
D6-56199
HARDWARE AND SOFTWARE COMPATIBILITY REQUIREMENTS FOR SUPPLIERS USE OF BCA CATIA
NATIVE DATASETS AS AUTHORITY FOR DESIGN, MANUFACTURING AND INSPECTION AI BOEING COMM
D6-81491 USAGE OF CATIA NATIVE, CATIA IGES AND PDM STEP DATASETS F BOEING COMM
D6-81690 THREE-DIMENSIONAL MEASUREMENT SYSTEM PARAMETERS AND GUIDELINES B BOEING COMM
D6-83402 Translations of Model Based Definition D BOEING COMM
D6-83720 DROP SHIP CERTIFICATION OF CONFORMANCE REQUIREMENTS FOR BOEING SUPPLIERS A BOEING COMM
D6-83754 Authoritative Model Based Definition AJ* BOEING COMM
D6-84208 CONTROL AND APPROVAL OF DESIGNATED ELECTROMAGNETIC EFFECTS PROTECTION FEATURES E BOEING COMM
D6-84378 SUPPLIER PRODUCT DATA MANAGEMENT (SPDM) D BOEING COMM
D6-84425 PRODUCT DEFINITION DATA CONVERSION STRATEGY AND BEST PRACTICES FOR BCA LEGACY
PROGRAMS A BOEING COMM
D6-84434 DOCUMENT DISTRIBUTION FOR SUPPLIERS/PARTNERS A BOEING COMM
D6-85622 FOREIGN OBJECT DEBRIS/FOREIGN OBJECT DAMAGE (FOD) PREVENTION REQUIREMENTS FOR
BOEING SUPPLIERS NEW RELEASE BOEING COMM
D6Z00001 787 PROCESSES AND SYSTEMS COMMONALITY MATRIX AH BOEING COMM
10M10 MISC – ELECTRICAL BP BOEING MILITARY
10M10 MISCELLANEOUS – ELECTRICAL BP SUPPLEMENT 1 BOEING MILITARY
10M20 MISCELLANEOUS- MECHANICAL AJ BOEING MILITARY
11D0014 J-SHAPE, EXTRUDED A BOEING MILITARY
11M1085 STRIP, ELASTOMERIC, ONE-SIDED TAPER C BOEING MILITARY
14M912 TUBING, PLASTIC, EXTRUDED, TORSIONALLY CUT L BOEING MILITARY
14M918 PLASTIC TUBING, SPECIAL SHAPED SECTION-EXTRUDED F BOEING MILITARY
14M924 PLASTIC SPECIAL SHAPED SECTION – EXTRUDED NEW BOEING MILITARY
17P9M2007 NONDESTRUCTIVE INSPECTION PROCEDURES U BOEING MILITARY
1D0344 HINGE, EXTRUDED NEW BOEING MILITARY
1D1842 HINGE EXTRUDED NEW BOEING MILITARY
1MA100 ALUMINUM ALLOY ANGLE-EXTRUDED AG BOEING MILITARY
1MA10008 ALUMINUM ALLOY SPECIAL SHAPED SECTION – EXTRUDED A BOEING MILITARY
1MA10021 ALUMINUM ALLOY SPECIAL – SHAPED SECTION – EXTRUDED NEW BOEING MILITARY
1MA10219 ALUMINUM ALLOY SPECIAL SHAPED SECTION – EXTRUDED NEW BOEING MILITARY
1MA10231 ALUMINUM ALLOY SPECIAL SHAPED SECTION – EXTRUDED A BOEING MILITARY
1MA10319 ALUMINUM ALLOY SPECIAL SHAPED SECTION – EXTRUDED NEW BOEING MILITARY
1MA10322 ALUMINUM ALLOY SPECIAL SHAPED SECTION – EXTRUDED NEW BOEING MILITARY
1MA10404 ALUMINUM ALLOY SPECIAL SHAPED SECTION – EXTRUDED NEW BOEING MILITARY
1MA10500 ALUMINUM ALLOY SPECIAL SHAPED SECTION EXTRUDED NEW BOEING MILITARY
1MA10716 ALUMINUM ALLOY SPECIAL SHAPED SEC-EXTRUDED BOEING MILITARY
1MA10717 ALUMINUM ALLOY SPECIAL SHAPED-SECTION-EXTRUDED NEW BOEING MILITARY
1MA10718 ALUMINUM ALLOY SPECIAL SHAPED-SECTION-EXTRUDED NEW BOEING MILITARY
1MA120 ALUMINUM ALLOY ANGLE – BULBED, EXTRUDED AA BOEING MILITARY
1MA160 ALUMINUM ALLOY T-SECTION -EXTRUDED AM BOEING MILITARY
1MA162 ALUMINUM ALLOY T-SECTION – OFFSET, EXTRUDED Y BOEING MILITARY
1MA180 ALUMINUM ALLOY Z-SECTION – EXTRUDED L BOEING MILITARY
1MA240 ALUMINUM ALLOY RECTANGULAR BAR – EXTRUDED E BOEING MILITARY
1MT300 TITANIUM ALLOY ANGLE- EXTRUDED M BOEING MILITARY
1MT360 TITANIUM ALLOY T-SECTION-EXTRUDED AC BOEING MILITARY
1MT363 TITANIUM ALLOY T – SECTION – FLANGED, EXTRUDED H BOEING MILITARY
23M111 PIN- RIVET, THREADED U BOEING MILITARY
27M100 CLEANING AND PACKAGING OF FLUID SYSTEM COMPONENTS T BOEING MILITARY
27M102 FITTINGS TUBE SEPARABLE R BOEING MILITARY
27M110 OXYGEN SYSTEM ON OFF VALVES C BOEING MILITARY
29M105 PANSTOCK INVENTORY CONTROL LABEL, BAR CODED, PREPARATION AND E BOEING MILITARY
30M-A-A-52550 A-A-52550, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-A-A-55487 A-A-55487, BOEING- ST. LOUIS SUPPLEMENT A BOEING MILITARY
30M-A-A-55488 A-A-55488, BOEING – STLOUIS SUPPLEMENT A BOEING MILITARY
30M-A-A-55617 A-A-55617, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-A-A-55618 A-A-55618, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-A-A-55619 A-A-55619, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-A-A-59440/4 A-A-59440/4, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-A-A-59494 A-A-59494, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AN416 AN416, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AN742 AN742, BOEING- ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AN783 SUPPLEMENT FOR AN783, BOEING ST. LOUIS A BOEING MILITARY
30M-AN784 AN784, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AN937 AN937, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AN938 AN938, BOEING ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AN939 AN839 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AN941 AN941, BOEING ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS1031 AS1031, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS1032 AS1032, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS14237 AS14237, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS14238 AS14238, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS15001 AS15002, BOEING ST. LOUIS SUPPLEMENT FOR A SUPPLEMENT BOEING MILITARY
30M-AS1895/7 AS1895/7, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS20253 AS20253, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS25036 AS25036 BOEING-ST. LOUIS SUPPLEMENT FOR B BOEING MILITARY
30M-AS27194 AS27194, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS27641 SUPPLEMENT FOR AS27641, BOEING ST. LOUIS B BOEING MILITARY
30M-AS28778 AS28778, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS28914 AS28914, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS28915 AS28915, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS29512 AS29512, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS29513 AS29513, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS33671 AS33671, BOEING ST. LOUIS SUPP FOR A SUPPLEMENT BOEING MILITARY
30M-AS35769 AS35769, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS3582 SUPPLEMENT FOR AS3582, BOEING ST. LOUIS A BOEING MILITARY
30M-AS4863 AS4863, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS5168 AS5168, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS5172 AS5172, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS5174 AS5174 BOEING-ST. LOUIS SUPPLEMENT FOR D BOEING MILITARY
30M-AS5176 AS5176 BOEING ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-AS5190 AS5190, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS5191 AS5198, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS5192 AS5192, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS5355/3 REV A SUPPLEMENT FOR AS5355/3 A BOEING MILITARY
30M-AS5406 AS5406 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-AS5587 AS5587, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS5986 AS5986, BOEING-ST.LOUIS SUPPLEMENT FOR D SUPPLEMENT BOEING MILITARY
30M-AS627 AS627, BOEING-ST. LOUIS SUPPLEMENT FOR NEW SUPPLEMENT BOEING MILITARY
30M-AS81820/4 AS81820/4, BOEING ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS81935/3 AS81935/3, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS90991 AS90991, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS9105 AS9105, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS9105 AS9105, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS9276 AS9276, BOEING ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS9486 AS9486, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS9490 AS9490, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS9491 AS9491, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS9493 AS9493, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-AS9882 AS9882, BOEING ST. LOUIS SUPPLEMENT FOR NEW SUPPLEMENT BOEING MILITARY
30M-M12883/50 M-M12883/50, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-M25675 M25675, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-M25677/2 MIL-DTL-25677/2, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-M26626 MIL-PRF-26626, BOEING ST. LOUIS SUPP A BOEING MILITARY
30M-M7034/1 M7034/1, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-M7034/2 M7034/2, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-M7034/3 M7034/3, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-M7034/4 M7034/4, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-M81935/3 M81935/3, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-M83413/8 MIL-C-83413/8 BOEING-ST. LOUIS SUPPLEMENT D BOEING MILITARY
30M-M9395/41 M9395/41, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS122076 TH MS122076 THRU MS122115 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS122116 TH MS122116 THRU MS122155, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS122156 TH MS122156 THRU MS122195, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS122196 TH MS122196 THRU MS122235 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS122236 TH MS122236 THRU MS122275 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS124651 TH MS124651 THRU MS124690, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS124731 TH MS124731 THRU 124770, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS124771 TH MS124771 THRU MS124810 BOEING ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS124811 TH MS124811 THRU MS124850, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS20074 SUPPLEMENT FOR MS20074, BOEING, ST. LOUIS A BOEING MILITARY
30M-MS20253 SUPPLEMENT FOR MS20253, BOEING ST. LOUIS A BOEING MILITARY
30M-MS20365 MS20365 BOEING-ST. LOUIS SUPPLEMENT FOR BOEING MILITARY
30M-MS20913 SUPPLEMENT FOR MS20913, BOEING ST. LOUIS BOEING MILITARY
30M-MS21025 MS21025 BOEING-ST. LOUIS SUPPLEMENT FOR BOEING MILITARY
30M-MS21049 MS21049 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-MS21056 MS21056 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-MS21058 MS21058 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-MS21141 SUPPLEMENT FOR MS21141 BOEING ST. LOUIS A BOEING MILITARY
30M-MS21209 MS21209 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-MS24380 MS24380 BOEING ST. LOUIS SUPPLENTMENT FOR A BOEING MILITARY
30M-MS24404 THR MS24404 THRU MS24404, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS24593 MS24593 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS24694 MS24694 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-MS25036 MS25036 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-MS27194 MS27194, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS27576 MS27576 BOEING ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-MS28778 MS28778 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS29512 MS29512 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS3367 MS3367, BOEING ST. LOUIS SUPPLEMENT FOR NEW SUPPLEMENT BOEING MILITARY
30M-MS35489 MS35489, BOEING ST. LOUIS SUPP FOR NEW SUPPLEMENT BOEING MILITARY
30M-MS35649 MS35649 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS35769 MS35769 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-MS51940 MS51940, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NA0049 NA0049 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-NA0114 NA0114, CAGE 80205, BOEING-ST. LOUIS SUPPLEMENT FOR B BOEING MILITARY
30M-NAS1081 NAS1081, BOEING-ST. LOUIS SUPPLEMENT FOR G BOEING MILITARY
30M-NAS1169 NAS1169 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-NAS1198 NAS1198, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1199 NAS1199, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1200 NAS1200, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1217 NAS1217 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-NAS1291 NAS1291 BOEING-ST. LOUIS SUPPLEMENT FOR F BOEING MILITARY
30M-NAS1351 NAS1351, BOEING-ST. LOUIS SUPPLEMENT FOR B BOEING MILITARY
30M-NAS1352 NAS1352, BOEING- ST LOUIS SUPPLEMENT FOR B BOEING MILITARY
30M-NAS1397 NAS1397 BOEING-ST.LOUIS SUPPLEMENT FOR NAS 1397 SUPPLEMENT BOEING MILITARY
30M-NAS1473 NAS1473, BOEING ST. LOUIS SUPPLEMENT FOR B BOEING MILITARY
30M-NAS1474 NAS1474 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-NAS1523 NAS1523 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-NAS1564 NAS1564, BOEING-ST. LOUIS SUPPLEMENT FOR NAS1564 NEW SUPPLEMENT BOEING MILITARY
30M-NAS1578 NAS1578 BOEING-ST. LOUIS SUPPLEMENT FOR E BOEING MILITARY
30M-NAS1580 SUPPLEMENT FOR NAS1580, BOEING ST. LOUIS G BOEING MILITARY
30M-NAS1581 NAS1581 BOEING-ST. LOUIS SUPPLEMENT FOR G BOEING MILITARY
30M-NAS1587 NAS1587, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1724 SUPPLEMENT FOR NAS1724, BOEING ST. LOUIS B BOEING MILITARY
30M-NAS1725 SUPPLEMENT FOR NAS1725, BOEING ST. LOUIS A BOEING MILITARY
30M-NAS1728 SUPPLEMENT FOR NAS1728, BOEING ST. LOUIS A BOEING MILITARY
30M-NAS1729 SUPPLEMENT FOR NAS1729, BOEING ST. LOUIS A BOEING MILITARY
30M-NAS1755 NAS1755, BOEING-ST.LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1756 NAS1756 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-NAS1769 SUPPLEMENT FOR NAS1769, BOEING ST. LOUIS B BOEING MILITARY
30M-NAS1791 NAS1791 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1792 NAS1792 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1793 NAS1793, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1794 NAS1794, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS1831 NAS1831 SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NAS424 NAS424 SUPPLEMENT FOR NAS424 SUPPLEMENT BOEING MILITARY
30M-NAS427 NAS427, BOEING-ST.LOUIS SUPP FOR NEW SUPPLEMENT BOEING MILITARY
30M-NAS561 SUPPLEMENT FOR NAS561, BOEING ST. LOUIS E BOEING MILITARY
30M-NAS6303 THR NAS6303 THRU NAS6320 NAS6303 THRU 6320 D SUPPLEMENT BOEING MILITARY
30M-NAS6403 THR NAS6403 THRU NAS6420 BOEING STL SUPPLEMENT FOR F SUPPLEMENT BOEING MILITARY
30M-NAS653 NAS653 THRU NAS658, BOEING ST.-ST. LOUIS SUPPLEMENT FOR B BOEING MILITARY
30M-NAS663 NAS663 THRU 668 BOEING-ST. LOUIS SUPPLEMENT FOR B BOEING MILITARY
30M-NAS671 NAS671, BOEING-ST.LOUIS SUPPLEMENT FOR NEW SUPPLEMENT BOEING MILITARY
30M-NAS673 THRU NAS673 THRU NAS678 BOEING STL SUPPLEMENT FOR D SUPPLEMENT BOEING MILITARY
30M-NAS6803 THR NAS6803 THRU NAS6820 BOEING STL SUPPLEMENT FOR E SUPPLEMENT BOEING MILITARY
30M-NASM122076 NASM122076 THRU NASM122115, BOEING ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM122116 NASM122116 THRU NASM122155, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM122156 NASM122156 THRU NASM122195, BOEING ST. LOUIS SUPPLEMENT SUPPLEMENT BOEING MILITARY
30M-NASM122196 NASM122196 THRU NASM122235 BOEING-ST. LOUIS SUPP FOR SUPPLEMENT BOEING MILITARY
30M-NASM122236 NASM122236 THRU NASM122275 BOEING STL SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM124651 NASM124651 THRU NASM124690, BOEING ST. LOUIS SUPPLEMENT SUPPLEMENT BOEING MILITARY
30M-NASM124691 NASM124691 THRU NASM124730 BOEING-ST. LOUIS SUPPLEMENT SUPPLEMENT BOEING MILITARY
30M-NASM124731 NASM124731 THRU NASM124770, BOEING-ST. LOUIS SUPPLEMENT SUPPLEMENT BOEING MILITARY
30M-NASM124771 NASM124771 THRU NASM124810, BOEING ST. LOUIS SUPPLEMENT SUPPLEMENT BOEING MILITARY
30M-NASM124811 NASM124811 THRU NASM124850, BOEING ST. LOUIS SUPPLEMENT SUPPLEMENT BOEING MILITARY
30M-NASM14144 NASM14144, BOEING ST-LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM14145 NASM14145, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM14164 NASM14164, BOEING ST.-LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM14181 NASM14181, BOEING¿ST. LOUIS SUPPLEMENT FOR B SUPPLEMENT BOEING MILITARY
30M-NASM14182 NASM14182, BOEING -ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM14200 NASM14200, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM14210 NASM14210, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM14219 NASM14219 BOEING-ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-NASM17828 NASM17828, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM21025 NASM21025 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM21042 NASM21042 BOEING-ST. LOUIS SUPPLEMENT FOR B BOEING MILITARY
30M-NASM21045 NASM21045, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM21209 NASM21209, BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM315 NASM315, BOEING ST. LOUIS SUPPLEMENT FOR NEW SUPPLEMENT BOEING MILITARY
30M-NASM35214 NASM35214 BOEING-ST.LOUIS SUPPLEMENT FOR A BOEING MILITARY
30M-NASM35649 NASM35649 BOEING-ST. LOUIS SUPPLEMENT FOR SUPPLEMENT BOEING MILITARY
30M-NASM35650 NASM35650 BOEING ST. LOUIS SUPPLEMENT FOR NEW SUPPLEMENT BOEING MILITARY
3M1024 SCREW, CLOSE TOLERANCE – ASSEMBLY, 100 DEG COUN C BOEING MILITARY
3M1025 SCREW, CLOSE TOLERANCE – ASSEMBLY, 100 DEG, C C BOEING MILITARY
3M1034 SCREW-CLOSE TOLERANCE, 100 DEG COUNTERSUNK, H BOEING MILITARY
3M1043 BOLT-CLOSE TOLERANCE, SPLINE, FLANGE HEAD, SEALANT INJECTION F BOEING MILITARY
3M1074 GROMMET-FASTENTER, RING RETAINING C BOEING MILITARY
3M1094 EYEBOLT ASSEMBLY, ENGINE MOUNT E BOEING MILITARY
3M1105 NUT, SELF-LOCKING, SPLINE – CRES, 180 KSI, DRY FILM C BOEING MILITARY
3M1165 SCREW-CLOSE TOLERANCE, 100 DEGREE COUNTERSUNK K BOEING MILITARY
3M1169 BOLT, 100 DEG TENSION HEAD, GEAR DRIVE RECESS-PH13-8MO (125 U BOEING MILITARY
3M1170 BOLT, 100 DEG REDUCED HEAD, GEAR DRIVE RECESS – PH13-8MO (12 U BOEING MILITARY
3M1186 BOLT-SELF RETAINING, IMPEDANCE TYPE, 450F, 125 KSI FSU C BOEING MILITARY
3M1215 BOLT-CLOSE TOLERANCE, SPLINE DRIVE NON-MAGNETIC, CORROSION R B BOEING MILITARY
3M1216 SCREW-CLOSE TOLERANCE, 100 DEG HEAD, OFFSET CR C BOEING MILITARY
3M1217 SCREW-CLOSE TOLERANCE, 100 DEG HEAD, OFFSET CR D BOEING MILITARY
3M1235 RIVET, BLIND – 100 DEGREES FLUSH HEAD, LOCKED SPINDLE L BOEING MILITARY
3M1239 RING RETAINING C BOEING MILITARY
3M1247 PIN-RIVET, FLUTED THREADS- SHEAR, PROTRUDING HEAD, HEX POINT G BOEING MILITARY
3M1248 PIN-RIVET, FLUTED THREADS- TENSION, PROTRUDING HEAD, HEX POI H BOEING MILITARY
3M1249 COLLAR, LOBULAR-PIN-RIVET, THREADED, SHEAR, ALUMINUM, TITANI H BOEING MILITARY
3M1250 FASTENER-HIGH STRENGTH QUICK RELEASE TYPE, C’SUNK HEAD, SLE M BOEING MILITARY
3M1252 PIN-RIVET, FLUTED THREADS-TENSION, 100 C’SUNK, HEX POINT DRI F BOEING MILITARY
3M1253 PIN-RIVET, FLUTED THREADS-TENSION, 100 C’SUNK, HEX POINT DRI F BOEING MILITARY
3M1254 PIN-RIVET, FLUTED THREADS-SHEAR, 100 C’SUNK, HEX POINT DRIVE F BOEING MILITARY
3M1255 PIN-RIVET, FLUTED THREADS-SHEAR, 100 C’SUNK, HEX POINT DRIVE H BOEING MILITARY
3M1256 PIN-RIVET, FLUTED THREADS-SHEAR, PROTRUDING HEAD, HEX POINT D BOEING MILITARY
3M1257 PIN RIVET, FLUTED THREADS-SHEAR, PROTRUDING HEAD, HEX POINT D BOEING MILITARY
3M1258 PIN-RIVET, FLUTED THREADS-TENSION, PROTRUDING HEAD, HEX POIN D BOEING MILITARY
3M1259 PIN-RIVET, FLUTED THREADS-TENSION, PROTRUDING HEAD, HEX POIN E BOEING MILITARY
3M1262 BOLT, 100 DEG REDUCED HEAD, GEAR DRIVE RECESS-SPECIAL THREAD K BOEING MILITARY
3M1273 BOLT – PAN HEAD, GEAR DRIVE, TITANIUM D BOEING MILITARY
3M1275 BOLT, 100 DEG TENSION HEAD, GEAR DRIVE RECESS, INCONEL 718 ( H BOEING MILITARY
3M1276 BOLT, 100 DEG TENSION HEAD, GEAR DRIVE RECESS, INCONEL 718 ( H BOEING MILITARY
3M1277 BOLT 100DEG REDUCED HEAD, GEAR DRIVE RECESS, INCONEL 718 (12 H BOEING MILITARY
3M1278 BOLT, 100DEG REDUCED HEAD, GEAR DRIVE RECESS, INCONEL 718 (1 J BOEING MILITARY
3M1279 FASTNER-BLIND, INTERNALLY THREADED, EXTERNAL, EXTERNAL SLEEV C BOEING MILITARY
3M1282 BOLT- PAN HEAD, GEAR DRIVE, INCONEL 718, 125 KSI FSU, 0.0312 E BOEING MILITARY
3M1288 SCREW, CAPTIVE, PHILLIPS RECESS C BOEING MILITARY
3M1296 NUT-DRILLED, JAM COARSE THREADS C BOEING MILITARY
3M1313 RECEPTACLE – TWO LUG, FLOATING
A BOEING MILITARY
3M1319 BOLT-SPECIAL PAN HEAD, GEAR DRIVE, INCONEL 718, 125 KSI FSU
C BOEING MILITARY
3M1321 RIVET, SOLID, 120 FLUSH INTERFERENCE SHEAR HEAD
A BOEING MILITARY
3M1323 BOLT 100DEG TENSION HEAD, GEAR DRIVE RECESS – PH13-8MO (125
A BOEING MILITARY
3M1325 BOLT, CLOSE TOLERANCE, SPLINE DRIVE, CRES (125 KSI FSU) SEAL
C BOEING MILITARY
3M1330 ROD, CONTINUOUS THREAD – CRES BOEING MILITARY
3M155 NUT-BARREL, 180 KSI, SELF-LOCKING AND NON-LOCKING
N BOEING MILITARY
3M303 FASTENER-SLEEVE BOLT, FLUSH HEAD,M ROTARY, QUICK OPERATING H AH BOEING MILITARY
3M463THRU3M465 NUT ASSEMBLY, SELF-LOCKING, GANG CHANNEL-VARIABLE C’BORE, DR BB BOEING MILITARY
3M707 SCREW, MACHINE-100DEG CSUNK, HI-TORQUE, REDUCED
J BOEING MILITARY
3M892 BOLT, HEX HEAD, CLOSE TOLERANCE, SHORT THREAD, TITANIUM ALLO
C BOEING MILITARY
3M893 SCREW-PAN HEAD, PHILLIPS RECESS
H BOEING MILITARY
3M898 BOLT, SHOULDER – SPLINE DRIVE, CRES (125 KSI FSU)
E BOEING MILITARY
3M902 SCREW, CLOSE TOLERANCE- ASSEMBLY, 100 DEG
F BOEING MILITARY
3M917 PIN-RIVET, THREADED- SHEAR, PROTRUDING HEAD, HEX POINT DRIVE
F BOEING MILITARY
3M925 SCREW, CLOSE TOLERANCE- ASSEMBLY,
J BOEING MILITARY
3M926 SCREW – CLOSE TOLERANCE
P BOEING MILITARY
3M927 SCREW- CLOSE TOLERANCE 100 DEG COUNTERSUNK
M BOEING MILITARY
3M932 BOLT – SHOULDER, HEX HEAD, CRES, 125 KSI FSU
H BOEING MILITARY
3M938 SCREW, MACHINE- 100 DEG
D BOEING MILITARY
3M939 SCREW, CLOSE TO TOLERANCE – 100 DEG
J BOEING MILITARY
3M943 PIN – INDEX AP BOEING MILITARY
3M949 RIVET – BLIND, 100DEG HEAD PULL THRU, A286
L BOEING MILITARY
3M950 SCREW, CLOSE TOLERANCE – ASSEMBLY,
D BOEING MILITARY
3M956 SCREW, MACHINE-100DEG CSUNK, DOVETAIL SLOT
D BOEING MILITARY
3M957 SCREW, MACHINE- 100 DEG CSUNK, HI- TORQUE
E BOEING MILITARY
3M958 SCREW- CLOSE TOLERANCE, 100 DEG CSUNK
E BOEING MILITARY
3M959 SCREW – CLOSE TOLERANCE, 100 DEG COUNTERSUNK
F BOEING MILITARY
3M975 RECEPTACLE, QUICK-RELEASE PIN
P BOEING MILITARY
3M989 BOLD – CLOSE TOLERANCE, HEX HEAD, SEALANT INJECTION, TITANIU
G BOEING MILITARY
40M114 DRAWING INTERPRETATION DOCUMENT
M BOEING MILITARY
40M123 MILITARY AIRCRAFT AND WEAPON PROGRAMS PARTS MANAGEMENT PLAN
D BOEING MILITARY
4M102 WASHER, KEY
F BOEING MILITARY
4M106 BUSHING, SLEEVE – CLAMP UP, SPECIAL AT BOEING MILITARY
4M116 WASHER- FLAT, NON-METALIC, SPECIAL
U BOEING MILITARY
4M264 WASHER – C’SUNK, TITANIUM, REPAIR
G BOEING MILITARY
4M286 BEARING, PLAIN, SELF-ALIGNING – SELF-LUBRICATING, LOW SPEED
C BOEING MILITARY
4M297 BEARING, PLAIN, SELF-ALIGNING – SELF-LUBRICATING, ALUMINUM A
L BOEING MILITARY
4M313 BUSHING-SWAGE, CRES, FOR USE IN ALUMINUM, TITANIUM AND CARBO
G BOEING MILITARY
4M315 BUSHING, REPAIR-100 DEG COUNTERSUNK, TWO PIECE
D BOEING MILITARY
4M335 WASHER – C’SUNK CRES
B BOEING MILITARY
4M36 WASHER-FLAT, METAL, SPECIAL AW BOEING MILITARY
4M363 BEARING, PLAIN – SELF-ALIGNING, FLANGE RACE, THREADED RETAIN
D BOEING MILITARY
4M373 LOCKNUT AND RETAINER ASSEMBLY
F BOEING MILITARY
4M377 BUSHING, SLEEVE – TAPERED FLANGE, PRESS FIT, SPECIAL
B BOEING MILITARY
4M38 WASHER – FLAT, LAMINATED SHIM
H BOEING MILITARY
4M381 BUSHING, SLEEVE – PLAIN, PRESS FIT
B BOEING MILITARY
4M383 BUSHING, SLEEVE – STAKE, FLANGED, PRESS FIT, SPECIAL
B BOEING MILITARY
4M394 BEARING, PLAIN, SELF ALIGNING, THREADED OUTER RING, NARROW,
A BOEING MILITARY
4M396 BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, WIDE, FLANG
A BOEING MILITARY
4M399 BUSHING – SPECIAL, OVERSIZE
B BOEING MILITARY
4M43 BUSHING, SLEEVE – PRESS-FIT, STEEL, BRONZE, BERYLLIUM COPPER
W BOEING MILITARY
4M49 SHIM GANG CHANNEL
W BOEING MILITARY
5M12 COVER PLATE – ELECTRICAL RECEPTACLE HOLE
G BOEING MILITARY
5M1681 KNOW, NON-ILLUMINATED-PUSH, SPECIAL SHAPE
D BOEING MILITARY
5M1692 SWITCH, PUSHBUTTON, ILLUMINATED MOMENTARY ACTION (LOW LEVEL)
Y BOEING MILITARY
5M1698 LAMP, INCANDESCENT, T-2 1/4 BULB, HALOGEN FILLED
C BOEING MILITARY
5M1707 CONNECTOR – RECEPTACLE FILTER, FEED THRU, INTEGRALLY LIGHTED
K BOEING MILITARY
5M1709 CONNECTOR, COAXIAL, RF-PLUG, STRAIGHT, LANYARD RELEASE (RG40
E BOEING MILITARY
5M1758 SWITCH – ROTARY, 6 POLE, 5 POSITION
G BOEING MILITARY
5M1774 KNOB-CONCENTRIC, NON ILLUMINATED
E BOEING MILITARY
5M1784 STRAIN UNIT – FATIGUE MONITORING
H BOEING MILITARY
5M1800 CONNECTOR – COAXIAL, RADIO FREQUENCY, BNC INLINE RECEPTACLE
E BOEING MILITARY
5M1817 CONNECTOR, PLUG, ELECTRICAL, THREADED COUPLING, SELF-LOCKING
F BOEING MILITARY
5M1822 RESISTOR ASSEMBLY- MATCHED SET
R BOEING MILITARY
5M1949 ADAPTER – CONVOLUTED TUBING TO HYDRAULIC FITTING
C BOEING MILITARY
5M1972 CONNECTOR, ELECTRICAL, RECTANGULAR-PLUG. EMI PROTECTED AC BOEING MILITARY
5M1980 SWITCH, PUSHBUTTON, ILLUMINATED/NON-ILLUMINAT
J BOEING MILITARY
5M1988 CONNECTOR – COAXIAL, RADIO FREQUENCY SERIES HN, PLUG
E BOEING MILITARY
5M2041 CONNECTOR-INSERT ELECTRICAL
B BOEING MILITARY
5M2251 CONTACTS-ELECTRICAL, CONNECTOR, TRIAX (FOR MIL-DTL-38999, SE
J BOEING MILITARY
5M2255 CONNECTOR-ELECTRICAL, RECEPTACLE, RESISTOR ASSEMBLY, MIL-DTL
D BOEING MILITARY
5M2415 SWITCH-MULTIPOLE, MULTIPOSITION, LEVERLOCK
H BOEING MILITARY
5M2426 CONNECTOR ACCESSORIES-COVER, RECEPTACLE, MIL-DTL-38999 SERIE
L BOEING MILITARY
5M2482 SWITCH, ROTARY, MINIATURE, 36DEGREES INDEXING,
F BOEING MILITARY
5M2483 SWITCH, ROTARY WITH PUSHBUTTON CONCENTRIC SHAF
D BOEING MILITARY
5M2488 KNOB-POINTER, ILLUMINATED, WITH SERRATION GROOVES AND SKIRTD BOEING MILITARY
5M250 CAP – INSULATING, HEAT SHRINKABLE
R BOEING MILITARY
5M2500 KNOB-POINTER, ILLUMINATED, TACTILE
C BOEING MILITARY
5M2504 KNOB – POINTER, ILLUMINATE, OUTER CON SHAFT USE
B BOEING MILITARY
5M2505 KNOB-PUSH BUTTON, JETTISON
B BOEING MILITARY
5M2509 FLOODLIGHT, ELECTRICAL – BUSHING MOUNT, NIGHT VISION GOGGLE,
L BOEING MILITARY
5M2804 SWITCH, ROTARY, SEALED, MIL-DTL-3786/4 TYPE H
J BOEING MILITARY
5M2816 TERMINAL STUD, BONDED-ELECTRICAL
B BOEING MILITARY
5M2866 RELAY, ELECTROMAGNETIC, HERMETICALLY SEALED
C BOEING MILITARY
5M2867 COUPLER, TRANSMISSION, INLINE, MIL-STD-1553B
M BOEING MILITARY
5M2919 CONNECTOR ACCESSORY, BACKSHELL, STRAIGHT, STRAIN RELIEF, EMI
J BOEING MILITARY
5M2920 CONNECTOR ACCESSORY, BACKSHELL RIGHT ANGLE, STRAIN RELIEF, E
L BOEING MILITARY
5M2938 JUMPER ASSEMBLY, ELECTRIC, RF BONDING
N BOEING MILITARY
5M2953 CONNECTOR ACCESSORY, BACKSHELL, 45, STRAIN RELIEF, EMI, FOR
J BOEING MILITARY
5M2975 CONNECTOR TERMINATION, ELECTRICAL-COAX, TNC MALE, 50 OHM
D BOEING MILITARY
5M2997 TERMINAL, STUD, BLIND, FOR ELECTRICAL BONDING
D BOEING MILITARY
5M3006 LIGHT ASSEMBLY-INDICATOR PANEL, CAUTION LIGHTS NIGHT VISION
H BOEING MILITARY
5M3007 LIGHTED, SWITCH/INDICATOR ASSEMBLY, NIGHT VISION IMAGING SYS
E BOEING MILITARY
5M3012 FLOODLIGHT, ELECTRICAL-FRONT PANEL, NIGHT VISION IMAGING SYS
C BOEING MILITARY
5M3014 LIGHT ASSEMBLY INDICATOR, NIGHT IMAGING SYSTEMS (NVIS) COMPA
B BOEING MILITARY
5M3015 LIGHT ASSEMBLY-INDICATOR PANEL, HORIZONTAL CAUTION LIGHTS NI
G BOEING MILITARY
5M3016 SWITCH-PUSH-BUTTON, EXTENDED LENGTH
E BOEING MILITARY
5M3017 LIGHT, INDICATOR, NIGHT VISION IMAGING SYSTEM (NVIS) COMPATI
C BOEING MILITARY
5M3018 LIGHT ASSEMBLY, INDICATOR, NIGHT VISION IMAGING SYSTEM (NVIS
C BOEING MILITARY
5M3100 SENSOR DIELECTRIC BOEING MILITARY
5M3122 SOCKET, PLUG-IN ELECTRONIC COMPONENT, FOR 5 AM
C BOEING MILITARY
5M3135 CONNECTOR – BLUG, FOUR LUG, ELECTRICAL, TRIAXIAL, RADIO FREQ
B BOEING MILITARY
5M3136 COUPLER, DATA BUS, MIL-STD-1553, DUAL
C BOEING MILITARY
5M3137 SHIELD TERMINATION, SOLDER STYLE, INSULATED, H
B BOEING MILITARY
5M3141 CONNECTORS
B BOEING MILITARY
5M3142 CONNECTORS, ELECTRICAL, RECEPTACLE
B BOEING MILITARY
5M3150 SWITCH- PUSH BUTTON,MOMENTARY, NORMALLY OPEN
C BOEING MILITARY
5M3155 CONNECTOR, ELECTRICAL, CIRCULAR, THREADED PLUG, METAL SHELL,
E BOEING MILITARY
5M3156 CONNECTOR, ELECTRICAL, RECTANGULAR-PLUG, EMI PROTECTED, ARIN
C BOEING MILITARY
5M3160 SWITCH, PUSHBUTTON, ILLUMINATED/ NON-ILLUMINATE
B BOEING MILITARY
5M3163 CABLE, RADIO FREQUENCY (RF), FLEXIBLE, TWINAXIAL, 100 OHMS
A BOEING MILITARY
5M3166 CABLE, ELECTRICAL, MULTICONDUCTOR, DOUBLE SHIELD, DOUBLE JAC BOEING MILITARY
5M3167 CABLE, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 50 OHMS, DOUBLE S
A BOEING MILITARY
5M3175 CONNECTOR, PLUG, ELECTRICAL, COAXIAL, READIO FREQUENCY (SERI
A BOEING MILITARY
5M3177 CABLE, RADIO FREQUENCY, FLEXIBLE, TWINAXIAL, DIGITAL DATA BU
A BOEING MILITARY
5M3178 SWITCH, ROTARY, CLOSED CONSTRUCTION, SEALED ORG BOEING MILITARY
5M3179 CABLE, RADIO FREQUENCY, COAXIAL, 95 OHM B BOEING MILITARY
5M3180 COVER, ELECTRICAL, CONNECTOR, AUDIO RECEPTACLE A BOEING MILITARY
5M3187 SWITCHES A BOEING MILITARY
5M3188 BACKSHELL ELECTRICAL CONNECTOR, CABLE CLAMP, ADAPTER, ALUMIN BOEING MILITARY
5M3189 CABLE, ELECTRICAL, 100 OHM SHIELDED QUAD 100 BASE-T ETHERNET D BOEING MILITARY
5M3190 SWITCH, SENSITIVE, PLUNGER, 7 AMPERES A BOEING MILITARY
5M3191 CABLE, ETHERNET, FOUR TWISTED SHIELDED PAIRS, 24 AWG, SHIELD B BOEING MILITARY
5M3192 CABLE, ETHERNET, TWISTED SHIELDED PAIR, 24 AWG SHIELDED AND C BOEING MILITARY
5M3193 CONNECTOR, MINIATURE AUDIO, M55116 SERIES, PLUG NEW BOEING MILITARY
5M3194 SWITCH, TOGGLE- LEVER LOCK A BOEING MILITARY
5M3196 FUSE, CURRENT LIMITER A BOEING MILITARY
5M3197 FUSE BLOCK NEW BOEING MILITARY
5M333 SWITCH-TOGGLE, MAGNETIC HOLD-IN, SINGLE POLE, AJ BOEING MILITARY
5M9 BUS BAR-CIRCUIT BREAKER K BOEING MILITARY
6D0012 CUTOUT AND MTG PATTERN, FLUSH LATCHES, STANDARD DIMENSIONS F H BOEING MILITARY
6M141 TYPE CODES, BUS BAR B BOEING MILITARY
6M148 INSTRUCTIONS REGARDING PROCUREMENT AND INTERCHANGEABILITY INFORMATION ON
STANDARD PART DRAWINGS
H BOEING MILITARY
6M169 CUTOUT AND MOUNTING PATTERN-ST9M429 LATCH, STANDARD DIMENSION FOR NEW BOEING MILITARY
6M185 SERRATIONS – STRAIGHT, SURFACE, STANDARD DIMENSIONS FOR B BOEING MILITARY
6M187 SPECIMEN – LAP SHEAR, TITANIUM E BOEING MILITARY
6M199 PLATE, IDENTIFICATION – NON TYPE DESIGNATED ITEMS, PER MIL-S C BOEING MILITARY
6M227 BLOCK, CLAMP – TUBE SUPPORT, BUILDUP NUMBER FOR D BOEING MILITARY
6M229 KNOT FIBER REINFORCED PLASTIC DETAILS A BOEING MILITARY
6M248 BUSHING INSTALL- COUNTERSINK SWAGED RETENTION C BOEING MILITARY
6M284 TUBING END, ROTATIONAL MOLDING BEAD A BOEING MILITARY
6M297 PLATE, IDENTIFICATION-UNIQUE IDENTIFICATION (UID) A BOEING MILITARY
6M39 STANDARD BEND RADII AB BOEING MILITARY
6M51 STANDARD JOGGLES V BOEING MILITARY
6M54 HOLE – FLANGED, SINGLE 45 DEGREES (LIGHT GAUGE) K BOEING MILITARY
6M62 CUTOUTS AND MOUNTING PATTERNS, STANDARD DIMENSIONS FOR AH BOEING MILITARY
6M79 PARABOLIC FILLETS E BOEING MILITARY
6M99 PLATE – IDENTIFICATION, CONTENTS DATA, DESIGN OF E BOEING MILITARY
7M1039 SEAL, BOSS – FLUID FITTING, METALLIC B BOEING MILITARY
7M1062 UNION – TUBE, FLARED, SWIVEL NUT D BOEING MILITARY
7M1113 FILTER, FLUID, LIQUID COOLING SYSTEM G BOEING MILITARY
7M1163 RESTRICTOR, FLUID FLOW-ONE WAY B BOEING MILITARY
7M1181 ADAPTER, STRAIGHT, TUBE – MAIL BEAM SEAL REDUCER, 5000 PSI A BOEING MILITARY
7M1233 VALVE, CHECK-LINE MOUNTED, PAO FLUID B BOEING MILITARY
7M1253 ELBOW, TUBE – 45 DEGREE, SWIVEL NUT ENDS, BEAM SEAL, 5000 PS A BOEING MILITARY
7M1255 CAP, QUICK DISCONNECT -PROTECTIVE, DUST AND MOISTURE SEAL A BOEING MILITARY
7M1256 PLUG, QUICK DISCONNECT-PROTECTIVE PRESSURE SEAL B BOEING MILITARY
7M1261 COUPLING HALF, QUICK DISCONNECT, SELF SEALING, HOSE ATTACHIN A BOEING MILITARY
7M1263 COUPLING HALF, QUICK DISCONNECT, SELF SEALING A BOEING MILITARY
7M1265 RESTRICTOR, FLUID FLOW-BLANK UNION, FLARED D BOEING MILITARY
7M1266 COUPLING HALF, QUICK DISCONNECT, SELF SEALING, HOSE ATTACHIN A BOEING MILITARY
7M1267 HOSE ASSEMBLY, FLANGED, TEFLON, LOW PRESSURE – CRIMPED C BOEING MILITARY
7M1272 COUPLING HALF, QUICK DISCONNECT, SELF SEALING, HOSE ATTACHIN C BOEING MILITARY
7M1275 COUPLING HALF, QUICK DISCONNECT, SELF SEALING, HOSE ATTACHIN C BOEING MILITARY
7M1276 COUPLING HALF, QUICK DISCONNECT, SELF SEALING, HOSE ATTACHIN C BOEING MILITARY
7M1277 HOSE ASSEMBLY, FLANGED TO FLARED, REDUCER, PTFE, LOW PRESSUR BOEING MILITARY
7M1278 HOSE ASSEMBLY, FLANGED TO FLARED, PTFE, LOW PRESSURE BOEING MILITARY
7M1279 HOSE ASSEMBLY, FLANGED TO FLANGED, PTFE, LOW PRESSURE BOEING MILITARY
7M128 PACKING WITH RETAINER F BOEING MILITARY
7M1281 VALVE, CHECK-LINE MOUNTED A BOEING MILITARY
7M1282 RESTRICTOR, FLUID FLOW- BLANK, UNION, FLARED B BOEING MILITARY
7M151 TEE, TUBE- FLARED, SWIVEL NUT ON RUN M BOEING MILITARY
7M160 WIRE-RETAINER, SWIVEL NUT G BOEING MILITARY
7M482 HOSE ASSEMBLY, NONMETALLIC – LOW PRESSURE
G BOEING MILITARY
7M491 ELBOW, TUBE -45 DEG. BULKHEAD SWAGELOK TO FLARED TUBE
C BOEING MILITARY
7M494 ELBOW, TUBE – 90, SWAGELOK TO FLARED SWIVEL NUT
C BOEING MILITARY
7M495 ELBOW, TUBE -45 DEG, SWAGELOK TO FLARED SWIVEL NUT
C BOEING MILITARY
7M499 ADAPTER-STRAIGHT, FLANGE TO TUBE, SPECIAL
D BOEING MILITARY
7M513 HOSE ASSEMBLY, NON METALLIC-TFE, WITH INTEGRAL FIRESLEEVE
C BOEING MILITARY
7M514 COUPLING HALF, QUICK DISCONNECT-NIPPLE, SELF-SEALING
E BOEING MILITARY
7M526 CONNECTOR, TUBE COUPLING, BULKHEAD, BEAM SEAL
M BOEING MILITARY
7M545 VALVE, INSERT CHECK – BIPETAL
R BOEING MILITARY
7M640 VALVE ELEMENT – SWING CHECK, FUEL
D BOEING MILITARY
7M640REP VALVE ELEMENT – SWING CHECK, FUEL
N BOEING MILITARY
7M684 HOSE ASSEMBLY- NON- METALLIC, LOW PRESSURE, FLARE TUBE TO 45
C BOEING MILITARY
7M685 COUPLING HALF, QUICK DISCONNECT, NON-SELF SEALING, NIPPLE
A BOEING MILITARY
7M736 GAGE, PRESSURE, DIAL INDICATING-GENERAL PURPOSE, 0-30 PSI
B BOEING MILITARY
7M737 CONNECTOR, TUBE- STRAIGHT THREAD BOSS, SWAGELOK
C BOEING MILITARY
7M749 INDICATOR, LIQUID LEVEL
D BOEING MILITARY
7M772 COUPLING HALF, QUICK DISCONNECT – SELF SEALING, NIPPLE
C BOEING MILITARY
7M850 CONNECTOR ASSEMB- ANTI G-SUIT, FEMALE
A BOEING MILITARY
7M891 DISCONNECT, FUEL – WING AND PYLON
F BOEING MILITARY
7M909 TEE-REDUCER, SWIVEL NUTS ON RUN
B BOEING MILITARY
7M910 ELBOW-THICK BULKHEAD, 45 DEGREE, BEAM SEAL
E BOEING MILITARY
7M911 ELBOW-THICK BULKHEAD, 90 DEGREES, BEAM SEAL (MALE)
E BOEING MILITARY
7M979 TEE-SWIVEL NUT ON RUN (BEAM SEAL) 5000 PSI
C BOEING MILITARY
9D0017 LATCH ASSEMBLY – PUSH BUTTON, HEAVY DUTY
G BOEING MILITARY
9D0147 POST, ELECTRICAL-MECHANICAL EQUPMENT-2HOLE MT
A BOEING MILITARY
9D0190 STRAP, WEBBING – HAND GRIP
A BOEING MILITARY
9D0204 D-RING HANDLE ASSEMBLY. BOEING MILITARY
9D0207 PANEL, STRUCTURAL, AIRCRAFT, HONEYCOMB SANDWICH LIGHTWEIGHT BOEING MILITARY
9M1014 STRAP, TIE DOWN, METALLIC
H BOEING MILITARY
9M1066 CASE, SHIPPING AND STORAGE, POLYETHYLENE
B BOEING MILITARY
9M1072 LUG ASSEMBLY – 3/4 BAND CLAMP BOEING MILITARY
9M1073 CLAMP, HOSE, FLAT BAND, CUSHIONED BOEING MILITARY
9M1084 LOW DUROMETER SOLID PULL PLUG
C BOEING MILITARY
9M148 RECEPTACLE- TURNLOCK FASTNER, ONE & TWO LUG
J BOEING MILITARY
9M152 RECEPTACLE-AIRLOC FASTENER
F BOEING MILITARY
9M161 FASTENER – CONTROL PANEL STUD ASSEMBLY
R BOEING MILITARY
9M164 RECEPTACLE, TURNLOCK FASTENER, ANGLE MOUNTING
J BOEING MILITARY
9M171 BEARING, BALL, CABLE END-SWAGING
L BOEING MILITARY
9M174 GROMMET, RUBBER-CABLE PRESSURE SEAL
A BOEING MILITARY
9M187 RING, RETAINING- EXTERNAL, SPIROLOX
H BOEING MILITARY
9M201 BUTTON, PLUG-STEEL
K BOEING MILITARY
9M219 CORD ASSEMBLY – ELASTIC (FOR G.S.E.)
