Discontinued Replaced By
A 4 (1965) A 3 – Steel Joint Bars, Low, Medium and High Carbon (Non-Heat-Treated)
A 5 (1979) A 3 – Steel Joint Bars, Low, Medium and High Carbon (Non-Heat-Treated)
A 7 (1967)
A 36 – Carbon Structural Steel (For Rolled Shapes)
A 283 – Low and Intermediate Tensile Strength Carbon Steel Plates
A 306 – Discontinued 1975; Replaced by A 663 – Steel Bars, Carbon, Merchant Quality, Mechanical
Properties, and A 675 – Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A 8 (1963) No Replacement
A 9 (1940) No Replacement
A 10 (1970) A 283 – Low and Intermediate Tensile Strength Carbon Steel Plates
A 11 (1930) A 113 – Discontinued 1979; No Replacement
A 12 (1934) A 131 – Structural Steel for Ships
A 13 (1934) A 131 – Structural Steel for Ships
A 14 (1950) A 68 – Discontinued 1975; Replaced by A 689 – Carbon and Alloy Steel Bars for Springs
A 15 (1969) A 615 – Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A 16 (1969) A 616 – Rail-Steel Deformed and Plain Bars for Concrete Reinforcement
A 17 (1945) A 273 & A 274 – Discontinued 1975; Replaced by A 711 – Steel Forging Stock
A 18 (1940) A 236 – Discontinued 1981; No Replacement
A 19 A 236 – Discontinued 1981; No Replacement
A 22 (1934) A 57 – Discontinued 1966; Replaced by A 504 – Wrought Carbon Steel Wheels
A 23 (1917) A 57 – Discontinued 1966; Replaced by A 504 – Wrought Carbon Steel Wheels
A 24 (1917) A 57 – Discontinued 1966; Replaced by A 504 – Wrought Carbon Steel Wheels
A 25 (1993) A 504 – Wrought Carbon Steel Wheels
A 26 (1966) A 551 – Steel Tires
A 28 (1925) A 83 – Discontinued 1967; Replaced by A 192 – Seamless Carbon Steel Boiler Tubes for High-Pressure
Service
A 30 (1964) No Replacement
A 32 (1927)
A 107 – Discontinued 1968; Replaced by A 575 – Steel Bars, Carbon, Merchant Quality, M-Grades, and A 576
– Steel Bars, Carbon, Hot-Wrought, Special Quality
A 108 – Steel Bars, Carbon, Cold Finished, Standard Quality
A 33 (1937) E 30 – Discontinued 1995; No Replacement
A 35 (1937) No Replacement
A 37 (1936) No Replacement
A 38 (1924) A 83 – Discontinued 1967; Replaced by A 192 – Seamless Carbon Steel Boiler Tubes for High-Pressure
Service
A 39 (1920) A 84 – Discontinued 1972; No Replacement
A 40 (1920) A 84 – Discontinued 1972; No Replacement
A 41 (1956) No Replacement
A 42 (1972) No Replacement
A 43 (1992) No Replacement
A 44 (1955) A 377 – Index of Specifications for Ductile-Iron Pressure Pipe
A 45 (1943) No Replacement
A 46 (1943) No Replacement
A 47M (1999) A 47/A 47M – Specification for Ferritic Malleable Iron Castings
A 50 (1937) A 183 – Carbon Steel Track Bolts and Nuts
A 51 (1937) A 183 – Carbon Steel Track Bolts and Nuts
A 52 (1925) A 83 – Discontinued 1967; Replaced by A 192 – Seamless Carbon Steel Boiler Tubes for High-Pressure
Service
A 54 (1927)
A 107 – Discontinued 1968; Replaced by A 575 – Steel Bars, Carbon, Merchant Quality, M-Grades, and A 576
– Steel Bars, Carbon, Hot-Wrought, Special Quality
A 108 – Steel Bars, Carbon, Cold Finished, Standard Quality
A 55 (1937) E 30 – Discontinued 1995; No Replacement
A 56 (1972) No Replacement
A 57 (1966) A 504 – Wrought Carbon Steel Wheels
A 58 (1943) A 689 – Carbon and Alloy Steel Bars for Springs
A 59 (1966) A 689 – Carbon and Alloy Steel Bars for Springs
A 60 (1966) A 552 – Discontinued 1974; Replaced by A 689 – Carbon and Alloy Steel Bars for Springs
Discontinued Replaced By
A 61 (1969) A 616 – Rail-Steel Deformed and Plain Bars for Concrete Reinforcement
A 62 (1949) No Replacement
A 63 (1941) A 237 – Discontinued 1975; Replaced by A 668 – Steel Forgings, Carbon and Alloy, for General Industrial Use
A 238 – Discontinued 1989; Replaced by A 730 – Forgings, Carbon and Alloy Steel, for Railway Use
A 64 (1937) E 30 – Discontinued 1995; No Replacement
A 68 (1975) A 689 – Carbon and Alloy Steel Bars for Springs
A 69 (1927) No Replacement
A 70 (1947) A 285 – Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A 71 (1937) No Replacement
A 72 (1972) No Replacement
A 73 (1972) No Replacement
A 75 (1921) A 47 – Ferritic Malleable Iron Castings
