Manufacturer of Materials According to Indian Standard I.S Standard And Specifications

Manufacturer of Materials According to Indian Standard I.S Standard And Specifications

Manufacture of Material According to Indian Standard I.S Standard And Specification

  1. 1403(Pt 1):1993
    (ISO 7759:1985)
    Mechanical testing of metals – Reverse bend test Part 1 Sheet and
    Strip (second revision)
  2. 1493(Pt 5):1990
    (ISO 4693:1986)
    Method of chemical anlaysis of iron ores Part 5 Determination of
    copper content by atomic absorption spectrometric method
  3. 1493(Pt 6):1990
    (ISO 6831:1986)
    Part 6 Determination of sodium and/or potassium contents – Flame
    atomic absorption spectrometric method
  4. 1493(Pt 7):1973
    (ISO 8753:1989)
    Part 7 Determination of lead or zinc content flame atomic absorption
    spectrophotometric method (first revision)
  5. 1493(Pt 8):1993
    (ISO 7834:1987)
    Part 8 Determination of arsenic content – Molybdenum blue
    spectrophotometric method (first revision)
  6. 1500:2005
    (ISO 6506-1:1999)
    Method for brinell hardness test for metallic materials (third revision)
  7. 1501:2002
    (ISO 6507-1:1987)
    Method for Vickers hardness test for metallic materials (third revision)
  8. 1528(Pt 5):2007
    (ISO 5014:1997)
    Methods of sampling and physical tests for refractory materials, Part 5
    Method for determination of modulus of rupture at ambient temperature
    of dense and insulating shaped refractory products (third revision)
  9. 1528(Pt 9):2007
    ISO 5018:1983
    Part 9 Determination of true density (fourth revision)
  10. 1528(Pt 12):2007
    (ISO 5016:1997)
    Methods of sampling and physical tests for refractory materials Part 12
    Method for determination of bulk density and true porosity of shaped
    insulating refractory products (second revision)
  11. 1528(Pt 13):2007
    ISO 12676:2000
    Part 13 Determination of resistance to carbon monoxide (second
    revision)
  12. 1528(Pt 15):2007
    (ISO 5017:1998)
    Methods of sampling and physical tests for refractory materials Part 15
    Method for determination of bulk density, apparent porosity and true
    porosity of dense shaped refractory products (first revision)
  13. 1528(Pt 16):2007
    ISO 8894-2:1990
    Methods of sampling and physical tests for refractory materials Part 16
    Determination of thermal conductivity according to hot-wire method
    (parallel) (first revision)
  14. 1528(Pt 17):1993
    (ISO 8895:1986)
    Part 17 Determination of cold crushing strength of shaped insulating
    refractory products
  15. 1528(Pt 18):1993
    (ISO 3187:1989)
    Part 18 Determination of creep in compression
  16. 1528(Pt 20):1993
    (ISO 5013:1985)
    Part 20 Determination of modulus of rupture at elevated temperature
  17. 1528(Pt 21):2007
    ISO 8894-1:1987
    Part 21 Determination of thermal conductivity according to hot-wire
    method (cross-array)
  18. 1528(Pt 22):2007
    ISO 8841:1991
    Part 22 Methods for determination of permeability to gases of dense
    shaped refractory products
  19. 1528(Part 23):2011
    (ISO16282:2007)
    Method of test for dense shaped refractory product – Part 23
    Determination of resistance to abrasion at ambient temperature
  20. 1586(Part 1):2012
    (ISO 6508-1:2005
    Metallic materials- Rockwell hardness test Part 1 Test method (Scales
    A, B, C, D, E, F, G, H, K, N,T (fourth revision)
  21. 1586(Part 2):2012
    (ISO 6508-2:2005)
    Metallic materials- Rockwell hardness test Part 2 Verification and
    calibration of testing machines (Scales A, B, C, D, E, F, H, K, N,T)
    (fourth revision)
  22. 1586(Part 3):2012
    (ISO 6508-3:2005)
    Metallic materials- Rockwell hardness test Part 3 Calibration of
    reference blocks (Scales A, B, C, D, E, F, G, H, K, N,T) (fourth
    revision)
  23. 1599:2012
    (ISO 7438:20050
    Metallic materials – Bend test (third revision)
  24. 1608:2005
    (ISO 6892:1998)
    Metallic materials – Tensile testing at ambient temperature (third
    revision)
  25. 1717:2012
    (ISO 7800:2003)
    Metallic materials – Wire – Simple torsion test (third revision)
  26. 1754:2002
    /ISO 6507-2:1997
    Method for verification of Vickers hardness testing machines (third
    revision)
  27. 1828(Pt 1):2005
    (ISO 7500-1:1999)
    Metallic materials – verification of static uniaxial testing machines Part
    1 Tension/Compression testing machines – Verification and calibration
    of the force-measuring system (third revision)
  28. 1828(Pt 2):2002
    (ISO 7500-2:1996)
    Part 2 Tension creep testing machines – verification of applied load
  29. 1993:2006
    (ISO 11949:2009)
    Single cold-reduced tinplate and single cold reduced black plate –
    electrolytic and hot dipped tinplate sheets and black plate sheet (third
    revision)
  30. 2281:2005
    (ISO 6506-2:1999)
    Method for verification of brinell hardness testing machines (third
    revision)
  31. 2328:2005
    (ISO 8492:1998)
    Metallic materials – Tube flattening test (second revision)
  32. 2329:2005
    (ISO 8491:1986)
    Metallic materials – Tube (in full section) – Bend test (second revision)
  33. 2330:2011
    (ISO 8494:1998)
    Metallic materials – Tube – Flanging test (second revision)
  34. 2335:2005
    (ISO 8493:1998)
    Metallic materials – Tube drift expanding test (second revision)
  35. 3600(Pt 3):2009
    (ISO 4136):2001
    Methods of testing of non-welding joints and weld metal in steel Part 3
    Transverse tensile test on butt welds
  36. 3600(Pt 5):1983
    (ISO 5173:1981)
    Methods of testing of non-welding joints and weld metal in steel Part 5
    Transverse root and bend test on butt weld (second revision)
  37. 3600(Pt 6):1993
    (ISO 5177:1981)
    Part 6 Transverse side and bend test on butt weld (second revision)
  38. 3711:2012
    (ISO 377:1997)
    Steel and steel products – Location and preparation of samples and
    test pieces for mechanical testing (second revision)
  39. 3803(Pt 1):1989
    (ISO 2566-1:1984)
    Steel – conversion of elongation value Part 1 Carbon and Low alloy
    steels (second revision)
  40. 3803(Pt 2):1989
    (ISO 2566-2:1984)
    Steel – conversion of elongation values Part 2 Austenitic steels
    (second revision)
  41. 4041:2006
    (ISO 836:2001)
    Terminology for refractories (first revision)
  42. 4132:2005
    (ISO 6506-3:1999)
    Method for calibration of standardized blocks to be used for brinell
    hardness testing machines (second revision)
  43. 4133:2002
    (ISO 6507-3:1997)
    Method for calibration of standardized blocks to be used for Vickers
    hardness testing machines (second revision)
  44. 4163:2004
    (ISO 4967:1998)
    Steel – Determination of content of nonmetallic inclusions –
    Micrographic method using standard diagrams (third revision)
  45. 4258:2011
    (ISO 18265:2003)
    Metallic materials – Conversion of hardness values (second revision)
  46. 4748:2009
    (ISO 643:2003)
    Steel – Micrographic determination of the apparent grain size (second
    revision)
  47. 4840:2006
    (ISO 4490:2001)
    Metallic powders – Determination of flow time by means of a calibrated
    funnel (Hall flow meter) (second revision)
  48. 4857:2005
    (ISO 3927:2001)
    Metallic powders, excluding powders for hard metals – Determination
    of compactibility (compressibility) in uniaxial compression (fourth