J BOEING MILITARY
9M281 CLAMP-TUBE GRIP SUPPORT
D BOEING MILITARY
9M640 CASE COMPONENTS-COMBINATION
G BOEING MILITARY
9M663 CLOSURE ORIFICE – AIR INLET SEAL
D BOEING MILITARY
9M702 CLAMP, BLOCK – TUBE SUPPORT, PLASTIC AG BOEING MILITARY
9M731 BUTTON, PLUG – PLASTIC, RECTANGULAR
M BOEING MILITARY
9M736 GROMMET, RUBBER – OIL AND FUEL RESISTANT
E BOEING MILITARY
9M744 RETAINER, BLOCKING-CIRCUIT BREAKER
C BOEING MILITARY
9M789 COVER ASSEMBLY – SMALL ROUND ACCESS, INTERNAL HEX RECESS
E BOEING MILITARY
9M830 LATCH ASSEMBLY BAIL RETENTION
G BOEING MILITARY
9M858 GROMMET – SPLIT, TEFLON, WIDE GRIP
H BOEING MILITARY
9M909 PUNCH/ANVIL, FOR INSTALLATION OF SWAGE TYPE BUSHING
C BOEING MILITARY
9M927 MOUNT, RESILIENT-VIBRATION, HEAVY DUTY, SQUARE PLATE
E BOEING MILITARY
9M937 CASE-COMBINATION, ALUMINUM ALLOY, FOUR LATCH
E BOEING MILITARY
9M952 PLUNGER, NYLON BALL- CRES BODY, FINE THREAD
A BOEING MILITARY
9M963 SPRING, CANTED-COIL
B BOEING MILITARY
9M973 MOUNT, VIBRATION-ISOLATOR, HEAVY-LOAD
D BOEING MILITARY
9M982 MOUNT, RESILIENT – VIBRATION C BOEING MILITARY
AS126275THRAS126586 AS126275 THRU AS126586 BOEING STL SUPPLEMENT FOR ORG BOEING MILITARY
BMS10-103 NONCHROMATED PRIMER FOR COMPOSITES D BOEING MILITARY
BMS10-107 WATER BASED SCREEN PRINTING INKS BOEING MILITARY
BMS10-107 WATER BASED SCREEN PRINTING INKS F QPL BOEING MILITARY
BMS10-11 CHEMICAL AND SOLVENT RESISTANT FINISH AC BOEING MILITARY
BMS10-11 CHEMICAL AND SOLVENT RESISTANT FINISH AC QPL ORG BOEING MILITARY
BMS10-128 SOL-GEL CONVERSION COATING FOR PAINT APPLICATIONS A BOEING MILITARY
BMS10-128 BOEING MATERIAL SPECIFICATION QUALIFIED PRODUCTS LIST B QPL A BOEING MILITARY
BMS10-20 CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANK N BOEING MILITARY
BMS10-20N CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANK QPL ORG BOEING MILITARY
BMS11-9 METHYL PROPYL KETONE F BOEING MILITARY
BMS11-9 METHYL PROPYL KETONE F QPL ORG BOEING MILITARY
BMS13-60R WIRE ELECTRIC, ARC RESISTANT, 600 VOLTS RMS, ANNEALED COPPER QPL B BOEING MILITARY
BMS15-5 WIPER, ABSORBENT, PROCESS CLEANING H BOEING MILITARY
BMS3-32 LANDING GEAR SHOCK STRUT FLUID, ANTI-WEAR C BOEING MILITARY
BMS4-6 FLEXIBLE 5052 ALUMINUM ALLOY CORE L BOEING MILITARY
BMS4-6 FLEXIBLE 5052 ALUMINUM ALLOY CORE L QPL H BOEING MILITARY
BMS5-137 STRUCTURAL ADHESIVE FOR ACOUSTIC PANELS – 350 F SERVICE L BOEING MILITARY
BMS5-137 STRUCTURAL ADHESIVE FOR ACOUSTIC PANELS – 350 F SERVICE L QPL ORG BOEING MILITARY
BMS5-141 ADHESIVE, ROOM TEMPERATURE CURE, HIGH TEMPERATURE RESISTANT A BOEING MILITARY
BMS5-141 ADHESIVE, ROOM TEMPERATURE CURE, HIGH TEMPERATURE RESISTANT A QPL D BOEING MILITARY
BMS5-142 LOW DENSITY SEALANT G BOEING MILITARY
BMS5-142 LOW DENSITY SEALANT G QPL A BOEING MILITARY
BMS5-146 CARGO LINER JOINT SEALING TAPES A BOEING MILITARY
BMS5-146 CARGO LINER JOINT SEALING TAPES QPL A BOEING MILITARY
BMS5-154 ADHESIVE FOR COMPOSITE BONDING J BOEING MILITARY
BMS5-154 ADHESIVE FOR COMPOSITE BONDING J QPL ORG BOEING MILITARY
BMS5-157 ADVANCED INSULATION BLANKET TAPES K BOEING MILITARY
BMS5-162 SOL-GEL COATING FOR STRUCTURAL METAL BONDING. ORG BOEING MILITARY
BMS5-162 SOL-GEL COATING FOR STRUCTURAL METAL BONDING. ORG QPL A BOEING MILITARY
BMS5-164 ADHESIVE, METHACRYLATE, FOR COMPOSITE REPAIR APPLICATIONS C BOEING MILITARY
BMS5-164 ADHESIVE, METHACRYLATE, FOR COMPOSITE REPAIR APPLICATIONS C QPL A BOEING MILITARY
BMS5-168 FAST CURE FUEL TANK SEALANT ORG BOEING MILITARY
BMS5-168 FAST CURE FUEL TANK SEALANT QPL B BOEING MILITARY
BMS5-28 HONEYCOMB EDGE FILLING AND PLOTTING COMPOUND AN BOEING MILITARY
BMS5-28 HONEYCOMB EDGE FILLING AND PLOTTING COMPOUND AN QPL ORG BOEING MILITARY
BMS5-45 FUEL TANK SEALANT H BOEING MILITARY
BMS5-45 FUEL TANK SEALANT H QPL A BOEING MILITARY
BMS5-63 FIREWALL SEALANT, HYDRAULIC FLUID RESISTANT N BOEING MILITARY
BMS5-63 FIREWALL SEALANT, HYDRAULIC FLUID RESISTANT N QPL A BOEING MILITARY
BMS5-89 CORROSION INHIBITING ADHESIVE PRIMER T BOEING MILITARY
BMS5-89 CORROSION INHIBITING ADHESIVE PRIMER T QPL REV ORG BOEING MILITARY
BMS7-186 ALUMINUM ALLOY FORGINGS M BOEING MILITARY
BMS7-247 TITANIUM 6AI-4V FORGINGS PREMIUM QUALITY J BOEING MILITARY
BMS7-247 TITANIUM 6AI-4V FORGINGS PREMIUM QUALITY J QPL B BOEING MILITARY
BMS7-249 VACCUM ARC REMELTED SAE 9310 STEEL BARS, FORGINGS, AND FORGI C BOEING MILITARY
BMS7-249 VACCUM ARC REMELTED SAE 9310 STEEL BARS, FORGINGS, AND FORGI A BOEING MILITARY
BMS7-306 HIGH STRENGTH, CORROSION RESISTANT ALUMINUM ALLOY EXTRUSIONS K BOEING MILITARY
BMS7-306 HIGH STRENGTH, CORROSION RESISTANT ALUMINUM ALLOY EXTRUSIONS K QPL A BOEING MILITARY
BMS7-323 HIGH STRENGTH FATIGUE TOLERANT, STRESS CORROSION RESISTANT 7 E BOEING MILITARY
BMS7-323 HIGH STRENGTH FATIGUE TOLERANT, STRESS CORROSION RESISTANT 7 E QPL B BOEING MILITARY
BMS7-351 15-5PH (UNS S15500) CORROSION RESISTANT BAR, FORGINGS, EXRUS A BOEING MILITARY
BMS7-351 15-5PH (UNS S15500) CORROSION RESISTANT BAR, FORGINGS, EXRUS ORG QPL REV B BOEING MILITARY
BMS7-360 TITANIUM 5AI-5V-5MO-3CR DIE FORGING AND BARS H BOEING MILITARY
BMS7-360 TITANIUM 5AI-5V-5MO-3CR DIE FORGING AND BARS H QPL C BOEING MILITARY
BMS7-373 COPPER NICKEL TIN ALLOY BAR, EXTRUDED ROD AND TUBE, 77CU-15N A BOEING MILITARY
BMS7-373 COPPER NICKEL TIN ALLOY BAR, EXTRUDED ROD AND TUBE, 77CU-15N A QPL B BOEING MILITARY
BMS7-376 ALUMINUM-LITHIUM ALLOY 2099 PLATE C BOEING MILITARY
BMS7-376 ALUMINUM-LITHIUM ALLOY 2099 PLATE C QPL ORG BOEING MILITARY
BMS7-381 HIGH STRENGTH, DAMAGE TOLERANT, CORROSION RESISTANT 7XXX ALU C BOEING MILITARY
BMS7-381 HIGH STRENGTH, DAMAGE TOLERANT, CORROSION RESISTANT 7XXX ALU C QPL ORG BOEING MILITARY
BMS7-394 HIGH CONDUCTIVITY, MODERATE STRENGTH ALUMINUM ALLOY EXTRUSI B BOEING MILITARY
BMS7-394 HIGH CONDUCTIVITY, MODERATE STRENGTH ALUMINUM ALLOY EXTRUSI B QPL ORG BOEING MILITARY
BMS8-139 GLASS FABRIC PREIMPREGNATED HIGH-TEMPERATURE RESISTANT EPOXY N BOEING MILITARY
BMS8-139 GLASS FABRIC PREIMPREGNATED HIGH-TEMPERATURE RESISTANT EPOXY N QPL A BOEING MILITARY
BMS8-151 EPOXY PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANE N BOEING MILITARY
BMS8-151 EPOXY PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANE N QPL ORG BOEING MILITARY
BMS8-246 COATED, TRANSPARENT POLYCARBONATE MATERIALS K BOEING MILITARY
BMS8-246 COATED, TRANSPARENT POLYCARBONATE MATERIALS K QPL ORG BOEING MILITARY
BMS8-276 ADVANCED COMPOSITES W BOEING MILITARY
BMS8-276 ADVANCED COMPOSITES W QPL ORG BOEING MILITARY
BMS8-297H EPOXY PREIMPREGNATED CARBON TAPE AND WOVEN FABRIC FOR AIRCRA H BOEING MILITARY
BMS8-297H EPOXY PREIMPREGNATED CARBON TAPE AND WOVEN FABRIC FOR AIRCRA H QPL E BOEING MILITARY
BMS8-317A POLYETHER ETHER KETONE (PEEK) THERMOPLASTIC INJECTION MOLDIN ORG BOEING MILITARY
BMS8-317A POLYETHER ETHER KETONE (PEEK) THERMOPLASTIC INJECTION MOLDIN ORG QPL F BOEING MILITARY
BMS8-331 ADVANCED COMPOSITES – 350 F CURE EPOXY PREIMPREGNATED FIBERG H BOEING MILITARY
BMS8-331 ADVANCED COMPOSITES – 350 F CURE EPOXY PREIMPREGNATED FIBERG H QPL ORG BOEING MILITARY
BMS8-336 EXPANDED METAL FOIL FOR LIGHTNING STRIKE PROTECTION OF COMPO G BOEING MILITARY
BMS8-336 EXPANDED METAL FOIL FOR LIGHTNING STRIKE PROTECTION OF COMPO G QPL ORG BOEING MILITARY
BMS8-407 THERMALLY CONDUCTIVE GRAPHITE SHEETS A BOEING MILITARY
BMS8-407 THERMALLY CONDUCTIVE GRAPHITE SHEETS A QPL ORG BOEING MILITARY
BPS-B-241 BRACKET, SYSTEM RACEWAY B BOEING MILITARY
BPS-D-213 DUCTS, AIR, FLEXIBLE AND SEMI RIGID NON METALLIC A BOEING MILITARY
BPS-F-69S FASTENERS, EXTERNALLY THREADED SUP BJ BOEING MILITARY
BPS-N-70 NUT, SELF-LOCKING SUP BT BOEING MILITARY
BPS-N-70 NUT, SELF-LOCKING AR BOEING MILITARY
BPS-P-170 PROCESS CONTROL REQUIREMENTS FOR FASTENERS C BOEING MILITARY
BSS7006 IDENTIFICATION-CLASSIFICATION AND STORAGE OF WELDING AND BRA D BOEING MILITARY
BSS7011 GUIDELINES FOR THE APPLICATION OF PAINT C BOEING MILITARY
BSS7011 GUIDELINES FOR THE APPLICATION OF PAINT SSD6-1 BOEING MILITARY
BSS7015 DIMENSIONAL CONTROL OF CASTINGS AND FORGINGS ORG BOEING MILITARY
BSS7023 MANUFACTURING FACILITIES WITH APPROVED OPERATING PROCEDURES AA BOEING MILITARY
BSS7029 FIRST PART QUALIFICATION (FPQ) PROCEDURES AND REQUIREMENTS F C BOEING MILITARY
BSS7039 LIQUID PENETRANT INSPECTION PSD6-4 BOEING MILITARY
BSS7039 LIQUID PENETRANT INSPECTION PSD6-5 BOEING MILITARY
BSS7039 LIQUID PENETRANT INSPECTION C BOEING MILITARY
BSS7039 LIQUID PENETRANT INSPECTION DEP 6-6 BOEING MILITARY
BSS7041 RADIOLOGIC INSPECTION, RADIOGRAPHY (FILM) D BOEING MILITARY
BSS7043 RADIOLOGIC INSPECTION, STORAGE PHOSPHOR PLATE B BOEING MILITARY
BSS7055 ULTRASONIC INSPECTION, WROUGHT PRODUCTS B BOEING MILITARY
BSS7061 REQUIREMENTS FOR TIME AND TEMPERATURE RECORDS USED WITH TATS B BOEING MILITARY
BSS7063 GENERAL REQUIREMENTS FOR CERTIFICATION OF ELECTRICAL TERMINA C BOEING MILITARY
BSS7063 GENERAL REQUIREMENTS FOR CERTIFICATION OF ELECTRICAL TERMINA SSD6-27 BOEING MILITARY
BSS7064 CERTIFICATION OF ELECTRICAL CRIMP TOOLS BY GO NOGO GAGING C BOEING MILITARY
BSS7065 CERTIFICATION OF ELECTRICAL CRIMP TOOLS BY MINIMUM AND MAXIM C BOEING MILITARY
BSS7082 PREPRODUCTION VERIFICATION (PPV) PROCEDURES AND REQUIREMENTS A BOEING MILITARY
BSS7084 PRE-APPROVED STATISTICAL SAMPLINGPLANS A BOEING MILITARY
BSS7100 ALTERNATIVES DOCUMENT – PROCESSES, MATERIALS AND PARTS R BOEING MILITARY
BSS7217 AIR CLEANLINESS, SHOP COMPRESSED AIR C BOEING MILITARY
BSS7219 INTERGRANULAR ATTACK, TEST METHOD E BOEING MILITARY
BSS7286 STATISTICAL PROCESS CONTROL OF DESIGNATED ENGINEERING CHARAC B BOEING MILITARY
BSS7341 PART/TOOL THERMAL PROFILING PROCEDURE ORG BOEING MILITARY
BSS7343 NONDESTRUCTIVELY DETERMINING PRESENCE OF NON-VISIBLE COATING F BOEING MILITARY
BSS7348 RATE TESTING PROCEDURE FOR CHEMICAL REMOVAL OF METAL A BOEING MILITARY
BSS7413 NON-DESTRUCTIVE THICKNESS MEASUREMENT OF NON-CONDUCTIVE COAT ORG BOEING MILITARY
BSS7600 PERSONNEL CERTIFICATION, GENERAL REQUIREMENT PSD6-12 BOEING MILITARY
BSS7617 ELECTRICAL BONDING AND GROUNDING, EMPLOYEE CERTIFICATION FOR R BOEING MILITARY
BSS7617 ELECTRICAL BONDING AND GROUNDING, EMPLOYEE CERTIFICATION FOR SSD6-6 BOEING MILITARY
BSS7630 SHOT PEENING OPERATIONS PERSONNEL CERTIFICATION FOR G BOEING MILITARY
BSS7630 SHOT PEENING OPERATIONS PERSONNEL CERTIFICATION FOR PSD 6-3 BOEING MILITARY
BSS7669 ASSEMBLY OF COAXIAL AND QUAD CONNECTORS AND CONTACTS, EMPLOY K BOEING MILITARY
BSS7698 NONDESTRUCTIVE INSPECTION, PERSONNEL CERTIFICATION FOR H BOEING MILITARY
D33101-16 ASSORTED PINS, CLAMPS, LOCATORS AND ACCESSORIES (UT-7040 THR BR BOEING MILITARY
D33181-14B GRIT STRIPS FOR LM’S TO STABILIZE NON-METALLIC HONEYCOMB BR BOEING MILITARY
D33200-2 SELLER-OWNED TOOLING REQUIREMENTS AA BOEING MILITARY
D6-56202 Tooling Supplier Quality Operating Requirements U BOEING MILITARY
D6-82402 DEFINE PRODUCTS DISTRIBUTED TO SUPPLIERS AM BOEING MILITARY
D6-82479 Boeing Quality Management System Requirements for Suppliers I BOEING MILITARY
D950-11059-1 BDS Seller Special Tooling Requirements F BOEING MILITARY
D950-11288-1
PRODUCT DEFINITION TEMPLATE (PDT) REQUIREMENTS, VALIDATION AND VERIFICATION
PROCESSES, AND HANDLING INSTRUCTIONS FOR PLOT CENTERS AND SUPPLIER USE D BOEING MILITARY
DMS 1677 BOEING MATERIAL SPECIFICATION A BOEING MILITARY
DMS1536 TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALE M BOEING MILITARY
DMS1556 PLASTIC SHEET, GLASS FABRIC REINFORCED PHENOLIC, HEAT RESIST F BOEING MILITARY
DMS1557 ADHESIVE, METAL TO METAL, HIGH STRENGTH P BOEING MILITARY
DMS1558 PLASTIC SHEET, GLASS FABRIC REINFORCED PHENOLIC, HEAT RESIST R BOEING MILITARY
DMS1570 MULTI-DMS AMENDMENT C BOEING MILITARY
DMS1583 ANNEALED FORGINGS, TITANIUM ALLOY, 6AL 4V.PD H BOEING MILITARY
DMS1592 TITANIUM ALLOY SHEET, STRIP AND PLATE, 6AL-4V ANNEALED H BOEING MILITARY
DMS1592 TITANIUM ALLOY SHEET, STRIP AND PLATE, 6AL-4V ANNEALED QPL 19 BOEING MILITARY
DMS1721 CASTINGS, ALUMINUM ALLOY, A357.0-T6 J BOEING MILITARY
DMS1745 ADHESIVE A BOEING MILITARY
DMS1834 FORGINGS, ALUMINUM M BOEING MILITARY
DMS1841 STEEL, HY-TUF (SPECIAL AEROSPACE QUALITY) L BOEING MILITARY
DMS1879 TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AI-6 E BOEING MILITARY
DMS1880 ADHESIVE, AIR DRYING, TWO-PART, SILICONE RUBBER D BOEING MILITARY
DMS1881 FORGINGS, TITANIUM H BOEING MILITARY
DMS1926 EPOXY RESIN, B STAGE CLOTH REINFORCED P BOEING MILITARY
DMS1935 STEEL, 300M (VACUUM MELTED) E BOEING MILITARY
DMS1957 INTEGRAL SKIN FLEXIBLE URETHANE FOAM L BOEING MILITARY
DMS1968 TAPE, COATED CLOTH, PRESSURE SENSITIVE E BOEING MILITARY
DMS1974 CORE MATERIAL: AROMATIC POLYAMIDE PAPER/PHENOLIC RESIN W BOEING MILITARY
DMS1980 SILICONE, CELLULAR G BOEING MILITARY
DMS2013 SEALANT, FAYING SURFACE, WITH EXTENDED APPLICATION TIMES H BOEING MILITARY
DMS2082 SEALING COMPOUND, INTEGRAL FUEL TANKS & FUEL CELL CAVITIES E BOEING MILITARY
DMS2082 030-MC MULTI-DMS AMENDMENT A BOEING MILITARY
DMS2082QPL SEALING COMPOUND, INTEGRAL FUEL TANKS & FUEL CELL CAVITIES A BOEING MILITARY
DMS2084 CLOTH, GLASS, COATED ELASTOMER C BOEING MILITARY
DMS2094 HONEYCOMB CORE: FIBERGLASS REINFORCED PLASTIC D BOEING MILITARY
DMS2100 STEEL, CORROSION RESISTANT, PH 13-8MO G BOEING MILITARY
DMS2115 COATING, POLYURETHANE G BOEING MILITARY
DMS2142 TUBING, WIRE MARKER E BOEING MILITARY
DMS2150 CORROSION INHIBITING COMPOUND, SOFT FILM, WATER DISPLACING B BOEING MILITARY
DMS2153 COMPONENT ID LABELS- PRESSURE SENSITIVE ADHESIVE F BOEING MILITARY
DMS2169 ADHESIVE, MODIFIED EPOXY, ENVIRONMENTAL RESISTANT QPL 14 BOEING MILITARY
DMS2177 ADHESIVE SYSTEM – 250 DEG F SERVICE APPLICATION J BOEING MILITARY
DMS2180 FOAMING ADHESIVE, CORE SPLICING AND CORE TO INTEGRAL MEMBER J BOEING MILITARY
DMS2182 ARAMID FABRIC MATERIAL, HIGH STRENGTH/MODULUS EPOXY RESIN IM B BOEING MILITARY
DMS2200 ADHESIVE, 350 DEGREES F (177 DEGREES C) CURE, MULTIPURPOSE G BOEING MILITARY
DMS2201 PROCUREMENT FROM FOREIGN SOURCES- METALLIC RAW MATERIALS H BOEING MILITARY
DMS2212 GLASS FIBER CLOTH, EPOXY RESIN IMPREGNATED (DMS 2224 COMPATI F BOEING MILITARY
DMS2221 ELASTOMER, SILICONE C BOEING MILITARY
DMS2223 WEBBING, TEXTILE, NYLON C BOEING MILITARY
DMS2223 WEBBING, TEXTILE, NYLON QPL 3 BOEING MILITARY
DMS2224 CARBON EPOXY PREPREG – IMPACT RESISTANT P BOEING MILITARY
DMS2227 EXTRUSIONS, ALUMINUM ALLOY, 7050 J BOEING MILITARY
DMS2233 PLATE, ALUMINUM ALLOY, 7050 G BOEING MILITARY
DMS2233 PLATE, ALUMINUM ALLOY, 7050 QPL 21 BOEING MILITARY
DMS2234 ALUMINUM ALLOY, SHEET, CLAD, 7475 A BOEING MILITARY
DMS2237 98-009A MULTI-DMS AMENDMENT BOEING MILITARY
DMS2240 MILDING, INJECTION, HIGH TEMPERATURE THERMOPLASTIC K BOEING MILITARY
DMS2278 FOAM, RIGID, CLOSED CELL, POLYMETHACRYLIMIDE C BOEING MILITARY
DMS2288 FIBER REINFORCED EPOXY PREPREG, 250F CURE K BOEING MILITARY
DMS2296 MODIFIED PHENOLIC GLASS CLOTH, “B” STAGE PREPREG, LOW HEAT R C BOEING MILITARY
DMS2297 PHENOLIC GLASS FABRIC, “B” STAGE LAMINATING, LOW HEAT RELEAS D BOEING MILITARY
DMS2302 SHIELDING, EXPANDED FOIL C BOEING MILITARY
DMS2307 CASTINGS, ALUMINUM ALLOY D357.0-T6 E BOEING MILITARY
DMS2310 ROTO-MOLDED NYLON E BOEING MILITARY
DMS2310 ROTO-MOLDED NYLON QPL 10 BOEING MILITARY
DMS2368 ADHESIVE, MODIFIED PHENOLIC, LOW HEAT RELEASE NEW BOEING MILITARY
DMS2378 TAPE, CLOSURE, HOOK AND LOOP, STAINLESS STEEL A BOEING MILITARY
DMS2380 TUBING, HEAT SHRINKABLE, FLEXIBLE, IRRADIATED POLYEFIN D BOEING MILITARY
DMS2433 COATING, EPOXY TOPCOAT, FLUID RESISTANT B BOEING MILITARY
DMS2438 FIBER REINFORCED BISMALEIMIDE PREPREG, 450F (232C) RESISTANT A R-2 BOEING MILITARY
DMS2441 SELF SEALING FIBER REINFORCED MODIFIED PHENOLIC PREPREG, HIG D BOEING MILITARY
DMS2442 TITANIUM INGOT E BOEING MILITARY
DMS2453 WIRE ROPE, AIRCRAFT, NYLON JACKETED AND TIN-OVER-ZINC COATED C BOEING MILITARY
DMS2459 PLATE, ALUMINUM ALLOY, 7050-T7451, FATIGUE QUALIFIED D BOEING MILITARY
DMS2485 RAIN EROSION AND IMPACT PROTECTION TAPE H BOEING MILITARY
DMSL2200 ADHESIVE, 350F (177C) CURE, MULTIPURPOSE QPL 11 BOEING MILITARY
DPM INDEX DPM INDEX FEBRUARY 1 2014 BOEING MILITARY
DPS1.001 INDEX OF SUPPLEMENTAL DPS’S J BOEING MILITARY
DPS1.04-15 PLASTIC LAMINATES, GENERAL PROCESSING M BOEING MILITARY
DPS1.05 HARDNESS TESTING OF METALS AC BOEING MILITARY
DPS1.05-1 HARDNESS TESTING EQUIPMENT & PERSONNEL R BOEING MILITARY
DPS1.05-2 HARDNESS TESTING PROCEDURES J BOEING MILITARY
DPS1.05-3 HARDNESS VALUES FOR ALLUMINUM ALLOYS AV BOEING MILITARY
DPS1.05-5 HARDNESS VALUES FOR STAINLESS STEEL,COPPER AND NICKEL ALLOYS AE BOEING MILITARY
DPS1.05-7 STATISTICAL SAMPLING FOR HARDNESS INSPECTION W BOEING MILITARY
DPS1.07-39 CEMENTING LAMINATED PLASTICS AD BOEING MILITARY
DPS1.07-49 CEMENTING SILICONE & FLOUROSILICONE RUBBERS V BOEING MILITARY
DPS1.088-17 FABRICATING INTERIOR NONACOUSTICAL PANELS, LOW HEAT RELEASE K BOEING MILITARY
DPS1.098 INSTALLATION OF RAIN EROSION AND IMPACT PROTECTION TAPES H BOEING MILITARY
DPS1.37 ELECTRICAL BONDING CONNECTIONS – MILITARY AE BOEING MILITARY
DPS1.624 AUTOCLAVE PROCESSING OFADVANCED COMPOSITE PREPEG V BOEING MILITARY
DPS1.624-1 BLEED PROCESS – DMS 2224 PREPREG B BOEING MILITARY
DPS1.624-2 NO-BLEED PROCESS -350 F CURING PREPREG F BOEING MILITARY
DPS1.834-12 ELECTRICAL IDENTIFICATION & SHOP PRACTICES – COMMERCIAL AC BOEING MILITARY
DPS1.834-13.2 CONNECTORS, COAZIAL CABLE – COMMERCIAL U BOEING MILITARY
DPS1.834-3.1 ELECTRICAL CONNECTORS – GENERAL REQUIREMENTS – COMMERCIAL BU BOEING MILITARY
DPS1.834-3.17 MISCELLANEOUS ELECTRICAL CONNECTORS – COMMERCIAL AJ BOEING MILITARY
DPS1.834-30.1 HEAT SHRINKABLE TUBING-COMMERCIAL D BOEING MILITARY
DPS1.834-40.3 DPS1.834-40.3 REV BL, ELECTRICAL TOOL CODES-COMMERCIAL BL BOEING MILITARY
DPS1.834-7 FABRICATING AND INSTALLING WIRE HARNESSES – COMMERCIAL DF BOEING MILITARY
DPS1.901 EDGE FILLING & POTTING OF ASSEMBLIES Y BOEING MILITARY
DPS1.902 INSERTS IN SANDWICH & OPEN PANELS, POTTED AM BOEING MILITARY
DPS1.902-3 INSTALLATION OF ADHESIVE BONDED INSERTS R BOEING MILITARY
DPS1.950 METAL ADNESIVE BONDING AR BOEING MILITARY
DPS1.960 ADHESIVE BONDING OF COMPOSITE STRUCTURE R BOEING MILITARY
DPS1.960 ADHESIVE BONDING OF COMPOSITE STRUCTURE C17-438 BOEING MILITARY
DPS1.99-31.17 FABRICATION OF 350 DEGREES F (177 DEGREES C) SERVICE SANDWIC D BOEING MILITARY
DPS10.921 SUPERPLASTIC FORMING TITANIUM C BOEING MILITARY
DPS11.01 CHROMIC ACID ANODIZING ALUMINUM AR BOEING MILITARY
DPS11.05 SURFURIC ACID ANODIZING T ADDENDUM 12 BOEING MILITARY
DPS11.05-2 SULFURIC ACID ANODIZING – THIN FILM F BOEING MILITARY
DPS11.06 COLOR ANODIZING DECORATIVE PARTS K BOEING MILITARY
DPS11.08 PHOSPHORIC ACID ANODIZING OF ALUMINUM P BOEING MILITARY
DPS2.50 SEALING-MATERIALS AND METHODS BG BOEING MILITARY
DPS2.50-17.1 SEALING TAPE – MATERIALS AND METHODS OF APPLICATION – MILITA E BOEING MILITARY
DPS2.590-2 SEALING, PRESSURE – DC-9/MD-90/717 SERIES AIRPLANES BR BOEING MILITARY
DPS2.590-4 SEALING, SAFETY & CORROSION-DC-9/80/717 SERIES AIRPLANES FE BOEING MILITARY
DPS2.70-2 ASSEMBLY SHOP PRACTICE DE BOEING MILITARY
DPS2.70-2-17 ASSEMBLY SHOP PRACTICE – MILITARY AIRCRAFT AD BOEING MILITARY
DPS3.02-17 IDENTIFICATION OF PARTS AND ASSEMBLIES-MILITARY R BOEING MILITARY
DPS3.027 IDENTIFICATION NONPRODUCTION PARTS D BOEING MILITARY
DPS3.17-49 LUBRICATION OF DC-9, MD-80, MD-90 & 717 AIRCRAFT AR BOEING MILITARY
DPS3.17-51 LUBRICATION OF DC-10, KC-10 AND MD-11 AIRCRAFT AH BOEING MILITARY
DPS3.177 SOLID FILM LUBRICANTS M BOEING MILITARY
DPS3.27-1 MARKING METHODS AND MATERIALS, INK STAMPING U BOEING MILITARY
DPS3.317 PRESERVATION AND PROTECTION OF MACHINED PARTS P BOEING MILITARY
DPS3.54 IDENTIFICATION MARKING OF RAW STOCK METALS K BOEING MILITARY
DPS3.57 RUBBER IDENTIFICATION & PACKAGING T BOEING MILITARY
DPS3.576 AGE CONTROL OF RUBBER AH BOEING MILITARY
DPS3.58-3912757 WING ACCESS DOOR ASSEMBLY A BOEING MILITARY
DPS3.67-17 INSTALLATION OF PULL STEM BLIND RIVETS Y BOEING MILITARY
DPS3.67-22.1 HOLE PREPARATION AND TRIMMING – GRAPHITE EPOXY COMPOSITES G BOEING MILITARY
DPS3.67-44 FLUSH MOUNTED PANEL FASTNERS & INSERTS J BOEING MILITARY
DPS3.67-62.1 INSTALLATION OF FTI RIVETLESS NUTPLATES H BOEING MILITARY
DPS3.67-66 INSTALLATION OF 2ASP (3DO2(XX)) FASTENER F BOEING MILITARY
DPS3.67-71 INSTALLATION OF NAS93XX SERIES BLIND RIVETS (CHERRYMAX, AND C BOEING MILITARY
DPS3.67-74 SPLIT SLEEVE COLD WORKING – HOLES AND COUNTERSINKS G BOEING MILITARY
DPS3.69 FORMING ALUMINUM- GENERAL E BOEING MILITARY
DPS3.69-1 STRETCH STRAIGHTENING OF ROLLED SECTIONS A BOEING MILITARY
DPS3.69-10 FORMING OF 6000 SERIES ALUMINUM ALLOYS C BOEING MILITARY
DPS3.69-4 FORMING OF 7000 SERIES ALUMINUM ALLOYS AP BOEING MILITARY
DPS3.69-5 FORMING OF 2000 SERIES ALUMINUM ALLOYS & DMS2249 V BOEING MILITARY
DPS3.80-5 FLUID PIPING AND FITTINGS – FABRICATION AK BOEING MILITARY
DPS3.809 INTERNALLY SWAGED 7D0197 AND 7D0259 FERRULES AND THE INSTALL T BOEING MILITARY
DPS4.40-2 NAMEPLATE FABRICATION J BOEING MILITARY
DPS4.50-66 DOUGLAS PROCESS STANDARD L BOEING MILITARY
DPS4.50-138 EPOXY PRIMER, DMS2104 AB BOEING MILITARY
DPS4.50-138 EPOXY PRIMER, DMS2104 PSD C17-533 – BOEING MILITARY
DPS4.50-160 COATING, NONSKID-FLUID RESISTANT G BOEING MILITARY
DPS4.50-160 COATING, NONSKID- FLUID RESISTANT G BOEING MILITARY
DPS4.50-33 PRETREATMENT COATING J BOEING MILITARY
DPS4.50-36 EPOXY (FR) COATING SYSTEM 05-003 BOEING MILITARY
DPS4.50-36-17 EPOXY (FR) COATING SYSTEM B BOEING MILITARY
DPS4.50-62 IMPACT RESISTANT COATING SYSTEM AN R-1 BOEING MILITARY
DPS4.507 ROLLED THREADS AND FILLETS – GENERAL T BOEING MILITARY
DPS4.514 USE OF TEMPERATURE INDICATING MATERIALS C BOEING MILITARY
DPS4.601 METAL GRINDING P BOEING MILITARY
DPS4.704 MAGNETIC PARTICLE INSPECTION AY BOEING MILITARY
DPS4.706 INSPECTION REQUIREMENTS FOR CASTINGS M BOEING MILITARY
DPS4.707 PENETRANT INSP (FLUORESCENT) BB BOEING MILITARY
DPS4.707-1 PENETRANT INSPECTION – VISIBLE DYE L BOEING MILITARY
DPS4.710 MINIMUM FABRICATION PRACTICES FOR METALS M BOEING MILITARY
DPS4.710-1 EDGE CONDITION REQUIREMENTS K BOEING MILITARY
DPS4.710-2 SHEET METAL FABRICATION PRACTICES L BOEING MILITARY
DPS4.710-3 GENERAL FABRICATION PRACTICES – COMMERCIAL AK BOEING MILITARY
DPS4.710-3-17 GENERAL FABRICATION PRACTICES F BOEING MILITARY
DPS4.713 ULTRASONIC INSPECTION – WROUGHT METALS AK BOEING MILITARY
DPS4.713 ULTRASONIC INSPECTION – WROUGHT METALS C17-124 BOEING MILITARY
DPS4.738-1 NONDESTRUCTIVE INSPECTION ACCEPTANCE CRITERIA FOR COMPOSITE F BOEING MILITARY
DPS4.747 NONDESTRUCTIVE TESTING PROCEDURE APPROVAL G BOEING MILITARY
DPS4.804 FABRICATION OF HIGH STRENGTH LOW ALLOY STEEL AC BOEING MILITARY
DPS4.903 OXYGEN, LIQUID L BOEING MILITARY
DPS4.998 ABRASIVE BLAST FINISHING ALUMINUM PARTS C BOEING MILITARY
DPS4.999 SHOT PEENING OF METAL PARTS W BOEING MILITARY
DPS5.00-1 STEEL HEAT TREATMENT-QUENCH AND TEMPER HARDENABLE AU BOEING MILITARY
DPS5.00-2 STEEL HEAT TREATMENT – PRECIPITATION HARDENABLE AR BOEING MILITARY
DPS5.00-7 STEEL HEAT TREATMENT-STAINLESS STRAINLESS STRAIN HARDENABLE E BOEING MILITARY
DPS7.00-1 ALUMINUM HEAT TREATMENT PROCEDURES BL BOEING MILITARY
DPS7.00-1-17 ALUMINUM HEAT TREATMENT PROCEDURES K DEV BOEING MILITARY
DPS7.00-1-17 ALUMINUM HEAT TREATMENT PROCEDURES N BOEING MILITARY
DPS9.07 SURFACE TREATMENT OF CORROSION RESISTANT STEELS AM BOEING MILITARY
DPS9.29 SURFACE TREATMENT OF TITANIUM AR BOEING MILITARY
DPS9.312 CLEANING AND DEOXIDIZING AIRCRAFT EXTERIOR SURFACES V BOEING MILITARY
DPS9.316 STRIPPING OF ORGANIC COATINGS AJ BOEING MILITARY
DPS9.45 CONVERSION COATINGS FOR ALUMINUM AW BOEING MILITARY
DPS9.483 CHEMICAL MILLING TITANIUM ALLOYS AA BOEING MILITARY
DPS9.76-1 SULFAMATE NICKEL PLATING T BOEING MILITARY
DPS9.84 THIN DENSE CHROMIUM PLATE L BOEING MILITARY
DPS9.85 PLASMA ARC SPRAYING H BOEING MILITARY
DPS9.89 DPS9.89 REV P BRUSH PLATING P BOEING MILITARY
DPS9.98 DETONATION GUN DEPOSITED COATINGS D BOEING MILITARY
DPS9.99 HIGH VELOCITY OXYFUEL (HVOF) DEPOSITED COATINGS C BOEING MILITARY
DQS1.6-1 LIMITED LIFE, INSTALLED EQUIPMENT ITEMS – COMMERCIAL AIRCRAF AK BOEING MILITARY
DQS4.2-17 GENERAL CONTOUR WAVINESS AND MISMATCH C-17 QUALITY STANDARDS M BOEING MILITARY
DQSCN13 GENERAL CONTOUR WAVINESS AND MISMATCH QUALITY STANDARDS C-17 NEW BOEING MILITARY
DQSCN14 GENERAL CONTOUR WAVINESS AND MISMATCH QUALITY STANDARDS C-17 NEW BOEING MILITARY
GEN1111 STANDARD REPAIR PROCEDURES REFERENCE INFORMATION L BOEING MILITARY
GEN1130 STANDARD REPAIR PROCEDURES REFERENCE INFORMATION F-15 E BOEING MILITARY
GVA100012978 74A122650 LWR SKIN SUPPLIER PRIMER RQMTS A BOEING MILITARY
K6M3 FITTING END – 60 DEGREE INTERNAL CONE, MALE, METRIC DIMENSIN B BOEING MILITARY
K9M4 CLAMP, LOOP STYLE, CUSHIONED, METRIC, SPECIAL D BOEING MILITARY
MCS5900 CONSUMABLE MATERIAL SPECIFICATION FOR COMPOSITE FABRICATION AG BOEING MILITARY
MCS5900.1 CONSUMABLE MATERIAL SPECIFICATION FOR COMPOSITE FABRICATION BE* BOEING MILITARY
MCS5900.4 CONSUMABLE MATERIAL SPECIFICATION FOR PREPREG BACKING RELEASE MATERIALS – CYTEC NEW BOEING MILITARY
MCS5900.5 CONSUMABLE MATERIAL SPECIFICATION FOR PREPREG BACKING RELEASE MATERIALS – HENKEL NEW BOEING MILITARY
MCS5900.6 CONSUMABLE MATERIAL SPECIFICATION FOR PREPREG BACKING RELEASE MATERIALS – HEXCEL NEW BOEING MILITARY
MCS5901 CONSUMABLE MATERIAL SPECIFICATION FOR COMPOSITE FABRICATION A BOEING MILITARY
MCS5901.1 CONSUMABLE MATERIAL REQUIREMENTS, PEEL PLY MATERIALS BOEING MILITARY
MCS5901.10 CONSUMABLE MATERIAL REQUIREMENTS, BARRIER/HAND CREAMS BOEING MILITARY
MCS5901.11 CONSUMABLE MATERIAL REQUIREMENTS, PREPREG BACKING RELEASE MA BOEING MILITARY
MCS5901.13 CONSUMABLE MATERIAL REQUIREMENTS, SILICON RUBBER SHEET A BOEING MILITARY
MCS5901.14 CONSUMABLE MATERIAL REQUIREMENTS, CORK/RUBBER DAM MATERIAL BOEING MILITARY
MCS5901.15 CONSUMABLE MATERIAL REQUIREMENTS, MOLD RELEASE A BOEING MILITARY
MCS5901.16 CONSUMABLE MATERIAL REQUIREMENTS, COTTON CLOTH WIPERS AND PA BOEING MILITARY
MCS5901.18 CONSUMABLE MATERIAL REQUIREMENTS, VERIFILM BOEING MILITARY
MCS5901.19 CONSUMABLE MATERIAL REQUIREMENTS, APRONS/SLEEVES/SHOP COATS BOEING MILITARY
MCS5901.2 CONSUMABLE MATERIAL REQUIREMENTS, FIBERGLASS BREATHER/BLEEDE BOEING MILITARY
MCS5901.5 CONSUMABLE MATERIAL REQUIREMENTS, RELEASE FILMS BOEING MILITARY
MCS5901.6 CONSUMABLE MATERIAL REQUIREMENTS, NYLON VACUUM BAG FILMS BOEING MILITARY
MCS5901.7 CONSUMABLE MATERIAL REQUIREMENTS, PRESSURE SENSITIVE TAPES BOEING MILITARY
MCS5901.8 CONSUMABLE MATERIAL REQUIREMENTS, VACUUM BAG SEALANT TAPE BOEING MILITARY
MCS5901.9 CONSUMABLE MATERIAL REQUIREMENTS, GLOVES B BOEING MILITARY
MCS6000 CONSUMABLE MATERIAL SPECIFICATION FOR HAND AND IMMERSION CLE M BOEING MILITARY
MCS6000.1 CONSUMABLE MATERIAL SPECIFICATION FOR HAND AND IMMERSION CLE B BOEING MILITARY
MCS6000.2 CONSUMABLE MATERIAL SPECIFICATION FOR HAND AND IMMERSION CLE D BOEING MILITARY
MMS1202 TITANIUM ALLOY EXTRUSIONS, ANNEALED – TI-6AL-6V-2SN (SKIN F M BOEING MILITARY
MMS1202 TITANIUM ALLOY EXTRUSIONS, ANNEALED – TI-6AL-6V-2SN (SKIN F ADDENDUM 1 REV H BOEING MILITARY
MMS1203 TITANIUM SHEET AND PLATE, Ti-6Al-6V-2Sn (MODIFICATION OF AMS4918) L BOEING MILITARY
MMS1203 APPROVED MMS1203 MATERIAL SOURCES ADDENDUM 1 REV E BOEING MILITARY
MMS1205 TITANIUM SEAMLESS TUBING, COLD WORKED AND STRESS RELIEVED, 3 T BOEING MILITARY
MMS1217 TITANIUM INGOT G BOEING MILITARY
MMS1217 APPROVED MMS 1217 MATERIAL SOURCES ADDENDUM 1 REV H BOEING MILITARY
MMS1233 TITANIUM ALLOY FORGINGS, STANDARD GRADE TI-6AL-4V, RECRYSTAL G BOEING MILITARY
MMS1233 APPROVED MMS 1233 MATERIAL SOURCES ADDENDUM 1 L BOEING MILITARY
MMS1236 STRUCTURAL QUALITY D357.0-T6 SAND AND INVESTMENT CASTINGS C BOEING MILITARY
MMS1236 APPROVED MMS1236 MATERIAL SOURCES ADDENDUM 1 BOEING MILITARY
MMS1238 TITANIUM ALLOY SHEET AND PLATE, SINGLE MELT Ti-6Al-4V, MILL ANNEALED NEW BOEING MILITARY
MMS1238 APPROVED MMS 1238 MATERIAL SOURCES NEW ADDENDUM 1 BOEING MILITARY
MMS1420 APPROVED MMS 1420 MATERIAL SOURCES ADDENDUM 1 R BOEING MILITARY
MMS1420 ALUMINUM ALLOY PLATE, 7050-T7451 G BOEING MILITARY
MMS1432 ALUMINUM ALLOY PLATE, 2124 – T851, FATIGUE TESTED G** BOEING MILITARY
MMS1432 APPROVED MMS1432 MATERIAL ADDENDUM 1 K BOEING MILITARY
MMS1438 ALUMINUM ALLOY 7050-T73511/-T74511, EXTRUDED SHAPES AND BARS F BOEING MILITARY
MMS1438 APPROVED MMS1438 MATERIAL SOURCES ADDENDUM 1 D BOEING MILITARY
MMS1439 ALUMINUM ALLOY PLATE, 7050-T7451, FATIGUE TESTED E BOEING MILITARY
MMS1439 APPROVED MMS1439 MATERIAL SOURCE ADDENDUM 1 J BOEING MILITARY
MMS146 ALUMINUM FORGINGS, ALLOY 7050 P BOEING MILITARY
MMS146 APPROVED MMS146 MATERIAL SOURCES (F/A-18) ADDENDUM 1 W BOEING MILITARY
MMS149 APPROVED MMS149 MATERIAL SOURCES ADDENDUM 1 K BOEING MILITARY
MMS149 ALUMINUM ALLOY 2124 PLATE M BOEING MILITARY
MMS159 ALUMINUM ALLOY, PLATE (7075-T73 AND -T7351) T BOEING MILITARY
MMS2404 POWDER, IRON-SILICON ALLOY J BOEING MILITARY
MMS261 TUBING H BOEING MILITARY
MMS261 APPROVED MMS261 MATERIAL SOURCES ADDENDUM 1 E BOEING MILITARY
MMS307 HEAT AND CORROSION RESISTANT STRUCTURAL ADHESIVES H BOEING MILITARY
MMS307 APPROVED MMS307 MATERIAL SOURCES ADDENDUM 1 C BOEING MILITARY
MMS310 FILM ADHESIVE, HIGH TEMPERATURE F BOEING MILITARY
MMS310 FILM ADHESIVE, HIGH TEMPERATURE ADDENDUM 1 C BOEING MILITARY
MMS327 SEALANT, ELECTRICALLY CONDUCTIVE, FORM-IN-PLACE K BOEING MILITARY
MMS327 APPROVED MMS327 MATERIAL RESOURCES ADDENDUM 1 K BOEING MILITARY
MMS332 HIGH TEMPERATURE RESISTANT FUEL TANK FILLETING AND FAY SURFA U BOEING MILITARY
MMS332 APPROVED MMS 332 MATERIAL SOURCES ADDENDUM 1 L* BOEING MILITARY
MMS347 EPOXY SYNTACTIC MATERIALS G BOEING MILITARY
MMS347 APPROVED MMS 347 MATERIAL SOURCES ADDENDUM 1 L BOEING MILITARY
MMS350 STRUCTURAL ADHESIVE SYSTEM, INTERMEDIATE MODULUS, FOR 250 DE L BOEING MILITARY
MMS350 APPROVED MMS350 MATERIAL SOURCES ADDENDUM 1 D BOEING MILITARY
MMS358 APPROVED MMS358 MATERIAL SOURCES ADDENDUM 1 REV G BOEING MILITARY
MMS358 LIQUID SHIM E BOEING MILITARY
MMS370 TRUCTURAL ADHESIVE SYSTEM, 250 DEGREES F CURING D BOEING MILITARY
MMS370 APPROVED MMS 370 MATERIAL SOURCES ADDENDUM 1 REV C BOEING MILITARY
MMS411 ALUMINUM OXIDE, ABRASIVE BLASTING F BOEING MILITARY
MMS411 APPROVED MMS411 MATERIAL SOURCES ADDENDUM 1 H BOEING MILITARY
MMS417 CONDUCTIVE COATING H BOEING MILITARY
MMS417 APPROVED MMS417 MATERIAL SOURCE ADDENDUM 1 F BOEING MILITARY
MMS420 APPROVED MMS420 MATERIAL SOURCES ADDENDUM 1 BD BOEING MILITARY
MMS420 ALIPHATIC POLYURETHANE TOPCOAT R BOEING MILITARY
MMS423 LOW VOC – LOW DENSITY EPOXY PRIMER D BOEING MILITARY
MMS423 APPROVED MMS423 MATERIAL SOURCE ADDENDUM 1 K BOEING MILITARY
MMS439 POLYURETHANE ELASTOMER G BOEING MILITARY
MMS439 APPROVED MMS439 MATERIAL SOURCES ADDENDUM 1 E BOEING MILITARY
MMS440 ELASTOMERIC MATERIAL F BOEING MILITARY
MMS443 ELASTOMERIC MATERIAL, CORROSION RESISTANT F BOEING MILITARY
MMS443 APPROVED MMS443 MATERIAL SOURCES ADDENDUM 1 K BOEING MILITARY
MMS446 CORROSION-RESISTANT ELASTOMERIC SHEET G BOEING MILITARY
MMS446 APPROVED MMS 446 MATERIAL SOURCES ADDENDUM 1 J BOEING MILITARY
MMS5005 COMPOSITE SURFACE SCRIMS, MODERATE TEMPERATURE U BOEING MILITARY
MMS5005 APPROVED MMS5005 MATERIAL SOURCE ADDENDUM 1 P BOEING MILITARY
MMS5024 HIGH STRENGTH CARBON FIBER/TOUGHENED EPOXY UNIDIRCTIONAL PRE D BOEING MILITARY
MMS5024 APPROVED MMS5024 MATERIAL SOURCE ADDENDUM 1 G BOEING MILITARY
MMS5025 HIGH STRENGTH CARBON FIBER/TOUGHENED EPOXY CLOTH PREPREG MAT D BOEING MILITARY
MMS5025 APPROVED MMS5025 MATERIAL SOURCE ADDENDUM 1 E BOEING MILITARY
MMS5026 TOUGHENED EPOXY IMPREGNATED FIBER GLASS CLOTH G BOEING MILITARY
MMS5026 APPROVED MMS5026 MATERIAL SOURCE ADDENDUM 1 F BOEING MILITARY
MMS5027 CARBON FIBER/TOUGHENED EPOXY UNIDIRECTIONAL FIBER PLACEMENT G BOEING MILITARY
MMS5027 APPROVED MMS5027 MATERIAL SOURCE ADDENDUM 1 G BOEING MILITARY
MMS5028 PLASTIC ROTOMOLDING COMPOUND, NYLON H BOEING MILITARY
MMS5028 APPROVED MMS5028 MATERIAL SOURCE ADDENDUM 1 E BOEING MILITARY
MMS5030 BINDERIZED FABRIC E BOEING MILITARY
MMS5030 APPROVED MMS5030 MATERIAL SOURCE ADDENDUM 1 D BOEING MILITARY
MMS5031 RESIN FOR RESIN TRANSFER MOLDING E BOEING MILITARY
MMS5031 APPROVED MMS5031 MATERIAL SOURCE ADDENDUM 1 C BOEING MILITARY
MMS5035 MOLDING COMPOUND, EPOXY RESIN, GLASS FIBER REINFORCED C BOEING MILITARY
MMS5035 APPROVED MMS5035 MATERIAL SOURCES ADDENDUM 1 B BOEING MILITARY
MMS5036 APPROVED MMS5036 MATERIAL SOURCES ADDENDUM 1 D BOEING MILITARY
MMS5047 CARBON AND GLASS FIBER BISMALEIMIDE PREPREGS A BOEING MILITARY
MMS5047 APPROVED MMS5047 MATERIAL SOURCES ADDENDUM 1 A BOEING MILITARY
MMS5049 CARBON FIBER PLAIN WEAVE FABRIC REINFORCED TOUGHENED EPOXY P A BOEING MILITARY
MMS5049 APPROVED MMS5049 MATERIAL SOURCES ADDENDUM 1 B BOEING MILITARY
MMS5064 HIGH STRENGTH CARBON FIBER REINFORCED TOUGHENED EPOXY FABRIC C BOEING MILITARY
MMS5067 APPROVED MMS5067 MATERIAL SOURCES ADDENDUM 1 A BOEING MILITARY
MMS5068 APPROVED MMS5068 MATERIAL SOURCES ADDENDUM 1 B BOEING MILITARY
MMS519 INTERMEDIATE MODULUS CARBON FIBER/TOUGHENED EPOXY UNIDIRECTI E BOEING MILITARY
MMS519 APPROVED MMS519 MATERIAL SOURCES ADDENDUM 1 F BOEING MILITARY
MMS525 ARAMID FIBER CLOTH PREPREG K BOEING MILITARY
MMS525 APPROVED MMS525 MATERIAL SOURCES ADDENDUM 1 M BOEING MILITARY
MMS527 CLOTH, GLASS, 104E, DRY A1100 SOFT FINISH E BOEING MILITARY
MMS528 ARAMID FIBER/EPOXY CLOTH PREPREG F BOEING MILITARY
MMS528 APPROVED MMS528 MATERIAL SOURCES ADDENDUM 1 C BOEING MILITARY
MMS529 EPOXY IMPREGNATED FIBER GLASS CLOTH K BOEING MILITARY
MMS529 APPROVED MMS529 MATERIAL SOURCES ADDENDUM 1 E BOEING MILITARY
MMS533 FIBER GLASS BISMALEIMIDE PREPREG, CORROSION BARRIER G BOEING MILITARY
MMS533 APPROVED MMS533 MATERIAL SOURCES ADDENDUM 1 D BOEING MILITARY
MMS534 CARBON FIBER BISMALEIMIDE CLOTH PREPREG J BOEING MILITARY
MMS534 APPROVED MMS534 MATERIAL SOURCES ADDENDUM 1 D BOEING MILITARY
MMS538 PLASTIC MOLDING COMPOUND, EPOXY RESIN, CARBON FIBER REINFORC F BOEING MILITARY
MMS538 APPROVED MMS538 MATERIAL SOURCES ADDENDUM 1 E BOEING MILITARY
MMS544 CARBON/EPOXY PREPREG CLOTH K BOEING MILITARY
MMS544 APPROVED MMS544 MATERIAL SOURCES ADDENDUM 1 T BOEING MILITARY
MMS545 BORON EPOXY PREPREG MATERIAL M BOEING MILITARY
MMS545 APPROVED MMS545 MATERIAL SOURCES ADDENDUM 1 M BOEING MILITARY
MMS549 MODERATE TEMPERATURE, HIGH STRENGTH CARBON/EPOXY PREPREG MAT L BOEING MILITARY
MMS549 APPROVED MMS549 MATERIAL SOURCES ADDENDUM 1 N BOEING MILITARY
MMS582 INSULATION BLANKET, MEDIUM AND HIGH TEMPERATURE D BOEING MILITARY
MMS601 ARGON, WELDING, LIQUID AND GAS L BOEING MILITARY
MMS657 GREASE, WIDE TEMPERATURE RANGE LITHUM OR LITHIUM COMPLEX THI A BOEING MILITARY
MMS657 APPROVED MMS657 MATERIAL SOURCES ADDENDUM 1 A BOEING MILITARY
MMS701 CORE MATERIAL K BOEING MILITARY
MMS701 APPROVED MMS701 MATERIAL SOURCES ADDENDUM 1 G BOEING MILITARY
MMS704 CORE MATERIAL, ALUMINUM HONEYCOMB, FLEXIBLE, CORROSION RESIS F BOEING MILITARY
MMS704 APPROVED MMS704 MATERIAL SOURCES ADDENDUM 1 C BOEING MILITARY
MMS714 CORE MATERIAL, CORROSION RESISTANT ALUMINUM HONEYCOMB, 5056 F BOEING MILITARY
MMS714 APPROVED MMS714 MATERIAL SOURCES ADDENDUM 1 N BOEING MILITARY
MMS727 SYNTACTIC CORE E BOEING MILITARY
MMS727 APPROVED MMS727 MATERIAL SOURCES ADDENDUM 1 B BOEING MILITARY
MMS728 CORE MATERIAL, PHOSPHORIC ACID ANODIZED ALUMINUM HONEYCOMB, B BOEING MILITARY
MMS728 APPROVED MMS728 MATERIAL SOURCES ADDENDUM 1 B BOEING MILITARY
MMS819 SLEEVING, ELECTRICAL INSULATING/WATERPROOFING, DUAL WALL FLU D BOEING MILITARY
MMS819 APPROVED MMS819 MATERIAL SOURCES ADDENDUM 1 C BOEING MILITARY
MMS833 APPROVED MMS833 MATERIAL SOURCES ADDENDUM 1 H BOEING MILITARY
MMS833 YARN; BRAIDING, ELECTRICAL HARNESS JACKET L BOEING MILITARY
MMS901 NAMEPLATES, ALUMINUM FOIL, ADHESIVE BACKED J BOEING MILITARY
MMS901 APPROVED MMS901 MATERIAL SOURCES ADDENDUM 1 L BOEING MILITARY
MS27751 MS27751 BOEING ST. LOUIS SUPPLEMENT FOR A BOEING MILITARY
PS10000 MATERIAL AND PROCESS SPECIFICATION CONTROL AD BOEING MILITARY
PS10010 TRAINING AND CERTIFICATION REQUIREMENTS J* BOEING MILITARY
PS11001 CEMENTING OF RUBBER, PLASTICS, FABRICS, AND FOAMS AG BOEING MILITARY
PS11002 NAMEPLATES, ADHESIVE BONDED IN PLACE, APPLICATION OF T BOEING MILITARY
PS11002.1 NAMEPLATES, METAL, EXTERIOR; APPLICATION OF P BOEING MILITARY
PS11006 CEMENTING OF SILICONE AND FLUOROSILICONE RUBBER AA BOEING MILITARY
PS11007 CEMENTING OF NYLON N BOEING MILITARY
PS11008 BONDING WITH ELASTOMERIC RTV ADHESIVES N BOEING MILITARY
PS11010 CEMENTING SILICONE AND FLUOROSILICONE RUBBER K BOEING MILITARY
PS11015 CEMENTING METAL L BOEING MILITARY
PS11016 CEMENTING LAMINATED PLASTICS (DPS 1.07-39) K BOEING MILITARY
PS11020 LIQUID SHIMMING OF ASSEMBLIES AC BOEING MILITARY
PS11200 MIXING, FREEZING, STORAGE AND THAWING OF SEALANT AND ADHESIV Y* BOEING MILITARY
PS11201 SEALING, FUME AND FOREIGN OBJECT DAMAGE U BOEING MILITARY
PS11205 SEAL, DOOR, FORM-IN-PLACE, FABRICATION OF BD BOEING MILITARY
PS11205.2 FABRICATION OF CONDUCTIVE, FORM-IN-PLACE DOOR SEALS AH BOEING MILITARY
PS11215 APPLICATION OF AMS-S-8802 SEALING COMPOUNDS M BOEING MILITARY
PS11217 SEALING METHODS, AIRCRAFT BG BOEING MILITARY
PS11217.6 F/A-18 E/F OUTER MOLDLINE SEALING K BOEING MILITARY
PS11242 TOLERANCE REQUIREMENTS FOR BOND DETAILS E BOEING MILITARY
PS11270 SEALING METHODS, (C-17 AIRCRAFT) – INACTIVE BD BOEING MILITARY
PS11308 BONDING WITH EPOXY ADHESIVES AB BOEING MILITARY
PS11339 ADHESIVE TAPE – PRESSURE SENSITIVE (DPS 1.09 G BOEING MILITARY
PS11344 SEALING METHODS AH BOEING MILITARY
PS11345 SEALING AND LEAK TESTING OF ADHESIVE BONDED R BOEING MILITARY
PS12010 CLEANING, SOLVENT, HAND OR IMMERSION V BOEING MILITARY
PS12011 CLEANING, AQUEOUS, HAND OR IMMERSION J BOEING MILITARY
PS12020 CLEANING, SOLVENT VAPOR DEGREASING AD BOEING MILITARY
PS12024 CLEANING, AQUEOUS IMMERSION DEGREASING K BOEING MILITARY
PS12030 CLEANING, ALKALINE AC BOEING MILITARY
PS12035 CLEANING OF ALUMINUM DETAIL PARTS FOR ADHESI AB BOEING MILITARY
PS12037 CLEANING OF TITANIUM DETAIL PARTS FOR ADHESI N BOEING MILITARY
PS12037 CLEANING OF TITANIUM DETAIL PARTS N DEVIATION 1 BOEING MILITARY
PS12040 CLEANING, ABRASIVE AE BOEING MILITARY
PS12045 CLEANING, LIQUID HONE M BOEING MILITARY
PS12050 PICKLING W BOEING MILITARY
PS12050.1 PICKLING ALUMINUM ALLOYS AD BOEING MILITARY
PS12050.10 CANCELLATION / SUPERSEDENCE NOTICE FOR PS 12050.10 – PICKLING TITANIUM N BOEING MILITARY
PS12050.2 PICKLING COPPER AND BRASS ALLOYS E BOEING MILITARY
PS12050.4 PICKLING NICKEL AND COBALT BASE ALLOYS (EX F BOEING MILITARY
PS12050.5 PICKLING STAINLESS STEEL K BOEING MILITARY
PS12050.6 PICKLING TITANIUM AND TITANIUM ALLOYS (EXP R BOEING MILITARY
PS12050.8 PICKLING LOW ALLOY STEELS F BOEING MILITARY
PS12050.9 PICKLING BERYLLIUM E BOEING MILITARY
PS12090 CLEANING – REMOVAL OF IDENTIFICATION INKS AN G BOEING MILITARY
PS12100 STRIPPING ORGANIC COATINGS; BRUSH OR SPRAY A N BOEING MILITARY
PS12117 STRIPPING OF ORGANIC COATINGS FROM FA 18 AND EA 18G NEW BOEING MILITARY
PS12305
INACTIVE NOTICE FOR PS12305- PARTS AND ASSEMBLIES, FLUID CARRYING, CAPPING FOR
(DPS1.14) G BOEING MILITARY
PS13001 PASSIVATION OF CORROSION AND HEAT RESISTING U BOEING MILITARY
PS13025 PLATING, TIN ELECTRO H BOEING MILITARY
PS13101 PLATING, CADMIUM ELECTRO SUPPLEMENT 3 DAC CO W BOEING MILITARY
PS13102 PLATING, CHROMIUM ELECTRO R BOEING MILITARY
PS13105 PLATING, ELECTROLESS NICKEL (EXPORT CONTROL K BOEING MILITARY
PS13143 ALUMINUM, ION VAPOR DEPOSITION (IVD) OF Y BOEING MILITARY
PS13144 PLATING, LOW EMBRITTLEMENT CADMIUM, ELECTRO K BOEING MILITARY
PS13155 COATING, PROTECTION OF STEEL AND TITANIUM DURI G BOEING MILITARY
PS13201 ANODIZING, ALUMINUM ALLOYS AN BOEING MILITARY
PS13202 COATING, COLORLESS CHEMICAL SURFACE TREATMENT R BOEING MILITARY
PS13204 CONVERSION COATING, BRUSH AND SPRAY AM BOEING MILITARY
PS13209 COATING, MULTICOLORED CHEMICAL CONVERSION OF W BOEING MILITARY
PS13222 COATING, CHEMICAL CONVERSION OF ALUMINUM ALLOY J BOEING MILITARY
PS13225 BRUSH ANODIZING ALUMINUM ALLOYS C BOEING MILITARY
PS13225.1 BRUSH ANODIZE REPAIR OF SCRATCHES AND BLEN E BOEING MILITARY
PS13234 COATING, FIRE BARRIER, MMS 455 APP OF H BOEING MILITARY
PS13300 GENERAL PAINTING METHODS AND TECHNIQUES R BOEING MILITARY
PS13327 ENAMELS, HEAT RESISTANT; APPLICATION OF N BOEING MILITARY
PS13336 PREPARATION AND APP OF SILK SCREEN ENAMEL L BOEING MILITARY
PS13357 PREP AND APP OF SANDING SURFACER P BOEING MILITARY
PS13375 APPLICATION OF EPOXY PRIMER AE BOEING MILITARY
PS13457
INACTIVE NOTICE FOR PS13457 – PLASTIC PREPARATION FOR FILLERS OR FINISHES, FOR
DOUGLAS COMMERCIAL AIRCRAFT E BOEING MILITARY
PS13500 APPLICATION OF EROSION RESISTANT COATINGS T BOEING MILITARY
PS13507 APPLICATION OF MOISTURE AND FUNGUS RESISTANT H BOEING MILITARY
PS13508 APPLICATION OF AERODYNAMIC FAIRING COMPOUND V BOEING MILITARY
PS13518 APPLICATION OF POLYSULFIDE TO TRANSPARENCY EDG F BOEING MILITARY
PS13525 POLYURETHANE CORROSION RESISTANT COATING, SPRAY APPLICATION OF AF BOEING MILITARY
PS13550.1 COATING SYSTEM, EPOXY (FR), APPLICATION OF AF BOEING MILITARY
PS13553 IMPACT RESISTANT COATING SYSTEM – INACTIVE NOTICE AH BOEING MILITARY
PS13555 COATING, ANTI-CHAFE Y BOEING MILITARY
PS13560 INACTIVE NOTICE FOR PS13560 – HEAT RESISTANT URETHANE COATING (DOUGLAS COM H BOEING MILITARY
PS13607 SEALING, CORROSION PROTECTION OF EXTERIOR JO R BOEING MILITARY
PS13630 PAINTING OF F/A-18 AND AV-8 AIRCRAFT AG BOEING MILITARY
PS13630.1 PAINTING AT DETAIL AND ASSEMBLY LEVEL AH BOEING MILITARY
PS13630.2 FINAL PAINT OF F/A-18 AND AV-8 AIRCRAFT M BOEING MILITARY
PS13630.3 REWORK OF PAINTED SURFACES J BOEING MILITARY
PS13646 PAINTING OF F-15 AIRCRAFT AN BOEING MILITARY
PS13656 APPLICATION OF MMS 417 CONDUCTIVE COATING T BOEING MILITARY
PS13662 PAINT MOLDLINE F/A-18 E/F & EA-18G AIRCRAFT AF BOEING MILITARY
PS13690 APPLICATION OF ELASTOMERIC MATERIAL L BOEING MILITARY
PS14007 FORMING ALUMINUM ALLOY WROUGHT PRODUCTS AB BOEING MILITARY
PS14014 FORMING FERROUS ALLOYS F BOEING MILITARY
PS14017 FORMING OF TITANIUM ALLOYS (EXPORT CONTROL) V BOEING MILITARY
PS14017 FORMING OF TITANIUM ALLOYS (EXPORT CONTROL) DEVIATION 3 BOEING MILITARY
PS14018 FABRICATION OF METAL NAMEPLATES R BOEING MILITARY
PS14022 FABRICATION OF INSERTS AND PLUGS FOR ALUMINUM F L BOEING MILITARY
PS14023 PEENING R BOEING MILITARY
PS14030 HONEYCOMB SANDWICH ASSEMBLIES, ALUMINUM, EDGING, FABRICATION AND REWORK OF K BOEING MILITARY
PS14031 REPAIR OF GLASS FABRIC AND KEVLAR 49 FABRIC J BOEING MILITARY
PS14032 PREPARATION AND APPLICATION OF PLASTIC FILLE V BOEING MILITARY
PS14034 LAMINATES, REINFORCED PLASTIC, FABRICATION OF AE BOEING MILITARY
PS14034 LAMINATES, REINFORCED PLASTIC, FABRICATION OF AE PSD GKN – BOEING MILITARY
PS14034.1 LAMINATES, REINFORCED PLASTIC, FABRICATION OF L BOEING MILITARY
PS14034.2 DUCTS, PRESSURE, GLASS FABRIC REINFORCED P G BOEING MILITARY
PS14034.3 FABRICATION OF NON-WOVEN GLASS FIBER REINF E BOEING MILITARY
PS14034.4 LAMINATES, GLASS REINFORCED PHENOLIC, FABRI E BOEING MILITARY
PS14034.9 STRUCTURAL AND/OR COMPLEX FIBERGLASS/EPOXY LAMINATES, FABRICATION OF B BOEING MILITARY