A 76 (1981) A 183 – Carbon Steel Track Bolts and Nuts
A 77 (1935) No Replacement
A 78 (1947) A 283 – Low and Intermediate Tensile Strength Carbon Steel Plates
A 79 (1921) A 84 – Discontinued 1972; No Replacement
A 80 (1927)
A 107 – Discontinued 1968; Replaced by A 575 – Steel Bars, Carbon, Merchant Quality, M-Grades, and A 576
– Steel Bars, Carbon, Hot-Wrought, Special Quality
A 108 – Steel Bars, Carbon, Cold Finished, Standard Quality
A 81 (1972) No Replacement
A 83 (1967) A 192 – Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A 84 (1972) No Replacement
A 85 (1953) No Replacement
A 86 (1963) No Replacement
A 87 (1947) A 27 – Steel Castings, Carbon, for General Application
A 88 (1933) A 48 – Gray Iron Castings [Metric]
A 89 (1947) A 285 – Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A 91 (1940) No Replacement
A 92 (1937) No Replacement
A 93 (1965)
A 525 – Discontinued 1994; Replaced by A 653 – Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron AlloyCoated (Galvannealed) by the Hot-Dip Process, and A 924 – General Requirements for Steel Sheet, MetallicCoated by the Hot-Dip Process
A 94 (1966) No Replacement
A 95 (1957) A 216 – Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A 96 (1965) A 193 – Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
A 97 (1935) No Replacement
A 98 (1992) No Replacement
A 103 E 32 – Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
A 104 (1939) E 31 – Discontinued 1995; No Replacement
A 107 (1968) A 575 – Steel Bars, Carbon, Merchant Quality, M-Grades
A 576 – Steel Bars, Carbon, Hot-Wrought, Special Quality
A 109M (1998) A 109/A 109M
A 110 (1936) A 90 – Test Method for Weight (Mass) of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A 112 (1990) No Replacement
A 113 (1979) No Replacement
A 114 (1940) No Replacement
A 115 (1937) No Replacement
A 117 (1956) A 392 – Zinc-Coated Steel Chain-Link Fence Fabric
A 118 (1933) No Replacement
A 119 (1943) E 44 – Discontinued; Redesignated A 919 – Terminology Relating to Heat Treatment of Metals
A 120 (1987) A 53 – Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless
A 122 (1963) A 475 – Zinc-Coated Steel Wire Strand
A 124 (1940) No Replacement
A 127 Redesignated A 340 – Terminology of Symbols and Definitions Relating to Magnetic Testing
A 129 (1969) No Replacement
A 130 (1937) E 30 – Discontinued 1995; No Replacement
Discontinued Replaced By
A 133 (1941) A 237 – Discontinued 1975; Replaced by A 668 – Steel Forgings, Carbon and Alloy, for General Industrial Use
A 238 – Discontinued 1989; Replaced by A 730 – Forgings, Carbon and Alloy Steel, for Railway Use
A 136 (1945) No Replacement
A 137 (1943) No Replacement
A 138 (1945) No Replacement
A 140 (1935) No Replacement
A 141 (1967) A 502 – Steel Structural Rivets
A 142 (1977) A 716 – Ductile Iron Culvert Pipe
A 145 (1940) A 132 – Ferromolybdenum
A 147 (1984) No Replacement
A 149 (1940)
A 212 – Discontinued 1967; Replaced by A 515 – Pressure Vessel Plates, Carbon Steel, for Intermediate- and
Higher-Temperature Service, and A 516 – Pressure Vessel Plates, Carbon Steel, for Moderate- and LowerTemperature Service
A 150 (1940)
A 212 – Discontinued 1967; Replaced by A 515 – Pressure Vessel Plates, Carbon Steel, for Intermediate- and
Higher-Temperature Service, and A 516 – Pressure Vessel Plates, Carbon Steel, for Moderate- and LowerTemperature Service
A 151 (1938) No Replacement
A 152 (1972) No Replacement
A 154 (1936) A 180 – Discontinued 1937; Replaced by A 27 – Steel Castings, Carbon, for General Application
A 155 (1978)
A 671 – Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A 672 – Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A 691 – Carbon and Alloy Steel Pipe, Electric Fusion-Welded for High-Pressure Service at High Temperatures
A 156 (1936) A 146 – Molybdenum Oxide Products
A 157 (1953)
A 217 – Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts Suitable for HighTemperature Service
A 351 – Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