    revision)
  49. 5642:1991
    (ISO 2738:1987)
    Permeable sintered metal materials – Determination of density, oil
    content, and open porosity (second revision)
  50. 5644(Pt 1):1993
    (ISO 4491-1:1997)
    Metallic powders – Determination of oxygen content by reduction
    methods, Part 1 General guidelines (third revision)
  51. 5644(Pt 2):2005
    (ISO 4491-2:1997)
    Part 2 Loss of mass on hydrogen reduction (hydrogen loss) (fourth
    revision)
  52. 5644(Pt 3):2005
    (ISO 4491-4:1997)
    Part 3 Hydrogen reducible oxygen (fourth revision)
  53. 5644(Pt 4):1993
    (ISO 4491-4:1989)
    Part 4 Total oxygen by reduction extraction (third revision)
  54. 5652(Pt 1):1993
    (ISO 3728-1:1982
    Hard metals- Rockwell hardness test (Scale A) Part 1 Test method
    (second revision)
  55. 6016:2009
    (ISO 3253:1998)
    Gas welding equipment – Hose connections for equipment, welding,
    cutting and allied processes (second revision)
  56. 6885(Part 1):2011
    (ISO 4545-1:2005)
    Metallic materials – knoop hardness test Part 1 Test method (first
    revision)
  57. 6885(Pt 2):2011 Metallic materials – Knoop hardness test Part 2: Verification and
    calibration of testing machines (first revision)
  58. 6885(Pt 3):2011
    (ISO 4545-
    3:260.005)
    Metallic materials- Knoop hardness test Part 3: Calibration of reference
    blocks (first revision)
  59. 6885(Part 4):2011
    (ISO 4545-4:2005)
    Metallic materials – Knoop hardness test Part4 Table of hardness
    values(first revision)
  60. IS 6901:2009
    (ISO 2503:1998)
    Specification for pressure regulators for gas cylinders used in welding,
    cutting and related processes (first revision)
  61. 8871:2004
    (ISO 3953:1993)
    Metallic powders – Determination of tap density (second revision)
  62. 8910:2010
    (ISO 404:1992)
    General technical delivery requirements for steel and steel products
    (first revision)
  63. 9025:1993
    (ISO 1111-2:1983)
    Single cold-reduced tinplate and single cold-reduced black plate –
    electrolytic tinplate coil and black plate coil for subsequent cutting into
    sheet form (first revision)
  64. 10175:2012
    (ISO 20482:2003)
    Metallic materials – Sheet and strip – Erichsen cupping test (second
    revision)
  65. 10793:1983
    (ISO 6520:1982)
    Classification of imperfection in metallic fusion welds with explanations
  66. 11506:2004
    (ISO 13944:1996)
    Method for determination of lubricant content of lubricated metallic
    powder by soxhlet extraction (first revision)
  67. 11999:2007
    (ISO 10113:1991)
    Method for determination of plastic strain ration `r’ for sheet metals
    (first revision)
  68. 12228:1987
    (ISO 4746:1977)
    Scale adhesion test for oxygen free copper
  69. 12260:1987
    (ISO 8495:1986)
    Ring expanding test on metallic tubes
  70. 12278:2011
    (ISO 8496:1998)
    Metallic materials – Tube – Ring tensile test (first revision)
  71. 12279:2005
    (ISO 3325:1996)
    Sintered metal materials (excluding hardmetals) – Determination of
    transverse strength (first revision)
  72. 12591:2006
    (ISO 11950:1995)
    Cold-reduced electrolytic chromium/chromium oxide coated steel (first
    revision)
  73. 12871:2011
    ISO 12743:2006)
    Copper, lead, zinc and nickel concentrates – Sampling procedure for
    determination of metal and moisture content
  74. 12872:2011
    (ISO 9513:1999)
    Metallic materials – verification of extensometers used in uniaxial
    testing
  75. 12893:2006
    (ISO 1146:1998)
    Pyrometric reference cones for laboratory use – Specification (first
    revision)
  76. 13007:1991
    (ISO 6848:1984)
    Tungsten electrodes for inert gas shielded arc welding and for plasma
    cutting and welding
  77. 13043:1991
    (ISO 2401:1972)
    Covered manual metal arc welding electrodes – Determination of
    efficiency, metal recovery and deposition co-efficient
  78. 13691:1993
    (ISO 4970:1979)
    Steel – Determination of total or effective thickness of thin surface hard
    metals layers
  79. 13780:1993
    (ISO 4506:1979)
    Hard metals – Compression test
  80. 13781:1993
    (ISO 4003:1977)
    Permeable sintered metal materials – Determination of bubble test
    pore size
  81. 13782:1993
    (ISO 4022:1987)
    Permeable sintered metal materials – Determination of fluid
    permeability
  82. 13803:1993
    (ISO 3312:1987)
    Sintered metal materials and hard metals – Determination of young
    modulus
  83. 13954:1994 (ISO
    4977-1:1988)
    Double cold-reduced electrolytic tin plate sheet
  84. 13955:1994
    (ISO 4977-2:1988)
    Double cold-reduced electrolytic tin plate sheet for subsequent cutting
    into sheets
  85. 14126:1994
    (ISO 2177:1985)
    Metallic coatings – measurement of thickness coluometric method
  86. 14149:1994
    (ISO 3543:1981)
    Metallic and non-metallic coating – measurement of thickness – Beta
    backscatter method
  87. 14644(Pt 1):1998
    (ISO 7530-1:1990)
    Nickel alloys – Flames atomic absorption spectrometric analysis Part 1
    General requirements and sample dissolution
  88. 14644(Pt 2):1998
    (ISO 7530-2:1990)
    Part 2 Determination of cobalt content
  89. 14644(Pt 3):1998
    (ISO 7530-3:1990)
    Part 3 Determination of chromium content
  90. 14644(Pt 4):1998
    (ISO 7530-4:1990)
    Part 4 Determination of copper content
  91. 14644(Pt 5):1998
    (ISO 7530-5:1990)
    Part 5 Determination iron content
  92. 14644(Pt 6):1998
    (ISO 7530-6:1990)
    Part 6 Determination of manganese content
  93. 14644(Pt 7):2000
    (ISO 7530-7:1990)
    Part 7 Determination of aluminium content
  94. 14644(Pt 8):2000
    (ISO 7530-8:1990)
    Part 8 Determination of silicon content
  95. 14644(Pt 9):2000
    (ISO 7530-9:1990)
    Part 9 Determination of vanadium content
  96. 14741:1998
    (ISO 8654:1987)
    Colours of gold alloys – Definition, range of colours and designation
  97. 15326(Pt 1):2003
    (ISO 3834-1:1994)
    Quality requirements for welding – Fusion welding of metallic materials
    Part 1 Guidelines for selection and use
  98. 15326(Pt 2):2003
    (ISO 3834-2:1994)
    Part 2 Comprehensive quality requirements
  99. 15326(Pt 3):2003
    (ISO 3834-3:1994)
    Part 3 Standards quality requirements
  100. 15326(Pt 4):2003
    (ISO 3834-4:1994)
    Part 4 Elementary quality requirements
  101. 15327:2003
    (ISO 14731:1997)
    Welding coordination – Tasks and responsibility
  102. 15387:2003
    (ISO 5830:1984)
    Resistance spot welding – male electrode caps
  103. 15426:2004
    (ISO 14250:2000)
    Steel – Metallographic characterization of duplex grain size and
    distributions
  104. 15554:2004
    (ISO 2740:1999)
    Sintered metal materials, excluding hard metals – Tensile test piece
  105. 15567:2005
    (ISO 3928:1999)
    Sintered metal material, excluding hard metal – Fatigue test piece
  106. 15574:2005
    (ISO 5754:1978)
    Sintered metal materials excluding hardmetals – Unnotched impact test
    piece
  107. 15585:2005
    (ISO 5755:2001)
    Sintered metal materials – Specification
  108. 15728:2006
    (ISO 15620:2000)
    Welding friction welding of metallic materials
  109. IS 15703:2006
    (ISO 4498:2005)
    Sintered metal materials, excluding hardmetals – Determinaiton of
    apparent hardness and microhardness
  110. IS 15756:2007
    (ISO 10275:1993)