PS14047 BONDING OF FAIRING ASSEMBLIES TO MOLD LINE SURFACES OF AIRCR L BOEING MILITARY
PS14059 LAMINATES, GLASS FABRIC REINFORCED SILICONE RUBBER AND THERM P BOEING MILITARY
PS14070 STORAGE, SIZE SELECTION AND APPLICATION OF HEAT SHRINKABLE M R BOEING MILITARY
PS14080 APPLICATION OF MARKINGS TO PANELS N BOEING MILITARY
PS14085 APPLICATION OF VIBRATION AND SOUND DAMPING TAPE K BOEING MILITARY
PS14098 FABRICATING TITANIUM AND TITANIUM ALLOYS (DPS 4.801) – INACTIVE L BOEING MILITARY
PS14111 MACHINING AND DRILLING COMPOSITES T BOEING MILITARY
PS14111 MACHINING AND DRILLING COMPOSITES T SUPPLEMENT 2 BOEING MILITARY
PS14111.2 TRIMMING COMPOSITE PARTS WITH ABRASIVE WATERJET CUTTER E BOEING MILITARY
PS14120 SANDWHICH MATERIAL, ALUMINUM HONEYCOMB CORE K BOEING MILITARY
PS14124 SANDWHICH MATERIAL, HONEYCOMB CORE, CARBON SKINS, FABRICATIO P BOEING MILITARY
PS14124 PS14124 REV P DEV 1 SANDWICH MATERIAL, HONEYCOMB CORE, CARBO P DEVIATION 1 BOEING MILITARY
PS14133 INACTIVE NOTICE PS14133 – PHENOLIC PLASTICS; MACHINING OF (DOUGLAS AIRCRAFT) B BOEING MILITARY
PS14134 EDGE FILLING AND POTTING OF ASSEMBLIES H BOEING MILITARY
PS14137 INACTIVE NOTIVE PS14137 – INSTALLATION OF ADHESIVE BONDED INSERTS (DPS 1.902-3) K BOEING MILITARY
PS14148 FABRICATION AND APPLICATION OF F/A-18 E/F BLADE SEALS AND TR Y BOEING MILITARY
PS14149 CUTTING OF FOAM, PLASTIC AND RUBBER PARTS B BOEING MILITARY
PS14161.1
INACTIVE NOTICE FOR PS14161.1 – FLUID PIPING AND FITTINGS; FABRICATION OF (DPS 3.80, -5, -7)
L BOEING MILITARY
PS14190 NAMEPLATES AND MARKERS, PLASTIC FILM, FABRICATION OF K BOEING MILITARY
PS14191 FABRICATION OF METAL NAMEPLATES AND PANELS-ANODIZE-PHOTOGRAP P BOEING MILITARY
PS14211 SUPERPLASTIC FORMING (SPF) OF TITANIUM ALLOY P BOEING MILITARY
PS14211 SUPERPLASTIC FORMING (SPF) OF TITANIUM ALLOY SHEET AND PLATE P DEVIATION 1 BOEING MILITARY
PS14211.2 PS14211.2 REV G – SUPERPLASTIC FORMING (SPF) OF TI-6AL-4V TI G BOEING MILITARY
PS14213 VACUUM FORMING OF F-15 TITANIUM WING SKINS M BOEING MILITARY
PS14213 VACUUM FORMING OF F-15 TITANIUM WING SKINS M DEVIATION 7 BOEING MILITARY
PS14214 FAB’, PROCUREMENT ACCEPTANCE OF HEAT & CORR J BOEING MILITARY
PS14216 PS14216 REV AC EDGE ATTACHMENT BONDING OF ACRYLIC AND POLYCA AC BOEING MILITARY
PS14223 FABRICATION, PROCUREMENT AND ACCEPTANCE OF CORROSION RESISTA W BOEING MILITARY
PS14231 INACTIVE NOTICE FOR PS14231 – SUPERPLASTIC FORMING/DIFFUSION BONDING (SPF/DB) OF
TITANIUM ALLOY SHEET, TWO SHEET PROCESS N BOEING MILITARY
PS14240 CARBON/EPOXY, LAMINATES, FABRICATION AND ACCEPTANCE OF T BOEING MILITARY
PS14240 CARBON/EPOXY, LAMINATES, FABRICATION AND ACCEPTANCE OF T PSD GKN B BOEING MILITARY
PS14240.3 CARBON/EPOXY, HIGH STRENGTH, THICK MONOLITH K BOEING MILITARY
PS14250 LOW TEMP CURE EPOXY LAMINATES AND SANDWICH STR C BOEING MILITARY
PS14268 CARBON FIBER REINFORCED TOUGHENED EPOXY (NET RESIN) LAMINATES, FABRICATION AND
ACCEPTANCE OF
AB BOEING MILITARY
PS14268 CARBON FIBER REINFORCED TOUGHENED EPOXY (NET RESIN) LAMINATES, FABRICATION AND
ACCEPTANCE OF
AB DEVIATION 1 BOEING MILITARY
PS14269 FIBER PLACED CARBON/EPOXY LAMINATES, FABRICATION AND ACCEPTA E BOEING MILITARY
PS14278 FABRICATION AND INSTALLATION OF F/A-18 E/F BOND-ON WALKWAY COATING F BOEING MILITARY
PS14280 PLASTIC INJECTION MOLDINGS, FABRICATION AND ACCEPTANCE OF G BOEING MILITARY
PS14288 ROTOMOLDING OF NYLON MATERIALS F BOEING MILITARY
PS14290 COMPOSITE AND BONDING CURE CYCLE PROCEDURES F/A-18 E/F and EA-18G BOEING MILITARY
PS14290 COMPOSITE AND BONDING CURE CYCLE PROCEDURES U BOEING MILITARY
PS14290 COMPOSITE AND BONDING CURE CYCLE PROCEDURES U GKN – BOEING MILITARY
PS14301 INACTIVE NOTICE FOR PS14301 – COMPOSITES, GENERAL REQUIREMENTS OF, C-17 AND T-45
AIRCRAFT
M BOEING MILITARY
PS14304 INACTIVE NOTICE FOR PS14304 – PREPARATION OF DMS 2278 FOAM CORE – DOUGLAS AIRCRAFT C BOEING MILITARY
PS14306 ADHESIVE BONDING OF METAL FACED SANDWICH PAN H BOEING MILITARY
PS14450 ATMOSPHERIC PRESSURE CURING TOUGHENED EPOXY A BOEING MILITARY
PS14999 COBONDING CARBON/EPOXY PREPREGS, ALUMINUM HONEYCOMB CORE, CA J BOEING MILITARY
PS14999 COBONDING CARBON/EPOXY PREPREGS, ALUMINUM HONEYCOMB CORE, CA J DEVIATION 3 BOEING MILITARY
PS15000 GENERAL HEAT TREATING CRITERIA FOR FERROUS MATERIALS Y BOEING MILITARY
PS15000.10 HARDENING MARTENSITIC STAINLESS STEELS TO A BOEING MILITARY
PS15000.11 HARDENING PH GRADE STAINLESS STEEL TO THE C BOEING MILITARY
PS15000.12 HARDENING PH GRADE STAINLESS STEEL TO CON B BOEING MILITARY
PS15000.13 HARDENING PH GRADE STAINLESS STEELS TO TH B BOEING MILITARY
PS15000.14 HARDENING PH GRADE STAINLESS STEELS TO TH D BOEING MILITARY
PS15000.15 ANNEALING ALLOY STEEL A BOEING MILITARY
PS15000.3 NORMALIZING ALLOY STEELS A BOEING MILITARY
PS15000.4 NORMALIZING AND TEMPERING ALLOY STEELS A BOEING MILITARY
PS15000.5 HARDENING ALLOY STEELS TO 180,000 PSI MINI A BOEING MILITARY
PS15000.6 HARDENING ALLOY STEELS TO 200,000 PSI MINI C BOEING MILITARY
PS15000.7 MARTEMPERING 4340 A BOEING MILITARY
PS15000.8 MARTEMPERING 4330V A BOEING MILITARY
PS15000.9 ANNEALING STAINLESS STEEL AND 18% NI (GRADE 250) A BOEING MILITARY
PS15063 STRESS RELIEF AND EMBRITTLEMENT RELIEF K BOEING MILITARY
PS15169 HEAT TREAT OF AERMET 100 STEEL C BOEING MILITARY
PS15325 VACUUM PROCESSING OF METALS A BOEING MILITARY
PS15326 VACUUM ANNEALING AND VACUUM DEGASSING OF TIT A BOEING MILITARY
PS15500 GENERAL HEAT TREATING CRITERIA FOR ALUMINUM AA BOEING MILITARY
PS15500.2 HEAT TREATING ALUMINUM ALLOYS TO THE -O (A A BOEING MILITARY
PS15500.3 HEAT TREATING OF ALUMINUM ALLOYS TO THE -T A BOEING MILITARY
PS15500.4 HEAT TREATING OF ALUMINUM ALLOYS TO THE -T A BOEING MILITARY
PS15500.5 HEAT TREATING ALUMINUM ALLOYS TO THE -T81, A BOEING MILITARY
PS15500.6 HEAT TREATING OF ALUMINUM ALLOYS TO THE -T D BOEING MILITARY
PS15500.7 HEAT TREATING OF ALUMINUM ALLOYS TO THE -T B BOEING MILITARY
PS15500.8 HEAT TREATING OF ALUMINUM ALLOYS TO THE -T A BOEING MILITARY
PS15500.9 STRESS RELIEF OF ALUMINUM ALLOYS A BOEING MILITARY
PS15600 GENERAL HEAT TREATING CRITERIA FOR NICKEL BA G BOEING MILITARY
PS15603 AGE HARDENING OF SOLUTION HEAT TREATED INCONE C BOEING MILITARY
PS15604 ANNEALING INCONEL ALLOY 600(INCONEL)WIRE & ST C BOEING MILITARY
PS15605 STRESS RELIEF OF INCONEL ALLOY 600(INCONEL)WI C BOEING MILITARY
PS15606 STRESS EQUALIZE INCONEL ALLOY 600 (INCONEL)WI C BOEING MILITARY
PS15607 ANNEALING OF INCONEL ALLOY X-750(INCONEL X) C BOEING MILITARY
PS15608 STRESS EQUALIZE INCONEL ALLOY X-750 (INCONEL X) C BOEING MILITARY
PS15609 HARDENING INCONEL ALLOY X-750 TO RC30 TO RC37 D BOEING MILITARY
PS15610 HARDENING INCONEL ALLOY X-750 (INCONEL X) (SOLUTION TREATMEN D BOEING MILITARY
PS15611 AGE HARDENING OF NO. 1 TEMPER INCONEL ALLOY X-750 (INCONEL X B BOEING MILITARY
PS15612 AGE HARDENING OF SOLUTION TREATED INCONEL ALLOY X-750 (INCON B BOEING MILITARY
PS15613 AGE HARDENING OF SPRING TEMPER INCONEL ALLOY X-750 (INCONEL B BOEING MILITARY
PS15614 ANNEALING (SOLUTION HEAT TREATING) OF INCONEL ALLOY 718 C BOEING MILITARY
PS15620 ANNEALING ALLOY 400 ( MONEL) C BOEING MILITARY
PS15630 SOLUTION HEAT TREATMENT AND AGING OF ALLOY A-286 C BOEING MILITARY
PS15631 AGE HARDENING OF ALLOY A-286 D BOEING MILITARY
PS15633 ANNEALING INCONEL ALLOY 625 C BOEING MILITARY
PS15701 GENERAL HEAT TREATING CRITERIA FOR ALUMINUM ALLOYS (DOUGLAS) – INACTIVE R BOEING MILITARY
PS15702 INACTIVE NOTICE FOR PS15702 – STRESS RELIEF OF 2024, 6061, 7050, AND 7075 F BOEING MILITARY
PS15704 INACTIVE NOTICE FOR PS15704 – ANNEALING 2024 AND 6061 TO CONDITION -O G BOEING MILITARY
PS15706 HARDENING 2014 SHEET, PLATE, FORGINGS & EXTRUSIONS TO CONDITION -T6 OR -T62 – INACTIVE J BOEING MILITARY
PS15709 HARDENING 7075 SHEET AND PLATE TO THE -T76 TEMPER – INACTIVE G BOEING MILITARY
PS15710 HARDENING 2219 SHEET, PLATE, AND EXTRUSIONS TO THE T6 (2) TEMPER – INACTIVE H BOEING MILITARY
PS15711 HARDENING OF 2024 SHEET, EXTRUSIONS, BARS, PLATE AND TUBING – INACTIVE H BOEING MILITARY
PS15714 INACTIVE NOTICE FOR PS15714 – HARDENING OF 7049 FORGED PRODUCTS TO THE -T73 CONDITION E BOEING MILITARY
PS15715 HARDENING 7050 PLATE TO THE -T76 TEMPER – INACTIVE F BOEING MILITARY
PS15716 INACTIVE NOTICE FOR PS15716 – HARDENING OF 6061 SHEET, PLATE, EXTRUSIONS, BAR AND
TUBING TO CONDITION -T42
G BOEING MILITARY
PS15717 HARDENING 6061 SHEET, PLATE, EXTRUSIONS, TUBING AND BAR TO CONDITION -T6 – INACTIVE H BOEING MILITARY
PS15718 INACTIVE NOTICE FOR PS15718 – ANNEALING 7050, 7075, AND 7475 SHEET, PLATE, EXTRUSIONS,
FORGINGS, AND BARS TO CONDITION -O
H BOEING MILITARY
PS15719 HARDENING 7050 EXTRUSIONS TO THE -T76 TEMPER – INACTIVE H BOEING MILITARY
PS15720 INACTIVE NOTICE FOR PS15720 – HARDENING 7075 SHEET AND PLATE UP TO 1.0 INCH TO
CONDITION -T6
H BOEING MILITARY
PS15721 HARDENING 7075 PLATE GREATER THAN 1.0 INCHES – INACTIVE H BOEING MILITARY
PS15723 HARDENING 7050 FORGINGS, PLATE AND EXTRUSION – INACTIVE H BOEING MILITARY
PS15724 HARDENING 7075 EXTRUSION TO THE -T76 TEMPER – INACTIVE H BOEING MILITARY
PS15725 HARDENING 7475-0 ALCLAD (DMS 2234) SHEET TO THE -T761 TEMPER – INACTIVE F BOEING MILITARY
PS15726 HARDENING 7475-0 BARE SHEET (DMS 2281) TO THE -T761 TEMPER – INACTIVE F BOEING MILITARY
PS15727 HARDENING 2004 SHEET TO THE -T6(2) TEMPER – INACTIVE E BOEING MILITARY
PS15730 INACTIVE NOTICE FOR PS15730 – HARDENING OF 2219 SHEET AND PLATE FROM THE -T31, -T351, –
T37 CONDITION TO THE -T81, -T851, -T87 CONDITION
D BOEING MILITARY
PS15732 INACTIVE NOTICE FOR PS15732 – HARDENING 7475 SHEET TO THE -T61 CONDITION D BOEING MILITARY
PS15734 HARDENING 2024 SHEET, PLATE, EXTRUSIONS, BAR, AND TUBING TO -T62 – INACTIVE H BOEING MILITARY
PS15735 INACTIVE NOTICE FOR PS15735 – HARDENING OF 2024 FROM THE -T3 TO THE -T81 CONDITION OR
FROM THE -T351 TO THE -T851 CONDITION
E BOEING MILITARY
PS15737 INACTIVE NOTICE FOR PS15737 – HARDENING OF 6013 SHEET TO CONDITION -T42 E BOEING MILITARY
PS15738 INACTIVE NOTICE FOR PS15738 – HARDENING OF 6013 SHEET TO CONDITION -T62 E BOEING MILITARY
PS15748 HARDENING 7075 FORGINGS, EXTRUSIONS AND PLATE TO THE -T73 TE H BOEING MILITARY
PS15760 GENERAL HEAT TREATING CRITERIA FOR TITANIUM ALLOYS (DPS 6.33) – INACTIVE L BOEING MILITARY
PS15761 STRESS RELIEF PROCEDURE -TITANIUM ALLOYS (DPS6.33) M BOEING MILITARY
PS15762 ANNEALING PROCEDURE – TITANIUM ALLOYS (DPS 6.33) H BOEING MILITARY
PS15763 BETA STABILIZATION TREATMENT OF 6AI-6V-2SN TITAIUM ALLOY BAR F BOEING MILITARY
PS15764 HARDENING OF TI-15V-3CR-3SN-3AL SHEET AND STRIP, DMS2237 – INACTIVE F BOEING MILITARY
PS15765 INACTIVE NOTICE FOR PS15765 – HARDENING OF Ti-3Al-8V-6Cr-4Mo-4Zr BAR AND WIRE, DMS2267 E BOEING MILITARY
PS15800 GENERAL HEAT TREATING CRITERIA FOR TITANIUM F DEVIATION 4 BOEING MILITARY
PS15800 GENERAL HEAT TREATING CRITERIA FOR TITANIUM F BOEING MILITARY
PS15807 STRESS RELIEF PROCEDURE – TITANIUM ALLOYS L BOEING MILITARY
PS15815 SOLUTION HEAT TREATING AND AGING OF TI-15V-3 A BOEING MILITARY
PS15917 ANNEALING AZ-31B (ANY CONDITION) B BOEING MILITARY
PS15918 STRAIN RELEASE OF COPPER BASE ALLOY SPRINGS B BOEING MILITARY
PS15923 ANNEALING 19-9DL B BOEING MILITARY
PS15929 HEAT TREATMENT OF 1095 BELLEVILLE WASHERS B BOEING MILITARY
PS15935 HEAT TREATMENT OF BERYLLIUM COPPER ALLOYS K BOEING MILITARY
PS16001 MARKING OF FABRICATED PARTS CE BOEING MILITARY
PS16001.12 DOT PEEN MARKING OF METAL PARTS C BOEING MILITARY
PS16001.13 MARKING OF ITEMS WITH COUNTRY OF ORIGIN NEW BOEING MILITARY
PS16001.3 AGE CONTROL MARKING F BOEING MILITARY
PS16002 MARKING OF IDENTIFICATION AND MODIFICATION AP BOEING MILITARY
PS16010 IDENTIFICATION OF PARTS AND ASSEMBLIES (DOUG T BOEING MILITARY
PS16011 INACTIVE NOTICE FOR PS16011 – MARKING METHODS AND MATERIALS (DPS 3.27, -1,-2, -3, -4, -5, -7) W BOEING MILITARY
PS16011.2 INACTIVE NOTICE FOR PS 16011.2 – MARKING METHODS AND MATERIALS; TEMPORARY MARKINGS
(DPS3.27-7)
P BOEING MILITARY
PS16011.4 DOT PEEN MARKING OF C-17 AND COMMERCIAL MET A BOEING MILITARY
PS16014 MARKING OF ITEMS WITH A 2D DATA MATRIX CODE D BOEING MILITARY
PS16014.1 MARKING OF ITEMS WITH A 2D DATA MATRIX CODE D BOEING MILITARY
PS16120 IDENTIFICATION MARKING OF METALS M BOEING MILITARY
PS17001.1 TORQUE VALUES FOR FLUID LINE CONNECTIONS R BOEING MILITARY
PS17001.2 FITTINGS; INSTALLATION INTO BOSSES J BOEING MILITARY
PS17002 CONTROL SYSTEMS, AIRCRAFT; INSTALLATION OF U BOEING MILITARY
PS17004 SAFETYING PRACTICES AG BOEING MILITARY
PS17004.1 SAFETYING WITH SAFETY CABLE D BOEING MILITARY
PS17020 FUEL CELLS, BLADDER TYPE; INSTALLATION OF Y BOEING MILITARY
PS17031 BEARINGS/BUSHINGS, GROOVED OUTER RACE, STAKI AA BOEING MILITARY
PS17031.1 BEARINGS, THREADED OUTER RING (K4M10, K4M1 C BOEING MILITARY
PS17034 BUSHINGS, INSTALLATION L BOEING MILITARY
PS17039 INSTALLATION AND ASSEMBLY PROCEDURES G BOEING MILITARY
PS17048 INACTIVE NOTICE FOR PS17048 – LINEAR ROLLER STAKING OF SEAT RAILS (C17 AIR) E BOEING MILITARY
PS17054.2 INSTALLATION OF BOND-ON NUTPLATES A BOEING MILITARY
PS17138 INACTIVE NOTICE FOR PS17138 – SWAGE FITTINGS, SIERRACIN/HARRISON; INSTALLATION OF
(DPS3.808)
R BOEING MILITARY
PS17164 INACTIVE NOTICE FOR PS17164 – INSTALLATION OF PERMANENT FLARELESS DME SLEEVE FITTING
CONNECTIONS
D BOEING MILITARY
PS17169 BONDING AND GROUNDING; ELECTRICAL AP BOEING MILITARY
PS17600 INACTIVE NOTICE FOR PS17600 – BUSHINGS AND BEARINGS; INSTALLATION AND STAKING OF
(DPS1.33-17)
P BOEING MILITARY
PS17601 ANNULAR GROOVED BEARINGS D BOEING MILITARY
PS18021 LUBRICANTS, BONDED DRY FILM, APPLICATION OF AD BOEING MILITARY
PS18050 LUBRICATION, GENERAL AIRCRAFT P BOEING MILITARY
PS18059 INACTIVE NOTICE FOR PS18059 – PREPARATION AND APPLICATION OF SOLID FILM LUBRICANTS
(DPS3.177)
L BOEING MILITARY
PS19000 INSTALLATION OF FASTENERS AB BOEING MILITARY
PS19003 INACTIVE NOTICE FOR PS19003 – FASTENERS, CAPTIVE PANEL, INSTALLATION OF (DPS3.67-77) E BOEING MILITARY
PS19004 INACTIVE NOTICE FOR PS19004 – INSERTS; FLOATING, THREADED, INSTALLATION OF (DPS1.902-1) E BOEING MILITARY
PS19005 INACTIVE NOTICE FOR PS19005 – INSTALLATION OF INSERTS IN SANDWICH AND OPEN PANELS,
POTTED (DPS1.902)
F BOEING MILITARY
PS19017 FASTENERS, ADHESIVE BONDED M BOEING MILITARY
PS19110 FASTENERS, SOLID RIVETS; INSTALLATION W BOEING MILITARY
PS19115 INSTALLATION OF TUBULAR RIVETS P BOEING MILITARY
PS19120 INSTALLATION OF PULL-THRU MECHANICALLY EXPAN R BOEING MILITARY
PS19121 FASTENERS, LOCKED SPINDLE BLIND RIVETS, INST AA BOEING MILITARY
PS19122 FASTENERS, CHOBERT RIVETS; INSTALLATION L BOEING MILITARY
PS19127 FASTENERS, HUCK BLIND BOLTS; INSTALLATION O T BOEING MILITARY
PS19135 FASTENERS, JO-BOLT TYPE BLIND BOLTS; INSTALL AA BOEING MILITARY
PS19145 INSTALLATION OF HI-LOK FASTENERS AF BOEING MILITARY
PS19146 FASTENERS, TAPER-LOK; INSTALLATION R BOEING MILITARY
PS19150 FASTENERS, LOCKBOLTS, INSTALLATION OF AH BOEING MILITARY
PS19151 FASTENERS, EDDIE BOLT 2; INSTALLATION OF L BOEING MILITARY
PS19180 COLD WORKING HOLES; SPLIT SLEEVE METHOD T BOEING MILITARY
PS19200 FASTENERS, BOLTS AND SCREWS: INSTALLATION OF BA BOEING MILITARY
PS19204 COLD FORMING INTERNAL THREADS IN ALUMINUM AL D BOEING MILITARY
PS19210 CONTROLLED TORQUE INSTALLATION OF FLUSH SCREW N BOEING MILITARY
PS19260 INSERTS, HELICAL COIL; INSTALLATION OF M BOEING MILITARY
PS19260.1 INSERTS, HELI-COIL, REPAIR TYPE; INSTALLAT C BOEING MILITARY
PS19262 INSERTS, SCREW THREAD, LOCKED IN F BOEING MILITARY
PS19402 HOLE PREPARATION – FEEDS AND SPEEDS AR BOEING MILITARY
PS19408 FASTENERS, QUARTER TURN, INSTALLATION E BOEING MILITARY
PS19409.1 AUTOMATIC DRILLING AND FASTENING EQUIPMENT D BOEING MILITARY
PS19419 NUTPLATE, RIVETLESS; INSTALLATION E BOEING MILITARY
PS19419.1 NUTPLATE, RIVETLESS; INSTALL OF FORCETECS E BOEING MILITARY
PS19420 FASTENERS, SOLID RIVETS; INSTALLATION OF (BO U BOEING MILITARY
PS19424 FASTENERS, RIVNUT; INSTALLATION OF (DOUGLAS AI E BOEING MILITARY
PS19425 FASTENERS, LOCKBOLTS U BOEING MILITARY
PS19427 FASTENERS, HI-LOK AND MD PINS; INSTALLATION AF BOEING MILITARY
PS19429 CLIP-ON NUTS, INSTALLATION F BOEING MILITARY
PS20001 PROTECTION OF PARTS DURING FABRICATION AND TEMPORARY STORAGE AC BOEING MILITARY
PS20005 PRECAUTIONS IN USING LIQUIDS ON AIRCRAFT AND A B BOEING MILITARY
PS20006 SHEET METAL AND EXTRUSIONS, REQUIREMENTS AND ACCEPTANCE CRITERIA FOR PARTS
FABRICATED FROM T BOEING MILITARY
PS20009 METALLIC MATERIALS AND PARTS; STRAIGHTENING J BOEING MILITARY
PS20014 USE OF TORQUE WRENCHES AND ADAPTORS K BOEING MILITARY
PS20016 BARREL TUMBLING AND VIBRATORY FINISHING D BOEING MILITARY
PS20018 SURFACE FINISH REQUIREMENTS FOR ROUND HOLES F BOEING MILITARY
PS20022 CHEMICAL MILLING R BOEING MILITARY
PS20022.1 CHEMICAL MILLING OF ALUMINUM ALLOYS M BOEING MILITARY
PS20022.11 MASKING AND SCRIBING FOR CHEMICAL MILLING V BOEING MILITARY
PS20022.3 CHEMICAL MILLING OF TITANIUM AND TITANIUM K BOEING MILITARY
PS20024 DEBURRING, BLENDING, AND SANDING OF METAL PA R BOEING MILITARY
PS20028 TRIMMING OF METALLIC DETAIL PARTS FOR ASSEM H BOEING MILITARY
PS20108 STORAGE AND HANDLING OF THE AV-8 AND T-45 SE J BOEING MILITARY
PS20109 PRESERVATION, STORAGE, HANDLING AND INSTALL E BOEING MILITARY
PS20112.3 INSTALLATION OF F/A-18 AND T-45 THIN LAYER EXPLOSIVE (TLX) E BOEING MILITARY
PS20159 CRYOGENIC FLUIDS, NONFLAMMABLE; SAFETY REQUIREMENTS FOR STORAGE, HANDLING, USE
AND TRANSPORTATION OF E BOEING MILITARY
PS20184 LASER CUTTING OF METALS D BOEING MILITARY
PS20207 REPAIR OF ALUMINUM SKIN – HONEYCOMB CORE, SA J BOEING MILITARY
PS20209 REPAIR METHODS FOR FIBER REINFORCED EPOXY A L BOEING MILITARY
PS20209.1 REPAIR METHODS FOR DELAMINATIONS IN FIBER D BOEING MILITARY
PS20209.2 REPAIR METHODS FOR FIBER REINFORCED EPOXY NEW BOEING MILITARY
PS20210 DISPOSAL OF SCRAPPED COMPOSITE & SALVAGE OF D BOEING MILITARY
PS20401 MARKING LAYOUT ON METALS E BOEING MILITARY
PS20509 AREA REQUIREMENTS FOR ADHESIVE BONDING/COMPOSITE FABRICATION U BOEING MILITARY
PS20509 AREA REQUIREMENTS FOR ADHESIVE BONDING/COMPOSITE FABRICATION Deviation – U BOEING MILITARY
PS20509 AREA REQMTS FOR ADHESIVE U PSD 1 BOEING MILITARY
PS20509 AREA REQUIREMENTS FOR ADHESIVE BONDING/COMPOSITE FABRICATION U PSD – BOEING MILITARY
PS20509 AREA REQUIREMENTS FOR ADHESIVE BONDING/COMPOSITE FABRICATION U PSD BDSANDBGS – BOEING MILITARY
PS20650 CHEMICAL BLANKING E BOEING MILITARY
PS20650.3 CHEMICAL BLANKING OF STAINLESS STEEL PARTS G BOEING MILITARY
PS20700 ASSEMBLY SHOP PRACTICE INDEX (DOUGLAS AIRCRAFT) – INACTIVE C BOEING MILITARY
PS20700.1 INACTIVE NOTICE FOR PS 20700.1 – ASSEMBLY SHOP PRACTICE (DOUGLAS COMMERCIA AT BOEING MILITARY
PS20700.6 ASSEMBLY SHOP PRACTICE, OVERSIZE FASTENER INSTALLATION (C-17 AIRCRAFT) – INACTIVE J BOEING MILITARY
PS20700.7 ASSEMBLY SHOP PRACTICE, COMPOSITE REPAIR AND OVERSIZE FASTENER INSTALLATION (C-17
AIRCRAFT) – INACTIVE
F BOEING MILITARY
PS20701 FABRICATION PRACTICES FOR METALS; MINIMUM (D D BOEING MILITARY
PS20701.1 EDGE CONDITION REQUIREMENTS (DPS 4.710-1) – INACTIVE J BOEING MILITARY
PS20701.2 FABRICATION PRACTICES; SHEET METAL (DOUGLAS COMMERCIAL AND C-17 AIRCRAFT) – INACTIVE J BOEING MILITARY
PS20701.4 SHEARING, PUNCHING AND BLANKING (DOUGLAS AIRCRAFT) – INACTIVE D BOEING MILITARY
PS20701.5 INACTIVE NOTICE FOR PS20701.5 – SPRING FABRICATION PRACTICES (DOUGLAS AIRCRAFT) C BOEING MILITARY
PS20705 FUEL SYSTEM; INERTING OF, F/A-18 SERIES F BOEING MILITARY
PS20708 HOLE PREPARATION IN HIGH STRENGTH STEELS D BOEING MILITARY
PS20710 HIGH STRENGTH STEELS, MACHINING AND GRINDING E BOEING MILITARY
PS20710.1 HIGH STRENGTH STEELS, MACHINING OF C BOEING MILITARY
PS20710.2 HIGH STRENGTH STEEL, CHROMIUM PLATE, GRIND A BOEING MILITARY
PS20722 HOLE MASKING FOR ENHANCED PROCESS CONTROLLED METALLIC PARTS A BOEING MILITARY
PS21085 ENVIRONMENTAL CONTROL SYSTEM, F/A-18 C/D, E/F G BOEING MILITARY
PS21097 INACTIVE NOTICE FOR PS21097 – PYLON FUEL AND FIRE EXTINGUISHER SYSTEMS, C-17 E BOEING MILITARY
PS21150 TEST METHODS FOR BONDED METAL STRUCTURES B BOEING MILITARY
PS21150.1 TEST METHODS FOR BONDED METAL STRUCTURES ( C BOEING MILITARY
PS21150.2 TEST METHODS FOR BONDED METAL STRUCTURES ( B BOEING MILITARY
PS21150.3 TEST METHODS FOR BONDED METAL STRUCTURES ( A BOEING MILITARY
PS21150.4 TEST METHODS FOR BONDED METAL AND COMPOSIT C BOEING MILITARY
PS21150.5 TEST METHODS FOR BONDED METAL STRUCTURES ( A BOEING MILITARY
PS21150.6 TEST METHODS FOR BONDED METAL STRUCTURES ( A BOEING MILITARY
PS21150.7 TEST METHODS FOR BONDED METAL STRUCTURES ( A BOEING MILITARY
PS21150.8 TEST METHODS FOR BONDED METAL OR COMPOSIT A BOEING MILITARY
PS21151 TEST METHODS FOR COMPOSITES D BOEING MILITARY
PS21151.1 TEST METHODS FOR COMPOSITES: SANDWICH BEA C BOEING MILITARY
PS21151.10 TEST METHODS FOR COMPOSITES: OPEN HOLE TE E BOEING MILITARY
PS21151.11 TEST METHODS FOR COMPOSITES: SINGLE LAP S A BOEING MILITARY
PS21151.2 TEST METHODS FOR COMPOSITES: INTERLAMINAR C BOEING MILITARY
PS21151.3 TEST METHODS FOR COMPOSITES: LONGITUDINAL B BOEING MILITARY
PS21151.4 TEST METHODS FOR COMPOSITES: DOUBLE LAP SH C BOEING MILITARY
PS21151.5 TEST METHODS FOR COMPOSITES: RAIL SHEAR B BOEING MILITARY
PS21151.6 TEST METHODS FOR COMPOSITES: EDGEWISE SAN B BOEING MILITARY
PS21151.7 TEST METHODS FOR COMPOSITES: COUPON TENSIL F BOEING MILITARY
PS21151.9 TEST METHODS FOR COMPOSITES: COUPON COMPRE D BOEING MILITARY
PS21153 TEST METHOD FOR DETERMINING NODE BOND STRENG C BOEING MILITARY
PS21199 ALPHA-CASE DETECTION ON TITANIUM C BOEING MILITARY
PS21199 Deviation to PS21199 (Rev C) ALPHA-CASE DETECTION ON TITANIUM C PSD GKN 1 BOEING MILITARY
PS21202 PENETRANT INSPECTION AU BOEING MILITARY
PS21203 HARDNESS TESTING OF PARTS AND MATERIALS K BOEING MILITARY
PS21205 TEMPER ETCH INSPECTION FOR MACHINED OR GROUN K BOEING MILITARY
PS21206 RADIOGRAPHIC INSPECTION – GENERAL R BOEING MILITARY
PS21206.1 RADIOGRAPHIC INSPECTION OF METALLIC AND CO J BOEING MILITARY
PS21206.1 RADIOGRAPHIC INSPECTION OF METALLIC AND COMPOSITE HONEYCOMB ASSEMBLIES,
DOUBLERS, TRIPLERS, AND STRUCTURAL PARTS PSD GKN REV – BOEING MILITARY
PS21206.6 COMPUTED RADIOGRAPHIC INSPECTION G BOEING MILITARY
PS21207 EDDY CURRENT DETERMINATION OF ELECTRICAL CON G BOEING MILITARY
PS21211 ULTRASONIC INSPECTION OF WROUGHT METALS P BOEING MILITARY
PS21211.1 ULTRASONIC INSPECTION OF WELDS G BOEING MILITARY
PS21211.3 ULTRASONIC INSPECTION OF FINISH-MACHINED P J BOEING MILITARY
PS21211.4 ULTRASONIC INSPECTION OF COMPOSITE LAMINATES, STRUCTURES, AND HONEYCOMB
ASSEMBLIES
AA BOEING MILITARY
PS21212 HARDNESS INSPECTION OF METALS (DPS1.05, -1, -2, -7) – INACTIVE G BOEING MILITARY
PS21219 EDDY CURRENT INSPECTION E BOEING MILITARY
PS21230 WRITTEN PROCEDURE REQUIREMENTS FOR NONDESTRUCT TESTING E BOEING MILITARY
PS21233 NONDESTRUCTIVE TESTING OF HONEYCOMB ASSEMBLIES AND COMPOSITE L BOEING MILITARY
PS21233 NONDESTRUCTIVE TESTING OF HONEYCOMB ASSEMBLIES AND COMPOSITE L PSD AV-8 1 BOEING MILITARY
PS21233 NONDESTRUCTIVE TESTING OF HONEYCOMB ASSEMBLIES AND COMPOSITE L PSD F-15 1 BOEING MILITARY
PS21233 NONDESTRUCTIVE TESTING OF HONEYCOMB ASSEMBLIES AND COMPOSITE L PSD F-18 1 BOEING MILITARY
PS21233.1 ACCEPTANCE CRITERIA FOR NONDESTRUCTIVE TES F BOEING MILITARY
PS21233.8 INACTIVE NOTICE FOR PS 21233.8 – NONDESTRUCTIVE TESTING OF HONEYCOMB ASSEMBLIES AND
COMPOSITE STRUCTURES FOR (DOUGLAS COMMERCIAL AIRCRAFT)
D BOEING MILITARY
PS21236 ULTRASONIC THICKNESS MEASUREMENTS D BOEING MILITARY
PS21238 ADHESIVE PRIMER COLORSTANDARDS, FABRICATION AND ACCE NEW BOEING MILITARY
PS21239 COATING THICKNESS MEASUREMENT D BOEING MILITARY
PS21239.2 COATING THICKNESS MEASUREMENT BY DIRECT RE A BOEING MILITARY
PS21240 NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATI L BOEING MILITARY
PS21241 LEAK TESTING, GENERAL D BOEING MILITARY
PS21241.1 MASS SPECTROMETER LEAK TESTING F BOEING MILITARY
PS21241.2 BUBBLE LEAK TESTING F BOEING MILITARY
PS21244 ULTRASONIC RESONANCE INSP OF BONDED ASSY F BOEING MILITARY
PS21252 VISUAL INSPECTION OF COMPOSITE PARTS AND BON H BOEING MILITARY
PS21252.2 INACTIVE NOTICE FOR PS 21252.2 – VISUAL INSPECTION OF COMPOSITE PARTS AND BONDED
COMPOSITE PARTS AND BONDED
E BOEING MILITARY
PS21263 NONDESTRUCTIVE TESTING OF F/A-18 E/F COMPOSITES AND BONDED ASSEMBLIES W BOEING MILITARY
PS21266 ELECTROMAGNETIC TESTING- GENERAL D BOEING MILITARY
PS21266.8 ELECTROMAGNETIC TESTING – WAVEGUIDE TRANSMIS NEW BOEING MILITARY
PS21267 NONDESTRUCTIVE EVALUATION OF ELECTRICALLY SEL G BOEING MILITARY
PS21313 COATING ADHESION TESTS M BOEING MILITARY
PS21330 ACCEPTANCE, REINSPECTION AND STORAGE OF STRUCTURAL ADHESIVES AT* BOEING MILITARY
PS21330.1 ACCEPTANCE, REINSPECTION, AND STORAGE OF A K BOEING MILITARY
PS21332 ACCEPTANCE, REINSPECTION, AND STORAGE OF CARBON/EPOXY, BORON/EPOXY, ARAMID
FIBER/EPOXY, AND GLASS/EPOXY COMPOSITE MATERIALS T BOEING MILITARY
PS21332.1 ACCEPTANCE, REINSPECTION, & STORAGE OF COM H BOEING MILITARY
PS21335 PHYSIOCHEMICAL TEST METHODS FOR RESIN COMPOS D BOEING MILITARY
PS21335.1 PHYSIOCHEMICAL TEST METHODS: THERMAL ANALY D BOEING MILITARY
PS21335.10 PHYSIOCHEMICAL TEST METHODS: IR QUANTITAT C BOEING MILITARY
PS21335.11 PHYSIOCHEMICAL TEST METHODS: GAS CHROMATO C BOEING MILITARY
PS21335.12 PHYSIOCHEMICAL TEST METHODS: METHOD FOR D BOEING MILITARY
PS21335.13 PHYSIOCHEMICAL TEST METHODS: METHODS FOR C BOEING MILITARY
PS21335.14 PHYSIOCHEMICAL TEST METHODS: RHEOMETRIC M E BOEING MILITARY
PS21335.15 PHYSIOCHEMICAL TEST METHODS: DETERMINATIO B BOEING MILITARY
PS21335.16 PHYSIOCHEMICAL TEST METHODS: FTIR TEST FO E BOEING MILITARY
PS21335.18 PHYSIOCHEMICAL TEST METHODS: TMA AND RDS B BOEING MILITARY
PS21335.2 PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI C BOEING MILITARY
PS21335.3 PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI C BOEING MILITARY
PS21335.4 PHYSIOCHEMICAL TEST METHODS: GAS LIQUID CH B BOEING MILITARY
PS21335.5 PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI B BOEING MILITARY
PS21335.6 PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI C BOEING MILITARY
PS21335.7 PHYSIOCHEMICAL TEST METHODS: ATOMIC ABSORP C BOEING MILITARY
PS21335.8 PHYSIOCHEMICAL TEST METHODS: LIQUID C BOEING MILITARY
PS21335.9 PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI C BOEING MILITARY
PS21336 REC INSP PROCEDURES FOR BISMALEIMIDE COMP MATE C BOEING MILITARY
PS21341 WIRE, ELECTRICAL , FOR USE ON BOEING-ST.LOUIS; N BOEING MILITARY
PS22000 WELDING, RESISTANCE, ALUMINUM, NON-HARDENING P BOEING MILITARY
PS22155 RESISTANCE WELDING OF STAINLESS STEEL WIRE MES D BOEING MILITARY
PS22200 WELDING SYMBOLS FOR FUSION WELDING – CANCELLED/SUPERSEDED D BOEING MILITARY
PS22201 ARC FUSION WELDING ALUMINUM AND ALUMINUM ALL U BOEING MILITARY
PS22202 INDEX OF FUSION WELDING SPECIFICATIONS (DOUGLAS AIRCRAFT) – INACTIVE E BOEING MILITARY
PS22210 ARC FUSION WELDING (EXPORT CONTROL) M* BOEING MILITARY
PS22222 QUALIFICATION OF FUSION WELDERS AND WELDING D BOEING MILITARY
PS22240 ARC FUSION WELDING TITANIUM AND TITANIUM ALL L BOEING MILITARY
PS22241 SALVAGE OF MACHINED TITANIUM PARTS BY FUSION H BOEING MILITARY
PS22250 ARC FUSION WELDING STEELS AND CORROSION AND HEAT RESISTANT ALLOYS L BOEING MILITARY
PS22300 ELECTRON BEAM FUSION WELDING (EXPORT CONTROL L BOEING MILITARY
PS22300.1 ELECTRON BEAM WELDING OF F-15 LOWER WING S J BOEING MILITARY
PS22604 BRAZING: LOW CARB, LOW ALLOY OR AUSTENTIC ST J BOEING MILITARY
PS22800 SOFT SOLDERING OF ELECTRICAL AND TRECOT W BOEING MILITARY
PS23001 ACCEPTANCE PROCEDURE FOR AIRFRAME CASTINGS V BOEING MILITARY
PS23007 ACCEPTANCE PROCEDURE FOR ALUMINUM ALLOY T BOEING MILITARY
PS23023 HARDNESS AND ELECTRICAL CONDUCTIVITY INSPECTION ACCEPTANCE C Y BOEING MILITARY
PS23029 TITANIUM FORGINGS, ACCEPTANCE AND TESTING PRO K BOEING MILITARY
PS23038 AUTHORITY FOR MATERIAL SUBSTITUTION V BOEING MILITARY
PS23038 AUTHORITY FOR MATERIAL SUBSTITUTION V PSD F15 – BOEING MILITARY
PS23041 MACHINED PARTS, REQUIRE AND ACCEPTANCE CRITERIA FOR W BOEING MILITARY
PS23041 MACHINED PARTS, REQUIREMENTS AND ACCEPTANCE CRITERIA FOR F-15_MQ-25_XSP PSD – BOEING MILITARY
PS23041 MACHINED PARTS, REQUIREMENTS AND ACCEPTANCE CRITERIA FOR PSD F-15 REV – BOEING MILITARY
PS23052 ACCEPTANCE PRO FOR WROGHT METALLIC RAW MAT D BOEING MILITARY
PS23054 FIRST ARTICAL ENGINEERING EXAMINATION (FAEE) B BOEING MILITARY
PS23071
INACTIVE NOTICE FOR PS23071 – FUSION WELDING- QUALITY STANDARDS (DOUGLAS AIRCRAFT)
E BOEING MILITARY
PS23401 CERTIFICATION OF FURNACES AND TEMPERATURE CO P BOEING MILITARY
PS23401 CERTIFICATION OF FURNACES AND TEMPERATURE CONTROL SYSTEMS FOR HEAT TREATING AND
THERMAL PROCESSING
P DEVIATION 1 BOEING MILITARY
PS23403 PROCESS SOLUTIONS, FREQUENCY OF ANALYSIS OF D BOEING MILITARY
PS23405 CERTIFICATION OF CHEMICAL PROCESSES C BOEING MILITARY
PS23503 PACKAGING, IDENTIFICATION AND STORAGE OF COVER N BOEING MILITARY
PS23600 AGE/SHELF LIFE CONTROL REQUIREMENTS BD BOEING MILITARY
PS24000 PROCESS CONTROL REQUIREMENTS B BOEING MILITARY
PS24000.1 DETERMINING STATISTICAL CONTROL A BOEING MILITARY
PS24000.2 MEASURING PROCESS CAPABILITY A BOEING MILITARY
PS24000.3 DOCUMENTING A PROCESS A BOEING MILITARY
PS24000.4 VERIFICATION METHODS AND TOOLS A BOEING MILITARY
PS-INDEX-ADDENDUM-12
CONVERSION INDEX DOUGLAS AIRCRAFT COMPANY AND MCDONNELL AIRCRAFT COMPANY
SPECIFICATIONS FOR DOUGLAS AIRCRAFT PROGRAMS AND WORK DIVERSION USE U BOEING MILITARY
QTM 71-3111 CASTABLE SILICONE RUBBER MATERIAL SPEC A BOEING MILITARY
QTM 71-3111 CASTABLE SILICONE RUBBER MATERIAL SPEC B BOEING MILITARY
SRP1001 TAPERED METAL REPAIR STOCK P BOEING MILITARY
SRP1002 SHEET METAL REPAIR STOCK T BOEING MILITARY
SRP1003 METAL ANGLE REPAIR STOCK P BOEING MILITARY
SRP1004 COMPOSITE SHIM REPAIR STOCK J BOEING MILITARY
SRP1100 BLEND AND TRIM – SH METAL EXT AND CHEM-MILLED K BOEING MILITARY
SRP1101 BLENDING AND TRIMMING – MACHINED PARTS J BOEING MILITARY
SRP1103 PRESS-FIT BUSHING REPAIR FOR HOLES AC BOEING MILITARY
SRP1104 BUSHING REPAIR FOR HOLES IN COMPOSITES BONDED L BOEING MILITARY
SRP1105 BOND FIT ACRYL BUSH REP FOR ELONG AND MISLOCA F BOEING MILITARY
SRP1107 WELD REJECTIONS – TITANIUM K BOEING MILITARY
SRP1108 HEAT TREATMENT OF ALUMINUM ALLOYS J BOEING MILITARY
SRP1109 WELD REJECTIONS – ALUMINUM J BOEING MILITARY
SRP1110 METAL MATER AND PARTS WARPAGE BENT BOW COND S G BOEING MILITARY
SRP1111 GEN REPAIR OF ASSEM NONCONFORM SHEET METAL AN C BOEING MILITARY
SRP1112 THREADED HOLE REPAIR INSERT INSTALLATION G BOEING MILITARY
SRP1115 WELD REJECTIONS – STAINLESS STEEL F BOEING MILITARY
SRP1117 OVERSIZE BLUEPRINTSTANDARD BUSHING INSTALLATI L BOEING MILITARY
SRP1405 COMP MAT REPAIR OF MINOR SURFACE DEFECTS J BOEING MILITARY
SRP1406 NONCONFORM IN ALU HONEYCOMB CORE J BOEING MILITARY
SRP1410 DAMAGED SILICONE RUBBER CUFFS BELLOWS G BOEING MILITARY
SRP1800 MISCELLANEOUS FASTENER NONCONFORMANCES J BOEING MILITARY
SRP1801 CAN CONDITIONS IN SKINS AND WEBS K BOEING MILITARY
SRP1802 INTERFERENCE COND – SH METAL PARTS AND EXT L BOEING MILITARY
SRP1803 REPLACEMENT OF SYSTEM BRACKETS AND CLIPS H BOEING MILITARY
SRP1804 MISLOCATED SEAL GROOVE HOLE F BOEING MILITARY
SRP1805 INTERFERENCE CONDITIONS – MACHINED PARTS L BOEING MILITARY
SRP1806 OPTICAL SURFACE RESTORATION F BOEING MILITARY
SRP1807 REPAIR OF 6M62 CUTOUTS F BOEING MILITARY
SRP1809 MISCELLANEOUS FASTENER NONCONFORMANCES C BOEING MILITARY
SRP2001 SHIMS SPECIAL LAMINATED A BOEING MILITARY
SRP2103 PRESS-FIT BUSHING REPAIR FOR MOLDLINE SKIN AN J BOEING MILITARY
SRP2800 OVERSIZE HOLESFASTENERS N BOEING MILITARY
SRP2801 SHIM INSTALLATION H BOEING MILITARY
SRP2802 MISLOC FAST HOLES IN SH MET MACHINE PART EXT F BOEING MILITARY
SRP2803 MISLOCATED FASTENER HOLES IN CARBONEPOXY ASSE F BOEING MILITARY
SRP2804 SHEET METAL DAMAGE – SKINS AND WEBS F BOEING MILITARY
SRP2805 FLANGE DAMAGE SHEET METAL D BOEING MILITARY
SRP2807 FLANGE DAMAGE CRACK IN RADIUS E BOEING MILITARY
SRP2808 DAMAGED HOLES SHORT EDGE DISTANCE IN FLANGES G BOEING MILITARY
SRP2809 FLANGE DAMAGE TAB E BOEING MILITARY
SRP2810 JOGGLES-DAMAGED INCORRECT E BOEING MILITARY
SRP2811 DAMAGED STIFFENING FLANGES FOR CUTOUTS F BOEING MILITARY
SRP2812 MOLDLINE SURFACE QUALITY G BOEING MILITARY
SRP2813 AFT FUSELAGE FRAME – LONGERON CLIP REPAIR REP E BOEING MILITARY
SRP2818 HOLE SHORT EDGE DIST TO CHEM MACH LANDS BET F C BOEING MILITARY
SRP2820 NONCONFORMING RAMP LATCH TORQUE TUBE HOLES CA G BOEING MILITARY
SRP2851 INSULATION BLANKETS AND COVERING MATERIALS E BOEING MILITARY
SRP3800 OVERSIZE HOLES FASTENERS K BOEING MILITARY
SRP3801 SHIMMING GAPS WITH METAL SHIM H BOEING MILITARY
SRP3802 MISLOCATED FASTENER HOLES IN SHEET METAL D BOEING MILITARY
SRP3812 MOLDLINE SURFACE QUALITY G BOEING MILITARY
SRP4800 OVERSIZED HOLES FASTENERS M BOEING MILITARY
SRP4801 SHIMMING GAPS G BOEING MILITARY
SRP4802 MISLOCA FAST HOLES IN SH METAL ASSEMB J BOEING MILITARY
SRP4807 DAMAGED/DISPLACED NUT ELEMENTS,WING SKIN REPAIR J BOEING MILITARY
SRP4808 BUSHING REPAIR FOR REMOVABLE COMPOSITE COVERS G BOEING MILITARY
SRP5401 DELAM NONCONFORMANCES IN COMPOSITE LAMINATES D BOEING MILITARY
SRP5800 OVERSIZE HOLES FASTENERS J BOEING MILITARY
SRP5801 SHIM INSTALLATION F BOEING MILITARY
SRP5802 PLUGGING HOLES IN SHEET METAL AND COMPOSITE F BOEING MILITARY
SRP5812 MOLD LINE QUALITY G BOEING MILITARY
SRP6400 DENT REPAI FOR FORW AND LOW AFT BOX OF VERT T F BOEING MILITARY
SRP6802 MISLOCATED FASTENER HOLES F BOEING MILITARY
SRP6802 STANDARD REPAIR PROCEDURE F BOEING MILITARY
SRP6815 REPAIR OF SUPERPLASTIC FORMED (SPF) AND SUPERPLASTIC FORMED/DIFFUSION BONDED
(SPF/DB) PARTS 5/
E BOEING MILITARY
SRP6851 MISLOCATED GUIDE PIN HOLE REPAIR D BOEING MILITARY
SRP8800 OVERSIZE HOLES FASTENERS W BOEING MILITARY
SRP8805 FLANGE DAMAGE, SHEET METAL E BOEING MILITARY
SRP8807 DAMAGED DISPLACED NUT ELE WING SKIN REPAIR FA F BOEING MILITARY
SRP8808 SHIMS SPECIAL E BOEING MILITARY
SRP8809 SHIMS SPECIAL – CRUCIFORM SPLICE Y326 500 B BOEING MILITARY
SRP8812 MOLDLINE QUALITY B BOEING MILITARY
SRP8813 UNBOND DELAM NONCOMFORM IN COMP LAMINATES T E A BOEING MILITARY
SRP8814 CANOPY TRANSPARENCY FLOWCOAT REPAIR NEW BOEING MILITARY
SRP8820 LOST PART SERIAL OF FRAC CRIT (FC) AND MAINT E BOEING MILITARY
ST3M1067 FASTENER – BLIND, INTERNAL THREAD, 100 HEA M BOEING MILITARY
ST3M1068 FASTENER – BLIND, INTERNAL THREAD, PROTRUDI L BOEING MILITARY
ST3M352 PIN – RIVET, THREADED, TAPERED, SHEAR, 100 HE D BOEING MILITARY
ST3M39 PIN-FLAT HEAD, HIGH TEMPERATURE YH BOEING MILITARY
ST3M433 NUT, SELF-LOCKING, PLATE-TWO LUG FLOATING, E BOEING MILITARY
ST3M436 NUT – SELF-LOCKING, DOUBLE HEX, CRES, DRY FIL M BOEING MILITARY
ST3M446 CLIP – NUT RETAINING, GANG CHANNEL AND PLATE V BOEING MILITARY
ST3M453 BOLT, CLOSE TOLERANCE – DOUBLE HEX HEAD, CRE AD BOEING MILITARY
ST3M454 SCREW-CLOSE TOLERANCE, 100 DEG CSUNK, HI-TOR AG BOEING MILITARY
ST3M455 SCREW-CLOSE TOLERANCE, 100 DEG COUNTERSUNK, AK BOEING MILITARY
ST3M466 SCREW, CLOSE TOLERANCE – 100 DEG REDUCED HEA AE BOEING MILITARY
ST3M475 RETAINER- FLOATING BARREL NUT, CRES M BOEING MILITARY
ST3M483 NUT ASSEMBLEY, SELF-LOCKING, GANG CHANNEL W BOEING MILITARY
ST3M495 SCREW, CLOSE TOLERANCE-100 DEG COUNTERSUNK, K BOEING MILITARY
ST3M496 SCREW-CLOSE TOLERANCE, 100DEG DOVETAIL SLOT L BOEING MILITARY
ST3M497 BOLT – DOUBLE HEX HEAD, 0.0156 OVERSIZE, CRE V BOEING MILITARY
ST3M497REP BOLT – DOUBLE HEX HEAD, 0.0156 OVERSIZE, CRES (125 KSI FSU) ORG BOEING MILITARY
ST3M505 SCREW-CLOSE TOLERANCE, 1–DEG DOVETAIL SLOT HE K BOEING MILITARY
ST3M506 SCREW-CLOSE TOLERANCE, 100DEG COUNTERSUNK, DO N BOEING MILITARY
ST3M507 BOLT-DOUBLE HEX HEAD, 0.0312 OVERSIZE, CRES W BOEING MILITARY
ST3M524 NUT – 12 POINT, SHEAR, CASTELLATED, CRES NON L BOEING MILITARY
ST3M525 COLLAR – PIN, RIVET, THREADED, SELF-LOCKING, T BOEING MILITARY
ST3M557 SCREW-CLOSE TOLERANCE, 100DEG COUNTERSUNK, RE L BOEING MILITARY
ST3M571 BOLT – CLOSE TOLER, 12 POINT, FLANGE HEAD AA BOEING MILITARY
ST3M572 NUT-SELF-LOCKING, EXTRUDED WASHER, DEOUBLE HE L BOEING MILITARY
ST3M608 COLLAR- PIN, RIVET, THREADED, SELF-LOCKING, K BOEING MILITARY
ST3M612 NUT – DOUBLE HEX, CASTELLATED, CRES L BOEING MILITARY
ST3M652 SCREW, CLOSE TOLERANCE-ASSEMBLY, 100DEG C’SUN K BOEING MILITARY
ST3M653 SCREW, CLOSE TOLERANCE-ASSEMBLY, 100DEG C’SUN G BOEING MILITARY
ST3M713 SCREW, MACHINE-100DEG C’SUNK, DOVETAIL SLOT, E BOEING MILITARY
ST3M714 SCREW-CLOSE TOLERANCE, 100DEG C’SUNK DOVETAIL J BOEING MILITARY
ST3M719 NUT, SELF-LOCKING, PLATE- T BOEING MILITARY
ST3M729 BOLT, CLOSE TOLERANCE-DOUBLE HEX HEAD, CRES, F BOEING MILITARY
ST3M733 BOLT-100DEG COUNTERSUNK, DOVETAIL SLOT, CRES R BOEING MILITARY
ST3M744 BOLT -CLOSE TOLERANCE, SPLINE DRIVE, CRES (12 Y BOEING MILITARY
ST3M747 BOLT, CLOSE TOLERANCE, SPLINE DRIVE, CRES AA BOEING MILITARY
ST3M752 NUT-SELF-LOCKING, EXTRUDED WASHER, SPLINE H BOEING MILITARY
ST3M753 BOLD – CLOSE TOLERANCE, SPLINE DRIVE, FLANGE AB BOEING MILITARY
ST3M759 PIN – RIVET, THREADED, SHEAR, PROTRUDING HEAD, HEX POINT DRIVE AN BOEING MILITARY
ST3M760 PIN, RIVET, THREADED-TENSION, 100 DEGREES C’SUNK HEAD, HEX POINT DRIVE AL BOEING MILITARY
ST3M761 PIN, RIVET, THREADED, TENSION, PROTRUDING AE BOEING MILITARY
ST3M762 NUT, SELF-LOCKING, SPLINE-CRES, DRY FILM E BOEING MILITARY
ST3M781 FASTENER-BLIND, INTERNALLY THREADED, EXTERN AC BOEING MILITARY
ST3M782 FASTENER – BLIND, INTERNALLY THREADED, EXTERNAL SLEEVE, TITANIUM, FLUSH HEAD, SELFLOCKING
N BOEING MILITARY
ST3M787 NUT – SELF-LOCKING, TENSION, CASTELLATED, CRE K BOEING MILITARY
ST3M788 NUT SELF-LOCKING, SHEAR, CASTELLATED, CRES 45 J BOEING MILITARY
ST3M797 NUT – EXTENDED WASHER, SPLINE, CASTELLATED J BOEING MILITARY
ST3M807 BOLT, HEX HEAD, CLOSE TOLERANCE K BOEING MILITARY
ST3M814 PIN – RIVET, THREADED, TENSION, PROTRUDING HEAD, HEX POINT DRIVE, 0.0156 OVERSIZE, CRES
(125 KSI FSU)
M BOEING MILITARY
ST3M833 BOLD-SELF RETAINING, POSITIVE LOCKING, HEX H BOEING MILITARY
ST3M836 FASTENER – BLIND, INTERNALLY THREADED, EXTERAL SLEEVE, TITANIUM, REDUCED FLUSH HEAD,
SELF-LOCKING, 0.0156 OVERSIZE
K BOEING MILITARY
ST3M837 BOLT, SPLINE DRIVE, CRES (125 KSI FSU) G BOEING MILITARY
ST3M838 BOLT, SPLINE DRIVE, CRES G BOEING MILITARY
ST3M865 BOLT, MINIMUM HEAD, HEX RECESS, CRES, 125 KSI K BOEING MILITARY
ST4M147 CONTACT STRIP, ELECTRICAL BONDING – CORNER W BOEING MILITARY
ST4M212 BEARING, PLAIN, SELF-LUBRICATING, SELF ALIGNI F BOEING MILITARY
ST5M1223 LIGHT, LANDING R BOEING MILITARY
ST5M1243 RELAY, ARMATURE AF BOEING MILITARY
ST5M1269 SWITCH TOGGLE, SPDT, 2 AND 3 POSITION,ENVIRO N BOEING MILITARY
ST5M1285 E BACKSHELL – CONNECTOR, ELECTRICAL, EMI W BOEING MILITARY
ST5M1312 SWITCH, PRESSURE-ABSOLUTE AND GUAGE
U BOEING MILITARY
ST5M1326 RELAY-ARMATURE, HERMETICALLY SEALED DPDT
M BOEING MILITARY
ST5M1331 ADAPTER-TUBING TO ELECTRICAL CONNECTOR
E BOEING MILITARY
ST5M1333 CONNECTOR, COAXIAL, HN PLUGS, SOLDER TYPE
J BOEING MILITARY
ST5M1339 CABLE, REF-COAXIAL, 50 OHM
N BOEING MILITARY
ST5M1344 CONNECTOR, PLUG RECEPTACLE, ELECTRICAL AH BOEING MILITARY
ST5M1348 CONNECTOR, PLUG, ELECTRICAL – COAXIAL, AD BOEING MILITARY
ST5M1371 CLAMP, CABLE, ELECTRICAL CONNECTOR-STR
T BOEING MILITARY
ST5M1372 LIGHT, INDICATOR
F BOEING MILITARY
ST5M1374 TERMINAL BLOCK-STANDOFF, TURRET
D BOEING MILITARY
ST5M1378 SLEEVE
B BOEING MILITARY
ST5M1383 TERMINAL, LUG, CRIMP STYLE, UNINSULATED
F BOEING MILITARY
ST5M1396 CONNECTOR-COAX, PLUG, TNC, PRECISION, POLARI
K BOEING MILITARY
ST5M1412 INSULATOR BUSHING, SIMICONDUCTOR DEVICE
B BOEING MILITARY
ST5M1414 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHEL AG BOEING MILITARY
ST5M1417 CONNECTOR, COAZIAL, RADIO FREQUENCY-THREADED
N BOEING MILITARY
ST5M1418 CAP, PROTECTIVE, ELECTRICAL CONNECTOR
K BOEING MILITARY
ST5M1439 CONNECTOR, PLUG, ELECTRICAL
H BOEING MILITARY
ST5M1444 SWITCH-ROTARY, 4 POLE, 16 POSITION, LOW CURR
D BOEING MILITARY
ST5M1445 SWITCH – ROTARY, 2 POLE, 8 POSITION, LOW CUR
C BOEING MILITARY
ST5M1468 KNOBS- CONCENTRIC, ILLUMINATED
H BOEING MILITARY
ST5M1469 SWITCH – ROTARY, 1 POLE, 5 POSITION, – PUSH
F BOEING MILITARY
ST5M1488 CONTACT, ELECTRICAL CONNECTOR, CRIMP REMOVAB
L BOEING MILITARY
ST5M1517 SWITCH, PUSHBUTTON, ILLUMINATED MONETARY AN BOEING MILITARY
ST5M1582 FLOODLIGHT, ELECTRIC-BUSHING MOUNT
F BOEING MILITARY
ST5M1654 SWITCH, PLUNGER, 2PDT, LOW LEVEL TO 5 AMP, E AF BOEING MILITARY
ST7M1138 HOSE ASSEMBLY, HIGH TEMPERATURE, LOW PRESSU
A BOEING MILITARY
ST7M169 FERRULE – TUBE, FLEXIBLE FLUID COUPLING
J BOEING MILITARY
ST7M175 RING – BACKUP, O-RING STATIC FACE SEAL
A BOEING MILITARY
ST7M190 SLEEVE – TUBE COUPLING, EXTERNALLY SWAGED
U BOEING MILITARY
ST7M191 COUPLING ASSEMBLY- HALF, FLEXIBLE FLUID LINE
M BOEING MILITARY
ST7M197 FERRULE – TUBE, BUTT WELD FLEXIBLE FLUID C
H BOEING MILITARY
ST7M204 ELBOW TUBE-45, SWIVEL NUT (BEAM SEAL)
H BOEING MILITARY
ST7M212 ELBOW-REDUCER, BULKHEAD 90 DEGREE DYNAMIC
E BOEING MILITARY
ST7M214 ELBOW, TUBE
J BOEING MILITARY
ST7M217 TEE
J BOEING MILITARY
ST7M224 ELBOW, TUBE-60 , SWIVEL NUT (BEAM SEAL)
J BOEING MILITARY
ST7M227 TEE, TUBE-REDUCER, THREE SWIVEL NUTS
L BOEING MILITARY
ST7M250 PLUG FLUID FITTING, BEAM SEAL
L BOEING MILITARY
ST7M254 PACKING ASSEMBLY – PREFORMED TEE SECTION, OD
J BOEING MILITARY
ST7M271 COUPLING, CLAMP – SHEET METAL FLANGE, SAFETY
M BOEING MILITARY
ST7M272 COUPLING, V-BAND-NO. 10 T-BOLT
N BOEING MILITARY
ST7M277 FERRULE, GROOVED CLAMP COUPLING
U BOEING MILITARY
ST7M291 COUPLING HALF, QUICK DISCONNECT
M BOEING MILITARY
ST7M344 PLUG-STOWAGE, FOR CRU-60P HOSE ASSEMB
A BOEING MILITARY
ST7M362 GAUGE, PRESSURE- DIAL INDICATING, 0-5000 PSI
E BOEING MILITARY
ST7M389 SLEEVE, SEAL, COUPLER
D BOEING MILITARY
ST7M393 CONNECTOR TUBE COUPLING,BEAM SEAL TO MALE FL
G BOEING MILITARY
ST7M400 ADAPTER STRAIGHT TUBE TO BOSS-FLUID CONNECTIO
F BOEING MILITARY
ST7M402 UNION- WELDING, CRES TUBE
J BOEING MILITARY
ST7M405 FERRULE-TUBE, FLEXIBLE FLUID COUPLING
J BOEING MILITARY
ST7M414 VALVE-ON OFF, TOGGLE, OXYGEN
L BOEING MILITARY
ST7M428 HOSE ASSEMBLY, NON-METALLIC-HIGH PRESSURE
D BOEING MILITARY
ST7M452 NUT ASSEMBLY, COUPLING
K BOEING MILITARY
ST7M464 COUPLING, CLAMP, GROOVED-V-BAND, SWIVEL JOINT
F BOEING MILITARY
ST9M387 PLATE, IDENTIFICATION – MODIFICATION DATA
J BOEING MILITARY
ST9M389 TAPE, ID-FLUID LINE COLOR CODED AB BOEING MILITARY
ST9M390 CLAMP-HOSE, FLAT BAND
G BOEING MILITARY
ST9M402 CASTER-BALL, CORROSION RESISTANT STEEL
A BOEING MILITARY
ST9M425 MOUNT, RESILIENT-VIBRATION, LIGHT LOAD
G BOEING MILITARY
ST9M437 STRAP, RETAINING – BARE METAL, 2 HOLE MOUNT
D BOEING MILITARY
ST9M446 STRAP ASSEMBLY – QUICK COUPLER, LOOP ENDS
M BOEING MILITARY
ST9M468 LATCH ASSEMBLY FLUSH, DEEP OFFSET
M BOEING MILITARY
ST9M470 MOUNT, RESILIENT-HELICAL ISOLATOR
J BOEING MILITARY
ST9M504 LUG ASSEMBLY – BAND CLAMP, 10 – 32
E BOEING MILITARY
ST9M506 PLATE
C BOEING MILITARY
ST9M514 PLATE, DESIGNATION ASSEMBLY SERIALIZATION
F BOEING MILITARY
ST9M517 FASTENER – STUD, QUARTER TURN
D BOEING MILITARY
ST9M553 PIN, QUICK RELEASE
K BOEING MILITARY
ST9M558 STRAP, TETAINING – CUSHIONED, TUBE SUPPORT
H BOEING MILITARY
ST9M559 STRAP, TIEDOWN, PLASTIC.