A 158 (1953) A 335 – Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A 160 (1969) A 617 – Axle-Steel Deformed and Plain Bars for Concrete Reinforcement
A 161 (1999) A 192 – Seamless Carbon Steel Boiler Tubes for High Pressure Service
A 209 – Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A 162 (1973) No Replacement
A 163 (1972) No Replacement
A 164 (1981) B 663 – Silver-Tungsten Carbide Electrical Contact Material
A 165 (1988) B 766 – Electrodeposited Coatings of Cadmium
A 166 (1968) B 456 – Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
A 168 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 169 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 170 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 171 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 172 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 173 (1954)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
Discontinued Replaced By
A 174 (1940)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 175 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 177 (1989) A 666 – Annealed or Cold-Worked Austenitic Stainless Steel, Sheet, Strip, Plate, and Flat Bar
A 180 (1937) A 27 – Steel Castings, Carbon, for General Application
A 186 (1966) A 504 – Wrought Carbon Steel Wheels
A 187 (1943) No Replacement
A 188 (1943) No Replacement
A 189 (1972) No Replacement
A 190 (1962) No Replacement
A 191 (1942) A 239 – Test Method for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles by
the Preece Test (Copper Sulfate Dip)
A 195 A 502 – Steel Structural Rivets
A 196 (1962) No Replacement
A 197M (1998) A 197/A 197M
A 198 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 199/A 199M (1995) A 200 – Seamless Intermediate Alloy-Steel Still Tubes for Refinery Service
A 200 (1999) A 213 – Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A 201 (1967) A 515 – Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A 516 – Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A 205 (1967) A 233 – Discontinued 1970; No Replacement
A 251 – Discontinued 1970; No Replacement
A 206 (1953) A 335 – Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A 207 (1972) No Replacement
A 208 (1941) A 239 – Test Method for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles by
the Preece Test (Copper Sulfate Dip)
A 211 (1993) No Replacement
A 212 (1967) A 515 Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A 516 – Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A 215 (1947) A 27 – Steel Castings, Carbon, for General Application
A 218 (1963) A 475 – Zinc-Coated Steel Wire Strand
A 219 (1972)
B 487 – Test Method for Measurement of Metal and Oxide Coating Thicknesses by Microscopical Examination
of a Cross Section
B 499 – Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic
Coatings on Magnetic Basis Metals
B 504 – Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
B 529 – Discontinued 1979; Replaced by B 244 – Test Method for Measurement of Thickness of Anodic
Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current
Instruments
B 530 – Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited
Nickel Coatings on Magnetic and Nonmagnetic Substrates
A 220M (1999) A 220/A 220M
A 221 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 222 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
Discontinued Replaced By
A 223 (1947)
A 296 – Discontinued 1980; Replaced by A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application, and A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for
Severe Service
A 297 – Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application
A 224 (1969) G 4 – Guide for Conducting Corrosion Coupon Tests in Field Applications
A 226/A 226M (1997) No Replacement
A 233 (1970) No Replacement
A 235 (1975) A 668 – Steel Forgings, Carbon and Alloy, for General Industrial Use
A 236 (1981) No Replacement
A 237 (1975) A 668 – Steel Forgings, Carbon and Alloy, for General Industrial Use
A 238 (1989) A 730 – Forgings, Carbon and Alloy Steel, for Railway Use
A 241 (1979) A 67 – Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A 243 (1975) A 668 – Steel Forgings, Carbon and Alloy, for General Industrial Use