    Metallic Materials- Sheet and Strip – Determination of Tensile Strain
    Hardening Exponent
  111. IS 15839:2009
    (ISO 13520:2002)
    Determination of ferrite content in Austenitic stainless steel castings
  112. IS 15892:2011
    (ISO 8653:1986)
    Jewellery – Ring sizes – Definition Measurement and Designation
    113 IS 15893:2010
    (ISO 10713:1992)
    Jewellery – Gold alloy coating
  113. IS 16002(Pt 1):2012
    (ISO 7652-1:2003)
    Welding – Test for shop primers in relation to welding and allied
    processes Part 1 General requirements
  114. IS 16002 (Pt
    2):2012
    (ISO 17652-2:2003)
    Welding – Test for shop primers in relation to welding and allied
    processes Part 2 Welding properties of shop primers
  115. IS 16002 (Pt
    3):2012
    (ISO 17652-3:2003)
    Welding – Test for shop primers in relation to welding and allied
    processes Part 3 Thermal cutting
  116. IS 16002 (Pt Welding – Test for shop primers in relation to welding and allied
    4):2012
    (ISO 17652-4:2003)
    processes Part 4 Emission of fumes and gases
  117. IS 16003:2012
    (ISO15607:2003)
    Specification and qualification of welding procedures for metallic
    materials – General rules
  118. IS 16051(Pt 1):2013
    (ISO 12678-1:1996)
    Refractory products – Measurement of dimensions and external
    defects of refractory bricks – Part 1 Dimensions and conformity to
    drawings
  119. IS 16051(Pt 2):2013
    (ISO 12678-2:1996)
    Refractory products – Measurement of dimensions and external
    defects of refractory bricks – Part 2 Corner and edge defects and other
    surface imperfections
  120. IS 16052(Pt 1):2013
    (ISO 13765-1:2004)
    Refractory mortars Part 1 Determination of consistency using the
    penetrating cone method
  121. IS 16052(Pt 2):2013
    (ISO 13765-2:2004)
    Refractory mortars Part 2 Determination of consistency using the
    reciprocating flow table method
  122. IS 16052(Pt 3):2013
    (ISO 13765-3:2004)
    Refractory mortars Part 3 Determination of joint stability
  123. IS 16052(Pt 4):2013
    (ISO 13765-4:2004)
    Refractory mortars part 4 Determination of flexural bonding strength
  124. IS 16052(Pt 5):2013
    (ISO 13765-5:2004)
    Refractory mortars Part 5 Determination of grain size distribution (sieve
    analysis)
  125. IS 16052(Pt 6):2013
    (ISO 13765-6:2004)
    Refractory mortars Part 6 Determination of moisture content of readymixed mortars
  126. IS/ISO 3057:1998 Non-Destructive testing – Metallographic replica technique of surface
    examination
  127. IS/ISO 3183:2007 Petroleum and natural gas industries – Steel pipe for pipeline
    transportation system (Amal`gmation of IS 1978 & IS 1979)
  128. IS/ISO 4507:2000 Sintered ferrous materials, carburized or carbonitrided – Determination
    and verification of case-hardening depth by a micro-hardness test
  129. IS/ISO 5580:2010 Non-destructive testing radiographic illuminators – minimum
    requirements
  130. IS/ISO 7452:2002 Hot rolled structural steel plates- Tolerance on dimensions and shape
  131. IS/ISO 10474:1991 Steel & Steel products – Inspection document
  132. IS/ISO 11951:1995 Cold reduced blackplate in coil form the production of tinplate or
    electrolytic chromium/chromium oxide-coated steel
  133. IS/ISO 14284:1996 Steel and iron sampling and preparation of samples for the
    determination of chemical composition
  134. IS/ISO 16124:2004 Steel wire rod – Dimensions and tolerances
  135. IS/ISO 16160:2005 Continuous hot rolled steel sheet products – Dimensional and shape
    tolerance
  136. IS/ISO 16162:2005 Continuous cold-rolled steel sheet products – Dimensional and shape
    tolerance
  137. IS/ISO 16163:2005 Continuous hot dipped coated steel products dimensional & shape
    tolerances
    1 4 SP 2 : 1982 Comparison of Indian and overseas basic sizes for sheet and
    Wire (first revision)
    2 15 IS 7:1980 Moderate heat duty fireclay refractories group B (Withdrawn)
    3 7 IS 20:1977 Superseded by IS 617:1994
    4 7 IS 22:1950 98 pecent aluminium notched bars and ingots for remelting
    Purposes (tentative)(Withdrawn) (see IS 2590)
    5 11 IS 24:1956 Brazing solder (revised) (Superseded by IS 2927:1950)
    6 7 IS 29:1950 Aluminium sheet and coils for aircraft purpose (Withdrawn)
    7 7 IS 30:1953 Aluminium coated high-tensile aluminium alloy sheets and coils
    for aircraft purposes (Withdrawn)
    8 7 IS 31:1950 Aluminium manganese alloy sheets and coils (Withdrawn) (see
    IS 737:1986)
    9 11 IS 192:1956 Silver solder (revised) (Superseded by IS 2927:1975)
    10 15 IS 194:1950 Recommendations for refractories for railways (Withdrawn)
    11 3 IS 223:1950 Tensile testing of metals (ferrous) (Withdrawn)
    12 6 IS 224:1979 Foundry pig iron for general purposes (see IS 13502:1992)
    13 6 IS 225:1969 Pig iron (charcoal) (second revision) (Withdrawn)
    14 4 IS 226:1975 Structural steel (standard quality) (fifth revision) (Superseded by
    IS 2062:1992)
    15 6 IS 227:1954 Malleable iron castings (Withdrawn) (see IS 2107 and 2108)
    16 13 IS 372:1962 Manganese ore-battery grade (tentative) (Withdrawn) (see IS
    1449 & 1473)
    17 13 IS 373:1952 Manganese ore metallurgical grade (tentative) (Withdrawn)-(see
    IS 4763 and 1473)
    18 24 IS 429:1954 Methods for testing weight and uniformity of coatings on
    Galvanized iron and steel wires and steel sheets (Superseded
    by IS 2633) (Withdrawn)
    19 9 IS 441:1955 Methods for chemical analysis of brasses and
    bronzes(Withdrawn)
    20 32 IS 442:1954 Drums for paints (Superseded by IS 2552:1989)
    21 15 IS 485:1954 Methods of sampling and testing of refractory materials
    (Tentative)(Withdrawn)(see IS 1527, IS 1528 Part I to 14)
    22 3 IS 497:1953 Tensile testing of metals (non-ferrous) (Withdrawn)
    23 14 IS 503:1963 Alloy austenitic manganese steel castings (Withdrawn) (see IS
    276)
    24 4 IS 597:1978 Pack-rolled tinplate and pack rolled black plate (second revision)
    (see IS 1993:2006)
    25 32 IS 618:1956 Kegs (open top drums) for paints (Superseded by IS 2552:1989)
    26 4 IS 727:1964 Hard drawn carbon steel wire for springs for general engineering
    pruposes (revised) (Withdrawn) (see IS 4454(Pt 1):2001)
    27 24 IS 728:1956 Methods for determining of weight, thicikness and uniformity of
    Coating on galvanised articles other than wires and sheets
    (Superseded by IS 2633)
    28 7 IS 735:1956 Wrought aluminium and aluminium alloys forging stock (for
    General engineeing purposes ) (Superseded by IS 734:1975)
    29 11 IS 815:1974 Classification coding of covered electrodes for metal arc welding
    Of structural steels (second revision) (Superseded by IS
    814:1991)
    30 11 IS 823:1964 Code of procedure for manual metal arc welding of mild steel
    (Withdrawn)
    31 4 IS 961:1975 Structural steel (high tensile) (second revision) (Superseded by
    IS 8500)
    32 9 IS 998:1959 Methods of chemical analysis of soft solder (Withdrawn)
    33 5 IS 1111:1964 Spiegeleisen (revised) (Withdrawn)
    34 8 IS 1138:1958 Sizes of metal strip, sheet brass (round square)flats and plate
    For structural and general engineering purpose (Withdrawn)
    35 4 IS 1149:1982 High tensile steel rivet bars for structural purposes (third
    revision)
    36 11 IS 1181:1967 Qualifying tests for metal arc welders (engaged in welding