K BOEING MILITARY
ST9M571 RECEPTACLE-TURNLOCK FASTENER, ANGLE MOUNTING
P BOEING MILITARY
ST9M583 MOUNT RESILIENT
C BOEING MILITARY
ST9M588 CLAMP, LOOP- CUSHIONED, INTEGRAL LOCK
V BOEING MILITARY
ST9M594 BALL SEGMENT-LINE SUPPORT BLOCK
J BOEING MILITARY
ST9M597 COMBINATION, ALUMINUM AT BOEING MILITARY
ST9M626 MOUNT, SESILIENT-VIBRATION, LIGHT LOAD, FUEL
M BOEING MILITARY
ST9M634 PLATE-IDENTIFICATION, AIRPLANE
D BOEING MILITARY
ST9M880 GROMMET, NON-METALLIC – HEAT SHRINKABLE
E BOEING MILITARY
STF0101 FINISH IINSTRUCTION
B BOEING MILITARY
STF0103 FINISH INSTRUCTION
B BOEING MILITARY
STF0110 FINISH INSTRUCTION
B BOEING MILITARY
STF0118 FINISH INSTRUCTION
B BOEING MILITARY
STF0160 FINISH INSTRUCTION EO BOEING MILITARY
STF0174 FINISH INSTRUCTION EO BOEING MILITARY
STF0175 FINISH INSTRUCTION EO BOEING MILITARY
STF0325 FINISH INSTRUCTION
A BOEING MILITARY
STF0361 FINISH INSTRUCTION
A BOEING MILITARY
STF0704 FINISH INSTRUCTION EO BOEING MILITARY
STF1001 STF1001 FINISH INSTRUCTION
F BOEING MILITARY
STF1002 FINISH INSTRUCTION
F BOEING MILITARY
STF1003 STF1003 FINISH INSTRUCTION
J BOEING MILITARY
STF1004 FINISH INSTRUCTION
J BOEING MILITARY
STF1006 FINISH INSTRUCTION
E BOEING MILITARY
STF1007 FINISH INSTRUCTION
D BOEING MILITARY
STF1010 FINISH INSTRUCTION
B BOEING MILITARY
STF1015 FINISH INSTRUCTION
E BOEING MILITARY
STF1016 STF1016 FINISH INSTRUCTION

• BOEING MILITARY
  STF1037 FINISH INSTRUCTION
  D BOEING MILITARY
  STF1038 FINISH INSTRUCTION
  H BOEING MILITARY
  STF1039 FINISH INSTRUCTION
  F BOEING MILITARY
  STF1051 FINISH INSTRUCTION
  A BOEING MILITARY
  STF1062 FINISH INSTRUCTION
  D BOEING MILITARY
  STF1065 FINISH INSTRUCTION
  A BOEING MILITARY
  STF1066 FINISH STANDARD
  A BOEING MILITARY
  STF1201 STF1201 FINISH INSTRUCTION
  E BOEING MILITARY
  STF1205 STF1205 FINISH INSTRUCTION
  D BOEING MILITARY
  STF1302 FINISH INSTRUCTION
  E BOEING MILITARY
  STF1304 STF1304 FINISH INSTRUCTIOIN
  E BOEING MILITARY
  STF1307 FINISH INSTRUCTION ORG BOEING MILITARY
  STF1502 FINISH INSTRUCTION
  B BOEING MILITARY
  STF1503 FINISH INSTRUCTION
  G BOEING MILITARY
  STF1504 FINISH INSTRUCTION
  B BOEING MILITARY
  STF1511 FINISH INSTRUCTION
  F BOEING MILITARY
  STF1514 FINISH INSTRUCTION
  E BOEING MILITARY
  STF1516 STF1516 FINISH INSTRUCTION 29-Nov-05 BOEING MILITARY
  STF1604 FINISH INSTRUCTION B BOEING MILITARY
  STF1607 FINISH INSTRUCTION E BOEING MILITARY
  STF1612 FINISH INSTRUCTION E BOEING MILITARY
  STF1617 FINISH INSTRUCTION A BOEING MILITARY
  STF1619 FINISH INSTRUCTION B BOEING MILITARY
  STF1706 STF1706 FINISH INSTRUCTION P BOEING MILITARY
  STF1709 FINISH INSTRUCTION K BOEING MILITARY
  STF1716 FINISH INSTRUCTIONS B BOEING MILITARY
  STF1724 FINISH INSTRUCTION F BOEING MILITARY
  STF1727 STF1727 FINISH INSTRUCTION D BOEING MILITARY
  STF1742 FINISH INSTRUCTION E BOEING MILITARY
  STF1743 STF1743 FINISH INSTRUCTION B BOEING MILITARY
  STF1750 FINISH INSTRUCTION B BOEING MILITARY
  STF1751 FINISH INSTRUCTION A BOEING MILITARY
  STF1757 FINISH INSTRUCTION F BOEING MILITARY
  STF1758 FINISH INSTRUCTION E BOEING MILITARY
  XBMS7-395-01 NITINOL ALLOY BAR, PLATE, SHEET, TUBE AND WIRE ORG BOEING MILITARY
  CP000081 Calibration procedure CP000081 F-71 2.0 GKN INTERNAL
  GMS-ADHE-0002 MATERIAL SPECIFICATION RTM6 EPOXY RESIN G GKN INTERNAL
  GMS-ADHE-0002 A MATERIAL SPECIFICATION RTM6 EPOXY RESIN ATTACHMENT A GKN INTERNAL
  GMS-ADHE-0003 MATERIAL SPECIFICATION HPO3 BINDER B GKN INTERNAL
  GMS-ADHE-0004 EPOXY ADHESIVES FOR STRUCTURAL BOND, MATERIAL SPECIFICATION A** GKN INTERNAL
  GMS-COMP-0005 MATERIAL SPECIFICATION WOVEN GRAPHITE FABRIC C SPECIFICATIONS GKN INTERNAL
  GMS-COMP-0006 MATERIAL SPECIFICATION FOR BRAIDED GRAPHITE FILLER A GKN INTERNAL
  GMS-COMP-0007 CARBON AND FIBERGLASS EPOXY PREPREG, 977-3 RESIN A** GKN INTERNAL
  GMS-WELD-0001 CONSUMABLE MATERIALS FOR WELDING PROCESSES F SPECIFICATIONS GKN INTERNAL
  GPS-ASSY-0001 ADHESIVE DEFLASH USING CORN STARCH MEDIA B GKN INTERNAL
  GPS-ASSY-0002 GRIT BLAST OF METAL AND COMPOSITE PARTS B GKN INTERNAL
  GPS-ASSY-0003 SHOT PEENING G GKN INTERNAL
  GPS-ASSY-0003 (a) Shot Peen: Equipment / Safety Daily PM B GKN INTERNAL
  GPS-ASSY-0003 (b) Shot Peen: Equipment / Safety Daily PM Completion Log A GKN INTERNAL
  GPS-CLEN-0001 CLEANING, DESCALING & SURFACE PREP OF TITANIUM ALLOYS F GKN INTERNAL
  GPS-CLEN-0002 CLEANING OF ALUMINUM DETAIL PARTS FOR ADHESIVE BONDING F GKN INTERNAL
  GPS-CLEN-0003 CLEANING AND PRIMING OF TITANIUIM DETAIL PARTS FOR ADHESIVE E GKN INTERNAL
  GPS-CLEN-0004 CLEANING, ALKALINE E GKN INTERNAL
  GPS-CLEN-0005 PICKLING ALUMINUM ALLOYS F GKN INTERNAL
  GPS-CLEN-0007 CLEANING, SOLVENT VAPOR DEGREASING C GKN INTERNAL
  GPS-CLEN-0009 RTWI – 92220-013 SOLVENT CLEANING B GKN INTERNAL
  GPS-CLEN-0010 AUTOMATED TITANIUM LINE (BUILDING 1) – OPERATING PLAN AND PROCEDURES J GKN INTERNAL
  GPS-CORR-0001 APPLICATION OF FUEL TANK COATINGS G GKN INTERNAL
  GPS-CORR-0002 APPLICATION OF PAINT COATINGS J GKN INTERNAL
  GPS-CORR-0003 COATING, MULTICOLORED CHEMICAL CONVERSION COATING OF ALUMINU B GKN INTERNAL
  GPS-CORR-0005 CONVERSION COATING – BRUSH AND SPRAY A GKN INTERNAL
  GPS-CORR-0006 ANODIZING, ALUMINUM ALLOYS E GKN INTERNAL
  GPS-CORR-0008 APPLICATION OF SOL-GEL CONVERSION COATING ON TITANIUM C GKN INTERNAL
  GPS-EREQ-0001 PYROMETRY REQUIREMENTS FOR THERMAL PROCESSING EQUIPMENT S GKN INTERNAL
  GPS-FABR-0001 FABRICATION AND ACCEPTANCE OF CARBON FIBER REINFORCED EPOXY A GKN INTERNAL
  GPS-FABR-0002 FIBER PLACEMENT OF CARBON/EPOXY LAMINATES C GKN INTERNAL
  GPS-FABR-0003 ROTATIONAL MOLDING OF NYLON C GKN INTERNAL
  GPS-FABR-0005 PROCESS IMPLEMENTING PROCEDURES FOR BOEING-ST.LOUIS REV A A GKN INTERNAL
  GPS-FABR-0006 LAMINATES, REINFORCED PLASTIC, FABRICATION OF B GKN INTERNAL
  GPS-FABR-0007 CARBON/EPOXY, LAMINATES, FABRI AND ACCEPTANCE OF FOR BOEING C GKN INTERNAL
  GPS-FABR-0008 CARBON FIBER BISMALEIMIDE LAMINATES, FABR AND ACCEPT OF B GKN INTERNAL
  GPS-FABR-0009 FABRICATION AND ACCEPTANCE OF CARBON FIBER REINFORCED TOUGHENED EPOXY (NET
  RESIN) LAMINATES
  C GKN INTERNAL
  GPS-FABR-0011 SANDWICH MAT’L, HONEYCOMB CORE, CARBON SKINS, FABRICATION OF A GKN INTERNAL
  GPS-FABR-0012 HEAT AND CORROSION RESISTANT ALUMINUM SANDWICH ASSEMBLIES A GKN INTERNAL
  GPS-FABR-0013 FAB, PROCUREMENT AND ACCPT OF CORR RESIST ALUM SAND ASSY B GKN INTERNAL
  GPS-FABR-0014 COBONDING CARBON/EPOXY PREPREGS, ALUMINUM HONEYCOMB CORE, A GKN INTERNAL
  GPS-FABR-0015 ADHESIVE BONDING OF COMPOSITE STRUCTURE B GKN INTERNAL
  GPS-HEAT-0006 BMI RESIN POST-CURE OVEN D GKN INTERNAL
  GPS-IDNT-0001 DOT PEEN MARKING OF METAL PARTS A GKN INTERNAL
  GPS-SEAL-0001 LIQUID SHIMMING OF AIRCRAFT ASSEMBLIES D GKN INTERNAL
  GPS-SHOP-0001 AREA REQUIREMENTS FOR COMPOSITE FAB & ADHESIVE BONDING AD* GKN INTERNAL
  GPS-SHOP-0001 (D) Boeing Consumable Material Control Plan D GKN INTERNAL
  GPS-SHOP-0001 (E) CCA ROOM MAINTENANCE PERMIT A GKN INTERNAL
  GPS-SHOP-0001 (F) Composites Layup CCA Housekeeping Checklist E GKN INTERNAL
  GPS-SHOP-0001 (G) DAILY CLEANING CHECKLIST OPERATOR SCHEDULE C GKN INTERNAL
  GPS-SHOP-0001 (H) Environmentally Monitored Area Housekeeping Checklist C* SPECIFICATIONS GKN INTERNAL
  GPS-SHOP-0001 (J) General Plant Appearance Standards A SPECIFICATIONS GKN INTERNAL
  GPS-SHOP-0001 (K) CLEAN ROOM TOOL PRE-ENTRY CHECKLIST A SPECIFICATIONS GKN INTERNAL
  GPS-SHOP-0001 (L) AGFM Ply Cutter Housekeeping Checklist B SPECIFICATIONS GKN INTERNAL
  GPS-TEST-0001 ACCEPTANCE, REINSPECTION, & STORAGE OF C/E, G/E & ADHESIVES B SPECIFICATIONS GKN INTERNAL
  GPS-TEST-0005 WATER BREAK PROCEDURE C GKN INTERNAL
  GPS-TEST-0006 ROCKWELL HARDNESS AND ROCKWELL SUPERFICIAL HARDNESS TESTING N GKN INTERNAL
  GPS-TEST-0006 A HARDNESS & CONDUCTIVITY PRACTICAL EXAM A GKN INTERNAL
  GPS-TEST-0006 B HARDNESS TEST BLOCK SURVEILLANCE A GKN INTERNAL
  GPS-TEST-0006 C HARDNESS & CONDUCTIVITY VERIFICATION LOG SURVEILLANCE A GKN INTERNAL
  GPS-TEST-0007 ELECTRICAL CONDUCTIVITY TESTING REQUIREMENTS I GKN INTERNAL
  GPS-TEST-0008 CALIBRATION REQUIREMENTS FOR MEASUREMENT & TEST EQUIP D GKN INTERNAL
  GPS-TEST-0009 TUBING PROOF TESTING B GKN INTERNAL
  GPS-WELD-0001 GENERAL PRODUCTION ARC FUSION WELDING I GKN INTERNAL
  GPS-WELD-0001 A WELDING INSPECTION WHITE LIGHT INTENSITY LOG B GKN INTERNAL
  GPS-WELD-0002 GENERAL PRODUCTION RESISTANCE WELDING F GKN INTERNAL
  GPS-WELD-0003 GENERAL PRODUCTION TORCH BRAZING F GKN INTERNAL
  GPS-WELD-0004 GENERAL PRODUCTION ELECTRON BEAM WELDING E GKN INTERNAL
  GPS-WELD-0004 A GPS-WELD-0004, E B WELD CHAMBER CLEANING LOG A GKN INTERNAL
  M05003 BMI TACKIFIED FABRIC, WOVEN S-2 GLASS FIBER A GKN INTERNAL
  M05004 BMI POWDER TACKIFIED FABRIC, WOVEN CARBON FIBER – IM-7 FOUR A GKN INTERNAL
  M05005 BMI POWDER TACKIFIED FABRIC,HYBRID,WOVEN CARBON AND E GLASS A GKN INTERNAL
  M05005-01 CUSTOMER FURNISHED IM-7 FABRIC,98/2 WEAVE TACKIFIED WITH BMI A GKN INTERNAL
  M05006 BMI POWDER TACKIFIED FABRIC, WOVEN CARBON FIBER 75/25 C GKN INTERNAL
  M27003 TACKIFIER, 5250-4 BISMALEIMIDE B GKN INTERNAL
  2PYA00002-0003 JSF TEAMMATE PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION 0002 LOCKHEED MARTIN
  2ZZA00010C INTERCHANGEABLE-REPLACEABLE PROCESS REQUIREMENTS LOCKHEED MARTIN
  2ZZA05002 APPROVED MATERIALS FOR F-35 FRACTURE CRICTICAL AND MAINTENAN C LOCKHEED MARTIN
  2ZZP00001 FINISH SPECIFICATION FOR F-35 WEAPONS SYSTEM C LOCKHEED MARTIN
  2ZZP00002 MANUFACTURE AND QUALITY CONTROL OF JSF NON-SPECIFIC PART FAM AMENDMENT 2 LOCKHEED MARTIN
  2ZZP00003 ENGINEERING REQUIREMENTS FOR MACHINED PARTS G LOCKHEED MARTIN
  2ZZP00004-002 MANUFACTURE AND QUALITY CONTROL OF JSF NON-SPECIFIC PART FAM 3 AMENDMENT LOCKHEED MARTIN
  2ZZP00005 DRILLING AND MACHINING OF COMPOSITE AND COMPOSITE/METAL STAC A LOCKHEED MARTIN
  2ZZP00006 CONTROL OF F35 AIR VEHICLE CRITICAL PARTS, GENERAL SPECIFICA G* LOCKHEED MARTIN
  2ZZP00008 MARKING SPECIFICATION FOR JSF AIRCRAFT AND SUPPORT EQUIPMENT G LOCKHEED MARTIN
  2ZZP00008 MARKING SPECIFICATION FOR JSF AIRCRAFT AND SUPPORT EQUIPMENT 1 AMENDMENT LOCKHEED MARTIN
  2ZZP00009 INTEGRAL FUEL TANK SEALING – JSF B LOCKHEED MARTIN
  2ZZP00010 ELECTRICAL BONDING, F-35 AMENDMENT 3 LOCKHEED MARTIN
  2ZZP00017 ENVIRONMENTAL AND PRESSURE SEALING, AIRCRAFT A LOCKHEED MARTIN
  2ZZP00044 RECTIFICATION OF DISTORTION IN MACHINED,METALLIC, DETAIL COM LOCKHEED MARTIN
  2ZZP00052 THREAD ROLLING OF STEEL AND TITANIUM ALLOY COMPONENTS LOCKHEED MARTIN
  2ZZP00055 F-35 FLIGHT SCIENCE CRITICAL PARTS GENERAL SPECIFICATION FOR A LOCKHEED MARTIN
  2ZZZ00001 SYNTACTIC FILM. EPOXY B LOCKHEED MARTIN
  2ZZZ00005 COMPOSITE PLY PREPREG, BMI RESIN B LOCKHEED MARTIN
  2ZZZ00017 FILLED ELASTOMERIC SEALS, SPACERS AND GASKETS AMENDMENT 4 LOCKHEED MARTIN
  2ZZZ00017 FILLED ELASTOMERIC SEALS AND GASKETS 1 ANNEX LOCKHEED MARTIN
  5HY03303 CRITERIA, SURFACE WAVINESS (U) A LOCKHEED MARTIN
  5PC00012 NONDESTRUCTIVE INSPECTION PLAN E LOCKHEED MARTIN
  5PC00837-03 STRUCTURAL DEVELOPMENT TEST REPORT-COMPOSITE BOLTED JJOINT A NEW LOCKHEED MARTIN
  5PC00837-11 FA22 STRUCTURAL DEVELOPMENT TESTS GENERIC TEST RESULTS AND E NEW LOCKHEED MARTIN
  5PC00840-29 F22 STRUCTURAL DEVELOPMENT TESTS CENTER FUSELAGE ELEMENTS AN NEW LOCKHEED MARTIN
  5PC01286 F22 PRODUCTION PROGRAM NDI PLAN A LOCKHEED MARTIN
  5PD00020 CONFIGURATION MANAGEMENT REQUIREMENTS DOCUMENT (CMRD) FOR SU F LOCKHEED MARTIN
  5PD00025 VRP PLAN DIFFERENCES C LOCKHEED MARTIN
  5PD00040 TRI-TEAM F-22 AIR VEHICLE INTERCHANGEABILITY AND REPLACEABIL F LOCKHEED MARTIN
  5PD00078 F22 STRUCTURAL DEVELOPMENT TEST PROCEDURES FOR METALLIC COUP NEW LOCKHEED MARTIN
  5PD00083 SUPPLIER QUALITY ASSURANCE REQUIREMENTS FOR MIL-I-45208A SUP B LOCKHEED MARTIN
  5PD00119 F22 DEPOT AUTOMATIC TEST SYSTEM REQUIREMENTS DOCUMENTS LOCKHEED MARTIN
  5PD00202 TEST PLAN TO QUALIFY COMPOSITE MATERIALS TO F22 PROGRAM A LOCKHEED MARTIN
  5PD00334 QUALIFICATION PLAN TO QUALIFY RTM VENDORS FOR F-22 PROGRAM LOCKHEED MARTIN
  5PD00519 F22 AIRFRAME REPAIR DEVELOPMENT PLAN D LOCKHEED MARTIN
  5PD00553 ANALYSIS OF BERYLLIUM AND BERYLLIUM ALLOY APPLICATIONS OF TH NEW LOCKHEED MARTIN
  5PD00753 5PD00753H INTERCHANGEABILITY AND REPLACEABILITY REQUIREMENTS H LOCKHEED MARTIN
  5PD00845 F/A-22 COMPOSITE PARTS SUPPLIER QUALIFICATION PLAN E LOCKHEED MARTIN
  5PD01019 F22 AIRCRAFT STRUCTURAL CONFIGURATION FOR SPECIFIED MAINTENA K LOCKHEED MARTIN
  5PD01024 CYTEC FIBERITE 5PTMAT10 QUALIFICATION REPORT: –PREPREG LINE NEW LOCKHEED MARTIN
  5PD01069 ALTERNATE PURCHASER ACCEPTANCE PLAN FOR COMPOSITE MATERIALS J LOCKHEED MARTIN
  5PD01119 FA22 BASELINE VENTILATION AND DRAINAGE PATHWAYS SUMMARY DOCU A LOCKHEED MARTIN
  5PD01122 FA22 MAJOR MATE JOINT GAP AND MISMATCH REQUIREMENTS NEW LOCKHEED MARTIN
  5PD01255 F-22 CONTROL SURFACES GAP AND MISMATCH REQUIREMENTS L LOCKHEED MARTIN
  5PD01314 F-22 5HW01702 HORIZONTAL STABILATOR DELIVERABLE ALLOWABLE PR A LOCKHEED MARTIN
  5PD01536 INSPECTION PROCEDURE AND ACCEPTANCE CRITERIA FOR CANOPY LATC NEW LOCKHEED MARTIN
  5PD40457 CORRECTIVE ACTION AND DISPOSITION PROCESS FOR NONCONFORMING A LOCKHEED MARTIN
  5PD40745 SUMMARY LISTING OF FA22 APPROVED SUBSTITUTIONS LOCKHEED MARTIN
  5PD40835 AUTHORIZED MATERIAL SUBSTITUTIONS FOR USE ON THE F22 AIRCRAF R LOCKHEED MARTIN
  5PD41207 INSTRUCTIONS FOR MANUFACTURE OF WIRE HARNESSES FOR F-22 PROG F LOCKHEED MARTIN
  5PD41244 SIGNATURE SHEET FOR ENGINEERING MANUFACTURING DEVELOPMENT PR D LOCKHEED MARTIN
  5PD41325 FASTNER HOLES IN METAL STRUCTURE FOR AMAD ACCESS PANEL, SPEC NEW LOCKHEED MARTIN
  5PD41327 ORDER OF PRECEDENCE OF CONTROL MEDIA FOR THE F22 C LOCKHEED MARTIN
  5PD41351 ASSEMBLY PROCESS AND INTERNAL LRU WIRING SPECIFICATION OF TH A LOCKHEED MARTIN
  5PD41489 REVISED TEST PLAN FOR THE F22 MID FUSELAGE FUEL SEAL VERIFIC NEW LOCKHEED MARTIN
  5PD41528 F22 MIDFUSELAGE GAP AND MISMATCH REQUIREMENTS V LOCKHEED MARTIN
  5PD41739 F22 MID FUSELAGE FUEL SEAL VERIFICATION COMPONENT POST TEST NEW LOCKHEED MARTIN
  5PD41784 FA-22 WELDING SCHEDULES F LOCKHEED MARTIN
  5PD41946 PARTS-CONTROL NUMBERS AND IDENTIFICATION OF ALTERNATE SOURCE B LOCKHEED MARTIN
  5PD42045 F22 DATA RELEASE RECORD A LOCKHEED MARTIN
  5PD42081 TEST PLAN FOR QUALIFICATION TO 5PTMCG05 NEW LOCKHEED MARTIN
  5PD42174 F/A-22 EMD MIDFUSELAGE NEW LOCKHEED MARTIN
  5PD42207 BAGGING PROCEDURES FOR F22 COMPOSITE PARTS & BONDED ASSEMBLI F LOCKHEED MARTIN
  5PD42221 FA22 WORKMANSHIP STANDARD NEW LOCKHEED MARTIN
  5PD42222 F/A-22 INTERCHANGEABLE ALTERABLE PROCEDURES NEW LOCKHEED MARTIN
  5PD42289 ITEM UNIGUE IDENTIFICATION DIRECTIONS FOR LOT 6 IMPLEMENTATI A LOCKHEED MARTIN
  5PD42355 DIMENSIONAL REQUIREMENTS FOR TITANIUM FORGINGS FOR FRACTURE/ LOCKHEED MARTIN
  5PD42781 ACCEPTANCE PLAN FOR PRESHAPED BAGGING KITS FOR THE F-22 PROG A LOCKHEED MARTIN
  5PD42866 F-22 MID FUSELAGE STRUCTURES RETROFIT PROGRAM 2 (SRP 2) NDI A LOCKHEED MARTIN
  5PTA0003 PARTS, MATERIALS, PROCESSES AND STANDARDS USED IN SUPPLIER D C LOCKHEED MARTIN
  5PTA0015 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (EEE) REQUIREMENTS FOR C LOCKHEED MARTIN
  5PTA0046 ELECTRICAL BONDING REQUIREMENTS FOR THE F-22 AIRFRAME ELECTR B LOCKHEED MARTIN
  5PTA3124 F-22 SPECIFICATION FINISHES, COATINGS AND SEALANTS FOR THE P D LOCKHEED MARTIN
  5PTA3125 F-22 STANDARD MATERIALS AND PROCESS FOR CORROSION PREVENTION D LOCKHEED MARTIN
  5PTA3148 CRITICAL ITEM DEVELOPMENT SPECIFICATION FOR FLEXIBLE COUPLIN B LOCKHEED MARTIN
  5PTA3361 GUN SYSTEM INSTALLATION PROCEDURES A LOCKHEED MARTIN
  5PTC1001 SHIM, LAMINATED D LOCKHEED MARTIN
  5PTC1018 WASHER, COUNTERSUNK C LOCKHEED MARTIN
  5PTM1T01 WIRE, ELECTRICAL, FLUOROCARBON POLYIMIDE INSULATED, COPPER O D LOCKHEED MARTIN
  5PTM1T01 WIRE, ELECTRICAL, FLUOROCARBON POLYIMIDE INSULATED, COPPER O QPL 2 LOCKHEED MARTIN
  5PTM1T02 CABLE, FIBER OPTICS, GENERAL SPECIFICATION FOR C LOCKHEED MARTIN
  5PTM1T02 CABLE, FIBER OPTICS, GENERAL SPECIFICATION FOR QPL 2 LOCKHEED MARTIN
  5PTM1T03 CABLE, POWER, ELECTRICAL AND CABLE SPECIAL PURPOSE, ELECTRIC D LOCKHEED MARTIN
  5PTM1T03 CABLE, POWER, ELECTRICAL AND CABLE SPECIAL PURPOSE, ELECTRIC QPL 3 LOCKHEED MARTIN
  5PTM1T04 F/A-22 DATA BUS CABLE E LOCKHEED MARTIN
  5PTM1T04 F/A-22 DATA BUS CABLE QPL 2 LOCKHEED MARTIN
  5PTM1T05 WIRE, ELECTRICAL, EXTRUDED CROSS-LINKED ETHYLENETETRAFLUOROE C LOCKHEED MARTIN
  5PTM1T05 WIRE, ELECTRICAL, EXTRUDED CROSS-LINKED ETHYLENETETRAFLUOROE QPL LOCKHEED MARTIN
  5PTM1T06 INSTRUMENTATION MULTI-CONDUCTOR CABLE NEW LOCKHEED MARTIN
  5PTM1T07 INSTRUMENTATION CAIS BUS TWINAXIAL CABLE NEW LOCKHEED MARTIN
  5PTM1T08 INSTRUMENTATION COAXIAL CABLE NEW LOCKHEED MARTIN
  5PTM1T09 INSTRUMENTATION THERMOCOUPLE CABLE NEW LOCKHEED MARTIN
  5PTM1T10 BRAID, WIRE, TUBULAR, NICKEL COATED NEW LOCKHEED MARTIN
  5PTM1T11 OPTICAL FIBERM, BUFFERED GENERAL SPECIFICATION FOR F-22 AVIONICS LINE RMOVALBE
  MODULES (LRM)
  A LOCKHEED MARTIN
  5PTM3T01 TITANIUM ALLOY CASTINGS TI 6AL-4V VACUUM MELTED, INVESTMENT, G LOCKHEED MARTIN
  5PTM3T02 ALUMINUM BERYLLIUM ALLOY 363, INVESTMENT CASTINGS NEW LOCKHEED MARTIN
  5PTM4G10 ALUMINUM ALLOY EXTRUDED SHAPES B LOCKHEED MARTIN
  5PTM4L02 7050-T6511 OR 7050-O EXTRUSIONS A LOCKHEED MARTIN
  5PTM4T01 ALUMINUM BERYLLIUM EXTRUSIONS A LOCKHEED MARTIN
  5PTM4T02 TITANIUM ALLOY EXTRUSIONS, TI-6AL-4V, BETA PROCESSED AND ANN LOCKHEED MARTIN
  5PTM5L01 ALUMINUM ALLOY FORGINGS 7050-01, HIGH TEMPERATURE ANNEALED NEW LOCKHEED MARTIN
  5PTM5T01 TITANIUM ALLOY FORGINGS, DAMAGE, TOLERANT, TI-6AL-2SN-2ZR-2M AMENDMENT 3 LOCKHEED MARTIN
  5PTM5T04 TITANIUM ALLOY FORGINGS, DAMAGE TOLERANT GRADE, TI-6AL-4V (E B LOCKHEED MARTIN
  5PTM6T01 ALLOY BARS, CORROSION RESISTANT, 20CR-35NI-35CO-10, WITH CO NEW LOCKHEED MARTIN
  5PTM7G08 ALUMINUM ALLOY PLATE, 2124-T8151 FRACTURE TOUGHNESS TESTED D LOCKHEED MARTIN
  5PTM7G09 ALUMINUM ALLOY PLATE, 2121-T851 FRACTURE TOUGHNESS TESTED B LOCKHEED MARTIN
  5PTM7G22 2024-T3, -T81, -T351, -T851 ALUMINUM SHEET AND PLATE, CHEMIC A LOCKHEED MARTIN
  5PTM7G26 BERYLLIUM-BERYLLIUM OXIDE CONSTRAINING CORE A LOCKHEED MARTIN
  5PTM7T01 TITANIUM ALLOY PLATE, DAMAGE TOLERANT GRADE, TI-6AL-2SN-2ZR-2MO-2CR-.015SI ELI B LOCKHEED MARTIN
  5PTM7T02 TITANIUM ALLOY SHEET, DAMAGE TOLERANT GRADE TI-6AL-2SN-2ZR-2 NEW LOCKHEED MARTIN
  5PTM7T03 TITANIUM ALLOY PLATE, DAMAGE TOLERANT GRADE, TI-6AL-4V (ELI), BETA ANNEALED B-A01 LOCKHEED MARTIN
  5PTM7T07 ALUMINUM ALLOY PLATE, 2124-T8151 FRACTURE TOUGHNESS TESTED NEW LOCKHEED MARTIN
  5PTM7T08 ALUMINUM ALLOY PLATE, 7050-T7451 FRACTURE TOUGHNESS TESTED A-A02 LOCKHEED MARTIN
  5PTM7T10 AL-BE MET TM AM162, SHEET PLATE A LOCKHEED MARTIN
  5PTM7T13 7475-O ALUMINUM ALLOY SHEET AND PLATE C-A01 LOCKHEED MARTIN
  5PTM8G01 TUBING, TITANIUM, WELDED LOCKHEED MARTIN
  5PTM8L02 TUBING, TITANIUM, WELDED LOCKHEED MARTIN
  5PTM9T01 TITANIUM ALLOY WELD WIRE, TI-6AI 2SN-2ZR-2MO-2CR(ELI) A LOCKHEED MARTIN
  5PTMAT01 TAPE, CARBON FIBER, BISMALEIMIDE RESIN IMPREGNATED, FOR PRIMARY AIRCRAFT STRUCTURE G LOCKHEED MARTIN
  5PTMAT02 TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR PRIMARY AIR H LOCKHEED MARTIN
  5PTMAT02 TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR PRIMARY AIR QPL 2 LOCKHEED MARTIN
  5PTMAT03 TAPE, CARBON FIBER, DRY THERMOPLASTIC RESIN IMPREGNATED, FOR E LOCKHEED MARTIN
  5PTMAT04 TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR AIRCRAFT ST F LOCKHEED MARTIN
  5PTMAT04 TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR AIRCRAFT ST QPL 2 LOCKHEED MARTIN
  5PTMAT05 BIAXIAL TAPE, DRY THERMOPLASTIC RESIN IMPREGNATED, FOR 300F D LOCKHEED MARTIN
  5PTMAT08 TAPE, CARBON FIBER EPOXY RESIN IMPREGNATED, FOR RTM APPLICAT A LOCKHEED MARTIN
  5PTMAT08 TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED FOR RTM APPLICAT QPL 1 LOCKHEED MARTIN
  5PTMAT09 NARROW WIDTH EPOXY IMPREGNATED CARBON FIBER TOW TAPE E LOCKHEED MARTIN
  5PTMAT09 NARROW WIDTH EPOXY IMPREGNATED CARBON FIBER TOW TAPE QPL 2 LOCKHEED MARTIN
  5PTMAT10 UNIDIRECTIONAL CARBON FIBER REINFORCED THERMOPLASTIC PREPREG B LOCKHEED MARTIN
  5PTMAT11 BIAXIAL CARBON FIBER REINFORCED THERMOPLASTIC PREPREG A LOCKHEED MARTIN
  5PTMAT11 BIAXIAL CARBON FIBER REINFORCED THERMOPLASTIC PREPREG QPL 1 LOCKHEED MARTIN
  5PTMAT12 TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR STRUCTURAL A LOCKHEED MARTIN
  5PTMAT12 TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR STRUCTURAL QPL LOCKHEED MARTIN
  5PTMBL02 GLASS FABRIC, PREIMPREGNATED, EPOXY RESIN B LOCKHEED MARTIN
  5PTMBL04 PREPREG, QUARTZ FABRIC, CYANATE ESTER RESIN, FOR 300F SERVIC A LOCKHEED MARTIN
  5PTMBL05 PREPREG, E GLASS FABRIC, CYANATE ESTER RESIN, FOR 300F SERVI A LOCKHEED MARTIN
  5PTMBT01 FABRIC, CARBON FIBER, WOVEN, BISMALEIMIDE RESIN IMPRENATED F H LOCKHEED MARTIN
  5PTMBT01 FABRIC, CARBON FIBER, WOVEN, BISMALEIMIDE RESIN IMPRENATED F QPL 2 LOCKHEED MARTIN
  5PTMBT02 FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN IMPREGNATED, FOR PR G LOCKHEED MARTIN
  5PTMBT02 FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN IMPREGNATED, FOR PR QPL 3 LOCKHEED MARTIN
  5PTMBT04 PREPREG, S-2 GLASS FABRIC, WOVEN BISMALEIMIDE RESIN IMPREGNA D LOCKHEED MARTIN
  5PTMBT04 PREPREG, S-2 GLASS FABRIC, WOVEN BISMALEIMIDE RESIN IMPREGNA QPL 2 LOCKHEED MARTIN
  5PTMBT05 PREPREG, E-GLASS FABRIC,WOVEN BISMALEIMIDE RESIN IMPREGNATED E LOCKHEED MARTIN
  5PTMBT05 PREPREG, E-GLASS FABRIC,WOVEN BISMALEIMIDE RESIN IMPREGNATED QPL LOCKHEED MARTIN
  5PTMBT06 PREPREG, WOVEN FABRIC, BISMALEIMIDE RESIN IMPREGNATED, FOR U H LOCKHEED MARTIN
  5PTMBT06 PREPREG, WOVEN FABRIC, BISMALEIMIDE RESIN IMPREGNATED, FOR U QPL 3 LOCKHEED MARTIN
  5PTMBT07 PREPREG, E GLASS FABRIC, WOVEN EPOXY RESIN IMPREGNATED, FOR E LOCKHEED MARTIN
  5PTMBT07 PREPREG, E GLASS FABRIC, WOVEN EPOXY RESIN IMPREGNATED, FOR QPL LOCKHEED MARTIN
  5PTMBT08 PREPREG, WOVEN FABRIC, EPOXY RESIN IMPREGNATED, FOR USE AS A H LOCKHEED MARTIN
  5PTMBT08 PREPREG, WOVEN FABRIC, EPOXY RESIN IMPREGNATED, FOR USE AS A QPL 2 LOCKHEED MARTIN
  5PTMBT09 PREPREG, E GLASS FABRIC POLYMIDE RESIN IMPREGNATED, 500F SER C LOCKHEED MARTIN
  5PTMBT10 PREPREG, GRAPHITE FABRIC AND COPPER MESH, BISMALEIMIDE RESIN IMPREGNATED, FOR
  LIGHTING PROTECTION
  B-A01 LOCKHEED MARTIN
  5PTMBT11 PREPREG, GRAPHITE FARIC ANDCOPPER MESH, EPOXY RESIN IMPREGNATED A-A01 LOCKHEED MARTIN
  5PTMBT12 FABRIC, CARBON FIBER, WOVEN, BISMALEIMIDE RESIN TACKIFIED FO B LOCKHEED MARTIN
  5PTMBT12 FABRIC, CARBON FIBER, WOVEN, BISMALEIMIDE RESIN TACKIFIED FO QPL 4 LOCKHEED MARTIN
  5PTMBT13 FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN TACKIFIED FOR RESIN A LOCKHEED MARTIN
  5PTMBT13 FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN TACKIFIED FOR RESIN QPL 2 LOCKHEED MARTIN
  5PTMBT14 FABRIC, CARBON FIBER, WOVEN EPOXY RESIN IMPREGNATED, FOR STR A LOCKHEED MARTIN
  5PTMBT14 FABRIC, CARBON FIBER, WOVEN EPOXY RESIN IMPREGNATED, FOR STR QPL LOCKHEED MARTIN
  5PTMBT15 FABRIC, S-2 GLASS, WOVEN EPOXY RESIN IMPREGNATED, FOR STRUCT A LOCKHEED MARTIN
  5PTMBT15 FABRIC, S-2 GLASS, WOVEN EPOXY RESIN IMPREGNATED, FOR STRUCT QPL LOCKHEED MARTIN
  5PTMCG05 DRY CARBON UNI-TAPE FOR RTM APPLICATIONS LOCKHEED MARTIN
  5PTMCL01 CARBON Z-PIN PREFORMS FOR THROUGH THE THICKNESS REINFORCEMEN LOCKHEED MARTIN
  5PTMCT01 CARBON Z-PIN PREFORMS FOR THROUGH THE THICKNESS REINFORCEMEN E LOCKHEED MARTIN
  5PTMCT01 CARBON Z-PIN PREFORMS FOR THROUGH THE THICKNESS REINFORCEMEN QPL 14 LOCKHEED MARTIN
  5PTMCT02 FIBER, SILICON CARBIDE QPL 2 LOCKHEED MARTIN
  5PTMCT02 FIBER, SILICON CARBIDE D LOCKHEED MARTIN
  5PTMCT03 FABRIC, S-2 GLASS FOR STRUCTURAL COMPOSITES D-A02 LOCKHEED MARTIN
  5PTMCT04 RANDOM CARBON FIBER MAT-DRY A LOCKHEED MARTIN
  5PTMCT04 RANDOM CARBON FIBER MAT-DRY QPL LOCKHEED MARTIN
  5PTMCT05 BRAIDED CARBON FIBER ROPE LOCKHEED MARTIN
  5PTMDG02 FLEXIBLE 5052 ALLOY ALUMINUM HONEYCOMB CORE B LOCKHEED MARTIN
  5PTMDG10 ALUMINUM HONEYCOMB CORE MATERIAL-5052 ALLOY CORROSION RESIST A LOCKHEED MARTIN
  5PTMDG13 HONEYCOMB CORE, ARAMID FIBER REINFORCED PHENOLIC LOCKHEED MARTIN
  5PTMDG19 ADHESIVE FILM COMPOUND, PRIMARY SPLICE MATERIAL FOR HONEYCOM A LOCKHEED MARTIN
  5PTMDG22 GLASS REINFORCED PHENOLIC HONEYCOMB CORE A LOCKHEED MARTIN
  5PTMDG28 Structural Adhesive, 250°F Cure Temperature, Controlled Flow Metal-to-Metal and Composite
  Applications
  C-A01 LOCKHEED MARTIN
  5PTMDL10 CORE MATERIALS H-A02 LOCKHEED MARTIN
  5PTMDL12 CORE, HONEYCOMB, ARAMID FIBER, PHENOLIC RESIN B LOCKHEED MARTIN
  5PTMDL13 CORE, SYNTACTIC, CYANATE ESTER, FOR 300 SERVICE A LOCKHEED MARTIN
  5PTMDL15 CORE MATERIAL, SYNTACTIC, CYANATE ESTER, 250F STAGING, 350F A LOCKHEED MARTIN
  5PTMDL16 CORE, HONEYCOMB, CARBON FIBER, POLYIMIDE RESIN A LOCKHEED MARTIN
  5PTMDL17 CORE, HONEYCOMB, HIGH MODULUS ARAMID PAPER, PHENOLIC COATED E LOCKHEED MARTIN
  5PTMDL17 CORE, HONEYCOMB, HIGH MODULUS ARAMID PAPER, PHENOLIC COATED QPL 1 LOCKHEED MARTIN
  5PTMDT01 CORE, HONEYCOMB, ALUMINUM ENHANCED CORROSION RESISTANCE C LOCKHEED MARTIN
  5PTMDT01 CORE, HONEYCOMB, ALUMINUM ENHANCED CORROSION RESISTANCE QPL 1 LOCKHEED MARTIN
  5PTMDT02 BMI FOAMING CORE SPLICE ADHESIVE B LOCKHEED MARTIN
  5PTMDT02 BMI FOAMING CORE SPLICE ADHESIVE QPL 2 LOCKHEED MARTIN
  5PTMDT04 ADHESIVE, THERMOPLASTIC FILM C LOCKHEED MARTIN
  5PTMDT05 CORE, HONEYCOMB, ALUMINUM (5052) ENHANCED CORROSION RESISTAN C LOCKHEED MARTIN
  5PTMDT05 CORE, HONEYCOMB, ALUMINUM (5052) ENHANCED CORROSION RESISTAN QPL 1 LOCKHEED MARTIN
  5PTMEG21 SYNTHETIC RUBBER SHEET A01 LOCKHEED MARTIN
  5PTMEG24 LOW AND HIGH TEMP AND TEAR RESISTANT SILICONE RUBBER A LOCKHEED MARTIN
  5PTMEG32 SILICONE HEAT SINK COMPOUND A LOCKHEED MARTIN
  5PTMEG71 CLOSED CELL SILICONE SPONGE SHEET LOCKHEED MARTIN
  5PTMEL01 RUBBER, SILICONE, TEMPERATURE AND TEAR RESISTANT A LOCKHEED MARTIN
  5PTMEL02 RUBBER, FLUOROSILICONE, SHEET, MOLDED AND EXTRUDED LOCKHEED MARTIN
  5PTMEL03 RUBBER SHEET, MOLDED AND EXTRUDED M-A02 LOCKHEED MARTIN
  5PTMEL04 POLYETHER URETHANE, MOLDED A LOCKHEED MARTIN
  5PTMEL04 POLYETHER URETHANE, MOLDED QPL LOCKHEED MARTIN
  5PTMFG00 POLYIMIDE FILM TAPE, ADHESIVE BACKED LOCKHEED MARTIN
  5PTMFG11 NYLON HOOK AND PILE FASTENER TAPE LOCKHEED MARTIN
  5PTMFG13 INSULATION TEDLAR TAPE LOCKHEED MARTIN
  5PTMFG14 DOUBLE BACKED ADHESIVE TAPE A LOCKHEED MARTIN
  5PTMFG15 NON-STRUCTURAL, MEDIUM TACK, ADHESIVE FILM C LOCKHEED MARTIN
  5PTMFG47 ADHESIVE BACKED ALUMINUM FOIL TAPE A LOCKHEED MARTIN
  5PTMFG53 OIL AND HYDRAULIC FLUID RESISTANT ADHESIVE BACKED TEFLON TAP C LOCKHEED MARTIN
  5PTMFG67 SILICONE AND ACRYLIC ADHESIVE TEFLON TAPE LOCKHEED MARTIN
  5PTMFG69 WHITE ELECTRICAL HARNESS MARKING TAPE LOCKHEED MARTIN
  5PTMFG70 PRESSURE SENSITIVE SILICONE ADHESIVE GLASS CLOTH LOCKHEED MARTIN
  5PTMFG71 POLYTETRAFLUOROETHYLENE SPIRAL WRAP TUBING LOCKHEED MARTIN
  5PTMFG74 Electrical Identification Tape B-A01 LOCKHEED MARTIN
  5PTMFG84 UNSUPPORTED SELF ADHESIVE CILICONE TAPE LOCKHEED MARTIN
  5PTMFG89 ELECTRICAL LACING TAPE A LOCKHEED MARTIN
  5PTMFG92 PRESSURE SENSITIVE ADHESIVE POLYESTER FILM INDENTIFICATION T A LOCKHEED MARTIN
  5PTMFG93 PRESSURE SENSITIVE ADHESIVE OVERLAMINATE POLYESTER FILM TAPE C LOCKHEED MARTIN
  5PTMFG94 COLOR CODED PRESSURE SENSITIVE ADHESIVE IDENDTIFICATION TAPE B LOCKHEED MARTIN
  5PTMFG98 QUARTZ CLOTH TAPE LOCKHEED MARTIN
  5PTMFL02 DECALCOMANIA, HIGH HEAT RESISTANCE, OPERATIONS UP To 1000f LOCKHEED MARTIN
  5PTMFL04 FASTENER TAPE, HOOK AND PILE, FIRE RETARDANT A LOCKHEED MARTIN
  5PTMFT01 PRESSURE SENSITIVE ADHESIVE POLYESTER FILM IDENTIFICATION TAPE A-A02 LOCKHEED MARTIN
  5PTMFT02 PRESSURE SENSITVIE ADHESIVE OVERLAMINATE POLYESTER FILM TAPE A-A03 LOCKHEED MARTIN
  5PTMFT03 COLOR CODED PRESSURE SENSITIVE ADHESIVE TUBE IDENTIFICATION TAPE A-V02 LOCKHEED MARTIN
  5PTMGG00 NYLON CLOTH NEW LOCKHEED MARTIN
  5PTMGG04 WOVEN TEXTILE NYLON WEBBING NEW LOCKHEED MARTIN
  5PTMGG09 HIGH TEMP SILICONE COATED NYLON FABRIC LOCKHEED MARTIN
  5PTMGG15 GLASS CLOTH C LOCKHEED MARTIN
  5PTMGG55 TAPE AND CLOTH GLASS FABRIC A LOCKHEED MARTIN
  5PTMGG67 CACRON POLYESTER FABRIC NEW LOCKHEED MARTIN
  5PTMJG02 CERAMIC FIBER INSULATION NEW LOCKHEED MARTIN
  5PTMJG19 CLOSED CELL VINYL FOAM NEW LOCKHEED MARTIN
  5PTMJG21 FLEXIBLE POLYURETHANE FOAM A LOCKHEED MARTIN
  5PTMJG25 FLEXIBLE THERMAL BLANKET INSULATION C LOCKHEED MARTIN
  5PTMJG31 HEAT SHRINKABLE ELECTRICAL IDENTIFICATION TAPE LOCKHEED MARTIN
  5PTMJG45 PREFORMED CERAMIC THERMAL INSULATION LOCKHEED MARTIN
  5PTMJG81 HEAT SHRINKABLE TUBING WITH ADHESIVE LOCKHEED MARTIN
  5PTMJT02 FOAM, POLYURETHANE, FLEXIBLE LOCKHEED MARTIN
  5PTMKG01 POLYETHERIMIDE MOLDING RESIN LOCKHEED MARTIN
  5PTMKG36 LAMINATED ABS SHEET LOCKHEED MARTIN
  5PTMKG50 POLYAMIDE IMIDE SHEET, ROD, AND PELLET A LOCKHEED MARTIN
  5PTMKG53 MOLYBDENUM DISULFIDE FILLED NYLON SHEET AND ROD A LOCKHEED MARTIN
  5PTMKG58 LAMINATED PHENOLIC SHEET, COTTON FABRIC BASE LOCKHEED MARTIN
  5PTMKG64 POLYPHENYLENE SULFIDE SHEET ROD AND PELLET LOCKHEED MARTIN
  5PTMKG85 NYLON SHEET AND ROD LOCKHEED MARTIN
  5PTMKL09 POLYCARBONATE SHEET, TRANSPARENT, STRUCTURAL B LOCKHEED MARTIN
  5PTMKL10 THERMOPLASTICE SHEET, POLYCARBONATE B LOCKHEED MARTIN
  5PTMKL13 FILM, PFA, SODIUM AMMONIA ETCHED B LOCKHEED MARTIN
  5PTMKL15 FILM, FLUOROPOLYMER, BONDABLE, HIGH DIELECTRIC STRENGTH A LOCKHEED MARTIN
  5PTMKL16 EXTRUDED MATERIALS F LOCKHEED MARTIN
  5PTMKL23 LOW DENSITY EXTRUDED MATERIALS A LOCKHEED MARTIN
  5PTMKT01 BISMALEIMIDE POTTING COMPOUND A LOCKHEED MARTIN
  5PTMKT01 BISMALEIMIDE POTTING COMPOUND QPL LOCKHEED MARTIN
  5PTMKT03 MOLDABLE PLASTIC SHIM B AMENDMENT 1 LOCKHEED MARTIN
  5PTMKT03 MOLDABLE PLASTIC SHIM B-A01 LOCKHEED MARTIN
  5PTMLG00 TWO PART EPOXY ADHESIVES FOR USE IN STRUCTURAL BONDING OR LA C LOCKHEED MARTIN
  5PTMLG02 INTERMEDIATE TEMP CURING TWO-PART EPOXY MATERIALS FOR USE AS LOCKHEED MARTIN
  5PTMLG03 RETAINING COMPOUNDS AND PRIMERS B LOCKHEED MARTIN
  5PTMLG53 COMPOUND, COMPRESSION MOLDING, GLASS FILLED EPOXY RESIN A LOCKHEED MARTIN
  5PTMLG68 HIGH PEEL, ROOM OR ELEVATED TEMP CURING EPOXY ADHESIVE B LOCKHEED MARTIN
  5PTMLG69 TWO PART EPOXY ADHESIVE FOR USE IN INTEGRAL FUEL TANK STRUC B LOCKHEED MARTIN
  5PTMLG69 TWO PART EPOXY ADHESIVE FOR USE IN INTEGRAL FUEL TANK STRUC QPL LOCKHEED MARTIN
  5PTMLG70 HIGH TEMPERATURE EPOXY PHENOLIC ADHESIVE LOCKHEED MARTIN
  5PTMLG75 FAST CURING ACRYLIC ADHESIVE A LOCKHEED MARTIN
  5PTMLG83 MODIFIED EPOXY PHENOLIC ADHESIVE FILM LOCKHEED MARTIN
  5PTMLL03 ADHESIVE-HONEYCOMB CORE SPLICING (250F AND 350F CURING) C-A01 LOCKHEED MARTIN
  5PTMLL07 ADHESIVE, EPOXY FILM, 350 DEG F CURE D LOCKHEED MARTIN
  5PTMLL07 ADHESIVE, EPOXY FILM, 350 DEG F CURE QPL 1 LOCKHEED MARTIN
  5PTMLL09 ADHESIVE, EPOXY FILM 250 DEGREE F CURE D LOCKHEED MARTIN
  5PTMLL09 ADHESIVE, EPOXY FILM 250 DEGREE F CURE QPL 1 LOCKHEED MARTIN
  5PTMLL11 ADHESIVE, EPOXY PASTE, TWO PART B LOCKHEED MARTIN
  5PTMLL16 PRIMER FOR SILICONE RUBBER, ROOM TEMP VULCANIZING, ADHESIVES A LOCKHEED MARTIN
  5PTMLL17 ADHESIVE-SEALING COMPOUND, ONE PART, ROOM TEMPERATURE VULCAN A LOCKHEED MARTIN
  5PTMLL18 ADHESIVE FILM, EPOXY, 250 F OR 350 F CURE, 250 F SERVICE A LOCKHEED MARTIN
  5PTMLL19 ADHESIVE FILM, CYANATE ESTER, 300 F SERVICE A LOCKHEED MARTIN
  5PTMLL20 CYANATE ESTER EXPANDED FOAM, 350 F A LOCKHEED MARTIN
  5PTMLL24 AQUEOUS ADHESIVE FOR METAL TO RUBBER LOCKHEED MARTIN
  5PTMLL25 ADHESIVE FILM, CYANATE ESTER, 250 F STAGING, 350 F CURE, 300 A LOCKHEED MARTIN
  5PTMLL27 EPOXY FILM ADHESIVE, LIGHT WEIGHT, 250 F CURE LOCKHEED MARTIN
  5PTMLT05 EPOXY RESIN AND TACKIFIER FOR RESIN TRANSFER MOLDED PARTS A LOCKHEED MARTIN
  5PTMLT05 EPOXY RESIN AND TACKIFIER FOR RESIN TRANSFER MOLDED PARTS QPL-1 LOCKHEED MARTIN
  5PTMLT06 BISMALEIMIDE RESIN AND TACKIFIER FOR RESIN TRANSFER MOLDED P E LOCKHEED MARTIN
  5PTMLT06 BISMALEIMIDE RESIN AND TACKIFIER FOR RESIN TRANSFER MOLDED P QPL-3 LOCKHEED MARTIN
  5PTMLT07 BISMALEIMIDE FILM ADHESIVE B LOCKHEED MARTIN
  5PTMLT07 BISMALEIMIDE FILM ADHESIVE QPL LOCKHEED MARTIN
  5PTMLT10 GRAPHITE MAT IMPREGNATION RESIN A LOCKHEED MARTIN
  5PTMLT11 ADHESIVE, SOLVENT THINNED, NON-STRUCTURAL, GENERAL PURPOSE LOCKHEED MARTIN
  5PTMMG01 THERMAL BARRIER COATING B LOCKHEED MARTIN
  5PTMMG40 ADHESION PROMOTER SOLVENT COMPOUND D LOCKHEED MARTIN
  5PTMNG04 GENERAL PURPOSE SOLVENT A LOCKHEED MARTIN
  5PTMNG89 ALKALINE DEGREASER LOCKHEED MARTIN
  5PTMNL01 CLEANER, ALKALINE, FOR ALUMINUM AND MAGNESIUM ALLOYS LOCKHEED MARTIN
  5PTMNL02 CLEANER, EMULSION LOCKHEED MARTIN
  5PTMNL03 ETCHANT, ALKALINE, FOR ALUMINUM ALLOYS LOCKHEED MARTIN
  5PTMNL04 CLEANER, ALKALINE, NON-ELECTROLYTIC LOCKHEED MARTIN
  5PTMNL05 CLEANER, ETCH, ALKALINE, FOR ALUMINUM AND ALUMINUM LOCKHEED MARTIN
  5PTMNL06 DEOXIDIZER, ACID TYPE, FOR ALUMINUM ALLOYS LOCKHEED MARTIN
  5PTMNL21 AQUEOUS CLEANER, FOR PRECISION CLEANING OF METAL PARTS LOCKHEED MARTIN
  5PTMNL22 AQUEOUS ALKALINE DEGREASER LOCKHEED MARTIN
  5PTMRA01 NONCHROMATED CORROSION INHIBITING SOLVENTBORNE PRIMER LOCKHEED MARTIN
  5PTMRG01 THIN FILM CERAMIC EPOXY COATING A LOCKHEED MARTIN
  5PTMRG27 TEFLON PIGMENTED COATINGS LOCKHEED MARTIN
  5PTMRG28 MOISTURE BARRIER COATING LOCKHEED MARTIN
  5PTMRG35 FLEXIBLE CORROSION INHIBITING PRIMER LOCKHEED MARTIN
  5PTMRG58 PRIMERS FOR SEALANTS LOCKHEED MARTIN
  5PTMRL02 COATING SYSTEM, RAIN EROSION AND FUNGUS RESISTANT, FOR AIRCR E LOCKHEED MARTIN
  5PTMRL15 COATING, INTERNAL, CANOPY LOCKHEED MARTIN
  5PTMRL16 COATINGS, METALLIC-CERAMIC C LOCKHEED MARTIN
  5PTMRL21 EXTERIOR POLYURETHANE COATINGS F LOCKHEED MARTIN
  5PTMRL23 HIGH TEMP PRIMER FOR EXTERIOR TOPCOAT B LOCKHEED MARTIN
  5PTMRL26 COATING, POLYIMIDE, HIGH DIELECTRIC STRENGTH A LOCKHEED MARTIN
  5PTMRL28 COATING, POLYURETHANE POLYCARBONATE-COMPATIBLE LOCKHEED MARTIN
  5PTMRL30 TEMP SIGNALING PAINT LOCKHEED MARTIN
  5PTMRL35 SINGLE COMPONENT WATER BASED POLYURETHANE TOPCOAT D LOCKHEED MARTIN
  5PTMRL40 ABRASION RESISTANT POLYURETHANE COATINGS, TEFLON FILLED B LOCKHEED MARTIN
  5PTMRL42 NON-CHROMATED FLEXIBLE PRIMER B LOCKHEED MARTIN
  5PTMRT03 MATERIAL SPEC LOW DENSITY WATERBORNE EPOXY PRIMER D LOCKHEED MARTIN
  5PTMRT03 MATERIAL SPEC LOW DENSITY WATERBORNE EPOXY PRIMER QPL-2 LOCKHEED MARTIN
  5PTMRT06 COATING, MOISTURE BARRIER AND ABRASION RESISTANT, FOR PROTEC A LOCKHEED MARTIN
  5PTMUG01 POLYTHIOETHER FILLER B LOCKHEED MARTIN
  5PTMUG04 FOAM, POLYURETHANE, FOAM IN PLACE, VOID FILLER B LOCKHEED MARTIN
  5PTMUG49 GENERAL PURPOSE ADHESIVES, POLSULFIDE RUBBER BASE A LOCKHEED MARTIN
  5PTMUG64 FAST, LOW TEMP CURING, POLYTHIOETHER INTEGRAL FUEL TANK SEAL B LOCKHEED MARTIN
  5PTMUT01 POLYSULFIDE SEALING CAPS FOR F-22 INTEGRAL FUEL TANK FASTENE A LOCKHEED MARTIN
  5PTMUT02 METALLIC FILLER A LOCKHEED MARTIN
  5PTMUT02 METALLIC FILLER QPL LOCKHEED MARTIN
  5PTMUT06 SEALANT, POLYSULFIDE, CORROSION RESISTANT LOCKHEED MARTIN
  5PTMUT06 SEALANT, POLYSULFIED, CORROSION RESISTANT QPL LOCKHEED MARTIN
  5PTMVL01 HAND CLEANING SOLVENTS, LOW VAPOR PRESSURE B LOCKHEED MARTIN
  5PTMVL01 QUALIFIED PRODUCTS LIST – HAND CLEANING SOLVENTS, LOW VAPOR QPL 3 LOCKHEED MARTIN
  5PTMWG01 THERMALLY CONDUCTIVE SILICONE RUBBER POTTING COMPOUND, FOR F LOCKHEED MARTIN
  5PTMWG02 ONE COMPONENT FREE FLOWING SYNTACTIC FOAM POWDER FOR F-22 AI LOCKHEED MARTIN
  5PTMWG03 THERMALLY CONDUCTIVE EPOXY ADHESIVE FOR BONDING F-22 AIM 9 P LOCKHEED MARTIN
  5PTMWG04 TWO PART EPOXY ADHESIVE FOR GENERAL PURPOSE BONDING F-22 AIM LOCKHEED MARTIN
  5PTMWG05 TWO PART EPOXY FOR USE AS A LAMINATING, POTTING OR CONFORMAL LOCKHEED MARTIN
  5PTMWG06 POLYURETHANE VARNISH FOR COATING F22 AIM 9 POWER SUPPLY COMP LOCKHEED MARTIN
  5PTMWG07 THERMALLY CONDUCTIVE PAD FOR F22 AIM 9 POWER SUPPLY COMPONEN LOCKHEED MARTIN
  5PTMWG08 ONE PART EPOXY ADHESIVE FOR GENERAL PURPOSE BONDING F-22 AIM LOCKHEED MARTIN
  5PTMYL01 HAZARDOUS MATERIALS CONTROL AND APPROVAL OF LOCKHEED MARTIN
  5PTMYL02 AUTHORIZRD MATERIAL SUB FOR USE ON THE F-22 AIRCRAFT AND GRO T LOCKHEED MARTIN
  5PTMYL03 APPROVED LM AERO FW MATERIALS FOR SUBSTITUTION OF LM AERO – LOCKHEED MARTIN
  5PTMYT00 LIMITED SUPPLIER DISTRIBUTION A LOCKHEED MARTIN
  5PTN0000 BACKSHELLS, CONNECTOR, ELECTRICAL C LOCKHEED MARTIN
  5PTPAG17 METAL REMOVAL ENGINEERING REQUIREMENTS D-A01 LOCKHEED MARTIN
  5PTPAG18 FORMING OF ALUMINUM ALLOYS, ENGINEERING AND INSPECTION REQUI C LOCKHEED MARTIN
  5PTPAG23 PROCESSING OF METAL TUBING A-A01 LOCKHEED MARTIN
  5PTPAG32 SHOT PEENING OF METAL PARTS, ENGINEERING AND INSPECTION REQU A LOCKHEED MARTIN
  5PTPAG35 SHEET AND EXTRUDED METAL FORMING TOLERANCES LOCKHEED MARTIN
  5PTPAG41 FORGING PROCESS, ENGINEERING AND INSPECTION REQUIREMENTS LOCKHEED MARTIN