A 244 (1947) A 504 – Wrought Carbon Steel Wheels
A 245 (1972) A 570 – Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality
A 611 – Structural Steel (SS), Sheet, Carbon, Cold-Rolled
A 246 (1958)
A 245 – Discontinued 1972; Replaced by A 570 – Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural
Quality
A 611 – Structural Steel (SS), Sheet, Carbon, Cold-Rolled
A 248 (1972) A 273 & A 274 – Discontinued 1975; Replaced by A 711 – Steel Forging Stock
A 251 (1970) No Replacement
A 253 (1962) No Replacement
A 256 (1990) No Replacement
A 257 (1945) A 34 – Practice for Sampling and Procurement Testing of Magnetic Materials
A 258 (1945) A 34 – Practice for Sampling and Procurement Testing of Magnetic Materials
A 259 (1945) A 34 – Practice for Sampling and Procurement Testing of Magnetic Materials
A 260 (1966) No Replacement
A 261 (1959) No Replacement
A 267 (1954) No Replacement
A 271 (1999) A 213 – Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A 272 (1945) E 109 – Discontinued 1981; Replaced by E 709 – Guide for Magnetic Particle Examination
A 273 (1975) A 711 – Steel Forging Stock
A 274 (1975) A 711 – Steel Forging Stock
A 277 (1952) A 338 – Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty
Service at Temperatures up to 650°F (345°C)
A 279 (1945) G 31 – Practice for Laboratory Immersion Corrosion Testing of Metals
A 280 (1953) A 335 – Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A 281 (1947) A 27 – Steel Castings, Carbon, for General Application
A 282 (1945) A 148 – Steel Castings, High Strength, for Structural Purposes
A 284/A 284M (1992) A 283 – Low and Intermediate Tensile Strength Carbon Steel Plates
A 286 (1960) A 434 – Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A 287 (1955) No Replacement
A 292 (1968) A 469 – Vacuum-Treated Steel Forgings for Generator Rotors
A 293 (1984) A 470 – Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A 294 (1988) A 471 – Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A 296 (1980) A 743 – Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion-Resistant, for General Application
A 744 – Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for Severe Service
A 298 (1970) No Replacement
A 300 (1975) No Replacement
A 301 (1956) A 387 – Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A 303 (1970) A 570 – Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality
A 305 (1968)
A 615 – Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A 616 – Rail-Steel Deformed and Plain Bars for Concrete Reinforcement
A 617 – Axle-Steel Deformed and Plain Bars for Concrete Reinforcement
A 306 (1975) A 663 – Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A 675 – Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A 310 (1949) Redesignated A 345 – Flat-Rolled Electrical Steels for Magnetic Applications
Discontinued Replaced By
A 315 (1952) A 335 – Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A 316 (1969) No Replacement
A 317 (1975) E 381 – Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
A 318 (1976) A 370 – Test Methods and Definitions for Mechanical Testing of Steel Products
A 326 (1990) No Replacement
A 329 (1965) A 551 – Steel Tires
A 330 (1954) A 370 – Test Methods and Definitions for Mechanical Testing of Steel Products
A 332 (1965) A 689 – Carbon and Alloy Steel Bars for Springs
A 337 (1955) A 392 – Zinc-Coated Steel Chain-Link Fence Fabric
A 339 (1965) A 536 – Ductile Iron Castings
A 344 (1977)
A 370 – Test Methods and Definitions for Mechanical Testing of Steel Products
A 712 – Test Method for Electrical Resistivity of Soft Magnetic Alloys
A 717 – Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A 718 – Discontinued 1996; No Replacement
A 719 – Test Method for Lamination Factor of Magnetic Materials
A 720 – Test Method for Ductility of Nonoriented Electrical Steel
A 346 (1998) No Replacement
A 347 (1996) No Replacement
A 349 (1984) No Replacement
A 357 (1973) A 387 – Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A 359 (1954) A 370 – Test Methods and Definitions for Mechanical Testing of Steel Products