    structuresother than pipes ) (first revision) [(Superseded by IS
    7318(Part 1):1974]
    37 9 IS 1279:1958 Electrically welded mild steel boilers and superheater tubes for
    Design steam temperatures not exceeding 155 degree
    centigrade or 850 degree centrigrade (Superseded by IS 1914)
    38 2 IS 1338:1959 Specification for certified samples for metallurgical analysis
    (withdrawan)
    39 9 IS 1339:1992 Lead and lead alloys for sheathing of electric cables (third
    revision)
    40 9 IS 1345:1960 Methods of chemical analysis of printing metal
    41 9 IS 1357:1984 Printing type metal ingots (third revision)
    42 8 IS 1385:1968 Phosphor bronze rods and bars, sheet and strip and wire (first
    revision) (Superseded by IS 7608:1987, IS 7811:1985 and IS
    7814:1985)
    43 32 IS 1413:1970 Round vanaspati tins (first revision ) (Superseded by IS
    10339:1988)
    44 11 IS 1442:1964 Covered electrodes for metal arc welding of high tensile
    Structural steel (revised) (Superseded by IS 814)
    45 3 IS 1501(Part 1):1984 Part 1 HV 5 to HV 100 (second revision) (Superseding IS
    1810:1961, IS 2866:1968 and IS 9258:1979) (third revision)
    46 3 IS 1501(Part 2):2005 Part 2 HV 0.2 to less than HV 5 (second revision)
    47 3 IS 1501(Part 3):1987 Part 3 Less than HV 0.2 (second revision)
    48 3 IS 1521:1972 Method for tensile testing of steel wire (first revision)
    (Superseded by IS 1608:1995)
    49 6 IS 1538(Part 1):1976 General requirements (superseded by IS 1538:1993)
    50 6 IS 1538(Part 2):1976 Specific requirements for sockets and spigots of pipes
    (superseded by IS 1538:1993)
    51 6 IS 1538(Part 3):1976 Specific requirements for sockets of fittings (superseded by IS
    1538:1993)
    52 6 IS 1538(Part 4):1976 Specific requirements for flanges of pipes and fittings
    (superseded by IS 1538:1993)
    53 6 IS 1538(Part 5):1976 Specific requirements for raised flanges (Superseded by IS
    1538:1993)
    54 6 IS 1538(Part 6):1976 Specific requirements for standard flange drilling of flanged
    Pipes and fittings (Superseded by IS 1538:1993)
    55 6 IS 1538(Part 7):1976 Specific requirements for flanged sockets (superseded by IS
    1538:1993)
    56 6 IS 1538(Part 8):1976 Specific requirments for flanged spigots (superseded by IS
    1538:1993)
    57 6 IS 1538(Part 9):1976 Specific requirements for collars (superseded by IS 1538:1993)
    58 6 IS 1538(Part 10):1976 Specific requirements for double socket bends (superseded by
    IS 1538:1993)
    59 6 IS 1538(Part 11):1976 Specific requirements for tees,all sockets (superseded by IS
    1538:1993)
    60 6 IS 1538(Part 12):1976 Specific requirements for double socket tee with flanged branch
    (superseded byIS 1538:1993)
    61 6 IS 1538(Part 13):1976 Specific requirements for crosses, all sockets (superseded by IS
    1538:1993)
    62 6 IS 1538(Part 14):1984 Specific requirements for double socket tapers (third revision)
    (superseded byIS 1538:1993)
    63 6 IS 1538(Part 15):1976 Specific requirements for caps (superseded by IS 1538:1993)
    64 6 IS 1538(Part 16):1976 Specific requirements for plugs (superseded by IS 1593:1993)
    65 6 IS 1538(Part 17):1976 Specific requirements for bell mouth pieces (superseded by IS
    1538:1993)
    66 6 IS 1538(Part 18):1976 Specific requirements for double flanged bends (superseded by
    IS 1538:1993)
    67 6 IS 1538(Part 19):1976 Specific requirements for all flanged tees (superseded by IS
    1538:1993)
    68 6 IS 1538(Part 20):1976 Specific requirements for all flanged crosses (superseded by IS
    1538:1993)
    69 6 IS 1538(Part 21):1976 Specific requirements for double flanged tapers (superseded by
    IS 1538:1993)
    70 6 IS 1538(Part 22):1976 Specific requirements for split puddle or body flanges
    (superseded by IS 1538:1993)
    71 6 IS 1538(Part 23):1976 Specific requirements for blank flanges (superseded by IS
    1538:1993)
    72 6 IS 1538(Part 24):1984 Specific requirements for all flanged radial tees (second
    revision) (superseded by IS 1538:1993)
    73 2 IS 1546:1960 Method for determination of arsenic in iron and steel
    (Withdrawn) (see IS 228(Part 13):1982
    74 32 IS 1549:1960 Steel drums and kegs (galvanized and ungalvanized)
    (Withdrawn) (see IS 2552 :1989)
    75 8 IS 1550:1967 Copper sheet and strip for utensils and for general purposes
    (first revision) (Superseded by IS 14811:2000)
    76 16 IS 1570:1961 Schedules for wrought steels for general engineering purposes
    77 31 IS 1660(Part 2):1972 Cookery colanders [incorporated as IS 1660 (Part 1)]
    78 31 IS 1660(Part 3):1972 Pans patty (jelly mould) for baking [incorporated in IS 1660(Part
    1)]
    79 31 IS 1660(Part 4):1977 General requirements [incorporated in IS 1660(Part 1)]
    80 3 IS 1663:1972 Method for tensile testing of steel sheet and strri of thickness 0.5
    mm to 3 mm(first revision) (Superseded by IS 1608:1995)
    81 3 IS 1692:1974 Method for simple bend testing of steel sheet and strip less than
    3 mm thick (first revision) (Superseded by IS 1599:1983)
    82 3 IS 1754(Part 1):1986 Part I HV 0.2 to HV 100 (third revision)
    83 3 IS 1754(Part 2):1986 Part 2 Less than HV 0.2 (second revision)
    84 3 IS 1756:1974 Methods of modified arichsen cupping test for steel sheet and
    strip(first revision ) (Superseded by IS 10175:1982)
    85 29 IS 1760:1962 Methods of chemical analysis of limestone,dolomite and allied
    materials (withdrawn)
    86 32 IS 1783(Part 3):1983 Drums, large, fixed ends, Grade C drums (second revision)
    (Withdrawn)
    87 3 IS 1789:1961 Method for Brinell hardness test for grey cast iron (Superseded
    by IS 1500:1983)
    88 3 IS 1790:1961 Method for brinell hardness test for light metals and their alloys
    (Superseded by IS 1500:1983)
    89 3 IS 1810:1961 Method for Vickers hardness test for light metals and their alloys
    (superseded by IS 1501:1984)
    90 3 IS 1816:1979 Method for tensile test for light metals and their alloys (first
    revision) (Superseded by IS 1608:1995)
    91 7 IS 1841:1978 EC grade aluminium rod produced by rolling (second revision)
    (Withdrawn)
    92 7 IS 1847:1961 99.7 percent primary aluminium notched bars and ingots for
    remelting for aircraft purposes (Superseded by IS 23:1980)
    93 3 IS 1894:1972 Method for tensile testing of steel tubes (first revision)
    (Superseded by IS 1608:1995)
    94 19 IS 1914(Part 1-4):1982 Carbon steel boilers tubes and superheater tubes (second
    revision)
    95 13 IS 1917:1962 Method of chemical anlaysis of quartizite and high silica sand
    96 8 IS 1972:1989 Copper plate, sheet and strip for industrial purposes (second
    revision) (Superseded by IS 14811:2000)
    97 4 IS 1977:1996 Low tensile structural steels (third revision) (Superseded by IS
    2062:2006)
    98 13 IS 2000:1962 Method of chemical analysis of bauxite
    99 4 IS 2040:1962 Steel bars for stays (Withdrawn) (see IS 1990:1973)
    100 15 IS 2045:1962 Natural sillimanite blocks for glass melting tanks furnaces
    (Withdrawn)
    101 4 IS 2073:1970 Specification for carbon steel black bars for production of
    machined parts forgeneral engineering purposes (first revision)
    (Withdrawn)(see IS 7283:1974)
    102 3 IS 2078:1979 Method for tensile testing of grey cast iron (first revision)
    (Superseded by IS1608:1995)