  5PTPAG41 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPAG41 F QPL LOCKHEED MARTIN
  5PTPAG45 CASTINGS, AEROSPACE SUPPORT EQUIPMENT, ENGINEERINGAND INSPE NEW LOCKHEED MARTIN
  5PTPAG51 CHEMICAL MILLING OF METALS, ENGINEERING AND INSPECTION REQUIREMENTS A01 LOCKHEED MARTIN
  5PTPAG52 FORMING OF TITANIUM, ENGINEERING AND INSPECTION REQUIREMENTS E LOCKHEED MARTIN
  5PTPAG54 FORMING OF FERROUS AND NICKEL ALLOYS, ENGINEERING AND INSPEC A LOCKHEED MARTIN
  5PTPAG83 GLASS BEAD PEENING LOCKHEED MARTIN
  5PTPAG89 DRILLING/REAMING AND GRINDING OF HIGH STRENGTH STEEL AND GRI LOCKHEED MARTIN
  5PTPAG90 CASTINGS. AERPSPACE QUALITY, ENGINEERING AND INSPECTION REQU B LOCKHEED MARTIN
  5PTPAG90 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPAG90 F QPL LOCKHEED MARTIN
  5PTPAG91 SURFACE ROUGHNESS AND TOLERANCES FOR MACHINED SURFACES, ENGINEERING AND
  INSPECTION REQUIREMENTS
  C-A01 LOCKHEED MARTIN
  5PTPAL02 FORMING OF STRUCTURAL TUBING, REQUIREMENTS FOR A LOCKHEED MARTIN
  5PTPAL04 CHEMICAL MILLING OF ALUMINUM ALLOYS LOCKHEED MARTIN
  5PTPAL05 CHEMICAL MILLING OF LOW ALLOY STEELS, CORROSION AND HEAT RES LOCKHEED MARTIN
  5PTPAL06 CHEMICAL MILLING OF TITANIUM AND TITANIUM ALLOYS LOCKHEED MARTIN
  5PTPAL07 TUMBLE AND VIBRATORY DEBURRING OF AIRCRAFT PARTS LOCKHEED MARTIN
  5PTPAL08 SHOT PEENING OF METAL PARTS A LOCKHEED MARTIN
  5PTPAL09 STANDARD MACHINING PRACTICES, TOLERANCES, AND ALLOWANCES FOR J LOCKHEED MARTIN
  5PTPAL10 FABRICATION OF TITANIUM AND TITANIUM ALLOYS A LOCKHEED MARTIN
  5PTPAL11 PROCESSING OF TITANIUM AND TITANIUM ALLOY STRUCTURAL PARTS A LOCKHEED MARTIN
  5PTPAL12 HOLE PREPARATION IN LOW ALLOY HIGH STRENGTH STEEL A LOCKHEED MARTIN
  5PTPAL13 PROCESSING OF ALLOY STEELS BEFORE AND AFTER HEAT TREATMENT T LOCKHEED MARTIN
  5PTPAL14 PROCESSING OF PRECIPITATION HARDENING STAINLESS STEELS BEFOR C LOCKHEED MARTIN
  5PTPAL16 CARBON AND ALLOY STEELS, HEAT TREATMENT AND PROCESSING OF (B A LOCKHEED MARTIN
  5PTPAL18 HEATING OF BEARING HOUSING A LOCKHEED MARTIN
  5PTPAL21 HOT FORMING OF ALUMINUM ALLOY SHEET LOCKHEED MARTIN
  5PTPAL22 PROCESSING OF AUSTENITIC STAINLESS STEELS LOCKHEED MARTIN
  5PTPAT03 SUPERPLASTIC FORMING OF TITANIUM 6 ALUMINUM – 4 VANADIUM V02 LOCKHEED MARTIN
  5PTPAT05 ABRASIVE WATERJET PATTERN CUTTING OF TITANIUM SHEET, PLATE A B LOCKHEED MARTIN
  5PTPBA01 FASTENER REMOVAL USING THE EDM PROCESS A LOCKHEED MARTIN
  5PTPBG01 WIRE ROPE, SLEEVE SWAGING, EYE AND LAP SPLICE LOCKHEED MARTIN
  5PTPBG02 INSTALLATION OF TUBES AND HOSES C LOCKHEED MARTIN
  5PTPBG03 PROCESS SPECIFICATION FOR INSTALLATION OF HIGH TEMP INSULATI B LOCKHEED MARTIN
  5PTPBG04 INSTALLATION PROCEDURE FOR BONDED NUTPLATES N LOCKHEED MARTIN
  5PTPBG05 PROCESS SPECIFICATION FOR INSTALLATION OF HIGH TEMPERATURE, B LOCKHEED MARTIN
  5PTPBG06 INSTALLATION PROCEDURE FOR SWAGED GROMMETS A LOCKHEED MARTIN
  5PTPBG15 INSTALLATION PROCEDURE FOR CLAMPS B-A03 LOCKHEED MARTIN
  5PTPBG16 INSTALLATION PROCEDURE FOR RADIUS BLOCKS B LOCKHEED MARTIN
  5PTPBG19 F-22, MID-FUSELAGE FASTENER SEALING H LOCKHEED MARTIN
  5PTPBG20 APPLICATION OF LIQUID SHIM MATERIAL E LOCKHEED MARTIN
  5PTPBG28 COLD WORKING OF HOLES, ENGINEERING AND INSPECTION REQUIREMEN B LOCKHEED MARTIN
  5PTPBG28 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPBG28 FQPL LOCKHEED MARTIN
  5PTPBG76 FUEL TANK GROOVE INJECTION INSERT INSTALLATION LOCKHEED MARTIN
  5PTPBL09 FABRICATION AND INSTALLATION OF CABLE AND CONTROL TUBE ASSEM A LOCKHEED MARTIN
  5PTPBL11 INSTALLATION OF INTERFERENCE FIT BUSHINGS E LOCKHEED MARTIN
  5PTPBL12 FABRICATION AND ASSEMBLY OF CEQ WINDOWS A LOCKHEED MARTIN
  5PTPBL13 INSTALLATION OF PLUMBING LINES, F22 AIRCRAFT C LOCKHEED MARTIN
  5PTPBL15 SLEEVEBOLT SYSTEM, INSTALLATION OF A LOCKHEED MARTIN
  5PTPBL17 SLEEVE, OVERSIZE, INSTALLATION OF LOCKHEED MARTIN
  5PTPBT01 BOLT SCREW AND NUT INSTALLATION, GENERAL REQUIREMENTS FOR K LOCKHEED MARTIN
  5PTPBT04 FASTENER INSTALLATION, SOLID RIVETS, BLIND RIVETS, AND BLIND BOLTS J-A01 LOCKHEED MARTIN
  5PTPBT07 LOCKBOLTS, INSTALLATION OF C-A01 LOCKHEED MARTIN
  5PTPBT08 EDDIE BOLT SYSTEM, INSTALLATION OF G LOCKHEED MARTIN
  5PTPBT13 COUPLING INSTALLATION, FLEXIBLE D LOCKHEED MARTIN
  5PTPBT20 STRUCTURAL PANEL ASTENERS, INSTALLATION OF C-V03 LOCKHEED MARTIN
  5PTPBT23 INSTALLATION OF BEARINGS, ROLLER SWAGED AND ANVIL SWAGED A LOCKHEED MARTIN
  5PTPBT26 FASTENER INSTALLATION 100DEG FLUSH HEAD PIN WITH FLUSH SLEEVE B-A01 LOCKHEED MARTIN
  5PTPBT27 INSERT INSTALLATION, SCREW THREAD, M45932/1 AND M45932/3 A LOCKHEED MARTIN
  5PTPBT28 SPLIT SLEEVE COLD WORKING OF HOLES IN METALLICS A LOCKHEED MARTIN
  5PTPBT29 INSTALLATION OF EXPANDED BUSHINGS, METALLIC STRUCTURES B LOCKHEED MARTIN
  5PTPBT36 TORQUE REQUIREMENTS FOR INSTALLATION OF FASTENER AND OTHER APPLICATION V11 LOCKHEED MARTIN
  5PTPBT38 THERMAL DETECTOR UNIT HANDLING AND INSTALLATION A LOCKHEED MARTIN
  5PTPBT40 INSTALLATION OF FASTENER PROTRUDING HEAD PIN WITH PROTRUDING LOCKHEED MARTIN
  5PTPBT41 RUE PINS, INSTALLATION OF A LOCKHEED MARTIN
  5PTPCB13 TEMPER INSPECTION OF ALUMINUM ALLOYS C LOCKHEED MARTIN
  5PTPCG01 REQUIREMENTS FOR ULTRASONIC INSPECTION PROCEDURES FOR BONDED AND COMPOSITE
  STRUCTURES
  C LOCKHEED MARTIN
  5PTPCG02 REQUIREMENTS FOR EDDY CURRENT INSPECTION PROCEDURES LOCKHEED MARTIN
  5PTPCG05 REQUIREMENTS FOR RADIOGRAPHIC INSPECTION PROCEDURES FOR META B LOCKHEED MARTIN
  5PTPCG06 REQUIREMENTS FOR PENETRANT INSPECTION PRECEDURES D LOCKHEED MARTIN
  5PTPCG07 REQUIREMENTS FOR MAGNETIC PARTICLE INSPECTION PROCEDURES B LOCKHEED MARTIN
  5PTPCG08 REQUIREMENTS FOR ULTRASONIC INSPECTION PROCEDURES FOR METAL B LOCKHEED MARTIN
  5PTPCG09 HARDNESS AND CONDUCTIVITY TESTING, NONDESTRUCTIVE METHODS FOR VERIFYING HEAT
  TREAT CONDITION
  A-A01 LOCKHEED MARTIN
  5PTPCG10 NITAL ETCH INSPECTION OF STEEL PARTS LOCKHEED MARTIN
  5PTPCL01 MAGNETIC PARTICLE INSPECTION, REQUIREMENTS FOR B LOCKHEED MARTIN
  5PTPCL02 PENETRANT INSPECTION, GENERAL REQUIREMENTS FOR D-A01 LOCKHEED MARTIN
  5PTPCL03 ETCH INSPECTION OF MACHINED OR GROUND HIGH STRENGTH STEEL PA B LOCKHEED MARTIN
  5PTPCL05 GENERAL INSPECTION REQUIREMENTS FOR CASTINGS B LOCKHEED MARTIN
  5PTPCL06 RADIOGRAPHIC INSPECTION GENERAL REQUIREMENTS FOR LOCKHEED MARTIN
  5PTPCL07 ULTRASONIC INSPECTION GENERAL REQUIREMENTS FOR LOCKHEED MARTIN
  5PTPCL09 INSPECTION, ACCEPTANCE CRITERIA FOR HORIZONTAL STABILIZER CO E LOCKHEED MARTIN
  5PTPCL10 INSPECTION, PROCEDURE FOR COMPOSITE PIVOT SHAFT F LOCKHEED MARTIN
  5PTPCL14 INSPECTION, ULTRASONIC PROCEDURE FOR EMBEDDED CORE BONDLINES B LOCKHEED MARTIN
  5PTPCL15 INSPECTION REQUIREMENTS FOR THE VALIDATION OF FINAL FINISHES LOCKHEED MARTIN
  5PTPCL16 INSPECTION, SHEAROGRAPHY, PROCEDURES FOR COMPOSITE BONDED ASSEMBLIES A01 LOCKHEED MARTIN
  5PTPCT01 INSPECTION, ULTRASONIC PROCEDURES FOR COMPOSITE LAMINATES AND BONDED ASSEMBLIES A-A01 LOCKHEED MARTIN
  5PTPCT02 INSPECTION, EDDY CURRENT LOCKHEED MARTIN
  5PTPCT04 INSPECTION, RADIOGRAPHIC REQUIREMENTS FOR COMPOSITE LAMINATE A LOCKHEED MARTIN
  5PTPCT05 INSPECTION, ACCEPTANCE CRITERIA, FOR COMPOSITE PARTS AND ASSEMBLIES C-V02 LOCKHEED MARTIN
  5PTPCT06 INSPECTION, DEMONSTRATION REQUIREMENTS FOR NON-DESTRUCTIVE I A LOCKHEED MARTIN
  5PTPCT07 INSPECTION, ACCEPTANCE CRITERIAL FOR METAL PARTS C LOCKHEED MARTIN
  5PTPCT12 INSPECTION, EDDY CURRENT OF FRACTURE/DURABILITY CRITICAL PIN A LOCKHEED MARTIN
  5PTPCT13 INSPECTION, ULTRASONIC, OF TITANIUM ALLOY CASTING USING PHAS B LOCKHEED MARTIN
  5PTPCT16 FIRST PART QUALIFICATION, FORGINGS AND MACHINED FORGINGS C LOCKHEED MARTIN
  5PTPCT18 CORRELATION PROCEDURE FOR ULTRASONIC SYSTEMS LOCKHEED MARTIN
  5PTPCT19 AMMONIUM BIFLUORIDE ETCH INSPECTION OF TITANIUM ALLOYS V01 LOCKHEED MARTIN
  5PTPDG01 APPLICATION OF THERMAL BARRIER COATING A LOCKHEED MARTIN
  5PTPDG02 INSTALLATION PROCEDURES FOR FIREWALL MATERIALS A LOCKHEED MARTIN
  5PTPDG02 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPDG02 QPL LOCKHEED MARTIN
  5PTPDL01 STRESS RELIEVING, BAKING, AND COLD TREATMENT OF STEEL PARTS D LOCKHEED MARTIN
  5PTPDL06 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS D LOCKHEED MARTIN
  5PTPDL07 HEAT TREATMENT OF ALLOY STEELS TO 220 KSI, ULTIMATE TENSILE A LOCKHEED MARTIN
  5PTPDL09 HEAT TREATMENT OF AUSTENITIC STAINLESS STEELS A LOCKHEED MARTIN
  5PTPDL10 HEAT TREATMENT AND PROCESSING OF NICKEL AND COBALT ALLOYS A LOCKHEED MARTIN
  5PTPDL11 HEAT TREATMENT AND PROCESSING OF COPPER AND COPPER ALLOYS LOCKHEED MARTIN
  5PTPDT01 HEAT TREATMENT OF AERMET 100 STEEL A LOCKHEED MARTIN
  5PTPDT01 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPDT01 QPL LOCKHEED MARTIN
  5PTPEG82 IN-PROCESS WELDING OF CASTINGS, ENGINEERING AND INSPECTION R A LOCKHEED MARTIN
  5PTPEL09 COATING, FLAME DEPOSTION, SUPER D-GUN PROCESS A LOCKHEED MARTIN
  5PTPEL11 FUSION WELDING – METALS GROUND SUPPORT EQUIPMENT (GSE) LOCKHEED MARTIN
  5PTPFG08 PROCESS FOR APPLICATION OF POLYURETHANE FOAM IN PLACE MATERI A LOCKHEED MARTIN
  5PTPFL02 ENVIRONMENTAL AND PRESSURE SEALING , FORWARD FUSELAGE AND E J LOCKHEED MARTIN
  5PTPFL04 SEALING OF ALUMINUM PARTS TO COMPOSITE STRUCTURE FOR DISSIMI B LOCKHEED MARTIN
  5PTPFL05 INSTALLATION OF SEALANT IN SEPARABLE FAYING SURF A LOCKHEED MARTIN
  5PTPFT02 ENVIRONMENTAL AND PRESSURE SEALING OF F-22 AIRCRAFT E-A01 LOCKHEED MARTIN
  5PTPFT03 REPAIR OF FA 22 FUEL TANK LEAKS B LOCKHEED MARTIN
  5PTPFT04 APPLICATION OF JOINT SPLICE MATERIAL A LOCKHEED MARTIN
  5PTPFT06 BLOCKING OF GAPS IN F22 NON FUELED STRUCTURE LOCKHEED MARTIN
  5PTPFT07 ENVIRONMENTAL AND PRESSURE SEALING REPAIR OF F22 AIRCRAFT LOCKHEED MARTIN
  5PTPGG01 REQUIREMENTS FOR ETCH/CLEANING PRIOR TO PENETRANT INSPECTIO A LOCKHEED MARTIN
  5PTPGG06 CLEANING OF F22 PLUMBING LINES LOCKHEED MARTIN
  5PTPGL01 CLEANING OF TITANIUM AND TITANIUM ALLOYS D LOCKHEED MARTIN
  5PTPGL02 CLEANING OF CARBON AND LOW ALLOY STEELS B LOCKHEED MARTIN
  5PTPGL03 CLEANING OF ALUMINUM AND ALUMINUM ALLOYS D LOCKHEED MARTIN
  5PTPGL04 CLEANING OF CORROSION AND HEAT RESISTANT ALLOYS AND NICKEL & NICKEL ALLOYS A-A01 LOCKHEED MARTIN
  5PTPGL05 SURFACE PREPARATION OF PARTS FOR ADHESIVE BONDING D-A04 LOCKHEED MARTIN
  5PTPGL06 CLEANING OF PLUMBING LINES, AND RELATED COMPONENT H LOCKHEED MARTIN
  5PTPGL06 QUALIFIED PRODUCERS LIST FOR 5PTPGL06 CLEANING OF PLUMBING L QPL LOCKHEED MARTIN
  5PTPGL08 STRIPPING OF ORGANIC FINISHES (PAINTS), F22 AIRCRAFT LOCKHEED MARTIN
  5PTPGL09 CLEANING OF COPPER AND COPPER ALLOYS LOCKHEED MARTIN
  5PTPGL10 CLEANINESS AND PACKAGING REQUIREMENTS FOR OXYGEN SYSTEM TUBE A LOCKHEED MARTIN
  5PTPGL12 EXTERIOR CLEANING OF THE F/A 22 AIRCRAFT LOCKHEED MARTIN
  5PTPGT03 CLEANING OF THE F22 VEHICLE A LOCKHEED MARTIN
  5PTPHG16 CONVERSION COATING OF TITANIUM ALLOYS A LOCKHEED MARTIN
  5PTPHL15 CHEMICAL PROTECTIVE FILM FOR TITANIUM ALLOYS E LOCKHEED MARTIN
  5PTPHL16 PASSIVATION OF STAINLESS STEELS A LOCKHEED MARTIN
  5PTPHL18 CHEMICAL PROTECTIVE FILM TREATMENT FOR ALUMINUM AND ALUMINUM A LOCKHEED MARTIN
  5PTPHL20 CHEMICAL FILM TREATMENT, NONIMMERSION, FOR ALUMINUM AND ALUM D LOCKHEED MARTIN
  5PTPHL21 PHOSPHORIC ACID ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS A LOCKHEED MARTIN
  5PTPHL21 QUALIFIED PROCESSORS LIST FOR 5PTPHL21 PHOSPHORIC ACID ANODI QPL 1 LOCKHEED MARTIN
  5PTPHL22 CORROSION RESISTANT COPPER PLATING OF ALUMINUM B LOCKHEED MARTIN
  5PTPHL23 BORIC ACID-SULFURIC ACID ANODIZING OF ALUMINUM AND ALUMINUM B LOCKHEED MARTIN
  5PTPHL24 NICKEL AND CADMIUM PLATING, ELECTRODEPOSITED, STYLYS APPLIED A LOCKHEED MARTIN
  5PTPHL25 SODIUM AMMONIA ETCHING OF PERFLUOROALKOXY (PFA) FILM LOCKHEED MARTIN
  5PTPHL26 APPLICATION OF COATINGS BY THE HIGH VELOCITY OXYGEN FUEL MET LOCKHEED MARTIN
  5PTPJL02 SILK SCREEN PRINTING PROCESS B LOCKHEED MARTIN
  5PTPJL03 APPLICATION OF 5PTMRL17 TYPE 1 PRETREATMENT PRIMER A LOCKHEED MARTIN
  5PTPJL06 APPLICATION OF CORROSION PREVENTIVE COMPOUNDS A LOCKHEED MARTIN
  5PTPJL08 APPLICATION OF RAIN EROSION COATINGS F LOCKHEED MARTIN
  5PTPJL09 METALLIC- CERAMIC COATINGS, APPLICATION OF D LOCKHEED MARTIN
  5PTPJL11 APPLICATION AND REMOVAL OF TEMPORARY PROTECTIVE COATINGS LOCKHEED MARTIN
  5PTPJL12 APPLICATION OF PRIMER COATINGS S LOCKHEED MARTIN
  5PTPJL13 TOUCHUP AND OVERCOATING REQUIREMENTS FOR ORGANIC AND CHEMICA H LOCKHEED MARTIN
  5PTPJL15 INTEGRAL FUEL TANK COATING, PREPARATION AND APPLICATION OF C LOCKHEED MARTIN
  5PTPJL16 APPLICATION OF ORGANIC COATINGS K LOCKHEED MARTIN
  5PTPJL17 PROCESS SPEC FINISHING OF GRAPHITE REINFORCED PLASTIC PARTS F LOCKHEED MARTIN
  5PTPJL20 APPLICATION OF HIGH TEMPERATURE EXTERIOR PRIMER A LOCKHEED MARTIN
  5PTPJL26 APPLICATION OF ANTISTATIC RAIN EROSION COATING SYSTEM C LOCKHEED MARTIN
  5PTPJL27 EXTERIOR COATING SYSTEMS REQUIREMENTS, F-22 AIRCRAF LOCKHEED MARTIN
  5PTPJL35 APPLICATION OF 5PTMRL35 A LOCKHEED MARTIN
  5PTPJL37 APPLICATION OF 5PTMRL40 TEFLON FILLED COATINGS F LOCKHEED MARTIN
  5PTPJL38 APPLICATION OF CANOPY REPAIR FILM B LOCKHEED MARTIN
  5PTPJL39 REMOVAL OF COATINGS FROM PEEK SURFACES BY DRY MEDIA BLASTING LOCKHEED MARTIN
  5PTPJT01 FINISH REQUIREMENTS, F-22 AIRCRAFT AND SUPPORT EQUIPMENT G LOCKHEED MARTIN
  5PTPJT23 APPLICATION OF 5PTMRT01 ANTISTATIC COATING H LOCKHEED MARTIN
  5PTPJT24 SPRAY APPLICATION OF 5PTMRL07 TYPE D, FORM 1 A LOCKHEED MARTIN
  5PTPKG06 PROCESS AND QUALITY CONTROL OF F22, HIGH TEMPERATURE BONDED D LOCKHEED MARTIN
  5PTPKG06 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPKG07 QPL LOCKHEED MARTIN
  5PTPKG07 PROCESS AND QUALITY CONTROL OF F22 ADHESIVE BONDED ASSEMBLIE F LOCKHEED MARTIN
  5PTPKG07 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPKG07 FQPL LOCKHEED MARTIN
  5PTPKG08 PROCESS GUIDELINES FOR BONDING POLYIMIDE PRINTED WIRING BOAR A LOCKHEED MARTIN
  5PTPKG09 ADHESIVE BONDING OF ELECTRONIC COMPONENTS (NONTHERMALLY COND LOCKHEED MARTIN
  5PTPKG10 ADHESIVE BONDING OF ELECTRONIC COMPONENTS (THERMALLY CONDUCT LOCKHEED MARTIN
  5PTPKG10 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPKG10 ADHESIVE B QPL LOCKHEED MARTIN
  5PTPKG11 ADHESIVE BONDING OF ELECTRONIC COMPONENTS LOCKHEED MARTIN
  5PTPKG12 BONDING WITH GENERAL PURPOSE ADHESIVES E LOCKHEED MARTIN
  5PTPKG13 BONDING WITH SILICONE ADHESIVES B LOCKHEED MARTIN
  5PTPKG16 PROCESS AND QUALITY CONTROL OF F-22 MID-FUSELAGE CO-BONDED A F AMENDMENT 1 LOCKHEED MARTIN
  5PTPKG16 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPKG16 LOCKHEED MARTIN
  5PTPKG17 HONEYCOMB CORE DETAIL MANUFACTURE A LOCKHEED MARTIN
  5PTPKG17 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPKG17 FQPL LOCKHEED MARTIN
  5PTPKG18 PROCESS SPECIFICATION FOR SOFT BONDING EPOXY GLASS CIRCUIT C LOCKHEED MARTIN
  5PTPKG19 PROCESS SPECIFICATION FOR UNDERFILL OF BALL GRID ARRAY ASSEM A LOCKHEED MARTIN
  5PTPKL01 ADHESIVE BONDING, STRUCTURAL METAL TO METAL A LOCKHEED MARTIN
  5PTPKL09 QUALIFIED PRODUCERS LIST FOR 5PTPKL09 ASSEMBLY AND ACCEPTANC QPL 5 LOCKHEED MARTIN
  5PTPKL09 ASSEMBLY AND ACCEPTANCE OF F-22 LEADING AND TRAILING EDGE ST K LOCKHEED MARTIN
  5PTPKL16 NONSTRUCTURAL ADHESIVE, APPLICATION OF, F/A-22 AIRCRAFT H-A07 LOCKHEED MARTIN
  5PTPKL17 ADHESIVE BONDING, UNCONTROLLED ENVIRONMENT FOR COMPOSITES AN C LOCKHEED MARTIN
  5PTPKL17 QUALIFIED PRODUCERS LIST FOR 5PTPKL17 ADHESIVE BONDING, UNCO QPL LOCKHEED MARTIN
  5PTPKL18 5PTPKL18, DIAPHRAGM FORMING CONSOLIDATION AND DUAL RESIN BON LOCKHEED MARTIN
  5PTPKL19 DIAPHRAGM FORMING CONSOLIDATION AND DUAL RESIN BONDING OF TH B LOCKHEED MARTIN
  5PTPKL19 QUALIFIED PRODUCERS LIST FOR 5PTPKL19 DIAPHRAGM FORMING CONS QPL LOCKHEED MARTIN
  5PTPKL21 STRUCTURAL REPAIR OF FA 22 COMPOSITE PARTS LOCKHEED MARTIN
  5PTPKL22 ADHESIVE APPLICATION OF LIGHT ABSORBING MATERIAL A LOCKHEED MARTIN
  5PTPKT04 FABRICATION AND ACCEPTANCE OF COCURE CARBON FIBER REINFORCED A LOCKHEED MARTIN
  5PTPLG04 5PTPLG04-F, PS FOR THE MANUFACTURE AND QUALITY CONTROL OF F- F LOCKHEED MARTIN
  5PTPLG04 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPTLG04 FQPL LOCKHEED MARTIN
  5PTPLG05 PROCESS SPECIFICATION FOR THE MANUFACTURE AND QUALITY CONTRO L LOCKHEED MARTIN
  5PTPLG05 FORT WORTH QUALIFIED PROCESSORS LIST FOR 5PTPTLG05 QPL 5 LOCKHEED MARTIN
  5PTPLG06 PRCESS SPECIFICATION FOR THE MANUFACTURE AND QUALITY CONTROL N LOCKHEED MARTIN
  5PTPLG06 FORTH WORH QUALIFIED PROCESSORS LIST FOR 5PTPLG06 FQPL 7 LOCKHEED MARTIN
  5PTPLG10 DRILLING AND MACHINING OF COMPOSITE AND COMPOSITE AND COMPOS H LOCKHEED MARTIN
  5PTPLG26 PROCESSING AND QUALITY CONTROL OF GLASS REINFORCED PLASTIC P D LOCKHEED MARTIN
  5PTPLG26 FORTH WORH QUALIFIED PROCESSORS LIST FOR 5PTPLG26 FQPL 4 LOCKHEED MARTIN
  5PTPLL05 FABRICATION OF CARBON AND GLASS FABRIC REINFORCED PLASTIC AI C LOCKHEED MARTIN
  5PTPLL06 APPLICATION OF SOLID AND LIQUID SHIM MATERIAL IN MISMATCH ST C LOCKHEED MARTIN
  5PTPLL10 DRILLING AND MACHINING FOR COMPOSITE, METALLIC, AND COMPOSITE-METAL STACK PARTS B LOCKHEED MARTIN
  5PTPLL11 FABRICATION OF BISMALEIMIDE COMPOSITES F LOCKHEED MARTIN
  5PTPLL11 QUALIFIED PRODUCERS LIST FOR 5PTPLL11 FABRICATION OF BISMALE QPL 8 LOCKHEED MARTIN
  5PTPLL13 MACHINING OF NON-METALLIC CORE D LOCKHEED MARTIN
  5PTPLL13 QUALIFIED PRODUCERS LIST FOR 5PTPLL13 MACHINING OF NON-METALLIC CORE QPL 5 LOCKHEED MARTIN
  5PTPLL15 FABRICATION OF FIBER GLASS REINFORCED EPOXY LAMINATES, LOW P LOCKHEED MARTIN
  5PTPLL16 FABRICATION AND ASSEMBLY OF THE INTEGRATED FOREBODY E LOCKHEED MARTIN
  5PTPLL18 TWIN SHEET FORMING OF THERMOPLASTICS LOCKHEED MARTIN
  5PTPLL20 FABRICATION OF PLASTIC PARTS BY VACUUM FORMING LOCKHEED MARTIN
  5PTPLL27 FABRICATION OF THE SHROUD LOCKHEED MARTIN
  5PTPLL28 FABRICATION AND INSPECTION OF THE ALTERNATE INTEGRATED RADOM LOCKHEED MARTIN
  5PTPLL29 Z-PINNING OF TACKIFIED FABRIC PREFORMS FOR RTM APPLICATIONS A LOCKHEED MARTIN
  5PTPLT01 COMPOSITES, BISMALEIMIDE, FABRICATION OF B LOCKHEED MARTIN
  5PTPLT02 COMPOSITES, EPOXY, FABRICATION OF B LOCKHEED MARTIN
  5PTPLT03 FABRICATION OF COMPOSITES, THERMOPLASTIC OF A LOCKHEED MARTIN
  5PTPLT11 FASTENER HOLES IN COMPOSITE AND METAL STRUCTURE, PREPARATION FOR AND INSPECTION
  OF
  A-V04 LOCKHEED MARTIN
  5PTPMT01 LUBRICATION OF F/A-22 AIRCRAFT A LOCKHEED MARTIN
  5PTPNG02 APPLICATION PROCEDURES FOR F-22 TUBE MARKING TAPES A LOCKHEED MARTIN
  5PTPNL01 APPLICATION OF ADHESIVE-BACKED NAMEPLATES AND DECALS B-A03 LOCKHEED MARTIN
  5PTPNL02 FABRICATION OF ALUMINUM PHOTOSENSITIVE NAME PLATES A LOCKHEED MARTIN
  5PTPNL03 PROCEDURES FOR MARKING BY THE ELECTROCHEMICAL METHOD A LOCKHEED MARTIN
  5PTPNL04 PROCESSING OF NAMEPLATES AND OTHER PARTS REQUIRING MARKINGS LOCKHEED MARTIN
  5PTPNL05 APPLICATION PROCEDURES FOR F22 TUBE MARKING TAPES C LOCKHEED MARTIN
  5PTPNT01 MARKING OF PARTS AND ASSEMBLIES FOR IDENTIFICATION AND INSPECTION, F-22 AIRCRAFT H LOCKHEED MARTIN
  5PTPPL01 COMPOSITE FABRICATION FACILITY C LOCKHEED MARTIN
  5PTPPL02 HAZARDOUS MATERIALS REDUCTION A LOCKHEED MARTIN
  5PTPPL03 FUEL AND FUEL SYSTEMS CONTAMINATION AND CONTROL OF A LOCKHEED MARTIN
  5PTPPL04 CONTAMINATION CONTROL-LUBRICATING AND PRESERVING OIL C LOCKHEED MARTIN
  5PTPPL05 CONTAMINATION CONTROL – OXYGEN SYSTEMS A LOCKHEED MARTIN
  5PTPPL07 CONTAMINATION CONTROL OF FA 22 COOLING FLUID SYSTEMS B LOCKHEED MARTIN
  5PTPRT02 OVERBRAIDING ON WIRE BUNDLES B LOCKHEED MARTIN
  5PTPRT08 ELECTRICAL WIRE AND WIRE HARNESS IDENTIFICATION F LOCKHEED MARTIN
  5PTPRT09 ASSEMBLY AND INSTALLATION OF FIBER OPTICS CABLE HARNESS FOR C LOCKHEED MARTIN
  5PTPRT18 FIBER OPTIC TERMINATION AND ASSEMBLY D LOCKHEED MARTIN
  5PTPRT19 SOLDERING-ELECTRICAL CONNECTIONS A LOCKHEED MARTIN
  5PTPRT20 IN PROCESS FIBER OPTIC TESTING B LOCKHEED MARTIN
  5PTPTG16 FRACTURE/DURABILITY CONTROL SPECIFICATION FOR TITANIUM BULKH A LOCKHEED MARTIN
  5PTPTG16 FORT WORTH QUALIFIED PRODUCTS LIST 5PTPTG16 FQPL LOCKHEED MARTIN
  5PTPTL11 APPLICATION OF CONDUCTIVE PAINT R LOCKHEED MARTIN
  5PTPTL11 QUALIFIED PRODUCERS LIST FOR 5PTPLL11 FABRICATION OF BISMALE QPL 7 LOCKHEED MARTIN
  5PTPTL13 CASTINGS AND FORGINGS, DIMENSIONAL CONTROL OF A LOCKHEED MARTIN
  5PTPTL14 STORAGE, HANDLING, ISSUANCE AND AGE CONTROL OF RUBBER AND RU A LOCKHEED MARTIN
  5PTPTL15 LASER ETCHING A LOCKHEED MARTIN
  5PTPTL16 METALIZATION OF QUARTZ CYANATE ESTER LAMINATE A LOCKHEED MARTIN
  5PTPTL17 INSTALLATION OF GAP FILLER U LOCKHEED MARTIN
  5PTPTL21 INSTALLATION OF REMOVABLE AND PERMANENT EXTERNAL WIRING ON T A LOCKHEED MARTIN
  5PTPTL22 APPLICATION OF 5PTMRL07 EXTERIOR COATING B LOCKHEED MARTIN
  5PTPTL22 QUALIFIED PRODUCERS LIST FOR APPLICATION OF 5PTMRL07 EXTERIO QPL 1 LOCKHEED MARTIN
  5PTPTL26 THERMO-FORMING OF 5PTMKL16 MATERIAL LOCKHEED MARTIN
  5PTPTL27 PACKAGING CONFIGURATION OF 5PTMKL16 BOOT KITS T LOCKHEED MARTIN
  5PTPTL28 TOUCH UP OF LOW OBSERVABLES COATINGS LOCKHEED MARTIN
  5PTPTL29 PROCESSING OF F-22 INLET DUCT ASSEMBLY MISMATCH STEPS C LOCKHEED MARTIN
  5PTPTL30 REPAIR OF OML COATING FOR F-22 A LOCKHEED MARTIN
  5PTPTT01 COMPOSITES STANDARD TEST METHODS FOR TESTING OF ADVANCED COM B LOCKHEED MARTIN
  5PTPTT02 FRACTURE/DURABILITY CRITICAL PARTS, GENERAL SPECIFICATION FOR CONTROL OF E-V06 LOCKHEED MARTIN
  5PTPTT08 ADHESIVES AND HONEYCOMB SANDWICH, STANDARD TEST METHODS FOR A-A01 LOCKHEED MARTIN
  5PTPTT09 Composites Materials, Batch Acceptance Test Methods for B-A03 LOCKHEED MARTIN
  5PTPTT11 SELECTED SAFETY, MISSION, AND DURABILITY CRITICAL MECHANICAL C LOCKHEED MARTIN
  5PTPTT12 WIND SWEPT SURFACE PARTS, GENERAL SPECIFICATION FOR CONTROL OF B V04 LOCKHEED MARTIN
  5PTPUL01 PROTECTION OF PARTS AND MATERIALS IN STORAGE AND IN PROCESS A LOCKHEED MARTIN
  5PTPUL02 APPLICATION OF SCALE INHIBITING COMPOUND LOCKHEED MARTIN
  5PTPWG01 PROCESS SPECIFICATION FOR SILICONE RUBBER ENCAPSULATION COMP A LOCKHEED MARTIN
  5PTPWG02 PROCESSING OF SYNTACTIC FOAM POWDER FOR THE F-22 AIM-9 POWER A LOCKHEED MARTIN
  5PTPWG03 APPLICATION OF THERMALLY CONDUCTIVE ADHESIVES FOR F-22 AIM- LOCKHEED MARTIN
  5PTPWG04 GENERAL PURPOSE BONDING APPLICATIONS FOR F-22 AIM-9 POWER SU LOCKHEED MARTIN
  5PTPWG05 APPLICATION OF A LAMINATING, POTTING, OR CONFORMAL COATING M LOCKHEED MARTIN
  5PTPWG06 APPLICATION OF VARNISH COATING TO F-22 AIM-9 POWER SUPPLY CO LOCKHEED MARTIN
  5PTPYL02 APPROVED LM AERO-FW PROCESS SPECIFICATION FOR SUBSTITUTION O LOCKHEED MARTIN
  5PTR5103 SIDE WEAPON BAY DOOR DRIVE SYSTEM INSTALLATION AND ALIGNMENT LOCKHEED MARTIN
  5PTR5106 F-22 GUN ASSY AND SUPPORT INSTALLATION AND REMOVAL PROCEDURE A LOCKHEED MARTIN
  5PTR5200 FA22 INSTALLED ROTARY LATCH RIGGING INSTRUCTIONS A LOCKHEED MARTIN
  AP8117 UNION – TUBE WELD AD LOCKHEED MARTIN
  APPENDIX QX SUPPLIER QUALITY REQUIREMENTS 7 LOCKHEED MARTIN
  CMA-0003 CONFIGURATION MANAGEMENT REQUIREMENTS FOR SUPPLIERS AND CONT G LOCKHEED MARTIN
  E1-0234M F-35 SUPPLIER PACKAGING REQUIREMENTS MANUAL E LOCKHEED MARTIN
  ENS1312 EDDIE-BOLT 2 SYSTEM EDDIE-NUT PROCUREMENT SPECIFICATION G LOCKHEED MARTIN
  F/A-22 SPECIFIC COMPOSITE_MATERIAL_SPECIFICATION_CALLOUTS_FOR_F22_PRODUCTION Q LOCKHEED MARTIN
  LMA-D0002 TEST PLAN TO QUALIFY COMPOSITE MATERIALS LOCKHEED MARTIN
  LMA-D0004 METALLIC TEST COUPONS AND PROCEDURES LOCKHEED MARTIN
  LMA-D0006 ENG MATERIALS AND APPROVED PRODUCTS D LOCKHEED MARTIN
  LMA-D0010 COMPOSITE PARTS SUPPLIER CAPABILITY DEMONSTRATION, QUALIFICA C LOCKHEED MARTIN
  LMA-D0011 QUALIFICATION OF PECHINEY RAVENSWOOD FOR PRODUCING LMA-M7050 LOCKHEED MARTIN
  LMA-D0012 QUALIFICATION OF ALCOA DAVENPORT FOR PRODUCING LMA-M7050 (70 LOCKHEED MARTIN
  LMA-D0013 QUALIFICATION OF KAISER ALUMINUM FOR PRODUCING LMA-M7050 (70 LOCKHEED MARTIN
  LMA-D0014 TEST REQUIREMENTS FOR NEW OR ALTERNATE SOURCES AND PROCESSES A LOCKHEED MARTIN
  LMA-D0016 QUALIFICATION OF HOWMET WHITEHALL PRODUCED INGOT AND ALCOA C LOCKHEED MARTIN
  LMA-D0017 STANDARD AND OVERSIZE EXPANDED INSTALL BUSHING PART NUMBERS C LOCKHEED MARTIN
  LMA-D0018 QUALIFICATION REPORT FOR BRYTE (MORGAN HILL, CA) CYANATE EST LOCKHEED MARTIN
  LMA-D0019 QUALIFICATION OF CYTEC (ANAHEIM, CA) OF CYANATE ESTER PREPRE LOCKHEED MARTIN
  LMA-D0020 QUALIFICATION REPORT OF UNIQUE ID SERVICE PROVIDER B LOCKHEED MARTIN
  LMA-D0021 SWAGING PART AND TOOLING NUMBERS LOCKHEED MARTIN
  LMA-D0023 UNIQUE ITEM IDENTIFICATION CONSTRUCTION GUIDELINES A LOCKHEED MARTIN
  LMA-D0024 QUALIFICATION OF MO-SCI SPECIALTY PRODUCTS GL-0191 GLASS MIC LOCKHEED MARTIN
  LMA-D0025 QUALIFICATION OF EMERSON AND CUMING SID 800 GLASS MICROBEADS LOCKHEED MARTIN
  LMA-D0026 QUALIFICATION TESTING REPORT AND PROCEDURES FOR LOCKHEED MARTIN
  LMA-D0027 QUALIFICATION OF CYTEC (ANAHEIM, CA) CYANATE ESTER PREPREG C LOCKHEED MARTIN
  LMA-D0029 ADOPTION OF LM AERO SPECIFICATIONS C LOCKHEED MARTIN
  LMA-D0030 QUALIFICATION OF SHULTZ STEEL COMPANY PRODUCED DIE FORGINGS, LOCKHEED MARTIN
  LMA-D0031 APPN SOLID SHIM STOCK REQUIREMENTS A LOCKHEED MARTIN
  LMA-D0032 APPN LAMINATED SHIM STOCK REQUIREMENTS LOCKHEED MARTIN
  LMA-D0037 QUALIFICATION OF SOLID CONCEPTS TO LMA-PL019 LOCKHEED MARTIN
  LMA-M1004 DATA BUS CABLE LOCKHEED MARTIN
  LMA-M1017 HIGH TEMP BRAIDING THREAD LOCKHEED MARTIN
  LMA-M3001 TITANIUM ALLOY CASTINGS TI 6AI-4V VACUUM MELTED, INVESTMENT, A LOCKHEED MARTIN
  LMA-M4010 ALUMINUM ALLOY EXTRUDED SHAPES B LOCKHEED MARTIN
  LMA-M5001 ALUMINUM ALLOY DIE FORGINGS 7050-01, HIGH TEMPERATURE ANNEAL LOCKHEED MARTIN
  LMA-M5004 TITANIUM ALLOY FORGINGS, DAMAGE TOLERANT GRADE TI-6AL-4V EXT E LOCKHEED MARTIN
  LMA-M5006 TITANIUM ALLOY FORGINGS, DAMAGE TOLERANT, TI-6AL-2SN-2ZR-2MO LOCKHEED MARTIN
  LMA-M6002 COPPER NICKEL TIN ALLOY, BARS AND RODS, 77 CU-15NI-8SN SOLUT LOCKHEED MARTIN
  LMA-M6003 TITANIUM ALLOY HAND FORGINGS GREATER THAN 5.00 INCH THICK, T A LOCKHEED MARTIN
  LMA-M7001 TITANIUM ALLOY SHEET, TI-6AL-4V, FOR MULTI-SHEET SUPERPLASTI LOCKHEED MARTIN
  LMA-M7002 CLOSE THICKNESS TOLERANCES FOR ALUMINUM ALLOYS LOCKHEED MARTIN
  LMA-M7003 TITANIUM ALLOY PLATE, DAMAGE TOLERANT GRADE, TI-6AL-2SN-2ZR- A LOCKHEED MARTIN
  LMA-M7006 TITANIUM ALLOY PLATE DAMAGE TOLERANT GRADE, TI-6AL-4V (ELI), C LOCKHEED MARTIN
  LMA-M7008 ALUMINUM ALLOY PLATE, 2124-T8151, FRACTURE TOUGHNESS TESTED D LOCKHEED MARTIN
  LMA-M7009 ALUMINUM ALLOY PLATE, 2124-T851 FRACTURE TOUGHNESS TESTED C LOCKHEED MARTIN
  LMA-M7013 ALUMINUM ALLOY 7475 SHEET AND PLATE (ANNEALED CONDITION) B LOCKHEED MARTIN
  LMA-M7040 ALUMINUM ALLOY PLATE, 7140-T7451, FRACTURE TOUGHNESS TESTED C LOCKHEED MARTIN
  LMA-M7060 MECHANICALLY STRENGTHENED CORROSION RESISTANT STEEL FOR BEAR A LOCKHEED MARTIN
  LMA-M7097 2297-T87, ALUMINUM ALLOY PLATE A LOCKHEED MARTIN
  LMA-M8002 TUBING, TITANIUM, WELDED LOCKHEED MARTIN
  LMA-M8003 TITANIUM ALLOY TUBING, SEAMLESS,HYDRAULIC QUALITY TI-6AL-4V, A LOCKHEED MARTIN
  LMA-M9001 TI-6AL-4V (ELI) ALLOY SHAPES PRODUCED BY A DIRECT MATERIAL D LOCKHEED MARTIN
  LMA-M9002 TI-6AL-4V (ELI) ALLOY WIRE FOR DIRECT MANUFACTURING DEPOSIT LOCKHEED MARTIN
  LMA-M9003 TITANIUM POWDER, FOR PRE-ALLOYED 6AI-4V A LOCKHEED MARTIN
  LMA-M9004 COMMERCIALLY PURE TITANIUM POWDER LOCKHEED MARTIN
  LMA-M9005 TITANIUM SHEET AND STRIP, FOR ALLOY 6AL-4V ROLL COMPACTED, S LOCKHEED MARTIN
  LMA-M9006 COMMERCIALLY PURE TITANIUM SHEET AND STRIP, ROLL COMPACTED, LOCKHEED MARTIN
  LMA-MA012 TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR STRUCTURAL LOCKHEED MARTIN
  LMA-MA013 TAPE, CARBON FIBER EPOXY PREPREG, OVEN CURING, FOR PRIMAY AI LOCKHEED MARTIN
  LMA-MB003 THREE-DIMENSIONAL WOVEN PREFORMS, FOR PRIMARY AIRCRAFT STRUC B LOCKHEED MARTIN
  LMA-MB005 PREPREG, E-GLASS FABRIC, WOVEN BISMALEIMIDE RESIN IMPREGNATE A LOCKHEED MARTIN
  LMA-MB005A/F35- PREPREG, E-GLASS FABRIC, WOVEN BISMALEIMIDE RESIN IMPREGNATE VARIATION F-35-01 LOCKHEED MARTIN
  LMA-MB006 PREPREG, E-GLASS FABRIC WOVEN BISMALEIMIDE RESIN IMPREGNATED B LOCKHEED MARTIN
  LMA-MB007 PREPREG, E-GLASS FABRIC, WOVEN EPOXY RESIN IMPREGNATED, FOR A LOCKHEED MARTIN
  LMA-MB009 PREPREG, FABRIC, WOVEN EPOXY RESIN IMPREGNATED B LOCKHEED MARTIN
  LMA-MB009 REPREG, E GLASS FABRIC, POLYIMIDE RESIN IMPREGNATED LOCKHEED MARTIN
  LMA-MB010 PREPREG, GRAPHITE FABRIC AND COPPER MESH, BISMALEIMIDE RESIN LOCKHEED MARTIN
  LMA-MB011 REPREG, GRAPHITE FABRIC AND COPPER MESH, EPOXY RESIN IMPREGN A LOCKHEED MARTIN
  LMA-MB012 FABRIC, CARBON FIBER, WOVEN, BISMALEMIDE RESIN TACKIFIED FOR LOCKHEED MARTIN
  LMA-MB013 FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN TACKIFIED FOR RESIN LOCKHEED MARTIN
  LMA-MB014 FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN IMPREGNATED, FOR ST LOCKHEED MARTIN
  LMA-MB016 QUARTZ FABRIC, CYANATE ESTER IMPREGNATED, 350F CURE, FOR 300 D LOCKHEED MARTIN
  LMA-MB017 ADHESIVE COATED CU MESH FOR LIGHTNING STRIKE PROTECTION FOR C LOCKHEED MARTIN
  LMA-MB018 ADHESIVE COATED CU MESH FOR LIGHTNING STRIKE PROTECTION FOR LOCKHEED MARTIN
  LMA-MB019 PREPREG-E-GLASS FABRIC AND LOW TEMPERATURE CURE EPOXY RESIN D LOCKHEED MARTIN
  LMA-MB021 FABRIC, CARBON FIBER/EPOXY PREPREG, OVEN CURING, FOR PRIMARY LOCKHEED MARTIN
  LMA-MB023 WOVEN GLASS/EPOXY FABRIC, 350F CURE FOR 160F APPLICATIONS LOCKHEED MARTIN
  LMA-MB024 PHENOLIC RESIN PREIMPREGNATED MATERIALS FOR HIGH TEMPERATURE A LOCKHEED MARTIN
  LMA-MB029B/F35- EPOXY RESIN PREIMPREGNATED MATERIAL FOR HIGH TEMPERATURE APP VARIATION JSF LOCKHEED MARTIN
  LMA-MB030 EPOXY PREPREG, GLASS REINFORCED, 350F CURE FOR 300F SERVICE B LOCKHEED MARTIN
  LMA-MB031 FABRIC, CARBON FIBER EPOXY PREPREG, OVEN CURING, FOR PRIMARY A LOCKHEED MARTIN
  LMA-MB400 QUARTZ FABRIC, EPOXY MATRIX PREPREG MATERIAL, BIAS WEAVE, LO LOCKHEED MARTIN
  LMA-MB401 EPOXY IMPREGNATED ASTROQUARTZ III FABRIC, LOW TEMPERATURE CU LOCKHEED MARTIN
  LMA-MC001 FIBERS AND FABRICS, CARBON, FOR STRUCTURAL COMPOSITES A LOCKHEED MARTIN
  LMA-MC002 FIBER, SILICON CARBIDE, FOR STRUCTURAL COMPOSITES LOCKHEED MARTIN
  LMA-MC003 FABRIC, S-2 GLASS FOR STRUCTURAL COMPOSITES A LOCKHEED MARTIN
  LMA-MC005 BRAIDED CARBON FIBER ROPE LOCKHEED MARTIN
  LMA-MC007 FIBERS AND FABRICS, CARBON, STANDARD AND INTERMEDIATE MODULU LOCKHEED MARTIN
  LMA-MC009 RESIN TRANSFER MOLDED PARTS LOCKHEED MARTIN
  LMA-MC400 Z-PINNING LOCKHEED MARTIN
  LMA-MD002 HEAT EXPANDING ADHESIVE, BISMALEIMIDE, FOR SPLICING HONEYCOM A LOCKHEED MARTIN
  LMA-MD003 ADHESIVE-HONEYCOMB CORE SPLICING (250F AND 350F CURING) B LOCKHEED MARTIN
  LMA-MD004 TITANIUM HONEYCOMB CORE MATERIAL LOCKHEED MARTIN
  LMA-MD007 ADHESIVE, MODIFIED EPOXY FILM 350F CURE A LOCKHEED MARTIN
  LMA-MD013 CORE, HONEYCOMB, FIBROUS ARAMID BASE, PHENOLIC COATED LOCKHEED MARTIN
  LMA-MD017 CORE, HONEYCOMB, FIBROUS HIGH-MODULUS PARA-ARAMID BASE, PHEN C LOCKHEED MARTIN
  LMA-MD019 HEAT EXPANDING ADHESIVE SPLICE MATERIAL FOR HONEYCOMB CORE D LOCKHEED MARTIN
  LMA-MD022 GLASS REINFORCED PHENOLIC HONEYCOMB CORE LOCKHEED MARTIN
  LMA-MD028 STRUCTURAL ADHESIVE, 250F CURE TEMPERATURE, CONTROLLED FOW M LOCKHEED MARTIN
  LMA-MD083 MODIFIED EPOXY PHENOLIC ADHESIVE FILM. LOCKHEED MARTIN
  LMA-MD101 FLEXIBLE 5052 ALLOY ALUMINUM HONEYCOMB CORE LOCKHEED MARTIN
  LMA-MD102 ALUMINUM HONEYCOMB CORE MATERIAL-5052 ALLOY, CORROSION RESIS A LOCKHEED MARTIN
  LMA-MD107 BISMALEIMIDE FILM ADHESIVE LOCKHEED MARTIN
  LMA-MD401 CORE, HONEYCOMB, FIBERGLASS BASE, POLYIMIDE COATE LOCKHEED MARTIN
  LMA-MD402 HIGH SERVICE TEMPERATURE POLYIMIDE FILM ADHESIVE LOCKHEED MARTIN
  LMA-MD403 POLYIMIDE FOAMING ADHESIVE LOCKHEED MARTIN
  LMA-ME001 CLOSED CELL NEOPRENE FOAM LOCKHEED MARTIN
  LMA-ME002 EXPANDED POLYTETRAFLUOROETHYLENE (EPTFE) GASKET MATERIAL F LOCKHEED MARTIN
  LMA-ME004 POLYETHER URETHANE, MOLDED A LOCKHEED MARTIN
  LMA-ME019 CLOSED CELL VINYL FOAM LOCKHEED MARTIN
  LMA-ME021 SYNTHETIC RUBBER SHEET A LOCKHEED MARTIN
  LMA-ME024A LOW AND HIGH TEMPERATURE AND TEAR RESISTANT SILICONE RUBBER A LOCKHEED MARTIN
  LMA-ME027 RUBBER, FLUOROSILICONE, SHEET MOLDED, AND EXTRUDED D LOCKHEED MARTIN
  LMA-ME071 CLOSED CELL SILICONE SPONGE SHEET LOCKHEED MARTIN
  LMA-ME098 SYNTHETIC ELASTOMER, SPECIAL PURPOSE LOCKHEED MARTIN
  LMA-MF001 DECALCOMANIA, POLYESTER, FUEL RESISTANT LOCKHEED MARTIN
  LMA-MF002 DECALCOMANIA, HIGH HEAT RESISTANCE, OPERATIONS UP LOCKHEED MARTIN
  LMA-MF005 DECALCOMANIA FOR ITEM UNIQUE IDENTIFICATION B LOCKHEED MARTIN
  LMA-MF006 DECAL MATERIAL FOR AIRCRAFT APPLICATIONS LOCKHEED MARTIN
  LMA-MF013 INSULATION TEDLAR TAPE LOCKHEED MARTIN
  LMA-MF014 DOUBLE BACKED ADHESIVE TAPE C LOCKHEED MARTIN
  LMA-MF015 NON-STRUCTURAL, UNSUPPORTED ADHESIVE FILM C LOCKHEED MARTIN
  LMA-MF025 MATERIALS, RAIN EROSION RESISTANT TAPE, MOLDED MATERIALS, AN LOCKHEED MARTIN
  LMA-MF031 HEAT SHRINKABLE ELECTRICAL IDENTIFICATION TAPE LOCKHEED MARTIN
  LMA-MF047 ALUMINUM FOIL TAPE, ACRYLIC OR SILICONE ADHESIVE C LOCKHEED MARTIN
  LMA-MF053 OIL AND HYDRAULIC FLUID RESISTANT ADHESIVE BACKED LOCKHEED MARTIN
  LMA-MF067 SILICONE AND ACRYLIC ADHESIVE PTFE TAPE LOCKHEED MARTIN
  LMA-MF069 WHITE ELECTRICAL HARNESS MARKING TAPE A LOCKHEED MARTIN
  LMA-MF074 ELECTRICAL BAR CODE IDENTIFICATION TAPE B LOCKHEED MARTIN
  LMA-MF084 UNSUPPORTED SELF ADHESIVE SILICONE TAPE A LOCKHEED MARTIN
  LMA-MF089 ELECTRICAL LACING TAPE A LOCKHEED MARTIN
  LMA-MF092 PRESSURE SENSITIVE ADHESIVE BACKED POLYESTER IDENTIFICATION B LOCKHEED MARTIN
  LMA-MF093 PRESSURE SENSITIVE ADHESIVE BACKED POLYESTER OVERLAMINATE FI C LOCKHEED MARTIN
  LMA-MF094 COLOR CODED PRESSURE SENSITIVE ADHESIVE IDENTIFICATION TAPE C LOCKHEED MARTIN
  LMA-MF099 IDENTIFICATION TAPE WITH TRANSPARENT PROTECTIVE OVERLAY LOCKHEED MARTIN
  LMA-MG000 NYLON CLOTH LOCKHEED MARTIN
  LMA-MG001 CLOTH, CLEANING, COTTON AND SYNTHETIC LOCKHEED MARTIN
  LMA-MG004 WOVEN TEXTILE NYLON WEBBING LOCKHEED MARTIN
  LMA-MG005 CLOTH, SYNTHETIC FIBER, PEEL PLY RELEASE LOCKHEED MARTIN
  LMA-MG009 HIGH TEMP SILICONE COATED NYLON FABRIC LOCKHEED MARTIN
  LMA-MG011 NYLON HOOD AND PILE FASTENER TAPE LOCKHEED MARTIN
  LMA-MG055 TAPE AND CLOTH GLASS FABRIC A LOCKHEED MARTIN
  LMA-MG067 POLYESTER FABRIC A LOCKHEED MARTIN
  LMA-MG098 QUARTZ CLOTH TAPE LOCKHEED MARTIN
  LMA-MJ001 FLEXIBLE POLYURETHANE FOAM LOCKHEED MARTIN
  LMA-MK000 TEFLON SHEET AND ROD LOCKHEED MARTIN
  LMA-MK001 BISMALEIMIDE POTTING COMPOUND A LOCKHEED MARTIN
  LMA-MK002 EPOXY POTTING COMPOUND LOCKHEED MARTIN
  LMA-MK003 MOLDABLE PLASTIC SHIM A LOCKHEED MARTIN
  LMA-MK005 POLYETHERIMIDE MOLDERING RESIN LOCKHEED MARTIN
  LMA-MK006 POLYCARBONATE SHEET, ROD AND PELLETS A LOCKHEED MARTIN
  LMA-MK010 THERMOPLASTIC SHEET, POLYCARBONATE LOCKHEED MARTIN
  LMA-MK019 THERMOPLASTIC POWDER A LOCKHEED MARTIN
  LMA-MK036 LAMINATED ABS SHEET LOCKHEED MARTIN
  LMA-MK053 MOLYBDENUM DISULFIDE FILLED NYLON SHEET AND ROD A LOCKHEED MARTIN
  LMA-MK058 LAMINATED PHENOLIC SHEET, COTTON FABRIC BASE LOCKHEED MARTIN
  LMA-MK064 POLYPHENYLENE SULFIDE SHEET, ROD, AND PELLET LOCKHEED MARTIN
  LMA-MK085 NYLON SHEET AND ROD A LOCKHEED MARTIN
  LMA-ML002 INTERMEDIATE TEMPERATURE CURING TWO-PART EPOXY MATERIALS FOR LOCKHEED MARTIN
  LMA-ML004 ROOM TEMPERATURE CURING TWO PART EPOXY LAMINATING RESIN B LOCKHEED MARTIN
  LMA-ML005 EPOXY RESIN AND TACKIFIER FOR RESIN TRANSFER MOLDED PARTS LOCKHEED MARTIN
  LMA-ML006 BISMALEIMIDE RESIN AND TACKIFIER FOR RESIN TRANSFER MOLDED AND CLOSED VOLUME
  MOLDING PROCESSES
  A LOCKHEED MARTIN
  LMA-ML008 TACKIFIER, SOLVATED, EPOXY AND BISMALEIMIDE RESIN COMPATIBLE LOCKHEED MARTIN
  LMA-ML013 TWO-PART, ROOM TEMPERATURE CURING, EPOXY ADHESIVE WITH HIGH A LOCKHEED MARTIN
  LMA-ML015 GENERAL PURPOSE NON-STRUCTURAL SOLVENT THINNED ADHESIVES LOCKHEED MARTIN
  LMA-ML017 ADHESIVE- SEALING COMPOUND, ONE PART, ROOM TEMPERATURE VULCA B LOCKHEED MARTIN
  LMA-ML018 ADHESIVE, TWO-PART, ROOM TEMPERATURE CURING, EPOXY FOR BOND A LOCKHEED MARTIN
  LMA-ML019 EPOXY RESIN FOR VARTM APPLICATIONS B LOCKHEED MARTIN
  LMA-ML025 EPOXY RESINS FOR HIGH TEMPERATURE APPLICATIONS B LOCKHEED MARTIN
  LMA-ML032 SILICONE HEAT SINK COMPOUND LOCKHEED MARTIN
  LMA-ML045 OVEN CURING EPOXY RESIN FILM, FOR PRIMARY AIRCRAFT STRUCTURE LOCKHEED MARTIN
  LMA-ML049 HIGH TEMPERATURE PHENOLIC RESIN LOCKHEED MARTIN
  LMA-ML053 COMPOUND, COMPRESSION MOLDING, GLASS FILLED EPOXY RESIN LOCKHEED MARTIN
  LMA-ML060 SILICONE COMPOUNDS, TWO-PART, ROOM TEMP VULCANIZING LOCKHEED MARTIN
  LMA-ML068 HIGH PEEL STRENGTH, ROOM OR ELEVATED TEMPERATURE CURING EPOX A LOCKHEED MARTIN
  LMA-ML069 TWO-PART EPOXY ADHESIVE FOR USE IN INTEGRAL FUEL TANK STRUCT A LOCKHEED MARTIN
  LMA-ML070 HIGH TEMPERATIRE EPOXY PHENOLIC ADHESIVE B LOCKHEED MARTIN
  LMA-ML074 TWO PART ACRYLIC ADHESIVE D LOCKHEED MARTIN
  LMA-ML075 FAST CURING ACRYLIC ADHESIVE C LOCKHEED MARTIN
  LMA-ML076 ONE PART ROOM TEMPERATURE VULCANIZING SILICONE ADHESIVE C LOCKHEED MARTIN
  LMA-ML077 TWO PART POLYURETHANE ADHESIVE A LOCKHEED MARTIN
  LMA-ML078 FAST SETTING ROOM TEMPERATURE CURING EPOXY ADHESIVE A LOCKHEED MARTIN