A 360/A 360M (1993) No Replacement
A 361/A 361M (1995) No Replacement
A 362 (1977) No Replacement
A 364 (1959) A 434 – Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A 365 (1968) A 619 – Discontinued 1997; No Replacement
A 620 – Drawing Steel (DS) Sheet, Carbon, Cold-Rolled
A 366/A 366M (2000) A 1008 – Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability
A 371 (1969) No Replacement
A 373 (1966) Combined with A 36 – Carbon Structural Steel
A 374 (1971)
A 606 – Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric
Corrosion Resistance
A 607 – Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and
Cold-Rolled
A 375 (1971)
A 606 – Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric
Corrosion Resistance
A 607 – Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and
Cold-Rolled
A 378 (1955) A 345 – Flat-Rolled Electrical Steels for Magnetic Applications
A 379 (1955) A 345 – Flat-Rolled Electrical Steels for Magnetic Applications
A 382 (1971) No Replacement
A 383 (1996) No Replacement
A 386 (1984) A 123 – Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A 393 (1974) A 262 – Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A 395 (1988) A 395/A 395M – Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A 396 (1965) A 536 – Ductile Iron Castings
A 397 (1958) No Replacement
A 398 (1969) No Replacement
A 399 (1969) No Replacement
A 402 (1958) No Replacement
A 404 No Replacement
A 405 (1995) No Replacement
A 406 (1965) No Replacement
A 407M (1989) No Replacement
A 408 (1968) A 615 – Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A 410 (1976) No Replacement
Discontinued Replaced By
A 412 (1989) No Replacement
A 415 (1970) A 569 – Steel, Carbon (0.15 Maximum, Percent) Hot-Rolled Sheet and Strip Commercial Quality
A 417M (1989) No Replacement
A 419 (1971) No Replacement
A 422 (1994) No Replacement
A 425 (1970) A 569 – Steel, Carbon (0.15 Maximum, Percent) Hot-Rolled Sheet and Strip Commercial Quality
A 429 (1976) A 276 – Stainless Steel Bars and Shapes
A 430/A 430M (1995) A 312 – Seamless and Welded Austenitic Stainless Steel Pipes
A 431 (1968) A 615 – Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A 432 (1968) A 615 – Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A 433 (1972) No Replacement
A 440 (1979) No Replacement
A 441/A 441M (1989) A 572/A 572M – High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A 442/A 442M (1991) No Replacement
A 443 (1966) Combined with A 370 – Test Methods and Definitions for Mechanical Testing of Steel Products
A 444/A 444M (1995) A 929/A 929M – Steel Sheet Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A 445 (1974) A 395 – Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A 446/A 446M (1994)
A 653/A 653M – Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the HotDip Process
A 924/A 924M – General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A 448 (1976) No Replacement
A 452 (1995) No Replacement
A 454 (1980) No Replacement
A 457 (1990) No Replacement
A 458 (1991) No Replacement
A 461 (1971)
A 564 – Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A 637 – Discontinued; Redesignated B 637 – Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging
Stock for High-Temperature Service
A 638 – Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature
Service
A 639 – Discontinued; Redesignated B 639 – Precipitation Hardening Cobalt-Containing Alloys (UNS R30155
and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
A 462 E 165 – Test Method for Liquid Penetrant Examination
A 464 (1968) A 376 – Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A 465 (1975) No Replacement
A 468 (1969)
A 6 – General Requirements for Rolled Structural Steel Bars, Plates, Shapes,and Sheet Piling
A 341 – Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the
Ballistic Test Methods
A 476 (2000) A 476/A 476M-00 – Ductile Iron Castings for Paper Mill Dryer Rolls
A 476M (2000) A 476/A 476M-00 – Ductile Iron Castings for Paper Mill Dryer Rolls