    103 6 IS 2107:1977 Whiteheart malleable iron castings (Superseded by IS
    14329:1995)
    104 6 IS 2108:1977 Blackheart malleable iron castings (Superseded by IS
    14329:1995)
    105 10 IS 2278:1963 Fine gold bar, sheet, wire, granules and token (LAGDI or
    MOHUR) (Withdrawn)
    106 8 IS 2313:1963 Phosphor copper ingot (Withdrawn)
    107 3 IS 2348:1963 Method for drift expanding test on copper and copper alloy tubes
    (Superseded byIS 2335:1985)
    108 8 IS 2371:1973 Solid drawn copper alloy tubes for condensers, evaporators,
    Heaters and cooler tubes using saline hard water (Withdrawn)
    (Superseded by IS 1545:1982)
    109 8 IS 2456:1963 Brass strip for pen nibs (withdrawn)
    110 19 IS 2484:1979 Dimensions for steel tubes for bicycle purposes (withdrawn)
    111 4 IS 2517:1963 Bright bars for threaded components (Withdrawn)
    112 21 IS 2598:1966 Safety code for industrial radiographic practice
    113 9 IS 2600:1964 Methods of chemical analysis of high purity zinc and zinc base
    Alloys for die casting (Withdrawn)
    114 6 IS 2640:1977 Pearlitic malleable iron castings (superseded by IS
    114329:1995)
    115 3 IS 2654:1977 Method for tensile testing of copper and copper alloys (first
    revision) (Superseded by IS 1608:1995)
    116 3 IS 2655:1964 Method for tensile testing of copper and copper alloy tubes
    (Superseded by IS 1608:1995)
    117 3 IS 2656:1964 Method for tensile testing of copper and copper alloy wires
    (Superseded by IS 1608:1995)
    118 3 IS 2657:1964 Method for tensile testing of aluminium and aluminium alloy tube
    (Superseded byIS 1608:1995)
    119 3 IS 2658:1964 Method for tensile testing for aluminium and aluminium alloy wire
    (Superseded by IS 1608:1995)
    120 11 IS 2680:1964 Filler rods and wire for inert gas tungsten arc welding
    Withdrawn) (see IS 5856,,IS 5897, IS 6419 and IS 6560)
    121 22 IS 2756:1965 Method for estimating the average grain size of wrought copper
    And copper base alloys (Withdrawn) (see IS 4748)
    122 6 IS 2841:1978 Pig iron for special purposes (Superseded by IS 13502:1992)
    123 6 IS 2842:1980 Basic pig iron for steel making purposes (Superseded by IS
    13502:1992)
    124 22 IS 2853:1964 Methods of determining austenitic grain size in steel
    (Superseded by IS 4748)
    125 3 IS 2866:1968 Method for vickers hardness test for copper and copper alloys
    (Superseded by IS1501(Pt 1):1984)
    126 20 IS 2983:1971 Recommended practice for hot tinning of brassware (first
    revision) (Withdrawn)
    127 14 IS 3021:1975 Bentonite for use in foundries (Withdrawn) (see IS 12446:1988)
    128 3 IS 3054:1965 Method for Brinell hardness test for copper and copper alloys
    (Superseded by IS 1500:1983)
    129 8 IS 3057:1965 Copper sheets for photo process engravings
    130 29 IS 3200(Part 3):1991 Part 3 Determination of total aluminium by ccomplexometric
    Method (first revision)
    131 29 IS 3200(Part 8):1992 Part 8 Determination of phosphorus pentroxide and silica (first
    revision)
    132 3 IS 3260:1965 Method for bend test for copper and copper alloys (Superseded
    by IS1599:1975)
    133 8 IS 3285:1965 Copper strip for electrical purposes withdrawn or rolled edged
    (above 150 mm width) (withdrawn) (Superseded by IS
    1897:1983)
    134 8 IS 3332:1965 Nickel silver strip and foil for telecommunication purposes
    Withdrawn) (Superseded by IS 2283:1981)
    135 3 IS 3388:1965 Method for wrapping test for copper and copper alloy wire
    (Superseded by IS 1755:1983)
    136 3 IS 3408:1965 Method for non-interrupted creep testing of steel at elevated
    temperature (Superseded by IS 3407(Part 1):1983
    137 3 IS 3409:1965 Method for creep stress rupture testing of steel of elevated
    temperature [Superseded by IS 3407 (Part 2):1983]
    138 4 IS 3422:1966 Code of practice for packaging of steel and steel products for
    Export purposes (withdrawn)
    139 7 IS 3435:1968 99 Percent secondary aluminium notched bars and ingots for
    remelting for aircraft purposes (Withdrawn)
    140 6 IS 3486:1966 Cast iron spigot and socket drain pipes (Withdrawn)
    141 8 IS 3487:1994 Copper-Cold rolled strip and foil for gaskets, washers and
    Eyelets (first revision) (Superseded by IS 14811 :2000)
    142 8 IS 3488:1980 Brass bars, rods and sections suitable for forging (first revision)
    (Supersededby IS 6912)
    143 4 IS 3503:1966 Steel for marine boilers, pressure vessels and welded machinery
    structures (withdrawn)
    144 10 IS 3541:1981 Code of practice for manufacturers of 23.3 and lowe carat gold
    alloys (first revision) (Superseded by IS 2740:1999)
    145 19 IS 3609:1966 Chrome molybdenum steel, seamless, boiler and superheater
    tubes
    146 14 IS 3666:1966 Tests for foundry core oils (Superseded by IS 9009:1992)
    147 6 IS 3684:1966 Metals for casting moveable types (Withdrawn)
    148 31 IS 3695:1966 Thick bottom aluminium utensils (Redesignated as IS 1660 Part
    VI)
    149 4 IS 3747:1982 Hot rolled steel plates and sheets for flanging and pressing (first
    revision) (Superseded by IS 5986:1992)
    150 16 IS 3749:1978 Tool and die steels for cold work (first revision) (Superseded by
    IS3748:1990)
    151 3 IS 3754:1988 Method for calibration of standardized blocks to be used for
    Rockwell hardness testing machines(Scales A-B-C-D-E-F-G-H-
    K) (first revision) ( Superseded by IS 1586 :2000)
    152 3 IS 3804:1988 Method for calibration of Rockwell hardness testing machines
    (Scales A-B-C-D-E-F-G-H-K)(first revision) (Superseded by IS
    1586 :2000)
    153 4 IS 3835:1966 Aluminized steel core wire for aluminium conductors (ACSR)
    (withdrawn)
    154 4 IS 3945:1966 Steel for naval purposes (withdrawn)
    155 31 IS 3981:1967 Sigries (Withdrawn)
    156 4 IS 4030:1973 Cold rolled carbon steel strip for general engineering purposes
    (first revision) (Superseded by IS 513:1986)
    157 8 IS 4077:1967 Copper-nickel shot (Withdrawn) (Superseded by IS 5743:1970)
    158 31 IS 4136:1967 Aluminium Compartmental trays (Superseded by IS 1660(Part
    6):1980)
    159 14 IS 4140:1978 Limestone for use in foundries (first revision)
    160 3 IS 4168:1967 Method for wrapping test of aluminium and aluminium alloy wire
    (Superseded by IS 1755:1983)
    161 3 IS 4176:1967 Method for simple torsion test of aluiminum and aluminium alloy
    Wire (Superseded by IS 1717:1985)
    162 3 IS 4177:1967 Method for flattening test of aluminium and aluminium alloy tubes
    (Superseded by IS 2328:1983)
    163 19 IS 4310:1967 Weldable steel pipe fittings for marine purposes
    164 14 IS 4331(Part 1):1980 Comparison of Indian and overseas standards for steel castings
    Part Steel castings for general engineering purposes (first
    revision)(Withdrawn)
    165 18 IS 4369:1967 Steel bars
    for forgings (Withdrawn) (Superseded by IS 1875:1992)
    166 14 IS 4476:1975 Crane-suspended hand-operated geared ladles for steel
    Foundries (first revision)(Superseded by IS 4475(Pt 1 – 4)
    167 19 IS 4516:1968 Elliptical mild steel tubes
    168 3 IS 4598:1968 Method for simple bend test for aluminium and aluminium alloy
    Sheet and strip of thickness betweenn 0.2 mm and 7 mm
    (Superseded by IS 1599:1985)
    169 3 IS 4599:1968 Method for drift expanding test on aluminium and aluminium
    Alloy tubes (Superseded by IS 2335:1985)