  LMA-ML082 RETAINING COMPOUNDS AND PRIMERS B LOCKHEED MARTIN
  LMA-ML111 ADHESIVE, EPOXY PASTE, TWO PART C LOCKHEED MARTIN
  LMA-ML121 ADHESIVE, EPOXY, FLEXIBLE, HIGH PEEL, ROOM TEMPERATURE B LOCKHEED MARTIN
  LMA-ML400 ADHESIVE, CYANATE ESTER, 350 F CURE, FOR 300 F SERVICE E LOCKHEED MARTIN
  LMA-MM001 WATER BASED ADHESION PROMOTER FOR POLYETHYLENE FOAMS LOCKHEED MARTIN
  LMA-MM176 COMPOUND, MOLD SEALER AND RELEASE AGENT A LOCKHEED MARTIN
  LMA-MM213 PROMOTER, ADHESION, RUBBER BONDING LOCKHEED MARTIN
  LMA-MN015 CLEANER, PRE-PAINT CLEANING, LOW VAPOR PRESSURE A LOCKHEED MARTIN
  LMA-MN021 AQUEOUS CLEANER, FOR PRECISION CLEANING OF METAL PARTS LOCKHEED MARTIN
  LMA-MN022 AQUEOUS ALKALINE DEGREASER LOCKHEED MARTIN
  LMA-MN040 LMA-MN040B, GENERAL PURPOSE SOLVENT B LOCKHEED MARTIN
  LMA-MN301 CLEANER, ALKALINE, FOR ALUMINUM AND MAGNESIUM ALLOYS LOCKHEED MARTIN
  LMA-MN302 CLEANER, EMULSION LOCKHEED MARTIN
  LMA-MN303 ETCHANT, ALKALINE, FOR ALUMINUM ALLOYS LOCKHEED MARTIN
  LMA-MN304 CLEANER, ALKALINE, NON-ELECTROLYTIC LOCKHEED MARTIN
  LMA-MN305 CLEANER, ETCH, ALKALINE, FOR ALUMINUM AND ALUMINUM ALLOYS LOCKHEED MARTIN
  LMA-MN307 HAND CLEANING SOLVENTS, LOW VAPOR PRESSURE AND AQUEOUS COMPO LOCKHEED MARTIN
  LMA-MN402 DEOXIDIZER, ACID TYPE LOCKHEED MARTIN
  LMA-MP002 LUBRICANT, LOW-TEMPERATURE LOCKHEED MARTIN
  LMA-MP004 LUBRICANT, FITTING, FOR COLLANT, ENGINE OIL AND FUEL LINES LOCKHEED MARTIN
  LMA-MR002 COATING SYSTEM, RAIN EROSION AND FUNGUS RESISTANT, FOR AIRCR LOCKHEED MARTIN
  LMA-MR003 WATERBORNE EPOXY PRIMER E LOCKHEED MARTIN
  LMA-MR003 WATERBORNE EPOXY PRIMER E LOCKHEED MARTIN
  LMA-MR004 PLASTISOL, FOR DIP COATING METALLIC PARTS LOCKHEED MARTIN
  LMA-MR005 THIN FILM CERAMIC EPOXY COATING A LOCKHEED MARTIN
  LMA-MR006 MOISTURE BARRIER COATING A LOCKHEED MARTIN
  LMA-MR007 DIRECT PRINT MARKING INK FOR UNIQUE IDENTIFICATION A LOCKHEED MARTIN
  LMA-MR008 ABRASION RESISTANT POLYURETHANE COATINGS, TEFLON FILLED A LOCKHEED MARTIN
  LMA-MR017 ANTISTATIC RAIN EROSION COATING SYSTEM LOCKHEED MARTIN
  LMA-MR018 PTFE-BEARING ANTI-WEAR LINER COATING LOCKHEED MARTIN
  LMA-MR023 HIGH TEMPERATURE PRIMER FOR EXTERIOR TOPCOAT LOCKHEED MARTIN
  LMA-MR024 HIGH TEMPERATURE EXTERIOR TOPCOAT V03-01 LOCKHEED MARTIN
  LMA-MR027 TEFLON PIGMENTED COATINGS B LOCKHEED MARTIN
  LMA-MR028 COATING, POLYURETHANE POLYCARBONATE-COMPATIBLE LOCKHEED MARTIN
  LMA-MR029 STENCIL ENAMEL LOCKHEED MARTIN
  LMA-MR035 PRIMER COATING, FLEXIBLE B LOCKHEED MARTIN
  LMA-MR058 PRIMER FOR SEALANTS C LOCKHEED MARTIN
  LMA-MR059 PRIMERS FOR SILICONE SEALANTS B LOCKHEED MARTIN
  LMA-MR400 SURFACE PRIMER FOR POLYETHYLENE FOAM LOCKHEED MARTIN
  LMA-MU001 SEALING CAPS FOR INTEGRAL FUEL TANK FASTENER SYSTEM A LOCKHEED MARTIN
  LMA-MU002 POLYTHIOETHER FILLER A LOCKHEED MARTIN
  LMA-MU003 SEALING COMPOUND, FUEL RESISTANT, ELECTRICALLY CONDUCTIVE LOCKHEED MARTIN
  LMA-MU004 FOAM, POLYURETHANE, FOAM IN PLACE, VOID FILLER LOCKHEED MARTIN
  LMA-MU006 SEALANT, POLYSULFIDE, CORROSION-RESISTANT C LOCKHEED MARTIN
  LMA-MU008 SEALING MATERIALS, LOW BOND STRENGTH GASKETS AND SEALANTS B LOCKHEED MARTIN
  LMA-MU031 HIGH TEMPERATURE GENERAL PURPOSE SEALING COMPOUND LOCKHEED MARTIN
  LMA-MU044 SEALANT, INTEGRAL FUEL TANK AND GENERAL USAGE LOCKHEED MARTIN
  LMA-MU065 CANOPY SEALING COMPOUND A LOCKHEED MARTIN
  LMA-MV003 SOLID GLASS MICROBEADS, NON TREATED LOCKHEED MARTIN
  LMA-MV004 CONDUCTIVE FOAM, SEMI-RIGID LOCKHEED MARTIN
  LMA-MW001 THERMAL BARRIER COATING A LOCKHEED MARTIN
  LMA-MW002 FIBER INSULATION D LOCKHEED MARTIN
  LMA-MW004 AMORPHOUS SILICA FIBER MATERIAL FOR THREAD, ROPE, NEEDLE FE LOCKHEED MARTIN
  LMA-MW025 FLEXIBLE THERMAL BLANKET INSULATION LOCKHEED MARTIN
  LMA-MW045 PREFORMED CERAMIC THERMAL INSULATION LOCKHEED MARTIN
  LMA-MY081 HEAT SHRINKABLE TUBING WITH ADHESIVE LOCKHEED MARTIN
  LMA-PA003 PROCESSING OF METAL TUBING F LOCKHEED MARTIN
  LMA-PA005 ABRASIVE WATERJET PATTERN CUTTING OF TITANIUM SHEET AND PLAT LOCKHEED MARTIN
  LMA-PA006 PROCESSING OF ALLOY STEELS TO 220 KSI UTS, AND HIGHER LOCKHEED MARTIN
  LMA-PA011 PROCESSING OF TITANIUM AND TITANIUM ALLOY STRUCTURAL PARTS LOCKHEED MARTIN
  LMA-PA013 PROCESSING OF PRECIPITATION HARDENING STAINLESS STEELS LOCKHEED MARTIN
  LMA-PA017 STANDARD MACHINING PRACTICES-TOLERANCES AND ALLOWANCES LOCKHEED MARTIN
  LMA-PA018 FORMING OF ALUMINUM ALLOYS, ENGINEERING AND INSPECTION REQUI C LOCKHEED MARTIN
  LMA-PA019 PROCESSING OF CARBON AND LOW ALLOY STEELS TO BELOW 220 KSI U LOCKHEED MARTIN
  LMA-PA020 SPECIAL COLDWORKING PROCESS C LOCKHEED MARTIN
  LMA-PA024 ADDITIVE MANUFACTURING PREFORM PROCESSES FOR TITANIUM ALLOY LOCKHEED MARTIN
  LMA-PA041 FORGING PROCESS, ENGINEERING AND INSPECTION REQUIREMENTS F LOCKHEED MARTIN
  LMA-PA045 CASTINGS, AEROSPACE SUPPORT EQUIPMENT ENGINEERING AND INSPEC LOCKHEED MARTIN
  LMA-PA051 CHEMICAL MILLING OF METALS A LOCKHEED MARTIN
  LMA-PA052 FORMING OF TITANIUM, ENGINEERING AND INSPECTION REQUIREMENTS A LOCKHEED MARTIN
  LMA-PA054 FORMING OF FERROUS AND NICKEL ALLOYS, ENGINEERING AND INSPEC LOCKHEED MARTIN
  LMA-PA090 CASTINGS, AEROSPACE QUALITY, ENGINEERING AND INSPECTION REQU A LOCKHEED MARTIN
  LMA-PA307 SUPERPLASTIC FORMING (SPF) OF TITANIUM ALLOYS A LOCKHEED MARTIN
  LMA-PA405 TUMBLE AND VIBRATORY DEBURRING OF AIRCRAFT PARTS LOCKHEED MARTIN
  LMA-PA410 DRILLING/REAMING AND GRINDING OF HIGH STRENGTH STEEL AND GRI LOCKHEED MARTIN
  LMA-PA411 STANDARD MACHINING PRACTICES, TOLERANCES LOCKHEED MARTIN
  LMA-PB001 BOLT, SCREW, AND NUT INSTALLATION, GENERAL REQUIREMENTS FOR D LOCKHEED MARTIN
  LMA-PB002 TUBE AND HOSE INSTALLATION E LOCKHEED MARTIN
  LMA-PB003 INSTALLATION OF PLUMBING LINES LOCKHEED MARTIN
  LMA-PB004 FASTENER INSTALLATION, SOLID RIVETS, BLIND RIVETS, AND BLIND E LOCKHEED MARTIN
  LMA-PB005 INSTALLATION PROCEDURE FOR CLAMPS E LOCKHEED MARTIN
  LMA-PB006 INSTALLATION PROCEDURE FOR SWAGED GROMMETS D LOCKHEED MARTIN
  LMA-PB007 LOCKBOLTS, INSTALLATION OF A LOCKHEED MARTIN
  LMA-PB009 PERMANENT TUBE JOINT INSTALLATION, EXTERNAL SWAGE TYPE C LOCKHEED MARTIN
  LMA-PB010 COUPLING INSTALLATION, BULKHEAD D LOCKHEED MARTIN
  LMA-PB013 COUPLING INSTALLATION, FLEXIBLE B LOCKHEED MARTIN
  LMA-PB016 INSTALLATION PROCEDURES FOR FIREWALL MATERIALS LOCKHEED MARTIN
  LMA-PB018 INSTALLATION OF HIGH TEMPERATURE INSULATION LOCKHEED MARTIN
  LMA-PB019 FASTENER SEALING AND INSTALLATION A LOCKHEED MARTIN
  LMA-PB020 INSTALLATION OF STRUCTURAL PANEL FASTENERS C LOCKHEED MARTIN
  LMA-PB023 INSTALLATION OF BEARINGS STAKED AND SWAGED B LOCKHEED MARTIN
  LMA-PB024 SWAGING AND FERRULE INSTALLATION LOCKHEED MARTIN
  LMA-PB025 FASTENER INSTALLATION, SOLID CORE BLIND BOLTS A LOCKHEED MARTIN
  LMA-PB026 FASTENER INSTALLATION 100 DEG FLUSH HEAD PIN WITH FLUSH SLEE LOCKHEED MARTIN
  LMA-PB027 INSERT INSTALLATION, SCREW THREAD, M45932/1 AND M45932/3 A LOCKHEED MARTIN
  LMA-PB028 COLD WORKING OF HOLES, ENGINEERING AND INSPECTION REQUIREMEN B LOCKHEED MARTIN
  LMA-PB029 INSTALLATION OF EXPANDED BUSHINGS IN METALLIC STRUCTURES D LOCKHEED MARTIN
  LMA-PB030 INSTALLATION OF POLYURETHANE AIR DUCT INSULATION D LOCKHEED MARTIN
  LMA-PB032 INSTALLATION OF BLIND BOLTS FOR HOLE FILLING A LOCKHEED MARTIN
  LMA-PB033 INSTALLING, SEALING, AND COATING OF BEARINGS CHILLED TO SUB- C LOCKHEED MARTIN
  LMA-PB034 DECALS FOR AIRCRAFT, APPLICATION OF LOCKHEED MARTIN
  LMA-PB035 INSTALLATION PROCEDURES FOR FIRE RESISTANT DUCT INSULATION C LOCKHEED MARTIN
  LMA-PB036 TORQUE REQUIREMENTS FOR INSTALLATION OF FASTENERS, AND OTHER B LOCKHEED MARTIN
  LMA-PB037 INSTALLATION OF EXPANDED FUEL FITTINGS D LOCKHEED MARTIN
  LMA-PB039 INSULATION OF FLUID LINES F LOCKHEED MARTIN
  LMA-PB040 INSTALLATION PROCEDURES FOR INSULATION BLANKETS A LOCKHEED MARTIN
  LMA-PB041 RUE PINS, INSTALLATION OF LOCKHEED MARTIN
  LMA-PB045 FASTENER INSTALLATION, CAPTIVE SCREWS, FLARED END TYPE B LOCKHEED MARTIN
  LMA-PB089 APPLICATION OF POLYURETHANE RAIN EROSION RESISTANT TAPE AND LOCKHEED MARTIN
  LMA-PB105 PROCESS SPECIFICATION FOR INSTALLATION OF HIGH TEMPERATURE, C LOCKHEED MARTIN
  LMA-PB108 INSTALLATION PROCEDURE FOR RADIUS BLOCKS A LOCKHEED MARTIN
  LMA-PC001 REQUIREMENTS FOR ULTRASONIC INSPECTION OF BONDED AND COMPOSI B LOCKHEED MARTIN
  LMA-PC002 REQUIREMENTS FOR EDDY CURRENT INSPECTION B LOCKHEED MARTIN
  LMA-PC005 INSPECTION, ACCEPTANCE CRITERIA, FOR COMPOSITE PARTS AND ASS B LOCKHEED MARTIN
  LMA-PC006 INSPECTION, DEMONSTRATION REQUIREMENTS FOR NONDESTRUCTIVE IN LOCKHEED MARTIN
  LMA-PC007 REQUIREMENTS FOR MAGNETIC PARTICLE INSPECTION PROCEDURES A LOCKHEED MARTIN
  LMA-PC008 REQUIREMENTS FOR ULTRASONIC INSPECTION PROCEDURES LOCKHEED MARTIN
  LMA-PC009 HARDNESS AND CONDUCTIVITY TESTING, NONDESTRUCTIVE METHODS K LOCKHEED MARTIN
  LMA-PC010 ACID ETCH INSPECTION OF STEEL PARTS LOCKHEED MARTIN
  LMA-PC012 INSPECTION, EDDY CURRENT OF FRACTURE/DURABILITY CRITICAL PIN A LOCKHEED MARTIN
  LMA-PC014 INSPECTION, ULTRASONIC, PROCEDURE FOR EMBEDDED CORE BOND LIN A LOCKHEED MARTIN
  LMA-PC019 AMMONIUM BIFLUORIDE ETCH INSPECTION OF TITANIUM ALLOYS LOCKHEED MARTIN
  LMA-PC201 REQUIREMENTS FOR FLUORESCENT PENETRANT INSPECTION OF METALLI E LOCKHEED MARTIN
  LMA-PC301 RADIOGRAPHIC INSPECTION, GENERAL REQUIREMENTS FOR B LOCKHEED MARTIN
  LMA-PC401 SHEAROGRAPHY NON-DESTRUCTIVE INSPECTION A LOCKHEED MARTIN
  LMA-PC803 PRESSURE TESTING OF NON-FERROUS CASTINGS LOCKHEED MARTIN
  LMA-PD001 HEAT TREATMENT OF AERMET 100 STEEL A LOCKHEED MARTIN
  LMA-PD020 HEAT TREATMENT AND PROCESSING OF COPPER AND COPPER ALLOYS A LOCKHEED MARTIN
  LMA-PE004 BRAZING OF ALUMINUM LOCKHEED MARTIN
  LMA-PE006 FRICTION STIR WELDING OF ALUMINUM ALLOY BUTT JOINTS LOCKHEED MARTIN
  LMA-PE007 ELECTRON BEAM WELDING A LOCKHEED MARTIN
  LMA-PF003 REPAIR OF FUEL TANK LEAKS A LOCKHEED MARTIN
  LMA-PF006 BLOCKING OF GAPS IN NON-FUEL AREAS OF AIRCRAFT STRUCTURE A LOCKHEED MARTIN
  LMA-PF007 PROCEDURE FOR APPLICATION OF SILICONE BASED HIGH TEMPERATURE LOCKHEED MARTIN
  LMA-PF008 PROCESS FOR APPLICATION OF POLYURETHANE FOAM IN PLACE MATERI LOCKHEED MARTIN
  LMA-PF011 REPROCESSING OF FUEL TANK PRESSURE LEAKS ON F-35 AND OTHER L LOCKHEED MARTIN
  LMA-PG001 REQUIREMENTS FOR ETCH/CLEANING PRIOR TO PENETRANT INSPECTION B LOCKHEED MARTIN
  LMA-PG004 SURFACE PREPARATION OF PARTS FOR ADHESIVE BONDING A LOCKHEED MARTIN
  LMA-PG010 CLEANLINESS AND PACKAGING REQUIREMENTS FOR OXYGEN SYSTEM TUB A LOCKHEED MARTIN
  LMA-PG101 CLEANING OF CORROSION AND HEAT RESISTANT ALLOYS AND NICKEL & A LOCKHEED MARTIN
  LMA-PG201 CLEANING OF CARBON AND LOW ALLOY STEELS A LOCKHEED MARTIN
  LMA-PG301 CLEANING OF ALUMINUM AND ALUMINUM ALLOYS A LOCKHEED MARTIN
  LMA-PG401 CLEANING OF TITANIUM AND TITANIUM ALLOYS A LOCKHEED MARTIN
  LMA-PG701 CLEANING OF COPPER AND COPPER ALLOYS A LOCKHEED MARTIN
  LMA-PH010 PLATING, CORROSION RESISTANT LOCKHEED MARTIN
  LMA-PH016 CONVERSION COATING OF TITAMIUM ALLOYS LOCKHEED MARTIN
  LMA-PH021 SULFAMATE-NICKEL PLATING, ELECTROLYTIC FOR LOW AND HIGH HEAT A LOCKHEED MARTIN
  LMA-PH024 NICKEL AND CADMIUM PLATING, ELECTRO-DEPOSITED STYLUS APPLIED LOCKHEED MARTIN
  LMA-PH029 CHEMICAL FILM TREATMENT, COLORED, NON-IMMERSION, FOR ALUMINU A LOCKHEED MARTIN
  LMA-PH090 THIN FILM SULFURIC ACID ANODIZE TREATMENT FOR ALUMINUM AND A B LOCKHEED MARTIN
  LMA-PH206 HARD ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS LOCKHEED MARTIN
  LMA-PH208 SULFURIC ACID ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS A LOCKHEED MARTIN
  LMA-PH211 PHOSPHORIC ACID ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS A LOCKHEED MARTIN
  LMA-PH301 PASSIVATION OF CORROSION RESISTANT STEEL LOCKHEED MARTIN
  LMA-PH302 PHOSPHATE COATING FOR FERROUS METALS A LOCKHEED MARTIN
  LMA-PJ001 APPLICATION OF THERMAL BARRIER COATING A LOCKHEED MARTIN
  LMA-PJ006 CORROSION PREVENTIVE COMPOUNDS, APPLICATION OF A LOCKHEED MARTIN
  LMA-PJ012 APPLICATION OF PRIMER COATINGS A LOCKHEED MARTIN
  LMA-PJ013 TOUCHUP REQUIREMENTS FOR CHEMICAL AND ORGANIC FINISHES B LOCKHEED MARTIN
  LMA-PJ015 INTEGRAL FUEL TANK COATING, PREPARATION AND APPLICATION OF LOCKHEED MARTIN
  LMA-PJ016 APPLICATION OF ORGANIC COATINGS LOCKHEED MARTIN
  LMA-PJ017 FINISHING OF PLASTIC PARTS AND ASSEMBLIES A LOCKHEED MARTIN
  LMA-PJ020 APPLICATION OF HIGH TEMPERATURE PRIMER A LOCKHEED MARTIN
  LMA-PJ021 APPLICATION OF HIGH TEMPERATURE EXTERIOR TOPCOAT A LOCKHEED MARTIN
  LMA-PJ037 APPLICATION OF LMA-MR008, PTFE FILLED COATINGS A LOCKHEED MARTIN
  LMA-PJ121 APPLICATION OF LMA-MR006 POLYURETHANE INSULATION COATING A LOCKHEED MARTIN
  LMA-PJ516 APPLICATION AND REMOVAL OF TEMPERATURE PROTECTIVE COATINGS A LOCKHEED MARTIN
  LMA-PJ901 APPLICATION OF SCALE INHIBITING COMPOUND A LOCKHEED MARTIN
  LMA-PK001 INSTALLATION OF STRAIN GAGES A LOCKHEED MARTIN
  LMA-PK004 INSTALLATION PROCEDURE FOR BONDED NUTPLATES F LOCKHEED MARTIN
  LMA-PK005 APPLICATION OF CASTING RESIN TO BONDED ASSEMBLIES LOCKHEED MARTIN
  LMA-PK006 PROCESS AND QUALITY CONTROL OF 350 DEG CURE SECONDARILTY ADH LOCKHEED MARTIN
  LMA-PK007 PROCESS AND QUALITY CONTROL OF ADHESIVE BONDED ASSEMBLIES D LOCKHEED MARTIN
  LMA-PK008 PROCESS GUIDLINES FOR LOCKHEED MARTIN
  LMA-PK009 BONDING OF LOAD PADS FOR STRUCTURAL TESTING LOCKHEED MARTIN
  LMA-PK010 BONDING CLOSED CELL RUBBER LOAD PADS FOR STRUCTURAL TESTING A LOCKHEED MARTIN
  LMA-PK012 BONDING WITH GENERAL PURPOSE ADHESIVES B LOCKHEED MARTIN
  LMA-PK013 BONDING WTIH SILICONE ADHESIVES C LOCKHEED MARTIN
  LMA-PK016 PROCESS AND QUALITY CONTROL OF CO BONDED ASSEMBLIIES LOCKHEED MARTIN
  LMA-PK021 WIRE ROPE, SLEEVE SWAGING- EYE AND LAP SPLICE A LOCKHEED MARTIN
  LMA-PK022 PROCESS AND QUALITY CONTROL OF OVEN CURING C LOCKHEED MARTIN
  LMA-PL001 APPLICATION OF SOLID AND LIQUID SHIM MATERIAL IN MISMATCH OF B LOCKHEED MARTIN
  LMA-PL003 MANUFACTURE OF OF NONMETALLIC HONEYCOMB CORE DETAILS D LOCKHEED MARTIN
  LMA-PL004 FABRICATION AND ACCEPTANCE OF COCURE FIBER REINFORCED BMI/NO LOCKHEED MARTIN
  LMA-PL005 MANUFACTURE AND QUALITY CONTROL OF 355 F CURE EPOXY COMPOSIT LOCKHEED MARTIN
  LMA-PL006 MANUFACTURE AND QUALITY CONTROL OF BMI COMP STRUCTURE LOCKHEED MARTIN
  LMA-PL010 DRILLING AND MACHINING OF COMPOSITE AND COMPOSITE/METAL STAC LOCKHEED MARTIN
  LMA-PL011 FASTENER HOLES IN COMPOSITE AND METAL STRUCTURE, PREPARATION C LOCKHEED MARTIN
  LMA-PL014 OUT OF AUTOCLAVE FABRICATION OF PI PREFORM JOINT BY RESIN FI C LOCKHEED MARTIN
  LMA-PL017 MANUFACTUJRE OF ALUMINUM HONEYCOMB CORE DETAILS LOCKHEED MARTIN
  LMA-PL018 FORMING OF THERMOPLASTIC PARTS LOCKHEED MARTIN
  LMA-PL019 SELECTIVE LASER SINTERING PROCESS, THERMPOLASTIC PARTS B LOCKHEED MARTIN
  LMA-PL021 MANUFACTURE AND QUALITY CONTROL OF OVEN CURED EPOXY COMPOSIT D LOCKHEED MARTIN
  LMA-PL022 PROCESSING AND QUALITY CONTROL OF LMA-MV004 POLYETHLYENE FOA LOCKHEED MARTIN
  LMA-PL023 FABRICATION OF LMA-MB009 POLYIMIDE/GLASS LAMINATES AND DETAI A LOCKHEED MARTIN
  LMA-PL025 MOLDING PROCESS, THERMOPLASTIC PARTS LOCKHEED MARTIN
  LMA-PL026 GLASS REINFORCED PLASTIC PARTS, PROCESSING AND QUALITY CONTR A LOCKHEED MARTIN
  LMA-PL028 MANUFACTURE AND QUALITY CONTROL OF QUARTZ/CYANATE ESTER COMP LOCKHEED MARTIN
  LMA-PL029 PROCESSING OF CARBON FIBER REINFORCED POLYETHERETHERKETONE ( LOCKHEED MARTIN
  LMA-PL208 FABRICATION OF CARBON AND GLASS FABRIC REINFORCED PLASTIC AI LOCKHEED MARTIN
  LMA-PL400 COMPOSITE SURFACE PREPARATION BY MEDIA BLAST PROCESS A LOCKHEED MARTIN
  LMA-PL401 FABRICATION OF POLYIMIDE/GLASS AND POLYIMIDE/QUARTZ LAMINATE LOCKHEED MARTIN
  LMA-PL404 Z-PINNING OF COMPOSITE PREFORMS LOCKHEED MARTIN
  LMA-PM005 LUBRICANT, SOLID FILM, AIR-DRYING AND HEAT-CURED, APPLICATIO LOCKHEED MARTIN
  LMA-PN002 APPLICATION PROCEDURES FOR TUBE MARKING TAPES LOCKHEED MARTIN
  LMA-PN006 APPLICATION OF ADHESIVE BACKED NAMEPLATES AND DECALS LOCKHEED MARTIN
  LMA-PN007 PART BAR CODE MARKING A LOCKHEED MARTIN
  LMA-PN008 ITEM UNIQUE IDENTIFICATION OF AIRCRAFT ITEMS D LOCKHEED MARTIN
  LMA-PN010 FABRICATION OF UNIQUE IDENTIFICATION NAMEPLATES OF AIRCRAFT LOCKHEED MARTIN
  LMA-PN407 APPLICATION OF POLYURETHANE STENCIL ENAMEL LOCKHEED MARTIN
  LMA-PR002 OVERBRAIDING ON WIRE BUNDLES D LOCKHEED MARTIN
  LMA-PR003 DESIGN, MANUFACTURE, INSTALLATION, AND TESTING OF AIRCRAFT H B LOCKHEED MARTIN
  LMA-PR005 MANUFACTURE OF ELECTRICAL AIRCRAFT HARNESSES G LOCKHEED MARTIN
  LMA-PR006 IN PROCESS ELECTRICAL TESTING C LOCKHEED MARTIN
  LMA-PR007 CABLE AND SHIELD TERMINATIONS E LOCKHEED MARTIN
  LMA-PR009 INSTALLATION OF FIBER OPTIC CABLE HARNESSES A LOCKHEED MARTIN
  LMA-PR011 ELECTRICAL CONDUIT, ASSEMBLY AND INSTALLATION LOCKHEED MARTIN
  LMA-PR012 HIGH PERFORMANCE COAXIAL CABLE ASSEMBLY AND INSTALLATION F LOCKHEED MARTIN
  LMA-PR013 HIGH PERFORMANCE COAXIAL CABLE TESTING LOCKHEED MARTIN
  LMA-PR020 IN-PROCESS FIBER OPTIC TESTING B LOCKHEED MARTIN
  LMA-PR021 FIBER OPTIC CABLE TERMINATION A LOCKHEED MARTIN
  LMA-PR022 INSTRUCTIONS FOR MANUFACTURE OF FIBER OPTIC HARNESSES B LOCKHEED MARTIN
  LMA-PR025 FIBER OPTIC TERMINI/MT CONNECTOR END FACE QUALITY REQUIREMEN LOCKHEED MARTIN
  LMA-PR026 REWORK OF WIRE AND FIBER OPTIC HARNESSES B LOCKHEED MARTIN
  LMA-PT008 STANDARD TEST PROCEDURES FOR REINFORCED PLASTIC, ADHESIVES, B LOCKHEED MARTIN
  LMA-PT009 COMPOSITE MATERIALS, BATCH ACCEPTANCE TEST METHODS FOR B LOCKHEED MARTIN
  LMA-PT013 DIMENSIONAL CONTROL OF CASTINGS AND FORGINGS LOCKHEED MARTIN
  LMA-PU305 PROTECTION OF PARTS AND MATERIALS IN STORAGE LOCKHEED MARTIN
  LMA-PY001 COMPOSITE FABRICATION FACILITY A LOCKHEED MARTIN
  LMA-QA020 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PA020 QPL LOCKHEED MARTIN
  LMA-QB016 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PB016 QPL LOCKHEED MARTIN
  LMA-QB028 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PB028 QPL LOCKHEED MARTIN
  LMA-QH010 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PH010 QPL LOCKHEED MARTIN
  LMA-QH090 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PH090 QPL LOCKHEED MARTIN
  LMA-QL003 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PH003 QPL LOCKHEED MARTIN
  LMA-QL019 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PH019 QPL LOCKHEED MARTIN
  LMA-QL025 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PH025 QPL LOCKHEED MARTIN
  LMA-QL026 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PL026 A LOCKHEED MARTIN
  LMA-QN008 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PN008 QPL LOCKHEED MARTIN
  LMA-QT001 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PT001 QPL LOCKHEED MARTIN
  LMA-QT008 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PT008 QPL LOCKHEED MARTIN
  LMA-QT009 LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PT009 QPL LOCKHEED MARTIN
  PM-5010 SUPPLIER/SELLER SHIPPING INSTRUCTIONS G LOCKHEED MARTIN
  TMS-MC-015 SUPPLIER TOOLING MANUAL 26 LOCKHEED MARTIN
  8000-CAS-1 INSTRUCTIONS FOR PW4168 CASCADE INSPECTION GAGE C MIDDLE RIVER
  8000-CAS-2 ULTRASONIC CONTACT A-SCAN PLAN PROCEDURE G MIDDLE RIVER
  8000-CAS-3 SHORT MEAN SHEAR TEST SAMPLING PLAN FOR FAN REVERSER MIDDLE RIVER
  PW-07-006 SPECIFICATION FOR COMPOSITE CASCADE SPEC MIDDLE RIVER
  STM-P-K100 MATERIAL SPECIFICATION FOR CORROSION- INHIBITING EPOXY PRIMER NEW MIDDLE RIVER
  STM-P-L100 MATERIAL SPEC/GRAPHIC TOW A MIDDLE RIVER
  STM-P-L102 MATERIAL SPECIFICATION FOR POWDER EPOXY RESIN A MIDDLE RIVER
  STM-P-L106 MATERIAL SPECIFICATION FOR LOW VISCOSITY EPOXY RESIN 250F SE A MIDDLE RIVER
  STM-P-L106 MATERIAL SPEC LOW VISC EPOXY NEW QPL MIDDLE RIVER
  STM-P-L107 MATERIAL SPEC WOVEN GRAPHITE A MIDDLE RIVER
  STM-P-L107 WOVEN GRAPHITE FABRIC AND BRAID QPL NEW MIDDLE RIVER
  STM-P-L118 MTL SPEC FOR TWO PART LOW VISC EPOXY NEW MIDDLE RIVER
  STM-P-L118 TWO-PART, LOW VISCOSITY, EPOXY ADHESIVE NEW QPL MIDDLE RIVER
  STP-45P101 PRCS IDENT MKG AIRCRAFT NACELLE PARTS NEW MIDDLE RIVER
  STP-75P102 STAND TEST METHODS FOR COMPOSITE MATERIALS A MIDDLE RIVER
  STP-75P108 PROCESS FOR FABRICATION OF RESIN TRANSFER MOLDED LAMINATES C MIDDLE RIVER
  10S500 F-5/F-20 AUTHORIZED PART SUBSTITUTIONS D NORTHROP GRUMMAN
  10S500 F-5/F-20 AUTHORIZED PART SUBSTITUTIONS D NORTHROP GRUMMAN
  10Y201 ACCEPTANCE STANDARD FOR MANUFACTURED PARTS 27 NORTHROP GRUMMAN
  10Y204 ACCEPTANCE STANDARD FOR SURFACE MISMATCHES 1 NORTHROP GRUMMAN
  1TD1134P20000
  SECONDARY BONDING OF TITANIUM DETAILS TO CARBON EPOXY LAMINATES UTILIZING
  AUTOCLAVE CURED FILM ADHESIVE – NORTHROP GRUMMAN
  3NG0098 STUD BOLT, PAN HEAD, TORX© RECESS, A286 CRES 21-Jul-06 NORTHROP GRUMMAN
  57B100 BOLT, BLIND, FLUSH HEAD (SELF-LOCKING) 22 NORTHROP GRUMMAN
  60S600 SPACER, NUT PLATE 9 NORTHROP GRUMMAN
  9NG0018 SPACER, RING AND DOT – FORM IN PLACE SEAL 7-Apr-06 NORTHROP GRUMMAN
  ACS-FRS-1000 GENERAL WEAPON SYSTEM FINISH REQUIREMENTS SPECIFICATION E NORTHROP GRUMMAN
  ACS-FRS-1000.01 GENERAL WEAPON SYSTEM FINISH REQUIREMENTS SPECIFICATION FOR PRIMARY BONDED
  STRUCTURE
  ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-10001 CONSUMABLE MATERIALS FOR ADHESIVE BONDING AND COMPOSITE FABRICATION G NORTHROP GRUMMAN
  ACS-MRS-10001.01 MATERIAL SPECIFICATION FOR CONSUMABLE MATERIALS FOR ADHESIVE BONDING AND
  COMPOSITE FABRICATION – CONTROLLED IMPREGNATED PEEL PLY
  B NORTHROP GRUMMAN
  ACS-MRS-10001.03 Material Specification for Approved Consumable Materials List for Composite Fabrication of Primary
  Bonded Structure
  Original Issue NORTHROP GRUMMAN
  ACS-MRS-10001.04 MATERIAL SPECIFICATION FOR CONSUMABLE MATERIALS FOR ADHESIVE BONDING AND
  COMPOSITE FABRICATION, PEEL PLY (DIATEX 1500) FOR PRIMARY EPOXY STRUCTURE ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-10002 SOLVENTS, CLEANING A NORTHROP GRUMMAN
  ACS-MRS-1204 TITANIUM ALLOY FORGING, B NORTHROP GRUMMAN
  ACS-MRS-1205 TITANIUM ALLOY PLATE, ANNEALED A NORTHROP GRUMMAN
  ACS-MRS-2001 MATERIAL SPECIFICATION – STRUCTURAL ADHESIVE FOR 250F SERVICE APPLICATIONS C NORTHROP GRUMMAN
  ACS-MRS-2009 MATERIAL SPECIFICATION – STRUCTURAL ADHESIVE FOR 180F SERVICE APPLICATIONS E NORTHROP GRUMMAN
  ACS-MRS-2010 FILM ADHESIVE, BISMAELIMIDE ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-2011 FILM ADHESIVE, HIGH TEMPERATURE BISMAELIMIDE A NORTHROP GRUMMAN
  ACS-MRS-2012 STRUCTURAL, FILM ADHESIVE, 500°F SERVICE, POLYIMIDE B NORTHROP GRUMMAN
  ACS-MRS-2014 CYANATE ESTER FILM ADHESIVE A NORTHROP GRUMMAN
  ACS-MRS-2015 MATERIAL SPECIFICATION FOR ADDITION CURE SILICONE FILM ADHESIVE A NORTHROP GRUMMAN
  ACS-MRS-2016 STRUCTURAL ADHESIVE, 250°F – 350°F DUAL CURE ORIGINAL ISSUE : CN A009 NORTHROP GRUMMAN
  ACS-MRS-2019 STRUCTURAL ADHESIVE, 350°F VACUUM BAG ONLY (VBO) CURE C* NORTHROP GRUMMAN
  ACS-MRS-2103 ADHESIVE, TWO-PART EPOXY PASTE, ROOM TEMPERATURE CURING J NORTHROP GRUMMAN
  ACS-MRS-2104 ADHESIVE, BISMALIDE (BMI) PASTE A NORTHROP GRUMMAN
  ACS-MRS-2111 ADHESIVE, EPOXY PASTE, THIXOTROPIC ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-2114 TWO PART EPOXY PASTE ADHESIVE FOR STRUCTURAL BONDING D NORTHROP GRUMMAN
  ACS-MRS-2201 ADHESIVE, MODIFIED EPOXY, EXPANDABLE F NORTHROP GRUMMAN
  ACS-MRS-2204 ADHESIVE, POLYIMIDE, EXPANDABLE ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-2205 MATERIAL SPECIFICATION FOR EPOXY SURFACING FILM B NORTHROP GRUMMAN
  ACS-MRS-2206 MATERIAL SPECIFICATION FOR LIQUID SHIM ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-2304 MATERIAL SPECIFICATION FOR ADHESIVE BOND PRIMER A NORTHROP GRUMMAN
  ACS-MRS-3101 TOPCOAT, POLYURETHANE A NORTHROP GRUMMAN
  ACS-MRS-5001 CARBON FIBER, EPOXY IMPREGNATED, 250°F CURE, STANDARD MODULUS, MODERATE IMPACT
  RESISTANT, FABRIC
  G : CN A132 NORTHROP GRUMMAN
  ACS-MRS-5002 CARBON FIBER, EPOXY IMPREGNATED, 250 DEGREE F CURE, HIGH MODULUS, MODERATE IMPACT
  RESISTANT, UNIDIRECTIONAL TAPE
  F : CN A140 NORTHROP GRUMMAN
  ACS-MRS-5003 CARBON FIBER, EPOXY IMPREGNATED, 350 DEGREE F CURE, MODERATE IMPACT
  RESISTANT,INTERMEDIATE MODULUS, UNIDIRECTIONAL TAPE
  F NORTHROP GRUMMAN
  ACS-MRS-5004 CARBON FIBER, EPOXY IMPREGNATED, 350 DEGREE F CURE, STANDARD MODULUS, MODERATE
  IMPACT RESISTANT, FABRIC
  E NORTHROP GRUMMAN
  ACS-MRS-5005 FIBERGLASS, EPOXY IMPREGNATED, 350 DEGREE F CURE, FABRIC FOR SURFACE BARRIER OR
  ISOLATION PLY
  F NORTHROP GRUMMAN
  ACS-MRS-5006 CONDUCTIVE FIBER MAT, EPOX Y IMPREGNATED, 350 DEGREE F CURE B NORTHROP GRUMMAN
  ACS-MRS-5007 CARBON FIBER, BISMALEIMIDE IMPREGNATED, UNIDIRECTIONAL TAPE E NORTHROP GRUMMAN
  ACS-MRS-5008 CARBON FIBER, BISMALEIMIDE IMPREGNATED, FABRIC D NORTHROP GRUMMAN
  ACS-MRS-5009 FIBERGLASS, BISMALEIMIDE RESIN IMPREGNATED, FABRIC F NORTHROP GRUMMAN
  ACS-MRS-5010 FIBERGLASS, BISMALEIMIDE IMPREGNATED, FABRIC FOR SURFACE BARRIER OR ISOLATION PLY B NORTHROP GRUMMAN
  ACS-MRS-5011 CONDUCTIVE FIBER MAT, BISMALEIMIDE IMPREGNATED C NORTHROP GRUMMAN
  ACS-MRS-5012 QUARTZ, CYANATE ESTER IMPREGNATED, 350°F CURE, FABRIC C : CN A065 NORTHROP GRUMMAN
  ACS-MRS-5015 CARBON FIBER FABRIC, POLYIMIDE IMPREGNATED B NORTHROP GRUMMAN
  ACS-MRS-5016 QUARTZ FIBER FABRIC, POLYIMIDE IMPREGNATED C NORTHROP GRUMMAN
  ACS-MRS-5019 STANDARD MODULUS CARBON FIBER UNIDIRECTIONAL TAPE, EPOXY IMPREGNATED, OUT-OFAUTOCLAVE CURE
  B NORTHROP GRUMMAN
  ACS-MRS-5020 STANDARD MODULUS CARBON FIBER FABRIC, EPOXY IMPREGNATED, OUT-OF AUTOCLAVE CURE D NORTHROP GRUMMAN
  ACS-MRS-5021 FIBERGLASS FABRIC, EPOXY IMPREGNATED, OUT-OF-AUTOCLAVE CURE A NORTHROP GRUMMAN
  ACS-MRS-5023 INTERMEDIATE MODULUS CARBON FIBER UNIDIRECTIONAL TAPE, EPOXY IMPREGNATED, OUT-OFAUTOCLAVE CURE
  C NORTHROP GRUMMAN
  ACS-MRS-5025 CARBON FIBER, HIGH TEMPERATURE BISMALEIMIDE IMPREGNATED, FABRIC D NORTHROP GRUMMAN
  ACS-MRS-5026 MATERIAL SPECIFICATION FOR FIBERGLASS, HIGH TEMPERATURE BISMALEIMIDE RESIN
  IMPREGNATED, FABRIC
  D NORTHROP GRUMMAN
  ACS-MRS-5027 FIBERGLASS, HIGH TEMPERATURE BISMALEIMIDE IMPREGNATED, FABRIC FOR SURFACE BARRIER
  OR ISOLATION PLY
  B NORTHROP GRUMMAN
  ACS-MRS-5028 QUARTZ, HIGH TEMPERATURE BISMALEIMIDE RESIN IMPREGNATED, FABRIC B NORTHROP GRUMMAN
  ACS-MRS-5029 CARBON FIBER, EPOXY IMPREGNATED, 350 DEGREE F CURE, MODERATE IMPACT RESISTANT,
  STANDARD MODULUS, UNIDIRECTIONAL TAPE
  ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-5031 QUARTZ, EPOXY IMPREGNATED, 250°F CURE, FABRIC B NORTHROP GRUMMAN
  ACS-MRS-5038 STANDARD AND INTERMEDIATE MODULUS CARBON FIBER FABRIC, LOW FLOW TOUGHENED
  EPOXY IMPREGNATED
  A NORTHROP GRUMMAN
  ACS-MRS-5039 FIBERGLASS, LOW FLOW TOUGHENED EPOXY IMPREGNATED FABRIC FOR SURFACE BARRIER OR
  ISOLATION PLY
  E NORTHROP GRUMMAN
  ACS-MRS-5040 FIBERGLASS FABRIC, LOW FLOW TOUGHENED EPOXY IMPREGNATED A NORTHROP GRUMMAN
  ACS-MRS-5041 INTERMEDIATE MODULUS CARBON FIBER FABRIC, LOW FLOW TOUGHENED EPOXY IMPREGNATED C NORTHROP GRUMMAN
  ACS-MRS-5042 INTERMEDIATE MODULUS CARBON FIBER UNIDIRECTIONAL TAPE, LOW FLOW TOUGHENED EPOXY
  IMPREGNATED
  C NORTHROP GRUMMAN
  ACS-MRS-5043 QUARTZ, LOW FLOW TOUGHENED EPOXY IMPREGNATED, FABRIC ORIGINAL ISSUE : CN A079 NORTHROP GRUMMAN
  ACS-MRS-5044 FIBERGLASS, OUT-OF-AUTOCLAVE RESIN IMPREGNATED FABRIC FOR SURFACE BARRIER OR
  ISOLATION PLY
  B NORTHROP GRUMMAN
  ACS-MRS-5045 Intermediate Modulus Carbon Fiber, Fiber Placement Material, Epoxy Impregnated, Low Flow
  Toughened Epoxy Impregnated
  ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-5050 MODIFIED EPOXY RESIN IMPREGNATED, QUARTZ FABRIC 350°F CURE FOR RADOME APPLICATIONS
  HIGH PERFORMANCE MODIFIED EPOXY RESIN
  D : CN A120 NORTHROP GRUMMAN
  ACS-MRS-5051 FIBERGLASS, EPOXY IMPREGNATED, 250 DEGREE F CURE, RADOME APPLICATIONS, FABRIC B NORTHROP GRUMMAN
  ACS-MRS-5052 STANDARD MODULUS CARBON FIBER FABRIC, EPOXY IMPREGNATED, OUT-OF- AUTOCLAVE 350°F
  CURE C NORTHROP GRUMMAN
  ACS-MRS-5053 STANDARD MODULUS CARBON FIBER, UNIDIRECTIONAL TAPE, EPOXY IMPREGNATED, OUT-OFAUTOCLAVE 350° CURE
  ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-5054 INTERMEDIATE MODULUS CARBON FIBER, UNIDIRECTIONAL TAPE, EPOXY IMPREGNATED, OUT-OFAUTOCLAVE 350°F CURE
  B NORTHROP GRUMMAN
  ACS-MRS-5055 FIBERGLASS FABRIC, EPOXY IMPREGNATED, OUT-OF-AUTOCLAVE 350°F CURE B NORTHROP GRUMMAN
  ACS-MRS-5056 FIBERGLASS, OUT-OF-AUTOCLAVE, 350°F CURE, EPOXY RESIN IMPREGNATED FABRIC FOR
  SURFACE BARRIER OR ISOLATION PLY
  B NORTHROP GRUMMAN
  ACS-MRS-5057 Intermediate Modulus Carbon Fiber, Fiber Placement Material, Epoxy Impregnated, Out-Of- Autoclave
  350°F Cure
  A : CN A119 NORTHROP GRUMMAN
  ACS-MRS-5105 FIBERGLASS FABRIC D NORTHROP GRUMMAN
  ACS-MRS-5201 RESIN, EPOXY, FOR RESIN TRANSFER MOLDING A NORTHROP GRUMMAN
  ACS-MRS-5205 EPOXY RESIN, FILM C NORTHROP GRUMMAN
  ACS-MRS-5206 RESIN, EPOXY, FOR WET LAMINATE FABRICATION B NORTHROP GRUMMAN
  ACS-MRS-5301 CORE, HONEYCOMB, PARA-ARAMID U NORTHROP GRUMMAN
  ACS-MRS-5302 CORE, HONEYCOMB, FIBERGLASS BASE, POLYIMIDE COATED F NORTHROP GRUMMAN
  ACS-MRS-5303 FLEX-CORE, HONEYCOMB, GLASS/PHENOLIC B NORTHROP GRUMMAN
  ACS-MRS-5304 CORE, OVER EXPANDED HONEYCOMB, PARA-ARAMID BASE, PHENOLIC COATED ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-5402 CARBON FIBER, WOVEN THREE DIMENSIONAL PI PREFORMS B NORTHROP GRUMMAN
  ACS-MRS-5403 CARBON FIBER, WOVEN THREE DIMENSIONAL “L” PREFORMS ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-5406 CARBON FIBER, WOVEN THREE-DIMENSIONAL PI PREFORMS, OUT-OF-AUTOCLAVE EPOXY
  IMPREGNATED
  C NORTHROP GRUMMAN
  ACS-MRS-5408 MATERIAL SPECIFICATION FOR CARBON FIBER, WOVEN THREE-DIMENSIONAL PI PREFORMS E NORTHROP GRUMMAN
  ACS-MRS-5410 CARBON FIBER, WOVEN THREE-DIMENSIONAL PI PREFORMS, AUTOCLAVE 350°F CURE, EPOXY
  IMPREGNATED
  A NORTHROP GRUMMAN
  ACS-MRS-5601 POTTING COMPOUND, EPOXY, SYNTACTIC D RCI 200137 NORTHROP GRUMMAN
  ACS-MRS-5602 POTTING COMPOUND, BISMALEIMIDE, SYNTACTIC ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-MRS-5606 POTTING COMPOUND, EPOXY, NON-METALLIC FILLED C NORTHROP GRUMMAN
  ACS-MRS-5607 LOADED ADHESIVE FILLER, BISMALEMIDE (BMI) PASTE A : CN A082 NORTHROP GRUMMAN
  ACS-MRS-5701 EPOXY SYNTACTIC FILM C : CN A115 NORTHROP GRUMMAN
  ACS-MRS-5704 CLOSED CELL RIGID FOAM (POLYMETHACRYLIMIDE) (ROHACELL) D NORTHROP GRUMMAN
  ACS-MRS-7002 MATERIAL SPECIFICATION FOR SEALING COMPOUND, POLYSULFIDE SYNTHETIC RUBBER FOR
  INTEGRAL FUEL TANK AND FUEL CELL CAVITIES, HIGH STRENGTH, FOR INTERMITTENT USE TO
  B NORTHROP GRUMMAN
  ACS-MRS-7003 MATERIAL SPECIFICATION FOR SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL
  PURPOSE, INTERMITTENT USE TO 360F
  B NORTHROP GRUMMAN
  ACS-MRS-7004 SEALING COMPOUND, TEMPERATURE RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL
  CAVITIES, HIGH ADHESION
  B NORTHROP GRUMMAN
  ACS-MRS-7005 MATERIAL SPECIFICATION FOR SEALANT, ELECTRICALLY CONDUCTIVE D NORTHROP GRUMMAN
  ACS-MRS-7006 SEALING COMPOUND, POLYTHIOETHER RUBBER FUEL RESISTANT, FAST CURING, INTERMITTENT
  USE TO 360°
  C CN: A083 NORTHROP GRUMMAN
  ACS-MRS-7007 SEALING AND COATING COMPOUND, CORROSION INHIBITIVE ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-1001 MACHINE FINISH REQUIREMENTS H NORTHROP GRUMMAN
  ACS-PRS-1002 FORMING ALUMINUM ALLOYS E NORTHROP GRUMMAN
  ACS-PRS-1004 Fabrication of Sheet Metal Parts B* NORTHROP GRUMMAN
  ACS-PRS-1005 GRINDING HIGH STRENGTH STEEL AND CHROME PLATED HIGH STRENGTH STEEL A NORTHROP GRUMMAN
  ACS-PRS-1006 DRILLING, REAMING AND HONING HIGH STRENGTH STEEL A NORTHROP GRUMMAN
  ACS-PRS-1007 MACHINING OF METALLIC DETAIL PARTS AND ASSEMBLIES ORIGINAL ISSUE CN: A189 NORTHROP GRUMMAN
  ACS-PRS-1008 FORMING OF TITANIUM ALLOYS A CN:A358 NORTHROP GRUMMAN
  ACS-PRS-2001 STRUCTURAL ADHESIVE BONDING WITH EPOXY FILM ADHESIVE D NORTHROP GRUMMAN
  ACS-PRS-2004 Process Specification for Structural Adhesive Bonding with Epoxy Paste Adhesive C NORTHROP GRUMMAN
  ACS-PRS-2051 ADHESIVE BONDING OF NUTPLATES, STUDS, STANDOFFS, CABLE TIE MOUNTS AND BUSHINGS M NORTHROP GRUMMAN
  ACS-PRS-2052 NON-STRUCTURAL ADHESIVE BONDING WITH EPOXY PASTE ADHESIVE D NORTHROP GRUMMAN
  ACS-PRS-2101 PROCESS SPECIFICATION FOR ENVIRONMENTAL AND PRESSURE SEALING B NORTHROP GRUMMAN
  ACS-PRS-2102 PROCESS SPECIFICATION FOR APPLICATION OF LIQUID SHIM F NORTHROP GRUMMAN
  ACS-PRS-2103 PROCESS SPECIFICATION FOR SEALING BONDED HONEYCOMB CORE ASSEMBLIES C NORTHROP GRUMMAN
  ACS-PRS-2105 PROCESS SPECIFICATION FOR SEALING, FORM-IN-PLACE, FABRICATION OF C NORTHROP GRUMMAN
  ACS-PRS-2151 PROCESS SPECIFICATION FOR SEALING, INTEGRAL FUEL TANK AND FUEL CELL CAVITY D NORTHROP GRUMMAN
  ACS-PRS-2201 SURFACE PREPARATION FOR STRUCTURAL ADHESIVE BONDING C NORTHROP GRUMMAN
  ACS-PRS-2203 CLEANING, SURFACE TREATMENTS AND INORGANIC COATINGS FOR METALLIC SURFACES B NORTHROP GRUMMAN
  ACS-PRS-2204 CLEANING AND SURFACE PREPARATION OF TITANIUM AND TITANIUM ALLOYS B NORTHROP GRUMMAN
  ACS-PRS-2205 Process Specification for Stripping of Organic Coatings Original Issue NORTHROP GRUMMAN
  ACS-PRS-2207 Process Specification for Abrasive Cleaning Original Issue NORTHROP GRUMMAN
  ACS-PRS-2208 SOLVENT CLEANING ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-2301 MARKING OF FABRICATED PARTS AND ASSEMBLIES F NORTHROP GRUMMAN
  ACS-PRS-2304 UNIQUE IDENTIFICATION (UID) MARKING OF PARTS AND ASSEMBLIES L NORTHROP GRUMMAN
  ACS-PRS-3251 PROCESS SPECIFICATION FOR FINISHES, ORGANIC, APPLICATION AND CONTROL OF L CN: A180 NORTHROP GRUMMAN
  ACS-PRS-4002 Process Specification for Electrical Grounding and Electrical Bonding C NORTHROP GRUMMAN
  ACS-PRS-4003 PROTECTION OF ELECTROSTATIC DISCHARGE (ESD) SENSITIVE COMPONENTS, DEVICES, AND
  ASSEMBLIES
  E NORTHROP GRUMMAN
  ACS-PRS-4501 BEARINGS AND BUSHINGS, INSTALLATION OF G NORTHROP GRUMMAN
  ACS-PRS-5001 CURING PROCEDURES FOR COMPOSITE LAMINATES AND SANDWICH ASSEMBLIES D : CN A097, A182 NORTHROP GRUMMAN
  ACS-PRS-5003 CARBON FIBER REINFORCED EPOXY LAMINATES, 350F CURING, FABRIC C NORTHROP GRUMMAN
  ACS-PRS-5012 Process Specification for Wet Layup of Composites Laminates, Foam Core Sandwich Structures, and TType Joints
  F NORTHROP GRUMMAN
  ACS-PRS-5017 FABRICATION OF 350°F CURE, EPOXY LAMINATES UTILIZING OUT OF AUTOCLAVE PREPREGS E NORTHROP GRUMMAN
  ACS-PRS-5018 FABRICATION OF PI JOINT COMPOSITE STRUCTURES UTILIZING 350°F CURING OUT-OF-AUTOCLAVE
  MATERIALS
  E NORTHROP GRUMMAN
  ACS-PRS-5019 OUT-OF-AUTOCLAVE, 350°F GREEN TIE JOINT FABRICATION ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-5020 OUT-OF-AUTOCLAVE FIBER PLACED CARBON EPOXY LAMINATES, FABRICATION AND ACCEPTANCE
  OF
  ORIGINAL ISSUE : CN A125 NORTHROP GRUMMAN
  ACS-PRS-5051 FABRICATION OF SANDWICH COMPOSITE STRUCTURE FOR 250F CONTINU D NORTHROP GRUMMAN
  ACS-PRS-5053 NONMETALLIC HONEYCOMB DETAILS, MACHINING OF C NORTHROP GRUMMAN
  ACS-PRS-5055 FABRICATION OF POLYIMIDE COMPOSITE SANDWICH STRUCTURE B NORTHROP GRUMMAN
  ACS-PRS-5056 PROCESS SPECIFICATION FOR OUT-OF-AUTOCLAVE FABRICATION OF EPOXY COMPOSITE
  SANDWICH STRUCTURE
  E NORTHROP GRUMMAN
  ACS-PRS-5065 FABRICATION OF EPOXY COMPOSITE SANDWICH STRUCTURE, BONDED, COCURED, OR COBONDED
  UTILIZING OOA MATERIALS H NORTHROP GRUMMAN
  ACS-PRS-5065.02 INSTALLING INSERTS, HARDPOINTS, AND EDGE FILLER IN COMPOSITE SANDWICH STRUCTURE ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-5067 NONMETALLIC CORE DETAILS, FORMING OF ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6001 PREPARATION DRILLING, REAMING AND COUNTERSINKING OF ROUND HOLES IN METALLIC
  COMPONENTS AND ASSEMBLIES
  A NORTHROP GRUMMAN
  ACS-PRS-6002 HOLE PREPARATION, DRILLING C CN: A153 & A139 NORTHROP GRUMMAN
  ACS-PRS-6002.01
  CONTAMINATION FREE HOLE PREPARATION, DRILLING, MACHINING AND TRIMMING OF
  COMPOSITES AND COMPOSITE/METALLIC STRUCTURES B NORTHROP GRUMMAN
  ACS-PRS-6003 INSTALLATION OF BLIND RIVETS AND BLIND BOLTS G NORTHROP GRUMMAN
  ACS-PRS-6004 INSTALLATION OF SWAGED GROMMET C NORTHROP GRUMMAN
  ACS-PRS-6005 INSTALLATION OF LOCKBOLTS B NORTHROP GRUMMAN
  ACS-PRS-6006 INSTALLATION OF EDDIE BOLTS C NORTHROP GRUMMAN
  ACS-PRS-6007 INSTALLATION OF HI-LOK / HI-TIGUE / HI-LITE FASTENERS F NORTHROP GRUMMAN
  ACS-PRS-6009 INSTALLATION OF RADIAL-LOK BLIND FASTENERS A NORTHROP GRUMMAN
  ACS-PRS-6010 BLIND FASTENERS, INSTALLATION OF A NORTHROP GRUMMAN
  ACS-PRS-6012 INSTALLATION OF BOLTS AND NUTS F NORTHROP GRUMMAN
  ACS-PRS-6013 HIGH STRENGTH QUICK RELEASE FASTENERS, INSTALLATION OF D NORTHROP GRUMMAN
  ACS-PRS-6014 RIVETLESS NUTPLATES, BUSHINGS AND BLIND NUT ASSEMBLIES, INSTALLATION OF E NORTHROP GRUMMAN
  ACS-PRS-6015 SOLID RIVETS, INSTALLATION OF B NORTHROP GRUMMAN
  ACS-PRS-6016 SAFETYING PROCEDURES D NORTHROP GRUMMAN
  ACS-PRS-6017 ADJUSTABLE PRELOADED FASTENERS, INSTALLATION OF ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6018 STRUCTURAL PANEL FASTENER, LIVE LOCK, INSTALLATION OF ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6019 COLD WORKING HOLES, SPLIT SLEEVE METHOD ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6021 TERMINAL CABLE ASSEMBLIES ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6022 QUARTER TURN QUICK RELEASE FASTENERS, INSTALLATION OF ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6023 INSTALLING HELICAL COIL INSERTS B NORTHROP GRUMMAN
  ACS-PRS-6024 STRUCTURAL PANEL FASTENER, INSTALLATION OF ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6025 HINGE PINS, RETENTION OF ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6027 INSERTS AND STUDS LOCKED IN, KEY LOCKED ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6028 INSERT, SCREW, THREAD – THREAD FORMING ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6029 RETAINING RING INSTALLATION FOR CAPTIVE SCREW ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6030 INSTALLATION OF FLARED SLEEVE TYPE CAPTIVE SCREWS ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6031 PINS, SPRING, INSTALLATION OF ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-6032 PROCESS SPECIFICATION FOR INSTALLATION OF SUBSYSTEM BRACKETS ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-7001 Ultrasonic Inspection of Composites and Bonded Assemblies F: CN A123 NORTHROP GRUMMAN
  ACS-PRS-7002 TEMPER ETCH INSPECTION ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-7003 EDDY CURRENT INSPECTION FOR DEFECTS A NORTHROP GRUMMAN
  ACS-PRS-7005 PENETRANT INSPECTION D : CN A086 NORTHROP GRUMMAN
  ACS-PRS-7011 CARBON REINFORCED COMPOSITE A NORTHROP GRUMMAN
  ACS-PRS-7051 NONDESTRUCTIVE TESTING (NDT) PERSONNEL QUALIFICATION AND CERTIFICATION B NORTHROP GRUMMAN
  ACS-PRS-7059 DETERMINATION OF SURFACE CONDUCTIVITY OF SURFACE SURFACE ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-7101 NONDESTRUCTIVE INSPECTION OF COMPOSITE STRUCTURES A NORTHROP GRUMMAN
  ACS-PRS-8001 ACCEPTANCE AND STORAGE OF STRUCTURAL AND NON STRUCTURAL ADHESIVES AND
  PREPREGS
  K NORTHROP GRUMMAN
  ACS-PRS-8002 AREA REQUIREMENTS FOR ADHESIVE BONDING AND COMPOSITE FABRICA C NORTHROP GRUMMAN
  ACS-PRS-8003 Process Specification for Packaging, Handling and Storage of Critical Parts B NORTHROP GRUMMAN
  ACS-PRS-8004 PROTECTION OF PARTS DURING ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-PRS-8005 COMPOSITE TOOLING PREPARATION B NORTHROP GRUMMAN
  ACS-PRS-9002 PROCESS SPECIFICATION FOR TEMPERATURE EXPOSURE LIMITS DURING COMPOSITE ASSEMBLY
  PROCESSES
  Original Issue NORTHROP GRUMMAN
  ACS-SFC-1000 FINISH PROCEDURE ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-1001 FINISH PROCEDURE ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-1003 FINISH PROCEDURE – SFC 1003 ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-1050 FINISH PROCEDURE SFC 1050 ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-1101 FINISH PROCEDURE SFC 1101 A NORTHROP GRUMMAN
  ACS-SFC-1102 Finish Procedure SFC 1102 B NORTHROP GRUMMAN
  ACS-SFC-1103 FINISH PROCEDURE SFC 1103 B NORTHROP GRUMMAN
  ACS-SFC-1200 FINISH PROCEDURE SFC-1200 A NORTHROP GRUMMAN
  ACS-SFC-1202 FINISH PROCEDURE SFC-1202 A NORTHROP GRUMMAN
  ACS-SFC-1203 FINISH PROCEDURE A NORTHROP GRUMMAN
  ACS-SFC-1204 STANDARD FINISH CODE 1024 ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-1300 FINISH PROCEDURE SFC 1300 A NORTHROP GRUMMAN
  ACS-SFC-2000 FINISH PROCEDURE – SFC 2000 ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-2001 STANDARD FINISH CODE SFC2001 A NORTHROP GRUMMAN
  ACS-SFC-2002 FINISH PROCEDURE – SFC 2002 ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-2003 Finish Procedure – SFC 2003 ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-4000 FINISH PROCEDURE SFC 4000 A NORTHROP GRUMMAN
  ACS-SFC-4001 FINISH PROCEDURE SFC 4001 A NORTHROP GRUMMAN
  ACS-SFC-4002 STANDARD FINISH CODE SFC4002 A NORTHROP GRUMMAN
  ACS-SFC-5000 FINISH PROCEDURE SFC 5000 B NORTHROP GRUMMAN
  ACS-SFC-5003 FINISH PROCEDURE B NORTHROP GRUMMAN
  ACS-SFC-6202 Finish Procedure SFC 6202 A NORTHROP GRUMMAN
  ACS-SFC-6204 FINISH PROCEDURE SFC 6204 A NORTHROP GRUMMAN
  ACS-SFC-6206 FINISH PROCEDURE SFC 6206 B NORTHROP GRUMMAN
  ACS-SFC-6207 Finish Procedure SFC 6207 A NORTHROP GRUMMAN
  ACS-SFC-6209 FINISH PROCEDURE – SFC 6209 C NORTHROP GRUMMAN
  ACS-SFC-7004 Finish Procedure – SFC 7004 ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-7005 SFC 7005 Finish Procedure ORIGINAL ISSUE NORTHROP GRUMMAN
  ACS-SFC-8000 Finish Procedure – SFC 8000 ORIGINAL ISSUE NORTHROP GRUMMAN
  AML4004 APPROVED MATERIALS LIST 23 NORTHROP GRUMMAN
  AML4006 APPROVED MATERIALS LIST 23 NORTHROP GRUMMAN
  AML4107 APPROVED MATERIALS LIST 16 NORTHROP GRUMMAN
  AML4308 APPROVED MATERIAL LIST 8 NORTHROP GRUMMAN
  AML4309 APPROVED MATERIALS LIST 8 NORTHROP GRUMMAN
  AML4311 APPROVED MATERIALS LIST 4 NORTHROP GRUMMAN
  AML4355 APPROVED MATERIALS LIST 14 NORTHROP GRUMMAN
  AML4358 APPROVED MATERIALS LIST 2 NORTHROP GRUMMAN
  AML4362 APPROVED MATERIALS LIST 6 NORTHROP GRUMMAN
  AML4364 PRODUCT: ADHESIVE, STRUCTURAL, 250 F – 350 F CURE NORTHROP GRUMMAN
  C-17 CLEANING PRIOR TO INSPECTION J NORTHROP GRUMMAN
  D102 IDENTIFICATION BY INK OR PAINT MARKING D NORTHROP GRUMMAN
  D103 IMPRESSION AND RAISED MARKING IDENTIFICATION A NORTHROP GRUMMAN
  D-107 MARKING TITANIUM ALLOYS E01 NORTHROP GRUMMAN
  DAA7322H024 FRACTURE CRITIAL PARTS PRESERVATION, PACKAGING F NORTHROP GRUMMAN
  DAA7326H001 FRACTURE & DURABILITY CRIT PARTS, PSVNT P/H & STOR OF: B NORTHROP GRUMMAN
  EAA1312-017 AFT DECK ACOUSTIC DATA FOR REDESIGN B APP J NORTHROP GRUMMAN
  EAA8412-001 ENGINEERING STANDARD – MANUFACTURED PARTS (AIR VEHICLE) J NORTHROP GRUMMAN
  EAA8412-003 ENGINEERING STANDARD – SURFACE MISMATCH D NORTHROP GRUMMAN
  F-143 GENERAL REQUIREMENTS FOR APPLYING COATINGS SEQ C01 NORTHROP GRUMMAN
  F-143 GENERAL REQUIREMENTS FOR APPLYING COATINGS SEQ C02 NORTHROP GRUMMAN
  F-143 GENERAL REQUIREMENTS FOR APPLYING COATINGS SEQ C03 NORTHROP GRUMMAN
  F-143 GENERAL REQUIREMENTS FOR APPLYING COATINGS SEQ C04 NORTHROP GRUMMAN
  F-143 GENERAL REQUIREMENTS FOR APPLYING COATINGS SEQ C05 NORTHROP GRUMMAN
  F-143 GENERAL REQUIREMENTS FOR APPLYING COATINGS C NORTHROP GRUMMAN
  F-143 GENERAL REQUIREMENTS FOR APPLYING COATINGS SEQ D01 NORTHROP GRUMMAN
  F-171 APPLYING WATER-REDUCIBLE, CORROSION-INHIBITIVE PRIMER D01 NORTHROP GRUMMAN
  F-185 APPLYING HIGH SOLIDS POLYURETHANE TOPCOAT SEQ D02 NORTHROP GRUMMAN
  F-185 APPLYING HIGH SOLIDS POLYURETHANE TOPCOAT SEQ D01 NORTHROP GRUMMAN
  F-185 APPLYING HIGH SOLIDS POLYURETHANE TOPCOAT D03 NORTHROP GRUMMAN
  FH-114 COLD EXPANSION OF HOLES IN ALUMINUM USING THE SPLIT MANDREL NORTHROP GRUMMAN
  FH-19 BEARINGS AND BUSHINGS H NORTHROP GRUMMAN
  FP-162 TOPCOAT, HIGH SOLIDS FOR POLYURETHANE MIL-C-85285, APPLICATI B NORTHROP GRUMMAN
  FP-28 CHEMICAL CONVERSION COATINGS, COLORED, FOR ALUMINUM AND ALUM J NORTHROP GRUMMAN
  FP-59 SULFURIC ACID ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLO C NORTHROP GRUMMAN
  FP-60 ANODIC COATINGS FOR MAGNESIUM ALLOYS D NORTHROP GRUMMAN
  FP-87 SULFURIC ACID ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS B NORTHROP GRUMMAN
  G120 SHIM ALUMINUM ALLOY, TAPERED IN THICKNESS P NORTHROP GRUMMAN
  G120 SHIM, ALUMINUM ALLOY, TAPERED IN THICKNESS AMENDMENT P1 NORTHROP GRUMMAN
  G423 BUSHING .188 ID CLAMP-UP G NORTHROP GRUMMAN
  GA100ABD ADHESIVE, EPOXY FILM TOUGHENED B NORTHROP GRUMMAN
  GA100AJ ADHESIVE, CEMENT, RUBBER AND GASKET, NON-STRUCTURAL, OIL RES E NORTHROP GRUMMAN
  GA100B ADHESIVE A NORTHROP GRUMMAN
  GA100BD ADHESIVE, EPOXY, PASTE GENERAL PURPOSE AA NORTHROP GRUMMAN
  GA100D ADHESIVE-SEALANT, SILICONE RUBBER, ONE-COMPONENT ROOM TEMPER P NORTHROP GRUMMAN
  GA100UL ADHESIVE, EPOXY, TWO PART, ROOM TEMPERATURE CURE, 350F SERVICE D NORTHROP GRUMMAN
  GB23J BRACKET, ZEE, CLAMP SUPPORT, WITH AND WITHOUT PLATE NUTS, ALUMINUM W NORTHROP GRUMMAN
  GB23K BRACKET, ANGLE, 90 DEGREE, CLAMP SUPPORT, WITH AND WITHOUT PLATE NUT WITH AND
  WITHOUT CORNER JOGGLE AD NORTHROP GRUMMAN
  GB23K BRACKET, ANGLE, 90 DEGREE, CLAMP SUPPORT, WITH AND WITHOUT PLATE NUT WITH AND
  WITHOUT CORNER JOGGLE AF NORTHROP GRUMMAN
  GC100B CORE, HONEYCOMB 5052 ALUMINUM ALLOY, MIL-C-7438, GRADE B U NORTHROP GRUMMAN
  GC100F CORE MATERIAL, HONEYCOMB, 5052 ALUMINUM ALLOY, PER AMS-C-74 W NORTHROP GRUMMAN
  GC100M CORE MATERIAL, HONEYCOMB, 5056 ALUMINUM ALLOY, PER AMS-C-743 H NORTHROP GRUMMAN
  GC101F CORE MATERIAL PLASTIC HONEYCOMB LAMINATED FABRIC BASE, 177C C NORTHROP GRUMMAN
  GC101H CORE, HONEYCOMB, NON-METALLIC, GLASS REINFORCED PHENOLIC RES F NORTHROP GRUMMAN
  GC101K CORE MATERIAL PLASTIC, HONEYCOMB, LAMINATED GLASS FABRIC BAS E NORTHROP GRUMMAN
  GC110AK CLOTH, COATED A NORTHROP GRUMMAN
  GC110DJ CLOTH, WIPERS, CLEANING E NORTHROP GRUMMAN
  GC110FD CLOTH, WIPING, FOR SOLVENT CLEANING APPLICATIONS C NORTHROP GRUMMAN
  GC110V CLOTH, WIRE, PLAIN WEAVE, PER RR-W-360 W NORTHROP GRUMMAN
  GC130AE COATING, WALKWAY COMPOUND, NON-SLIP, MIL-W-5044 M NORTHROP GRUMMAN
  GC130DL COATING, LACQUER, VINYL, FLAT, CLEAR D NORTHROP GRUMMAN
  GC130N COATING, POLYURETHANE, TWO-COMPONENT, FOR POLYCARBONATE SURF K NORTHROP GRUMMAN
  GC130R COATING, POLYURETHANE, FLUOROCARBON PIGMENTED, ABRASION RESI AA NORTHROP GRUMMAN
  GC130RJ COATING, POLYURETHANE, HIGH SOLIDS, PIGMENTED, ABRASION RESI H NORTHROP GRUMMAN
  GF105M FLUID, GEL, METAL SURFACE TREATMENT F NORTHROP GRUMMAN
  GF13D FLUSHNESS- FASTENER, COUNTERSUNK HEAD G NORTHROP GRUMMAN
  GG15A GAPS, HEAD FASTENERS E NORTHROP GRUMMAN
  GH11AL HOLE PREPARATION-FASTENER H NORTHROP GRUMMAN
  GH11BA HOLE PREPARATION, FASTENER SIZE AND ACCEPTANCE CRITERIA IN A C NORTHROP GRUMMAN
  GL105BH LUBRICANT, MOLD RELEASE AGENT, LIQUID T NORTHROP GRUMMAN
  GL503AB LOCK ASSEMBLY B NORTHROP GRUMMAN
  GL503AB LOCK ASSEMBLY B AMENDMENT 1 NORTHROP GRUMMAN
  GL510A LATCH ASSEMBLY FLUSH TRIGGER ACTION, 120-160 LBS. ULTIMATE S E NORTHROP GRUMMAN
  GL511C LATCH ASSEMBLY SPLASH PROOF, PUSH BUTTON B NORTHROP GRUMMAN
  GM4001 PREIMPREGNATED FIBERGLASS CLOTH (PREPREG) C AMENDMENT 1 NORTHROP GRUMMAN
  GM4004 SHIM MATERIAL, CAST PLASTIC, EPOXY RESIN D NORTHROP GRUMMAN
  GM4004 SHIM MATERIAL, CAST PLASTIC, EPOXY RESIN AMENDMENT 2 NORTHROP GRUMMAN
  GM4006B FASTENER INSERT AND EDGE SEALING MATERIALS FOR GENERAL PURPO NORTHROP GRUMMAN
  GM4018 FOAM, RIGID, FOAM-IN PLACE, POLYURETHANE TYPE B NORTHROP GRUMMAN
  GM4107D SEALING COMPOUND, FUEL RESISTANT, FILLET AND FAYING, -65F TO NORTHROP GRUMMAN
  GM4107D SEALING COMPOUND, FUEL RESISTANT, FILLET AND FAYING, -65°F TO 360°F SERVICE, TWO-PART AMENDMENT 1 NORTHROP GRUMMAN
  GM4308B FILM ADHESIVE, STRUCTURAL, METAL AND THERMOSET PLASTIC SUBST B NORTHROP GRUMMAN
  GM4309A ADHESIVE, CORE SPLICE, STRUCTURAL NORTHROP GRUMMAN
  GM4311A ADHESIVE, HIGH PEEL STRENGTH A NORTHROP GRUMMAN
  GM4355 ADHESIVE, STRUCTURAL HEAT-RESISTANT (350F) B NORTHROP GRUMMAN
  GM4355 ADHESIVE, STRUCTURAL HEAT-RESISTANT (350F) AMENDMENT 1 NORTHROP GRUMMAN
  GM4358 ADHESIVE, STRUCTURAL, MODERATE PEEL, -67F TO 300F SERVICE B NORTHROP GRUMMAN
  GM4362A ADHESIVE, STRUCTURAL 180 F SERVICE APPLICATIONS NORTHROP GRUMMAN
  GM4362A SPECIFICATION AMENDMENT ADHESIVE, STRUCTURAL, 180°F SERVICE APPLICATIONS A AMENDMENT 1 NORTHROP GRUMMAN
  GM4364 ADHESIVE, STRUCTURAL, 250F – 350F CURE NORTHROP GRUMMAN
  GN11A NAMEPLATE IDENTIFICATION AND MODIFICATION, ALUMINUM ALLOY U NORTHROP GRUMMAN
  GN11AC NAMEPLATES, PLACARDS, PANELS, DECALS AND LABELS, PROTECTIVE AG NORTHROP GRUMMAN
  GN11N NAMEPLATE IDENTIFICATION AND MODIFICATION, PLASTIC FILM, PRE G NORTHROP GRUMMAN
  GN512A NUT FLUSH, 100, SLOTTED, 250F B NORTHROP GRUMMAN
  GP100A PANEL, ALUMINUM SANDWICH, HONEYCOMB CORE N NORTHROP GRUMMAN
  GP100J PANEL, ALUMINUM SANDWICH, HONEYCOMB CORE T NORTHROP GRUMMAN
  GP100M PANEL, ALUMINUM SANDWICH, HONEYCOMB CORE K NORTHROP GRUMMAN
  GP105BG PLASTIC SHEET ABS, RIGID W NORTHROP GRUMMAN
  GP105K PLASTIC, SPONGE RUBBER, MODIFIED VINYL, CLOSED CELL, SHEET L NORTHROP GRUMMAN
  GP105S PLASTIC FILM ADHESIVE BACKED B NORTHROP GRUMMAN
  GP110AD PAINT, INK, MARKING ONE-PART, RUBBER-STAMP E NORTHROP GRUMMAN
  GP110ADW INK, MARKING, FOR INK JET PRINTERS C NORTHROP GRUMMAN
  GP110AEF PAINT, COATING, POLYURETHANE, HIGH SOLIDS, MIL-PRF-85285, CL AG NORTHROP GRUMMAN
  GP110H PAINT, LACQUER, ACRYLIC, MIL-L-81352 AE NORTHROP GRUMMAN
  GP110M INK, MARKING, ONE-PART K NORTHROP GRUMMAN
  GP111A PRIMER, ONE PART ADHESION PROMOTER FOR SILICON SEALANTS AND E NORTHROP GRUMMAN
  GP111AM PRIMER, CORROSION, INHIBIT, ADHESIVE BONDING APPLICATIONS F NORTHROP GRUMMAN
  GP111EL PRIMER, CORROSION,INHIBITING, ADHESIVE BONDING APPLICATIONS B NORTHROP GRUMMAN
  GP111V PRIMER EPOXY POLYAMIDE, FAST DRY, MIL-P-23377 P NORTHROP GRUMMAN
  GP13E PIN, HINGE (PIANO TYPE) RETENTION OF, MECHANICAL AND NON-MEC C NORTHROP GRUMMAN
  GP14A PAINT, MARKING, EPOXY, FLAT OR GLOSS AC NORTHROP GRUMMAN
  GP20A PROCESS AND FINISH CODES CL NORTHROP GRUMMAN
  GR100B RUBBER, SYNTHETIC, SHEET MIL-R-6855 N NORTHROP GRUMMAN
  GR110PF RESIN, SYNTACTIC COMPOUND, EPOXY, SELF-EXTINGUISHING E NORTHROP GRUMMAN
  GR110RV RESIN, EPOXY, FASTENER/INSERT POTTING AND EDGE SEALING J NORTHROP GRUMMAN
  GR501AT RIVET 100 FLUSH SHEAR HEAD, 7050 ALUMINUM G NORTHROP GRUMMAN
  GS12D SHIM, LAMINATED ALUMINUM ALLOY AND COROSION RESISTANT STEEL H NORTHROP GRUMMAN
  GS12E SHIM ALUMINUM ALLOY, TAPERED IN THICKNESS H NORTHROP GRUMMAN
  GS179AP SHAPE, CHANNEL, EXTRUDED, RUBBER E NORTHROP GRUMMAN
  GS179B SHAPE, BULB, EXTRUDED, RUBBER Y NORTHROP GRUMMAN
  GS179BB SHAPE, Y RUBBER, FABRIC COVERED D NORTHROP GRUMMAN
  GS179BC SHAPE Y FLAT RUBBER, FABRIC COVERED A NORTHROP GRUMMAN
  GS180A SHAPE, ANGLE, EXTRUDED, EQUAL LEG AND THICKNESS BG NORTHROP GRUMMAN
  GS180C SHAPE, ANGLE, EXTRUDED, UNEQUAL LEG AND EQUAL THICKNESS CK NORTHROP GRUMMAN
  GS182A SHAPE, CHANNEL, EXTRUDED CA NORTHROP GRUMMAN
  GS182B SHAPE, CHANNEL EXTRUDED, SPECIAL C NORTHROP GRUMMAN
  GS182BJ SHAPE, CHANNEL EXTRUDED, SPECIAL A NORTHROP GRUMMAN
  GS183A SHAPE, TEE EXTRUDED CG NORTHROP GRUMMAN
  GS30BF SUBSTITUTION LIST, MATERIALS, METALLIC AND NON-METALLIC AG NORTHROP GRUMMAN
  GS31AB SHOP PRACTICE MANDATORY/OPTIONAL AR NORTHROP GRUMMAN
  GS31AB SHOP PRACTICE MANDATORY/OPTIONAL AR AMENDMENT 2 NORTHROP GRUMMAN
  GS31AB SHOP PRACTICE MANDATORY / OPTIONAL AR AMENDMENT 3 NORTHROP GRUMMAN
  GS500D SPACER STRUCTURAL, PANEL FASTENER, RIVET j NORTHROP GRUMMAN
  GS500G SPACER STRUCTURAL, PANEL FASTENER, SELF-LOCKING R NORTHROP GRUMMAN
  GS501A SPACER, GROMMET TYPE, THRU-BOLT FASTENNER, ALUMINUM ALLOY PL T NORTHROP GRUMMAN
  GS503A SPACER, GROMMET TYPE THREADED, SELF-LOCKING FASTENNER, ALUMI K NORTHROP GRUMMAN
  GS503C SPACER, GROMMET TYPE NON-METALLIC LOCKING ELEMENT, ALUMINUM, E NORTHROP GRUMMAN
  GSS11100 GENERAL REQUIREMENTS FOR THE FABRICATION OF GLASS FIBER-BASE G NORTHROP GRUMMAN
  GSS11120 HONEYCOMB SANDWICH AND LOW PRESSURE LAMINATE STRUCTURES, FIB A NORTHROP GRUMMAN
  GSS11300 METALLIC AND NON-METALLIC HONEYCOMB CORE AND FACINGS FOR SAN D-3 NORTHROP GRUMMAN
  GSS11700 CAST PLASTIC SHIMS, REQUIREMENTS FOR FABRICATION OF E NORTHROP GRUMMAN
  GSS11802 FABRICATION OF MONOLITHIC HEAT RESISTANT PLASTIC PARTS B NORTHROP GRUMMAN
  GSS14100 SEALING; PRESSURIZED AREAS, SKIN JOINTS, FAYING SURFACES, AC D NORTHROP GRUMMAN
  GSS14105 APPLICATION OF HIGH-TEMP, FUEL RESISTANT SEALANTS F NORTHROP GRUMMAN
  GSS15301 INSTALLATION OF HIGH STRENGTH THREADED BLIND MECHANICAL FAST D NORTHROP GRUMMAN
  GSS15302 INSTALLATION OF SOLID AND TUBULAR RIVETS E NORTHROP GRUMMAN
  GSS15303 INSTALLATION OF BLIND RIVETS F NORTHROP GRUMMAN
  GSS15304 INSTALLATION OF HIGH STRENGTH, PULL TYPE, BLIND FASTENERS G NORTHROP GRUMMAN
  GSS15304 INSTALLATION OF HIGH STRENGTH,PULL TYPE, BLIND FASTENERS G NORTHROP GRUMMAN
  GSS15306 INSTALLATION OF HI-LOK TYPE FASTENERS C NORTHROP GRUMMAN
  GSS15308 INSTALLATION OF LOCKBOLTS F NORTHROP GRUMMAN
  GSS15309 INSTALLATION OF HI-SHEAR RIVETS A-0 NORTHROP GRUMMAN
  GSS15315 DIMPLING, FLUSH HEAD MACHANICAL FASTENER C NORTHROP GRUMMAN
  GSS15316 INSTALLATION OF HI-TIGUE TYPE INTERFERENCE FIT FASTENERS A NORTHROP GRUMMAN
  GSS15317 INSTALLATION OF HIGH STRENGTH, INTERNALLY THREADED BLIND,M M 0 NORTHROP GRUMMAN
  GSS15318 INSTALLATION OF ADJUSTABLE PRELOAD, SLEF-RETAINING, POSITIVE 0 NORTHROP GRUMMAN
  GSS15319 INSTALLATION OF INTERFERENCE FIT PULL TYPE, BLIND FASTENERS 0 NORTHROP GRUMMAN
  GSS20000 STRUCTURAL ADHESIVE BONDING (BASIC) D NORTHROP GRUMMAN
  GSS20100 STRUCTURAL ADHESIVE BONDING FM-47 ADHESIVE SYSTEM A NORTHROP GRUMMAN
  GSS20350 STRUCTURAL ADHESIVE BONDING FOR -67F TO 350F SERVICE TEMPERA C NORTHROP GRUMMAN
  GSS20360 STRUCTURAL ADHESIVE BONDING GM4358 ADHESIVE SYSTEM NORTHROP GRUMMAN
  GSS22650 ADHESIVE BONDING OF METALICS AND NON-METALLICS, GENERAL PURP c NORTHROP GRUMMAN
  GSS26100 CHEMICAL MILLING OF ALUMINUM ALLOYS G NORTHROP GRUMMAN
  GSS4310 COATING, PRIMER, EPOXY, APPLICATION OF K NORTHROP GRUMMAN
  GSS4406 APPLICATION OF CLEAR DULL VINYL LACQUER TO CONTROL DISPLAYS C NORTHROP GRUMMAN
  GSS4407 APLLICATION OF MIL-L-81352 (GP110H) ACRYLIC LACQUER G NORTHROP GRUMMAN
  GSS4510 COATING, POLYURETHANE, APPLICATION OF H NORTHROP GRUMMAN
  GSS4710 IDENTIFICATION OF FABRICATED METALLIC PARTS AND ASSEMBLIES F NORTHROP GRUMMAN
  GSS4710 IDENTIFICATION OF FABRICATED METALLIC PARTS AND ASSEMBLIES F AMENDMENT 2 NORTHROP GRUMMAN
  GSS4710 IDENTIFICATION OF FABRICATED METALLIC PARTS AND ASSEMBLIES F AMENDMENT 3 NORTHROP GRUMMAN
  GSS5300 FORMING AND STRAIGHTENING OF ALUMINUM ALLOYS F NORTHROP GRUMMAN
  GSS7012C PREPARATION OF SURFACES BY ABRASIVE METHODS 0 NORTHROP GRUMMAN
  GSS7022 PREPARATION OF SURFACES PRIOR TO STRUCTURAL ADHESIVE BONDING J NORTHROP GRUMMAN
  GSS7030 ALKALINE CLEANING OF FERROUS AND NON FERROUS ALLOYS G NORTHROP GRUMMAN
  GT100A TAPE GASKETING, ASBESTOS B NORTHROP GRUMMAN
  GT100AS TAPE, HOOK AND LOOP, FASTENER, NYLON, FLAME RETARDANT AC NORTHROP GRUMMAN
  GT100C TAPE, TEXTILE AND WEBBING, REINFORCING, NYLON, PER MIL-PRF-5 F NORTHROP GRUMMAN
  GT100CT TAPE MASKING STANDARD E NORTHROP GRUMMAN
  GT105D THREAD, NYLON, PER V-T-295 Y NORTHROP GRUMMAN
  GT16A REQUIREMENTS FOR THREAD ROLLING R NORTHROP GRUMMAN
  GT23A TEST, NON-DESTRUCTIVE, PENETRANT METHOD OF INSPECTION T NORTHROP GRUMMAN
  GT23G TEST, NON-DESTRUCTIVE, TAP BY MANUAL METHODS C NORTHROP GRUMMAN
  GW10U WASHER, FLAT, ALUMINUM ALLOY, CRES AND STEEL, SPECIAL AM1 NORTHROP GRUMMAN
  H-102 HEAT TREATMENT OF TITANIUM PARTS B NORTHROP GRUMMAN
  HT-1 HEAT TREATMENT OF ALUMINUM ALLOYS R0-01 NORTHROP GRUMMAN
  HT-19 HEAT TREATMENT OF PRECIPITATION HARDENING CORROSION RESISTAN C NORTHROP GRUMMAN
  HT-21 HEAT TREATMENT OF CARBON AND ALLOY STEELS TO 200,000 PSI D NORTHROP GRUMMAN
  IM-23 IDENTIFICATION BY INK OR PAINT MARKING C NORTHROP GRUMMAN
  IT-60 PENETRANT INSPECTION E NORTHROP GRUMMAN
  J-304 FUSION WELDING TITANIUM ALLOYS B NORTHROP GRUMMAN
  J-309 ELECTRON BEAM FUSION WELDING C NORTHROP GRUMMAN
  K-103 CLEANING TITANIUM BEFORE ADHESIVE BONDING OR FINISHING D NORTHROP GRUMMAN
  K-104 CLEANING TITANIUM BEFORE CHEMICAL SURFACE TREATMENT B NORTHROP GRUMMAN
  K-105 PHOSPHATE FLUORIDE SURFACE PREPARATION OF TITANIUM B NORTHROP GRUMMAN
  K-106 CLEANING TITANIUM PARTS BEFORE THERMAL PROCESSING B NORTHROP GRUMMAN
  K-106 CLEANING TITANIUM PARTS BEFORE THERMAL PROCESSING B ESP B NORTHROP GRUMMAN
  K-107 DESCALING TITANIUM B NORTHROP GRUMMAN
  K-107 DESCALING TITANIUM ESP B NORTHROP GRUMMAN
  K-108 CLEANING TITANIUM PARTS AFTER COLD FORMING SEQ B01 NORTHROP GRUMMAN
  K-108 CLEANING TITANIUM PARTS AFTER COLD FORMING B NORTHROP GRUMMAN
  K-109 CLEANING TITANIUM BEFORE WELDING B NORTHROP GRUMMAN
  K-129 ALKALINE DEGREASING D NORTHROP GRUMMAN
  K-130 ABRASIVE CLEANING D02 NORTHROP GRUMMAN
  K-130 EQUIVALENT SUPPLIER PROCESS – ABRASIVE CLEANING 9 OCT 2013 NORTHROP GRUMMAN
  K-130C ABRASIVE CLEANING C NORTHROP GRUMMAN
  K-132 CLEANING AFTER INSPECTION C01 NORTHROP GRUMMAN
  K-132 CLEANING AFTER INSPECTION ESP A NORTHROP GRUMMAN
  K-135 STRIPPING ORGANIC COATINGS SEQ G01 NORTHROP GRUMMAN
  K-135 STRIPPING ORGANIC COATINGS SEQ G02 NORTHROP GRUMMAN
  K-135 STRIPPING ORGANIC COATINGS H NORTHROP GRUMMAN
  K-138 CLEANING BEFORE INSPECTION B NORTHROP GRUMMAN
  K-138 CLEANING BEFORE INSPECTION SEQ C01 NORTHROP GRUMMAN
  K-138 CLEANING BEFORE INSPECTION SEQ C02 NORTHROP GRUMMAN
  K-138 CLEANING BEFORE INSPECTION ESP B NORTHROP GRUMMAN
  K-142 SOLVENT CLEANING C01 NORTHROP GRUMMAN
  K-142 SOLVENT CLEANING SEQ B02 NORTHROP GRUMMAN
  K-142 SOLVENT CLEANING SEQ B03 NORTHROP GRUMMAN
  K-142 SOLVENT CLEANING ESP B NORTHROP GRUMMAN
  MA-106 SHOT PEENING OF ALUMINUM PARTS B NORTHROP GRUMMAN
  MA-116 MACHINING OF HIGH STRENGTH STEELS D NORTHROP GRUMMAN
  MA-82 STRAIGHTENING OF ALUMINUM AND MAGNESIUM CASTING C NORTHROP GRUMMAN
  MA-84 STRAIGHTENING OF WROUGHT ALUMINUM ALLOYS E NORTHROP GRUMMAN
  MCS5900 CONSUMABLE MATERIAL SPECIFICATION FOR COMPOSITE FABRICATION Y NORTHROP GRUMMAN
  MIL-DTL-5541 CHEMICAL CONVERSION COATINGSON ALUMINUM AND ALUMINUM ALLOY F NORTHROP GRUMMAN
  MMS1420 APPROVED MMS 1420 MATERIAL SOURCES N ADDENDUM 1 NORTHROP GRUMMAN
  MMS307 APPROVED MMS 307 MATERIAL SOURCES C ADDENDUM 1 NORTHROP GRUMMAN
  MMS348 LIQUID, EPOXY NORTHROP GRUMMAN
  MMS350 STRUCTURAL ADHESIVE SYSTEM, INTERMEDIATE MODULUS, FOR 2504 S K NORTHROP GRUMMAN
  MMS358 APPROVED MMS358 MATERIAL SOURCES G ADDENDUM 1 NORTHROP GRUMMAN
  MP-292 PROCESSING OF ALUMINUM FORGINGS IN THE T6XX CONDITION F NORTHROP GRUMMAN
  MS-107 POWER FEEDER AND BATTERY WIRES A NORTHROP GRUMMAN
  MS-342 TITANIUM 6AI-4V, ELI, RA FORGINGS F NORTHROP GRUMMAN
  MS-344 TITANIUM, TI-6A1-4V SHAPES D NORTHROP GRUMMAN
  MS-424 PRIMER COATING, EPOXY, VOC COMPLIANT C NORTHROP GRUMMAN
  MS-424 PRIMER COATING, EPOXY, VOC COMPLIANT SEQ C01 NORTHROP GRUMMAN
  MS-424 PRIMER COATING, EPOXY, VOC COMPLIANT SEQ C02 NORTHROP GRUMMAN
  MS-424 PRIMER COATING, EPOXY, VOC COMPLIANT SEQ C03 NORTHROP GRUMMAN
  MS-424 PRIMER COATING, EPOXY, VOC COMPLIANT SEQ C04 NORTHROP GRUMMAN
  MS-424 PRIMER COATING, EPOXY, VOC COMPLIANT SEQ C05 NORTHROP GRUMMAN
  MS-519 IMPACT RESISTANT EPOXY/WOVEN S-GLASS F NORTHROP GRUMMAN
  MS-519 IMPACT RESISTANT EPOXY/WOVEN S-GLASS SEQ F01 NORTHROP GRUMMAN
  MS-519 IMPACT RESISTANT EPOXY/WOVEN S-GLASS SEQ F02 NORTHROP GRUMMAN
  NGB528DJ BUSHING, CLAMP-UP B NORTHROP GRUMMAN
  NGB540DN BUSHING, FLANGED, PRESS FIT, REAM TYPE, CRES NC1 NORTHROP GRUMMAN
  NGB540DP BUSHING, FLANGED, PRESS FIT, SPECIAL NC NORTHROP GRUMMAN
  NGB550DK BRACKET, ALUMINUM, WITH AND WITHOUT NUT PLATE E NORTHROP GRUMMAN
  NGB550EL BRACKET, 90°, “L”‘, SHAPE, ALUMINUM D NORTHROP GRUMMAN
  NGB550EM BRACKET, 90°, “Z” – SHAPE C NORTHROP GRUMMAN
  NGB550ET BRACKET, COMPOSITE, Z-SECTION, WITH OPTIONAL HOLE, SLOT OR NUTPLATE B1 NORTHROP GRUMMAN
  NGB550EU BRACKET, COMPOSITE, L-SECTION, WITH OPTIONAL HOLE, SLOT OR NUTPLATE D2* NORTHROP GRUMMAN
  NGB550EV BRACKET, COMPOSITE, L-SECTION, LONG, WITH OPTIONAL HOLE, SLOT OR NUTPLATE C1 NORTHROP GRUMMAN
  NGB550EW BRACKET, COMPOSITE, Z-SECTION, LONG, WITH OPTIONAL HOLE, SLOT OR NUTPLATE C1 NORTHROP GRUMMAN
  NGB550EY BRACKET, COMPOSITE, HAT-SECTION, TWO HOLES, TWO NUTPLATES, CLAMP OR CLAMP BLOCK
  MOUNTING E1 NORTHROP GRUMMAN
  NGB550FA BRACKET, COMPOSITE, L-SECTION, TWO HOLES, TWO NUTPLATES, CLAMP OR CLAMP BLOCK
  MOUNTING G2 NORTHROP GRUMMAN
  NGB550FB BRACKET, COMPOSITE, Z-SECTION, TWO HOLES, TWO NUTPLATES, CLAMP OR CLAMP BLOCK
  MOUNTING G1 NORTHROP GRUMMAN
  NGB550FC BRACKET, COMPOSITE, HAT-SECTION, THREE HOLES, THREE NUTPLATES, CLAMP OR CLAMP
  BLOCK MOUNTING B1 NORTHROP GRUMMAN
  NGB550FD BRACKET, COMPOSITE, L-SECTION, THREE HOLES, THREE NUTPLATES, CLAMP OR CLAMP BLOCK
  MOUNTING C1 NORTHROP GRUMMAN
  NGB550FE BRACKET, COMPOSITE, Z-SECTION, THREE HOLES, THREE NUTPLATES, CLAMP OR CLAMP-BLOCK
  MOUNTING A1 NORTHROP GRUMMAN
  NGB550FF BRACKET, COMPOSITE, HAT-SECTION, ONE NUTPLATE, FOUR MOUNTING HOLES, CLAMP OR
  CLAMP BLOCK MOUNTING A2 NORTHROP GRUMMAN
  NGB550FG BRACKET, 90°, “L” SHAPE, TITANIUM A NORTHROP GRUMMAN
  NGB550FH BRACKET, 90 DEGREE, “Z” – SHAPE, TITANIUM A1 NORTHROP GRUMMAN
  NGB850BE BRACKET, MOUNTING, COMPOSITE F NORTHROP GRUMMAN
  NGB850BF BRACKET, MOUNTING, CONNECTOR, ANGLE, 90 DEGREES, ALUMINUM AND TITANIUM NC NORTHROP GRUMMAN
  NGC851CP COUPLER, DATA BUS, MIL-STD-1553 COMPLIANT NC NORTHROP GRUMMAN
  NGF510AH
  FASTENER – BLIND, INTERNAL THREAD, PROTRUDING HEAD, BULB SLEEVE, TI/CRES/ACETAL
  NC NORTHROP GRUMMAN
  NGF510AH FASTENER – BLIND, INTERNAL THREAD, PROTRUDING HEAD, BULB SLEEVE, 75 KSI FSU, TI/CRES A NORTHROP GRUMMAN
  NGH11BN CUTOUTS AND MOUNTING PATTERNS, GENERAL SPECIFICATION FOR J NORTHROP GRUMMAN
  NGJ803J JUMPER ASSEMBLY, AS20659 AND NGT805HE TYPE TERMINAL LUG (BOTH ENDS), AS22759/187
  WIRE
  A4 NORTHROP GRUMMAN
  NGL20AD PIN, INDEX, LINE REPLACEABLE UNIT (LRU) B NORTHROP GRUMMAN
  NGM13E MARKING, PROCEDURE, FOR FUNCTION AND REFERENCE DESIGNATIONS A NORTHROP GRUMMAN
  NGN500BA NUT, STAND-OFF, HORIZONTAL, TWO LUG D NORTHROP GRUMMAN
  NGN502DD NUTPLATE, SELF LOCKING, CORNER, FLOATING, 450 °F, REPLACEABLE NUT ELEMENT B NORTHROP GRUMMAN
  NGN502DR NUTPLATE, TWO LUG, FLOATING, ADHESIVE BONDED NC NORTHROP GRUMMAN
  NGN502DY
  NUTPLATE, TWO LUG, DOMED, SELF-LOCKING, FLOATING, SELF-SEALING, HIGH REUSE A286 CRES
  NC NORTHROP GRUMMAN
  NGN502EC NUTPLATE, 2-LUG, RIVETED, SELF-LOCKING, HIGH REUSE, HIGH FLOAT (0.070 RADIAL FLOAT), A286
  CRES, SILVER PLATE C NORTHROP GRUMMAN
  NGN510BK NUT, HEX WITH FLANGE, SELF-LOCKING, 160 KSI A NORTHROP GRUMMAN
  NGN512NN NUT, CLIP, CRES C NORTHROP GRUMMAN
  NGP111HK PRIMER, ADHESION PROMOTER, FOR USE WITH POLYSULFIDE AND/OR P C NORTHROP GRUMMAN
  NGP830AY PLATE, MOUNTING, CONNECTOR, DOUBLER G NORTHROP GRUMMAN
  NGR540EU RETAINING RING, PANEL FASTENER NC NORTHROP GRUMMAN
  NGR699A TECHNICAL DATA REQUIREMENTS FOR PART QUALIFICATION NC NORTHROP GRUMMAN
  NGS195A SHAPE, COMPOSITE, L-SECTION B NORTHROP GRUMMAN
  NGS195B SHAPE, COMPOSITE, U-SECTION A NORTHROP GRUMMAN
  NGS195C SHAPE, COMPOSITE, HAT-SECTION C NORTHROP GRUMMAN
  NGS195D SHAPE, COMPOSITE, T-SECTION C NORTHROP GRUMMAN
  NGS195F SHAPE, COMPOSITE Z-SECTION D NORTHROP GRUMMAN
  NGS195G SHAPE, COMPOSITE, I-SECTION A NORTHROP GRUMMAN
  NGSS4712 REQUIREMENTS FOR UNIQUE IDENTIFICATION (UID) MARKING, OF FAB A NORTHROP GRUMMAN
  NGT11P TERMINAL INSTALLATION, ELECTRICAL, GROUNDING AND BONDING B NORTHROP GRUMMAN
  NGT802BP TERMINAL BOARD ASSEMBLY B NORTHROP GRUMMAN
  NGT817EE TERMINATOR, DATA BUS, TTM THREADED PLUG WITH SAFETY WIRE HOLES NC1 NORTHROP GRUMMAN
  NOR-QPL-1365 CUTTING FLUIDS, WATER EXTENDIBLE NORTHROP GRUMMAN
  P-200 PACKAGING IN ONE CARTON OR CORRUGATED BOX E NORTHROP GRUMMAN
  P-6975 F5E, F-5F, F-5G, & T38 FATIGUE CRITICAL PARTS (FCP) – PRESER B NORTHROP GRUMMAN
  PHST1002 PACKAGING ENGINEERING MATERIAL HANDLING MANUAL H NORTHROP GRUMMAN
  PHST1004 CRITICAL PARTS AND ASSEMBLIES – PRESERVATION, PACKAGING, HAN N NORTHROP GRUMMAN
  PHST1011 TITANIUM AND TITANIUM ALLOYS, RAW MATERIAL AND CONFIGURED PA B NORTHROP GRUMMAN
  PS11217 SEALING METHODS, AIRCRAFT NORTHROP GRUMMAN
  PS11242 TOLERANCE REQUIREMENTS FOR BOND DETAILS D NORTHROP GRUMMAN
  PS11308 BONDING WITH EPOXY ADHESIVES NORTHROP GRUMMAN
  PS11344 SEALING METHODS AF CN: H02238 NORTHROP GRUMMAN
  PS11345 SEALING AND LEAK TESTING OF ADHESIVE BONDED HONEYCOMB CORE S R NORTHROP GRUMMAN
  PS12010 CLEANING, SOLVENT, HAND OR IMMERSION U NORTHROP GRUMMAN
  PS12020 CLEANING, SLOVENT VAPOR DEGREASING AA NORTHROP GRUMMAN
  PS12024 CLEANING, AQUEOUS IMMERSION DEGREASING J CN: H02151 NORTHROP GRUMMAN
  PS12035 CLEANING OF ALUMINUM DETAIL PARTS FOR ADHESIVE Y NORTHROP GRUMMAN
  PS12040 CLEANING, ABRASIVE AD NORTHROP GRUMMAN
  PS12050 PICKLING U NORTHROP GRUMMAN
  PS12050.6 PICKLING TITANIUM AND TITANIUM ALLOYS L NORTHROP GRUMMAN
  PS13001 PAASSIVATION OF CORROSION AND HEAT RESISTING ALLOYS T NORTHROP GRUMMAN
  PS13101 PLATING, CADMIUM ELECTRO V NORTHROP GRUMMAN
  PS13201 ANODIZING , ALUMINUM ALLOYS AL NORTHROP GRUMMAN
  PS13204 CONVERSION COATING, BRUSH AND SPRAY AL NORTHROP GRUMMAN
  PS13209 COATING, MULTCOLORED CHEMICAL CONVERSION OF W NORTHROP GRUMMAN
  PS13318 PAINTING OF AEROSPACE GROUND EQUIPMENT (AGE) P NORTHROP GRUMMAN
  PS13375 APPLICATION OF EPOXY PRIMER AD NORTHROP GRUMMAN
  PS13525 POLYURETHANE CORROSION RESISTANT COATING, SPRAY APPLICATION AD NORTHROP GRUMMAN
  PS13630 PAINTING OF F/A- 18 AND AV-8 AIRCRAFT AE NORTHROP GRUMMAN
  PS13630.1 PAINTING AT DETAIL AND ASSEMBLY LEVEL AG NORTHROP GRUMMAN
  PS13630.3 REWORK OF PAINTED SURFACES J NORTHROP GRUMMAN
  PS14007 FORMING ALUMINUM ALLOY WROUGHT PRODUCTS AB NORTHROP GRUMMAN
  PS14030 HONEYCOMB SANDWICH ASSEMBLIES, ALUMINUM, EDGINE, FABRICATION H NORTHROP GRUMMAN
  PS14032 PREPARATION AND APPLICATION OF PLASTIC FILLER PLASTIC SHIM C U NORTHROP GRUMMAN
  PS14034 LAMINATES, REINFORCED PLASTIC, FABRICATION OF AD NORTHROP GRUMMAN
  PS14111 MACHINING AND DRILLING COMPOSITES FOR IN-HOUSE AND NORTHROP GRUMMAN SUPPLIERS
  ONLY
  CANCEL NORTHROP GRUMMAN
  PS14111.3 MACHINING AND DRILLING COMPOSITES AT NORTHROP GRUMMAN AND NORTHROP GRUMMAN ORIGINAL NORTHROP GRUMMAN
  PS14123 SAND MATERIAL, HONEY CORE, FIBER GLASS OR KEVLAR 49/EPOXY SK G NORTHROP GRUMMAN
  PS14124 SANDWICH MATERIAL. HONEYCOMB CORE, CARBON SKIN FABRICATION O N NORTHROP GRUMMAN
  PS14148 FABRICATION AND APPLICATION OF F/A-18 E/F BLADE SEALS AND TRAILING EDGES U NORTHROP GRUMMAN
  PS14223 FABRICATION, PROCUREMENT AND ACCEPTANCE OF CORROSION RESISTA V DEVIATION 3 NORTHROP GRUMMAN
  PS14268 CARBON FIBER REINFORCED TOUGHENED EPOXY (NET RESIN) LAMINATE AA NORTHROP GRUMMAN
  PS14290 COMPOSITE AND BONDING CURE CYCLE PROCEDURES T NORTHROP GRUMMAN
  PS15000.11 HARDENING PH GRADE STAINLESS STEEL TO THE H CONDITION C NORTHROP GRUMMAN
  PS15500.4 HEAT TREATING OF ALUMINUM ALLOYS TO THE -T6/-T62 AND T72 CON A NORTHROP GRUMMAN
  PS16001 MARKING OF FABRICATED PARTS CC NORTHROP GRUMMAN
  PS17034 BUSHINGS, INSTALLATION OF L NORTHROP GRUMMAN
  PS19000 INSTALLATION OF FASTENERS Y NORTHROP GRUMMAN
  PS19110 FASTENERS, SOLID RIVETS; INSTALLATION OF W NORTHROP GRUMMAN
  PS19135 FASTENERS, JO-BOLT TYPE BLIND BOLTS, INSTALLAT Y NORTHROP GRUMMAN
  PS19145 INSTALLATION OF HI-LOK FASTENERS AE NORTHROP GRUMMAN
  PS19200 FASTENERS, BOLTS, AND SCREW: INSTALLATION AR NORTHROP GRUMMAN
  PS19402 HOLE PREPARATION-FEEDS AND SPEEDS AN NORTHROP GRUMMAN
  PS20001 PROTECTION OF PARTS DURING FABRICATION AND TE AA NORTHROP GRUMMAN
  PS20006 SHEET METAL AND EXTRUSIONS, REQUIREMENTS AND ACCEPTANCE CRI R NORTHROP GRUMMAN
  PS20009 METALLIC MATERIALS, AND PARTS, STRAIGHTENING O J NORTHROP GRUMMAN
  PS20018 SURFACE FINISH REQUIREMENTS FOR ROUND HOLES F NORTHROP GRUMMAN
  PS20509 AREA REQ FOR ADHESIVE BONDING/COMPOST FAB U NORTHROP GRUMMAN
  PS21202 PENETRANT INSPECTION AT NORTHROP GRUMMAN
  PS21206.1 RADIOGRAPHIC INSP OF METALLIC HOENYCOMB ASSY D NORTHROP GRUMMAN
  PS21211.5 ULTRASONIC INSP OF METALLIC, BONDED, OR BRAZ C NORTHROP GRUMMAN
  PS21219 EDDY CURRENT INSPECTION, GENERAL B NORTHROP GRUMMAN
  PS21233 NONDESTRUCTIVE TESTING OF HONEYCOMB ASSEMBLIES AND COMPOSITE K NORTHROP GRUMMAN
  PS21244 ULTRASONIC RESONANCE INSPECTION OF BONDED ASSY E NORTHROP GRUMMAN
  PS21252 VISUAL INSPECTION OF CARBON EPOXY COMPOSITE G NORTHROP GRUMMAN
  PS21313 COATING ADHESION TESTS M NORTHROP GRUMMAN
  PS23023 HARDNESS AND ELECTRICAL CONDUCTIVITY INSPECTION ACCEPTANCE CRITERIA FOR METALS W NORTHROP GRUMMAN
  QC-26 QUALITY ACCEPTANCE CRITERIA FOR FORMED METAL PARTS C NORTHROP GRUMMAN
  QC-34 ENGINEERING ACCEPTANCE CRITERIA FOR MANUFACTURED PARTS, GENE A NORTHROP GRUMMAN
  QSM-00001 CLEANING SOLVENT D NORTHROP GRUMMAN
  QSM-00002 WIPER MATERIAL D NORTHROP GRUMMAN
  QSM-00004 ABRASIVE PADS AND DISCS B NORTHROP GRUMMAN
  QSM-00034 SILICON CARBIDE ABRASIVE SHEET C NORTHROP GRUMMAN
  QSM-00052 ISOPROPYL ALCOHOL B NORTHROP GRUMMAN
  QSM-00055 DEIONIZED WATER A NORTHROP GRUMMAN
  QSM-00060 CHEMICALLY NEUTRAL WRAPPING PAPER A NORTHROP GRUMMAN
  QSM-00077 FLATBACK MASKING TAPE E NORTHROP GRUMMAN
  QSM-00109 MASKING TAPE H NORTHROP GRUMMAN
  QSM-00490 LONG-MASK MASKING TAPE B NORTHROP GRUMMAN
  QSM-00609 HOT FORMING LUBRICANT – INACTIVE NOT IN USE A NORTHROP GRUMMAN
  R-103 CHEMICAL MILLING OF TITANIUM C01 NORTHROP GRUMMAN
  R-103 CHEMICAL MILLING OF TITANIUM EO C01 NORTHROP GRUMMAN
  R-109 APPLYING HEAT TREAT PROTECTIVE COATINGS B NORTHROP GRUMMAN
  R-304 STRAIGHTENING TITANIUM FORGINGS AND EXTRUSIONS B NORTHROP GRUMMAN
  R-306 FABRICATING AND FORMING TITANIUM PARTS E NORTHROP GRUMMAN
  R-316 THERMAL CUTTING OF TITANIUM ORG NORTHROP GRUMMAN
  R-329 SUPERPLASTIC FORMING OF TITANIUM C NORTHROP GRUMMAN
  R-336 MATERIALS AND PROCESSES ENGINEERING PROCESS SPECIFICATION ROTO PEENING A NORTHROP GRUMMAN
  RAA3700E006 PROTECTIVE FINISH RQMTS FOR AIRCRAFT D NORTHROP GRUMMAN
  RAA3700E006 PROTECT FINISH REQMTS FOR AIRCRAFT D NORTHROP GRUMMAN
  SC-108 CONTROL OF MACHINING AND FORMING FLUIDS A NORTHROP GRUMMAN
  SC-109 REQUIREMENTS, SPRAY PAINTING FACILITIES AND AREAS D NORTHROP GRUMMAN
  SC-109 REQUIREMENTS, SPRAY PAINTING FACILITIES AND AREAS ADCN D04 NORTHROP GRUMMAN
  SC-109 REQUIREMENTS, SPRAY PAINTING FACILITIES AND AREAS ADCN D05 NORTHROP GRUMMAN
  SC-110 REQUIREMENTS FOR SPRAY PAINTING EQUIPMENT B NORTHROP GRUMMAN
  SC-206 NONAERODYAMIC SURFACE SMOOTHNESS (UNCLASSIFIED MANUFACTURING E NORTHROP GRUMMAN
  SC-210 AERODYNAMIC SMOOTHNESS REQUIREMENTS A NORTHROP GRUMMAN
  SC-301 THERMAL EQUIPMENT CONTROL A NORTHROP GRUMMAN
  SC-301 THERMAL EQUIPMENT CONTROL B01 NORTHROP GRUMMAN
  SC-302 QUALITY ASSURANCE CRIT FOR FORMED METAL PARTS B NORTHROP GRUMMAN
  SC-304 FORGING GRAIN FLOW B NORTHROP GRUMMAN
  SC-305 GRAIN DIRECTION CONTROL C NORTHROP GRUMMAN
  SC-306 MACHINED PARTS- SPECIAL CONTROLS B NORTHROP GRUMMAN
  SC-308 CONTROL OF FCT AND DURBILITY CRITICAL PARTS B NORTHROP GRUMMAN
  SC-309 TRACEABILITY AND SERIALIZATION CONTROL A NORTHROP GRUMMAN
  SC-311 FORGING QUALIFICATION, SPECIAL REQIREMENTS B NORTHROP GRUMMAN
  SC-313 PRODUCT QUALIFICATION FOR METALLIC MATERIALS A NORTHROP GRUMMAN
  SC-320 CONTROL OF TITANIUM CONTAMINATION B NORTHROP GRUMMAN
  SDRLDAF3121P041 ADF3 SUBCONTRACTS DATA REQUIREMENTS LI A NORTHROP GRUMMAN
  SQAR SUPPLIER QUALITY ASSURANCE REQUIREMENTS 12/20/2017 NORTHROP GRUMMAN
  SUPPLIER TOOLING MANUAL SUPPLIER TOOLING MANUAL K** NORTHROP GRUMMAN
  T-103 PENETRANT INSPECTION E NORTHROP GRUMMAN
  T-103 PENETRANT INSPECTION E01 NORTHROP GRUMMAN
  T-103 PENETRANT INSPECTION E02 NORTHROP GRUMMAN
  T-103 PENETRANT INSPECTION ESP NORTHROP GRUMMAN
  T-103 PENETRANT INSPECTION ADCN F01 NORTHROP GRUMMAN
  T-106 RADIOGRAPHIC INSPECTION- GENERAL B0 NORTHROP GRUMMAN
  T-106 RADIOGRAPHIC INSPECTION – GENERAL B NORTHROP GRUMMAN
  T-117 NONDESTRUCTIVE TESTING OF CASTINGS A NORTHROP GRUMMAN
  T-117 NONDESTRUCTIVE TESTING OF CASTINGS B01 NORTHROP GRUMMAN
  T-119 TENSION TESTING OF WROUGHT METALLIC MATERIALS B NORTHROP GRUMMAN
  T-132 EDDY CURRENT INSPECTION – GENERAL ESP NORTHROP GRUMMAN
  T-132 EDDY CURRENT INSPECTION – GENERAL B02 NORTHROP GRUMMAN
  T-181 MEASMENT OF ALPHA CASE ON TITANIUM ALLOYS C01 NORTHROP GRUMMAN
  T-181 MEASMENT OF ALPHA CASE ON TITANIUM ALLOYS ESP NORTHROP GRUMMAN
  TAF3121-001 MATERIAL TESTING RQMTS FOR TI-6A1-2SN-4ZR-2MO NORTHROP GRUMMAN
  2379RMS CONFIGURATION CERTIFICATION Dec-18 RAYTHEON
  HR NONCONFORMING MATERIAL CONTROL 7 RAYTHEON
  NC REQUEST FOR DEVIATIONS AND WAIVERS PROCESS 6 RAYTHEON
  P1111A COMMERCIAL PACKAGING (RAYTHEON) 14 RAYTHEON
  06000-700-003 FINISH SPECIFICATION FOR THE CH-53K HELICOPTER 1 SIKORSKY
  06000-777-001 MANUFACTURING INSPECTION AND ACCEPTANCE CRITERIA FOR CH53K 7 SIKORSKY
  06000-777-003 GENERAL MATERIALS, PROCESSES, AND PARTS SPECIFICATION FOR THE MODEL CH-53K
  HELICOPTER
  2 SIKORSKY
  2000-729-003 INSPECTION AND ACCEPTANCE CRITERIA SPECIFICATION FOR RAH-66 R0-01 SIKORSKY
  2000-777-009A COMPOSITE COMPONENTS, GENERAL PROCESS SPECIFICATION A SIKORSKY
  2000-777-009D FILAMENT WINDING OF COMPOSITE COMPONENTS 00 SIKORSKY
  2000-777-023 350° F (177° C) CURING EPOXY IMPREGNATED UNIDIRECTIONAL GRAPH 3 SIKORSKY
  2000-777-025 350° F (177° C) CURING EPOXY IMPREGNATED WOVEN GRAPHITE FABRI 1 SIKORSKY
  2000-777-307 HIGH STRENGTH POLYAMIDE REINFORCED HONEYCOMB CORE 00 SIKORSKY
  B 594-06 ULTRASONIC INSPECTION OF ALUMINUM-ALLOY WROUGHT PRODUCTS FOR SIKORSKY
  CH53K-SDRL-HLR41 Manufacturing Inspection and Acceptance Criteria for CH53K Aft Transition, Ramp, and Overhead Door
  Composite Airframe Parts
  3 SIKORSKY
  DDM03.02.00 DESIGN/DRAFTING MANUAL – Drawing and Part Numbering System *17 SIKORSKY
  DDM10.20.00 DESIGN/DRAFTING MANUAL – CATIA V5 Modeling in an LCA Environment 7 SIKORSKY
  DDM23.11.00 DESIGN/DRAFTING MANUAL – Engineering Order (EO) and Various Types *13 SIKORSKY
  DESKTOP FLIGHT DESKTOP FLIGHT SAFETY E SIKORSKY
  SA5468 NOTICE OF INTENDED MANUFACTURING PROCESS FSP 1 SIKORSKY
  SA908 STANDARD TERMS AND CONDITIONS OF PURCHASE November 1, 2017 SIKORSKY
  SS1027 JOGGLING OF ALUMINUM ALLOY SHEET STOCK 7 SIKORSKY
  SS1033 DOUBLE BEADS STANDARD ROLLED 1 SIKORSKY
  SS1038 60 FLANGED HOLES 4 SIKORSKY
  SS1040 FLANGED-HOLE-DATA 6 SIKORSKY
  SS1058 RADIUS BLOCK 10 SIKORSKY
  SS1090 BRACKET ANGLE, MOUNTING 12 SIKORSKY
  SS2314 SHIM STOCK, COMPOSITE 3 SIKORSKY
  SS27253 PLATE, ID, WITH UNIQUE ID 3 SIKORSKY
  SS27576 BOLT, SELF RETAINING IMPEDANCE TYPE, 95 KSI Fsu HEX HEAD, 450 DEGREE F (FOR USE IN
  CRITICAL APPLICATIONS)
  7 SIKORSKY
  SS3000 STANDARD SHAPES FOR RIGID FOAM MANDREL 4 SIKORSKY
  SS3995 SHIPPING AND PROTECTIVE CLOSURES (Caps, Plugs, Bags) 7 SIKORSKY
  SS4007 BUSHING CLOSE TOLERANCE SLIDE FIT 4 SIKORSKY
  SS4009 BUSHING, SHOULDER — THICK WALL CLOSE TOLERANCE — PRESS FIT 6 SIKORSKY
  SS4011 PRESS FIT PARTS- ASSEMBLY OF INTERFERENCE FITS 5 SIKORSKY
  SS4030 SERRATIONS FLAT 6 SIKORSKY
  SS4039 PIN, STRAIGHT, HEADLESS – (DOWEL) 2 SIKORSKY
  SS4070 NYLON TUBING FOR AIRCRAFT USE 2 SIKORSKY
  SS4073 SHRINK – FIT CONNECTION OF NYLON TUBING 1 SIKORSKY
  SS4200/100 TUBE END CUT-OFF, FORMING, CLEANING, TRIMMING AND MARKING 02 SIKORSKY
  SS4200/170 PERMASWAGE TUBE FITTINGS, INSTALLATION OF SIKORSKY
  SS4200/200 Flushing Procedure, Aircraft Hose and Tubing, Procedure for 1 AMENDMENT 1-01 SIKORSKY
  SS430 DOUBLER – WASHER PREDRILLED – UNDRILLED 13 SIKORSKY
  SS4409 WASHER, METALLIC SPECIAL 49 SIKORSKY
  SS460 HOSE ASSEMBLY, LOW PRESSURE 2 SIKORSKY
  SS5050 INSTALLATION OF DZUS FASTENERS 3 SIKORSKY
  SS5059 ROSAN SLIMSERT INSERTS NEW SIKORSKY
  SS5061 INSTALLATION AND REMOVAL OF JO-BOLTS 3 SIKORSKY
  SS5062 FASTENER HI-LOK PROTRUDING TENSION HEAD, INSTALLATION OF 1 SIKORSKY
  SS5086 NUT-SELF LOCKING, 18 SIKORSKY
  SS5088 NUT, SELF-LOCKING, 6 SIKORSKY
  SS5089 NUT-SELF LOCKING 9 SIKORSKY
  SS5091 NUT-ANCHOR, TWO LUG SELF-LOCKING DEEP COUNTERBORED FLOATING, MINIATURE, 450°F 7 SIKORSKY
  SS5093 NUT, SELF-LKG & NON-LGK, CASTELLATED HEXAGON, REGULAR HEIGHT, A-286, SILVER PLATED,
  800F, 160 SKI FTU (FOR USE IN CRITICATL APPLICATIONS)
  6 SIKORSKY
  SS5098 COLD EXPANSION OF HOLES IN ALUMINUM, TITANIUM, MILD STEEL AND HIGH STRENGTH,
  PROCESS FOR
  03 AMENDMENT 3-01 SIKORSKY
  SS5099 ROLLER BURNISHING OF MACHINED HOLES 2 SIKORSKY
  SS5100 HOLE SIZES 45 SIKORSKY
  SS5105 BOLT, SELF-RETAINING POSITIVE LOCKING CRES (PH13-8MO), 100 DEGREES FLUSH HD, 450
  DEGREES F
  2 SIKORSKY
  SS5111 BOLT-TWELVE POINT EXTERNAL WRENCHING DIFFUSED NICKEL CADMIUM PLATE 3 SIKORSKY
  SS5112 BOLT, SELF RETAINING POSITIVE LOCKING, CRES PH13-8Mo, HEX HD, 450° F FOR USE IN CRITICAL
  APPLICATIONS
  13 SIKORSKY
  SS5113 BUSHING INSTALLATION, FORCEMATE (FMCX) 1 SIKORSKY
  SS5113 BUSHING INSTALLATION, FORCEMATE (FMCX) 0 AMENDMENT 0-01 SIKORSKY
  SS5113 BUSHING INSTALLATION, FOR 0 AMENDMENT 0-02 SIKORSKY
  SS5113 BUSHING INSTALLATION, FOR 0 AMENDMENT 0-03 SIKORSKY
  SS5161 NUT, NICKEL ALLOY 718, SELF-LOCKING, DOUBLE HEX, 180 KSI TENSILE 4 SIKORSKY
  SS5162 NUT, SELF¿LKG, CASTELLATED HEXAGON, REGULAR HEIGHT, A¿286, SILVER PLATED, 160 KSI Ftu
  NON¿METALLIC INSERT (FOR USE IN CRITICAL APPLICATIONS)
  7 SIKORSKY
  SS5200 MINIMUM BEND RADII 0 SIKORSKY
  SS5205 ALUMINUM AND ALUMINUM ALLOY SHEET, THICKNESS TOLERANCE FOR SIKORSKY
  SS5209 BOLT, 12PT EXT WRENCHING STEEL, 180KSI 2 SIKORSKY
  SS5211 BOLT – 12 PT EXT WRENCHING,LONG THREAD, STEEL1 12 SIKORSKY
  SS5213 BOLT – 12 PT EXT WRENCHING,LONG THREAD, INCONEL 718, 220 KSI FTU MIN., FATIGUE RATED
  (FOR USE IN CRITICAL APPLICATIONS)
  11 SIKORSKY
  SS5300 SCREW, MACHINE PAN HEAD, STRUCTURAL SIX LOBE RECESS 3 SIKORSKY
  SS5301 SCREW, MACHINE PAN HEAD STRUCTURAL, CAPTIVE SIX LOBE RECESS 3 SIKORSKY
  SS5305 SCREW, MACHINE PAN HEAD, HIGH STRENGTH SIX LOBE RECESS (TIP CAP) 9 SIKORSKY
  SS5307 BOLT HEX HEAD, STRUCTURAL SIX LOBE RECESS 13 SIKORSKY
  SS55 FLARELESS FITTING CONNECTIONS, FABRICATION AND INSTALLATION OF 3 SIKORSKY
  SS6999 FLANGE, TUBE, STATIC PRESSURE 2 SIKORSKY
  SS7000 PLATE ASSEMBLY, MOUNT, CONSOLE TYPE, AIRCRAFT 24 SIKORSKY
  SS7001 STRIP PANEL FASTENER 11 SIKORSKY
  SS7007 GROUNDING AND BONDING ELECTRICAL, PROCEDURE F 22 SIKORSKY
  SS7039 BONDING JUMPER ASSEMBLY 22 SIKORSKY
  SS7052 WATERPROOFING OF ELECTRICAL CONNECTIONS BY POTTING APPLICATIONS TO 500 DEGREES F 7 SIKORSKY
  SS7058 Tying, Electric and Electronic Harnesses, Procedures for 6 SIKORSKY
  SS7060 Splices, Installation of 3 SIKORSKY
  SS7101 CUTOUT ELECTRICAL CONNECTOR 11 SIKORSKY
  SS7777 SIKORSKY MATERIAL AND PROCESS SPEC INDEX 42 SIKORSKY
  SS7777 SIKORSKY MATERIAL AND PROCESS SPEC INDEX 44 SIKORSKY
  SS8011 ALUMINUM ALLOYS, FABRICATION TEMPERATURE 2 SIKORSKY
  SS8012 Heat Treatment of 440C Stainless Steel 2 SIKORSKY
  SS8013 ALLUMINUM ALLOY 7075-T73 HEAT TREATMENT OF 10 SIKORSKY
  SS8013 HEAT TREATMENT OF ALUMINUM ALLOYS, 7075- 9 DEVIATION 1 SIKORSKY
  SS8015 CARBURIZING AND HEAT TREATING OF CASE HARDENING STEEL 13 SIKORSKY
  SS8018 ACCEPTANCE OF HEAT TREATED ALUMINUM PARTS 2 SIKORSKY
  SS8018 ACCEPTANCE OF HEAT TREATED ALUMINUM PARTS 2 DEVIATION 01 SIKORSKY
  SS8020 STEEL, COLD TREATMENT 4 SIKORSKY
  SS8043 ALUMINUM ALLOYS, HEAT TREATABLE WROUGHT ALLOYS 6 SIKORSKY
  SS8049 STEEL, 4340, PROCESSING OF 4 SIKORSKY
  SS8407 STRESS RELIEF AND EMBRITTLEMENT RELIEF BAKING 13 SIKORSKY
  SS8409 PLATING, CYANIDE COPPER STOP OFF FOR CASE HARDENING 7 SIKORSKY
  SS8409 PLATING, CYANIDE COPPER STOP OFF FOR CASE HARDENING 6 DEVIATION 6 SIKORSKY
  SS8409 PLATING, CYANIDE COPPER STOP OFF FOR CASE HARDENING 6 AMENDMENT 1 SIKORSKY
  SS8409 PLATING, CYANIDE COPPER STOP OFF FOR CASE HARDENING 6 AMENDMENT 2 SIKORSKY
  SS8409 PLATING, CYANIDE COPPER STOP OFF FOR CASE HARDENING 6 AMENDMENT 3 SIKORSKY
  SS8409 PLATING, CYANIDE COPPER STOP OFF FOR CASE HARDENING 6 AMENDMENT 4 SIKORSKY
  SS8416 PHOSPHATE COATING, MANGANESE, OF STEEL 14 SIKORSKY
  SS8423 DEGREASING OF METAL PARTS 6 SIKORSKY
  SS8423 DEGREASING OF METAL PARTS 6 DEVIATION 22 SIKORSKY
  SS8424 Descaling of Corrosion Resistant Steel 3 SIKORSKY
  SS8429 CHROMIUM PLATING (ELECTRODEPOSITED) OF STEEL 4 SIKORSKY
  SS8435 PASSIVATION OF CORROSION RESISTANT STEEL 9 SIKORSKY
  SS8437 REMOVAL OF WELDING FLUX (ALUMINUM ALLOYS) 4 SIKORSKY
  SS8442 VAPOR BLASTING 6 SIKORSKY
  SS8445 TITANIUM ALLOY 6AI-4V FORGING, DYNAMIC GRADE 8 SIKORSKY
  SS8446 WELD REPAIR OF ALUMINUM ALLOY CASTINGS 1 SIKORSKY
  SS8450 TITANIUM ALLOY 6Al-4V FORGINGS STATIC GRADE 3 SIKORSKY
  SS8452 TITANIUM ALLOY 6A1-4V FORGINGS, BETA SOLUTION 3 SIKORSKY
  SS8460 CLEANING OF STEEL PARTS 3 SIKORSKY
  SS8461 PREBOND COATING OF TITANIUM 8 SIKORSKY
  SS8463 PREPARATION OF TITANIUM SURFACE FOR PAINT PRIMER 0 SIKORSKY
  SS8481 ANODIZE, BRUSH CHROMIC/SULFURIC ACID 01 SIKORSKY
  SS8482 PHOSPHORIC ACID ANODIZING 6 SIKORSKY
  SS8483 ANODIC COATINGS FOR ALUMINUM AND ALUM ALLOYS 9 SIKORSKY
  SS8483 ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS 09 DEVIATION 01 SIKORSKY
  SS8483 ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS 09 DEVIATION 04 SIKORSKY
  SS8483 ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS 09 DEVIATION 09 SIKORSKY
  SS8486 CHEMICAL SURFACE TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS 15 SIKORSKY
  SS8486 CHEMICAL SURFACE TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS 15 DEVIATION 10 SIKORSKY
  SS8486 CHEMICAL SURFACE TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS 15 DEVIATION 11 SIKORSKY
  SS8486 CHEMICAL SURFACE TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS 15 DEVIATION 12 SIKORSKY
  SS8486 CHEMICAL SURFACE TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS 15 DEVIATION 15 SIKORSKY
  SS8491 THERMAL SPRAY PROCESSES 12 SIKORSKY
  SS8493 SURFACE PREPARATION OF ALUMINUM BRONZE AND CORROSION RESISTANT STEEL FOR
  PLATING
  1 SIKORSKY
  SS8499 ANODIZED AND CHEMICAL CONVERSION COATING ALUM 4 SIKORSKY
  SS8511 PAINT CODE 6 SIKORSKY
  SS8515 COATING, OXIDE PREVENTIVE FOR TITANIUM, APPLICATION OF 3 SIKORSKY
  SS8516 POLYURETHANE COATING, EROSION RESISTANT, APPLICATION OF 2 SIKORSKY
  SS8520 COATINGS AND FINISHES, ORGANIC AND INORGANIC, 5 SIKORSKY
  SS8520 COATING AND FINISHINGS, ORGANIC AND INORGANIC, STRIPPING OF Rev 5 DEVIATION 18 SIKORSKY
  SS8521 GENERAL REQUIREMENTS FOR ORGANIC FINISHES 7 SIKORSKY
  SS8522 REQUIREMENTS FOR ORGANIC FINISHES OF MILITARY AIRCRAFT 01 DEVIATION 01 SIKORSKY
  SS8522 REQUIREMENTS FOR ORGANIC FINISHES OF MILITARY AIRCRAFT 01 DEVIATION 02 SIKORSKY
  SS8522 REQUIREMENTS FOR ORGANIC FINISHES OF MILITARY AIRCRAFT 01 DEVIATION 03 SIKORSKY
  SS8522 REQUIREMENTS FOR ORGANIC FINISHES OF MILITARY AIRCRAFT 01 DEVIATION 04 SIKORSKY
  SS8522 REQUIREMENTS FOR ORGANIC FINISHES OF MILITARY AIRCRAFT 2 SIKORSKY
  SS8522 REQUIREMENTS FOR ORGANIC FINISHES OF MILITARY AIRCRAFT 3 SIKORSKY
  SS8522 REQUIREMENTS FOR ORGANIC FINISHES OF MILITARY AIRCRAFT 03 DEVIATION 01 SIKORSKY
  SS8526 POLYURETHANE TOPCOATS, GLOSS 9/6/05 SIKORSKY
  SS8530 COATING, WALKWAY, URETHANE BASE, PREPARATION AND APPLICATION 9 SIKORSKY
  SS8530 COATING, WALKWAY, URETHANE BASE, PREPARATION AND APPLICATION 8 AMENDMENT 1 SIKORSKY
  SS8530 COATING, WALKWAY, URETHANE BASE, PREPARATION AND APPLICATION OF 9 DEVIATION 01 SIKORSKY
  SS8530 COATING, WALKWAY, URETHANE BASE, PREPARATION AND APPLICATION OF 9 DEVIATION 02 SIKORSKY
  SS8535 CORROSION PREVENTION DURING MFG, STORAGE AND SHIPMEN 1 SIKORSKY
  SS8536 APPLICATION OF CORROSION INHIBITING COMPOUNDS 2 SIKORSKY
  SS8540 PRESERVATION OF BARE LOW ALLOY STEELS. BARE CAR 2 SIKORSKY
  SS8540 PRESERVATION OF BARE LOW ALLOY STEELS, DEVIATION 1 SIKORSKY
  SS8555 AIRCRAFT PAINT REQUIREMENTS 19 SIKORSKY
  SS8555 DEVIATION SHEET – AIRCRAFT PAINT REQUIREMENTS 17 DEVIATION 10 SIKORSKY
  SS8555 AIRCRAFT PAINT REQUIREMENTS 17 DEVIATION 08 SIKORSKY
  SS8556 ACCEPTANCE CRITERIA FOR PAINTED SURFACES COMMERICAL NEW SIKORSKY
  SS8557 WATER REDUCIBLE EPOXY AIRCRAFT COATING, RQMTS FOR NEW SIKORSKY
  SS8601 FILM ADHESIVE BONDING SYSTEM 6 SIKORSKY
  SS8603 APP OF ADHESIVE PRIMER 6 SIKORSKY
  SS8604 SEALING COMPOUNDS, HIGHADHESION FUEL TANK AND 3 SIKORSKY
  SS8605 ADHESIVE BONDING SYSTEM “A” MAIN AND TAIL ROTOR 3 SIKORSKY
  SS8606 ADHESIVE BONDING, SYSTEM “B” MAIN AND TAIL ROTO 4 SIKORSKY
  SS8607 ADHESIVE BONDING, SYSTEM “C” MAIN AND TAIL ROTO 10 SIKORSKY
  SS8609 ADHESIVE BONDING, SYSTEM “E” MAIN AND TAIL ROTO 2 SIKORSKY
  SS8609 ADHESIV BONDING, SYSTEM “E” MAIN AND TAIL AMENDMENT 1 SIKORSKY
  SS8609 ADH BONDING, SYSTEM ‘”E” MAIN AND TAIL AMENDMENT 2 SIKORSKY
  SS8609 ADHESIVE BONDIN AMENDMENT3 SIKORSKY
  SS8612 FILM ADHESIVE BONDING SYSTEM, STRUCTURAL COMP 12 SIKORSKY
  SS8612 FILM ADHESIVE BONDING SYSTEM, STRUCTURAL DEVIATION 1 SIKORSKY
  SS8613 SCRIM CLOTH AND POSITIONING MAT, FINISHED AND UNFINISHED, FO 5 SIKORSKY
  SS8614 PEEL PLY/BONDABLE SURFACE PRODUCING 5 SIKORSKY
  SS8617 BONDING, ADHESIVE, OF LEXAN 2 SIKORSKY
  SS8618 BONDING, ADHESIVE, OF INTERIOR PANELS 5 SIKORSKY
  SS8620 ADHESIVE SURFACING AGENTS 7 SIKORSKY
  SS8622 MULTIPLE PART PASTE ADHESIVES 10 SIKORSKY
  SS8629 SEALANT, LOW DENSITY, CORROSION INHIBITING 3 SIKORSKY
  SS8629 SEALANT, LOW DENSITY, CORROSION INHIBITING DEVIATION NO. 01 Rev 03 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 01 SIKORSKY
  SS8630 SS8630 SUPPLIER TECH HELP NEW SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 02 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 03 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 04 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 05 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 06 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 07 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 09 SIKORSKY
  SS8630 SEALING AND INSULATION OF MATING SURFACES 26 DEVIATION 10 SIKORSKY
  SS8639 BONDING, VULCANIZATION, RUBBER TO METAL 05 SIKORSKY
  SS8640 ADHESIVE BONDING GENERAL PURPOSE 25 SIKORSKY
  SS8654 SEALING COMPOUND, POLYSULFIDE, MIXING OF 12 SIKORSKY
  SS8655 COATING, PERMANENT RESIN, APPLICATION OF 6 SIKORSKY
  SS8655 COATING, PERMANENT RESIN, APP OF 6 DEVIATION 01 SIKORSKY
  SS8659 ADHESIVE BONDING (STRUCTURAL) REQUIREMENTS FOR 1 SIKORSKY
  SS8669 ADHESIVE BONDING 24 SIKORSKY
  SS8688 SURFACE SEALING (RESIN COATING) OF MAGNESIUM AND ALUMINUM ALLOYS 9 SIKORSKY
  SS8689 SEALANT, NON-CURING, CORROSION INHIBITING 6 SIKORSKY
  SS8692 Touch-up Of Black Oxide Coatings Or Phosphate Coatings 1 SIKORSKY
  SS8693 BRUSH COATING AND TOUCH UP 8 SIKORSKY
  SS8693 BRUSH COATING AND TOUCH-UP OF ALUMINUM AND ALUMINUM ALLOY SURFACE TREATMENTS Rev 8 DEVIATION 5 SIKORSKY
  SS8705 SURFACE TEMPER ETCH INSPECTION 19 SIKORSKY
  SS8705 SURFACE TEMPER ETCH INSPECTION 19 DEVIATION 15 SIKORSKY
  SS8706 TITANIUM PARTS, LOCAL BLENDING OF 4 SIKORSKY
  SS8707 GRINDING OF TITANIUM PARTS 4 SIKORSKY
  SS8708 TITANIUM PARTS, MACHINING OF 1 SIKORSKY
  SS8709 TITANIUM AND TITANIUM ALLOYS, HOT FORMING AND HOT SIZING OF 2 SIKORSKY
  SS8711 TITANIUM AND TITANIUM ALLOYS, STRESS RELIEVING 2 SIKORSKY
  SS8712 ETCHING REMOVAL OF FLOWED METAL 3 SIKORSKY
  SS8713 ALUMINUM ALLOY SHEET METAL PARTS, SUPERPLASTIC FORMING OF 3 SIKORSKY
  SS8743 STAKING OF GROOVED PLAINSPHERICAL BEARINGS 7 SIKORSKY
  SS8745 STAKING, BEARING (BALL) 7 SIKORSKY
  SS8752 PREPARATION OF SURFACES FOR ADHESIVE BONDING 13 SIKORSKY
  SS8752 PREPARATION OF SURFACES FOR ADHESIVE BONDING DEVIATION 22 SIKORSKY
  SS8752 Preparation of Surfaces for Adhesive Bonding DEVIATION 24 SIKORSKY
  SS8752 PREPARATION OF SURFACES FOR ADHESIVE BONDING 13 DEVIATION 27 SIKORSKY
  SS8766 SHOT PEENING OF TITANIUM ALLOYS 10 SIKORSKY
  SS8767 SHOT PEENING OF ALUMINUM ALLOYS 7 SIKORSKY
  SS8767 SHOT PEENING OF ALUMINUM ALLOYS 7 DEVIATION 01 SIKORSKY
  SS8774 SHOT PEENED PARTS, LOCAL ROTO PEEN REWORK 2 SIKORSKY
  SS8774 SHOT PEENED PARTS, LOCAL ROTO PEEN REWORK AMENDMENT 1 SIKORSKY
  SS8774 SHOT PEENED PARTS, LOCAL ROTO PEEN REWORK AMENDMENT 2 SIKORSKY
  SS8786 PAINT STRIPPING, IMMERSION BRUSH ON METHOD 6 SIKORSKY
  SS8786 PAINT STRIPPING, IMMERSION/BRUSH-ON METHOD 6 DEVIATION 01 SIKORSKY
  SS8786 PAINT STRIPPING, IMMERSION/BRUSH-ON METHOD 6 DEVIATION 02 SIKORSKY
  SS8786 PAINT STRIPPING, IMMERSION/BRUSH-ON METHOD 6 DEVIATION 03 SIKORSKY
  SS8786 PAINT STRIPPING, IMMERSION/BRUSH-ON METHOD 6 DEVIATION 04 SIKORSKY
  SS8787 STRIPPING OF ORGANIC MATERIALS 4* SIKORSKY
  SS8788 PAINT STRIPPING OF AIRCRAFT 1 SIKORSKY
  SS8798 IDENTIFICATION MARKING OF PART METHODS FOR 19 SIKORSKY
  SS8798 IDENTIFICATION MARKING OF PART, METHODS 18 DEVIATION 03 SIKORSKY
  SS8798 IDENTIFICATION MARKING OF PART, METHODS 18 DEVIATION 10 SIKORSKY
  SS8798 IDENTIFICATION MARKING OF PART, METHODS 18 DEVIATION 11 SIKORSKY
  SS8798 IDENTIFICATION MARKING OF PART, METHODS FOR 18 DEVIATION 04 SIKORSKY
  SS8805 INSPECTION PROCESS, MAGNETIC PARTICLE 13 SIKORSKY
  SS8806 INSPECTION, LIQUID PENETRANT 16 SIKORSKY
  SS8806 DEV DEVIATION SHEET – INSPECTION, LIQUID PENETRANT REV 16 – DEV 08 SIKORSKY
  SS8806 DEV DEVIATION SHEET – INSPECTION, LIQUID PENETRANT REV 16 – DEV 09 SIKORSKY
  SS8809 INSPECTION, ULTRASONIC, NON-METALICS, PROCES 5 SIKORSKY
  SS8810 ELECTRICAL CONDUCTIVITY TEST FOR MEA AMENDMENT 1 SIKORSKY
  SS8810 ELECTRICAL CONDUCTIVITY TEST FOR MEA AMENDMENT 2 SIKORSKY
  SS8810 ORIG ELECTRICAL CONDUCTIVITY TEST FOR MEASUREME 2 SIKORSKY
  SS8810 ELECTRICAL CONDUCTIVITY TEST FOR MEA DEVIATION 2 SIKORSKY
  SS8810 ELECTRICAL CONDUCTIVITY TEST FOR MEA DEVIATION 3 SIKORSKY
  SS8813 NONDESTRUCTIVE INSPECTION PLAN 4 SIKORSKY
  SS8866 LUBRICANT, SOLID FILM, APPLICATION OF 10 SIKORSKY
  SS8869 TEFLON-POLYURETHANE, LOW FRICTION 2 SIKORSKY
  SS8880 CARBON FIBER TOW 01 SIKORSKY
  SS8884 BOND CYCLE CERTIFICATION (BCC) PROCEDURES 01 SIKORSKY
  SS8888 COMPOSITE COMPONENTS, GENERALPROCESS SPECIFICATIONS FOR 10 SIKORSKY
  SS8888 COMPOSITE COMPONENTS, GENERAL PROCESS SPEC 10 DEVIATION 05 SIKORSKY
  SS8889 MONOLITHIC PLASTIC AIRCRAFT WINDOWS ACCEPTANCE CRITERIA FOR 9/24/92 SIKORSKY
  SS9001 TRADEMARKS AND SIGNATURES FOR PRODUCTS ID 35 SIKORSKY
  SS9034 INSIGNIA, NATIONAL 3 SIKORSKY
  SS9035 BRANCH OF SERVICE MARKING 8 SIKORSKY
  SS9036 DECALCOMANIAS, FABRICATION AND APPLICATION OF 9 SIKORSKY
  SS9038 STENCIL – NUMERICAL AIRCRAFT MARKING 3 SIKORSKY
  SS9048 PLATES, PHOTOGRAPHIC (PHOTOSENSITIVE ALUMINUM), PHOTO-ETCH, METAL PHOTO AND LASER
  MARKING, PROCESS FOR 11 SIKORSKY
  SS9049 ENGRAVING 8/23/60 SIKORSKY
  SS9058 COLOR CODE IDENTIFICATION FOR ROTOR HUBS 4 SIKORSKY
  SS9058 COLOR CODE IDENTIFICATION FOR ROTOR HUBS 4 AMENDMENT 01 SIKORSKY
  SS9058 COLOR CODE IDENTIFICATION FOR ROTOR HUBS 4 AMENDMENT 02 SIKORSKY
  SS9059 RESCUE MARKING 1 SIKORSKY
  SS9070 SERIAL NUMBER AND TRADEMARK IDENTIFICATION O 10 SIKORSKY
  SS9092 TAB, ATTACHING 3 SIKORSKY
  SS9096 CABLE ASSEMBLY, SPLICED EYE 11 SIKORSKY
  SS9100 Identification Marking of Altered, Selected, and Special Bolts 5 SIKORSKY
  SS9117 PLATE IDENTIFICATION UNIT OR PLUG¿IN ASSY 19 SIKORSKY
  SS9122 SHELF-LIFE, OUT-TIME AND STORAGE CONDITIONS FOR NONMETALLIC MATERIALS 21 SIKORSKY
  SS9123 PAINTS AND RELATED PRODUCTS – SHELF-LIFE/STORAGE CONDITIONS 3 AMENDMENT 3-01 SIKORSKY
  SS9123 PAINTS AND RELATED PRODUCTS – SHELF-LIFE/STORAGE CONDITIONS 3 SIKORSKY
  SS9140 PLATE (INFORMATION, INSTRUCTION AND/OR IDENTIFICATION) 61 SIKORSKY
  SS9141 LABELS, UID 5 SIKORSKY
  SS9142 LABELS, UID, UNIQUE IDENTIFICATION WITH NOMENCLATURE 13 SIKORSKY
  SS9143 LABELS, UID UNIQUE IDENTIFICATION NON¿METALLIC 1 SIKORSKY
  SS9152 PROPERTY EVALUATION METHODS FOR NONMETALLIC 1 SIKORSKY
  SS9152/AF6201 FABRICATION OF THICK ADHEREND BONDED 00 SIKORSKY
  SS9152/AM6201 INSTRUMENTED THICK ADHEREND SHEAR TES 0 SIKORSKY
  SS9152/PP0401 RESIN FLOW TEST (NO BLEEDER) 3* SIKORSKY
  SS9152/PP0402 RESIN FLOW TEST (BLEEDER) 3 SIKORSKY
  SS9152/PP0501 MEASUREMENT OF GEL TIME (HEATED PLATEN PRESS) 3 SIKORSKY
  SS9152/PP0502 MEASUREMENT OF GEL TIME (FISHER-JOHN 1 SIKORSKY
  SS9152/PP0601 MEASUREMENT OF VOLATILE CONTENT (ALUMINUM PAN / AIR CIRCULATING OVEN METHOD) 3 SIKORSKY
  SS9152/PP0602 MEASUREMENT OF VOLATILE CONTENT 1 SIKORSKY
  SS9152/PP0603 MEASUREMENT OF VOLATILE CONTENT 1 SIKORSKY
  SS9152/PP0901 MEASUREMENT OF RESIN CONTENT (SOLVENT 1 SIKORSKY
  SS9152/PP0901 MEASUR OF RESIN CONTENT SOLVENT AMENDMENT 1 SIKORSKY
  SS9152/PP0901 MEASUREMENT OF RESIN CONTENT AMENDMENT 2 SIKORSKY
  SS9152/PP1001 DETERMINATION OF GLASS TRANSITION TEMPERATURE BY DMA, SINGLE NEW SIKORSKY
  SS9152-PP0402 RESIN FLOW TEST (BLEEDER) 3 SIKORSKY
  SS9152-PP0902 MEASUREMENT OFRESIN CONTENT(BURN-OFF METHOD) 3* SIKORSKY
  SS9170 EXPENDABLE MANUFACTURING MATERIALS (EMM), GENERAL GENERAL 3 SIKORSKY
  SS9170/100 (EMM) ABRASIVE BLAST MEDIA,PLASTIC, CL 2 2 SIKORSKY
  SS9170/101 EXPENDABLE MANUFACTURING MATERIALS (EMM) 1 SIKORSKY
  SS9170/102 EXPENDABLE MANUFACTURING MATERIALS ABRASIVE 2 SIKORSKY
  SS9170/140 EXPENDABLE MANUFACTURING MATERIALS (EMM), VACUUM BAG MATERIAL CLASS 1 6 SIKORSKY
  SS9170/160 EXPENDABLE MANUFACTURING MATERIALS (EMM) VACUUM BAG EDGE BLEEDER CLASS (2) 3 SIKORSKY
  SS9170/161 EXPENDABLE MANUFACTURING MATERIALS (EMM) VACUUM BAG BLEEDER MATERIAL, NYLON
  POLYESTER CLASS (2)
  4 SIKORSKY
  SS9170/182 EXPENDABLE MANUFACTURING MATERIALS (EMM0) BRAZING FLUX CLASS (2) ORIGINAL SIKORSKY
  SS9170/200 EXPENDABLE MANUFACTURING MATERIALS ALKALINE CLEAN 01 SIKORSKY
  SS9170/201
  EXPENDABLE MANUFACTURING MATERIALS (EMM) ALKALINE CLEANERS, ETCH TYPE CLASS (2)
  12/11/1986 SIKORSKY
  SS9170/202 EXPENDABLE MANUFACTURING MATERIALS (EMM) CLEANERS, AIRCRAFT TYPE CLASS (2) 12/11/86 SIKORSKY
  SS9170/202 EXPENDABLE MANUFACTURING MATERIALS (EMM) CLEANERS, AIRCRAFT TYPE CLASS (2) 0 DEVIATION 01 SIKORSKY
  SS9170/203 EXPENDABLE MANUFACTURING MATERIALS (EMM) CLEANERS, ULTRASONIC CLASS (2) 2/1/2017 SIKORSKY
  SS9170/204 EMM CLEANERS FOR METALS AND COMP PARTS CL 2 SIKORSKY
  SS9170/205 POLISHING MATERIALS FOR THE SURFACE MAINTENANCE OF TRANSPARENT PLASTIC PARTS
  CLASS (2)
  2 SIKORSKY
  SS9170/240 EXPENDABLE MANUFACTURING MATERIALS (EMM) MACHINING LUBRICANTS, CLASS (2) 2 SIKORSKY
  SS9170/380 EXPENDABLE MANUFACTURING MATERIALS (EMM) THROWAWAY MIXING CUPS CLASS (2) 1 SIKORSKY
  SS9170/381 EXPENDABLE MANUFACTURING MATERIALS (EMM) TONGUE DEPRESSORS CLASS (2) 1 SIKORSKY
  SS9170/382 EMM MIXING PADDLES CLASS 2 SIKORSKY
  SS9170/479 EMM, PROTECTIVE HAND CREAM CLASS 2 SIKORSKY
  SS9170/501 EMM RELEASE AGENTS, MOLD PREP CLASS 7 SIKORSKY
  SS9170/502 EMM TEFLON COATED GLASS CLOTH, NON-POROUS 2 SIKORSKY
  SS9170/503
  EXPENDABLE MANUFACTURING MATERIALS (EMM) PTFE COATED GLASS CLOTH TAPE, CLASS (2)
  6 SIKORSKY
  SS9170/504 EMM RELEASE FABRIC, POROUS COATED CLASS 1 4 SIKORSKY
  SS9170/505 EXPENDABLE MANUFACTURINGMATERIALS (EMM) PEEL PLY RELEASE FABRICS CLASS (1) 4 SIKORSKY
  SS9170/506 EXPENDABLE MANUFACTURING MATERIALS (EMM) EPOXY IMPREGNATED NYLON PEEL PLY CLASS
  (1)
  2 SIKORSKY
  SS9170/520 EXPENDABLE MANUFACTURING MATERIALS (EMM) RELEASE FILM CLASS (1) 8 SIKORSKY
  SS9170/521 EXPENDABLE MANUFACTURING MATERIALS (EMM) SEPARATOR MATERIAL FOR PREPREG AND
  ADHESIVES CLASS (2)
  5 SIKORSKY
  SS9170/522 EXPENDABLE MANUFACTURING MATERIALS (EMM) PRESSURE STRIP INTE 5 SIKORSKY
  SS9170/540 EXPENDABLE MANUFACTURING MATERIALS (EMM) TOOLING RUBBER, UNREINFORCED AND
  KEVLAR REINFORCED FLUOROCARBON RUBBER CLASS (2)
  5 SIKORSKY
  SS9170/541 EXPENDABLE MANUFACTURING MATERIALS (EMM) VACUUM BLANKET AND BLANKET MATERIAL,
  SILICONE RUBBER CLASS (2)
  1 DEVIATION 01 SIKORSKY
  SS9170/541 EXPENDABLE MANUFACTURING MATERIALS (EMM) VACUUM BLANKET AND BLANKET MATERIAL,
  SILICONE RUBBER CLASS (2)
  1 SIKORSKY
  SS9170/542 EMM PRESSURE STRIP INTENSIFIER CLASS 2 SIKORSKY
  SS9170/543 EXPENDABLE MANUFACTURING MATERIALS (EMM) TOOLING TAPE, PRESSURE SENSITIVE
  ADHESIVE (CLASS 2)
  3 SIKORSKY
  SS9170/560 EMM BLENDED SOLVENTS, MANUAL CLEANING 3 SIKORSKY
  SS9170/560 EXPENDABLE MANUFACTURING MATERIALS (EMM DEVIATION 2 SIKORSKY
  SS9170/561 EXPENDABLE MANUFACTURING MATERIALS (EMM) DENATURED ALCOHOL (CLASS 1) 2 SIKORSKY
  SS9170/620 EMM HIGH PERFORMANCE MASKING TAPE 4 SIKORSKY
  SS9170/621 EXPENDABLE MANUFACTURING MATERIALS (EMM) TAPE, ADHESIVE FLASHBREAKER CLASS (2) 3 SIKORSKY
  SS9170/622 EXPENDABLE MANUFACTURING MATERIALS (EMM), TAPES, PRESSURE SENSITIVE CLASS (2) 4 SIKORSKY
  SS9170/660 EMM, VACUUM BAG SEALANT CLASS 6 SIKORSKY
  SS9170/680 EXPENDABLE MANUFACTURING MATERIALS WIPING 5 SIKORSKY
  SS9170/681 EMM, SOLVENT DAMPENED WIPER CLOTHS CLASS 5 SIKORSKY
  SS9170/682
  EXPENDABLE MANUFACTURING MATERIALS (EMM) GLOVES, COMPOSITE LAY-UP AND METAL
  BONDING, CLASS 2 4 SIKORSKY
  SS9170/700 EXPENDABLE MANUFACTURING MATERIALS (EMM) STRIPPER COPPER PLATE CLASS (2) 12/11/86 SIKORSKY
  SS9170/761 EXPENDABLE MANUFACTURING MATERIALS (EMM) CORROSION INHIBITORS – PETROLATUM CLASS
  (2) 4/27/1987 SIKORSKY
  SS9170/780 EXPENDABLE MANUFACTURING MATERIALS (EMM) CAST TOOLING MATERIAL CLASS (2) 1 SIKORSKY
  SS9171 STANDARD DRAWING CALL-OUTS FOR TRADE NAME MAT 1 SIKORSKY
  SS9182 SERVICE MODEL DESIGNATION, STENCIL OF 6 SIKORSKY
  SS9201 FASTENER INSTALL AND ACCEPT CRITERIA 10 SIKORSKY
  SS9204 BORON/EPOXY UNIDIRECTIONAL PREIMPREGNATED TAPE 2 SIKORSKY
  SS9205 TOLERANCES & CRITERIA FOR AIRFRAME 2 SIKORSKY
  SS9208 PRODUCT DEFINITION DESIGN CRITERIA 63 SIKORSKY
  SS9208 PRODUCT DEFINITION DESIGN CRITERIA 59 DEVIATION 01 SIKORSKY
  SS9208 PRODUCT DEFINITION DESIGN CRITERIA 63 DEVIATION 01 SIKORSKY
  SS9209 DRAWING INTERPRETATION MANUAL A SIKORSKY
  SS9211 FLIGHT SAFETY PARTS SOURCE APPROVAL, QUALITY AND TEST REQUIREMENTS 15 SIKORSKY
  SS9211 DEVIATION SHEET – FLIGHT SAFETY PARTS SOURCE APPROVAL, QUALITY AND TEST
  REQUIREMENTS Rev 15 – Dev 01 SIKORSKY
  SS9211 DEV DEVIATION SHEET – FLIGHT SAFETY SOURCE APPROVAL, QUALITY AND TEST REQUIRMENTS 15 SIKORSKY
  SS9212 Aluminum Bronze Ekonal Powder, Plasma Spray 1 SIKORSKY
  SS9213 SUPPLEMENT TO MATERIAL AND PROCESS SPECIFICATIONS INDEX, MET 12 SIKORSKY
  SS9214 ALTERNATE ORGANIC FINISHES 9 SIKORSKY
  SS9217 KEVLAR HONEYCOMB CORE 2 SIKORSKY
  SS9220 ADHESIVE BONDED COMPOSITE SANDWICH PANELS, HONEYCOMB CORE, R 6 SIKORSKY
  SS9220 Adhesive Bonded Composite Sandwich Panels, Honeycomb Core, Requirements for 6 DEV 01 SIKORSKY
  SS9221 ALUMINUM HONEYCOMB CORE 2 SIKORSKY
  SS9222 GLASS HONEYCOMB CORE 4 SIKORSKY
  SS9223 POLYAMIDE HONEYCOMB CORE 4 SIKORSKY
  SS9223 POLYAMIDE HONEYCOMB CORE AMENDMENT 1 SIKORSKY
  SS9223 POLYAMIDE HONEYCOMB CORE AMENDMENT 2 SIKORSKY
  SS9225 ADHESIVE BONDED ALUM SANDWICH PANELS 14 SIKORSKY
  SS9225 ADHESIVE BONDED ALUMINUM SANDWICH PANE AMENDMENT 1 SIKORSKY
  SS9225 ADHESIVE BONDED ALUMINUM SANDWICH PANE AMENDMENT 2 SIKORSKY
  SS9225 ADHESIVE BONDED ALUMINUM SANDWICH PANE AMENDMENT 3 SIKORSKY
  SS9225 ADHESIVE BONDED ALUMINUM SANDWICH PANE AMENDMENT 4 SIKORSKY
  SS9225 ADHESIVE BONDED ALUMINUM SANDWICH PANE AMENDMENT 5 SIKORSKY
  SS9226 ADHESIVE BONDING, TEST PANELS 4 SIKORSKY
  SS9226 ADHESIVE BONDING, TEST PANELS DEVIATION 5 SIKORSKY
  SS9226 ADHESIVE BONDING, TEST PANELS 04 DEVIATION 07 SIKORSKY
  SS9230 ADHESIVE FOR INTERIOR PANELS 3 SIKORSKY
  SS9231 ACOUSTIC PANEL, HONEYCOMB CORE, PROCESS SPECIFICATION FOR 5 SIKORSKY
  SS9232 TRIM CLOTH MATERIALS, PANELS AND BLANKETS 9 SIKORSKY
  SS9233 PROCUREMENT AND FLAMMABILITY REQUIREMENTS FOR MATERIALS USED IN PASSENGER
  CARRYING CABINS
  5 SIKORSKY
  SS9300 TORQUE, WRENCH AND TIGHTENING 35 SIKORSKY
  SS9309 PROCESSING AREAS, COMPOSITES AND STRUCTURAL ADHESIVES, CONTROLLED ENVIRONMENT 4 SIKORSKY
  SS9309 Deviation Sheet – Processing Areas, Composites and Structural Adhesives, Controlled Environment 04 SIKORSKY
  SS9311 DYNAMIC COMPONENT ASSEMBLY AREA, CONTROLLED ENVIRONMENT 4 SIKORSKY
  SS9312 HYDRAULIC COMPONENTS ASSEMBLY AREA, CONTROLLED ENVIRONMENT 2 SIKORSKY
  SS9314 HYDRAULIC AND FLUID SYSTEM COMPONENTS, CLEANLINESS REQUIREMENTS FOR 4 SIKORSKY
  SS9440 NON-LOAD BEARING SYNTACTIC FOAM FILLER MATERIAL 0 SIKORSKY
  SS9440 NON-LOAD BEARING SYNTACTIC FOAM FILLER MATERIAL 0 AMENDMENT 01 SIKORSKY
  SS9440 NON-LOAD BEARING SYNTACTIC FOAM FILLER MATERIAL 0 AMENDMENT 02 SIKORSKY
  SS9440 NON-LOAD BEARING SYNTACTIC FOAM FILLER MATERIAL 0 AMENDMENT 03 SIKORSKY
  SS9443 SELECTIVE (BRUSH PLATING) ELECTRODEPOSITION 5 SIKORSKY
  SS9450 RESIN SYSTEMS FOR FABRICATION OF STRUCTURAL COMPOSITES 1 SIKORSKY
  SS9450 RESIN SYSTEMS FOR FABRICATION OF STRUCTURAL COMPOSITES 1 AMENDMENT 1-01 SIKORSKY
  SS9450 RESIN SYSTEMS FOR FABRICATION OF STRUCTURAL COMPOSITES 1 AMENDMENT 1-02 SIKORSKY
  SS9450 RESIN SYSTEMS FOR FABRICATION OF STRUCTURAL COMPOSITES 1 AMENDMENT 1-03 SIKORSKY
  SS9451 TACKIFIER FOR FABRICATION OF STRUCTURAL COMPOSI 3 SIKORSKY
  SS9452 RESIN SYSTEMS FOR FABRICATION OF STRUC COMPOSI 2 SIKORSKY
  SS9460 RESIN SYSTEMS FOR REPAIR OF NONSTRUCTURAL LAMINATES 4 SIKORSKY
  SS9501 ADHESIVE, URETHANE 1 SIKORSKY
  SS9502 ADHESIVE, EPOXY BASE, EXPANDING 10 SIKORSKY
  SS9503 GRAPHITE FIBER, ROVING 0 SIKORSKY
  SS9503 GRAPHITE FIBER, ROVING 0 AMENDMENT 0-01 SIKORSKY
  SS9507 THERMOPLASTIC SHEET, RIGID 6 SIKORSKY
  SS9512 CLOTH, POLYESTER, WOVEN FILAMENT YARNS 1 SIKORSKY
  SS9512 CLOTH, POLYESTER, WOVEN FILAMENT YARNS 1 AMENDMENT 1-01 SIKORSKY
  SS9513 CARBON FIBER CLOTH, WOVEN 2 SIKORSKY
  SS9516 CLOTH, NOMEX, POLYESTER POLYURETHANE COATED 2 SIKORSKY
  SS9517 FOAM, CLOSED CELL RIGID NON STRUCTURAL 1 SIKORSKY
  SS9518 BATTING, INSULATION, GLASS FIBERS 3 SIKORSKY
  SS9523 FOAM, POLYURETHANE, RIGID TWO COMPONENT, POUR-IN-PLACE 9 SIKORSKY
  SS9524 FOAM, POLYURETHANE, RIGID BALLISTIC, MOLDED P 3 SIKORSKY
  SS9526 RUBBER, SILICONE, FLAME RESISTANT 2 SIKORSKY
  SS9529 RUBBER, POLYURETHANE, GENERAL PURPOSE 04 SIKORSKY
  SS9534 RUBBER, POLYURETHANE, THERMOPLASTIC 3 SIKORSKY
  SS9536 RUBBER PARTS, NOTCHING AND CUTTING 1 SIKORSKY
  SS9542 PLASTIC LAMINATE MATERIALS, BORON/EPOXY COMPOSITES, PROCESS SPECIFICATION FOR 1 SIKORSKY
  SS9545 FUELS, LUBRICANTS, CORROSION PREVENTIVE COMPOUNDS, AND ANTISEIZE COMPOUNDS 4 SIKORSKY
  SS9546 EPOXY SYNTACTIC FILM 1 SIKORSKY
  SS9546 EPOXY SYNTACTIC FILM 1 AMENDMENT 01 SIKORSKY
  SS9546 EPOXY SYNTACTIC FILM 1 AMENDMENT 02 SIKORSKY
  SS9565 EROSION COATING – RUBBER 1 SIKORSKY
  SS9574 CLOTH, GLASS, FINISHED, FOR PLASTIC LAMINATES 4 SIKORSKY
  SS9575 WINDOWS, TRANSPARENT PLASTIC SIGHT GLASS – MARKING OF 1 SIKORSKY
  SS9576 PLASTIC PARTS, TRANSPARENT, SURFACE MAINTENANCE OF 3 SIKORSKY
  SS9578 CLOTH, GLASS, EPOXY RESIN PREIMPREGNATED 18 SIKORSKY
  SS9578 CLOTH, GLASS, EPOXY RESIN IMPREGNATED 18 DEVIATION 1 SIKORSKY
  SS9579 RUBBER PARTS USE OF NOTE DECAL ON DRAWINGS 3 SIKORSKY
  SS9581 FIBER LAMINATED PRODUCTS, SURFACE FINISH REQUIREMENTS FOR 9 SIKORSKY
  SS9582 FIBER, LAMINATED PRODUCTS, FILLER PROCEDURE FOR 13 SIKORSKY
  SS9583 PLASTIC LAMINATED PRODUCTS, GLASS, GRAPHITE, AND ORGANIC FIBER THERMOSETTING RESIN
  IMPREGNATED, REQUIREMENTS FOR
  11 SIKORSKY
  SS9584 QUALITY CONTROL OF REINFORCED PLASTIC AIRCRAFT DUCTS FOR ELEVATED TEMPERATURE
  APLLICATIONS
  2 SIKORSKY
  SS9587 SYNTACTIC FOAM FILLER MATERIALS 9 SIKORSKY
  SS9587 SYNTACTIC FOAM FILLER MATERIALS 9 DEVIATION 1 SIKORSKY
  SS9588 FIBERGLASS EPOXY LAMINATES AND HONEYCOMB SAND 5 SIKORSKY
  SS9590 CASTING RESIN PLASTIC, USE OF 4 SIKORSKY
  SS9594 PLASTIC LAMINATE MATERIALS, GLASS FIBER BASE, POLYSESTER RESIN, LOW PRESSURE
  LAMINATED SPECIFICATION FOR PROCESSING OF 4 SIKORSKY
  SS9601 POLYURETHANE COATING FOR FIBER LAMINATED PLASTIC PARTS 3 SIKORSKY
  SS9609 FILLER CAP & ADAPTER UNIT 6 SIKORSKY
  SS9610 GLASS FILAMENT (E&S GLASS)/EPOXY RESIN PREIMPREGNATED MATERIAL 6 AMENDMENT 03 SIKORSKY
  SS9610 GLASS FILAMENT (E&S GLASS)/EPOXY RESIN PREIMPREGNATED MATERIAL 6 AMENDMENT 02 SIKORSKY
  SS9610 GLASS FILAMENT (E&S GLASS)/EPOXY RESIN PREIMPREGNATED MATERIAL 6 AMENDMENT 01 SIKORSKY
  SS9610 GLASS FILAMENT (E&S GLASS)/EPOXY RESIN PREIMPREGNATED MATERIAL 6 SIKORSKY
  SS9612 ORGANIC FIBER CLOTH (ARAMID) EPOXY RESIN PREIM 11 SIKORSKY
  SS9615 ALUMINUM MESH SCREEN LIGHTNING PROTECTION, COMPOSITE PARTS 3 SIKORSKY
  SS9616 ALUMINUM ALLOY HAND FORGINGS 2 SIKORSKY
  SS9618 CLOTH, NYLON, PREIMPREGNATED RESIN 3 SIKORSKY
  SS9621 LEAD ALLOYS FOR COUNTERWEIGHTS 3 SIKORSKY
  SS9622 ORGANIC FIBER CLOTH EPOXY RESIN PREIMPREGNATED MATERIAL, NOM 4 SIKORSKY
  SS9625 GRAPHITE ROVING/EPOXY RESIN PREIMPREGNATED MATERIAL 7 SIKORSKY
  SS9626 GRAPHITE FIBER TAPE/EPOXY RESIN PREIMPREGNATED MATERIAL, CONTROLLED FLOW 7 SIKORSKY
  SS9626 Graphite Fiber Tape/Epoxy Resin Preimpregnated Material, Controlled Flow 7 DEVIATION 02 SIKORSKY
  SS9628 KEVLAR ROVING/EPOXY PREIMPREGNATED MATERIAL Kevlar is a DuPont trademark 2 SIKORSKY
  SS9630 ALUMINUM FOIL AND MESH SCREEN, EPOXY RESIN PREIMPREGNATED FOR LIGHTNING
  PROTECTION
  06 SIKORSKY
  SS9630 Aluminum Mesh Screen, Epoxy Resin Preimpregnated for Lightning Protection 06 DEVIATION 01 SIKORSKY
  SS9632 UNIDIRECTIONAL GRAPHITE FIBER MODIFIED EPOXY RESIN PREIMPREGNATED MATERIAL 2 SIKORSKY
  SS9638 PERFORATED COPPER FOILS AND STAINLESS STEEL SCREEB AND CLOTH 2 SIKORSKY
  SS9639 EPOXY IMPREGNATED EXPANDED COPPER FOIL 2 SIKORSKY
  SS9639 EPOXY IMPREGNATED EXPANDED COPPER FOIL 2 DEVIATION 01 SIKORSKY
  SS9641 350° F CURING EPOXY IMPREGNATED 1 SIKORSKY
  SS9641 350 °F (177° C) CURING EPOXY IMPREGNATED UNID DEVIATION 2 SIKORSKY
  SS9642 350° F CURING EPOXY IMPREGNATED WOVEN GRAPHITE 3 SIKORSKY
  SS9690 NON METALLIC DEVELOPMENT MATERIALS 4 SIKORSKY
  SS9699 ACCEPTANCE CRITERIA FOR LAMINATED AIRFRAME PART 6 SIKORSKY
  SS9702 STEEL, 4340 DEVM FORGED PARTS 4 SIKORSKY
  SS9703 STEEL, 4340, AIR MELT, FORGED PARTS 2 SIKORSKY
  SS9998 Standard Parts Index 6 SIKORSKY
  SS9999 STATUS OF STANDARDS CG SIKORSKY
  SSQR-01 Sikorsky Supplier Quality Requirements 3 SIKORSKY
  SSQR-20.1 Supplier Sampling Requirements 6** SIKORSKY
  STH-14-5203 SUPPLIER TECH HELP ORG SIKORSKY
  ASQR-07.5 CONTROL OF SOFTWARE UNITED TECH
  ASQR-09.1 FLIGHT SAFETY PARTS PROGRAM 6 UNITED TECH
  ASQR-15.1 FOREIGN OBJECT DAMAGE/DEBRIS PREVENTION, HANDLING, STORAGE, 2 UNITED TECH
  ASQR-20.1 SUPPLIER SAMPLING REQUIREMENTS 4 UNITED TECH

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN-10204 3.1 / DIN-50049 3.1 / ISO-10474 3.1, EN-10204 3.2
Mill Test Certificate, Material Test Certificate, BIS Approved, BIS Certified, B.I.S Approval, B.I.S Certification, ISI Mark, ISI Logo, ISI Certified,
NACE-HIC TM-0284 / NACE-MR-0103 / NACE-MR-0175 / ISO-15166, BS EN-9001, BS EN-9100, AS-9100, AS-9100D, IATF-16949,
NADCAP Certified, ITAR Compliant, CE-Marked, CE-Marking, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
PED Certified, RoHS Compliant, ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2024, API-6A (American Petroleum Institute),
with EN-10204 3.2 Certificate, Duly Certified & Approved by IBR (Indian Boiler Regulations), IACS Class, LR Class (Lloyd’s Register),
GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS Class (American Bureau of Shipping), SGS, TUV, RINA,
IR Class (Indian Register of Shipping), DGAQA Approved, NORSOK Approved Standard M-630, M-650 Rev.3, DFAR/DFARS Compliant,
NADCAP Certified For Ministry of Defence, DRDO, DGQA Approved, Indian Ordnance Factory, Heavy Vehicle Factory, Indian Defence,
Bharat Electronics Limited (BEL), Hindustan Aeronautics Limited (HAL), Bharat Forge Limited, Mishra Dhatu Nigam Limited (MIDHANI),
Bharat Dynamics Limited (BDL), Indian Navy (Naval Dockyard), Mazagon Dock Shipbuilders Limited (MDL), Yantra India Limited (YIL),
National Thermal Power Corporation Limited (NTPC), Bharat Heavy Electricals Limited (BHEL), Larsen & Toubro Ltd. (L&T), Aerospace,
Aviation, Electric Vehicles, Armour Vehicle, Armor Vehicle, Automotive, Automobile, Railways, Medical Equipments, Military Missiles, Energy,
Power Sector, Electronics, Power Generation, Oil & Gas, Petroleum, Natural Gas, Wind Mill, Turbine, Engine, Boilers

DFARS Compliant Countries 2025 – DFARS Approved Countries 2025
DFAR Compliant Countries 2025 – DFAR Approved Countries 2025
United States, Australia, Austria, Belgium, Canada, Czech Republic, Denmark, Egypt, Estonia, Finland, France, Germany, Greece, Israel,, Italy,
Japan, Latvia, Luxembourg, Netherlands, Norway, Poland, Portugal, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom – Northern Ireland

Heat Treatment Supply Condition : Annealed, Solution Annealed, Normalised, Normalized, Hardened & Tempered (H&T), Quenched & Tempered (Q+T),
Oil Quenching, Water Quenching, TMCP
Heat-Treatment Supply-Condition : Soft Annealed, Solution-Annealing, Normalize, Normalized Rolled (+N), Furnace Normalized, Normalized & Tempered,
Hardened Tempered (+HT), H&T, Quenched Tempered (+QT), Q&T, Oil-Quenched, Water-Quenched

Make And Origin : India, Japan, Korea, Russia, China, Europe, Germany, Spain, Italy, Belgium, France, Sweden, Switzerland, Austria, Australia, Taiwan,
Brazil, U.K, America, USA
Make And Origin : Indian, Japanese, Korean, South Korea, Russian, Chinese, European, Swedish, Australian, UK, American, United Kingdom, U.S.A

Top Leading Steel Maker Manufacture In The World – Shandong Iron and Steel Group (China), PAO Severstal (Russia), Thyssenkrupp Ag (Germany),
Voestalpine AG (Austria), CITIC Pacific Special Steel Holdings (China), SSAB AB (Sweden), Hebei Puyong Iron and Steel Group Co., Ltd. (China),
Tata Steel (India), China Steel Corporation (China), JFE Steel Corporation (Japan), Nippon Steel Corporation NSC (Japan), Daido Steel (Japan),
HBIS Group (China), Baosteel Group Corporation (China), Gerdau S.A. (Brazil), Metinvest Holding, LLC (Ukraine), Nucor Corporation (U.S.A),
Hyundai Steel Company (South Korea), Novolipetsk Steel (NLMK) (Russia), JSW Steel (India), United States Steel Corporation USS (U.S.A),
Posco Iron And Steel Group (South Korea), Hyundai Steel (South Korea), ArcelorMittal S.A. (Luxembourg), Steel Authority of India SAIL (India),
Jindal Steel And Power JSPL (India), ArcelorMittal Nippon Steel AMNS (India), Nippon Steel & Sumitomo Metal Corporation NSSMC (Japan)

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com

Note : All product names, logos, brands, trademarks and registered trademarks are property of their respective owners.
All company, product and service names used in this website are for identification purposes only.
Use of these names, trademarks and brands does not imply endorsement.