A 477 (1991) No Replacement
A 486/A 486M (1989) No Replacement
A 502 (1999) F 1470 – Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
A 509 (1983) A 788 – General Requirements for Steel Forgings
A 518 M (1999) A 518/A 518 M – Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A 520-97 No Replacement
A 525/A 525M (1994)
A 653/A 653M – Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the HotDip Process
A 924/A 924M – General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A 526/A 526M (1994)
A 653/A 653M – Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the HotDip Process
A 924/A 924M – General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A 527/A 527M (1994)
A 653/A 653M – Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the HotDip Process
A 924/A 924M – General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A 528/A 528M (1994)
A 653/A 653M – Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the HotDip Process
A 924/A 924M – General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
Discontinued Replaced By
A 535 (1999) No Replacement
A 538/A 538M (1989) No Replacement
A 544 (1991) No Replacement
A 545 (1991) No Replacement
A 546 (1991) No Replacement
A 547 (1991) No Replacement
A 548 (1991) No Replacement
A 549 (1991) No Replacement
A 552 (1974) A 689 – Carbon and Alloy Steel Bars for Springs
A 557/A 557M (1995) A 178 – Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater
Tubes
A 558 (1969) No Replacement
A 559 (1969) No Replacement
A 566 (1984) No Replacement
A 567/A 567M (1987) No Replacement
A 568M (1991) A 568/A 568M – General Requirements for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled
and Cold-Rolled
A 569/A 569M (2000) A 1011/A 1011M – Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy with Improved Formability
A 570/A 570M (2000) A 1011/A 1011M – Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy with Improved Formability
A 590 (1984) No Replacement
A 593 (1976) No Replacement
A 594 (1986) No Replacement
A 599 A 599/A 599M-99 – Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A 605/A 605M (1989) No Replacement
A 607 (2000) A 1011/A 1011M – Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy with Improved Formability
A 611 (2000) A 1008 – Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability
A 613 (1984) No Replacement
A 614 (1987) No Replacement
A 615M (1993) A 615/A 615M – Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A 616/A 616M (1999) A 996/A 996M – Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A 617/A 617M (1999) A 996/A 996M – Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A 619/A 619M (1997) No Replacement
A 620/A 620M (2000) A 1008 – Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability
A 621/A 621M (1997) No Replacement
A 622/A 622M (2000) A 1011/A 1011M – Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy with Improved Formability
A 624M (1995) A 624/A 624M – Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A 625M (1992) A 625/A 625M – Tin Mill Products, Black Plate, Single Reduced
A 626M (1995) A 626/A 626M – Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A 628 (1982) No Replacement
A 631 (1993) A 583 – Cast Steel Wheels for Railway Service
A 634 (1978) No Replacement
A 635M (1991) A 635/A 635M – Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled
A 637 Redesignated B 637 – Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for HighTemperature Service
A 639 Redesignated B 639 – Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816)
Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
A 641M (1997) A 641/A 641M – Zinc-Coated (Galvanized) Carbon Steel Wire
A 642/A 642M (1994)
A 653/A 653M – Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the HotDip Process
A 924/A 924M – General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A 643 (1982) No Replacement
Discontinued Replaced By
A 647 (1982) No Replacement
A 650M-88 A 650/A 650M – Tin Mill Products, Black Plate, Double Reduced
A 651 (1987) No Replacement
A 652 (1984) No Replacement