    170 3 IS 4713:1968 Method for determination off lower yield stress, proof stress and
    proving test ffor steel at elevated temperatures (Superseded by
    IS 1608:1995)
    171 31 IS 4823:1981 Brass table utensils (first revision) (Withdrawn)
    172 4 IS 4855:1968 Bright steel bars for machining (Withdrawn) (Superseded by IS
    7270:1974 and IS7271:1974)
    173 18 IS 4901:1968 Code of practice forgings (Withdrawn) (Superseded by IS 7743)
    174 19 IS 4922:1968 Seamless steel tubes (suitable for welding) for aircraft purposes
    175 11 IS 4944:1968 Code of practice for welding at low ambient temperature
    (withdrawn)
    176 6 IS 5020:1969 Hematite pig iron (Withdrawn) (Superseded by IS 13502:1992)
    177 6 IS 5021:1969 Acid-resisting high-silica pig iron (withdrawn) (Superseded by IS
    13502:1992)
    178 3 IS 5071:1969 Method for flattening test for copper and copper alloy tubes of
    circular section (Superseded by IS 2328:1983)
    179 3 IS 5072:1988 Methods for Rockwell superficial hardness test (Scales 15N,
    30N, 45N, 15T, 30Tand 45T) (first revision) (Superseded by IS
    1586 2000)
    180 3 IS 5073:1988 Method for verification of Rockwell superficial hardness testing
    machines (Scales 15N,30N,45N, 15T,30T and 45T) (first
    revision) (Superseded by IS 1586 :2000)
    181 3 IS 5076:1988 Method for calibration of standardized blocks to be used for
    rockwellsuperficial hardness testing machines (Scales
    15N,30N,45N,15T,30T and 45T) (first revision) (Superseded by
    IS 1586 :2000)
    182 31 IS 5136:1981 Brass serving utensils (first revision) (Withdrawn)
    183 4 IS 5239:1969 Wire rod for the manufacture of aluminized steel core wire for
    aluminium conductors (withdrawn)
    184 24 IS 5243:1969 Tin coated finish for cooking utensils (Withdrawn)
    185 4 IS 5272:1969 Carbon steel sheets for integral coaches (Superseded by IS
    5986:1992)
    186 24 IS 5274:1969 Recommended practice for hot dip tinning of plain carbon steels
    (Withdrawn)
    187 10 IS 5320:1969 Fine silver ingot (Withdrawn) (see IS 2229)
    188 24 IS 5358:1969 Hot dip galvanized coatings on fasteners (Superseded by IS
    1367(Part 13):1982
    189 11 IS 5462:1969 Colour code for identification of covered electrodes and metal
    arc welding (Withdrawn)
    190 13 IS 5483:1969 Method for determination of specific gravity of iron ores, pellets
    and sinters (Superseded by IS 11896:1986)
    191 8 IS 5494:1969 Leaded brass sheets and strips for use in manufacture of
    tubewell strainers (withdrawn)
    192 3 IS 5619:1970 Recommendations for fatigue testing of metals(withdrawn)
    193 31 IS 5765:1970 Box,lunch, aluminium [Redesignated as IS 1660(Part VII)]
    194 13 IS 5843:1970 Method of measuring the bulk density of iron ore and iron ore
    agglomerates including sinters in a large container (applicable
    for size over 40mm) (Superseded by IS 5842:1986)
    195 7 IS 5902:1970 Aluminium and aluminium alloy rivet stock for cold forged rivet
    foraircraft purposes (Withdrawn) (see IS 8513:1977,IS
    8514:1977,IS8515:1977,IS 8936:1978,IS 8937:1978 and IS
    8938:1978)
    196 7 IS 5909:1970 Aluminium and aluminium manganese alloy sheet and strip for
    aircraft purposes (Withdrawn) (Superseded IS 7882:1975 and IS
    7883:1975)
    197 19 IS 5929:1970 Inspection and testing procedure for circular steel tubes for
    Aircraft purposes
    198 4 IS 5993:1970 Aluminized steel wire for telegraph and telephone purposes
    (withdrawn)
    199 2 IS 6010:1971 Recommended practice for photographic processing in
    spectrochemical analysis (withdrawan)
    200 19 IS 6011:1970 Carbon steel tubes for use on board ships for pressure services
    201 32 IS 6093:1971 Methods of determining the capacity and dimensions of
    hermetically sealed metalfoodcontainers (superseded by IS
    12219-1987)
    202 11 IS 6227:1971 Code of practice for use of metal arc welding in tubular structure
    (Superseded by IS 9595)
    203 3 IS 6253:1971 Method for simple torsion testing of copper and copper alloy wire
    (Superseded by IS 1717:1985)
    204 6 IS 6331:1987 Automotive grey iron castings (first revision) (Supeseding by IS
    210:2009)
    205 8 IS 6517(Part 1):1972 Methods of chemical analysis of copper master alloys (Pt 1) –
    Determination of copper nickel alloy
    206 3 IS 6520:1972 Method for the determination of K-values of a tensile testing
    system_(withdrawn)
    207 3 IS 6878:1973 Method of reverse bend testing of copper and copper alloy wire
    (Superseded by IS 1716:1985)
    208 3 IS 6885:1973 Method for Knoop hardness testing of metals (Superseded by IS
    6885 (Pt 1):2011)
    209 4 IS 6914:1978 Cast billets ingots and continuously cast billets for rolling into
    structural steel(standard quality) (first revision) (Superseded by
    IS 2830:1992)
    210 4 IS 6915: Cast billet ingots and continuously cast billets for rolling into
    structural steel: ordinary quality (first revision) (Superseded by
    IS 2831)
    211 32 IS 7024:1973 Ghee and edible oil tins (round and square) (Superseded by IS
    10339:1988)
    212 7 IS 7094:1984 Aluminium and aluminium alloy welded tube for general
    engineering purposes (first revision) (withdrawn)
    213 3 IS 7095:1973 Method for verification of Knoop hardness testing machines
    (Superseded by IS 6885 (Pt 2):2011)
    214 3 IS 7097:1973 Method for calibration of standardized blocks for verification of
    Knoop hardness testing machines (Superseded by IS 6885 (Pt
    3):2011)
    215 4 IS 7270:1974 Bright bars (standard quality) (Withdrawn) (Superseded by IS
    9550:1980)
    216 4 IS 7271:1974 Bright bars (ordinary/commerical quality) (withdrawn)
    (Superseded by IS 9550)
    217 21 IS 7281:1974 Code of practice for immersed ultrasonic testing by the reflection
    method usingpulse longitudinal waves (Withdrawn) (Superseded
    by IS 3664)
    218 4 IS 8051:1976 Steel ingots and billets for the production of volute, helical and
    laminated springs for automotive suspension
    219 4 IS 8053:1976 Steel ingots and billets for the production of steel wire for the
    manufacture of wood screws
    220 4 IS 8054:1976 Steel ingots and billets for productionjof laminated springs
    (railway rolling stock) (superseded by IS 8052:1990)
    221 4 IS 8055:1976 Steel ingots and billets for the production of spring washers
    222 4 IS 8056:1976 Steel ingots and billets for the production of hard drawn steel
    wire for upholstry springs
    223 4 IS 8057:1976 Steel ingots and billets for the production of wire rod for the
    manufacture of machine screws (by cold heading process)
    224 3 IS 8285:1976 Method for tensile test of copper and copper alloy rolled flat
    product (thickness less than 2.5 mm) (Superseded by IS
    1608:1995)
    225 4 IS 8500:1991 Structural steel – microalloyed (medium and high strength
    qualities)(first revision) (Superseded by IS 2062:2006)
    226 10 IS 8844:1978 Guidelines for marking purity of gold on gold articles/ornaments
    (Superseded byIS 1417:1999)
    227 4 IS 9025:1993 Single cold reduced tinplate and single cold reduced black plate
    electrolytic tinplate coil and blackplate coil for subsequent cutting
    into sheet form (first revision)
    228 3 IS 9258:1979 Method for vickers micro-hardness testing of metals
    [(Superseded by IS 1501(Part 3:1984)]
    229 21 IS 9346:1979 Recommended practice for certification of NDT personnel for
    ultrasonic examination (Superseded by IS 13805:1993)
    230 4 IS 9467:1980 Steel ingots and billets for production of rivet bars for structural
    purposes
    231 4 IS 9468:1980 Steel ingots and billets for production of mild steel rivet bars for
    Ship building
    232 4 IS 9477:1980 Steel ingots and billets for hot rolled bars for the production of
    bright bars
    233 14 IS 9731:1980 Steel castings for general engineering purposes (Withdrawn)
    234 2 IS 10113:1982 Recommended practice for calibration of emulsion for
    Photographic photometry (withdrawan)
    235 25 IS 10441:1991 Mettalic powders- Determination of apparent density- oscillating
    funnel method (first revision) (Withdrawn)
    236 3 IS 10588:1983 Tables of Brinell hardness values for use in test made on flat
    surfaces
    237 8 IS 10723:1983 Aluminium silicon bronze rods and bars
    238 4 IS 10787:1984 Hot rolled micro alloyed steel plate sheet and strip for
    Manufacturers of low liquifiable gas cylinders (Superseded by
    IS 6240:1999)
    239 3 IS 10927(Part 1):1984 Tables of Vickers hardness values for use in tests made on flat
    surface Part 1 HV 5 to HV 100 (Superseded by IS 1501:2002)
    240 3 IS 10927(Part 2):1984 Part 2 HV 0.2 to less than 5 (Superseded by IS 1501:2002)
    241 3 IS 10927(Part 3):1991 Part 3 Less than HV 0.2 (Superseded by IS 1501:2002)
    242 7 IS 11040:1984 Dimensions for wrought aluminium and aluminium alloys,welded
    tube (withdrawn)
    243 32 IS 11258:1985 10- and 20 kg square tins for vanaspati ghee and edible oils
    (Withdrawn)
    244 25 IS 12216:1987 Tantalum cavbide powder (withdrawn)
    245 25 IS 12217:1987 Niobium carbide powder (withdrawn)
    246 4 IS 13954:1994 Double cold-reduced electrolytic tinplate sheet
    247 4 IS 13955:1994 Double cold reduced electrolytic tinplate coil for subsequent
    cutting into sheets
    248 9 IS 13982:1994 Zinc Alloy for Hot Dip Coatings- Zinc-5 Percent Aluminium-
    Mischmetal Alloy- Specification
    249 30 IS 14718:1999 Method for determination of impact index of HBI
    Alloy Steels and Forgings Sectional Committee- MTD 16
  138. 1875:1992 Carbon steel billets, blooms, slabs and bars for 6
    forgings
  139. 2004: 1991 Carbon steel forgings for general engineering 1
    purposes
  140. 4432:1988 Case hardening steel 1
  141. 5517:1993 Steels for hardening and tempering 1
    Corrosion Protection and Finishes – MTD 24
  142. 1337:1993 Electroplated coatings of hard chromium 1
    on iron and steel
    Ferro Alloys
  143. 1171:1996 Ferromanganese 1
  144. 1470:1990 Siliconmanganese 1
    Cast Iron- MTD 6
  145. 1536:2001 Pressure pipes for water gas and sewagecentrifugally cast (spun) iron pipes 8
  146. 1537:1976 Vertically cast iron pressure pipes for water, gas, 2
    sewage
  147. 1538:1993 Cast iron fittings for pressure pipes for water, 10
    gas sewage
  148. 1729:2002 Cast iron/ductile iron drainage pipes and pipe fittings 23
    for over ground non pressure pipeline socket and spigot
    series
  149. 1879:2010 Pipe fittings – Malleable cast iron 114
  150. 3989:2009 Centrifugally cast (spun) iron spigot and socket 11
    soil, waste and ventilating pipes, fittings and
    accessories
  151. 5531:1988 Cast iron specials for asbestos-cement 4
    pressure pipes for water, gas and sewage
  152. 7181:1986 Cast iron double flanged pipes for water, gas and 18
    Sewage – Horizontally
  153. 8329:2000 Centrifugally cast (spun) ductile iron pressure 19
    pipes for water, gas and sewage
  154. 8794:2002 Pipes (pressure)- cast iron detachable joints for 39
    use with asbestos cement
  155. 9523:2000 Ductile iron fittings for pressure pipes for water, gas 15
    and sewage
  156. 13382:2004 Cast iron specials for mechanical & push on
    flexible joints for pressure pipes lines for water, gas 1
    and sewage
  157. 13502:1992 Pig iron 1
    Metal Containers – MTD 32
  158. 916:2000 Tins – 18 litre square 5
  159. 1783(Pt. 1) Drums, large, fixed ends – grade A drums 25
    1993
  160. 1783(Pt. 2) Drums, large, fixed ends – grade B drums 33
    1988
  161. 1784:1998 Closures (screwed) for drums 3
  162. 2552:1989 Drums (steel) (galvanized and ungalvanized) 3
  163. 3575:1993 Drums – Bitumen 21
  164. 9396(Pt. 1) Open top sanitary cans (round) for processed 1
    1987 foods – Tinplate requirements
  165. 10325:2000 Square tins – 15 kg for ghee, vanaspati, edible 14
    oils and bakery shortenings
  166. 13997:1994 Drums, large open top 14
    Non Ferrous Metals and Their Alloys:
    Copper and Copper Alloys – MTD 8
  167. 1897:1983 Copper strips for electrical purposes for ETP 1
    Grade of (A) thickness 1 mm to 10
    Light Metals and their alloys, MTD 7
  168. 21:1992 Wrought Alloys and its alloys – sheets and 1
    strip for utensils
  169. 5484:1997 EC grade aluminium rod produced by continuous
    Casting and rolling 1
  170. 7092(Pt 2):1987Aluminium alloy tube for irrigation purposes ` Part 2
    Extruded tube 8
    Precious Metals – MTD 10
  171. 1417:1999 Gold and gold alloys – Jewellery artefacts – 10805
    fineness and marking
  172. 2112:2003 Grades of silver and silver alloys (first revison) 711
    Steel Tubes, Pipes and Fittings, MTD 19
  173. 1161:1998 Structural purpose – steel tubes 113
  174. 1239(Pt 1): Mild Steel tubes, tubular and other wrought 142
    :2004 steel fittings
  175. 1239(Pt 2): Mild Steel tubes, tubular and other wrought 19
    :1992 steel fittings- Mild steel tubular and other
    wrought steel pipe fittings
  176. IS/ISO 3183:2007Petroleum and natural gas industries `steel pipe for pipe
    Line transportation systems 7
  177. 3589:2001 Water, gas and sewage – steel pipes( 168.3 to 82
    2032mm (OD) seamless or electrically welded
  178. 3601:2006 Steel tubes for mechanical and General Engineering 51
    purposes
  179. 4270:2001 Steel tubes used for water wells 38
  180. 4923:1997 Hollow steel sections for structural use 50
  181. 5504:1997 Spiral welded pipes 11
  182. 6392:1971 Steel pipe flanges 5
  183. 9295:1983 Idlers for belt conveyers – steel tubes 31
  184. 10577:1982 Lancing pipes 1
  185. 11722: 1986 Thin walled flexible quick coupling pipes 2
    Steel Castings, MTD 14
  186. 276:2000 Austenitic Manganese Steel Castings 1
  187. 1030:1998 Carbon steel castings for general engineering purposes 1

Welding – MTD 11

  1. 814:2004 Covered electrodes for manual metal arc welding 158
    of carbon and carbon manganese steels
  2. 5206:1983 Covered electrodes for manual metal arc welding of
    Stainless steel and other similar high alloy steels 1
  3. 6901:1988 Pressure regulators for gas cylinders used in 9
    welding cutting and related processes
  4. 7653:1975 Manual blow pipes for welding and cutting 11
    Wrought Steel-MTD 4
  5. 277:2003 Galvanized steel sheets (plain and corrugated) 38
  6. 280:2006 Mild steel wire for general engineering purposes 31
  7. 513:2008 Cold rolled low carbon steel sheets and strips 12
  8. 648:2006 Non oriented electrical steel sheets and strips 8
    for magnetic circuits
  9. 1079:2009 Hot rolled carbon steel sheet and strip 11
  10. 1835:1976 Round steel wire for ropes 1
  11. 1993:1993 Cold reduced electrolytic tinplate 3
  12. 2002:2009 Steel plates for pressure vessels for intermediate 10
    and high temperature service including boiler
  13. 2041:2009 Hot rolled medium and high tensile structural steel 4
  14. 2062:2011 Hot rolled medium & high tensile structural steel 287
  15. 2830:2012 Carbon steel cast billet ingots, billets,blooms and 379
    and slabs for re-rolling into steel for general
    structural purposes
  16. 2831:2012 Carbon steel cast billets ingots, billets, blooms and slabs 68
    for re-rolling into structural steel (ordinary quality)
  17. 2879:1998 Mild steel for metal arc welding electrode core wire 12
  18. 3024:2006 Grain oriented electrical steel sheets and strips 5
  19. 3502:2009 Steel chequered plates 3
  20. 3975:1999 Mild steel wires, formed wires and tapes for 21
    armoring of cables
  21. 4454(Part 1) Steels wires for mechanical springs, Part 1 Cold drawn
    2001 Steel unalloyed steel wire 1
  22. 5872:1990 Cold rolled steel strips (box strapping) 2
  23. 5986:2011 Hot rolled steel flat products for structural forming 9
    and flanging purposes
  24. 6240:2008 Hot rolled steel plate (upto 6 mm)sheet and strip 9
    for manufacture of low pressure liquifiable gas
    cylinder
  25. 7283:1992 Hot rolled bars for production of bright bars and 1
    mechanical parts for engineering purposes
  26. 7887:1992 Mild steel wire rods for general engineering 17
    purposes
  27. 10748:2004 Hot rolled steel strips for welded tubes and pipes 19
  28. 11513:2011 Hot rolled carbon steel strip for cold rolling
    purposes 6
  29. 14650:1999 Carbon steel cast billet, ingots, billet, blooms & 23
    slabs for re-rolling purpose
  30. 15391:2003 Cold rolled non-oriented electrical steel and strip 3
    Delivered I semi-processed state
  31. 15647:2006 Hot rolled steel narrow strip for welded tubes & pipes 1
    5 FERROUS METAL PIPES AND METALLIC FITTINGS P
    SC 1 Steel Tubes P
    SC 2 Cast Iron Pipes, Fittings and Their Joints P
    SC 10 Metallic flanges and their joints O
    17 STEEL P
    SC 1 Methods of determination of chemical composition O
    SC 3 Steel for Structural Purposes P
    SC 4 Heat Treatable and Alloy Steel O
    SC 7 Method of Testing (Other than Mechanical Tests
    And Chemical Analysis)
    SC 9 Tinplate and blackplate P
    SC 10 Steel for Pressure Purposes P
    SC 11 Steel Castings P
    SC 12 Continuous Mill Flat Products P
    SC 16 Steels for Reinforcement and Pre Stressing of concrete O
    SC 17 Steel Wire Rod and Wire Products P
    SC 19 Technical Delivery Condition for Steel Tubes
    For Pressure Purposes P
    18 ZINC AND ZINC ALLOYS O
    25 CAST IRON AND PIG IRON P
    SC 1 Malleable Cast Iron P
    SC 2 Spheroidal Graphite, ferritic-perlitic and austenitic cast
    Iron P
    SC 3 Grey Cast Iron (revision ISO/R 185 P
    26 COPPER AND COPPER ALLOYS O
    33 REFRACTORIES P
    44 WELDING AND ALLIED PROCESSES P
    SC 3 Welding consumables P
    SC 5 Testing and Inspection of Welds P
    SC 6 Resistance welding P
    SC 7 Representation and terms P
    SC 8 Equipment for gas welding, cutting and allied processes P
    SC 10 Unification of Requirements in the Field of P
    Metal Welding
    SC 12 Soldering and brazing materials P
    52 LIGHT GAUGE METAL CONTAINERS O
    SC 4 Open top containers O
    SC 5 General use containters O
    SC 6 Aerosol containers O
    67 MATERIAL, EQUIPMENT AND OFFSHORE STRUCTURES FOR P
    PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    SC 2 Pipeline transportation system P
    SC 5 Casing tubing & drill pipe P
    79 LIGHT METALS AND THEIR ALLOYS O
    SC 1 Methods of chemical and spectro-chemical analysis O
    SC 4 Unalloyed (refined) aluminium ingots O
    SC 5 Magnesium and alloys of cast or wrought magnesium O
    SC 6 Wrought aluminium and aluminium alloys P
    SC 7 Aluminium and cast aluminium alloys O
    SC 9 Symbolization O
    SC 11 Titanium O
    102 IRON ORES P
    SC 1 Sampling P
    SC 2 Chemical Analysis P
    SC 3 Physical Testing P
    107 METALLIC AND OTHER INORGANIC COATINGS O
    119 POWDER METALLURGY` P
    129 ALUMINIUM ORES O
    132 FERRO ALLOYS P
    135 NON-DESTRUCTIVE TESTING P
    SC 2 Surface method P
    SC 3 Acoustical method P
    SC 4 Eddy current methods P
    SC 5 Radiaton methods P
    SC 6 Leak detection methods P
    SC 7 Personnel qualification P
    SC 8 Infrared thermography for NDT P
    SC 9 Acoustic emission testing P
    155 NICKEL AND NICKEL ALLOYS O
    156 CORROSION OF METALS AND ALLOYS O
    164 MECHANICAL TESTING OF METALS O
    SC 1 Uniaxial testing O
    SC 3 Hardness testing O
    Sc 4 Toughness testing – Fracture (F), Pendulum (P), Tear (T) O
    174 JEWELLERY P
    175 FLUORSPAR O
    183 COPPER LEAD AND ZINC ORES AND CONCENTRATE O
    196 ORNAMENTAL ROCKS O
    201 SURFEROUS CHEMICAL ANALYSIS O
    202 MICROBEAN ANALYSIS O
    229 NANOTECHNOLOGIES P

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate,
NACE HIC TM-0284 / NACE MR-0103 / NACE MR-0175 / ISO 15166, CE Marked, European Pressure Equipment Directive PED-2014/68/EU, AD-2000-WO,
ASME Boiler & Pressure Vessel Code Section-II Part A Edition 2019, API 6A (American Petroleum Institute), with 3.2 Certificate duly Certified &
Approved by IBR (Indian Boiler Regulations), LR Class (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas),
ABS Class (American Bureau of Shipping), SGS, TUV, RINA, IR Class (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 – 9820292499
Email – marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
57-A Khatargalli
Thakurdwar
Mumbai – 400 002 India
0091-22-23858802
0091-22-23823963
0091-22-23898724
marketing@rolexmetals.com
www.rolexmetals.com

CHAIRMAN – chairman@rolexmetals.com
MANAGING DIRECTOR – managingdirector@rolexmetals.com
TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com
SALES DIRECTOR – salesdirector@rolexmetals.com
COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com
COMMERCIAL MANAGER – commercial@rolexmetals.com
GENERAL MANAGER – generalmanager@rolexmetals.com
SALES MANAGER – salesmanager@rolexmetals.com
PURCHASE MANAGER – purchasemanager@rolexmetals.com
TECHNICAL MANAGER – technical@rolexmetals.com
WORKS MANAGER – worksmanager@rolexmetals.com
STORES MANAGER – stores@rolexmetals.com
WAREHOUSE MANAGER – warehouse@rolexmetals.com
SALES DOMESTIC – salesdomestic@rolexmetals.com
SALES INTERNATIONAL – salesinternational@rolexmetals.com
SALES GENERAL – sales@rolexmetals.com
PURCHASE GENERAL – purchase@rolexmetals.com
FINANCE MANAGER – finance@rolexmetals.com
ACCOUNTS MANAGER – accounts@rolexmetals.com
GENERAL INFORMATION – info@rolexmetals.com
EXPORT MANAGER – export@rolexmetals.com
IMPORT MANAGER – import@rolexmetals.com
AIR EXPORT – airexport@rolexmetals.com
SEA EXPORT – seaexport@rolexmetals.com
CUSTOMS – customs@rolexmetals.com
AIR FREIGHT – airfreight@rolexmetals.com
SEA FREIGHT – seafreight@rolexmetals.com
DESPATCH – despatch@rolexmetals.com
INSPECTION – inspection@rolexmetals.com
LOGISTICS – logistics@rolexmetals.com
TRANSPORT – transport@rolexmetals.com
KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com
TALOJA WAREHOUSE – taloja@rolexmetals.com
KHOPOLI WAREHOUSE – khopoli@rolexmetals.com
NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com
KANDLA WAREHOUSE – kandla@rolexmetals.com
MUMBAI WAREHOUSE – mumbai@rolexmetals.com
STOCKYARD – stockyard@rolexmetals.com
SERVICE – service@rolexmetals.com
SUPPORT – support@rolexmetals.com
RECRUITMENT – career@rolexmetals.com
WEBMASTER – webmaster@rolexmetals.com
CUSTOMER CARE – customercare@rolexmetals.com