A 654 (1984) No Replacement
A 655 (1984) No Replacement
A 658/A 658M (1989) No Replacement
A 661 Not Yet Assigned
A 665/A 665M (1998) A 876/A 876M – Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types [Metric]
A 667M (1987) A 667/A 667M – Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A 669 (1984) A 789 – Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A 670 Redesignated B 670 – Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for HighTemperature Service
A 676 (1990) No Replacement
A 677M (2000) A 677/A 677M – Nonoriented Electrical Steel, Fully Processed Types
A 680/A 680M (1986) A 684/A 684M – Steel, Strip, High-Carbon, Cold-Rolled
A 682M (1998) A 682/A 682M – General Requirements for Steel, Strip, High-Carbon, Cold-Rolled, Spring Quality
A 683M (1999) A 683/A 683M – Nonoriented Electrical Steel, Semiprocessed Types
A 685 (1986) A 681 – Tool Steels Alloy
A 687 (1999) No Replacement
A 698 (1992) A 698/A 698M – Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A 692 (1995) A 209 – Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A 699 (1986) No Replacement
A 708 (1989) No Replacement
A 715 (2000) A 1011/A 1011M – Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy with Improved Formability
A 718 (1996) No Replacement
A 722 (1995) A 722/A 722M – Uncoated High-Strength Steel Bar for Prestressing Concrete
A 725/A 725M (1988) A 876/A 876M – Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types [Metric]
A 726M (1998) A 726 – Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A 728 Not Yet Assigned
A 731/A 731M (1995) A 268 – Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A 749M (1991) A 749/A 749M – General Requirements for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled
A 766/A 766M (1991) No Replacement
A 776 Not Yet Assigned
A 777 (1995) No Replacement
A 783 (1987) No Replacement
A 784 (1988) No Replacement
A 785 (1988) No Replacement
A 791/A 791M (1995) A 268 – Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A 792M (1994) A 792/A 792M – Steel Sheet, 55 Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A 797 (1990) No Replacement
A 806/A 806M (1995) A 929/A 929M – Steel Sheet Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A 812/A 812M (1997) No Replacement
A 816/A 816M (1994)
A 653/A 653M – Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the HotDip Process
A 924/A 924Ma – General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A 819 (1995) A 929/A 929M – Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A 825 (1991) No Replacement
A 828 Not Yet Assigned
A 829 (1992) A 829/A 829M – Alloy Structural Steel Plates
A 830 (1992) A 830/A 830M – Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A 831 (1994) No Replacement
A 840 (2000) A 840/A 840M – Fully Processed Magnetic Lamination Steel
A 843 (1988) A 876/A 876M – Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types [Metric]
A 850 (1991) No Replacement
Discontinued Replaced By
A 863 (1991) No Replacement
A 864/A 864M (1997) No Replacement
A 868 Not Yet Assigned
A 869 Not Yet Assigned
A 870 Not Yet Assigned
A 873/A 873M (1997) No Replacement
A 874M (1999) A 874/A 874M – Feritic Ductile Iron Castings Suitable for Low-Temperature Service
A 876M (1998) A 876/A 876M – Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A 890 (1989) A 890/A 890M – Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for
General Application
A 906 (1993) A 906/A 906M – Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A 916 (1995) A 929/A 929M – Steel Sheet Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A 919 (1999) A 941 – Terminology Relating to Steel, Stainless Steel, Related Alloys and Ferroalloys
A 929 Redesignated A 929/A 929M – Steel Sheet Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A 948 Not listed
A 949 Redesignated A 949/A 949M– Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A 963/A 963M (2000) A 1008 – Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability
A 969/A 969M (2000) A 1008 – Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability